22
Nexans Heatshrink products

Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

Embed Size (px)

Citation preview

Page 1: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

Nexans Heatshrink products

Page 2: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements
Page 3: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

1

NEXANSPOWER ACCESSORIES

While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. Nexans Power Accessories Ltd. reserves the right to alter or modify the characteristics of its products described in this

catalogue as standards and technology evolve.

Nexans Power AccessoriesNexans is the leading European specialised designer, manufacturer and distributor of prefabricated cable acces-sories for medium voltage energy distribution. It provides a complete range of acces-sories for underground cables: pre-moulded EPDM or silicone rubber connectors, terminationsand joints for cables and epoxy bushings for transformers and switch gear, as well as a large range of cold & heat shrinkable terminations and joints from 12 to 42 kV.Nexans is also the manufactur-er of electrical components for the high voltage accessories.

ISO 9001 CertificateSince 1992, Nexans’ commitment to quality is demonstrated by its ISO 9001 certification.

Laboratory accreditationSince June 2000, Nexans’ independent ELAB laboratory obtained the BELTEST accredi-tation no.192-T-ISO 17025 conform with the European standards for laboratories ISO 17025 for electrical testing of medium voltage cable acces-sories according to the Inter-national standards IEC 61442 and HD 629.

International standardsAll our products meet the International standards like CENELEC HD 629.1, CENELEC EN 50180, IEC 137, IEEE 386 & 404… or country specifica-tions. Official certificates, CESI, KEMA, ATEX… prove the con-formity of our products. Long duration tests of existing or new products are continuously performed in our test fields.

Page 4: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

2

Page 5: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

3

HEAT-SHRINKABLEMEDIUM VOLTAGE

ACCESSORIES

Table of contents 17TTGI117TTGI317GTS117GTS317GTM317GTM3.1

Page 6: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

4

04/2

014

17TTGI1 HEAT-SHRINKABLESINGLE CORE XLPE

INDOOR TERMINATION

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Up to 17.5 kVApplicationHeat-shrinkable terminations for polymeric cables, are widely used by power utilities and in industrial applications.For use indoor in controlled environmental conditions.

Design1. Cable lug. 2. Water sealing mastic.3. Anti-tracking heat-shrinkable

tube.4. Stress control heat-shrinkable

tube. 5. Stress control mastic.6. Earthing lug.

Specifications and standardsMeets the requirements of CENELEC HD 629.1 andIEC 60502-4.

L

3

1

2

2

7

4

5

6

3

1

2

2

6

4

5

L

Terminationtype

VoltageUm(kV)

Length“L”

(mm)

Conductor sizes(mm2)

min max

17TTGI1 12 & 17.5 480 16 240

Page 7: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

5

Ordering instructionsSelect the part number corresponding to both system voltage and conductor size.

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max

17TTGI1.50SC17TTGI1.95SC17TTGI1.240SC

XLPE 3x1x16-25XLPE 3x1x35-95XLPE 3x1x95-240

870000328700003387000031

6/10 & 6.35/11 & 8.7/156/10 & 6.35/11 & 8.7/156/10 & 6.35/11 & 8.7/15

163595

2595240

151520

242832

+ +

1x Black stress control mastic “MACD38”

1x Black stress control tube “GT1”

1x Red anti-tracking tube

“GT2”

1x Earthing lug for screen wires“1070/1x12MS”

3x Cable lug“C”

4x Red sealing mastic

“MBA25”

Kit contentsThe complete TTGI1 termination kit comprises the following components:

The kit also comprises installation instructions (IM1048sc)

=+ + XXTTGI1termination kit

+

Page 8: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

6

04/2

014

17TTGI3HEAT-SHRINKABLE THREE CORE XLPE

INDOOR TERMINATION

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Up to 17.5 kVApplicationHeat-shrinkable terminations for three core polymeric cables, are widely used by power utilities and in industrial applications.An earthing kit for both copper wires and copper tape screen, is included in the kit.For use indoor in controlled environmental conditions.

Terminationtype

VoltageUm(kV)

Conductor sizes(mm2)

min max

17TTGI3 12 & 17.5 150 240

Design1. Cable lug (supplied on

request). 2. Water sealing mastic.3. Anti-tracking heat-shrinkable

tube.4. Stress control heat-shrinkable

tube. 5. Stress control mastic.6. Break-out.7. Earthing lug.

Specifications and standardsMeets the requirements of CENELEC HD 629.1 andIEC 60502-4.

