NEW GEOMETRIES - ARNO USANew Geometries 12 ARNO®-Werkzeuge | New Geometries Inserts ak2110 Grade for roughing of cast iron and nodular cast iron. AK2110 has excellent wear resistance

NEW GEOMETRIES

• Cost-Effective• Precise• User Friendly• Modular• Reliable

for turning

ww

w.ar

nous

a.co

m

10/2012

ORdER 20 INSERTS OF 1 kINd

aNd GET a MaTChING hOldER FREE.*

* Promo applies to direct ships only, valid until 5/31/2013

2 ARNO®-Werkzeuge | New Geometries

For steel and stainless steel » Negative geometryBasis CN.. 1204-NM2

- NM2 Especially developed for medium machining of steel. The newly developed chip breaker guarantees optimum swarf formation. Excellent cutting edge stability and the reduced cutting temperature makes this insert first choice for perfor-mance machining.

Medium machining double sided

P M

P M k Universal geometry » Negative geometryBasis DN.. 1506-K

- k Universal geometry for finishing and medi-um machining of steel, stainless steel and cast iron. Soft-cutting geometry. First choice for long and thin working pieces.

Finishing and medium machining double sided

For steel and stainless steel » Negative geometry

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

Basis CN.. 1204-NS1

- NS1 Universal geometry for finishing of steel and stainless steel.

Finish machining double sided

P M

New Geometries

Geometry description

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

ARNO®-Werkzeuge | New Geometries 3

For steel, stainless steel and cast iron » Negative geometry

- NMG1 Universal geometry for roughing of steel, stainless steel and cast iron.

Basis CN.. 1204-NMG1

Roughing double sided

P M k

Basis CN.. 1204-NR1


- NR1 Geometry for heavy roughing of steel and stainless steel. 0° Rake angle and pimple chip breaker.

heavy roughing Single sided

P M

- NMR Geometry especially for stainless steel and exotic materials. The extremely sharp cutting edge make machining of very difficult materials possible.


Medium machining double sided

Basis CN.. 1204-NMR

M

New Geometries

Geometry description

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

0.008 0.016 0.024

0.24

0.16

0.8

f[Inch/U]

0

ap[Inch]

New Geometries

4 ARNO®-Werkzeuge | New Geometries All dimensions are in inch.

Inserts

h2

h1

Inserts

aNSI ISO Style Size h1/h2 b l1 l2 f

dClNR/l 124C DCLNR/L 2020 K12-.750CNMa CNMG CNMM CNGP

43 0,750 0,787 4,900 1,260 0,984dClNR/l 164d DCLNR/L 2525 M12-1.000 43 1,000 1,000 5,900 1,260 1,260dClNR/l 205E DCLNR/L 3232 P16-1.250 54 1,250 1,260 6,700 1,417 1,575dClNR/l 206E DCLNR/L 3232 P19-1.250 64 1,250 1,260 6,700 1,654 1,575dClNR/l 246h DCLNR/L 4040 S19-1.500 64 1,500 1,575 9,800 1,654 1,967dClNR/l 854E DCLNR/L 3225 P12-1.250 43 1,250 0,984 6,700 1,260 1,260

Inserts


ddJNR/l 123C DDJNR/L 2020 K11-.750dNMa dNMG dNGP

33 0,750 0,787 4,900 1,378 0,787ddJNR/l 124C DDJNR/L 2020 K15-.750 44 0,750 0,787 4,900 1,575 0,787ddJNR/l 164d DDJNR/L 2525 M15-1.000 44 1,000 1,000 5,900 1,575 1,260ddJNR/l 854E DDJNR/L 3225 P15-1.250 44 1,250 0,787 6,700 1,575 1,260

dClN R/l

ddJN R/l

New Geometries

All dimensions are in inch. ARNO®-Werkzeuge | New Geometries 5

Inserts

b

f

45°

l2

l1

h2

h1

f

93°

l2

b

l1

h2

h1

l2

f

95°

95° b

l1

h2

h1

Inserts


dVJNR/l 123C DVJNR/L 2020 K16-.750 VNMa VNMG VNGP

33 0,750 0,787 4,900 1,535 0,984dVJNR/l 163d DVJNR/L 2525 M16-1.000 33 1,000 1,000 5,900 1,535 1,260

Inserts


dWlNR 123C DWLNR 2020 K06-.750 WNMa WNMG WNGP

33 0,750 0,787 4,900 1,063 0,984dWlNR 124C DWLNR 2020 K08-.750 43 0,750 0,787 4,900 1,339 0,984dWlNR 164d DWLNR 2525 M08-1.000 43 1,000 1,000 5,900 1,339 1,260

