Upload
duongthu
View
213
Download
0
Embed Size (px)
Citation preview
Pipe Wrap Tape & Sealants
E-1PASCOSPECIALTY.COM3/25/18
PASCO “All Weather” Pipe Protection Tape is a pure physical barrier that is moisture proof, inert and non-conducting. Whether the need is to protect overhead piping in industrial applications, exposed pipe anywhere, or direct burial piping, this tape gives a completely uniform coating all around.
PASCO’s “All Weather” Pipe Protection Tape is a tough PVC plastic tape with special high tack adhesives formu-lated to resist corrosion. It is easy to apply by hand with no special tools or equipment. It provides positive protection against abrasion and corrosive action for steel pipe, fittings & electrical conduit systems.
Uses:• Corrosion protection for metal piping systems above and
below ground.• Corrosion protection for fittings and joints on mill coated
pipe.• Corrosion protection of electrical conduit & fittings.
Features:• Resists corrosive action by salt water, soil acids, alkalies
and salts.• Prevents dielectric corrosion between buried steel pipe
and soil minerals.• Resists the effects of outdoor weathering and sunlight
exposure.• High abrasion resistance.• Highly conformable over a wide temperature range.• Excellent insulating properties.• Resists commonly encountered chemicals and chemical
vapors.• Protects against fungus and bacteria. • Standard widths.
BLACK PIPE WRAP TAPE PRINTED
Meets IAPMO® IS 13-2000 PASCO can cut tape in any width. Contact us with your requirements.
Pipe Protection Tape System
PART NUMBER WIDTH MIL LENGTH ROLLS
PER CASE9051-R 1” 10 100’ 489052-R 2” 10 100’ 249054-R 4” 10 100’ 129056-R 6” 10 100’ 89061-R 1” 20 100’ 489062-R 2” 20 100’ 249064-R 4” 20 100’ 129066-R 6” 20 100’ 89068-R 8” 20 100’ 6
IMPORTANT:Always use PASCO Pipe Primer
on ALL Pipe-wrapping Jobs!
*Custom Sizes Available
Pipe Wrap Tape & Sealants
E-2 Lynwood, CA (310) 537-7782Curtis Bay, MD (410) 360-5010
3/25/18
Pipe Wrap Primer
• PASCO Pipe Primer is a quick drying rubber base primer that permeates pits and irregularities on the pipe surface and prepares the metal for tape application.
• PASCO Pipe Primer is made to be compatible with the adhesives on PASCO Pipe Protection Tape.
• PASCO Pipe Primer is easily brushed on the pipe and fittings. The application of the primer enhances the surface preparation and adds strength adhesion at low cost.
• Pint and quart sizes with dauber.
Pipe Tape Coverage Chart
PART NUMBER SIZE
COVERAGE IN SQUARE
FEET* 9043 Pint 65 9046 Quart 125
1 Square = 100 Square feet of tape1” Width = 12 Rolls per square2” Width = 6 Rolls per square4” Width = 3 Rolls per square
APPLICATION DIRECTIONS1. Surfaces to be wrapped
must be clean and dry. Any oil or grease must be removed.
2. Any burrs or sharp edges must be removed or smoothed.
3. Before tape application, all bare pipe and fittings to be wrapped must be coated with PASCO PIPE PRIMER.
4. Weld beads shall be covered with one wrap or layer of tape prior to spiral wrapping.
5. Tape shall be spirally wrapped the length of the pipe using one half lap for double thickness or 1/2” overlap, depending on the individual installation.
6. When pipe is mill coated, tape must be used on the fittings and joints. To wrap a joint, first coat joint with primer. Joint shall be wrapped with tape spirally beginning on the mill coat-ing 3” from joint. Cover joint and end tape on mill coating 3” past joint.
* Approximate: Depends on surface condition of the pipe
IMPORTANT:Always use PASCO Pipe Primer
on ALL Pipe-wrapping Jobs!
ID OD
RECOM-MENDED
TAPE WIDTH
MINIMUM TAPE
OVERLAP
SQUARES OF TAPE NEEDED
PER 100 LINEAL FEET OF PIPE
––––––––MINIMUM OVERLAP
SQUARES OF TAPE NEEDED
PER 100 LINEAL FEET OF PIPE
––––––––HALF-
LAPPED
NUMBER OF SQUARE FEET PER 100 LINEAL FEET
OF PIPE
1/2” .84” 1” 1/4” .294 .44 22.03/4” 1.05” 1” 1/4” .367 .55 27.53/4” 1.05” 2” 3/8” .338 .55 27.51” 1.32” 1” 1/4” .461 .691 34.61” 1.32” 2” 3/8” .425 .691 34.61” 1.32” 4” 1/2” .395 .691 34.6
1-1/4” 1.66” 2” 3/8” .535 .869 43.51-1/4” 1.66” 4” 1/2” .497 .869 43.51-1/2” 1.90” 2” 3/8” .612 .995 49.71-1/2” 1.90” 4” 1/2” .568 .995 49.7
2” 2.38” 2” 3/8” .767 1.246 62.32” 2.38” 4” 1/2” .712 1.246 62.3
2-1/2” 2.88” 2” 3/8” .928 1.508 75.42-1/2” 2.88” 4” 1/2” .862 1.508 75.4
3” 3.50” 2” 3/8” 1.128 1.833 91.63” 3.50” 4” 1/2” 1.047 1.833 91.6
3-1/2” 4.00” 2” 3/8” 1.289 2.094 104.73-1/2” 4.00” 4” 1/2” 1.197 2.094 104.7
4” 4.50” 2” 3/8” 1.450 2.356 117.84” 4.50” 4” 1/2” 1.346 2.356 117.8
4-1/2” 5.00” 4” 1/2” 1.496 2.618 130.95” 5.75” 4” 1/2” 1.667 2.916 145.86” 6.63” 4” 1/2” 1.984 3.471 173.66” 6.63” 6” 1/2” 1.894 3.471 173.67” 7.63” 4” 1/2” 2.283 3.995 199.77” 7.63” 6” 1/2” 2.179 3.995 199.78” 8.63” 4” 1/2” 2.582 4.519 255.98” 8.63” 6” 1/2” 2.465 4.519 255.9
Pipe Diameter
Pipe Wrap Tape & Sealants
E-3PASCOSPECIALTY.COM3/25/18
Pipe Thread Seal Tape - PTFE
Yellow Gas Line Thread Seal Tape - PTFE
PART NUMBER
WIDTH x LENGTH
9000-100 1/2” x 260’
• Seals and makes joints leaktight regardless of pipe material or fluid. Just a quick wind around male joint. This pure PTFE tape resists temperatures from -450° to +500° F. Ideal for steam lines, heating, cooling and cryogenic systems, oil refinery pipes, aircraft fittings and missile systems. Averages less than a cent per application, eliminates liquids, pastes and brushes.
