Prosthetics Section

The Largest Independent O&P Distributor

5 7 9P R O S T H E T I C S

PR

OS

TH

ET

ICS

PROSTHETICSPostoperative Management Distal Pads and Gel Cups ...........................581 Post-Op Socks ............................................ 582 Protective Sockets ..................................... 583 Postoperative Components ...................... 585Upper Extremity Prosthetics Upper Extremity Liners ............................. 586 Arm Sleeves ............................................... 586 Cable Components .................................... 587 Harnesses ....................................................591 Elbow Devices .............................................592 Disconnect Wrists .......................................593 Flexion Wrists .............................................595 Friction Wrists.............................................595 Economy Wrists ..........................................596 Hooks ..........................................................597 Hook Accessories ........................................599 Hands ......................................................... 600Lower Extremity Prosthetics Hip Systems .................................................601 Hip Components ........................................602 Microprocessor Knees ............................... 604 Polycentric Knees ...................................... 605 Knee Disarticulation ..................................607 4-Bar Knees ................................................607 Hydraulic Knees ......................................... 609 Pneumatic Knees ........................................ 611 Safety Knees ...............................................612 Single Axis Knees .......................................613 Exoskeletal Durathane Setups ..................615 Hydraulic Knee Control Units ....................615Gait Analysis Galileo .........................................................616 Compas™ ....................................................616Endoskeletal Components Sockets ........................................................617 Socket Blocks ..............................................617 Attachment Plates .....................................618 4-Hole Pyramid Adapters ..........................623 4-Hole Pyramid Adapters with Hole ........626 4-Hole Pyramid Receiver Adapters ...........631 Threaded 4-Hole Bases and Inserts ..........633 Cup Connectors ..........................................637 4-Ear Lamination Adapters .......................637 3-Prong Lamination Adapters ..................641 4-Prong Lamination Adapters ................. 645 Double End Adapters ............................... 646 Slide and Alignment Components ........... 649 Adjustable Height Adapters .....................655

Tube Clamp Adapters ................................655 Tube Adapters ............................................659 Tube Assemblies and Pylons .....................661 Shock Pylons ...............................................663 Aluminum Tube ..........................................663 Carbon Tube .............................................. 664 AK Modular Component Sets ...................665 BK Modular Component Sets ................... 666 Ankles .........................................................667 Foot Adapters ............................................ 668 Foot Bolts ....................................................672 Blocks ..........................................................673Prosthetic Finishing AK Foam Covers .........................................674 BK Foam Covers ..........................................676 Cosmetic Covers and Skins ........................679Prosthetic Feet Centri ......................................................... 683 Custom Carbon Composite Creations ..... 687 Hosmer ....................................................... 687 Kingsley Manufacturing ........................... 688 Nabtesco-Proteor-USA .............................. 689 Trulife ......................................................... 690 WillowWood...............................................702 Accessory Feet ............................................708Lower Extremity Suspension Suspension Belts .........................................709 Straps ..........................................................712 Suspension Sleeves .....................................714 Liners ...........................................................725 Gel Sheaths .................................................736 Distal Cushions and Volume Management ..........................................737 Valves ..........................................................739 Locking Devices ..........................................746 Proximal Suspension Systems ....................762 Removable Medial Brim ............................763 3-S ................................................................764Knitted Goods Stump Shrinkers .........................................765 Sheaths ........................................................772 Filler, Spacer and Fitting Socks ..................775 Prosthetic Foot Socks .................................777 Prosthetic Socks ..........................................778 Syme’s and Partial Foot Socks ...................797 Hip Disarticulation Socks .......................... 798 Prosthetic Sock Accessories .......................799 Cosmetic Stockings ....................................799

Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com

5 8 0 P R O S T H E T I C S

PR

OS

TH

ET

ICS

P R O S T H E T I C S Postoperative Management 5 8 1


PR

OS

TH

ET

ICS

DISTAL PADS and GEL CUPS

a. Distal End Pad

Polyurethane filter foam. Sold each.

Diameter 3” 4” 5” 6”

Item No. ð DEP-300 DEP-400 DEP-500 DEP-600

b. Distal End Pad

A functional distal pad that ensures total contact between stump and socket. Made of non-toxic

urethane foam. Sold each.

Diameter 2.75” 3.25” 4” 4.5”

Item No. ð TC-2500 TC-2501 TC-2502 TC-2503

c. Distal End Pad™

Ideal for providing extra protection from shock and abrasion at the distal end. Provides protection to chang-

ing residual limb volume and mass. Tapered design may be trimmed to fit. 3.5mm at thickest point. 4” (10cm)

diameter. Sold each. From Silipos.

Item No. ð 12005-SI

d. Pressure Relief Pad Set

Sold set.

Side Left Right

Item No. ð C3MW3869L C3MW3869R

e. Felt Pressure Relief Pad Set

Sold set. From Knit-RIte.

Item No. ð 3M2RSPST


P r O S t h e t I C S5 8 2 Postoperative Management

PR

OS

TH

ET

ICS

POST-OP SOCKS

a. Unsterilized Post-Op Sock

For immediate postoperative prosthetic fittings. 3 ply weight. 97% Acrylic, 3% Lycra®. Fleeced inside. Modi-

fied box toe. Pre-rolled for application. 18” length. Packed in individual polyethylene bags. 4 per box. From

Knit-RIte.

Top x Toe 5” x 3.5” 5” x 4” 6” x 5” 8” x 6” 9” x 7”

Length 14” 18” 18” 18” 18”

Item No. ð 1PL3BS14 1PL3BS18 1PL30518 1PL32618 1PL33718

b. Pre-Sterilized Post-Op Sock

For immediate postoperative prosthetic fittings. 3 ply weight. 97% Acrylic, 3% Lycra®. Fleeced inside. Modified

box toe. Pre-rolled for application. 18” length. Packed in individual Tyvek/mylar pouches in shrink wrapped

box. 4 per box. From Knit-RIte.

Sterilization cycle is validated per current GMP standards to meet FDA requirement using ANSI/AAMI/ISO

11135 to comply with this requirement.

Top x Toe 4” x 5” 6” x 5” 8” x 6” 9” x 7”

Item No. ð 1PL3S418 1PL3S518 1PL3S618 1PL3S718

c. Symes Post-Op Sock

For immediate postoperative use. Seamless 3 ply acrylic/Lycra®. Non-sterile. Sold each. From Knit-Rite.

Length Top Width Ankle Width Ball Item No.ò

24” (60cm) 7.5” (19cm) 4.5” (11cm) 5” (12.5cm) 1SL3E124

d. Chopart Post-Op Sock

For immediate postoperative use. Seamless 3 ply acrylic/Lycra®. Non-sterile. Sold each. From Knit-RIte.

Length Top Width Ankle Width Ball Item No.ò

24” (60cm) 7” (18cm) 4” (10cm) 6” (15cm) 1CL3E124



PR

OS

TH

ET

ICS

PROTECTIVE SOCKETS

e. PAL-Guard™

Prefabricated, protective postoperative limb guard which allows for wound inspection and cleaning. Light-

weight, durable copolymer shell adds protection. Coolfoam™ liner is removable for laundering. Lateral uprights

help to align the limb and prevent knee flexion contracture. Prevents edema and helps to shape the residual

limb to prepare for prosthetic fitting. Waistbelt and suspension strap included. Sold each. From Orthomerica.

Inside Shell Circumf PAL-Guard Replacement Replacement Size Diameter Item No. Strap Set Liner Set

Small 4” 13” 8401 8401.01 8401.02

Medium 5” 16” 8402 8402.01 8402.02

Large 6” 19” 8403 8403.01 8403.02

f. Flo-Tech® SOFTIE

The Softie™ (transtibial) and Softie-TF™ (transfemoral) sockets are soft, non-constricting (when protocol is

followed), and easy to remove at any time to address wound concerns. It will protect the incision area from

micro tears which occur as the patient repositions him/herself in bed. The Softie™ is available in left or right.

The Softie-TF™ is universal. Sold each.

Description Left Right Universal Transtibial Transtibial Transfemoral

Item No. ð SOFTIE-TTL SOFTIE-TTR SOFTIE-TF

g. Flo-Tech-Tor™ — Transfemoral

The Flo-Tech-Tor™ is used as a protective socket and for early supervised weight bearing prosthetic manage-

ment of transfemoral amputations when used in conjunction with the UFOS™. Sold each.

Size Small Medium Large X-Large

Ischial Circumference 16”-22’ 19”-25” 22”-28” 26”-32”

Distal Circumference 13”-17” 16”-20” 19”-23” 24”-28”

Left TFFTLS TFFTLM TFFTLL TFFTLXL

Right TFFTRS TFFTRM TFFTRL TFFTRXL

h. UFOS™ — Transfemoral

The UFOS for transfemoral amputations is an external frame outer socket used to attach the pylon and foot

system. Fork strap provides auxiliary suspension. Copoly construction for strength and durability. Four-bolt

Grace plate accepts components. The UFOS-TF is sized to match the Flo-Tech-Tor-TF™. This system allows your

patient to wear the Flo-Tech-Tor™ alone when the pylon and foot are not needed. Sold each.


Ischial Circumference 16”-22’ 19”-25” 22”-28” 26”-32”

Distal Circumference 13”-17” 16”-20” 19”-23” 24”-28”

Left TFUFLXS TFUFLS TFUFLM TFUFLL TFUFLXL

Right TFUFRXS TFUFRS TFUFRM TFUFRL TFUFRXL


P r O S t h e t I C S5 8 4 Postoperative Management

PR

OS

TH

ET

ICS

PROTECTIVE SOCKETS — Continued

a. Flo-Tech-Tor™ — Transtibial

The Flo-Tech-Tor™ is used as a protective socket and for early supervised weight bearing prosthetic manage-

ment of transtibial amputations. 7” or 9” length. Sold each.

Size X-Small Small Medium Large X-Large XX-Large XXX-Large

MPT Circ 14”-15” 15”-16” 16”-17” 17”-18” 18”-19” 19”-20” 21”-22”

Distal Circ 13”-14” 14”-15” 15”-16” 16”-17” 17”-18” 18”-19” 20”-21”

7” Left TTFT7LXS TTFT7LS TTFT7LM TTFT7LL TTFT7LXL TTFT7LXXL TTFT7LXXXL

7” Right TTFT7RXS TTFT7RS TTFT7RM TTFT7RL TTFT7RXL TTFT7RXXL TTFT7RXXXL

9” Left TTFT9LXS TTFT9LS TTFT9LM TTFT9LL TTFT9LXL TTFT9LXXL TTFT9LXXXL

9” Right TTFT9RXS TTFT9RS TTFT9RM TTFT9RL TTFT9RXL TTFT9RXXL TTFT9RXXXL

b. UFOS™ — Transtibial

The UFOS for transtibial amputations is an external frame outer socket used to attach the pylon and foot

system. Fork strap provides auxiliary suspension. Copoly construction for strength and durability. Four-bolt

Grace plate accepts components. The UFOS 7 is sized to match the Flo-Tech-Tor™. This system allows your

patient to wear the Flo-Tech-Tor™ alone when the pylon and foot are not needed. 7” or 9” length. Sold each.


MPT Circ 14”-15” 15”-16” 16”-17” 17”-18” 18”-19” 19”-20” 21”-22”

Distal Circ 13”-14” 14”-15” 15”-16” 16”-17” 17”-18” 18”-19” 20”-21”

7” Left TTUF7LXS TTUF7LS TTUF7LM TTUF7LL TTUF7LXL TTUF7LXXL TTUF7LXXXL

7” Right TTUF7RXS TTUF7RS TTUF7RM TTUF7RL TTUF7RXL TTUF7RXXL TTUF7RXXXL

9” Left TTUF9LXS TTUF9LS TTUF9LM TTUF9LL TTUF9LXL TTUF9LXXL TTUF9LXXXL

9” Right TTUF9RXS TTUF9RS TTUF9RM TTUF9RL TTUF9RXL TTUF9RXXL TTUF9RXXXL



PR

OS

TH

ET

ICS

POSTOPERATIVE COMPONENTS

c. Adjustable BK Pylon

For use with postoperative management. Rated to 220 lb (100kg). Product weight 708g. Includes side straps

(1400011000). Sold each. From Trulife.

