Upload
phamduong
View
258
Download
3
Embed Size (px)
Citation preview
Pneumatic Connector, Tubing, and Accessory Catalog
Pneumatic Quick Connectors
Plastic Tubing and Adaptors
Plumbing Tools
Tube Connectors and Manifolds
ContentsPlastic Tubing 1
Plastic Tubing Specifications 2
Tubing Clamps and Sealant 3
Tubulations and Specialized Tubing Tools 4
Specialized Tubing Tools 5
Tube/Pipe Connectors 6
Tube Connectors 7
Pneumatic Connectors (100 PSI) 8
Pneumatic Connectors- 24C, 48C, and 64C 9
Pneumatic Connectors- 24C, 48C, and 64C 10
Pneumatic Connectors- Model D (300 PSI) 11
Pneumatic Connectors- ZOC (500 PSI) 12
High Pressure Model L Connector (1500 PSI) 12
Rectangular Connectors- RC2 (300PSI) 13
Rectangular Pattern Connectors(150-500 PSI)* 14
Pneumatic Manifolds (500PSI) 15
Quick Couplers 16
Pneumatic Calibration/Purge Valve 17
1
Plastic TubingScanivalve stocks clear plastic tubing for many applications including:
• Wind Tunnel Tests
• Flight Tests
• Gas Turbine and Diesel Tests
• R&D and Laboratory Use
• Industrial Test
Available stock materials are urethane, nylon, vinyl and Teflon.Sizesareavailabletofitover.031inchthrough.125inchtubulations.Tubingissoldbythespool.
Nylon TubingThistubingisratedat110°C*andisidealforgasturbinetesting.Itfitssnuglyoverourstainlesssteeltubulationsandcanbeusedwithouthelicaltubingclampsto100psi,orto1500psi(burstpressure.063)withhelicaltubingclampsandsealant.Asaspecialorder,NYLN-125HWcanbeorderedinavarietyofcolors.
Teflon Tubing - ClearThischemically inert tubing isratedat260°C*. Itusesthesamehelicaltubingclampsasthenylontubing.Size.063Teflontubinghasarecommendedworkingpressureof500psiat21°C.
Tubing Material Sizes Typically Stocked
For use on: Vinyl Nylon 6/6 (Clear) Urethane Teflon (PTFE).031Inch(0.79mm)O.D.SStubulation URTH-031(I.D.)
.040Inch(1.02mm)O.D.SStubulation VINL-040(I.D.) NYLN-040†(I.D.) URTH-040(I.D.) TFLN-040(I.D.)
.063Inch(1.59mm)O.D.SStubulation VINL-063(I.D.) NYLN-063(I.D.) URTH-063(I.D.) TFLN-063(I.D.)
.125Inch(3.18mm)O.D.SStubulation VINL-125**†(I.D.) NYLN-125HW(I.D.) TFLN-125**(I.D.)
Vinyl Tubing - ClearThistough,lightweighttubingcarriesa65°C*rating.Itfitssnugly over our stainless steel tubulations, and can be usedwithorwithoutourhelicaltubingclamps.Itcanbeusedforshortdurationtestsupto30psiwithouthelicalclamps. Size .063 vinyl tubing has a recommendedworkingpressureof90psiat21°C.
Urethane Tubing - ClearUrethanetubinghasatemperatureratingof95°C*.Itisidealfor lowpressuretests inwindtunnelmodels.Thetubing is extremely flexible, resilient, and resistant tokinking.Itfitssnuglyoverourstainlesssteeltubulationsandisresistanttoweather,tearing,abrasionandimpact.Size.063urethanehasarecommendedworkingpressureof100psiat21°C.
*Temperatureratingsarereferencedtoatmosphericpressureof14.7psianominal.**Donotusethistubinginvacuumapplications† Indicates special orderO.D.=OutsideDiameter;I.D.=InsideDiameter
2
Plastic Tubing Specifications
Part N
umber
I.D.
