Price List 2017 - Input interiör · Price List 2017. Selling prices for ... All types of upholstery foam used are manufactured CFC-free. Key to symbols ... DIN 75200 and DIN EN 1021

Ex-Süd/Nord/WiA / englisch / 0037 / Liefer-E / August 2013 50730002-SR 12.2016

Price List 2017

Selling prices for specialist dealers.Valid from 1 January 2017. Nonbinding recommended unit sales prices. Excluding Value Added Tax.

Subject to technical change without prior notice.

Wilkhahn is certified according to Quality Management System DIN EN ISO 9001, Environmental Management System DIN EN ISO 14001 FF.

We reserve the right to deviate from illustrations or descriptions of models. Complaints, which prove to be based on changes due to product improvements or technical progress, cannot be accepted.

In addition to standard versions of table ranges, customized options are also available. Forms, dimensions, surface finishes and prices on request.

Add-on elements: the “left” or “right” sides are always as seen by the person seated.

FinishesVeneered table tops and wooden frames of seating ranges are protected with low-solvent, water-based lacquer.Coloured metal surfaces are powder-coated, free from heavy metal.

UpholsteryAll types of upholstery foam used are manufactured CFC-free.

Key to symbols¡ Seat height¶ Overall height¢ Width| Depth

Veneer direction

as seen by the person seated

Concealed lipping

Visible lippingThe height of the seat has been determined under load conditions

using DIN testing equipment. Overall height, width and depth conform to the minimum dimension requirements.

To see them more clearly some of the accessories are shown slightly larger.

D-133-00055

Important information / typical product characteristics

ShineShine refers to impressions on the cover which can occur due to pressure, body heat and moisture. The form in which it manifests itself depends on the model, cover and upholstery technique and it is one of the characteristics of the design concerned. Therefore it is not a sign of poor quality.

Leather productionLeather is a natural product. Each leather hide is unique. Insect bites, chafed areas or scars are part of the hide’s history. They indicate the natural aspect and high quality of the material and are therefore not recognised as a justified cause for complaint.

WoodWood is a natural product. In our product ranges, we only use very carefully selected, high-quality wood and genuine-wood veneers. Typical characteristics like knots are signs of natural growth. Because each tree trunk is a one-off, diffe-rences in the pattern and colour are possible. The unique surface characteristics of wood are down to nature and therefore not considered reasons for complaints.

Indoor and outdoor furnitureThe models are suitable for outdoors. Nevertheless, we recommend not over-exposing this furniture to the effects of sun, rain, dust and wind and to keep it in a dry and well-aired place when not using.

Differences in colour / structureThe combination of different materials, such as chrome plating, or varnishing aluminium, steel or plastic can lead to differences in the colour and structure when the surfaces are compared. These differences do not constitute grounds for complaint.

Complete rangeGeneral information

Wilkhahn does not offer any guarantee for those fabrics and leather supplied that are from manufacturers with whom Wilkhahn does not have a supply agreement. A sample of upholstery materials (minimum size A 4) must be supplied in advance to allow them to be checked with regard to workability.

35 / Fiberflex100% Polyester 510 g/lin. m, width 160 cm (63")Abrasion: 70,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 5-6, BS EN ISO 105-B02 Method 2Pilling: 5, BS EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 EEN 1021-1 when covering CMHR-foam density min. 35 kg/m³EN 1021-2 when covering CMHR-foam density min. 50 kg/m³periodical vacuum cleaning, profes-sional cleaning with dry foam

37 / Racer100% polyester 440 g/lin. m, width 170 cm Abrasion: 90,000 rubs, BS EN 14465, BS EN ISO 12947-2 (Martindale)Lightfastness: 5-7, BS EN ISO 105-B02 method 2Pilling: 4-5, BS EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame retardancy:CAL 117 EBS 476 Part 7, ASTM E 84, EN ISO 1021 1+2EN 1021-1 if mounted on CMHR foam at least 35 kg/m³ EN 1021-2 if mounted on CMHR foam at least 50 kg/m³ Vacuum it regularly and have it dry cleaned.

41 / Form-fit knit (Formstrick)100% hybrid polyamide Weight: 750g/m² Abrasion: 100,000 rubs, DIN EN ISO 12947-2 (Martindale)Lightfastness: 6, DIN EN ISO 105-B02 method 2Pilling: 5, DIN EN ISO 12945-2Fastness to rubbing: Dry 5, wet 5, DIN EN ISO 105-X12 Flame retardancy:On requestVacuum it regularly and have it dry cleaned.

If it’s very damp, the elasticity of the form-fit knit (Formstrick) can slacken, but will regain its original shape when it dries.

47 / Nova100% Polyester 560 g/lin. m, width 140 cm (55")Abrasion: 50,000 rubs, DIN EN ISO12947-2 (Martindale)Light fastness: 5-7, DIN EN ISO 105-B02 Method 2Pilling: 5, DIN EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105-X12Flame resistance:CAL 117 EEN 1021-1 when covering CMHR-foam density min. 22 kg/m³EN 1021-2 when covering CMHR-foam density min. 36 kg/m³Fixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

54 / Pitch100% Trevira CS470 g/lin. m, width 140 cm (55")Abrasion:100,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 5-6, BS EN ISO 105-B02 Method 2Pilling: 5, BS EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E DIN 4102-1 B1NF P 92-503-507 M1ÖNORM A 3800-1 B1/Q1/TR1BS 5852 when covering CMHR-foamEN 1021-1/-2 when covering PUR-foam density min. 30 kg/m³UNI VF 9175 1IM when covering CMHR-foamFixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

60 / Blend100% wool600 g/lin. m, width 140 cm (55")Abrasion: 50,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 5-6, BS EN ISO 105-B02 Method 2Pilling: 3-4, BS EN ISO 12945-2Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12Flame resistance:CAL 117 EBS 5852 when covering FR-foamBS 7176 low hazard when covering CMHR-foam density min. 35 kg/m³BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³EN 1021-1/-2 when covering CMHR-foam density min. 35 kg/m³Fixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

62 / Bond100% Trevira CS480 g/lin. m, width 140 cm (55")yarn dyedAbrasion: 100,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 5-6, BS EN ISO 105-B02 Method 2Pilling: 5, BS EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12Flame resistance: CAL 117 EDIN 4102-1 B1NF P 92501-7 M1ÖNORM A 3800-1 B1/Q1/2BS 5852 when covering CMHR-foamEN 1021-1/-2 when covering PUR-foam density min. 30 kg/m³UNI VF 9175 1IM when covering CMHR-foamperiodical vacuum cleaning, professio-nal cleaning with dry foam

63 / Auris100% wool520 g/lin. m, width 140 cm (55")Abrasion: 50,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 5-6, BS EN ISO 105-B02 Method 2Pilling: 5, BS EN ISO 12945-2Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12Flame resistance:CAL 117 EBS 5852 when covering CMHR-foam 35 kg/m³EN 1021-1/-2 when covering CMHR-foam density min. 35 kg/m³UNI 9175/FA1 IM when covering FR-foam density min. 35 kg/m³Fixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

Upholstery material

Wilkhahn does not offer any guarantee for those fabrics and leather supplied that are from manufacturers with whom Wilkhahn does not have a supply agreement. A sample of upholstery materials (minimum size A 4) must be supplied in advance to allow them to be checked with regard to workability.

66 / Lona85% wool, 15% polyamide520 g/lin. m, width 140 cm (55")Abrasion: 150,000 rubs, DIN EN ISO 12947-2 (Martindale)Light fastness: 5-7, DIN EN ISO 105-B02 Method 2Pilling: 4, DIN EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105-X12Flame resistance:CAL 117 EÖNORM A 3800-1 Q1ÖNORM B 3852 flame retardant when covering PUR-foam B2BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³EN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³Fixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

67 / Miro65% new wool, 31% hemp, 4% poly-amide610 g/lin. m, width 140 cm (55")yarn dyedAbrasion:60,000 rubs, BS EN ISO 12947-2 (Mar-tindale)Light fastness: 5-7, BS EN ISO 105-B02 Method 2Pilling: 4, BS EN ISO 12945-2Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12Flame resistance:CAL 117 EEN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³periodical vacuum cleaning, professional cleaning with dry foam

69 / Granit50% wool, 50% cotton750 g/lin. m, width 138 cm (54")yarn dyedFastness to rubbing: approx. 45,000 rubs, DIN EN ISO 12947-2 (Martindale)Light fastness: 5-6, DIN EN ISO 105-B02 Method 2Pilling: 4-5, DIN EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 4, DIN EN ISO 105-X12 Flame resistance:CAL 117 EDIN 66084 P-c when covering PUR-foam B3 density min. 22 kg/m³EN 1021-1/-2 when covering PUR-foam B3 density min. 22 kg/m³Fixed covers: periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

74 / LeatherFurniture-quality cowhide with tole-rances regarding colour and structure, compliant with DGM, RAL GZ 430Test resultsLight fastness:6-7, DIN EN ISO 105-B02 Method 2Flame resistance:California TB 117 E BS 5852-3 when co-vering PUR-foam density min. 22 kg/m³EN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³CleaningRemove dirt or stains with a damp, ab-sorbent cloth and immediately rub over the surface with a dry woollen cloth.

87 / LeatherFinest, pure aniline dyed cowhide that exhibits some natural characteristics or may develop patina over time.Light fastness:>3 based on DIN EN ISO 105-B02Flame resistance:DIN 75200 and DIN EN 1021 parts 1 + 2,CE 117 ERemove dirt or stains with a damp, ab-sorbent cloth and immediately rub over the surface with a dry woollen cloth.

C224% Polyester, 22% flax/linen, 20% viscose, 20% polyacrylic, 8% wool, 6% cotton 720 g/lin. m, width 132 cm (52")Abrasion: min. 35,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 4-5, BS EN ISO 105-B02 Method 2Pilling:4, BS EN ISO 12945-2Fastness to rubbing: Dry 4, wet 3/4, EN ISO 105-X12Periodical vacuum cleaning, professional cleaning with dry foam

C365% wool, 20% polyamide, 15% alpaca588 g/lin. m, width 140 cm (55")yarn dyedAbrasion: 100,000 rubs, BS EN ISO 12947-2 (Martindale)Light fastness: 4-5, BS EN ISO 105-B02 Method 2Pilling:4, BS EN ISO 12945-2Fastness to rubbing: Dry 4-5, wet 3/4, EN ISO 105-X12 Fixed covers: Periodical vacuum cleaning, professional cleaning with dry foamRemovable covers:

3

Price List 2017

Contents by range

170 range – ON

NEW

10

180 range – Neos

NEW

22

184 range – IN

NEW

28

186 range – Metrik NEW 32

20 range – Stitz 2

34

202 range – Stand-up 36

21 range – FS-Line

NEW

38

21 range – FS Management 44

222 range – Occo NEW

46

230 range – Aline 54

240 range – Sito

64

4

249 range – Cura

68

26 range – Modus Basic NEW

70

27 range – Modus Compact NEW

72

28 range – Modus Medium

78

28 range – Modus Executive

82

290 – Sola 86

30 – Graph 88

300 range – Graph

92

340 range – Chassis 106

5

361 range – Ceno 108

440 range – Confair

112

540 range tables – Contas 130

544 range – Concentra 134

600 – Conversa 140

610 range tables – Timetable

NEW

146

620 range tables – Logon

NEW

166

632 range tables 192

640 range tables – Palette NEW

194

6

660 range – Travis

222

661 range – Travis height-adjustable 226

830 range – Cubis

228

850 range – Velas

232

860 range – Asienta

234

890 range – Cana 238

Quickship

240

Built-in component sets 246

Edging matrix 255

7

Contents in alphabetical order

632 range tables 192

Aline 230 range 54

Asienta 860 range 234

Built-in component sets 246

Cana 890 range 238

Ceno 361 range 108

Chassis 340 range 106

Concentra 544 range 134

Confair 440 range 112

Contas 540 range tables 130

Conversa 600 range 140

Cubis 830 range 228

Cura 249 range 68

Edging matrix 255

FS-Line 21 range 38

FS Management 21 range 44

Graph 30 range 88

Graph 300 range 92

IN 184 range 28

Logon 620 range tables 166

Metrik 186 range 32

Modus Basic 26 range 70

Modus Compact 27 range 72

Modus Medium 28 range 78

Modus Executive 28 range 82

Neos 180 range 22

Occo 222 range 46

ON 170 range 10

Palette 640 range tables 194

Quickship 240

Sito 240 range 64

Sola 290 range 86

Stand-up 202 range 36

Stitz 2 20 range 34

Timetable 610 range tables 146

Travis 660 range 222

Travis height-adjustable 661 range 226

Velas 850 range 232

8

Environmental information

Wilkhahn & sustainability

In over 100 years of its corporate history, Wilkhahn can look back on a sustainability philosophy that has grown over decades. Aspects such as durability, social fairness, envi-ronmental responsibility and cul-tural orientation have been evolv-ing as corporate principles since the 1950s. Wilkhahn today is regarded internationally as a model of excel-lence, not only on account of its products but also because of its modern corporate philosophy. This is because the company realised early on that sustainable design should embrace environmental as-pects, improve social relationships and define the cultural role of a company. This approach to the way we do business creates a bond be-tween us and our customers throughout the world. There is surely no more rewarding task than working together for a successful future that is worth living in.

Corporate principles

Honest product designWe strive to develop durable prod-ucts, increase their utility value and reduce waste. “Less is more” or “re-duce to the max” are principles that Wilkhahn constantly reinterprets for the future. Ecologically driven design principles are a natural, inte-gral part of product development at Wilkhahn.

A spirit of fairnessWilkhahn applies a spirit of fairness towards its employees, partners and customers. This means provid-ing first-class analyses, information, advice, management and support. In the company itself we embrace a collaborative management style which sees employee representa-tives as co-managers who help shape the company. Fairness and continual improvement in working conditions also apply to the supply chains. To achieve these aims Wilkhahn has signed an interna-tional agreement on fostering em-ployee rights.

Ecological responsibilityWilkhahn supports sustainable de-velopment. The balance we seek to strike between financial, ecological, social and cultural objectives in or-der to maintain independence de-fines Wilkhahn’s corporate culture. Compliance with ecological quality criteria throughout the product life cycle is one of the ways we gauge our own success.

Employees as partnersTop performance requires a poten-tial-driven style to the way we or-ganise our company, with flexible working hours, a bonus scheme, and group and project work. In turn, all employees share in corpo-rate success in material terms. They enjoy a comprehensive pension plan and an employee-focused health programme. And thanks to pioneering measures regarding the architecture of their surroundings, they work in an environment that reconciles social, ecological, eco-nomic and aesthetic requirements.

Sustainability policy

UN Global CompactWilkhahn joined the United Na-tions Global Compact initiative in 2007. The company commits itself to the ten principles of Global Com-pact regarding the protection of in-ternational human rights, adher-ence to labour standards and rights for employees, the protection of the environment and anti-corrup-tion, all of which are specified as binding corporate policy.

ISO 9001 quality management systemIn order to safeguard and continu-ally optimize the high quality of products and processes, a compre-hensive quality management sys-tem was set up as early as 1996. Since then it has been certified for compliance with the ISO 9001 Quality Management Standard of the International Standardization Organization. Quality management is all about customer focus, man-agement responsibility, the partici-pation of all employees involved, ensuring and improving process safety and supplier relations.

ISO 14001 environmental man-agement systemIn addition, Wilkhahn is certified in accordance with the international ISO 14001 environmental manage-ment standard. This is the interna-tional Environmental Management Standard which sets out interna-tionally recognised specifications for an environmental management system, such as reducing ecological footprints and evaluating environ-mental data and environmental performance.

EMASEMAS is the acronym for EcoMan-agement and Audit Scheme, devel-oped by the European Union. As a combined environmental manage-ment and auditing system, its pur-pose is verify companies are im-proving their environmental performance. At the north German headquarters in Bad Münder Wilkhahn has been regularly certi-fied based on the latest version of EMAS since 2001. In the environ-mental statement, confirmed by annual audits, Wilkhahn gives a public account of the company’s environmental performance.The printed version of the environ-mental statement can be ordered at http://www.wilkhahn.com/en/service/mediacenter-cad-files/ Detailed ecological product infor-mation on each of the products is also available to download.

D-133-00055

FSCThe Forest Stewardship Council® (FSC) quality label indicates compli-ance with stringent socio-economic requirements in terms of forest management and trading wood products. Wilkhahn’s Bad Münder headquarters meet the criteria of the Forest Stewardship Council (FSC) and are entitled to process and sell FSC®-certified products (li-cence code C118389, certificate no. TUEV-COC-000462).

9

Product certificationWilkhahn office ranges are not only certified according to international testing and inspection standards regarding product safety and func-tional integrity. They also meet all key international reference systems for highly health-compatible and environmentally friendly products.

GREENGUARD™Virtually all Wilkhahn ranges un-dergo GREENGUARD testing and certification. The Greenguard Envi-ronmental Institute is an independ-ent institution in the US that pri-marily certifies products with regard to their suitability for interi-ors. Besides environmental aspects, special focus is placed on ensuring that products do not emit any pol-lutants that might be harmful to health.

LEEDLeadership in Energy and Environ-mental Design (LEED) is a rating sys-tem used by the US Green Building Council to evaluate the environ-mental and social compatibility of buildings. LEED certification awards extra credit points if Wilkhahn of-fice chair and table ranges are used.

Green StarGreen Star is an extensive, volun-tary rating system developed by the Australian Green Building Council. The system assesses how ecological a building’s design is. The system uses various categories to rate any potential ecological im-pact resulting from a location cho-sen for a project, the way the pro-ject is carried out, managed or its design.Environmental Product Information sheets, as well as classifications re-garding LEED and Green Star, are listed under the product ranges concerned and can be downloaded at www.wilkhahn.com.

Responsibility from the very start

In the design and development process, ecological impact is also taken into consideration in addition to design, functional and business-related aspects. Because these fac-tors play a pivotal role in the materi-als chosen, manufacturing processes, options regarding as-sembly, logistics and transport and how easy products are to repair or recycle. This overview shows the key aspects for the entire product life cycle that currently apply at Wilkhahn.

MaterialsThe materials used are subject to stringent controls. Prohibited chemicals are not used in our prod-ucts at all. All feedstock is listed in a register of hazardous substances. This helps to minimise the use of or substitute any potentially harmful materials. With the goal being to achieve maximum durability and quality, some recycled materials are used in the production of Wilkhahn ranges. This applies in particular to metals like steel and aluminium.

Production

Water conservation, waste man-agement and sustainable energy productionWater is becoming an increasingly important resource. Wilkhahn spares no effort in minimizing wa-ter consumption in all areas. By treating process water, recycling and using state-of-the-art varnish-ing machinery, no waste water is produced that requires monitoring. The Wilkhahn waste management concept includes sorting waste se-lectively, as well as recycling and disposing of all waste fractions re-sulting from the production and management departments. The continual decrease of energy con-sumption is an important goal of the environmental management system. A combined heat and pow-er plant and connection to a biogas plant at the Bad Münder site have more than doubled energy efficien-cy. As a result, heating at the head-quarters and production facilities is CO2 neutral.

Wilkhahn production sitesWilkhahn products are manufac-tured or assembled in Bad Münder (Germany), Castellón (Spain) and Sydney (Australia). The branch facil-ities and the international subsidi-aries are not only subject to quality management requirements, but also to guidelines for the socio-eco-logical focus of corporate policy which apply through the entire company.

Product use

Aesthetics and designProducts are sustainable if they serve a purpose. The timeless de-sign of the Wilkhahn ranges also means they are useful, intuitive to operate and the materials are dura-ble. A standard that is reflected in every single detail. The Wilkhahn design approach therefore results in an increase in the utility value of a product that is destined to last.

Durability and guaranteeThe ranges set standards for prod-uct design that is sustainable in the best possible sense of the word. The durability of the high quality materials, the innovative function-ality and the traditional, understat-ed design guarantee our furniture will last for decades. We give a two-year manufacturers’ guarantee, al-lowing customers to plan reliably. An issue we feel responsible for, re-gardless of our products’ long use-ful lives. We consider guarantees way beyond these periods as selling the future short. Our services to ex-tend the ecological life of the furni-ture include maintenance as well as an overhaul of older ranges. Wilkhahn guarantees it will carry out repairs on discontinued furni-ture for at least two years after pro-duction has ceased.

End of the product life-cycle

Return of used products and re-cyclingEven after the product has reached the end of its life, we still feel re-sponsible and offer our customers extensive take-back and recycling services. We guarantee to take back all products that are no longer in use. Wilkhahn products are dis-mantled in the factory, all parts are selectively sorted in terms of their inherent materials and then recy-cled. By labelling the materials, en-suring they’re non-toxic and easy to dismantle, we’re already making sure today that the components in Wilkhahn products can be incorpo-rated into local material and pro-duction cycles and be properly re-cycled and disposed of.

Disassembly and recyclingMost of Wilkhahn’s product com-ponents are suitable for non-de-structive disassembly. To ensure that materials can be sorted ac-cording to type, all components weighing more than 150 g have been labelled accordingly. No agents to protect materials or or-ganic halogen compounds are used which would prevent subsequent recycling.

10

170 range ON®Design: wiege

Technical details

Flexframe

Swing plate Seat bearer

Mechanism cover

Button/knob

Backrest3D armrest

Seat

FunctionTask chairs with Trimension®, syn-chronous, three-dimensional kine-matics that encourages three-di-mensional dynamic sitting. The coordinated interaction of the syn-chro-adjustment mechanism, seat and back automatically adapts to the user – whatever the posture or motion involved. The supporting counter pressure is quickly and pre-cisely adjustable in any direction (a max. of 4.5 rotations) for people weighing from 45 to 120 kg. Back-rest height adjustable by up to 60 mm in six lockable positions. Back-rest and seat can be locked in the front sitting position. The seating height is precisely adjustable be-tween 400 mm and 520 mm with a DIN 4550-compliant gas lift. All models are optionally available with seat-depth extension of 400 to 450 mm. Conference and visitor chairs with Trimension, on request with swivel-mounted column not height ad-justable, alternatively as a four-leg type or cantilever chair, optionally stackable.

Frame

Task chairs and counter stoolsFive-star base, optionally with black, through-dyed plastic, or die-cast aluminium, coated (black or black textured matt finish), or silver (silver satin finish), polished or bright chrome-plated. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN 12529 as the standard version for carpets; with grey polyurethane tyre for hard floors. Castors optionally elec-trically conductive. Mechanism cov-er made of die-cast, shot-blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black, through-dyed polypropylene. Gas lift covered by telescopic protective tube made of black through-dyed polypropylene.

Counter stool with extra height-ad-justable foot ring, bright chrome-plated, with lock screw to affix it and twin wheel swivel castors with load-dependent braking.

24-hour chairsAll have an die-cast aluminium star base with extra swivel arm sup-ports, with adapted mechanics and exceptionally hard-wearing covers from Wilkhahn’s fabric and leather collection. Designed for people weighing up to 120 kg, the models consequently comply with the DIN EN 1335 standard requirements for 24-hour use.

Conference/visitor chairs Four-star, die-cast aluminium base, coated (black or silver satin finish), polished or bright chrome plated. Black, multi-purpose glides made of plastic for all types of flooring. Swivel arms made of die-cast alu-minium, coated (black or black tex-tured matt finish or silver satin fin-ish), polished or bright chrome plated. Mechanism cover made of die-cast, shot-blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black, through-dyed polypropyl-ene. Gas lift covered by telescopic protective tube made of black through-dyed polypropylene.

Cantilever chairsFrame made of bright, chrome plat-ed tubular steel, 22 mm in diame-ter, with anti-tilt stopper made of black polyamide as the standard version for carpeting, with extra glides for hard flooring, with felt in-serts on request.

Four-leg visitor chairFrame made of bright chrome-plat-ed tubular steel, legs 22 mm in di-ameter. Models 176/7 and 176/71 with multi-purpose glides made of POM (polyoxymethylene) in black for soft and hard floorings, or mod-els 176/8 and 176/81 (not stacka-ble) with load-dependent braking twin wheel swivel castors made of black polyamide DIN EN 12529 compliant as the standard version for carpeting; with grey tyre made of polyurethane for hard flooring.

Seat

Task, visitor and conference chairsHighly elastic, flexibly suspended seat shell with seat upholstery pan-el made of black, through-dyed polypropylene, polyurethane seat cushion covered in the same mate-rial as the backrest cover in Fiber-flex, or fabric. Seat can be replaced. All models except for those with management grade upholstery op-tionally available with extra pad-ding (with additional cut foam fleece). In models with manage-ment grade upholstery (174/71, 175/71, 171/71) seat cushion with extra padding and side facings, op-tionally also in leather. Optionally with seat-depth extension from 400 to 450 mm (all types with up-holstery).Task chair models 174/7, 175/7, 174/71, 175/71 optionally with a constant and comfortable tilt of 6 degrees.

11

Frame versions Task chairs 5-star base Swing plates Mechanism cover

50 Polyamide Silver satin finish, black or black coated textured matt finish

Aluminium blasted

51 Bright chrome plated Silver satin finish, black, black coated textured matt finish or bright chrome-plated

Aluminium blasted

52 Aluminium polished Aluminium polished Aluminium blasted53 Coated black Black or black coated textured matt finish Aluminium blasted60 Coated, silver satin finish Coated, silver satin finish Aluminium blasted

Visitor chairs Round steel tube frame51 Bright chrome plated

Cantilever chair Round steel tube frame51 Bright chrome plated

Castors, glides, frame components, adjustment levers

Small components 41 Black

Back

Task, visitor and conference chairsElastic back frame, height adjusta-ble by 60 mm in six lockable posi-tions, made of through-dyed, fibre-glass-reinforced polyamide, covered with Fiberflex, optionally also with fabric (and extra pad-ding). All models except for those with management grade uphol-stery optionally available with extra padding (with additional cut foam fleece). In models with manage-ment grade upholstery (174/71, 175/71, 171/71) backrest upholstery optionally with additional padding, front of backrest also with con-cealed, cut foam fleece sewn into the cover and with side facings, op-tionally with leather cover. All mod-els except for those with manage-ment grade upholstery optionally available with extra padding (with additional cut foam fleece). Medi-um-high and high backrest, high backrest optionally with headrest (height 16 cm), either in the same material as the backrest cover, or covered in leather on the front. Back can be replaced.

Seat and back

Cantilever/ four-leg visitor chairUnitary shell-frame design made of through-dyed, fibre-glass-rein-forced polypropylene. Seat cushion made of polyurethane one-piece moulded foam, in models with management grade upholstery (models 176/71, 178/71) with addi-tional padding and side facings. All models except for those with man-agement grade upholstery option-ally available with extra padding (with additional cut foam fleece). In models 176/7, 178/7 seat cushions covered in the same material as the backrest cover in Fiberflex or fabric, in models 176/71 and 178/71 with management upholstery optionally also in leather. Seat can be re-placed. In models with management grade upholstery (176/7 and 178/7) op-tionally with backrest upholstery in fabric or leather, with additional padding. Models with manage-ment grade upholstery (176/71 and 178/71) optionally with backrest cushioning in fabric or leather, with extra padding as well as cut foam fleece sewn into and concealed in the cover and side facings, backrest cover replaceable.

Armrests

Task chairs3D armrests made of fibreglass-re-inforced, black through-dyed poly-amide. Armrest pads made of black, through-dyed polyurethane (TPU), optionally also made of poly-urethane foam and covered in leather if desired. Armrest covers made of black, through-dyed poly-propylene. Height of armrests ad-justable by 100 mm (eight lockable positions), depth by 40 mm, can be swivelled 30° inwards and out-wards in each case.

Conference/visitor chairsRigid armrests made of fibreglass-reinforced, black, through-dyed polyamide. Armrest pads made of black, through-dyed polyurethane (TPU), optionally also made of poly-urethane foam and covered in leather if desired. Armrest covers made of black, through-dyed poly-propylene.

Cantilever/ four-leg visitor chair Armrest pads made of black, through-dyed polypropylene. In non-stackable chairs, optionally with upholstered armrests, when covered in fabric with black leather 74/99, when covered in leather to match the colour of the leather.

StandardsThe ON task and visitor/conference chairs comply with the DIN EN 1335, type A or B, and ANSI/BIFMA X 5.1 office chair standards. If re-quired, NPR 1813 models are availa-ble.

The ON cantilever and four-leg visi-tor chairs comply with the DIN EN 16139-L1, DIN EN 1022 and ANSI/BIFMA X5.1 standards.The ON task, four-leg visitor and cantilever chairs comply with the GS standard.

Optionally, the ON task, visitor and conference chairs (without headrest) can also be shipped with dismantled backrests in boxes.

All visitor and conference chairs have glides for soft flooring (e.g. carpets). Available on request with swivel-mounted column, not height adjustable (at no ex-tra cost).

AccessoriesOptionally for visitor chair model 176 / 7: inline connectors, model 177 made of zinc-plated steel, two-wheeled cart model 176 for 8 visi-tor chairs. Optionally for cantilever chair, model 178/7, four-wheeled trolley, model 178 for 8 cantilever chairs.

Please note:The prices for types with cushion-ing that includes fabrics and leather provided by the customer are given on request.

12

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame).

Medium-height backrest¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")

174/7With seat cushion, optionally with extra padding (please state on order), With 3-D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated swing plates 763 818 830 842 842

Additional charge/reduced pricesCovered backrest 79 98 110 110Back with extra padding 75 88 107 121 121Permanent comfort tilt (6°) 43 43 43 43 43

Coated aluminium star base 81 81 81 81 81Polished aluminium star base 116 116 116 116 116Aluminium bright chrome-plated star base 162 162 162 162 162Polished aluminium swivel arms 36 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180 180

Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 78 78 78 78 78Polyurethane foam armrest pad 50 50 50 50 50Leather-upholstered armrests 180 180 180 180 180Mechanism cover silver satin finish or black coated 36 36 36 36 36Anti-static castors 45 45 45 45 45

Without armrests – 64 – 64 – 64 – 64 – 64

24-hour chair¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")

174/8With seat cushion, optionally with extra padding (please state on order), With 3-D armrests, Covered backrest, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 1210 1246

Additional charge/reduced pricesBack with extra padding 107 121Permanent comfort tilt (6°) 43 43

Polished aluminium star base 35 35Aluminium bright chrome-plated star base 81 81Polished aluminium swivel arms 36 36Aluminium bright chrome-plated swivel arms 180 180

Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 78 78Polyurethane foam armrest pad 50 50Leather-upholstered armrests 180 180Anti-static castors 45 45

Without armrests – 64 – 64

ON® Task chairs 24-hour chairs DIN EN 1355 compliant

Upholstery material

35 47 54 6266

60636769

€ € € € €

13

Counter chair¡ 68/81 ¶ 125/138 ¢ 69 | 66 (¡ 26¾"/31⅞" ¶ 49¼"/54⅜" ¢ 27⅛" | 26")

174/1With seat cushion, optionally with extra padding (please state on order), With 3-D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control with foot ring, bright chrome-plated (precision height-adjustable)Aluminium-coated star base and swing plates 1042 1097 1109 1121 1121

Additional charge/reduced pricesCovered backrest 79 98 110 110Back with extra padding 75 88 107 121 121

Polished aluminium star base 35 35 35 35 35Aluminium bright chrome-plated star base 81 81 81 81 81Polished aluminium swivel arms 36 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180 180



ON® Counter chair

Upholstery material

35 47 54 60636769

6266

€ € € € €

14


High backrest¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")

175/7With seat cushion, optionally with extra padding (please state on order), With 3-D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated swing plates 959 1014 1026 1038 1038

Additional charge/reduced pricesCovered backrest 91 113 135 135Back with extra padding 87 100 124 149 149Headrest in the same material as the backrest cover 70 70 70 70 70Headrest covered in leather on the front, 74/99, black 113 113 113 113 113Permanent comfort tilt (6°) 43 43 43 43 43

Coated aluminium star base 81 81 81 81 81Polished aluminium star base 116 116 116 116 116Aluminium bright chrome-plated star base 162 162 162 162 162Polished aluminium swivel arms 36 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180 180



24-hour chair¡ 40/52 ¶ 105/117 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27⅛" | 26")

175/8With seat cushion, optionally with extra padding (please state on order), With 3-D armrests, Covered backrest, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 1477 1513

Additional charge/reduced pricesBack with extra padding 124 149Headrest in the same material as the backrest cover 70 70Headrest covered in leather on the front, 74/99, black 113 113Permanent comfort tilt (6°) 43 43




ON® Task chairs 24-hour chairs DIN EN 1355 compliant

Upholstery material

35 47 54 6266

60636769

€ € € € €

15


171/7With seat cushion, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 860 915 927 939

Additional charge/reduced pricesCovered backrest 79 98 110

Polished aluminium star base 35 35 35 35Aluminium bright chrome-plated star base 81 81 81 81Polished aluminium swivel arms 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180

Polyurethane foam armrest pad 50 50 50 50Leather-upholstered armrests 180 180 180 180Mechanism cover silver satin finish or black coated 36 36 36 36

Without armrests – 64 – 64 – 64 – 64

Available with pivotable column, not height adjustable (at no extra cost).

ON® Conference/visitor chairs

Upholstery material

35 47 54 606263666769

€ € € €

16

Standard height backrest¡ 43 ¶ 90 ¢ 64 | 64 (¡ 16⅞" ¶ 35⅜" ¢ 25¼" | 25¼")

176/7With seat cushion, optionally with extra padding (please state on order), Stackable 5-high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 449 504 516 528

Additional chargesCovered backrest 79 98 110Back with extra padding 75 88 107 121Leather-upholstered armrests (not stackable) 180 180 180 180


176/8Four-leg with castors, Not stackable With seat cushion, optionally with extra padding (please state on order), Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 491 551 566 577


Standard height backrest¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")

178/7With seat cushion, optionally with extra padding (please state on order), Stackable 5-high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 489 544 556 568


All visitor and conference chairs have glides for soft flooring (e.g. carpets). Four-leg chair is fitted with castors for soft flooring (e.g. carpets). Please order with soft castors (at no additional charge) for hard flooring (e.g. stone, parquet). All cantilever chairs are fitted with anti-tilt stoppers for soft flooring (e.g. carpets). For hard floorings (e.g. stone) please order with soft glides, for hard floorings (e.g. parquet) please order with extra felt glides (in each case for no additional charge).

