Product data for intelligent lighting control

Intelligent lig

hting co

ntrol

Product data for intelligent lighting control

January 2010

Intelligentlighting control20

1001

05C

WH

·

Try

k: g

rafi

sk a

rbej

de

Stenager 5 DK-6400 Sønderborg Tel: +45 7442 4726Fax: +45 7442 [email protected]

You are most welcome to contact us for helpand guidance on our products and solutions.

Contact our distributor or visit us at www.servodan.com for more information on intelligent lighting control.

The support is near...

Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | [email protected] | www.servodan.com

Type survey

Type EAN no. Description Page16-901 5703102 002587 Electronic starter 16-125 W 5316-903 5703102 003263 Electronic starter 4-22 W 53

18-092 5703102 203250 Minilux control with light sensor 918-093 5703102 203267 Minilux control with nightblock 11

36-080 5703102 203298 Minilux control - outdoor 1836-080 5703102 203298 Control - indoor 2236-092 5703102 203908 Minilux control 1336-982 5703102 203496 Power Pack 34

41-042 5703102 201270 Minilux day/night switch, 12 V 841-044 5703102 201287 Minilux day/night switch, 24 V 7

41-047 5703102 201294 Minilux day/night switch, 230 V 441-054 5703102 203588 Minilux day/night switch, 230 V 541-055 5703102 204202 Minilux day/night switch, 230 V 641-201 5703102 203366 Movement sensor 4741-227 5703102 006806 Minilux movement sensor 1441-231 5703102 203335 Minilux movement sensor 1541-232 5703102 203342 Minilux movement sensor 1641-233 5703102 203359 Minilux movement sensor 1741-262 5703102 203229 Minilux movement sensor 1941-270 5703102 203540 Movement sensor PIR 3641-271 5703102 203557 Movement sensor PIR 3741-272 5703102 203564 Movement sensor PIR 3841-274 5703102 203571 Movement sensor PIR 3941-279 5703102 204318 Movement sensor PIR 4641-300 5703102 201065 Movement sensor PIR, 230 V 4941-301 5703102 201768 Movement sensor PIR wireless 5641-302 5703102 203922 Movement sensor PIR, 230 V 5041-320 5703102 201072 Movement sensor PIR, 230 V 4941-330 5703102 201195 Movement sensor PIR, 230V 5141-340 5703102 201201 Movement sensor PIR, 24 V 4441-380 5703102 204998 Movement sensor PIR wireless 5741-400 5703102 203601 Movement sensor PIR, 230 V 4841-440 5703102 204004 Movement sensor PIR, 24 V 4041-549 5703102 204547 Movement sensor PIR, 24 V 4541-580 5703102 203991 Movement sensor wireless 58

43-161 5703102 205025 Wireless selfpow. light sensor 5543-196 5703102 203373 Minilux light sensor 1043-197 5703102 203311 Light sensor 5443-198 5703102 203595 Minilux light sensor 1243-205 5703102 005687 Sensor DT-A 4143-208 5703102 005809 Sensor PIR-A 4243-215 5703102 005700 Sensor DT-A 4143-222 5703102 005706 Sensor UL-A 4343-225 5703102 005724 Sensor DT-A 4143-997 5703102 201843 Protection cap 5243-998 5703102 201850 Protection cap 52

70-100 5703102 204851 Wireless receiver 60

74-010 5703102 002532 Dimmer - ceiling 6174-040 5703102 006561 Dimmer push button controlled 6374-210 5703102 003751 Electronic converter, 60 W 6674-212 5703102 003768 Electronic converter, 105 W 6674-213 5703102 003805 Electronic converter, 150 W 6674-214 5703102 006639 Electronic converter, 200 W 6674-224 5703102 201645 Electronic converter, 70 W 6774-227 5703102 201669 Electronic converter, 120 W 6774-230 5703102 201812 Electronic converter, flat 70 W 6874-231 5703102 203304 Electronic converter, flat 105 W 6874-290 5703102 002549 Power up dimmer 6274-360 5703102 203274 Minilux Control 20

Type EAN no. Description Page74-592 5703102 201461 4-push button, Opus 2874-593 5703102 201478 Push button, Opus 28

76-922 5703102 201737 Wireless push button 2-channel 5976-923 5703102 201744 Wireless push button 4-channel 59

77-050 5703102 204523 Luxstat control box 2977-910 5703102 205049 External IR-receiver 3077-920 5703102 204691 IR-remote 30

78-000 5703102 201348 Control, On/Off 2378-050 5703102 201355 Luxstat Control, DIN 2578-980 5703102 201775 Power Supply 3578-983 5703102 201379 Luxstat Power Pack 27

79-050 5703102 204592 Luxstat control wireless 3179-210 5703102 204844 Luxstat wireless cut-off control 3279-930 5703102 204639 Luxstat USB stick 3379-980 5703102 204660 Power supply - Control 3379-981 5703102 204745 Power supply - LED armatur 3379-990 5703102 204684 Luxstat basic software 3379-995 5703102 205063 Luxstat service software 33

Table of contentsOutdoor lighting control ....................................................................Page 3 Minilux day/night switches Stand-alone 230 V/12 V/24 V ................................................... 4-8

Control DIN 17,5 mm 230 V .................................................... 9-10

Control DIN 17,5 mm 230 V/display and built-in clock ....... 11-12

Control DIN 35 mm 230 V, with display ..................................... 13

Minilux movement sensors PIR Stand-alone sensor PIR, 230 V ............................................. 14-17

Minilux controls on/off Control 230 V DIN for 24 V movement sensors ................... 18-19

Minilux controls Dim Control 230 V DIN for 24 V movement sensors ........................ 20

Indoor lighting control .....................................................................Page 21 Movement Control On/Off Control On/Off 1 ch., DIN 35 mm, 230 V .................................. 22

Control On/Off 1-3 zones, DIN, 24 V .................................... 23-24

Luxstat control system Control DIM 1-3 zones, DIN, 24 V ........................................ 25-26

Power pack 3 ch., DIN, 230 V/24 V ........................................... 27

Push buttons for Luxstat ........................................................... 28

Control box DIM, 2 zones, 230 V .......................................... 29-30

Wireless control box DIM, 1-3 zone system ......................... 31-33

Power packs DIN 230 V/24 V, 2M with relay/4M without relay .................. 34-35

Movement sensors 24 V Sensor PIR 90° – ceiling/flush mounting ................................... 36

Sensor PIR 90° – wall/corner mounting (24 V-12 V) ............. 37-39

Sensor PIR 360° – ceiling/flush mounting ................................. 40

Sensor DT-A, PIR-A, UL-A, 360° – ceiling mounting ............ 41-43

Sensor PIR 360°/90°, built in relay – ceiling/wall .................. 44-46

Movement sensors 230 V Sensor PIR 200° – wall mounting .............................................. 47

Sensor PIR 360° – ceiling/flush mounting, IR-remote control ... 48

Sensor PIR 360° – ceiling mounting, 1 or 2 ch..................... 49-51

Parts & accesories Protection caps for movement sensors ..................................... 52

Electronic starters ...................................................................... 53

Light sensors Light sensor 24 V /0-10 V .......................................................... 54

Wireless Light sensor EnOcean ................................................. 55

Wireless transmitter EnOcean Movement sensor PIR 360°, 230 V/24 V – ceiling ................ 56-57

Movement sensor PIR 360°, battery-less – ceiling .................... 58

Push-buttons – Wall, battery-less .............................................. 59

Wireless receiver EnOcean Receiver box – Wall, 230 V ........................................................ 60

Dimmers Dimmer for built-in, 230 V ac – 1-10 V ................................. 61-63

Low voltage .......................................................................................Page 65 Electronic converters ......................................................................................................................... 66-68


The product data in this catalogue gives you thorough information about the products, their features, characteristics, dimensions and type numbers. Additional information about the products – including installation instructions – are available on www.servodan.com.

3

Outdoor lighting control

4

41-047

L

LN

41-047

N

Skala: 3:1Dato : 20-11-03Tegnet: KOE

41T047_03_R0_031120KOE_Tilslutning

lx

L

LN

41-047

N


41T047_03_R0_031120KOE_Tilslutning med ur

lx


41M047_03_R1_031120KOE_Måltegning

47 73

103



47 73

103

230 V


Product data

Minilux day/night switch230 V

• Smart design• Internal lux-setting 2–200 lux

(cannot be deactivated by unauthorised persons)

• Handles heavy loads3.000 W / 3.000 VA

• Test button for correct connection

• On mounting base• Energy saver: turns on only

when daylight is insufficient• The daylight switch can be

connected to a time switch for night-time turn-off

The Minilux day/night switch is speci-fically designed for controlling out-door lighting. The lighting turns on automatically when daylight de-creases below the preset lux level (adjustable in the range 2 – 200 lux) and turns off when the daylight switch detects daylight above the preset level.

The day/night switch has been designed so it has the ideal technical angle for detecting daylight. The light sensor is placed under the slightly upward-tilting front cover so the sen-sor points skywards.

Activating the test button under the front cover will turn on the lighting for 1 minute.

The day/night switch is easy to mount and service, as all electronic parts are placed in the front cover. This makes it easy to carry out the wiring after mounting the sensor. The entire base is used as the connection housing.

Technical dataInputSupply voltage 230 V AC ±10 % Power consumption approx. 1 W

OutputRelay contact 16 A, 230 V AC

Max load:Incandescent lamps 3.000 WFluorescent lamps (uncompensated) 3.000 VATungsten-halogen lamps (230 V AC) 3.000 WVapour lamps (high/low pressure) 1.000 WLow-pressure sodium/Mercury lamps 1.000 WActuating current max. 165 A/20 mS

PerformanceLux range 2...200 luxHysteresis approx. 50 % Time delay approx. 1 min.Protection class IP 54Cable 2 x Ø8...13Ambient temperature -50° C...+ 50° C

Light-emitting diode for indication of current light level.

ApprovalCE according to EN 60669-2-1

Lux setting

Connection

Dimensions

Combined with time switch

Test buttonPressing the button turns on the lighting for 1 minute.

Preset at factory - 35 lux Lux setting 2...200 lux

Light-emit-ting diode for indica-tion of current light level

R6

Product Type EAN no. Minilux day/night switch 41-047 5703102 201294

Order number

5

41-054

74

95

49

L

LN

41-054

N

L

LN

41-054

N

0 2 4 6 8 10 12 14 16 18 20 22 24

lx

5

300

LED on

LED off

+

+

Lux


Product data

Minilux day/night switch230 V

• Classic design• External lux-setting

5–300 lux• On mounting base• Energy saver: turns on only



The Minilux day/night switch is speci-fically designed for controlling out-door lighting.

The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level.

The LED acts as an adjustment aid, and therefore responds without any time delay. The LED is turned on when the measured lux level is lower than or equal to the scale value set-ting.

The entire base is used as the con-nection housing, which ensures a quick and easy installation.

Technical dataInputSupply voltage 230 V AC ± 10 %Power consumption 1 W

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1200 VAHalogen incandescent lamps 500 WMax. compensation capacity 140 µFMax. starting current 80 A / 20 ms

PerformanceLux range 5...300 luxProtection class IP 54Ambient temperature -25°...+45° C

ApprovalsCE according to EN 60669-2-1

R1

Function

Connection

Dimensions

Product Type EAN no. Minilux day/night swi. 41-054 5703102 203588

Order number

6

41-055

128.

5

4280.0

L

41-055

NL N

L

N

L

41-055

NL N

L2

N

L1

Lux

Time

Evening Morning

18:00 23:00 05:00 07:00

Daylight controlled

Activation, Prog. 1 and 2Time on 18:00 and 05:00Time off 23:00 and 09:00

LightOn

Off

Lux setting35 lx

20:00 09:00


Product data

Minilux day/night switch230 V with integrated radio-controlled clock

• With integrated radio- controlled clock (DCF) and seven activation programmes

• The clock function can be used without the DCF signal

• Classic design• External lux-setting

5–500 lux• Energy saver: turns on only

when daylight is insufficient• Easy to install and to

programme

The Minilux day/night switch is speci-fically designed for controlling out-door lighting.

The lighting turns on automatically when daylight decreases below the preset lux level and turns off when the daylight switch detects daylight above the preset level. During the lighting periode the switch can be programmed to turn off light when needed - for instance in the middle of the night or during weekends.

The entire base is used as the con-nection housing, which ensures a quick and easy installation.

The callsign DCF77 stands for D = Deutschland (Germany)C = Long wave signalF = Frankfurt77 = frequency: 77.5 kHz

Technical dataInputSupply voltage 230 V AC ± 10 %Power consumption <1 W

OutputRelay contact NO, µ10 ADry relay contactMax load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1200 VAHalogen incandescent lamps 2300 WEnergy saving light bulbs 58 pcs. (18 W)Max. compensation capacity 140 µFMax. starting current 80 A / 20 ms

PerformanceLux range 5-500 luxProtection class IP 54Temperature range -25°...+50° C


R0

Function

Connection

Dimensions

Product Type EAN no. Minilux day/night swi. 41-055 5703102 204202

Order number

Dry relay contact

7

41-044

41-044

1 2 3 4

lx

41-044

1 2 3 4

lx

24 V

24 V AC/DC 24 V AC/DC



47 73

103



47 73

103


Product data

Minilux day/night switch24 V AC/DC








The day/night switch has been designed so it has the ideal technical angle for detecting daylight. The light sensor is placed under the slightly upward-tilting front cover so the sen-sor points skywards.



Technical dataInputSupply voltage 24 V AC/DCPower consumption approx. 1 W

OutputRelay contact NO, µ4A, Cos ϕ =1

Max load: Incandescent lamps 80 WMinimum load > 150 mA/24 V DC

PerformanceLux range 2...200 luxHysteresis approx. 50 % Time delay approx. 1 min.Protection class IP 54Cable inputs 2 x M 20Ambient temperature -50° C...+ 50° C

Light-emitting diode for indication of current light level


Connection

Dimensions


Lux setting


Preset at factory - 35 lux Lux setting 2...200 lux



Order number

R3

8

41-042

41-042

1 2 3 4

lx

41-042

1 2 3 4

lx

12 V

12 V AC/DC 12 V AC/DC



47 73

103



47 73

103


Product data

Minilux day/night switch12 V AC/DC








The day/night switch has been de-signed so it has the ideal technical angle for detecting daylight. The light sensor is placed under the slightly upward-tilting front cover so the sen-sor points skywards.



Technical dataInputSupply voltage 12 V AC/DCPower consumption approx. 1 W

OutputRelay contact NO, µ4A, Cos ϕ =1

Max load: Incandescent lamps 40 WMinimum load > 300 mA/12 V DC

PerformanceLux range 2 – 200 luxHysteresis approx. 50 % Time delay approx. 1 min.Protection class IP 54Cable inputs 2 x M 20Ambient temperature -50° C...+ 50° C

Light-emitting diode for indication of current light level


Connection

Dimensions


Lux setting


Preset at factory - 35 lux

Lux setting 2...200 lux



Order number

R3

9

18-092

17,5

89

5 53

46

A1 3

B1 2 3

D1 3

21 3

L

N

18-092

3

35

300

150

Lux

A

B

D

A1 A3

B1 B2 B3

D1 D3

L N

Lux0-10V

Minilux Control18-092

Lux

OffLux on +10 %

(38,5 lux)

Lux on35 lux

onoff


Product data

Minilux control (day/night switch) with separate light sensor

• 17,5 mm module• Lux range 3-300 lux• For installation in distribu-

tion board or simple casing• Class I product – The sensor

lead must be installed as a high voltage installation

• LED indicating current light level

The light is switched on at the pre-set lux level (default 35 lux). The light is switched off again when the daylight exceeds the Lux on setting by 10 %.

Minilux 18-092 control switches on the light immediately after a power failure for one minute, and on startup.

The LED acts as an adjustment aid, and therefore responds without any time delay. The LED goes off when the measured lux level is lower than or equal to the pre-set lux level.

The product is class I, so the sensor lead must be installed as a high volt-age installation, max. length 100 m, 3 x 1.5 mm².

Technical dataInputSupply voltage 230 V AC ± 10 %Power consumption <1 WSignal from light sensor 0-10 V

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not comp. 1.200 VAHalogen incandescent lamps 500 WMax. compensation capacity 140 µFMax. starting peak 80 A / 20 msOutput voltage 56 V DC

PerformanceLux range 3...300 luxAdjustment range for Lux on 3...270 luxTolerance of lux range ±10 %Time delay 1 min.Protection class IP 20Insulation class Class ICable to 43-196 3 x 1,5 mm²Max cable lenght to 43-196 100 mTemperature range +5° C...+50° C


R2

Function

Connection

Dimensions

Light sensor43-196

Order numbers:

Evening Morning

TimeProdukt Type EAN nr. Minilux Control 18-092 5703102 203250Minilux light sensor 43-196 5703102 203373

Complete with light sensor(18-092 + 43-196) 18-192 5703102 203472

10


43-196

N

SENSORSENSOR

52.0

34.5

1 2 3

Ri 2 K ohm

PLCPPC

CTSBMS

Lux0-10V

0-10 V

56 V DC

A1 3

B1 2 3

D1 3

21 3

L

N

18-092

3

35

300

150

Lux

D

Lux0-10V


Product data

Technical dataInputSupply voltage 56 V DC ± 10 %

OutputOutput voltage 0-10 V

PerformanceLux range 3...300 luxProtection class IP 54Connection Screws & terminalDistance from Control Max. 100 mCable 3 x 1,5 mm²Ambient temperature -40° C...+50° C

Minilux light sensor 0-10 V foroutdoor mounting

• For connection to Minilux Control 18-092

• 56 V DC• Screw terminal connection• Protection class IP 54

Minilux light sensor 43-196 is for out-door lighting control.

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

The light sensor has a IP 54 protec-tion class.

Please note!The light sensor must be connected to a class I Minilux Control, and there-for wiring to sensor must be set up as for power current.

