Pebbletex Adhered Mat Design - BASF

Pebbletex Adhered Mat DesignTypical Details

(THIS PAGE INTENTIONALLY LEFT BLANK)

1. Pebbletex Adhered Mat Design Application (Plan VIew)

2. Pebbletex Adhered Mat Design (Isometric View)

3. Aesthetic Groove

4. Insulation Boards / Reinforcing Mesh Application at Openings

5. Window Head (Flush)

6. Window Head (Recessed)

7. Window Jamb Detail (Flush)

8. Window Jamb Detail (Recessed)

9. Window Sill Detail (Flush)

10. Window Sill Detail (Recessed)

11. Roof Edge Flashing Detail

12. Metal Coping Detail

13. Parapet Cap Detail

14. Expansion Joint Detail at Floorline

15. Expansion Joint at Change in Substrate

16. Section at Fascia/Soffit

17. Expansion Joint Detail

18. Pipe Penetration

19. Corner Mesh Application with STRONG 15 or HI-IMPACT 20 (Plan View)

20. Corner Mesh Application with Standard Mesh, INTERMEDIATE 6 or 12 (Plan View)

21. Light Fixture

22. Termination at Foundation

23. Termination at Foundation (Flush)

24. Kick-out Flashing Detail

Pebbletex Adhered Mat Design

TABLE OF CONTENTS

0616

Pebbletex® Adhered Mat Design

AM-01 TYPICAL PEBBLETEX ADHERED MAT DESIGN APPLICATION (PLAN VIEW)

AM-02 TYPICAL PEBBLETEX ADHERED MAT DESIGN (ISOMETRIC VIEW)

ACCEPTABLE SHEATHING

PERMALATH 1000 OR METAL LATH

FINESTONE INSULATION BOARD

FRAMING

FINESTONE REINFORCING MESH

FINESTONE BASE COAT

FINESTONE FINISH COAT

MECHANICAL FASTENER



FRAMING

FINESTONE BASE COAT

FINESTONE LAMINA:• FINESTONE BASE COAT• FINESTONE REINFORCING MESH• FINESTONE FINISH COAT


MECHANICAL FASTENER

FINESTONE BASE COAT

SELF-ADHERING MESH TAPE (4”), 4” SHEATHING FABRIC OR BASF WS FLASH

FINESTOP®, FINESTOP RA OR SECONDARY MOISTURE PROTECTION BARRIER

FINESTOP®, FINESTOP RA OR SECOND-ARY MOISTURE PROTECTION BARRIER

0616

AM-03 TYPICAL AESTHETIC GROOVE (PLAN VIEW)

AM-04 TYPICAL INSULATION BOARDS/REINFORCING MESH APPLICATION AT OPENINGS

WRAP FINESTONE BASE COAT ANDSTANDARD MESH REINFORCING MESH AT INSULATION BOARD EDGES


STAGGER INSULATION BOARDJOINTS AT CORNER OF OPENINGS

STANDARD MESH REINFORCING MESH EMBEDDED IN FINESTONE BASE COAT

NOTE: • TYPICAL AT WINDOWS, DOORS, ETC.• MAINTAIN A MIN. 13 mm (1/2”) PERIMETER SEALANT JOINT• FLASHINGS ARE BY OTHERS AND SHALL BE AS PER DESIGN/CODE REQUIREMENTS

229 mm (9”)

305 mm (12”)




FRAMING

AESTHETIC GROOVE

MIN. 19 mm (3/4”)


FINESTONE BASE COAT


MECHANICAL FASTENER

0616


AM-05 TYPICAL WINDOW HEAD (FLUSH)

AM-06 TYPICAL WINDOW HEAD (RECESSED)


BACKER ROD AND SEALANT

BASF COLOR COAT

FRAMING

WINDOW





FRAMING

WINDOW

FLASHING W/ SEALANT

FINESTONE BASE COAT


MECHANICAL FASTENER


NOTE: IF SECONDARY MOISTURE PROTECTION BARRIER IS USED IN LIEU OF FINESTOP OR FINESTOP RA, ENSURE BARRIER IS PROPERLY LAPPED OVER THE FLASHING FLANGE.



