Parflex/Atlantic Fluoropolymer Tubing Productsparkerstorethailand.com/PDF/PFA_PTFE/4150_A00.pdf · Parker Hannifin Corporation Parflex/Atlantic Chestnut Ridge, NY 6 Heavy Wall Fractional

Parflex/AtlanticFluoropolymer Tubing Products

Catalog 4150/USAMarch 2003 revised Sept. 2003

http://www.parker.com/ead/cm1.asp?cmid=699

Parker Hannifin CorporationParflex/AtlanticChestnut Ridge, NY

Introduction ....................................................................................................................................................... 3Part Number Matrix ........................................................................................................................................... 3Summary of Properties ..................................................................................................................................... 4

Fluid Handling Tubing & PipeHP PFA Products

Technical Information ............................................................................................................................... 5Fractional Size Tubing ............................................................................................................................. 6Metric Size Tubing ................................................................................................................................... 6Retractable Coils ..................................................................................................................................... 7Schedule 40 Pipe .................................................................................................................................... 7Dual Containment Tubing......................................................................................................................... 8

PFA ProductsTechnical Information ............................................................................................................................... 9Fractional Size Tubing ............................................................................................................................. 10Metric Size Tubing ................................................................................................................................... 11Convoluted Tubing ................................................................................................................................... 11Retractable Coils ..................................................................................................................................... 12Schedule 40 Pipe .................................................................................................................................... 12

FEP ProductsTechnical Information ............................................................................................................................... 13Fractional Size Tubing ............................................................................................................................. 14Metric Size Tubing ................................................................................................................................... 15Convoluted Tubing ................................................................................................................................... 15Retractable Coils ..................................................................................................................................... 16Schedule 40 Pipe .................................................................................................................................... 16

PTFE ProductsTechnical Information ............................................................................................................................... 17Fractional Size Tubing ............................................................................................................................. 18Metric Size Tubing ................................................................................................................................... 19Convoluted Tubing ................................................................................................................................... 19

PVDF ProductsTechnical Information ............................................................................................................................... 20Fractional Size Tubing ............................................................................................................................. 21Metric Size Tubing ................................................................................................................................... 21Schedule 40 Pipe .................................................................................................................................... 21

Electrical Insulation TubingSpaghetti Products

Fractional Spaghetti Tubing ...................................................................................................................... 22PTFE AWG Spaghetti Tubing ................................................................................................................... 23

Heat Shrink ProductsPTFE Fractional Heat Shrink Tubing (2:1), Industrial Wall ......................................................................... 24PTFE Fractional Heat Shrink Tubing (2:1) ................................................................................................ 24PTFE AWG Heat Shrink Tubing (2:1) ....................................................................................................... 25FEP Fractional Heat Shrink Tubing (1.3:1) ................................................................................................ 26FEP AWG Heat Shrink Tubing (1.3:1) ....................................................................................................... 26

PTFE Spiral Cut Cable Wrap ............................................................................................................................. 27PTFE Round Beading/Miniature Rod ................................................................................................................ 28Convoluted Products

PTFE Convoluted Tubing ......................................................................................................................... 29FEP Convoluted Tubing ........................................................................................................................... 29

Offer of Sale ....................................................................................................................................................... 32

Table of Contents Fluoropolymer Tubing Products



3

Overview:

Parflex/Atlantic manufactures an extensive line of highquality fluoropolymer tubing and pipe. A wide range ofproducts are available in PTFE, FEP, PFA, High PurityPFA, and PVDF. Other materials such as ETFE, MFAand PEEK are also available on request (minimums willapply). All tubing and pipe products are made from 100%virgin resins. These fluoropolymers are resistant tonumerous chemicals and solvents. A detailed outline ofthe chemical compatibility and other technical informationis beyond the scope of this catalog. However, acomprehensive technical and chemical compatibilitybulletin is available. Please contact Catalog Services andask for Technical Bulletin 0002-T1/USA.

Consult Price List for individual configuration pricing. For other configurations not listed on Price List, consult factory.*Additional charges may apply for colored, color stripes or cut pieces. Please consult the factory.

Introduction Fluoropolymer Tubing Products

105-0250062-N40025-X

Product Family1 = Fractional2 = Metric3 = Convoluted 4 = Spiral Cut5 = Pipe7 = Retractable Coils9 = CustomA = Formed Part

Resin01 = PTFE02 = PTFE, Hose03 = FEP04 = PFA05 = PFA, HP Generic06 =PFA, Teflon® 450HP07 = PFA, Teflon® 440HP08 = PFA, UHP09 = MFA10 = PVDF11 = PVDF, Superflex12 = ETFE13 = PEEK14 = PTFE, Opaque

Length1000 = 1,000 ft.0500 = 500 ft.0250 = 250 ft.0100 = 100 ft.0050 = 50 ft.0025 = 25 ft.0010 = 10 ft.0005 = 5 ft.0004 = 4 ft.

Outside DiameterExample:0250 = .250 Inches0700 = 7 mm

Wall ThicknessExample:062 = .062 Inches100 = 1 mm

Packaging1 = HP Spool2 = Plastic Spool3 = Wood Spool4 = Coil5 = Straight6 = Cardboard Spool0 = Other C = Cut Length (Inches)*

Part Number Matrix

Solid Color*0 = Black1 = Brown2 = Red3 = Orange4 = Yellow5 = Green6 = Blue7 = Violet8 = Gray9 = WhiteN = Natural

Teflon® is a registered trademark of DuPont.

Stripe Color*Only add suffix if Stripe is required.

0 = Black1 = Brown2 = Red3 = Orange4 = Yellow5 = Green6 = Blue7 = Violet8 = Gray9 = White



4

The table below lists the summary of mechanical, electrical and thermal properties of the resinsfrom which Parflex/Atlantic manufactures its line of tubing and pipe.

LACINAHCEMSEITREPORP MTSA STINU AFP PEF EFTP FDVP

htgnertSelisneT 8071D GISP 000,4 005,3 000,4-005,2 836D003,31

ytivarGcificepS 297D 51.2 51.2 42.2-31.2 8.1

noitcirFfotneiciffeoC cimanyD)nim/tf01<( 2.0 2.0 1.0 71.041.0

htgnertSevisserpmoC 596D GISP 002,2 005,3 006,11

htgnertStcapmI. F°37 652D ni/bL-tF kaerBoN kaerBoN 5.3 6-3

suludoMlaruxelF. F°37 097D GISP 000,59 000,59 000,72

suludoMelisneT 836D GISP 000,04 000,06 000,08 000,843

retemoruD-ssendraH 0422D 06-D 55-D 56-05-D 08-67-D

noitagnolE 8071D % 003 003 004-002 836D051

htgnertSlaruxelF097D GISP kaerBoN kaerBoN kaerBoN 057,01

noitprosbAretaW 075D % 30.0 10.0< 10.0< 40.0<

daoLrednUnoitamrofeD. )RH42,GISP0001,F°37( 126D 0.2 8.1 5.3

noisnapxEfotneiciffeoCraeniL. )F°212-07(. )F°003-212(. )F°804-003(

696D F°/ni/ni01x7.6 5

01x4.9 5

01x1.11 5

01x8.5-5.4 5 01x58.3 5

01x52.4 5

01x50.5 5

01x1.7 5

)TIM(efiLxelF 000,51 000,51 000,000,1>

ecnatsiseRpeerC 476D nIqS/BL 000,04

LACIRTCELESEITREPORP MTSA STINU AFP PEF EFTP FDVP

)mreTtrohS(htgnertScirtceleiD. mliFliM01

941D liM/V000,2> 000,2> 004,1> 080,1>

ytivitsiseRemuloV 752D mc-mho 01 81 01> 81 01> 81 01 31

ytivitsiseRecafruS 752D qS/mho 01> 71 01> 61 01> 81

LAMREHTSEITREPORP MTSA STINU AFP PEF EFTP FDVP

erutarepmeTecivreSsuounitnoC F° 005 004 005 532

tnioPgnitleM ATD F° 095-575 035-005 056-536 253

ytivitcudnoClamrehT 771-C tf/rh/UTB 2 ni.F°/ 23.1 4.1 7.1 13.1

noisuFfotaeH bl/UTB 31 11 73-92

taeHcificepS. C°52. C°001. C°002. C°572

771-C C°/g/laC652.0382.0433.0193.0

62.0 32.052.072.092.0

43.-03.

erutarepmeTnoitxelfeD. ISP66. ISP462

F°661811

831431

252131 532

noitsubmoCfotaeH bl/UTB 002,2 002.2

SEITREPORPREHTO MTSA STINU AFP PEF EFTP FDVP

gnitaRytilibammalF 49LU OV OV OV OV

xednIevitcarteR 245D 53.1 833.1 53.1

xednInegyxOgnitimiL 59> 59> 59>

Summary of Properties Fluoropolymer Tubing Products



5

Product Overview:

High Purity PFA (Perfluoroalkoxy) tubing, made from 100% virgin resin, has the highest molecular weight available. Itis manufactured for use in hostile environments where purity is critical. Testing has proven that these High Purity PFAproducts are able to withstand corrosive surfactants for longer periods of time than the standard products. HighPurity PFA products are available in various sizes upon request.

Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3307 Type II Specification.

Flammability:Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, High PurityPFA tubing resists combustion and does not promote flamespread.

FDA Compliance:

Most high purity PFA resins qualify for use in contact with foodin compliance with FDA regulation 21 CFR 177.1550.

Pressure and Temperature Ranges:

-329° - 500° F (-200° -260° C) See pressure temperature chartfor more information or consult the factory.

Features:

100% virgin PFA resinused on all products.

Semiconductor andpharmaceuticalspecificationconformance.

Translucent and flexiblematerials.

Chemically inert tonearly all industrialchemicals and solvents.

Smooth nonsticksurface resulting in thelowest coefficient offriction.

Lowest levels ofextractables.

Nonflammablematerials.

FDA Compliant.

Benefits:

No processcontamination.

High Purity applications.

Excellent for flowmonitoring systems.

Longer product life andless downtime.

Higher flow with noprocess contamination.

Excellent for high purityapplications.

Safety.

Useful in foodapplications.

.062 wall

.062 wall

.062 wall

.047 wall

.047 wall

.062 wall

.062 wall

350

250

150

50

24.13

17.24

10.34

3.45

12165 176

0

300

400

200

100

27.58

20.68

Fractional SizeHeavy Wall High Purity PFA Tubing

Pressure vs. Temperature Chart

1/4"

1"3/4"1/2"3/8"

Pre

ssur

e (b

ar)

Pre

ssur

e (P

SIG

)

6.90

13.79

Media Temperature (˚C)

2041499338

Media Temperature (˚F)

400350300250200150100

eziSgnibuTllaWXDIXDO

muminiMsuidaRdneB

130.X"61/1X"8/1 2/1 "260.X"8/1X"4/1 2/1 "740.X"23/5X"4/1 4/3 "

"4/1 X"61/3X 130. 1"260.X"4/1X"8/3 4/3 "130.X"61/5X"8/3 "2/1-2

260.X"8/3X"2/1 2/1-2 "130.X"61/7X"2/1 4"

260.X"2/1X"8/5 3"130.X"61/9X"8/5 21 "

260.X"8/5X"4/3 6"230.X"61/11X"4/3 61 "

260.X"4/3X"8/7 21 "260.X"8/7X"1 61 "

570.X01.1X"4/1-1 61 "

HP PFA Fluid Handling Tubing and Pipe



6

Heavy Wall Fractional Size Tubing

Industrial Wall Fractional Size Tubing

Metric Size Tubing

Pressures above are for operation at 73°F. Working pressure calculated using a Safety Factor of 5. Note othermanufacturers may use a Safety Factor of 4. Fractional tubing is supplied in 25 ft. increments up to 1000 ft. continu-ous for sizes up to 1” OD. Consult factory for standard packaging on sizes greater than 1” OD. Custom packaging andsizes are quoted upon request.

Part numbers below are for standard configurations. For complete part numbers and options for material, color,packaging, etc. refer to Part Number Matrix on page 4.

DO rebmuNtraP llaWXDIXDOlanimoN

DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP

DO rebmuNtraPDIXDO

mmDIXDO

hcnIecnareloTDI/DO

mmecnareloTDI/DO

hcnI

"8/1 XXXXXX-1305210-501 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.52(963 )2.821(958,1

"61/3 XXXXXX-1308810-501 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )1.71(942 )4.68(352,1

"4/1 XXXXXX-1300520-501 130.X"61/3X"4/1 052. 500.-/+ 300.-/+ )1.31(091 )2.56(549

"8/3 XXXXXX-1305730-501 130.X"61/5X"8/3 573. 500.-/+ 300.-/+ )6.8(521 )6.34336

"2/1 XXXXXX-1300050-501 130.X"61/7X"2/1 005. 600.-/+ 300.-/+ )6.6(59 )8.23(674

"4/3 XXXXXX-2300570-501 230.X"61/11X"4/3 057. 600.-/+ 300.-/+ )7.4(86 )9.12(813

"61/3 XXXXXX-2608810-501 260.X"61/1X"61/3 881. 500.-/+ 300.-/+ )9.33(294 )9.071(874,2

"4/1 XXXXXX-7400520-501XXXXXX-2600520-501

740.X"23/5X"4/1260.X"8/1X"4/1

052. 500.-/+ 300.-/+)7.91(682)2.62(083

)5.99(344,1)2.031(988,1

"8/3 XXXXXX-2605730-501 260.X"4/1X"8/3 573. 500.-/+ 300.-/+ )9.71(062 )3.88(082,1

"2/1 XXXXXX-2600050-501 260.X"8/3X"2/1 005. 500.-/+ 300.-/+ )4.31(591 )7.66(869

"4/3 XXXXXX-2600570-501 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )1.9(231 )8.44(056

"1 XXXXXX-2600001-501 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.6(001 )8.33(094

"8/1-1 XXXXXX-2605211-501 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )0.6(78 )1.03(634

"4/1-1 XXXXXX-5700521-501 570.X01.1X"4/1-1 052.1 510.-/+ 300.-/+ )5.6(49 )7.23(474

3 XXXXXX-0010030-502 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-502 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-502 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-502 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-502 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-502 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-502 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-502 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-502 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-502 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-502 0.41X0.61 155.X036. 51.-/+ 600.-/+

Consult factory for pressure ratings.




7

Retractable Coils

Pipe is supplied in 5 and 10 foot straights (i.e. 505-0540088-N50010). Custom packaging, lengths, and schedule 80pipe are quoted upon request.

Schedule 40 PipeStandard left/right tail length is 6 inches. Please consult factory for special coil lengths and/or ID’s.

rebmuNtraP DIXDODIlioC

)mm(hcnI"A"htgneLdetcarteR

)mm(hcnIhtgneLdednetxE

)mm(hcnI

rebmuNtraP eziShcnIlanimoNDOlautcA

hcnIllaWmuminiM

hcnIecnareloTDO

hcnIecnareloTllaW

hcnI

RightLength

ALeft

Length


XX-2608810-507 3000 "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

X-2608810-507 6000X "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

X-2608810-507 2100X "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

X-2608810-507 8100X "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

X-2600520-507 3000X 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

X-2600520-507 6000X 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

X-2600520-507 2100X 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

X-2600520-507 8100X 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

130-507 2 X-260 3000X 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

130-507 2 X-260 6000X 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

130-507 2 X-260 2100X 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

130-507 2 X-260 8100X 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

X-2605730-507 3000X 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

X-2605730-507 6000X 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

X-2605730-507 2100X 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

X-2605730-507 5100X 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

X-2605730-507 8100X 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

X-2608340-507 3000X 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

X-2608340-507 6000X 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

X-2608340-507 2100X 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

X-2600050-507 3000X "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

X-2600050-507 6000X "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

X-2600050-507 2100X "8/3X"2/1 00.3 )2.67( 21 )503( 84 )9121(

XXXXXX-8800450-505 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-505 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-505 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-505 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-505 "2 573.2 451. 510.-/+ 00.-/020.+



8


Dual Containment Tubing

ML00500520PHNOCLAUDssecorP

tnemniatnoC740.X"23/5X"4/1

260.X"8/3X"2/1052.005.

500.-/+500.-/+

300.-/+300.-/+

loops.tf003


tnemniatnoC260.X"8/3X"2/1260.X"8/5X"4/3

005.057.

500.-/+600.-/+

300.-/+300.-/+

loops.tf003


tnemniatnoC260.X"8/5X"4/3

260.X"8/7X"1057.000.1

500.-/+010.-/+

300.-/+300.-/+

loops.tf003

Dual containment tubing provides long continuous lengths while reducing the number of connections and weldingjoints. The design utilizes a HP PFA inner process line for excellent chemical resistance. The FEP outer containmentline provides clear visibility of the inner process line. Both process and containment lines are laser marked for trace-ability. Consult the factory for custom packaging, other resins and sizes, or more information.

rebmuNtraP eniL llaWXDIXDOlanimoN

DODO

ecnareloTllaW

ecnareloTdradnatSgnigakcaP



9

Product Overview:

Parflex/Atlantic’s line of Fluoropolymer tubing is well suited for any corrosive or high purity application. PFA TubingProducts are available in several grades and sizes, and are offered in numerous lengths. PFA (Perfluoroalkoxy) is thematerial of choice in applications requiring excellent chemical resistance, high temperature exposure, clarity and longcontinuous lengths. Parflex/Atlantic’s resin is a standard grade with a high molecular weight and high resistance tostress cracking. The tubing can be used with flare or conventional fittings, and is available in a wide range of sizes.Schedule 40 Pipe is also available.

Features:

100% virgin PFA resinused on all products.

Translucent and flexiblematerials.



Low permeability.


FDA Compliant.

Weather resistant.

Benefits:


Excellent for flowmonitoring systems.


Higher flow with noprocess contamination.

Useful in severechemical and gasservice.

Safety.


Excellent for outdooruse in extremeconditions.

Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3307 Specification.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, PFA tubingresists combustion and does not promote flame spread.

FDA Compliance:

Most PFA resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1550.

Pressure and Temperature Ranges:

-329° - 500° F (-200° -260° C) See pressure temperature chartfor more information or consult the factory.

