Programme of mDa2016author underlined presenting author

Thursday 30 June 2016

8:45 mDa2016 opening (room a101, also called ‘auditorium’)

Session 1a – Welding

(Chair: GA Taber, AA Fernandes)

Session 1B – Polymers

(Chair: AJ Brunner)

Session 1C – metals

(Chair: SB Leen)

room a101 (auditorium) room B032 room B035

9:00 Explosive Welding of Aluminium to Copper: Structural and Morphological Analysis of Partial Overlap Welds (mDa16_135)

I Galvão (University of Coimbra, Portugal), RM Leal, R Mendes, JB Ribeiro, A Loureiro

Novel Shape Memory Thermosets with Enhanced Mechanical Properties for Actuator-like Applications (mDa16_106)

A Belmonte, A Fabregat-Sanjuan, X Fernández-Francos, S De la Flor (Universitat Rovira i Virgili, Spain)

An Experimental Approach to the Thermomechanical Characterization of a NiTiCu Shape Memory Alloy Using Strain Gauges (mDa16_91)

A Fabregat-Sanjuan (Universitat Rovira i Virgili, Spain), F Ferrando, S De la Flor

9:20 A Numerical Illustration of the Fusion Bonding Process (mDa16_70)

L Jusufi (Technical University Braunschweig, Germany), J Weimer, K Lippky, S Kreling, K Dilger

Protective UV-cured Polymers Functionalized by Graphene (mDa16_92)

M Periolatto (Free University of Bozen-Bolzano, Italy), P Russo Spena, M Sangermano

Wear Studies on Nicrofer C263 and Prediction of Wear Using Artificial Neural Network (mDa16_163)

PSC Bose (National Institute of Technology, India), K Jawale, CSP Rao

9:40 Local Mechanical Characterization of MIG Welded TWIP/TRIP Tailored Blanks (mDa16_86)

P Russo Spena (Free University of Bozen-Bolzano, Italy), L Cortese, F Nalli, K Májlinger

Evaluation of Gelatin Electrospun Fibers Crosslinked with 1,4 – butanediol Diglycidyl Ether for Skin Regeneration (mDa16_101)

JR Dias, PL Granja (Universidade do Porto, Portugal), PJ Bártolo

Experimental and Theoretical Analysis of the Formability Limits by Wrinkling in Sheet Metal Forming (mDa16_52)

JPG Magrinho (IDMEC, Portugal), CMA Silva, MB Silva, PAF Martins

10:00 On The Use of Electromagnetic Pulses for the Weld of Dissimilar Materials (mDa16_156)

I Oliveira (INEGI, Portugal), A Cavaleiro, A Reis, G Taber

Characterization of a Brittle Epoxy Toughened with Micro Cork Particles: Effect of Size, Amount and Surface Treatment (mDa16_59)

AQ Barbosa (INEGI, Portugal), LFM da Silva, J Abenojar, M Figueiredo, A Öchsner

10:20 Vaporizing Foil Actuated Welding (mDa16_116)

GA Taber (The Ohio State University, USA), BC Liu, A Vivek, GS Daehn

Industrial and Natural Waste Transformed into Raw Material (mDa16_90)

C Costa, M Monteiro, B Rangel (FEUP, Portugal), JL Alves

10:40-11:00 Coffee BreaK (room under the auditorium)

Session 2a – adhesive Bonding

(Chair: RD Adams, RJC Carbas)

Session 2B – Ceramics

(Chair: JL Alves)

Session 2C – Design

(Chair: RM Natal)

room a101 (auditorium) room B032 room B035

11:00 Effect of Uncertainties on the Strength of Adhesively Bonded Joints (mDa16_145)

N Carrere (Safran Composites, France), J Le Pavic, D Thevenet, E Martin, D Leguillon

Influence of Mold Material on Ceramic Disk Dimensions in Low Pressure Injection Molding (mDa16_20)

CA Costa (University of Caxias do Sul, Brazil), CR Altafini, FR Visioli, AP Baccin

Evaluation of the Stress Situation of Stator Bars in Thermal Cycle Tests as Basis for a Delamination Study (mDa16_26)

