Embed Size (px)
DESCRIPTION
a
Citation preview
1
Drill Pipe
2
1. Features of PetroMaterials Corporation
Experienced Technology PetroMaterials Corporation (PMC) was established in 1994, having its experienced training technology of OCTG pipe & tubes and long term experienced production technology of OCTG and Drill Pipes. Head Quarter is located in Tokyo, Japan . PMC have two(2) major facilities , one in Wakayama, Japan and the other in CangZhou , China . Sales areas are China, Japan, Middle-East, South Asian area and North America.
Wide range OCTG and Drilling materials available Trading department is trading 50,000 tons OCTG materials annually to export Japanese products. API OCTG, Sour Service OCTG, Drill Pipe, Drill Collar, HWDP and Premium Connection are available for wide range size.
Two Production LocationsTwo major Production location are in Japan and China. Threading OCTG, Drill Pipes, Drill Collar and HWDP are manufactured to use Japanese high quality raw materials and high quality production technology.Wakayama Works in JapanWakayama Works is located in the west of Japan closed to Sumitomo Metal Industries, Ltd. (SMI) and is equipped with Upset machine, Walking beam type Heat-Treatment furnace with internal Quenching System, Friction Welding for drill pipe, Threading lathe and NDI system.
Short deliver time can be available, since Mother pipe are being kept in stock which shall be supplied from SMI and Nippon Steel Corporation (NSC).CangZhou Works in China CangZhou Works is located in south of Beijing which manufacture high quality Drill Pipe , HWDP and Drill Collar supported by both experienced Japanese technology and Japan- made equipments. Its mother upset pipe and Tool Joint Blank and Solid Bar for Drill Collar and HWDP are supplied from Wakayama Works , Japan or US steel manufacturer . It has been equipped with Drill pipe manufacturing Line (Friction welding, boring and turning lathe and NDI), Tool Joints line (Heat-treatment furnace and threading) and Drill Collar and HWDP Line (Heat-Treatment, BTA, Turning lathe, Threading) and so on .
Line-up of Products
CASING and TUBING PMC represent SMI (Sumitomo Metal Industries Ltd) and carry SMI’s Casing and Tubing in stocksTubing: 2-3/8” to 4-1/2” Casing: 4-1/2” to 16”18-5/8” and 20” Casing with Buttress threads : PMC to buy ERW plain end pipes from JFE Steel & NSC (Nippon Steel co.) and to cut threads at Wakayama Works , Japan to make finished Casing
Drill PipesProduction range cover 2-3/8” to 6-5/8”PMC to purchase Green Tube from SMI and NSC and to perform Upset and Heat Treatment at Wakayama Works followed by the Friction Welding to be performed at both Wakayama and CangZhou Works to customer’s preference.High Torque Drill Pipe and Sour Service Drill Pipes are available.Start production of Tool Joint in July 2009.
HWDP (Heavy Wall Drill Pipe)Both Friction welding and Integral Type are available＊Friction welding Type : 4137H Materials and AISI 1340/G105 for Central part to be used for middle joints are used.＊Integral Type : Quenched and tempered 4145H materials are used
Drill Collar （Slick and Spiral)2-3/8” to 11” OD Drill Collar to AISI 4145HM are available.Non Magnetic Drill Collar is also available.
3
2. Quality and Manufacturing of Drill Pipe
Note) Green Pipes supplied from Japanese Seamless Manufacturers Sumitomo Metal Industries Ltd. andNippon Steel Co. shall be used as mother pipes.Forged Tool Joint materials mainly made in Japan shall be used.
Drill Pipe Manufacturing Process
Pipe Body Tool JointSteel Making Forged Materials
I IPipe Hot Rolling Mother Pipe Turning & Boring
I IInspection Heat Treatment
I IUpsetting Hardness test
I Mechanical TestInspection I
I ThreadingHeat Treatment Inspection
I INDT Inspection Cold Work(Option)
I IUpset End Machining Die Stamping
ISurface Treatment
IHard Facing(Option)
IBreak in (Option)
IFriction Welding
IRemove Bead and Burr on ID Boring and OD Turning
IHeat Treatment
IInspection
IMeasuring of Length and WeightMarking
IRack Packing (Option)
IShipping
Optional Specification is available upon requiredHard FacingBreak-in (Make & Break)Cold WorkInternal Coating
4
Upset 2-3/8” to 6-5/8” Heat Treatment 2-3/8” to 7”
Hot Rotary Straightening Ultra Sonic Inspection
Rotary Friction Welder Friction Welding
IH(Induction Heating) Heat Treatment Ultrasonic Inspection on weld zone
5
API and ISO Qualification Certificate
Specification Registration NumberISO 9001:2008 0709API Specification Q1 Q1-0449ISO/TS 29001 TS-0262API-Spec 7-1 7-1-0574API Spec 5CT 5CT-0818API Spec 5DP 5DP-0081
API Q1, ISO-9001, API-Spec 5D, API-Spec 7-1, API Spec 5CT and latest API-Spec5DP are Certified.
6
3. Technical Properties and Drill Pipe SpecificationGrades, Specifications and Availability
Drill Pipe and Tool Joint Mechanical Properties and Chemical Composition
Drill Pipe Mechanical PropertiesSPEC Yield Strength Tensile Strength Elongation Hardness HRC Impact
Min Max Min Max Min Ave. Each Value SSCpsi (Mpa)psi (Mpa) psi (Mpa) psi (Mpa) % Max Max/Min ft-lbs(J)
API 5DP Group 1 E75 75,000 517 105,000 723 100,000 689 -- API formula -- 40 (54) --Group 3 X95 95,000 655 125,000 862 105,000 724 -- API formula -- 40 (54) --
G105 105,000 724 135,000 931 115,000 793 -- API formula -- 40 (54) --S135 135,000 931 165,000 1,138 145,000 1,000 -- API formula -- 40 (54) --
IRP Sour SS75 75,000 517 95,000 655 95,000 655 115,000 793 API formula 22 24 50 (70) 85%SMYSSS95 95,000 655 110,000 758 105,000 724 130,000 896 API formula 25 27/18 59 (80) 85%SMYSSS105 105,000 724 120,000 827 115,000 793 140,000 965 API formula 28 29/21 59 (80) 85%SMYS
