Upload
dotuyen
View
238
Download
5
Embed Size (px)
Citation preview
Waterproofing EIFS Material & Tools Injection Material & Packers Building Material Adhesives Concrete Roof Tiles
Product Selection CatalogMiddle East
Injection Reinforced Pipe
Solvent Base PRimer
8
Damp proof Membrane
Damp proof membrane to provide a barrier to the passage of moisture or water from the exterior to the interior or from the ground to the structure.PACKAGING
BS 6398: 1983 (Class E).
10 MTR / ROll
NEOFLEX SBS.
Protects various substrates in wide range of waterproofing application
PACKAGING
1 X 10 MTR / ROLL
Technical specs.
Test Method Value
EN 1848-1 10,00-1%Length
EN 1848-1 1,00 -1%Width
EN 1849-1 4 mmThickness
EN 12311-1Elongation 45 / 45
Protects various substrates in wide range of waterproofing application
NEOFLEX APP.
1 X 10 MTR / ROLL
Technical specs.
Test Method Value
EN 1848-1 10,00-1%Length
EN 1848-1 1,00 -1%Width
EN 1849-1 4 mmThickness
EN 12311-1 40 / 40Elongation
PACKAGING
Technical specs.Compound SBS Modified
Surface Foil/Sand (top & bottom)
Thickness 4 mm
Nominal weight 4.4 – 4.6
Roll width 75 to 1000
Roll length 8 & 10 M
is a high quality environment friendly water based bituminous anionic emulsion.
It is free of solvent and exhibits excellent adhesion property. It is applied onto
various substrates (concrete, concrete blocks, bricks, foam concrete fiber and
NEO PRIME WB ,
• Solvent free, non-toxic.
• Environment friendly and non-flammable
• Binds dust that increases its adhesive property
• Improves adhesion / bonding of bituminous materials to thesubstrate
• Water-resistant
• Penetrates and seals porous surfaces
• Economical
FEATURES .
NEO PRIME SB .
is an excellent quality universal primer, manufactured from a special type of bitumen.
It is solvent based and commonly applied onto various substrates (concrete,
concrete blocks, bricks, foam concrete, fiber and steel substrates) to improve
bonding of bituminous products
• Binds dust, which increases its adhesive property.• Improves adhesion / bonding of bituminous materials to the
substrate.
• Water-resistant.
• Corrosion and chemical resistant.
• Penetrates and seals porous surfaces.
• Fast drying.
• Cost effective, no heating, thinning or mixing.
• Compatible with various substrates and structures.
FEATURES .
Polyurethen Liquid Membrane
Polyurethane base waterproofing membrane for roofs balcony
wet areas and below grounds applications
Balconies, terraces.
Baths (showers), kitchens and difficult access spots.
Flooring with pedestrian traffic.
Stairs, stadiums, tribunes.
Water channels and reservoirs.
Water Proofing
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
9
Sound Control/Anti-Fracture
Geotextile ( Sepration Layer )
Typically made from polypropylene or polyester, geotextile fabrics come
in three basic forms: woven (looks like mail bag sacking), needle punched
(looks like felt), or heat bonded (looks like ironed felt).
Visit TDS for Different GSM and Sizes
PVC WaterStop
It is recommended both in water retaining and water excluding structures
Areas of use include water reservoirs swimming pools water towers canals
culverts walls, underground basement, bridge abutments etc……
Internal Construction JointInternal Expension Joint Internal Construction Joint
External Expension Joint Externer Construction Joint
Welding Knife / Splicing Iron .
Water Proofing
10
Waterproofi ng
Torch For Waterproofing Membrane.
Technical Specification.
Polyurethyne Injection Material.
Use for sealing of movable and non movable cracks
Injection Packers.
Use for injection of material into cracks
Available in Different Sizes
Aluminium & Mettalic
Neo Injection Hose.
RRECOMMENDED FOR:
Neo Injection Hose is recommended for use in construction joints in all structures,
• water retaining structures
• tunnels and basements
• buildings, bridge decks and other similar structures
which need to be injection grouted to waterproof them, such as
P-U Tube ( Injection Flange Hose )
Polyurethane Tube(P U Tube) that are used in the pneumatic equipment
and industry robot for various air tools and for controlling lubricating oil system.
Injection Hose Connectors.
Streight Connector L Shape Connector
Water Proofing
Waterproofi ng
Neo Fiberglass Mesh.
Glass fibre mesh fabrics combined with specially designed mesh surface treatments
can be used in a wide range of applications.
is mainly used as one component of external thermal insulation systems.NEO Mesh
A high quality synthetic coating on the glass yarn protects our mesh against alkaline
influences from the adhesives and other materials that are used.
Properties
High mechanical strength
Excellent dimensional stability
Compatible with all major facade systems
Pvc Corner Beads.
PVC Corner bead with fiberglass mesh can effectively solve the problems of EIFS
such as the positive angle unstraight, unsmooth, and the angle of the wall easily to be
damaged Using the corner beads, no need to use steel panel,
Available in Different Sizes And Weights as per Requirement.
