Upload
lykhue
View
216
Download
0
Embed Size (px)
Citation preview
NEBOSH National General Certificate timetable
Day Time Element/Topics Tutor
Unit GC1 Management of health and safety
1 13/09/2018
9.00-12.30 Break 10.30
1. Foundation in H&S: Moral and financial reasons UK Court system
MT
13.00-17.30 Break 2.30&3.30
1. Foundation in H&S HSAWA, MHSWR
MT
2 20/09/2018
9.00-12.30 Break 10.30
2. HSMS - plan HGG65, OHSAS 18001, H&S policy
MO
13.00-17.30 Break 2.30&3.30
3. HSMS – Do Organisational aspects of H&S Safety culture
MO
3 27/09/2018
9.00-12.00 Break 10.30
3. HSMS – Do Human factor Behavioural Safety
MT
13.00-17.30 Break 2.30&3.30
3. HSMS – Do Risk assessment and prevention
MT
4 04/10/2018
9.00-12.00 Break 10.30 13.00-15.00
3. HSMS – Do Risk assessment and prevention Safe system of work PTW First aid
MT
15.30-17.30
4. HSMS – Check Reactive vs active monitoring
MT
5 11/10/2018
9.00-12.00 Break 10.30
4. HSMS – Check Accident and ill health investigation including Accident trend analysis & legal requirements
MT
13.00-17.00 Break 2.30&3.30
5. HSMS – Act H&S auditing Measuring performance
MT
STUDENTS SHOULD CARRY OUT 23 HOURS OF PRIVATE STUDY FOR UNIT GC1
Unit NGC2 Controlling workplace hazards
6 18/10/2018
9.00-17.30 Break 10.30 Lunch 12.30 Break 2.30&3.30
1. Workplace hazards and risk control Workplace & welfare and work environment Violence at work Substance misuse Slips/trips/falls Work at height Temporary nature hazards and controls: excavation, demolition, maintenance, renovation etc.
MT
7 25/10/2018
9.00-13.00 Break 10.30
2. Transport hazards and control Site, vehicle, people Risk assessment and controls
MT
14.00-17.00 Break 3.30
3. MSD hazards and risk control VDU, WRULD, MH
MT
8 01/11/2018
9.00-12.00 Break 10.30
3. MSD hazards and risk control Manual and powered load handling
MT
13.00-17.30 Break 2.30&3.30
4. Work equipment hazards and risk controls PUWER, BS EN ISO 12100 Compatibility Mechanical and non-mechanical hazards Hazard control in machinery
NM
9 8/11/2018
9.00-11.00 4. Work equipment hazards and risk controls Machinery guarding, maintenance Powered hand tools, suability (flammable atmosphere)
NM
11.30-12.30 13.00-15.00
5. Electrical safety MT
15.30-17.30 6. Fire Safety Fire initiation, classification and spread
MT
10 15/11/2018
9.00-13.00 Break 10.30
6. Fire safety Prevention and systems
MT
13.30-17.30 Break 3.30
7. Chemical and bio health hazard and risk control Classifications, risk assessment, EH40 & EU ILV, US (TLV)
MT
11 22/11/201
9.00-11.00
7. Chemical and bio health hazard and risk control OELs (STEL, WEL) Control measures re: asbestos, silica, wood dust, legionella, carbon monoxide, blood borne viruses
MT
11.30-12.30 13.00-15.00
8. Physical and psychological health hazards and risk control Noise Vibration Radiation –non-ionising and ionising including radon Stress
AP MT
STUDENTS SHOULD CARRY OUT 26 HOURS OF PRIVATE STUDY FOR UNIT GC2
Unit GC3 Health and Safety Practical application
11 22/11/2018
15.30-17.30 Practical application
STUDENTS SHOULD CARRY OUT 4 HOURS OF PRIVATE STUDY FOR UNIT GC3
12 29/11/2018
9.00-17.00 Break 10.30 Lunch 12.30 Break 2.30&3.30
Revision NGC1 and NGC2 MT
Exam: GC1 05/12/2018 am
GC2 05/12/2018 pm