Components With Experience

S h e e t M e t a l P r o c e s s i n g

Production QualitySetting The Standard.

2

1

D r y M a t e r i a l s h o p p e r s

A place for optimal raw material handling.

Practical manufacturing solutions.

The know-how in Reimelt's sheet metal manu-facturing is evident in every detail. For exam-ple the transition from a cylindrical hopperpiece to a conical piece is designed with aradius. This assures an optimal product-flowand ease of cleaning of the hopper.

Reimelt adheres strictly to the EHEDG orga-nization guidelines: welded seams in contactwith product are always ground flat. Hoppercorners are designed to be without weldedseams or bolted connections and have a radi-us of over 3 mm.

Reimelt has many years of experience in theproduction of key components for the indu-stry. This is also apparent in the production of containers and vessels. Our standard pro-duct range includes the multipurpose vessels,container systems for automatic or manualhandling or storage hoppers, with and with-out discharge and metering systems.

The Reimelt construction and manufacturingcompetence is apparent with the multipur-pose vessels, for example the dry solids mixerfor batch operations. It is a single-shaft verti-cal mixer. Its slowly rotating spiral tool assu-res a gentle, efficient mixing without energyinput into the product.

Picture 1: Hopper with agitator to move

and aid in discharging the product

Picture 2: Intermediate storage

hopper with filter

and rotary valve

4

3

L i q u i d t a n k s

Picture 3: Bag-dump

Picture 4: Pressure-resistant scaling tank

for liquids

CIP - for a clean, clear solution.

As a member of the EHEDG organization andthrough the close collaboration with producersof cleaning agents and systems, Reimelt offersstate-of-the-art CIP technology (Cleaning inPlace). Whether dry materials or liquids:

All information about the CIP-compatible hop-pers and tanks can be obtained from Reimelt'sengineering team.

Construction for improved flow of materials.

or atmospheric operation. A further, moreessential part of our production portfolio isthe manufacturing of custom designs accor-ding to the customer's requirements.

Reimelt offers an extensive product rangethat fulfils all your needs concerning thehandling of liquids. In addition to the Reimeltmodular system, we offer tanks with a singlewall, jacketed tanks and tanks for pressurized

job order production. Preformed pieces areindividually manufactured according to thecustomers requests. All that you have to deliver is a construction drawing.

Job order production as an additional service.

In addition to hopper manufacturing basedpurely on system design, Reimelt crossesbranch boundaries as a metal fabricator for

Perfection in detail.

Preformed pieces, accessories and add-oncomponents for the material handling systemare manufactured not only for within thescope of a complete proposal but also forsingle orders. Also here there are no limits setto the customer's individual requirements.

P r e f o r m e d p i e c e s

6

5

S u r f a c e F i n i s h

Know-how for shining results.

The excellent surface quality of Reimeltmetal products begins before processing:Through the utilization of plastic coveredsheet metals, damages to the surfaces,e.g. by scratches, are almost impossible.

The most varied surface processes are availa-ble for our customers:

• Bead-blasting• Super-finishing• Pickling• Manual polishing• Machine polishing• Electro-polishing• Coating

Picture 5: Filter housing

Picture 6: Electro-polished transport

and storage hopper

Electro-polished surfaces with a surface roughness of 0.05 to 0.15 µm (Basic material1.4301 IIIc) meet the highest standards forhygiene and appearance. And with both coatings, PTFE or Poly-Seal, there is no measurable surface roughness.

7

8

Behä

lter/

2007

1.E

Comprehensive experience and the use of thecutting-edge technology is the basis for extra-ordinary manufacturing quality. Reimelt metalproducts are recognizable at first glance - bythe perfectly executed surfaces and weldingseams.

Round hoppers are manufactured with aninert-gas welding unit with an optically gui-ded welding process, which assures a techni-cally and optically outstanding welded seam.The production of cylindrical and conical hop-pers is achieved through use of a linear wel-ding unit. Special metal-sheet forming unitswith conical rollers enable a gentle to the sur-face manufacturing of cones.

Reimelt sets the standard:Get set for ”Made in Germany”.

Picture 7: Optically-guided inert-gas

welding unit

Picture 8: Press with conical rollers for

coneformed hoppers or hopper

components

Reimelt GmbH

Messenhäuser Straße 37-45 D-63322 Rödermark, Germany

Tel. (49) 0 60 74 / 691- 0Fax (49) 0 60 74 / 60 31

info@reimelt.de | www.reimelt.de

Manufacturing competence - the sum of experience and technology.

M a n u f a c t u r i n g