ON® Conference/visitor and cantilever chairs

Upholstery material

35 47 54 606263666769

€ € € €

17


174/71Seat with management grade upholstery, With 3-D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated swing plates 1109 1109 1418 1500

Additional charge/reduced pricesBack with management grade upholstery 341 341 469 616Permanent comfort tilt (6°) 43 43 43 43

Coated aluminium star base 81 81 81 81Polished aluminium star base 116 116 116 116Aluminium bright chrome-plated star base 162 162 162 162Polished aluminium swivel arms 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180

Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 78 78 78 78Polyurethane foam armrest pad 50 50 50 50Leather-upholstered armrests 180 180 180 208Mechanism cover silver satin finish or black coated 36 36 36 36Anti-static castors 45 45 45 45


24-hour chair¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")

174/81Seat with management grade upholstery, With 3-D armrests, Back with management grade upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 1801 2322

Mehr-/MinderpreisePermanent comfort tilt (6°) 43 43





ON® Task chairs with management grade upholstery 24-hour chairs DIN EN 1355 compliant

Upholstery material

60636769

6266

74 87

€ € € €

18

High backrest¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")

175/71Seat with management grade upholstery, With 3-D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated swing plates 1245 1245 1554 1636

Additional charge/reduced pricesBack with management grade upholstery 369 369 503 651Headrest in the same material as the backrest cover 93 93 138 151Headrest covered in leather on the front, 74/99, black 138 138Permanent comfort tilt (6°) 43 43 43 43

Coated aluminium star base 81 81 81 81Polished aluminium star base 116 116 116 116Aluminium bright chrome-plated star base 162 162 162 162Polished aluminium swivel arms 36 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180 180

Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 78 78 78 78Polyurethane foam armrest pad 50 50 50 50Leather-upholstered armrests 180 180 180 208Mechanism cover silver satin finish or black coated 36 36 36 36Anti-static castors 45 45 45 45


24-hour chair¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")

175/81Seat with management grade upholstery, With 3-D armrests, Back with management grade upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 2006 2527

Additional charge/reduced pricesHeadrest in the same material as the backrest cover 93 138Headrest covered in leather on the front, 74/99, black 138Permanent comfort tilt (6°) 43 43





ON® Task chairs with management grade upholstery 24-hour chairs DIN EN 1355 compliant

Upholstery material

60636769

6266

74 87

€ € €

19


171/71Seat with management grade upholstery, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlAluminium-coated star base and swing plates 1190 1499 1581

Additional charge/reduced pricesBack with management grade upholstery 341 469 616

Polished aluminium star base 35 35 35Aluminium bright chrome-plated star base 81 81 81Polished aluminium swivel arms 36 36 36Aluminium bright chrome-plated swivel arms 180 180 180

Polyurethane foam armrest pad 50 50 50Leather-upholstered armrests 180 180 208Mechanism cover silver satin finish or black coated 36 36 36

Without armrests – 64 – 64 – 64

Available with pivotable column, not height adjustable (at no extra cost).

ON® Conference/visitor chairs with management grade upholstery

Upholstery material

606263666769

74 87

€ € €

20


176/71Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 781 1090 1172

Additional chargeBack with management grade upholstery 341 469 616Leather-upholstered armrests 180 180 208


176/81Four-leg with castors, Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 856 1193 1284


Standard height backrest¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")

178/71Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrestsFrame bright chrome plated 820 1129 1211


All visitor and conference chairs have glides for soft flooring (e.g. carpets). Four-leg chair is fitted with castors for soft flooring (e.g. carpets). Please order with soft castors (at no additional charge) for hard flooring (e.g. stone, parquet). All cantilever chairs are fitted with anti-tilt stoppers for soft flooring (e.g. carpets). For hard floorings (e.g. stone) please order with soft glides, for hard floorings (e.g. parquet) please order with extra felt glides (in each case for no additional charge).

ON® Conference/visitor and cantilever chairs with management grade upholstery

Upholstery material

606263666769

74 87

€ € €

21

Inline connector 177(for model 176/7) 35

Two-wheeled cart 176for 8 visitor chairs 627

Four-wheeled trolley 178for 8 cantilevers 649

ON® Accessories

€

22

Frame versions 5-star base

50 Polyamide51 Bright chrome plated52 Aluminium polished72 Aluminium high-lustre polished

180 rangeNeosDesign: wiege

Technical details

FunctionTask chairs with automatic synchro-adjustment: The tilt of the seat and backrest automatically adapt to any postures users adopt. When lean-ing back, the backrest tension in-creases proportionately. The per-son using the chair can adjust the tension precisely by turning a crank. The backrest is lockable in four po-sition at the touch of a button. In task chairs a DIN-4550-compliant gas lift for precision adjustment of the seat height. Adjustment of backrest height in seven positions within a range of 60 mm (2⅜"); models with mesh membrane backrests have lumbar support ad-justable within a range of 60 mm (2⅜") instead of the height-adjusta-ble backrest. All models with seat-depth extension in 11 positions ranging from 385 – 435 mm. Mod-els with a mesh membrane back-rest as for task chair versions.

Cantilever chairs: chair, stackable up to 5-high, for visitors, meetings, conferences and seminars to match task chairs; with flexible, unitary seat shell, integral stacking buffer and outer rail on the backrest.Models 183 / 3 with leather cover-ing (74) and 183 / 5 not stackable.

Frame

Task chairsFive-star base in glass fibre-rein-forced polyamide, through-dyed in black-grey, or in die-cast alumini-um, polished, high-lustre polished or bright chrome plated. Twin wheel swivel castors with load-de-pendent braking DIN-EN-12529-compliant as the standard version for carpeting; with grey pol-yurethane tyre for hard flooring (please specify when ordering). An-ti-static castors on request (when an aluminium frame is chosen). Syn-chro-mechanism cover in die-cast aluminium. Synchro-mechanism cover in black-grey through-dyed polypropylene. Seat bearer in glass-fibre-reinforced polyamide, through-dyed in black-grey. See ta-ble below for frame types.

Counter stoolStar base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it and twin wheel swivel castors with load-de-pendent braking.

Cantilever chairsFrame in round steel tube, 22 mm in diameter (⅞"), thickness 3 mm (⅛"), bright chrome plated, with anti-tilt stoppers in black-grey poly-amide as the standard version for carpeted floors, optionally with glides in black-grey polyamide (for soft floors) or black-grey polyu-rethane (for hard floors), optionally with additional felt insert (please specify when ordering); outer rail in die-cast zinc, bright chrome plated. Optional outer rail made of very strong, glass-fibre-reinforced plas-tic, colour-matched with the shell.

Seat

Task chairsSeat shell in polypropylene, through-dyed in black-grey or white. Cushioning: covered, one-piece moulded polyurethane foam with integral pelvic support, ex-changeable. Seat depth can be cus-tom-adjusted from 385 mm to

435 mm. The seat is designed in such a way that the angle of the pelvic support automatically ad-justs to the position of the seat shell.

Back

Task chairsBackrest shell made of polyamide with backrest shell cover made of polypropylene, black-grey or white through-dyed. Cushioning: covered polyurethane one-piece moulded foam, replaceable. Model 181/ 6 with backrest frame in glass-fibre-reinforced polyamide, in black-grey, covered with transparent, black-grey, light-grey or white high-per-formance polyester; lower section of backrest frame covering in poly-propylene, in black-grey; optional lumbar support in polyamide, black-grey through-dyed with inte-gral foam overlay.

Cantilever chairs

Seat and backUnitary seat and back shell in elastic polypropylene, through-dyed in black-grey or white. Seat cushion: exchangeable, with concealed screw fittings; comprising seat up-holstery panel and covered polyu-rethane one-piece moulded foam. Type with optional, exchangeable back cushioning the same as the seat cushion. Model 183 / 3 with leather covering not stackable. Model 183 / 5 (not stackable) With leather-covered seat and back cushions with wool-fleece overlay and side facings, optionally with seat and back shell covered with leather on the back sections.

Armrests

Task chairs3D armrests in glass-fibre-rein-forced polyamide, through-dyed in black-grey or white, with black-grey polyurethane pad, adjustable by 100 mm (3⅞") in height and 50 mm (2") in depth; can be swivelled in-wards and outwards by 15°.

Cantilever chairsPVC-free, sleeve-shaped armrest pad made of black-grey or white thermoplastic elastomer. Mod-el 183 / 5 comes with armrest pad, padded and covered in leather with top stitching, or optionally with sol-id-wood armrest pads, oak, maple or walnut natural finish.

StandardsNeos task chairs comply with the DIN EN 16139-L1, ANSI / BIF-MA X 5.1 (except for model 181 / 6) and other international office chair standards. If required, NPR 1813 models are available. Depending on the version they also fulfil the re-quirements of categories A or B of of the DIN EN 1335 office chair standard.

Neos task chairs comply with the “Ergonomics Approved” label.

The cantilever and visitor chairs comply with DIN EN 16139-L1 and DIN EN 13761 standards.


23


Medium-height backrest¡ 40/52 ¶ 98/110 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")

181/71With seat and back cushion, With 3-D armrests, Infinitely variable height adjustment, Adjustment of backrest height and seat depth, Automatic synchro-adjustment, tension controlFrame polyamide 541 559 603 906

Additional charge/reduced pricesSeat and back shell and 3-D armrests through-dyed in white (black-grey armrest pad is standard) 106 106 106 106

Frame aluminium polished 68 68 68 68Frame aluminium high-lustre polished 88 88 88 88Frame aluminium bright chrome plated 140 140 140 140

Anti-static castors 45 45 45 45


Medium-height backrest¡ 40/52 ¶ 98/110 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")

181/6With seat cushion and transparent backrest, With 3-D armrests, Infinitely variable height adjustment, Adjustment of seat depth, Automatic synchro-adjustment, tension controlFrame polyamide 541 559 603 745

Additional charge/reduced pricesHeight-adjustable lumbar support 37 37 37 37Polyester material in light-grey or white 8 8 8 8

Frame aluminium polished 68 68 68 68Frame aluminium high-lustre polished 88 88 88 88Frame aluminium bright chrome plated 140 140 140 140

Anti-static castors 45 45 45 45


Neos Task chairs

Upholstery material47 54 60

62 63 66 67 69

74

€ € € €

24

Counter chair¡ 67/80 ¶ 125/138 ¢ 66 | 64 (¡ 26⅜"/31½" ¶ 49¼"/54⅜" ¢ 26" | 25¼")

181/11With seat and back cushion, With 3-D armrests, Infinitely variable height adjustment, Adjustment of backrest height and seat depth, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable)Frame aluminium polished 807 825 869 1172

Additional charge/reduced pricesSeat and back shell and 3-D armrests through-dyed in white (black-grey armrest pad is standard) 106 106 106 106

Frame aluminium bright chrome plated 70 70 70 70


Counter chair¡ 67/80 ¶ 125/138 ¢ 66 | 64 (¡ 26⅜"/31½" ¶ 49¼"/54⅜" ¢ 26" | 25¼")

181/1With seat cushion and transparent backrest, With 3-D armrests, Infinitely variable height adjustment, Adjustment of seat depth, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable)Frame aluminium polished 807 825 869 1172

Additional charge/reduced pricesHeight-adjustable lumbar support 37 37 37 37Polyester material in light-grey or white 8 8 8 8

Frame aluminium bright chrome plated 70 70 70 70


Neos Counter chairs


62 63 66 67 69

74

€ € € €

25

All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Standard height backrest¡ 43 ¶ 80 ¢ 55 | 60 (¡ 16⅞" ¶ 31½" ¢ 21⅝" | 23⅝")

183/3With seat cushion, backrest not upholstered, Bright chrome-plated outer rail, Stackable 5-high free-standing, up to 8-high on two-wheeled cart, with leather covering, not stackable, With plastic-covered armrestsFrame bright chrome plated 438 447 467 619

Additional charge/reduced pricesSeat/back shell and armrest pad through-dyed white 30 30 30 30Back cushion 69 72 76 155Plastic outer rail, colour-matched with the shell – 53 – 53 – 53 – 53

Standard height backrest¡ 43 ¶ 80 ¢ 58 | 60 (¡ 16⅞" ¶ 31½" ¢ 22⅞" | 23⅝")

183/5With seat and back cushion, Not stackable, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seamFrame bright chrome plated 1234

Additional charge/reduced pricesSeat and back shell covered with leather on the back sections 213Solid-wood armrests – 164

Neos Cantilever chairs


62 63 66 67 69

74

€ € € €

26

Four-wheeled trolley 183for eight stackable cantilever chairs 431

Neos Accessories

€

28

Frame versions Star base Swing plates

50 Polyamide Black matt or coated in silver-satin finish52 Aluminium polished Black matt or coated in silver-satin finish or polished72 Aluminium high-lustre polished Black matt or coated in silver-satin finish or high-lustre polished60 Coated, silver satin finish Coated, silver satin finish80 Black matt coating Black matt coating81 Matt turquoise coated Matt turquoise coated82 Matt grey coated Matt grey coated83 Matt orange coated Matt orange coated84 Matt red coated Matt red coated

Mechanism shell matt black coated, flexible mechanism cover and knob to adjust the tension control made of black, through-dyed plastic.

184 rangeINDesign: wiege

Technical details

FunctionAn office task chair with Trimen-sion®, integrated synchronously supporting 3D kinematics which al-lows the right-hand and left-hand half of the chair to be tilted in any direction via two flexible swing swivel arms. The goal is to encour-age the natural range of motion the pelvis is capable of which in-cludes flexing, extending and mov-ing it sideways to rotating it. The combination of the 3D synchro-nous adjustment mechanism with a highly elastic seat and back guaran-tees the chair adapts automatically to any movement made or posture adopted by the person sitting on it. As a result, the body is supported in any position and maintains its cen-tre of gravity.

The counter pressure, which pro-vides support in any direction moved in, is precision adjustable for people weighing from 45 to 140 kg by changing the elasticity. The backrest has optional, height-ad-justable lumbar support (in six lock-able positions of up to 60 mm).

The backrest and seat can locked in the neutral sitting position, the 3D frontwards tilt of 5° can be activat-ed by pressing a button in order to harness the maximum range of mo-tion. The seating height can be pre-cisely adjusted at the touch of a button between 400 mm and 520 mm with a DIN 4550-compliant gas lift.Seat depth: 430 mm, optionally with seat depth that can be adjust-ed while sitting down in 4 lockable positions of 400 to 450 mm.

Frame

Task chairs Five-star base made of black through-dyed, glass-fibre-rein-forced polyamide, optionally die-cast aluminium, coated, polished or high-lustre polished.Twin wheel swivel castors with load-dependent braking, made of black polypropylene compliant with DIN EN 12529 as the standard version for carpets; optionally with grey tyre for hard floors. Castors optionally electrically conductive.Gas lift covered by telescopic pro-tective tube made of black through-dyed polypropylene.Mechanism cover made of die-cast aluminium, coated matt black with black through-dyed polypropylene bellows and thermoplastic elasto-mer to accommodate the flexibly mounted central spring, knob to adjust the counter pressure made of polyamide (for people weighing from 45 to 140 kg).Each chair has two swivel arms which can move independently of one another, made of die-cast alu-minium, coated, matt polished or high-lustre polished, with protec-tive caps made of polypropylene.

Counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it and twin wheel swivel castors with load-de-pendent braking.

24-hour chairsAlways with die-cast aluminium star base, with extra swivel arm supports and high-performance covers. Designed for people weigh-ing up to 150 kg, the models also comply with the British Standard.

Seat and backUnitary, highly elastic and flexibly suspended seat and back made of high-performance polyamide. Seat shell made of black or white through-dyed polyamide with polypropylene seat upholstery pan-el. Polyurethane seat cushions with CFC-free foam, covered in Racer, optionally also with Formstrick (form-fit knit) that offers different support zones, in the same material as the backrest cover, or with fabric covers from the Wilkhahn fabric collection, then with facings sewn-in and deep top stitching length-ways to create contours. The seat upholstery panel, cushioning and covers are replaceable.With optional precision adjustable seat-depth extension of 400 to 450 mm. Seat cushions covered with form-fit knit which has different support zones, in the same material as the cover on the backrest, or with fabric covers and then with facing made of black Racer sewn in, only in the same material and col-our when the seat cover is also in Racer and with deep, lengthways top stitching to create contours. The seat upholstery panel, cushion-ing and covers are replaceable.

The back section is the frame, op-tionally with Hytrel® lumbar sup-port, in black or white to match the seat shell; height-adjustable by 60 mm in six lockable positions and can be retrofitted at any time. The back is covered in Formstrick (form-fit knit) which includes different elasticity for flexible and support-ing zones, optional two-ply cover made of Formstrick with integrated foam with different support zones. Colours based on the Wilkhahn sample card.

ArmrestsArmrests height adjustable by 100 mm in ten lockable positions and made of glass-fibre-reinforced, black through-dyed polyamide, op-tionally with three dimensional ad-justment. Armrest pads made of black through-dyed polypropylene, optionally of polyurethane foam. Also optionally without armrests.

StandardsThe IN task chairs comply with the DIN EN 1335, ANSI/BIFMA X 5.1. and GS standards.

Please noteIf very damp, the elasticity of the Formstrick can slightly slacken, but will regain its original shape when it dries.

29

Medium-height backrest¡ 40/52 ¶ 101/113 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 39¾"/44½" ¢ 27⅛" | 26")

184/7With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment, Trimension, tension controlPlastic star base, aluminium-coated swing plates 599 612 666 695

Additional charge/reduced pricesAluminium-coated star base and swing plates 43 43 43 43Aluminium polished star base, coated swivel arms 43 43 43 43Aluminium high-lustre polished star base, coated swivel arms 43 43 43 43Aluminium polished star base and swing plates 100 100 100 100Aluminium high-lustre polished star base and swivel arms 100 100 100 100

Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones 43 43 43 43Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 83 93 93 96Height-adjustable lumbar support 15 15 15 153D armrests, armrest pads made of PP 22 22 22 22Armrest pads made of polyurethane foam for 2D and 3D 12 12 12 12Anti-static castors 45 45 45 45Without armrests – 62 – 62 – 62 – 62

24-hour chair¡ 40/52 ¶ 101/113 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 39¾"/44½" ¢ 27⅛" | 26")

184/8With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment, Trimension, tension controlAluminium-coated star base and swing plates 792 808 877 911

Additional charge/reduced pricesAluminium polished star base, coated swivel arms (without additional charge) • • • •Aluminium high-lustre polished star base, coated swivel arms (without additional charge) • • • •Aluminium polished star base and swing plates 57 57 57 57Aluminium high-lustre polished star base and swivel arms 57 57 57 57

Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones 43 43 43 43Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 83 93 93 96Height-adjustable lumbar support 15 15 15 153D armrests, armrest pads made of PP 22 22 22 22Armrest pads made of polyurethane foam for 2D and 3D 12 12 12 12Anti-static castors 45 45 45 45Without armrests – 62 – 62 – 62 – 62

• available


IN Task chairs, 24-hour task chair BS-5459 compliant

Upholstery material37 41 54 60

636669

€ € € €

30

Counter chair¡ 65/78 ¶ 126/139 ¢ 69 | 66 (¡ 25⅝"/30¾" ¶ 49⅝"/54¾" ¢ 27⅛" | 26")

184/1With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment Trimension, tension control without switchable 3D forwards tilt at 5° with foot ring, bright chrome-plated (precision height-adjustable)Aluminium-coated star base and swing plates 840 853 907 936

Additional charge/reduced pricesAluminium polished star base, coated swivel arms (without additional charge) • • • •Aluminium polished star base and swing plates 57 57 57 57

Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones 43 43 43 43Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) 83 93 93 96Height-adjustable lumbar support 15 15 15 153D armrests, armrest pads made of PP 22 22 22 22Armrest pads made of polyurethane foam for 2D and 3D 12 12 12 12Without armrests – 62 – 62 – 62 – 62

• available

IN Counter chairs


636669

€ € € €

32

Frame versions Cantilever chair

51 Bright chrome plated85 Grey coated textured matt finish (Pantone Cool Gray 10 C)86 Grey-beige coated textured matt finish (Pantone 7530 C)87 Orange-red coated textured matt finish (Pantone 2349 C)88 Blue-grey coated textured matt finish (Pantone 2178 C)90 Black coated textured matt finish (RAL 9011)91 White coated with textured matt finish (RAL 9016)

186 rangeMetrikDesign: white ID

Technical details

Function The Metrik cantilever chair stands out for its consistently integrated design approach. All the compo-nents play with contrasts such as distinctiveness and neutrality, com-fort and an understated appeal, as well as modernity and timeless de-sign. As a result, Metrik can be com-bined with a variety of table con-cepts and office chairs. A choice of six colours for the body and frame and plenty of different options and colours for the covers ensure huge design scalability. To suit prefer-ences, Metrik either complements the overall design concept or pur-posely adds a splash of colour.

Chairs

Frame Frame made of tubular steel, op-tionally with textured matt finish coated in white, black, grey, grey-beige, orange-red, blue-grey or bright chrome-plated, with anti-tilt stopper made of black polyamide as the standard version for carpets, optionally with multipurpose glides for hard floorings (e.g. stone), for wood floorings (e.g. parquet) please order with extra felt glides.Stacking buffer made of plastic like the shells and frame colour.

Please note: coated frame versions aren’t stackable.

Seat and back Unitary seat and backrest shell with integrated armrests made of through-dyed, glass fibre-rein-forced polyamide the same as the shell, optionally with a textured matt finish coated in white, black, grey, grey-beige, orange-red or blue-grey.Seat cushion exchangeable, con-sists of seat upholstery panel and covered polyurethane one-piece moulded foam. Type with optional, exchangeable back cushioning the same as the seat cushion.

Weight 8.6 kg

AccessoriesInline connectors (2 in each set) made of black plastic

Please note:When exposed to ultra violet rays for long periods of time, the colours of plastics can change slightly.

33

Standard height backrest¡ 45 ¶ 87 ¢ 57 | 60 (¡ 17¾" ¶ 34¼" ¢ 22½" | 23⅝")

186/3with seat cushionCoated frame, not stackable 293 328 338 352 440

Additional chargesBright chrome-plated frame, up to 6 stackable free-standing 30 30 30 30 30With seat and back cushion 78 87 91 96 146

Accessories186 Four-wheeled trolleyfor 8 cantilevers 293187 Inline connector2 for bright chrome-plated frame 8

All cantilever chairs are optionally available with anti-tilt stoppers for soft floorings (e.g. carpets), with multipurpose glides for hard floorings (e.g. stone), for wood floorings (e.g. parquet) please order with extra felt glides.

Metrik Cantilever chair

Upholstery material

37 47 54 60636667

74

€ € € € € €

34

Stitz¶ 60/83 ¢ 31 (¶ 23⅝"/32⅝" ¢ 12¼")

201/1Seat surface corkFrame black 490

201/2Frame black 547 571

20 rangeStitz 2Design: ProduktEntwicklung Roericht

Technical details

Upholstery material

60 63 66 67

74

€ € €

FunctionThe Stitz is a leaning aid with infi nitely variable height adjust-ment by means of an encapsulated gas lift.

FrameBlack elastomer base filled with quartz sand. Black polyamide base plate.

SeatBlack polyamide seat frame. Cork inset, optionally hard wax treated, covered in fabric or in embossed leather. Gas lift lever for height adjustment, accessible all round, underneath black polyamide seat base.

36

Stand-up¶ 67 ¢ 32 (¶ 26⅜" ¢ 12⅝")

202/0101Covered in Fiberflex fabric: Black 269

202/0102Covered in Fiberflex fabric: Red 269

202/0103Covered in Fiberflex fabric: Light blue 269

202/0104Covered in Fiberflex fabric: Green 269

202/0105Covered in Fiberflex fabric: Orange 269

202/0106Covered in Fiberflex fabric: Dark blue 269

202/0107Covered in Fiberflex fabric: Anthracite 269

202/0108Covered in Fiberflex fabric: Grey 269

202/0109Covered in Fiberflex fabric: Brown 269

incl. carry-strap Black base

Upholstery material

35

€

202 rangeStand-upDesign: Thorsten Franck

Technical details

FunctionAn object in motion, when sat on it’s turned from a one-legged to stable three-legged piece of furniture.

BodyConical hollow body made of EPP (expanded polypropylene) with a lid upholstered with cut foam that serves as the seat. Body and seat fully covered with three-dimen-sional fabric. With a tapered base made of black, anti-slip plastic with integrated steel weights and a damping cylinder. Carry-strap made of strong, black plastic.

WeightJust 4.5 kg

Please noteIn wet or dirty conditions, the base’s grip can vary. It can cause scuff marks on light-coloured floor-ing.

38

Frame versions Task chairs Star base and swing arms

51 Bright chrome plated52 Star base aluminium polished – swing arms coated (black)53 Coated black60 Coated, silver satin finishCantilever chair Round steel tube frame or oval aluminium tube frame

51 Bright chrome plated53 Coated black60 Coated, silver satin finish

Small components Castors or glides, frame components, armrests, adjustment levers

41 Black

21 rangeFS-LineDesign: Klaus Franck, Werner Sauer

Technical details

FunctionTask chairs with automatic synchro-adjustment: the seat / backrest an-gle adjusts automatically to the po-sition of the person sitting on them. When leaning back, the backrest tension increases proportionately. The person using the chair can ad-just the tension precisely. The front position is lockable by engaging the lever. DIN 4550 compliant gas lift for precision adjustment of the seating height.

Conference chairs / visitor chairs with automatic synchro-adjust-ment, but without front locking po-sition, without any option to preci-sion adjust the height.

Frame

Task chairsDie-cast aluminium star base, bright chrome plated, polished or coated.Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN 12529 as the standard ver-sion for carpets; with grey soft poly urethane tyre for hard floors. Castors optionally electrically con-ductive. Black polyamide glides as the standard version for carpets and in black polyurethane for hard floorings.

Swivel arms in die-cast aluminium, bright chrome plated or coated in the same colour depending on star base (coated black with polished star-base).

211/1 counter stoolWith FS-star base on glides.

211/11 counter stoolStar base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it with and twin wheel swivel castors with load-dependent braking.

Cantilever chairs:Frame for models 212/5 in tubular steel, bright chrome plated or coat-ed; stackable version with bright chrome plated frame only. Frame of model 220 in oval aluminium tub-ing, bright chrome plated or coat-ed.Cantilever chair model 212 with an-ti-tilt stoppers as the standard ver-sion for carpeted floors, with addi-tional glides for hard floors, on request with felt insert.

Seat and back Models 211/1 to 213/8Seat and backrest shell in viscoelas-tic, through-dyed polypropylene with a flexible middle section in the colours91 natural white,92 platinum97 asphalt,99 black.Standard armrests in the same ma-terial, black.

Backrest of task chairs 211 and 213 optionally with integral, adjustable lumbar support. Seat upholstery: one-piece moulded foam covered, replaceable.

Seat and back Models 220/6 to 220/9Tubular steel frame with flexible middle section, over which an elas-tic mesh is stretched and the whole is moulded in foam. Integral foam armrests, leather-covered, with fab-ric covers in black, covered in leath-er according to the colour of the leather. Cover with stitched fluting exchangeable, or cover with inte-grated flat cushion, exchangeable.

StandardsFS task chairs are compliant with the DIN EN 1335, DIN EN 16139-L1, the ANSI / BIFMA X 5.1 and other in-ternational office chair standards. Depending on the version they also fulfil the requirements of catego-ries B or C of the DIN EN 1335 office chair standard. FS cantilever chairs comply with DIN 68878-1.

The FS task chairs comply with the “Ergonomics Approved“ standard.


39

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors.

Standard height backrest¡ 42/53 ¶ 88/99 ¢ 63 | 60 (¡ 16½"/20⅞" ¶ 34⅝"/39" ¢ 24¾" | 23⅝")

211/8One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 825 871

Additional charge/reduced pricesHeight-adjustable lumbar support 61 61

Frame aluminium polished 46 46Frame aluminium bright chrome plated 95 95

Anti-static castors 45 45


High backrest¡ 42/53 ¶ 105/116 ¢ 65 | 62 (¡ 16½"/20⅞" ¶ 41⅜"/45⅝" ¢ 25⅝" | 24⅜")

213/8One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 959 1005

Additional charge/reduced pricesHeight-adjustable lumbar support 61 61

Frame aluminium polished 46 46Frame aluminium bright chrome plated 95 95

Anti-static castors 45 45


Counter chair¡ 67/80 ¶ 113/126 ¢ 69 | 66 (¡ 26⅜"/31½" ¶ 44½"/49⅝" ¢ 27⅛" | 26")

211/11One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable)Frame aluminium coated 1025 1071

Additional chargesFrame aluminium polished 46 46Frame aluminium bright chrome plated 95 95

Counter chair¡ 52/63 ¶ 109/120 ¢ 65 | 63 (¡ 20½"/24¾" ¶ 42⅞"/47¼" ¢ 25⅝" | 24¾")

211/1One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring (not height adjustable)Frame aluminium coated 1106 1152

Additional chargesFrame aluminium polished 46 46Frame aluminium bright chrome plated 95 95

FS-Line Task chairs Counter chairs

Upholstery material54 60

63 66 67 69

€ €

40

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).

Medium-height backrest¡ 42/52 ¶ 92/102 ¢ 67 | 63 (¡ 16½"/20½" ¶ 36¼"/40⅛" ¢ 26⅜" | 24¾")

220/8One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 2334 2334 2967 (2967)*

Additional chargesSlim cushion* Leather 87 available with slim cushion only

192 192 270 675

Frame aluminium polished 46 46 46 46 46Frame aluminium bright chrome plated 95 95 95 95 95

Anti-static castors 45 45 45 45 45

High backrest¡ 42/52 ¶ 108/118 ¢ 67 | 63 (¡ 16½"/20½" ¶ 42½"/46½" ¢ 26⅜" | 24¾")

220/9One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 2710 2710 3458 (3458)*


237 237 301 757


Anti-static castors 45 45 45 45 45

FS-Line Task chairs


62 69 74 87

€ € € € €

41

All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Standard height backrest¡ 44 ¶ 89 ¢ 63 | 60 (¡ 17⅜" ¶ 35" ¢ 24¾" | 23⅝")

211/6Swivel-mounted, One-piece seat and back shell, upholstered, Automatic synchro-adjustment, tension controlFrame aluminium coated 735 781 781

Additional chargesFrame aluminium polished 46 46 46Frame aluminium bright chrome plated 95 95 95

Medium-height backrest¡ 42 ¶ 92 ¢ 67 | 63 (¡ 16½" ¶ 36¼" ¢ 26⅜" | 24¾")

220/6Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension controlFrame aluminium coated 2244 2244 2877 (2877)*


192 192 270 675


High backrest¡ 42 ¶ 108 ¢ 67 | 63 (¡ 16½" ¶ 42½" ¢ 26⅜" | 24¾")

220/7Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension controlFrame aluminium coated 2620 2620 3368 (3368)*


237 237 301 757


FS-Line Conference chairs/visitor chairs


63 66 67

62 69 74 87

€ € € € € €

42


Standard height backrest¡ 44 ¶ 85 ¢ 56 | 61 (¡ 17⅜" ¶ 33½" ¢ 22" | 24")

212/5One-piece seat and back shell, upholstered,Frame coated 527 573

Additional chargesFrame bright chrome plated 35 35Stackable version (in combination with frame bright chrome plated only, stackable 5-high free-standing, up to 8-high on four-wheeled trolley) 73 73

FS-Line Cantilever chairs


63 66 6769

€ €

43


FS-Line Accessories

€

44


51 Bright chrome plated

Small components Castors or glides, frame components, armrests, adjustment levers

41 Black

21 rangeFS ManagementDesign: Klaus Franck, Werner Sauer, wiege

Technical details

FunctionTask chairs with automatic synchro-adjustment: the seat and backrest automatically tilt to any posture the person adopts. When leaning back, the backrest tension increases proportionately. The person using the chair can infinitely adjust the tension. The front position is locka-ble by engaging the lever. DIN 4550 compliant gas lift for infinite adjust-ment of the seat height.

FrameDie-cast aluminium, bright chrome plated star base. Twin wheel swivel castors with load-dependent brak-ing, made of black polyamide in accordance with DIN EN 12529 as the standard version for carpets; with grey soft polyurethane facing for hard floors. Castors optionally electrically conductive. Black poly-amide glides as the standard ver-sion for carpets and in black polyure thane for hard floorings.Die-cast aluminium, bright chrome plated swivel arms.

Seat and back Steel tube frames with a flexible middle section, covered with elastic mesh. Foam upholstery with addi-tional cushioning. Exchangeable cover with wider stitched fluting. Integral foam armrests, leather- covered with stitched seam.

StandardsThe FS task chairs comply with DIN EN 1335, ANSI / BIFMA X 5.1 and other international office chair standards. Depending on the version they also fulfil the require-ments of categories B or C of the DIN EN 1335 office chair standard.

StandardsThe prices for types with cushion-ing that includes fabrics and leather provided by the customer are given on request.

45


Medium-height backrest¡ 42/52 ¶ 100/110 ¢ 67 | 63 (¡ 16½"/20½" ¶ 39⅜"/43¼" ¢ 26⅜" | 24¾")

220/82One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium bright chrome plated 2688

Additional chargeAnti-static castors 45

High backrest¡ 42/52 ¶ 116/126 ¢ 67 | 63 (¡ 16½"/20½" ¶ 45⅝"/49⅝" ¢ 26⅜" | 24¾")

220/92One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium bright chrome plated 3114

Additional chargeAnti-static castors 45

FS Management Task chairs

Upholstery material74

€

46

Frame versions Four-leg chairs and star-base frames 51 Bright chrome plated85 Grey coated textured matt finish (Pantone Cool Gray 10 C)86 Grey-beige coated textured matt finish (Pantone 7530 C)87 Orange-red coated textured matt finish (Pantone 2349 C)88 Blue-grey coated textured matt finish (Pantone 2178 C)90 Black coated textured matt finish (RAL 9011)91 White coated with textured matt finish (RAL 9016)

222 rangeOccoDesign: Jehs+Laub

Technical details

Function In conference rooms, open-plan meeting areas or company restau-rants: Occo offers superior comfort, enormous versatility and a vast range of design options in a distinc-tive design language.