PMC Mild MS75 75,000 517 95,000 655 95,000 655 -- API formula 22 24 50 (70) NASour MS95 95,000 655 110,000 758 105,000 724 -- API formula 25 27 59 (80) NA
MS105 105,000 724 120,000 827 115,000 793 -- API formula 29 31 59 (80) NAPMC Sour SS75 75,000 517 95,000 655 95,000 655 115,000 793 API formula 22 24 50 (70) 85%SMYS
SS95 95,000 655 110,000 758 105,000 724 130,000 896 API formula 25 27 59 (80) 85%SMYSSS105 105,000 724 120,000 827 115,000 793 140,000 965 API formula 29 31 59 (80) 85%SMYS
Note) NA : Not Applicable
Tool Joint Mecahnical PropertiesSPEC Yield Strength Tensile Strength Elongation Hardness Impact
Min Max Min Max Min Value SSCpsi (Mpa)ksi(Mpa) ksi(Mpa) ksi(Mpa) % HB(HRC) ft-lbs(J)
API 5DP PSL1 120,000 827 165,000 1,137 140,000 965 -- 13Min 285 40(54) --
5DP PSL3 120,000 827 150,000 1,033 140,000 965 -- 13 285 to 341 40(54) @-20℃IRP Sour
SS-110 110,000 758 125,000 861 125,000 862 145,000 1,000 15 Max 32 66 (90) 65%SMYSPMC Mild
Sour MS-120 120,000 827 --- 140,000 965 -- 15 Max 32 66 (90) NAPMC Sour
PMC-110 110,000 758 125,000 861 120,000 827 140,000 965 15 Max 32 66 (90) 65%SMYS
Chemical Composition of Drill Pipes and Tool Joints
Spec Grade C Si Mn P S Cr MoAPI E75 Max 0.030 Max 0.0205DP X95
G105 Max MaxS135 -- -- -- 0.020 0.015 -- --
PMC E75X95G105 Max Max Max Max MaxS135 0.31 0.35 1.00 0.015 0.08 0.85/1.10 0.15/0.40
PMC MS75 Max Max Max MaxSour SS75 0.38 -- 0.90 0.015 0.10 -- --
MS95 Max MaxSS95 0.25/0.35 -- 0.40/1.00 0.015 0.10 0.90/1.30 0.30/0.60MS105 Max MaxSS105 0.25/0.35 -- 0.40/1.00 0.015 0.10 0.90/1.30 0.30/0.60
API 5DP Max Max(Spec7) -- -- -- 0.020 0.015 -- --
PMC Tool Joint Max Max Max MaxSpec 7 0.35/0.40 0.35 1.20 0.020 0.015 0.80/1.20 0.20/0.40Mild Sour Max Max Max MaxMS-120 0.30/0.40 0.35 1.20 0.020 0.010 0.80/1.20 0.25/0.80
PMC Sour Max Max Max MaxPMC-110 0.25/0.40 0.35 1.00 0.015 0.010 0.70/1.30 0.40/0.70
Dril
l Pip
eTo
ol J
oint
Chemical Composition (Weight %)
7
Available Size and Grade
Available Sizes and GradesDrill Pipe Tool Joint
Size Nominal API 5D or 5DP API PMDSOD Weight Upset Group 1 Group 3in lb/ft in mm E X G S2-3/8" 6.65 0.280 7.11 EU A A NC26 PMDS NC26
2-7/8" 10.40 0.362 9.19 IU A AEU A A NC31 PMDS NC31
3-1/2" 9.50 0.254 6.45 IU AEU A NC38 PMDS NC38
13.30 0.368 9.35 IU A AEU A A NC38 PMDS NC38
15.50 0.449 11.40 IU AEU A A NC38 PMDS NC38IEU A NC40 PMDS NC40
4" 14.00 0.330 8.38 IU A A NC40 PMDS NC40EU A A NC46 PMDS NC46
4-1/2" 13.75 0.271 6.88 IU A NC46 PMDS NC46EU A NC50 PMDS NC50
16.60 0.337 8.56 EU A A NC50 PMDS NC50
IEU A A NC464 1/2FH
PMDS NC46
20.00 0.430 10.92 IU A A NC50 PMDS NC50
EU A A NC464 1/2FH
PMDS NC46
5" 16.25 0.296 7.52 IU A19.50 0.362 9.19 EU A
IEU A A NC505-1/2FH
PMDS NC50PMDS 55FH
25.60 0.500 12.70 EU A
IEU A A NC505-1/2FH
PMDS NC50PMDS 55FH
5-1/2" 21.90 0.361 9.17 IEU A A 5 1/2FH PMDS 55FH24.70 0.415 10.54 IEU A A 5 1/2FH PMDS 55FH
5-7/8" 23.40 0.361 9.17 IEU PMDS-58HT26.30 0.415 10.54 IEU PMDS-58HT
6-5/8" 25.20 0.330 8.38 IEU A A 6-5/8FH PMDS 65FH27.70 0.362 9.19 IEU A A 6-5/8FH PMDS 65FH
Note) A : Applicable
ThicknessWall
8
New Drill Pipe Torsional, Tensile and Internal Pressure (1)
SizeOD
NominalWeight
PlainEndWeight
WallThickness
IDWallThickness
IDSectionAreaPipe Body
PolarSectionalModulas
in lb/ft lb/ft in in mm mm sq.in cu.in E75 X95 G105 S1352-3/8" 2.375 4.83 4.43 0.190 1.995 4.83 50.67 1.3042 1.321 4,760 6,030 6,670 8,570
2.375 6.65 6.26 0.280 1.815 7.11 46.10 1.8429 1.733 6,250 7,920 8,750 11,250
2-7/8" 2.875 6.85 6.16 0.217 2.441 5.51 62.00 1.8120 2.241 8,080 10,240 11,320 14,5502.875 10.40 9.72 0.362 2.151 9.19 54.64 2.8579 3.204 11,550 14,640 16,180 20,800
3-1/2" 3.500 9.50 8.81 0.254 2.992 6.45 76.00 2.5902 3.923 14,150 17,920 19,800 25,4603.500 13.30 12.31 0.368 2.764 9.35 70.21 3.6209 5.144 18,550 23,500 25,970 33,3903.500 15.50 14.63 0.449 2.602 11.40 66.09 4.3037 5.847 21,090 26,710 29,520 37,950
4" 4.000 11.85 10.46 0.262 3.476 6.65 88.29 3.0767 5.400 19,470 24,670 27,260 35,0504.000 14.00 12.93 0.330 3.340 8.38 84.84 3.8048 6.458 23,290 29,500 32,600 41,9204.000 15.70 14.69 0.380 3.240 9.65 82.30 4.3216 7.157 25,810 32,690 36,130 46,460
4-1/2" 4.500 13.75 12.24 0.271 3.958 6.88 100.53 3.6005 7.184 25,910 32,820 36,270 46,6304.500 16.60 14.98 0.337 3.826 8.56 97.18 4.4074 8.543 30,810 39,020 43,130 55,4504.500 20.00 18.69 0.430 3.640 10.92 92.46 5.4981 10.232 36,900 46,740 51,660 66,4204.500 22.82 21.36 0.500 3.500 12.70 88.90 6.2832 11.345 40,910 51,820 57,280 73,640
5" 5.000 16.25 14.87 0.296 4.408 7.52 111.96 4.3743 9.718 35,040 44,390 49,060 63,0805.000 19.50 17.93 0.362 4.276 9.19 108.61 5.2746 11.415 41,170 52,140 57,630 74,1005.000 25.60 24.03 0.500 4.000 12.70 101.60 7.0686 14.491 52,260 66,190 73,160 94,060
5-1/2" 5.500 19.20 16.87 0.304 4.892 7.72 124.26 4.9624 12.221 44,070 55,830 61,700 79,3305.500 21.90 19.81 0.361 4.778 9.17 121.36 5.8282 14.062 50,710 64,230 70,990 91,2805.500 24.70 22.54 0.415 4.670 10.54 118.62 6.6296 15.688 56,570 71,660 79,200 101,830
6-5/8" 6.625 25.20 22.19 0.330 5.965 8.38 151.51 6.5262 19.572 70,580 89,402 98,812 127,0446.625 27.70 24.22 0.362 5.901 9.19 149.89 7.1227 21.156 76,295 96,640 106,813 137,331
Note) Data given in Table is based on API RP7G.lb/ft = 3.3996 x A (col.6)A = 0.7854 x (D2 - d2)Z = 0.19635 (D4 - d4) / D
Torsional Yield Strengthlb-lbs
New Drill Pipe Torsional, Tensile and Internal Pressure (2)
SizeOD
NominalWeight
in lb/ft E X G S E X G S E X G S2-3/8" 2.375 4.83 97,820 123,900 13,940 176,070 11,040 13,980 15,460 19,030 10,500 13,300 14,700 18,900
2.375 6.65 138,210 175,070 193,500 248,790 15,600 19,760 21,840 28,080 15,470 19,600 21,660 27,850
2-7/8" 2.875 6.85 135,900 172,140 190,260 244,620 10,470 12,940 14,020 17,030 9,910 12,550 13,870 17,8302.875 10.40 214,340 271,500 300,080 385,820 16,510 20,910 23,110 29,720 16,530 20,930 23,140 29,750