.062 wall

.062 wall

.062 wall

.047 wall

.047 wall

.062 wall

.062 wall

350

250

150

50

24.13

17.24

10.34

3.45

12165 176

0

300

400

200

100

27.58

20.68

Fractional SizeHeavy Wall PFA Tubing

Pressure vs. Temperature Chart

1/4"

1"3/4"1/2"3/8"

Pre

ssur

e (b

ar)

Pre

ssur

e (P

SIG

)

6.90

13.79

Media Temperature (˚C)

2041499338

Media Temperature (˚F)

400350300250200150100


muminiMsuidaRdneB

130.X"61/1X"8/1 2/1 "260.X"8/1X"4/1 2/1 "740.X"23/5X"4/1 4/3 "

"4/1 X"61/3X 130. 1"260.X"61/3X"61/5 "2/1130.X"4/1X"61/5 "4/3-1

260.X"4/1X"8/3 4/3 "130.X"61/5X"8/3 "2/1-2

260.X"8/3X"2/1 2/1-2 "130.X"61/7X"2/1 4"

260.X"2/1X"8/5 3"130.X"61/9X"8/5 21 "

260.X"8/5X"4/3 6"230.X"61/11X"4/3 61 "

260.X"4/3X"8/7 21 "260.X"8/7X"1 61 "

570.X01.1X"4/1-1 61 "

PFA Fluid Handling Tubing and Pipe



10






DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP


"23/3 XXXXXX-1304900-401 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )6.33(784 )1.961(354,2

"8/1 XXXXXX-1305210-401 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.52(963 )2.821(958,1

"23/5 XXXXXX-1306510-401 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )5.02(792 )2.301(794,1

"61/3 XXXXXX-1308810-401 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )1.71(942 )4.68(352,1

"4/1 XXXXXX-1300520-401 130.X"61/3X"4/1 052. 500.-/+ 300.-/+ )1.31(091 )2.56(549

"61/5 XXXXXX-1302130-401 130.X"4/1X"61/5 213. 500.-/+ 300.-/+ )4.01(051 )3.25(857

"8/3 XXXXXX-1305730-401 130.X"61/5X"8/3 573. 500.-/+ 300.-/+ )6.8(521 )6.34(336

"61/7 XXXXXX-1308340-401 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )4.7(801 )5.73(345

"2/1 XXXXXX-1300050-401 130.X"61/7X"2/1 005. 600.-/+ 300.-/+ )6.6(59 )8.23(674

"61/9 XXXXXX-1303650-401 130.x"2/1x"61/9 365. 600.-/+ 300.-/+ )8.5(48 )2.92(424

"8/5 XXXXXX-1305260-401 130.X"61/9X"8/5 526. 600.-/+ 300.-/+ )2.5(57 )7.62(183

"61/11 XXXXXX-1308860-401 130.X"8/5X"61/11 886. 600.-/+ 300.-/+ )7.4(96 )9.32(743

"4/3 XXXXXX-2300570-401 230.X"61/11X"4/3 057. 600.-/+ 300.-/+ )7.4(86 )9.12(813

038. XXXXXX-0400380-401 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.5(67 )3.62(183

569. XXXXXX-5405690-401 540.X"8/7X569. 569. 700.-/+ 300.-/+ )1.5(37 )5.52(963

01.1 XXXXXX-0500011-401 050.X"1X01.1 001.1 700.-/+ 400.-/+ )0.4(85 )3.02(492

502.1 XXXXXX-0405021-401 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )6.3(25 )2.81(462

033.1 XXXXXX-0400331-401 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )3.3(74 )5.61(932

085.1 XXXXXX-0400851-401 040.X"2/1-1X085.1 085.1 510.-/+ 400.-/+ )8.2(04 )9.31(102

"61/3 XXXXXX-2608810-401 260.X"61/1X"61/3 881. 500.-/+ 300.-/+ )9.33(294 )9.071(874,2

"4/1 XXXXXX-7400520-401XXXXXX-2600520-401

740.X"23/5X"4/1260.X"8/1X"4/1

052. 500.-/+ 300.-/+)7.91(682)2.62(083

)5.99(344,1)2.031(988,1

"61/5 XXXXXX-2602130-401 260.X"61/3X"61/5 213. 500.-/+ 300.-/+ )9.02(303 )2.501(525,1

"8/3 XXXXXX-2605730-401 260.X"4/1X"8/3 573. 500.-/+ 300.-/+ )9.71(062 )3.88(082,1

"61/7 XXXXXX-2608340-401 260.X"61/5X"61/7 834. 500.-/+ 300.-/+ )1.51(912 )0.67(201,1

"2/1 XXXXXX-2600050-401 260.X"8/3X"2/1 005. 500.-/+ 300.-/+ )4.31(591 )7.66(869

"61/9 XXXXXX-2603650-401 260.x"61/7x"61/9 365. 600.-/+ 300.-/+ )8.11(171 )5.95(268

"8/5 XXXXXX-2605260-401 260.X"2/1X"8/5 526. 600.-/+ 300.-/+ )0.11(061 )6.35(877

"61/11 XXXXXX-2608860-401 260.X"61/9X"61/11 886. 600.-/+ 300.-/+ )7.9(141 )8.84(807

"4/3 XXXXXX-2600570-401 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )1.9(231 )8.44(056

"8/7 XXXXXX-2605780-401 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )7.7(211 )5.83(955

"1 XXXXXX-2600001-401 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.6(001 )8.33(094

"8/1-1 XXXXXX-2605211-401 260.X"1X"8/1-1 521.1 510.-/+ 400.-/+ )0.6(78 )1.03(634

"4/1-1 XXXXXX-2600521-401 260.X"8/1-1X"4/1-1 052.1 510.-/+ 400.-/+ )4.5(87 )1.72(393

"8/3-1 XXXXXX-26005731-401 260.X"4/1-1X"8/3-1 573.1 510.-/+ 400.-/+ )9.4(17 )6.42(753

"8/1-2 XXXXXX-2605212-401 260.X"2X"8/1-2 521.2 510.-/+ 400.-/+ )2.3(64 )0.61(232



11

Convoluted Tubing

Metric Size Tubing

DO rebmuNtraPDIXDO

mmDIXDO

hcnIecnareloTDI/DO

mmecnareloTDI/DO

hcnI


3 XXXXXX-0010030-402 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-402 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-402 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-402 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-402 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-402 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-402 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-402 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-402 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-402 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-402 0.41X0.61 155.X036. 51.-/+ 600.-/+

BA


OPTION WITH FLARE NUT ASSEMBLYCONSULT FACTORY FOR PRICING

Convoluted tubing is used in applications where smaller bend diameters are required. Convoluted tubing is made toorder. Custom sizes, colors, packaging, and PTFE liners are also available. Please consult factory.

rebmuNtraP DO "A" "B"DIX llaWlanimoN suidaRdneB hctiP

-403 0205730 XXXXXX- "8/3 X "4/1 020. "2/1 8

-403 3200050 XXXXXX- "2/1 X "8/3 320. "4/3 8

3 -40 5200570 XXXXXX- "4/3 X "8/5 520. "2/1-1 8

03 4- 5200001 XXXXXX- "1 X "8/7 520. "2/1-2 8



12

Retractable Coils

Standard left/right tail length is 6 inches. Please consult factory for special coil lengths and/or ID’s.

Schedule 40 Pipe

Pipe is supplied in 5 and 10 foot straights (i.e. 504-0540088-N50010). Custom packaging, lengths, and schedule 80pipe are quoted upon request. Please consult factory.




)mm(hcnI


hcnIllaWmuminiM

hcnIecnareloTDO

hcnIecnareloTllaW

hcnI

XXXXXX-8800450-405 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-405 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-405 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-405 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-405 "2 573.2 451. 510.-/+ 00.-/020.+

RightLength

ALeft

Length


608810-407 3000XX-2 "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

608810-407 6000XX-2 "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

608810-407 2100XX-2 "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

2608810-407 8100XX- "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

2600520-407 3000XX- 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

-2600520-407 X 6000X 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

-2600520-407 2100XX 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

-2600520-407 8100XX 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

130-407 2 -260 000XX 3 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

130-407 2 -260 6000XX 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

130-407 2 -260 2100XX 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

130-407 2 -260 8100XX 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

30-407 3000XX-26057 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

-2605730-407 6000XX 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

-2605730-407 2100XX 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

-2605730-407 5100XX 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

-2605730-407 8100XX 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

-2608340-407 3000XX 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

-2608340-407 6000XX 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

-2608340-407 2100XX 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

-2600050-407 3000XX "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

-2600050-407 6000XX "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

-2600050-407 2100XX "8/3X"2/1 00.3 )2.67( 21 )503( )9121(84



13

Product Overview:

Parflex/Atlantic’s line of FEP (Fluorinated Ethylene Propylene) tubing exhibits the highest clarity offered. This claritymakes this tubing ideal for flow monitoring applications. FEP also uses a high molecular weight resin that has the beststress crack resistance. It is also widely used in water purification systems due to its excellent transmission of UVlight. FEP resin meets the FDA requirements for repeated food contact. The product is available in various sizes oftubing and pipe.

Specifications:

Materials:

FEP products in this catalog are manufactured using resinscomplying with ASTM D 3296-98 Specification.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, FEP tubingresists combustion and does not promote flame spread.

