Click here to load reader

Panther - Carlisle · PDF file14 Panther ® Synchronous Drive Belt The energy efficient Panther® offers higher torque capacity than the Carlisle® Synchro-Cog® HT and

  • View
    224

  • Download
    0

Embed Size (px)

Text of Panther - Carlisle · PDF file14 Panther ® Synchronous Drive Belt The energy efficient...

  • Sync

    hron

    ous

    Bel

    ts

    www.carlislebelts.com 13

    Optimized tensile member

    Advanced polymer compound

    Maintenance-free

    Energy efficient

    Applications: Conveyors Blowers Packaging equipment Machine tools Industrial machinery & More

    Panther

    Synchronous Drive Belt

    1 Optimized Tensile MemberHigh strengthMinimal tension decay Dimensional stability

    2 Nylon Tooth Facing Graphite-loadedSelf-lubricatingWear resistant

    3 RPP ProfileGreater transfer of powerJump and shear resistant

    4 BackingPrecision-groundSmoother operation with backside idler

    5 Advanced Polymer CompoundIncreased performanceIncreased belt life

    Recommended Sprockets:High Torque Synchronous (HTS) Sprockets MPB, QD, Taper Bushed (8mm, 14mm, 20mm)

    5

    2

    1

    4

    3

  • 14

    Panther

    Synchronous Drive Belt

    www.carlislebelts.com14

    The energy efficient Panther offers higher torque capacity than the Carlisle Synchro-Cog HT and conventional synchronous belts.

    Strong Panther shrugs off shock loads. Designed with Ultra-Cord, a non-aramid fiber tensile member that delivers strength and dimensional stability.

    Resilient Uniquely engineered teeth are made of high performance polychloroprene, an advanced polymer compound which increases both the strength and abrasion resistance of the teeth. The RPP profile offers superior performance in RPP, HTS and PGGT2 sprockets as well as HPPD, Hawk Pd and HTD sprockets.

    Energy Efficient Panther performs at 98-99% operating efficiency for reduced energy consumption.

    Panther Power Panther offers higher power ratings than conventional rubber synchronous belts. Available in 8, 14 and 20mm pitches.

    Hawk Pd is a registered trademark of Veyance Technologies, Inc. PGGT2 and HTD are registered trademarks of Gates Corporation.

    Panther is designed to improve performance and drive life while reducing maintenance and downtime.

  • www.carlislebelts.com 15

    Sync

    hron

    ous

    Bel

    ts

    Panther

    Part Numbers

    Panther

    Synchronous Drive Belt

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    480-8MPT-12 60 480 18.9 0.07

    480-8MPT-20 60 480 18.9 0.12

    480-8MPT-22 60 480 18.9 0.13

    480-8MPT-30 60 480 18.9 0.17

    480-8MPT-35 60 480 18.9 0.20

    480-8MPT-50 60 480 18.9 0.29

    480-8MPT-60 60 480 18.9 0.35

    480-8MPT-85 60 480 18.9 0.49

    560-8MPT-12 70 560 22.0 0.08

    560-8MPT-20 70 560 22.0 0.14

    560-8MPT-22 70 560 22.0 0.15

    560-8MPT-30 70 560 22.0 0.20

    560-8MPT-35 70 560 22.0 0.24

    560-8MPT-50 70 560 22.0 0.34

    560-8MPT-60 70 560 22.0 0.41

    560-8MPT-85 70 560 22.0 0.57

    600-8MPT-12 75 600 23.6 0.09

    600-8MPT-20 75 600 23.6 0.14

    600-8MPT-22 75 600 23.6 0.16

    600-8MPT-30 75 600 23.6 0.22

    600-8MPT-35 75 600 23.6 0.25

    600-8MPT-50 75 600 23.6 0.36

    600-8MPT-60 75 600 23.6 0.43

    600-8MPT-85 75 600 23.6 0.61

    640-8MPT-12 80 640 25.2 0.09

    640-8MPT-20 80 640 25.2 0.15

    640-8MPT-22 80 640 25.2 0.17

    640-8MPT-30 80 640 25.2 0.23

    640-8MPT-35 80 640 25.2 0.27

    640-8MPT-50 80 640 25.2 0.39

    640-8MPT-60 80 640 25.2 0.46

    640-8MPT-85 80 640 25.2 0.66

    720-8MPT-12 90 720 28.3 0.10

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    720-8MPT-20 90 720 28.3 0.17