HKR Pothukuchi (Polymer Competence Center Leoben, Austria), PF Fuchs, G Pinter

11:20 Evaluation of Surface Treatment Methods for Adhesive bonding of Fiber Reinforced Polypropylene (mDa16_71)

Y Kuranaga (Tokyo Institute of Technology, Japan), T Ohnishi, H Okamoto, Y Sekiguchi, C Sato

Computational Studies of the Vacancies in Hydroxyapatite (mDa16_55)

VS Bystrov (IMPB RAS, Russia), RC Pullar, S Kopyl, C Piccirillo, J Coutinho

Mechanical Design of Buckling Beams for Low-stiffness Elastic Isolators (mDa16_29)

GS Mammano, E Dragoni (University of Modena and Reggio Emilia, Italy)

11:40 Comparison of Classic Type Lap Joints and S-Type Lap Joints Exposed to Tensile Loads (mDa16_17)

Ş Çitil (Adıyaman University, Turkey)

Modification of Physical Properties of Calcium-Copper-Titanate by Doping with Zinc (mDa16_96)

J Plewa, D Czekaj, A Lisińska-Czekaj, B Garbarz-Glos (Pedagogical University, Poland), W Bąk, T Juestel

Mechanical Characterization and Modelling of an Innovative Composite Material for Railway Applications (mDa16_46)

A Genovese (University of Naples, Italy), M Russo, S Strano

12:00 Evaluation of Analytical and Numerical Techniques for the Strength Prediction of Single-lap Bonded Joints with Different Adhesives (mDa16_68)

CCRG de Sousa, RDSG Campilho (ISEP, Portugal), EAS Marques, LFM da Silva

Characterization of WC Powders Synthesized Mechano-chemical Alloying (mDa16_100)

NÖ Aytekin (University of Istanbul Technical, Turkey), DB Ağaoğulları, ML Öveçoğlu

Optimization of Seat Foam Static Characteristics to Improve Seating Comfort (mDa16_51)

JH Bang (Kangwon National University, Korea), CA Lee, HS Kim, HY Kim, HJ Kim, KY Choi

12:20 The Production-related Influence of Iron Oxides on Steel Surfaces on the Adhesion of Fusion-bonded Hybrid Structures (mDa16_85)

T Reincke (Technische Universitat Braunschweig, Germany), S Kreling, K Dilger

Complexity of SrSi2O2N2:Eu Phosphor Formation Via the Solid State Reaction (mDa16_154)

D Michalik, B Adamczyk, M Sopicka-Lizer (Silesian University of Technology, Poland), J Barzowska, K Szczodrowski, M Grinberg

Design of a Composite System for Protection against Multiple Impact (mDa16_28)

MD Thouless (University of Michigan Ann Arbor, USA), EM Arruda, T Rahimzadeh

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016

12:40 Generalized Stress Intensity Factor in Single Lap Adhesive Joints with Different Configurations (mDa16_147)

A Akhavan-Safar (Iran University of Science and Technology, Iran), S Rastegar, MR Ayatollahi, LFM da Silva

13:00-14:00 LUNCH BreaK (room under the auditorium)

Session 3a – Composites

(Chair: N Carrere, R Campilho)

Session 3B – machining

(Chair: JL Alves)

Session 3C – metals

(Chair: SB Leen)

room a101 (auditorium) room B032 room B035

14:00 The Effect of Adhesive Modification and Surface Drying to Prevent the Consequences of Prebond Moisture on Structural Adhesive Bonds of Thermoplastic Composites (mDa16_78)

AT Bochtler (Volkswagen AG, Germany), NR Behrendt, S Suellentrop, N Ranke, K. Dilger

Investigation of Surface Roughness and Tool Wear in End Milling of Al7075-SiC Co-Continuous Composite (mDa16_88)

AS Prasanth (PSG College of Technology, India), R Ramesh, A Madhu

The Influence of Face Coat Material on Reactivity and Fluidity of the Ti6Al4V and TiAl alloys During Investment Casting (mDa16_97)

RL Neto (INEGI, Portugal), TP Duarte, JL Alves, TG Barrigana

14:20 Recycling of Fibre Reinforced Plastics (mDa16_18)

