2
PR120-1150 AC DRILLING MUD PUMP MOTOR www.drs.com | [email protected] POWER-DENSE PERMANENT MAGNET (PM) DIRECT-MOUNTED MOTOR The DRS PR series Permanent Magnet (PM) motors are designed to maximize the benefits of a direct drive mud pump configuration. Inherently more efficient than a belt drive configuration a DRS PM machine significantly reduces fuel consumption, reduces parts and maintenance expenditures and reduces the footprint and weight of the pump package. Since 1985, DRS has been building PM machines and providing rugged motors for drilling applications including top drives. DRS is a world leader in the design and manufacture of advanced electrical machinery focused on providing machines for demanding jobs where efficient performance and precise control are required. BENEFITS Reduced maintenance - no belts, sheaves or motor bearings Direct drive configuration reduces fuel consumption Higher motor efficiency Increased safety - no belts, sheaves • Approximately 12% lower weight & 25% lower volume Pump can be configured for single 1150HP or dual motor 2300HP. FEATURES • Permanent Magnet field poles • Synchronous Motor eliminates slip • Air cooled 18 pole stator winding • Class H insulation system • Direct mounted on pump pinion shaft • No motor bearings • IP 54 connection box OPTIONAL FEATURES • Encoder • ABS Certification • Separate connection box for RTD’s & space heaters • 6 Stator RTD’s; Two 100 ohm platinum RTD’s per motor phase • Pressure sensor for blower on verification • Uses common Oil Field blower • IP44 motor housing • Water cooling • ATEX Certification

PR120-1150 AC DRILLING MUD PUMP MOTOR - Leonardo DRS · PR120-1150 AC DRILLING MUD PUMP MOTOR DRS Power Technology, Inc. 166 Boulder Drive, Fitchburg, MA 01420 | [email protected]

  • Upload
    others

  • View
    37

  • Download
    0

Embed Size (px)

Citation preview

PR120-1150AC DRILLING MUD PUMP MOTOR

www.drs.com | [email protected]

POWER-DENSE PERMANENT MAGNET (PM) DIRECT-MOUNTED MOTORThe DRS PR series Permanent Magnet (PM) motors are designed to maximize the bene� ts of a direct drive mud pump con� guration. Inherently more ef� cient than a belt drive con� guration a DRS PM machine signi� cantly reduces fuel consumption, reduces parts and maintenance expenditures and reduces the footprint and weight of the pump package.

Since 1985, DRS has been building PM machines and providing rugged motors for drilling applications including top drives. DRS is a world leader in the design and manufacture of advanced electrical machinery focused on providing machines for demanding jobs where ef� cient performance and precise control are required.

BENEFITS • Reduced maintenance - no belts, sheaves or motor bearings • Direct drive confi guration reduces fuel consumption • Higher motor effi ciency • Increased safety - no belts, sheaves • Approximately 12% lower weight & 25% lower volume • Pump can be confi gured for single 1150HP or dual motor 2300HP.

FEATURES• Permanent Magnet fi eld poles• Synchronous Motor eliminates slip• Air cooled 18 pole stator winding • Class H insulation system• Direct mounted on pump pinion shaft• No motor bearings • IP 54 connection box

OPTIONAL FEATURES

• Encoder• ABS Certifi cation

• Separate connection box for RTD’s & space heaters• 6 Stator RTD’s; Two 100 ohm platinum RTD’s per motor phase• Pressure sensor for blower on verifi cation• Uses common Oil Field blower• IP44 motor housing

• Water cooling • ATEX Certifi cation

PR120-1150 AC DRILLING MUD PUMP MOTOR

DRS Power Technology, Inc.166 Boulder Drive, Fitchburg, MA 01420 www.drs.com | [email protected]

This document does not contain any technology or technical data subject to U.S. export control. The products identi� ed herein are controlled for export under the U.S. Export Administration Regulations (EAR) and may not be exported or transferred to any

non-U.S. Person, country or entity, by any means, without prior authorization from the U.S. Department of Commerce, Bureau of Industry and Security (BIS).

2/2015

MOTOR CHARACTERISTICS

Curre

nt (A

), Vo

ltage

(Vrm

s), H

orse

powe

r

0

2000

4000

6000

8000

10,000

12,000

Speed (RPM)

Mot

or To

rque

(ft-l

bs)

0

200

400

600

800

1000

1200

1400

TorqueCurrentVoltageHP

0 100 500 600 700 800200 300 400

MOTOR DIMENSIONS

PERFORMANCE RATINGSRatings based on 3300 SCFM air� ow and a motor temperature rise of 80°C. Max allowable ambient 55°C

Torque 11,185 ft lbs

Approximate Weight 7700 lbs

Frequency at Rated Speed 81 Hz

Ef� ciency at Rated 97.9 %

Volts 580 Vrms

Rated Current 900 Amps

Rated Power 1150 HP

Speed at rated HP 540 rpm