3-1/2" 3.500 9.50 194,260 246,070 271,970 349,680 10,000 12,080 13,060 15,740 9,530 12,070 13,340 17,1503.500 13.30 271,570 343,990 380,200 488,820 14,110 17,880 19,760 25,400 13,800 17,480 19,320 24,8403.500 15.50 322,770 408,850 451,880 580,990 16,770 21,250 23,480 30,190 16,840 21,300 23,570 30,310
4" 4.000 11.85 230,760 292,290 323,060 415,360 8,380 9,980 10,710 12,610 8,600 10,890 12,040 15,4704.000 14.00 285,360 361,450 399,500 513,650 11,350 14,380 15,900 20,140 10,830 13,720 15,160 19,4904.000 15.70 324,120 410,550 453,770 583,410 12,900 16,340 18,050 23,210 12,470 15,790 17,460 22,440
4-1/2" 4.500 13.75 270,030 342,040 378,050 486,060 7,170 8,410 8,960 10,280 7,900 10,010 11,070 14,2304.500 16.60 330,560 418,710 462,780 595,000 10,390 12,760 13,820 16,770 9,830 12,450 13,760 17,6904.500 20.00 412,360 522,320 577,300 742,240 12,960 16,420 18,150 23,330 12,540 15,890 17,560 22,5804.500 22.82 471,240 596,900 659,730 848,230 14,810 18,770 20,740 26,670 14,580 18,470 20,420 26,250
5" 5.000 16.25 328,070 415,560 459,300 590,530 6,940 8,110 8,620 9,830 7,770 9,840 10,880 13,9905.000 19.50 395,590 501,090 553,830 712,070 9,960 12,020 13,000 15,670 9,500 12,040 13,300 17,1005.000 25.60 530,140 671,520 742,200 954,260 13,500 17,100 18,900 24,300 13,130 16,630 18,380 23,630
5-1/2" 5.500 19.20 372,180 471,430 521,050 669,930 6,040 6,940 7,310 8,090 7,250 9,190 10,160 13,0605.500 21.90 437,120 553,680 611,960 786,810 8,410 10,020 10,750 12,670 8,610 10,910 12,060 15,5105.500 24.70 497,220 629,810 696,110 895,000 10,460 12,930 14,010 17,020 9,900 12,540 13,860 17,830
\6-5/8" 6.625 25.20 489,460 619,990 685,250 881,040 4,790 5,320 5,500 6,040 6,540 8,280 9,150 11,770
6.625 27.70 534,200 676,650 747,880 961,560 5,890 6,760 7,100 7,810 7,170 9,080 10,040 12,910Note) Data given in Table is based on API RP7G.
Tensile Strengthlbs
Collapse Pressurepsi
Internal Pressurepsi
9
Upset Drill Pipe Dimensions and Weights (Group 1 E75)Dimension Pipe Body Calculated Weight Upset Dimension
SizeOD
NominalWeight
OD IDPlainEnd
UpsetOD+1/8-1/32
ID±1/16
Length ofInternalUpset+1 1/2 -1/2
Length ofInternalTapermin
Length ofExternalTapermin
Length Endof Pipeto TaperFade Out
in lb/ft in in mm in lb/ft lb in in in in in in in in maxD t d wpe ew Dou dou Liu Miu Leu Leu + meu
Internal Upset ( IU ) Drill Pipe2-7/8" 10.40 2.875 0.362 9.19 2.151 9.72 3.20 2.875 1 5/16 1 3/4 1 1/2 -- -- -- --3-1/2" 9.50 3.500 0.254 6.45 2.992 8.81 4.40 3.500 2 1/4 1 3/4 -- -- -- -- --3-1/2" 13.30 3.500 0.368 9.35 2.764 12.31 4.40 3.500 1 15/16 1 3/4 1 1/2 -- -- -- --3-1/2" 15.50 3.500 0.449 11.40 2.602 14.63 3.40 3.500 1 15/16 1 3/4 1 1/2 -- -- -- --4" 11.85 4.000 0.262 6.65 3.476 10.46 4.20 4.000 2 15/16 1 3/4 -- -- -- -- --4" 14.00 4.000 0.330 8.38 3.340 12.93 4.60 4.000 2 3/4 1 3/4 2 -- -- -- --4-1/2" 13.75 4.500 0.271 6.88 3.958 12.24 5.20 4.500 3 3/8 1 3/4 -- -- -- -- --5" 16.25 5.000 0.296 7.52 4.408 14.87 6.60 5.000 3 3/4 1 3/4 -- -- -- -- --
External Upset ( EU ) Drill Pipe2-3/8" 6.65 2.375 0.280 7.11 1.815 6.26 1.80 2.656 1.815 -- -- 1 1/2 1 1/2 -- 42-7/8" 10.40 2.875 0.362 9.19 2.151 9.72 2.40 3.219 2.151 -- -- 1 1/2 1 1/2 -- 43-1/2" 9.50 3.500 0.254 6.45 2.992 8.81 2.60 3.938 2.992 -- -- 1 1/2 1 1/2 -- 43-1/2" 13.30 3.500 0.368 9.35 2.764 12.31 4.00 3.938 2.602 2 1/4 2 1 1/2 1 1/2 -- 43-1/2" 15.50 3.500 0.449 11.40 2.602 14.63 2.80 3.938 2.602 -- -- 1 1/2 1 1/2 -- 44" 11.85 4.000 0.262 6.65 3.476 10.46 5.01 4.500 3.476 -- -- 1 1/2 1 1/2 -- 44" 14.00 4.000 0.330 8.38 3.340 12.93 5.01 4.563 3.340 -- -- 1 1/2 1 1/2 -- 44-1/2" 13.75 4.500 0.271 6.88 3.958 12.24 5.61 5.063 3.958 -- -- 1 1/2 1 1/2 -- 44-1/2" 16.60 4.500 0.337 8.56 3.826 14.98 5.61 5.063 3.826 -- -- 1 1/2 1 1/2 -- 44-1/2" 20.00 4.500 0.430 10.92 3.640 18.69 5.61 5.063 3.640 -- -- 1 1/2 1 1/2 -- 4
Internal External Upset ( IEU ) Drill Pipe4-1/2" 16.60 4.500 0.337 8.56 3.826 14.98 8.10 5.063 3 5/32 2 1/2 2 1 1/2 1 1 1/2 --4-1/2" 20.00 4.500 0.430 10.92 3.640 18.69 8.60 5.063 3 2 1/4 2 1 1/2 1 1 1/2 --5" 19.50 5.000 0.362 9.19 4.276 17.93 8.60 5.188 3 11/16 2 1/4 2 1 1/2 1 1 1/2 --5" 25.60 5.000 0.500 12.70 4.000 24.03 7.80 5.188 3 7/16 2 1/4 2 1 1/2 1 1 1/2 --5-1/2" 21.90 5.500 0.361 9.17 4.778 19.81 10.60 5.750 4 2 1/4 2 1 1/2 1 1 1/2 --5-1/2" 24.70 5.500 0.415 10.54 4.670 22.54 9.01 5.750 4 2 1/4 2 1 1/2 1 1 1/2 --6-5/8" 25.20 6.625 0.330 8.38 5.965 22.19 25.90 7.000 5 5/16 4 1/2 2 3 -- -- 5 1/26-5/8" 27.70 6.625 0.362 9.19 5.901 24.21 24.03 7.000 5 5/16 4 1/2 2 3 -- -- 5 1/2
Figure Upset Drill Pipe for Weld-on Tool Joint (Group 1)
meu
WallThickness
Length of ExternalTaper
min max
a Designations (Column 1) are show n for the purpose of identif ication in ordering.b For internal-upset drill pipe, the tolerance on the outside diameter of the upset, D ou , shall be + 1/ 8 , － 0 in. A s light external upset w ithin these tolerancesis permissible.c Maximum taper on inside diameter of internal upset and internal-external upset is 1/ 4 in./f t on diameter.d Weight gain or loss due to end f inishing.e The specif ied upset dimensions do not necessarily agree w ith the bore and OD dimensions of f inished w eld-on assemblies. Upset dimensions w ere chosento accommodate the various bores of tool joints and to maintain a satisf actory cross section in the w eld zone af ter f inal machining of the assembly.f By agreement betw een purchaser and manufacturer or processor, the length of upset for Grade E drill pipe may be the same as for the higher grades inGroup 3.g 3 1/ 2 " OD 13.3 lb/f t External-Upset Drill Pipe has a slight internal upset not illustrated in Figure.h Liu tolerance for 6 5/ 8 w eights is + 2, － 1/ 2 in.