Chairs

Frame Four-leg models 222/10, 222/11, 222/12 Tubular steel frame with textured matt finish coated in white, black, grey, grey-beige, orange-red, blue-grey or bright chrome-plated.

Please note: Coated frame versions aren’t stackable.

Model 222/10 (shell with no upholstery) with four separators made of PUR and frame cover made of plastic (PP) each in dark grey.Models 222/11 and 222/12 with stacking guard made of plastic (PP) in dark grey.

Four-leg frame in solid wood models 222/20, 222/21, 222/22Seat bearer made of tubular steel in dark grey with a textured matt fin-ish to fit onto the seat shell and to attach the four legs made of solid oak with a natural oiled finish.

Four-star base models 222/30, 222/31, 222/32 Five-star base models 222/40, 222/41, 222/42Butted tubular steel with a textured matt finish coated in white, black, grey, grey-beige, orange-red, blue-grey or bright chrome-plated with seat bearer made of moulded flat steel in dark grey with a textured matt finish to attach to the shell. In the case of four-star bases the steel glides are in dark grey with a tex-tured matt finish.Four-leg and four-star base models are fitted with multipurpose glides for soft and hard floorings. For sen-sitive floorings order with extra felt glides (at no additional charge). Five-star base models 222/40, 222/41, 222/42 with twin wheel swivel castors with load-dependent braking, made of black polypropyl-ene compliant with DIN EN 12529 as the standard version for carpets, optionally with grey polyurethane tyre for hard floors.

Seat and back Unitary, ergonomically moulded seat shell with cut-out section, made of reinforced through-dyed polypropylene optionally in white, black, grey, grey-beige, orange-red or blue-grey.

Models 222/10, 222/20, 222/30, 222/40 optionally with felt seat cushion with anti-slip coating. In anthracite, light mottled, graphite, mango, verde, deep water.Models 222/11, 222/21, 222/31, 222/41, with seat cushion and models 222/12, 222/22, 222/32, 222/42 with padding on the inside made of cut foam in each case.

Please note: To ensure quality is maintained we don’t offer white leather (74/72). All other standard leather colours are possible.

When exposed to ultra violet rays for long periods of time, the colours of plastics can change slightly.

47

Multi-purpose chair¡ 44 ¶ 82 ¢ 57 | 58 (¡ 17⅜" ¶ 32¼" ¢ 22½" | 22⅞")

222/10Four-leg frame, not upholstered Frame coated, colour matched with the shell, Not stackable 198Bright chrome-plated frame, up to 10 stackable free-standing 198

Accessories186 Four-wheeled trolleyfor 10 multipurpose chairs 293222 Felt cushionwith non-slip coating, available in 6 colours 41


222/11Four-leg frame with seat cushion Frame coated, colour matched with the shell, Not stackable 272 310 325 374 430Bright chrome-plated frame, up to 6 stackable free-standing 272 310 325 374 430

Accessories186 Four-wheeled trolleyfor 6 multipurpose chairs 293


222/12Four-leg frame with padding on inside Frame coated, colour matched with the shell, Not stackable 419 483 505 661 829Bright chrome-plated frame, up to 4 stackable free-standing 419 483 505 661 829

Accessories186 Four-wheeled trolleyfor 4 multipurpose chairs 293

All chairs are fitted with multipurpose glides for soft and hard floorings, in the case of sensitive floorings please order with extra felt glides (at no additional charge).

Occo Multi-purpose chair


63 66 6769

74 87

€ € € € € €

48

Multi-purpose chair¡ 44 ¶ 82 ¢ 57 | 55 (¡ 17⅜" ¶ 32¼" ¢ 22½" | 21⅝")

222/20Solid wood four-leg frame, oak, natural oiled finish not upholstered Not stackable 345

Accessories222 Felt cushionwith non-slip coating, available in 6 colours 41


222/21Solid wood four-leg frame, oak, natural oiled finish with seat cushion Not stackable 419 457 472 521 577


222/22Solid wood four-leg frame, oak, natural oiled finish with padding on inside Not stackable 566 630 652 808 976




63 66 6769

74 87

€ € € € € €

49

Multi-purpose chair¡ 43 ¶ 83 ¢ 58 | 56 (¡ 16⅞" ¶ 32⅝" ¢ 22⅞" | 22")

222/30Four-star base frame, not upholstered, swivel-mounted Frame coated, colour matched with the shell 408Frame bright chrome plated 408



222/31Four-star base frame with seat cushion, swivel-mounted Frame coated, colour matched with the shell 482 520 535 584 640Frame bright chrome plated 482 520 535 584 640


222/32Four-star base frame with padding on inside, swivel-mounted Frame coated, colour matched with the shell 629 693 715 871 1039Frame bright chrome plated 629 693 715 871 1039




63 66 67 69

74 87

€ € € € € €

50


222/40Five-star base frame, not upholstered on castors, swivel-mounted Frame coated, colour matched with the shell 419Frame bright chrome plated 419



222/41Five-star base frame on castors, with seat cushion, swivel-mounted Frame coated, colour matched with the shell 492 530 545 594 650Frame bright chrome plated 492 530 545 594 650


222/42Five-star base frame on castors, with padding on inside, swivel-mounted Frame coated, colour matched with the shell 639 703 725 881 1049Frame bright chrome plated 639 703 725 881 1049

Five-star base frames are fitted with castors for soft floorings. Please order with soft castors (at no extra charge) for hard flooring (e.g. stone, parquet)..



63 66 6769

74 87

€ € € € € €

52

E4 – 1 solid wood edge, rounded on the bottom

E2 – 3 Straight plastic edging

E2 – 5 Chamfered wood edging, 12 mm (1/2”)

E5 – 1 HPL solid core, Edge chamfered, 4 mm radius

Frame versions Tables 51 Bright chrome plated90 Black coated textured matt finish (RAL 9011)91 White coated with textured matt finish (RAL 9016)

222 rangeOccoDesign: Jehs+Laub

Technical details

Tables

Frame Models 222/60 and 222/70 with four-star bases, table legs made of butted tubular steel, optionally with a textured matt finish coated black or white or bright chrome-plated. Models 222/80 and 222/90, table legs connected with a cross-beam. Models as of 90 x 180 incl. extra reinforcement uprights in dark grey textured matt finish. All table top bearers and glides made of steel in dark grey with a textured matt finish. All tables are fitted with multipur-pose glides for soft and hard floor-ings. For wood floorings (e.g. par-quet) order with extra felt glides (at no additional charge). Adjustment range: 10 mm. Optional lockable, height adjustable, swivel castors with a black polyamide tyre as the standard version for carpeted floors; castors available with a poly-urethane tyre for hard floors (please specify when ordering).

Core material of table top Table top group 2 – veneer variation 1 and 2Table top group 2 – veneer variation 1 and 2MDF (medium density fibreboard), table top thickness 26 mm, Variation 1:Beech, oak or ash veneer from Wilkhahn wood-stain colour sam-ples with chamfered wood lipping (exception: not in natural ash), col-our matched as far as possible with the veneer.Variation 2:Maple (exception: no natural ma-ple), walnut or elm veneers, as well as Wilkhahn Mocca veneer from the Wilkhahn woodstain colour samples with chamfered wood lipping, colour matched as far as possible with the veneer. Table height 74.4

Table top group 5 – with direct coatingTable top thickness 25 mm thick, melamine resin, with direct coating in white or black with straight plas-tic lipping colour matched with the surface. Table height 74.3

Table top group 7 – black/white through-dyedTable top thickness 12 mm. Table top made of through-dyed HPL (High Pressure Laminate) in black or white, chamfered lipping. Table height 73

Table top group 10 – solid woodTable top thickness 25 mmSolid oak based on the Wilkhahn woodstain colour samples, natural oiled finish, lipping, rounded on the bottom. Table height 74.3

53

Square 222/6090 x 90 (35⅜" x 35⅜") For 4 peopleFrame coated 782 929 1008 1234 1344 1664Frame bright chrome plated 882 1029 1108 1334 1444 1764

Additional chargeCastors 20

Round 222/70Ø 100, (Ø 39⅜") For 4 peopleFrame coated 788 935 1024 1245 1360 1678Frame bright chrome plated 888 1035 1124 1345 1460 1778


Rectangular 222/8080 x 160 (31½" x 63") For 4 – 6 peopleFrame coated 1038 1207 1322 1605 1748 2362Frame bright chrome plated 1164 1333 1448 1731 1874 2488

90 x 180, (35⅜" x 70⅞") For 6 peopleFrame coated 1107 1296 1437 1763 1947 2866Frame bright chrome plated 1233 1422 1563 1889 2073 2992

90 x 190 (35⅜" x 73¾") For 6 peopleFrame coated 1128 1333 1485 1836 2036 2997Frame bright chrome plated 1254 1459 1611 1962 2162 3123


Oval 222/9090 x 180, (35⅜" x 70⅞") For 6 peopleFrame coated 1108 1297 1438 1763 1948 2867Frame bright chrome plated 1234 1423 1564 1889 2074 2993

90 x 200 (35⅜" x 78¾") For 6 peopleFrame coated 1150 1371 1532 1911 2127 3128Frame bright chrome plated 1276 1497 1658 2037 2253 3254


Occo Tables

Table top group5 7 7 2 2 10

Bon

ded

surf

ace

Blac

k th

roug

h-dy

ed

Whi

te th

roug

h-dy

ed

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Solid

woo

d

€ € € € € € €

54

230 rangeAlineDesign: Andreas Störiko

Technical details

FunctionStylish and coherently designed, multipurpose furnishing range for meetings, consultations and semi-nars, in showrooms and event spac-es, areas for breaks, lounges and bistros, as well as libraries, internet cafés or home offices.

Multipurpose chairLight, transparent and stackable multipurpose chair for meetings, consultations, seminars and large-scale events. Very compact, form-fit stacking, with each chair adding only 20 mm (¾") to the height of the stack due to self-engaging, covered seat and back frames (to-tal height of 15 stacked chairs is 106 cm (41¾“) and in model 233 only 109 cm). Weight only 5.1 kg (without armrests) or 5.4 kg (with armrests). Model 233 only weighs 5.9 kg (without armrests) or 6.2 kg (with armrests).

Multipurpose chair, optionally with seat cushion, available as a stacka-ble or a non-stackable version. The stackable types have extra stacking bumpers and can be stacked ex-tremely compactly in a form-fit manner.

Counter/bar stoolStylish and transparent bar stool with backrest and footrest bar, optionally with seat cushion.

Task chairs and visitor chairsSimple, transparent visitor task chairs and height-adjustable office task chairs for meetings and consul-tations, Internet cafés, showrooms and hot desking spaces.

TablesSquare and round top column ta-bles in low, sitting and standing heights (optionally stackable) and rectangular tables on a T-shaped base for lounges and recreational areas, cafeterias and bistros.

Chairs

Frame

Multipurpose chairMultipurpose chair: Skid base made of tubular steel 12 mm in diameter, bright chrome-plated, supports the seat frame at the front and contin-ues at the rear through the seat frame to the back frame. On re-quest, with additional glides in black plastic for all types of floor-ing optionally with extra felt insert.

When ordering inline connector 238, multipurpose glides are auto-matically applied, optionally with extra felt insert for flooring that easily scratches (e.g. stone, par-quet). 231 Inline connectors cannot be used for models 233/1 and 233/2.

Counter/bar stoolLike the multipurpose chair, but can’t be stacked, extra strength provided by bright chrome-plated flat steel stretchers (16 x 6 mm - 5/8" x ¼") and a footrest set further back made of tubular steel.

Task chair and visitor chairsFour-star base (visitor chair) or five-star base (task chair) in die-cast alu-minium, bright chrome plated. Task chair with black polyamide glides (for soft flooring), or black polyure-thane (for hard flooring), optionally with additional felt insert. Task chair with twin wheel swivel cas-tors in black polypropylene with load dependent braking (for soft floors) or with a soft tyre (for hard floors); anti-static castors on re-quest. Fixed height swivel pedestal with contact suppression feature (visitor chair) or additional infinitely height adjustable swivel-mounted column (task chair), bright chrome-plated tube.

Seat and backIn models 230/1, 230/2, 230/5, 230/6 seat and back frames in very strong, glass-fibre-reinforced poly-amide, optionally through-dyed in black, grey or white, with high per-formance coated polyester fabric optionally in the same colour as the seat and back frames. When the seat- and backrest frame are black through-dyed, two-colour cover in copper-black or silver-black possi-ble as well. Optionally with or with-out armrests in the same material or colour. Optionally with a poly-propylene seat shell and cut-foam seat cushion. Stackable types (only

models 233/1 and 230/2) with glass-fibre-reinforced polyamide stacking bumper that colour-matches the seat and backrest frame.Models 233/1, 233/2, 233/4, 233/6Seat and back frame are made of high-performance glass-fibre-rein-forced polyamide, optionally black or white through-dyed, optionally with or without armrests in the some material and colour. The plas-tic membrane is made of through-dyed polyamide like the seat and back frame. Optionally with cut foam seat cushioning. Stackable types (only models 233/1 and 233/2) with glass-fibre-rein-forced polyamide stacking bumper that colour-matches the seat and backrest frame. Task and visitor chairs (mod-els 232 / 1, 232 / 2, 231 / 1, 231 / 2) optionally with cut-foam seat cush-ion, with cover in stitched fluting, cushioning 10 mm thick.

Tables

FrameModels 235/236Four-star base in die-cast alumini-um, bright chrome plated, with glides in black polyamide (for soft floors) or black polyurethane (for hard floors), optionally with addi-tional felt insert. Table column in 4 mm (⅛") thick steel tubing, di-ameter 40 mm (15/8"), for low, sit-ting and standing height (45 / 73 / 105 cm) (17¾"/ 28¾/ 41⅜"), coated in black or white to match the table top, with round steel flange coated black; stackable version additional-ly with slip-free separator, collar and docking guide in black plastic.

Model 237/00Unitary, die-cast aluminium foot section, optionally bright chrome-plated, or coated in black or white. Black polyamide glides (for soft flooring), or black polyurethane (for hard flooring), optionally with addi-tional felt insert.Aluminium upright to match the table top, black or white coated, or optionally bright chrome plated. Underframes made of rectangular steel tubing with flange, coated black or white depending on the foot section. If the foot section is bright chrome-plated, black coat-ing.

55

Frame versions Multi-purpose and counter chairs Frame


Task chair and visitor chair Frame


Tables (235 / 1 – 236 / 3) Star base Table column

51 Bright chrome plated Coated, black or white

Tables (237 / 00) Foot sections Upright Underframe

49 Coated white Coated white Coated white

51 Bright chrome plated Black coated or bright chrome plated

Coated black

53 Coated black Coated black Coated black

Tables (237 / 2, 4, 5, 6) Disc base with cover Table column Table top bearer

49 Coated white Coated white Coated black


71 Polished stainless steel coated or bright chrome plated

Coated black

Core material of table top mod-els 235 / 236 / 237Table top made of through-dyed HPL (High Pressure Laminate) in black or white. Each table top 12 mm thick.

Models 235 / 236 in sizes: 60 x 60 cm (235/8" x 235/8") (for table heights 45 (17¾") and 105 cm (41⅜")) and 70 x 70 cm (27½" x 27½") (for table heights 73 cm (28¾")) and round, diameter 75 cm (29½") (for table heights 45 (17¾") and 73 cm (28¾") and diameter 70 cm (27½") (for table height 105 cm (41⅜")).

237 models in the following sizes:(Table height 73 cm)70 x 140 cm75 x 150 cm80 x 160 cm90 x 180 cm90 x 200 cm

In the version with veneer (on request):MDF (medium density fibreboard) panel only in combination with ve-neered surface finish with colour-matched, chamfered wood lipping (with a radiused edge). Exception: maple or ash with natural finishes are not available.

Table top group 2 – veneerTable top thickness 20 mm Variant 1: beech or oak veneer based on Wilkhahn woodstain col-our samples with wood lipping, to colour match the veneer as far as possible. Variant 2: walnut or elm veneer as well as Wilkhahn Mocca veneer based on the Wilkhahn woodstain colour samples with wood lipping to col-our match the veneer as far as pos-sible.

Veneer typesAs a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: oak, walnut and elm ve-neer, as well as Wilkhahn Mocca ve-neer closed-pore: beech veneer.Some specific growth features pos-sible.

TablesRound column tables in four differ-ent formats (Ø 90 – 140 cm) for large conferences, meetings or as home dining tables.

Frame models 237/2, 4, 5Steel disc base (Ø 610 mm) with sheet steel cover, coated in white or black, or with optional ultra-pol-ished stainless steel cover.

Tubular steel table column (Ø 80 mm), white or black coated, option-ally bright chrome-plated. Rectan-gular tube table top bearer, coated in black.

Frame model 237/6Steel disc base (Ø 735 mm) with sheet steel cover, coated in white or black, or with optional ultra-pol-ished stainless steel cover.

Tubular steel table column (Ø 80 mm), white or black coated, option-ally bright chrome-plated. Rectan-gular tube table top bearer, coated in black.

Core material of table top models 237/2, 4, 5, 6MDF table top (medium density fi-breboard), white, or black powder coated with chamfered edge. Each table top 25 mm thick.

AccessoriesOptional for multipurpose chair: automatically retractable inline connectors type 231 (only models 230/1, 230/2) made of matt chrome-plated steel. Inline connec-tors, type 238, only with special multi-purpose glides made of black POM for hard and soft floorings, or with extra felt for flooring that easi-ly scratches. Chairs with armrests can only be linked alternately with chairs with no armrests. Stackable four-wheeled trolley made of black-coated tubular steel with four ball-bearing mounted wheels for hard and soft floorings, two of which are lockable directional wheels.

StandardsThe stackable Aline chairs comply with the DIN EN 16139-L1 and ANSI/BIFMA X 5.1 office chair standard.

56

Black, multipurpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case). On request with black polyamide glides so that the seating can be used on different floorings, optionally with extra felt insert (for flooring that easily scrat-ches like stone or parquet). Stackable chairs with armrests only alternately with stackable chairs that have no armrests.

Multi-purpose chair¡ 44 ¶ 78 ¢ 54 | 58 (¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")

233/1Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membraneFrame bright chrome plated 238

Additional chargesInline connector * 34Higher backrest (overall height 80 cm, 31½") 17Seat cushion 113 126 141Seat cushion, stackable version, up to 10 chairs 130 145 158

Multipurpose glides (for soft and hard floorings) 8 8 8 8Multi-purpose glides with felt insert 12 12 12 12


233/2With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membraneFrame bright chrome plated 278

Additional chargesInline connector * 34Higher backrest (overall height 80 cm, 31½") 17Seat cushion 113 126 141Seat cushion, stackable version, up to 10 chairs 130 145 158


Counter/bar height stool¡ 69 ¶ 105 ¢ 54 | 61 (¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")

233/4Footrest, Seat and back frame with plastic membraneFrame bright chrome plated 354

Additional chargesSeat cushion 113 126 141



233/6With armrests Footrest, Seat and back frame with plastic membraneFrame bright chrome plated 394



* Inline connectors only possible in combination with special multi-purpose glides

Aline-S Chairs


636667

€ € € €

57

Black, multipurpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case). On request with black polyamide glides so that the seating can be used on different floorings, optionally with extra felt insert (for flooring that easily scratches like stone or parquet). Stackable chairs with armrests only alternately with stackable chairs that have no armrests.


230/1Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membraneFrame bright chrome plated 352

Additional chargesInline connector 43Higher backrest (overall height 80 cm, 31½") 17Seat cushion 98 110 123Seat cushion, stackable version, up to 10 chairs 114 127 143

Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23 23 23 23Outdoor version 13 13 13 13Multipurpose glides (for soft and hard floorings) 8 8 8 8Multi-purpose glides with felt insert 12 12 12 12


230/2With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membraneFrame bright chrome plated 392

Additional chargesInline connector 43Higher backrest (overall height 80 cm, 31½") 17Seat cushion 98 110 123Seat cushion, stackable version, up to 10 chairs 114 127 143



230/5Footrest, Seat and back frames with membraneFrame bright chrome plated 467




230/6With armrests Footrest, Seat and back frames with membraneFrame bright chrome plated 507



Aline Chairs


636667

€ € € €

58

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). All visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Task chair¡ 40/52 ¶ 76/88 ¢ 65 | 64 (¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")

232/1Seat and back frames with membrane, Infinitely variable height adjustmentFrame bright chrome plated 564

Additional chargesHigher backrest (overall height 78/90 cm, 30¾"/35⅜") 17Anti-static castors 45

Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only) 116

Task chair¡ 40/52 ¶ 76/88 ¢ 65 | 64 (¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")

232/2With armrests, Seat and back frames with membrane, Infinitely variable height adjustmentFrame bright chrome plated 604

Additional chargesHigher backrest (overall height 78/90 cm, 30¾"/35⅜") 17Anti-static castors 45


Visitor chair¡ 45 ¶ 80 ¢ 50 | 57 (¡ 17¾" ¶ 31½" ¢ 19⅝" | 22½")

231/1Seat and back frames with membraneFrame bright chrome plated 540

Additional chargesHigher backrest (overall height 82 cm, 32¼") 17


Visitor chair¡ 45 ¶ 80 ¢ 59 | 57 (¡ 17¾" ¶ 31½" ¢ 23¼" | 22½")

231/2With armrests, Seat and back frames with membraneFrame bright chrome plated 580

Additional chargesHigher backrest (overall height 82 cm, 32¼", armrests not below table height) 17


Aline Task/visitor chairs

€

59

All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Square 235/1Low table 60 x 60, H 45 (23⅝" x 23⅝", H 17¾") Star base bright chrome platedCoated column 533 626

Additional chargeCentral column bright chrome plated 22 22

Square 235/2Table 70 x 70, H 73 (27½" x 27½", H 28¾") Star base bright chrome platedCoated column 617 779


Square

235/3High table 60 x 60, H 105 (23⅝" x 23⅝", H 41⅜") Star base bright chrome platedCoated column 561 654

Additional chargesCentral column bright chrome plated 60 60Stackable design (up to 3 free-standing) 125 125

Round 236/1Low table, circular, Ø 75, H 45 (Ø 29½", H 17¾") Star base bright chrome platedCoated column 611 773


Round 236/2Table circular, Ø 75, H 73 (Ø 29½", H 28¾") Star base bright chrome platedCoated column 621 783


Round

236/3High table, circular, Ø 70, H 105 (Ø 27½", H 41⅜") Star base bright chrome platedCoated column 634 796

Additional chargesCentral column bright chrome plated 60 60Stackable design (up to 3 free-standing) 125 125

Aline Tables

Table top group7 7

Blac

k th

roug

h-dy

ed

Whi

te th

roug

h-dy

ed

€ €

60

Round 237/2Table, Ø 90 cm, H 73 cm (Ø 35⅜", H 28¾") Coated disc base Coated column 798

Additional chargesDisc base with ultra-polished, stainless steel cover, coated table column 87Disc base with ultra-polished, stainless steel cover, bright chrome plated table column 151

Round 237/4Table, Ø 110 cm, H 73 cm (Ø 43¼", H 28¾") Coated disc base Coated column 1011


Round 237/5Table, Ø 125 cm, H 73 cm (Ø 49¼", H 28¾") Coated disc base Coated column 1126


Round 237/6Table, Ø 140 cm, H 73 cm (Ø 55⅛", H 28¾") Coated disc base Coated column 1604


Aline Tables

Table top group9

MD

F bl

ack

or w

hite

pow

der

coat

ed

€

61

All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Rectangular 237/00e.g. 75 x 150, H 73 (29½" x 59", H 28¾") Foot sections coatedUprights and under-frames coated 893 1111

Additional chargesFoot sections bright chrome plated 61 • •Uprights bright chrome plated 85 • •

Depth

Length70

(27½")75

(29½")80

(31½")90

(35⅜") 140 (55⅛") 890 – – – 150 (59") – 893 – – 160 (63") – – 898 – 180 (70⅞") – – – 990 200 (78¾") – – – 995

140 (55⅛") 1096 – – 150 (59") – 1111 – – 160 (63") – – 1127 – 180 (70⅞") – – – 1282 200 (78¾") – – – 1301

• available – not available

Aline Tables

Table top group

7 7

Blac

k th

roug

h-dy

ed

Whi

te th

roug

h-dy

ed

€ € €

62

Inline connector 231(for models 230/1 and 230/2) 43

Four-wheeled trolley 232for 20 multi-purpose chairs 567

Seat/row number clip 234(for models 230/1 and 230/2) 9

Sheets of self-adhesive labels for numbering

2351 set (1 – 400 for seats and 1 – 100 for rows)

19

Four-wheeled trolley 236for 15 multi-purpose chairs with seat cushion 567

Inline connector 238(for models 233/1 and 233/2)with glides for soft floorings. 34

(for models 230/1 and 230/2)with glides with felt insert 38

58

12

34

56

78

910 11 12 13 14 15 16

17 18 19 20 21 22 23 24

25 26 27 28 29 30 31 32

33 34 35 36 37 38 39 40

41 42 43 44 45 46 47 48

49 50 51 52 53 54 55 56

57 58 59 60 61 62 63 64

65 66 67 68 69 70 71 72

73 74 75 76 77 78 79 80

81 82 83 84 85 86 87 88

89 90 91 92 93 94 95 96

97 98 99

Aline Accessories

€

64

Frame versions 51 Bright chrome plated53 Coated black58 Matt chrome plated60 Coated, silver satin finish

240 rangeSitoDesign: wiege

Technical details

FunctionA multipurpose cantilever chair, op-tionally stackable, with three back-rest heights and a range of uphol-stery options and ideal for a whole host of settings. It’s springy and re-silient due to the cantilever design of the seat and back.

FrameBase frame made of round steel tube, Ø 22 mm (⅞"). Brace in 6 mm (¼”) flat steel to support the canti-levered the seat and backrest shells, bright chrome plated, matt chrome plated or coated. The standard ver-sion for carpeted floors comes with anti-tilt stoppers; with additional glides for hard floors, with addi-tional felt insert on request. The stackable versions are only availa-ble with a bright chrome plated frame.All models can also be fitted with a writing tablet (models 240/3, 241/3) in black plastic, which still al-lows chairs to be linked with inline connectors or stacked.

Seat and backrest

Models 240/3 and 241/3Seat and back made of black-grey or white through-dyed viscoelastic polypropylene. Seat with covered, one-piece moulded polyurethane foam, exchangeable; optional back cushioning also with covered, poly-urethane cut foam.

Model 241/51 with club upholsterySeat and back made of moulded plywood with polyurethane one-piece moulded foam and wool fleece, covered on all sides with leather, leather-covered cushioning with embossed facings on the sides.

Model 244/55Seat and back made of viscoelastic polypropylene, covered on the back. Replaceable seat cushioning with covered polyurethane mould-ed foam section, with additional cut foam section and padding. Re-placeable back cushioning with covered polyether cut foam section and padding.

Model 245/55Seat made of viscoelastic polypro-pylene, covered on the back. Re-placeable seat cushioning with cov-ered polyurethane moulded foam section, with additional cut foam section and padding. Back made of moulded plywood. Back cushion-ing with covered polyether cut foam section and padding.

Models 247/55 and 248/55 with soft fill cushionsSeat and back made of moulded plywood. Seat with covered polyu-rethane one-piece moulded foam, backrest with covered polyure-thane one-piece moulded foam, on the front with concealed cut foam fleece concealed in the cover.

ArmrestsArmrest pads made of black or white through-dyed polypropylene or laminated wood with face ve-neer in beech with a natural finish or stained 84/83 grey or 84/89 dark grey, or face veneer in maple with a natural finish. Upholstered arm-rests, when covered in fabric with black leather 74/99, when covered in leather to match the colour of the leather (models 240/51, 241/51 only covered in leather).

StandardsThe Sito cantilever chairs comply with the DIN EN 16139-L1, DIN EN 1728 and ANSI/BIFMA X5.1 office chair standards.


65


Low backrest¡ 43 ¶ 77 ¢ 59 | 56 (¡ 16⅞" ¶ 30⅜" ¢ 23¼" | 22")

240/3With seat cushion, backrest not upholstered, Polypropylene armrest padsFrame coated 491 504 643

Additional chargesBack cushion 76 76 152Seat/back shell and armrest pad through-dyed white 32 32 32Stackable version (in combination with frame bright chrome plated only, stackable 7-high free-standing, up to 8-high on four-wheeled trolley) 46 46 46

Frame bright chrome plated 32 32 32Frame matt chrome plated 89 89 89

Medium-height backrest¡ 43 ¶ 87 ¢ 59 | 57 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")

241/3With seat cushion, backrest not upholstered, Polypropylene armrest padsFrame coated 565 578 717

Additional chargesBack cushion 76 76 182Seat/back shell and armrest pad through-dyed white 32 32 32Stackable version (in combination with frame bright chrome plated only, stackable 7-high free-standing, up to 8-high on four-wheeled trolley)

46 46 46


Medium-height backrest¡ 43 ¶ 87 ¢ 59 | 56 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22")

241/51Club upholstery, fully upholstered, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seamFrame coated 1537 1792

Additional chargesFrame bright chrome plated 32 32Frame matt chrome plated 89 89

Sito Cantilever chairs


62 63 66 67 69

74 87

€ € € €

66



244/55With seat and back cushion, fully upholstered, Polypropylene armrest padsFrame coated 862 1131


Laminated wood armrest pads 92 92Cushioned armrest pads 216 216

High backrest¡ 43 ¶ 97 ¢ 59 | 58 (¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")

245/55With seat and back cushion, fully upholstered, Polypropylene armrest padsFrame coated 917 1231




247/55Soft fill cushions, fully upholstered, Polypropylene armrest padsFrame coated 907 1176



High backrest¡ 43 ¶ 97 ¢ 59 | 58 (¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")

248/55Soft fill cushions, fully upholstered, Polypropylene armrest padsFrame coated 962 1276



Sito Cantilever chairs


74

€ €

67

Writing tablet 240(right or left side) 176

Inline connector 24213


Seat numbers 3103

20

5

Sito Accessories

€

68

249 rangeCuraDesign: wiege

Technical details

FunctionWith a lightweight appeal, these classically elegant lounge chairs and low tables are designed to fur-nish lounges, lobbies, informal meeting spaces or homes.

Chair

FrameModel 249 / 5 Resilient, bright chrome plated steel tube, diameter 25 mm (1"), thick ness 3 mm (⅛") attached to flat steel support ing frame, width 25 mm (1"), thickness 6 mm (2/8"). Four glides in black-grey polyamide are standard (for soft floors); op-tion ally in black-grey polyurethane (for hard floors), on request with additional felt insert.

Model 249 / 7 Die-cast aluminium, high-lustre polished, four-star base with rigid column and steel, bright chrome plated seat bearer. Black multipurpose plastic glides for all types of flooring.

UpholsterySteel frame in square tube with tension springs embedded in poly-urethane foam. Exchangeable, one-piece cover with side facings in high-quality woollen fabric or leather.

Armrests (only model 249 / 5)Armrests with contacts in plywood with fully upholstered pads to match the seat or with walnut face veneer, stained and protected with open-pore lacquer.

Stool

FrameDie-cast aluminium, high-lustre polished, star base with rigid col-umn and steel, bright chrome plat-ed seat bearer.Black, multi-purpose plastic glides for all types of flooring.

SeatShaped plywood shell with seating cushion, fully covered.

Tables

FrameBright chrome plated steel tube, di-ameter 25 mm (1"), thickness 3 mm (⅛"). Four glides in black-grey poly-amide are standard (for soft floors); optionally in black-grey poly ure thane (for hard floors), on request with additional felt insert.

Core material of table topParticle board, depending on the surface finish with straight, colour-matched plastic lipping or straight, colour-matched wood lipping.

Table top group 1 – laminateTable top thickness 20 mm (¾")Laminate according to Wilkhahn laminate colour samples (white, light grey or dark grey) with plastic lipping in the same colour as the table top.

Table top group 2 – veneerTable top thickness 20 mm (¾")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour sam-ples with wood lipping, as far as possible in the same colour as the veneer.Variation 2:Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.

Veneer versionAs a standard, veneers are slip matched onto the table top. Surfaces sealed with clear lacquer:Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca.Closed-pore: maple, beech veneer.Some specific growth features possible.

When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer.

StandardsThe Cura chairs and stools comply with the DIN EN 13761 office chair standard and DIN EN 1728.


69

All cantilever chairs, armchairs and tables are fitted with four glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Stool with multi-purpose glides.

Cantilever chair¡ 35 ¶ 75 ¢ 70 | 71 (¡ 13¾" ¶ 29½" ¢ 27½" | 28")

249/5Armrest pads in walnutFrame bright chrome plated 990 1195 1393

Additional chargeArmrests fully upholstered to match the seat covers 60 114 140

Chairs¡ 35 ¶ 75 ¢ 59 | 71 (¡ 13¾" ¶ 29½" ¢ 23¼" | 28")

249/7High-lustre polished frame 828 1033 1231

Stool 249/860 x 50, H 41 (23⅝" x 19⅝", H 16⅛")High-lustre polished frame 490 589 682

Square 249/154 x 54, H 36 (21¼" x 21¼", H 14⅛")Frame bright chrome plated 500 754 784

Rectangular 249/360 x 150, H 36 (23⅝" x 59", H 14⅛")Frame bright chrome plated 630 919 990

Low tables Table top group1 1 2

Lam

inat

e

Vene

er v

aria

tion

Vene

er v

aria

tion

€ € €

Cura Chairs


74 87

€ € €

70


51 Bright chrome plated52 Aluminium polished53 Coated black60 Coated, silver satin finish

Small components Castors, glides, frame components, adjustment levers

41 Black

26 rangeModus BasicDesign: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg

Technical details

FunctionTask chairs with backrest shell and automatic synchro-adjustment: the seat and backrest angle adjusts automatically to the position of the person sitting on chair. When lean-ing back, the backrest tension in-creases proportionately. The per-son sitting on the chair can adjust the tension precisely. The chair can be locked in the front position by engaging a lever. DIN 4550 compli-ant gas lift for precision adjustment of the seating height.