Item No. ð DISCON

DISCON Replacement Strap Set (4)

2240800000 Upper Quick Disconnect Plate

d. The Coupler Post-Op Kit

The Coupler™ Post-Op model consists of the basic Coupler™ Plate plus contoured stainless steel attachment

uprights. The uprights are held in place using perpendicular grooves and screws. Sold each. From Becker

Orthopedic.

Item No. ð P403010

P403010-STRAP Strap for The Coupler

e. Silesian Belt

Double thick 2” (5cm) cotton webbing and 3/4” (2cm) heavy Dacron® front attachment strap. Sold each.

From Trulife.

Waist Size Item No.ò

22” (56cm) 209L02-200-0927

24” (61cm) 209L02-400-0927

26” (66cm) 209L02-600-0927

28” (71cm) 209L02-800-0927

30” (76cm) 209L03-000-0927

32” (81cm) 209L03-200-0927


P r O S t h e t I C S5 8 6 Upper Extremity Prosthetics

PR

OS

TH

ET

ICS

UPPER EXTREMITY LINERS

a. Alpha® Upper Extremity Liner

The Alpha Upper Extremity Liner surrounds the residual limb in a layer of skin-friendly, mineral-oil-based gel

that contains Vitamin E. Made from thermoplastic elastomer (not silicone or urethane), the gel gently adheres

to the skin to protect against abrasion and breakdown. The Alpha gel is covered in a layer of durable fabric

that extends the life of the liner and allows it to easily slide into a socket.

In order to provide maximum comfort and excellent socket fit, the Alpha Upper Extremity Liner is available

in 3 mm gel thickness as well as three sizes to adapt to the amputee’s limb circumference. The unique oval-

shaped umbrella allows for a more comfortable fitting liner on upper extremity patients. Like the lower

extremity liners, the Alpha Upper Extremity Liner is heat moldable, allowing prosthetists to easily tailor

the liner’s fit within their facilities. Uniform style. Available in Original or Spirit fabric. Buff color. Sold each.

From WillowWood.

Size Small Medium Medium Plus

Original Fabric AUL-5133-E AUL-5130-E AUL-5134-E

Spirit Fabric AUL-5433-E AUL-5430-E AUL-5434-E

ARM SLEEVES

b. Arm Gel Suspension Sleeve

Works with Myo-Electric and cosmetic prostheses. 8-3/4” (22cm) length. 8-13” (20-30cm) circumference. Sold

each. From Silipos.

Item No. ð 13005

c. ComforGel™ Liner

Special gel is enclosed between two layers of cotton stretch fabric. Nylon reinforced distal end. Additional

gel at distal end. Fits adult arm or pediatric leg. 2-1/4” flat width. 10” maximum circumference. For Distal

End Hole, add 3 to end of Item No. Sold each. From Comfort Products.

3 Ply Length Gel Item No.ò 12” 9” CGELYA

12” 12” CGELYAFD

14” 9” CGELYA14

14” 12” CGELYA14/12

14” 14” CGELYA14FD

5 Ply Length Gel Item No.ò 12” 9” CGELGA

12” 12” CGELGAFD

14” 9” CGELGA14

14” 12” CGELGA14/12

14” 14” CGELGA14FD

P R O S T H E T I C S Upper Extremity 5 8 7


PR

OS

TH

ET

ICS

CABLE COMPONENTS

f. Cable, Swaged Rolls

Stainless steel. Available in small, standard, heavy-duty and nylon coated in 25’ or 100’ roll. From Hosmer.

Model No. C-101 C-101-100 C-101P C-100 C-100-100 C-100HD C-100HD-100

Type Small Small Nylon Coated Standard Standard Heavy-Duty Heavy-Duty

Diameter 3/64” 3/64” 3/64” 1/16” 1/16” 3/32” 3/32” (.119cm) (.119cm) (.119cm) (.159cm) (.159cm) (.238cm) (.238cm)

Roll Length 25’ 100’ 25’ 25’ 100’ 25’ 100’

Item No. ð 50321 56858 50322 50318 56856 50319 56857

g. Cable Housing

25’ package (two 12.5’ lengths). From Hosmer.

Description Item No.ò

Model CH-100, Fits Small (C-101) and Standard (C-100) Cable 50455

Model CH-100HD, Fits Heavy-Duty (C-100HD) Cable 50456

h. Cable Housing Liner

Teflon liner for Heavy-Duty Cable Housing (CH-100HD) and Cables of 1/16” (.159cm) diameter. 25’ roll. From

Hosmer.

Item No. ð 50482

i. Cable Housing Cover

25 foot roll. From Hosmer.


Model CHC-100, Standard 50457

Model CHC-100HD, Heavy-Duty 50458

j. Plastic Cable Retainer

Sold each.

Size 1/8” (.318cm) 3/16” (.476cm) 1/4” (.635cm)

Item No. ð 54482 54483 54484


P R O S T H E T I C S5 8 8 Upper Extremity

PR

OS

TH

ET

ICS

CABLE COMPONENTS — Continued

a. Cable Swaging Tool

Two of same size dies required. From Hosmer.

Item No. ð 50520

50524 Replacement Die, 3/64”



b. Triple Swivel

9/32” (.71cm) diameter ball for hooks. Includes grommet (50448). Sold each. From Hosmer.


Model C-701, For 3/64” (.117cm) Cable 50352

Model C-701A, For 1/16” (.158cm) Cable 50348

Model C-701HD, For 3/32” (.238cm) Cable 50353

50448 C-759, Replacement Rubber Grommet

c. Ball Terminal, 3/16”

3/16” (.48cm) diameter ball. Sold each. From Hosmer.




Model C-703HD, For 3/32” (.238cm) Cable* 50356

d. Ball Terminal, 9/32”

9/32” (.71cm) diameter ball. Sold each. From Hosmer.




e. Ball Receiver

Sold each. From Hosmer.


Model C-713 , 3/16” (.476cm) for 1/16” (.158cm) Cable 50411

Model C-713A, 3/16” (.476cm) for 3/64” (.117cm) Cable 50419

Model C-713HD, 3/16” (.476cm) for 3/32” (.238cm) Cable 50415

Model C-714 , 9/32” (.714cm) for 1/16” (.158cm) Cable 50422

Model C-713L, 3/16” (.476cm) for 1/16” (.158cm) Cable with Sliding Cover 57072



PR

OS

TH

ET

ICS

f. Retainer Base Plate

Model C-708. Includes rubber disc. Sold each. From Hosmer.

Item No. ð 50359

50360 C-708A, Replacement Rubber Disc

g. Cable Retainer



Model C-709, for Standard CH-100HD Housing, Aluminum 50361

Model C-709S, for Standard CH-100 Housing, Stainless Steel 50364

Model C-709HD, for Heavy-Duty CH-100HD Housing, Stainless Steel 50363

h. Stainless Steel Ferrule



Model C-715 , for Standard Size Cable Housing 50423

Model C-715HD, for Heavy-Duty Cable Housing 50424

For Heavy Duty Cable Housing and Teflon® Liner 61445

i. Adjustable Hanger

Model C-734. Accepts 1/16” (.159cm) or 3/64” (.119cm) cable. Sold each. From Hosmer.

Item No. ð 50434

j. Elbow Lock Cable Hanger

For 3/64” cable and 1/2” (1.27cm) tape. Sold each. From Hosmer.

Item No. ð 50747



PR

OS

TH

ET

ICS

CABLE COMPONENTS — Continued

a. Cable Hanger


Model No. C-711 C-711A C-711HD C-711M C-711MA C-711C C-711CA C-711CHD

Fits Cable Diameter 1/16” 3/64” 3/32” 1/16” 3/64” 1/16” 3/64” 3/332” (.159cm) (.119cm) (.238cm) (.159cm) (.119cm) (.159cm) (.119cm) (.238cm)

Fits Webbing 1” 1” 1” 3/4” 3/4” 1/2” 1/2” 1/2” (2.54cm) (2.54cm) (2.54cm) (1.9cm) (1.9cm) (1.27cm) (1.27cm) (1.27cm)

Item No. ð 50374 50377 50383 50384 50387 50378 50381 50382

b. Anchor Plate

Model C-710C. Sold each. From Hosmer.

Item No. ð 50370

c. Cross Bar

Stainless steel. Sold each. From Hosmer.


Model C-710A, Standard 50366

Model C-710AHD, Heavy-Duty 50367

d. Leather Cross Bar



Model C-710B, Standard 50368

Model C-710BHD, Heavy-Duty 50369

e. Lift Assembly



Model C-712, Standard 50388

Model C-712HD, Heavy-Duty 50408

50401 Screw, 10-32 1/4 Slotted Truss Head

50452 Forearm Lift Billet



PR

OS

TH

ET

ICS

f. Housing Cross Bar Assembly

Complete kit includes anchor plate, stainless steel cross bar, leather cross bar, and rivet. From Hosmer.


Model C-710, Standard 50365

Model C-710HD, Heavy-Duty 50373

g. Nylon Detachable Suspension Clip



For 1/2” (1.27cm) Harness 55102

For 1” (2.54cm) Harness 55101

For 1-1/2” (3.81cm) Harness 55100

HARNESSES

h. Northwestern Ring Harness Kit

High grade Dacron® straps. Stainless steel anchor ring prevents binding or bunching. Four bar buckles, axilla

loop “Y” strap and anterior suspension. Ready to fit. From Hosmer.


Model NRH-100, Adult, BE 51600

Model NRH-200, Adult, AE 51604

Adult, Bilateral 71787

51589 NRH-76, Stainless Steel Harness Ring, Small, 1-13/16” (4.6cm)

51589 NRH-86, Stainless Steel Harness Ring, Medium, 2-1/8” (5.4cm)

51601 NRH-101, Stainless Steel Harness Ring, Large, 2-7/16” (6.2cm)

i. Triceps Pad

Includes Dacron® straps. Sold each. From Hosmer.


Model BEC-140, Medium-Small 58338

Model BEC-160, Adult 50185

56231 Pad Only

j. Axilla Loop Pad

Preshaped plastic tube pads and protects Dacron® tape. Sold each. From Hosmer.


Model ALP-75, Fits 1/2” Tape 50114

Model ALP-100, Fits 3/4” or 1” Tape 50115



PR

OS

TH

ET

ICS

ELBOW DEVICES

a. E-400 Elbow

Provides eight to eleven locking positions and accommodates a lift assist unit. Standard size. Use left or

right. Includes Caucasian elbow cap. Other sizes and elbow cap skin colors available. Sold each. From Hosmer.


Model E-400 (Outside Cable Exit), 11 Locking Positions 50650

Model E-400A (Inside Cable Exit), 11 Locking Positions 50651

Model E-400HD (Outside Cable Exit), Heavy Duty Saddle and Gear Sector, 8 Locking Positions 50653

50720 Short Sleeve 50665 Cork Washer 50730 Elbow Saddle Assy

50721 Long Sleeve 50719 Shaft 50742 Sheet Metal Screw

57497 Internal Assembly 50739 Outside Washer 50747 Hanger

50725 Cable Housing Assy 50724 Cable Assembly 50427 Anchor

50667 Lock Nut 50729 Washer 50680 Bolt

50668 Belleville Washer 50716 Gear Sector 50678 Screw

50658 Turntable 50748 Yoke Assembly 50722 Bearing

b. Forearm Lift Assist

For use with E-400 and E-200 elbows. Mounted medially or laterally. Supplied for installation on medial side

unless otherwise specified. Weight 1.5 oz (42g). Kit includes individual parts listed beneath kits. From Hosmer.