FINESTONE BASE COAT


MECHANICAL FASTENER


WRAP BASE COAT AND FINESTONE REINFORCING MESH

0616

AM-07 TYPICAL WINDOW JAMB DETAIL (FLUSH)

AM-08 TYPICAL WINDOW JAMB DETAIL (RECESSED)



FINESTONE BASE COAT


BASF COLOR COAT


SEE ALTERNATE OPTION DETAIL

FINESTOP® FINESTOP RA OR SECONDARY MOISTURE PROTECTION BARRIER

FRAMING

MECHANICAL FASTENER

SELF-ADHERING MESH TAPE (9”) EMBEDDED IN FINESTOP OR 9” SHEATHING FABRIC EMBEDDED IN FINESTOP RA

WINDOW



FINESTONE BASE COAT



FRAMING

MECHANICAL FASTENER


WINDOW




BASF COLOR COAT

BASF WS FLASH

FINESTOP OR FINESTOP RA

ALTERNATE OPENING PROTECTION OPTION FOR WINDOW JAMBS (WS FLASH MAY BE APPLIED UNDER OR OVER THE FINESTOP OR FINESTOP RA).


WRAP BASE COAT AND FINESTONE REINFORCING MESHALTERNATE OPENING

PROTECTION OPTION FOR WINDOW JAMBS (WS FLASH MAY BE APPLIED UNDER OR OVER THE FINESTOP OR FINESTOP RA).

WS FLASH


0616


AM-09 TYPICAL SILL DETAIL (FLUSH)

AM-10 TYPICAL SILL DETAIL (RECESSED)



FINESTONE INSULATION BOARDFINESTONE BASE COAT

BACKER ROD AND SEALANTFINESTONE ASAP


BASF WS FLASH



FRAMING

MECHANICAL FASTENER


WINDOW



ALTERNATE OPENING PROTECTION OPTION FOR WINDOW SILL (WS FLASH MAY BE APPLIED UNDER OR OVER THE FINESTOP OR FINESTOP RA).



FINESTONE INSULATION BOARDFINESTONE BASE COAT

PAN FLASHING


BASFF WS FLASH



FRAMING

MECHANICAL FASTENER


WINDOW



ALTERNATE OPENING PROTECTION OPTION FOR WINDOW SILL (WS FLASH MAY BE APPLIED UNDER OR OVER THE FINESTOP OR FINESTOP RA).

SEALANT

NOTE: • EXTEND FLASHING MIN. 50 mm (2”) OVER EIFS• FLASHINGS ARE BY OTHERS AND SHALL BE AS PER DESIGN/CODE REQUIREMENTS

0616

AM-12 TYPICAL METAL COPING DETAIL

METAL COPING

AM-11 TYPICAL ROOF EDGE FLASHING DETAIL


FRAMING


FINESTONE BASE COAT

SEALANT

ROOF SYSTEM

ROOF EDGE FLASHING



MIN. 50 mm (2”)

MIN. 50 mm (2”)

ROOF SYSTEM


MECHANICAL FASTENER




FINESTONE BASE COAT

SEALANT



MECHANICAL FASTENER



FRAMING

0616


AM-13 TYPICAL PARAPET CAP DETAIL

AM-14 TYPICAL EXPANSION JOINT DETAIL AT FLOORLINE


FRAMING


FLOOR SLAB

MIN. 19 mm (3/4”)

MIN. 25 mm (1”)

SEALANT

FINESTONE BASE COAT


ROOF SYSTEM

12

6

MIN. 203 mm

(8” )


SLIP TRACK

BASF WS FLASH

FLASHING



FINESTONE BASE COAT



MECHANICAL FASTENER


FRAMING



EPS CAP

NOTE: FLASHINGS ARE BY OTHERS AND SHALL BE AS PER DESIGN/CODE REQUIREMENTS




BASF COLOR COAT

WIDTH PER DESIGN

0616

AM-15 TYPICAL EXPANSION JOINT AT CHANGE IN SUBSTRATE

AM-16 TYPICAL SECTION AT FASCIA/SOFFIT


FRAMING





BASF COLOR COAT

NOTE: JOINT WIDTH PER DESIGN

PEBBLETEX CLASSIC PB SYSTEM


FINESTONE BASE COAT


FINESTONE BASE COAT

BASF WS FLASH




ACCEPTABLE SUBSTRATE




NOTE: EXTEND FINESTOP OR FINESTOP RA A MIN. OF 102 MM (4”) ONTO SOFFIT. USE APPROPRIATE REINFORCEMENT AT CORNER.

