18
PRODUCT & TECHNICAL INFORMATION PRODUCT & TECHNICAL INFORMATION PORTEOUS FASTENER COMPANY Construction Products Division

Porteous - Brighton Best International

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Porteous - Brighton Best International

PRODUCT & TECHNICAL INFORMATIONPRODUCT & TECHNICAL INFORMATION

P O R T E O U SF A S T E N E RC O M P A N Y

Construction Products Division

Porteous Fastener Company

Page 2: Porteous - Brighton Best International

PORTEOUS FASTENER COMPANYPorteous Fastener Company is the largest family-owned master distributor of steel fastening products in the country. With sixteen locations across the Nation, we offer both bulk and packaged fasteners to resellers everywhere. And now with theacquisition of the U.S. Anchor Mechanical Anchor Division, we can include a wide rangeof high quality anchors of all types with the same shipment of fasteners.

Through our Construction Products Division we can supply hex, carriage, lag, and structural bolts, the companion nuts and washers, smaller screws, threaded rod, andnow anchors, all made by the best factories in America and Asia.

Call 877- I BUY PFC for the branch nearest you or check out our website at www.porteousfastener.com where you may place your order online.

Atlanta, GA(770) 449-8120

Chicago, IL(847) 228-6313

Cleveland, OH(216) 518-0562

Dallas, TX(972) 660-9121

Denver, CO(303) 576-0530

Hayward, CA(510) 471-4801

Houston, TX(713) 676-1211

Kansas, MO(816) 241-2324

Los Angeles, CA(310) 847-6776

Memphis, TN(901) 556-9533

Perth Amboy, NJ(856) 983-6620

Portland, OR(503) 248-0107

Salt Lake City, UT(801) 972-1313

Seattle, WA(425) 656-9703

Tampa, FL(813) 247-6675

Detroit, Michigan(586) 558-9503

Porteous Fastener Company

Porteous Fastener Company

Page 3: Porteous - Brighton Best International

3

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Product Application and Cross-Reference Guide . . . . . . . . . . 6-7WEDGE ANCHOR — ULTRAWEDGE™ . . . . . . . . . . . . . . . . . . . . 8

Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Hot Dipped Galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Acoustical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9303 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9316 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

SLEEVE ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Acorn Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Hex Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Round Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10304 Stainless Steel with Hex Heads . . . . . . . . . . . . . . . . . . 10304 Stainless with Flat Heads . . . . . . . . . . . . . . . . . . . . . . . 10

SLEEVE TYPE ROD HANGERS . . . . . . . . . . . . . . . . . . . . . . . . 10DROP-IN ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Shorty Drop-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

MACHINE SCREW ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . 11Setting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

CONCRETE SCREWS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Hex Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

CONCRETE SCREW ACCESSORIES . . . . . . . . . . . . . . . . . . . . 11BITS FOR CONCRETE SCREWS . . . . . . . . . . . . . . . . . . . . . . . 12TOGGLE BOLTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Mushroom Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Round Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Acoustical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TOGGLE WINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12HAMMER DRIVE ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Zinc Alloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Zinc Alloy with Stainless Nails . . . . . . . . . . . . . . . . . . . . . . . 13

HOLLOW WALL ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Hollow Wall Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Drive Anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

LAG SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13SINGLE EXPANSION SHIELDS. . . . . . . . . . . . . . . . . . . . . . . . . 13DOUBLE EXPANSION SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . 14SPLIT - FAST ANCHOR (Flat Head) . . . . . . . . . . . . . . . . . . . . . 14CONICAL PLASTIC ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . 14PLASTIC ANCHOR KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14NYLON NAIL ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14EYE COUPLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14MUNGO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Nylon Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Universal Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Jet Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Jet Plug Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 16-17Wedge Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Sleeve Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Drop-In Anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Concrete Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

LINE CARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19

MECHANICAL ANCHORING SYSTEMS

Porteous Fastener Company

Porteous Fastener Company

Page 4: Porteous - Brighton Best International

4

One pieceexpansion boltwith universalstyle collar for

heavy dutyfastening

applications.

Requires noother fastener

Concrete, Stone

Steel, 303 & 316S.S., Galvanized

1/4" x 1 3/4"to

1 1/4" x 12"8, 9

Heavy dutyanchor available

in many headstyles. Does notrequire a solid

base material forinstallation.

Requires no otherfastener

Concrete, Brick,Block, Stone

Steel, 304 S.S.

1/4" x 7/8"to

3/4" x 6 1/4"10

For medium tolight duty

applications.Available in hex

or flat head.Corrosive

resistant coating.

Requires noother fastener

Concrete, Brick,Block

Steel

3/16" x 1 1/4"to

1/4" x 5"11, 12

Female styleanchor with an

internalplug for

heavy dutyapplications.

Machine screwor bolt

Concrete, Stone

Steel, 303 S.S.

1/4" to 3/4"

10, 11

A high qualityzinc alloy anchor

for light tomedium fastening

applications.Expands by

tightening screwor bolt.

Lag bolt

Concrete, Brick,Mortar joint

Rustproof ZincAlloy

1/4" to 5/8"

13

SLEEVE LAGSHIELDDROP-INWEDGE CONCRETE

SCREWEasily hammeredinto a predrilled

hole. Available inflat head.

Requires no other fastener

Concrete, Stone

Steel

1/4” x 1 1/4"to

1/4” x 4"14

A high qualityzinc alloy anchor

that is easy toinstall. Sets by

tightening screwor bolt.

Machine screwor bolt

Concrete, Block,Stone, Brick

Rustproof ZincAlloy

1/4" to 5/8"

13, 14

A light-dutyfastener for use

in most mediums.

Available inmushroom head.

Requires no other fastener

Concrete, Block,Stone, Brick

Nylon and Steel

1/4" x 3/4"to

1/4" x 3"14

PRODUCTINFORMATION

FOR USEWITH

FOR USE IN

MADE OF

SIZE RANGE

PAGE

SPLIT FASTANCHOR

SINGLE/DOUBLEEXPANSION

NYLON NAILANCHOR

ANCHORTYPE

A caulking typeanchor with a

Zinc alloy coneand a

Lead ring.

Machine screw or bolt

Concrete, Block,Stone, Brick

Zinc Alloy andLead

10 - 24to

5/8"

11

Fully threadedmachine screwswith Zinc plated

wings. Formedium dutyfastening inhollow walls.

Requires no other fastener

Drywall, Hollow-block, Plaster

Steel

1/8" x 2"to

1/2" x 6"

12

For light dutyfastening in

hollow wall. Canbe expanded

with screw-driveror setting tool.

Requires noother fastener

Drywall, Plaster,Paneling

Steel

1/8" x shortto

1/4" Long13

A mushroom headanchor that is

relatively tamper-proof. Availablewith standard

Zinc Plated Steelnail or Stainless

Steel nail.

Requires no other fastener

Concrete, Brick,Block, Stone

High grade Zincalloy and Steel

3/16" x 7/8"to

1/4" x 3"

12, 13

Top quality nylonanchor that

saves time ininstallation. TheMN is an idealalternative to

many anchoringsystems including

lag shields andmachine screws

anchors.Machine Screws,

Sheet MetalScrews, Lag

Screws,Woodscrews,Threaded Rod

Concrete, Brick,Stone

Virgin Nylon

5/32" x 3/4"to

3/4" x 3 9/16"

14, 15

TOGGLEBOLT

MUNGONYLON PLUG

HAMMERDRIVE

MACHINESCREW ANCHOR

HOLLOWWALL

Fast no drilling forlight duty

fastening. Setswith screwdriver.

Convenientlypackaged for all

job sizes.Heatproof.

Sheet metalscrews

Sheetrock,Gypsum,

Chipboard,Aerated

Concrete, Plaster

Zinc, Nylon

#8

15

PRODUCTINFORMATION

FOR USEWITH

FOR USE IN

MADE OF

SIZE RANGE

PAGE

MUNGO JETPLUG

CONICAL PLASTICANCHOR

ANCHORTYPE

EYECOUPLING

This light-dutyplastic anchor isused with sheetmetal screws indrywall, block,

brick, or concrete.Available in kitspackaged with

screws and a drillbit.

Sheet metalscrews

Drywall, concrete,brick, block

Plastic

3/16" x 3/4"to

5/16" x 1 3/8"

14

Fasten toexpansionanchors or

threaded rod thathas already been

installed. Forpipe hanging or

tie downapplications.

Threaded Rod

N/A

Steel

1/4" and 3/8"

14

MECHANICAL ANCHORING SYSTEMS

Porteous Fastener Company

Porteous Fastener Company

Page 5: Porteous - Brighton Best International

BUILDING CONTRACTOR USESWedge Anchors

Structural supports to concreteTilt-up constructionsMachinery mountsHighway rails, post, guard apparatusPallet racksConveyorsDock bumpers

Sleeve AnchorsL brackets to block, concreteDoor and window framesPartitions, cabinets and shelvesBase angles and duct strapsPatio screen enclosures (acorn head)Dock Bumpers

Drop-InsPipe hangingMachinery mounts and halvesTransformers and metersJ Bolts in lane additions

Concrete Screws2 x 4's to concreteRigid wall insulationDuct strapsShelvingPlywood to concrete for hurricanesFurring Strips

Machine Screw AnchorsLight machineryHandrailsShuttersAir conditioning units

Lag ShieldsHurricane shutter brackets

ELECTRICAL CONTRACTOR USESWedge Anchor

Cable traysStrut for conduit & panels

Sleeve AnchorElectrical enclosuresTransformers

Sleeve Anchor Rod HangersSuspended lighting or conduit

Machine Screw AnchorsConduit clipsElectrical switchesLarge fuse boxes

Concrete ScrewsLight fixturesJunction boxesConduit straps

Lag ShieldsPipe and conduit hangers

Hammer Drives/Nylon Nail Anchors/Plastic Anchors

ThermostatsLighting fixturesConduit clipsJunction boxes

PLUMBING CONTRACTOR USESWedge Anchors

Pipe supportDrop-Ins

Pipe hangersAir ducts

Sleeve AnchorsWindow & door framesCabinetsDuct strapsSink support brackets

Concrete ScrewsWater control systemsMetersExterior sprinkler linesPipe Strapping

Mechanical or expansion anchors have been in use for generations now. Most rely on frictionto hold them in place. The anchor is simplyinserted into the hole and expanded.