RD Adams (University of Oxford, UK)

A Review of the Machinability of Carbon Fiber Reinforced Polymer Composites (mDa16_24)

H Caliskan, D Ozkan (Kastamonu University, Turkey)

Crystal Plasticity Modelling of Effect of Grain Size on High Temperature Cyclic Response of a Tempered Martensite Ferritic Steel (mDa16_105)

M Li (NUI Galway, Ireland), RA Barrett, DF Li, PE O’Donoghue, NP O’Dowd, SB Leen

14:40 Design and Testing of Ceramic-aluminium Dual Adhesive Joints for High Temperature Applications (mDa16_60)

EAS Marques (INEGI, Portugal), M Flaviani, M Banea, C Sato, LFM da Silva

Machinability of an Aluminum Cast Alloy using PCD Tools for Turning (mDa16_157)

RB Soares, AP Jesus, RJL Neto (INEGI, Portugal), PAR Rosa, M Machado, A Reis

The Influence of Microstructure on Mechanical Behaviour for Dual Phase Steels (mDa16_113)

R Amaral (INEGI, Portugal), AD Santos, AB Lopes

15:00 Flaky and Fullerene-like WS2 Nanoparticles as Tribologic and Toughening Additives for Epoxy (mDa16_102)

D Haba (Empa, Switzerland), A Hausberger, AJ Brunner

Investigation and Application of Fe-Co-Cu Based Diamond Cutting Tools with Different Bronze Content Used in Marble Production (mDa16_36)

B Bulut (Istanbul Technical University, Turkey), O Tazegul, M Baydogan, ES Kayali

15:20 Graded Adhesive Joints by Nanoparticles Reinforcement (mDa16_76)

RJC Carbas (INEGI, Portugal), LFM da Silva, LFS Andrés

15:40 Cork and Renewable Energy (mDa16_19)

L Gil (Direção Geral de Energia e Geologia, Portugal)

16:00-16:20 Coffee BreaK (room under the auditorium)

Session 4a – metals

(Chair: PT de Castro)

Session 4B – Tribology

(Chair: J Seabra)

Session 4C – Natural fiber Composites

(Chair: J Ribeiro, L Queijo, J Rocha)

room a101 (auditorium) room B032 room B035

16:20 The Effect of Powder Size on Boronizing of Ductile Iron (mDa16_37)

F Unal (University of Istanbul Technical, Turkey), A Topuz

Physical Modelling of Tire Wear for the Analysis of the Influence of Thermal and Frictional Effects on Vehicle Performance (mDa16_33)

F Farroni (University of Naples, Italy), A Sakhnevych, F Timpone

Machining of Flax Fibers Reinforced Polymer Composite (mDa16_16)

J Delahaigue, JF Chatelain (Ecole de Technologie Supérieure, Canada), G Lebrun

16:40 Characterisation of a Nano-Strengthened 9Cr Steel for High Temperature Flexible Operating Conditions (mDa16_49)

EM O’Hara (NUI Galway, Ireland), RA Barrett, SB Leen

Development of the Fundamental Understanding of Leading Edge Erosion (mDa16_41)

KP Dyer (ORE Catapult, UK)

Green Recoating of Cotton Fiber by Different Starched Methods (mDa16_132)

JRN Macedo, DB Rocha (Federal University of ABC, Brazil), DS Rosa

17:00 An Experimental and Numerical Characterisation of Materials for Use in Biomass Co-firing (mDa16_65)

CP O’Hagan (NUI Galway, Ireland), SB Leen, RFD Monaghan

Improvement of Wear Resistance of Carbide Cutting Tools using Nanolayer AlTiN/TiN Hard Coating in Face Milling of Inconel 718 Superalloy (mDa16_25)

H Caliskan, B Kursuncu, P Panjan, D Ozkan (Kastamonu University, Turkey)

Coffee Powder Reused as a Composite Material (mDa16_123)

V Canavarro, B Rangel, JL Alves (FEUP, Portugal)

17:20 Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy After Hot Deformation (mDa16_67)