Kit, Left 50752

Kit, Right 50609

50759 Lift Assist Assy, 50752 50764 Case Bolt, 50609

54291 Lift Assist Assy, 50609 50770 Spring

50771 Screw Lock 50765 Dog Assembly, 50752

50768 Teflon Washer 53901 Dog Assembly, 50609

50769 Screw 52022 Washer

50762 Case Bolt, 50752

c. Single Axis Below Elbow Hinge

A rugged hinge system designed for heavy duty use. Sold pair. From Hosmer.

Size Small Regular Long

Lower Strap 4.5” (11.4cm) 4.5” (11.4cm) 4.5 (11.4cm)

Upper Strap 4.5” (11.4cm) 5-1/8” (13cm) 8-5/8” (21.9cm)

Weight 4.5 oz (126g) 6.5 oz (184g) 9.0 oz (255g)

Item No. ð 51849 51855 51856

51850 Lower Strap, Rt Small 51860 Lower Strap, Rt Reg 51860 Lower Strap, Rt Long

53550 Lower Strap, Left Sm 51859 Lower Strap, Left Reg 51859 Lower Strap, Lt Long

51851 Upper Strap, Small 51861 Upper Strap, Regular 51862 Upper Strap, Long

51853 Bearing, Small 51864 Bearing, Regular 51864 Bearing, Long

51852 Washer, Small 51863 Washer, Regular 51863 Washer, Long

51865 Stud, Small 51865 Stud, Regular 51865 Stud, Long



PR

OS

TH

ET

ICS

DISCONNECT WRISTS

d. Oval Friction Disconnect Wrist with Laminating Ring

Provides manual friction adjustment and quick disconnect feature. Free motion is achieved by depressing push

lever to the first position. At the second position, the insert disconnects from the wrist body. Laminating ring

is detachable. Measures 2.25” x 1.63” (5.7cm x 4.1cm). Product weight 4.3 oz (121.9g). Sold each. From Hosmer.

Item No. ð 58150

59526 Laminating Ring

58159 Body Assembly

58153 Insert

58294 Screw (4)

52154 Allen Wrench

e. Round Friction Disconnect Wrist with Laminating Ring

Provides manual friction adjustment and quick disconnect feature. Free motion is achieved by depressing

push lever to the first position. At the second position, the insert disconnects from the wrist body. Laminating

ring is detachable. Sold each. From Hosmer.


1.75” Diameter, 3.6 oz (102.1g) 58151

2” Diameter, 4.2 oz (119.1g) 58152

59523 Laminating Ring, 1-3/4” 58153 Insert

59522 Laminating Ring, 2” 58282 Screw (4), 1-3/4”

58154 Body Assembly, 1-3/4” 58283 Screw (4), 2”

58155 Body Assembly, 2” 52154 Allen Wrench

58287 Nut Plate, 2”

f. USMC Style Quick Disconnect Wrist, Round

Quick changes and pro/supination lock. Twelve locking positions. Light pressure indexes pro/supination.

Heavier pressure detaches terminal device completely. Push to lock. 2” (5.1cm) diameter. Aluminum. Sold

each. From Hosmer.

Thread 1/2-20 12mm

Item No. ð 61862 61863

61866 Body 61865 Nut Plate 61856 Spring, .010

59522 Laminating Ring Body 61852 Pin Dowel 61857 Spring, .026

61860 Insert, 1/2-20 61853 Release Button 58286 Screw (5 required)

61861 Insert, 12mm 61854 Cover

g. USMC Style Quick Disconnect Wrist, Oval

Quick changes and pro/supination lock. Twelve locking positions. Light pressure indexes pro/supination.

Heavier pressure detaches terminal device completely. Push to lock. 1/2-20 thread. 2.25” x 1.62”. Aluminum.


Item No. ð 61922

61918 Body 61865 Nut Plate 61856 Spring, .010

59526 Laminating Ring Body 61852 Pin Dowel 61857 Spring, .026

61860 Insert, 1/2-20 61853 Release Button 51019 Screw (2 required)

61919 Cover



PR

OS

TH

ET

ICS

DISCONNECT WRISTS — Continued

a. Quick Change Wrist

Designed for quick changes of the terminal device or its positions. Light pressure on the button unlocks the

wrist and permits free rotation of the hook or hand. Heavier pressure on the button allows terminal device

to be detached from the wrist. Pressure on the end of the terminal device will re-seat and lock it into posi-

tion. Sold each. From Hosmer.


Model FM-100, Aluminum, 2” (5.1cm) Diameter, 3.25 oz (92g) 51043

Model FM-100S, Stainless, 2” (5.1cm) Diameter, 6 oz (170g) 51044

51045 Face Plate 51055 Insert Spring

51046 Yoke 51057 Screw

51049 Body, FM-100 51058 Spring

51051 Body, FM-100S 51059 Spring

51052 Insert, 1/2-20 51060 Gear Rack

58229 Insert, M12 x 1.5

b. Quick Change Wrist with Laminating Ring

Designed for quick changes of the terminal device or its positions. Light pressure on the button unlocks the

wrist and permits free rotation of the hook or hand. Heavier pressure on the button allows terminal device to

be detached from the wrist. Pressure on the end of the terminal device will re-seat and lock it into position.

Model FM-100LR. Aluminum. 2” (5.1cm) diameter. Product weight 4.1 oz (116.2g). Sold each. From Hosmer.

Item No. ð 58297

58305 Body Assembly 51046 Yoke

59522 Laminating Ring 51059 Spring

58299 Body 58283 Screw (4 required)

58287 Nut Plate 51045 Face Plate

51060 Gear Rack 51057 Screw (6 Required)

51052 Insert, 1/2-20 51058 Spring

58229 Insert, M12 x 15

c. Quick Change Wrist

Permits quick changes of the terminal device or its position. Wrist face is rotated in one direction to allow

removal of terminal device, rotating in opposite direction will place terminal device in free rotation. Central

position of wrist face locks position. Sold each. From Hosmer.


Model WD-400, Aluminum Insert, 2”, Diameter, 3.75 oz (99g) 52127

Model WD-400S, Stainless Sleeve and Insert, 2” Diameter, 4.25 oz (120g) 52128

Model WD-400SS, Stainless Throughout, 2” Diameter, 7.1 oz (201.3g) 53896

52129 Body, WD-400 54661 Spring Lock

52130 Body, WD-400S 52136 Retaining Ring

52131 Body, WD-400SS 52139 Washer

50527 Insert, WD-400 55510 Felt Oiling Pad

50528 Insert, WD-400S/400SS 50873 Roll Pin

52133 Cover, WD-400/400S 50166 Screw

56009 Cover Assy, WD-400SS



PR

OS

TH

ET

ICS

FLEXION WRISTS

d. Sierra Flexion Wrist

Lever selects three positions, 0°, 25° or 50° of flexion. 1-7/16” (3.6cm) length. Product weight 4 oz (113g).

Standard 1/2-20 thread. Sold each. From Hosmer.

Item No. ð 52371

52380 Base 52301 Screw

52375 Lever 52790 Pin

52466 Pin 52378 Plug

54954 Rocker 52300 Set Screw

52372 Rocker Bushing 52376 Compression Spring

52379 Cover

e. Flexion Friction Wrist

May be flexed and locked at 0°, 30° and 50° using lever. Automatic locking. Easily adjusted friction resistance.

Recommended for use with hooks only. Also available with laminating ring. Sold each. From Hosmer.

Size Model Diameter Thread Weight Item No.ò

Medium/Small FW-300 1.75” (4.4cm) 1/2-20 2.5 oz (71g) 51084

Medium/Small FW-300NM 1.75” (4.4cm) 12mm 2.5 oz (71g) 58220

Adult FW-500N 2” (5.1cm) 1/2-20 3.25 oz (92g) 51100

Adult FW-500NM 2” (5.1cm) 12mm 3.25 oz (92g) 58219

Adult, Stainless Steel FW-500S 2” (5.1cm) 1/2-20 7.8 oz (221g) 51101

51085 Body, FW-300 51089 Lever Lock, FW-300 51111 Spring

51102 Body, FW-500 51117 Lever Lock, FW-500/S 51825 Screw, FW-300

51103 Body, FW-500S 51087 Locking Pin, FW-300 50571 Screw, FW-500/500S

51086 Cover, FW-300 51106 Locking Pin, FW-500/S 52155 Adjustment Screw

51104 Cover, FW-500 51114 Swivel Base, FW-3/500 52154 Allen Wrench

51105 Cover, FW-500S 52830 Swivel Base, FW-500S

FRICTION WRISTS

f. Friction Wrist

Permits terminal device to be rotated to any position. Friction is easily adjusted with set screw. Insert has

stainless steel lead threads. Laminating ring version also available. Sold each. From Hosmer. See page 535

for pediatric sizes.

Size Model Diameter Thread Weight Item No.ò

Medium/Small WE-300N 1.75” (4.4cm) 1/2-20 2.0 oz (57g) 52156

Adult WE-500N 2” (5.1cm) 1/2-20 2.6 oz (74g) 52160

52157 Body, WE-300N 52152 Screw

52166 Body, WE-500N 52155 Set Screw

52151 Insert Assembly 52154 Allen Wrench



PR

OS

TH

ET

ICS

FRICTION WRISTS — Continued

a. Oval Friction Wrist

Permits terminal device to be rotated to any position. Friction is easily adjusted with set screw. Recommended

for mechanical or passive hands. Laminating ring version also available. Sold each. From Hosmer.

Size Model Length Width Thread Weight Item No.ò

Medium/Small OW-75N 2” (5.1cm) 1.5” (3.8cm) 1/2-20 2.0 oz (57g) 51618

Adult OW-100N 2.25” (5.7cm) 1.63” (4.1cm) 1/2-20 2.6 oz (74g) 51623

51621 Body, OW-75N 52155 Set Screw

51627 Body, OW-100N 52152 Face Screw

52151 Insert 52154 Allen Wrench

b. UCLA CAPP Delrin® Body Friction Wrist

Constant friction is applied with a unique friction adjustment collar. Sold each. From Hosmer. See page 535

for pediatric size.


CAPP Wrist 1413, 1-3/4” (4.4cm) Diameter, 1 oz (28g) 55109

CAPP Wrist 1414 , 2” (5.1cm) Diameter, 1.5 oz (42g) 55110

55106 Housing for 55109 55313 Allen Wrench

52805 Housing for 55110 56661 Socket Head Screw

59711 Clamp Assembly

ECONOMY WRISTS

c. Economy Wrist

Stainless steel threaded bushing. Titanium version is lightweight and corrosion resistant. Sold each. From

Hosmer.


Model WE-500 , Aluminum, 2” (5.1cm) Diameter, 2.25 oz (64g) 52159

Model WE-500S , Stainless Steel, 2” (5.1cm) Diameter, 4.75 oz (134g) 52162

Model WE-500T, Titanium 59491

52164 Body, WE-500 52172 Cover, WE-500

52831 Body, WE-500S 59464 Cover, WE-500S/500T

59490 Body, WE-500T 52173 Brass Washer

52171 Rubber



PR

OS

TH

ET

ICS

d. Economy Wrist with Laminating Ring

Model WE-500LR. Sold each. From Hosmer.

Item No. ð 58690

59522 Laminating Ring 52171 Rubber

58693 Body 52172 Cover

58692 Nut Plate 52173 Washer (2 Required)

58283 Screw (4 Required)

e. Economy Wrist with Straps

Anchor straps provide heavy duty version of the Economy Wrist. Sold each. From Hosmer.


Model WE-500SL, Stainless Steel, 2” (5.1cm) Diameter, 6.0 oz (170g) 52163

Model WE-500T, Titanium, 2” (5.1cm) Diameter, 5.0 oz (140g) 59463

52169 Body, WE-500SL

59462 Body, WE-500T

52171 Rubber

59464 Cover

52173 Brass Washer

HOOKS

f. Hook Model 5

Adult size. Canted fingers, serrated holding surfaces. Stainless steel. 4-7/8” (12.4cm). Product weight 8.0 oz

(227g). Standard 1/2-20 thread. Sold each. From Hosmer.

