Click here to load reader

Panther - Carlisle Belts · PDF file Panther ® Synchronous Drive Belt The energy efficient Panther® offers higher torque capacity than the Carlisle® Synchro-Cog® HT and conventional

  • View
    0

  • Download
    0

Embed Size (px)

Text of Panther - Carlisle Belts · PDF file Panther ® Synchronous Drive Belt The energy efficient...

  • Sy nc

    hr on

    ou s

    B el

    ts

    www.carlislebelts.com 13

    Optimized tensile member

    Advanced polymer compound

    Maintenance-free

    Energy efficient

    Applications: Conveyors Blowers Packaging equipment Machine tools Industrial machinery & More

    Panther®

    Synchronous Drive Belt

    1 Optimized Tensile Member High strength Minimal tension decay Dimensional stability

    2 Nylon Tooth Facing Graphite-loaded Self-lubricating Wear resistant

    3 RPP® Profile Greater transfer of power Jump and shear resistant

    4 Backing Precision-ground Smoother operation with backside idler

    5 Advanced Polymer Compound Increased performance Increased belt life

    Recommended Sprockets: High Torque Synchronous (HTS) Sprockets – MPB, QD, Taper Bushed (8mm, 14mm, 20mm)

    5

    2

    1

    4

    3

  • 14

    Panther®

    Synchronous Drive Belt

    www.carlislebelts.com14

    The energy efficient Panther® offers higher torque capacity than the Carlisle® Synchro-Cog® HT and conventional synchronous belts.

    ■■ Strong – Panther shrugs off shock loads. Designed with Ultra-Cord, a non-aramid fiber tensile member that delivers strength and dimensional stability.

    ■■ Resilient – Uniquely engineered teeth are made of high performance polychloroprene, an advanced polymer compound which increases both the strength and abrasion resistance of the teeth. The RPP® profile offers superior performance in RPP, HTS and PGGT2® sprockets as well as HPPD, Hawk Pd® and HTD® sprockets.

    ■■ Energy Efficient – Panther performs at 98-99% operating efficiency for reduced energy consumption.

    ■■ Panther Power – Panther offers higher power ratings than conventional rubber synchronous belts. Available in 8, 14 and 20mm pitches.

    Hawk Pd® is a registered trademark of Veyance Technologies, Inc. PGGT2® and HTD® are registered trademarks of Gates Corporation.

    Panther® is designed to improve performance and drive life while reducing maintenance and downtime.

  • www.carlislebelts.com 15

    Sy nc

    hr on

    ou s

    B el

    ts

    Panther®

    Part Numbers

    Panther ®

    Synchronous Drive Belt

    Part Number

    Number Of Teeth

    Pitch Length Weight (lbs)

    (mm) (in)

    8M Pitch – High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    480-8MPT-12 60 480 18.9 0.07

    480-8MPT-20 60 480 18.9 0.12

    480-8MPT-22 60 480 18.9 0.13

    480-8MPT-30 60 480 18.9 0.17

    480-8MPT-35 60 480 18.9 0.20

    480-8MPT-50 60 480 18.9 0.29

    480-8MPT-60 60 480 18.9 0.35

    480-8MPT-85 60 480 18.9 0.49

    560-8MPT-12 70 560 22.0 0.08

    560-8MPT-20 70 560 22.0 0.14

    560-8MPT-22 70 560 22.0 0.15

    560-8MPT-30 70 560 22.0 0.20

    560-8MPT-35 70 560 22.0 0.24

    560-8MPT-50 70 560 22.0 0.34

    560-8MPT-60 70 560 22.0 0.41

    560-8MPT-85 70 560 22.0 0.57

    600-8MPT-12 75 600 23.6 0.09

    600-8MPT-20 75 600 23.6 0.14

    600-8MPT-22 75 600 23.6 0.16

    600-8MPT-30 75 600 23.6 0.22

    600-8MPT-35 75 600 23.6 0.25

    600-8MPT-50 75 600 23.6 0.36

    600-8MPT-60 75 600 23.6 0.43

    600-8MPT-85 75 600 23.6 0.61

    640-8MPT-12 80 640 25.2 0.09

    640-8MPT-20 80 640 25.2 0.15

    640-8MPT-22 80 640 25.2 0.17

    640-8MPT-30 80 640 25.2 0.23

    640-8MPT-35 80 640 25.2 0.27

    640-8MPT-50 80 640 25.2 0.39

    640-8MPT-60 80 640 25.2 0.46

    640-8MPT-85 80 640 25.2 0.66

    720-8MPT-12 90 720 28.3 0.10

    Part Number

    Number Of Teeth

    Pitch Length Weight (lbs)