M Wojtaszek (AGH University of Science and Technology, Poland), T Śleboda, G Korpała

Influence of Surface Preparation on Surface Topography and Tribological Behaviours (mDa16_74)

A Dzierwa (Rzeszow University of Technology, Poland)

Experimental Study on Effect of Tool Geometry on Hole Quality in Drilling of CFRP/Ti6Al4V Stacks (mDa16_80)

S El Bouami (University of Picardie Jules Verne, France), M Habak, G Franz, R Velasco, P Vantomme

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016

17:40 A Physically-based Creep Damage Model for 9Cr Steels Incorporating the Effects of Multiple precipitate Types (mDa16_73)

CÓ Murchú (NUI Galway, Ireland), RA Barrett, SB Leen, PE O’Donoghue

18:00 Characterization of Thermal Parameters and Microstructure of a Horizontally Solidified Sn-Sb Solder Alloy (mDa16_15)

OL Rocha (Science and Technology of Pará - IFPA, Brazil), TA Costa, MD Filho, A Garcia

19:00 Poster session and reCePTIoN (room under the auditorium)

metals

Poster 1 Sustainable Heusler Alloy Synthesized by Multi-Target Sputter Deposition (mDa16_42)

S Kurdi (University of Cambridge, UK), ZH Barber, AL Greer

Poster 2 Positron Annihilation Studies on Nanocrystalline Copper Thin Films Doped with Nitrogen (mDa16_72)

PM Gordo (University of Coimbra, Portugal), MF Ferreira Marques, MT Vieira

Ceramics

Poster 3 Processing and Crystal Structure of Strontium Bismuth Niobate-Based Ceramics (mDa16_94)

D Czekaj, A Lisińska-Czekaj, M Rerak, B Garbarz-Glos (Pedagogical University, Poland), W Bąk

Poster 4 Dielectric Behaviour of 2-Layered Aurivillius-Type Ferroelectric Ceramics (mDa16_95)

D Czekaj, A Lisińska-Czekaj, M Rerak, B Garbarz-Glos (Pedagogical University, Poland), W Bąk

Poster 5 Comparison of Physicochemical Properties of TiO2 Layer Deposited on 316 LVM Steel by Sol-gel and ALD Methods (mDa16_158)

W Walke (Silesian University of Technology, Poland), M Basiaga, A Hyla

Poster 6 Design of Nanocrystalline Cemented Carbides with High Hardness (mDa16_109)

MJ Kupczyk (Poznan University of Technology, Poland)

Poster 7 Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides (mDa16_110)

MJ Kupczyk (Poznan University of Technology, Poland), P Siwak, J Komolka

Poster 8 Comparative Estimation of Properties of Cutting Edges made of Conventional and Sintered High Speed Steels (mDa16_111)

MJ Kupczyk (Poznan University of Technology, Poland), J Komolka

Poster 9 Extraction Temperature of Core Inserts in Ceramic Low Pressure Injection Molding (mDa16_21)

CA Costa (University of Caxias do Sul, Brazil), CR Altafini, WB Souza, R Coletto

Poster 10 Probing of Oxygen Vacancies in BaTiO3 Powder and Single Crystal by Micro-Raman Scattering (mDa16_82)

H Fukushima (National Defense Academy, Japan), H Oka, H Funakubo, H Uchida, H Moriwake, H Shima, K Nishida

Poster 11 Dielectric Spectroscopy Studies of Mixed Oxide Method-Derived Strontium Bismuth Niobate Ceramics (mDa16_112)

B Garbarz-Glos (Pedagogical University, Poland), D Czekaj, A Lisińska-Czekaj, M Rerak, W Bąk

Poster 12 Characteristics of SiO2 Layer Deposited by ALD Method on 316 LVM Stainless Steel Used in Cardiology (mDa16_159)

M Basiaga (Silesian University of Technology, Poland), W Walke, M Staszuk, W Kajzer

Natural fiber Composites

Poster 13 Cellulose Nanowhiskers Obtained From Waste Recycling of Paper Industry (mDa16_134)