Side Left Right

Item No. ð 55003 55004

g. Hook Model 5X

Adult size. Canted fingers, nitrile rubber lined. Stainless steel. 4-7/8” (12.4cm). Product weight 7.5 oz (213g).


Side Left Right

Item No. ð 55009 55010



PR

OS

TH

ET

ICS

HOOKS — Continued

a. Hook Model 5XA

Adult size. Canted fingers, nitrile rubber lined. Aluminum. 4-7/8” (12.4cm). Product weight 4.0 oz (113g). Sold

each. From Hosmer.

Thread/Side 1/2-20 Left 1/2-20 Right 12mm Left 12mm Right

Item No. ð 55012 55013 61981 61973

b. Hook Model 5XTi

Adult size. Canted fingers, nitrile rubber lined. Titanium. 4-7/8” (12.4cm). Product weight 4.17 oz (118.39g).

Non-magnetic. Standard 1/2-20 thread. Sold each. From Hosmer.

Thread/Side Left Right

Item No. ð 62332 62331

c. Hook Model 555

Adult size. Lyre fingers, nitrile rubber lined. Aluminum. 5-1/4” (13.3cm). Product weight 4.5 oz (121g). Sold

each. From Hosmer.


Item No. ð 55059 55060 61978 61979

d. Hook Model SS-555

Adult size. Lyre fingers, nitrile rubber lined. Stainless steel. 5-1/4” (13.3cm). Product weight 8.5 oz (241g).


Side Left Right

Item No. ð 55062 55063

e. Hook Model 6

Adult size. Serrated holding surfaces. Heavy duty design for tool holding. Backlock. Stainless steel. 5-1/2”

(14.9cm). Product weight 14.0 oz (397g). Standard 1/2-20 thread. Sold each. From Hosmer.

Side Left Right

Item No. ð 55015 55016



PR

OS

TH

ET

ICS

f. Hook Model 7

Adult size. Serrated holding surfaces. Heavy duty design for tool holding, featuring bucket hook, nail and

chisel holders. Stainless steel. 4-7/8” (12.4cm). Product weight 10.5 oz (298g). Sold each. From Hosmer.

Side Left Right

Item No. ð 55021 55022

g. Hook Model 7LO

Adult size. Serrated holding surfaces. Heavy duty design for tool holding. Knife, pail and nail holder. Opening

for broom handle or chisel holder. 1-3/8” finger opening. Stainless steel. 5” (13.3cm). Product weight 11.0 oz

(312g). Sold each. From Hosmer.

Side Left Right

Item No. ð 55024 55025

h. Hook Model 88X

Medium adult size. Canted fingers, nitrile rubber lined. Aluminum. 4-5/8” (11.7cm). Product weight 4.0 oz

(113g). Sold each. From Hosmer.


Item No. ð 55035 55036 61992 61975

HOOK ACCESSORIES

i. Driving Ring

Attaches quickly and easily to automobile steering wheel, boat tiller and aircraft controls. Sold each. From

Hosmer.

Item No. ð 56394

56389 Driving Ring Body 56354 Bushing

56395 Coated Core Assembly 56387 Clamp

56706 Washer 51760 Screw (4 required)

56705 Nut

j. E-Z Hook Tension Band Applicator

Six hook tension bands included. Sold each. From Hosmer.

Item No. ð 55144



PR

OS

TH

ET

ICS

HOOK ACCESSORIES — Continued

a. Hook Tension Bands

Each band applies approximately 1.5 lb of prehension. Sold package. From Hosmer.


4 oz, Approximately 80 Count 53869

8 oz, Approximately 160 Count 53870

1 lb, Approximately 320 Count 53871

b. Hook Rings

50% greater force than rubber bands. 0.5” OD x 0.17” ID. Available in green only. 100 per pkg. From Hosmer.

Item No. ð 57500

c. Hook Tension Spring

Stainless steel spring may be used in place of rubber band. Each spring applies approximately 9 lbs of prehen-

sion. Sold each. From Hosmer.

Item No. ð 55363

HANDS

d. Hosmer Soft Voluntary Opening (SVO) Hand for Adult Male

Size corresponds to Metacarpal-Phalangeal circumference. Adjustable prehension from 2-6 lb. Lightweight,

rugged construction. No maintenance required. Standard 1/2-20 or 12mm thread. Standard (dorsal) or palmar

cable exit. Sold each. From Hosmer.

MCP Circ 7.75” 7.75” 8.25” 8.25” 7.75” 7.75” 8.25” 8.25”

Length 5-3/8” 5-3/8” 5-3/8” 5-3/8” 5-3/8” 5-3/8” 5-3/8” 5-3/8”

Weight 10.9 oz 10.9 oz 11.3 oz 11.3 oz 10.9 oz 10.9 oz 11.3 oz 11.3 oz

Cable Exit Standard Standard Standard Standard Palmar Palmar Palmar Palmar

Side Left Right Left Right Left Right Left Right

1/2-20 61066 61065 61068 61067 61486 61485 61488 61487

12mm 61993 61994 62006 62005 61991 61992 62008 62007

Glove No. 30703 30704 30707 30708 30703 30704 30707 30708

Regal No. 100MLLZZ 100MRLZZ 100MLLKK 100MRLKK 100MLLZZ 100MRLZZ 100MLLZZ 100MRLZZ

56760 Hosmer Color Swatch Book

P R O S T H E T I C S Lower Extremity Prosthetics 6 0 1


PR

OS

TH

ET

ICS

HIP SYSTEMS

c. Littig™ Hip Disarticulation System

With the Littig Hip strut system, a prosthesis can now be made to proper length to completely eliminate

vaulting. Energy in the form of flexion is introduced into the composite hip strut during weight bearing. By

varying the amount of pelvic thrust at toe-off, the patient can selectively release energy and control the

forward speed of the knee in motion. The action provides a controlled foot rise and effectively shortens the

prosthesis at mid swing to allow variability in toe clearance. From Trulife.

Rated to 220 lb (100kg). System includes hip joint, 14” strut and 10° adapter for modular pyramid knee at-

tachment. Cutting and Drilling Fixture for carbon composite struts available (T28800).

Selection Guide by Patient Weight

100-130 lb 131-160 lb 161-190 lb 191-220 lb Strut Length (45-59kg) (60-72kg) (73-86kg) (87-100kg)

12” to 14” Medium Firm Firm X-Firm

10” to 12” Medium Medium Medium Firm

8” to 10” Soft Medium Medium Firm

6” to 8” Soft Soft Medium Medium

Flexion Soft Medium Firm X-Firm

Complete System P28481 P28482 P28483 P28484

14” Strut Only 25181 25183 25185 25187

P28480 Hip Joint Only

d. 7E5 Modular Single-Axis Hip Joint with Lock

Recommended for K1. Features a built-in lock which automatically secures the joint in extended position.

Flexion and extension are adjusted by sliding the extension stop or the tube. Hip rotation is adjustable; for

sitting, it can be disengaged using a lever. Aluminum construction. 120° joint flexion. Rated to 220 lb. Product

weight 890g. 12 month warranty. From Ottobock.

Description Left Right

Item No. ð 7E5=L 7E5=R

e. 7E4 Modular Single-Axis Hip Joint with Extension Assist

Recommended for K2. Features include extension assist with lateral latex bands for stride control and built-

in adjustable extension stop bumper. Similar to the 7E5; extension assist limits range of joint motion while

walking. Aluminum construction. 120° joint flexion. Rated to 220 lb. Product weight 875g. 12 month war-

ranty. From Ottobock.

Item No. ð 7E4


P r O S t h e t I C S6 0 2 Lower Extremity Prosthetics

PR

OS

TH

ET

ICS

HIP SYSTEMS — Continued

a. 7E7 Modular Single-Axis Hip Joint with Internal Extension Assist

Recommended for K2-K3. Features continuously adjustable extension assist located in the lower section of

the joint. Low structural height minimizes the pelvic tilt in the seated position. Abduction/adduction, flexion/

extension and rotation can be continuously adjusted. Upper section of joint is screwed to the lamination plate

in the socket and connected to the lower joint section through the hip’s axis. Titanium construction. 130° joint

flexion. Rated to 220 lb. Product weight 875g. 12 month warranty. From Ottobock.

Item No. ð 7E7

b. Finishing Kit for Modular Hip Prosthesis

Sold kit. From Ottobock.

Item No. ð 4R32

HIP COMPONENTS

c. Pelvic Band

Offers rotational control in conjunction with the hip joint and hip belt. For use in belt style prosthetic suspen-

sion systems. May be cut or shaped. Sold each. From Trulife.

Material Steel Aluminum Plastic

Product Weight 280g 98g 35g

Item No. ð P023300000 P023200000 P023100000



PR

OS

TH

ET

ICS

d. Hip Joint, Sargent Roy

Drop-forged steel. 10-1/4” length. Sold each. From Hosmer.


Standard, 5/8” Thickness, 1-1/4” Width 52624

Small, 1/2” Thickness, 1” Width 52625

e. Hip Joint, US Steel

Used for attachment from the transfemoral socket to the hip belt. Adds length to increase the leverage to

control the lateral motion of the prosthesis. Clevis type. Provides maximum stability in all planes. Product

weight 382g. Sold each. From Trulife.


Hip Joint Only P022200000

Kit (Includes washer, nut, pin and bearing) P0222STEEL-KIT

24317-001 Nylatron Bearing, 1/2 x 5/8

f. Hip Joint, Plastic

Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to con-

trol the lateral motion of the prosthesis. Assists in transverse rotation. 6mm (1/4”) polypropylene. Product



Hip Joint Only P022100000

Kit (Includes bearing nut, washer and screws) P02221PLAS-KIT

g. Hip Joint, Stainless Steel

Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to con-

trol the lateral motion of the prosthesis. Provides moderate stability in all planes. Sold each. From Trulife.


Heavy-Duty Version: 3mm (1/8”) Thickness, Weight 234g P0223HD000

Lightweight Version: 2mm (3/32”) Thickness, 1-1/4” (32mm) Width, Weight 166g P0223RG000

Lightweight Version: 2mm (3/32”) Thickness, 1” (25mm) Width, Weight 130g P0223SM000

P0223HD-KIT Heavy Duty Kit (Includes washers, pins and nut)

P0223LTWT-KIT Lightweight Kit (Includes washers, pins and nut)

h. Hip Joint, Titanium

Used for attachment from the transfemoral socket to the hip belt. Added length increases leverage to control

the lateral motion of the prosthesis. Provides very good stability in all planes. 3mm (1/8”) thickness. Product


Item No. ð P0223HD001



PR

OS

TH

ET

ICS

MICROPROCESSOR KNEES

a. REL-K™ Microprocessor Knee System

The REL-K is the latest generation of microprocessor knees which promises amputees the ability and freedom

to navigate their environment with simplicity and ease. With six modes of control, the patient can walk, run,

negotiate slopes, climb stairs, or ride a bicycle. Since the control system is located proximally, most foot and

pylon combinations can be used unlike other systems that restrict ankle and foot combinations. The knee’s

composite frame was developed by Italian sports car designers for high-strength and cosmetic appeal. The

hydraulic unit evolved from a design used in F1 racing for speed and accuracy of control. From Fillauer.

Item No. ð DISCON

b. Single Axis Intelligent Knee

Users can walk naturally without feeling awkward using the NI-C111t from Nabtesco. The Intelligent Knee

was the world’s first computerized knee. At each step, the microprocessor monitors the user’s walking speed,

and automatically controls the swing speed of the knee joint. Rated to 220 lb. Maximum flexion 160°. Sold

each. From Nabtesco Proteor-USA.

