2
www.bms-inc.com The ODU-890 Fibre Outdoor unit is the complementary part of the IDU-890 Fibre Indoor unit. The ASI signal generated by the ODU is transmitted via a SMPTE Hybrid fiber cable (up to 1000 m) to the indoor unit. Additionally the remote control data are distributed from the internal UHF Data transmitter to the camera adaptor. This Data By using the inbuilt display and keyboard, the frequency of the remote data transmitter and the video link can be it again at the Indoor unit. Lemo 3K.93C** (SMPTE311M) Connector Self powering or local power input > Features > Performance ODU-890 Fiber Outdoor Unit www.ikegami.eu ODU-890 is an OEM product and based on the BMS product DR2450ODU-Fiber with Ikegami infrastructure. stream incorporated a reference-signal genlocking the vertical and horizontal phase of the camera head, granting at stable latency at any moment. directly set from the indoor unit avoiding in this way to set Display & keyboard for parameter setting Mounting bar for two OMNI aerials Optinal folding reflectors for higher gain

ODU 890 page 1 leaflet - ikegami.de The ODU-890 Fibre Outdoor unit is the complementary part of the IDU-890 Fibre Indoor unit. The ASI signal generated by the ODU is transmitted via

  • Upload
    vungoc

  • View
    224

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ODU 890 page 1 leaflet - ikegami.de The ODU-890 Fibre Outdoor unit is the complementary part of the IDU-890 Fibre Indoor unit. The ASI signal generated by the ODU is transmitted via

www.bms-inc.com

The ODU-890 Fibre Outdoor unit is the complementary part of the IDU-890 Fibre Indoor unit. The ASI signal generated by the ODU is transmitted via a SMPTE Hybridber cable (up to 1000 m) to the indoor unit. Additionally the remote control data are distributed from the internalUHF Data transmitter to the camera adaptor. This Data

By using the inbuilt display and keyboard, the frequencyof the remote data transmitter and the video link can be

it again at the Indoor unit.

• Lemo 3K.93C** (SMPTE311M) Connector• Self powering or local power input

> Features

> Performance

ODU-890Fiber Outdoor Unit

www.ikegami.eu

ODU-890 is an OEM product and based on the BMS

product DR2450ODU-Fiber with Ikegami infrastructure.

stream incorporated a reference-signal genlocking thevertical and horizontal phase of the camera head, grantingat stable latency at any moment.

directly set from the indoor unit avoiding in this way to set

• Display & keyboard for parameter setting• Mounting bar for two OMNI aerials• Optinal folding reectors for higher gain

Page 2: ODU 890 page 1 leaflet - ikegami.de The ODU-890 Fibre Outdoor unit is the complementary part of the IDU-890 Fibre Indoor unit. The ASI signal generated by the ODU is transmitted via

Inputs / Outputs

BMS Europe GmbH Geor-Ohm-Str. 2 • 65232 Taunusstein • GermanyTel: +49- 6128 7408226 • Fax: +49-61 28-72 39-29 www.bms-inc.com • [email protected]

Ikegami Electronics Europe GmbH41460 Neuss • Ikegamistr. 1 • GermanyTel:www.ikegami.eu • [email protected]

+49-2131-123-0 • Fax: +49-2131-102820

> Specications

> ODU-890 Fiber Outdoor Unit

> Typical Application

2x RF N(f) RF in 1.3 to 7.4 GHz(subdivided)

50 Ω

UHF N(f) UHF out Camera remote control data (option)

50 Ω

Lemo 3K.93C*SMPTE 311M

Fibre ASI / Data out48VDC / Data in

Technical Characteristics

Frequency 1.3 to 7.4 GHz (subdivided)

Channel Bandwith 6/7/8 MHz (selectable with DR2500IDU-Fibre)

Control Built-in Display and Keyboard for fre-quency settings

Power Input 48VDC remotely

Temperature - 10°C to + 50°C (+14°F to +122°F)

Relative Humidity 5 % to 95 %

Dimensions(W x D x H)

173 x 318 x 113mm 6.81“ x 12.50“ x 4.44“

Weight approx. 4 kg (8.81 lbs)

Dimensions(W x D x H)

172 x 298 x 112 mm(6.77'' x 11.73'' x 4.41“ approx.')