Frame

Task chairsFive-star, die-cast aluminium base, coated, polished or bright chrome plated.Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN 12529 as the standard ver-sion for carpets; with grey soft poly urethane tyre for hard floors. Castors optionally electrically con-ductive.Die-cast aluminium swing plates, coated in the same colour to match the star base, polished or bright chrome plated. Black-coated sheet steel mechanism cover.

Counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome plated, with lock screw to affix it and twin wheel swivel castors with load-de-pendent braking.

SeatSeat shell in black, viscoelastic poly-propylene. Cushioning: covered polyurethane one-piece moulded foam. Replaceable cover. Side fac-ing: black polyamide for fabric cov-er and embossed leather in the same colour for leather cover.

Backrest

Task chairsBackrest shell in black through-dyed, viscoelastic polypropylene with replaceable back cushioning in covered, cut foam and with inte-grated, adjustable lumbar support on request.

Armrests

Task chairsArmrests in black, glass-fibre-rein-forced polyamide.Task chair models 263/7 also with height adjustable armrests in the same material.

StandardsThe Modus Basic task chairs comply with the DIN EN 1335, ANSI / BIFMA X 5.1 and other international office chair standards.They meet the requirements of cat-egory B of the DIN EN 1335 office chair standard.


71


Standard height backrest¡ 42/53 ¶ 91/102 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")

263/7With seat and back cushion, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 981 1026 1422

Additional charge/reduced pricesFrame aluminium polished 45 45 45Frame aluminium bright chrome plated 123 123 123

Height adjustable armrests 110 110 110Height-adjustable lumbar support 61 61 61

Anti-static castors 45 45 45Without armrests – 90 – 90 – 90

Counter chair¡ 62/75 ¶ 111/124 ¢ 64 | 61 (¡ 24⅜"/29½" ¶ 43¾"/48⅞" ¢ 25¼" | 24")

263/1With seat and back cushion, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable)Frame aluminium coated 1154 1199 1595

Additional charge/reduced pricesFrame aluminium polished 45 45 45Frame aluminium bright chrome plated 123 123 123

Height adjustable armrests 110 110 110Height-adjustable lumbar support 61 61 61


Modus Basic Task chairs Counter chairs


62 63 66 67 69

74

€ € €

72

Frame versions Task chairs Star base, swing plates51 Bright chrome plated52 Aluminium polished53 Coated black60 Coated, silver satin finish

Visitor chairs Oval aluminium tube frame51 Bright chrome plated53 Coated black60 Coated, silver satin finish62 Clear anodized

Cantilever chair Round steel tube frame51 Bright chrome plated53 Coated black60 Coated, silver satin finish


41 Black

27 rangeModus CompactDesign: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg

Technical details

FunctionTask chairs with frame covering and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases accord-ing to the need for additional sup-port. Infinitely variable tension ad-justment for the user. Forward position lockable by engag ing le-ver. Gas lift, conforming to DIN 4550, for infinitely variable ad-justment of seat height.

Conference chairs / visitor chairs, swivel, with automatic synchro- adjustment, without front locking position, with fixed seat height, alternatively also available in a four-legged version or in a cantile-ver version, optionally stackable.

Frame

Task, conference and visitor chairsDie-cast aluminium star base, coated, polished or bright chrome plated.Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpet-ed floors, or in black polyurethane for hard floors. Die-cast aluminium swivel plates, coated to match the star base, polished or bright chrome plated. Synchro-mecha-nism case in sheet steel, coated black.

Visitor chair, four-legged:Legs in oval aluminium tube, bright chrome plated, clear anodized or coated. Black polyamide glides as the standard version for carpeted floors, or in black polyurethane for hard floors, optionally with addi-tional felt insert.

Cantilever chairsSteel tube frame, bright chrome plated, matt chrome plated or coat-ed, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with addi-tional felt insert. The stackable ver-sion is available with a bright chrome plated frame only.

SeatSeat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover.

Backrests

Task, conference and visitor chairsFrame in black, glass fibre-rein-forced polyamide. Exchangeable frame covering in black polyamide fabric, non-transparent or trans-parent. Non-transparent material optionally covered on the front and with cut foam underlay.Standard and medium-height backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same

colour leather for leather cover. High backrest with a shoulder sup-port with a forward curvature, cov-ered in embossed leather for fabric cover; in the same colour leather for leather cover. Backrests of task chairs 273, 274 and 275 optionally with integral, adjustable lumbar support (not possible for version with transparent material).

Cantilever chairsFrame in steel tube, bright chrome plated, matt chrome plated or coated.Exchangeable frame covering in black polyamide fabric, non-trans-parent or transparent. Non-trans-parent material optionally covered on the front and with cut foam underlay.Cantilever chairs 277/7 and 279/7 with a crescent shaped grip in black polypropylene; version with semi transparent material with a cres-cent shaped grip covered in black embossed leather for fabric or leather cover. Covered backrest with crescent shaped grip in black embossed leather for fabric cover; in the same colour leather for leather cover.

Armrests

Task, conference and visitor chairsArmrests in black, glass fibre-rein-forced polyamide, optionally height adjustable.

Visitor chairs, four-leggedArmrests in black, glass fibre- reinforced polypropylene.

Cantilever chairsArmrest pads in black polypropyl-ene or laminated beech, natural finish.

StandardsModus Compact task chairs and conference chairs / visitor chairs conform to the Office Chair Stand-ard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards.They meet the requirements of cat-egory B of the Office Chair Stand-ard DIN EN 1335.

Modus cantilever chairs and four-legged visitor chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.


73

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.

Standard height backrest¡ 42/53 ¶ 91/102 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")

273/7With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium coated 1148 1181 1441

Additional charge/reduced pricesBackrest upholstered on the front 45 61 217Backrest covered on outer side 77 92 245

Frame aluminium polished 45 45 45Frame aluminium bright chrome plated 123 123 123

Height adjustable armrests 110 110 110Transparent material (without additional charge) • • •Height-adjustable lumbar support 61 61 61Anti-static castors 45 45 45


Medium-height backrest¡ 42/53 ¶ 98/109 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 38⅝"/42⅞" ¢ 25¼" | 24")






• available

Modus Compact Task chairs


62 63 66 67 69

74

€ € €

74

All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in combination with back cushion.

High backrest¡ 42/53 ¶ 106/117 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")






Counter chair¡ 62/75 ¶ 111/124 ¢ 64 | 61 (¡ 24⅜"/29½" ¶ 43¾"/48⅞" ¢ 25¼" | 24")

273/1With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable)Frame aluminium coated 1318 1351 1611



Transparent material (without additional charge) • • •


• available

Modus Compact Task chairs Counter chairs


62 63 66 67 69

74

€ € €

75

All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in combination with back cushion.

Standard height backrest¡ 46 ¶ 95 ¢ 64 | 61 (¡ 18⅛" ¶ 37⅜" ¢ 25¼" | 24")

271/7Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension controlFrame aluminium coated 1058 1091 1351





Medium-height backrest¡ 46 ¶ 102 ¢ 64 | 61 (¡ 18⅛" ¶ 40⅛" ¢ 25¼" | 24")

272/7Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension controlFrame aluminium coated 1105 1138 1398

Additional chargesBackrest upholstered on the front 77 92 263Backrest covered on outer side 77 92 245



Standard height backrest¡ 43 ¶ 88 ¢ 57 | 56 (¡ 16⅞" ¶ 34⅝" ¢ 22½" | 22")

276/7Backrest with non-transparent stretch materialFrame aluminium coated 785 818 1078


Frame aluminium clear anodized 45 45 45Frame aluminium bright chrome plated 138 138 138

Transparent material 33 33 33

• available

Modus Compact Conference/visitor chairs


62 63 66 67 69

74

€ € €

76

All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion.

Standard height backrest¡ 43 ¶ 85 ¢ 57 | 56 (¡ 16⅞" ¶ 33½" ¢ 22½" | 22")

277/7Backrest with non-transparent material, Polypropylene armrestsFrame coated 677 710 970



Armrests with embossed leather pad (cannot be offered on stackable version) 172 172 172Wooden armrests 95 95 95Transparent material 33 33 33Stackable version (in combination with frame bright chrome plated only, stackable 5-high free-standing) 74 74 74

Medium-height backrest¡ 43 ¶ 92 ¢ 57 | 56 (¡ 16⅞" ¶ 36¼" ¢ 22½" | 22")

279/7Backrest with non-transparent material, Polypropylene armrestsFrame coated 724 757 1017



Armrests with embossed leather pad (cannot be offered on stackable version) 172 172 172Wooden armrests 95 95 95Transparent material 33 33 33Stackable version (in combination with frame bright chrome plated only, stackable 5-high free-standing) 74 74 74

Modus Compact Cantilever chairs


62 63 66 67 69

74

€ € €

77

Four-wheeled trolley 277for 6 stackable cantilever chairs 559

Modus Compact Accessories

€

78

Frame versions Task chair and visitor chair Star base, swing plates

51 Bright chrome plated52 Aluminium polished53 Coated black60 Coated, silver satin finish

Cantilever chair Round steel tube frame



41 Black

28 rangeModus MediumDesign: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg

Technical details

FunctionTask chairs with backrest with stretch material and automatic syn-chro-adjustment: the seat / back-rest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infi-nitely variable tension adjustment for the user. Forward position lock-able by engaging lever. Gas lift, conforming to DIN 4550, for infi-nitely variable adjustment of seat height.Swivel-mounted conference / visitor chairs with automatic synchro ad-justment and infinitely variable height adjustment, optionally with rigid, four-arm seat bearer; alterna-tively also as a cantilever version.

Frame

Task chairsDie-cast aluminium star base, coated, polished or bright chrome plated.Conference/visitor chairs with four-star base in die-cast alumini-um, coated, polished or bright chrome plated.Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpet-ed floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, coated to match the star base, polished or bright chrome plated. Synchro-mecha-nism case in sheet steel, coated black.

Conference chairs / visitor chairsModel 281/5 with four-arm seat bearer in die-cast aluminium, coated in the same colour, polished or bright chrome plated to match star base.

Cantilever chairsSteel tube frame, bright chrome plated, matt chrome plated or coat-ed, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with addi-tional felt insert.

SeatSeat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover.

Backrests

Task and conference chairsFrame in black, glass fibre-rein-forced polyamide. Exchangeable frame covering in black polyamide material, non-transparent or trans-parent, non-transparent version with underpadding. Non-trans-parent material optionally addition-ally covered on the front and with cut foam underlay.Standard backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover.High backrest with a shoulder support with a forward curvature, covered in embossed leather for fabric cover; in the same colour leather for leather cover. Task chairs optionally available with height-ad-justable lumbar support.

Cantilever chairsSteel tube frame, bright chrome plated, matt chrome plated or colour coated.Exchangeable frame covering in black polyamide material, non-transparent or transparent. Non-transparent material optionally covered on the front and with cut foam underlay.Crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover.

Armrests

Task and visitor chairsArmrests in black, textured, glass fibre-reinforced polyamide.On request, with black, embossed leather pad for fabric cover; in the same colour leather for leather cover.On request, with armrests in die-cast aluminium, aluminium polished or bright chrome plated with black leather pad for fabric cover; in the same colour leather for leather cover.

Cantilever chairsArmrest pads in laminated beech, natural finish, optionally in poly-propy lene with black, embossed leather pad for fabric cover; in the same colour leather for leather cover.

StandardsModus Medium task chairs and conference chairs / visitor chairs conform to the Office Chair Stand-ard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards.They meet the requirements of category C of the Office Chair Standard DIN EN 1335.

Modus cantilever chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.


79

All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.

Standard height backrest¡ 42/53 ¶ 91/102 ¢ 68 | 63 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 24¾")

283/7With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustmentFrame aluminium coated 1656 1688 1970



Transparent material 32 32 32Armrests with embossed leather pad 156 156 156Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 256 256 256Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 340 340 340Lumbar support for task chairs 61 61 61Anti-static castors 45 45 45

High backrest¡ 42/53 ¶ 112/123 ¢ 68 | 63 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 24¾")

284/7With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustmentFrame aluminium coated 1983 2015 2297



Transparent material 32 32 32Armrests with embossed leather pad 156 156 156Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 256 256 256Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 340 340 340Lumbar support for task chairs 61 61 61Anti-static castors 45 45 45

Modus Medium Task chairs


62 63 66 67 69

74

€ € €

80

All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion.

Standard height backrest¡ 45 ¶ 94 ¢ 61 | 59 (¡ 17¾" ¶ 37" ¢ 24" | 23¼")

281/5Swivel-mounted, with rigid seat bearer, With seat cushion, Backrest with non-transparent material, Armrests polyamideFrame aluminium coated 1139 1171 1453



Transparent material 32 32 32Armrests with embossed leather pad 156 156 156Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 256 256 256Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 340 340 340

Standard height backrest¡ 45/56 ¶ 94/105 ¢ 61 | 59 (¡ 17¾"/22" ¶ 37"/41⅜" ¢ 24" | 23¼")

281/6Swivel-mounted, with seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustmentFrame aluminium coated 1571 1603 1885



Transparent material 32 32 32Armrests with embossed leather pad 156 156 156Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 256 256 256Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 340 340 340

Modus Medium Conference/visitor chairs


62 63 66 67 69

74

€ € €

81


Standard height backrest¡ 43 ¶ 91 ¢ 65 | 56 (¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 22")

287/7With seat cushion, Backrest with non-transparent material, Armrests laminated beechFrame coated 910 942 1224



Armrests with embossed leather pad 108 108 108Transparent material 32 32 32

Modus Medium Cantilever chairs


62 63 66 67 69

74

€ € €

82

Frame versions Task chair and visitor chair Star base, swing plates

51 Bright chrome plated52 Aluminium polished

Cantilever chair Round steel tube frame

51 Bright chrome plated58 Matt chrome plated


41 Black

28 rangeModus ExecutiveDesign: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg

Technical details

FunctionTask chairs with luxurious backrest cushion and automatic synchro- adjustment: the seat / backrest an-gle adjusts automatically to the sit-ting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely varia-ble tension adjustment for the user. Forward position lockable by en-gaging lever. Gas lift, conforming to DIN 4550, for infinitely variable ad-justment of seat height.

Swivel-mounted conference / visitor chairs with automatic synchro-adjustment and infinitely variable height adjustment, option-ally with rigid, four-arm seat bearer; alternatively also as a cantilever version.

Frame

Task chairsDie-cast aluminium five-star base, coated, polished or bright chrome plated.Conference / visitor chairs with four-star base in die-cast aluminium, coated, polished or bright chrome plated.Twin wheel swivel castors in black polyamide with load-dependent braking, compliant with DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft cover for hard floors. Anti-static castors on request.Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, polished or bright chrome plated to match the star base. Sheet steel, black-coated synchro technology shell.Conference and visitor chair model 281/91 with four-arm seat bearer in die-cast aluminium, polished or bright chrome plated to match four-star base.

Cantilever chairsFrame in round steel tube, bright chrome plated or matt chrome plated, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert.

SeatSeat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing in embossed leather in the same colour for leather cover.

Backrests

Task chairs and visitor chairsFrame in black, glass fibre-rein-forced polyamide. Exchangeable frame covering in black polyamide material, with slim leather-covered cushion on seat and backrest.On request, outer side of backrest frame with cover.Standard height backrest with a straight edge. High backrest with shoulder support with a forward curvature, with slim, leather-cov-ered cushion.

Cantilever chairsSteel tube frame, bright chrome plated or matt chrome plated to match frame. Exchangeable frame covering in black polyamide materi-al, with slim leather-covered cush-ion on seat and backrest.On request, outer side of backrest frame with leather cover.Backrest with a straight edge.

Armrests

Task chairsArmrests in black, textured, glass fibre-reinforced polyamide, with additional embossed leather pad in the same colour leather.Optionally, with armrests in die-cast aluminium, aluminium pol-ished or bright chrome plated with leather pad and triple-sewn seam in the same colour leather.

Conference / visitor chairsArmrests in die-cast aluminium, aluminium polished or bright chrome plated, with leather pad and triple-sewn seam in the same colour leather.

Cantilever chairsArmrest pads covered in the same colour leather.

StandardsModus Executive task chairs and conference chairs / visitor chairs conform to the Office Chair Stand-ard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards.They meet the requirements of cat-egory C of the Office Chair Stand-ard DIN EN 1335.

Modus Executive cantilever chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.

Please note:The prices for types with cushion-ing leather provided by the custom-er are given on request.

83


Standard height backrest¡ 42/53 ¶ 91/102 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 25⅝")

283/81Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium polished 2876 3048

Additional chargeBackrest covered on outer side 237 303

Frame aluminium bright chrome plated 76 76

Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 64 64Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 158 158Anti-static castors 45 45

High backrest¡ 42/53 ¶ 112/123 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")

284/81Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension controlFrame aluminium polished 3582 3799

Additional chargeBackrest covered on outer side 237 303

Frame aluminium bright chrome plated 76 76

Armrests aluminium polished with leather pad (in combination with frame aluminium polished) 64 64Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) 158 158Anti-static castors 45 45

Modus Executive Task chairs


€ €

84

All conference and visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).

Standard height backrest¡ 45 ¶ 95 ¢ 61 | 59 (¡ 17¾" ¶ 37⅜" ¢ 24" | 23¼")

281/91Swivel-mounted, with rigid seat bearer, Seat and backrest with slim, leather-covered cushionArmrests aluminium polished with leather pad, Frame aluminium polished 2499 2672

Additional chargesBackrest covered on outer side 237 303

Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated 258 258

Standard height backrest¡ 45/56 ¶ 95/106 ¢ 61 | 59 (¡ 17¾"/22" ¶ 37⅜"/41¾" ¢ 24" | 23¼")

281/93Swivel-mounted, Seat and backrest with slim, leather-covered cushion, Automatic synchro-adjustment, tension control, Infinitely variable height adjustmentArmrests aluminium polished with leather pad, Frame aluminium polished 2936 3109


Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated 172 172

Modus Executive Conference/visitor chairs


€ €

85


Standard height backrest¡ 43 ¶ 91 ¢ 65 | 61 (¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 24")

287/81Seat and backrest with slim, leather-covered cushion, Armrests leather-coveredFrame bright chrome plated 2274 2446


Frame matt chrome plated 89 89

Modus Executive Cantilever chairs


€ €

86

Frame versions Star base, V-shaped support, armrests Protective tube, lever for gas lift60 Coated, silver satin finish Coated, silver satin finish72 Aluminium high-lustre polished Bright chrome plated80 Black matt coating Black matt coating

290 rangeSolaDesign: Justus Kolberg Licensor for products and sales: Davis Furniture, NC, US

Technical details

Function The conference chair fuses innova-tive comfort with crisp design and a top quality appeal. The chair’s aes-thetic is defined by the linear shape of the seat shell and the linear alu-minium frame which branches out from the centre column into a V-shaped support that culminates in the armrests. The slender seat shell is swivel-mounted at the front and connect-ed with a V-shaped support by two pressure springs at the back. As a result, the chair rocks back and for-ward comfortably without any ex-tra mechanical parts required. The sprung pressure can easily be ad-justed to suit personal levels of comfort and body weight. DIN 1335-1 compliant gas lift for preci-sion adjustment of the seating height.

Traditional conference and meet-ing rooms, for managerial offices and executive boardrooms, high-quality restaurants or prestigious dining areas.

FrameDie-cast aluminium five-star base, high-lustre polished and coated matt black or silver satin finish. Round, black, polyamide multipur-pose glides for all types of flooring. For wooden floorings (e.g. parquet) please order with extra felt insert.Optionally with castors. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN 12529 as the standard version for carpets; with grey soft polyurethane tyre for hard floors. These castors change the seating height or adjustment range to 45 – 51 cm. The gas lift is covered by bright chrome-plated protective tube, coated matt black or in a silver satin finish. When the star base is alu-minium high-lustre polished, the protective tube is bright chrome plated.V-shaped die-cast aluminium sup-port, high-lustre polished like the star base, coated matt black or in silver satin finish. Lever for adjust-ing the seating height, coated matt black or in silver satin finish. When the star base is aluminium high-lus-tre polished, the lever is bright chrome plated.

Seat and backUnitary seat and backrest shell made of moulded plywood and covered on the rear. Liner made of padded cut foam. Management grade upholstery also with facing all the way round and with quilted stitching.

ArmrestsDie-cast aluminium armrests the same as the frame, optionally with additional plastic armrest pad. Chairs with management grade up-holstery also come with optional leather-covered armrest pads which are only available in the same colour and in combination with leather type 74 or 87.

StandardsThe Sola conference chair complies with DIN EN 16139-L1 and ANSI BIF-MA X 5.1.

87

Medium-height backrest¡ 44/53 ¶ 101/110 ¢ 67 | 68 (¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")

291/7One-piece seat and back shell, fully upholstered, With armrests, Infinitely variable height adjustmentFrame aluminium coated 1355 1355 1653

Additional chargesPlastic armrest pad 44 44 44

Frame aluminium high-lustre polished 44 44 44Castors (45 – 51 cm seating height) 40 40 40

Medium-height backrest¡ 44/53 ¶ 101/110 ¢ 67 | 68 (¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")

291/71Seat and back with management grade upholstery, With armrests, Infinitely variable height adjustmentFrame aluminium coated 1454 1786 2149

Additional chargesPlastic armrest pad 44 44 44Leather-covered armrest pad 120 120

Frame aluminium high-lustre polished 44 44 44Castors (45 – 51 cm seating height) 40 40 40

Sola Conference chair

Upholstery material60626769

6366

74 87

€ € € €

88

Frame versions 5-star base Gas lift (Models 301/7 and 302/7)

49 Coated signal white Bright chrome plated51 bright chrome plated

aluminiumBright chrome plated

53 Coated black Coated black79 Matt polished aluminium Bright chrome plated

Small components Castors Base glide

49 black plastic shell with chrome plated ring

colour matched black or white coated


Bright chrome plated


colour matched black or white coated

79 black plastic shell with matt chrome plated ring

Matt chrome plated

30 rangeGraphDesign: jehs + laub

Technical details

Function Distinctive, high-end, standalone conference chair in two backrest heights. Armrests stylishly link the seat and backrest. Exceptional, sprung (and at the sides also elastic) seating comfort due to three-point support with rear spring strut and sophisticated upholstery tech-nique. Can be used in traditional conference and meeting rooms, ex-ecutive offices and boardrooms, high-quality restaurants or prestig-ious dining areas.

Frame Models 301/5/302/5: Die-cast aluminium four-star base coated in black or signal white, matt polished or bright chrome plated. Black, multipurpose glides made of plastic for all types of flooring. Optionally with base glides with larger contact area for sensitive floorings, either to match the star base black or signal white coated, matt chrome-plated (pol-ished star base) or bright chrome plated (bright chrome-plated star base). Black polyamide glides for carpets. For hard floors (e.g. stone), please order with soft TPU, for wooden floors (e.g. parquet) with additional felt. These glides change the seating height to 44 cm (17⅜").Optionally with castors for four-star bases compliant with DIN EN 1335 and ANSI BIFMA X 5.1 for confer-ence chairs. Twin wheel swivel cas-tors with load-dependent braking made of black polyamide compli-ant with DIN EN 12529, with black polyurethane tyre for both hard and soft floors: black plastic casing for the castors with chrome-plated ring (coated star base), matt chrome-plated ring (matt polished star base) or chrome-plated ring (bright chrome-plated star base). These castors change the seating height to 45 cm (17¾").Swivel-mounted column with Y-shaped seat bearer made of die-cast aluminium, coated in black or signal white, matt polished or bright chrome plated to match the star base.Permanently elastic, rubber/metal connecting elements. Sprung elas-tic strut made of top-quality spring steel in black.

Models 301/6, 302/6, 301/7, 302/7: Die-cast aluminium five-star base coated in black or signal white, matt polished or bright chrome plated, with castors for five-star bases compliant with DIN EN 1335 and ANSI BIFMA X 5.1 standards for conference chairs. Twin wheel swiv-el castors with load-dependent braking made of black polyamide compliant with DIN EN 12529, with black polyurethane tyre for both hard and soft floors: black plastic casing for the castors with chrome-plated ring (coated star base), matt chrome-plated ring (matt polished star base) or chrome-plated ring (bright chrome-plated star base).All models with Y-shaped seat bearers made of die-cast alumini-um, coated in black or signal white, matt polished or bright chrome plated to match the star base. Per-manently elastic, rubber/metal con-necting elements. Sprung elastic strut made of top-quality spring steel in black. Models 301/6 and 302/6 with swiv-el-mounted columns.Models 301/7 and 302/7 with pre-cision-adjustable seating height via a gas lift.

Seat and back Seat and back frame made of met-al, with wave springs, additional cushioning and fully padded with polyurethane.

ArmrestsArmrests that connect the seat and back made of die-cast aluminium and to match the frame black or signal white coated, matt polished or bright chrome plated.

StandardsThe Graph chairs comply with the DIN EN 16139, DIN EN 1728 and ANSI/BIFMA X 5.1 standards.

Please noteThe prices for types with cushion-ing that includes fabrics and leather provided by the customer are given on request.

89

Medium-height backrest¡ 43 ¶ 102 ¢ 62 | 64 (¡ 16⅞" ¶ 40⅛" ¢ 24⅜" | 25¼")

301/5Swivel-mounted, one-piece seat and back frame, fully upholstered, with armrestsFrame aluminium coated 1887 2241 2551

Additional chargesSwivel-return mechanism 109 109 109Matt polished aluminium frame 99 99 99Frame aluminium bright chrome plated 436 436 436Base glides (44 cm seating height) 48 48 48Castors (45 cm) seating height 76 76 76

High backrest¡ 43 ¶ 125 ¢ 62 | 64 (¡ 16⅞" ¶ 49¼" ¢ 24⅜" | 25¼")

302/5Swivel-mounted, one-piece seat and back frame, fully upholstered, with armrestsFrame aluminium coated 2232 2700 3067

Additional chargesSwivel-return mechanism 109 109 109Matt polished aluminium frame 99 99 99Frame aluminium bright chrome plated 436 436 436Base glides (44 cm seating height) 48 48 48Castors (45 cm) seating height 76 76 76

Graph Conference chair


74 87

€ € €

90

Medium-height backrest¡ 45 ¶ 104 ¢ 62 | 64 (¡ 17¾" ¶ 41" ¢ 24⅜" | 25¼")

301/6One-piece seat and back frame, fully upholstered, with armrestsFrame aluminium coated 1982 2336 2646

Additional chargesMatt polished aluminium frame 99 99 99Frame aluminium bright chrome plated 436 436 436

High backrest¡ 45 ¶ 127 ¢ 62 | 64 (¡ 17¾" ¶ 50" ¢ 24⅜" | 25¼")

302/6One-piece seat and back frame, fully upholstered, with armrestsFrame aluminium coated 2327 2795 3162




74 87

€ € €

91

Medium-height backrest¡ 41/51 ¶ 100/110 ¢ 62 | 64 (¡ 16⅛"/20⅛" ¶ 39⅜"/43¼" ¢ 24⅜" | 25¼")

301/7One-piece seat and back frame, fully upholstered, With armrests, Infinitely variable height adjustmentFrame aluminium coated 2001 2355 2665


High backrest¡ 41/51 ¶ 123/133 ¢ 62 | 64 (¡ 16⅛"/20⅛" ¶ 48⅜"/52⅜" ¢ 24⅜" | 25¼")

302/7One-piece seat and back frame, fully upholstered, With armrests, Infinitely variable height adjustmentFrame aluminium coated 2346 2814 3181




74 87

€ € €

92

Edge profilessymmetrically curved (table top group 2 and 6)

Frame versions Legs, crossbeams, underframes Table top bearers

49 Coated signal white Coated signal white51 bright chrome plated aluminium Coated black53 Coated black Coated black76 Chrome, matt-polished Coated black

300 rangeGraphDesign: jehs + laub

Technical details

FunctionA high-quality table system for tra-ditional conference and executive workspaces.

FrameTable legs are made of bright chrome-plated aluminium, matt polished chrome, or coated in black, or signal white. Table cross-beams/underframes are made of aluminium extruded profile, colour matched with the table legs (except for model 300/50, rein-forcement underframes on the in-side are always black). Table top bearers to connect the table top area made of black-coated steel, except when the frame is coated white, the table top bearer is coat-ed white. Adjustable table glides (10 mm) are made of steel, the glide cover is made of die-cast zinc, sur-face the same as the frame, with glide insert made of polyamide for soft floorings and polyurethane for hard floorings or with felt insert.

Table topsMedium density fibreboard (MDF).

Table top group 2 – veneerTable top thickness 26 mm (1")Variation 1:Veneers made of beech, oak or ash based on the Wilkhahn woodstain colour samples with colour matched and symmetrically curved table edge, protected with colourless natural wood varnish.Variation 2:veneers made of maple, walnut or elm as well as Wilkhahn Mocca ve-neer with colour-matched and sym-metrically curved table edge, pro-tected with colourless natural wood varnish.

Table top group 6 - varnished Table top thickness 25 mm (1")Varnished in white or black with colour matched and symmetrically curved table edge.

Accessories

Cable channelCable channel made of aluminium extruded profile, retractable, coat-ed black.

Single table portal opening lengthways and crosswaysPortal opening lengthways, bev-elled on both of the long sides (can be used on both sides), gas-lift damped automatic opening mech-anism, portal on both sides in the same colour and material as the table. Single table portal: 300 x 165 mm (11¾” x 6½")

Portal opening sideways, bevelled on one long side (can be used from one side), gas-lift damped auto-matic opening mechanism, portal on both sides in the same colour and material as the surface of the table. Single table portal: 300 x 165 mm (11¾” x 6½")

Single table portal basic:Aluminium installation frame with portal and brushed profile. Single table portal: 300 x 120 mm (11¾” x 4¾")

Vertical cable managementFlexible black cable sheath. Length including table attachment and floor panel approx. 75 cm.

StandardsThe Graph tables comply with the DIN EN 527 and the ANSI / BIFMA X 5.5 standards.

93

300/00120 x 200, H 73 (47¼" x 78¾", H 28¾") for 6 personsFrame coated 3763 3902 3998Frame aluminium bright chrome plated 4809 4948 5044Frame with chrome matt-polished finish 5124 5263 5359

Additional chargesCable channel 427 427 427300/01 1 single table portal opening lengthways 1091 1152 1244300/05 1 single table portal basic 128 128 128Socket strip, strain anchor, vertical cable management, see accessories on page 104

300/00120 x 240, H 73 (47¼" x 94½", H 28¾") for 6 personsFrame coated 3882 4035 4152Frame aluminium bright chrome plated 4964 5117 5234Frame with chrome matt-polished finish 5317 5470 5587


300/00130 x 280, H 73 (51⅛" x 110¼", H 28¾") for 8 personsFrame coated 4259 4428 4576Frame aluminium bright chrome plated 5449 5618 5766Frame with chrome matt-polished finish 5887 6056 6204

Additional chargesCable channel 509 509 509300/01 2 single table portals opening lengthways 2182 2304 2488300/05 2 single table portals basic 256 256 256Socket strip, strain anchor, vertical cable management, see accessories on page 104

Graph Tables

Table top group6 2 2

varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

94

300/25230 x 540, H 73 (90½" x 212⅝", H 28¾") for 16 persons, consisting of 4 segmentsFrame coated 12487 12944 13482Frame aluminium bright chrome plated 15121 15578 16116Frame with chrome matt-polished finish 16144 16601 17139

Additional chargesCable channel 3695 3695 3695300/02 8 singletable portals opening sideways 8888 9368 10120300/05 8 single table portals basic 1024 1024 1024Socket strip, strain anchor, vertical cable management, see accessories on page 104

Graph Table configurations


varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

95

300/26230 x 620, H 73 (90½" x 244⅛", H 28¾") for 18 persons, consisting of 6 segmentsFrame coated 15806 16442 16955Frame aluminium bright chrome plated 18741 19377 19890Frame with chrome matt-polished finish 19910 20546 21059




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

96

300/27230 x 700, H 73 (90½" x 275⅝", H 28¾") for 20 persons, consisting of 6 segmentsFrame coated 16753 17429 18019Frame aluminium bright chrome plated 19811 20487 21077Frame with chrome matt-polished finish 21296 21972 22562




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

97

t

300/28230 x 780, H 73 (90½" x 307⅛", H 28¾") for 22 persons, consisting of 6 segmentsFrame coated 17578 18308 19020Frame aluminium bright chrome plated 20844 21574 22286Frame with chrome matt-polished finish 22548 23278 23990




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

98

300/30Ø 125, H 73 (Ø 49¼", H 28¾") for 4 personsFrame coated 3217 3365 3428Frame aluminium bright chrome plated 4185 4333 4396Frame with chrome matt-polished finish 4439 4587 4650

300/30Ø 150, H 73 (Ø 59", H 28¾") for 4 personsFrame coated 3480 3659 3751Frame aluminium bright chrome plated 4495 4674 4766Frame with chrome matt-polished finish 4800 4979 5071

300/40Ø 210, H 73 (Ø 82⅝", H 28¾") for 8 persons, consisting of 2 segmentsFrame coated 5242 5459 5617Frame aluminium bright chrome plated 6335 6552 6710Frame with chrome matt-polished finish 6599 6816 6974


Graph Tables


varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

99

300/50Ø 300, H 73 (Ø 118⅛", H 28¾") for 12 persons, consisting of 4 segmentsFrame coated 8702 9082 9436Frame aluminium bright chrome plated 9982 10362 10716Frame with chrome matt-polished finish 10453 10833 11187


Graph Tables


varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

100

300/30120 x 120, H 73 (47¼" x 47¼", H 28¾") for 4 personsFrame coated 3361 3476 3536Frame aluminium bright chrome plated 4359 4474 4534Frame with chrome matt-polished finish 4641 4756 4816

300/40190 x 190, H 73 (47¾" x 47¾", H 28¾") for 8 persons, consisting of 2 segmentsFrame coated 5188 5392 5552Frame aluminium bright chrome plated 6295 6499 6659Frame with chrome matt-polished finish 6663 6867 7027


300/50280 x 280, H 73 (110¼" x 110¼", H 28¾") for 12 persons, consisting of 4 segmentsFrame coated 9049 9333 9674Frame aluminium bright chrome plated 10442 10726 11067Frame with chrome matt-polished finish 11059 11343 11684


Graph Tables


varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

101

300/14Starting element150 x 190, H 73 (59" x 74¾", H 28¾")Frame coated 4091 4223 4349Frame aluminium bright chrome plated 5165 5297 5423Frame with chrome matt-polished finish 5546 5678 5804


300/14Starting element150 x 270, H 73 (59" x 106¼", H 28¾")Frame coated 4686 4862 5039Frame aluminium bright chrome plated 5901 6077 6254Frame with chrome matt-polished finish 6390 6566 6743




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

102

300/16Intermediate element150 x 160, H 73 (59" x 63", H 28¾")Frame coated 3274 3406 3532Frame aluminium bright chrome plated 3989 4121 4247Frame with chrome matt-polished finish 4244 4376 4502


300/16Intermediate element150 x 240, H 73 (59" x 94½", H 28¾")Frame coated 3869 4045 4222Frame aluminium bright chrome plated 4726 4902 5079Frame with chrome matt-polished finish 5088 5264 5441




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

103

300/15Finishing element150 x 190, H 73 (59" x 74¾", H 28¾")Frame coated 2728 2860 2986Frame aluminium bright chrome plated 3443 3575 3701Frame with chrome matt-polished finish 3698 3830 3956


300/15Finishing element150 x 270, H 73 (59" x 106¼", H 28¾")Frame coated 3323 3499 3676Frame aluminium bright chrome plated 4180 4356 4533Frame with chrome matt-polished finish 4542 4718 4895




varn

ished

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

104

Socket strips 300/03with insertion platesand strain anchor*, with 4 modules, 3 x power supply modules, 1 x data module 297

When ordering state local standard* incl. fastening material

Socket strips 300/04with insertion plates and strain anchor*, with 4 modules, 2 x power supply modules, 1 x data module,1 x HDMI connector 625

When ordering state local standard* incl. fastening material

Vertical cable management 300/051 160

Strain anchor for cable channel 300/06with insertion plate* (2 items) 43

* incl. fastening material

Graph Accessories

€

106

Seat and back shellRAL 9011

Graphite blackRAL 7023

Cement greyRAL 9002

Grey-whitePolyamide Black

Grey

White

Frame colour

Seat and back shellRAL 9011

Graphite blackRAL 7023

Cement greyRAL 9002

Grey-whiteRAL 9003

Signal whiteRAL 3000 Flame red

RAL 6008 Brown-green

Textile cover Grey-beige C2 / 20

Grey-black C2 / 21

Black C2 / 22

Red-beige C2 / 23

Olive-beige C2 / 24

Sand C3 / 30

Black-grey C3 / 31

Light grey C3 / 32

Graphite C3 / 33

Ruby red C3 / 34

340 rangeChassisDesign: Stefan Diez

Technical details

FunctionFour-legged, lightweight multi-purpose chair for conference rooms, informal meeting areas, caf-eterias, showrooms, lobbies, hotels or dining rooms.

