PHD Plastic Packaging Solutions

Plastic Packaging SolutionsInjection • Stretch • Extrusion • Blow Molding • Filling • Packaging

PPCIB10

Increase Production • Reduce Maintenance • Reduce Downtime • Reduce Scrap Bottles

�1 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m

Depalletizer - Holds slip sheet whilecontainers are being removed.

Recommended Units:GRM ClampsSAL Slides

��

��

��

��

�

�

�

�

�

�

�

�

��

��

��

��

��

��

Soft Drop to Gaylord - PHD Slides canbe used to lower bucket of preforms togaylord and PHD Cylinder or Rotary canbe used to rotate bucket to unloadpreforms.

Recommended Units:SD/SE SlidesRL Rotary Actuators

Descramble - PHD Actuators,Rotaries can be used to correctorientation of preforms. Cylindersand slides can be used in severalapplications

Recommended Units:SD/SE Slides1-8000 Rotary ActuatorsRIS Rotary ActuatorsTom Thumb® Cylinders

Stretch Blow Mold - PHD StretchRod Cylinders, Transfer Arms,Eject Slide, and Nozzle Cylinders

Recommended Units:BCS, BCZ, BST (See PPC Binder)

Descramble - PHD Actuators, rotaries can beused to correct orientation of bottles. Cylindersand slides can be used in several applications


Air-Veyor - Rail adjustmentto adjust air-veyor railsfor different size bottles.

Recommended Units:CV CylindersTom Thumb® Cylinders

Case Erect - PHD Actuators,Cylinders, Slides and Rotariesare used to form cartons.

Recommended Units:SD/SE and SxH/SxL Slides,CV and Tom Thumb®

Cylinders, 1-8000, RA, andRI Rotary Actuators

Package - PHD Actuators,Cylinders, Slides and Rotariesare used to fill cases.


Cylinders, 1-8000, RA, andRI Rotary Actuators.

Stretch Wrap - PHD Rotariesare used to rotate turn table

Recommended Units:SD/SE and SxH/SxL Slides, CVand Tom Thumb® Cylinders, 1-8000,RA, and RI Rotary Actuators, andML 304693 (Zecchetti Replacement)

Palletize - Here slides areused to divert boxes tobuild pallet layers andGrippers are used to squarelayers on the pallet.

Recommended Units:SD/SE and SFP SlidesGRR Grippers

Eject/Divert - PHD EjectSlide or replacement valveand cylinder.

Recommended Units:CV Cylinder with valveML309590 (Eject Slide)

��

��

��

��

��

��

��

��

��

ML307794

Specific to Keg Post-Fill Applications

Inverting -PHD Cylinders areused to orient kegs up forpalletizing.

Recommended Units:CV Cylinder

Diverting - PHD Rotaries areused to control diverter armmounted to conveyor.

Recommended Units:RAS150 Rotary Actuators

cylinder pivots sectionto stand keg upright

rejectconveyor

load cellto verifyweight

bearing block

stop block supports diverter

acceptedproductflow

��

��

��

��

��

��

��

Shrink Pack - PHD Actuators, Cylinders,Slides, and Rotaries are used to wrapcarton.

Recommended Units:SD/SE and SxH/SxL Slides, CV and TomThumb® Cylinders, 1-8000, RA, and RL

��

��

Fill - Fill Cylinders, valve openingcylinders, volumetric pumps,eject slides,

Recommended Units:Filler CylindersML309348 (2 Position)ML302807 (Volumetric Pump)Filler Cam Engagement SlideReplacement Cam Follower Wheels

��

Labeling - PHDrotary actuatorsprovide a smoothand backlash-freepositioning forlabel applications

RecommendedUnit:RA Rotaries

��

��

Injection Mold Preforms - PHD Slidesfor gantry

Recommended Units:SFP, SD/SE and SAL/SAH Slides

��

Anywhere in the plant,we have the solution for your operation

maximize productivity

Find our productivity enhancing solutions to these processes on pages 5 through 7.

1 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m �

Depalletizer - Holds slip sheet whilecontainers are being removed.