    720-8MPT-22 90 720 28.3 0.19

    720-8MPT-30 90 720 28.3 0.26

    720-8MPT-35 90 720 28.3 0.30

    720-8MPT-50 90 720 28.3 0.43

    720-8MPT-60 90 720 28.3 0.52

    720-8MPT-85 90 720 28.3 0.74

    800-8MPT-12 100 800 31.5 0.12

    800-8MPT-20 100 800 31.5 0.19

    800-8MPT-22 100 800 31.5 0.21

    800-8MPT-30 100 800 31.5 0.29

    800-8MPT-35 100 800 31.5 0.34

    800-8MPT-50 100 800 31.5 0.48

    800-8MPT-60 100 800 31.5 0.58

    800-8MPT-85 100 800 31.5 0.82

    880-8MPT-12 110 880 34.6 0.13

    880-8MPT-20 110 880 34.6 0.21

    880-8MPT-22 110 880 34.6 0.23

    880-8MPT-30 110 880 34.6 0.32

    880-8MPT-35 110 880 34.6 0.37

    880-8MPT-50 110 880 34.6 0.53

    880-8MPT-60 110 880 34.6 0.64

    880-8MPT-85 110 880 34.6 0.90

    896-8MPT-12 112 896 35.3 0.13

    896-8MPT-20 112 896 35.3 0.22

    896-8MPT-22 112 896 35.3 0.24

    896-8MPT-30 112 896 35.3 0.32

    896-8MPT-35 112 896 35.3 0.38

    896-8MPT-50 112 896 35.3 0.54

    896-8MPT-60 112 896 35.3 0.65

    896-8MPT-85 112 896 35.3 0.92

    920-8MPT-12 115 920 36.2 0.13

    920-8MPT-20 115 920 36.2 0.22

    Part Number Example: 1400-8MPT-50 = 1400 8M PT 50 | | | | Pitch Length Tooth Panther Construction Width (millimeters) Pitch (RPP tooth profile) (millimeters)

  • www.carlislebelts.com16

    Panther

    Part Numbers

    PantherSynchronous Drive Belt

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    920-8MPT-22 115 920 36.2 0.24

    920-8MPT-30 115 920 36.2 0.33

    920-8MPT-35 115 920 36.2 0.39

    920-8MPT-50 115 920 36.2 0.55

    920-8MPT-60 115 920 36.2 0.67

    920-8MPT-85 115 920 36.2 0.94

    960-8MPT-12 120 960 37.8 0.14

    960-8MPT-20 120 960 37.8 0.23

    960-8MPT-22 120 960 37.8 0.25

    960-8MPT-30 120 960 37.8 0.35

    960-8MPT-35 120 960 37.8 0.41

    960-8MPT-50 120 960 37.8 0.58

    960-8MPT-60 120 960 37.8 0.69

    960-8MPT-85 120 960 37.8 0.98

    1000-8MPT-12 125 1000 39.4 0.14

    1000-8MPT-20 125 1000 39.4 0.24

    1000-8MPT-22 125 1000 39.4 0.27

    1000-8MPT-30 125 1000 39.4 0.36

    1000-8MPT-35 125 1000 39.4 0.42

    1000-8MPT-50 125 1000 39.4 0.60

    1000-8MPT-60 125 1000 39.4 0.72

    1000-8MPT-85 125 1000 39.4 1.02

    1040-8MPT-12 130 1040 40.9 0.15

    1040-8MPT-20 130 1040 40.9 0.25

    1040-8MPT-22 130 1040 40.9 0.28

    1040-8MPT-30 130 1040 40.9 0.38

    1040-8MPT-35 130 1040 40.9 0.44

    1040-8MPT-50 130 1040 40.9 0.63

    1040-8MPT-60 130 1040 40.9 0.75

    1040-8MPT-85 130 1040 40.9 1.07

    1120-8MPT-12 140 1120 44.1 0.16

    1120-8MPT-20 140 1120 44.1 0.27

    1120-8MPT-22 140 1120 44.1 0.30

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    1120-8MPT-30 140 1120 44.1 0.41