Lenght = 2.5 Mtrwidth = 25 mm x 25 mmMesh Apperture = 10 mm x 10 mm
Insulation Anchors
Insulation Anchors are quick and easy to use, will attach many
dissimilar substrates, and can be easily disassembled.
Dia = 8 mm , 10 mmLengths : 60 mm , 70 mm , 90 mm ,110 mm , 140 mm , 180 mm , 200 mm , 220 mm240 mm , 280 mm , 300 mm , 350 mm
Trowels
EIFS Tools & Material .
12
Baker Rod ( Closed Cell Backer Rod )
Closed-Cell Backer-Rod is a closed-cell, polyethylene foam jointfiller
and backing for elastomeric sealants. Its resilience accommodates
dynamic joints. Backer-Rod is a reticulated closed-cell
polyethylene foam joint-filler and backing for sealants. It compresses
easily to accommodating joints of varying widths.
Density (nominal)Tensile StrengthCompression DeflectionWater AbsorptionWater AbsorptionTemperature Range
2.0 lbs/cu. ft.50 PSI5 PSI @ 25%0.03 gm/cc0.02% by volume-90ºF to 210ºF
ASTM-D-1622ASTM-D-1623ASTM-D-1621ASTM-C-1016ASTM-C-509
PROPERTY VALUE TEST METHOD
PHYSICAL PROPERTY ANALYSIS
Welded Mesh
Welded wire mesh is designed for building fencing and in other infrastructural
purposes. It is a corrosion resistant wire mesh that is largely used in structural
building. It is also available in different forms like rolls and panels.
Available in Different Thickness = 4 mm , 6 mm , 8 mm
as per BS 4483: 1998 standards
Glazing
ITPBackerRod
ITPBackerRod
ITPBackerRod
Glass
Sealant
ExpansionJoints
Building Material .
Building Material .
Bitumen Fiber Joint Filler Board
Suggested Application Details for Typical Joints
3-D DIAGRAM
Jolly Bitulex is broughtflush with the concreteslab and extends fulldepth of the slab, placedapproximately ¾ of aninch below the surfaceof the concrete slab. Asuitable sealant isapplied either at the topor bottom of the slab toclose the joint againsthydrostatic pressure. Thedowel bar is used topreserve alignment ofadjacent sections ofconcrete slab. JollyBitulex is fabricated toreceive dowel bars andthe entire joint assemblyis placed in positionbefore pouring concrete.
2-D DIAGRAM (SIDE-VIEW)
APPLICATIONS: Expansion joint filler strips in all concrete traffic surfaces like highways,
airport, runways and streets. Expansion joint fillers in driveways, aprons, pavements, curbs, gutters
and other concrete paving work. Expansion joint fillers in reinforced concrete structures like piers,
JOLLY BITULEXconfirms to the following required standards ofexpansion joint fillers:• ASTM- D. 1751• B.S. 6093• IS 1838
PHYSICAL PROPERTIESthat no other expansion joint fillers possesCOMPRESSIONJolly Bitulex when initially subjected to a loadbetween 689 to 5171 kPa(or 100 to 750 PSi) inorder to compress it by 50% of its originalthickness, it shows a loss of not more than 0.1 to0.2 % by weight.
(Permitted : less than or equal to 3% by weight).
EXTRUSIONJolly Bitulex when compressed to 50% of itsthickness with 3 edges restrained, it shows anextrusion of not more than 1 to 2mm on its freeedge. (Permitted : less than or equal to 6.4mm)
RECOVERYJolly Bitulex when compressed to 50% of itsthickness, it is observed that it recovers to 80-85%of its original thickness, within 10 minutes after theload is removed. Cane Fibre improves toughnessand recovery properties. (Permitted : at least 70%or higher)
UNAFFECTED BY TEMPERATURE CHANGES
Jolly Bitulex expansion joint filler holds its shapewithout appreciable dimension change whenexposed to temperature extremes. It does not getsoft at higher temperatures nor brittle at lowertemperatures.
retaining walls, and lateral supports like abutments.
Expansion joint fillers are used against existing or betweenadjacent constructions and insets in concrete paving likedrains, manholes, etc.Industrial Flooring.
Various other internal finishes, flat works and concretefloors according to the state of art and local regulations
SIZES
THICKNESS
Standard sheet sizes:7.3’ x 4 ft - 2200 x 1220mm8 x 4 ft - 2440 x 1220mm (Other sizes available on requests)
10 - 12 - 18 - 25 mm
BITUMEN CONTENT
QUALITY GUARANTEE
35% Bitumen Content as per ASTM and other establishedstandard, we also supply 10-20% Bitumen content as percustomers’ requirements.
Strict monitoring by our on site quality control engineer
Whole Sale & Import Items
We may take Liberty to introduce ourself as one of the biggest Whole saler and Impoter of Below Building materials which we keep enough quantity in stock
Cover All Coir Geotextile Binding Wire .
Tarpoline Green Shed NetGloves
Polyproplyne Fiber
We supply high quality prepared additives based on chemically surface treated
100% Virgin High Tenacity Polypropylene Fibers of graded lengths for cements,
mortars (plasters) and concretes manufactured from highest quality raw material.
Building Material .