10
Upset Drill Pipe Dimensions and Weights (Group 3 X95 G105 S135)Dimension Pipe Body Calculated Weight Upset Dimension
SizeOD
NominalWeight OD ID
PlainEnd Upset
OD+1/8-1/32
ID±1/16
Length ofInternalUpset+1 1/2 -1/2
Length ofInternalTaper min
Length ofExternalUpset min
Length Endof Pipe toTaperFadeoutMax
in lb/ft in in mm in lb/ft lb in in in in in inD t d wpe ew Dou dou Liu miu Leu Leu + meu
Internal Upset ( IU ) Drill Pipe2-7/8" 10.40 2.875 0.362 9.19 2.151 9.72 5.10 2.875 1 5/16 3 1/2 -- -- --3-1/2" 13.30 3.500 0.368 9.35 2.764 12.31 7.41 3.500 1 15/16 3 1/2 -- -- --4" 14.00 4.000 0.330 8.38 3.340 12.93 8.81 4.000 2 5/8 3 1/2 -- -- --5" 16.25 5.000 0.296 7.52 4.408 14.87 13.61 5.000 3 9/16 3 1/2 -- -- --
External Upset ( EU ) Drill Pipe2-3/8" 6.65 2.375 0.280 7.11 1.815 6.26 4.60 2.656 1 9/16 4 1/4 -- 3 5 1/22-7/8" 10.40 2.875 0.362 9.19 2.151 9.72 6.21 3.250 1 15/16 4 1/4 -- 3 5 1/23-1/2" 13.30 3.500 0.368 9.35 2.764 12.31 10.21 4.000 2 1/2 4 1/4 -- 3 5 1/23-1/2" 15.50 3.500 0.449 11.40 2.602 14.63 8.21 4.000 2 1/2 4 1/4 -- 3 5 1/24" 14.00 4.000 0.330 8.38 3.340 12.93 14.42 4.625 3 1/16 4 1/4 -- 3 5 1/24-1/2" 16.60 4.500 0.337 8.56 3.826 14.98 17.22 5.188 3 9/16 4 1/4 -- 3 5 1/24-1/2" 20.00 4.500 0.430 10.92 3.640 18.69 16.02 5.188 3 7/16 4 1/4 -- 3 5 1/25" 19.50 5.000 0.362 9.19 4.276 17.93 21.62 5.750 3 15/16 4 1/4 -- 3 5 1/25" 25.60 5.000 0.500 12.70 4.000 24.03 21.22 5.875 3 13/16 4 1/4 -- 3 5 1/2
Internal External Upset ( IEU ) Drill Pipe3-1/2" 15.50 3.500 0.449 11.40 2.602 14.64 11.01 3.781 1 15/16 4 1/4 -- 3 5 1/24-1/2" 16.60 4.500 0.337 8.56 3.826 15.00 8.71 4.750 2 7/8 2 1/2 4 1 1/2 34-1/2" 20.00 4.500 0.430 10.92 3.640 18.71 17.62 4.781 2 13/16 4 1/4 4 3 5 1/25" 19.50 5.000 0.362 9.19 4.276 17.95 16.82 5.188 3 9/16 4 1/4 4 3 5 1/25" 25.60 5.000 0.500 12.70 4.000 24.05 15.42 5.188 3 5/16 4 1/4 4 3 5 1/25-1/2" 21.90 5.500 0.361 9.17 4.778 19.83 21.02 5.750 3 13/16 4 1/4 4 3 5 1/2
24.70 5.500 0.415 10.54 4.670 22.56 18.42 5.750 3 13/16 4 1/4 4 3 5 1/26-5/8" 25.20 6.625 0.330 8.38 5.965 22.21 25.90 7.000 5.315 4 1/2 4 3 5 1/2
27.70 6.625 0.362 9.19 5.901 24.24 24.03 7.000 5.315 4 1/2 4 3 5 1/2
Upset Drill Pipe for Weld-on Tool Joint (Group 3)
WallThickness
a Designations (Column 1) are show n for the purpose of identification in ordering.b For internal-upset drill pipe, the tolerance on the outside diameter of the upset, D ou , shall be + 1/ 8 , － 0 in. A slight external upset w ithin thesetolerances is permissible.c Maximum taper on inside diameter of internal upset and internal-external upset is 1/ 4 in./f t on diameter.d Weight gain or loss due to end f inishing.e The specif ied upset dimensions do not necessarily agree w ith the bore and OD dimensions of fnished w eld-on assemblies. Upset dimensions w erechosen to accommodate the various bores of tool joints and to maintain a satisfactory cross section in the w eld zone after final machining of the assembly.f Liu tolerance for 6 5/ 8 w eights is + 2, － 1/ 2 in
11
PMDS Double Shoulder Connection
PMDS (PetroMaterials Double Shoulder) is
- Interchangeable with API Connections- Interchangeable with market Double Shoulder Connections- Higher Torsional Performance Higher Torque than API- Improved Hydraulic Efficiency Flush ID connections- Recommended for Sour Service grade and drilling- Suitable for Extended Riched Drilling (ERD)
- Repair shop service available Easy Repair same as API Connection
Torsional Torque
0
20,000
40,000
60,000
80,000
100,000
120,000
NC38 NC46 NC50 5-1/2FH
Connections
Torq
ue (f
t-lbs
)
API
PMDS
API NC50 PMDS NC50
Torsional Yield 44,460 58,900 (ft-lbs)Mak-up Torque 26,700 38,300 (ft-lbs)
( 6-5/8"OD 3-1/2"ID)
12
PMDS-58HTID DATA OD
7-1/2" 7-1/4" 7-1/8" 7"4" Torque(ft-lbs ) 93,300 92,600 92,300 91,900
Tension(lbs) 1,577,000 1,577,000 1,577,000 1,577,000Make-up(ft-lbs ) 60,600 60,200 60,000 59,700
