Operating X-07 and X-09 Locks The purpose of this video is to demonstrate operating X-07 and X-09 locks. To unlock, dial left or counterclockwise four to six turns to power the lock. Numbers will appear on the LCD display screen when the lock is powered up. Continue dialing left to the first number of the combination. And stop. The number will be displayed on the screen. Turn the dial right or clockwise until you come to the second number. And stop. The number will be displayed on the screen. Turn the dial left until you come to the third number. Stop. The number will be displayed on the screen. Turn the dial to the right, "OP" will appear. Continue turning until the bolt is retracted and the lock is unlocked. Note, when unlocking. If you pass your target number by 4 or more numbers, continue dialing in the same direction until you reach the target number again. If you pass the target number by no more than three numbers you may reverse directions, slowly, and the display will jump back four numbers. Now you may dial slowly in the original direction to the target number. Also note while unlocking, you can redial the entire combination if the lightning bolt symbol is displayed or if the screen goes blank before the lock bolt is retracted.