Item No. ð 8111-2700088-11



PR

OS

TH

ET

ICS

c. 4-Bar Intelligent Knee

Users can walk naturally without feeling awkward using the NI-C421 from Nabtesco. The Intelligent Knee

was the world’s first computerized knee. At each step, the microprocessor monitors the user’s walking speed,

and automatically controls the swing speed of the knee joint. Rated to 220 lb. Sold each. From Nabtesco

Proteor-USA.

Item No. ð 8111-2700380-01

d. Hybrid Knee

A highly accurate yielding function is embodied in the new Hybrid Knee from Nabtesco. To the controlled

power of the hydraulic system, soft pneumatic control has been added. This fusion of microprocessor con-

trolled technologies gives you a hybrid system that prevents unnerving buckling at the knee, and enables easier

walking in greater comfort. Rated to 276 lb. Maximum flexion 140°. Sold each. From Nabtesco Proteor-USA.

Description Item No.ò Hybrid Knee with Pyramid 8111-2700296-01

Hybrid Knee with Threaded Head 8111-2700296-02

POLYCENTRIC KNEES

e. Polycentric Knee Joint with Integrated Extension Assist

Features an extension stop to allow adjustment of the instantaneous center of rotation. Swing phase set-

tings can be continuously adjusted through the axis friction and extension assist. Titanium. Knee flexion

angle 110°. Activity level K1, K2. Rated to 220 lbs. Product weight 445g. Height (knee center to upper edge

of pyramid) 30mm. From Ottobock.

Item No. ð 3R36

4D13 Spare Parts Pack for 3R36 and 3R20



PR

OS

TH

ET

ICS

POLYCENTRIC KNEES — Continued

a. Polycentric Knee Joint with Hydraulic Swing Phase Control

Features include built-in hydraulic cylinder for controlled swing phase and independently adjustable flexion

and extension resistance. Titanium. Knee flexion angle 112°. Activity level K3, K4. Rated to 275 lbs. Product

weight 730g. Height (knee center to upper edge of pyramid) 40mm. From Ottobock.

Item No. ð 3R55

b. Polycentric Knee Joint for Knee Disarticulation with Hydraulic Swing Phase Control

Utilizes the swing axis and brake axis as a load-dependent brake. Axis friction and the extension assist are

adjustable for improved control of swing phase. Titanium. Knee flexion angle 150°. Activity level K1, K2.

Rated to 220 lbs. Product weight 360g. Height (knee center to upper edge of pyramid) 40mm. From Ottobock.

Item No. ð 3R49

3R15 Single Axis Knee Weight Activated Brake

21Y70=N Protective Sleeve for 3R49 and 3R15

4D1 Service Pack for 3R15, 3R49 and 3R42

c. Polycentric Knee Joint for Knee Disarticulation with Lock

Features a detachable lamination anchor which connects the knee to the socket. Adjustable lock secures

knee in extension; lock is released using the remote lock release. Titanium. Knee flexion angle 110°. Activity

level K1, K2. Rated to 275 lbs. Product weight 655g. Height (knee center to upper edge of pyramid) 18mm.

From Ottobock.

Item No. ð 3R32

4F34 Lock Unit Control for 3R23, 3R32, 3R33 and 3R40



PR

OS

TH

ET

ICS

KNEE DISARTICULATION

d. Polycentric Knee Joint for Knee Disarticulation with Mechanical Extension Assist

Features a detachable lamination anchor with rotation adjustment which connects the knee to the socket.

Spring extension assist and axial friction are both adjustable. Titanium. Knee flexion angle 110°. Activity

level K1, K2. Rated to 275 lbs. Product weight 655g. Height (knee center to upper edge of pyramid) 18mm.

From Ottobock.

Item No. ð 3R30

e. Polycentric Knee Joint for Knee Disarticulation with Hydraulic Swing Phase Control

Features include separately adjustable flexion and extension resistance and low build height above the knee

to accommodate long residual limbs and knee disarticulation patients. Titanium. Knee flexion angle 110°.

Activity level K3, K4. Rated to 275 lbs. Product weight 740g. Height (knee center to upper edge of pyramid)

18mm. From Ottobock.

Item No. ð 3R46

4D13 Spare Parts Pack for 3R46 and 3R46=1

4-BAR KNEES

f. Polycentric 4-Bar Knee

Best suited for low functional level and high need for safety, this knee features adjustable A-P slide and

rotation proximally. Lightweight aluminum frame with aircraft alloy 4 bar linkage. Rated to 275 lb (125kg).

Product weight 629g. 2 year warranty. From ST&G.


with Pyramid Adapter 1321AP

with Lotus Adapter for Knee Disarticulation 1321AL



PR

OS

TH

ET

ICS

4-BAR KNEES — Continued

a. Polycentric Pneumatic 4-Bar Knee

Features pneumatic swing control and offers ultra smooth walking movement. Adjustable A-P slide and

rotation proximally. Lightweight aluminum frame with aircraft alloy 4 bar linkage. Rated to 275 lb (125kg).

Product weight 880g (1322AP) and 893g (1322AL). 2 year warranty. From ST&G.


with Pyramid Adapter (pictured) 1322AP

with Lotus Adapter for Knee Disarticulation 1322AL

b. Swan Knee

The Swan multi axial stance flexion hydraulic knee from ST&G features 5-bar linkage to prevent knee buck-

ling. At heel-contact, the knee joint bends slightly to minimize shock. At the same time the two vertical links

become nearly parallel and the center of rotation moves instantly to upper and posterior position of the hip

joint, preventing further flexion of the knee joint. After mid-stance the knee extends slowly and returns to

basic 4-bar linkage to allow knee flexion in swing-phase. Two models to choose from. Sold each. From ST&G.

Specifications

Model No: MO780 MO786 Product Weight: 670g 840g Overall Length: 194mm 194mm Overall Width 63mm 71mm Maximum Flexion: 150° 150° Weight Limit: 165 lb (75kg) 220 lb (100kg)

Item No. ð MO780 MO786

c. Seattle Natural Stance Flexion Knee

Features 7° of adjustable stance flexion, friction swing phase control, extension assist, integrated proximal

pyramid and distal tube adapter. Provides shock absorption at heel strike. Recommended for AK low to

moderate activity, K1-K2. Rated to 220 lb (100kg). Product weight 783g. Sold each. From Trulife.

Item No. ð SSK617



PR

OS

TH

ET

ICS

d. Seattle Natural Knee

Polycentric, 4-bar, friction control knee. Features adjustable flexion controls and extension assist. Available

with integrated proximal pyramid or attached disarticulation bracket. Recommended for AK low to moderate

activity, K1-K2. Rated to 220 lb (100kg). Sold each. From Trulife.

Description Item No.ò Seattle Natural Knee (pictured) SSK602A

Seattle Natural Knee with Disarticulation Bracket SSK604A

SSK602A-KIT Refurbishment Kit for SSK602A

SSK604A-KIT Refurbishment Kit for SSK604A

SSK604A-PYR Pyramid Adapter for SSK604A

SSK604A-DIS Replacment Laminating Bracket for SSK604A

HYDRAULIC KNEES

e. Endurance Hydraulic 160 Knee System

Features include standard size 160mm hydraulic unit, swing and stance phase hydraulic control, 360° proximal

rotation adjustment and adjustable yield rate. 15° flexion. Sturdy through bolt design. Four proximal adapters

available. Rated to 300 lb. Kit includes hydraulic unit, mounting kit, knee frame with proximal adjustment

screw and knee cap. From Hosmer.

Item No. ð 62041

62202 Pyramid Receiver, Female Dovetail, Lock Screws

62203 Threaded Adapter, Female Dovetail, Lock Screws

62204 4-Hole Plate, Female Dovetail, Lock Screws

62205 Pyramid, Female Dovetail, Lock Screws

60254 4-Hole Pyramid Adapter w/Through Hole (Titanium), Lock Screws

60416 4-Hole Pyramid Adapter (Stainless Steel), Lock Screws

f. Entegra Hydraulic 180 Knee System

Features include standard size 180mm hydraulic unit, swing and stance phase hydraulic control, 360° proxi-

mal rotation adjustment and adjustable yield rate. 15° flexion. Sturdy through bolt design. Hydraulic unit is

interchangeable with other frames using Mounting Kit (62206). Four proximal adapters available. Rated to

300 lb. From Hosmer.

Item No. ð 62449

61783 4-Hole Adapter with Bolt (61569) M10 x 18mm

61784 Pyramid Adapter with Bolt (61340) M10 x 30mm

61785 Slide Adapter with Bolt (61569) M10 x 18mm

61786 Threaded Adapter with Bolt (61246) M10 x 25mm

61804 Cover, Translucent Blue

61807 Bearing Replacement Kit



PR

OS

TH

ET

ICS

HYDRAULIC KNEES — Continued

a. 6-Bar Symphony Knee

The 6-Bar Symphony Knee from Nabtesco has a stance-flexion feature that, while allowing a slight amount

of flexion, instantly locks to prevent sudden buckling of the knee. It also has a hydraulic system that eases

the initiating swing. The knee joint seamlessly orchestrates then harmonizes stability of the stance phase and

smoothness of the swing phase. Rated to 276 lb. Maximum flexion 170°. Sold each. From Nabtesco Proteor-USA.

Description Item No.ò 6-Bar Hydraulic Knee with Pyramid 8111-2700632-01

6-Bar Hydraulic Knee with Threaded Head 8111-2700632-02

6-Bar Hydraulic Knee with Pyramid and Lock 8111-2700640-01

6-Bar Hydraulic Knee with Threaded Head and Lock 8111-2700640-02

b. Seattle Black Max with Titanium Frame

Single-axis, hydraulic, titanium framed knee. Features smooth flexion and is available with a proximal 4-hole

or pyramid attachment. DIstal 4-hole configuration. Recommended for AK medium to high activity level K3-

K4. Rated to 300 lb (136kg). Sold each. From Trulife.

Description Item No.ò Seattle Black Max with Titanium Frame, Titanium Pyramid and Trulife SNS Unit (119° Flexion) P25613

Seattle Black Max with Titanium Frame, 4-Hole Config and Trulife SNS Unit (119° Flexion) P25623

BM-STK Service Tool Kit

P24900 Alignment System Kit, Small

P24901 Alignment System Kit, Large

DISCON Trulife SNS Hydraulic Unit, Standard

P25627 Through Shaft with Mauch SNS Unit

P41740 Replacement Nyliner Kit

SBMKIT-STAND Replacement Knee Bearing Kit, Short

c. Seattle Black Max Short

Compact version of Black Max. Single-axis, hydraulic design. Aluminum frame with 4-hole attachment.

Recommended for AK medium to high activity level K3-K4. Rated to 300 lb (136kg). Sold each. From Trulife.

Item No. ð P37201

BM-STK Service Tool Kit

P22282 Black Max Short Knee Shaft

P24900 Alignment System Kit, Small

P24901 Alignment System Kit, Large

P41740 Replacement Nyliner Kit

P22287 Replacement Knee Cap, Black

P22285 Replacement Knee Cap, Caucasian

SBMKIT-SHORT Replacement Knee Bearing Kit, Short



PR

OS

TH

ET

ICS

PNEUMATIC KNEES

d. Spectrum 4-Bar Pneumatic Knee

Precision adjustable pneumatic system with four interchangeable springs. Glide-Flex® action provides control

and stability through the gait cycle. Modular proximal adapters ensure attachment compatibility. Anatomi-

cally accurate 4-bar design. Rated to 300 lb. From Hosmer.

Item No. ð 61245

61783 4-Hole Adapter w/Bolt, M10 x 25mm

61784 Pyramid Adapter w/Bolt, M10 x 40mm

61337 Slide Adapter w/Bolt, M10 x 28mm

61786 Threaded Adapter w/Bolt, M10 x 35mm

e. Pneumatic Single Axis Knee with Weight Activated Lock

Made of aluminum alloy and titanium, the 1320A is a durable knee in a compact size. Designed for up to

moderate activity level patients with good balance and stability, it is a single axis knee with pneumatic swing

control. Independent flexion and extension swing adjustment allows for fine adjustments of swing phase.