AG Souza, DB Rocha (Universidade Federal do ABC, Brazil), DS Rosa

Smart material Design

Poster 14 Sustainable Smart Materials for Magnetostrictive and Magnetoelectric MEMS Application (mDa16_124)

W Huettenes (University of Cambridge, UK), ZH Barber

Poster 15 Novel Magnetically Actuated Thermal Switches (mDa16_61)

JB Puga, BD Bordalo, DJ Silva, MM Dias, JH Belo, JP Araújo, AM Pereira, J Ventura, JCRE Oliveira (FEUP, Portugal)

Design

Poster 16 Design of the Valve Actuation Mechanism of a Naturally Aspirated Four-Stroke Spark Ignition Internal Combustion Engine (mDa16_137)

FJQC de V. e Brito, P de F.V. Carvalheira (University of Coimbra, Portugal)

adhesive Bonding

Poster 17 Effect of Water on the Behaviour of Adhesives Modified with Thermally Expandable Particles (mDa16_34)

N Rolim (CEFET/RJ, Brazil), MD Banea, LFM da Silva, RJC Carbas, AQ Barbosa, S de Barros

Poster 18 Adhesive Joints with Hybrid Laminates Aluminium-CFRP (mDa16_44)

RJC Carbas, MP Palmares (FEUP, Portugal), LFM da Silva

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016

Poster 19 Fatigue Strength of Friction Stir Weld-bonded Joints (mDa16_89)

DFO Braga, J Santos (INEGI, Portugal), J Fortunato, PMGP Moreira, V Infante, LFM da Silva

Poster 20 Friction Stir Weld-bonding Joints Strength under Impact Loading (mDa16_77)

DFO Braga (INEGI, Portugal), J Fortunato, SC Constantino, PMGP Moreira, V Infante, LFM da Silva

Poster 21 eXtended Finite Element Method Applied to the Strength Prediction of Double-lap Bonded Joints (mDa16_69)

TF Santos, RDSG Campilho (ISEP, Portugal)

Poster 22 Impact and Damping Behavior of Composite Adhesive Joints (mDa16_150)

HAM Araujo (FEUP, Portugal), JJM Machado, EAS Marques, LFM da Silva

Poster 23 Use of Master Curves Based on Time-temperature Superposition to Predict Creep Failure of Aluminium-glass Adhesive Joints (mDa16_151)

EAS Marques (INEGI, Portugal), RJC Carbas, F Silva, LFM da Silva

Poster 24 Influence of the Weatherability on the Fracture Envelope of an Automotive Adhesive Joint (mDa16_152)

P Fernandes (FEUP, Portugal), G Viana, M Costa, MD Banea, LFM da Silva

Poster 25 Mode I Determination of CFRP as a Function of Temperature and Strain Rate (mDa16_48)

JJM Machado (INEGI, Portugal), EAS Marques, RDS Campilho, LFM da Silva

Poster 26 Static and Fatigue Assessment of the Mixed-Mode Behaviour of Adhesively Bonded Joints (mDa16_168)

MB Ferreira (FEUP, Portugal), R Carbas, M Costa, G Viana, EAS Marques, LFM da Silva, E Yokoi, S Nakada, T Furusawa

Welding

Poster 27 Numerical Investigations by FEM of the Influence of the Thermal Properties on Residual Stresses in a Multi-pass Butt-welded Joint (mDa16_146)

R Sepe (Second University of Naples, Italy), F Caputo

additive manufacturing

Poster 28 Development of Personalized Insoles with Additive Manufacturing (mDa16_130)

RJ Pinto, L Lopes, JL Alves, T Duarte (FEUP, Portugal)

Poster 29 Low Cost Filament Extruder Fabrication for 3D Printing (mDa16_128)

RK Kakati, IA Ferreira, L Santana, JL Alves (FEUP, Portugal)

Poster 30 Direct Digital Manufacturing: A Challenge to the Artistic Glass Production (mDa16_161)

I Sousa, R Felismina, A Mateus (Polytechnic Institute of Leiria, Portugal), C Malça

Poster 31 A Comparison Between Additive, Formative and Subtractive Manufacturing on the Fabrication of a Ti6Al4V Hip Prosthesis (mDa16_162)