Recommended Units:GRM ClampsSAL Slides

��

��

��

��

�

�

�

�

�

�

�

�

��

��

��

��

��

��

Soft Drop to Gaylord - PHD Slides canbe used to lower bucket of preforms togaylord and PHD Cylinder or Rotary canbe used to rotate bucket to unloadpreforms.

Recommended Units:SD/SE SlidesRL Rotary Actuators

Descramble - PHD Actuators,Rotaries can be used to correctorientation of preforms. Cylindersand slides can be used in severalapplications


Stretch Blow Mold - PHD StretchRod Cylinders, Transfer Arms,Eject Slide, and Nozzle Cylinders

Recommended Units:BCS, BCZ, BST (See PPC Binder)

Descramble - PHD Actuators, rotaries can beused to correct orientation of bottles. Cylindersand slides can be used in several applications


Air-Veyor - Rail adjustmentto adjust air-veyor railsfor different size bottles.

Recommended Units:CV CylindersTom Thumb® Cylinders

Case Erect - PHD Actuators,Cylinders, Slides and Rotariesare used to form cartons.


Cylinders, 1-8000, RA, andRI Rotary Actuators

Package - PHD Actuators,Cylinders, Slides and Rotariesare used to fill cases.


Cylinders, 1-8000, RA, andRI Rotary Actuators.

Stretch Wrap - PHD Rotariesare used to rotate turn table

Recommended Units:SD/SE and SxH/SxL Slides, CVand Tom Thumb® Cylinders, 1-8000,RA, and RI Rotary Actuators, andML 304693 (Zecchetti Replacement)

Palletize - Here slides areused to divert boxes tobuild pallet layers andGrippers are used to squarelayers on the pallet.

Recommended Units:SD/SE and SFP SlidesGRR Grippers

Eject/Divert - PHD EjectSlide or replacement valveand cylinder.

Recommended Units:CV Cylinder with valveML309590 (Eject Slide)

��

��

��

��

��

��

��

��

��

ML307794

Specific to Keg Post-Fill Applications

Inverting -PHD Cylinders areused to orient kegs up forpalletizing.

Recommended Units:CV Cylinder

Diverting - PHD Rotaries areused to control diverter armmounted to conveyor.

Recommended Units:RAS150 Rotary Actuators

cylinder pivots sectionto stand keg upright

rejectconveyor

load cellto verifyweight

bearing block

stop block supports diverter

acceptedproductflow

��

��

��

��

��

��

��

Shrink Pack - PHD Actuators, Cylinders,Slides, and Rotaries are used to wrapcarton.

Recommended Units:SD/SE and SxH/SxL Slides, CV and TomThumb® Cylinders, 1-8000, RA, and RL

��

��

Fill - Fill Cylinders, valve openingcylinders, volumetric pumps,eject slides,

Recommended Units:Filler CylindersML309348 (2 Position)ML302807 (Volumetric Pump)Filler Cam Engagement SlideReplacement Cam Follower Wheels

��

Labeling - PHDrotary actuatorsprovide a smoothand backlash-freepositioning forlabel applications

RecommendedUnit:RA Rotaries

��

��

Injection Mold Preforms - PHD Slidesfor gantry

Recommended Units:SFP, SD/SE and SAL/SAH Slides

��

1 - 8 0 0 - 6 2 4 - 8 5 1 1

We speak your language.

We understandyour unique automation requirements.

is focused totally on the specific needs of the plastic packaging industry —We speak your language. We have standard component stretch rods, nozzle and needle cylinders, fillers, transfer arms and a variety of unique solutions. PHD PPC Components are the actuators of choice to keep your blow molding lines running while increasing productivity and reducing downtime and scrap. PHD also offers a complete line of pneumatic and hydraulic cylinders, escapements, grippers, slides, rotary actuators, clamps, multi-motion actuators, and proximity switches which can be combined or used individually to provide the motion your downstream application requires. With millions of component variations, we can help pick, place, twist, turn, lift, grip, reach, rotate, eject, and clamp what you need to increase your productivity. If an application requires a modified component, our Plastic Packaging Components team is ready to help. We welcome special requests for unique products, regardless of quantity or frequency of order. PHD and our local MDN partner will work closely with you to find a solution to your needs.