Product weight: 870g. Rated to 100kg. From ST&G.

Item No. ð 1320A

f. Seattle Select Stance Flexion Knee

Polycentric, pneumatic 5-bar knee features 9° of adjustable stance flexion, shock absorption at heel strike

and independently adjustable pneumatic flexion and extension control. Available with built-in proximal

pyramid or threaded adapter. Recommended for K3-K4. Rated to 220 lb. Product weight 2.3 lb (SSK615) and

2.2 lb (SSK615-THR). 2 year warranty. From Trulife.


with Proxmial Pyramid (pictured) SSK615

with Threaded Proxmial Adapter SSK615-THR

SCA237 3-Prong Threaded Lamination Anchor, Stainless Steel

SCA212 4-Hole Rotatable base



PR

OS

TH

ET

ICS

SAFETY KNEES

a. Weight Activated Locking Knee (WALK)

Brakes on weight bearing for an extra degree of stability. Independent friction and stabilizing sensitivity

adjustment controls. Patella and Adjustable Extension Assist included with knee. From Hosmer.


Titanium, Rated to 300 lb (350g) 60794

Aluminum, Rated to 220 lb (316g) 60785

60825 Extension Assist Kit

60709 Patella

b. Stabilized Pyramid Knee (SPK)

Economically priced, weight activated braking knee. Locks on weight bearing for an extra degree of stability.

Independent friction and stabilizing sensitivity adjustment controls. Patella and Adjustable Extension Assist

included with knee. Rated to 220 lb. (316g). Product weight 453g. From Hosmer.

Item No. ð 60236


59941 Patella

c. Seattle Safety Knee

Stance stability is accomplished with a weight activated load brake. Friction control is provided to adjust the

resistance between the knee axis and the brake during the swing phase. Teflon® impregnated bushing for

longer life. Higher durometer urethane bumpers for improved braking action. Extension assist (included)

may be added for smooth and reliable function. Rated to 220 lb (100kg). From Trulife.


Titanium, Weight 362g SSK335

Stainless Steel, Weight 524g SSK635

SSK603-EXT Extension Assist

SSK603-CVR Cover

d. Stabilized Knee

A perfect choice for less active transfemoral amputees. This weight-activated stance control knee features a

stainless steel wave spring extension assist which allows for a smoother gait while aiding in noise reduction.

Rated to 250 lb. From WillowWood.


Titanium, Standard, Weight 357g STK-221

Titanium with Extension Assist, Weight 447g STK-222

Stainless Steel, Standard, Weight 525g STK-223

Stainless Steel with Extension Assist, Weight 619g STK-224

STK-004 Protective Cover

STK-100 Extension Assist Assembly

STK-003 Spring Adjustment Clamp



PR

OS

TH

ET

ICS

e. GeoFlex Knee

A friction-controlled polycentric knee created for amputees who need stability but do not want a manual

locking knee. Well suited to patients with activity levels K1 and K2. 20° of flexion under load. Built-in Stance

Flexion feature allows for natural bending motion at the knee, creating a smoother stride. Roller bearing

design allows for increased durability and longevity. Rated to 250 lb. From WillowWood.


4-Hole Pattern Proximal, Tube Clamp Distal, Weight 768g GEO-200

GEO-021 Elastic Extension Assist GEO-025 Threaded Clamp Adapter

GEO-022 Dust Cover GEO-032 4-Hole Threaded Adapter

GEO-023 Bumper Replacement Kit FND-228002 AK Rotatable 3-Prong Base

f. GeoLite Knee

One of the lightest and shortest friction-controlled polycentric knees available. Suitable for levels K1 and K2.

Sharing many of the characteristics of the GeoFlex Knee, the GeoLite Knee will return to full extension when

flexed up to 20° under load without the use of any mechanical locks. Rated to 250 lb. From WillowWood.


4-Hole Pattern Proximal, Tube Clamp Distal, Weight 468g GEO-500

GEO-021 Elastic Extension Assist GEO-025 Threaded Clamp Adapter

GEO-022 Dust Cover GEO-032 4-Hole Threaded Adapter

GEO-023 Bumper Replacement Kit FND-228002 AK Rotatable 3-Prong Base

SINGLE AXIS KNEES

g. Single Axis Friction Knee (SAFK)

A compact knee ideal for moderately active patients. Provides easily accessible, adjustable constant friction.

Patella and Adjustable Extension Assist included with knee. From Hosmer.


Titanium, Rated to 300 lb (350g) 60821

Aluminum, Rated to 220 lb (316g) 60823


60709 Patella

h. Single Axis Locking Knee (SALK)

Designed for geriatrics and amputees with a lower activity level. Interchangeable with similar knees measuring

35mm from knee center to top of pyramid. Permanently lubricated bearing protects the axis from wear and

provides quiet operation. Patella and Fabric Sheath (included) provide a smooth radius for better cosmesis. Lock

cable can be located on either side of knee. Aluminum. Rated to 220 lb. Product weight 264g. From Hosmer.

Item No. ð 60471

60847 Lock Release Assembly 56191 Cable Housing

61088 Cable Assembly 60475 Fabric Knee Sheath

50427 Cable Housing Anchor



PR

OS

TH

ET

ICS

SINGLE AXIS KNEES — Continued

a. Modular Single Axis Knee Joint

Features include internal extension assist and adjustable constant friction. Locking occurs automatically at

full extension via the extension assist springs. Stainless steel. Knee flexion angle 120°. Activity level K1. Rated

to 330 lbs. Product weight 530g. Height (knee center to upper edge of pyramid) 37mm. From Ottobock.

Item No. ð 3R22

b. Single Axis Knee Joint with Lock and Extension Assist

Features include an adjustable lock which secures the knee joint in extension and is released using the remote

lock release. Locking occurs automatically at full extension via the extension assist springs. Titanium. Knee

flexion angle 120°. Activity level K1. Rated to 275 lbs. Product weight 530g. Height (knee center to upper

edge of pyramid) 39mm. From Ottobock.

Item No. ð 3R33


4D10 Spare Parts Pack for 3R33 and 3R17

c. LIghtweight Single Axis Knee Joint with Lock

Features include proximal pyramid adapter and integrated 30mm distal clamp. Adjustable manual lock in

lower joint section secures the joint in the extended position; lock is released using remote lock release.

Positive lock prevents accidentally unlocking during a flexion moment. Aluminum. Knee flexion angle 155°.

Activity level K1. Rated to 220 lbs. Product weight 290g. Height (knee center to upper edge of pyramid)

34mm. From Ottobock.

Item No. ð 3R40


4D16 Spare Parts Pack for 3R40

d. Single Axis Locking Knee

For patients that require a stable knee or that have a short residual limb. Spring loaded extension lock can

be set at the locked or unlocked position. Titanium. Rated to 220 lb (100kg). Product weight 380g. Sold each.

From Trulife.

Item No. ð SSK608



PR

OS

TH

ET

ICS

e. Dolphin Knee

Lightweight, slim and compact, the Dolphin Hydraulic Single Axis Knee with easy pre-swing has a knee axis

positioned aft. This provides excellent stability at an early stance phase, making it possible to use less muscle

strength to be in voluntary control of the knee joint. Dolphin can be used by those who are capable of voluntary

control, those who have been using it by keeping the brake sensitivity of a load brake to a minimum, as well

as those currently using a floating single axis knee. Dolphin is rated to 220 lb (100kg). Sold each. From ST&G.

Item No. ð MO703

EXOSKELETAL DURATHANE SETUPS

f. Universal Durathane Setup

Use on either right or left leg. Will accept Dupaco Hydraulic Multiplex control units. Sold each. From Hosmer.

Calf Length 13-1/4” 15-1/2”

Item No. ð 54938 54932

55925 Knee Only 70845 Knee Bolt Screw 71785 Knee Bolt Nyliner

72336 Shin Only 52267 Shaft, 2-75” 54992 Shin Nyliner

70844 Knee Bolt Shaft 52270 Expansion Plug 59589 Knee Pad

HYDRAULIC KNEE CONTROL UNITS

g. Dupaco Hydraulic Control

Designed to emulate the natural gait. Features independent variable flexion and extension resistance, and

automatic adjustment for rapid change of cadence. Multiplex models fit Entegra frame. From Hosmer.

Style Multiplex Standard Multiplex Standard Lite Phase Lite Phase

Item No. ð 59797 60030 70465 52211

Multiplex


P r O S t h e t I C S6 1 6 Gait Analysis

PR

OS

TH

ET

ICS

GAIT ANALYSIS

a. Galileo™

The Galileo Functional Level Assessment System from Orthocare Innovations is a groundbreaking technology

that scientifically tests patients’ functional levels and demonstrates treatment outcomes with quantified data

collected over a full week of real-world activity.

The Functional Level Indexes that appear at the top left corner of the Functional Level Report are calculated

based on comparisons to thousands of previous patient records. They provide a Functional Level, equivalent

to K-level with an additional decimal point of gradation, for each of three measures that the Centers for

Medicare and Medicaid Services (CMS) deems relevant to calculating overall K-level.

The Cadence Variability rating quantifies the patient’s ability to transition among various gait cadences. It is

calculated based on the amount of time the patient spends within the various gait ranges that are indicated

by the colored bars on the ambulation report (orange bar = 0–15 steps per minute, yellow bar = 16–40 steps,

and white bar = 41 or more steps).

The Potential to Ambulate rating quantifies the patient’s current maximum ability to ambulate. It is calcu-

lated based on the most intense 1 minute of activity recorded during the data recording period. The rating

provides a measure similar to that provided by certain timed walking tests, such as the 10m Walk Test; the

patient should have componentry that supports this level of activity as needed, though the patient cannot

currently persist at this intensity.


Dock and Software GK1000

GK3000 Liscensing Fee

GK500 Activity Monitor

GK10 StepWatch Strap Pack

b. Compas™

Compas™ is a breakthrough in easy-to-use, sophisticated instrumentation for clinical prosthetists. This unique

system of electronic hardware integrated into the prosthesis combines with computer software to harness

the power of objective kinetic gait data to ensure optimal outcomes in everyday prosthesis fitting.

Designed from the beginning to fit in with a standard prosthetics practice, application of Compas™ is as easy

as using any pyramid adaptor. The Smart Pyramid™ sensor mates to the Compas™ Master unit which provides

power, microprocessor control, motion sensing, a laser guide and communications.

The system continuously measures the dynamic forces and balance while the client is walking in your chosen

setting. No laboratories, no special setup and no specialized staff are required. From Orthocare Innovations.


Compas™ Master Unit CO1001

Smart Pyramid™ SP1001

TCA1001 Tube Clamp Adapter

P R O S T H E T I C S Endoskeletal Components 6 1 7


PR

OS

TH

ET

ICS

SOCKETS

a. Carbon Fiber Socket with Connector

2 layers of carbon fiber braid, 14” or 16” socket length. Connector available in 6” or 8” diameter. Two styles.

From American Prosthetic Components.

Connector Diameter 6” x 14” 8” x 14” 6” x 16” 8” x 16”

with Titanium Pyramid CPF2-806-14 CPF2-808-14 CPF2-806-16 CPF2-808-16

with European 4-Hole Pattern CPF2-406-14 CPF2-408-14 CPF2-406-16 CPF2-408-16

SOCKET BLOCKS

b. The Coupler™

The Coupler™ Conical Block incorporates all the features of the Coupler™ Plate, except it comes with molded

urethane on the conical surface. This model should only be used in wet laminations. In many cases, the need

for filler is eliminated. Sealing and grinding are rarely necessary. Sold each. From Becker Orthopedic.

Item No. ð P403005

c. Socket Block

Rated to 300 lb (136kg). Sold each. From Hosmer.