M Couto, M Machado, A Cavaleiro, R Neto (INEGI, Portugal), A Reis, JL Alves

friday 1 July 2016

Session 5a – advanced Discretization Techniques

(Chair: J Belinha, C Roque)

Session 5B – Natural fiber Composites

(Chair: J Ribeiro, L Queijo, J Rocha)

Session 5C – Design

(Chair: MD Thouless, D Castagnetti)

room a101 (auditorium) room B032 room B035

9:20 Analysis of Layerwise Plates by Radial Basis Functions-Finite Differences Method (mDa16_35)

AJM Ferreira (FEUP, Portugal), AMA Neves, CMC Roque

Mechanical Characterization of Cytisus Scoparius Natural Fibre – a Preliminary Study (mDa16_120)

L Queijo (Polytechnic Institute of Bragança, Portugal), J Rocha, JE Ribeiro

Design of the Piston of an Internal Combustion Engine for a High Efficiency Vehicle (mDa16_136)

AJG de O Bizarro, P de FV Carvalheira (University of Coimbra, Portugal)

9:40 Differential Evolution Optimization for RBF-FD Meshless Method (mDa16_58)

CMC Roque (INEGI, Portugal), PALS Martins

Mechanical Properties Comparison of Autochthonous Natural Fibres Reinforced Polyester Composites: Flax and Hemp (mDa16_121)

J Rocha (Polytechnic Institute of Bragança, Portugal), L Queijo, JE Ribeiro

The Depletion of ZDDP Additives within Marine Lubricants and Associated Cylinder Liner Wear in RNLI Lifeboat Engines (mDa16_47)

M Anand, M Hadfield (Bournemouth University, UK), B Thomas, R Cantrill

10:00 The Elasto-static Analysis of Composite Plates Considering High-order Shear Deformation Theories (mDa16_108)

DES Rodrigues (INEGI, Portugal), J Belinha, AL Araújo, AJM Ferreira, LMJS Dinis, RM Natal Jorge

Factors Optimization to Improve the Tensile and Flexural Properties of Short Fibre Non-woven Hedgehog Chestnuts Spines Reinforced Polyester Composites (mDa16_119)

JE Ribeiro (Polytechnic Institute of Bragança, Portugal), J Rocha, L Queijo

Modelling of Soft Tissues with Damage (mDa16_155)

JPS Ferreira (INEGI, Portugal), MPL Parente, R Natal

10:20 The Biomechanical Bone Tissue Response Due to the Insertion of a Femoral Stem: a Meshless Study (mDa16_114)

J Belinha (INEGI, Portugal), MMA Peyroteo, S Vinga, LMJS Dinis, RM Natal Jorge

10:40-11:00 Coffee BreaK (room under the auditorium)

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016

Session 6a – Smart material Design

(Chair: A Spaggiari, D Castagnetti)

Session 6B – machining and additive manufacturing

(Chair: RL Neto)

Session 6C – metals

(Chair: MF Vieira)

room a101 (auditorium) room B032 room B035

11:00 Design and Assessment of an Electromagnetic Energy Harvester Based on Slotted Disc-Springs (mDa16_39)

D Castagnetti (University of Modena and Reggio Emilia, Italy), F Dallari

FE Modal and Harmonic Analysis of Micro Drill with Ultrasonic Horn (mDa16_104)

A Muddu (National Institute of Technology, India), MR Khan, A Shyamnarayan

Evaluation of the Ductile-to-brittle Transition Temperature in a Thermally Sprayed CoNiCrAlY Coating by Small Punch Multi-step Loading Tests (mDa16_38)

H Chen (University of Nottingham Ningbo China, China), J Yang, XL Xiao

11:20 Development of a Driveshaft Torque Transducer for Low-cost Structural Health Monitoring of Off-highway Vehicles (mDa16_45)

A Spaggiari, D Castagnetti, L Fornari, E Dragoni, N Golinelli (University of Modena and Reggio Emilia, Italy), G Gualdi, A Brunazzi

Optimization of Geometric Quality in 5 Axis Machining of Curved Surfaces in an EN-AW-7075 alloy by Taguchi Method (mDa16_125)