This dedicated division

Ask us how we can help your company with the greeninitiative!

w w w . p h d i n c . c o m4

CO

NT

INU

OU

S

STRETCH

(List marks of PHD which appear on promotional material) are either registered trademarks or trademarks of PHD, Inc. Any other marks or names referenced herein are either registered trademarks or trademarks of their respective owners. No association with or endorsement of any company, organization, or product is intended or should be inferred.

1 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m 5

transfer arms

nozzles

stretch rods

BCS Stretch Rod CylindersDirect replacement for Sidel® Series1 and Series2 machinesMounts into the same space and bolt patternSuperior deliveryLonger life and reduced maintenance

Series1 Nozzle Cylinder Upgrade for Mechanical NozzlePneumatic can save energy, improves production/quality and enables your machine to run lighter preforms

BCZ Nozzle CylindersDirect replacement for Sidel® Model Series2 CSD & Heat Set machinesValve manifold assembled to cylinder available as standardLonger life

Series1 Pneumatic Nozzle Cylinder (SB02-SB06)Mounts into the same space and bolt patternsLonger life, less downtimeSimplified design and maintenanceProvides energy savings with enhanced sealing technology

BST Transfer ArmsDirect replacement for Sidel® Series1 SB02 through SB040 MachinesSignificantly more rigid design than other transfer armsDesigned to operate over 20 million cycles

Replacement Stretch Rod Cylinders for Sidel® Universal MachinesLonger lifeReduces maintenance and downtimeDirect replacement

Replacement for Krones® Stretch Rod CylindersLonger lifeReduces maintenance and downtimeDirect replacement

6

We offer many direct replacementsfor your existing components!

6 6

66

6

6 6Dual Cavity Nozzle CylindersDirect replacement for Sidel® Model Series2 CSD & Heat Set machinesValve manifold assembled to cylinder available as standardLonger life

BST Transfer Arm withPreferential Head

61 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m

filler cylinders

Preform/Bottle Eject SlideDirect replacement for Series2Direct valve manifold provides quicker response with higher kinetic energy capacity

Preferential Preform/Bottle Eject SlideDirect replacement for Series2Direct valve manifold provides quicker response with higher kinetic energy capacity

Replacement Preform/Bottle Eject SlideDirect replacement for Sidel® Series1Blow mold machine can run fasterConsistent preform/bottle ejectionMinimizes stress on transfer arm jaws

Fill LineEject SlideRepeatable ejection High kinetic energy capacityUses proven PHD thruster slide technology

FCA Filler CylinderDirect replacement of competitor diaphram unitSignificantly longer lifeReduces maintenance and downtime

Replacement Filler CylinderDirectly interface on Krones® filling machinerySignificantly longer lifeHigh precision

Fill LIne Eject Cylinder/ MRO Direct ReplacementProvides rapid repeatable ejection function due to MAC valve design and PHD cylinder technologyHigh kinetic energy capacity

11

14

6

11Filler Cam Engagement SlideStainless steel shafts and tool plate make this unit corrosion resistantCounterbored tool plate mounting holes recess bolt ends, reducing overall unit length

6 6

14

eject & filler cam slides

typical filler application

11Krones® Replacement Filler CylinderDirectly interface on Krones® filling machinerySignificantly longer lifeHigh precision

11

1 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m �

For more information,request the PPC Binder and CD.

more solutions for plastic packaging

Needle CylindersDirect replacementMounts into the same space and bolt patternsProvides significantly longer life and reduces maintenance and downtimeReduces “suckback”Improves exhaust

Cut Sheet ThermoformingCylinderDirect replacementWithstands high tempsFully field-repairableSignificantly longer life and reduces downtime

RA Rotary ActuatorsFull featured rotaryHigh axial and radial bearing loads Zero backlash at ends of rotationWide variety of options and accessories

1-8000 Rotary ActuatorsHeavy dutyWide variety of options and accessories Versatile designHigh torque