FrameFrame made of three-dimensional, deep-drawn, extremely strong sheet steel, coated in graphite black, cement grey, grey-white, sig-nal white, flame red, brown-green. Black, multi-purpose glides made of plastic for all types of flooring.

Model 341/7 (outdoor design) with extra coating to protect from corro-sion. Only in conjunction with a black coated frame and black seat shell.

Seat and backUnitary seat and backrest shell made of finely grained plastic (model 341/1), or with textile cover (model 341/5), or fully upholstered with cut foam, leather covered, shell covered with leather at the rear (model 341/6).

StandardsThe Chassis multi-purpose chairs comply with the DIN EN 13761 standard.

Only the combinations listed in the following matrix are possible.

107

Multi-purpose chair¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")

341/1Stackable 4-high free-standingFrame coated 284


341/5with textile cover Not stackableFrame coated 398 406


341/6leather-covered fully upholstered, Not stackableFrame coated 571

Outdoor multi-purpose chair¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")

341/7Stackable 4-high free-standingFrame coated 341

Chassis Multi-purpose chair

Upholstery material

C2 C3 74

€ € € €

108

Frame versions Frame


361 rangeCenoDesign: Läufer + Keichel

Technical details

FunctionFour-leg, stackable conference chair for conference rooms, as well as high-quality restaurant and can-teen spaces.

FrameFrame in solid aluminium, bright chrome plated or coated in silver satin finish or black. Black, multi-purpose glides made of plastic for all types of flooring, optionally with extra felt glides.

Seat and backSeat frame in die-cast aluminium, bright chrome plated or coated in silver satin finish or black. Elastic backrest shell in polypropylene, re-inforced with two hexagonal rods connecting the seat and back. Backrest shell fully padded with polyurethane. Seat cushion made of polyurethane moulded foam; seat pan in black through-dyed plastic. Back- and seat cushion re-placeable. Two-part, replaceable cover.

ArmrestsArmrests in black polyamide.

StandardsCeno conference chairs: compliant with DIN EN 16139-L1, DIN EN 1022 and ANSI/BIFMA X 5.1 standards.

AccessoriesOptional stainless steel inline con-nector.Optionally model 361, short inline connector for linking chairs without armrests and chairs with armrests alternately with chairs without armrests or model 362 long inline connector for linking chairs with armrests.

109

Black, multi-purpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case).

Medium-height backrest¡ 47 ¶ 80 ¢ 52 | 54 (¡ 18½" ¶ 31½" ¢ 20½" | 21¼")

361/5With seat and back cushion, Stackable 8-high free-standingFrame aluminium coated 490 529 560 720 833

Additional chargeFrame aluminium bright chrome plated 56 56 56 56 56

Medium-height backrest¡ 47 ¶ 80 ¢ 58 | 54 (¡ 18½" ¶ 31½" ¢ 22⅞" | 21¼")

361/6Armrests polyamide With seat and back cushion Stackable 8-high free-standingFrame aluminium coated 602 641 672 832 945


High backrest¡ 47 ¶ 85 ¢ 52 | 54 (¡ 18½" ¶ 33½" ¢ 20½" | 21¼")

362/5With seat and back cushion, Stackable 8-high free-standingFrame aluminium coated 544 583 614 774 887


High backrest¡ 47 ¶ 85 ¢ 58 | 54 (¡ 18½" ¶ 33½" ¢ 22⅞" | 21¼")

362/6Armrests polyamide With seat and back cushion, Stackable 8-high free-standingFrame aluminium coated 656 695 726 886 999


Ceno Conference chairs


63 66 67

74 87

€ € € € €

110

Two-wheeled cart 360for 8 stackable conference chairs 568

Inline connector set short 361for linking chairs without armrests and chairs with armrests alternately with chairs without armrests 37

Inline connector set long 362for linking chairs with armrests 40

Seat numbers 363magnetic seat numbers 1 set (10 consecutive numbers) 25

Ceno Accessories

€

112

440 rangeConfairDesign: wiege, Fritz Frenkler, Justus Kolberg

Technical details

FunctionMobile, modular furniture range for multi-functional communica-tion environments with dynamic, self- organized teamwork.

Mobile desk

FramePolished die-cast aluminium base. Black polyamide castors and glides. Oval aluminium profile column, clear anodized or coated in black or silver satin finish.

Writing tabletBirch plywood, fixed to column with tilt / fold function. Back and front edge of desk top finished with a raised, black polypropylene lipping.

Finishes

Desk top group 1 – laminateTop thickness 11 mm (⅜")Laminate according to Wilkhahn colour and surface finish samples. Edging, natural oiled finish.

Desk top group 2 – veneerTop thickness 11 mm (⅜")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour samples.Variation 2:Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples.

Veneer versionAs a standard, veneers are processed by slip-match method onto the table top.Surfaces sealed with clear lacquer:Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca.Closed-pore: maple and beech veneer.Some specific growth features possible.

AccessoriesFour-wheeled trolley

Server

FrameDie-cast aluminium base, polished or coated in black or silver satin fin-ish, with four twin wheel swivel castors in black polyamide. Alumin-ium profile column and cable man-agement cover, clear anodized or coated in the same colour as the base.Black polypropylene handle.

Top shelf and box bracketsDie-cast aluminium, coated black.

Top shelfOne-piece sheet steel with black textured coating.

BoxBase: one-piece sheet steel with black textured coating.Birch plywood body and front.

Box with drawerBirch plywood body and front.Base: one-piece sheet steel with black textured coating.Solid beech drawer with natural finish, on steel runners.Internal measurements of drawer 37 x 37 cm (145/8" x 145/8").Lid in one-piece sheet steel with black textured coating.

Body group 1 – laminateTop thickness 12 mm (½")Laminate according to Wilkhahn colour and surface finish samples. Lipping, natural oiled finish.

Body group 2 – veneerTop thickness 12 mm (½")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour samples.Variation 2:Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples.

Veneer versionAs a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer:Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca.Closed-pore: maple and beech veneer.Some specific growth features possible.

Please note:Maximum load capacity with even weight distribution: 60 kg in total for server, 20 kg each for top shelves, boxes, and 20 kg for box with drawer – max. 6 kg inside drawer.

113

Lectern

FrameSimilar to server, but with two twin wheel swivel castors and two glides in black polyamide.

Lectern topBirch plywood, front finished with raised, black polypropylene lipping.

Surfaces

Group 1 – laminateTop thickness 11 mm (⅜")Laminate according to Wilkhahn colour and surface finish samples. Lipping, natural oiled finish.

Group 2 – veneerTop thickness 11 mm (⅜")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour samples.Variation 2:Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples.

Veneer versionAs a standard, veneers are slip-matched onto the table top.Surfaces sealed with clear lacquer:Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca.Closed-pore: maple and beech veneer.Some specific growth features possible.

Front panelPerforated steel in black or silver satin finish.Unperforated upper edge for com pany logos max. 115 x 426 mm (4½" x 16¾").

AccessoriesAdditional shelf, width 45 cm (17¾"), depth 35 cm (13¾").

Pinboard / Whiteboard

StandFeet in polished die-cast alumini-um. Glides in black polyamide. Frame optionally with four lockable black castors.

FrameAluminium profile sides and braces, clear anodized or coated in silver satin finish or black.

Board cover pinboardDouble-sided, grey felt covering.With anthracite polyether foam pinstrip.

Board cover whiteboardOne side covered in grey felt, one side in white enamelled sheet steel, suitable for magnets, can be dry wiped and used as a projection screen.

AccessoriesFour-wheeled trolleyWhiteboard starter kit

Flipchart

FrameModel 442/1Foldable, three-legged easel in aluminium profile, bright chrome plated, clear anodized or coated in black or silver satin finish. Hinges and glides in black polyamide. Frame optionally with three castors in black, rear castor lockable (with this version, the frame is not foldable).Writing panel made of MDF (Medi-um-Density Fibreboard) directly coated with melamine resin. Thick-ness 13 mm (½"), surfaced with laminate (colour 24/89), height-ad-justable in three positions; remova-ble. Two pins to hold standard flip-chart paper; with black polyamide paper holder. Aluminium profile pentray, clear anodized or coated in the same colour as the frame.

114

Mobile desk¶ 73 ¢ 48 | 45 (¶ 28¾" ¢ 18⅞" | 17¾")

441/1StackableFoot aluminium polished, column aluminium coated 436 473 520

Additional chargeFoot aluminium polished, Column aluminium clear anodized 13 13 13

Flipchart¶ 180/200 ¢ 75 | 67 (¶ 70⅞"/78¾" ¢ 29½" | 26⅜")

442/1Foldable, Writing surface, height adjustableLegs and pentray aluminium coated 644

Additional chargesLegs and pentray aluminium clear anodized 36Legs aluminium bright chrome plated, Pentray aluminium, clear anodized 98Mobile version on castors (frame not foldable) 209

Pinboard/whiteboard¶ 190 ¢ 125 | 54 (¶ 74¾" ¢ 49¼" | 21¼")

443/1 Pinboard, stackable, Both sides covered in grey felt, With pinstrip model 449Foot sections aluminium polished, Frame aluminium coated 636

Additional chargesFoot sections aluminium polished, Frame aluminium clear anodized 35Version with castors 130

443/3 Whiteboard, stackable, One side covered in grey felt, One side in white enamelled sheet steel, suitable for magnets, For use with dry-wipe markers, Suitable as projection surface, With pinstrip model 449Foot sections aluminium polished, Frame aluminium coated 878

Additional chargesFoot sections aluminium polished, Frame aluminium clear anodized 35Version with castors 130

Pinstrip 449

For pinboard model 443/1 and whiteboard 443/3 17

Starter kit 451For whiteboard model 443/3 comprising: 10 Magnets Ø 30 mm (1⅛") (2 colours), 4 dry-wipe board markers (4 colours), 1 Magnetic pen holder, 1 Magnetic board eraser, 10 Sheets erasing paper, 1 Bottle of board cleaning fluid 98

Confair Mobile desk, Flipchart, Pinboard/whiteboard

Body group/Table top group1 2 2

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € € €

115

Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer.

Lectern¶ 106/115 ¢ 46 | 51 (¶ 41¾"/45¼" ¢ 18⅛" | 20⅛")

448/9With modesty panel, coatedBase and column aluminium coated 1577 1612 1647

Additional chargeBase aluminium polished, column aluminium clear anodized 63 63 63

Shelf 448For lectern model 448/9, width 45 (17¾"), depth 35 (13¾") 287 300 335

Server catering/interactive conference¶ 107 ¢ 46 | 59 (¶ 42⅛" ¢ 18⅛" | 23¼")

446/31 Box with drawer, 2 Open-top boxesBase and column aluminium coated 1835 1940 2078

Additional chargeBase aluminium polished, column aluminium clear anodized 63 63 63

Confair Lectern, Server catering/interactive conference

Body group/Table top group1 2 2

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

116

Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer.

Server frame

445/00Height 96 (37¾") 510Base and column aluminium coated

446/00Height 107 (42⅛")Base and column aluminium coated 559

Additional chargeBase aluminium polished, column aluminium clear anodized 63

Shelf 447/01 23845 x 45 (17¾" x 17¾")

Shelf 447/02 30545 x 91 (17¾" x 35⅞")

Box 447/04 320 355 401Open, 45 x 45 x 10 (17¾" x 17¾" x 3⅞")

Box with drawer 447/07 636 671 71745 x 45 x 11 (17¾" x 17¾" x 4⅜")

Confair System components: servers

Body group1 2 2

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € € €

117

Four-wheeled trolley 441for six mobile desks model 441/1 559

Four-wheeled trolley 443for six pinboards model 443/1 or six whiteboards model 443/3 815

Confair Accessories

€

118

Edge profiles

Standard version: Bullnose double with integral, impact-resilient profile

Alternatively: Straight with integral, impact-resilient profile

Frame versions

Foot section Upright Connecting bar Top bearer and underframe

51 Bright chrome plated Black coated or bright chrome plated Black coated or bright chrome plated Coated black52 Aluminium polished Clear anodized Coated, silver satin finish Clear anodized53 Coated black Coated black Coated black Coated black60 Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish

440 rangeConfair folding tableDesign: Andreas Störiko

Technical details

FunctionMoveable, collapsible and linkable table range for flexible, dynamic use of conference and communica-tion areas. Just one single step is required to open out or collapse up to three metre long, barrel-shaped or rectangular tables. The tables can also be linked to form confer-ence systems using table-table con-nectors. Large-sized wheels allow the tables to be transported in buildings and come complete with a locking brake. As a result, mini-mum cost and effort is required to manage conference spaces. Ideal for multi-purpose conference inte-riors in high quality design. Alterna-tively as a wild card in combination with the Logon table range for con-ference spaces with a variety of partition options, or with Timetable for sophisticated training and semi-nar spaces.

FrameDie-cast aluminium, bright chrome-plated, polished foot section or coated in silver satin finish or black. Aluminium profile uprights and un-derframe, clear anodised or coated in the same colours as the foot sec-tions. The bright chrome-plated foot sections are coated black. Upright optionally available bright chrome plated. Connecting bar und T-shaped joint coated like the up-rights and underframes, with clear anodised uprights and under-frames coated in silver satin finish. Connecting rod and T-shaped joint optionally bright chrome-plated. Lockable, black polyamide castors.

Table top group 1 – laminateThickness 26 mm (1”) Laminate according to Wilkhahn colour and surface finish samples with laminated beech lipping, natural oiled finish.

Table top group 2 – veneerThickness 26 mm (1”)Variation 1:Beech veneer according to Wilkhahn woodstain colour sam-ples with laminated beech lipping or oak, or ash veneer according to Wilkhahn woodstain colour sam-ples with lipping, as far as possible in the same colour as the veneer.Variation 2:Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer.

Veneer typesAs a standard, veneers are slip-matched method onto the table top.The surfaces are sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer. Closed-pore: maple and beech veneer.Some specific growth features possible.

Table top group 3 – linoleumTable top thickness 27 mm (1⅛"). Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish.

Accessories

Single table portalHinged cover in the same colour and material as the table top sur-face with brush strip for cable exit. Aperture with real wood lipping, as far as possible in the same colour as the table top.Hinge allows 180° opening angle. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞").Linoleum on request.

Further surfaces for the formats shown in the price list are available on request.

StandardsThe Confair folding tables comply with ANSI / BIFMA X 5.5.

When placing repeat orders, please indicate whether your table tops have slip -matched or book-matched veneer.

119

Rectangular 440/00With cross veneer, e.g. 110 x 260, H 73 (43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63")Aluminium coated foot sections, uprights and underframes, coated connecting bar 5010 5452 6121 5733

Additional chargesPolished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar 82 • • • •Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar 172 • • • •Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar 384 • • • •Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar 588 • • • •

Table-table-connectors model 613, metal (2 items) 100 • • • •

Depth

Length90

(35⅜")100

(39⅜")105

(41⅜")110

(43¼")120

(47¼") 180 (70⅞") 4594 4665 4712 4792 4928 200 (78¾") 4645 4716 4795 4845 5006 210 (82⅝") 4670 4764 4802 4866 5019 220 (86⅝") 4697 4791 4848 4886 5080 240 (94½") 4748 4810 4872 4978 5148 260 (102⅜") 4800 4839 4926 5010 5181 280 (110¼") 4851 4932 5042 5134 – 300 (118⅛") 4903 4964 – – –

180 (70⅞") 4871 4969 5073 5140 5264 200 (78¾") 4948 5057 5143 5204 5371 210 (82⅝") 4987 5107 5159 5232 5401 220 (86⅝") 5026 5138 5216 5259 5470 240 (94½") 5101 5196 5237 5406 5616 260 (102⅜") 5181 5243 5376 5452 5662 280 (110¼") 5256 5380 5555 5644 – 300 (118⅛") 5334 5427 – – –

180 (70⅞") 5321 5427 5573 5661 5779 200 (78¾") 5434 5593 5694 5762 5965 210 (82⅝") 5490 5668 5714 5815 6028 220 (86⅝") 5546 5705 5808 5835 6142 240 (94½") 5661 5795 5860 5978 6302 260 (102⅜") 5773 5863 6005 6121 6377 280 (110¼") 5887 6065 6328 6405 – 300 (118⅛") 5999 6134 – – –

180 (70⅞") 5050 5151 5268 5344 5475 200 (78¾") 5142 5273 5363 5441 5630 210 (82⅝") 5190 5325 5387 5489 5677 220 (86⅝") 5238 5373 5473 5498 5747 240 (94½") 5329 5442 5515 5671 5909 260 (102⅜") 5422 5498 5661 5733 5970 280 (110¼") 5517 5666 5860 5970 – 300 (118⅛") 5610 5722 – – –


Confair Folding tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

120

Barrel shape 440/2With cross veneer, e.g. 90/110 x 260, H 73 (35⅜"/43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63")Aluminium coated foot sections, uprights and underframes, coated connecting bar 5010 5452 6121 5733

Additional chargesPolished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar 82 • • • •Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar 172 • • • •Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar 384 • • • •Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar 588 • • • •

Depth

Length90/110

(35⅜"/43¼")90/120

(35⅜"/47¼") 180 (70⅞") – 4928 240 (94½") – 5148 260 (102⅜") 5010 5181 280 (110¼") – 5209

180 (70⅞") – 5264 240 (94½") – 5616 260 (102⅜") 5452 5662 280 (110¼") – 5707

180 (70⅞") – 5779 240 (94½") – 6302 260 (102⅜") 6121 6377 280 (110¼") – 6451

180 (70⅞") – 5475 240 (94½") – 5909 260 (102⅜") 5733 5970 280 (110¼") – 6032


Confair Folding tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

121

+++UEBERSETZUNG+++ Cable outlet

707/1Black plastic, Ø 80 mm (3⅛")

60


707/2Aluminium coated black, Ø 85 mm (3⅜")

130


707/3Aluminium clear anodized, Ø 85 mm (3⅜")

130

Confair Folding tables Accessories

€

122

Integrated techni-station on both sides 701/60 or 701/70

Storage net

Cable clip for the table legs (2)

Set price integrated techni-station on both sides 701/60 with 3 modules: 715

2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long


2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long


Cable cover for techni-station






All prices include section cut out of tableFurther details from page 246

Additional chargesTechni-station with opening mechanism at the touch of a button 74

Cable harness covered with black fabric sleeving 100



Confair folding table Built-in component sets

For A1 and A3 mounting position Integrated Techni-Station Rotate set consisting of: €

For B1 and B3 mounting position Integrated Techni-Station Rotate set consisting of: €

123

Integrated techni-station Compact 701/95


Set price integrated techni-station Compact 701/95 with 3 modules: 124

1 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port

+++UEBERSETZUNG+++ Cable outlet 707/1 or 707/2 or 707/3


Set price cable outlet 707/1 65Black plastic, Ø 80 mm (3⅛")

Set price cable outlet 707/2 135Aluminium coated black, Ø 85 mm (3⅜")

Set price cable outlet 707/3 135Aluminium clear anodized, Ø 85 mm (3⅜")

All prices include section cut out of tableFurther details from page 246For some cable outlets see accessories page 121

Additional charges


Additional charges



Integrated techni-station compact set consisting of: € Cable outlet set consisting of: €

124

Single table portal Executive or Basic

Cable basket and mount for attaching socket strips


Set price single table portal Executive 150 x 300 mm (59" x 118⅛")

Table top group 1 Laminate 975Table top group 2 Variation 1 and 2 1194Table top group 3 Linoleum 975Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle vertical

Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 369Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle vertical


Cable basket and mount for attaching socket strips



Table top group 1 Laminate 1055Table top group 2 Variation 1 and 2 1276Table top group 3 Linoleum 1055Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle vertical

Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 448Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle vertical

Additional charges


Additional charges



For A1 and A3 mounting position Single table portal set consisting of: €

For M1 and M3 mounting position Single table portal set consisting of: €

125

708/1 Socket strip with 3 modules 453 x power supply modules (state local standard on orders).Please order supply-/connecting cable separately

708/2 Socket strip with 3 modules 2132 x power supply modules (state local standard on orders).Please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")


708/5 Socket strip with 4 modules 5462 x power supply modules (state local standard on orders).Please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")

708/6 Socket strip with 5 modules 3233 x power supply modules (state local standard on orders).Please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")

Additional charges

708/8 Input cable 21Length approx. 300 cm (118⅛")

708/9 Extension lead 13Length approx. 100 cm (39⅜")


Socket strips for Set Single table portal: €

126

440/00

Set Mounting position A 1 A 3 B 1 B 3 M 1 M 3Integrated techni-station on both sides 701/60 | 701/70 • • •1 •1 – –

Single table portal Executive | Basic •2 •2 – – • •

Integrated techni-station Compact 701/95 • • • • • •

Cable outlet set 707/1 | 707/2 | 707/3 • • • • • •

612/00

M1 M3

B1 B3

Set Mounting position B 1 B 3 M 1 M 3Integrated techni-station on both sides 701/60 | 701/70 •3 •3 – –

Single table portal Executive | Basic – – • •

Integrated techni-station Compact 701/95 • • • •

Cable outlet set 707/1 | 707/2 | 707/3 • • • •

1 from 210 cm table width2 from 105 cm table depth3 from 240 cm table width• available – not available

Confair folding table Mounting positions

Integrated techni-station Basic, on both sides or single table portalsIntegrated techni-station Compact, Move or cable outlet

128

16 ,1 x 440/00, 100x3004 x 440/00, 100x240

300

5808 ,1 x 440/2, 90/120x260

12090

260

18 ,6 x 440/00, 90x210

665

177

406

22 ,6 x 440/00, 90x210

660

180

440 rangeConfair folding tableExample configurations

129

28 ,8 x 440/00, 90x210

660

400

24 ,8 x 440/00, 90x210

1018

375

130

Frame versions Table frame and edge profiles


540 rangeContasDesign: wiege, Fritz Frenkler, Anette Ponholzer

Technical details

FunctionLightweight, flexible conference ta-ble system that can be used in mul-ti-purpose conference, seminar and training environments. It consists of individual tables that can be op-tionally stacked and folded. It has connecting leaves with quick and easy tool-free linkage thanks to a patented multiple connector plate, making a variety of configurations possible.

FrameLegs in round steel tubing Ø 38 mm (1½"), bright chrome plated or coat-ed.Adjustable glides (with disc profile on folding-leg table version) in black polyamide for soft floors (standard) and in black polyure-thane for hard floors (please specify when ordering).Optionally, as stackable version (in-tegral separator) with legs that are locked in place using a retaining clamp integrated into the table top. Leg retaining clamp in black poly-amide.Multiple connector plate on tables and connecting leaves in die-cast zinc, bright chrome plated or coat-ed. Multiple connector plate on the connecting leaves fitted with sepa-rator and retention mechanism.Tables fitted with table-to-table connectors.

Core material of table topParticle board with straight, concealed lipping.

Table top group 1 – laminateTable top thickness 34 mm (1⅜")Laminate according to Wilkhahn colour and surface finish samples with beech lipping, natural oiled finish.

Table top group 2 – veneerTable top thickness 34 mm (1⅜")Variation 1: Beech, oak or ash ve-neer according to Wilkhahn wood-stain colour samples with wood lip-ping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.

Veneer typesAs a standard, the veneers are made by slip-match method.Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer.Some specific growth features possible.

Table top group 3 – linoleumTable top thickness 35 mm (1⅜") Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish.


Modesty panelsModesty panels with aluminium frame, coated with a silver satin finish, covered with transparent anthracite fabric. Grips in black polyamide.

StandardsThe Contas tables comply with DIN EN 527.

When placing repeat orders, please indicate whether your tabletops have slip-matched or book-matched veneer.

131

All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for corresponding modesty panels to fit long edges and short edges.

Square 540/1175 x 75, H 73 (29½" x 29½", H 28¾")Frame aluminium coated 1326 1562 1753 1631

Additional chargesFrame aluminium bright chrome plated 379 379 379 379As folding table 183 183 183

Rectangular 540/1575 x 150, H 73 (29½" x 59", H 28¾")Frame aluminium coated 1642 2085 2417 2263


Rectangular 540/1875 x 180, H 73 (29½" x 70⅞", H 28¾")Frame aluminium coated 1895 2354 2732 2576


Rectangular 541/1575 x 150 (29½" x 59")Frame aluminium coated 1290 1733 2065 1911

Additional chargeFrame aluminium bright chrome plated 155 155 155 155

Contas Fixed-leg and folding leg tables, table top depth 75 cm (29½")

Table top group1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € €

Contas Connecting leaf, panel depth 75 cm (29½")


Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € €

132

All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for modesty panels to fit long edges and short edges.

Rectangular 540/2590 x 150, H 73 (35⅜" x 59", H 28¾")Frame aluminium coated 1820 2194 2561 2419


Rectangular 540/2890 x 180, H 73 (35⅜" x 70⅞", H 28¾")Frame aluminium coated 2038 2432 2858 2686


Rectangular 541/2590 x 150 (35⅜" x 59")Frame aluminium coated 1466 1840 2207 2065

Additional chargeFrame aluminium bright chrome plated 155 155 155 155

Contas Connecting leaf, panel depth 90 cm (35⅜")


Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € €

Contas Fixed-leg and folding leg tables, table top depth 90 cm (35⅜")


Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € €

133

Four-wheeled trolley 546/75to take five folding tables 540/15 (table depth 75 cm) 1296

Four-wheeled trolley 546/90to take five folding tables 540/25 (table depth 90 cm) 1296

Modesty panel 549/02Length 65 (25⅝"), H 40 (15¾"), for models 540/11 and short edges of models 540/15 and 540/18 411

Modesty panel 549/03Length 80 (31½"), H 40 (15¾"), for the front edges of the 540/25 and 540/28 models 427

Modesty panel 549/04Length 140 (55⅛"), H 40 (15¾"), for models 540/15 and 540/25 601

Modesty panel 549/05Length 170 (66⅞"), H 40 (15¾"), for models 540/18 and 540/28 617

Modesty panel 549/10Length 148 (58¼"), H 40 (15¾"), for models 541/15 and 541/25 617

Table-table connector 549/2014

Table-connecting leaf connector 549/2117

Contas Accessories

€

134

544 rangeConcentraDesign: wiege

Technical details

FunctionTables to furnish offices and com-munication areas in different ways, as a combination or as stand-alone versions for project work, training and seminars, lounges, bistros, can-teens and recreational areas etc.

FrameLegs made of round steel tubing, 40 mm (15/8“) in diameter, bright chrome plated or coated black, sig-nal white or with a silver satin fin-ish. Multipurpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chrome plated or coated.Attached underframe with under-frame profiles made of tubular steel (35 x 25 mm/1⅜" x 1") and black-coated corner angles made of die-cast zinc.

Core material of table topE1 plywood tabletop.

Table top group 1 – laminate Table top thickness 19 mm (¾")Laminate according to the Wilkhahn colour and surface sam-ples with polypropylene plastic lipping.

Table top group 2 – veneerTable top thickness 19 mm (¾")Variant 1: Beech, oak and ash veneer based on Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variant 2:Maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer with wood lipping, as far as possi-ble in the same colour as the veneer.Closed-pore: maple and beech veneer.Some specific growth features possible.

135

Frame versions Legs and capitals Under frames and corner angles

49 Coated signal white Coated black51 Bright chrome plated Coated black53 Coated black Coated black60 Coated, silver satin finish Coated black

Table top group 5 – direct coatingTable top thickness 19 mm (¾")Melamine resin, directly coated in white or light grey with plastic lip-ping in the same colour as the sur-face made of ABS.

Modesty panels Aluminium frame, black coated and covered with black fabric.

Table-table-connectors (option-al) 2 sheet steel connectors, black coated, 4 star-grip screws.

Accessories

Cable outletAluminium cable outlet 85 mm (3⅜“) in diameter, coated black, or clear anodised (only for table top groups 1 and 2) or in plastic, 80 mm (3⅛“) in diameter, in black (for table top groups 5, 1 and 2). When the tables are ordered drill holes in the table top applied and assembly only in the factory.

Cable track profile Aluminium extruded profile, clear anodised, which is screwed under-neath the table top and serves as a support for the cable track.

Cable trackPolypropylene cable track in black with sections for two different ca-bles.

Vertical cable riserPolyamide links in black, plastic foot section in black with a steel core. Adapter for cable track profile in black plastic. Length 80 cm (31½").

StandardsThe Concentra tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards.

136

Rectangular 544/00e.g. 80 x 160, H 73 (31½" x 63", H 28¾")Frame coated 641 860 1089 1199

Additional chargeFrame bright chrome plated 108 108 108 108

DepthLength 75

(29½")80

(31½")90

(35⅜")100

(39⅜")160 (63")

75 (29½") 569 – – – – 80 (31½") – 578 – – – 90 (35⅜") – – 589 – – 150 (59") 632 • 672 • – 160 (63") • 641 • • 901 180 (70⅞") 672 • 712 • – 200 (78¾") • • • 830 –

75 (29½") 739 – – – – 80 (31½") – 755 – – – 90 (35⅜") – – 783 – – 150 (59") 839 • 912 • – 160 (63") • 860 • • 1245 180 (70⅞") 912 • 989 • – 200 (78¾") • • • 1141 –

75 (29½") 878 – – – – 80 (31½") – 908 – – – 90 (35⅜") – – 942 – – 150 (59") 1056 • 1141 • – 160 (63") • 1089 • • 1515 180 (70⅞") 1141 • 1227 • – 200 (78¾") • • • 1366 –

75 (29½") 955 – – – – 80 (31½") – 993 – – – 90 (35⅜") – – 1027 – – 150 (59") 1165 • 1268 • – 160 (63") • 1199 • • 1686 180 (70⅞") 1268 • 1371 • – 200 (78¾") • • • 1526 –

• available on request – not available

Round Ø 126, H 73 (49⅝", H 28¾")Frame coated 699 905 1145 1274


Concentra Tables

Table top group

5 1 2 2

Bond

ed su

rfac

e

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € € €

137

Table-table connector 544(2 units) 32

Modesty panel 545/01640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") 291

Modesty panel 545/02690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") 293

Modesty panel 545/03790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") 299

Modesty panel 545/04890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") 305

Modesty panel 545/051390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") 369

Modesty panel 545/061490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") 396

Modesty panel 545/071690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") 408

Modesty panel 545/081890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾") 424

Concentra Accessories

€

138


707/1Black plastic, Ø 80 mm (3⅛"), for table top groups 5, 1 and 2

60


707/2Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2

130


707/3Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2 130

Cable management horizontal

547Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 92

Cable management vertical 548Cable riser with adapter to connect with the cable track’s profile, foot sec-tion with steel core 49

Power supply

Concentra Accessories

€

140

600 rangeConversaDesign: wiege

Technical details

FunctionTables for variable furnishing of of-fices and communication areas, as a combination or as stand-alone for project work, training and semi-nars, lounges, bistros, canteens and recreational areas etc.

FrameLegs made of square steel tubing (40 x 40 mm/15/8" x 15/8"), bright chrome plated or coated black, sig-nal white or with a silver satin fin-ish. Multipurpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chrome plated or coated.Underframe attached with screws and with underframe profiles made of tubular steel (35 x 25 mm (1⅜" x 1") and black-coated corner angles made of die-cast zinc.

Core material of table topE1 plywood tabletop.

Table top group 1 – laminate Table top thickness 19 mm (¾")Laminate based on the Wilkhahn colour and surface samples with ABS plastic lipping.

Table top group 2 – veneerTable top thickness 19 mm (¾")Variant 1: Beech, oak and ash veneer based on Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variant 2:Maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer with wood lipping, as far as possi-ble in the same colour as the veneer.Closed-pore: maple and beech veneer.Some specific growth features possible.