6

7

3

1

4

5

2

2

Page 9: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

7

3x Black stress

control mastic

“MACD38”

3x Black stress

control tube

“GT1-40”

3x Red anti-tracking

tube“GT2-40”

8x Red sealing mastic

“MBA25”

Kit contentsThe complete TTGI3 termination kit comprises the following components:

Ordering instructionsSelect the part number corresponding to both system voltage and conductor size.

The kit also comprises installation instructions, adhesive tape, tinned copper wire and an earthing lug for copper screen wires.

=+ +XXTTGI3

termination kit

++

1x Break-out“36TTE33”

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max17TTGI3.240SC XLPE 3x150-240 87000030 6/10 & 6.35/11 & 8.7/15 150 240 20 32

3x Cable lug“C70.240”

+

Page 10: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

8

04/2

014

Design1. Dual wall tube.2. Stress control tube.3. Stress control mastic.4. Overall protection tube.5. Sealing mastic.6. Screen continuity (copper

mesh).7. Conductor connector.8. Ferrule for screen wires.

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Specifications and standardsMeets the requirements of CENELEC HD 629.2 andIEC 60502-4.

Up to 17.5 kV

17GTS1HEAT-SHRINKABLE

SINGLE CORE XLPESTRAIGHT JOINT

ApplicationFor jointing polymeric cable to be laid in air or directly buried. The product is fully screened and fully submersible.

Straight Jointtype

VoltageUm(kV)

Length“L”

(mm)

Conductor sizes(mm2)

min max

17GTS1 12 & 17.5 600 - 750 70 240

5

2

8

6

3

1

4

L 7

Page 11: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

9

Kit contentsThe complete GTS1 joint kit comprises the following components:

Ordering instructionsSelect the part number corresponding to both system voltage and conductor size.

The kit also comprises installation instructions, adhesive tape, tinned copper wire and a ferrule for the screen wire connection.

+

2x Sealing mastic

“NGAF38”

1x Black stress control tube

“GT1”

4x Stress control mastic

“MNAC30”

=+ XXGTS1straightjoint kit

++

1x Overall

protectiontube

“GT4”

1x Roll of tinned copper

meshtape

“CACU-60X2”

+ +

1x Dualwalltube

“GT25-80”

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max17GTS1.240SC XLPE 1x70-240 87000035 6/10 & 6.35/11 & 8.7/15 70 240 20 32

1x Mechanical conductor connector

“M70-240”

Page 12: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

10

04/2

014

17GTS3HEAT-SHRINKABLE THREE CORE XLPE

STRAIGHT JOINT

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Specifications and standardsMeets the requirements of CENELEC HD 629.2 andIEC 60502-4.

Up to 17.5 kVApplicationFor jointing three core polymeric cable to be directly buried. The product is fully screened and fully submersible.

Straight Jointtype

VoltageUm(kV)

Length“L”

(mm)

Conductor sizes(mm2)

min max17GTS3 12 & 17.5 1200 - 1600 25 240

Design1. Dual wall tube.2. Stress control tube.3. Screen continuity (copper

mesh).4. Stress control mastic.5. Overall protection tube.6. Sealing mastic.7. Conductor connector.

5

6

6

3

1

2

4

L

7

Page 13: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

11

Ordering instructionsSelect the part number corresponding to both system voltage and cable dimensions.

Kit contentsThe complete GTS3 joint kit comprises the following components:

The kit also comprises installation instructions, tinned copper wire, adhesive tape, tinned copper mesh tape and a ferrule for the screen wire connection.

+

2x Sealing mastic

“NGAF38”

1x Black stress control tube “GT1-40J”

4x Stress control mastic

“MNAC30”

=+ + XXGTS3straightjoint kit

+

1x Dual walltube

“GT25-60”

2x Overallprotection

tube“GT3”

+

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max

17GTS3.95SC17GTS3.240SC

XLPE 3x25 - 3x95XLPE 3x95 - 3x240

8700001987000020

6/10 & 6.35/11 & 8.7/156/10 & 6.35/11 & 8.7/15

2595

95240

1520

2932

3x Mechanical conductor connector

“M70-240”

Page 14: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

12

04/2

014

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Up to 17.5 kV

17GTM3HEAT-SHRINKABLE

THREE CORE TRANSITION JOINT

ApplicationFor jointing three-core paper cables (draining and non-draining) to three core polymeric cables. For use with belted or screened (Höchstädter) cables with a common lead sheath. This transition joint is fully screened, submersible and suitable to be directly buried.

Straight Jointtype

VoltageUm(kV)

Length“L”

(mm)

Conductor sizes(mm2)

min max17GTM3 12 - 17.5 1200 - 1400 25 240

Specifications and standardsMeets the requirements of CENELEC HD 629.2 andIEC 60502-4.