FDA Compliance:

Most FEP resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1550.

Temperature Ranges:

-410° - 400° F (-246° -204° C) More pressure temperatureinformation is available from the factory upon request.

Benefits:

Highest qualityproducts.

Excellent for flowmonitoring applications.


Useful in applicationsrequiring thermalcycling.


Safety.


Features:

100% virgin FEP resinused on all products.

Most translucentFluoropolymer available.


High abrasionresistance and thermalstability.

Low permeability.


FDA Compliant.

FEP Fluid Handling Tubing and Pipe


muminiMsuidaRdneB

130.X"61/1X"8/1 2/1 "260.X"8/1X"4/1 2/1 "740.X"23/5X"4/1 4/3 "

"4/1 X"61/3X 130. 1"260.X"61/3X"61/5 "2/1130.X"4/1X"61/5 "4/3-1

260.X"4/1X"8/3 4/3 "130.X"61/5X"8/3 "2/1-2

260.X"8/3X"2/1 2/1-2 "130.X"61/7X"2/1 4"

260.X"2/1X"8/5 3"130.X"61/9X"8/5 21 "

260.X"8/5X"4/3 6"230.X"61/11X"4/3 61 "

260.X"4/3X"8/7 21 "260.X"8/7X"1 61 "



14







DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP

"23/3 XXXXXX-1304900-301 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )8.62(983 )3.531(269,1

"8/1 XXXXXX-1305210-301 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )3.02(592 )5.201(784,1

"23/5 XXXXXX-1306510-301 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )4.61(832 )6.28(791,1

"61/3 XXXXXX-1308810-301 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )7.31(991 )1.96(200,1

"4/1 XXXXXX-1300520-301 130.X"61/3X"4/1 052. 500.-/+ 300.-/+ )3.01(051 )1.25(657

"61/5 XXXXXX-1302130-301 130.X"4/1X"61/5 213. 500.-/+ 300.-/+ )3.8(021 )8.14(606

"8/3 XXXXXX-1305730-301 130.X"61/5X"8/3 573. 500.-/+ 300.-/+ )9.6(001 )9.43(605

"61/7 XXXXXX-1308340-301 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )9.5(68 )0.03(534

"2/1 XXXXXX-1300050-301 130.X"61/7X"2/1 005. 600.-/+ 300.-/+ )2.5(57 )3.62(183

"61/9 XXXXXX-1303650-301 130.x"2/1x"61/9 365. 600.-/+ 300.-/+ )6.4(76 )4.32(933

"8/5 XXXXXX-1305260-301 130.X"61/9X"8/5 526. 600.-/+ 300.-/+ )1.4(06 )0.12(503

"61/11 XXXXXX-1308860-301 130.X"8/5X"61/11 886. 600.-/+ 300.-/+ )8.3(55 )1.91(872

"4/3 XXXXXX-2300570-301 230.X"61/11X"4/3 057. 600.-/+ 300.-/+ )7.3(45 )6.71(552

038. XXXXXX-0400380-301 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.4(16 )0.12(503

569. XXXXXX-5405690-301 540.X"8/7X569. 569. 700.-/+ 300.-/+ )0.4(95 )4.02(592

01.1 XXXXXX-0500011-301 050.X"1X01.1 001.1 010.-/+ 400.-/+ )2.3(74 )2.61(532

502.1 XXXXXX-0405021-301 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )9.2(24 )5.41(112

033.1 XXXXXX-0400331-301 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )6.2(83 )2.31(191

"61/3 XXXXXX-2608810-301 260.X"61/1X"61/3 881. 500.-/+ 300.-/+ )1.72(393 )7.631(389,1

"4/1 XXXXXX-7400520-301XXXXXX-2600520-301

740.X"23/5X"4/1260.X"8/1X"4/1

052. 500.-/+ 300.-/+)8.51(922)7.02(003

)6.97(451,1)2.401(115,1

"61/5 XXXXXX-2602130-301 260.X"61/3X"61/5 213. 500.-/+ 300.-/+ )7.61(242 )1.48(022,1

"8/3 XXXXXX-2605730-301 260.X"4/1X"8/3 573. 500.-/+ 300.-/+ )5.41(012 )6.07(420,1

"61/7 XXXXXX-2608340-301 260.X"61/5X"61/7 834. 500.-/+ 300.-/+ )1.21(571 )8.06(288

"2/1 XXXXXX-2600050-301 260.X"8/3X"2/1 005. 500.-/+ 300.-/+ )0.11(061 )4.35(477

"61/9 XXXXXX-2603650-301 260.x"61/7x"61/9 365. 600.-/+ 300.-/+ )4.9(731 )6.74(096

"8/5 XXXXXX-2605260-301 260.X"2/1X"8/5 526. 600.-/+ 300.-/+ )6.8(521 )9.24(226

"61/11 XXXXXX-2608860-301 260.X"61/9X"61/11 886. 600.-/+ 300.-/+ )8.7(211 )1.93(765

"4/3 XXXXXX-2600570-301 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )2.7(501 )9.53(025

"8/7 XXXXXX-2605780-301 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )2.6(09 )8.03(744

"1 XXXXXX-2600001-301 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )5.5(08 )0.72(293

"8/1-1 XXXXXX-2605211-301 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )8.4(96 )0.42(943

"4/1-1 XXXXXX-2600521-301 260.X"8/1-1X"4/1-1 052.1 510.-/+ 400.-/+ )3.4(26 )7.12(413

"8/3-1 XXXXXX-2605731-301 260.X"4/1-1X"8/3-1 573.1 510.-/+ 400.-/+ )9.3(75 )7.91(682

"8/1-2 XXXXXX-2605212-301 260.X"2X"8/1-2 521.2 510.-/+ 400.-/+ )5.2(73 )8.21(681



15

Convoluted Tubing


Metric Tubing

DO rebmuNtraPDIXDO

mmDIXDO

hcnIecnareloTDI/DO

mmecnareloTDI/DO

hcnI

3 XXXXXX-0010030-302 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-302 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-302 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-302 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-302 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-302 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-302 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-302 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-302 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-302 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-302 0.41X0.61 155.X036. 51.-/+ 600.-/+


BA

Convoluted tubing is used in applications where smaller bend diameters are required. Convoluted tubing is made toorder. Custom sizes, colors, packaging, and PTFE liners are quoted upon request.

rebmuNtraP "B"DIX"A"DO llaWlanimoN suidaRdneB hctiP

OPTION WITH FLARE NUT ASSEMBLYCONSULT FACTORY FOR PRICING

03 3- 0205730 XXXXXX- "8/3 X "4/1 020. "2/1 8

03 3- 3200050 XXXXXX- "2/1 X "8/3 320. "4/3 8

303- 5200570 XXXXXX- "4/3 X "8/5 520. "2/1-1 8

03 3- 5200001 XXXXXX- "1 X "8/7 520. "2/1-2 8



16

Retractable Coils

Standard left/right tail length is 6 inches. Please consult factory for special coil lengths and/or ID’s.

Schedule 40 Pipe



RightLength

ALeft

Length




)mm(hcnI

XX-2608810-307 3000 "61/1X"61/3 057. )1.91( 3 )67( 21 )503(

07 3 X-2608810- 6000X "61/1X"61/3 057. )1.91( 6 )251( 42 )016(

X-2608810-307 2100X "61/1X"61/3 057. )1.91( 21 )503( 84 )9121(

X-2608810-307 8100X "61/1X"61/3 057. )1.91( 81 )754( 27 )9281(

X-2600520-307 3000X 4/1 " "8/1X 00.1 )4.52( 3 )67( 21 )503(

X-2600520-307 6000X 4/1 " "8/1X 00.1 )4.52( 6 )251( 42 )016(

X-2600520-307 2100X 4/1 " "8/1X 00.1 )4.52( 21 )503( 84 )9121(

X-2600520-307 8100X 4/1 " "8/1X 00.1 )4.52( 81 )754( 27 )9281(

130-307 2 X-260 3000X 61/5 " "61/3X 526.1 )3.14( 3 )67( 21 )503(

X-2602130-307 6000X 61/5 " "61/3X 526.1 )3.14( 6 )251( 42 )016(

X-2602130-307 2100X 61/5 " "61/3X 526.1 )3.14( 21 )503( 84 )9121(

X-2602130-307 8100X 61/5 " "61/3X 526.1 )3.14( 81 )754( 27 )9281(

X-2605730-307 3000X 8/3 " "4/1X 526.1 )3.14( 3 )67( 21 )503(

X-2605730-307 6000X 8/3 " "4/1X 526.1 )3.14( 6 )251( 42 )016(

X-2605730-307 2100X 8/3 " "4/1X 526.1 )3.14( 21 )503( 84 )9121(

X-2605730-307 5100X 8/3 " "4/1X 526.1 )3.14( 51 )183( 06 )4251(

X-2605730-307 8100X 8/3 " "4/1X 526.1 )3.14( 81 )754( 27 )9281(

X-2608340-307 3000X 61/7 " "61/5X 00.3 )2.67( 3 )67( 21 )503(

X-2608340-307 6000X 61/7 " "61/5X 00.3 )2.67( 6 )251( 42 )016(

X-2608340-307 2100X 61/7 " "61/5X 00.3 )2.67( 21 )503( 84 )9121(

X-2600050-307 3000X "8/3X"2/1 00.3 )2.67( 3 )67( 21 )503(

X-2600050-307 6000X "8/3X"2/1 00.3 )2.67( 6 )251( 42 )016(

X-2600050-307 2100X "8/3X"2/1 00.3 )2.67( 21 )503( 84 )9121(


hcnIllaWmuminiM

hcnIecnareloTDO

hcnIecnareloTllaW

hcnI

XXXXXX-8800450-305 "4/1 045. 880. 010.-/+ 00.-/020.+

XXXXXX-9010480-305 "2/1 048. 901. 010.-/+ 00.-/020.+

XXXXXX-3110501-305 "4/3 050.1 311. 010.-/+ 00.-/020.+

XXXXXX-3315131-305 "1 513.1 331. 510.-/+ 00.-/020.+

XXXXXX-4515732-305 "2 573.2 451. 510.-/+ 00.-/020.+



17

Product Overview:

Parflex/Atlantic’s line of PTFE (Polytetrafluoroethylene) tubing is the most flexible product offered. PTFE tubing resistscorrosive liquids and gases, and has the broadest temperature range of all Fluoropolymer products. The tubing hasa smooth non-stick surface with low permeability.