Inserts


dSSNR/l 124C DSSNR/L 2020 K12-.750SNMa SNMG

43 0,750 0,787 4,900 1,378 0,984dSSNR/l 164d DSSNR/L 2525 M12-1.000 43 1,000 1,000 5,900 1,378 1,260dSSNR/l 854E DSSNR/L 3225 P12-1.250 43 1,250 0,984 6,700 1,378 1,260

dVJN R/l

dWlN R/l

dSSN R/l

description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

CNMG 431EN-NS1 CNMG 120404EN-NS1 0,500 0,016 40 l l l

CNMG 432EN-NS1 CNMG 120408EN-NS1 0,500 0,031 40 l l l

CNMG 431EN-NM2 CNMG 120404EN-NM2 0,500 0,016 40 l l l l

CNMG 432EN-NM2 CNMG 120408EN-NM2 0,500 0,031 40 l l l l

CNMG 433EN-NM2 CNMG 120412EN-NM2 0,500 0,047 40 l l l

CNMG 431EN-NMR CNMG 120404EN-NMR 0,500 0,016 40 l l l

CNMG 432EN-NMR CNMG 120408EN-NMR 0,500 0,031 40 l l l

CNMG 433EN-NMR CNMG 120412EN-NMR 0,500 0,047 40 l l

CNMG 432EN-NMG1 CNMG 120408EN-NMG1 0,500 0,031 40 l l l l l l

CNMG 433EN-NMG1 CNMG 120412EN-NMG1 0,500 0,047 40 l l l l l

CNMG 543EN-NMG1 CNMG 160612EN-NMG1 0,625 0,047 2 l l l



description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

CNMM 432EN-NR1 CNMM 120408EN-NR1 0,500 0,031 2 l l l




CNMG

CNMM

New Geometries

6 ARNO®-Werkzeuge | New Geometries l = Main application l = Secondary application All dimensions are in inch.

P l l l l l l

M l l l

k l l

NS l

h

P l l

M l

kNSh

Inserts

New Geometries

All dimensions are in inch. l = Main application l = Secondary application ARNO®-Werkzeuge | New Geometries 7

Inserts

description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

dNMG 442EN-NS1 dNMG 150608EN-NS1 0,500 0,031 2 l l l

dNMG 443EN-NS1 dNMG 150612EN-NS1 0,500 0,047 2 l l l

dNMG 331EN-NM2 dNMG 110404EN-NM2 0,375 0,016 2 l l





dNMG 441EN-NMR dNMG 150604EN-NMR 0,500 0,016 2 l l

dNMG 442EN-NMR dNMG 150608EN-NMR 0,500 0,031 2 l l

dNMG 443EN-NMR dNMG 150612EN-NMR 0,500 0,047 2 l

dNMG 442EN-NMG1 dNMG 150608EN-NMG1 0,500 0,031 2 l l l l

dNMG 443EN-NMG1 dNMG 150612EN-NMG1 0,500 0,047 2 l l l l

dNMG 441El-k dNMG 150604El-k 0,500 0,016 2 l l

dNMG 441ER-k dNMG 150604ER-k 0,500 0,016 2 l l

dNMG 442El-k dNMG 150608El-k 0,500 0,031 2 l l

dNMG 442ER-k dNMG 150608ER-k 0,500 0,031 2 l l

dNMG

P l l l l

M l l

k l

NS l

h

NEW

New Geometries

Inserts

8 ARNO®-Werkzeuge | New Geometries l = Main application l = Secondary application All dimensions are in inch.

description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

SNMG 432EN-NM2 SNMG 120408EN-NM2 0,500 0,031 2 l l

SNMG 432EN-NMG1 SNMG 120408EN-NMG1 0,500 0,031 2 l l l l

SNMG 433EN-NMG1 SNMG 120412EN-NMG1 0,500 0,047 2 l l l l

description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

VNMG 331EN-NS1 VNMG 160404EN-NS1 0,375 0,016 2 l l l

VNMG 331EN-NM2 VNMG 160404EN-NM2 0,375 0,016 2 l l

VNMG 332EN-NMR VNMG 160408EN-NMR 0,375 0,031 2 l

SNMG

VNMG

P l l l

M l

k l

NSh

P l l

M l l

k l

NSh

New Geometries

Inserts

All dimensions are in inch. l = Main application l = Secondary application ARNO®-Werkzeuge | New Geometries 9