RI Rotary ActuatorsHigh torqueHigh axial and radial bearing load Thru hole shaft for built-in air communication ports

RL Rotary ActuatorsLow costOEM style rotaryHigh axial and radial bearing loadHigh torque/package size

Zecchetti ReplacementIncreased rotational stabiliity and controlled velocity to reduce dropped bottlesPHD Rotary mounts into same space and bolt pattern Direct replacement for Rotomation Model A42-100-TC-D11-3C1, 3-3a-1/4-2

Slip Sheet PullerStandard PHD GRM Clamp and SAL Slide technologyRobust design with long lifeModular design for quick installation and easy maintenance

66 9 19

173 1917161585 1917161512 19161585

GRR Guardian® GrippersNarrow width and a wide range of available jaw travelsCompact design provides high grip force and large moment capacities with low overall weightRugged build withstands high impact and shock loads

Tom Thumb® CylindersLong life design for low maintenanceNFPA repairable for extended lifeproviding long term savingsWide range fo options for easy application and reduced design time

SD/SE SlidesShort or long body in 5 bore sizesStandard or oversize shaftsSeveral switch optionsOver 45 standard optionsEasy mounting

CV CylindersISO/VDMA interchange for easy mounting (metric unit)Imperial unit provides simplified integration in imperial facilitiesPTFE wear ring and built-in shock pads Rodlok® option for easy and dependable locking of piston rod

191716

1917161512

191817

191716151410 151085 158532 16

SxH/SxL9 bore sizesNo metal to metal contactCorrosion-resistant options provide protection in harsh environmentsTwin switch slots for flush switch mounting

SFP SlidesLong travel lengths (27 mm up to 1800 mm, and 40 mm up to 3400 mm)Space-saving designSmooth, precise movementHigh load capacity, very low deflection

182 1716152 19

Replacement Cam Follower WheelsSignificantly longer life than competitor wheelsCan be made in a variety of materials and sizes

11

81 - 8 0 0 - 6 � 4 - 8 5 1 1 w w w . p h d i n c . c o m

STPCompact design utilizes rail bearing technology for smooth precision movement5 sizes with a variety of optionsMounts directly to Series SFP to create rugged, compact, precise pick-and-place devices

SFMMultiple adjustable midstopsSpace saving rodless slide designLowest deflection and highest moment capacity combination in the industryAvailable in 2 bore sizesPrecision rail bearing

SGLong travelHighest load capacity saddle type slideLowest cost per travel length and loadAvailable in 6 bore sizes Rodlok® option available

GRSLow profile, high forceRugged jaw support, hardened jaws and hardcoated bearing surfaces5 sizes2 jaw travels each size

GRWJaws have large tooling surfaces and precision dowel holes for accurate tooling attachmentLarge diameter jaw guides allow long tooling lengths and high moment capabilities and reduce deflectionDependable design5 sizes

GRT3 jaw design provides self-centering and maximum contact between part and jaw toolingIdeal for high moment applications8 sizes

GRKIdeal for assembly and roboticsHighest average grip force to weight ratioPrecision jaw movement wear compensating over life of the unitHigh moment capacity allows for long tooling and high part weights4 sizes

electricEGRKIdeal for assembly and roboticsLong or short jaw travels with high force or high speed for maximum flexibilityPrecision jaw movement wear compensating over life of the unitHigh moment capacity allows for long tooling and high part weights3 sizes

More automation solutions from PHD

For information on other PHD products,ask for the PHD Main Catalog.

PHD, Inc.9009 Clubridge Drive

P.O. Box 9070, Fort Wayne, Indiana 46899 U.S.A.Phone (260) 747-6151 • Fax (260) 747-6754

www.phdinc.com • [email protected]

PHDinEurope GmbHArnold-Sommerfeld-Ring 252499 Baesweiler, Germany

Tel. +49 (0)2401 805 230 • Fax +49 (0)2401 805 232www.phdinc.com • [email protected]

3M-I 12/09 8000

For more information,request the PPC Binder and CD.

Documents

PHD Plastic Packaging Solutions