141

Frame versions Legs and capitals Under frames and corner angles

49 Coated signal white Coated black51 Bright chrome plated Coated black53 Coated black Coated black60 Coated, silver satin finish Coated black

Table top group 5 – direct coatingTable top thickness 19 mm (¾")Melamine resin, directly coated in white or light grey with plastic lipping in the same col-our as the surface made of ABS.

Modesty panelsAluminium frame, black coated and covered with black fabric.

Table-table-connectors ( optional) 2 sheet steel circlips, black coated, 4 star-grip screws.

Accessories

Cable outletAluminium cable outlet Aluminium cable outlet Aluminium cable out-let, 85 mm (3⅜“) in diameter, coat-ed black, or clear anodised (only for table top groups 1 and 2) or in plas-tic, 80 mm (3⅛“) in diameter, in black (for table top groups 5, 1 and 2). When the tables are ordered drill holes in the table top applied and assembly only in the factory.

Cable track profile Aluminium extruded profile, clear anodised and screwed underneath the table top. Serves as a support for the cable track.

Cable trackPolypropylene cable track in black with sections for two different ca-bles.

Vertical cable riserPolyamide links in black, plastic foot section in black with a steel core. Adapter for cable track profile in black plastic. Length 80 cm (31½").

StandardsThe Conversa tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards.

142

Rectangular 600/00e.g. 80 x 160, H 73 (31½" x 63", H 28¾")Frame coated 641 860 1089 1199


Depth

Length75

(29½")80

(31½")90

(35⅜")100

(39⅜")160 (63")

75 (29½") 569 – – – – 80 (31½") – 578 – – – 90 (35⅜") – – 589 – – 150 (59") 632 • 672 • – 160 (63") • 641 • • 901 180 (70⅞") 672 • 712 • – 200 (78¾") • • • 830 –

75 (29½") 739 – – – – 80 (31½") – 755 – – – 90 (35⅜") – – 783 – – 150 (59") 839 • 912 • – 160 (63") • 860 • • 1245 180 (70⅞") 912 • 989 • – 200 (78¾") • • • 1141 –

75 (29½") 878 – – – – 80 (31½") – 908 – – – 90 (35⅜") – – 942 – – 150 (59") 1056 • 1141 • – 160 (63") • 1089 • • 1515 180 (70⅞") 1141 • 1227 • – 200 (78¾") • • • 1366 –

75 (29½") 955 – – – – 80 (31½") – 993 – – – 90 (35⅜") – – 1027 – – 150 (59") 1165 • 1268 • – 160 (63") • 1199 • • 1686 180 (70⅞") 1268 • 1371 • – 200 (78¾") • • • 1526 –

• available on request – not available

Conversa Tables

Table top group

5 1 2 2

Bond

ed su

rfac

e

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € € €

143

Table-table connector 600(2 units) 32

Modesty panel 601/01640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") 291

Modesty panel 601/02690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") 293

Modesty panel 601/03790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") 299

Modesty panel 601/04890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") 305

Modesty panel 601/051390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") 369

Modesty panel 601/061490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") 396

Modesty panel 601/071690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") 408

Modesty panel 601/081890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾") 424

Conversa Accessories

€

144


707/1Black plastic, Ø 80 mm (3⅛"), for table top groups 5, 1 and 2

60


707/2Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2

130


707/3Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2

130

Cable management horizontal

602Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 92

Cable management vertical 603Cable riser with adapter to connect with the cable track’s profile, foot section with steel core 49

Power supply

Conversa Accessories

€

146

610 rangeTimetableDesign: Andreas Störiko

Technical details

FunctionA mobile table range with flip-top table tops and feet that turn in at the same time (not in Timetable Smart and Timetable Shift models). Destined for a variety of uses in multipurpose spaces and for inter-active and dynamic conference types. Ideal when combined with the Confair and Logon table ranges for multifunctional use of high-quality conference, presentation and meeting spaces. Timetable Smart is ideal for multipurpose are-as and temporary workspaces. With a flip-top table top they nest compactly into one another. Time-table Smart comes with a locking mechanism and staggered storage is possible.

Frame

Timetable / Timetable SmartFoot section in die-cast aluminium, bright chrome plated or polished. Uprights and underframes in tubu-lar steel, coated in black or with a silver satin finish. Uprights optional-ly available with a bright chrome-plated finish (standard Timetable only). Die-cast zinc table top bearer, coated black, Timetable Smart with table top bearer in steel profile, draw rod in round steel tubing, coated black. Lockable, height ad-justable, swivel castors with a black polyamide tyre are the standard version for carpeted floors; castors available with a polyurethane tyre for hard floors (please specify when ordering).

Timetable Shift

StandardsThe Timetable Shift tables comply with the DIN EN 527 standard.

FrameDie-cast aluminium foot section, bright chrome plated, polished or silver satin finish or black coating. Aluminium profile upright, clear anodised or silver satin finish, or black coating; in bright chrome-plated foot sections, coated in black. Upright optionally available bright chrome plated. Aluminium profile underframe, with integrated cable channel, depending on the foot section coated in silver satin finish or black. Steel profile table top bearer. Round steel tube draw rod, depending on foot section, black or silver satin finish coating. Lockable, height-adjustable poly-amide swivel castors.

Core material of table topParticle board with bullnose wood lipping with integral, impact-resil-ient profile in black elastomer. Timetable Smart with melamine resin directly coated in light or dark grey and with straight, colour-matched plastic lipping, or option-ally with plywood with bullnose, wood edge with integrated im-pact-resilient profile made of black elastomer.

Table top group 1 – laminateTable top thickness 26 mm (1⅜") Laminate based on the Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish.

Table top group 2 – veneerTable top thickness 26 mm (1") Variation 1: Beech, oak and ash veneer from Wilkhahn woodstain colour sam-ples with wood lipping, as far as possible in the same colour as the veneer.Variation 2: maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer from the Wilkhahn woodstain col-our samples with wood lipping as far as possible in the same colour as the veneer.

Veneer typesAs a standard, the veneers are made by slip-match method.Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer.Some specific growth features possible.

147

Edge profiles



Timetable Smart, bonded surface straight edge

Frame versions Foot section Upright and underframe Top bearer

51 Bright chrome plated Silver satin finish or black coating or bright cromium plated

Coated black

52 Aluminium polished Coated silver satin finish or black ( Timetable / Timetable Smart)Uprights clear anodized ( Timetable Shift)

Coated black ( Timetable / Timetable Smart)Coated silver satin finish or black ( Timetable Shift)

53 Coated black (Timetable Shift)

Coated silver satin finish or black Coated silver satin finish or black

60 Coated, silver satin finish (Timetable Shift)

Coated silver satin finish or black Coated silver satin finish or black

Table top group 3 – linoleumTable top thickness 27 mm (11/8") Linoleum from the Wilkhahn woodstain colour samples, with laminated beech lipping, natural oiled finish.

Table top group 5 – direct coating (only for Timetable Smart)Table top thickness 25 mm (1”) thick Melamine resin, directly coated in light or dark grey with plastic lip-ping in the same colour as the fin-ish.

Further finishes for the formats shown in the price list are available on request.

Modesty panelsAluminium frame, coated with a sil-ver satin finish, in anthracite or cov-ered with black fabric. Black, poly-amide handles.

Table-table-connectors ( optional)Metal table-table-connectors model 613: 2 lockable circlips made of black coated sheet steel with 4 star-grip screws and additionally and additionally for Timetable Smart: plastic table-table-connectors. Model 616: two rotatable circlips and two collets made of black through-dyed glass fibre-rein-forced polyamide with washers.


148

Rectangular 610/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated 1788 2100 2438 2232

Additional chargesFoot section bright chrome plated, upright and underframe aluminium coated 63 • • • •Foot section and upright bright chrome plated, underframe aluminium coated 107 • • • •

Modesty panel aluminium coated (length 140 cm (55⅛")) 659 • • • •Modesty panel aluminium coated (length 150 cm (59")) 665 • • • •Modesty panel aluminium coated (length 160 cm (63")) 673 • • • •Modesty panel aluminium coated (length 180 cm (70⅞")) 685 • • • •


Depth

Length60

(23⅝")70

(27½")75

(29½")80

(31½") 140 (55⅛") 1577 1652 1729 1766 150 (59") 1636 1728 1788 1811 160 (63") 1696 1785 1824 1847 180 (70⅞") 1754 1832 1878 1908

140 (55⅛") 1757 1868 1979 2050 150 (59") 1846 1997 2100 2132 160 (63") 1934 2090 2157 2185 180 (70⅞") 2020 2159 2235 2285

140 (55⅛") 1985 2125 2265 2367 150 (59") 2104 2288 2438 2472 160 (63") 2223 2417 2483 2540 180 (70⅞") 2338 2503 2583 2664

140 (55⅛") 1848 1975 2104 2158 150 (59") 1951 2120 2232 2262 160 (63") 2054 2207 2293 2323 180 (70⅞") 2155 2306 2381 2439

• available

All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).

Timetable Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

149

Elliptical 610/10 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated 1909 2286 2676

Additional chargesFoot section bright chrome plated, upright and underframe aluminium coated 63 • • •Foot section and upright bright chrome plated, underframe aluminium coated 107 • • •

• available


Timetable Tables


Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € € €

150

Arc-shaped module 30° 610/15 e.g. 80 x 120/161, H 73 (31½" x 47¼"/63⅜", H 28¾"), Stackable The swivel release can be located on the inner or the outer radius. Please specify when ordering. Foot sections aluminium polished, upright and underframe aluminium coated 1712 2087 2462 2248

Additional chargesFoot section bright chrome plated, upright and underframe aluminium coated 63 • • • •Foot section and upright bright chrome plated, underframe aluminium coated 107 • • • •


Depth

Length70

(27½")80

(31½") 120/156

47¼"/61⅜" 1664 – 120/161

47¼"/63⅜" – 1712

120/156 47¼"/61⅜" 2039 –

120/161 47¼"/63⅜" – 2087

120/156 47¼"/61⅜" 2414 –

120/161 47¼"/63⅜" – 2462

120/156 47¼"/61⅜" 2200 –

120/161 47¼"/63⅜" – 2248



Timetable Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

151

Rectangular 612/00e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storageFoot sections aluminium polished, upright and underframe aluminium coated 1002 1364 1646 1965 1787

Additional chargesFoot section bright chrome plated, upright and underframe aluminium coated 63 • • • • •

Table-table-connectors model 613, metal (2 items) 100 – • • • •Table-table-connectors model 616, plastic (2 items) 64 • • • • •

Depth

Length60

(23⅝")70

(27½")75

(29½") 120 (47¼") 930 – – 140 (55⅛") – 999 – 150 (59") 997 – 1002

120 (47¼") 1282 – – 140 (55⅛") – 1351 – 150 (59") 1348 – 1364

120 (47¼") 1567 – – 140 (55⅛") – 1637 – 150 (59") 1628 – 1646

120 (47¼") 1872 – – 140 (55⅛") – 1950 – 150 (59") 1943 – 1965

120 (47¼") 1707 – – 140 (55⅛") – 1776 – 150 (59") 1768 – 1787



Timetable Smart Tables

Table top group

5 1 2 2 3

Bond

ed su

rfac

e

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

152

Rectangular 614/00 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated 1559 1854 2171 2004

Additional chargesPolished aluminium foot section, uprights clear anodized, underframes coated 82 • • • •Bright, chrome plated aluminium foot section, uprights and underframes coated 172 • • • •Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated 384 • • • •

Modesty panel aluminium coated (length 150 cm (59")) 665 • • • •Modesty panel aluminium coated (length 160 cm (63")) 673 • • • •Modesty panel aluminium coated (length 180 cm (70⅞")) 685 • • • •Modesty panel aluminium coated (length 200 cm (78¾")) 695 • • • •Modesty panel aluminium coated (length 210 cm (82⅝")) 834 • • • •


Depth

Length80

(31½")90

(35⅜")100

(39⅜")105

(41⅜") 150 (59") 1319 1369 – – 160 (63") 1369 1467 1591 – 180 (70⅞") 1482 1559 1816 1922 200 (78¾") 1675 1785 2043 2113 210 (82⅝") 1846 1953 2245 2329

150 (59") 1541 1616 – – 160 (63") 1616 1766 1898 – 180 (70⅞") 1787 1854 2164 2262 200 (78¾") 1993 2115 2428 2567 210 (82⅝") 2188 2298 2633 2732

150 (59") 1847 1886 – – 160 (63") 1886 2096 2217 – 180 (70⅞") 2134 2171 2518 2615 200 (78¾") 2307 2466 2817 2962 210 (82⅝") 2559 2661 3021 3137

150 (59") 1720 1739 – – 160 (63") 1739 1939 2050 – 180 (70⅞") 1972 2004 2335 2469 200 (78¾") 2187 2279 2620 2732 210 (82⅝") 2362 2470 2838 2934



Timetable Shift Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

153

Barrel shape 614/42 e.g. 80/100 x 180, H 73 (31¼"/39⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated 1905 2252 2604 2423

Additional chargesPolished aluminium foot section, uprights clear anodized, underframes coated 82 • • • •Bright, chrome plated aluminium foot section, uprights and underframes coated 172 • • • •Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated 384 • • • •

Depth

Length80/100

(31½"/39⅜")80/105

(31½"/41⅜") 180 (70⅞") 1905 – 210 (82⅝") – 2416

180 (70⅞") 2252 – 210 (82⅝") – 2819

180 (70⅞") 2604 – 210 (82⅝") – 3226

180 (70⅞") 2423 – 210 (82⅝") – 3021



Timetable Shift Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

154



Cable holder under the table top with hook and loop fastener






Integrated techni-station Compact 701/95








Additional charges


Timetable Built-in component sets

Integrated Techni-Station Rotate set consisting of: € Integrated techni-station compact set 701/95 consisting of: €

155








Additional charges



Cable outlet set consisting of: €

156


Cable channel to integrate the socket strip




Table top group 1 Laminate 1101Table top group 2 Variation 1 and 2 1322Table top group 3 Linoleum 1101Incl. fastening material for socket strip Please order socket strip separately.Attachable at 15° or vertically (please stated angle when ordering)

Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 494Incl. fastening material for socket strip Please order socket strip separately.Attachable at 15° or vertically (please stated angle when ordering)


Strain anchor 614/8

Cable holder 614/9



Table top group 1 Laminate 744Table top group 2 Variation 1 and 2 1322Table top group 3 Linoleum 744Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle horizontal in the underframe

Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 494Incl. fastening material for socket strip Please order socket strip separately.Possible attachment angle horizontal in the underframe


Additional charges


Additional charges



Single table portal set Executive or Basic: €For mod. 614/00 insert in position M2 Single table portal set Executive or Basic: €

157




708/5 Socket strip with 4 modules 5462 x power supply modules (state local standard on orders).Please or-der supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")

708/6 Socket strip with 5 modules 3233 x power supply modules (state local standard on orders).Please or-der supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")

Additional charges




Socket strips for Set Einbauklappe: €

158

Timetable

610/00 612/00

A1 A2 A3

610/10

A2A1 A3

Set Mounting position A 1 A 2 A 3 A 1 A 2 A 3Integrated techni-station on both sides 701/60 | 701/70 – • – – • –

Single table portal Executive | Basic – •1 – – • –


Cable outlet set 707/1 | 707/2 | 707/3 • • • • • •

1 from 75 cm table width


A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M 2.

Timetable Mounting positions


159

Timetable Timetable Smart

610/15 612/00

A1 A2 A3

Set Mounting position A 1 A 2 A 3 A 1 A 2 A 3Integrated techni-station on both sides 701/60 | 701/70 – • – – • –

Single table portal Executive | Basic – – – – – –


Cable outlet set 707/1 | 707/2 | 707/3 • • • • • •





160

Timetable Shift

614/00 614/42

M2

A1 A2 A3

M2

Set Mounting position A 1 A 2 A 3 M 2 M 2Integrated techni-station on both sides 701/60 | 701/70 – • – – –

Single table portal Executive | Basic – •2 – • •

Integrated techni-station Compact 701/95 • • • • •

Cable outlet set 707/1 | 707/2 | 707/3 • • • • •

2 from 100 cm table depth• available – not available




161



60



130



130

Timetable Accessories

€

162

24 ,Timetable

12 x 610/15, 120/161x80

624

20 ,Timetable

6 x 610/15, 120/161x804 x 610/00, 160x80

632

624

610 rangeTimetableExample configurations

163

24 ,Timetable

8 x 610/15, 120/161 x 803 x 610/00, 160x801 x 610/00, 180x90, Ellipsenform

977

530

164

21 (28) ,Timetable Shift

7 (8) x 614/00, 210x105

630

420

18 (22) ,Timetable Shift

6 x 614/00, 210x105

630

210

20 ,Timetable Smart

10 x 612/51, 150x60

530

450

610 rangeTimetableExample configurations

166

Edge profiles



Alternatively: Chamfer edge profile on veneer version

Frame versions Foot section Upright Top bearer and underframe

51 Bright chrome plated Black coated or bright chrome plated

Coated black

52 Aluminium polished Clear anodized Coated, silver satin finish53 Coated black Coated black Coated black60 Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish

620 rangeLogonDesign: Andreas Störiko

Technical details

FunctionStand-alone tables for use in offic-es, and system components for per-manently linked table configura-tions in conference rooms. Ideal for combining with Confair folding tables for versatile, partitionable conference rooms.

FrameFoot section in die-cast aluminium, bright chrome plated, polished or coated black or silver, satin finish. Aluminium profile uprights, clear anodized or coated; coated black for bright chrome plated foot sec-tion.Die-cast aluminium table top bear-er coated in either silver satin finish or black, depending on foot section version.Aluminium profile underframe coated in silver satin finish or black, depending on foot section version. Uprights optionally available bright chrome plated. Centre underframe for table depths 75 – 90 cm (29½" – 35⅜"); two separate underframes for table depths 105 – 130 cm (41⅜" – 51⅛"). Adjustable glides in black poly-amide. Lockable castors in black polyamide.

Core material of table topParticle board with bullnose dou-ble, wood lipping and impact-resil-ient profile in black elastomer.MDF panel only in combination with veneered surface finish with colour-matched, chamfered wood lipping (with a radiused edge).For system elements: central join-ing edge straight without any pro-file.

Table top group 1 – laminateThickness 26 mm (1")Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish.

Table top group 2 – veneerTable top thickness 26 mm (1")Variation 1:Beech, oak or ash veneer (excep-tion: ash, natural finish, is not avail-able with a chamfered edge ver-sion) according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.Variation 2:Maple (exception no natural maple in chamfered-edge versions), wal-nut or elm veneer as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour sam-ples with wood lipping, as far as possible in the same colour as the veneer. (Maple, natural finish, is not available with a chamfered edge version).


Table top group 3 – linoleum:Thickness 27 mm (1⅛")Linoleum according to Wilkhahn linoleum colour samples with laminated beech lipping, natural oiled finish.


Modesty panelsFluted extruded aluminium profile, clear anodized or coated black.Screw connectors to table top, clear anodized.Modesty panels may also be retro-fitted.Price on request.

Single table portalPortal with brushed profile the same colour and material as the ta-ble top on both sides. Aperture with real wood lipping, as far as possible in the same colour as the table top. Hinge can be opened to 180°.Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞")Linoleum on request.

StandardsLogon tables conform to the Standard ANSI / BIFMA X 5.5.


167

Rectangular 620/00e.g. 120 x 240, H 73 (47¼" x 94½", H 28¾")Foot section and upright aluminium coated 1955 2076 2642 2322

Additional chargesFoot section aluminium polished, upright aluminium, clear anodized 82 • • • •Foot section aluminium bright chrome plated, upright aluminium, coated black 172 • • • •Foot section and upright aluminium bright chrome plated 384 • • • •

Modesty panel aluminium coated (length 150 cm (59")) 399 • • • •Modesty panel aluminium clear anodized (length 150 cm (59")) 422 • • • •Modesty panel aluminium coated (length 180 cm (70⅞")) 461 • • • •Modesty panel aluminium clear anodized (length 180 cm (70⅞")) 486 • • • •Modesty panel aluminium coated (length 240 cm (94½")) 625 • • • •Modesty panel aluminium clear anodized (length 240 cm (94½")) 664 • • • •

With castors (available up to a max. length of 210 cm (78¾")) 152 • • • •

Depth

Length75

(29½")80

(31½")90

(35⅜")100

(39⅜")110

(43¼")120

(47¼")130

(51⅛")

150 (59") 1248 1480 1557 1589 1630 1692 1706 160 (63") 1358 1527 1587 1606 1654 1709 1716 180 (70⅞") 1406 1572 1619 1702 1717 1741 1759 200 (78¾") 1484 1643 1700 1798 1812 1837 1857 220 (86⅝") 1525 1703 1784 1880 1895 1923 1988 230 (90½") 1546 1767 1840 1892 1915 1940 2049 240 (94½") 1563 1784 1869 1919 1944 1955 2076 300 (118⅛") – – – 2232 2274 2291 2451

150 (59") 1292 1535 1631 1651 1706 1768 1781 160 (63") 1414 1584 1649 1673 1738 1786 1803 180 (70⅞") 1461 1629 1682 1781 1802 1832 1851 200 (78¾") 1550 1711 1775 1888 1906 1935 1964 220 (86⅝") 1592 1776 1867 1948 1997 2022 2096 230 (90½") 1623 1850 1934 1997 2010 2042 2163 240 (94½") 1638 1867 1965 2012 2054 2076 2205 300 (118⅛") – – – 2357 2406 2429 2605

150 (59") 1539 1797 1915 1987 2068 2144 2215 160 (63") 1672 1859 1975 2004 2116 2219 2247 180 (70⅞") 1746 1958 2013 2166 2223 2258 2290 200 (78¾") 1859 2086 2153 2329 2355 2430 2467 220 (86⅝") 1956 2217 2296 2442 2494 2568 2675 230 (90½") 1999 2278 2389 2491 2556 2599 2758 240 (94½") 2038 2296 2473 2569 2604 2642 2807 300 (118⅛") – – – 2957 3017 3059 3298

150 (59") 1378 1631 1732 1786 1866 1936 1963 160 (63") 1508 1683 1785 1800 1927 1966 2003 180 (70⅞") 1575 1776 1808 1934 1979 2011 2034 200 (78¾") 1681 1845 1922 2069 2114 2154 2177 220 (86⅝") 1727 1926 2037 2145 2203 2263 2338 230 (90½") 1765 1990 2134 2200 2251 2286 2410 240 (94½") 1788 2037 2165 2273 2297 2322 2467 300 (118⅛") – – – 2650 2680 2703 2909


Logon Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

168

Barrel shape 627/42e.g. 100/120 x 260, H 73 (39⅜"/47¼" x 102⅜", H 28¾"),Foot section and upright aluminium coated 2683 2823 3451 3098


Depth

Length100/120

(39⅜"/47¼")100/130

(39⅜"/51⅛") 240 (94½") 2137 – 260 (102⅜") 2683 – 300 (118⅛") – 2560

240 (94½") 2246 – 260 (102⅜") 2823 – 300 (118⅛") – 2697

240 (94½") 2754 – 260 (102⅜") 3451 – 300 (118⅛") – 3314

240 (94½") 2469 – 260 (102⅜") 3098 – 300 (118⅛") – 2972


Logon Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

169

Round 621/35e.g. Ø 160, H 73 (Ø 63", H 28¾")Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer 3690 4688 4911 4765


Diameter 150 (59") 3669 160 (63") 3690

150 (59") 4568 160 (63") 4688

150 (59") 4762 160 (63") 4911

150 (59") 4622 160 (63") 4765

• available

Logon Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

170

Round 622/45e.g. Ø 180, H 73 (Ø 70⅞", H 28¾")Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer 3890 4597 5239 4891


Diameter 180 (70⅞") 3890 220 (86⅝") 4806

180 (70⅞") 4597 220 (86⅝") 5461

180 (70⅞") 5239 220 (86⅝") 6242

180 (70⅞") 4891 220 (86⅝") 5849

• available

Logon Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

171

Rounded short edge 620/11Starting element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Extendable with the 620/21, 620/31, 620/41, 624/51 modelsFoot section and upright aluminium coated 1619 1682 2013 1808


Depth

Length80

(31½")90

(35⅜")100

(39⅜")110

(43¼")120

(47¼")130

(51⅛") 160 (63") 1527 1587 1606 1654 1709 1716 180 (70⅞") 1572 1619 1702 1717 1741 1759 200 (78¾") 1643 1700 1798 1812 1837 1857 220 (86⅝") 1703 1784 1880 1895 1923 1988 240 (94½") 1784 1869 1919 1944 1955 2076

160 (63") 1584 1649 1673 1738 1786 1803 180 (70⅞") 1629 1682 1781 1802 1832 1851 200 (78¾") 1711 1775 1888 1906 1935 1964 220 (86⅝") 1776 1867 1948 1997 2022 2096 240 (94½") 1867 1965 2012 2054 2076 2205

160 (63") 1859 1975 2004 2116 2219 2247 180 (70⅞") 1958 2013 2166 2223 2258 2290 200 (78¾") 2086 2153 2329 2355 2430 2467 220 (86⅝") 2217 2296 2442 2494 2568 2675 240 (94½") 2296 2473 2569 2604 2642 2807

160 (63") 1683 1785 1800 1927 1966 2003 180 (70⅞") 1776 1808 1934 1979 2011 2034 200 (78¾") 1845 1922 2069 2114 2154 2177 220 (86⅝") 1926 2037 2145 2203 2263 2338 240 (94½") 2037 2165 2273 2297 2322 2467

• available

Logon Table configurations

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

172

Rounded short edge 620/21Finishing element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾")Foot section and upright aluminium coated 1241 1304 1635 1430


Depth

Length80

(31½")90

(35⅜")100

(39⅜")110

(43¼")120

(47¼")130

(51⅛") 160 (63") 1149 1209 1228 1276 1331 1338 180 (70⅞") 1194 1241 1324 1339 1363 1381 200 (78¾") 1265 1322 1420 1434 1459 1479 220 (86⅝") 1325 1406 1502 1517 1545 1610 240 (94½") 1406 1491 1541 1566 1577 1698

160 (63") 1206 1271 1295 1360 1408 1425 180 (70⅞") 1251 1304 1403 1424 1454 1473 200 (78¾") 1333 1397 1510 1528 1557 1586 220 (86⅝") 1398 1489 1570 1619 1644 1718 240 (94½") 1489 1587 1634 1676 1698 1827

160 (63") 1481 1597 1626 1738 1841 1869 180 (70⅞") 1580 1635 1788 1845 1880 1912 200 (78¾") 1708 1775 1951 1977 2052 2089 220 (86⅝") 1839 1918 2064 2116 2190 2297 240 (94½") 1918 2095 2191 2226 2264 2429

160 (63") 1305 1407 1422 1549 1588 1625 180 (70⅞") 1398 1430 1556 1601 1633 1656 200 (78¾") 1467 1544 1691 1736 1776 1799 220 (86⅝") 1548 1659 1767 1825 1885 1960 240 (94½") 1659 1787 1895 1919 1944 2089

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

173

Rectangular 620/31Intermediate element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾")Foot section and upright aluminium coated 1241 1304 1635 1430


Depth

Length80

(31½")90

(35⅜")100

(39⅜")110

(43¼")120

(47¼")130

(51⅛") 160 (63") 1149 1209 1228 1276 1331 1338 180 (70⅞") 1194 1241 1324 1339 1363 1381 200 (78¾") 1265 1322 1420 1434 1459 1479 220 (86⅝") 1325 1406 1502 1517 1545 1610

160 (63") 1206 1271 1295 1360 1408 1425 180 (70⅞") 1251 1304 1403 1424 1454 1473 200 (78¾") 1333 1397 1510 1528 1557 1586 220 (86⅝") 1398 1489 1570 1619 1644 1718

160 (63") 1481 1597 1626 1738 1841 1869 180 (70⅞") 1580 1635 1788 1845 1880 1912 200 (78¾") 1708 1775 1951 1977 2052 2089 220 (86⅝") 1839 1918 2064 2116 2190 2297

160 (63") 1305 1407 1422 1549 1588 1625 180 (70⅞") 1398 1430 1556 1601 1633 1656 200 (78¾") 1467 1544 1691 1736 1776 1799 220 (86⅝") 1548 1659 1767 1825 1885 1960

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

174

Corner element 90° 624/91Intermediate element 90 x 10 x R 227 x 10 x 90 x 30, H 73 (35⅜" x 3⅞" x R 89⅜" x 3⅞" x 35⅜" x 11¾", H 28¾")Foot section and upright aluminium coated 1138 1213 1489 1351

Additional chargesFoot section aluminium polished, upright aluminium, clear anodized 41 • • • •Foot section aluminium bright chrome plated, upright aluminium, coated black 86 • • • •Foot section and upright aluminium bright chrome plated 192 • • • •Modesty panel aluminium coated 162 • • • •Modesty panel aluminium clear anodized 177 • • • •


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

175

Semi-barrel shape 627/51Starting element e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾") Extendable with the 627/61 and 620/31 modelsFoot section and upright aluminium coated 2319 2420 2888 2618


Depth

Length100/130

(39⅜"/51⅛") 160 (63") 2276 180 (70⅞") 2319 200 (78¾") 2418

160 (63") 2372 180 (70⅞") 2420 200 (78¾") 2532

160 (63") 2846 180 (70⅞") 2888 200 (78¾") 3065

160 (63") 2587 180 (70⅞") 2618 200 (78¾") 2761

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

176

Semi-barrel shape 627/61Finishing element e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾")Foot section and upright aluminium coated 1941 2042 2510 2240


Depth

Length100/130

(39⅜"/51⅛") 160 (63") 1898 180 (70⅞") 1941 200 (78¾") 2040

160 (63") 1994 180 (70⅞") 2042 200 (78¾") 2154

160 (63") 2468 180 (70⅞") 2510 200 (78¾") 2687

160 (63") 2209 180 (70⅞") 2240 200 (78¾") 2383

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

177

Semi-oval 628/51Starting element e.g. 120 x 180, H 73 (47¼" x 70⅞", H 28¾") Extendable with the 628/61 and 620/31 modelsFoot section and upright aluminium coated 2319 2420 2888 2618


Depth

Length120

(47¼") 160 (63") 2276 180 (70⅞") 2319 200 (78¾") 2418

160 (63") 2372 180 (70⅞") 2420 200 (78¾") 2532

160 (63") 2846 180 (70⅞") 2888 200 (78¾") 3065

160 (63") 2587 180 (70⅞") 2618 200 (78¾") 2761

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

178

Semi-oval 628/61Finishing element e.g. 120 x 180, H 73 (47¼" x 70⅞", H 28¾")Foot section and upright aluminium coated 1941 2042 2510 2240


Depth

Length120

(47¼") 160 (63") 1898 180 (70⅞") 1941 200 (78¾") 2040

160 (63") 1994 180 (70⅞") 2042 200 (78¾") 2154

160 (63") 2468 180 (70⅞") 2510 200 (78¾") 2687

160 (63") 2209 180 (70⅞") 2240 200 (78¾") 2383

• available

M1


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

179

Semi-circle 622/11Starting element 180 x 90, H 73 (70⅞" x 35⅜", H 28¾") Extendable with the 622/21 and 622/31 modelsFoot section and upright aluminium coated 2322 2676 2997 2822


• available

Semi-circle 622/21Finishing element 180 x 90, H 73 (70⅞" x 35⅜", H 28¾")Foot section and upright aluminium coated 1566 1920 2241 2066


• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

180

Rectangular 622/31Intermediate element e.g. 180 x 160, H 73 (70⅞" x 63", H 28¾")Foot section and upright aluminium coated 2503 2628 3281 2900


Depth

Length180

(70⅞") 80 (31½") 2109 160 (63") 2503 220 (86⅝") 2898

80 (31½") 2191 160 (63") 2628 220 (86⅝") 3065

80 (31½") 2640 160 (63") 3281 220 (86⅝") 3921

80 (31½") 2396 160 (63") 2900 220 (86⅝") 3403

• available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

181

Arc-shaped module 30° 620/41Intermediate element90 x 155, Ri 210/Ra 300, H 73(as an extension for table configuration in Ø 600 cm)Foot section and upright aluminium coated, frame with welded rectangular underframe 1699 1771 2001 1890


• available Ri Inside radius Ra Outside radius








Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

182

622/00 V-shaped configuration for video conference310 x 364, H 73 / 150 x 384, H 73 (122" x 143¼", H 28¾" / 59" x 151⅛", H 28¾")

Table configuration for 10 – 12, Comprising 3 table elements, Veneer direction: cross veneer (Optionally with modesty panels and modules with power supply on request)Foot section and upright aluminium coated, foot plate coated black, central column coated 13909 14813 16452Foot section aluminium bright chrome plated, upright aluminium, coated black, foot plate coated black, central column bright chrome plated 14509 15413 17052



Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

183



60



130



130

Logon Accessories

€

184

Integrated techni-station Basic 701/00 or 701/10




Set price integrated techni-station Basic 701/00 with 3 modules: 552













Additional chargesTechni-station with mechanism that opens by pressing the top 74


620/2 Vertical cable channel for channelling cables between uprightsCoated black or silver satin finish 322

620/1 CPU holder for assembly between the uprights 358





Logon Built-in component sets

Integrated techni-station basic set consisting of: € Integrated Techni-Station Rotate set consisting of: €

185

Integrated techni-station Move 701/85 or Compact 701/95



Set price integrated techni-station Move 701/85 with 4 modules: 821











Additional chargesCable harness covered with black fabric sleeving 100



Additional chargesCable harness covered with black fabric sleeving 100




Integrated techni-station move set or Compact consisting of: € Cable outlet set consisting of: €

186








Additional charges










Additional charges




Single table portal set consisting of: € Socket strips for Set Einbauklappe: €

188

Table depth ≤ 90 cm Table depth > 90 cm

620/00 620/00 627/42

M1 M3

620/11 620/11 627/51

A1 A3

M1 M3

620/31 620/31 627/61

620/21 620/21 628/51

A1 A3

M1 M3

620/41 628/61

M1M1 M3

Set Mounting position A 11 A 2 A 31 A 11 A 2 A 31 M 11 M 2 M 31

Integrated techni-station Basic 701/00 | 701/10 • • • •2 •2 •2 • • •

Integrated techni-station on both sides 701/60 | 701/70 • • • •2 •2 •2 • • •

Single table portal Executive | Basic • • • • • • • • •

Integrated techni-station Move 701/85 – – – – – – – – –

Integrated techni-station Compact 701/95 • • • • • • • • •

Cable outlet set 707/1 | 707/2 | 707/3 • • • • • • • • •

1 from 200 cm table width2 from 120 cm table depth• available – not available


Logon Mounting positions


189

621/35

622/45

Set Mounting position A 11 A 31 M 11 M 2 M 31 B 11 B 31

Integrated techni-station Basic 701/00 | 701/10 • • • – • • •

Integrated techni-station on both sides 701/60 | 701/70 • • • – • • •

Single table portal Executive | Basic • • • – • • •

Integrated techni-station Move 701/85 – – • • • – –

Integrated techni-station Compact 701/95 • • • • • • •

Cable outlet set 707/1 | 707/2 | 707/3 • • • • • • •

1 from 200 cm diameter


Logon Mounting positions


190

36 ,3 x 620/11, 240x903 x 620/21, 240x903 x 620/31, 160x90

6 x 620/11, 153x90, 45°

772

580

740

900

12 ,4 x 620/41, 191x90, 90°

270

620 rangeLogonExample configurations

191

20 ,1 x 622/11, 180x90 1 x 622/21, 180x90

2 x 622/31, 220x180

620

180

20 ,4 x 620/31, 220x90

4 x 624/91, 90x10xR227x10x90x30, 90°

442

442

18 ,1 x 620/11, 220x90 1 x 620/21, 220x90 2 x 620/31, 220x90

4 x 620/41, 191x90, 90°

270

575

18 ,1 x 627/51, 100/130x1801 x 627/61, 100/130x180

2 x 620/31, 130x180

720 (283⅜")

130 (51⅛")

192

Frame versions Tables Disc base with cover Table column Table top bearer

49 Coated white Coated white Coated black


71 Polished stainless steel coated or bright chrome plated

Coated black

632 range

Technical details

FunctionCentre pedestal tables for meet-ings, cafeterias or dining rooms at home.