Features:

100% virgin PTFE resinused on all products.

Most flexibleFluoropolymer available.



Low permeability.


FDA Compliant.

Excellent electricalproperties.

Benefits:

Highest qualityproducts.

Longer lasting.


Higher abrasionresistance with noprocess contamination.


Safety.


Useful in insulationapplications.

Specifications:

Materials:

PTFE Products in this catalog are manufactured using resinscomplying with ASTM D 3295 Specification.

Flammability:

Listed VW-1 by the Underwriters’ Laboratories, Inc. in theirburning test classification for polymeric materials and passesthe UL 83 vertical flame test. In a flame situation, PTFE tubingresists combustion and does not promote flame spread.

FDA Compliance:

All PTFE resins qualify for use in contact with food in compliancewith FDA regulation 21 CFR 177.1550.

Temperature Ranges:


PTFE Fluid Handling Tubing and Pipe


muminiMsuidaRdneB

130.X"61/1X"8/1 2/1 "260.X"8/1X"4/1 2/1 "740.X"23/5X"4/1 4/3 "

"4/1 X"61/3X 130. 1"260.X"61/3X"61/5 "2/1130.X"4/1X"61/5 "4/3-1

260.X"4/1X"8/3 4/3 "130.X"61/5X"8/3 "2/1-2

260.X"8/3X"2/1 2/1-2 "130.X"61/7X"2/1 4"

260.X"2/1X"8/5 3"130.X"61/9X"8/5 21 "

260.X"8/5X"4/3 6"230.X"61/11X"4/3 61 "

260.X"4/3X"8/7 21 "260.X"8/7X"1 61 "



18



Pressures above are for operation at 73°F. Working pressure calculated using a Safety Factor of 5. Note othermanufacturers may use a Safety Factor of 4. Fractional tubing for sizes up to 1” OD is supplied in random length coilswith a minimum coil length of 15 feet and a maximum of 3 pieces per 100 feet. Sizes over 1” OD are supplied in 5 or10 foot straights. Custom packaging and sizes are quoted upon request.




DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP

"23/3 XXXXXX-1304900-101 130.X"23/1X"23/3 490. 400.-/+ 300.-/+ )8.62(983 )3.531(269,1

"8/1 XXXXXX-1305210-101 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )3.02(592 )5.201(784,1

"23/5 XXXXXX-1306510-101 130.x"23/3X"23/5 751. 500.-/+ 300.-/+ )4.61(832 )6.28(791,1

"61/3 XXXXXX-1308810-101 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )7.31(991 )1.96(200,1

"4/1 XXXXXX-1300520-101 130.X"61/3X"4/1 052. 500.-/+ 300.-/+ )3.01(051 ))1.25(657

"61/5 XXXXXX-1302130-101 130.X"4/1X"61/5 213. 500.-/+ 300.-/+ )3.8(021 )8.14(606

"8/3 XXXXXX-1305730-101 130.X"61/5X"8/3 573. 500.-/+ 300.-/+ )9.6(001 )9.43(605

"61/7 XXXXXX-1308340-101 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )9.5(68 )0.03(534

"2/1 XXXXXX-1300050-101 130.X"61/7X"2/1 005. 600.-/+ 300.-/+ )2.5(57 )3.62(183

"61/9 XXXXXX-1303650-101 130.x"2/1x"61/9 365. 600.-/+ 300.-/+ )6.4(76 )4.32(933

"8/5 XXXXXX-1305260-101 130.X"61/9X"8/5 526. 600.-/+ 300.-/+ )1.4(06 )0.12(503

"61/11 XXXXXX-1308860-101 130.X"8/5X"61/11 886. 600.-/+ 300.-/+ )8.3(55 )1.91(872

"4/3 XXXXXX-2300570-101 230.X"61/11X"4/3 057. 600.-/+ 300.-/+ )4.3(05 )6.71(552

038. XXXXXX-0400380-101 040.X"4/3X038. 038. 600.-/+ 300.-/+ )2.4(16 )7.12(503

569. XXXXXX-5405690-101 540.X"8/7X569. 569. 700.-/+ 300.-/+ )0.4(95 )4.02(592

01.1 XXXXXX-0500011-101 050.X"1X01.1 001.1 010.-/+ 400.-/+ )2.3(74 )7.61(532

502.1 XXXXXX-0405021-101 040.X"8/1-1X502.1 502.1 510.-/+ 400.-/+ )9.2(24 )0.51(112

033.1 XXXXXX-0400331-101 040.X"4/1-1X033.1 033.1 510.-/+ 400.-/+ )6.2(83 )2.31(191

085.1 XXXXXX-0400851-101 040.X"2/1-1X085.1 085.1 510.-/+ 400.-/+ )2.2(23 )1.11(161

"61/3 XXXXXX-2608810-101 260.X"61/1X"61/3 881. 500.-/+ 300.-/+ )1.72(393 )7.631(389,1

"4/1 XXXXXX-7400520-101XXXXXX-2600520-101

740.X"23/5X"4/1260.X"8/1X"4/1

052. 500.-/+ 300.-/+)8.51(922)7.02(003

)6.97)451,1)2.401(115,1

"61/5 XXXXXX-2602130-101 260.X"61/3X"61/5 213. 500.-/+ 300.-/+ )7.61(242 )1.48(0221

"8/3 XXXXXX-2605730-101 260.X"4/1X"8/3 573. 500.-/+ 300.-/+ )8.31(002 )6.07(420,1

"61/7 XXXXXX-2608340-101 260.X"61/5X"61/7 834. 500.-/+ 300.-/+ )1.21(571 )8.06(288

"2/1 XXXXXX-2600050-101 260.X"8/3X"2/1 005. 500.-/+ 300.-/+ )3.01(051 )4.35(477

"61/9 XXXXXX-2603650-101 260.x"61/7x"61/9 365. 600.-/+ 300.-/+ )4.9(731 )6.74(096

"8/5 XXXXXX-2605260-101 260.X"2/1X"8/5 526. 600.-/+ 300.-/+ )6.8(521 )9.24(226

"61/11 XXXXXX-2608860-101 260.X"61/9X"61/11 886. 600.-/+ 300.-/+ )8.7(211 )1.93(765

"4/3 XXXXXX-2600570-101 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )9.6(001 )9.53(025

"8/7 XXXXXX-2605780-101 260.x"4/3X"8/7 578. 700.-/+ 300.-/+ )2.6(09 )8.03(744

"1 XXXXXX-2600001-101 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )5.5(08 )0.72(293



19

Convoluted Tubing

Convoluted tubing is made to order. Custom packaging, sizes, and colors are quoted upon request. Additional charg-es may apply for custom cuffs.Stock packaging is random coils.Specifications: MIL-T-81914/1; additional sizes including /2, Class 1 & 2 also available.


Metric Size Tubing

DO rebmuNtraPDIXDO

mmDIXDO

hcnIecnareloTDI/DO

mmecnareloTDI/DO

hcnI

3 XXXXXX-0010030-302 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-302 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-302 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-302 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-302 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-302 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-302 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-302 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-302 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-302 0.21X0.41 274.X155. 51.-/+ 600.-/+

61 XXXXXX-0010061-302 0.41X0.61 155.X036. 51.-/+ 600.-/+


CE

DBA

rebmuNtraP "B"DIX"A"DO "C"llaW "D"DOffuC "E"htgneLffuC suidaRdneB hctiP

-103 3200230 XXXXXX- 181.X023. 320. 082. 4/3 " "2/1 8

-103 7200540 XXXXXX- 4. 05 .X 303 720. . 514 1" "8/7 7

3 -10 7200950 XXXXXX- . 095 .X 524 720. . 045 1" "4/1-1 6

-103 9200660 XXXXXX- . 066 .X 584 920. . 376 4/1-1 " "2/1-1 6

-103 5300870 XXXXXX- . 087 .X 806 530. . 008 2/1-1 " "4/3-1 6

-103 5300011 XXXXXX- 001.1 .X 058 530. 060.1 2" "4/1-2 2/1-4

3 -10 5300931 XXXXXX- 093.1 X 501.1 530. 013.1 2 2/1- " "4/3-2 4

-103 5309351 XXXXXX- 935.1 X 012.1 530. 065.1 "2/1-2 "3 4

3 -10 0400012 XXXXXX- 2 X001. 096.1 040. 080.2 2/1-2 " "3 4



20

Product Overview:

PVDF (Polyvinylidene Fluoride) is a tough engineering Fluoropolymer that offers a combination of properties benefi-cial for use in many critical applications requiring chemical resistance with low permeability. PVDF exhibits low ex-tractable levels, while providing high mechanical strength, excellent abrasion resistance, and good resistance tomany chemicals and solvents. Atlantic’s PVDF tubing is excellent for use in ultra pure water systems and for groundwater monitoring.