    (mm) (in)

    8M Pitch – High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    720-8MPT-20 90 720 28.3 0.17

    720-8MPT-22 90 720 28.3 0.19

    720-8MPT-30 90 720 28.3 0.26

    720-8MPT-35 90 720 28.3 0.30

    720-8MPT-50 90 720 28.3 0.43

    720-8MPT-60 90 720 28.3 0.52

    720-8MPT-85 90 720 28.3 0.74

    800-8MPT-12 100 800 31.5 0.12

    800-8MPT-20 100 800 31.5 0.19

    800-8MPT-22 100 800 31.5 0.21

    800-8MPT-30 100 800 31.5 0.29

    800-8MPT-35 100 800 31.5 0.34

    800-8MPT-50 100 800 31.5 0.48

    800-8MPT-60 100 800 31.5 0.58

    800-8MPT-85 100 800 31.5 0.82

    880-8MPT-12 110 880 34.6 0.13

    880-8MPT-20 110 880 34.6 0.21

    880-8MPT-22 110 880 34.6 0.23

    880-8MPT-30 110 880 34.6 0.32

    880-8MPT-35 110 880 34.6 0.37

    880-8MPT-50 110 880 34.6 0.53

    880-8MPT-60 110 880 34.6 0.64

    880-8MPT-85 110 880 34.6 0.90

    896-8MPT-12 112 896 35.3 0.13

    896-8MPT-20 112 896 35.3 0.22

    896-8MPT-22 112 896 35.3 0.24

    896-8MPT-30 112 896 35.3 0.32

    896-8MPT-35 112 896 35.3 0.38

    896-8MPT-50 112 896 35.3 0.54

    896-8MPT-60 112 896 35.3 0.65

    896-8MPT-85 112 896 35.3 0.92

    920-8MPT-12 115 920 36.2 0.13

    920-8MPT-20 115 920 36.2 0.22

    Part Number Example: 1400-8MPT-50 = 1400 – 8M PT – 50 | | | | Pitch Length Tooth Panther Construction Width (millimeters) Pitch (RPP tooth profile) (millimeters)

  • www.carlislebelts.com16

    Panther®

    Part Numbers

    Panther® Synchronous Drive Belt

    Part Number

    Number Of Teeth

    Pitch Length Weight (lbs)

    (mm) (in)

    8M Pitch – High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    920-8MPT-22 115 920 36.2 0.24

    920-8MPT-30 115 920 36.2 0.33

    920-8MPT-35 115 920 36.2 0.39

    920-8MPT-50 115 920 36.2 0.55

    920-8MPT-60 115 920 36.2 0.67

    920-8MPT-85 115 920 36.2 0.94

    960-8MPT-12 120 960 37.8 0.14

    960-8MPT-20 120 960 37.8 0.23

    960-8MPT-22 120 960 37.8 0.25

    960-8MPT-30 120 960 37.8 0.35

    960-8MPT-35 120 960 37.8 0.41

    960-8MPT-50 120 960 37.8 0.58

    960-8MPT-60 120 960 37.8 0.69

    960-8MPT-85 120 960 37.8 0.98

    1000-8MPT-12 125 1000 39.4 0.14

    1000-8MPT-20 125 1000 39.4 0.24

    1000-8MPT-22 125 1000 39.4 0.27

    1000-8MPT-30 125 1000 39.4 0.36

    1000-8MPT-35 125 1000 39.4 0.42

    1000-8MPT-50 125 1000 39.4 0.60

    1000-8MPT-60 125 1000 39.4 0.72

    1000-8MPT-85 125 1000 39.4 1.02

    1040-8MPT-12 130 1040 40.9 0.15

    1040-8MPT-20 130 1040 40.9 0.25

    1040-8MPT-22 130 1040 40.9 0.28

    1040-8MPT-30 130 1040 40.9 0.38

    1040-8MPT-35 130 1040 40.9 0.44

    1040-8MPT-50 130 1040 40.9 0.63

    1040-8MPT-60 130 1040 40.9 0.75

    1040-8MPT-85 130 1040 40.9 1.07

    1120-8MPT-12 140 1120 44.1 0.16

    1120-8MPT-20 140 1120 44.1 0.27

    1120-8MPT-22 140 1120 44.1 0.30

    Part Number

    Number Of Teeth

    Pitch Length Weight (lbs)