4-1/4" Torque(ft-lbs ) 79,800 79,200 78,900 78,500Tension(lbs) 1,375,000 1,375,000 1,375,000 1,375,000Make-up(ft-lbs ) 51,900 51,500 51,300 51,000
PMDS Torsional Strength, Tensile Strength and Make-up Torque
PMDS-NC38 PMDS-NC40ID DATA OD ID DATA OD
5" 4-7/8" 4-3/4" 4-5/8" 5-1/2" 5-3/8" 5-1/4" 5-1/8"2-1/8" Torque(ft-lbs) 34,700 34,500 34,300 34,100 2-7/16" Torque(ft-lbs) 38,900 38,700 38,500 38,300
Tension(lbs) 862,000 862,000 862,000 862,000 Tension(lbs) 918,000 918,000 918,000 918,000Make-up(ft-lbs) 22,600 22,400 22,300 22,200 Make-up(ft-lbs) 25,300 25,200 25,000 24,900
2-5/16" Torque(ft-lbs) 31,200 31,000 30,800 30,600 2-9/16" Torque(ft-lbs) 36,100 35,900 35,700 35,500Tension(lbs) 780,000 780,000 780,000 780,000 Tension(lbs) 857,000 857,000 857,000 857,000Make-up(ft-lbs) 20,300 20,200 20,000 19,900 Make-up(ft-lbs) 23,500 23,300 23,200 23,100
2-7/16" Torque(ft-lbs) 28,600 28,400 28,300 28,100 2-11/16"Torque(ft-lbs) 33,100 32,900 32,700 32,500Tension(lbs) 722,000 722,000 722,000 722,000 Tension(lbs) 792,000 792,000 792,000 792,000Make-up(ft-lbs) 18,600 18,500 18,400 18,300 Make-up(ft-lbs) 21,500 21,400 21,300 21,100
2-9/16" Torque(ft-lbs) 25,900 25,700 25,600 25,400 2-13/16"Torque(ft-lbs) 29,800 29,700 29,500 29,300Tension(lbs) 661,000 661,000 661,000 661,000 Tension(lbs) 725,000 725,000 725,000 725,000Make-up(ft-lbs) 16,800 16,700 16,600 16,500 Make-up(ft-lbs) 19,400 19,300 19,200 19,000
PMDS-NC46 PMDS-NC50ID DATA OD ID DATA OD
6-1/4" 6-1/8" 6" 5-7/8" 6-5/8" 6-1/2" 6-3/8" 6-1/4"2-1/4" Torque(ft-lbs) 71,500 71,200 70,900 70,500 2-3/4" Torque(ft-lbs) 85,000 84,600 84,300 83,900
Tension(lbs) 1,460,000 1,460,000 1,460,000 1,460,000 Tension(lbs) 1,596,000 1,596,000 1,596,000 1,596,000Make-up(ft-lbs) 46,500 46,300 46,100 45,800 Make-up(ft-lbs) 55,300 55,000 54,800 54,500
2-1/2" Torque(ft-lbs) 65,700 65,400 65,100 64,800 3" Torque(ft-lbs) 77,200 76,800 76,500 76,200Tension(lbs) 1,343,000 1,343,000 1,343,000 1,343,000 Tension(lbs) 1,454,000 1,454,000 1,454,000 1,454,000Make-up(ft-lbs) 42,700 42,500 42,300 42,100 Make-up(ft-lbs) 50,200 49,900 49,700 49,500
2-3/4" Torque(ft-lbs) 59,100 58,800 58,500 58,200 3-1/4" Torque(ft-lbs) 68,500 68,200 67,900 67,600Tension(lbs) 1,214,000 1,214,000 1,214,000 1,214,000 Tension(lbs) 1,301,000 1,301,000 1,301,000 1,301,000Make-up(ft-lbs) 38,400 38,200 38,000 37,800 Make-up(ft-lbs) 44,500 44,300 44,100 43,900
3" Torque(ft-lbs) 51,600 51,400 51,100 50,900 3-1/2" Torque(ft-lbs) 58,900 58,700 58,400 58,100Tension(lbs) 1,073,000 1,073,000 1,073,000 1,073,000 Tension(lbs) 1,136,000 1,136,000 1,136,000 1,136,000Make-up(ft-lbs) 33,500 33,400 33,200 33,100 Make-up(ft-lbs) 38,300 38,200 38,000 37,800
3-1/4" Torque(ft-lbs) 43,400 43,200 43,000 42,800 3-3/4" Torque(ft-lbs) 48,500 48,200 48,000 47,800Tension(lbs) 920,000 920,000 920,000 920,000 Tension(lbs) 958,000 958,000 958,000 958,000Make-up(ft-lbs) 28,200 28,100 28,000 27,800 Make-up(ft-lbs) 31,500 31,300 31,200 31,100
PMDS-55FH Equivalent ConnectionsID DATA OD Num ber Equivalent
7-1/4" 7-1/8" 7" 6-7/8" Connection Connection3" Torque(ft-lbs) 106,900 97,700 88,800 80,100 NC26 2-3/8 IF
Tension(lbs) 1,983,000 1,983,000 1,983,000 1,983,000 NC31 2-7/8 IFMake-up(ft-lbs) 69,500 63,500 57,700 52,100 NC38 3-1/2 IF
3-1/4" Torque(ft-lbs) 105,200 96,000 87,100 78,400 NC40 4 FHTension(lbs) 1,829,000 1,829,000 1,829,000 1,829,000 NC46 4 IFMake-up(ft-lbs) 68,400 62,400 56,600 51,000 NC50 4-1/2 IF
3-1/2" Torque(ft-lbs) 96,100 94,100 85,100 76,400Tension(lbs) 1,664,000 1,664,000 1,664,000 1,664,000Make-up(ft-lbs) 62,500 61,200 55,300 49,700
3-3/4" Torque(ft-lbs) 84,900 84,600 82,800 74,100Tension(lbs) 1,486,000 1,486,000 1,486,000 1,486,000Make-up(ft-lbs) 55,200 55,000 53,800 48,200
4" Torque(ft-lbs) 72,700 72,400 72,100 71,400Tension(lbs) 1,296,000 1,296,000 1,296,000 1,296,000Make-up(ft-lbs) 47,300 47,100 46,900 46,400
Note)Combination OD and ID of Tool Joint not in Table is available uponrequest.