Features:

100% virgin PVDF resinused on all products.

Good chemicalresistance.

Low permeability.

Weather resistant.

UV and radiationresistance.

High abrasionresistance and thermalstability.

FDA Compliant.

Benefits:


Useful in mostapplications with longcycle life.

Useful in severechemical and gasapplications.

Excellent for outdooruse under extremeconditions.

Useful in severeapplications.

Useful in thermalcycling applications.


Specifications:

Materials:

Products in this catalog are manufactured using resinscomplying with ASTM D 3222 Specification.

Flammability:

Listed 94-VO rated by the Underwriters’ Laboratories, Inc. intheir burning test classification for polymeric materials andpasses the UL 83 vertical flame test. In a flame situation, PVDFtubing resists combustion and does not promote flame spread.

FDA Compliance:

Most PVDF resins qualify for use in contact with food incompliance with FDA regulation 21 CFR 177.1500.

Temperature Ranges:


PVDF Fluid Handling Tubing and Pipe


muminiMsuidaRdneB

130.X"61/1X"8/1 2/1 "260.X"8/1X"4/1 2/1 "740.X"23/5X"4/1 4/3 "

"4/1 X"61/3X 130. 1"260.X"61/3X"61/5 "2/1130.X"4/1X"61/5 "4/3-1

260.X"4/1X"8/3 4/3 "130.X"61/5X"8/3 "2/1-2

260.X"8/3X"2/1 2/1-2 "130.X"61/7X"2/1 4"

260.X"2/1X"8/5 3"260.X"8/5X"4/3 6"

230.X"61/11X"4/3 61 "260.X"8/7X"1 61 "



21

PVDF Fluid Handling Tubing and Pipe


3 XXXXXX-0010030-012 0.1X0.3 930.X811. 11.-/+ 400.-/+

4 XXXXXX-0010040-012 0.2X0.4 870.X751. 11.-/+ 400.-/+

5 XXXXXX-0010050-012 0.3X0.5 811X791. 11.-/+ 400.-/+

6 XXXXXX-0010060-012 0.4X0.6 751.X632. 31.-/+ 500.-/+

7 XXXXXX-0010070-012 0.5X0.7 791.X672. 31.-/+ 500.-/+

8 XXXXXX-0010080-012 0.6X0.8 632.X513. 31.-/+ 500.-/+

9 XXXXXX-0010090-012 0.7X0.9 672.X453. 31.-/+ 500.-/+

01 XXXXXX-0010001-012 0.8X0.01 513.X393. 31.-/+ 500.-/+

21 XXXXXX-0010021-012 0.01X0.21 393.X274. 51.-/+ 600.-/+

41 XXXXXX-0010041-012 0.21X0.41 274.X155. 51.-/+ 600.-/+

Industrial Wall Fractional Tubing

Metric Tubing

Heavy Wall Fractional Tubing


Schedule 40 Pipe


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP

"8/1 XXXXXX-1305210-011 130.X"61/1X"8/1 521. 400.-/+ 300.-/+ )4.81(762 )9.29(843,1

"61/3 XXXXXX-1308810-011 130.X"8/1X"61/3 881. 500.-/+ 300.-/+ )4.21(081 )6.26(809

"4/1 XXXXXX-1300520-011 130.X"61/3X"4/1 052. 500.-/+ 300.-/+ )7.11(071 )2.74(586

"61/5 XXXXXX-1302130-011 130.X"4/1X"61/5 213. 500.-/+ 300.-/+ )5.7(901 )9.73(055

"8/3 XXXXXX-1305730-011 130.X"61/5X"8/3 573. 500.-/+ 300.-/+ )6.7(111 )6.13(954

"61/7 XXXXXX-1308340-011 130.X"8/3X"61/7 834. 500.-/+ 300.-/+ )4.5(87 )2.72(493

"2/1 XXXXXX-1300050-011 130.X"61/7X"2/1 005. 600.-/+ 300.-/+ )7.5(38 )8.32(543

"61/9 XXXXXX-1303650-011 130.x"2/1x"61/9 365. 600.-/+ 300.-/+ )2.4(16 )2.12(703


DODO

ecnareloTllaW

ecnareloTgnikroW

)rab(GISPtsruB

)rab(GISP

"4/1 XXXXXX-7400520-011XXXXXX-2600520-011

740.X"23/5X"4/1260.X"8/1X"4/1

052. 500.-/+ 300.-/+)3.41(802)7.22(033

)1.27(640,1)4.49(963,1

"61/5 XXXXXX-2602130-011 260.X"61/3X"61/5 213. 500.-/+ 300.-/+ )1.51(912 )3.67(601,1

"8/3 XXXXXX-2605730-011 260.X"4/1X"8/3 573. 500.-/+ 300.-/+ )4.51(422 )0.46(829

"2/1 XXXXXX-2600050-011 260.X"8/3X"2/1 005. 500.-/+ 300.-/+ )7.11(961 )3.84(107

"8/5 XXXXXX-2605260-011 260.X"2/1X"8/5 526. 600.-/+ 300.-/+ )4.9(631 )9.83(465

"4/3 XXXXXX-2600570-011 260.X"8/5X"4/3 057. 600.-/+ 300.-/+ )9.7(411 )5.23(274

"1 XXXXXX-2600001-011 260.X"8/7X"1 000.1 010.-/+ 300.-/+ )9.5(68 )5.42(553

"8/1-1 XXXXXX-2605211-011 260.X"1X"8/1-1 521.1 510.-/+ 300.-/+ )3.4(36 )8.12(613

DO rebmuNtraPDIXDO

mmDIXDO

hcnIecnareloTDI/DO

mmecnareloTDI/DO

hcnI


hcnIllaWmuminiM

hcnIecnareloTDO

hcnIecnareloTllaW

hcnI

XXXXXX-8800450-015 "4/1 045. 880. 010.-/+ 00.-/020.+XXXXXX-9010480-015 "2/1 048. 901. 010.-/+ 00.-/020.+XXXXXX-3110501-015 "4/3 050.1 311. 010.-/+ 00.-/020.+XXXXXX-3315131-015 "1 513.1 331. 510.-/+ 00.-/020.+XXXXXX-4515732-015 "2 573.2 451. 510.-/+ 00.-/020.+




22

Product Overview:

Fluoropolymer spaghetti tubing is ideal for insulation sleeving applications that require high temperature resistance(withstands soldering), chemical and abrasion resistance, and UL or CSA recognition. Standard sizes are manufacturedin natural and ten colors (per MIL-STD-104). All colors require minimum run quantities. Precision cutting is availableat a minimum charge. High speed rotary equipment yields excellent cut length tolerances with clean, square ends.PTFE cut pieces can be used as spacers, insulation for wire leads, or a protective outer layer in harsh chemicalenvironments.

Spaghetti Electrical Insulation Tubing

PTFE Fractional Spaghetti Tubing

Fractional spaghetti tubing except for 1” is supplied in random length coils, with a minimum coil length of 15 feet. 1”size is supplied in 5 or 10 foot straight lengths. Custom packaging, sizes, and lengths are quoted upon request.Specifications:Standard Wall - ASTM D 3295, Class C, AMS 3653Thin Wall - ASTM D 3295, Class B, AMS 3655Light Wall - ASTM D 3295, Class A, AMS 3654

llaWdradnatS llaWnihT llaWthgiL)hcni(eziS DImoN rebmuNtraP llaWmoN rebmuNtraP llaWmoN rebmuNtraP llaWmoN gnigakcaPdradnatS

"8/1 521. 8/1SFT 020. 8/1TFT 510. 8/1LFT 800. liochtgnelmodnaR







"8/5 236. 8/5SFT 030. 8/5TFT 520. liochtgnelmodnaR

"4/3 067. 4/3SFT 530. 4/3TFT 030. liochtgnelmodnaR

"8/7 588. 8/7SFT 530. liochtgnelmodnaR

"1 010.1 001SFT 530. htgneL'01&'5thgiartS



23

Spaghetti Electrical Insulation Tubing

Spaghetti tubing is supplied in random lengths with a minimum length of 25 feet. Continuous lengths and colorsquoted upon request. AWG spaghetti tubing is also available in FEP and PFA. Consult factory for pricing and mini-mum lengths.Specifications:Heavy Wall - ASTM D 3295, Class EStandard Wall - ASTM D 3295, Class C, AMS 3653, MIL-I-22129, UL-224 600V 200°C, CSA 9032-01 600VThin Wall - ASTM D 3295, Class B, AMS 3655, UL-224 300V 200°C, CSA 9032-01 300VLight Wall - ASTM D 3295, Class A, AMS 3654, UL-224 150V 200°C