SD Castellanos (INEGI, Portugal), K Castro, LJ Segura, JL Alves

Influence of Hydrostatics Burnishing Strategy on the Surface Roughness of the X38CrMoV5-1 Steel (mDa16_62)

S Swirad (Rzeszow University of Technology, Poland), D Wydrzynski

11:40 SMA/GFRP High Damping Laminate Thin Plates (mDa16_57)

A Lo Conte (Politecnico di Milano, Italy), P Haghdoust

Formulations Development of Plaster Mixtures for Additive Manufacturing (mDa16_127)

DE Caetano, JL Alves (FEUP, Portugal), RL Neto, TP Duarte

Development of a New Hybrid High Strength Electric Cable (mDa16_8)

O Carvalho (University of Minho, Portugal), FS Silva, G Caldeira

12:00 Development of an Effective and User-friendly Numerical Framework for the Simulation of Complex Smart Material Components and Devices (mDa16_79)

E Boatti (University of Pavia, Italy), M Ferraro, G Scalet, F Auricchio

Influence of Post-Processing in 3D Binder Jetting Technology (mDa16_126)

EM Ocaña (Universidad de las Fuerzas Armadas–ESPE, Ecuador), JF Alves, RJ Neto

Effect of Strain Partitioning on Strain Rate Dependency of Tensile Behavior of a TRIP-aided Duplex Stainless Steel (mDa16_22)

JY Choi, HN Han, K-T Park (Hanbat Nat’l Univ., Rep. of Korea)

12:20 Geometry Optimization of a Magnetorheological Clutch Operated by Coils (mDa16_153)

F Bucchi (Università di Pisa, Italy), P Forte, F Frendo

Finite Element Analysis and Experimental Study of Plastic Lattice Structures Manufactured by Selective Laser Sintering (mDa16_27)

HL Choo (The University of Nottingham Ningbo China, China), J Niu, W Sun

Densification of Micro Hot-embossed Aluminium Feedstock (mDa16_143)

O Emadinia (FEUP, Portugal), MT Vieira, MF Vieira

12:40 Materials for Dielectric Elastomer Actuators and Generators (mDa16_131)

R Vertechy (University of Bologna, Italy), M Fontana

An Alternative Method to Produce Metal/Plastic Hybrid Components For Orthopedics Applications (mDa16_160)

M Silva, A Mateus (Polytechnic Institute of Leiria, Portugal), D Oliveira, C Malça

Solid State Reaction in Ni/Ti Multilayers Produced by Sputtering (mDa16_169)

S Simões, AS Ramos, F Viana, MF Vieira (Universidade de Coimbra, Portugal)

13:00-14:00 LUNCH BreaK (room under the auditorium)

Session 7a – adhesive Bonding

(Chair: C Sato, EAS Marques)

Session 7B – Composites

(Chair: AJM Ferreira)

Session 7C – Power generation

(Chair: S Muntean)

room a101 (auditorium) room B032 room B035

14:00 Methodology of Failure Load Prediction of Adhesive Bonding Structures (mDa16_117)

J Le Pavic (IRDL – CNRS, France), N Carrere, G Stamoulis, D Da Silva, D Thévenet

The Impact of Prepreg Aging on its Processability and the Post-Cure Mechanical Properties of Epoxy-Based CFRP (mDa16_83)

D Blass (Technische Universitat Braunschweig, Germany), S Kreling, K Dilger

Nonlinear Analysis of a Two-degree-of-freedom Energy Harvester (mDa16_53)

V Nico (University of Limerick, Limerick, Ireland), R Frizzell, J Punch

14:20 Moisture and Temperature Degradation of Structural Adhesives for the Automotive Industry (mDa16_75)

G Viana (INEGI, Portugal), M Costa, MD Banea, LFM da Silva

Assessing Epoxy-Composite Modification Developments by Comparison with Unmodified Reference Materials: Some Thoughts on Relevance (mDa16_103)

M Frey, D Haba, AJ Brunner (Empa, Switzerland)

Optimization Methods for a Nonlinear Energy Harvester Based on Velocity Amplification (mDa16_54)