Inches (m
m)
O.D
. Inches (m
m)
Recom
mended
Working
Pressure at 21°C
PSI (kPa)
Burst
Pressure at 21°C
PSI (kPa)
Burst
Pressure at 40°C
PSI (kPa)
Max
Operating
Temperature
°C (°F)
Min
Operating
Temperature
°C (°F)
Burst Pressure
at Max O
perating Tem
perature PSI (kPa)
Minim
um
Bending
Radius
Inches(mm
)
NYLN
-063.057(1.45)
.089(2.26)
1000(6895)1500
(10340)1000(6895)
110(225)-65(-85)
800(5515)1.25(31.75)
NYLN
-125H
W.117(2.97)
.187(4.75)
600(4135)1000(6895)
750(5170)
100(212)-65(-85)
500(3448)1.75(44.45)
TFLN-040
.036(0.91)
.068(1.73)
500(3448)700
(4825)575
(3965)260(500)
-70(-94)70(480)
0.50(12.7)
TFLN-063
.053(1.35)
.086(2.18)
500(3448)700
(4825)575
(3965)260(500)
-70(-94)70(480)
0.75(19.05)
TFLN-125
.106(2.69)
.138(3.51)
200(1380)350
(2415)240
(1655)175(350)
-70(-94)50(345)
1.25(31.75)
UR
TH-031
.027(.69)
.051(1.30)
125(860)375
(2585)160(1100)
95(200)-65(-85)
70(480)0.188(4.78)
UR
TH-040
.034(.86)
.066(1.68)
125(860)350
(2415)150
(1035)95(200)
-65(-85)70(480)
0.25(6.35)
UR
TH-063
.054(1.37)
.086(2.18)
100(690)250
(1725)150
(1035)95(200)
-65(-85)50(345)
0.25(6.35)
VINL-040
.034(.86)
.066(1.68)
100(690)400
(2760)200
(1380)65(150)
-40(-40)35(240)
0.32(8.12)
VINL-063
.054(1.37)
.086(2.18)
90(620)250
(1725)160(1100)
65(150)-40(-40)
35(240)0.50(12.7)
VINL-125
.106(2.69)
.138(3.51)
40(275)175
(1205)50(345)
65(150)-40(-40)
35(240)0.63(16.0)
3
Tubing Clamps and SealantHelical Tubing ClampsThese tubing clamps are used to clamp plastic tubing onto the stainless steel tubulations which extend from our Scanivavle modules and line of connectors, reducers, andmanifolds.The brass clamps aredesignedtofitoverourvinylandurethanetubingon the tubulation.Thestainless steel clampsaredesigned to fit over our nylon andTeflon tubing.Clamps, tools, and tubing sizes are based onScanivalve nominal stainless steel tubulation outside diameter.Actualdimensionsofclamps,tools,andtubingmayvary.
To Order, Specify Brass Stainless Steel
S t a i n l e s s S t e e l Tubulation Size:
Scanivalve Tubing:
For use on Vinyl or Urethane tubing, #:
Scanivalve Tubing: For use on nylon or Teflon tubing, #:
.040Inch(1.02mm)O.D. VINL-040 CLMP-040 NYLN-040 NYCLMP-040
.063Inch(1.59mm)O.D. VINL-063 CLMP-063 TFLN-063orNYLN-063 NYCLMP-063
.125Inch(3.18mm)O.D. VINL-125 CLMP-125 TFLN-125NYLN-125HW
NYCLMP-125NYCLMP-125HW
Pipe Sealant The use of sealant with the helical tubing clamps is recommended for pressures above 250 psi. Brushthe sealant lightly over the bulge of the stainless steel tubulation, then drive the tubing and clamp onto the tubulation.Allow24hourstofullycure.Toorder,specifyasScanivalve#SLNT2.
4
Bulged Stainless Steel TubulationsScanivalve manufactures a complete line of bulged stainless steeltubulations.Thetubingisbulgedononeendtoensureleaktightconnections.Scanivalve’splastictubingandthebrassorstainlesssteelhelicaltubingclampsfitoverthisbulgeforafirmgrip.Itisrecommendedthatthecustomershouldepoxythenon-bulgedendintohisequipment.Thetubulations aremanufactured in lengths between 0.55inchesand8.0inches.
