Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
SEIIDENTIFICATION
SOLUTIONS
Document last modified: 05-10-2017 11:58:04
SNH(TW)M CABLE MARKERSLOW FIRE HAZARD HEAT SHRINKABLE THINWALL POLYOLEFIN 2:1
APPLICATION METHOD - SHRINK ONPRODUCT DATA
Manufactured from OSH(TW) Polyolefin, SNH(TW)M Cable Markers are for use in areas where low fire
hazrd properties are mandatory, perticulary mass-transit and underground areas. SNH(TW)M Cable Markers
will operate in the temperature range -40°C to +105°C.
Flame Retardant
Low Smoke
Zero Halogen
Self Extinguishing
Available in 6 Standard Colours
Printing to Customer Requirements
115°C Minimum Shrink Temperature
Characters can be printed in single or multi-lines of any length, from once to multiple times around
the sleeve, in horizontal, vertical or variaxial. (Combination of horizontal and vertical formats)
APPROVAL STANDARDSBS 4G198, Part 3, Type 15
DEF STAN 59-97, Type 8
LUL 1-085
BS 6746 C
International RCC Markers
BS6853 Cat. 1a
LUL 2-01001-002 (E1042A6)
EN 45545-2 R24 (HL1, HL2 & HL3)
RoHS Compliant
REACH Compliant
PROPERTY VALUE
Temperature Range
Flammability
Toxicity Index (D.Stan)
Smoke Index (D.Stan)
Oxygen (D.Stan)
Flame Temp Index (D.Stan)
Tensile Strength
Elongation At Break
Chemical Resistance
Max. Longitudinal Change, typically
-40°C to +105°C - 175°C (Short Periods)
Self extinguishing
0.938
5.6
36
355
7.0 MPa
200%
G198/DS 59-97 Fair
+0%, -5%
SEI Identification Solutions Ltd
Pysons Road Industrial Estate
Broadstairs Kent CT10 2LQ UK
+44 (0) 1843 865241
+44 (0) 1843 867180
t
f
e
©2015 SEI Identification Solutions Ltd. All rights reserved. The SEI Identification Solutions logo is a registered trademark of SEI IdentificationSolutions Limited. Other products and brand names may be trademarks of their respective owners. The information on this datasheetis believed to be correct at the time of publishing. Specifications given in this publication are subject to change without notice.
:
:
:
WWW.SEI-ID.COM CABLE IDENTIFICATION RECOGNISED WORLDWIDE
SEIIDENTIFICATION
SOLUTIONS
Colour Availability:
Black, Red, Yellow, Green, Blue, White.
Other sizes available on request
Document last modified: 05-10-2017 11:58:04
SNH(TW)M CABLE MARKERSLOW FIRE HAZARD HEAT SHRINKABLE THINWALL POLYOLEFIN 2:1
BS 4G198, Part 3, Type 15
DEF STAN 59-97, Type 8
LUL 1-085
BS 6746 C
International RCC Markers
BS6853 Cat. 1a
LUL 2-01001-002 (E1042A6)
EN 45545-2 R24 (HL1, HL2 & HL3)
RoHS Compliant
REACH Compliant
SNH(TW)M Cable Markers are usually shrink fitted using a
heatgun, oven or shrink tunnel. If possible, select an 'Expanded
I/D' large enough to achieve a good degree of recovery when
shrunk.
ADDITIONAL INFORMATION PRODUCT REFERENCE
EXPANDED ID BORE MIN. (MM)
RECOVERED ID BORE MAX. (MM)
RECOVERED WALL NOMINAL (MM)
COLOURCODE
MARKING
SNH(TW)M32
SNH(TW)M48
SNH(TW)M64
SNH(TW)M95
SNH(TW)M127
SNH(TW)M191
SNH(TW)M254
SNH(TW)M381
SNH(TW)M508
SNH(TW)M762
SNH(TW)M1016
3.2
4.8
6.4
9.5
12.7
19.1
25.4
38.1
50.8
76.2
101.6
1.6
2.4
3.2
4.8
6.4
9.5
12.7
19.1
25.4
38.1
50.8
0.51
0.51
0.64
0.64
0.64
0.76
0.89
1.02
1.14
1.27
1.40
BK=Black
RD=Red
YW=Yellow
GN=Green
BE=Blue
WE=White
NumericAlpha-NumericAlpha-CharactersInstructionsSymbolsTablesLogosSingle LineMulti LineOnce around sleeveMultiples around sleeve
SEI Identification Solutions Ltd
Pysons Road Industrial Estate
Broadstairs Kent CT10 2LQ UK
+44 (0) 1843 865241
+44 (0) 1843 867180
t
f
e
©2015 SEI Identification Solutions Ltd. All rights reserved. The SEI Identification Solutions logo is a registered trademark of SEI IdentificationSolutions Limited. Other products and brand names may be trademarks of their respective owners. The information on this datasheetis believed to be correct at the time of publishing. Specifications given in this publication are subject to change without notice.
:
:
:
BUSINESS MANAGEMENT
ACCREDITATIONS
WWW.SEI-ID.COM CABLE IDENTIFICATION RECOGNISED WORLDWIDE
Registered in England No. 412829