Frame models 632/00, diameter 90, 110, 125 cm Steel disc base (Ø 610 mm) with sheet steel cover, coated in white or black, or with optional ultra- polished stainless steel cover. Steel column to match the foot section, coated in black or white, with stain-less steel ultra-polished foot sec-tion, table column is bright chrome- plated. Table top bearer (cross brace) in black.

Frame model 632/00, 150 cm in diameterSteel disc base (Ø 735 mm) with sheet steel cover, coated in white or black, or with optional ultra- polished stainless steel cover. Steel column to match the foot section, coated in black or white, with stain-less steel ultra-polished foot sec-tion, table column is bright chrome- plated. Connecting flange in steel and coated in black.

Core material of table topParticle board with straight, colour-matched wood lipping.

Table top group 1 – laminateTable top thickness 26 mm (1")Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish.

Table top group 2 – veneerTable top thickness 26 mm (1")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.Variation 2:Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.




193

Round 632/00Ø 90, H 73 (Ø 35⅜", H 28¾")Frame coated 1025 1171 1204

Additional chargesDisc base with ultra-polished, stainless steel cover 87 87 87Bright chrome plated table column 64 64 64

Round 632/00Ø 110, H 73 (Ø 43¼", H 28¾")Frame coated 1200 1345 1397


Round 632/00Ø 125, H 73 (Ø 49¼", H 28¾")Frame coated 1326 1541 1607


Round 632/00Ø 150, H 73 (Ø 59", H 28¾")Frame coated 1953 2002 2095


632 range Tables

Table top group

1 2 2

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

194

Frame versions Table frame and edge profiles

51 bright chrome plated aluminium53 Coated black60 Coated, silver satin finish62 Clear anodized

Edge profiles Frame legs for 73 cm table heightModel 641Square

Model 643Round

Straight

640 rangePaletteDesign: Karlheinz Rubner

Technical details

Please note: check in advance to see whether the edge profiles are available for the relevant table shapes and configurations. Additional charges for profiles that are not straight on request. Only tables with straight edges can be linked.

FunctionFlexible, impressive-looking table system with options ranging from the standalone table to sophisticat-ed conference table systems for of-fice, seminar and conference rooms. Table top formats, lipping and table leg shapes can be adapt-ed to suit different design concepts. Ideal for customised conference ta-ble systems and integrating state-of-the-art multi-media equipment.

Standardised system panels for table configurations:All standardised system panels can be connected with one another. Panels for specific table systems can only be combined with each other, i.e. and not with standardised sys-tem panels.

FrameLegs in square aluminium profile 100 x 100 mm (3⅞” x 3⅞"), clear anodised or coated, with four bolts each and connected with a bayo-net lock integrated into the table top. Optionally with legs in round aluminium tubing ø 65 mm (2½") – also possible here with a bright chrome-plated finish.Base elements with black polyam-ide glides.

Core material of table topParticle board with straight, con-cealed lipping. On request, lipping also with bullnose profile (sides of tables that are to be linked are only available with a straight edge). Integrated connecting mechanism for attaching the legs.

Table top group 1 – laminateThickness 39 mm (1½")Laminate based on Wilkhahn col-our and surface finish samples with laminated beech lipping, natural oiled finish

Table top group 2 – veneerTable top thickness 39 mm (1½") Variation 1: Beech veneer based on Wilkhahn woodstain colour samples with laminated beech lipping, as far as possible in the same colour as the veneer, or oak or ash veneer based on Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer and Wilkhahn Mocca veneer based on the Wilkhahn woodstain colour samples with lipping, as far as pos-siblew in the same colour as the ve-neer.

Veneer typesAs a standard, the veneers are made by slip-match method.Surfaces sealed with clear lacquer: open pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer.Bottom of table in beech veneer, mostly colour matched with the veneer on the table top.Some specific growth features possible.

Table top group 3 – linoleumTable top thickness 40 mm (15/8"). Linoleum from the Wilkhahn woodstain colour samples, with laminated beech lipping, natural oiled finish.


StandardsThe Palette tables comply with the ANSI / BIFMA X 5.5 standard.


Adjoining table systems can be matched up to a maximum length of 270 cm (106¼“).

The prices for table tops and frame legs are listed separately.

Please state the number of frame legs required in the order.

195

Rectangular 640/00Table top e.g. 80 x 160 (31½" x 63") with 4 connecting mechanisms for fixing frame legs (square table systems cannot be used as corner elements) 991 1182 1498 1182

Additional charges1 aluminium coated frame leg, Mod. 641 or 643 1611 aluminium anodised frame leg, Mod. 641 or 643 2271 round, chrome plated aluminium frame leg, Mod. 643 268

Depth

Length70

(27½")75

(29½")80

(31½")90

(35⅜")100

(39⅜")105

(41⅜")120

(47¼")130

(51⅛")140

(55⅛")150 (59")

90 (35⅜") 723 739 750 761 877 907 949 970 – – 140 (55⅛") 857 942 952 1026 1067 1113 1142 1156 1274 – 150 (59") 904 952 966 1043 1092 1145 1163 1171 – 1431 160 (63") – – 991 1070 1118 1176 1242 1273 – – 180 (70⅞") – – 1032 1074 1202 1262 1327 1360 – – 200 (78¾") – – – 1159 1303 1340 1436 1484 – – 210 (82⅝") – – – 1247 1336 1359 1466 1520 – –

90 (35⅜") 834 853 862 867 1034 1085 1112 1126 – – 140 (55⅛") 1093 1119 1129 1200 1255 1307 1334 1349 1726 – 150 (59") 1109 1129 1158 1233 1297 1337 1360 1372 – 1890 160 (63") – – 1182 1277 1352 1406 1528 1589 – – 180 (70⅞") – – 1232 1284 1471 1526 1630 1683 – – 200 (78¾") – – – 1389 1579 1645 1743 1792 – – 210 (82⅝") – – – 1493 1635 1661 1837 1924 – –

90 (35⅜") 1013 1032 1045 1065 1247 1304 1350 1372 – – 140 (55⅛") 1282 1380 1429 1517 1610 1646 1714 1748 2145 – 150 (59") 1356 1429 1476 1578 1638 1722 1756 1775 – 2488 160 (63") – – 1498 1637 1838 1895 1988 2036 – – 180 (70⅞") – – 1567 1677 1910 1975 2099 2160 – – 200 (78¾") – – – 1766 2015 2100 2243 2316 – – 210 (82⅝") – – – 1896 2082 2130 2359 2472 – –

90 (35⅜") 834 853 862 867 1034 1085 1112 1126 – – 140 (55⅛") 1093 1119 1129 1200 1255 1307 1334 1349 1726 – 150 (59") 1109 1129 1158 1233 1297 1337 1360 1372 – 1890 160 (63") – – 1182 1277 1352 1406 1528 1589 – – 180 (70⅞") – – 1232 1284 1471 1526 1630 1683 – – 200 (78¾") – – – 1389 1579 1645 1743 1792 – – 210 (82⅝") – – – 1493 1635 1661 1837 1924 – –

– not available

Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

196

Corner element 90° 640/10Extension leaf e.g. 80 x 80 (31½" x 31½") with four connecting mechanisms for fixing frame legs to extend model 640/00 1284 1503 1688 1396


Depth

Length80

(31½")90

(35⅜") 80 (31½") 1284 – 90 (35⅜") – 1296

80 (31½") 1503 – 90 (35⅜") – 1509

80 (31½") 1688 – 90 (35⅜") – 1708

80 (31½") 1396 – 90 (35⅜") – 1402

– not available

Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

197

Arc-shaped module 30° 640/11Extension leaf e.g. 80 x 165, Ri 220/Ra 300 (31½" x 65") with four connecting mechanisms for fixing frame legs to extend model 640/00 1352 1553 1888 1445


Depth

Length80

(31½") (Ri 220/Ra 300)90

(35⅜") (Ri 220/Ra 310) 165 (65") 1352 – 170 (66⅞") – 1394

165 (65") 1553 – 170 (66⅞") – 1712

165 (65") 1888 – 170 (66⅞") – 1957

165 (65") 1445 – 170 (66⅞") – 1605

– not available Ri Inside radius Ra Outside radius

Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

198

Arc-shaped module 45° 640/11Extension leaf e.g. 80 x 162, Ri 120/Ra 200 (31½" x 63¾") with four connecting mechanisms for fixing frame legs to extend model 640/00 1352 1553 1888 1445


Depth

Length80

(31½") (Ri 120/Ra 200)90

(35⅜") (Ri 120/Ra 210) 162 (63¾") 1352 – 170 (66⅞") – 1394

162 (63¾") 1553 – 170 (66⅞") – 1712

162 (63¾") 1888 – 170 (66⅞") – 1957

162 (63¾") 1445 – 170 (66⅞") – 1605


Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

199

Arc-shaped module 90° 640/11Extension leaf e.g. 80 x 184, Ri 45/Ra 125 (31½" x 72½") with four connecting mechanisms for fixing frame legs to extend model 640/00 1390 1734 2052 1574


Depth

Length80

(31½") (Ri 45/Ra 125)90

(35⅜") (Ri 45/Ra 135) 184 (72½") 1390 – 198 (78") – 1533

184 (72½") 1734 – 198 (78") – 1924

184 (72½") 2052 – 198 (78") – 2301

184 (72½") 1574 – 198 (78") – 1764


Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

200

Semi-oval 640/71Starter tabletop panel 120 x 150 (47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 640/81 and 640/00 models in 120 cm depth 1592 1789 2185 1789


Semi-oval 640/81End tabletop panel 120 x 150 (47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 640/81 and 640/00 models in 120 cm depth 1592 1789 2185 1789


Palette Tables

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

201

Semi-barrel shape 644/51Starter tabletop panel 90/120 x 150 (35⅜"/47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 644/61 and 644/31 models 1699 1896 2292 1896


Semi-barrel shape 644/61End tabletop panel 90/120 x 150 (35⅜"/47¼" x 59") with 4 connecting mechanisms for fixing frame legs 1699 1896 2292 1896


Palette Table configurations

Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

202

Rectangular 644/71Extension leaf e.g. 120 x 90 (35⅜" x 47¼")) with 4 connecting mechanisms for fixing frame legs 948 1111 1349 1111


Depth

Length120

(47¼") 80 (31½") 927 90 (35⅜") 948 100 (39⅜") 1002 120 (47¼") 1098 130 (51⅛") 1120

80 (31½") 1086 90 (35⅜") 1111 100 (39⅜") 1186 120 (47¼") 1289 130 (51⅛") 1314

80 (31½") 1306 90 (35⅜") 1349 100 (39⅜") 1442 120 (47¼") 1585 130 (51⅛") 1628

80 (31½") 1086 90 (35⅜") 1111 100 (39⅜") 1186 120 (47¼") 1289 130 (51⅛") 1314


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

203

Semi-circle 644/11Starter tabletop panel e.g. 160 x 80 (63 x 31½") with 3 connecting mechanisms for fixing frame legs Extendable with the 644/21 and 644/31 models 1446 1637 1953 1637


Depth

Length160 (63")

180 (70⅞")

80 (31½") 1446 – 90 (35⅜") – 1529

80 (31½") 1637 – 90 (35⅜") – 1739

80 (31½") 1953 – 90 (35⅜") – 2092

80 (31½") 1637 – 90 (35⅜") – 1739

– not available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

204

Semi-circle 644/21End tabletop panel e.g. 160 x 80 (63 x 31½") with 3 connecting mechanisms for fixing frame legs 1446 1637 1953 1637


Depth

Length160 (63")

180 (70⅞")

80 (31½") 1446 – 90 (35⅜") – 1529

80 (31½") 1637 – 90 (35⅜") – 1739

80 (31½") 1953 – 90 (35⅜") – 2092

80 (31½") 1637 – 90 (35⅜") – 1739

– not available


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

205

Rectangular 644/31Extension leaf e.g. 160 x 90 (63 x 35⅜") with 4 connecting mechanisms for fixing frame legs 1070 1278 1637 1278


Depth

Length160 (63")

180 (70⅞")

80 (31½") 991 1032 90 (35⅜") 1070 1074 100 (39⅜") 1118 1202 120 (47¼") 1242 1327 130 (51⅛") 1273 1361

80 (31½") 1182 1233 90 (35⅜") 1278 1284 100 (39⅜") 1352 1471 120 (47¼") 1529 1630 130 (51⅛") 1590 1683

80 (31½") 1498 1567 90 (35⅜") 1637 1678 100 (39⅜") 1838 1910 120 (47¼") 1989 2099 130 (51⅛") 2036 2161

80 (31½") 1182 1233 90 (35⅜") 1278 1284 100 (39⅜") 1352 1471 120 (47¼") 1529 1630 130 (51⅛") 1590 1683


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

206

Semi-barrel shape 645/51Starter tabletop panel 100/150 x 160 with 5 connecting mechanisms for fixing frame legs Extendable with the 645/61 and 645/31 models 2046 2505 3103 2505


Semi-barrel shape 645/61End tabletop panel 100/150 x 160 with 5 connecting mechanisms for fixing frame legs 2046 2505 3103 2505



Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

207

Rectangular 645/71Extension leaf e.g. 150 x 90 (59 x 35⅜") with 6 connecting mechanisms for fixing frame legs 1204 1394 1738 1394


Depth

Length150 (59")

80 (31½") 1126 90 (35⅜") 1204 100 (39⅜") 1252 120 (47¼") 1324 130 (51⅛") 1333

80 (31½") 1319 90 (35⅜") 1394 100 (39⅜") 1458 120 (47¼") 1521 130 (51⅛") 1533

80 (31½") 1637 90 (35⅜") 1738 100 (39⅜") 1799 120 (47¼") 1918 130 (51⅛") 1936

80 (31½") 1319 90 (35⅜") 1394 100 (39⅜") 1458 120 (47¼") 1521 130 (51⅛") 1533


Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

208

Arc-shaped module 30° 641/11Extension leaf e.g. 80 x 155, Ri 220/Ra 300 (31½" x 61") with 4 connecting mechanisms for fixing frame legs for Ø 600 cm table configurations 1352 1553 1888 1445


Depth

Length80

(31½") (Ri 220/Ra 300)90

(35⅜") (Ri 220/Ra 310) 155 (61") 1352 – 160 (63") – 1394

155 (61") 1553 – 160 (63") – 1712

155 (61") 1888 – 160 (63") – 1957

177 (75¼") 1445 – 160 (63") – 1605



Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

209

Arc-shaped module 45° 641/11Extension leaf e.g. 80 x 153, Ri 120/Ra 200 (31½" x 60¼") with 4 connecting mechanisms for fixing frame legs for Ø 400 cm table configurations 1352 1553 1888 1445


Depth

Length80

(31½") (Ri 120/Ra 200)90

(35⅜") (Ri 120/Ra 210) 153 (60¼") 1352 – 161 (63⅜") – 1394

153 (60¼") 1553 – 161 (63⅜") – 1712

153 (60¼") 1888 – 161 (63⅜") – 1957

153 (60¼") 1445 – 161 (63⅜") – 1605



Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

210

Arc-shaped module 90° 641/11Extension leaf e.g. 80 x 177, Ri 45/Ra 125 (31½" x 69⅝") with 4 connecting mechanisms for fixing frame legs for Ø 250 cm table configurations 1390 1734 2052 1574


Depth

Length80

(31½") (Ri 45/Ra 125)90

(35⅜") (Ri 45/Ra 135) 177 (67⅜") 1390 – 177 (75¼") – 1533

177 (67⅜") 1734 – 177 (75¼") – 1924

177 (67⅜") 2052 – 177 (75¼") – 2301

177 (67⅜") 1574 – 177 (75¼") – 1764



Table top group

1 2 2 3

Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Lino

leum

€ € € € €

211

Four-wheeled trolley 646/01for five table tops 90 x 90 (35⅜" x 35⅜") and/or 90 x 180 (35⅜" x 70⅞") and fourteen square table legs 10 x 10 (3⅞" x 3⅞") 1521



60



130



130

Palette Accessories

€

212

Integrated techni-station Basic 701/00 or 701/10















Additional chargesTechni-station with mechanism that opens by pressing the top 74


Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) 120




Palette Built-in component sets

Integrated techni-station basic set consisting of: € Integrated Techni-Station Rotate set consisting of: €

213

Integrated techni-station Compact







Set price cable outlet707/2 214Aluminium coated black, Ø 85 mm (3⅜")



Additional charges



Additional charges




Integrated techni-station compact set consisting of: € Cable outlet set consisting of: €

214












Additional charges




Additional charges




Single table portal set consisting of: € Socket strips for Set Einbauklappe: €

216

System table

640/00

M2

A2

640/11 640/71 640/81

Set Mounting position A 11 A 2 A 31 M 12 M 22 M 32

Integrated techni-station Basic 701/00 | 701/10 • • • • • •

Integrated techni-station on both sides 701/60 | 701/70 • • • • • •

Single table portal Executive | Basic • • • • • •


Cable outlet set 707/1 | 707/2 | 707/3 • • • • • •

1 from 180 cm table width2 from 105 cm table depth• available


Palette Mounting positions


217

Table configurations

644/51 644/61 644/71

645/51 645/61 645/71

644/11 644/21 644/31

641/11

Set Mounting position A 2 M 2Integrated techni-station Basic 701/00 | 701/10 • •

Integrated techni-station on both sides 701/60 | 701/70 • •

Single table portal Executive | Basic • •

Integrated techni-station Compact 701/95 • •

Cable outlet set 707/1 | 707/2 | 707/3 • •

• available

Palette Mounting positions


218

18 ,6 x 640/00, 160x80

2 x 640/00, 90x804 x 640/10, 80x80

598

348

16 ,6 x 640/00, 150x80

2 x 640/11, 80x177, 90°

575

250

640 rangePaletteExample configurations System table

219

20 ,4 x 640/00, 150x150

600

150

16 ,8 x 640/11, 80x155, 30°

380

520

14 ,4 x 640/00, 150x80

3 x 640/11, 80x153, 45°

510

120

16 ,1 x 640/00, 120x2101 x 640/71, 120x1501 x 640/81, 120x150

432

600

220

12 ,4 x 641/11, 80x177, 90°

250

16 ,8 x 641/11, 80x153, 45°

400

16 ,8 x 641/11, 80x155, 30°

450

600

24 ,12 x 641/11, 80x155, 30°

600

640 rangePaletteExample configurations Table configurations

221

10 ,1 x 644/51, 90/120x1501 x 644/61, 90/120x150

300

90

120

22 ,1 x 645/51, 100/150x1601 x 645/61, 100/150x1603 x 644/71, 150x130

710 (279½")

100 (39¼")

150 (59")

14 ,1 x 644/11, 180x901 x 644/21, 180x905 x 644/31, 180x90

630

180

222

660 rangeTravisDesign: wiege

Technical details

FunctionModular column table system for creating static table configurations and standalone tables to suit pref-erences. For traditional conference and executive areas, where wide table spans, special table formats and shapes, as well as perfect inte-gration of multimedia equipment are required.

FrameCast aluminium T-shaped base, bright chrome plated or in silver satin finish, or black coated. Disc base in steel with a stainless steel covering, high-lustre polished or brushed finish.T-shaped base made of tubular steel, bright chrome plated or in sil-ver satin finish, or black coated. Col-umn optionally has a duct for the power supply. Crossbeam with five mounting grooves in extruded alu-minium profile, coated in silver satin finish, or black.End closures and pivoting mecha-nism for attachment to table col-umns in die-cast aluminium in the same colour as the crossbeam. Ta-ble top bearers in die-cast alumini-um coated to match the cross-beams in silver satin finish, or black, for attaching the table top; the ta-ble top bearers can be precisely po-sitioned within the crossbeam and include plastic devices for levelling out differences in heights when at-taching the table top. Black poly-propylene glides, optionally with felt inserts (for hard floorings). The T-shaped base has colour-matched caps in stainless steel.

Core material of table topPlywood, depending on the surface finish with straight, colour-matched plastic lipping or with straight, col-our-matched wood lipping. MDF (medium density fibreboard) only in conjunction with veneer with colour matched, chamfered wood lipping. For system elements: straight joining edge.

Table top group 1 – veneered top and bottom with laminateTable top 26 mm (1“) thick Laminate from the Wilkhahn colour and surface samples with plastic lipping, colour matched with the finish. (Only straight edges possi-ble!)

Table top group 2 – veneered top and bottomTable top thickness 26 mm (1⅜") Variation 1: beech, oak or ash veneer based on the Wilkhahn woodstain colour samples (exception: natural ash not possible with chamfered lipping) with wood lipping, as far as possi-ble in the same colour as the ve-neer. Variation 2: maple (exception: natural maple not possible with chamfered lip-ping), elm or walnut veneer, as well as Wilkhahn veneer Mocca accord-ing to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.


223

Edge profilesChamfered

Straight Bullnose double

Frame versions Table column Crossbeam and table top bearer

51 T-shaped base bright chrome plated Coated silver satin finish or black Coated silver satin finish or black53 T-shaped base coated, colour black Coated black Coated black54 T-shaped base bright chrome plated Bright chrome plated Coated silver satin finish or black60 T-shaped base coated silver satin finish Coated, silver satin finish Coated, silver satin finish

64 Disc base brushed Coated silver satin finish or black Coated silver satin finish or black72 Disc base high-lustre polished Coated silver satin finish or black Coated silver satin finish or black74 Disc base high-lustre polished Bright chrome plated Coated silver satin finish or black

Veneer typesAs a standard, the veneers are made by slip-match method.Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer.Some specific growth features possible.

Please remember that for barrel-shaped, open-centre table con-figurations and U-shaped table configurations with a bullnose double edge profile, the inside edges always have a straight profile.

StandardsThe Travis tables comply with the ANSI / BIFMA X 5.5 standard.

Further configurations on request.

224

Rectangular120 x 280, H 73 (47¼" x 110¼", H 28¾")

661/6T-shaped base, aluminium and column steel tube coated 3134 3683 3905 4180 4402

Additional chargesAluminium bright chrome-plated T-shaped base 462 462 462 462 462Steel disc base with brushed stainless steel cover 599 599 599 599 599Steel disc base with ultra polished stainless steel cover 726 726 726 726 726

Bright chrome-plated tubular steel table column 63 63 63 63 63

Barrel shape120 x 280, H 73 (47¼" x 110¼", H 28¾")

661/62T-shaped base, aluminium and column steel tube coated 3124 3629 3842 4126 4339



Travis Tables

Table top group1 2 2 2 2

Lam

inat

eSt

raig

ht e

dge

Vene

er v

aria

tion

1St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

1Ch

amfe

red

edge

Vene

er v

aria

tion

2St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

2Ch

amfe

red

edge

€ € € € €

225

Barrel shape80/120 x 360, H 73 (31½"/47¼" x 141¾", H 28¾")

662/40Table configuration for 10 – 12, Comprising 2 segments,T-shaped base, aluminium and column steel tube coated 4977 5886 6429 6606 7149



Travis Table configurations


Lam

inat

eSt

raig

ht e

dge

Vene

er v

aria

tion

1St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

1Ch

amfe

red

edge

Vene

er v

aria

tion

2St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

2Ch

amfe

red

edge

€ € € € €

226

Edge profilesChamfered

Straight Bullnose double

Frame versions Telescopic table column Crossbeams Under-frame facings

51 T-shaped base bright chrome plated

Coated silver satin finish or black

Coated silver satin finish or black


53 T-shaped base coated, colour black

Coated black Coated black Coated black

54 T-shaped base bright chrome plated

Bright chrome plated Coated silver satin finish or black


60 T-shaped base coated silver satin finish

Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish

661 rangeTravis height-adjustable

Technical details

FunctionElectrically height-adjustable tables complement the modular Travis table range.The seating height is infinitely ad-justable from a minimum of 71 cm to a standing height of 118 cm max. Pressing the button makes the switch between sitting and stan-ding at the table simple. In terms of ergonomics, changing posture at conferences and desks is advisable and this feature makes it easy.

FrameSteel, T-shaped base, bright chrome plated or in silver satin finish, or black coated. Telescopic steel table column, bright chrome plated, or in silver satin finish, or black coated; telescopic section always chrome plated. Steel crossbeam, in silver satin finish, or black coated. Under-frame facings at the front edges are the same as the table column’s sur-face finish. Black polyamide glides, optionally with felt inserts (for hard floorings). Frame electrically height adjustable from 71 to 118 cm, supply cable 300 cm, 150 cm of which has a black fabric sheath.

Core material of table topParticle board, depending on the surface finish with straight, colour-matched plastic lipping or with straight, colour-matched wood lipping. MDF (medium-density fibreboard) only in conjunction with veneer with colour-matched, chamfered wood lipping.

Table top group 1 - laminate on the top and bottomTable top 26 mm (1“) thickLaminate from the Wilkhahn colour and sur-face samples with plastic lipping, colour matched with the surface. (Only straight edges possible!)

Table top group 2 - veneer on the top and bottomTable top thickness 26 mm (1⅜")Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples (excepti-on: natural ash not possible with chamfered lipping) with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception: natural maple not possible with chamfered lipping), elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.


Veneer typesAs a standard, the veneers are made by slip-match method.Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Maple and beech veneer.Some specific growth features possible.

StandardsThe Travis tables comply with the DIN 147 technical report and DIN EN 527, as well as the GS requirements.

Please noteThe height-adjustable Travis tables (661 range) cannot be linked with one another or combined with Travis (660 range).

227

Rectangular90 x 180, H 71 – 118 (35⅜" x 70⅞", H 28" – 46½")

661/41Electrically height adjustable (71 – 118 cm (28" – 46½"))T-shaped base and table column coated 1929 2258 2588 2389 2719

Additional chargesBright, chrome-plated T-shaped base 287 287 287 287 287Bright chrome-plated telescopic table column 144 144 144 144 144

Rectangular100 x 200, H 71 – 118 (39⅜" x 78¾", H 28" – 46½")



Barrel shape80/100 x 230, H 71 – 118 (31½"/39⅜" x 90½", H 28"-46½")



Travis height-adjustable Tables


Lam

inat

eSt

raig

ht e

dge

Vene

er v

aria

tion

1St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

1Ch

amfe

red

edge

Vene

er v

aria

tion

2St

raig

ht/b

ulln

ose

doub

le

edge

Vene

er v

aria

tion

2Ch

amfe

red

edge

€ € € € €

228

Frame versions Frame

51 Bright chrome plated53 Coated black60 Coated, silver satin finish62 Clear anodized63 Black anodized

830 rangeCubisDesign: wiege, Klaus Franck, Werner Sauer

Technical details

FunctionCube-shaped armchairs and up-holstered benches with backrests, as well matching tables with wood-en tops for use in informal meeting environments, such as reception areas, lobbies and foyers.

Armchairs and upholstered benches with backrest

FrameOval aluminium hollow profile, bright chrome plated, clear or black anodized, or coated. Underside of glides in polyurethane for soft and hard floors.

Seat and backSeat, backrest and side sections are solid, cushioned beech frames. Back section with flexible upper edge. Foam composite upholstery with fibre fleece underlay.

Table

FrameOval aluminium profile, bright chrome plated, clear or black anodized, or coated. Black polyure-thane glides.

Core material of table topBirch plywood.

Table top group 1 – laminateTable top thickness 42 mm (15/8")Laminate according to Wilkhahn colour and surface finish samples. Moulded plywood edge profile, natural oiled finish.

Table top group 2 – veneerTable top thickness 42 mm (15/8")Variation 1:Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer.Variation 2:Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer.

Veneer versionAs a standard, the veneers are slip-matched onto the table top.Surfaces sealed with clear lacquer:Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca.Closed-pore: maple and beech veneer.Some specific growth features possible.

StandardsCubis armchairs and settees conform to ANSI / BIFMA X 5.4.Cubis tables conform to ANSI / BIFMA X 5.5.


229

Armchair¡ 43 ¶ 73 ¢ 69 | 74 (¡ 16⅞" ¶ 28¾" ¢ 27⅛" | 29⅛")

831/5Width 69 cm (27⅛")Frame aluminium coated 1219 1311 2011 2435

Additional chargesFrame aluminium anodized 70 70 70 70Frame aluminium bright chrome plated 183 183 183 183

Armchair¡ 43 ¶ 73 ¢ 74 | 74 (¡ 16⅞" ¶ 28¾" ¢ 29⅛" | 29⅛")

831/51Width 74 cm (29⅛")Frame aluminium coated 1264 1361 2079 2518


Upholstered bench with backrest¡ 43 ¶ 73 ¢ 124 | 74 (¡ 16⅞" ¶ 28¾" ¢ 48⅞" | 29⅛")

832/5Frame aluminium coated 1780 1924 3051 3644


Upholstered bench with backrest¡ 43 ¶ 73 ¢ 154 | 74 (¡ 16⅞" ¶ 28¾" ¢ 60⅝" | 29⅛")

833/5Frame aluminium coated 2022 2185 3597 4293


Cubis Armchairs and upholstered benches with backrests


62 63 66 6769

74 87

€ € € €

230

Square 830/1060 x 60, H 40 (23⅝" x 23⅝", H 15¾")Frame aluminium coated 729 758 816

Additional chargesFrame aluminium anodized 44 44 44Frame aluminium bright chrome plated 129 129 129

Rectangular 830/1460 x 90, H 40 (23⅝" x 35⅜", H 15¾")Frame aluminium coated 844 873 959

Additional chargesFrame aluminium anodized 44 44 44Frame aluminium bright chrome plated 129 129 129

Cubis Low tables


Lam

inat

e

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

€ € €

232

850 rangeVelasDesign: Eric Degenhardt

Technical details

FunctionLightweight and stylish lounge chair with footstool and side table for furnishing lounges, lobbies, re-ceptions, informal meeting areas and homes.

FrameFrame combines sections in die-cast aluminium, with stretcher and front legs in steel tube, bright chrome plated or coated in black or white.Frame tensioned by bracket in curved, low-profile steel coated to match the black or white coated frame or in silver satin finish in the case of a bright chrome plated frame.The standard version for carpeted floors is with glides at the front; optionally available with additional glides at the rear for hard or soft floors, on request with felt insert.

Seat and backUnitary seat and back frames in slim, flat steel tube contained with-in a 2-ply seamless cover using 3-D shaped knitting technology in high-performance polyester in red, green, dark blue, dark brown, dark grey or black. Softness enhanced with cut foam padding.

Foot stoolButt leather cover in dark brown and black, plywood core material. Die-cast aluminium frame, stool legs made of solid steel, obtainable either bright chrome plated, or coated in black or white. Standard glides for carpets, or optionally with felt inserts.

Side tableVeneer surface in natural ash, natural oak (table top group 2, variation 1) or walnut (table top group 2, variation 2), multiplex core material. Frame: steel flange, coat-ed in black or white, solid steel ta-ble legs, obtainable bright chrome plated, or coated in black or white. Standard glides for carpets, or op-tionally with felt inserts.

StandardsVelas lounge chair: DIN EN 1022

233

Lounge chair¡ 32 ¶ 81 ¢ 63 | 80 (¡ 12⅝" ¶ 31⅞" ¢ 24¾" | 31½")

850/1With cover using 3-D seamless, shaped knitting technologyFrame coated 695

Additional chargeFrame bright chrome plated 99

Stool 851/361 x 43, H 40 (24 x 16⅞", H 15¾") With butt leather coverFrame coated 411

Additional chargeFrame bright chrome plated 6

Round 853/1Ø 45, H 40 (Ø 17¾", H 15¾")Frame coated 321 345

Additional chargeFrame bright chrome plated 6 6

Velas Upholstery material41

€

Low table Table top group2 2

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2€ €

234

Frame versions 49 Coated signal white51 Bright chrome plated53 Coated black76 Chrome, matt-polished finish

860 rangeAsientaDesign: Jehs + Laub

Technical details

FunctionUpholstered chairs and benches with backrests, benches without backrests, as well as matching ta-bles for use in informal conference areas, such as for example prestig-ious lobbies, executive offices, in exclusive clubs or homes.

Upholstered chairs, upholstered benches with backrests and benches without backrests

FrameDie-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Surrounding under frame made of aluminium- extruded profile to match the legs. Black, multi-purpose glides made of plastic for all types of flooring.