Placement:By placement on a wall you must make allowance for the shadow effects on the sensor. (see fig. 1)

The sensor must be placed notherly, because north is lightneutral in pro-portion to the suns daily cycle east-south-west.

Dimensions

Placement

Connection to external control system

Fig. 1

R2

Connection to Minilux 18-092

Light sensor43-196

Light sensor 43-196

Product Type EAN no.Minilux light sensor 43-196 5703102 203373Minilux Control 18-092 5703102 203250

Complete with Day/night switch(18-092 + 43-196) 18-192 5703102 203472

Order numbers

11

18-093

17,5

89

5 53

46

Test

±1hon offTime

Luxon off

Lux

18:00 23:00 06:00 08:00

on

off

Lux on35 lx

Lux off20 lx

18-093

Mode Set

Test

±1hon offTime

Luxon off

A1 3

B1 2 3

C1 2 3

D1 3

21 3

L

N

A

B

C

D

Lux0-10V



Product data

Minilux Control (day/night switch) with seperate setting of morning and evening level.Integrated clock function for night blocking.

• 17,5 mm module• Lux on 3-300 lux• Easy setting via display• For installation in distribution board or simple casing• Class I product - The sensor

lead must be installed as a high voltage installation

Minilux Control 18-093 is easy to programme via display. In the display you can set Lux on, Lux off, time and night blocking.

The light is switched on at the pre-set lux level (defaul 35 lux). In the mor-ning, the light is switched off again at the lower Lux off setting. Lux off can be set to 10-70 % of Lux on (but min. 3 lux and max. 90 lux).

Minilux Control 18-093 has an inte-grated clock function allowing the light to be switched off complete-ly during a pre-defined period. Swit-ching off the lighting for example during the night means more energy saving.

The time blocking period can be deactivated by mounting a switch between terminals øC1 and øC2.

After a power failure and on startup the light will be switched on for one minute.

The product is class I, so the sensor lead must be installed as a high volt-age installation, max. length 100 m,3 x 1.5 mm².

Technical dataInputSupply voltage 230 V AC ± 10 %Power consumption <1 WSignal from light sensor 43-198 0-10 V

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not comp. 1.200 VAHalogen incandescent lamps 500 WCompensation capacity 140 µFMax. starting peak 80 A / 20 msSupply voltage 43-198 24 V DC

PerformanceLux range 3...300 luxLux on 10...300 luxLux off 10 %...70 % of Lux on (Min. 3 lux, max. 90 lux)Tolerance of lux range ±10 %Time delay 1 min.Protection class IP 20Backup for clock > 2 hours (when the unit has been connected at least 5 minutes.)Clock stability at 20°C, per day ± 1 sInsulation class Class ITemperature range +5° C...+50° C


R2

Display

Connection

Dimensions

Light sensor43-198

Push button switch for deactivating the time blocking period.

Product Type EAN no. Minilux Control 18-093 5703102 203267Minilux sensor 43-198 5703102 203595


Order numbers

Evening Morning

Lighting Control

Night blocking

Light

Time

12

1 2 3

Ri 2 K ohm

PLCPPC

CTSBMS

Lux 0-10V

43-198

N

SENSORSENSOR

52.0

34.5

0-10 V

24 V DC


+

30 - 3000 lx300 - 30K lx600 - 60K lx3 - 300 lx

18-093

Mode Set

Test

±1hon offTime

Luxon off

A1 3

B1 2 3

C1 2 3

D1 3

21 3

Lux0-10V

36-080 Minilux Control

Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 3

Lux0-10V

Control36-080


Product data



PerformanceLux ranges: 3...300 lux, 30...3K lux 300...30K lux, 600...60K luxProtection class IP 54Connection Screw terminalsDistance from Control Max. 100 mCable: Class I Control 3 x 1,5 mm²Cable: Class II Control 0,6 mmAmbient temperature -40° C...+50° C

Minilux light sensor foroutdoor mounting

• 43-198 for connection to Minilux Control 18-093, Minilux Control 36-092 and Control 36-080

• 24 V DC• Screw terminal connection• Protection class IP 54

Minilux light sensor 43-198 is for out-door lighting control.

The light sensor has screw terminal connection, so there is no need for extra junction boxes.

The light sensor has a IP54 protection class.

Please note!If the light sensor is connected to a class I Minilux Control (18-093), the wiring to the sensor must be set up as for power current.

Placement:By placement on a wall you must make compensation for the shadow effects on the sensor. (see fig. 1)

The sensor must be placed notherly, because north is lightneutral in pro-portion to the suns daily cycle east-south-west.

Dimensions

Placement

Connection to external control system

Fig. 1R2

Connection

Light sensor43-198

Light sensor 43-198

Product Type EAN no.Minilux light sensor 43-198 5703102 203595

Order numbers

13

36-092

1 2 3

2 3

B

D D1

L

N

21 3

Lux0-10V


Test

Mode Set +

Luxrange

Luxon Test

Set -

45

35

90

546


Product data

Technical dataInputSupply voltage 230 V ± 10 % 50 HzLoad max. 40 mA (no short circuit protection)Power consumption ca. 2 WSignal from light sensor 0-10 V

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1.200 VAHalogen incandescent lamps 500 WCompensation capacity 140 µFMax. starting peak 80 A / 20 msSecondary voltage 24 V DC ±10 %Ripple max. 0,5 Vpp

PerformanceLux range 3...300 lux 30...3.000 lux / 300-30.000 luxSetting range 3...270 lux 30-2.700 lux / 300-27.000 luxTolerance of lux range ±10 %Positive hysteresis 10 %Protection class IP 20Insulation class Class IIAmbient temperature +5° C ... +50° C


R1

Minilux Control (day/night switch) with separate light sensor

• 35 mm modul• 3 lux ranges• For installation in distribution

board or simple casing• Class II product – cable to

light sensor can be installed as low-voltage

• Easy settings via display

The Minilux 36-092 Control is de-signed for fitting in boards on DIN rails.

External Light Sensor 43-198, which measures the current daylight level, is connected to 36-092

The light is switched on at the preset Lux on value (default 35 lux). In the morning the light is switched off once more when a value of Lux on + 10 % is reached.

The night switch is easy to pro-gramme via the display. Lux on can be set in the module. There is also a facility to test the installation.

The current light level can be read off from the display.

In the event of a power failure and at startup, the light is switched on for 1 minute.

The product is designed as class II – the cable to the light sensor can be installed as low-voltage.

Product Type EAN no. Minilux Control 36-092 5703102 203908Minilux light sensor 43-198 5703102 203595


Order numbers


Connection

Dimensions

Light sensor43-198

Lux

Light OffLux on +10%

(38,5 lux)

Light OnLux on35 lux

onoff

Function

Evening Morning

Time

14

-++-METER LUX TIME

41-227

122

85

95

L N

L1

N

PIR

14m 0 14m

200°

33 77

2 m

14 m73

14m 0 14m

200°

33 77

2 m

14 m73

L N

PIR

L

N

1


Product data

Technical dataInputSupply voltage 230 V AC ±10 %Power consumption < 1 W

OutputRelay contact NO, µ 10 A, 250 V, cos ϕ = 1Max load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1.200 VACompensation capacity 140 µFTungsten-halogen lamps (230 V) 2.300 WMax. starting peak 80 A/20 ms

PerformanceDetection angle 200°Detection range 3-14 m.Time delay 6 sec...12 min.Lux range from 3 LuxProtection class IP 44Sensitivity AdjustableMounting hight 2-3 mAmbient temperature -20° C...+40° C


Minilux movement sensor (230 V) type 41-227 for out-door lighting control

• Connection for 230 V• Detection angle 200°• Range 14 m• Time delay up to 12 min.• External setting of lux level,

time and sensitivity

The Minilux PIR Sensor 41-227 responds to movement and tempera-ture differences. The sensor, with its detection angle of 200°, is suitable for controlling lighting in surrounding outdoor areas.

A built-in light sensor prevents the lightning to switch on by day.

The lighting can by switched on with an indoor switch (Switches off when the adjusted time expires).

The head of the sensor can be moved slightly up and down.

Brown Blue Red

Dimensions

R3

Connection

Detection Settings

Product Type EAN no. Servolux PIR 41-227 5703102 006806

Order number

15

41-231

125

72 63

Lesssensitive

Moresensitive

14 m 14 m0

180°

2,5 m

14 m0

Lesssensitive

Moresensitive

14 m 14 m0

180°

2,5 m

14 m0

Rangein meter

14 m8 m6 m

12m 8s

LUX TIME

LN

41-231

L'RedBlue Brown

N L N

LN

41-231

L L'Blue Brown Red

LN

41-231

L'RedBlue Brown

N L N

LN

41-231

L L'Blue Brown Red


Product data

Detection range

Dimensions

Technical dataInputSupply voltage 230 V ± 10 % 50 HzPower consumption <1W

OutputRelay contact NO, µ10 AMax load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1.200 VAHalogen incandescent lamps 2.300 WCompensation capacity 140 µFMax. starting peak 80 A/20 ms

PerformanceDetection angle 180ºDetection range 0–14 meterTime delay 8 sec...30 minLux range 5...∞ luxProtection class IP 54Insulation class Class IIAmbient temperature -20° C...+45° CCable entry 2 x ø12.5 mm bushes fitted


Minilux movement sensor (230 V) type 41-231 for outdoor lighting control

• 230 V connection• Detection angle 180°• Detection range 14 meters• Time delay up to 30 mins.• Setting of lux, time and

meters below cover• Facility to block detection

range

The sensor has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level.

The lighting remains switched on as long as moving people are detected.

The sensor’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left.

Recommended installation height: 2-3 m.At 2.5 m the sensor has a range of 14 m over 180°.

A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the sensor to be switched on. The sensor will switch on inde-pendently of lux, and the light will remain on in the set time.

The sensors can be fitted directly to a wall.

The enclosed cover can be used if you wish to screen off an area from detection.

Product Type EAN no.Minilux sensor 41-231 5703102 203335

Order number

Connection

Settings

R4

16

41-23245

70

90

130

L

LN

41-232

NBrown Blue Red

L

LN

41-232

NBrown Blue Red

L

LN

41-232

NBrown Blue Red

L

LN

41-232

NBrown Blue Red

2,5 m

14 m0

14 m 14 m0

180°

31 60

90

54

+ -

12m 8s

LUX TIME

METER

+ -

12m 8s

LUX TIME

METER


Product data

Detection range

Dimensions

Technical dataInputSupply voltage 230 V ± 10% 50HzPower consumption <1W

OutputRelay contact NO, µ 10 A, 250 V, cos ϕ = 1Max load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1.200 VACompensation capacity 140 µFTungsten-halogen lamps (230 V) 2300 WMax. starting peak 80 A / 20 ms

PerformanceDetection angle 180ºDetection range 0–14 meterTime delay 8 sec...30 minLux range 5...∞ luxProtection class IP 54Insulation class Class IIAmbient temperature -20°C...+45°CCable entry 2 x ø12.5 bushes fitted


Minilux movement sensor (230 V) type 41-232 for out-door lighting control

• 230 V connection• Detection angle 180°• Detection range 14 meters• Time delay up to 30 mins.• Setting of lux, time and

meters below hidden cover• Facility for ceiling installation• Facility to block detection

range

The sensor has an integrated light sensor, which guarantees that the lighting is only switched on when detecting people in motion and the daylight level (lux level) is below the preset level.

The lighting remains switched on as long as moving people are detected.

The sensor’s integrated timer is used to set the required time delay, which ensures that the light remains on for a period after the last person has left.

Recommended installation height: 2-3 m.At 2.5 m the sensor has a range of 14 m over 180°.

A switch can be integrated if manual activation is required. The button must be activated for >4 seconds in order for the sensor to be switched on. The sensor will switch on inde-pendently of lux.

The sensors can be fitted directly to a wall. For ceiling installation, fitting 41-904 (accessory) must be used.

The sensor head can be rotated 25° (horizontally) to the right or the left.

The enclosed cover can be used if you wish to screen off an area from detection.

Product Type EAN no.Minilux PIR 41-232 5703102 203342Ceiling bracket 41-904 5703102 203885

Order numbers

Connection

Settings

R7

17

41-23345

70

90

130

2,5 m

14 m0

14 m 14 m0

180°L

LN

41-233

NBrown Blue Red

Elect.

OK

OK

18:00 23:00 06:00 08:00

+-

12m8s

LUX

TIME METER

DIM

60%20%

BLOCKING TIME ON

BLOCKING TIME OFF

CLOCK

16H8H4H2H1H30M15MTIMEADJ.

Lux


Product data

Technical dataInputSupply voltage 230 V ± 10 % 50 HzPower consumption <1W

OutputMax load:R, Incandescent lamps 40...400 WL, Inductive (Iron core transform.) 50...200 VA230 V Halogen 40...300 W

PerformanceDetection angle 180ºDetection range 0–14 meterTime delay 10 sek...30 minLux range 5...∞ luxDim 20%...60%Time clock 24 hoursClock backup approx. 4 hoursProtection class IP 54Insulation class Class IIAmbient temperature -20° C...+45° CCable entry 2 x ø12.5 bushes fitted


Note!Parallel connection NOT allowed!

R8

Dimensions Minilux movement sensorwith dim (230 V) type 41-233 for outdoor lighting control

• 230 V connection• Dim function for increased

comfort• Integrated clock function for

night blocking• Detection range 180°• Detection range 14 meters• Time delay up to 30 mins.• Setting of Dim, lux, time and

meters below hidden cover• Facility for ceiling installation• Facility to block detection

range

The sensor’s integrated light sensor measures the daylight level continu-ously. If the daylight level falls below the preset level (LUX), the sensor switches on the light. The light is switched on at the present dimmer level (DIM), and at the same time the sensor becomes sensitive to move-ment.

If the sensor registers movement, the light level increases to max. When the sensor no longer registers movement, the light remains at the max. light level for the preset time (TIME). The light is then dimmed once more.

When the integrated light sensor reg-isters that the daylight level is higher than the preset level (LUX), the sensor switches off the light. If the light is switched on to max. via PIR, the light is only switched off when the preset time (TIME) has expired.

The sensor has an integrated clock function that allows the light to be switched off (blocked) for a prede-fined period, e.g. at night. During this period the sensor will still switch on the light at max. light level if it regis-ters movement.

Detection and settings

Product Type EAN no.Minilux PIR Dim 41-233 5703102 203359Ceiling fitting 41-904 5703102 203885

Order numbers

Connection

Evening Morning

Lighting Control

Blocking

Movement

Light

OnDimOff

Luxniveau70 lux

OnOff

Time

18

36-080

45

35

90

546

Display


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 43

Lux PIR

NP

N0-10V


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4

PIR

NP

N


Product data

Dimensions

Technical dataIndgangSupply voltage 230 V ± 10 % 50 HzLoad max. 40 mA (not short circuit-proof)Power consumption approx. 2 WSignal from light sensor 0-10 V

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not comp. 1.200 VAHalogen incandescent lamps 500 WMax. compensation capacity 140 µFMax. starting peak 80 A / 20 msOutput voltage 24 V DC ± 10 % Ripple max. 0,5 Vpp

PerformanceLux range 3...270 Lux (3...300) 30...2.700 Lux (30...3.000) 300...27.000 Lux (300...30.000)Tolerance of lux range ±10 %Positive hysteresis 10 %Time delay 0-60 minProtection class IP 20Insulation class Class IIAmbient temperature +5° C ... +50° C


Connection - outdoor lighting control

Minilux control for switch-ing on and off the light automatically. Program-ming via LCD display

• 1st priority: movement sensor 2nd priority: daylight

• 230 V AC

• LCD display

• 3 lux ranges

• Test function

• Possibility of manual functions

FunctionThe lighting will only be switched on when the movement sensor is activa-ted, and only if the light sensor meas-ures insufficient daylight. The lighting will be switced off after the cut off delay of the control has elapsed.

Products for this function:36-080 + 41-262 + 41-902

Minilux 36-080 Control switches on the light immediately after a power failure for one minute, and on startup.

Possibility of manual switch off (Save switch) via push button.

In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor.

The product is also for indoor lighting control.

Sensor PIR with or without built-in light sensor is available.

Product Type EAN no. Minilux Control 36-080 5703102 203298

Order numbers

41-262 Push buttonfor switching on

Energy-saving off (optional)

Outdoor R3

19

41-262

41-902

67

52 34

109

69

56 41


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 43

Lux PIR

NP

N0-10V

21 4

PIR

NP

N

21 43

Lux PIR

NP

N0-10V

41-262

36-080


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 43

Lux PIR

NP

N0-10V

21 4

PIR

NP

N

21 43

Lux PIR

NP

N0-10V

41-262 41-272

Max 8

0 m 5 m 10 m 15 m

5 m

10 m

15 m

2,5

m

15 m

M 15 7,5 4 3 1,5V 0° 5° 10° 20°45°

41-262 / 41-272 Meter

V°

Normal

Min. Max.

41-902


Product data

Technical dataInputSupply voltage 24 V DC ±10 %Max. current load 50 mA (24 V DC)Power consump. - worst case <5 mA (24 V DC)Power consump. - standby <3 mA (24 V DC)

OutputOutput signal On/Off, NPNOutput voltage Lux 0-10 V

PerformanceDetection angle 90°Detection range 0,5...15 mLux range (41-262 only) 3...300 luxProtection class IP20Protection class with cover 41-902 IP54Cable entry 2 x Ø 5 mmCable lenght Max 200 m 2 x 2 x 0,6 mmAmbient temperatur -20° C...+50° C

Connection

Detection range

R2

Dimensions Minilux PIR movement sensor for outdoor lighting control - with built-in light sensor• 24 V DC• Sensitivity setting• Up to eight sensors on one

control• Built-in walk-test function• 90° detection range• Detection lenght up to 15

meter

Minilux PIR 41-262 is a passive infra-red sensor which react to temperature changes and movements by people (and cars).