Tubing Push-on ToolThistoolisdesignedforusewithvinyl,nylon,Teflonandurethanetubing.Thetoolisusedbygraspingthetubingadjacenttotheclamp(aftertheclamphasbeenscrewedontothetubing)andpushingitontoourstandardstainlesssteel tubulations. Itcanalsobeused topushon tubingwithoutclamps.Clamps,tools,andtubingsizesarebasedon Scanivalve nominal stainless steel tubulation outside diameter.Actualdimensionsofclamps,tools,andtubingmayvary.
Tubulations and Specialized Tubing Tools
PUSH
TPOTL-XXX
To order, specify:Scanivalve #: Standard Lengths (Inches) Tubulation Size
TUBN-040(SpecifyLength) .55,.75,1.0,2.0,3.0,4.0 .040Inch(1.02mm)O.D.TUBN-063(SpecifyLength) .55,.75,1.0,2.0,3.0,4.0 .063Inch(1.59mm)O.D.TUBN-125(SpecifyLength) .75,1.0,2.0,3.0,4.0 .125Inch(3.18mm)O.D.
To order, specify Scanivalve#TPOTL-040TPOTL-063TPOTL-125
TPOTL-125HW ModelTubulationSize
5
NYCLMP Screw-Back ToolThenylonscrew-backtoolisdesignedtomanuallyinstallthehelicalclampsoverthebulgeofthetubulation.Thescrew-back tool isslippedonto the tubingandused topushtheNYCLMPtowardsthetubulationbulgeuntilthebulgeisengaged.Byrotatingthescrew-backtoolafewrevolutions, itwill screw theNYCLMPover the bulge.Continueturningthehandleonthescrew-backtooluntiltheclampislocated80%overthebulge(onthesideofthebulgeclosesttotheterminationofthetubing).
The versatile long-handled version, NCSBTL3, isespeciallysuited for installing theNYCLMPs inhard toreachareas.
Theshort-handledversion,NCSBTL2isusedonpanelswherespaceisavailable.
Clamps,tools,andtubingsizesarebasedonScanivalvenominalstainlesssteeltubulationoutsidediameter.Actualdimensionsofclamps,tools,andtubingmayvary.
Specialized Tubing Tools
To order, specify Scanivalve#NCSBTL2-063NCSBTL2-125
NCSBTL2-125HWNCSBTL3-040NCSBTL3-063NCSBTL3-125
NCSBTL3-125HW ModelTubulationSize
Note: WhenHeavyWalled(HW)tubingisused,specifytheHWScrew-backtoollistedinthetable.
6
Tube/Pipe ConnectorsPipe ConnectorsThese connectors are useful to connect small diameter plastic tubingwith larger 1/8 inch and 1/4 inchNPTthreadedpipe.SizesaregovernedbytheNPTstandard.To order, specify: Item: Scanivalve#:
1/8”MPTFittingtoTubeConnetor
TC1/8MPT-031R*TC1/8MPT-040RTC1/8MPT-063RTC1/8MPT-125R
1/4”MPTFittingtoTubeConnector
TC1/4MPT-031R*TC1/4MPT-040RTC1/4MPT-063RTC1//4MPT-125R
1/8”FPTFittingtoTubeConnector
TC1/8FPT-031R*TC1/8FPT-040RTC1/8FPT-063RTC1/8FPT-125R
1/4”FPTFittingtoTubeConnector
TC1/4FPT-031R*TC1/4FPT-040RTC1/4FPT-063RTC1/4FPT-125R
NPTThread MPT-Male TubulationSize FPT-Female Size
*.031inchtubulationsdonothaveabulge
Tube Adaptors for X-Lok Compression Fittings - 1500 psiScanivalvehasdesignedeasy-to-usetubeadaptorsthatfitX-Lokfittings.Themainfunctionofthesetubeadaptorsis to reduce1/8or1/4 inchcompressionfittings toourstainlesssteeltubulationsorother.1/4 Inch (6mm) X-Lok
reduced to:1/8 Inch (3mm) X-Lok
reduced to:Cap Cap.040 .040.063 .063.083 .125.125
ThesefittingscanbehandtightenedtoformaleaktightO-ring seal.No tools are required.The tube adaptormaterial is brass or stainless steel with brass or stainless steeltubulations.
