CTA

: 149

533

1495

35

Digital ZwickRoell 3130 Hardness Tester to Shore Hardness Tester ZwickRoell 3130 connected to a PC

ApplicationsThese electronic hardness testers (Shore A, D, B, C,D0, 0, 00, 000) are suitable for the following applica‐tions:• determining hardness of plastics and rubber to ISO

7619-1, ASTM D2240, ISO 868 and NFT 51109.

It is essential for standard-compliant testing that speci‐mens have a plane-parallel contact surface of at least35 mm diameter and a material thickness of 6 mm.

Advantages and features• Hardness testing can be carried out in both vertical

and horizontal orientations, on-site or at a fixed loca‐tion. With digital hardness testers, the differing timesafter which measured values are to be determined(ISO specifications) can be input.

• Their low weight, compact dimensions and recharge‐able battery operation make them suitable for portableuse or for fixed laboratory testing (optional testdevice).

• The compression spring is integrated into the meas‐uring head in such a way that the contact ring allowsaccurate parallel positioning of the hardness tester onthe specimen, eliminating measurement errors.

• The end of the test time is indicated by visual andaudible signals and the measured value is automati‐cally shown on the display. This value can be trans‐mitted to a PC by means of the testing software viaRS232 interface for processing and archiving.

• The tester always displays the current measuredvalue. Up to 300 hardness values can be stored. If asignificant length of time elapses without a test beingperformed the instrument will switch to standbymode.

• The optional test device with load weight is suitablefor Shore A and D digital hand-held hardness testers(ZwickRoell 3130/31). It ensures accurate positioningof the hardness tester at right angles to the specimensurface, leading to a significant overall reduction inmeasured-value scatter. The reproducibility of the testprocedure is considerably improved by the eliminationof operator influence. Use of a test device is thereforerecommended for laboratory tests.

Product InformationDigital Shore hardness testers

PI 3

68 0

718

Technical data

Digital Shore hardness testerDescription Item number

Digital Shore A hardness tester (ISO 7619-1, ASTM D2240), including storage case, with RS232serial port and 9-pin PC cableRange of application: soft rubber, elastomers and natural rubber

320153

Digital Shore D hardness tester (ISO 7619-1, ASTM D2240), including storage case, with RS232serial port and 9-pin PC cableRange of application: hard rubber, rigid thermoplastics

320154

Digital Shore B hardness tester (ASTM D2240), including storage case, with RS232 serial portand 9-pin PC cableRange of application: harder elastomers

320155

Digital Shore C hardness tester (ASTM D2240), including storage case, with RS232 serial portand 9-pin PC cableRange of application: medium-hard elastomers

320156

Digital Shore A0 hardness tester (ISO 7619-1), including storage case, with RS232 serial port and9-pin PC cableRange of application: see Shore A with Shore A < 20

081987

Digital Shore D0 hardness tester (ASTM D2240), including storage case, with RS232 serial portand 9-pin PC cableRange of application: dense granular materials, textile fabrics

320157

Digital Shore 0 hardness tester (ASTM D2240), including storage case, with RS232 serial portand 9-pin PC cableRange of application: soft elastomers, textile fabrics

320158

Digital Shore 00 hardness tester (ASTM D2240), including storage case, with RS232 serial portand 9-pin PC cableRange of application: expanded rubber, sponge rubber, foam rubber and human skin

320159

Digital Shore 000 hardness tester, including storage case, with RS232 serial port and 9-pin PCcableRange of application: gels

320160

ZwickRoell 3139 L/c digital hardness tester incl. storage case, with RS 232 serial port and9-pin PC cable; indenter: ball, dia. 5 mm; range of application: for foam motor vehicle compo‐nents

371065

Optional accessories

Test device and verification deviceDescription Item number

Test device with 12.5 N load weight for Shore A (divided into 10 N + 2.5 N) for ZwickRoell 3130 320224

Load weight (37.5 N) for Item No. 320224 for Shore D (total load 50 N) 318883

Test device for Shore 00/000, total load 3.924 N 375919

Retaining ring for Shore test devices 045769

Verification device for analog hardness testers (3114-7, 3370-90) and digital hardness testers(3130/1) with weight set for Shore A

342743

Supplementary weights for Item No. 342743 for Shore D 342732

40 Shore test ring with baseplate in carry-case 342735

Product InformationDigital Shore hardness testers

We reserve the right to make technical changes in the course of ongoingdevelopment.

All data at ambient temperature.

Additional accessoriesDescription Item number

120° prism for rubber rollers 10 - 40 mm diameter (for ZwickRoell 2130 - 7) 342749

150° prism for rubber rollers 40-100 mm diameter (for ZwickRoell 2130 - 7) 342750

Replacement battery for 313X 371063

Test certificatesDescription Item number

Quality inspection certificate "O" as per DIN 55350, Part 18 No. 4.2.1, without specification ofcharacteristic values

342725

Quality inspection certificate "M" as per DIN 55350, Part 18 No. 4.2.2, with check on spring char‐acteristic; as per ISO 9000

342726

Quality inspection certificate "M" as per DIN 55350, Part 18 No. 4.2.2, with check on spring char‐acteristic, check on indenter, complete check of measurement travel distances for Shore hard‐ness 0-100; as per ISO 9000

342727

Quality inspection certificate "M" as per DIN 55350, Part 18 No. 4.2.2 for verification device (ItemNo. 342743), with check on test load Shore A

342734

Quality inspection certificate "M" as per DIN 55350, Part 18 No. 4.2.2 for verification device (ItemNo. 342743), with check on test load Shore A and D

342733

testXpert® III testing softwareDescription Item number

testXpert III Standard Test Program data connection via serial port 1035143

testXpert III Master Test Program data connection via serial port (3rd license) 1035512

Connecting cable for PC, RS232 C 011450

Product InformationDigital Shore hardness testers

We reserve the right to make technical changes in the course of ongoingdevelopment.

All data at ambient temperature.