The correct anchor for the job is specifiedbased on load requirements, the individualapplication, environment, approvals needed and the type of substrate it will be anchored in.Typical substrates are concrete, block, brick,stone and drywall.

Porteous Fastener Company offers one of thebroadest lines of mechanical anchors availablein a wide variety of diameters and lengths.Products such as the Ultrawedge™ confirm ourcommitment to quality and performance byproviding our customers with an exceptionalproduct priced to compete in today’s economy.

As important as price is the expected quality.Our Quality Control Department conductsrigorous product performance evaluations on adaily basis. This insures that our products meetour customers demanding standards andconform to GSA Spec. FF-S-325 requirements.

This section offers many useful anchor selectioncharts to aid the distributor and his customer,the end user, in choosing the right anchor.Today, different anchor manufacturers havecreated various trade-names all representing thesame style of anchor. This often gets confusingto the distributor or contractor. For this reason,pictures can often be the most helpful tool. Besure to reference our catalog in order to supplycontractors with the appropriate items whenthey request anchors by trade-name.

5Porteous Fastener Company

Porteous Fastener Company

Page 6: Porteous - Brighton Best International

INDUSTRY TRADE NAMES FOR MECHANICAL ANCHORS

Bantam Plug™ - Conical Plastic Anchor3

Calk-In™ - Machine Screw3

Conset Concrete Screws - Concrete Screw1

DMSA - Double Expansion Anchor2

Drive® - Split Fast Anchor3

Dynabolt® - Sleeve Anchor4

ESA - Machine Screw Anchor2

Hammer-Set™ - Nail Drive Anchor4

HIT Anchor - Hammer Drive5

HWA - Hollow Wall Anchor2

Keystone® Single - Single Expansion Anchor1

Keystone® Double - Double Expansion Anchor1

Kwik Bolt II - Wedge Anchor5

Kwik-Con - Concrete Screw5

Lok-Bolt™ - Sleeve Anchor3

LSES - Lag Screw Expansion Shield2

Multi-Set II® - Drop-In Anchor4

Nailon™ - Hammer Drive2

Plastic Screw Anchors - Conical Plastic Anchors1

Polly™ - Hollow Wall Anchor3

Power-Stud™ - Wedge Anchor3

PSA - Plastic Screw Anchor2

Red Head - Wedge Anchor4

Redi-Bolt® - Sleeve Anchor4

Sleeve-All™ - Sleeve Anchor2

SMSA - Single Expansion Anchor2

Split Bolt - Split Drive5

Sup-R-Caulk™ - Machine Screw Anchor1

Sup-R-Drop™ - Drop-In1

Sup-R-Lags™ - Lagshield1

Sup-R-Sleeve® - Sleeve Anchor1

Sup-R-Stud® - Wedge Anchor1

Sup-R-Toggle™ - Toggle Bolt1

SWTB - Toggle Bolt2

Tapcon® - Concrete Screw4

Tap-It - Nylon Nail Anchor1

Tapper® - Concrete Screw3

Thunder Bolt® - Sleeve Anchor6

Thunder Stud® - Wedge Anchor6

Titen - Masonry Screw Anchor2

Trubolt® - Wedge Anchor4

Wedge-All™ - Wedge Anchor2

Zamac Nailin® - Hammer Drive3

Zap-It® Drive Anchor - Hammer Drive1

BRAND NAMES MARKETED BY Porteous Fastener CompanyUltrawedge™ - Premium wedge anchor with

longer thread lengthKingPin™ - Mechanical anchor product lineTapKing™ - Concrete screwMungo™ - Nylon anchoring plugs and Zinc or

Nylon “EZ style” anchorsUltrabond™ - 1:1 ratio epoxy anchoring systemHS-200™ - 2:1 ratio epoxy anchoring systemSpeedSet 2 - Fast setting 10:1 ratio adhesive systemCrackbond® - Concrete repair crack injection systemThe Cracker™ - Non explosive demolition agent

1 Items listed are trademarks or registered trademarks of MKT

2 Items listed are trademarks or registered trademarks of Simpson Strong Tie

3 Items listed are trademarks or registered trademarks of Powers Fastening, Inc.

4 Items listed are trademarks or registered trademarks of ITW

5 Items listed are trademarks or registered trademarks of Hilti,Corp.

6 Items listed are trademarks or registered trademarks of Marksmen Manufacturing

For reference only. Does not guarantee that products are an exact equal of competing products’ physical characteristics orperformance. Porteous Fastener Company has no affiliation withany competing companies listed above.

1 2 3 4 5

Ultrawedge™One-piece expansionbolt for heavy-dutyapplication in solidconcrete or stone.Available in carbonsteel, 303 & 316

stainless steel andgalvanized.

Sleeve AnchorHeavy-duty anchor

available in many headstyles. Use in

concrete, brick, stoneor hollow block. Also available instainless steel.

Drop-in AnchorFemale style anchorwith an internal plug

for heavy-dutyapplications in solid

concrete or stone. Usewith machine screw or

bolt.

Machine ScrewAnchor

Caulking type anchorwith zinc alloy coneand lead ring. For

medium-duty use withmachine screw or boltin concrete or stone.

Concrete Screw Anchor

For medium tolight applicationsin concrete, brickor block. Hex or

flat head withcorrosive resistant

coating.

11 12 13 14

Double Expansion ShieldsRustproof zinc alloy anchor foruse in concrete, block, stoneor brick. Works well in softmasonry or in mediums of

unknown strength. For medium-duty use withmachine screw or bolt.

Split - Fast AnchorThis nail-in type anchor is

easily hammered into a pre-drilled hole for medium

to light-duty use inconcrete or stone.

Conical Plastic AnchorThis light-duty plastic

anchor is used with sheetmetal screws in drywall,block, brick, or concrete.Available in kits packagedwith screws and a drill bit.

Nylon Nail AnchorThis anchor has anylon body and a

steel pin. For light-duty use in concrete,

block, brick, stoneand wallboard.

152

14

17

13

6

12

16

2

17

13

6

US ANCHOR PRODUCT

Porteous Fastener Company

Porteous Fastener Company

Page 7: Porteous - Brighton Best International

BUILDING CONTRACTOR USESWedge Anchors

Structural supports to concreteTilt-up constructionsMachinery mountsHighway rails, post, guard apparatusPallet racksConveyorsDock bumpers

Sleeve AnchorsL brackets to block, concreteDoor and window framesPartitions, cabinets and shelvesBase angles and duct strapsPatio screen enclosures (acorn head)Dock Bumpers

Drop-InsPipe hangingMachinery mounts and halvesTransformers and metersJ Bolts in lane additions

Concrete Screws2 x 4's to concreteRigid wall insulationDuct StrapsShelvingPlywood to concrete for hurricanesFurring Strips

Machine Screw AnchorsLight MachineryHandrailsShuttersAir conditioning units

Lag ShieldsHurricane shutter brackets

ELECTRICAL CONTRACTOR USESWedge Anchor

Cable traysStrut for conduit & panels

Sleeve AnchorElectrical enclosuresTransformers

Sleeve Anchor Rod HangersSuspended lighting or conduit

Machine Screw AnchorsConduit clipsElectrical SwitchesLarge fuse boxes

Concrete ScrewsLight fixturesJunction boxesConduit straps

Lag ShieldsPipe and conduit hangers

Hammer Drives/Nylon Nail Anchors/Plastic Anchors

ThermostatsLighting fixturesConduit clipsJunction boxes

PLUMBING CONTRACTOR USESWedge Anchors

Pipe supportDrop-Ins

Pipe hangersAir ducts

Sleeve AnchorsWindow & door framesCabinetsDuct strapsSink support brackets

Concrete ScrewsWater control systemsMetersExterior sprinkler linesPipe Strapping

6 7 8 9 10

Toggle BoltFully-threaded

machine screws with toggle wings for medium-duty

fastening in hollow walls.

Hammer DriveAnchor

Zinc alloy anchor witheither steel or

stainless nail formedium-duty use inconcrete, brick, blockor stone. Relatively

tamperproof.

Hollow Wall AnchorFor light-dutyfastening in

hollow walls. Can beexpanded with settingtool or screwdriver.

Lag Shield AnchorRustproof zinc alloyanchor for light to

medium-dutyapplications in

concrete, brick, blockor mortar joint. Use

with lag bolt.

Single ExpansionShields

Rustproof zinc alloyanchor for use inconcrete, block,

stone or brick. Formedium-duty use

with machine screw or bolt.

15 16 17

Eye CouplingFasten to expansion

anchors or threaded rodthat has already been

installed. For pipe hangingor tie down applications.

Mungo PlugNylon anchors used with coarse

thread screws for light to medium use in concrete, block, brick

or stone.

Mungo Jet PlugAvailable in zinc or nylon for

light-duty use in drywall. Use with a

#8 sheet metal screw.

1

35

4 9

16

711

10

8

USAGE CHART

7Porteous Fastener Company

Porteous Fastener Company

Page 8: Porteous - Brighton Best International

Tests were independently performedin accordance with ASTM E488 andICBO AC58. A safety factor of 4:1 or 25% is generally accepted as a

safe working load. Reference shouldbe made to applicable codes for the specific working ratio.

Some test values are interpolations or extrapolations.