Design 1. Dual wall tube. 2. Stress control tube. 3. Screen continuity (copper mesh). 4. Stress control mastic. 5. Overall protection tube. 6. Sealing mastic. 7. Conductor connector. 8. Barrier tube. 9. Semi-conductive break-out. 10. Semi-conductive tubes. 11. Stress control mastic. 12. Semi-conductive tape.

5

11

6

12

9

10

8

2

1

4

3

6

L

7

Page 15: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

13

+

1x Black stress

control tube “GT1”

=+ +

1x Dual walltube

“GT25”

2x Overallprotection

tube“GT8”

Ordering instructionsSelect the part number corresponding to both system voltage and cable dimensions.

Kit contentsThe complete GTM3 joint kit comprises the following components:

The kit also comprises installation instructions, semi-conductive tape, Hi-K mastic (MNAC30 and MACDC), sealing mastic “NGAF”, adhesive tape, tinned copper mesh tape, tinned copper wire and roll springs.

XXGTM3transition joint kit

+ +

3x Barriertube

“GT10”

Semi-conductive break-out“36TTS”

3x Semi-conductive

tube“GT5”

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max

17GTM3.95SC17GTM3.240SC

APB-XLPE 3x25 - 3x95APB-XLPE 3x95 - 3x240

8700002287000021

6/10 & 6.35/11 & 8.7/156/10 & 6.35/11 & 8.7/15

2595

95240

1520

2832

+

3x Mechanical conductor connector

“M70-240”

Page 16: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

14

04/2

014

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV

Specifications and standardsMeets the requirements of CENELEC HD 629.2 andIEC 60502-4.

Up to 17.5 kV

17GTM3.1HEAT-SHRINKABLE

THREE CORE TRANSITION JOINT

ApplicationFor jointing three-core paper cables (draining and non-draining) to three single core polymeric cables. For use with belted or screened (Höchstädter) cables with a common lead sheath. This transition joint is fully screened, submersible and suitable to be directly buried.

Straight Jointtype

VoltageUm(kV)

Length“L”

(mm)

Conductor sizes(mm2)

min max17GTM3.1 12 - 17.5 1800 35 240

Design 1. Dual wall tube. 2. Stress control tube. 3. Protection tube. 4. Hi-K mastic. 5. Sealing mastic. 6. Screen continuity (copper braid and mesh). 7. Conductor connector. 8. Semi-conductive break-out. 9. Semi-conductive tubes. 10. Barrier tube. 11. Break-out.

3

5

6

9

1

2

4

5

11

L

10

8

4

7

3

Page 17: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

15

Ordering instructionsSelect the part number corresponding to both system voltage and cable dimensions.

Kit contentsThe complete GTM3.1 joint kit comprises the following components:

The kit also comprises installation instructions, semi-conductive tape, Hi-K mastic (MNAC30 and MACDC38), stress control mastic, sealing mastic “NGAF”, adhesive tape, copper braid, tinned copper mesh tape, tinned copper wire armour continuity and roll springs.

+

3x Semi-conductive

tube “GT5”

2x Protection tube

“GT3”

=+ XXGTM3.1transitionjoint kit

+

3x Dual walltube

“GT25”

3x Barriertube

“GT10”

+ +

1x Break-out

“1TTI”

3x Black stress control

tube “GT1”

++

1x Semi-conductive break-out“36TTS”

Product nameDescription

cableNexans

nr.

VoltageU0/U(kV)

Conductor size range(mm2)

DOicable(mm)

min max min max

17GTM3.1.150SC

17GTM3.1.240SC

APB 3X35-70 - XLPE3X1X95-150APB 3X95-240 -

XLPE3X1X150-240

87000025

87000023

6/10 & 6.35/11 & 8.7/15

6/10 & 6.35/11 & 8.7/15

35

95

150

240

15

20

28

32

3x Mechanical conductor connector

“M”

Page 18: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

16

04/2

014

NOTES

Page 19: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

17

Page 20: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

18

Page 21: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements
Page 22: Nexans Heatshrink products Denmark v3.pdf · Stress control heat-shrinkable tube. 5. Stress control mastic. 6. Break-out. 7. Earthing lug. Specifications and standards Meets the requirements

Nexans Denmark A/S, DK-7130 JuelsmindeTelefon +45 75 69 33 99, Telefax +45 75 69 34 46, http://www.nexans.dk

CVR nr. 66 23 40 10, Bank Nordea Bank Danmark A/S, konto nr. 2213-0500314095, SWIFT NDEADKKK