The Minilux sensor 41-262 is used in combination with Minilux Control 36-080 for outdoor lighting control.

After connection to the power supply, PIR sensors are ready for operation after 1-2 min. (power-up time).

The built-in light sensor blocks off light-ing in the daylight hours if there is suffi-cient daylight. The lux level is set on the Minilux Control.

The sensors are supplied with brackets for ceiling and wall installation.

If you with to connect more than one movement sensor, please use type 41-272 which is the same sensor just without the built-in light sensor.41-262 Master41-272 Slave

For outdoor installation the cover 41-902 must be used.

Sensitivity setting

Parallel connection

Use only one sensor with built-in light sensor

Product Type EAN no.Minilux sensor 41-262 5703102 203229Minilux sensor 41-272 5703102 203564IP54 Cover 41-902 5703102 203458

Order numbers

41-262/272

20

74-360

70

45 90

546

P[W / VA]

300

ta [°C]

400

30 35 45 5040

Pmax Derating

350

25

Derating

230 V AC

230 V AC

B

D

1 2 3 4 5

1 2 3

B

D


Mode TestSet + Set -

on

Luxon

Offdelay Dim

off ±1hTime

21 4

Movement sensor41-262

3

Lux PIR

NP

N0-10V

Push-button

L

N

N L

B

D

1 2 3 4 5

1 2 3

B

D


Mode TestSet + Set -

on

Luxon

Offdelay Dim

off ±1hTime

L

N

N L

21 4 21 3

LuxPIR

NPN

0-10V


Product data

Technical dataInputSupply voltage 230 V AC +/–10 %Max. load max. 40 mA (not short circuit-proof)Power consumption approx. 3 WSignal from light sensor 0-10 V

OutputDimmer output:Load R, Incandescent lamps 40...400 WL, Inductive (iron core transf.) 40...400 VAC, Capacitive (electronic transf.) 40...400 VADerating in accordance with See leftOutput must not be connected in parallel and load types L and C must not be mixed

Secondary voltage 24 V DC +/– 10 %Ripple max. 0.5 Vpp

PerformanceMovement sensor 41-262/272 max. 8 unitsLux on setting range 3...270 luxLux range tolerance +/– 10 %Dim value 20...90 %Off delay 0...60 minsPositive hysteresis 10 %Protection class IP20Back-up for clock > 2 hours

once unit has been connectedfor more than 5 minutes

Insulation class Class II productClock stability at 20°C per day +/– 1 secAmbient temperature +5° C...+50° C

ApprovalsCE in accordance with EN 60669-2-1

R0

Dimension Minilux Control with Dim type 74-360 for lighting control

• For 230 V AC• Dim function for 20-90 %• Integrated clock function for

night blocking• Setting of Dim, lux and time

on control• Automatic detection of load

RL/RC• Test function• Push button for manual turn

on/off the light

Minilux Control 74-360 continuously measures daylight levels. If the day-light level is below the set lux value (Lux on), Minilux Control switches on the lighting at a set Dim level.

Movement sensorIf the connected movement sensor is activated, the light increases to maximum. When the sensor no longer detects movement, the light remains on at the maximum light level for the preset time (Off delay), after which time the light returns to its dimmed setting.

When Minilux Control detects that the daylight level is above the set lux value (Lux on), it switches off the light. If movement causes the light to come on at maximum power, the light will only go off once the set time (Off delay) has expired.

Night blockingMinilux Control has an integrated clock function that allows the light to be switched off (blocked) for a predetermined period of time, e.g. overnight. During this period, Minilux Control will turn the light on to maxi-mum level whenever the PIR detects movement.

Light sensorCan be connected separately if necessary.

Product Type EAN no.Minilux Control Dim 74-360 5703102 203274PIR sensor w/ LS. 41-262 5703102 203229PIR sensor 41-272 5703102 203564IP54 cover 41-902 5703102 203458Minilux light sensor 43-198 5703102 203595

Order numbers

230 V AC

Connection

Movement sensor 41-262

Push button (optional)

With light sensor built-in, in movement sensor

Connection


Push button (optional)

With separate light sensor

Lightsensor

21

Indoor lighting control

22

36-080

45

35

90

546

Display


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4 21 3

LuxPIR

NP

N 0-10V

41-272 43-197


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4 21 3

LuxPIR

NP

N 0-10V


Product data

Indoor R2

Connection- indoor lighting control

Dimensions

Technical dataInputSupply voltage 230 V ± 10 % 50 HzLoad max. 40 mA (not short circuit-proof)Power consumption approx. 2 WSignal from light sensor 0-10 V

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not comp. 1.200 VAHalogen incandescent lamps 500 WMax. compensation capacity 140 µFMax. starting peak 80 A / 20 msOutput voltage 24 V DC ± 10 % Ripple max. 0,5 Vpp

PerformanceLux range 3...270 Lux (3...300) 30...2.700 Lux (30...3.000) 300...27.000 Lux (300...30.000)Tolerance of lux range ±10 %Positive hysteresis 10 %Time delay 0-60 minProtection class IP 20Insulation class Class IIAmbient temperature +5° C ... +50° C


Control for switching on and off the light automati-cally. Programming via LCD display

• 1st priority: daylight2nd priority: movement sensor

• 230 V AC• LCD display• 3 lux ranges• Test function• Possibility of manual functions

FunctionThe lighting will only be switched on when the movement sensor is activa-ted, and only if the light sen-sor measures insufficient daylight. If there is sufficient daylight the sensor will switch off the lighting after 1 min., even if the controller’s cut off delay has expired.

Products for this function:36-080 + 41-272 + 43-197

The Control 36-080 switches on the light immediately after a power failure for one minute, and on startup.

You can change function from auto-matic on to manual on by placing a jumper between øC3 and øC2 and by connecting a push button.

Possibility of manual switch off (Save switch) via push button.

In test mode the lighting is switched on for 5 seconds everytime there is activity from the movement sensor.

Enclose the product you will find a calculation form, which you can use for correct setting and as documenta-tion by projects. The product is also for outdoor light-ing control.

Product Type EAN no. Control 36-080 5703102 203298

Order numbers

Safeswitch (optional)

Push buttonfor switching on (optional)

23

78-000

App.

00.01

01.01

02.01

03.01

04.01

*

*

*

*

*

*

*

*

*

*

*

**

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

Buswires

43-197

Luxstat control On/Off 78-000

PIR LUX

41-272

4545

70

70

9090

29,2

50

60

29,2

50

60

6

6

Control On/Off 78-000


Product data

* Optional

Application table

Timeswitch

Light sensor 43-197

Movement sensor

Push button switch by door

74-593

4-push but-ton switch

74-592

Energy-saving switch

Push button switch by black-

board 74-593

Control On/Off, 24 V DC, 1-3 channels

Optimal daylight control with zone-based light control -Energy saving up to 60 %

• Standard pre-programmed from factory

• 5 pre-programmedapplications

• Settings via the display • Choose 1, 2 or 3 zones• Topical light level in display

Control 78-000 is intended for indoor lighting control from one to three zones.

The controller is pre-programmed for several standard applications.

One light sensor, a 4-push button switch, movement and presence sensors can be connected to the controller. The controller automatically detects connected devicess.

A 78-983 type Power Pack can be used as a power supply (SELV) for the controller. In the Power Pack there are three relay outputs for 230 V.

Bus-wire 30 cm is enclosed controller, 78-000.

More information on www.servodan.com

Technical dataInputPower supply 24 V DC ±10 % SELV Via RJ 12-1Power consumption, act./standby 4 VA/1 VA

OutputLoad Connected via Power Pack 78-983Output signal CH1-2-3 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1

PerformanceOn delay (Lux) 0-60 sek.Off delay (Lux) 0-60 min.Off delay (PIR) 1-60 min.Hysteresis 10-80 %Protection class IP 20Ambient temperature 5° C...50° C


Dimensions

Connected via Power Pack 78-983

Application example(See more overleaf)

78-901Buswire with adapter

78-902Buswire

Produkt Type EAN nr.Control On/Off 78-000 5703102 201348Bus-wire adaptor 78-901 5703102 201638Power Pack 78-983 5703102 201379Light sensor 43-197 5703102 2033114-push button 74-592 5703102 201461Push button 74-593 5703102 201478PIR movement sensor 41-272 5703102 203564

Order numbers

R4

24

43-197


PIR LUX

41-272

43-197


LUX

74-593 43-197


41-272

PIR LUX

74-593 43-197


LUX

78-000

Servodan A/S20000 Lx

RJ12-16 polet

A

B

1 72 3 4 5 6 8 9 10 11 12

1 72 3 4 5 6 8 9 10 11 12

A

B

RJ12-26 polet

Luxstat Control On /Off

L1

L2

L3

N

ØV NV ØH NH

RJ12-16 polet

78-983 Luxstat Power Pack

D1 72 3 4 5 6 8

230V

24V 1Aµ 10A 250V

B1 72 3 4 5 6 8 9 10 11 12

B

D

ØV NV

Aut

o

I/O Aut

o

I/O

21 4 21 3

LuxPIR

NP

N 0-10V

Pin 1 2 3 4 5 6

+ -CH 1 CH 2 CH 3NPN 24V, ≥ 25mA

Max 40 mA

RJ 12

74-593 43-19774-59374-592

x 4

41-272


PIR LUX

Control On/Off 78-000Control On/Off 78-000

Control On/Off 78-000 Control On/Off 78-000

Control On/Off 78-000

R4

Application 00.01E.g. Corridors/Halls(factory setting)

• 3-zone daylight control • Automatic on/off via movement

sensor

Function description: www.servodan.com

Application 01.01E.g. Exhibition premises

• 3-zone daylight control • Manual on/off via an external time

switch


Application 02.01E.g. storeroom

• 3-zone daylight control• Manual on/off• Automatic off via movement sensor


Application 04.01E.g. Production premises

• 3-zone daylight control• Manual on/off• Automatic off via external timer

switch


Function description for factory setting Application 00.01

When the movement sensor detects activity, the 3-zone on/off daylight control is switched on. As long as there is activity, the light will now be daylight-controlled in three zones in accor-dance with set parameters.

As daylight incidence increases, the light in the premises will be switched off depending on the set levels.

The light switches off automatically after a pre-set period when the movement sensors do not detect any movement in the coverage area.

Option for manual on/off via switch.

www.servodan.com


4-push button switch 74-592

Push button switch by door 74-593

Timer switch



Light sensor 43-197




Application 03.01E.g. School premises

• 2 channel daylight control on/off, 1 channel on/off

• Manual on/off, automatic off via movement sensor

Function description:www.servodan.com Connected via Power

Pack 78-983

Push buttonat black-board74-593

Product data


25

43-197

Luxstat control DIM 78-050

Elect. Ballast /Light Dimmer1 - 10V

41-272

PIR LUX

4545

70

70

9090

29,2

50

60

29,2

50

60

6

6

App.

10.01

11.01

12.01

13.01

14.01

*

*

*

*

*

*

*

*

*

*

*

**

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

Auto

I/O

78-050

Buswires


Product data

* Optional functions

Timeswitch

Application table

Light sensor 43-197

Movement sensor

Push button switch by door

74-593

4-push but-ton switch

74-592


Push button switch by black-

board 74-593

Luxstat Control DIN24 V DC, 1-3 channels

Optimal daylight control with zone-based light control -Energy saving up to 75 %

• Standard pre-programmed from factory

• 5 pre-programmed applica-tions

• Programmed via the display• Measures the daylight auto-

matically• Input for energy saving • Choose 1, 2 or 3 zones• Topical light level in display

The Luxstat Control DIN 78-050 is intended for indoor lighting control from one to three zones with dim-ming.

The Luxstat Control DIN is pre-programmed for several standard applications.

One light sensor, a 4-push button switch and movement sensors can be connected to the Luxstat Control. The controller automatically detects con-nected devices.

The load shedding capability can reduce light level during critical periods.

A 78-983 power pack is used as the voltage supply (SELV) for the Luxstat Control DIN, and to control outputs.

Bus-wire 78-902 is delivered with control 78-050.Bus-wire 78-901 with terminal screw connections is not included.

To find out more see www.servodan.com

Technical dataInputPower supply 24 V DC ±10 % SELV Via RJ 12-1Power consumption, act./standby 6 VA/2 VA

OutputLoad Connected via Power Pack 78-983Output signal CH1-2-3 NPN 24 V, ≥ 25 mA Max 40 mA Via RJ 12-1Output signal to HF CH1-2-3: 1-10 V/50 mAOutput signal 1-10V minimum: 1-4 VOutput signal 1-10V maximum: 6-10 V

PerformanceOff delay (Lux) 0-20 min/∞Off delay (PIR) 1-60 min.Ramp time 5-60 sek.Energy saving (Loadshed) 0-10 VProtection class IP 20Ambient temperature 5° C...50° C


Input RJ12-2:Not to be used! Intended for updating software.

Dimensions

Application example(See more overleaf)

Connected via Power Pack

78-983

78-901Bus-wire with adaptor

78-902Bus-wire

Product Type EAN no.Control DIN 78-050 5703102 201355Bus-wire adaptor 78-901 5703102 201638Power Pack 78-983 5703102 201379Light sensor 43-197 5703102 203311

Order numbers

R4

26

D1 2 3 4 5 6

D

L1

L2

L3

N

N

L1

1-10V

N

L2

1-10V

N

L3

1-10V

24V 1Aµ 10A 250V

+ + +Com1 Com2 Com3

Elect. BallastLight dimmer



78-050


RJ12-16 polet

A

B

1 72 3 4 5 6 8 9 10 11 12

1 72 3 4 5 6 8 9 10 11 12

A

B

RJ12-26 polet

Luxstat Control Dim

ØV NV ØH NH ØV NV

Aut

o

I/O Aut

o

I/O

21 4 21 3

LuxPIR

NP

N 0-10V

RJ12-16 polet


D1 72 3 4 5 6 8

230V

24V 1Aµ 10A 250V

B1 72 3 4 5 6 8 9 10 11 12

B

D

43-197



41-272

PIR LUX

43-197



LUX

74-593 43-197



41-272

PIR LUX

74-593 43-197



74-59374-592

x 4

41-272

PIR LUX

74-593 43-197



LUX

Pin 1 2 3 4 5 6

+ -CH 1 CH 2 CH 3NPN 24V, ≥ 25mA

Max 40 mA

RJ 12

Application 10.01E.g. Corridors(factory setting)

• 3-zone daylight control• Automatic on/off via movement

sensor


R4

Function description for factory setting Application 10.01

The light switches on when the movement sen-sor detects activity and there is a need for light. As long as there is activity, the light will now be daylight-controlled in three zones in accor-dance with set parameters.

As daylight incidence increases, the light dims in the premises so that the set, required, mini-mum light level is obtained.

The light switches off automatically after a preset period, when the movement sensors do not detect movement in the coverage area, or when a suffi cient light level has been achieved in the room.

Option for manual on/off and dimming via switch.

www.servodan.com






Application 11.01E.g. Exhibition premises

• 3-zone daylight control• Manual on/off via an external

time switch


Application 12.01E.g. Offi ces/conference premises

• 3-zone daylight control• Manual on/off• Automatic off via movement

sensor


Application 13.01E.g. School premises

• 2-zone daylight control• Manual on/off• Manual on/off blackboard

lighting• Automatic off via movement

sensor


Application 14.01E.g. Production premises

• 3-zone daylight control• Manual on/off• Automatic off via external time

switch


4-push button switch 74-592

Push button switch by door 74-593

Timer switch



Light sensor 43-197

Push buttonat black-board74-593

Product data


27

78-983

RJ12-1


D1 72 3 4 5 6 8

230V

24V 1Aµ 10A 250V

B1 72 3 4 5 6 8 9 10 11 12B

D

RJ12-2 RJ12-3 RJ12-4

+ -

24V

DC

Ch

1

Ch

2

Ch

3

N L

L1

L2

L3

N

4545

70

70

9090

29,2

50

60

29,2

50

60

6

6


Product data

RJ12 - 1For connection of Luxstat Control 78-xxx onlyPin1 + 24V DC ±10% (SELV)Pin2 - 24V DC ±10% (SELV) (ground)Pin3 I/O Not used.Pin4 Ch1 NPN 24V, ≥ 25mAPin5 Ch2 NPN 24V, ≥ 25mAPin6 Ch3 NPN 24V, ≥ 25mA

RJ12 - 2 / RJ12 - 3 / RJ12 - 4 connections:Pin1 + 24V DC ±10% (SELV)Pin2 - 24V DC ±10% (SELV) (ground)Pin3 I/O Not used. Pin4 Ch1 (RJ12-2) NPN 24V, ≥ 25mA (Input for control)Pin4 Ch2 (RJ12-3) NPN 24V, ≥ 25mA (Input for control)Pin4 Ch3 (RJ12-4) NPN 24V, ≥ 25mA (Input for control)Pin5 Not used.Pin6 Not used.

Input Output

Power supply 230 V AC D1, D2

Output voltage 24 V DC B1, B2

CH1 B4, B1, B2 D3, D4

CH2 B5, B1, B2 D5, D6

CH3 B6, B1, B2 D7, D8

Connection

Luxstat Power Pack - power supply for Luxstat Controls

• Power supply: 230 V AC• Secondary: 24V DC ±10 %,

max. 1A• Built-in protection against

overload• For DIN rail installation

The Power Pack 78-983 is mainly used as a power supply and relay module for the Luxstat Control 78-0X0.

Connects to a Luxstat Control using an RJ12 adapter (supplied with the Luxstat Control).

The built-in protection is activated when an overload occurs. This pro-tection is reset on power down.

The power supply can be loaded with a maximum of 1 A.

An LED on the front of the unit illumi-nates when 230 V is connected.

NPN movement sensors can be con-nected directly to the Power Pack.