*Thread length is measured from top end of anchor including

Bull Nose head.

HEAD STAMPED — Helps determinelength of anchor after installation.

BULL NOSE HEAD — Helps to ensurethat threads won’t be damaged duringinstallation.

LONGER THREAD LENGTH — Gives greater versatility in anchorembedment depth with one anchor.

IMPRESSIVE PULLOUT VALUES —Stronger steel and anchor designprovide better load values for lessmoney.

UNIVERSAL COLLAR — Widely accepted collar design greatlyreduces the chance of spinning duringinstallation.

COINED COLLAR — Leading edgespecifically designed for quickinstallation.

TRADEMARKED — Indicatesproprietary product insuring consistentquality.

ITEMCODE

DIA. &LENGTH

MIN.EMBEDMENT

THREADLENGTH*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

W1416K 1/4" x 1 3/4" 1 1/8" 7/8" 100/1000 3.32W1422K 1/4" x 2 1/4" 1 1/8" 1 3/8" 100/1000 3.92W1432K 1/4" x 3 1/4" 1 1/8" 2" 100/1000 5.20W3822K 3/8" x 2 1/4" 1 1/2" 1" 100/600 8.22W3826K 3/8" x 2 3/4" 1 1/2" 1 1/2" 100/500 10.50W3830K 3/8" x 3" 1 1/2" 1 13/16" 100/500 11.36W3836K 3/8" x 3 3/4" 1 1/2" 2 1/2" 100/500 13.38W3850K 3/8" x 5" 1 1/2" 2 13/16" 50/300 16.84W3864K 3/8" x 6 1/2" 1 1/2" 4" 50/300 22.36W1226K 1/2" x 2 3/4" 2 1/4" 1 5/16" 50/250 20.00W1236K 1/2" x 3 3/4" 2 1/4" 2 5/16" 50/250 26.12W1242K 1/2" x 4 1/4" 2 1/4" 2 13/16" 25/200 28.48W1254K 1/2" x 5 1/2" 2 1/4" 3 1/4" 25/150 32.48W1270K 1/2" x 7" 2 1/4" 4" 25/125 43.52W1284K 1/2" x 8 1/2" 2 1/4" 4" 25/100 53.44W12100K 1/2" x 10" 2 1/4" 4" 25/100 58.24W12120K 1/2" x 12" 2 1/4" 4" 25/100 69.68W5834K 5/8" x 3 1/2" 2 3/4" 1 13/16" 25/125 41.60W5844K 5/8" x 4 1/2" 2 3/4" 2 7/8" 25/125 47.04W5850K 5/8" x 5" 2 3/4" 3 5/16" 25/125 46.56W5860K 5/8" x 6" 2 3/4" 4" 25/100 57.84W5870K 5/8" x 7" 2 3/4" 4" 25/100 72.40W5884K 5/8" x 8 1/2" 2 3/4" 4" 25/100 83.84W58100K 5/8" x 10" 2 3/4" 4" 10/40 96.60W58120K 5/8" x 12" 2 3/4" 4" 10/40 102.97W3442K 3/4" x 4 1/4" 3 1/4" 2 3/8" 20/100 65.20W3446K 3/4" x 4 3/4" 3 1/4" 2 13/16" 20/80 71.70W3454K 3/4" x 5 1/2" 3 1/4" 3 1/2" 20/80 78.40W3462K 3/4" x 6 1/4" 3 1/4" 4" 10/60 90.60W3470K 3/4" x 7" 3 1/4" 4" 10/50 98.00W3484K 3/4" x 8 1/2" 3 1/4" 4" 10/50 118.00W34100K 3/4" x 10" 3 1/4" 4" 10/40 138.80W34120K 3/4" x 12" 3 1/4" 4" 10/40 169.20W7860K 7/8" x 6" 3 7/8" 3 1/4" 5/50 126.40W7880K 7/8" x 8" 3 7/8" 3 1/4" 5/25 160.80W78100K 7/8" x 10" 3 7/8" 4" 5/20 197.20W10060K 1" x 6" 4 1/2" 3 1/4" 5/30 170.80W10090K 1" x 9" 4 1/2" 3 1/4" 5/20 240.00W100120K 1" x 12" 4 1/2" 4" 5/20 288.00W100150K 1" x 15" 4 1/2" 4" 5/20 366.40W11490K 1 1/4" x 9" 5" 3 1/4" 5/15 367.60W114120K 1 1/4" x 12" 5" 4" 5/15 460.00

ANCHOR TEST RESULTS

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1"

1-1/4"

3"

4 1/2"

6"

7 1/2"

9"

10 1/2"

12"

1 1/4"

1 7/8"

2 1/2"

3 1/8"

3 3/4"

4 3/8"

5"

6 1/4"

1 1/4"--

1 7/8"--

2 1/2"--

3 1/8"--

3 3/4"--

4 3/8"--

5"--

0.78--

0.78--

0.78--

0.78--

0.78--

0.78--

0.78--

1 1/8"1 15/16"2 3/4"1 1/2"3 1/4"

5"2 1/4"4 1/8"

6"2 3/4"4 7/8"

7"3 1/4"5 5/8"

8"3 7/8"6 5/16"8 3/4"4 1/2"7 1/4"

10” 5"

7 1/2"10"

1,4521,4521,4524,8084,8084,8088,1688,1688,16811,52911,52911,52913,22413,22413,22414,91214,91214,91216,59716,59716,597

2,0282,0282,0283,2263,2263,2266,6879,6899,6899,8629,8629,86213,48413,48413,48417,32217,32217,32223,89223,89223,892

1,4172,2693,1202,3353,3944,4523,8765,2086,5395,4297,808

10,1878,812

11,87414,93512,04415,79619,54814,56622,65130,73614,94327,69040,437

1,4521,4521,4524,8084,8084,8088,1688,1688,168

11,52911,52911,52913,22413,22413,22414,91214,91214,91216,59716,59716,597

ANCHORSIZE

EMBEDMENTDEPTH

CRITICALEDGE

DISTANCE

f’c = 2000 psiULTIMATETENSION

LOAD (lbs.)

ULTIMATESHEAR

LOAD (lbs.)

CRITICALEDGE

DISTANCE

ULTIMATETENSION

LOAD (lbs.)

ULTIMATESHEAR

LOAD (lbs.)

MINIMUMEDGE

DISTANCE

MINIMUMEDGE

REDUCTION

f’c = 4000 psi ICC-ES Approved(formerly ICBO)

Report #ER-6083

Pending

8

ULTRAWEDGE™ WEDGE ANCHORS

Porteous Fastener Company

Porteous Fastener Company

Page 9: Porteous - Brighton Best International

9

ITEMCODE

DIA. &LENGTH

MIN.EMBEDMENT

THREADLENGTH*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

W1226GK 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1242GK 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254GK 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270GK 1/2" x 7" 2 1/4" 4" 25 / 125 43.52W1284GK 1/2" X 8 1/2" 2 1/4" 4" 25/125 53.44

W5834GK 5/8" x 3 1/2" 2 3/4" 1 13/16" 25 / 125 41.60W5850GK 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860GK 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5884GK 5/8" x 8 1/2" 2 3/4" 4" 25 / 100 83.84

W3446GK 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454GK 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462GK 3/4" x 6 1/4" 3 1/4" 4" 10 / 60 90.60W3484GK 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00

ITEMCODE

DIA. & LENGTH

DRILL DIAMETER

MIN.EMBEDMENT

EYE DIAMETER

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

W1422AK 1/4" X 2 1/4" 1/4" 1 1/8" 1/4" 100 / 1000 20.00

Acoustical

The acoustical wedge anchor is aone piece anchor, typically usedin concrete or other solid mediumapplications for hanging drop-ceilings, lighting fixtures, etc.

ITEMCODE

DIA. &LENGTH

MIN.EMBEDMENT

THREADLENGTH*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

W1416S3K 1/4" x 1 3/4" 1 1/8" 7/8" 100 / 1000 3.32W1422S3K 1/4" x 2 1/4" 1 1/8" 1 3/8" 100 / 1000 3.92W1432S3K 1/4" x 3 1/4" 1 1/8" 2" 100 / 1000 5.20

W3826S3K 3/8" x 2 3/4" 1 1/2" 1 1/2" 100 / 500 10.50W3830S3K 3/8" x 3" 1 1/2" 1 13/16" 100 / 500 11.36W3836S3K 3/8" x 3 3/4" 1 1/2" 2 1/2" 100 / 500 13.38W3850S3K 3/8" x 5" 1 1/2" 2 13/16" 50 / 300 16.84

W1226S3K 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1236S3K 1/2" x 3 3/4" 2 1/4" 2 5/16" 50 / 250 26.12W1242S3K 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254S3K 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270S3K 1/2" x 7" 2 1/4" 4" 25 / 125 43.52

W5834S3K 5/8" x 3 1/2" 2 3/4" 1 13/16" 25 / 125 41.60W5844S3K 5/8" x 4 1/2" 2 3/4" 2 7/8" 25 / 125 47.04W5850S3K 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860S3K 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5870S3K 5/8" x 7" 2 3/4" 4" 25 / 100 72.40W5884S3K 5/8" x 8 1/2" 2 3/4" 4" 25 / 75 83.84

W3446S3K 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454S3K 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462S3K 3/4" x 6 1/4" 3 1/4" 4" 20 / 80 90.60 W3470S3K 3/4" x 7" 3 1/4" 4" 10 / 50 98.00W3484S3K 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00

WEDGE ANCHOR LENGTH IDENTIFICATION CODES

ABCDEFGH

1.5" < 2"2" < 2.5"2.5" < 3"3" < 3.5"3.5" < 4"4" < 4.5"4.5" < 5"5" < 5.5"

CODE CODE CODE

IJKLMNOP

FROM / TO (in.) FROM / TO (in.) FROM / TO (in.)