Item No. ð 60267

60329 Screw, M6 x 10 x 20mm

60281 Laminating Cover

d. Socket Attachment Block

Wood. Sold each. From Ottobock.

Description 147mm 120mm 120mm

Item No. ð 5R1=1 5R1=6 5R1=6-H


P R O S T H E T I C S6 1 8 Endoskeletal Components

PR

OS

TH

ET

ICS

SOCKET BLOCKS — Continued

a. Socket Attachment Block

Aluminum. For thermoforming. Rated to 220 lb (100kg). Sold each. From Ottobock.

Minimum Clearance 22mm 21mm 20mm

Distal Circumference 400mm 320mm 250mm


Item No. ð 5R6=1 5R6=2 5R6=3

b. Rigid Foam Laminating Block

Constructed using high strength rigid polyurethane foam around a nylon core. Easily shaped. Rated to 300

lb (136kg). Sold each. From Trulife.


Standard, 2-1/2” (64mm) Height, Weight 313g SLB210

Concave, 2-1/2” (64mm) Height, Weight 294g SLB220

Low Profile, 1-1/4” (32mm) Height, Weight 140g SLB230

c. Laminated Socket Attachment Block with Rigid Foam

Rated to 350 lb (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Product weight 124g. Carbon tape and cap

screws included. Sold each. From WillowWood.

Item No. ð 700-200

d. Laminated Socket Attachment Block

Without rigid foam. Rated to 350 lb (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Product weight 67g.

Carbon tape and cap screws included. Sold each. From WillowWood.

Item No. ð 700-250

ATTACHMENT PLATES

e. 4-Hole Spacer Plate

Aluminum. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.

Description 1/8” Round .08” Square

Item No. ð AL-418B AL-416B



PR

OS

TH

ET

ICS

f. 4-Hole Laminating Plate

Aluminum. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.


Round, Weight 57g (pictured) AL-420L

Round with 3/4-16 Center Thread, Weight 54g AL-420L-TH

Square, Weight 43g AL-430L

g. Titanium 4-Hole Threaded Lamination Plate and Cap

Includes screws. Sold each. From American Prosthetic Components.

Item No. ð TI-CPF-400

h. 4-Hole Aluminum Offset Plate

Available in four degrees of offset. Sold each. From American Prosthetic Components.

Description 9mm Offset 13mm Offset 19mm Offset 25mm Offset

Item No. ð AL-409-OS AL-413-OS AL-419-OS AL-425-OS

i. 4-Hole Aluminum Angled Flexion Plate

Available in four degrees of flexion. Standard 4-hole pattern. From American Prosthetic Components.

Description 5° Angle 8° Angle 10° Angle 15° Angle

Item No. ð AL-405-FLPL AL-408-FLPL AL-410-FLPL AL-415-FLPL

j. The Coupler™ Plate

The unique design of the Coupler™ Plate significantly decreases fabrication time. The Coupler™ Plate has

deep undercuts and knurls eliminating the need to vacuum form the plastic under the plate. The conical

pocket significantly improves the interface with the residual limb model. The Coupler™ Plate can be removed

and reused. Sold each. From Becker Orthopedic.

Item No. ð P403000

k. Integrator™ Socket Adapter

The Integrator™ Socket Adaptor, when used with one of Coyote Design’s connectors, can be built into align-

ment in one step with a clean inside socket finish. Ideal for AK or BK sockets. Weight limit: 265 lbs. Sold each.

From Coyote Design.


Integrator™, 2-3/8” diameter CD108

Integrator™, 2” diameter CD108S

CD108OR O-Ring



PR

OS

TH

ET

ICS

ATTACHMENT PLATES — Continued

a. Attachment Plate for Thermoplastic

Used with a thermoplastic socket or thigh extension where the distal surface is left intact. 4-hole European

pattern. Sold each. From Fillauer.


Non-Threaded Center Hole, Weight 46g 125298

Threaded Center Hole, Weight 64g 125290

60329 Screw, M6 x 10 x 20 mm (4 required)

b. 4-Hole Spacer Plate

Two heights. Sold each. From Fillauer.

Description 1/4” 1/2”

Item No. ð 125810 125812

c. KISS® Superhero™

This reusable test socket plate allows for easy removal of casting tape without damaging the plate. Sold

each. From KISS®.

Item No. ð CMP26/A

d. KISS® 4-Hole Lamination Kit

This reusable lamination kit allows for the easy lamination of the 4-Hole Endo Distal Base (CMP2/A). Kit

includes spacer screws. Sold each. From KISS®.

Item No. ð CMP14/A

e. Lamination Ring

Aluminum. Rated to 330 lbs (150kg). Minimum clearance 9mm. Product Weight 70g. Sold each. From Ottobock.

Item No. ð 5R2



PR

OS

TH

ET

ICS

f. Adapter Plate

Aluminum. Rated to 275 lbs (125kg). Minimum clearance 10mm. Sliding range 10-25mm. Product weight 75g.

Sold each. From Ottobock.

Item No. ð 4R118

g. Adapter Plate

A thermoplastic or laminated socket adapter with a 4-hole European pattern design that fits most prosthetic

components. Includes a set of long and short screws. Aluminum. See page 536 for pediatric model. Sold each.

From ProAdvantage.


Standard 1320-ADAPT

1320-SCREWS Plate Screws, M6 x 25mm

h. Modified Plate

Round 4-Hole Euro and 6-Hole pattern. Aluminum. Sold each. From ProAdvantage.

Item No. ð 1320-MOD

i. Spacer Plate

A round, lightweight aluminum 4-hole spacer plate designed for use between the socket and 4-hole pyramid

adapter. Sold each. From ProAdvantage.

Item No. ð 2035-SPACE

j. AK Attachment Plate System

Sold each. From RTC Corp.

Item No. ð 040-1000-90



PR

OS

TH

ET

ICS

ATTACHMENT PLATES — Continued

a. Threaded 4-Hole Laminating Ring

Heavy duty titanium. Rated to 350 lb (159kg). Product weight 34g. Sold each. From TiMed.

Item No. ð A-620

b. Seattle Mounting Plate

Provides a lightweight mounting fixture. May be used in laminated or thermoformed sockets. Outer diam-

eter: 2.83” (72mm). Center hole diameter: 1” (25mm). Plate thickness .38” (9.6mm). Rated to 300 lb (136kg).

Product weight 49g. Sold each. From Trulife.

Item No. ð SSA230

c. Socket Retainer Dish

Designed as a secure interface between socket and modular components. Allows for adjustable alignment.

For lamination or thermoforming. Carbon construction. 3.74” diameter. Product weight 62g. Rated to 220

lb (100kg). Sold each. From Trulife.

Item No. ð 21203

d. Socket Retainer Spacer Plate

Aluminum plate for spacing. 4-hole pattern. 2-1/4” (57mm) square. Center hole diameter: 1-1/2” (38mm).

Plate thickness: 1/8” (3mm). Product weight 16g. Sold each. From Trulife.

Item No. ð 29316

e. Thermoformed Socket Backup Hardware Kit

Vacuum forming attachment kit with universal 4-hole pattern for use with double walled socket construc-

tion. Sold kit. From Trulife.

Description Round Square

Item No. ð 9427D-TL 9432D



PR

OS

TH

ET

ICS

f. 4-Hole Adapter Spacer Plate

2” x 2” square. Rated to 250 lb (113kg). Sold each. From WillowWood.

Thickness 1/8” 3/8”

Item No. ð 700-300 700-375

g. 4-Hole Angle Offset Plate

Aluminum. Provides 5° of angular offset in M-L or A-P orientation. Rated to 250 lb (113kg). 5° offset. Sold

each. From WillowWood.

Item No. ð FND-135105

h. 4-Hole Aluminum Offset Plate

The aluminum 4-hole plate with 12mm offset can be installed in either an anterior/posterior or medial/lat-

eral orientation. Screws included. The weight limit is 250 lbs (115 kg). Product weight: 54g. Sold each. From

WillowWood.


i. 4-Hole Aluminum Reverse Angle Offset Plate

Provides 5 degrees of angular offset in medial/lateral or anterior/posterior orientation. Plate is offset and

angled in opposing directions. Screws included. The weight limit is 250 lbs (115 kg). Product weight: 54g.

Sold each. From WillowWood.


4-HOLE PYRAMID ADAPTERS

j. 4-Hole Pyramid Adapter

Sold each. From American Prosthetic Components.


Titanium, Rated to 300 lb (136kg), Weight 50g TI-400B

Stainless Steel, Rated to 300 lb (136kg), Weight 94g SS-400B



PR

OS

TH

ET

ICS

4-HOLE PYRAMID ADAPTERS — Continued

a. Offset 4-Hole Pyramid Adapter

Titanium. Rated to 300 lb (136kg). Product weight 83g. Sold each. From American Prosthetic Components.


with Axial Offset TI-400A

with Diagonal Offset TI-400D

b. Socket Attachment Plate with Pyramid

Red aluminum base with titanium pyramid. Rated to 300 lb (136kg). Sold each. From Fillauer.

Item No. ð 124180

c. 4-Hole Pyramid Adapter

Stainless steel. Rated to 300 lb (136kg). Product weight 104g. Sold each. From Hosmer.

Item No. ð 60416

d. Rotatable Pyramid Adapter

Titanium. Rated to 300 lb (136kg). Product weight 129g. Sold each. From Hosmer.

Item No. ð 61100

60329 Socket Attachment Block Screw, M6 x 10 x 20mm

60290 Back Plate Only

e. Socket Adapter, Male



Aluminum, Rated to 220 lb (100kg), Product Weight 55g 4R74

Stainless Steel, Rated to 275 lb (125kg), Product Weight 85g (pictured) 4R23



PR

OS

TH

ET

ICS

f. Socket Adapter, Male with Axial Offset

7mm axial offset. Sold each. From Ottobock.

Item No. ð 4R73=A-5.1

g. Socket Adapter, Male with Diagonal Offset

5mm diagonal offset. Sold each. From Ottobock.

Item No. ð 4R73=D-5

h. 4-Hole Connector with Pyramid

Titanium. Rated to 350 lb (159kg). Product weight 73g. Sold each. From ST&G.

Item No. ð 1227T

i. 4-Hole Connector Diagonal Offset Pyramid

Titanium. 8mm diagonal offset. Rated to 300 lb (136kg). Product weight 71g. Sold each. From TiMed.

Item No. ð A-292

j. 4-Hole Connector Axial Offset Pyramid

Titanium. 6.5mm axial offset. Rated to 300 lb (136kg). Product weight 70g. Sold each. From TiMed.

Item No. ð A-492



PR

OS

TH

ET

ICS

4-HOLE PYRAMID ADAPTERS — Continued

a. 4-Hole Connector with Pyramid, Heavy Duty

Titanium. Rated to 350 lb (159kg). Product weight 63g. Sold each. From TiMed.

Item No. ð A-692

b. Single Offset Pyramid Adapter

For increased alignment adjustability. 7mm of offset laterally. Standard 4-hole pattern. Titanium. Rated to

300 lb (136kg). Product weight 57g. Sold each. From Trulife.

Item No. ð 15140

c. Double Offset Pyramid Adapter

For increased alignment adjustability. 4.5mm offset anterior and 4.5mm offset laterally. Standard 4-hole

pattern. Titanium. Rated to 300 lb (136kg). Product weight 74g. Sold each. From Trulife.

Item No. ð 15141

d. 4-Hole Pyramid Adapter

Sold each. From Trulife.