Seat and backLeaf-sprung seat made of multiplex and solid wood (beech / birch). Back and side sections made of multiplex birch with flexible upper edge due to wide foam inserts that are cover-ed with an elastic fabric. The cush-ioning is made of cut foam with extra padding.

Tables

FrameDie-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Under frame made of aluminium-extruded pro-file to match the legs.

Tabletops MDF board (medium density fibre-board), 25 mm (1") or single-pane reinforced glass, 10 mm (⅜"), boards are each placed flush with the under frame.

Tabletop group 2 – veneerTabletop thickness 25 mm (1")Variation 1: Beech, oak and ash veneer according to Wilkhahn woodstain colour samples with wooden lipping, as far as possible tocolour-match the veneer.Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible.

Tabletop group 11 – glassTabletop thickness 10 mm (⅜")Single-pane reinforced glass optionally coated in opaque white or black, edges polished.

StandardsThe Asienta upholstered chairs and upholstered benches with and without backrests comply with the DIN EN 16139-L1 and ANSI / BIFMA X 5.4 standards.

235

Armchair¡ 44 ¶ 72 ¢ 70 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 27½" | 27⅛")

861/5Width 70 cm (27½")Frame coated 1644 2201 2852

Additional chargesFrame bright chrome plated 194 194 194Frame with chrome, matt-polished finish 345 345 345

Armchair¡ 44 ¶ 72 ¢ 78 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 30¾" | 27⅛")

861/6Width 78 cm (30¾")Frame coated 1763 2405 3119


Upholstered bench with backrest¡ 44 ¶ 72 ¢ 150 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 59" | 27⅛")

862/52-seaterFrame coated 2388 3156 4176


Upholstered bench with backrest¡ 44 ¶ 72 ¢ 218 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 85⅞" | 27⅛")



Asienta Armchairs and upholstered benches with backrests

Upholstery material

60 66 67

74 87

€ € €

236

Bench¶ 44 ¢ 144 | 69 (¶ 17⅜" ¢ 56¾" | 27⅛")



Bench¶ 44 ¢ 215 | 69 (¶ 17⅜" ¢ 84⅝" | 27⅛")



Asienta Benches

Upholstery material

60 66 67

74 87

€ € €

237

Square 860/165 x 65, H40Frame coated 1309 1359 1145


Rectangular 860/2120 x 60, H 40Frame coated 1418 1462 1363


Square 860/3120 x 120, H 40Frame coated 1637 1725 1855


Asienta Low tables

Table top group

2 2 11

Vene

er v

aria

tion

1

Vene

er v

aria

tion

2

Gla

ss

€ € €

238

Upholstered bench with backrest/lounger¡ 42 ¶ 85 ¢ 200 | 78/90 (¡ 16½" ¶ 33½" ¢ 78¾" | 30¾"/35⅜")

890/6Armrests and backrests beech veneer 3705 4663 5241

Additional chargeMaple or walnut veneer

305 305 305

890 rangeCanaDesign: wiege, Fritz Frenkler, Justus Kolberg

Technical details

Cana Upholstery material60 67

74 87

€ € €

FunctionVersatile uphostered bench with backrest, which may be used as a two seater (with armrests folded down), as a three seater (with arm-rests folded up) or as a lounger (with seat pulled out). For use in in-formal meeting environments, such as receptions, foyers, lobbies, single offices or homes. Folded down, armrests may be used as side ta-bles.

FrameSteel tube, backrest frame and hinges in aluminium, coated, silver satin finish. Black, adjustable poly-amide glides for soft and hard floors.

SeatSolid beech frame, lacquered in black, with elasticated membrane. Seat can be pulled out from 78 cm (30¾") to 90 cm (35⅜").Cushioning with wool fleece overlay.

Armrests and backrestsMaple, beech or walnut veneered laminboard with concealed solid beech lipping, natural finish.Cushioning with wool fleece overlay.Armrests fold up.


240

Quickship

QuickshipThere are cases where short deliv-ery periods are very important to the customer. Which is why Wilkhahn produced an express de-livery programme called Quickship to deliver to their customers within eight working days after receipt of order. The Quickship models are pre- produced and are therefore only available in the designs and quantity specified. For project busi-ness, the Quickship Project pro-gramme provides models available in quantities of 20 maximum and the standard Quickship pro-gramme offers a maximum of five task and visitor chairs.

241

ON® Task chair¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")

55174/7 763With seat cushion, With 3-D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated black swing plates

ON® Task chair¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")

55174/8 841like 174/7, but with seat-depth adjustment (approx. 400 to 450 mm) With seat cushion, With 3-D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlPlastic star base, aluminium-coated black swing plates

ON® Task chair¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")

55175/71 2717Seat and back with management grade upholstery, with upholstered, leather-covered 3D armrests, Upholstery material leather 74/99, Headrest in the same material as the upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension controlBright chrome plated aluminium star base and swing plates

ON® Cantilever chair¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")

55178/7 489With seat cushion, Stackable 5-high free-standing, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Polypropylene armrestsFrame bright chrome plated

Quickship

Delivery periodUp to 20 of each model ex works within 8 working days

€

242

Neos task chair¡ 40/52 ¶ 92/104 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 36¼"/41" ¢ 26" | 25¼")

55181/71 541With 3-D armrests, Adjustment of backrest height and seat depth, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Lockable backrest, Frame polyamide, Castors hard or soft, Fabric 47/10

IN Task chair¡ 40/52 ¶ 101/113 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 39¾"/44½" ¢ 27⅛" | 26")

55184/7 614With seat cushion, Upholstery material Racer 37/99 black, with 2D armrests, armrest pads made of PP back covered with form-fit knit (Formstrick), single ply, 41/99 black, Infinitely variable height adjustment, height-adjustable lumbar support, Trimension, tension controlPlastic star base, black, swivel arms black matt coated

IN Task chair¡ 40/52 ¶ 101/113 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 39¾"/44½" ¢ 27⅛" | 26")

55184/8 719like 184/7, but with seat-depth adjustment (approx. 400 to 450 mm) With seat cushion, Upholstery material Racer 37/99 black, with 3-D armrests, armrest pads made of PP, back covered with form-fit knit (Formstrick), single ply, 41/99 black, Infinitely variable height adjustment, height-adjustable lumbar support, Trimension, tension controlPlastic star base, black, swivel arms black matt coated

Stitz¶ 65/90 ¢ 31 (¶ 25⅝"/35⅜" ¢ 12¼")

55201/2 571Seat surface leather 74/99 embossed, Frame black

Quickship


€

243

Aline¡ 44 ¶ 78 ¢ 54 | 58 (¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")

55230/1 360Multi-purpose chair, up to 15-high free-standing, Seat an backrest frame and upholstery in black, Glides, hard or soft

Aline¡ 44 ¶ 78 ¢ 59 | 58 (¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")

55230/2 400Multi-purpose chair, up to 15-high free-standing, With armrests, Seat an backrest frame and upholstery in black, Glides, hard or soft

Quickship


€

244

Sito cantilever chair¡ 42 ¶ 85 ¢ 57 | 56 (¡ 16½" ¶ 33½" ¢ 22½" | 22")

55241/3 719Medium-height backrest, With seat and back cushion, Polypropylene armrests, Frame bright chrome plated, Anti-tilt stoppers for carpet, stackable version, Fabric 54/13

Modus Compact task chair¡ 42/53 ¶ 106/117 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")

55274/7 1574High backrest, With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Frame aluminium bright chrome plated, Castors hard or soft, Fabric 69/99

Modus Executive task chair¡ 42/53 ¶ 112/123 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")

55284/81 3816High backrest, Seat and backrest with slim, leather-covered cushion, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Armrests aluminium bright chrome plated with leather pad, Frame aluminium bright chrome plated, Castors hard or soft, Leather 74/99

Quickship


€

246

Built-in component sets

The usage concept, aesthetic, innovative functionality and first-class materi-als determine the quality and the return on investment of conference furni-ture. Another important aspect is how multimedia equipment is integrated in the tables.Whether static table configurations, variable table systems, or mobile and dynamic solutions are required – the superb aesthetic and functional quali-

ty of the table ranges should also offer options for adding state-of-the-art multi-media equipment. Depending on the requirements, Wilkhahn table ranges can integrate anything that’s required for today’s technology – from cable outlets to different types of fold-out techni-stations for plug and play solutions. As a result, customised solutions are produced where the tech-nology is usually cleverly concealed and part of the table system.

247

Integrated techni-station Basic

Body in aluminium, clear anodized, end panels plastic lacquered similar to RAL 9006, modules in black plastic. Optionally with integrated rubber profile or with integrated brushed profile for cable outlet when closed. Frame surface mounted with hinged mechanism. Pre-wired, including cable. On request, with mechanism that opens by pressing the top. On request, cable harness covered with a black fabric tube. Optionally with the following configurations:

701/00 3 modules:2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾")1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long

701/10 4 modules:2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾")1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long

Integrated techni-station on both sides

Body in aluminium, clear anodized, end panels plastic lacquered similar to RAL 9006, modules in black plastic. Surface mounted frame with rotatable connectivity. Pre-wired, including cable. On request, with mechanism that opens at the touch of a button. On request, cable harness covered with a black fabric tube. Optionally with the following configurations:

701/60 3 modules:2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾")1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long



Techni-stations, single table portals and cable outletsWhen it comes to integrating connection panels to the table top there are several solutions: compact, fitted modules that are space-saving to inte-grate and ideal for round or square tables. Pop-up or fold-out techni-sta-tions with plug-and-play outlets are easy to handle, cables and adaptors also stay on the table top in this case too. The high-quality single table por-tals coordinate especially well with the table.

Even when equipment is connected, only a small strip is visible. The outlets are underneath the table, so that extra cables and chargers can be accom-modated in the horizontal cable management sets.If cables are to be inserted through the table top, outlets are available that range from simple plastic to high-quality aluminium solutions.

248

Integrated techni-station Move

Frame and lid made of plastic, similar to RAL 9006, Frame and lid made of plastic, similar to RAL 9006, with retractable power strip Clear anodized, aluminium body, modules in black plastic. With integrated mechanism that opens by pressing the top. Pre-wired, including cable. On request, cable harness covered with a black fabric tube. Optionally with the following configurations:


Integrated techni-station Compact

Matt chrome frame modules in black plastic. Pre-wired, including cable. On request, cable harness covered with a black fabric tube. Optionally with the following configurations:

701/95 3 modules:1 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾")1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long1 x USB 3.0 port

Cable outlets

707/1 +++UEBERSETZUNG+++ Cable outletBlack plastic, Ø 80 mm (3⅛")

707/2 +++UEBERSETZUNG+++ Cable outletAluminium coated black, Ø 85 mm (3⅜")

707/3 +++UEBERSETZUNG+++ Cable outletAluminium clear anodized, Ø 85 mm (3⅜")

Single table portal Executive

Portal with brushed profile the same colour and material as the table top on both sides.Aperture with real wood lipping, colour matched as far as possible with the table top.Single table portal set 300 x 150 mm, flush with table top, hinges open at an angle of 180°.

In conjunction with the socket strips there are lots of connection options.

Single table portal Basic

Aluminium installation frame with portal and brushed profileFrame applied, single table portal set 300 x 120 mm, opens at an angle of 90°.

In conjunction with the socket strips there are lots of connection options.


249

Socket strips

Socket strip made of sturdy, black plastic, to fit underneath the single table portal Executive and Basic. Depending on the table range and mounting position, can be fitted to a mount, in a cable channel or underframe. The appropriate assembly materials are included in the sets.Optionally with the following items:

708/1 Socket strip 3 Modules: 3 x power supply modules (state local standard on orders)

708/2 Socket strip 3 Modules: 2 x power supply modules (state local standard on orders).1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")

708/4 Socket strip 4 Modules: 4 x power supply modules (state local standard on orders).

708/5 Socket strip 4 Modules: 2 x power supply modules (state local standard on orders) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")

708/6 Socket strip 5 Modules: 3 x power supply modules (state local standard on orders) 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")

708/8 Input cable 3 x 1.5 mm2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛")

708/9 Extension lead

3 x 1.5 mm2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜")


250

Cable management

Options for cable management sets are just as varied. For horizontal management underneath the table, cable management sets and retractable cable baskets or channels are recommended that contain the technical components.Cables can be inserted vertically in the table legs, via external cable clips or textile sleeving.

Horizontal cable management

Cable cover for integrated techni-station basic, models 701/00 and 701/10made of aluminium sheet, affixed to the table top, coated black, with strain anchors on both sides, length 550 mm

Cable cover for integrated techni-station Rotate, models 701/60 and 701/70made of aluminium sheet, affixed to the table top, coated black, with strain anchors on both sides, length 550 mm

Cable channel for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6retractable, made of aluminium extruded profile, coated black with strain anchor and insertion plates to integrate the socket strip, length 540 mm

Cable basket for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6curved, perforated metal basket, retractable, black coated, to fit underneath the table top, with mount for socket strip, metal bracket, black coated

Storage mesh for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6Polyester, black, size to match table length, with mount for socket strip, metal bracket, black coated

Cable holder underneath the table top with hook and loop fastenerAnodised aluminium profile with 2 clipped-on polypropylene cable clips with hook and loop straps attached.


251

Vertical cable management sets

Cable clip for the table legmade of black glass-fibre-reinforced polyamide to accommodate the cable management on the table frame’s upright.

Textile sleeving for cablesbelonging to the techni-stations or socket strips

Vertical cable channel mod. 620/2to manage cables between the uprights in the 620 Logon range, silver satin finish or black coated

Cable outlet in the frame leg mod. 641 or 643for vertical cable management in the 640 Palette range


252

Examples of how techni-stations and single table portals and their cable management systems are integrated

Confair folding table

Integrated Techni-Station Rotate, Cable management with hook and loop fasteners, Cables covered with textile sleeving

Integrated Techni-Station Rotate set, with cable management cover and cable clips on the table leg

Timetable Shift Logon

Single table portal set, with cable cover cable holder with hook and loop fasteners, cable clip on the table leg

Integrated techni-station compact set, cable holder with hook and loop fasteners, vertical cable channel

Integrated Techni-Station Rotate set, with cable management cover, cable holder with hook and loop fastener and cable clips on the table leg

Palette

Integrated Techni-Station Rotate set, with cable management cover cable holder with hook and loop fastener, and cables covered with black textile sleeving

Cable outlet set, cable holder with hook and loop fastener and cable outlet on the table leg

Single table portal set with cable channel cable holder with hook and loop fastener, and cables covered with black textile sleeving


222 Occo 300 Graph 440 Confair 544 Concentra 600 Conversa 610 Timetable 612 Timetable Smart 614 Timetable Shift 620 Logon 640 Palette 660 TravisV

enee

r

Bond

ed s

urfa

ce

Solid

woo

d

HPL

sol

id c

ore

Ven

eer

varn

ishe

d

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer


E2 – 6 wood lipping symmetrically curved

E1 – 1 Bullnose double edging,

concealed lipping




concealed lipping


concealed lipping


concealed lipping


concealed lipping

E1 – 3 Straight edging, concealed lipping



E1 – 2 Bullnose double edging

with impact-resilient profile, concealed lipping









E2 – 5 Chamfered wood edging,

12 mm (1/2”)


12 mm (1/2”)


E2 – 1 Bullnose double wood edging




E5 – 1 HPL solid core, Edge chamfered,

4 mm radius



with impact-resilient profile







E1 – 4 Straight edging with impact-resilient

profile, concealed lipping









E1 – 4 Straight edging with impact-resilient profile,

concealed lipping


concealed lipping


concealed lipping


concealed lipping


4 mm (1/8”) radius

Edging matrix. Wilkhahn has more than 135 different types of wood-based table tops to choose from, available as standard and customised versions.

The edging matrix indicates which edging types can or cannot be made for a particular table range in the different surface finishes and thicknesses, or require prior clarification.

Concealed lipping is oversailing veneer Visible lipping is pre-glued lipping

Laminate• Edge always has a natural oiled finish• The edge is varnished in the same colour as the table top, concealed

lipping is only available as a customised solution

Veneer• Table top and edging nearly always stained

and varnished in the same colour

Linoleum• Edge oiled with concealed lipping

222 Occo 300 Graph 440 Confair 544 Concentra 600 Conversa 610 Timetable 612 Timetable Smart 614 Timetable Shift 620 Logon 640 Palette 660 Travis

Ven

eer

Bond

ed s

urfa

ce

Solid

woo

d

HPL

sol

id c

ore

Ven

eer

varn

ishe

d

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Bond

ed s

urfa

ce

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer

Lino

leum

Lam

inat

e

Ven

eer


E2 – 6 wood lipping symmetrically curved


concealed lipping




concealed lipping


concealed lipping


concealed lipping


concealed lipping















12 mm (1/2”)


12 mm (1/2”)






E5 – 1 HPL solid core, Edge chamfered,

4 mm radius










E1 – 4 Straight edging with impact-resilient

profile, concealed lipping










concealed lipping


concealed lipping


concealed lipping


concealed lipping


4 mm (1/8”) radius

Ex-Süd/Nord/WiA / englisch / 0037 / Liefer-E / August 2013 50730002-SR 12.2016

Delivery and Payment Conditions for International Sales1 General.1.1 These conditions form an integral part of all our offers and contracts, also in current or future business relationships. They take precedence over any conflicting contractual documents, draft agreements, or terms and conditions of the customer.1.2 All deviating provisions must be agreed upon in writing and signed by both parties in order to be valid. Notices given or declarations made with respect to individual contracts may also be sent by email.1.3 If we use terms such as DAP, FCA, FOB, CFR, or CIF for the respective order, they shall have the meaning assigned to them in the ICC INCOTERMS 2010; these provisions apply correspondingly to domestic sales.

2 Ordering.2.1 Our offers are in general non-bind-ing. A contract is not made until the order is confirmed by us. Contracts are normally conditional upon the transaction being covered by trade credit insurance or upon security, such as a bank guarantee, being provided for our claims. This applies also if we confirm an order without reservations. A contract is deemed made when the cus-tomer accepts the delivery, at the latest.2.2 Contracts (orders) are binding and cannot be changed. If change requests are made after the order has been confirmed, we may submit a new offer; in general the customer will be charged for any additional costs. The new offer is accepted when the customer accepts the delivery that is in conformity with the customer’s change requests, at the latest.2.3 By placing an order, the customer warrants that he is solvent and/or of sound financial standing. If we are in doubt, in particular if we receive an ad-verse notice from a credit insurer after the contract has been entered into, we may choose not to perform the contract or ask to be provided with adequate security or demand advance payment within 4 working days. If this period of time expires to no avail, we may rescind the contract. In the event that the customer fails to provide the contractually agreed-upon security or if he does not provide the security in full (e.g., if he makes only 50 % of the advance payment) within the periods of time agreed upon, we hereby rescind the contract. In the event that the contract is rescinded, we have the right to claim damages, in particular the cost of procuring raw materials and semi-finished products that cannot be used for another purpose.

3 Delivery; Default of Acceptance.3.1 The delivery will be carried out in accordance with the delivery condi-tions set forth in the offer or in the order confirmation.3.2 The customer will be in default of acceptance and have to pay reason-able storage costs if he fails to collect the goods or have them collected or forwarded within two weeks after notice has been given that the goods are ready for shipment. In the event of default of acceptance, we may claim damages in an amount equal to 0.5 % of the order value per week, limited to a maximum of 15 % of the order value in total; this does not exclude a larger claim for damages if we can prove that the damage actually suffered is larger. The customer may prove to us that no damage was suffered or that the damage actually suffered is smaller than the asserted claim for damages.3.3 The customer has to bear the cost of any fast freight or express delivery made at the customer’s request.

4 Quality of the Goods; Samples.4.1 The quality parameters are stipu-lated exclusively by the order confirma-tion. In general, the goods comply with the standards that apply in the European Union; if different standards are to be applied, the customer must so advise us before the contract is entered into. To the extent that reference is made to information contained in brochures when the order is placed, such information is normally to be understood as an example only.4.2 With natural materials, such as wood or leather, as well as with fabrics, surfaces and linoleum, the customer accepts that any descriptions, illustrations

or samples, in particular sample or pattern cards, can only be examples due to the natural and/or typical variations in quality.4.3 Please be advised that surfaces are subject to wear by normal use during the warranty period.4.4 If samples are provided, the customer has the same duty of care as with items provided on a loan basis. The customer may keep the samples for a maximum of two months and must return them unasked, at his own expense.

5 Delivery Period; Request for Deliv-ery.

5.1 In the event of delays that are due to force majeure, industrial action, official acts, and business interruptions through no fault of our own, the delivery period will be appropriately extended. The same applies to delays that are due to export restrictions or in the event of acts of war or terrorism in a transit country or in the country of destination. If we prove that we have chosen our supplier carefully and this supplier fails to supply us as agreed, the delivery period will also be extended for the delay so incurred if we cannot reasonably be expected to make a re-placement purchase.5.2 Our failure to meet delivery dates or delivery periods will only entitle the customer to assert remedies after a rea-sonable additional time period of at least 21 working days has expired. In the event of default due to slight negligence, our liability for damages will be limited on the merits to the additional cost of a replace-ment purchase; in terms of the amount, it will be limited to 0.5 % of the order value concerned by the default for each entire week of default, up to a maximum of 5 % of the order value concerned.5.3 We may deliver ahead of schedule and make partial deliveries unless this places the customer at an unreasonable disadvantage. If, contrary to what has been agreed upon, the customer does not collect the goods or have them collected or forwarded, we have the right after the expiry of a period of 2 weeks to invoice the customer for the goods and demand storage fees.

6 Prices.6.1 Our prices do not include freight, customs duties, taxes, and other fees (e.g., certification costs) that may be incurred; these will be charged to the customer ad-ditionally. We will invoice the customer for special packaging – e.g., if the customer requests particular lot sizes – at cost price.6.2 If it is agreed that the goods are to be delivered directly to the end user, we will charge freight plus a reasonable handling surcharge.

7 Payment.7.1 Our invoices are denominated, and have to be paid, in euros; currency risks are borne by the customer. Making deductions is not allowed. If the time allowed for payment is exceeded, we may charge 12 % interest, subject to further damage.7.2 All payments must be received such that the amount is credited to our bank account by the due date. Incoming pay-ments will be applied to the outstanding receivable that has been due longest, irrespective of the customer’s payment instructions, if any.7.3 Upon default of payment, we may combine all quantities of goods yet to be supplied in a single delivery and make such delivery contingent upon the payment of all invoices due and on an advance payment on the invoices yet to be paid. We may further demand immedi-ate payment of all receivables outstanding at the time of default, for whatever legal reasons and, in particular, under whatever contract, and terminate any agreements concerning payment in installments. Until all outstanding receivables have been paid, we have the right to retain any goods not yet supplied or other services yet to be provided.

8 Warranty for Defects.8.1 The customer must, without undue delay, carry out a thorough examination of the products supplied; for this purpose, he must examine the entire delivery. The examination must, in particular, include a visual examination of the surfaces. Any defects must be reported to us without

undue delay, but in any case within 4 working days after delivery. If an exami-nation does not occur or the defects are not reported, the customer will forfeit all his warranty claims.8.2 If we bear the transport risk in par-ticular cases, any damage in transit must be confirmed by the carrier upon delivery. If the carrier has not been instructed by us, the customer assigns any and all claims against the carrier to us and delivers to us all the documents that are required to enforce such claims; we hereby accept this assignment.8.3 Warranty claims for defects become time-barred within two years of the delivery (limitation period). The running of the limitation period will be suspended for the duration of subsequent performance (i.e., replacement delivery or repair); the customer cannot demand upon comple-tion of the subsequent performance that the limitation period start all over again.8.4 Warranty claims for defects will only exist for defects that are contained in the products manufactured by us upon delivery; this does not, however, apply to materials that have been provided to us by the customer or third parties.8.5 We will primarily carry out the sub-sequent performance – where appropri-ate, with the assistance of third parties – at the customer’s place of business, even if we are aware of the final destination of the consignment, or reduce the purchase price appropriately. We may choose at our discretion, within a reasonable period of not less than 14 days, between subsequent performance – replacement delivery or repair – and a reduction of the purchase price. If the subsequent performance repair is to be carried out at a place other than the customer’s place of business, e.g., at the place of business of the end user, we will invoice the customer for the additional costs thereby incurred.8.6 If the subsequent performance fails, the customer may rescind the contract, reduce the purchase price, or claim dam-ages. A right to rescind the contract will only exist for defects that affect 30 % of the consignment or eliminate the func-tionality of the goods supplied.8.7 The customer is not authorized to return any goods without our express approval. If complaints about defects are unjustified, we may invoice the customer for the cost of examining the defect.

9 Retention of Title.9.1 The goods remain our property until the customer has paid all claims arising from the business relationship, including future claims and, in particular, any cur-rent account balance, or until all bills of exchange and checks that were delivered in payment have been honored.9.2 Furthermore, the goods remain our property if and to the extent that we assume an obligation to third parties on behalf of the customer until such obliga-tion ceases to exist.9.3 The customer may sell the goods only in the ordinary course of business; he is not authorized to pledge the goods or transfer them by way of security. To the extent permitted by law, the following provisions apply additionally: if the goods are sold or otherwise made available to third parties, the customer hereby assigns to us all financial and other claims accru-ing to him. The customer is authorized to collect such claims; in the event of default of payment, this right will be forfeited immediately.9.4 If the value of the security provided to us exceeds our claims by more than 20 %, we will be obligated to release part of the security upon request. If the customer resells the goods, he must retain title to such. To the extent permitted by law, the following provisions apply addi-tionally: any processing and/or machining of the goods will be done on our behalf and for us, but without any obligation or liability arising from such on our part. If the goods supplied by us are mixed or combined with other items, the customer hereby assigns to us his ownership or co-ownership rights to the mixed inventory or new item in proportion to the value of our goods.9.5 The customer is obligated to take out the usual insurance for the goods or include them in any existing insurance policies and hereby assigns to us all of his rights against the insurer.9.6 The customer is obligated to notify

us immediately of any attachment of goods that are subject to this retention-of-title clause or of claims that have been assigned to us. The customer bears the cost of any intervention.9.7 If the enforcement of the above rights requires formal acts, such as the registration of the goods, under ap-plicable law, the customer is obligated to so advise us and assist us in performing these acts. Should individual provisions of this retention-of-title clause be invalid under applicable law, such provision as is permissible under applicable law and comes closest to the invalid provision shall be deemed agreed upon.

10 Designs; Protection of Designs and Models.

10.1 With designs or similar contracts, the following provisions apply: until the price has been paid in full, the customer is pro-hibited from using – e.g., copying or com-municating to the public – any designs or concepts that have been created for the customer (irrespective of whether or not they qualify as copyrightable works). We retain all ownership rights and rights of use in respect of illustrations, drawings, sketches, collections, and other records that are made available to the customer; such must be returned to us upon request.10.2 We are the sole owner of all right, title, and interest in and to any forms, samples, and technical solutions in respect of or in connection with the goods. The customer is prohibited from reproduc-ing, having reproduced, or participating in the distribution of reproduced goods, irrespective of whether we are entitled to industrial property rights and, if so, to what extent. If the customer violates this prohibition, he will be liable to pay a contractual penalty in an amount of EUR 100,000 for each willful or negligent violation; this does not affect any claims for damages to which we may be entitled. We may further exercise any rights to demand that the customer refrain from reproduction, which we may also enforce by obtaining a temporary restraining order.

11 Liability.Claims for damages by the customer which are not based on the violation of material contractual obligations, willful misconduct or gross negligence, or bodily injury are excluded to the extent permitted by law. If excluding such claims is not permissible, they shall be limited to a maximum amount of damages of EUR 2 million. The customer will be fully entitled to any claims for damages which are based on the violation of material con-tractual obligations, willful misconduct or gross negligence, or bodily injury. To the extent that the law applicable to general terms and conditions allows a further limitation of our liability, such limitation of liability shall be deemed agreed upon.

12 Miscellaneous.12.1 This agreement shall be governed by German law, with the exception of the law applicable to general terms and con-ditions. In this respect, the laws that apply in the customer’s jurisdiction shall apply.12.2 The place of performance for the delivery and payment is 31848 Bad Münder (urban district: Eimbeckhausen), Germany.12.3 The place of jurisdiction for all disputes with an amount in controversy of up to EUR 150,000 that arise directly or indirectly from the contractual relation-ship, including disputes arising from or in connection with bills of exchange or checks, is Hameln, Germany. We may also sue the debtor at the debtor’s general place of jurisdiction. Disputes with an amount in controversy of over EUR 150,000 will be finally settled by the court of arbitration at the Hamburg Chamber of Industry and Commerce in accordance with its rules of procedure, as amended from time to time, and the German Code of Civil Procedure (ZPO). There will be three arbitrators. The lan-guage of the arbitral proceedings will be English, except in disputes with customers who are based in Austria or Switzerland (in this case, the language of the arbitral proceedings will be German). The place of arbitration is Hamburg, Germany.

August 2013

Wilkhahn Wilkening + Hahne GmbH + Co. KG Company registration: Amtsgericht Hannover HRA 100144

Sole fully liable partner:Wilkhahn Einrichtungs GmbH 31844 Bad Münder Company registration: Amtsgericht Hannover HRB 100070

Management:Dr. Jochen Hahne

Administrative Board: Jörg Glaser-Gallion (Chairman)

Australia Wilkhahn Asia Pacific Head Quarters Wilkhahn Forum Sydney A2, Alexandria Industrial Estate 46 - 62 Maddox Street Alexandria NSW 2015 Tel. + 61 2 9310 3355 Fax + 61 2 9319 5655 [email protected] www.wilkhahn.com.au

Wilkhahn Forum Brisbane 2/40 Douglas Street Milton QLD 4064 Tel. + 61 7 3369 2088 Fax + 61 7 3369 3088 [email protected] www.wilkhahn.com.au

Wilkhahn Forum Melbourne Level 1, 423 Bourke Street Melbourne VIC 3000 Tel. + 61 3 9670 5570 Fax + 61 3 9670 5535 [email protected] www.wilkhahn.com.au

Belgium Wilkhahn Lange Lozanastraat 262 2018 Antwerpen Tel. + 32 3 232 93 91 Fax + 32 3 227 16 16 [email protected]

China Wilkhahn Asia Pacific Suite 7602, Building 7 No. 10 Jian Guo Zhong Road Lu Wan District Shanghai 200025 Tel. + 86 21 5466 1919 Fax + 86 21 5465 1642 [email protected] www.wilkhahn.com.au

España Wilkhahn S. A. Oficinas centrales y showroom c/ Apolonio Morales 13 – A2 28036 Madrid Telf. +34 91 515 85 80 [email protected] www.wilkhahn.es

France Wilkhahn S.à r.l. 58 rue de Paradis 75010 Paris Tél. + 33 1 44 23 76 70 Fax + 33 1 44 23 82 84 [email protected]

Great Britain Wilkhahn Ltd. Wilkhahn Forum London 45 Great Sutton Street London EC1V 0DE Tel. +44 (0) 207 324 2900 Fax +44 (0) 207 324 2901 [email protected]

Hong Kong Wilkhahn Asia Pacific Wilkhahn Forum Hong Kong Rooms 4505-7, 45 / F China Online Centre No. 333 Lockhart Road Wanchai Hong Kong Tel. + 852 2827 0800 Fax + 852 2827 0855 [email protected] www.wilkhahn.com.hk

Japan Wilkhahn Japan Co., Ltd. Wilkhahn Forum Tokyo Tokyotatemono Aoyama Building B1 3-3-5 Kitaaoyama, Minato-ku 107-0061 Tokyo Tel. + 81 (0) 3 5414 8088 Fax + 81 (0) 3 5414 8089 [email protected] www.wilkhahn.co.jp

Maroc Maroc Bureau Autoroute de Rabat - Km 9,200 Aïn Sebaâ - Casablanca 20260 Tél. +212 5 22 35 37 55 Fax +212 5 22 35 51 25 [email protected]

Nederland Wilkhahn Forum Rotterdam Van Nelle-Ontwerpfabriek Van Nelleweg 3138 3044 BC Rotterdam Tel. + 31 10 750 33 90 Fax + 31 10 750 33 91 [email protected]

Österreich Wilkhahn Handelsges.m.b.H. Wimbergergasse 12 Kundeneingang Kaiserstraße 69 1070 Wien Tel. + 43 1 894 21 68-0 Fax + 43 1 890 32 39-15 [email protected]

Schweiz Wilkhahn AG Postgasse 17 Postfach 808 3000 Bern 8 Tel. + 41 31 310 13 13 Fax + 41 31 310 13 19 [email protected] www.wilkhahn.ch

Singapore Wilkhahn Asia Pacific Wilkhahn Forum Singapore 20 Martin Road #07-03 Harbour Link Singapore 239070 Tel. + 65 622 111 86 Fax + 65 622 111 25 [email protected] www.wilkhahn.com.sg

South Africa Classic Working Life 43 Houghton Drive, Houghton Estate 2198 Johannesburg Tel. +27 (0) 11 728 9542 [email protected] www.classicwl.co.za

United Arab Emirates Wilkhahn Middle East Office Furniture L. L. C. Dubai Design District Building 6, Office 208 B P.O. Box 333250 Dubai Tel. + 971 (0) 4 456 99 55 Fax + 971 (0) 4 456 99 54 [email protected]

United States of America Wilkhahn Forum New York Wilkhahn Inc. 601 West 26th Street Suite 820 New York, NY 10001 Tel. + 1 212 229 9455 Fax + 1 212 229 4772 [email protected] www.wilkhahn.com

Wilkhahn Forum Chicago Wilkhahn Inc. Tree Studios 4 East Ohio Street, Studio 35 Chicago, IL 60611 Tel. +1 312 896 3446 Fax +1 312 762 9362 [email protected] www.wilkhahn.com

www.wilkhahn.com

WilkhahnWilkening + Hahne GmbH+Co. KGFritz-Hahne-Straße 831848 Bad MünderGermanyTel. + 49 (0) 5042 999-0Fax + 49 (0) 5042 [email protected]

5073

0002

-SR

12.2

016

WiA

/WE/

OE

engl

.

Documents

Price List 2017 - Input interiör · Price List 2017. Selling prices for ... All types of upholstery foam used are manufactured CFC-free. Key to symbols ... DIN 75200 and DIN EN 1021