QRSTUV

5.5" < 6"6" < 6.5"6.5" < 7"7" < 7.5"7.5" < 8"8" < 8.5"8.5" < 9"9" < 9.5"

9.5" < 10"10" < 11"11" < 12"12" < 13"13" < 14"14" < 15"

303 Stainless Steel

316 Stainless Steel

ITEMCODE

DIA. & LENGTH MIN.EMBEDMENT

THREADLENGTH*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

W1416SK 1/4" x 1 3/4" 1 1/8" 7/8" 100 / 1000 3.32W1422SK 1/4" x 2 1/4" 1 1/8" 1 3/8" 100 / 1000 3.92W1432SK 1/4" x 3 1/4" 1 1/8" 2" 100 / 1000 5.20

W3822SK 3/8" x 2 1/4" 1 1/2" 1" 100 / 600 8.22W3826SK 3/8" x 2 3/4" 1 1/2" 1 1/2" 100 / 500 10.50W3830SK 3/8" x 3" 1 1/2" 1 13/16" 100 / 500 11.36W3836SK 3/8" x 3 3/4" 1 1/2" 2 1/2" 100 / 500 13.38W3850SK 3/8" x 5" 1 1/2" 2 13/16" 50 / 300 16.84W3864SK 3/8" x 6 1/2" 1 1/2" 4" 50 / 300 22.36

W1226SK 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1236SK 1/2" x 3 3/4" 2 1/4" 2 5/16" 50 / 250 26.12W1242SK 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254SK 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270SK 1/2" x 7" 2 1/4" 4" 25 / 125 43.52W1284SK 1/2" x 8 1/2" 2 1/4" 4" 25 / 100 53.44

W5844SK 5/8" x 4 1/2" 2 3/4" 2 7/8" 25 / 125 47.04W5850SK 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860SK 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5870SK 5/8" x 7" 2 3/4" 4" 25 / 100 72.40W5884SK 5/8" x 8 1/2" 2 3/4" 4" 25 / 75 83.84W58120SK 5/8" x 12" 2 3/4" 4" 10 / 40 102.97

W3442SK 3/4" x 4 1/4" 3 1/4" 2 3/8" 20 / 100 65.20W3446SK 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454SK 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462SK 3/4" x 6 1/4" 3 1/4" 4" 10 / 60 90.60W3470SK 3/4" x 7" 3 1/4" 4" 10 / 50 98.00W3484SK 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00W34100SK 3/4" x 10" 3 1/4" 4" 10 / 40 138.80

W10060SK 1" x 6" 4 1/2" 3 1/4" 5 / 30 170.80W10090SK 1" x 9" 4 1/2" 3 1/4" 5 / 20 240.00

Hot Dipped Galvanized

The Ultrawedge Anchor is used for heavyduty fastening applications where high pulloutvalues are required. The anchor and the holediameter are the same. The advanced designof the collar reduces the likelihood of theanchor “spinning”. Proper installation requirescleaning out the hole. Install using a torquewrench set to the suggested level as providedin the instruction sheet. The Ultrawedge isused in a wide variety of structural applications,including fastening sheet metal, steel,aluminum angles or wood to concrete. Pipe-hanging, tilt-ups, bridges, elevator equipment,conveyors and highway construction frequentlyrequire the wedge type anchor. The UltrawedgeAnchor is ideal for installing machinery, handrails, dock bumpers & storage racks, etc.Ultrawedge anchors are sold unassembled withthe appropriate nuts and washers.Meets GSA Spec, FF-S-325 Group II, Type 4,Class 1.

See page 16 for installation instructions.

*Thread length is measured from top end of anchor including Bull Nose head.

CARBON STEEL, HOT DIPPED GALVANIZED 303 & 316 STAINLESS STEEL

Porteous Fastener Company

Porteous Fastener Company

Page 10: Porteous - Brighton Best International

ITEMCODE

DIAMETER &LENGTH

MIN.EMBEDMENT

BOLTDIAMETER

BOX/CTNQTY.

WEIGHT (LBSPER 100)

ITEMCODE

DIAMETER &LENGTH

MIN.EMBEDMENT

BOLTDIAMETER

BOX/CTNQTY.

WEIGHT (LBSPER 100)

SA1413SA1422

1/4" X 1 3/8"1/4" X 2 1/4"

1"1"

3/16"3/16"

100/1000100/1000

2.243.58

ITEM DIAMETER & MIN. BOLT BOX/CTN WEIGHT (LBSCODE LENGTH EMBEDMENT DIAMETER QTY. PER 100)

SR1412 1/4" X 1 1/4" 1" 3/16" 100/1000 2.20SR1420 1/4" X 2" 1" 3/16" 100/1000 2.40SR1426 1/4" X 2 3/4" 1" 3/16" 100/1000 3.80

SR3824 3/8" X 2 1/2" 1 1/4" 5/16" 50/500 7.25

SH5614 5/16" X 1 1/2" 1" 1/4" 100/1000 4.02SH5624 5/16" X 2 1/2" 1" 1/4" 100/1000 5.76

SH3817 3/8" X 1 7/8" 1 1/4" 5/16" 50/500 7.04SH3830 3/8" X 3" 1 1/4" 5/16" 50/500 9.48SH3840 3/8" X 4" 1 1/4" 5/16" 50/500 12.00

SH1222 1/2" X 2 1/4" 1 1/2" 3/8" 25/250 13.20SH1230 1/2" X 3" 1 1/2" 3/8" 25/250 17.10SH1240 1/2" X 4" 1 1/2" 3/8" 25/250 20.40SH1260 1/2" X 6" 3" 3/8" 25/250 28.50

SH5822 5/8" X 2 1/4" 2" 1/2" 25/250 25.04SH5830 5/8" X 3" 2" 1/2" 25/250 32.70SH5842 5/8" X 4 1/4" 3 1/2" 1/2" 10/100 40.80SH5860 5/8" X 6" 3 1/2" 1/2" 10/100 55.00

SH3424 3/4" X 2 1/2" 2" 5/8" 10/100 43.60SH3442 3/4" X 4 1/4" 3 1/2" 5/8" 5/50 60.80SH3462 3/4" X 6 1/4" 3 1/2" 5/8" 5/50 86.00

Acorn Head

Flat Head

Round Head

Carbon Steel

304 Stainless Steel — Hex HeadITEMCODE

TENSION/SHEAR

DIAMETER &LENGTH

MIN.EMBEDMENT

BOLTDIAMETER

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

SH1413S 1300/1500 1/4" x 1 3/8" 1" 3/16" 100/1000 2.24

SH3817S 2400/3000 3/8" x 1 7/8" 1 1/4" 5/16" 50/500 7.04SH3830S 2400/3000 3/8" x 3" 1 1/4" 5/16" 50/500 9.48

SH1222S 4700/5200 1/2" x 2 1/4" 1 1/2" 3/8" 25/250 9.48SH1240S 4700/5200 1/2" x 4" 1 1/2" 3/8" 25/250 20.40

ITEMCODE

TENSION/SHEAR

DIAMETER &LENGTH

MIN.EMBEDMENT

BOLTDIAMETER

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

SF1430S 1300/1500 1/4" x 3" 1" 3/16" 100/1000 3.68

SF3840S 2400/3000 3/8" x 4" 1 1/4" 5/16" 50/500 12.00

304 Stainless Steel — Flat Head

The sleeve type rod hanger is assembled, and is typically usedfor attaching threaded rod of various diameters to brick, cinderblock, thin wall, marble or concrete.

SLEEVE TYPE ROD HANGERS

ITEMCODE

DIAMETER& LENGTH

DRILLDIAMETER

OPEN ENDDIA. OR ROD

MIN.EMBEDMENT

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

RH5614 5/16" X 1 1/2" 5/16" 1/4" 1" 50/500 7.35

RH3838 3/8" x 1 7/8" 3/8" 3/8" 1 1/4" 50/500 9.64

RH1212 1/2" x 2 1/4" 1/2" 1/2" 1 1/2" 25/250 18.40

RH5858 5/8" x 2 1/4" 5/8" 5/8" 2" 20/200 30.30

ITEMCODE

ANCHORSIZE

HOLEDIAMETER

THREADDEPTH

ANCHORLENGTH

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

D14 1/4" 3/8" 1/2" 1" 100/1000 2.88D38 3/8" 1/2" 13/16" 1 9/16" 100/1000 6.32D12 1/2" 5/8" 15/16" 2" 50/500 11.56D58 5/8" 7/8" 1 3/16" 2 1/2" 25/250 34.80D34 3/4" 1" 1 13/16" 3 1/8” 25/100 48.00

* Applies to carbon steel only.

*

ULTIMATE LOAD VALUES

1/4"3/8"1/2"5/8"3/4"

3"4"5"5"

3 1/2"

172831485120

1008011944

170038086876896815312

ANCHORDIAMETER

EMBED.DEPTH

f’c = 6000 psiTENSION (lbs.) SHEAR (lbs.)

The drop-in anchor is used in medium to heavy-duty applicationsin solid media such as concrete and stone. A flush, female anchor,the drop-in houses an internal plug which is held securely in placeeven when used in overhead applications. Using the setting toolprovided with each 100 anchors, the plug is driven to exactly theright depth, causing the anchor to expand. Drop-ins are frequentlyused for over-head applications, including hanging pipe, duct work,machinery, etc. Drop-ins are available in carbon steel and 303

stainless steel. Meets GSA specification FF-S-325, Group VIII, Type 1.See page 17 for installation instructions.