Technical dataInputPower supply 230 V 50 - 60 HzPower consumption, act/standby 30 W/1,2 WInput CH1-2-3 NPN 24 V, ≥ 25 mA Low level ≤ 2 V

OutputRelay contact NO, µ10 A, 250 V ACMax load CH1-2-3:Incandescent lamps 2.300 WFluorescent tubes, not comp. 1.200 VACompensation capacity 140 µFMax. starting peak 80 A / 20 msOutput voltage (SELV) 24 V DC ±10 % max. 1A

PerformanceProtection class IP 20Ambient temperature -10° C...+50° C


Dimensions

R4

Connection

Product Type EAN no. Power Pack 78-983 5703102 201379Bus-wire adapter 78-901 5703102 201638

Order numbers

28

74-592

74-593


Product data

Technical data4-push button switch for Luxstat Control 78-0XX

For flush mounting Model OPUSDimensions 66 x 66 mmProtection class IP 20Voltage 5-24 V DCPower consumption Max. 24 mW/diode @ 24 V DCCable dimension single core Ø 0,3 to 0,6 mm multi core Ø 0,4 to 0,8 mmLooping Max. two of the same dimensions

For plate mounting, mounting plate type 74-589 is used.

Technical dataPush button for Luxstat Control 78-0XX

For flush mounting Model OPUSDimensions 66 x 66 mmProtection class IP 20Voltage 5-24 V DCCable dimension Min. Ø 0,6 mm

For plate mounting, mounting plate type 74-589 is used.

Product Type EAN no.4-push button, Opus 74-592 5703102 201461Mounting plate, white 74-589 5703102 005106

Order numbers

Product Type EAN no.Push button, Opus 74-593 5703102 201478Mounting plate, white 74-589 5703102 005106

Order numbers

4-push button, Opus

Push button, Opus

R1

29

77-050

202

145

36

230V~

24V DC

ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1 ø12 ø11

ø13 +ø14 -ø15 Luxø16 PIRø17 Pushbutton 1ø18 Pushbutton 2

L’ N L’ N L NDC

+-DC

RelayOn/OffZone 2Zone 1

230V~230V~

RJ12

ExternalIR Sensor

Luxstat DIM w. IR77-050

230 V~ ±10% 50 Hz µ 10A IP20

2300 W1200 VA

+-

L NL ’ N

Zone 1 Zone 2 230V RelayOn/Off

77-050 Luxstat DIM w. IR

L ’ N

L

N

- +

Elect. ballastLight Dimmer

DC

L

N

- +

Elect. ballastLight Dimmer

DC

ø10 ø9 ø8 ø7 ø6 ø5 ø4 ø3 ø2 ø1 ø12 ø11

- + - +

230V AC

DIM 1-10 V + 230 V

DIM 1-10 V + 230 V

77-05077-910

77-920


Product data

Principle

Dimensions

Technical dataInputSupply voltage 230 V AC 50 Hz ±10 %Power consumption <1W

OutputRelay zone 1 and 2 NO, µ 10 ARelay On/Off NO, µ 10 A Load: Incandescent lamps 2300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Energy-saving lamps 58 pcs. (18W)Max. compensation capacity 140 µFMax. starting Peak 80 A/20 m sec.Secondary voltage 24 V DCMax. load 100 mA

PerformanceZone 1 + 2 DIM 1-10 V / max. 10 mAOff delay (PIR) 1-60 min.Lux rangeLight sensor 30-3000 LuxIndoor 50-1000 LuxSetpoint 50-1500 LuxProtection ClassIP 20Enclosure Class IIAmbient temp. -5° C...+50° C


Luxstat control box for 2 zone control with potential free relay, 230 V AC

• Luxstat control box for con-trolling 1-10V, potential free relay and built-in IR-receiver

• External units like sensors, push-buttons, luminaires etc. are connected directly to the Luxstat

• Easy mounting and installa-tion directy in the room – no connection to distribution boards.

The Luxstat controller, type 77-050, consists of an integrated unit contai-ning 1-10 V control, a potential-free relay and an integral IR receiver. All external units, such as motion sensors, push-buttons, light sensors and luminaires are connected directly to the Luxstat unit, which can be wall-mounted directly in the room.If the Luxstat unit is installed above a false ceiling, it can be connected to an external IR receiver, type 77-910 (optional) via an RJ12 plug so that an IR remote control, type 77-920 (optio-nal) can be used.

The Luxstat control box can be instal-led and operated using the factory settings for 2 zones and 3 applicati-ons:• Manual switch on/off via push-

button – automatic switch off via movement sensor

• Automatic switch on/off via move-ment sensor

• Class room solution with manual switch on, aut. switch off

1 og 2 push-buttons can be used optional. Using 2 push-buttons enables switching off the light in zone 1 and 2 individually.The controller also contains a poten-tial-free relay for controlling ventila-tion, CTS or similar.

All connections are made directly to the controller, which contains a 24 V DC power supply for sensors. Alle Servodan 24 V DC movement sensors can be connected to the Luxstat.

Product Type EAN no.Luxstat control box 77-050 5703102 204523External IR receiver 77-910 5703102 205049IR-remote 77-920 5703102 204691

Order number

Connection

Pot.free relay, pre-set to off delay + 10 min.

R2

PIR sensor, 24V

Light sensor43-197

Push-button

30

77-910

77-920

47

O38


Product data

R1

Technical data

Dimension Diameter Ø38 mmDepth 47 mmMounting whole in ceiling Ø32-35 mm

Cable length 100 cm

Technical data

Dimension H: 100 mm W: 55 mmRange 2-3,5 mBattery type CR 2032 3 V

External IR receiver

The IR receiver is eqipped with a RJ12-plug, which can be connected directly to the Luxstat controller, 77-050.

If the Luxstat unit is installed above a false ceiling, it can be connected to the external IR receiver in order to set the Luxstat controller.

IR remote

The IR remote for Luxstat control in order to change the factory settings, to choose between various applicati-ons, to set daylight factor, to dim light etc.

Product Type EAN no.IR remote 77-920 5703102 204691

Order number:

Product Type EAN no.External IR receiver 77-910 5703102 205049

Order number:

31

79-050

143

112 36

CLR

LRN

- ø1+ ø2

Lux ø3Cut-off ø4

PIR ø5

24 VDC

Luxstat LED Control79-050

24 VDCFreq.: 868,3 MHz / 2,4 GHzIP20

Pow

er s

upp

ly24

V D

C

Ligh

t S

enso

r

+ - Lux

Wire

d P

IR s

enso

r

+ - PIR

79-050

1-10 V 1-10 V

L’ L’

230 V 230 V

1-10 V

L’

230 V

24 V DC

24 V 24 V 24 V


Product data

Principle

Dimensions

Technical dataInputSupply voltage 24 V DCPower consumption Active 6 VA Standby 2 VA

OutputTerminal for cut-off signalLoad max. 40 mA

PerformanceReceiver EnOcean RCM 130, standard protocol 868 MHz and wireless 2.4 GHzTransmitter Wireless 2.4 GHzTransmission (free field) 50 metresLED indicator For received “learn” signalEnclosure class IP 20Insulation class Class IIAmbient temperature -5° C to +50° C

ApprovalsEnOcean approval See www.servodan.dk

Luxstat Wireless Control type 79-050

• Daylight-based lighting con-trol of up to 3 zones and with the possibility of division up to 5 areas

• Wireless communication between sensors, push- buttons and luminaires

• Wireless installation via laptop, USB-stick and user-friendly Windows software.

The Luxstat Wireless Control con-tains 5 pre-set applications and 1 user-defined application, which easily can be set via the menu in the Basic installation software.

20.1 Hall areasDaylight control in 3 zones On/Off via movement sensor

21.1 Exhibition roomDaylight control in 3 zones On/Off via wireless push-button or another wireless transmitter, i.e. clock-signal

22.1 Office/conference roomDaylight control in 3 zones Manual On/Off – Off via movement sensor

23.1 ClassroomsDaylight control in 2 zones Manual OnManual On/Off of blackboard lightOff via movement sensor

24.1 Manufacturing premisesDaylight control in 3 zonesOn/Off via wireless push-button Off via push-button or another wire-less transmitter, i.e. clock-signal

25.1 User-definedCan be set to:Daylight control in 3 zonesDivision of rooms in up to 5 areasOptional function for push-button and movement sensor

Product Type EAN no.Luxstat wireless 79-050 5703102 204592controll Luxstat wireless 79-210 5703102 204844cut-off controlLuxstat power 79-980 5703102 204660supplyLuxstat USB-stick 79-930 5703102 204639Luxstat basis 79-990 5703102 204684software

Order numbers

Connection

R0

Light sensor, wired

PIR sensor, wired

PIR sensor, wireless

Push-button, wireless

Cut-off control, wireless, for luminaires

79-210

and/or

Dim – On/Off

LED Luminaire, wireless with Servodan luminaire control

Can be used with following luminaires

• 1-colour LED

• 4-colour LED (RGB-W)

• 1-10 V-signal (1-10 V ballast)

• On/off (standard ballast)

32

79-210

143

112 36

Luxstat Cut-off Control79-210

ø4

N ø5

L’ ø6

ø1

ø2 L

ø3 N

ø7ø8

-+

1-10V

230V

AC

Out

1-10

V o

ut t

oE

lect

. bal

last

or

Ligh

t D

imm

er

L-N 230V 50Hz µ, 10A Freq.: 2,4 GHz2300W / 1200VA IP20

230V

AC

In

79-050

24 V DC

230 V 230 V 230 V

79-210 79-210 79-210

Zone 1 Zone 2 Zone 3


Product data

Principle

Dimensions

Technical dataInputSupply voltage 230 V AC 50 Hz ±10 %Power consumption <3 W

OutputRelay contact NO, µ 10 ALoad Incandescent lamps 2300 W Fluorescent tube uncompensated 1200 VA Halogen incandescent lamps 2300 W Max. compensation capacity 140 µF Energy-saving lamps 58 pcs. (18 W)Max. starting peak 80 A/20 m sec.DIM 1 - 10 V / max. 50mA

PerformanceReceiver Wireless 2.4 GHzRF range 30 metresEnclosure class IP 20Insulation class Class IIAmbient temperature -5° C to +50° C.

ApprovalsCE pursuant to EN 60669-2-1

Luxstat Wireless Cut-off Control type 79-210

• Wireless communication with Luxstat Wireless Control type 79-050

• Luminaires are connected directly til Luxstat Cut-off control

• Wireless installation via laptop, USB-stick and user-friendly Windows software.

The Luxstat Cut-off Control 79-210 is used together with the Luxstat Wireless Control (79-050) controls for indoor daylight-based lighting cntrol in 1 or more zones.

If daylight control is needed in 1 or more zones, 1 Luxstat Cut-off control is used per zone. If the room needs divided in up to 5 areas, 1 Luxstat Cut-off control is used per area.

The Luxstat Cut-off control is used for controlling luminaires equipped with ballast, 1-10 V ballast for dim or standard ballast for On/Off control. The Luxstat Cut-off control can sup-ply luminaires with 230 V and control signal 1-10 V.

If standard ballast for On/Off control is connected only the relay output on the Luxstat Cut-off control is used.If 1-10 V for dim control is used, the 230 V supply for the luminaires is dis-connected (Cut-off), when the light is dimmed to minimum.

Every Luxstat Cut-off Control can operate up to 100 luminaires (1-10 V signal).

Product Type EAN no.Luxstat wireless 79-210 5703102 204844cut-off control

Order number

Connection

R1

Dim: 1-10 VOn/off: 230 V



33

79-980

79-930

79-990/79-995

79-981


Product data

DescriptionThe Luxstat USB-stick enables you to perform installation and configuration of the components in the Luxstat wire-less lighting system on site after having installed and connected the various components - controllers, luminaires, sensors, push-buttons etc.

DescriptionThe basic installation software enables you to configure the Luxstat wireless lighting system according to a range of standard applications. With the service softwaren you can change the factory settings and adjust the• function settings for push-buttons• function settings for PIR sensor• energy-save settings – reducing the

light level with 0-100 %• comfort light settings between 0-100 %

etc.

Technical dataPower supply, 24V DC/30W

Supply voltage 230 V ~ ±10 %Output voltage Norm. 24 V DCLoad 30WTemperature cutout for transformer 125° CAmbient temperature +10° C...+40° CProtection class IP 20Dimensions Width 143 mmHeight 30 mmCable lenght 300 mm

Product Type EAN no.Power supply 79-980 5703102 204660(Controller)

Order numbers

Power Supply for Luxstat Wireless Controller

Product Type EAN no.Luxstat USB-stick 79-930 5703102 204639

Order numbers

Product Type EAN no.Luxstat basic 79-990 5703102 204684softwareLuxstat service 79-995 5703102 205063software

Order numbers

Luxstat USB-stick

Luxstat InstallationSoftware – Basic & Service

R0

Technical dataPower supply, 24V DC/60W

Supply voltage 230 V ~ ±10 %Output voltage Norm. 24 V DCLoad 60WTemperature cutout for transformer 125° CAmbient temperature +10° C...+40° CProtection class IP 20Dimensions Width 180 mmHeight 35 mmCable lenght 300 mm equipped with Wieland connection, type 92.932.3053.1 on primary side (230 V)

Product Type EAN no.Power supply 79-981 5703102 204745(Luminaire)

Order numbers

Power Supply for LED Luminaires

34

36-982

45

35

90

546


Product data

Technical dataInputSupply voltage 230 V ± 10 % 50 Hz Power consumption 4 WPower loss (incl. inherent consumption) 6 W

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorescent tubes, not compensated 1.200 VAHalogen incandescent lamps 500 WCompensation capacity 140 µFMax. starting peak 165 A / 20 msSecondary voltage 24 V DC ±10 %Ripple max. 0,5 VppLoad max. 40 mA (not short circuit-proof)

PerformanceProtection class IP 20Insulation class Class IIAmbient temperature -10° C ... +50° C

36-982 NPN Terminal 3 to 2 (-)Relay ON Low level 0-2 V / max. 20 mA36-984 PNP Terminal 3 to 1 (+)Relay ON High level 20-24 V / max. 1 mA

ApprovalsCE pursuant to EN 60669-2-1

Cable dimension:4 x 0,75 max. 100 m 2 x 2 x ø 1,0 mm max. 100 m2 x 2 x ø 0,8 mm max. 50 m2 x 2 x ø 0,6 mm max. 25 m2 x 2 x ø 0,4 mm max. 15 m

Connection

R0

Product Type EAN no.Power Pack NPN 36-982 5703102 203496Power Pack PNP 36-984 5703102 203519

Dimensions Power Pack with built-in relay

• For 230 V AC• 24 V DC secondary voltage• For DIN rails• NPN input

Power Pack 36-982/36-984 is designed for fitting in boards on DIN rails.

Power Pack is a stabilised direct current supply with an in-built relay function.

Power Pack is designed to be con-nected to sensors with NPN outputs (Type 36-984 for PNP).

If constant light is required, a switch/relay can be installed.

If several 36-982 units are used, they can have their own phase.

Hint! In Fig. 2, one unit can be day-light-controlled, while the other is controlled by motion alone.

Max connection:

Type Fig. 1 Fig. 2

43-205 2 4

43-208 2 4

43-215 2 4

43-222 1 2

43-225 1 2

More...It is possible to connect up to 16 sensors by using power supply type 78-980. Please see data-sheet for 78-980.

Order numbers

36-982

µ, 10A 250V ~

24V 40mA

Power Pack

230V ~

A1 2 3

A

2 3D D

1

PIR

NP

N

L

N

Constant lighting(switch)

Fig. 1

Fig. 2

43-2XX

43-2XX 43-2XX

36-982

µ, 10A 250V ~

24V 40mA

Power Pack

230V ~

A1 2 3

A

2 3D D

1

PIR

NP

N

L

N

36-982

µ, 10A 250V ~

24V 40mA

Power Pack

230V ~

A1 2 3

A

2 3D D

1

PIR

NP

N

35

78-980

4545

70

70

9090

29,2

50

60

29,2

50

60

6

6

36-982 36-98278-980

Front


Product data

R1

Power Supply - Stand alone power supply

• Primary: 230 V AC• Secondary: 24V DC ±10 %,

max. 1A• Built-in protection against

overload• For DIN rail installation

Power Supply 78-980 is designed as a stand alone power supply.

When overloading occurs, the built-in protection operates. The protection is reset on power down.

The power supply can be loaded with a maximum of 1 A.

An LED on the front of the unit illumi-nates when 230 V is connected.

Technical dataInputPower supply 230 V 50 - 60 HzPower consumption, act/standby 30 W/1,2 W

OutputOutput voltage (SELV) 24 V DC ±10 % max. 1A

PerformanceProtection class IP 20Ambient temperature -10° C...+50° C


Dimensions

Product Type EAN no. Power Supply 78-980 5703102 201775

Connection

Combination78-980+36-982

Max. 4 sensorsconnected to 36-982

Total:Max. 16 sensorsconnected to system

Order numbers

36

41-270


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4

PIR

NP

N

21 4

PIR

NP

N

78-050 Luxstat Control DIM


RJ12-16 polet

A

B

D

1 72 3 4 5 6 8 9 10 11 12

1 72 3 4 5 6 8 9 10 11 12

1 2 3 4 5 6

A

B

D

RJ12-26 polet

41-270

36-080

41-270

78-0X0

80

80

48

1540

~3,8m / 40°

~0,5m

1m = 0,8m x 0,1m

2m = 1,5m x 0,2m

3m = 2,3m x 0,3m

4m = 3,1m x 0,4m

5m = 3,8m x 0,5m

~10m / 90°~0,5m

1m = 2m x 0,1m

2m = 4m x 0,2m

3m = 6m x 0,3m

4m = 8m x 0,4m

5m = 10m x 0,5m

41-270

21 4

41-270

21 4

PIR

NP

N

PIR

NP

N


Product data

Technical dataInputSupply voltage 24 V DC ±10 %Max. current load 50 mA (24 V DC)Power consump. - worst case <5 mA (24 V DC)Power consump. - standby <3 mA (24 V DC)

OutputOutput signal On/Off, NPN

PerformanceDetection angle 90°/40°Detection range 0,4...5 mProtection class IP20Cable lenght Max 200 m 2 x 2 x 0,6 mmAmbient temperatur -20° C...+50° C

Parallel connection

Connection

Dimensions Movement sensor PIR for indoor lighting control. For flush mounting and plate mounting.