13
Combination of Drill Pipe and Tool Joint Nominal Drill Pipe Tool JointOD Weight Wall Thickness ID UPSET GRADE Connection OD IDin(mm) lbs in (mm) in (mm) STYLE in (mm)
2 3/8 6.65 0.280 (7.11) 1.815 (46.1) EU E75 *NC26(2 3/8IF) 3 3/8 (85.7) 1 3/4 (44.5)(60.3) EU X95 *NC26(2 3/8IF) 3 3/8 (85.7) 1 3/4 (44.5)
EU G105 *NC26(2 3/8IF) 3 3/8 (85.7) 1 3/4 (44.5)
2 7/8 10.40 0.362 (9.19) 2.151 (54.6) EU E75 *NC31(2 7/8IF) 4 1/8 (104.8) 2 1/8 (54.0)(73.0) EU X95 *NC31(2 7/8IF) 4 1/8 (104.8) 2 (50.8)
EU G105 *NC31(2 7/8IF) 4 1/8 (104.8) 2 (50.8)EU S135 *NC31(2 7/8IF) 4 3/8 (111.1) 1 5/8 (41.3)
3 1/2 9.50 0.254 (6.45) 2.992 (76.0) EU E75 *NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)3 1/2 13.30 0.368 (9.35) 2.764 (70.2) EU E75 *NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)
(88.9) EU E75 NC38(3 1/2IF) 4 3/4 (120.7) 2 9/16 (65.1)EU X95 *NC38(3 1/2IF) 5 (127.0) 2 9/16 (65.1)EU G105 NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)EU G105 NC38(3 1/2IF) 4 3/4 (120.7) 2 9/16 (65.1)EU G105 NC38(3 1/2IF) 5 (127.0) 2 11/16 (68.3)EU G105 *NC38(3 1/2IF) 5 (127.0) 2 7/16 (61.9)EU S135 NC38(3 1/2IF) 4 3/4 (120.7) 2 9/16 (65.1)EU S135 NC38(3 1/2IF) 5 (127.0) 2 7/16 (61.9)EU S135 *NC38(3 1/2IF) 5 (127.0) 2 1/8 (54.0)
3 1/2 15.50 0.449 (11.4) 2.602 (66.1) EU E75 NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)EU E75 NC38(3 1/2IF) 4 3/4 (120.7) 2 9/16 (65.1)EU E75 *NC38(3 1/2IF) 5 (127.0) 2 9/16 (65.1)EU X95 NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)EU X95 NC38(3 1/2IF) 4 3/4 (120.7) 2 9/16 (65.1)EU X95 NC38(3 1/2IF) 5 (127.0) 2 9/16 (65.1)EU X95 *NC38(3 1/2IF) 5 (127.0) 2 7/16 (61.9)EU G105 NC38(3 1/2IF) 4 3/4 (120.7) 2 11/16 (68.3)EU G105 NC38(3 1/2IF) 5 (127.0) 2 9/16 (65.1)EU G105 NC38(3 1/2IF) 5 (127.0) 2 7/16 (61.9)EU G105 *NC38(3 1/2IF) 5 (127.0) 2 1/8 (54.0)EU G105 NC38(3 1/2IF) 5 (127.0) 2 7/16 (61.9)EU S135 *NC40( 4 FH) 5 1/2 (139.7) 2 1/4 (57.2)
4 14.00 0.330 (8.38) 3.340 (84.8) IU E75 *NC40( 4 FH) 5 1/4 (133.4) 2 13/16 (71.4)(101.6) IU X95 *NC40( 4 FH) 5 1/4 (133.4) 2 11/16 (68.3)
IU G105 NC40( 4 FH) 5 1/4 (133.4) 2 7/16 (61.9)IU G105 *NC40( 4 FH) 5 1/2 (139.7) 2 7/16 (61.9)IU S135 *NC40( 4 FH) 5 1/2 (139.7) 2 7/16 (61.9)
EU E75 *NC46( 4 IF) 6 (152.4) 3 1/4 (82.6)EU X95 *NC46( 4 IF) 6 (152.4) 3 1/4 (82.6)EU G105 *NC46( 4 IF) 6 (152.4) 3 1/4 (82.6)EU S135 *NC46( 4 IF) 6 (152.4) 3 (76.2)
4 1/2 13.75 0.271 (6.88) 3.958 (100.5) IU E75 *NC46( 4 IF) 6 (152.4) 3 3/8 (85.7)4 1/2 16.60 0.337 (8.56) 3.826 (97.2) IEU E75 *NC46( 4 IF) 6 1/4 (158.8) 3 1/4 (82.6)
(114.3) IEU E75 NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)IEU X95 NC46( 4 IF) 6 1/4 (158.8) 3 1/4 (82.6)IEU X95 *NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)IEU G105 NC46( 4 IF) 6 1/4 (158.8) 3 1/4 (82.6)IEU G105 *NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)IEU S135 NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)IEU S135 *NC46( 4 IF) 6 1/4 (158.8) 2 3/4 (69.9)
4 1/2 20.00 0.430 (10.92) 3.640 (92.5) IEU E75 *NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)(114.3) IEU X95 NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)
IEU X95 *NC46( 4 IF) 6 1/4 (158.8) 2 3/4 (69.9)IEU G105 NC46( 4 IF) 6 1/4 (158.8) 3 (76.2)IEU G105 *NC46( 4 IF) 6 1/4 (158.8) 2 1/2 (63.5)IEU S135 *NC46( 4 IF) 6 1/4 (158.8) 2 1/4 (57.2)
4 1/2 13.75 0.271 (6.88) 3.958 (100.5) EU E75 NC50( 4 1/2 IF) 6 5/8 (168.3) 3 7/8 (98.4)4 1/2 16.60 0.337 (8.56) 3.826 (97.2) EU E75 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 3/4 (95.3)
(114.3) EU X95 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 3/4 (95.3)EU G105 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 3/4 (95.3)EU S135 NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/4 (82.6)EU S135 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/2 (88.9)
Note) * TJ Connection specified by API Spec 7
14
Combination of Drill Pipe and Tool Joint (Continued)Nominal Drill Pipe Tool JointOD Weight Wall Thickness ID UPSET GRADE Connection OD IDin(mm) lbs in (mm) in (mm) STYLE in (mm)
4 1/2 20.00 0.430 (10.92) 3.640 (92.5) EU E75 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 5/8 (92.1)(114.3) EU X95 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/2 (88.9)
EU G105 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/2 (88.9)EU S135 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 (76.2)
5 19.50 0.362 (9.19) 4.276 (108.6) IEU E75 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 3/4 (95.3)(127.0) IEU E75 NC50( 4 1/2 IF) 6 3/8 (161.9) 3 1/2 (88.9)
IEU X95 NC50( 4 1/2 IF) 6 3/8 (161.9) 3 3/4 (95.3)IEU X95 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/2 (88.9)IEU X95 NC50( 4 1/2 IF) 6 1/2 (165.1) 3 1/2 (88.9)IEU G105 NC50( 4 1/2 IF) 6 3/8 (161.9) 3 3/4 (95.3)IEU G105 NC50( 4 1/2 IF) 6 3/8 (161.9) 3 1/2 (88.9)IEU G105 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/4 (82.6)IEU S135 NC50( 4 1/2 IF) 6 3/8 (161.9) 3 1/4 (82.6)IEU S135 NC50( 4 1/2 IF) 6 1/2 (165.1) 3 (76.2)IEU S135 *NC50( 4 1/2 IF) 6 5/8 (168.3) 2 3/4 (69.9)
5 25.60 0.500 (12.7) 4.000 (101.6) IEU E75 *NC50( 4 1/2 IF) 6 5/8 (168.3) 3 1/2 (88.9)(127.0) IEU X95 *NC50( 4 1/2 IF) 6 3/8 (161.9) 3 (76.2)
IEU G105 *NC50( 4 1/2 IF) 6 3/8 (161.9) 2 3/4 (69.9)
5 19.50 0.362 (9.19) 4.276 (108.6) IEU E75 *5 1/2FH 7 (177.8) 3 3/4 (95.3)(127.0) IEU X95 *5 1/2FH 7 (177.8) 3 3/4 (95.3)
IEU G105 *5 1/2FH 7 (177.8) 3 3/4 (95.3)IEU S135 *5 1/2FH 7 1/4 (184.2) 3 1/4 (82.6)
5 1/2 21.90 0.361 (9.17) 4.778 (121.4) IEU E75 *5 1/2FH 7 (177.8) 4 (101.6)(139.7) IEU X95 *5 1/2FH 7 (177.8) 3 3/4 (95.3)
IEU G105 *5 1/2FH 7 1/4 (184.2) 3 1/2 (88.9)IEU S135 *5 1/2FH 7 1/2 (190.5) 3 (76.2)
5 1/2 24.70 0.415 (10.54) 4.670 (118.6) IEU E75 *5 1/2FH 7 (177.8) 4 (101.6)(139.7) IEU X95 *5 1/2FH 7 1/4 (184.2) 3 1/2 (88.9)
IEU G105 *5 1/2FH 7 1/4 (184.2) 3 1/2 (88.9)IEU S135 *5 1/2FH 7 1/2 (190.5) 3 (76.2)
6 5/8 25.20 0.330 (8.38) 5.965 (151.5) IEU E75 *6 5/8FH 8 (203.2) 5 (127.0)(168.3) IEU X95 *6 5/8FH 8 (203.2) 5 (127.0)
IEU G105 *6 5/8FH 8 1/4 (209.6) 4 3/4 (120.7)IEU S135 *6 5/8FH 8 1/2 (215.9) 4 1/4 (108.0)
6 5/8 27.20 0.362 (9.19) 5.901 (149.9) IEU E75 *6 5/8FH 8 (203.2) 5 (127.0)(168.3) IEU X95 *6 5/8FH 8 1/4 (209.6) 4 3/4 (120.7)
IEU G105 *6 5/8FH 8 1/4 (209.6) 4 3/4 (120.7)IEU S135 *6 5/8FH 8 1/2 (215.9) 4 1/4 (108.0)
Note) * TJ Connection specified by API Spec 7
15