PTFE AWG Spaghetti Tubing

)GWA(eziS DImoN DIniM DIxaM

llaWyvaeH llaWdnatS llaWnihT llaWthgiL dradnatSgnigakcaPoNtraP llaWmoN oNtraP llaWmoN oNtraP llaWmoN oNtraP llaWmoN

23 010. 23TFT 200.±700. 23LFT 200.±500. loops.tf000,1

03 210. 010. 510. 03SFT 200.±900. 03TFT 900. 200.± 03LFT 200.±600. loops.tf000,1



42 220. 020. 620. 42HFT 300.±610. 42SFT 300.±210. 42TFT 010. 300.± 42LFT 200.±600. loops.tf000,1








61 350. 150. 160. 61HFT 400.±020. 61SFT 300.±610. 61TFT 210. 300.± 61LFT 200.±600. 1, loops.tf000

51 950. 750. 760. 51HFT 400.±020. 51SFT 300.±610. 51TFT 210. 300.± 51LFT 200.±800. 1, loops.tf000

41 660. 460. 470. 41HFT 400.±020. 41SFT 300.±610. 41TFT 210. 300.± 41LFT 200.±800. loops.tf005






8 331. 921. 141. 8HFT 500.±030. 8SFT 400.±020. 8TFT 510. 300.± 8LFT 200.±800. liochtgnelmodnaR




4 802. 402. 422. 4SFT 400.±020. 4TFT 510. 300.± 4LFT 300.±010. liochtgnelmodnaR







24

Heat Shrink Electrical Insulation Tubing

Product Overview:

Fluoropolymer heat shrink products are excellent in corrosive environments. They are abrasive and shock resistant,flexible, and non-flammable. PTFE will withstand long term exposure to temperatures in excess of 500°F. PTFE heatshrink tubing is available in a 2:1 ratio, while FEP is available in a 1:3:1 ratio. Both products meet the industrystandard MIL-I-23053B specification.

PTFE Fractional Heat Shrink Tubing (2:1), Industrial Wall

)hcni(eziS *cepSLIM rebmuNtraPmuminiM

DIdednapxEmumixaM

DIderevoceRlanimoN

llaWderevoceRecnareloTllaW

derevoceR

Heat shrink tubing is available in stock packaging of 4 ft. straight lengths. 24 ft. is the minimum item quantity sold.Custom packaging, sizes, lengths, and colors are quoted upon request.*Specification: MIL-DTL-23053/12

PTFE Fractional Heat Shrink Tubing (2:1)

Heat shrink tubing is available in stock packaging of 4 ft. straight lengths. 24 ft. is the minimum item quantity sold.Custom packaging, sizes, lengths, and colors are quoted upon request.*Specification:Standard Wall - MIL-DTL-23053/12, Class 2Thin Wall - MIL-DTL-23053/12, Class 3Light Wall - MIL-DTL-23053/12, Class 4

eziS)GWA(

niMdednapxE

DI

xaMderevoceR

DI

llaWdradnatS llaWnihT llaWthgiL

LIM*cepS

traPrebmuN

moNvoceRllaW

LIM*cepS

traPrebmuN

moNvoceRllaW

LIM*cepS

traPrebmuN

moNvoceRllaW

"8/1 101- 8/1IFT2SH 661. 031. 030. 500.±

"61/3 201- 61/3IFT2SH 052. 391. 030. 500.±

"4/1 301- 4/1IFT2SH 333. 752. 030. 500.±

"61/5 401- 61/5IFT2SH 514. 023. 030. 500.±

"8/3 501- 8/3IFT2SH 894. 383. 030. 500.±

"61/7 601- 61/7IFT2SH 085. 844. 030. 600.±

"2/1 701- 2/1IFT2SH 666. 015. 030. 600.±

"61/9 801- 61/9IFT2SH 847. 275. 030. 600.±

"8/5 901- 8/5IFT2SH 038. 736. 030. 600.±

"61/11 011- 61/11IFT2SH 519. 007. 230. 600.±

"4/3 111- 4/3IFT2SH 000.1 467. 040. 700.±

"8/7 211- 8/7IFT2SH 071.1 198. 540. 700.±

"1 311- 00.1IFT2SH 033.1 020.1 050. 800.±

"8/1 512. 031. 512- 8/1SFT2SH 400.±020. 913- 8/1TFT2SH 400.±510. 514- 8/1LFT2SH 300.±010.



"8/3 065. 993. 822- 8/3SFT2SH 600.±520. 8/3TFT2SH 400.±510.

"61/7 556. 264. 922- 61/7SFT2SH 600.±520. 61/7TFT2SH 400.±810.

"2/1 057. 425. 032- 2/1SFT2SH 600.±520. 2/1TFT2SH 400.±810.

"8/5 039. 556. 132- 8/5SFT2SH 600.±030. 8/5TFT2SH 400.±020.

"4/3 521.1 687. 232- 4/3SFT2SH 800.±530. 4/3TFT2SH 400.±520.

"8/7 031.1 119. 332- 8/7FT2SH 800.±530. 8/7TFT2SH 400.±520.

"1 005.1 630.1 432- 00.1SFT2SH 800.±530. 00.1TFT2SH 400.±520.



25


PTFE AWG Heat Shrink Tubing (2:1)

Heat shrink tubing is available in stock packaging of 4 ft. straight lengths. 100 ft. is the minimum item quantity sold.Custom packaging, sizes, lengths, and colors are quoted upon request.*Specification:Standard Wall - MIL-DTL-23053/12, Class 2Thin Wall - MIL-DTL-23053/12, Class 3Light Wall - MIL-DTL-23053/12, Class 4

eziS)GWA(

niMdednapxE

DI

xaMderevoceR

DI

llaWdradnatS llaWnihT llaWthgiL

LIM*cepS

traPrebmuN

moNvoceRllaW

LIM*cepS

traPrebmuN

moNvoceRllaW

LIM*cepS

traPrebmuN

moNvoceRllaW

03 730. 510. 03SFT2SH 200.±900. 103- 03TFT2SH 200.±900. 03LFT2SH 200.±600.



42 550. 720. 102- 42SFT2SH 200.±210. 403- 42TFT2SH 300.±010. 104- 42LFT2SH 200.±600.






61 201. 160. 61SFT2SH 300.±610. 013- 61TFT2SH 300.±210. 704- 61LFT2SH 200.±600.

51 121. 760. 702- 51SFT2SH 300.±610. 113- 51FT2SH 300.±210. 804- 51LFT2SH 200.±600.


















26


FEP Fractional Heat Shrink Tubing (1.3:1)

Heat shrink tubing is supplied in 4 ft. straight lengths. 24 ft. is the minimum item quantity sold. Custom packaging,sizes, lengths, and colors are quoted upon request.*Specification: MIL-DTL-23053/11C, Class1


DIdednapxEmumixaM

DIderevoceRlanimoN


derevoceR

"8/3 911- 8/3PEF3.1SH 005. 383. 510. 400.±

"61/7 021- EF3.1SH 61/7P 085. 844. 020. 400.±

"2/1 121- PEF3.1SH 2/1 666. 015. 020. 400.±

"8/5 221- PEF3.1SH 8/5 038. 736. 520. 400.±

"4/3 321- PEF3.1SH 4/3 000.1 467. 030. 400.±

"8/7 421- PEF3.1SH 8/7 071.1 198. 530. 400.±

"1 621- PEF3.1SH 00.1 033.1 020.1 530. 400.±

FEP AWG Heat Shrink Tubing (1.3:1)

Heat shrink tubing is supplied in 4 ft. straight lengths. 100 ft. is the minimum item quantity sold. Custom packaging,sizes, lengths, and colors are quoted upon request.*Specification: MIL-DTL-23053/11C, Class1


DIdednapxEmumixaM

DIderevoceRlanimoN


derevoceR

42 101- 42PEF3.1SH 130. 720. 800. 200.±

22 201- 22PEF3.1SH 630. 230. 800. 200.±

02 301- 02PEF3.1SH 540. 930. 800. 200.±

81 401- 81PEF3.1SH 060. 940. 800. 200.±

61 501- 61PEF3.1SH 570. 160. 900. 200.±

41 601- 41PEF3.1SH 290. 270. 900. 200.±

21 701- 21PEF3.1SH 511. 980. 900. 200.±

01 801- 01PEF3.1SH 141. 211. 010. 300.±

9 901- 9PEF3.1SH 851. 421. 010. 300.±

8 011- 8PEF3.1SH 081. 341. 010. 300.±

7 111- 7PEF3.1SH 791. 851. 110. 400.±

6 211- 6PEF3.1SH 522. 081. 110. 400.±

5 311- 5PEF3.1SH 842. 891. 110. 400.±

4 411- 4PEF3.1SH 092. 622. 110. 400.±

3 511- 3PEF3.1SH 013. 942. 110. 400.±

2 611- 2PEF3.1SH 563. 082. 210. 400.±

1 711- 1PEF3.1SH 004. 113. 210. 400.±

0 811- 0PEF3.1SH 044. 943. 210. 400.±



27

Spiral Cut Cable Wrap Electrical Insulation Tubing

PTFE Spiral Cut Cable Wrap

Spiral cut cable wrap is supplied in non-continuous spools. Drawing above depicts a left hand spiral cut. Product isavailable in left or right hand cut. Please specify with proper suffix at end of part number. 100 ft. is the minimum itemquantity sold. Custom packaging, sizes, and colors are available upon request. Spiral cut cable wrap is also quotedin FEP and ETFE upon request.Specification: MIL-T-47287A, Type 1