description

aNSI ISO d r PG

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

WNMG 431EN-NS1 WNMG 080404EN-NS1 0,500 0,016 2 l l l

WNMG 432EN-NS1 WNMG 080408EN-NS1 0,500 0,031 2 l l l

WNMG 331EN-NM2 WNMG 060404EN-NM2 0,375 0,016 2 l l





WNMG 431EN-NMR WNMG 080404EN-NMR 0,500 0,016 2 l l



WNMG 432EN-NMG1 WNMG 080408EN-NMG1 0,500 0,031 2 l l l l

WNMG 433EN-NMG1 WNMG 080412EN-NMG1 0,500 0,047 2 l l l l

WNMG

P l l l l

M l l l

k l l

NS l

h

New Geometries

12 ARNO®-Werkzeuge | New Geometries

Inserts

ak2110 Grade for roughing of cast iron and nodular cast iron. AK2110 has excellent wear resistance and low tendency for build up edge. For the universal use on GG and GGG materials.

aM2110 For finishing of stainless steel. The very hard and micro fine coating give a very high tool life and improved wear resistance.

aM2130 Main grade for medium to heavy machining of stainless steel. The very hard and micro fine coating give a very high tool life and improved wear resistance. Also for suitable for interrupted cut.

aM5120 The grade for roughing stainless steel and machining of exotic materials, heat resistant and titanium alloys.

aP2110 Premium grade for “High Speed” machining of steel. Also suitable for roughing of cast iron and nodular cast iron.

aP2120 Grade for finishing and medium machining of steel in both un- interrupted and heavy interrupted cutting conditions. Excellent resistance to plastic deformation as well as fracturing. The alloyed carbide substrate with a fine grained aluminium oxide coating ensures high thermal resistance and excellent coating structure. AP2120 is the universal grade for steel machining.

aP2135 Grade for heavy roughing applications in steel materials. Extremely tough for heavy interrupted cuts and unfavourable conditions. The alloyed carbide substrate with the fine grained aluminium oxide coating ensures high thermal resistance and excellent coating structure.

aP2310 Main grade for medium to heavy machining of stainless steel. The very hard and micro fine coating give a very high tool life and improved wear resistance. Also for suitable for interrupted cut.

aP2320 Main grade for medium steel machining. Coating offer excellent resistance to plastic deformation and ultimate strength.

Grade description

For further information please ask for our complete catalogue. Please contact us.

ARNO®-Werkzeuge | New Geometries 13

New Geometries

Inserts

Cutting data

ISO Material

Brin

ell-h

ardn

ess

hB Cutting speed

VC [f/min]

ak21

10

aM21

10

aM21

30

aM51

20

aP21

10

aP21

20

aP21

35

aP23

10

aP23

20

P

Non alloy steel and cast steel

< 0,15 % C hardened and tempered 0,15 – 0,45 % C hardened and tempered > 0,45 % C tempered

125 984 1250 1050 890 1150 1050

190 853 1080 890 750 980 890

250 722 920 690 670 710 690

low alloy steel and cast steel

annealed hardened and tempered hardened and tempered hardened and tempered

180 787 980 820 690 890 820

275 689 850 660 520 790 660

300 590 720 520 390 620 520

350 525 660 390 300 490 390

high alloy steel and tool steel

annealed hardened and tempered

200 590 720 560 490 620 560

325 328 430 300 230 360 300

M Stainless steel

ferritic, martensitic annealed martensitic, hardened and tempered austenitic

200 670 520 520

240 480 360 360

180 590 460 460

k

Cast Ironferritic pearlitic/martensitic

180 984 790

260 754 590

Nodular cast ironferritic pearlitic

160 820 660

250 590 460

Malleable cast ironferritic pearlitic

130 820 660

230 623 490

Shigh temperature, resistand alloys

Fe-alloyedNi- or Co-basedNi- or Co-based

200 330

250 200

350 130

Pure titan 400

Titanium alloys, high strength 950 230

The data given is only approximate values. It can be necessary to adjust this data to the individual machining operation.