    1120-8MPT-35 140 1120 44.1 0.47

    1120-8MPT-50 140 1120 44.1 0.68

    1120-8MPT-60 140 1120 44.1 0.81

    1120-8MPT-85 140 1120 44.1 1.15

    1152-8MPT-12 144 1152 45.4 0.17

    1152-8MPT-20 144 1152 45.4 0.28

    1152-8MPT-22 144 1152 45.4 0.31

    1152-8MPT-30 144 1152 45.4 0.42

    1152-8MPT-35 144 1152 45.4 0.49

    1152-8MPT-50 144 1152 45.4 0.69

    1152-8MPT-60 144 1152 45.4 0.83

    1152-8MPT-85 144 1152 45.4 1.18

    1200-8MPT-12 150 1200 47.2 0.17

    1200-8MPT-20 150 1200 47.2 0.29

    1200-8MPT-22 150 1200 47.2 0.32

    1200-8MPT-30 150 1200 47.2 0.43

    1200-8MPT-35 150 1200 47.2 0.51

    1200-8MPT-50 150 1200 47.2 0.72

    1200-8MPT-60 150 1200 47.2 0.87

    1200-8MPT-85 150 1200 47.2 1.23

    1224-8MPT-12 153 1224 48.2 0.18

    1224-8MPT-20 153 1224 48.2 0.30

    1224-8MPT-22 153 1224 48.2 0.32

    1224-8MPT-30 153 1224 48.2 0.44

    1224-8MPT-35 153 1224 48.2 0.52

    1224-8MPT-50 153 1224 48.2 0.74

    1224-8MPT-60 153 1224 48.2 0.89

    1224-8MPT-85 153 1224 48.2 1.25

    1248-8MPT-12 156 1248 49.1 0.18

    1248-8MPT-20 156 1248 49.1 0.30

    1248-8MPT-22 156 1248 49.1 0.33

    1248-8MPT-30 156 1248 49.1 0.45

  • www.carlislebelts.com 17

    Sync

    hron

    ous

    Bel

    ts

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    1248-8MPT-35 156 1248 49.1 0.53

    1248-8MPT-50 156 1248 49.1 0.75

    1248-8MPT-60 156 1248 49.1 0.90

    1248-8MPT-85 156 1248 49.1 1.28

    1280-8MPT-12 160 1280 50.4 0.19

    1280-8MPT-20 160 1280 50.4 0.31

    1280-8MPT-22 160 1280 50.4 0.34

    1280-8MPT-30 160 1280 50.4 0.46

    1280-8MPT-35 160 1280 50.4 0.54

    1280-8MPT-50 160 1280 50.4 0.77

    1280-8MPT-60 160 1280 50.4 0.93

    1280-8MPT-85 160 1280 50.4 1.31

    1360-8MPT-12 170 1360 53.5 0.20

    1360-8MPT-20 170 1360 53.5 0.33

    1360-8MPT-22 170 1360 53.5 0.36

    1360-8MPT-30 170 1360 53.5 0.49

    1360-8MPT-35 170 1360 53.5 0.57

    1360-8MPT-50 170 1360 53.5 0.82

    1360-8MPT-60 170 1360 53.5 0.98

    1360-8MPT-85 170 1360 53.5 1.39

    1400-8MPT-12 175 1400 55.1 0.20

    1400-8MPT-20 175 1400 55.1 0.34

    1400-8MPT-22 175 1400 55.1 0.37

    1400-8MPT-30 175 1400 55.1 0.51

    1400-8MPT-35 175 1400 55.1 0.59

    1400-8MPT-50 175 1400 55.1 0.84

    1400-8MPT-60 175 1400 55.1 1.01

    1400-8MPT-85 175 1400 55.1 1.43

    1440-8MPT-12 180 1440 56.7 0.21

    1440-8MPT-20 180 1440 56.7 0.35

    1440-8MPT-22 180 1440 56.7 0.38

    1440-8MPT-30 180 1440 56.7 0.52

    1440-8MPT-35 180 1440 56.7 0.61

    PartNumber

    NumberOf Teeth

    Pitch Length Weight(lbs)

    (mm) (in)

    8M Pitch High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    1440-8MPT-50 180 1440 56.7 0.87

    1440-8MPT-60 180 1440 56.7 1.04

    1440-8MPT-85 180 1440 56.7 1.48

    1600-8MPT-12 200 1600 63.0 0.23

    1600-8MPT-20 200 1600 63.0 0.39

    1600-8MPT-22