    (mm) (in)

    8M Pitch – High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    1120-8MPT-30 140 1120 44.1 0.41

    1120-8MPT-35 140 1120 44.1 0.47

    1120-8MPT-50 140 1120 44.1 0.68

    1120-8MPT-60 140 1120 44.1 0.81

    1120-8MPT-85 140 1120 44.1 1.15

    1152-8MPT-12 144 1152 45.4 0.17

    1152-8MPT-20 144 1152 45.4 0.28

    1152-8MPT-22 144 1152 45.4 0.31

    1152-8MPT-30 144 1152 45.4 0.42

    1152-8MPT-35 144 1152 45.4 0.49

    1152-8MPT-50 144 1152 45.4 0.69

    1152-8MPT-60 144 1152 45.4 0.83

    1152-8MPT-85 144 1152 45.4 1.18

    1200-8MPT-12 150 1200 47.2 0.17

    1200-8MPT-20 150 1200 47.2 0.29

    1200-8MPT-22 150 1200 47.2 0.32

    1200-8MPT-30 150 1200 47.2 0.43

    1200-8MPT-35 150 1200 47.2 0.51

    1200-8MPT-50 150 1200 47.2 0.72

    1200-8MPT-60 150 1200 47.2 0.87

    1200-8MPT-85 150 1200 47.2 1.23

    1224-8MPT-12 153 1224 48.2 0.18

    1224-8MPT-20 153 1224 48.2 0.30

    1224-8MPT-22 153 1224 48.2 0.32

    1224-8MPT-30 153 1224 48.2 0.44

    1224-8MPT-35 153 1224 48.2 0.52

    1224-8MPT-50 153 1224 48.2 0.74

    1224-8MPT-60 153 1224 48.2 0.89

    1224-8MPT-85 153 1224 48.2 1.25

    1248-8MPT-12 156 1248 49.1 0.18

    1248-8MPT-20 156 1248 49.1 0.30

    1248-8MPT-22 156 1248 49.1 0.33

    1248-8MPT-30 156 1248 49.1 0.45

  • www.carlislebelts.com 17

    Sy nc

    hr on

    ou s

    B el

    ts

    Part Number

    Number Of Teeth

    Pitch Length Weight (lbs)

    (mm) (in)

    8M Pitch – High Torque Synchronous (HTS) Sprockets: MPB, QD, Taper Bushed (8mm)

    1248-8MPT-35 156 1248 49.1 0.53

    1248-8MPT-50 156 1248 49.1 0.75

    1248-8MPT-60 156 1248 49.1 0.90

    1248-8MPT-85 156 1248 49.1 1.28

    1280-8MPT-12 160 1280 50.4 0.19

    1280-8MPT-20 160 1280 50.4 0.31

    1280-8MPT-22 160 1280 50.4 0.34

    1280-8MPT-30 160 1280 50.4 0.46

    1280-8MPT-35 160 1280 50.4 0.54

    1280-8MPT-50 160 1280 50.4 0.77

    1280-8MPT-60 160 1280 50.4 0.93

    1280-8MPT-85 160 1280 50.4 1.31

    1360-8MPT-12 170 1360 53.5 0.20

    1360-8MPT-20 170 1360 53.5 0.33

    1360-8MPT-22 170 1360 53.5 0.36

    1360-8MPT-30 170 1360 53.5 0.49

    1360-8MPT-35 170 1360 53.5 0.57

    1360-8MPT-50 170 1360 53.5 0.82

    1360-8MPT-60 170 1360 53.5 0.98

    1360-8MPT-85 170 1360 53.5 1.39

    1400-8MPT-12 175 1400 55.1 0.20

    1400-8MPT-20 175 1400 55.1 0.34

    1400-8MPT-22 175 1400 55.1 0.37

    1400-8MPT-30 175 1400 55.1 0.51

    1400-8MPT-35 175 1400 55.1 0.59

Search related