© a

gen

cyte

am ·

AR

NO

-120

49-U

SA

aRNO®-Werkzeuge

Tools and inserts for parting and grooving

Tooling and indexable inserts for turning and threading

Milling cutters and indexable inserts for milling and thread milling

drilling tools and indexable inserts for drilling

Frä

se

n u

nd

Ge

win

de

fräse

n

ww

w.a

rno

.de

Frä

sen

un

d G

ew

indefrä

sen

/ Millin

g a

nd th

read m

illing

/ Fra

isage e

t fileta

ge p

ar fra

isage

IV IV

ww

w.a

rno

.de

Werkzeuge und Wendeschneidplattenzum Fräsen und Gewindefräsen

Milling cutters and indexable inserts

for milling and thread milling

Outils et plaquettes amoviblesde fraisage et filetage par fraisage

© s

imp

lex

.de

...sowie Sonderwerkzeuge und Erstausrüstungen zum Span(n)en für Drehmaschinen und Bearbeitungszentren.Zur weiteren Übersicht fordern Sie bitte unseren Gesamtkatalog an. Wir beraten Sie gerne.

…as well as special tooling and complete package tooling for turning lathes and machining centers.For further information please ask for our complete catalogue. Please contact us.

…ainsi que des outils spéciaux et premières rotations d’outlis pour tours et centres d’usinage.Nous vous ferons parvenir, à votre demande, un catalogue complet. N’hésitez pas à nous demander conseil.

®

Karl-Heinz Arnold GmbH

Karlsbader Str. 4 . D - 73760 Ostfildern

� + 49 ( 0 ) 711 / 34 802 - 0

� + 49 ( 0 ) 711 / 34 802 - 130

[email protected]

www.arno.de

ARNO (UK) Limited | Unit 3, Sugnall Business Centre | Sugnall, Eccleshall . Staffordshire . ST21 6NF� + 44 01785 850 072 . � + 44 01785 850 076 | [email protected] . www.arno-tools.co.uk

ARNO Italia S.r.l | Via Fiume 13 . 20059 Vimercate (MB)� + 39 039/68 52 101 . � + 39 039/60 83 724 | [email protected] . www.arno-italia.it

ARNO Swiss S.A. | Schanzstraße 1 . CH-8330 Pfäffikon ZH� + 41 449 50 19 88 . � + 41 449 50 19 90 | [email protected] . www.arno-swiss.ch

ARNO - Rouse USA, L.L.C. | 1101 W. Diggins St. . US-60033 Harvard, Illinois� + 1-815-943-4426 . � + 1-815-943-7156 | [email protected] . www.arno-rouse.com

ARNO RU Ltd. | B.Nizhegorodskaya Str.81 . Office 809 . RU-600000 Vladimir�/� + 7(4922) 49-04-20 . сот + 7(920) 928-80-81 | [email protected] . www.arnoru.ru

Werkzeuge und Wendeschneidplattenzum Drehen und Gewindedrehen

Tooling and indexable inserts

for turning and threading

Outils et plaquettes amovibles de tournage et filetage

:

Werkzeuge und Wendeschneidplattenzum Bohren

Drilling tools and indexable inserts

for drilling

Outils et plaquettes de perçage

:

Werkzeugaufnahmen

Work holding tools

Attachements

:





:

Hochdruck -Maschinenschraubstock

High-pressure machine jaw vice

Étau de machine à haute pression

:

Werkzeuge und Schneideinsätzezum Ein- und Abstechen

Tools and inserts

for parting and grooving

Outils et plaquettesde tronçonnage et rainurage

:

Über unsere gebührenfreie Bestell-Hotline: 0800 / 276 69 59 sind wir Mo.–Do. von 700 –1800 Uhr und Fr. von 700 –1600 Uhr für Sie erreichbar.

ww

w.a

rno

.de

Frä

se

n u

nd

Ge

win

de

frä

se

n

Fraesen_Umschlag_2-2011:KAT_U_Fraesen 10 mm 28.02.2011 18:27 Uhr Seite 1

WERKZEUGE

®ARNO

Dre

he

n u

nd

Ge

win

de

dre

he

n

ww

w.a

rno

.de

Dre

hen

un

d G

ew

indedre

hen

/ Turn

ing a

nd th

readin

g/ T

ourn

age e

t fileta

ge

ww

w.a

rno

.de

ww

w.a

rno

.de

Dre

he

n u

nd

Ge

win

de

dre

he

n


Tools and indexable inserts


Outils et plaquettes amoviblesde tournage et filetage

I I I c I I I c

© s

imp

lex

.de


…as well as special tooling and complete package tooling for turning lathes and machinig centers.For further information please ask for our complete catalogue. Please contact us.