• THE VERSATILE SEALANT PASCO PTFE tape will seal all threaded
joints-any material: copper, brass, cast iron, aluminum, monel, stainless steel, plastic, synthetic rubber, glass, or ceramic. In addition to resisting high and low temperatures, it can be used for high pressure or vacuum-liquid or gas.
• KEEPS THREADS INTACT Self lubricating PASCO PTFE tape makes
assembly or disassembly easy. Eliminates the need for over tightening. Prevents galling, seizing and cross threading.
• MINIMUM MAINTENANCE PTFE tape remains impervious to the most
corrosive fluids for the life of the joint. Won’t dry out, crack, melt, or dissolve. Stands up to maximum pressures and vibration.
• MEETS MIL SPEC T-27730A
WIDTH 260” 520” 1296”
1/2” 9010-25 9014-25 9018-101/2” 9010-100 9014-100 9018-503/4 9020-25 9024-100 —3/4” 9020-70 — —1” 9030-50 9034-50 —
• Specifically designed to seal threads in natural gas, propane, butane, kerosene and petroleum oil lines.
• MEETS MIL SPEC T-27730A
• For use on threads NOT exceeding 1-1/2”
Pipe Wrap Tape & Sealants
E-4 Lynwood, CA (310) 537-7782Curtis Bay, MD (410) 360-5010
3/25/18
Felt Pipe Wrap
Cloth and Aluminum Foil Duct Tape
PART NUMBER SIZE MATERIAL
9119-R 2” x 60 Yard Cloth 9123-R 2” x 50 Yard Foil
• Prevents heating and cooling loses • Blocks odors and moisture• 4 Mil.• Sold by the roll• 24 Rolls per case
• Adhesive backed grey wool felt• Soundproofs and insulates pipe• Helps prevent pipe clatter• Self-adhering adhesive peel back• Stops electrolysis• Used in pipe hangers & pipe clamps• 2” wide x .250” thick x 25’ coil
PART NUMBER WIDTH LENGTH
2640 2” 25’USAMade In
Pipe Wrap Tape & Sealants
E-5PASCOSPECIALTY.COM3/25/18
PART NUMBER
59054
Rapid Seal
• Forms a solid piece of rubber in 30 minutes• Works on dirty, wet, oily, surfaces. No special surface
preparation required. Stops leaks in copper, PVC, • Galvanized, ABS, Brass, CPVC, PVC, Copper pipe.• Works under water• Self-bonding• No messy epoxy• UL listed• Suitable for voltage to 600V• Works at temperatures of -27° to 212°• Holds up to 100 PSI • Convenientsize1”x16’
IMPORTANT NOTICE:Rapid Seal MUST NOT be used to seal items that will come in contact or be exposed to gasoline, hexane or toluene.
Vinyl Electrical Tape
• Multi-Climate• 3/4” x 60 feet• 3 mil.• Sold in packs of 10
PART NUMBER
1716
Pipe Wrap Tape & Sealants
E-6 Lynwood, CA (310) 537-7782Curtis Bay, MD (410) 360-5010
3/25/18
Polyurethane Expanding Foam
• Insulates to an R value of 5• UL classified• Easy to use, multi-purpose urethane foam• Unlike ordinary sealants, it expands three times its
original volume• Adheres to all building materials except Teflon,
silicone and polyethylene• Seals by expanding into gaps, cracks and crevices• 12-month limited shelf life
PART NUMBER SIZE
12333 12 oz. 24333 24 oz.
Pipe Wrap Tape & Sealants
E-7PASCOSPECIALTY.COM3/25/18
PART NUMBER SIZE
1709 10 oz. Cartridge
PART NUMBER SIZE
1711 3.7 oz. Tube
• FDA/USDA Approved• 100 % Silicone• Resistant to mold &
mildew• Excellent adhesion• Forms a waterproof seal• Permanently flexible• Resistant to household
cleaning chemicals• Will not yellow or
discolor• Fast cure
• To insure a waterproof seal between the lower drain flange and the pan material, apply a small ring of #1709 caulking on top of the lower drain flange.
• Can be used anywhere an economical, weather resistant, long life sealant is required
Plumbers GoopPlumbers Silicone Sealant FDA/USDA Approved
Shower Pan Caulk
Plumbers Goop Seals:• Dry porcelain• Urinal spud washers• Tank-to-bolts • Drain gaskets• Ceramic tile• Bath overflow washers• Gaps around exposed hose bibbs
PART NUMBER SIZE COLOR
1708 2.8 oz. Cartridge White1710 2.8 oz. Cartridge Clear1712 10 oz. Cartridge White1713 10 oz. Cartridge Clear