MPT Shown
FPT Shown
7
To order, specify: Item: Scanivalve #: Type: Design:TubeConnector“X”Design TC040X(specifycolor)
TC063XTC125X “X”
TubeConnector“T”Design TC040T(specifycolor)TC063TTC125T
“T”
TubeConnector“I”Design”(for color identification ofpressurelines)
TC040I(specifycolor)TC063ITC125I
“I”
TubeConnector“R”Design* TC040-031R(specifycolor)TC063-031RTC063-040RTC125-031RTC125-040RTC125-063RTC187-125RTC250-063R
“R”
TubeConnector“P”Design TC040P(specifycolor)TC063PTC125P “P”
Tube Tubulation DesignConnectorSizeType
*Twosizesrequiredfor“R”Connector
Tube ConnectorsTheseconnectorsaremadebyaffixingstainlesssteeltubingintocoloredanodizedaluminumblocks.Thetubeconnectors are optionally available with a brass body with soldered stainless steel tubing when an extra safety factorisrequiredtoensurenoleaksduetohandling.Alltubulationsarebulged(except.031and.250)forusewithScanivalveHelicalTubingClamps.
Available Colors: CLR(clear),GLD(gold),BLK(black),RED,GRN(green),andBLU(blue).Ifacolorisnotspecifiedatthetimeoforder,Scanivalvewillsupplyacolorbaseduponavailability.Sizes Available: .031(nobulge),.040,.063,.125,.250(nobulge)inchesO.D.Alltubulationsizecombinationsareavailable.
8
Pneumatic Connectors (100 PSI)Quick DisconnectThis family of connectors are ideal formaking quickdisconnectsattestbreakpointswherespaceisimportant.These connectors have the highest channel density per connectorofalltheScanivalveroundconnectors.Aflatgasket is shipped with the male connector for providing anairtightseal.Blankingcapsareavailableforsomeconnectormodelsasshowninthechartbelow.
Dimensions: Inches (mm) Number of Tubulations Connector Diameter A B Tubulation Dimensions
19 .460(11.7) .760(19.3) .790(20.1) .040(1.02)O.D.31 .560(14.2) .540(13.7) .580(14.7) .040(1.02)O.D.31 .900(22.9) .690(17.6) .765(19.4) .063(1.59)O.D.36 .625(15.88) 1.0(25.4) .960(24.4) .040(1.02)O.D.55 .700(17.8) .540(13.72) .565(14.4) .040(1.02)O.D.55 1.125(28.6) .690(17.53) .784(19.9) .063(1.59)O.D.
DimensionsAandBisthedistancetothelongesttube.
To order, specify: Number of Tubulations Male Connector # Female Connector # Spare Gasket # Male Cap # Female Cap #
19 19M460** 19F460** 50059-1 N/A 50013-331 31M560* 31F560* 50159-1 N/A 50013-231 31M900 31F900 50139-2 N/A N/A36 36M625** 36F625** 50778-1 N/A N/A55 55M700 55F700 50007-1 50024 50013-155 55M1.125 55F1.125 50129-1 50110-1 N/A
*Availableinpyramidconfiguration.Specifyattimeoforder.**Onlyavailableinpyramidconfiguration.
PyramidConfigurationShownAbove
MaleFemale
9
DescriptionThelineofCMconnectors,whenusedwithaCF(femaleconnector),oraCFB(femalebulkheadcon-nector),becomeidealquickdisconnectsatpressurebreakpoints.ThestainlesssteeltubulationsaredesignedtofiteitherScanivalve.063or.125tubing.A2inchretainerisavailableasanadditionaloption.
Pneumatic Connectors- 24C, 48C, and 64C
64CFB-1 64CM-1
10
Pneumatic Connectors- 24C, 48C, and 64C24C Pneumatic Connectors(500psi)
ScanCo# Description No. of Tubulations
Tubulation Size A B C D E F G Cap
24CM-1 MaleConnector 24 .125” O.D.