3/8" and 1/2" only

Hex Head

SF1413 1/4" x 1 3/8" 1" 3/16" 100/1000 2.24SF1420 1/4" x 2" 1" 3/16" 100/1000 2.40

SF1420T 1/4" x 2" Thresh. 1" 3/16" 100/1000 2.32SF1430 1/4" X 3" 1" 3/16" 100/1000 3.68SF1440 1/4" X 4" 1" 3/16" 100/1000 4.52

SF3826 3/8" X 2 3/4" 1 1/4" 5/16" 50/500 8.00SF3830 3/8" X 3" 1 1/4" 5/16" 50/500 9.48SF3840 3/8" X 4" 1 1/4" 5/16" 50/500 12.00SF3850 3/8" X 5" 2" 5/16" 50/500 13.60SF3860 3/8" X 6" 2" 5/16" 50/500 15.25

DROP-IN ANCHORSCarbon Steel, Stainless Steel, Setting Tool, Shorty Drop-In

ITEMCODE

ANCHORSIZE

HOLEDIAMETER

THREADDEPTH

ANCHORLENGTH

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

D14S 1/4" 3/8" 1/2" 1" 100/1000 2.88D38S 3/8" 1/2" 13/16" 1 9/16" 100/1000 6.32D12S 1/2" 5/8" 15/16" 2" 50/500 11.56D58S 5/8" 7/8" 1 3/16" 2 1/2" 25/250 34.80D34S 3/4" 1" 1 13/16" 3 1/8" 25/250 48.00

Drop-In — Stainless Steel

ITEMCODE

DIAMETER &LENGTH

MIN.EMBEDMENT

BOLTDIAMETER

BOX/CTNQTY.

WEIGHT (LBSPER 100)

* On select sizes.

*

Sleeve anchors are dependable for use in brick, cinder block, thin wall,marble, and concrete. One benefit is that the base material doesn’thave to be solid. The variety of head styles offers extra versatility. Anadded benefit is the ability to remove this anchor after installation.Sleeve anchors are used for anchoring window and door frames,thresholds, cabinets, theater seats, duct straps, dock bumpers,aluminum and steel angles, steel columns, etc. Meets GSA Spec, FF-S-325 Group II, Type 3, Class 3.

See page 16 for installation instructions.

10

SLEEVE ANCHORS, SLEEVE TYPE ROD HANGERS, DROP-IN ANCHORS

Porteous Fastener Company

Porteous Fastener Company

Page 11: Porteous - Brighton Best International

11

ITEMCODE

WEIGHT (LBS.PER EA.)

MT10 .07MT14 .17MT56 .28MT38 .43MT12 .66MT58 1.13

ITEMCODE

BOLT DIAMETER

HOLEDIAMETER

HOLE DEPTH

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

M10 10-24 3/8" 5/8" 100/1000 1.80M14 1/4-20 1/2" 7/8" 100/1000 4.34M56 5/16-18 5/8" 1" 100/1000 6.64M38 3/8 -16 3/4" 1 1/4" 50/500 12.72M12 1/2-13 7/8" 1 1/2" 50/250 16.58M58 5/8-11 1 1/8" 2" 25/125 38.16

ITEMCODE

WEIGHT (LBS.PER 100)

DT14 2.88DT38 6.32DT12 11.56DT58 34.80DT34 48.00

Setting ToolsTECHNICAL DATAThe tests below were performed by an independenttesting lab in accordance with ASTM E488-90. Valuesshown are average ultimate values and are offered only asa guide and are not guaranteed. A safety factor of 4 to 1or 25% is generally accepted as a safe working load.

ANCHORf’c = 3000 psiANCHOR/

DRILL DIA. SHEAR (lbs.)

M10M14M56M38M12

3/8"1/2"5/8"3/4"7/8"

9552125285052406000

12052060241041505000

ULTIMATE LOAD VALUES

TENSION (lbs.)

Setting Tool CONCRETE SCREWS

This caulking type machine screw anchor features azinc alloy cone with a lead ring. When set, using thesetting tool provided with each 100 anchors, it providesa quick setting in concrete, stone, and brick. Meets GSA specification FF-S-325, Group I, Type 1, Class 1.

The concrete screw provides fast, secure anchoring, utilizing ahardened screw with specially fashioned high and low threads that cutinto the properly sized hole and thread into concrete, masonry, brick,block, etc. This high quality screw has a corrosion resistant coating fordemanding environments. Installation is accomplished through the useof specially designed carbide bits (one provided free per box), andbecomes an even faster operation when used with the concrete screwdrive tool. See page 17 for installation instructions.

*Approvals on select sizes.*

*IMPORTANT NOTE:Due to the exacting nature of the Drop-In’s expansionrequirements, the manufacturer’s appropriate settingtool must be used for each size and type. Failure touse the correct tool could result in a fastening failure.

MACHINE SCREW ANCHORS

SHORTY DROP-INThe Shorty Drop-in is manufactured with a lip to allowfor use in deep holes or holes of questionable depth.The shorter length is perfect for shallow embedmentapplications in solid and hollow concrete, solid blockand stone. One D38ST setting tool is provided freewith every 100 pcs.

ITEMCODE

ANCHOR SIZE

HOLEDIAMETER

THREAD DEPTH

ANCHORLENGTH

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

D38Shorty 3/8" 1/2" 1/2" 3/4" 100/1000 4.2

ANCHOR SIZE

HOLE DIAMETER

EMBEDMENTDEPTH

ULTIMATE TENSIONLOAD (lbs.)

ULTIMATE SHEARLOAD (lbs.)

3/8" 1/2" 3/4" 1,936 2,115

ULTIMATE LOAD VALUESf’c = 4500 psi

TDT Complete Concrete Screw Installation Tool .6

Flat HeadITEMCODE

SCREW DIA.AND LENGTH

MINIMUMEMBEDMENT*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

TF3112CTF3116CTF3122CTF3126CTF3132CTF3140CTF1412CTF1416CTF1422CTF1426CTF1432CTF1440CTF1450C

3/16" x 1 1/4"3/16" x 1 3/4"3/16" x 2 1/4"3/16" x 2 3/4"3/16" x 3 1/4"

3/16" x 4"

1/4" x 1 1/4"1/4" x 1 3/4"1/4" x 2 1/4"1/4" x 2 3/4"1/4" x 3 1/4"

1/4" x 4"1/4" x 5"

1"1 1/8"1 1/2"1 1/2"1 1/2"1 1/2"

1"1 1/4"1 1/2"

2"2"2"2"

100/1000100/1000100/1000100/1000100/1000100/1000

100/1000100/1000100/1000100/1000100/1000100/1000100/1000

0.841.201.361.601.962.18

1.361.742.202.602.963.684.58

Hex HeadITEMCODE

SCREW DIA.AND LENGTH

MINIMUMEMBEDMENT*

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

TH3112CTH3116CTH3122CTH3126CTH3132CTH3140CTH1412CTH1416CTH1422CTH1426CTH1432CTH1440CTH1450C

3/16" x 1 1/4"3/16" x 1 3/4"3/16" x 2 1/4"3/16" x 2 3/4"3/16" x 3 1/4"

3/16" x 4"

1/4" x 1 1/4"1/4" x 1 3/4"1/4" x 2 1/4"1/4" x 2 3/4"1/4" x 3 1/4"

1/4" x 4"1/4" x 5"

1"1 1/8"1 1/2"1 1/2"1 1/2"1 1/2"

1"1 1/4"1 1/2"

2"2"2"2"

100/1000100/1000100/1000100/1000100/1000100/1000

100/1000100/1000100/1000100/1000100/1000100/1000100/1000

0.81.201.521.601.962.18

1.401.742.202.603.183.684.58

ITEM CODE DESCRIPTION WEIGHT PER EACH (LBS)

CONCRETE SCREWACCESSORIES

Installation Tool Kit

MACHINE SCREW ANCHORS, CONCRETE SCREWS& ACCESSORIES

Porteous Fastener Company

Porteous Fastener Company

Page 12: Porteous - Brighton Best International

12

ITEMCODE

DIAMETER& LENGTH

HOLEDIAMETER

ULT. TENSIONLOAD VALUE

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

ITEMCODE

DIAMETER& LENGTH

HOLEDIAMETER

ULT. TENSIONLOAD VALUE

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

TB1820M 1/8" x 2" 3/8" 240 100/1000 1.44TB1830M 1/8" x 3" 3/8" 240 100/1000 1.72TB1840M 1/8" x 4" 3/8" 240 100/1000 2.06

TB3130M 3/16" x 3" 1/2" 430 100/1000 3.58TB3140M 3/16" x 4" 1/2" 430 100/1000 4.18

TB1430M 1/4" x 3" 5/8" 900 50/500 6.44TB1440M 1/4" x 4" 5/8" 900 50/500 7.44

ITEMCODE

FOR USE WITH DIAMETER& LENGTH

WEIGHT PER EACH (lbs.)

TS532 TH OR TF 3112C-3116C 5/32" x 3 1/2" .022

TM532 TH OR TF 3122C-3126C 5/32" x 4 1/2" .024

TL532 TH OR TF 3132C-3140C 5/32" x 5 1/2" .026

TS31 TH OR TF 1412C-1416C 3/16" x 3 1/2" .023

TM31 TH OR TF 1422C-1426C 3/16" x 4 1/2" .025

TL31 TH OR TF 1432C-1440C 3/16" x 5 1/2" .027

TXL31 TH OR TF 1450C 3/16" x 6 3/4" .040

BITS FOR CONCRETE SCREWSThe standard masonry drill bit

supplied with concrete screws features a black oxide finish, highquality carbide tip, and a split shank configuration, which fits properlyin the installation tool.