• 24 V DC• Can be wired as for low-voltage• The front cover determines the

detection range• Mounting at the ceiling and on

the wall

Sensor PIR 41-270 is a passive infra-red movement sensor which responds to temperature changes and movements by people.

The Sensor is designed for flush mounting or mounting on a junction box (plate mounting).

If you turn the front cover 90° youget a detection range of 40°.

The bottom part can be rotated, so that it fits for mounting on the wall or at the ceiling.

After connection to the power sup-ply, the Minilux PIR Sensor is ready for operation after 1-2 min. (power-up time).

The sensor is adapted to theEuro-junction system.

Detection area

R2

Product Type EAN no.Sensor PIR 41-270 5703102 203540

Junction for:- masonry wall 54-903 5703102 001917- sheet wall 54-904 5703102 001924- plate mounting 54-905 5703102 001931Bracket for 54-905 54-906 5703102 001962

Order numbers

37

41-271

67

52 34

109

Normal

Min. Max.

M 15 7,5 4 3 1,5V 0° 5° 10° 20°45°

41-262 / 41-272 Meter

V°


Product data

Technical dataSupply voltage 12 V DC ±10 %Output signal On/Off, NPNDetection angle 90°Detection range 0,5...15 mMax. current load 50 mA (12 V DC)Power consump. - worst case <5 mA (12 V DC)Power consump. - standby <3 mA (12 V DC)Protection class IP20Ambient temperatur -20° C...+50° CCable entry 2 x Ø 5 mmCable lenght Max 200 m 2 x 2 x 0,6 mm

Connection

Dimensions Movement sensor PIR for indoor lighting control

• 12 V DC• Sensitivity setting• Built-in walk-test function• 90° detection angle• Detection range up to 15 meter

Sensor PIR 41-271 without built-in light sensor, is a universal sensor for 12 V DC. With NPN output.

The sensor PIR 41-271 is a passive infrared movement sensor which responds to temperature changes and movements by people.

The sensor PIR is supplied with brackets for ceiling and wall installa-tion.

After connection to the power supply, the sensor PIR is ready for operation after 1-2 min. (power-up time).

Sensitivity setting

R2

Product Type EAN no.Sensor PIR 12 V 41-271 5703102 203557IP54 Cover 41-902 5703102 203458

Order number:

38

41-272

67

52 34

109

Normal

Min. Max.

M 15 7,5 4 3 1,5V 0° 5° 10° 20°45°

41-262 / 41-272 Meter

V°


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4

PIR

NP

N

21 4

PIR

NP

N



RJ12-16 polet

A

B

D

1 72 3 4 5 6 8 9 10 11 12

1 72 3 4 5 6 8 9 10 11 12

1 2 3 4 5 6

A

B

D

RJ12-26 polet

41-272

36-080

41-272

78-0X0


Product data

Technical dataInputSupply voltage 41-272 24 V DC ±10%Max. current load 50 mA (24 V DC)Power consump. - worst case <5 mA (24 V DC)Power consump. - standby <3 mA (24 V DC)


PerformanceDetection angle 90°Detection range 0,5...15 mProtection class IP20Protection class with cover 41-902 IP54Cable entry 2 x Ø 5 mmCable lenght Max 200 m 2 x 2 x 0,6 mmAmbient temperatur -20°C...+50°C

Setting and placement

Connection

Dimensions Movement sensor PIR for indoor lighting control

• 24 V DC• Sensitivity setting• Up to 8 sensors on one

Control• Built-in walk-test function• 90° detection range• Detection lenght up to 15 meter

The sensor 41-272 is a passive infrared movement sensor which responds to temperature changes and movements by people.

The movement sensor PIR is used for indoor lighting control.

The movement sensor can be con-nected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux.

The movement sensor PIR is supplied with brackets for ceiling and wall installation.

After connection to the power supply, the sensor is ready for operation after 1-2 min. (power-up time).

Sensor 41-271 is 12 V DC with same specifications as 41-272.

Sensitivity setting

R2

Product Type EAN no.Sensor, 24 V 41-272 5703102 203564Sensor, 12 V 41-271 5703102 203557IP54 Cover 41-902 5703102 203458

Order numbers

39

41-274

67

52 34

109

1 5

2 4

3Normal

Min. Max.1 m.

Max 8 m.

9 m.

9 m.


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 4

PIR

NP

N

41-274

36-080


Product data

Technical dataInputSupply voltage 24 V DC ±10%)Max. current load 50 mA (24 V DC)Power cons. - worst case <5 mA (24 V DC)Power cons. - standby <3 mA (24 V DC)


PerformanceDetection angle 90°Detection range Up to 9 mProtection class IP 20Cable entry 2 x Ø 5 mmCable lenght Max 200 m 2 x 2 x 0,6 mmAmbient temperatur -20° C...+50° C

Connection

Dimensions Movement sensor PIR for indoor lighting control in high-rise warehouses

• 24 V DC• Mounting height max 8 meters• Sensitivity setting• Up to 8 sensors on one control• Built-in walk-test function• 90° detection angle• Detection range up to 9 meter

The sensor 41-274 is a passive infrared movement sensor which responds to temperature changes and movements by people.

The movement sensor PIR is used for indoor lighting control - especially in high-rise warehouses.

The movement sensor can be con-nected to Control 36-080, Luxstat Control 78-0X0 and BMS systems fx. Comlux.

The movement sensor PIR is supplied with brackets for ceiling and wall installation.

After connection to the power supply, the sensor is ready for operation after 1-2 min. (power-up time).

R1

Detection range

Sensitivity setting

Walking direction

Order numbers

1...8 sensors - op til 144 m

Max

8 m

Produkt Type EAN nr.Sensor 41-274 5703102 203571

40

3216 24

Ø90

41-440

21

41-440

3

PIR

NP

N

24V DC

Servodan Controller or similar

24V DC ±10%NPN / max. 24V / 50mA

21

41-440

3

PIR

NP

N

24V DC

Servodan Controller or similar

24V DC ±10%NPN / max. 24V / 50mA

21

41-440

3

PIR

NP

N

24V DC

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m


Product data

Movement sensor PIR 360° (24 V DC) for flush mounting

• Small design and elegant finish - only Ø90 mm

• 360° detection angle• Connected to a controller• More sensors can be

connected• 4 sensivity settings

Depending of the type of controller connected, the PIR sensor 41-440 can control the light, based on the function chosen in the controller.

The maximum number of PIR 41-440 in the same system is depending of the type of controller chosen.

Technical dataInputPower supply 24 V DC ±10 %Power consumption Worst case <5 mA (24 V DC)Standby <4 mA (24 V DC)

OutputMax current load 50 mA (24 V DC)Output signal PIR ON/OFF, NPN.

PerformanceDetection range 360°, dia. ø7-ø12 mInstallation height 2.5 - 4 mSensitivity 4 settingsProtection class IP 20Ambient temperature -5° C…+50° C


Dimension (mm)

Detection

Product Type EAN no.Sensor PIR 24 V DC 41-440 5703102 204004

Order numbers

Plan view, diameter indicated at floor height (mounted at height 2,5 m)

Diameter indicated at table height.

PlanningTo ensure optimal detection at the entrance to the room, reduce the distance between door and sensor, when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

R0

Connection: Connection:- 2 or more parallel-connected PIR sensors

41

180°/100 m²

180°/50 m²

360°/200 m²

50

76,3

115

38

1,5 3 4,5 6 7,5 90 10,5

3,5

6,50

1,5

3

4,5

6

7,5

6

4,5

3

1,5

7,5

3

4,5

6

7,5

6

4,5

3

7,51,5 3 4,5 6 7,5 90 10,5

3,5

6,50

1,5

1,5

3,56,50

1,5

3

4,5

6

7,5

6

4,5

3

1,5

7,5

1,5 3 4,5 6 7,5 99 7,5 06 4,5 3 1,5

1 2 3 4 5 6 7

CNONC

1

2

3

4

5

6

7

43-205/ 215/ 225

43-992


Product data

Red +

Grey (movement-controlled + light)

Blue (movement-controlled)

Black -

Black/white

Yellow/white

Blue/white

Movement-controlled relay e.g.ventilation/monitoring etc.

R3

Technical dataInputPower supply voltage 24 V DC ±10 %Power consumpt., 180° max. 18 mA (0,4 VA)Power consumpt., 360° max. 33 mA (0,8 VA)

OutputOutput short-circuit protectedMovement (blue) NPN, max. 50 mAMovement + light (grey) NPN, max. 50 mARelay (movement) Potential-free switch max. 24 V DC, 500 mA

PerformanceDetection angle 180°/360°Detection range 50...200 m²Time delay 8-40 min.Lux range 10-1.000 luxProtection class IP 40Installation height 2,5..3 m.Ultrasound frequency 32 KHZ, standardSensor base Ø 129 X 30 mmCable length to power supply:Cable, double stranded, Ø 0,6 max. 50 mCable, 0,75 mm² max. 100 mAmbient temperature 0° C...40° CHumidity 0-95 %

Coverage area to a height of 2.5 meters

Detection sensitivity - ultrasound

Detection sensitivity - infrared

Sensor DT-A An intelligent sensor - small movements keep the lighting on.

• Occupancy sensor• Combines the advantages of

infrared and ultrasounddetection

• For 24 V DC• Self-adjusting “Fuzzy logic”• No triggering errors• Registers small movements

down to 2 - 3 cm• Blocks in daylight• Output for movement, light

and ventilation• Detection areas 180° and

360°

The intelligent DT-A occupancy sen-sor is available in several different models. The differences lie in the area covered and in whether day-light blocking and relay output are required.

The occupancy sensors are self-adjusting, which means that they find the optimal setting for the area auto-matically.

When the two technologies (infrared and ultrasound) are combined, for example a weak infrared signal and a strong ultra sound signal will be sufficient to turn on the lighting. The sensor will thus ensure error-free trig-gering and register small movements while the lighting is turned on.

Different power supplies areavailable:78-980 230 V/24 V DC 1 A36-982 230 V/24 V DC 40 mA

Small movements Body movements

Dimensions

Type 43-205

Type 43-215

Type 43-225

Product Type EAN no.Sensor 50 m² 43-205 5703102 005687Sensor 100 m² 43-215 5703102 005700Sensor 200 m² 43-225 5703102 005724

Power pack 36-982 5703102 203496Power Supply 78-980 5703102 201775Sensor base 43-992 5703102 006189

Order numbersPLEASE NOTEThe detection area is given for an instal-lation mounted at a height of 2.5 meters in an open area without furnishings.Max installation height is 3 meters.If there are partitions in the area the ultra-sound detection area may be reduced down to 25 %.


42

43-208

50

76,3

115

38

1 2 3 4 5 6 7

CNONC

360°/40 m²23,50

1,5 3 4,5

1,5

3

4,5

04,5 3 1,5

4,5

3

1,5

43-992

1

2

3

4

5

6

7


Product data

R3

Sensor PIR-A - an intel-ligent, self-adjusting PIR (Passive infrared) sensor

• Occupancy sensor• For 24 V DC• Self-adjusting “Fuzzy Logic”• Install and forget solution!• Blocks in daylight• Detection 360° - 40 m²• Output for

- movement- movement with daylight blocking- Relay (movement)

The occupancy sensor PIR-A is an intelligent sensor based on passive infrared techno-logy.

The occupancy sensor is self-adjust-ing (adaptive) which means that after a testing period the sensor will “learn” to recognise air currents and the periods when the area is in use over a period of four weeks. Thus the sensor will only be sensitive when there is activity, and less sensitive when there are no people present.


Technical dataInputPower supply voltage 24 V DC ±10 %Power consumption max. 18 mA (0,8 VA)


PerformanceDetection angle 180°/360°Detection range 40 m²Time delay 8-40 min.Lux range 20-3.000 luxProtection class IP 40Installation height 2,5..3 m.Sensor base Ø 129 X 30 mmCable length to power supply:Cable, double stranded, Ø 0,6 max. 50 mCable, 0,75 mm² max. 100 mAmbient temperature 0° C...40° CHumidity 0-95 %

Covering area to a height of 2.5 meters



Red +



Black -

Black/white

Yellow/white

Blue/white


Connection

Dimensions

Product Type EAN no.Sensor 40 m² PIR 43-208 5703102 005809


Order numbers

NB! The detection area is given for an installation mounted at a height of 2.5 meters in an open area without furnish-ings.

Max installation height is 3 meters.

43

43-222

50

76,3

115

38

0

1,5

3

4,5

6

7,5

6

4,5

3

1,5

7,5

1,5 3 4,5 6 7,5 99 7,5 06 4,5 3 1,5

360°/200 m²

Type 43-222

1 2 3 4 5 6 7

CNONC

43-992


Product data

Red +



Black -

Black/white

Yellow/white

Blue/white


R3

Technical dataInputPower supply voltage 24 V DC ±10 %Power consumption max. 33 mA (0,8 VA)


PerformanceDetection angle 360°Detection range 200 m²Time delay 8-40 min.Lux range 10-1.000 luxProtection class IP 40Installation height 2,5..3 m.Ultrasound frequency 32 KhzSensor base Ø 129 X 30 mmCable length to power supply:Cable, double stranded, Ø 0,6 max. 50 mCable, 0,75 mm max. 100 mAmbient temperature 0° C...40° CHumidity 0-95 %

Sensor UL-AAn intelligent and self-adjusting ultrasound sensor 200 m²/360°

• Occupancy sensor• For 24 V DC• Registers small movements

down to 2 - 3 cm• No triggering errors• Install and forget solution!• Output for

- movement- movement with daylight blocking- Relay (movement)

The occupancy sensor UL-A has all-round 360° detection and detects via ultrasound. The sensor is therefore suitable for turning lighting on and off automatically in conference rooms, large teaching areas, open-plan offi-ces etc.

The occupancy sensor requires no manual adjustment after it is installed. Adjustment is carried out automati-cally in the course of a period of four weeks. After this it will be sensitive in periods of activity and less sensitive when there are no people present.


Covering area to a height of 2.5 meters



Dimensions

1

2

3

4

5

6

7

Product Type EAN no.Sensor 200 m² 43-222 5703102 005786


Order numbers

PLEASE NOTEThe detection area is given for an instal-lation mounted at a height of 2.5 meters in an open area without furnishings.

Max installation height is 3 meters.

If there are partitions in the area the ultra-sound detection area may be reduced down to 25 %.

Connection

44

41-340

41-340

PIR

1+

24V DC 0-10V

Ri

Ri > 2K

BMS / IBI

24V DC+--

lx

2 3 4 5 6--

41-340

PIR

1 2 3 4 5 6+ --

24V DC 0-10V

Ri

Ri > 2K

BMS / IBI

lx41-340

PIR

1 2 3 4 5 6+ --

24V DC 0-10V

24V DC+--

lx

127

59

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3m²

ø3,4m9m²

ø8m50m²

ø13,5m140m²

0,8m


Product data

Movement sensor PIR 360° BMS for use in intelligent systems

• 24 V DC• Potential free output relay

for movement• Time delay 1-30 min.• Lux-output 0-10 V• Lux range 30-3000 lux• 360° detection angle• 140 m² detection range• 9 m² detection range for

“small movements”

The sensor PIR 360° BMS is espe-cially suitable for use in intelligent installations like EIB, LON and CTS systems.

With a separate output for light signal 0-10 V and relay for movement signal 1-30 min. you can program the set-tings of the system yourself.

You can connect the output relay (PIR) in parallel. Use only the light sig-nal (LUX) from one sensor.

MaskTo avoid undesired lighting in particu-lar areas, the sensor must be con-strained with the enclosed mask.

Technical dataInputSupply voltage 24 V DC ± 10 %Power consumption act/pas. 0.75/0.25 W

OutputOutput relay ΙL 0.5 A, 24 V DC NO potential freeOutput for light signal 0-10 V (Source) Rj>2 KΩ

PerformanceDetection angle 360°Detection range - Small movements 9 m² Detction range - Body movements 140 m²Time delay 1-30 min.Lux range 30-3.000 luxProtection class IP 20Cover colour RAL 9010 (white)Cable max. dimension 2xØ12 mm Mounting height 2.5 - 3 mAmbient temperature -5° C…+50° CSensitivity OptionTest mode OptionLED indicator on/off (PIR) Option

Cable length: 0.05 A 0.5 A0.25 mm² 100 m 50 m0.5 mm² 200 m 100 m0.75 mm² 300 m 150 m1.0 mm² 400 m 200 m1.5 mm² 600 m 300 m

Dimensions

R4

PlanningTo ensure optimal detection at the entrance to the room, reduce the range as shown in Fig. 3 when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

Detection

Area indicated at table height.

A + B = small movementsC + D = body movements

Plan view, diameterindicated at floor level.

Parallel connection

Connection

Product Type EAN no.Sensor PIRBMS, 24 V DC 41-340 5703102 201201

Order numbers

45

22 30,6

Ø80

41-549

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m

21

41-549

3

PIR

24V AC/DC

4

24V AC/DC HVAC / CTSSystem

21

41-549

3

PIR

24V AC/DC

4 21

41-549

3

PIR

24V AC/DC

4

24V AC/DC

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m


Product data

Movement sensor PIR 360° (24 V AC/DC) with built-in relay

• 360° detection angle• Built-in time delay up to 60

min.• Small design - only Ø80 mm• Automatic switch-on and off

of lighting• 4 sensivity settings

Sensor PIR 360°, 41-549 is desig-ned for mounting on ceilings for e.g. movement control of HVAC and CTS systems or for use together with Ser-vodan controls.