(3.18).86”(21.8)
.90”(22.9)
.36”(9.14) NA
24CF-1 FemaleConnector 24 .125” O.D.
(3.18)1.30”(33.0)
.86”(21.8) NA
24CFB-1FemaleBulkheadConnector
24 .125” O.D.(3.18)
1.30”(33.0)
.86”(21.8) NA
0995-070X-150B
SpareO-Rings
48C Pneumatic Connectors(500psi)ScanCo# Description No. of
TubulationsTubulation
Size A B C D E F G Cap
48CM-1 MaleConnector 48 .063” O.D.
(1.59).82”(20.8)
.82”(20.8)
.34”(8.64) NA
48CF-1 FemaleConnector 48 .063” O.D.
(1.59)1.26”(32.0)
.86”(21.8) 6386-1
48CFB-1FemaleBulkheadConnector
48 .063” O.D.(1.59)
1.13”(28.7)
.86”(21.8) 6386-1
6025 Spare Gasket
5180 OptionalGaskage
64C Pneumatic Connectors(100psi)*ScanCo# Description No. of
TubulationsTubulation
Size A B C D E F G Cap
64CM-1 MaleConnector 64 .063” O.D.
(1.59).77”(19.6)
.87”(22.1)
.34”(8.64) NA
64CF-1 FemaleConnector 64 .063” O.D.
(1.59)1.30”(33.0)
.78”(19.8) NA
64CFB-1FemaleBulkheadConnector
64 .063” O.D.(1.59)
1.17”(29.2)
.78”(19.8) NA
6305 Spare Gasket
6015 OptionalGaskage
*Canbeusedupto500psiwithgaskage.Pleaseconsultfactory.
11
Pneumatic Connectors- Model D (300 PSI)The “D”Connectorsmake ideal quickdisconnects atmodel test break points when both male and female connectors are used together. Both connectors areavailablewith48stainlesssteeltubulations.Standard“D”connectorsuseagasketandarelimitedto100psi.Forapplicationsupto300psi,agaskagecanbeusedandmustbespecifiedat the timeoforder.Maleandfemale halveswith different tubulation sizes can bemated together to act as a reducer, please consult the factoryforthisconfiguration.
To Order, Specify:48DM1/2-063
ModelDNominalTubulationNo.of ConnectorTubulationSizeTubulationsType:Length.040”(24or48)M-Male.063” F-Female FB-FemaleBulkhead FSB-FemaleSealingBulkhead
48DFB-1/2(FemaleBulkhead)
0.16” (4.06mm) DiameterHoles4each
48D8M-1/2 48DF-1/2 (Male)(Female)
SpareGasketforDConnectorPartNumber:6088
12
This high density 48 or 73 channel connector is a verypopularbulkheadquickdisconnect.Itcontainseither.063inchO.D. tubulationsor .040 inchO.D. tubulations.ThispneumaticconnectorisalsousedonourZOCTCUThermalControlUnits.Itiscapableforuseupto500psi.Maleandfemalehalveswithdifferenttubulationsizescanbematedtogether to act as a reducer, please consult the factory for thisconfiguration.
The 48L series connectors are ideal formaking quickdisconnectsattestbreakpoints.Theseconnectorsacceptstainlesssteeltubingthatislockedinplacewithasetscrew.Six clearanceholesaredrilled in theFemaleBulkheadconnector halfwhich allow8-32 screws to be used formounting.Thistubingmustbesmoothended.063”O.D.stainlesssteeltubing.
Note: Tubing supplied bycustomer must have smooth end,ororderPN:TUBN-063-X(Seepage3forreference)
Capsareavailabletoblankoffhalfoftheconnector.Tocapoff48LM,orderPN:6245-1Tocapoff48LFBorderPN:6244-1
Pneumatic Connectors- ZOC (500 PSI)
High Pressure Model L Connector (1500 PSI)
To Order, Specify:
73 ZOC M 063
No.ofModelConnectorTubulationTubesTypeSize48(.040or.063)M-Male.063O.D.73(.040or.063)F-Female.040O.D.FB-FemaleBulkheadFSB-FemaleSealingBulkhead
48LMMale
48LFB FemaleBulkhead
13
The materials of construction for these connectors are stainless steel tubulations cemented into anodizedaluminumblocks.TheyhaveacagedO-ringgasketdesignthatsealswhenconnected.