TOGGLE BOLTSMushroom Head, Round Head, Flat Heat, Acoustic

HAMMER DRIVE ANCHORSZinc Alloy, Zinc Alloy with Stainless Nails

Toggle bolts and the acoustical toggles listed below are used in hollow wall, plaster, hollow tile and block applications. Three head styles are available,

Mushroom, Round and Flat head. Thescrews are zinc plated and fully threaded. The heavy duty toggle wingsare zinc plated, with the appropriate sizing stamped on the body foreasy identification. All toggle bolts are sold unassembled. Meets GSA Spec FF-B-588 C, Type I, Class A, Style 1.

Mushroom Head

Round Head

ITEMCODE

DIAMETER& LENGTH

HOLEDIAMETER

ULT. TENSIONLOAD VALUE

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

TB1820F 1/8" x 2" 3/8" 240 100/1000 1.40TB1830F 1/8" x 3" 3/8" 240 100/1000 1.68TB1840F 1/8" x 4" 3/8" 240 100/1000 1.98

TB3130F 3/16" x 3" 1/2" 430 100/1000 3.42TB3140F 3/16" x 4" 1/2" 430 100/1000 3.98

TB1430F 1/4" x 3" 5/8" 900 50/500 6.12TB1440F 1/4" x 4" 5/8" 900 50/500 7.12

ITEMCODE

DIAMETER& LENGTH

HOLEDIAMETER

EYE DIAMETER

ULT. TENSIONLOAD

BOX/CTNQTY.

WEIGHT (LBS.PER 100)

TB1440A 1/4" x 4" 5/8" 1/4" 900 25/100 12.30TB1450A 1/4" x 5" 5/8" 1/4" 900 25/100 14.52

ITEMCODE

THREADSIZE

WINGLENGTH

HOLEDIAMETER

ULT. TENSIONLOAD

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

TW18 6-32 1 7/16" 3/8" 240 100/1000 0.76TW31 10-24 1 15/16" 1/2" 430 100/1000 1.66TW14 1/4 - 20 2" 5/8" 900 100/1000 2.80TW56 5/16 - 18 2 7/16" 7/8" 1030 50/500 4.48TW38 3/8 - 16 2 3/4" 1" 1090 50/500 7.20TW12 1/2 - 13 4 1/4" 1 1/4" 1200 25/100 14.00

Flat Head

AcousticalAvailable unassembled, the tie wire acoustical toggle bolts are usedprimarily for overhead applications. The winged end is inserted throughthe drywall, ceiling tile, etc., and expands behind that medium, whilethe 1/4" x 1 1/4" fender washer and hex nut act to secure the anchoron the exterior of the hole.

Heavy duty toggle wings are zinc plated, with theappropriate sizing stamped on the wing for easyidentification.

TOGGLE WINGS

The body of the hammer drive anchor ismade from high grade Zamac 3 zinc alloy(which provides you with high pulloutvalues). It is rustproof and designed to

virtually eliminate embrittlement which frequently occurs in lowergrades of zinc alloy. Good for applications in concrete, brick, block orstone, the hammer drive comes assembled and provides for a quickand easy fastening in medium and light duty jobs. Hammer drives havea mushroom head, are relatively tamperproof, and are available withboth the standard zinc plated steel and stainless steel nails dependingupon the application requirements. Meets GSA Spec. FF-S-325,Group V, Type 2, Class 3

TB1820R 1/8" x 2" 3/8" 240 100/1000 1.44TB1830R 1/8" x 3" 3/8" 240 100/1000 1.72TB1840R 1/8" x 4" 3/8" 240 100/1000 2.06

TB3120R 3/16" x 2" 1/2" 430 100/1000 2.98TB3130R 3/16" x 3" 1/2" 430 100/1000 3.58TB3140R 3/16" x 4" 1/2" 430 100/1000 4.18TB3150R 3/16" x 5" 1/2" 430 50/500 4.56TB3160R 3/16" x 6" 1/2" 430 50/500 5.56

TB1430R 1/4" x 3" 5/8" 900 50/500 6.44TB1440R 1/4" x 4" 5/8" 900 50/500 7.44TB1450R 1/4" x 5" 5/8" 900 50/500 8.40TB1460R 1/4" x 6" 5/8" 900 50/500 9.68

TB5630R 5/16" x 3" 7/8" 1030 25/250 10.72TB5640R 5/16" x 4" 7/8" 1030 25/250 12.08TB5650R 5/16" x 5" 7/8" 1030 25/250 13.60TB5660R 5/16" x 6" 7/8" 1030 25/250 15.36

TB3830R 3/8" x 3" 1" 1090 25/250 15.44TB3840R 3/8" x 4" 1" 1090 25/250 17.56TB3850R 3/8" x 5" 1" 1090 25/250 20.08TB3860R 3/8" x 6" 1" 1090 25/250 22.48

TB1240R 1/2" x 4" 1 1/4" 1200 10/100 35.40TB1260R 1/2" x 6" 1 1/4" 1200 10/100 49.60

ITEMCODE

ANCHOR. DIA.& LENGTH

HOLEDIAMETER

GRIPRANGE

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

H3107 3/16" x 7/8" 3/16" 0-1/8" 100/1000 1.15H1406 1/4" x 3/4" 1/4" 0-1/8" 100/1000 1.70H1410 1/4" x 1" 1/4" 1/8" - 1/4" 100/1000 2.00H1412 1/4" x 1 1/4" 1/4" 1/4" - 1/2" 100/1000 2.35H1414 1/4" x 1 1/2" 1/4" 1/2" - 3/4" 100/1000 2.65H1420 1/4" x 2" 1/4" 3/4" - 1 1/4" 100/1000 3.35H1430 1/4” x 3" 1/4” 1 5/8" - 2 1/8" 100/1000 4.70

Hammer Drives

CONCRETE SCREW BITS, TOGGLE BOLTS & WINGS, HAMMER DRIVE ANCHORS

Porteous Fastener Company

Porteous Fastener Company

Page 13: Porteous - Brighton Best International

13

ANCHOR f’c = 3000 psiHOLE

SIZEEMBEDMENT

DEPTH SHEAR (lbs.)LSS14LSS56LSS38LSS12LSS58LSL14LSL56LSL38LSL12LSL58

1/2"1/2"5/8"3/4"7/8"

1/2"1/2"5/8"3/4"7/8"

1"1 1/4"1 3/4"

2"2"

1 1/2"1 3/4"2 1/2"

3"3 1/2"

14501500160020054050

16001700186027756100

185025005500800011000

185025002610800013000

ULTIMATE LOAD VALUES

TENSION (lbs.)

Zinc Alloy with Stainless Steel NailsITEMCODE

ANCHOR. DIA.& LENGTH

HOLEDIAMETER

GRIPRANGE

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

H1410S 1/4" x 1" 1/4" 1/8" - 1/4" 100/1000 2.00H1412S 1/4" x 1 1/4" 1/4" 1/4" - 1/2" 100/1000 2.35H1414S 1/4" x 1 1/2" 1/4" 1/2" - 3/4" 100/1000 2.65H1420S 1/4" x 2" 1/4" 3/4" - 1 1/4" 100/1000 3.35

HWST For 1/8" & 3/16" 1.00 lbs.

ITEM DESCRIPTION WEIGHT PERCODE EACH (LBS)

Hollow Wall Anchor Setting Tool

HWD18S 1/8 Short 6-32 x 1 3/4" 5/16” 1 1/4" 1/8" x 1/2" 100/1000 1.40HWD18SH 1/8 Short 6-32 x 1 3/4" Hex 5/16” 1 1/4" 1/8" - 1/2" 100/1000 1.40HWD18L 1/8 Long 6-32 x 2 11/32" 5/16” 1 3/4" 5/8" - 7/8" 100/1000 1.78

HWD18SL 1/8 SLong 6-32 x 2 11/32" 5/16” 1 3/4" 1/8" - 13/16" 100/1000 1.82HWD18SLH 1/8 SLong 6-32 x 2 11/32" Hex 5/16” 1 3/4" 1/8" - 13/16" 100/1000 1.82

ITEM ANCHOR SCREW SIZE HOLE ANCHOR GRIP BOX/CTN WEIGHTCODE SIZE & LENGTH DIA. BODY RANGE QTY (LBS. PER

LENGTH 100)

Hollow Wall Drive Anchors

HW18XS 1/8 XShort 6-32 x 1" 5/16" 3/4" 1/16" - 1/4" 100/1000 0.95HW18S 1/8 Short 6-32 x 1 1/2" 5/16" 1 1/4" 1/8" - 1/2" 100/1000 1.24HW18L 1/8Long 6-32 x 2" 5/16" 1 5/8" 5/8" - 7/8" 100/1000 1.58HW18SL 1/8 SLong 6-32 x 2" 5/16" 1 3/4" 1/8" - 13/16" 100/1000 1.56HW18XL 1/8 XLong 6-32 x 2 1/2" 5/16" 2 1/4" 1 1/4" - 1 1/2" 100/1000 2.18

HW31S 3/16 Short 10-24 x 2 1/4" 3/8" 2 1/16" 1/8" - 5/8" 50/500 3.28HW31L 3/16 Long 10-24 x 2 3/4" 3/8" 2 1/2" 5/8" - 1 3/16" 50/500 4.03

HW14S 1/4 Short 1/4-20 x 2 1/4" 1/2" 2 1/16" 1/8" - 5/8" 50/500 4.68HW14L 1/4 Long 1/4-20 x 2 3/4" 1/2" 2 1/2" 5/8" - 1 3/16" 50/500 5.76

ITEM ANCHOR SCREW SIZE HOLE ANCHOR GRIP BOX/CTN WEIGHTCODE SIZE & LENGTH DIA. BODY RANGE QTY (LBS. PER

LENGTH 100)

The above tests were performed by an independent testing lab inaccordance with ASTM E-488-90. Values shown are average ultimatevalues and are offered only as a guide and are not guaranteed. A safetyfactor of 4 to 1 or 25% is generally accepted as a safe working load.