The PIR Sensor is a universal move-ment sensor for 24 V AC or DC. The integrated timer can be adjusted using the DIP switch to set the time delay for the potential-free contact (reed relay).

Technical dataInputPower supply 24 V AC/DC ±10 %Power consumption Worst case <15 mA (24 V DC)Standby <4 mA (24 V DC)Worst case <20,5 mA (24 V AC)Standby <8,5 mA (24 V AC)

OutputContact (Reed relay) max. 48 V / 0,2 A (NO) potential-free

PerformanceTime delay 5 sec., 30 sec. - 60 min.Detection range 360°, dia. ø7-12 mInstallation height 2.5 - 4 mSensitivity 4 settingsProtection class IP 20Ambient temperature -5° C…+50° C


Dimension (mm)

Detection

Product Type EAN no.Sensor PIR 360° 41-549 5703102 204547

Order numbers




R0

Connection: Connection- 2 or more parallel-connected PIR sensors

46

41-279

67

52 34

109

21 4


3

PIR

24V ac/dc

41-279

41-2

7941-2

79

30s 10m

Test 30m

30s 10m

Test 30m

Time

Scale

Minmum:Test

Maximum:30 min.

21 4


3

PIR

24V ac/dc

21 4


3

PIR

24V ac/dc

24V ac/dc


Product data

Technical dataInputSupply voltage 24 V AC/DC ±10%)Power cons. - worst case <18 mA (24 V DC)Power cons. - standby <4 mA (24 V DC)

OutputKontakt (reed relæ) Max. 48V/0,2A (NO Potential free relay

PerformanceTime (2 sec.) 30 sec.-30 min.Detection angle 90°Detection range 0,5...15 mProtection class IP 20With IP54 Cover IP 54Cable entry 2 x Ø 5 mmAmbient temperatur -20°C...+50°C

CE approval acc. to EN 60669-2-1

Connection

Dimensions Movement sensor PIR for control of HVAC and CTS systems

• 24 V AC/DC• Sensitivity setting• Potential free relay for direct

connection to HVAC systems• Built-in walk-test function• 90° detection angle• Detection range up to 15 meter

Sensor PIR 41-279 is a passive infrared movement sensor which responds to temperature changes and movements by people.

The Sensor PIR 41-279 is used for ventilation control in halls, exhibiotion areas, offices and con-ference rooms.

Can be connected directly to HVACsystems for control of ventilation. The sensor can also be connected to BMS systems i.e. Comlux.

The Sensor PIR is supplied with brackets for ceiling and wall installa-tion.

After connection to the power supply, the Sensor PIR is ready for operation after 1-2 min. (power-up time).

For outdoor installation the cover41-902 must be used.

R1

Detection range

Sensitivity setting

Walking direction

Product Type EAN no.Sensor 41-279 5703102 204318IP54 Cover 41-902 5703102 203458

Order numbers

47

41-201

80

80

50

50

31 34

9m3m1m0.5m0

0.5m

2.5m

200°

0 3 9m9m 3 11

0.8

- 1.5

m

8m4m1.5m0.8m0

4 8m4 08m 1.5 1.5

200

1m

2.5m

1.8

- 2.0

m

9m3m1m0.5m0

0.5m

2.5m

200°

0 3 9m9m 3 11

0.8

- 1.5

m

8m4m1.5m0.8m0

4 8m4 08m 1.5 1.5

200

1m

2.5m

1.8

- 2.0

m Slave

5

30 100

Test

20s. 1m. 5m.15m.

30m.

Lux Meter

NL

NN L

TP41-201

NL

Master Master

P P

NN L

TP

NN L

TP

Master Slave

NL

P

NN L

TP

NN L

TP41-201

41-201 41-201

41-201

L

L L

LL

NL

NN L

TP41-201

NL

Master Master

P P

NN L

TP

NN L

TP

Master Slave

NL

P

NN L

TP

NN L

TP41-201

41-201 41-201

41-201

L

L L

LL

NL

NN L

TP41-201

NL

Master Master

P P

NN L

TP

NN L

TP

Master Slave

NL

P

NN L

TP

NN L

TP41-201

41-201 41-201

41-201

L

L L

LL


Product data

R2

Pushbutton

Movement sensor for automatic control of indoor lighting

• Connection for 230 V AC• For flush and plate mounting• Detection 200°/8-9 m• Master/slave function• Test function• Hidden settings

The movement sensor is switching on the lighting when it detects moving of persons and the lux level is lower than the preset level.

SettingsTo change the sensor’s settings, open the front cover. Here you can set the off delay (the time when the light must be switched on after last movement), lux level and sensitivity.

The movement sensor has 5 fixed settings for time: 20 sec. - 1 min. - 5 min. - 15 min. and 30 min.The movement sensor has 4 fixed settings for lux: 5/30/100 lux / inde-pendent of lux. You can also save the topical lux level, when there is the desired minimum lighting in the room.

Constant On or Off is easy to select by pushing the upper part of the sen-sor to the left or to the right.Automatic is selected by setting the upper part in neutral positon.

DetectionThe sensor is designed to be fitted to a wall at a height of 0.8 m to 2.0 m. The coverage area is up to 9 m at an installation height of up to 1.5 m, and up to 8 m at an installation height from 1.5 m to 2.0 m.

You are advised not to place the sen-sor where it is exposed to direct sun-light, airflows from air conditioning/radiators, etc.

Technical dataInputSupply voltage 230 V AC ± 10 %Power consumption 1 W

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.000 WFluorescent tubes, not comp. 1.200 VAHalogen incandescent lamps 500 WCompensation capacity 140 µFMax. starting Peak 80 A/20 mS

PerformanceDetection angle 200°Detection range 8-9 mTime delay 20 sek./1 min./ 5 min./15 min./30 min.Lux range 5...1.000 luxProtection class IP 40Installation height 0,8..2 mAmbient temperature -5° C...+45° C


Dimensions

Detection range

Installation height from 1.5 - to 2 m

Installation height from 0.8 m to 1.5 m

Connection

Connection using the master/slave principle.

Connection using the master/master prin-ciple. Lux, Meters and Time can be set separately for each sensor

Settings

Time

Push button

Push button

Product Type EAN no. Minilux sensor 41-201 5703102 203366Junction box 41-901 5703102 203441

Order numbers

Push button

Push button

48

O 90

3216 24

Ø90

41-400

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m

NN L’

41-400

T L

N

L

230V

55mm for PL-box

60m

m fo

r E

uro-

box

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m


Product data

Movement sensor PIR 360° (230 V AC) for flush mounting

• Small design and elegant finish - only Ø90 mm

• With or without automatic lux-function

• Manual switch-on and off - automatic switch off

• 360° detection angle• 4 different settings of

functions via DIP-switch

Movement sensor PIR 41-400 is a passive infrared sensor which react to temperature changes and movements by people.

The built-in light sensor blocks off light-ing in the daylight hours if there is suf-ficient daylight. The lux level is set in the sensor.

The movement sensor can be used with its factory settings, or the set-tings can be modified using theremote control – IR Remote 41-920 (accessory).

DIP-switch settings (functions):

App. 1) Daylight dependentAut. On/off via PIRManual on/off via push button

App. 2) Daylight dependentManual on/off via push buttonAut. Off via PIR

App. 3) Movement controlled onlyAut. On/off via PIRManual on/off via push button

App. 4) Movement controlled onlyManual on/off via push buttonAut. Off via PIR

Technical dataInputSupply voltage 230 V AC ±10 % 50 HzPower consumption 1 W

OutputSwitch NO, µ 10 AMax load:Incandescent lamps 2300 WFluorescent lamps 1200 VAHalogen incandescent lamps 2300 WMax. compensation capacity 140 µFMax. inrush current 80 A / 20 ms

PerformanceLux range 30…2000 LuxTime delay 5 sec., 2...30 minDetection range 360°, dia. ø7-12 mInstallation height 2.5 - 4 mSensitivity 4 settingsProtection class IP 20Ambient temperature -5° C…+50° C


Dimension (mm)

Detection

Product Type EAN no.Sensor PIR 230 V AC 41-400 5703102 203601IR remote 41-920 5703102 204028

Order numbers




R0

Connection

AccessoryIR Remote 41-920

49

127 mm

59 m

m

L N

LN

PIR

Skala: 3:1Dato : 19-09-02Tegnet: KOE 4100328

PIR

L1L2N

L1 N L2

41-300/ 41-320

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3m²

ø3,4m9m²

ø8m50m²

ø13,5m140m²

0,8m


Product data

Movement sensor PIR 360° (230 V AC) for indoor light and ventilation control.

• Type 41-300 light control (1 channel)

• Type 41-320 light and ventila-tion control (2 channels)

• 360° detection angle• Large range - 140 m²• Registers small movements

in a range of 9 m²• Extra energysave feature.

The light can be switched offmanually upon leaving.

Sensor PIR 360° is available in2 versions:41-300 Movement and daylight con-

trol (1 channel)41-320 As for 41-300, with additional

potential free output relay for ventilation control (2 channels)

If the light has been forgotten when leaving the room, then it will automa-tically switch off, after the preset time has elapsed.

Sensitivity can be adjusted post-installation, if necessary.

To avoid undesired lighting in par-ticular areas, the sensor lens can be delimited with the enclosed mask.

Manual operation of push button switch• Press briefly (0.5-2 sec) to switch

off the light upon leaving the room.

• Constant light on upon pro-longed press > 2 sec. (returns to auto again when pressed briefly)

• Constant light off upon pro-longed press > 2 sec. (returns to auto again when pressed briefly)

Technical DataInputSupply voltage 230 V AC ±10 % 50 HzPower consumption 41-300 act./pas. max. 1 WPower consumption 41-320 act./pas. max. 1.5 W

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorecent lamps 1.200 VACompensation capacity 140 µFEnergisave lamps 18 W / 58 pcs.Low-voltage - Inductive (ring core) 500 VALow-voltage - Electronic ballast 1.200 VATungsten-halogen lamps 230V 2.300 WMax. starting peak 80A/20 ms

PerformanceDetection angle 360°Detection range - Small movements 9 m² Detction range - Body movements 140 m²Time delay 1...30 min.Lux range 10-1,000 luxHysteresis +10 %Protection class IP 20Cover colour RAL 9010 (White)Cable max. dimension 2 x Ø 12 mmCeiling installation height Max 2,5 - 3 mAmbient temperature -5° C...+50° C


Dimensions

Connection diagram

Detection

Type 41-320 (Light/Vent.)Extra potential free relay output (ventila tion) is daylight independent.Time delay = Timer setting + 25 %Remaining data as for relay (Light)

Parallel connectionMounting of two sensors on the same switch will because of lux-function, affect the control system and is not recommended.

Without lux-function - parallel connection is possible.

41-320 (light and ventilation)

41-300 (standard)

PlanningTo ensure optimal detection at the entrance to the room, reduce the range as shown in Fig. 3 when positioning the sensors. Effective detec-tion of a person is achieved at minimum 0.8 m height above floor level.




R7

Product Type EAN no.Sensor PIRStandard 41-300 5703102 201065Light/vent 41-320 5703102 201072

Order numbers

50

127

59

41-302

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3m²

ø3,4m9m²

ø8m50m²

ø13,5m140m²

0,8m

L N SL

LNSL

PIR

L N SL

PIR

41-302 - Master 41-302 - Slave


Product data

Movement sensor PIR 360° (230 V AC) for indoor light control - Master/slave model

• Master/slave model- Create a system easily

• Automatic switch-on and off of lighting

• 360° detection angle• Large range - 140 m²• Registers small movements

in a range of 9 m²

The integrated light sensor measures the light level in the area continuously.

The light is switched on if the light level falls below the preset value and the movement sensor detects activity in the coverage area.

The sensors can be connected in a master/slave system, so you are able to cover a larger area. On the master unit Lux and Time are set, on the slave unit Time only.

The way you install and set the unit, determines if the unit is functioning as master or slave.

Calculating the total off delay:Master unit eg. set to 15 min.Slave unit eg. set to 10 min.Total off delay is 25 min.

The shortest possible off delay is2 minutes (master 1 min. + slave 1 min.).

If only the master unit is used, the shortest possible off delay is 1 minute.

To avoid undesired lighting in parti-cular areas, the lense must be con-strained with the enclosed mask.

Pushbutton operationOption to use a pushbutton to switch on the light, provided the light level is lower than the preset value.

Technical dataInputSupply voltage 230 V AC ±10 % 50 HzPower consumption approx. 1 W

OutputRelay contact NO, µ 10 AMax load:Incandescent lamps 2.300 WFluorescent lamps 1.200 VACompensation capacity 140 µFMax. starting peak 80 A / 20 ms

PerformanceDetection angle 360°Detection range - Small movements 9 m² Detction range - Body movements 140 m²Lux range 10…1000 LuxHysteresis +10 %Time delay 1...30 minSensitivity Selected manuallyActivation indicator on/off Selected manuallyTest modes Selected manuallyProtection class IP 20Cable max. dimension 2 x ø12 mmCeiling installation height 2,5 - 3 mAmbient temperature -5° C…+50° C


Please note!All slave units MUST have the same PHASE as the master unit.

Dimension

Detection

Product Type EAN no.PIR master/slave 41-302 5703102 203922

Order numbers




PlanningTo ensure optimal detection at the entrance to the room, reduce the range when positioning the sensors. Effective detection of a person is achieved at minimum 0.8 m height above floor level.

R1

Conection

Push (230 V)

51

127

59

L1 N

L1L2N

PIR

L21 2

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3 m²ø3,4m9 m²ø8m

50 m²m

ø13,5140 m²

0,8m

41-330


Product data

Movement sensor PIR 360° 2-CH (230 V AC) for indoor light control in classrooms

• Type 41-330 Sensor PIR 2-CH -for control of 2 series of ceiling lights + board lighting.

• Manual switch-on and auto-matic switch-off of lighting

• 360° detection angle• Large range - 140 m²• Registers small movements in a

range of 9 m²

Sensor PIR 2-CH is used in classrooms and is equipped with 2 separate outputs (channels).

Channel 1: is daylight and movement controlled, and is applicable to ceiling lights in the series closest to the windows.Channel 2: is movement controlled only, and it can be applied to ceiling lights remote from the windows, and board lighting. (Potential free relay)

OperationLights must always be turned on manu-ally at the push button switch and can be turned off again manually when leaving. If the light has been forgotten upon leaving the room, then it will automatically switch off after the pre-set time has elapsed.

Channel 1 is daylight controlled and will switch on and off dependent upon the level of daylight, provided there is human movement in the premises.Channel 2 will always switch on and off upon manual operation of the switch. Constant light off, such as for showing a film, is achieved by manual operation of the push button switch.

SensitivitySensitivity can be adjusted post-installa-tion, if necessary.

MaskTo avoid undesired lighting in particular areas, the sensor lens can be constrained with the enclosed mask.

Technical DataInputSupply voltage 230 V AC ±10 % 50 HzPower consumption active/passive max. 1.5 W

OutputRelay contact NO, µ10 A, 250 V ACMax load:Incandescent lamps 2.300 WFluorecent lamps 1.200 VACompensation capacity 140 µFEnergisave lamps 18 W / 58 pcs.Low-voltage - Inductive (ring core) 500 VALow-voltage - Electronic ballast 1.200 VATungsten-halogen lamps 230V 2.300 WMax. starting peak 80 A/20 ms

PerformanceDetection angle 360°Detection range - Small movements 9 m² Detction range - Body movements 140 m²Time delay 1...30 min.Lux range 10-1,000 luxHysteresis +10 %Protection class IP 20Cover colour RAL 9010 (White)Cable max. dimension 2 x Ø 12 mmCeiling installation height Max 2,5 - 3 mAmbient temperature -5° C...+50° C


Dimensions

Connection diagram

Parallel connectionMounting of two sensors on the same switch will because of lux-function affect the control system and is not recommended.

41-330 (2-CH)

Detection

PlanningTo ensure optimal detection at the entrance to the room, reduce the range as shown in Fig. 3 when positioning the sensors. Effective detec-tion of a person is achieved at minimum 0.8 m height above floor level.




Product Type EAN no.Sensor PIR2-CH (classroom) 41-330 5703102 201195

Order numbers

R7

52

43-997

43-998


Product data

R2

Technical dataProtection cap type 43-997

Dimensions Height 171 mm Width 146 mm Depth 108 mm

Colour White

Technical dataProtection cap type 43-998

Dimensions Height 171 mm Width 146 mm

Colour White

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas.

Use it as protection against both ball games and vandalism.

Fits:• 41-262• 41-271• 41-272• 41-274• 41-231

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas.

Use it as protection against both ball games and vandalism.

Fits:• 41-300• 41-301• 41-320• 41-330• 41-340• 43-205• 43-208• 43-215• 43-222• 43-225

Product Type EAN no.Protection cap 43-998 5703102 201850

Order number:

Product Type EAN no.Protection cap 43-997 5703102 201843

Order number:

53

16-903

16-903

16-901/ 903


Product data

Technical dataType 16-901:Power range 16-125 WConnection time 1.7 sec using 36 W lamp

Type 16-903:Power range 4-22 WConnection time 1.7 sec using 18 W lamp

General information:Supply voltage 200-260 VFrequency 50/60 HzBallast type Inductive or capacitiveDisconnection of defectivelamps max. 5 secondsSwitch-on voltage 1.5 kV Multi pulsingTemperature, Ta -20°C...+80° C Min. start temperature -20° C Casing PolycarbonateWeight 10 gr.