Available Colors: CLR(clear),GLD(gold),BLK(black),RED,GRN(green)andBLU(blue).Ifcolorisnotspecifiedat the time of order, Scanivalve will supply a color based onavailability.
Tubulation Sizes Available: .031(nobulge), .040, .063and.125inchesO.D.
Number of Tubes Connector Length L in Inches(mm)
81012
For Tube Diameters:.031,.040,.063 .1251.700(43.2)1.950(49.5)2.200(55.9)
2.875(73.0)3.375(85.7)3.875(98.4)
Rectangular Connectors- RC2 (300PSI)
Dimensions in Inches (mm)Tube Diameter Thickness A B (Hole Diameter) C D
.031
.041
.063.125(3.18) .250(6.35) .125(3.18) No.4Mounting
Screw 200300-02
.125 .250(6.35) .325(9.53) .140(3.56) No.6MountingScrew 20300-06
*Eachhalfoftheconnectorcanhavedifferenttubulationsize,butbodysizewillremainunchanged.
To Order, specify: Two(2)eachRC2connectorsplusagasketarerequiredtomakeoneconnectorassembly.
RC2/ 040 - 10 (GLD) RC2/ 040 - G - 10
ModelNo.ofTubesModelGasket(8,10,12 TubulationDiameterColorTubulationDiameterNo.ofTubes.031,.040,.063,.125”
14
Rectangular Pattern Connectors(150-500 PSI)*
This rectangular pattern connector is idealformakingaquickdisconnectattestbreakpoints.Itispanelmountedandcontainsstainlesssteeltubulations.The sectioned side view of the drawing shows the front half of the connector whichisnotthreaded.AlloftheholesarethreadedintheTH(threadedhalf)half.Eachsideof theconnectorcanhavedifferenttubulationsizes.O-ringsare incorporated on the threaded half (TH)connector.
Dimension Inches (mm) - Standard Connector SizeNo.ofRows
2233444445666688101012
No.ofColumns45464568101068910812101212
No.ofPx8101218162024324050364854606496100120144
Dimensions:HeightxLengthInches(mm)1.3x1.9(33.0x48.3)1.3x2.2(33.0x55.9)1.6x1.9(40.6x48.3)1.6x2.5(40.6x63.5)1.9x1.9(48.3x48.3)1.9x2.2(48.3x55.9)1.9x2.5(48.3x63.5)1.9x3.1(48.3x78.7)1.9x3.7(48.3x94.0)2.2x3.7(55.9x94.0)2.5x2.5(63.5x63.5)2.5x3.1(63.5x78.7)2.5x3.4(63.5x86.4)2.5x3.7(63.5x94.0)3.1x3.1(78.7x78.7)3.1x4.3(78.7x109.2)3.7x3.7(94.0x94.0)3.7x4.3(94.0x109.2)4.3x4.3(109.2x109.2)
To order, specify Scanivalve #:
RPC - 4R x 6T / 063F - 125THRectangularThreadedHalfpattern tubulationconnector diameter
No.ofrowsFemaleHalf of tubes tubulation diameter
No.ofcolumns of tubes
*150psifor144tubeconnector.Smalltubequantityconnectorscapableupto500psi
15
Pneumatic Manifolds (500PSI)M - Single Manifold(12tubeMaximum)
8TubeShown
12TubeShown
2M - Double Manifold(24tubeMaximum)
12TubeShown
24TubeShown
The pneumatic manifolds are available in two designs, singlemanifoldanddoublemanifold.Tubulationsizesare.040inch,.063inchand.124inchO.D.Lengthsofthemanifoldarecustomerspecifiedbasedonnumberoftubes.Themaximumnumberis12tubesforasinglemanifoldand24tubesforadoublemanifold.Customconfigurations canbeorderedwith different inlet andoutlettubesizes.Pleaseconsultthefactory.
Materials: Connector body is anodized aluminum.Tubulationsarestainlesssteel.