Tool Joint Dimensions for Grades E75, X95, G105, and S135 Drill Pipe1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tool SIZE Nominal Grade OD ID of Bevel Total Pin Box Combined Dia. Of Dia. Of TorsionalJoint Weight of Pin Pin Dia. Length Tong Tong Length Pin at Box at Ratio PinDesig- & Box of Pin TJ Pin Space Space of Pin Elevator Elevator tonations & Box & Box Upset Upset Drill Pipe
in lb/ft in in in in in in in in inD D d DF LP LPB LB L DPE DTE
NC26(2 3/8IF) 2 3/8 EU 6.65 E75 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 1.10X95 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 0.87
G105 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 0.79
NC31(2 7/8IF) 2 7/8 EU 10.40 E75 4 1/8 2 1/8 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 1.03X95 4 1/8 2 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.90
G105 4 1/8 2 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.82S135 4 3/8 1 5/8 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.82
NC38(3 1/2IF) 3 1/2 EU 9.50 E75 4 3/4 3 4 37/64 11 1/2 8 10 1/2 18 1/2 3 7/8 3 7/8 0.91
NC38(3 1/2IF) 3 1/2 EU 13.30 E75 4 3/4 2 11/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.98X95 5 2 9/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.87
G105 5 2 7/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.86S135 5 2 1/8 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.80
3 1/2 EU 15.50 E75 5 2 9/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.97X95 5 2 7/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.83
G105 5 2 1/8 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.90
NC40(4FH) 3 1/2 EU 15.50 S135 5 1/2 2 1/4 5 1/64 11 1/2 7 10 17 3 7/8 3 7/8 0.874 EU 14.00 E75 5 1/4 2 13/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 1.01
X95 5 1/4 2 11/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.86G105 5 1/2 2 7/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.93S135 5 1/2 2 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.87
NC46(4IF) 4 EU 14.00 E75 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.43X95 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.13
G105 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.02S135 6 3 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 0.94
4 1/2 IU 13.75 E75 6 3 3/8 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.204 1/2 IEU 16.60 E75 6 1/4 3 1/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.09
X95 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.01G105 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.91S135 6 1/4 2 3/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.81
4 1/2 IEU 20.00 E75 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.07X95 6 1/4 2 3/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.96
G105 6 1/4 2 2/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.96S135 6 1/4 2 1/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.81
NC50(41/2IF) 4 1/2 EU 13.75 E75 6 5/8 3 7/8 6 1/16 11 1/2 7 10 17 5 5 1.234 1/2 EU 16.60 E75 6 5/8 3 6/8 6 1/16 11 1/2 7 10 17 5 5 1.23
X95 6 5/8 3 6/8 6 1/16 11 1/2 7 10 17 5 5 0.97G105 6 5/8 3 6/8 6 1/16 11 1/2 7 10 17 5 5 0.88S135 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.81
4 1/2 EU 20.00 E75 6 5/8 3 5/8 6 1/16 11 1/2 7 10 17 5 5 1.02X95 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.96
G105 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.86S135 6 5/8 3 6 1/16 11 1/2 7 10 17 5 5 0.87
5 IEU 19.50 E75 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.92X95 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
G105 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.89S135 6 5/8 2 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
5 IEU 25.60 E75 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86X95 6 5/8 3 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
G105 6 5/8 2 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.87
Drill Pipe Tool Joint
16
Tool Joint Dimensions for Grades E75, X95, G105, and S135 Drill Pipe (Continued)1 2 3 4 5 6 7 8 9 10 11 12 13 14
Tool SIZE Nominal Grade OD ID of Bevel Total Pin Box Combined Dia. Of Dia. Of TorsionalJoint Weight of Pin Pin Dia. Length Tong Tong Length Pin at Box at Ratio PinDesig- & Box of Pin TJ Pin Space Space of Pin Elevator Elevator tonations & Box & Box Upset Upset Drill Pipe
in lb/f t in in in in in in in in inD D d DF LP LPB LB L DPE DTE
5 1/2 FH 5 IEU 19.50 E75 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.53X95 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.21G105 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.09S135 7 1/4 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.98
5 IEU 25.60 E75 7 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 1.21X95 7 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.95G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.99S135 7 1/4 3 1/4 6 23/32 13 8 10 18 5 1/8 5 1/8 0.83
5 1/2 IEU 21.90 E75 7 4 6 23/32 13 8 10 18 5 11/16 5 11/16 1.11X95 7 3 3/4 6 23/32 13 8 10 18 5 11/16 5 11/16 0.98G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 1.02S135 7 1/2 3 7 3/32 13 8 10 18 5 11/16 5 11/16 0.96
5 1/2 IEU 24.70 E75 7 4 6 23/32 13 8 10 18 5 11/16 5 11/16 0.99X95 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 1.01G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 0.92S135 7 1/2 3 7 3/32 13 8 10 18 5 11/16 5 11/16 0.86
6 5/8 FH 6 5/8 IEU 25.20 E75 8 5 7 45/64 13 8 11 19 6 15/16 6 15/16 1.04X95 8 5 7 45/64 13 8 11 19 6 15/16 6 15/16 0.82G105 8 1/4 4 3/4 7 45/64 13 8 11 19 6 15/16 6 15/16 0.87S135 8 1/2 4 1/4 7 45/64 13 8 11 19 6 15/16 6 15/16 0.86
6 5/8 IEU 27.70 E75 8 5 7 45/64 13 8 11 19 6 15/16 6 15/16 0.96X95 8 1/4 4 3/4 7 45/64 13 8 11 19 6 15/16 6 15/16 0.89G105 8 1/4 4 3/4 7 45/64 13 8 11 19 6 15/16 6 15/16 0.81S135 8 1/2 4 1/4 7 45/64 13 8 11 19 6 15/16 6 15/16 0.80
Tool Joint, Taper Shoulder, and square Shoulder
Drill Pipe Tool Joint
Notes:1. See Figure.2. All dimensions are in inches.3. Neck diameters (DPE and DT E ) and inside diameters (d) of tool joints prior to w elding are at manufacturer's option. The above table specifiesdimensions after f inal machining of the assembly.4. Appendix I contains dimensions of obsolescent connections and for square elevator shoulders.a The tool joint designation indicates the size and style of the applicable connection.b Nominal w eights, threads and couplings are show n for the purpose of identif ication in ordering.c The inside diameter does not apply to box members, w hich are optional w ith the manufacturer.d Length of pin thread reduced to 3 1/2 inches ( 1/2 inch short) to accommodate 3 inch ID.