Electronic starter forfluorescent lamps

• Also for series-connected lamps

• Non-flash start of fluore-scent lamps

• Reduction of maintenance costs (reduced frequency of defective lamp replace-ments)

• Electronic starter discon-nects defective lamps, thus preventing irritating flashing and unnecessary power con-sumption

• 20-30 % longer life of lamps• Life of electronic starter

> 50,000 hours• Low temperature range -20° C• Approved according to IEC

926 and EN 60926

Servodan’s electronic starter has a great number of advantages compa-red with traditional starter switches. The electronic starter ensures that many switch ON and OFF do not reduce the life of the lamp.

Servodan’s electronic starter can be used in a wide temperature range, and the built-in solid-state relay ensures optimum switching on of fluorescent lamps. Controlled heating of the cathode followed by a series of high-voltage start pulses ensure precise switching on of fluorescent lamps - without flashing.

The electronic starter switches off any defective lamps. Thus the irritating flashing occurring in traditional starter switches is avoided.

Electronic starter type 16-903Used for 18 or 20 W 600 mm fluore-scent series-connected lamps and for lamps in single and double-tube fittings in 4-22 W range.

R3

Principle diagram for series-connected lamps.

Dimensions

Product Type EAN no. Electronic starter 16-901 5703102 002587Electronic starter 16-903 5703102 003263

Order numbers

54

1 2 3

24 V DC Ri 2 K ohm

PLCPPC

CTSBMS

Lux 0-10V

0-10 V

N

SENSOR

52.0

29.5

30 - 3000 lx300 - 30K lx600 - 60K lx3 - 300 lx

+


Test

Mode Set +

App In Out

Luxrange

Luxon

Offdelay Test

Set -

B1 2 3

2 3

B

D

4 5

D1

C C1 2 3

L

N

21 3

Lux0-10V

Control36-080



RJ12-16 polet

A

B

D

1 72 3 4 5 6 8 9 10 11 12

1 72 3 4 5 6 8 9 10 11 12

1 2 3 4 5 6

A

B

D

RJ12-26 polet

21 3

Lux0-10V

43-197


Product data

R2



PerformanceLux ranges: 3...300 lux, 30...3K lux 300...30K lux, 600...60K luxProtection class IP 20Connection Screw terminalsMax. distance to Control 100 mCable - Class II control 0,6 mmAmbient temperature -40° C...+50° C

Light sensor 0-10 V for indoor mounting

• For connection to: - Control 36-080 - Luxstat Control 78-0XX• Screw terminals• Protection class IP 20• 4 lux ranges: - 3...300 lux - 30...3.000 lux - 300...30.000 lux - 600...60.000 lux

The Sensor 43-197 is a light sensor which covers a number of lux ranges and is intended to control indoor lighting.

The light sensor 43-197 has screw terminal connection, so there is no need for extra junction box.

If the location requires a higher pro-tection class than IP20, use type 43-198 which has a IP54 protection class.

Placement:Fig. 1: When daylight enters the room from the side, the light sensor must be placed so that it “sees” the incoming daylight.

Fig. 2:The light sensor must be placed behind any curtains or sunblinds fitted behind the window.

Fig. 3:The light sensor should be placed so that it “looks” directly up at the sky. To avoid direct sunlight, place the light sensor as shoown.

Dimensions

Placement

Selection of lux range

External control system

Default setting:30...3000 lux

Light sensor43-197

Luxstat Control 78-0X0

Fig. 1

Fig. 2

Fig. 3

Connection

Product Type EAN no.Light sensor 43-197 5703102 203311

Order numbers

Light sensor43-197

Light sensor43-197

55

43-16165

50 35

53

38

65

50 35

53

38

J2 J3 J4

LRN

J2Lux

J3Course

J4Wake-up

Factory setting300 - 30.000lx

600 - 60.000lx

1

10

Factory setting100

1

Factory setting10

100


Product data

R4

Metal

Light sensor

Light sensor

“hidden”receiver

Radio shadow(dead spot)

ReceiverVisual contact

30 m 100 m

Receiver

20 cm wall

Receiver

60 cm wallLow

high attenuation

attenuation

30 m 100 m

Technical dataSupply voltage Two split solar cells + internal backup capacityRF transmitter system: 43-161 Profile 2008 STM110 v.1.04Transmission frequency 868 MHzTransmission output <10 mWTransmission rate at default setting:Less than 4 steps: every 17 minMore than 4-5 steps: Less than 10 sRF distance Approx. 300 m (open field)(Range, see below) Approx. 30 m (indoor)Lux range 1 300...30.000 lux 117 lux / step STM110 PIN5 A/D0 (4LSB)Lux range 2 600...60.000 lux 234 lux / step STM110 PIN6 A/D1 (5LSB)Protection class IP54Ambient temperature -20° C...+55° C

ApprovalsCE according to EN 60669-2-1EnOcean approval See www.servodan.com

Distance

Jumper setting

Dimension Wireless, selfpowered light sensor with EnOcean transmitter

• Powered through solar cells• For outdoor usage• EnOcean STM110 transmit-

ter• 2 lux ranges:

- 300...30.000 lux- 600...60.000 lux

• Unique address code via “learn mode”

• IP54

The wireless light sensor model 43-161 is a light sensor based on wireless technology. The light sensor transmits an RF telegram to a receiver module.

The light sensor measures the light level continuously and compares it with the RF telegram transmitted earlier. In the event of a change in the light level of more than 4 steps (1 step = 117 lx in the default lux range, otherwise 234 lx), a relevant RF tele-gram will be transmitted within 10 seconds.In normal operation a current RF telegram will be transmitted approx. every 17 minutes.

The light sensor is designed to be installed outdoors on a typical façade wall. We recommend installation hig-her than 2.5 meters in order to reduce inconvenient lighting, distracting sha-dows, vandalism, etc.

As the power supply is generated by the internal solar cell, the light sensor must see a minimum of 400 lux for more than 5 hours, in order to have sufficient energy to transmit the necessary RF telegrams (for example throughout the night).

Placement

Product Type EAN no.Light sensor wireless 43-161 5703102 205025

Order number

56

41-301127

59

PIR

1 2 3 4 5 6

LN

L N230V ac

PIR

1 2 3 4 5 6-- +

24Vac / DC

+--

TIMELUX1 2 3 4

LRN LED3

LED1LED2

LUX TIMEMin Off 1min

15min

30minMax

LED1 = Light + movementLED2 = MovementLED3 = RF - Transmit

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3m²

ø3,4m9m²

ø8m50m²

ø13,5m140m²

0,8m

230 V

24 V


Product data

Movement sensor PIR 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

• Wireless technology (EnOcean RF transmitter)• Light sensor: 1. Priority: Daylight 2. Priority: Movement• Automatically on/off• 360° detection angle• 140 m² detection range• 9 m² detection range for “small movements”

The model 41-301 PIR Sensor is a movement sensor based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off.

FunctionThe integrated light sensor measures the light level in the area continuously, and compares it with the preset value specified via the LUX setting button. If the light level falls below the pre-set value and the movement sensor detects activity in the coverage area, the light is switched on.

The integrated cut-out delay of 1-30 minutes (adjustable) makes sure that the RF switch-on telegrams are sent continuously (approx. once a minute) to the receiver, until the sensor does not register activity or the selected ligth level is reached.

If you press the LRN button, an RF status telegram will immediately be sent to the receiver. A simple and easy connection.

See available receivers onwww.enocean.de

Technical dataInputSupply voltage 230 V AC ±10 % 50 HzAlternative voltage 24 V AC / DC ±10 %Power consumption 230 V AC/ 24 V 1 W/0,5 VA

OutputRF system transmitter EnOcean STM100

PerformanceLux range 10…1000 LuxLux range off LUX is turned towards max to position off, no daylight blocking.Hysteresis > +10 %Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blockingTransmitter frequency 868 MHzTransmitter output < 10 mWTransmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer setRF – range 100 meters in open space/free line of vision, approx. 30 meters in buildingsSensitivity OptionActivation indicator on/off OptionTest modes OptionProtection class IP 20Cable bush 2 x Ø12 mmAmbient temperature -5° C…+50° C

ApprovalsCE accoding to EN 60669-2-1

Dimensions

Connection

Factory settings

Settings

R2

Detection


Plan view, diameter indicated at floor level.



Product Type EAN no.Sensor PIRWireless 41-301 5703102 201768

Order numbers

57

41-380127

59

PIR

1 2 3 4 5 6

LN

L N230V ac

PIR

1 2 3 4 5 6-- +

24Vac / DC

+--

TIMELUX1 2 3 4

LRN LED3

LED1LED2

LUX TIMEMin Off 1min

15min

30minMax

LED1 = Light + movementLED2 = MovementLED3 = RF - Transmit

A B C D

ø3 m

ø20 mø12 m

ø5 m

ø2m

3m²

ø3,4m9m²

ø8m50m²

ø13,5m140m²

0,8m


Product data

Movement sensor PIR 360° Wireless 230 V AC and 24 V AC/DC for indoor lighting control

• Wireless technology (EnOcean RF transmitter)• Light sensor: 1. Priority: Daylight 2. Priority: Movement• Automatically on/off• 360° detection angle• 140 m² detection range• 9 m² detection range for “small movements”

The model 41-380 PIR Sensor is a movement sensor based on wireless technology that sends an RF telegram to a receiver module, which switches the light on and off.

FunctionThe integrated light sensor measures the light level in the area continuously, and compares it with the preset value specified via the LUX setting button. If the light level falls below the pre-set value and the movement sensor detects activity in the coverage area, the light is switched on.

The integrated cut-out delay of 1-30 minutes (adjustable) makes sure that the RF switch-on telegrams are sent continuously (approx. once a minute) to the receiver, until the sensor does not register activity or the selected ligth level is reached.

If you press the LRN button, an RF status telegram will immediately be sent to the receiver. A simple and easy connection.

See available receivers onwww.enocean.de

Technical dataInputSupply voltage 230 V AC ±10 % 50 HzAlternative voltage 24 V AC / DC ±10 %Power consumption 230 V AC/ 24 V 1 W/0,5 VA

OutputRF system transmitter: Profile 2008 STM110 v.1.04PerformanceLux range 10…1000 LuxLux range off LUX is turned towards max to position off, no daylight blocking.Hysteresis > +10 %Time delay 1...30 minutes, with daylight blocking 10 sec.…30 minutes, no daylight blockingTransmitter frequency 868MHzTransmitter output < 10 mWTransmitter rate of recurrence On standby once per approx. 100 sec. Immediately when PIR activation timer setRF range 100 meters in open field/free line of vision, approx. 30 meters in buildingsSensitivity OptionActivation indicator on/off OptionTest modes OptionProtection class IP 20Cable bush 2 x Ø12 mmAmbient temperature -5° C…+50° C

ApprovalsCE accoding to EN 60669-2-1

Dimensions

Connection

Factory settings

Settings

R0

Detection


Plan view, diameter indicated at floor level.



Product Type EAN no.Sensor PIRWireless 41-380 5703102 204998

Order numbers

58

41-580

8031

120

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m

ø7m (38m2)ø4m (12m2)

ø3m

ø5m

0,8m

230 V

70-100

76-922

41-580


Product data

Detection range

Dimensions

Technical dataInputPower supply Solar cell, zero-energy.Lux-level for function more than 80 lx measured by luxmeter. Guidance: 25W bulb, distance approx. 50 cmPower consumption <10 µWProtection IP20Temperature range +5° C ... +50° C indoor usePerformanceInstallation height 2,5 - 4mDetection range 360°, ø7 – ø12 m

Type of signal/rangeRF signal EnOcean 868 MHz, <10 mWRF signal range 100 m in free range/ 30 m in buildings, see RF wireless informationEnOcean transmitter Profil 2008 STM110 v.1.04ApprovalsCE iht.R&TTE 1999/5/ECETSI EN 301 489-1: 2005-09ETSI EN 301 489-3: 2002-08 (SRD class2)ETSI EN 300 220-3: 2000-09

Penetration ratesMaterials PenetrationWood, plaster and glass withoutsurface foil 90-100 %Brick, MDF and chipboard panels 65-95 %Concrete reinforcement 10-80 %Metal, aluminium panels, etc. 0-10 %

Wireless and batteryless movement sensor type 41-580 for indoor lighting control

• Zero-energy sensor supplied by a solar cell

• Detection range 7 meters/ 360°

• For ceiling mounting • Setting of lux and time by the

wireless receiver or a Com-lux system

The PIR sensor is a product in the Servodan wireless concept. Lighting is turned on manually by the wire-less switch (76-922) and the PIR sensor ensures that lighting remains switched on as long as moving peo-ple are detected.

Via the wireless receiver (e.g. 70-100) the required time delay is set, which ensures that the light remains on for a period after the last person has left.

Recommended installation height is 2-4 m. At 2.5 m the sensor has a range of 7 m in 360° (38 m²) .

A wireless and batteryless switch (76-922) must be integrated in order to switch on the light manually.

The solar-powered PIR sensor requires at least 80 lux in order to ini-tiate and operate as required.

Product Type EAN no.Sensor PIR 41-580 5703102 203991Solar/EnOceanWireless receiver 70-100 5703102 204851Wireless/batteryless 76-922 5703102 201737push-button

Order number

Principle– Manual switch on/off by push-button,automatic switch off by PIR sensor

R2




59

82 mm

82 mm


Product data

76-922/ 923

15 mm

Wireless Push-button2 channel type 76-9224 channel type 76-923

• Transmits wireless signal to Wireless receiver module

• Mounted with screws or tape on the wall

• Without battery – entirely main-tenance-free

The wireless push-button is a batteryless and maintenance-free wall transmitter, which by the means of the wirelessreceiver can control electrial equipment.When programming a wireless Push-button to communicate with a wireless receiver, please follow the instructions for the wireless receiver.

A wireless push-button may – when in programming mode – not be more than 5 m away from a wireless receiver, because the reciever then has a limited range.

The wireless system is particularly suited for renovations, future installation of elec-trical equipment or in offices with move-able walls.

MountingMust always be mounted on a flat sur-face, so the bottom is not twisted when installing. Uneveness can lead to func-tional problemsand cause the bow of the transmitter to stick.

The wall transmitters can be adhered to flat, smooth surfaces such as painted walls, tiles, furniture, wood etc. using the accompanying adhesive strips.

The double sided adhesive film can be used to mount on glass walls. This adhe-sive film completely covers the back of the wall transmitter. It is applied first to the assembled wall transmitter and is thenstuck to the glass surface.

Technical dataOperating frequency 868,3 MHZTransmission effect 10 mWModulation type ASK Amplitude Shift KeyingOperating cycles min. 50.000Ambient temperature -25° C...+65° C in dry roomsRelative humidity 0 %...95 %

R2

Transmission rangeThe main factors that influence the trans-mission range of the wireless system are the antenna location of the receivers and transmitters, the building structure and the number of obstacles in the connection path.

Other factors are noise sources that affect the receiver and dead spots caused by signal reflection from nearby conductive objects.

Since the anticipated transmission range depends on these system conditions, range tests should be performed before a specific range is determined for an appli-cation.

The following transmission ranges are to be viewed as general guidelines:• in the open air approx. 300 m• in halls approx. 200 m• in corridors approx. 50 m• plasterboard/wood (max. 7) approx.

30 m• tile and cellular concrete (max. 3)

approx. 20 m• reinforced concrete walls/ceilings (max.

1) approx. 10 m

Transmission range is limited by:• insulation material with metal foil• intermediate ceilings with metal or car-

bon fibre panels• lead glass or metal-coated glass• mounting wall transmitters on metal

walls

Dimension

Product Type EAN no. Puh-button, 2 ch. 76-922 5703102 201737Push-button, 4 ch. 76-923 5703102 201744

Order numbers

60

70-100

143

112 36

230V~ 230V~

DIP 4DIP 3DIP 2DIP 1

CLR

LRNTIME LUX

ø4

N ø5

L ø6

ø1

ø2 N

ø3 L

ø7

ø8

ø5ø2ø1 ø4ø3

N

L230V

ø7ø6 ø8NN L LinL Lout

230 V

70-100

76-922

41-580

41-380

41-197


Product data

Dimensions

Technical dataInputSupply voltage 230 V AC 50 Hz ±10 %Power consumption <3W

OutputRelay NO, µ 10 A, dry contactLoad: Incandescent lamps 2300 W Fluorescent tubes, not compensated 1200 VA Halogen incandescent lamps 2300 W Max. compensation capacity 140 µF Energy-saving lamps 58 pcs. (18W)Max. starting Peak 80 A/20 m sec.

PerformanceReceiver EnOcean RCM 130, standard protocol 868MHzOff delay 0 - 30 minLux range Depending on external wireless light sensorLED indication For received learned signalProtection Class IP 20, Enclosure Class IIAmbient temp. -5° C...+50° C.

ApprovalsCE according to EN 60669-2-1EnOcean approval See www.servodan.com

Wireless EnOcean receiver type 70-100 for indoor lighting control, 230 V AC

• 230 V AC receiver getting a RF-signal from Sensor PIR 360° Wireless/EnOcean and from EnOcean push-button

• Time delay from 0 to 30 min.• Easy mounting and installa-

tion

The wireless receiver is a product in the Servodan wireless concept and can operate together with the wireless push-buttons for manual turning on and off the lighting. It can also operate together with both the wireless push-button and the wire-less and battery less PIR sensor (type 41-580). In that case the lighting is turned on by the push-button and the PIR sensor will automatically turn the light off, if no activity is registered in the detection area of the sensor. Of course, the light can always be turned off by the push-button. The wireless receiver control, which is supplied with 230 V, can be con-nected directly to 2300 W max. load.

Time delay for the PIR sensor is set optional from 0 to 30 min.

Product Type EAN no.Wireless receiver 70-100 5703102 204851Sensor PIR Solar/EnOcean 41-580 5703102 203991Wireless/battery less 76-922 5703102 201737push-buttonWireless sensor PIR 41-380 5703102 204998

Order number

Connection

R3

Principle

By using the PIR sensor, type 41-380 the light also can be turned on and off automatically.