EMBEDMENT

1/4"3/4"1"

1 1/4"

110413731375

f’c = 4000 psi CONCRETETENSION (lbs.)

ULTIMATE LOAD VALUES

ANCHOR SHEAR (lbs.)

128913941399

LAG SHIELDSLag shields are designed for light to medium duty fastening inconcrete, mortar joint, masonry and brick. The lag shield isrustproof, and is used with a lag screw. The screw length can bedetermined by adding the length of the lag shield, the thicknessof material to be fastened plus 1/4", as the tip of the lag screwmust protrude out from the bottom of the anchor to insureproper expansion. In hard masonry, the short lag shield may beused to minimize drilling time. In softer masonry, the long lagshield will develop superior holding strength.

Meets GSA Spec. FF - S - 325, Group II, Type 1, Classes 1 & 2

Meets GSA Spec. FF - S - 325, Group II, Type 2, Class 2, Style 1

Short SizesITEMCODE

ANCHORSIZE

HOLEDIAMETER

ANCHORLENGTH

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

LSS14 1/4" 1/2" 1" 100/1000 2.58LSS56 5/16" 1/2" 1 1/4" 100/1000 3.00LSS38 3/8" 5/8" 1 3/4" 50/500 6.28LSS12 1/2" 3/4" 2" 25/250 10.16LSS58 5/8" 7/8" 2" 25/250 13.76

Long SizesITEMCODE

ANCHORSIZE

HOLEDIAMETER

ANCHOR LENGTH

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

LSL14 1/4" 1/2" 1 1/2" 100/1000 4.20LSL56 5/16" 1/2" 1 3/4" 100/1000 4.24LSL38 3/8" 5/8" 2 1/2" 50/500 9.36LSL12 1/2" 3/4" 3" 25/250 17.12LSL58 5/8" 7/8" 3 1/2" 25/250 21.45

The rustproof, zinc alloy single expansion anchor is used withmachine screws or machine bolts in concrete, brick or stone.The screw or bolt can be removed from the anchor, ifnecessary, and replaced, without materially effecting the holding power of the anchor.

SINGLE EXPANSION SHIELDS

SE14SE56SE38SE12SE58

1/2"5/8"5/8"7/8"1"

17602080231036005980

ULTIMATE LOAD

TENSION(lbs.)

ANCHOR/DRILL DIA.

ULTIMATE LOAD VALUES

ANCHORSHEAR

(lbs.)

2120320038008100

12,000

f’c = 3700 psi Hollow BlockTENSION

(lbs.)SHEAR

(lbs.)

833----

1215----

Technical Data

ITEMCODE

INTERNALDIAMETER

HOLEDIAMETER

ANCHORLENGTH

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

SE14 1/4" 1/2" 1 5/16" 100/1000 2.86SE56 5/16" 5/8" 1 1/2" 50/500 5.84SE38 3/8" 5/8" 1 1/2" 50/500 8.62SE12 1/2" 7/8" 2" 50/200 11.40SE58 5/8" 1" 2 5/8" 25/125 20.72

The above tests were performed by an independent testing lab in accordancewith ASTM E-488-90. Values shown are average ultimate values and are offeredonly as a guide and are not guaranteed. A safety factor of 4 to 1 or 25% isgenerally accepted as a safe working load.

Hollow Wall Anchors

Hollow Wall AnchorsThis anchor is designed to be used in thin materials such aswallboard, plaster, paneling, hollow block, etc. As the screw isturned in, the anchor expands, securing itself to the back of themedium. Once set, the screw may be removed as often asnecessary. For faster installation, the setting tool listed belowmay be utilized.

ZINC ALLOY HAMMER DRIVE ANCHORS, HOLLOW WALL ANCHORS,LAG SHIELDS, SINGLE EXPANSION SHIELDS

Porteous Fastener Company

Porteous Fastener Company

Page 14: Porteous - Brighton Best International

14

ITEMCODE

SIZE BOX/CTNQTY.

WEIGHT (LBS.PER 100)

EC14EC38

1/4"3/8"

100/1000100/1000

2.255.00

ITEMCODE

SIZE BOX/CTNQTY.

WEIGHT (LBS.PER 100)

N1406MN1410MN1414MN1420MN1430M

1/4" x 3/4"1/4" x 1"

1/4" x 1 1/2"1/4" x 2"1/4" x 3"

100/1000100/1000100/1000 100/1000100/1000

.48

.52

.821.09 1.5

CPA48BLB 3/16" x 3/4" 3/16" #4 - #6 - #8 BLUE 50,000 .07CPA610BXB 3/16" x 7/8" 3/16" #6 - #8 - #10 BLUE 1000 .10CPA610BLB 3/16" x 7/8" 3/16" #6 - #8 - #10 BLUE 40,000 .10CPA1012BX 1/4" x 1" 1/4" #10 - #12 RED 1000 .20CPA1012BXB 1/4" x 1" 1/4" #10 - #12 BLUE 1000 .20CPA1012BL 1/4" x 1" 1/4" #10 - #12 RED 20,000 .20

CPA1012BLB 1/4" x 1" 1/4" #10 - #12 BLUE 20,000 .20CPA1416BXB 5/16" x 1 3/8" 5/16" #14 - #16 BLUE 500 .40CPA1416BLB 5/16" x 1 3/8" 5/16" #14 - #16 BLUE 10,000 .40

ITEM DIAMETER & HOLE USE w/ COLOR PACKAGED WEIGHT (LBS.CODE LENGTH DIAMETER SCREW SIZES QTY. PER 100)

ITEMCODE

INTERNALDIAMETER

HOLEDIAMETER

ANCHORLENGTH

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

DE14 1/4" 1/2" 1" 100/1000 3.18DE56 5/16" 5/8" 1 1/4" 50/500 5.92DE38 3/8" 3/4" 1 1/2" 50/500 11.36DE12 1/2" 7/8" 2" 25/250 17.68DE58 5/8" 1" 2 1/4" 25/250 23.04DE34 3/4" 1 1/4" 2 7/8" 10/100 46.60

ITEM CONTENTS HOLE MASTER WEIGHT (LBS)CODE DIA. CTN. QTY. PER KIT

Meets GSA Spec. FF-S-325, Group II, Type 2, Class 2, Style 2

SPLIT-FAST ANCHORS (Flat Head)Split-fast anchors can be used in concrete, hard masonry andstone. Made of high grade steel with "memory", these anchorsare easily hammered into a predrilled hole and exert expansivepressure on the inner walls of the hole, creating a securefastening. Split fast anchors come in both flat and round headstyles. Note: Drilling hole depth 1/4" greater than over-all anchorlength allows split fast drive to be hammered flush with surfaceif fixture is removed.

Used primarily for light duty fastening in concrete, brick,masonry or drywall, the conical anchor's ridged body helpseliminate spinning while the screw is being inserted. Note: All“BX” items contain anchors packaged in 100 piece bags.

CONICAL PLASTIC ANCHORS

PAK610B

PAK1012BandPAK1012

PAK1416B

3/16"

1/4"

5/16"

25

25

25

.58

1.02

1.15

100 CPA610s (Blue), 100 #6 x 1" pan combosheet metal screws, 1 (0ne) 3/16" x 4"carbide masonry drill bit.

100 CPA1012s (Blue), 100 #10 x 1" pancombo sheet metal screws, 1 (0ne) 1/4" x 4"carbide masonry drill bit. (For Red anchorsspecify PAK1012)

50 CPA1416s (Blue), 50 #14 x 1 1/4" pancombo sheet metal screws, 1 (0ne) 5/16" x4" carbide masonry drill bit.

Eye couplings are fastened to expansion anchors orthreaded rod that has already been installed. They can beused for hanging pipe, fixtures or other assemblies.Combined with a wedge or sleeve anchor, they can be usedin a variety of tie-down applications.

The double expansion anchor is manufactured of rustproof zincalloy, and is used with machine screws or machine bolts, andworks well in soft masonry and mediums of questionablestrength. As the "double" sets, the two opposing wedges pulltowards each other, expanding the full length of the anchorbody. Proper expansion requires that anchor, prior to setting,protrudes slightly above surface plane.

DOUBLE EXPANSION SHIELDS

The standard plastic anchor kit contains redor blue conical plastic anchors, combinationphillips/slotted hardened sheet metal screws

and a carbide masonry bit. The contents are housed in a sturdy plasticbox, suitable for pegboard hanging. Kits can be prepared to order witha variety of other anchors and screws, on request and availability ofmaterial.

PLASTIC ANCHOR KITS

EYE COUPLINGS

NYLON NAIL ANCHORSThe Nylon Nail Anchor is composed of a nylon body and a steel pinand is expanded by striking the pin with a hammer. The anchor can beused for light duty fastening in concrete block, brick, stone andwallboard. GSA Spec. FF-S-325, Group V, Type 2, Class 4.

ITEMCODE

DIAMETER& LENGTH

HOLEDIAMETER

MINIMUMEMBEDMENT

BOX/CTN.QTY.