®



Fon + 49 ( 0 ) 711 / 34 802 - 0

Fax + 49 ( 0 ) 711 / 34 802 - 130

[email protected]

www.arno.de


ARNO Italia S.r.l | Via Fiume 13 . 20059 Vimercate (Mi)� + 39 039/68 52 101 . � + 39 039/60 83 724 | [email protected] . www.arno-italia.it

ARNO Swiss S.A. | Schanzstraße 1 . CH-8330 Pfäffikon ZH� + 41 449 50 19 88 . � + 41 449 19 90 | [email protected] . www.arno-swiss.ch


ARNO RU Ltd. | B.Nizhegorodskaya Str.81 . Office 809 . RUS-600000 Vladimir�/� + 7(4922) 49-04-20 . сот + 7(920) 928-80-81 | [email protected] . www.arnoru.ru




Outils et plaquettes amovibles de tournage et filetage

:



for drilling

Outils et plaquettes de perçage

:

Werkzeugaufnahmen

Work holding tools

Attachements

:





:



Étau de machine à haute pression

:


Tools and inserts



:


U_Drehen 20,5 mm_16-8:U_Drehen 20,5 16.08.2009 16:50 Uhr Seite 1

WERKZEUGE

®ARNO

Ein-undAbstechen

www.arno.de


Tools and inserts



V Ib


…as well as special tooling and complete package tooling for turning lathes and machining centers.For further information please ask for our complete catalogue. Please contact us.


®



� + 49 ( 0 ) 711 / 34 802 - 0

� + 49 ( 0 ) 711 / 34 802 - 130

[email protected]

www.arno.de


ARNO Italia S.r.l | Via Fiume 13 . 20059 Vimercate (MB)� + 39 039/68 52 101 . � + 39 039/60 83 724 | [email protected] . www.arno-italia.it

ARNO Swiss S.A. | Schanzstraße 1 . CH-8330 Pfäffikon ZH� + 41 449 50 19 88 . � + 41 449 50 19 90 | [email protected] . www.arno-swiss.ch


ARNO RU Ltd. | B.Nizhegorodskaya Str.81 . Office 809 . RU-600000 Vladimir�/� + 7(4922) 49-04-20 . сот + 7(920) 928-80-81 | [email protected] . www.arnoru.ru


WERKZEUGE

®ARNO

Bo

hre

n

ww

w.a

rno

.de


Tools and inserts for drilling

Utensili ed inserti di foratura

Bo

hre

n/ D

rilling

/ Fora

tura

Bo

hre

n

Vb

2-20

11 ©

sim

ple

x.d

e

Vb

ww

w.a

rno

.de




Utensili ed inserti di torniturae filettatura

:



for drilling

Utensili ed inserti di Foratura

:

Werkzeugaufnahmen

Work holding tools

Portautensili e mandrini

:




Utensili ed inserti di fresaturae di filettatura di fresatura.

:



Sistemi di serraggio

:


Tools and inserts


Utensili ed inserti di troncaturae scanalatura

:

ww

w.a

rno

.de

Umschlag Bohren-Vb_8-2:Bohren_2-2011 09.02.2011 12:34 Uhr Seite u1

For further information please ask for our complete catalogue. Please contact us.

aRNO-Werkzeuge USa llC 1101 W. Diggins St. US-60033 Harvard, Illinois Phone: +1 815 943 4426 Fax: +1 815 943 7156 [email protected] www.arnousa.com

karl heinz arnold Gmbh | Karlsbader Str 4 | D-73760 Ostfildern( +49 (0)711 34 802 0 | 7 +49 (0)711 34 802 130 | [email protected] | www.arno.de

aRNO (Uk) limited | Unit 3, Sugnall Business Centre | Sugnall, Eccleshall | Staffordshire | ST21 6NF ( +44 01785 850 072 | 7 +44 01785 850 076 | [email protected] | www.arno-tools.co.uk

aRNO Italia S.r.l | Via J. F. Kennedy 19 | 20871 Vimercate (MB) ( +39 039 68 52 101 | 7 +39 039 60 83 724 | [email protected] | www.arno-italia.it

aRNO RU ltd. | Krassnaja Ul. 38 | RU-600015 Vladimir ( / 7 +7 4922 541125 | COT +7 4922 541135 | [email protected] | www.arnoru.ru

Documents

NEW GEOMETRIES - ARNO USANew Geometries 12 ARNO®-Werkzeuge | New Geometries Inserts ak2110 Grade for roughing of cast iron and nodular cast iron. AK2110 has excellent wear resistance