Product Overview:

Fluoropolymer spiral cut cable wrap provides harnessing for wires and cable while allowing for leads at variouspoints. Ideal applications include cable harnessing, wiring closets, station wiring, fibre optic cabling, aerospace andautomotive end uses. This product has a “VO” flammability rating and is excellent for bundling cables in plenumareas. It is also durable, flexible and has outstanding electrical properties. Spiral wrap is offered in both left and righthand cut, and natural/ten colors, which allows for color coding and indentification.

rebmuNtraPDOeziS

"A"DO

ecnareloTllaW

"B"llaW

ecnareloThctiP"D"

hctiPecnareloT

eldnuBxaM"C"DO

XXXXXX-0205210-104 521. 500.± 020. 800.± 212. 510.± "2/1

XXXXXX-0308810-104 881. 500.± 030. 800.± 213. 510.± "1

XXXXXX-0300520-104 052. 500.± 030. 800.± 573. 510.± "2

XXXXXX-0305730-104 573. 500.± 030. 800.± 734. 510.± "2/1-2

XXXXXX-0300050-104 005. 600.± 030. 800.± 265. 510.± "3

XXXXXX-0300570-104 057. 700.± 230. 800.± 578. 510.± "4

XXXXXX-0400001-104 00.1 010.± 040. 800.± 000.1 510.± "6

TOP/ SECTION CUT

B

CA

D

DEPICTS LEFT HAND CUT



28

Round Beading/Miniature Rod Electrical Insulation Tubing

Product Overview:

PTFE round beading/miniature rod is excellent as a filler in loose bundles of cables, as a pull cord, as o-ring seals, asa bonding agent (when melted), or cut into pieces as bearings and spacers. The smoother finish, greater flexibility,and longer lengths outperform “granular” extrusions.

PTFE Round Beading/Miniature Rod

Round beading/miniature rod is supplied in non-continuous spool lengths as noted above. Custom packaging, sizes,and colors are quoted upon request.ASTM D1710, Type 1, Grade 1, Class B

rebmuNtraP retemaiD ecnareloT gnigakcaPdradnatS

510BFT 510. 200.± loops.tf000,1

020BFT 020. 200.± loops.tf000,1

520BFT 520. 200.± loops.tf000,1

820BFT 820. 200.± loops.tf000,1

130BFT 130. 200.± loops.tf000,1

530BFT 530. 200.± loops.tf000,1

930BFT 930. 200.± loops.tf000,1

340BFT 340. 200.± loops.tf000,1

740BFT 740. 200.± loops.tf000,1

050BFT 050. 200.± loops.tf000,1

550BFT 550. 300.± loops.tf000,1

060BFT 060. 300.± loops.tf000,1

260BFT 260. 300.± loops.tf000,1

070BFT 070. 300.± loops.tf000,1

270BFT 270. 300.± loops.tf000,1

870BFT 870. 400.± loops.tf005

080BFT 080. 400.± loops.tf005

480BFT 480. 400.± loops.tf005

090BFT 090. 400.± loops.tf005

490BFT 490. 400.± loops.tf005

001BFT 001. 400.± loops.tf005

901BFT 901. 400.± loops.tf005

511BFT 511. 400.± loops.tf005

521BFT 521. 400.± loops.tf005

051BFT 051. 400.± loops.tf005

881BFT 881. 400.± liochtgnelmodnaR



29

Electrical Insulation Tubing

Product Overview:

PTFE convoluted tubing allows for insulation of wire bundles where sharp bends are required. Convoluted tubing isavailable in natural/ten colors and with cuffed ends to provide a sealed environment.

PTFE Convoluted Tubing

Convoluted tubing is made to order. Custom packaging, sizes, and colors are quoted upon request. Additional charg-es may apply for custom cuffs. Stock packaging is random coils.Specifications: MIL-T-81914/1; additional sizes including /2, Class 1 & 2 also available

FEP Convoluted Tubing

Convoluted tubing is used in applications where smaller bend diameters are required. Convoluted tubing is made toorder. Custom sizes, colors, packaging, PTFE liners, and PFA and ETFE convoluted tubing are quoted upon request.*Specifications: MIL-T-81914/3; also available to meet /4

CE

DBA

BA

Convoluted

rebmuNtraP "B"DIX"A"DO "C"llaW "D"DOffuC "E"htgneLffuC suidaRdneB hctiP

rebmuNtraP *cepSLIM "B"DIX"A"DO DIlanimoN llaWlanimoN hctiP

-103 3200230 XXXXXX- 181.X023. 320. 082. 4/3 " "2/1 8

-103 7200540 XXXXXX- 4. 05 .X 303 720. . 514 1" "8/7 7

3 -10 7200950 XXXXXX- . 095 .X 524 720. . 045 1" "4/1-1 6

-103 9200660 XXXXXX- . 066 .X 584 920. . 376 4/1-1 " "2/1-1 6

-103 5300870 XXXXXX- . 087 .X 806 530. . 008 2/1-1 " "4/3-1 6

-103 5300011 XXXXXX- 001.1 .X 058 530. 060.1 2" "4/1-2 2/1-4

3 -10 5300931 XXXXXX- 093.1 X 501.1 530. 013.1 2 2/1- " "4/3-2 4

-103 5309351 XXXXXX- 935.1 X 012.1 530. 065.1 "2/1-2 "3 4

3 -10 0400012 XXXXXX- 2 X001. 096.1 040. 080.2 2/1-2 " "3 4

03 3- 8100230 XXXXXX- 10- 023. X 181. 481. 810. 8

XXXXXX-8104140-303 20- 372.X414. 772. 810. 8

03 3- 8100540 XXXXXX- 30- 054. X 603. 903. 810. 8

303- 8100150 XXXXXX- 40- 015. X 463. 073. 810. 8

03 3- 8101750 XXXXXX- 50- 175. X 724. 234. 810. 8

XXXXXX-3200560-303 60- 584.X056. 394. 320. 7

XXXXXX-3200770-303 70- 806.X077. 716. 320. 7

XXXXXX-3200390-303 80- 037.X039. 047. 320. 6

XXXXXX-3203701-303 90- 068.X370.1 868. 320. 5

XXXXXX-3206221-303 01- 579.X622.1 889. 320. 5

XXXXXX-3200931-303 11- 501.1X093.1 511.1 320. 5

XXXXXX-3209351-303 21- 012.1X935.1 032.1 320. 4

XXXXXX-3202381-303 31- 734.1X238.1 964.1 320. 4

XXXXXX-3202802-303 41- 886.1X280.2 917.1 320. 4

XXXXXX-3202332-303 51- 739.1X233.2 969.1 320. 4



30

Offer of Sale

1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.

9/91-P

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.


��

To be a leading worldwide manufacturer of compo-nents and systems for the builders and users of durablegoods. More specifically, we will design, market andmanufacture products controlling motion, flow and pres-sure. We will achieve profitable growth through premiercustomer service.

��

North American customers seeking product information,the location of a nearby distributor, or repair serviceswill receive prompt attention by calling the ParkerProduct Information Center at our toll-freenumber: 1-800-C-PARKER (1-800-272-7537). InEurope, call 00800-C-PARKER-H (00800-2727-5374).

The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.

The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-draulic components and sys-tems to builders and users ofindustrial and mobile machin-ery andequipment.

The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.

The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.

The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.

The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.

��

Parker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice. A Fortune 500 corporation listed on the NewYork Stock Exchange (PH), our components and sys-tems comprise over 1,400 product lines that controlmotion in some 1,000 industrial and aerospace mar-kets. Parker is the only manufacturer to offer itscustomers a choice of hydraulic, pneumatic, andelectromechanical motion-control solutions. Our Com-pany has the largest distribution network in its field,with over 7,500 distributors serving nearly 400,000 cus-tomers worldwide.

Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com

Parker Hannifin Corporation

The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomerservice.

The Climate & IndustrialControls Group designs,manufactures and marketssystem-control and fluid-han-dling components and sys-tems to refrigeration, air-con-ditioning and industrial cus-tomers worldwide.


Parker Hannifin CorporationParflex/Atlantic200 Ram Ridge RoadChestnut Ridge, NY 10977 USATel: (845) 735-8800Fax: (845) 735-8810Web site: http://www.parker.com/parflex

Catalog 4150, 10M03/03 rev 9/03


Documents

Parflex/Atlantic Fluoropolymer Tubing Productsparkerstorethailand.com/PDF/PFA_PTFE/4150_A00.pdf · Parker Hannifin Corporation Parflex/Atlantic Chestnut Ridge, NY 6 Heavy Wall Fractional