WEIGHT (LBS.PER 100)

SD1414F 1/4" x 1 1/2" 1/4" 1 1/8" 100/1000 2.36SD1420F 1/4" x 2" 1/4" 1 1/8" 100/1000 2.50SD1424F 1/4" x 2 1/2" 1/4" 1 1/8" 100/1000 3.60SD1430F 1/4" x 3" 1/4" 1 1/8" 100/1000 4.50SD1434F 1/4" x 3 1/2" 1/4" 1 1/8" 100/1000 4.78SD1440F 1/4" x 4" 1/4" 1 1/8" 100/1000 5.75

ITEM SCREW SIZE HOLE BOX/CTN WEIGHT (LBSCODE SIZE DIAMETER QTY. PER 100)

MN4 #3 - #4 5/32" x 3/4" 1/8" 100/9600 .05MN5 #4 - #6 3/16" x 1" 3/16" 100/9600 .07MN6 #8 - #10 1/4" x 1 3/16" 3/16" 100/9600 .12MN7 #10 1/4" x 1 3/8" 1/4" 100/4800 .19MN8 #10 - #12 5/16" x 1 1/2" 5/16" 100/4800 .28MN10 1/4" - 5/16" 3/8" x 2" 3/8" 50/2400 .40MN12 3/8" 1/2" x 2 3/8" 7/16" 25/1200 .96MN14 7/16" 9/16" x 2 3/4" 9/16" 15/720 1.47MN16 1/2" 5/8" x 3 1/8" 5/8" 10/480 2.20MN20 9/16" - 5/8" 3/4" x 3 9/16" 3/4" 5/240 4.60

MUNGO NYLON PLUGS

“MN” - NYLON PLUGMUNGO TENSION TEST CHART f’c = 4000 psi

ANCHOR SIZEULTIMATE LOAD (lbs.)

ANCHOR /DRILL DIAMETER

FASTENERUSED

MN7

MN8MN10MN12

1/4"

5/16"

3/8"7/16"

#10 Screw

1/4" LAG

5/16" LAG

3/8" LAG

448

453792

1258

Mungo Nylon Plugs are not to be confused with standardplastic anchors. These easy to install high performanceplugs are specially engineered to outperform manymechanical anchors at a fraction of the cost. Use with eithersheet metal screws or lag screws for applications inconcrete, brick, block or stone.

DOUBLE EXPANSION SHIELDS, SPLIT-FAST ANCHORS, CONICAL PLASTICANCHORS & KITS, NYLON ANCHORS, EYE COUPLINGS, MUNGO PLUGS

Porteous Fastener Company

Porteous Fastener Company

Page 15: Porteous - Brighton Best International

15

MJPK 50 Zinc Jet Plugs 25 1 1/4 lb. ea.50 #8 x 1 1/4 Sheet Metal Screws pieces

1 #2 Phillips BitPacked in a plastic box

MFJK 50 Nylon Jet Plugs 25 .6 lb. ea50 #8 x 1 1/4 Sheet Metal Screws pieces

1 #2 Phillips BitPacked in a plastic box

JET PLUGS

JET PLUG KITS

ITEMCODE

MATERIAL LENGTH BOX/CTNQTY.

WEIGHT (LBS.PER 100)

MJP Zinc 1 1/2" 100/1000 1.46MFJ Nylon 1 3/16" 100/1000 1.5

ANCHOR1/2” (lbs.)

FASTENERUSED

MJP #8 80 110

DRYWALL

5/8” (lbs.)

“MJP” - JET PLUG

The above tests were performed by an independent testing lab in accordancewith ASTM E-488-90. Values shown are average ultimate values and are offeredonly as a guide and are not guaranteed. A safety factor of 4 to 1 or 25% isgenerally accepted as a safe working load.

MFJK- Mungo Nylon Jet Plug Kit

ITEM DESCRIPTION CASE WEIGHTCODE QTY. EA.

This “EZ style” anchor is offered in zinc and nylon and is today’spopular solution to anchoring in drywall. Simply screw the Jet Plug into the wall by using a #2 Phillips bit until flush withsurface. Attach item to be fastened using a #8 x 1 1/4" screw.

ITEMCODE

SIZE BOX/CTNQTY.

WEIGHT (LBS.PER 100)

MU6 1/4"x 1 7/16" 100/1000 .22MU8 5/16" x 2" 50/500 .44

MU10 3/8" x 2 3/8" 25/250 .80

MUNGO UNIVERSAL PLUG

FASTENERUSED

MU-6 1/4" #8* 258

ULTIMATE LOAD (lbs.)Hollow Block

TensionANCHOR/DRILL DIA.

“MU” - UNIVERSAL PLUG

ANCHORShear

MU-8

MU-10

5/16"

3/8"

#14

5/16"**

785

1619

432

1785

1895* Sheet metal screw ** Lag screw

This Nylon Plug “knots up” when expanded and isespecially suited for applications in plaster or drywall.

MUNGO NYLON PLUG FEATURESMungo should not be confused with plastic anchors used forlightweight anchoring. Many metal mechanical anchor uses havebeen replaced by Mungo nylon plugs. Other competing plugsmay look similar but are not manufactured with the sameengineered benefits. Review the following features to understandwhy Mungo plugs are the best plugs available in today’s market.

1. Polyamide 6 NylonThe nylon used in Mungo plugs is of top quality and has beentested for long periods under the most extreme conditions. It is impact proof and tolerant to temperatures of -104°F to+176°F (-40°C to +80°C).

2. Knock-In ProtectionThe Mungo plug will not expand too early due to its in-builtknock –in protection. Knock-in protection allows the user thefreedom to tap the plug complete with screw into the drilled holewithout fear of the plug expanding before it is completely in thehole. Knock-in protection also allows the plug to be adjustedback and forth in drilled hole.

3. Stabilization PointsThe Mungo plug is firmly connected by means of stabilizationpoints. These points prevent the plug from breaking open whilebeing inserted into the hole thus ensuring positive expansion ofthe plug when the screw is fitted.

4. Screw GuideThe Mungo plugs come with a built-in screw guide, whichensures positive parallel tracking of the screw down the entirelength of the plug.

5. M-TeethThe M-Teeth, stabilization points and screw guides jointlyproduce a 100% radial expansion of the plug.

6. Offset block profileOffset block profile ensure that when the plug expansion begins,the plug holds firmly against the drilled hole.

7. FinsThe Mungo fins are purposely designed to prevent the plugfrom falling out of the drilled hole in overhead applications.Further, they have the effect of preventing the plug from turningwhile the screw is being fitted.

8. Screw typesMungo plugs will accept all standard screw types, thus allowingthe user flexibility in selecting the right screw for the job. Coarsethread screws are recommended.

JET PLUGS & KITS • MECHANICAL ANCHORING SYSTEMS

Porteous Fastener Company

Porteous Fastener Company

Page 16: Porteous - Brighton Best International

16

Anchor Diameter Minimum Maximum

1. Always wear safety glasses.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994 tip diameter as shown below in Table 1.4. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as the full length of the anchor, but not closer than two anchor diameters to the bottom (opposite surface of the concrete).6. Clean the hole using compressed air and a wire brush. A clean hole is necessary for proper performance.

7. Assemble the washer and nut on the anchor so the nut is recessed slightly below the head of the anchor.8. Tap the anchor through the fixture (must be 1/8" larger than diameter of the anchor) and into the hole making sure the nut and washer rests solidly against the fixture or tap the anchor into the hole and then place bracket over the anchor.9. Tighten the nut with a torque wrench to the proper torque shown in Table 2.10. If spinning occurs, pull up on the anchor using the claw end of a hammer and then torque.

1. Always wear safety glasses.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994 tipdiameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as the full length of the anchor.6. Clean the hole using compressed air and a wire brush. A clean hole isnecessary for proper performance.

7. Place anchor through fixture (must be 1/8” larger than diameter of theanchor) and into hole making sure the nut and washer rest solidly againstthe fixture, or tap into the hole and then place bracket over the anchor(under nut and washer).8. Tighten the nut with a torque wrench to the proper torque shown in thetable below.

Anchor Diameter Torque Range

Table 1. Drill Bit Tolerances - ANSI B212.15-1994 Table 2. Torque Requirements

WEDGE ANCHORS

SLEEVE ANCHORS

ANCHOR DIA. TORQUE

Torque Requirements

1/4"5/16"3/8"1/2"

5 ft. - lbs.10 ft. - lbs.

60 ft. - lbs.90 ft. - lbs.

30 ft . - lbs.15 ft. - lbs.

5/8"3/4"

1/4" .260" .268"3/8" .390" .398"7/16" .458" .468"1/2" .520" .530"9/16" .582" .592"5/8" .650" .660"3/4" .775" .787"7/8" .905" .917"1" 1.030" 1.042"

1 1/4" 1.285" 1.300"

1/4" 5 - 10 ft. - lbs.3/8" 25 - 30 ft. - lbs.

1/2" 50 - 60 ft. - lbs.5/8" 75 - 90 ft. - lbs.

3/4" 150 - 175 ft. - lbs.7/8" 200 - 250 ft. lbs.

1" 250 - 300 ft. lbs.1 1/4" 400 - 450 ft. lbs

INSTALLATION INSTRUCTIONS

Porteous Fastener Company

Porteous Fastener Company

Page 17: Porteous - Brighton Best International

17

1. Always wear safety goggles.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994tip diameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as full length of anchor, but not closer than twoanchor diameters to the bottom (opposite surface of the concrete).

6. Clean the hole using compressed air. A clean hole is necessary forproper performance.7. Drop anchor in hole and tap flush with surface (anchor can be set flushwith base material or sub-set).8. Using setting tool, set the drop-in with several sharp hammer blowsuntil expansion plug bottoms out in hole.9. Position the fixture.10. Insert bolt and tighten.

1. Always wear safety glasses.2. Follow drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting NSI B212.15-1994 tip diameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.

5. Drill the hole a minimum of 1/4" deeper than the maximumembedment depth of the anchor (minimum anchor embedment should be 1").6. Place anchor through fixture into drilled pilot hole and drill in with hex socket or phillips bit.

DROP-IN ANCHORS

Drop-In

Setting Tool

CONCRETE SCREW

INSTALLATION INSTRUCTIONS

Porteous Fastener Company

Porteous Fastener Company

Page 18: Porteous - Brighton Best International

© Copyright 10/2006, Porteous Fastener Company, Inc.

Porteous Fastener Company 1040 Watson Center Rd.

Carson, CA 90745

1-800-I BUY PFC (1-800-428-9732) Fax: 310-834-0871

www.porteousfastener.com

Porteous Fastener Company