17
Product Dimensions Rotary Shouldered Connections1 2 3 4 5 6 7 8 9 10 11 12
ConnectionNumberor Size
ThreadForm
ThreadsPerInch
Taper,InchesPerFootonDiameter
PitchDiameterof Threadat GaugePoint
LargeDiameterof Pin
Diameterof Flaton Pin±1/64
SmallDiameterof Pin
Lengthof Pin
+0－1/8
MinimumLengthof BoxThreads
Depthof Box
+3/8－0
BoxCounter-bore+1/32－1/64
C DL DLF Ds LPC LBT LBC QcNumber (NC) Style
NC26 V-0.038R 4 2 2.66800 2.876 2.750 2.376 3 3 1/8 3 5/8 2 15/16NC31 V-0.038R 4 2 3.18300 3.391 3.266 2.808 3 1/2 3 5/8 4 1/8 3 29/64NC38 V-0.038R 4 2 3.80800 4.016 3.891 3.349 4 4 1/8 4 5/8 4 15/64NC40 V-0.038R 4 2 4.07200 4.280 4.156 3.530 4 1/2 4 5/8 3 1/8 4 11/32NC46 V-0.038R 4 2 4.62600 4.834 4.709 4.084 4 1/2 4 5/8 5 1/8 4 29/32NC50 V-0.038R 4 2 5.04170 5.250 5.135 4.500 4 1/2 4 5/8 5 1/8 5 5/16
Regular (REG) Style2 3/8 REG V-0.040 5 3 2.36537 2.625 2.515 1.875 3 3 1/8 3 5/8 2 11/162 7/8 REG V-0.040 5 3 2.74037 3.000 2.890 2.125 3 1/2 3 5/8 4 1/8 3 1/163 1/2 REG V-0.040 5 3 3.23987 3.500 3.390 2.562 3 3/4 3 7/8 4 3/8 3 9/164 1/2 REG V-0.040 5 3 4.36487 4.625 4.515 3.562 4 1/4 4 3/8 4 7/8 4 11/165 1/2 REG V-0.050 4 3 5.23402 5.520 5.410 4.333 4 3/4 4 7/8 5 3/8 5 37/646 5/8 REG V-0.050 4 2 5.75780 5.992 5.882 5.159 5 5 1/8 5 5/8 6 1/16
Full-Hole (FH) Style5 1/2 FH V-0.050 4 2 5.59100 5.825 -- 4.992 5 5 1/8 5 5/8 5 29/32
Equivalent ConnectionsNumber Connection Equivalent ConnectionNC26 2-3/8 IFNC31 2-7/8 IFNC38 3-1/2 IFNC40 4 FHNC46 4 IFNC50 4-1/2 IF
18
Product Thread Dimensions Rotary Shouldered Connections1 2 3 4 5 6 7 8 9 10 11
Widhth of Flat
ThreadForm Pitch Taper
ReferenceThreadHeight
NotTruncated
ReferenceThread
Truncated
ReferenceRoot
Truncationsrn = srs
ReferenceCrest
Truncation
CrestF cn
= F cs
RootF rn
= F rs
RootRadius
Radius atThreadCorners
Formr
p in./ft H hn = hs frn = frs fcn = fcs rrn = rrs ± 0.008V - 0.038R 0.250000 2 0.216005 0.121844 0.038000 0.056161 0.065 -- 0.038 0.015V - 0.038R 0.250000 3 0.215379 0.121381 0.038000 0.055998 0.065 -- 0.038 0.015V - 0.040 0.250000 3 0.172303 0.117842 0.020000 0.034461 0.040 -- 0.020 0.015V - 0.050 0.250000 3 0.215379 0.147303 0.025000 0.043076 0.050 -- 0.025 0.015V - 0.050 0.250000 2 0.216005 0.147804 0.025000 0.043201 0.050 -- 0.025 0.015
V-0.038 Product Thread Form
V-0.040 and V-0.050 Product Thread Form
19
Optional SpecificationOptional specification can be applied upon the request of purchasing order specification.HB, Break-in, Internal coating and others are available at PMC group facilities or outside facilities.
HB (Hard Banding) ARNCO 100XT, ARNCO 200XT, ARNCO300XT and others hard banding are available upon request.
Break-in (Make and Break) Make and break specification are available upon required.PMC Standard Make and Break procedure is that three times Make and break shall be applied with optimum torque or less.
Internal CoatingInternal Coasting also are available upon purchasing specification. Internal coating TK34 (TuboScope) or others shall be applied at qualified internal coating plants.
Cold work (Cold Rolling)Cold work operations are available upon the purchasing specification, which apply cold work on the root thread of Tool Joint Connections after threading.
PMDS Technical and Repair ServicesTechnical services concerned with drill pipes and PMDS Double Shoulder connection are availableanytime upon request.Repair technical services for PMDS (Double Shoulder) can be available at anywhere upon required.
【APPENDIX Equation and Formula】(1)Pipe body yield strengthPy = 0.7854 x (D2-d2) x YSPy : Pipe Body Yield Strength( kips) YS :Minimum Specified Yield Strength(psi)D: Outside Diameter(,inches) d:Internal Diameter(inches)(2).MIYP(Minimum Internal Yield Pressure or Burst PressureMinimum Internal Yield Pressure(MIYP)P = 0.875 x 2 x YS x t / DYS :Minimum Specified Yield Strength(psi) D: Outside Diameter(,inches) t:Wall thickness(3) Collapse API BUL 5C3 Formula and Equation 【 Conversion Formula 】 Length, Square, Pressure, Stress, Weight1 inch(in)=25.4mm 1 square inch(sq.in.)=645.16 sq.mm1 foot(ft)=0.3048mm 1 pound(lb)=0.454 Kg 1Kgf=9.80665N1Kgf/Cm2=9.80665*10-2 MPa1psi(pound per square inch=0.0703 Kg/Cm2=0.006895 Megapascals (MPa) 1 Kg-M=0.138 ft-lbs 1 pound per foot(lb/ft)=1.4895 Kg/m1 foot-pound(ft-lbs)=1.355818 Joules(J) for impact energy=1.355818 (N-m) for torque 1 Ksi=0.703 Kg/mm2 1 psi=0.0703 Kg/Cm2【Temperature】Temperature conversion table ﾟC=5/9*(ﾟF-32) ﾟC=(ﾟF-32)/1.8 ﾟF=1.8ﾟC+32SI Unit Length m Weight kg【Time】 s Frequency Hz(s-1)【Load】(NewtonN(kg-m/s2) dyn(=10-5N=10μN) kgf=9.80665Pressure Stress(Pascal） Pa(N/m2=kg･m-1･s-1)kgf/mm2(=9.80665MPa)、bar(=105Pa=0.1MPa)、Torr(=133.32Pa)、atm(=101325Pa)【Thermal Expansion ratio of Carbon Steel】1.2x10-5/℃ 6.6x10-5/°F【Density of Carbon Steel】7.85 g/cubic cm 0.283 lb/cubic inchesUnit weight of pipe W(kg/m) = 0.02466 x t ( D - t ) D: Outside Diameter(mm) t:Wall thickness(mm)
20
PetroMaterials CorporationHead Office
1-3-2 Iidabashi, Chiyoda-ku Tokyo 102-0072, Japan
Tel:81-3-3237-1001 Fax:81-3-3237-8551
E-Mail : [email protected]
Wakayama Works
2021-8 Saikazaki, Wakayama-shi, Wakayama 641-0062, Japan
Tel:81-73-498-8820 Fax:81-73-446-8370
E-Mail : [email protected]
PetroMaterials Group
PetroMaterials USA, INC
1330 Post Oak Blvd Suite 1888, Houston TX 77056, USA
Tel:1-713-871-8860 Fax:1-713-871-8865
EiMail : [email protected]
PetroMaterials(Cangzhou) Co,.Ltd
No 102 Donghua Road, Qing Country, Hebei Province, 062658, China
Tel:86-317-431-8901 Fax:86-317-402-4588
E-Mail : [email protected]
Beijing China Star Jiasheng Trading Co,.Ltd
18th Flr. No222 Bldg, Nanhu Xiyuan, Wangjing, Chaoyang District, beijing 100102, China
Tel:86-10-8476-5567 Fax:86-10-8476-5938
E-Mail : [email protected]
PMC Drill Pipe Catalogue edited April 2012 Rev6