Available Colors: CLR(clear),BLK(black),GLD(gold),RED,BLU (blue), andGRN (green). If a color is notspecifiedattimeoforder,Scanivalvewillsupplyacolorbasedonavailability.
To order, specify Scanivalve #:Single Manifolds Double Manifolds
TC040-M3(Color) TC040-2M4(Color)TC063-M3(Color) TC063-2M4(Color)TC125-M3(Color) TC125-2M4(Color)
TubeConnectorSpecifyColor TubulationSizeNo.ofTubes
SingleManifold
TubeConnectorSpecifyColor
TubulationSizeNo.ofTubes
DoubleManifold
16
Quick CouplersQuick Coupler (Patented) Thisquickcouplerisdesignedforuseduringpressuretesting where there is a need for changing pressure inputsquickly.Theycanbeusedwithvariouslengthsof stainless steel tubingwith chamfered ends.TheQC063-2 quick coupler is capable of operating atpressuresupto1000psi.Theoperatingtemperatureis-40°Cto100°C.
Use: 1.Toconnect,pushsmoothendoftubingintocoupler.TubingissealedwithacapturedinternalO-ringandmechanically held by the collet which is initially closed byspringforce.Whenthecouplerispressureized,aninternal piston applies additional closing force to the collet.
2.To disconnect, shut off the air supply and thendepressthecollet.
Quick Coupler Designs QC-XXX-2Themodel -2 quick coupler design incorporates 2colletsinordertoacceptasteeltubulationateachend.
QC-XXX-THThemodel -THquickcouplerdesign incorporatesacolletatoneendandathreadednoseandO-Ringattheotherend.The.063versioncomeswithan8-32thread,andthe.125versionhasa1/4-28thread.
QC-XXX-TUBN-XXXThemodel-TUBNquickcouplerdesignincorporatesacolletatoneendanda.063or.125inchtubulationononeend.
TUBN-XXX-XSeeStainlessSteelTubulationsonpage3.
CAUTION: Donotpushbulgedendoftubulationintocoupler.Achamferededgeisrequired.
Ordering InformationTo order, specify Scanivalve #: .063 O.D. Tubulation Size .125 O.D. Tubulation Size
ColletEachEnd Model-2 QC063-2 QC125-2ThreadOneEnd Model-TH QC063-TH8 QC125-TH25TubeOneEnd Model-TUBN QC063-TUBN063 QC125-TUBN125
QC063-TH8
QC063-2
QC063-TUBN063
Connected
Disconnected
17
Pneumatic Calibration/Purge ValveThe pneumatic calibration/ purge valve is a 3way, 8channel(8P-3T)pneumaticlogicvalveidealforcalibratingupto8individualpressuretransducersofsimilarpressurerange.A 90-120 psi control pressure is required toswitch the valve from the default measurement mode to the calibration, purge, or isolatemode.Themaximumoperatingpressureofthisvalveis750psi.Themaximumpurgepressureis500psi.
In calibration mode, input pressures are isolated allowing theusertoapplyacalibrationtothe8sensorsthatarenowmanifoldedtogether.ThePurgemodeallowsapurgepressuretobeinputandpurge condensation or contamination back through the inputtubesandawayfromthetransducer.OrderingInformation:ZOCCAL/ADPT
Dimensions in Inches (mm)
18
PrintedinUSA ©2016ScanivalveCorp.
Scanivalve Headquarters1722N.MadsonStreetLibertyLake,WA99019Tel: 509-891-9970 800-935-5151Fax:509-891-9481 e-mail:[email protected]
Scanivalve Ethernet based Intelligent Pressure and Temperature Instruments.
Visit:www.scanivalve.comformoreinformation
Intelligent LiquidPressure Measurement
Intelligent GasPressure Measurement
Servo PressureCalibrator
Intelligent ThermocoupleScanner 16, 32, and 64 Channels
Ethernet ScalableRemote A/D
Intelligent Rack MountedPressure Measurement
Miniature IntelligentPressure Measurement
Flight/Wind Tunnel/Auto Pressure Test
16, 32 and 64 channel ZOCMiniature Pressure Scanners
Contact Information:
1610