230 V/24 VWith built-inlight sensor.

61

74-010

74-290

74-290

74-010

74-010

NL


Product data

Dimmer 700 W

• For low voltage halogen lamps via electronictransformer

• For recessed ceilings• For incandescent lamps

and tungsten-halogenlamps 230 V

• Push button operated• Load up to 700 W

The Tronic built-in dimmer as trailing-edge dimmer is designed for installa-tion in recessed ceilings.

It is controlled by common flush-mounted push buttons with the fol-lowing operation principle:

Short touch = On/off switching of the lighting systemLong touch = Continuous dimming

Short-circuit and overloadprotectionThe light dimmer is supplied with an electronic fuse. The switch-off time in connection with a short circuit is approximately 7 seconds.

Overload protectionAutomatical switch-off at overload or to high temperatures.

Technical dataInputPower supply 230 V ACPower consumption approx. 1 W

OutputLoad 50-700 W - Elec. transformer + low volt halogen lamps- Incandescent lamps 230 V- Tungsten-halogen lamps 230 V- Mixed load of the above

PerformanceAmbient temperature max. 45° C

Incandescent lamps, low volt-age transformers, amplifier units max 700 W

Amplifier unit74-290

74-290 - Max. 10 pcs.

Max.700 W

Push button

Load 74-010 - Max. 700 W

Dimmer74-010

Dimension

Connection

System

Product Type EAN no.Tronic dimmer 74-010 5703102 002532

Amplifier unit 74-290 5703102 002549

Order number

R0

62

74-290

74-290


Product data

Technical dataInputSupply voltage 230 V AC Power consumption approx. 1 W

OutputLoad 100-700 W - elec. trans. + low-voltage halogen lamps - incandescent lamps- incandescent halogen lamps 230 V AC- combination load of above

PerformanceAmbient temperature max. 45° CCasing temperature max. 70° C

Dimmer Tronic Trafo

* Marked Tronic Trafoermust at least be 105 W

74-290

*) Direct dimmer load

R0

Dimensions

Tronic Trafo

Power up dimmer forinstallation and surface mounting

• For dimming with trailing edge dimmers

• For 230 V AC• Load up to 700 W

The power up dimmer 74-290 is used to dim large loads and is designed for concealed installation in the ceiling (take ventilation into consideration) or surface mounting.

If you combine several power up dim-mers you can control loads of up to 2.300 W via one single dimmer.

The power up dimmer may not be used together with leading edge dim-mers.

The power up dimmer is fitted with electronic protection. In the event of a short circuit of < approx. 7 sec., auto-matic reconnection will take place. In the event of a short circuit of > approx. 7 sec., the unit will cut out.

Overload protection provides tem-peraturedependent downward adjust-ment at 20 % overload or overheat-ing.

Connection

Connection

Product Type EAN no.Power up dimmer 74-290 5703102 002549

Order number

Electronicdimmer RC

Tronic trafos halogen lamps

Output

Tronic trafos halogen lamps

63

74-040


Product data

Push button controlleddimmer 1-10 V

• For adjustable ballasts 1-10 V• Setting for minimum light• Memory for last level

Flat built-in unit for switching and controlling of electronic ballasts with1-10 V interface.

The minimum level of the light inten-sity can be adjusted on the dimmer.

It is controlled by common flush-mounted push buttons with the fol-lowing operation principle:

Short touch = On/off switching of the lighting systemLong touch = Continuous dimming

Setting the memory button to on, the dimmer will always switch on the lighting at the last level.

The type of HF ballast is decisive for how many you can connect to one dimmer. Typical sources a HF ballast 0,5 to 2 mA.

Technical dataPower supply 230 V AC/50 HzSwitch Relay

Load:- Resistive and inductive load 2,300 W- HF Depend on typeMax. load Max. 200 mAGalvanicinsulation 1-10 V 2 kV-basisinsulationAmbient temperature Max. 50° CNo-load protection YesProtection class IP20

R3

Connection

1 - Phase control

3 - Phase control

Dimensions:

Min. light level

Memory on/off

Product Type EAN no.Dimmer 1-10 V 74-040 5703102 006561

Order number

64 Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | [email protected] | www.servodan.com

Notes

65

Low voltage

66

74-210...214

230V 50 Hz

12V

N

Ltc

NL

230V 50 Hz

12V

N

L

tc

N

74-291

74-293 (AMP)

L L1 B H

74-210 74-212 74-213

191 175 39 34

74-214 220 203 38,5 44

Type 74-210 60 WType 74-212 105 WType 74-213 150 W


Product data

R5

Electronic converters for low-voltage halogen lamps

• Soft start• No-load protection• Short-circuit and overload protection• Over-temperature protection• Adjustable with trailing-edge dimmer (R-C)

Electronic converters are used for low-voltage halogen lamps and are adjustable with trailing-edge dim-mers.

Electronic converters are particularly suitable for being built into furnishings and in combination with low-voltage systems.

Electronic converters have a softstart system protecting the lamps; thus lifetime is extended. The converters have overload protection, short-circuit protection and overtempe-rature protection. Likewise, they have automatic restarting.

NB! Secondary leads to lamps must not exceed 2 m. Primary and secon-dary leads must not cross one anoth-er.

Primary and secondary cables must not cross one another. This can cause noise.

Technical dataSupply voltage 230 V acSecondary voltage 11.5 V effLifetime 25.000 hours

Primary wire H03W-F 2 x 1.5 mm²Secondary wire H03W-F 2 x 0.75 mm² as minimum

Type 74-210: 60 VACurrent 0.27 A at 60 WOutput 20-60 WAmbient temperature, ta max. 50° CCasing temperature, tc max. 70° C




Dimension

Type 74-214 200 W

Connection

Connection

Product Type EAN no.Converter 20-60 W 74-210 5703102 003751Converter 10-105 W 74-212 5703102 003768Converter 35-150 W 74-213 5703102 003805Converter 50-200 W 74-214 5703102 006639Distribution terminal 74-291 5703102 002631Distribution term. AMP 74-293 5703102 201799Power amplifier 74-290 5703102 002549

Order numbers

Distribution terminals

Primary Secondary

Primary Secondary

67

74-224

74-227

H

L

B

L x B x H74-224 162 x 45 x 1774-227 212 x 46 x 21

230V/50H

z 11,5

V~

6 A

MP

6X

2m

12V

12V

230V

12V

230V

12V

230V

12V

230V max. 2m

max. 2m

12V

12V

230V

12V

230V

230VN

LDIMMER

12V12V

12V

230V

12V

230V


Product data

R0

Electronic converters with AMP plugs for low-voltage halogen lamps

• Flat models• Soft start• Off-load protection• Short circuit and overload protection• Overheating protection• Adjustable with trailing edge dimmer (R-C)

Electronic converters are used for low-voltage halogen lamps and can be adjusted with rear edge dimmers.

The converters have a soft start, which protects the bulbs and thus extends their useful life.

The electronic converter cuts out automatically in the event of a short circuit or an overload 1.8 times the nominal output. The converter does not have a traditional built-in fuse. The secondary circuit with the load is therefore not separate. Once a fault has been corrected, the converter will automatically reconnect the load.

N.B. The length of the secondary cables to the lamps may not exceed 2 m.

Primary and secondary cables must not cross one another. This can cause noise.

Technical dataSupply voltage 230 V 50-60 HzSecondary voltage 11,5 V outputCurrent 70 W: 0,31 A 120 W: 0,50 AOutput 70 W: 10-70 W 120 W: 20-120 W

Short circuit and overload protection Electronic cutout Automatic reconnection once fault corrected

Connection Gentle connection of light source Soft start prevents starting current peak

Ambient temperature maks. 50° CCasing temperature 70 W: maks. 70° C 120 W: maks. 80° C Overheating protection thermal cutout

Low-voltage directive EN 61046 Primary cable 2 x 0,75 mm² x 2 meter with Euro plugSecondary cable 6 AMPInsulation class Class II

Dimensions

Connection

Product Type EAN no.Converter 70 W AMP 74-224 5703102 201645Converter 120 W AMP 74-227 5703102 201669Power amplifier 74-290 5703102 002549

Order numbers

68

74-230

74-231

74-230

74-231

230 V AC12 V AC

230 V AC

12 V AC

12 V AC

74-291

74-293 (AMP)


Product data

R2

Electronic converters for low-voltage halogen lamps

• Flat models• Soft start• Off-load protection• Short circuit and overload

protection• Overheating protection

Electronic converters are used forlow-voltage halogen lamps and canbe adjusted with rear edge dimmers.

The converters have a soft start,which protects the bulbs and thusextends their useful life.

Overload or over-temperature protection by automatic reduction of power.

The electronic converters cuts outautomatically in the event of a shortcircuit. The converter does not have a traditional built-in fuse.The secondary circuit with the load istherefore not separate. Once a faulthas been corrected, the converterwill automatically reconnect the load.

N.B. The length of the secondarycables to the lamps may not exceed2 m.

Primary and secondary cables mustnot cross one another. This can causenoise.

Technical dataSupply voltage 230 V 50-60 HzSecondary voltage 70 W: 11,7 V eff. 105 W: 11,8 V eff.Current 70 W: 0,33 A 105 W: 0,45 AEffect 70 W: 20-70 W 105 W: 20-105 W

Short circuit and overload protection Electronic cutoutConnection Gentle connection of light source Soft start prevents starting current peak

Ambient temperature max. 50° CCasing temperature 70 W: max. 70° C 120 W: max. 80° C

Secondary cable 2 x 1,5 mm² as minimum

Overheating protection Thermal cutout

Low-voltage directive EN 61046

Insulation class Class II

Dimension

74-230

74-231

PR

I AC

230

V ~

SE

C A

C12

V ~

PR

I AC

230

V ~

SE

C A

C12

V ~

152

138

17,5

43,5

32

8

4,5

18

8 4,5

42

148

175

32

Connection

Distribution terminals

Product Type EAN no.Converter 20-70 W 74-230 5703102 201812Converter 20-105 W 74-231 5703102 203304Distribution terminal 74-291 5703102 002631Distrib. terminal AMP 74-293 5703102 201799Power amplifier 74-290 5703102 002549

Order number

69Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | [email protected] | www.servodan.com

Notes

70 Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | [email protected] | www.servodan.com

Notes


Type survey

Type EAN no. Description Page16-901 5703102 002587 Electronic starter 16-125 W 5316-903 5703102 003263 Electronic starter 4-22 W 53

18-092 5703102 203250 Minilux control with light sensor 918-093 5703102 203267 Minilux control with nightblock 11

36-080 5703102 203298 Minilux control - outdoor 1836-080 5703102 203298 Control - indoor 2236-092 5703102 203908 Minilux control 1336-982 5703102 203496 Power Pack 34

41-042 5703102 201270 Minilux day/night switch, 12 V 841-044 5703102 201287 Minilux day/night switch, 24 V 7

41-047 5703102 201294 Minilux day/night switch, 230 V 441-054 5703102 203588 Minilux day/night switch, 230 V 541-055 5703102 204202 Minilux day/night switch, 230 V 641-201 5703102 203366 Movement sensor 4741-227 5703102 006806 Minilux movement sensor 1441-231 5703102 203335 Minilux movement sensor 1541-232 5703102 203342 Minilux movement sensor 1641-233 5703102 203359 Minilux movement sensor 1741-262 5703102 203229 Minilux movement sensor 1941-270 5703102 203540 Movement sensor PIR 3641-271 5703102 203557 Movement sensor PIR 3741-272 5703102 203564 Movement sensor PIR 3841-274 5703102 203571 Movement sensor PIR 3941-279 5703102 204318 Movement sensor PIR 4641-300 5703102 201065 Movement sensor PIR, 230 V 4941-301 5703102 201768 Movement sensor PIR wireless 5641-302 5703102 203922 Movement sensor PIR, 230 V 5041-320 5703102 201072 Movement sensor PIR, 230 V 4941-330 5703102 201195 Movement sensor PIR, 230V 5141-340 5703102 201201 Movement sensor PIR, 24 V 4441-380 5703102 204998 Movement sensor PIR wireless 5741-400 5703102 203601 Movement sensor PIR, 230 V 4841-440 5703102 204004 Movement sensor PIR, 24 V 4041-549 5703102 204547 Movement sensor PIR, 24 V 4541-580 5703102 203991 Movement sensor wireless 58

43-161 5703102 205025 Wireless selfpow. light sensor 5543-196 5703102 203373 Minilux light sensor 1043-197 5703102 203311 Light sensor 5443-198 5703102 203595 Minilux light sensor 1243-205 5703102 005687 Sensor DT-A 4143-208 5703102 005809 Sensor PIR-A 4243-215 5703102 005700 Sensor DT-A 4143-222 5703102 005706 Sensor UL-A 4343-225 5703102 005724 Sensor DT-A 4143-997 5703102 201843 Protection cap 5243-998 5703102 201850 Protection cap 52

70-100 5703102 204851 Wireless receiver 60

74-010 5703102 002532 Dimmer - ceiling 6174-040 5703102 006561 Dimmer push button controlled 6374-210 5703102 003751 Electronic converter, 60 W 6674-212 5703102 003768 Electronic converter, 105 W 6674-213 5703102 003805 Electronic converter, 150 W 6674-214 5703102 006639 Electronic converter, 200 W 6674-224 5703102 201645 Electronic converter, 70 W 6774-227 5703102 201669 Electronic converter, 120 W 6774-230 5703102 201812 Electronic converter, flat 70 W 6874-231 5703102 203304 Electronic converter, flat 105 W 6874-290 5703102 002549 Power up dimmer 6274-360 5703102 203274 Minilux Control 20

Type EAN no. Description Page74-592 5703102 201461 4-push button, Opus 2874-593 5703102 201478 Push button, Opus 28

76-922 5703102 201737 Wireless push button 2-channel 5976-923 5703102 201744 Wireless push button 4-channel 59

77-050 5703102 204523 Luxstat control box 2977-910 5703102 205049 External IR-receiver 3077-920 5703102 204691 IR-remote 30

78-000 5703102 201348 Control, On/Off 2378-050 5703102 201355 Luxstat Control, DIN 2578-980 5703102 201775 Power Supply 3578-983 5703102 201379 Luxstat Power Pack 27

79-050 5703102 204592 Luxstat control wireless 3179-210 5703102 204844 Luxstat wireless cut-off control 3279-930 5703102 204639 Luxstat USB stick 3379-980 5703102 204660 Power supply - Control 3379-981 5703102 204745 Power supply - LED armatur 3379-990 5703102 204684 Luxstat basic software 3379-995 5703102 205063 Luxstat service software 33

Table of contentsOutdoor lighting control ....................................................................Page 3 Minilux day/night switches Stand-alone 230 V/12 V/24 V ................................................... 4-8

Control DIN 17,5 mm 230 V .................................................... 9-10

Control DIN 17,5 mm 230 V/display and built-in clock ....... 11-12

Control DIN 35 mm 230 V, with display ..................................... 13

Minilux movement sensors PIR Stand-alone sensor PIR, 230 V ............................................. 14-17

Minilux controls on/off Control 230 V DIN for 24 V movement sensors ................... 18-19

Minilux controls Dim Control 230 V DIN for 24 V movement sensors ........................ 20

Indoor lighting control .....................................................................Page 21 Movement Control On/Off Control On/Off 1 ch., DIN 35 mm, 230 V .................................. 22

Control On/Off 1-3 zones, DIN, 24 V .................................... 23-24

Luxstat control system Control DIM 1-3 zones, DIN, 24 V ........................................ 25-26

Power pack 3 ch., DIN, 230 V/24 V ........................................... 27

Push buttons for Luxstat ........................................................... 28

Control box DIM, 2 zones, 230 V .......................................... 29-30

Wireless control box DIM, 1-3 zone system ......................... 31-33

Power packs DIN 230 V/24 V, 2M with relay/4M without relay .................. 34-35

Movement sensors 24 V Sensor PIR 90° – ceiling/flush mounting ................................... 36

Sensor PIR 90° – wall/corner mounting (24 V-12 V) ............. 37-39

Sensor PIR 360° – ceiling/flush mounting ................................. 40

Sensor DT-A, PIR-A, UL-A, 360° – ceiling mounting ............ 41-43

Sensor PIR 360°/90°, built in relay – ceiling/wall .................. 44-46

Movement sensors 230 V Sensor PIR 200° – wall mounting .............................................. 47

Sensor PIR 360° – ceiling/flush mounting, IR-remote control ... 48

Sensor PIR 360° – ceiling mounting, 1 or 2 ch..................... 49-51

Parts & accesories Protection caps for movement sensors ..................................... 52

Electronic starters ...................................................................... 53

Light sensors Light sensor 24 V /0-10 V .......................................................... 54

Wireless Light sensor EnOcean ................................................. 55

Wireless transmitter EnOcean Movement sensor PIR 360°, 230 V/24 V – ceiling ................ 56-57

Movement sensor PIR 360°, battery-less – ceiling .................... 58

Push-buttons – Wall, battery-less .............................................. 59

Wireless receiver EnOcean Receiver box – Wall, 230 V ........................................................ 60

Dimmers Dimmer for built-in, 230 V ac – 1-10 V ................................. 61-63

Low voltage .......................................................................................Page 65 Electronic converters ......................................................................................................................... 66-68


The product data in this catalogue gives you thorough information about the products, their features, characteristics, dimensions and type numbers. Additional information about the products – including installation instructions – are available on www.servodan.com.

Intelligent lig

hting co

ntrol

Product data for intelligent lighting control

January 2010

Intelligentlighting control20

1001

05C

WH

·

Try

k: g

rafi

sk a

rbej

de

Stenager 5 DK-6400 Sønderborg Tel: +45 7442 4726Fax: +45 7442 [email protected]

You are most welcome to contact us for helpand guidance on our products and solutions.

Contact our distributor or visit us at www.servodan.com for more information on intelligent lighting control.

The support is near...

Documents

Product data for intelligent lighting control