0616


AM-17 TYPICAL EXPANSION JOINT DETAIL

AM-18 TYPICAL PIPE PENETRATION


FRAMING


SEALANT AT PERIMETER OF PENETRATION


BASF COLOR COAT

MIN. 13 mm (1/2”)


FRAMING


BASF WS FLASH

FINESTONE BASE COAT

BACKER ROD AND SEALANTWIDTH PER DESIGN


BASF COLOR COAT

FINESTONE BASE COAT



FINESTONE LAMINA:• FINESTONE BASE COAT• FINESTONE REINFORCING • MESH• FINESTONE FINISH COAT


FINESTOP®, FINESTOP RA OR SEC-ONDARY MOISTURE PROTECTION BARRIER



0616

AM-19 TYPICAL CORNER MESH APPLICATION WITH STRONG 15 OR HI-IMPACT 20 (PLAN VIEW)

AM-20 TYPICAL CORNER MESH APPLICATION WITH STANDARD MESH, INTERMEDIATE 6 OR 12 (PLAN VIEW)

ACCEPTABLE SHEATHINGFRAMING

FINESTONE BASE COAT

CORNER MESH EMBEDDED IN BASE COAT

STANDARD MESH REINFORCING MESH OR INTERMEDIATE 6 EMBEDDED IN FINESTONE BASE COAT

STRONG 15 OR HI-IMPACT 20 EMBEDDED IN FINESTONE BASE COAT

FINESTONE INSULATION BOARDPERMALATH 1000 OR METAL LATH



NOTE: • BUTT EDGE OF STRONG 15 OR HI-IMPACT 20 TO CORNER MESH• A CONTINUOUS OVERLAY OF STANDARD MESH OR INTERMEDIATE 6 IS REQUIRED OVER STRONG 15, HI-IMPACT 20 OR CORNER MESH.

ACCEPTABLE SHEATHINGFRAMING

FINESTONE BASE COAT

CORNER MESH EMBEDDED IN BASE COAT

STANDARD MESH REINFORCING MESH OR INTERMEDIATE 6 EMBEDDED IN FINESTONE BASE COAT





NOTE: A CONTINUOUS OVERLAY OF STANDARD MESH OR INTERMEDIATE 6 OR 12 IS REQUIRED OVER CORNER MESH.



0616


AM-21 TYPICAL LIGHT FIXTURE

AM-22 TYPICAL TERMINATION AT FOUNDATION


FRAMING

FOUNDATION

FLASHING

FINESTONE BASE COAT



FRAMING

WIRE OPENING

FINESTONE BASE COAT

SET FLANGE IN SEALANT

SMALL LIGHT FIXTURE



SEALANT


FINESTOPTM, FINESTOP RA OR SECONDARY MOISTURE PROTECTION BARRIER







NOTE: • IF SECONDARY MOISTURE PROTECTION BARRIER IS

USED IN LIEU OF FINESTOP OR FINESTOP RA, ENSURE BARRIER IS PROPERLY LAPPED OVER THE FLASHING FLANGE.

• TERMINATE PEBBLETEX ADHERED MAT DESIGN SYSTEM MIN. 203 mm (8”) ABOVE GRADE.

MIN. 50 mm (2”)MAX. 305 mm (12”)

0616

AM-23 TYPICAL TERMINATION AT FOUNDATION (FLUSH)


FRAMING

FOUNDATION



BACKER ROD, SEALANTAND WEEP TUBE

BASF COLOR COATMIN. 25 mm (1”)

FINESTONE BASE COAT

BASF WS FLASH

AM-24 TYPICAL KICK-OUT FLASHING DETAIL


PEBBLETEX ADHERED MAT DESIGN

STEP FLASHING


ROOF SHINGLES

BUILDING PAPER

DRIP EDGE

KICK-OUT FLASHING

MIN. 100 mm (4”)

MIN. 50 mm (2”)






NOTE: • KICK-OUT FLASHING MUST BE ANGLED 100˚ MIN.TO ALLOW FOR PROPER DRAINAGE.• KICK-OUT FLASHING SEAMS MUST BE SOLDERED OR SEALED WITH APPROPRIATE SEALANT.• TERMINATE PEBBLETEX ADHERED MAT DESIGN MIN. 50 mm (2”) ABOVE ROOF.

BASF Corporation - Wall Systems | 3550 St Johns Bluff Rd South Jacksonville, Florida 32224 P: 800.221.9255 F: 904.996.6300 www.finestone.basf.com© 2016 BASF Corporation rev 160622

For the most current version of this literature, please visit our website at www.finestone.basf.com.


Documents

Pebbletex Adhered Mat Design - BASF