E Boco (University of Limerick, Limerick, Ireland), R Frizzell, J Punch

14:40 Effect of Temperature on the Dynamic Response of Adhesively Mounted Accelerometers (mDa16_40)

A Spaggiari (University of Modena and Reggio Emilia, Italy), M Cocconcelli

Mechanical Behavior of Honeycomb Lattices Manufactured by Investment Casting for Scaffolding Applications (mDa16_122)

H Puga, VH Carneiro (University of Minho, Portugal), P Correira, J Barbosa, J Meireles

Experimental Investigations of MR Fluids in Air and Water Used for Brakes and Clutches (mDa16_63)

AI Bosioc (University Politehnica Timișoara, Romania), TE Beja, S Muntean, L Vékás

15:00 Influence of Humidity on the Static and Fatigue Response of Adhesively Bonded Aluminum Joints (mDa16_43)

M Costa (INEGI, Portugal), G Viana, LFM da Silva, RDSG Campilho

Optimization of Machining Parameters to Minimize Surface Roughness in Turning of Carbon and Glass Fiber Filled Polytetrafluoroethylene (mDa16_166)

Y Kaplan, ME Sanci (Pamukkale University, Turkey), S Halis

Hydrodynamic Investigations in a Swirl Generator Using a Magneto-rheological Brake (mDa16_64)

S Muntean (Romanian Academy, Romania), AI Bosioc, RA Szakal, I Borbáth, L Vékás, RF Susan-Resiga

15:20 Strength of Joints Bonded with Polyurethane Adhesives under Static or High-Rate Conditions of Combined Loading (mDa16_56)

Y Yamagata (Tokyo Institute of Technology, Japan), Y Sekiguchi, C Sato

Tribological Characteristics of Chopped Carbon Fiber and Nano Particles Reinforced Epoxy Composites by Using RSM Technique (mDa16_140)

K Dass (Maharaja Agrasen University, India), SR Chauhan, B Gaur

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016

15:40 Bonding Strength of Hot-formed Steel with an AlSi Coating and Approaches to Improve it by Laser Surface Engineering (mDa16_167)

A Wieczorek (Volkswagen, Germany), M. Graul, K Dilger

Study of Film Formation and Electrical Conductivity of PS Latex/MWCNT Composites (mDa16_129)

S Ugur (Istanbul Technical University, Turkey), O Yıldız

16:00-16:20 Coffee BreaK (room under the auditorium)

Session 8a – Design

(Chair: E Dragoni, AT Marques)

room a101 (auditorium)

16:20 Development and Validation of a Numerical Model of a Carbon Orthotic for Lower Limbs (mDa16_66)

G Bellavita, M Cocconcelli, D Castagnetti (University of Modena and Reggio Emilia, Italy), R Rubini

16:40 Optimal Design of Compressed Hydrogen Storage Vessels Using Multi-objective Genetic Algorithm (mDa16_99)

B Beylergil (Izmir Institute of Technology, Turkey), E Aktaș, M Tanoğlu, H Seçil Artem

17:00 Experimental Testing and Design Optimisation Study of a 14 m Composite Wind Turbine Blade (mDa16_107)

EF Fagan (NUI Galway, Ireland), A Doyle, T Flanagan, M Flanagan, SB Leen, O de la Torre, J Goggins

17:20 The Effect of Otitis Media with Effusion on Hearing, in the Standing and Resting Positions: a Numerical Study (mDa16_118)

B Areias (FEUP, Portugal), M Parente, F Gentil, R Natal

17:40 Hyperelastic Anisotropic Behavior of The Arterial Wall (mDa16_133)

K Aimene (University of Mouloud Mmmeri of Tizi-Ouzou, Algeria), MO Ouali

18:00 Novel Approach in Materials Selection for Reactor Pressure-Vessels Manufacturing (mDa16_115)

A Rodriguez-Prieto (UNED, Spain), AM Camacho, MA Sebastián

20:00 mDa2016 BaNQUeT (Taylor’s caves)

1st In

tern

atio

nal C

onfe

renc

e on

Mat

eria

ls D

esig

n an

d Ap

plica

tions

mDa

2016