Titanium, Rated to 300 lb (136kg), Weight 76g SCA218

Titanium (Heavy Duty), Rated to 366 lb (166kg), Weight 80g SCA218-HD

Stainless Steel, Rated to 300 lb (136kg), Weight 130g SCA260

4-HOLE PYRAMID ADAPTERS with HOLE

e. 4-Hole Pyramid Adapter with Center Hole



Titanium, Rated to 300 lb (136kg), Weight 50g TI-425BH

Titanium (Heavy-Duty), Rated to 500 lb (227kg), Weight 130g HD-425BH

Stainless Steel, Rated to 300 lb (136kg), Weight 91g SS-425BH

Aluminum (Heavy-Duty), Rated to 250 lb (113kg), Weight 79g (pictured) ALH-425BH



PR

OS

TH

ET

ICS

f. Rotating 4-Hole Pyramid

Titanium. Rated to 300 lb (136kg). Product weight with screws 71g. Sold each. From American Prosthetic

Components.


with Center Hole (pictured) TI-400RM

with Center Hole and Threaded Base TI-406PAT

g. 4-Hole Pyramid Adapter

Titanium with through hole. Rated to 300 lb (136kg). Product weight 50g. Sold each. From Hosmer.

Item No. ð 60254

h. Socket Attachment Plate with Pyramid and Through Hole

Red aluminum base with titanium pyramid and through hole. Rated to 300 lb (136kg). Sold each. From Fillauer.

Item No. ð 124178

i. Socket Adapter, Male with Hole

Titanium. Rated to 330 lb (150kg). Minimum clearance 7mm. Product weight 50g. Sold each. From Ottobock.

Item No. ð 4R54=5

j. Socket Adapter, Male, Rotatable with Hole

Titanium. Rated to 330 lb (150kg). Minimum clearance 11mm. Product weight 70g. Sold each. From Ottobock.

Item No. ð 4R77



PR

OS

TH

ET

ICS

4-HOLE PYRAMID ADAPTERS with HOLE — Continued

a. 4-Hole Pyramid Adapter with Hole

Attaches to any socket or knee with a distal 4-hole pattern. 4 flat head screws are provided with every pyra-

mid. Manufactured by a forged and machined combination, providing for a high quality, lightweight and

strong product. Product weight: 70g. Weight limit: 136kg. Sold each. From ST&G.


Titanium, Rated to 300 lb (136kg), Weight 70g 1217T

Aluminum, Rated to 250 lb (114kg), Weight 81g (pictured) 1217A

b. 4-Hole Connector with Pyramid with Hole

Sold each. From TiMed.


Titanium, Rated to 300 lb (136kg), Weight 45g (pictured) A-192

Aluminum, Rated to 220 lb (100kg), Weight 63g AL-192

c. 4-Hole Pyramid Adapter with Hole, Titanium

Designed for use with any locking system using a standard pin. Pyramid hole diameter: 10mm. Titanium.

Rated to 300 lb (136kg). Product weight 71g. Sold each. From Trulife.


Non-Threaded Hole SCA210

Threaded Hole SCA211

d. 4-Hole Pyramid Adapter with Hole, Stainless Steel

Pyramid hole diameter: 8.4mm. Stainless steel. Rated to 250 lb (113kg). Sold each. From Trulife.


Non-Threaded Hole, Weight 119g P15045

Threaded Hole, Weight 105g P15004

e. 4-Hole Pyramid Adapter with Hole for BK Valve

Pyramid hole diameter: 8mm. Titanium. Rated to 300 lb (136kg). Product weight 73g. Sold each. From Trulife.

Item No. ð SCA217



PR

OS

TH

ET

ICS

f. Rotatable Socket Pyramid

Infinitely rotatable with standard 4-hole pattern. Pyramid hole diameter: 10mm. Titanium. Rated to 300 lb

(136kg). Product weight 134g. From Trulife.

Item No. ð SCA216

g. Composite 4-Hole Pyramid Adapter

Strong and lightweight. Titanium pyramid has through hole. Rated to 250 lb (113kg). Product weight 68g.

Screws not included. Sold each. From WillowWood.


h. Magnum Titanium 4-Hole Adapter

Titanium with through hole. Weight limit is 350 lb (160kg) for levels K1 through K3, and 300 lb (136kg) for

K4. Product weight 56g. One year warranty. From WillowWood.

Item No. ð MHD-PA-4

i. 4-Hole Pyramid Adapter

Titanium. Rated to 250 lb (113kg). Product weight 56g. Sold each. From WillowWood.


j. 4-Hole Pyramid Adapter with Offset

Rated to 250 lb (113kg). Sold each. From WillowWood.


10mm Offset, Composite, Weight 71g FND-994110

5mm Offset, Composite, Weight 70g (pictured) FND-994105



PR

OS

TH

ET

ICS

4-HOLE PYRAMID ADAPTERS with HOLE — Continued

a. 4-Hole Pyramid Adapter with Offset

Rated to 250 lb (113kg). Sold each. From WillowWood.


20mm Offset, Titanium, Weight 93g (pictured) FND-224120

b. Threaded Rotatable Pyramid Insert

Titanium with through hole. Rated to 250 lb (113kg). Product weight 57g. Sold each. From Willow Wood.


c. 4-Hole Pyramid Slide Adapter

Provides up to 1/2” (13mm) medial/lateral or anterior/posterior slide capability. FND-134150 also provides

rotation. Aluminum. Rated to 250 lb (113kg). One year warranty. Sold each. From WillowWood.


Standard FND-134125

with Rotation (pictured) FND-134150

700-B098 SS FLat Head Cap Screw, M6 x 35mm (4)

d. Magnum 4-Hole Pyramid Slide Adapter

Ideal for providing either medial/lateral or anterior/posterior slide for heavy or very active patients. Created

with a 4-hole pattern, this Magnum Slide Adapter provides up to 1/2” (13 mm) of slide capability and can be

left in a definitive prosthesis. It is the perfect unit for providing medial/lateral slide with the Pathfinder™ II.

Pyramid is stainless steel. Rated to 350 lb (160 kg) for CMS Levels 1-3, and 300 lbs for CMS Level 4. One year

warranty. Sold each. From WillowWood.


Standard (pictured) MHD-224125

with Rotation MHD-224150

e. Laminating Pyramid Adapter

Provides a one-step lamination into a transtibial socket. Includes pre-installed carbon tape. Sold each. From

WillowWood.


Composite, Rated to 250 lb (113kg), Weight 84g FND-994000

Titanium, Rated to 350 lb (159kg)*, Weight 82g MHD-PA-L

*MHD-PA-L weight limit is 350 lb (159kg) for levels K1 through K3 and 300 lb (136kg) for K4.



PR

OS

TH

ET

ICS

4-HOLE PYRAMID RECEIVER ADAPTERS

f. 4-Hole Pyramid Receiver


Components.

Item No. ð TI-450BF

g. Rotating 4-Hole Pyramid Receiver


Components.


with Countersunk Base (pictured) TI-455RF

with Threaded Base TI-456PAT

h. Threaded Rotating Clamping Base with Receiver Adapter

Titanium 4-hole threaded rotating clamping base with receiver adapter. Sold each. From American Prosthetic

Components.

Item No. ð TI-465RF

i. 4-Hole Pyramid Receiver Adapter with Offset

7mm axially offset with 4 adjustment set screws. For connecting different modular parts or distal socket

ends. Only suitable for activity level normal, 2 and 3. Titanium. Product weight: 55g. Sold each. From Euro

International.

Item No. ð 10A89/T

j. Rotatable Adapter

Rated to 300 lb (136kg). Sold each. From Hosmer.


Titanium, Weight 82g 60293

Stainless Steel, Weight 126g 60435

60329 Socket Attachment Block Screw, M6 x 10 x 20mm

60248 Alignment Adjustment Screw, M8 x 1.25 x 12mm

60290 Back Plate Only



PR

OS

TH

ET

ICS

4-HOLE PYRAMID RECEIVER ADAPTERS — Continued

a. Socket Adapter, Female



Aluminum, Rated to 220 lb (100kg), Product Weight 50g 4R95

Titanium, Rated to 330 lb (150kg), Product Weight 50g 4R55

Stainless Steel, Rated to 275 lb (125kg), Product Weight 85g 4R22

b. Rotatable Socket Adapter, Female



Titanium, Rated to 330 lb (150kg), Min. Clearance 17mm, Product Weight 80g 4R51

Stainless Steel, Rated to 275 lb (125kg), Min. Clearance 18mm, Product Weight 140g 4R37

c. 4-Hole Pyramid Receiver


Item No. ð A-193

d. 4-Hole Rotating Base with Pyramid Receiver


Item No. ð A-526

e. Female Socket Adapter

Standard 4-hole pattern. Allows for ±8° of adjustability. Rated to 300 lb (136kg). Sold each. From Trulife.


Titanium, Weight 67g 15103-TL




PR

OS

TH

ET

ICS

f. Rotatable Socket Adapter

Infinitely rotatable with standard 4-hole pattern. Titanium. Rated to 300 lb (136kg). Product weight 142g.

Includes adjusting screws. Sold each. From Trulife.

Item No. ð SCA214

g. 4-Hole Pyramid Receiver Rotatable Adapter

Enlarged eccentric holes allow for rotation. Rated to 300 lb (136kg). Sold each. From Trulife.



Stainless Steel, Weight 154g 15005-TL

h. Rotatable Pyramid Receiver



i. 4-Hole Pyramid Receiver



THREADED 4-HOLE BASES and INSERTS

j. 4-Hole Center Threaded Base

Allows rotation. Titanium. Rated to 300 lb (136 kg). Product weight 43g. Sold each. From American Prosthetic

Components.

Item No. ð TI-460B



PR

OS

TH

ET

ICS

THREADED 4-HOLE BASES and INSERTS — Continued

a. Threaded 4-Hole Connector

Allows rotation. Titanium. Rated to 300 lb (136 kg). Product weight 39g. Sold each. From TiMed.

Item No. ð A-502

b. 4-Hole Rotatable Base

Compatible with Rotatable Pyramid Receivers SCA214-01 and SCA235-01, and Rotatable Pyramids SCA236-01

and SCA216-01. Titanium. Rated to 300 lb (136). Product weight 63g. Sold each. From Trulife.

Item No. ð SCA212

c. Pyramid with Rotation Thread

Titanium and stainless steel. Rated to 300 lb (136kg). Sold each. From American Prosthetic Components.

Description Order No.ò

Titanium, Weight 71g TI-01MS

Stainless Steel, Weight 130g SS-01MS

d. Threaded Pyramid


Item No. ð 60544

e. Threaded Pyramid

Stainless steel. Rated to 300 lb (136kg). Product weight 90g. Sold each. From Ottobock.

Item No. ð 4R87



PR

OS

TH

ET

ICS

f. Rotating Pyramid with Hole


Item No. ð 1225T

g. Rotatable Pyramid

Compatible with 4-Hole Rotatable Base SCA212 and 3-Prong Threaded Lamination Anchor SCA237. Rated to

300 lb (136kg). Sold each. From Trulife.


Titanium with Through Hole, Weight 47g SCA216-01

Stainless Steel (No Through Hole), Weight 96g SCA236-01

h. Threaded Rotatable Pyramid Insert



i. Rotating Pyramid

Titanium. Rated to 300 lb (136 kg). Sold each. From TiMed.


No Center Hole, Weight 49g A-505

with Center Hole, Weight 39g A-507

j. Center Thread Rotating Receiver



Titanium, Weight 68g TI-60FS

Stainless Steel, Weight 102g SS-60FS



PR

OS

TH

ET

ICS

THREADED 4-HOLE BASES and INSERTS — Continued

a. Rotating Pyramid Receiver


Item No. ð 1216T

b. Rotating Pyramid Receiver

Threaded. Adjustable length. Titanium. Rated to 300 lb (136kg). Product weight 164g. Sold each. From TiMed.

Item No. ð A-415

c. Rotating Pyramid Receiver



Titanium, Rated to 300 lb (136kg), Weight 45g A-506

Stainless Steel, Rated to 250 lb (113kg), Weight 67g SS-506

d. Rotatable Pyramid Receiver

Compatible with 4-Hole Rotatable Base SCA212 and 3-Prong Threaded Lamination Anchor SCA237. Rated to



Titanium, Weight 55g SCA214-01

Stainless Steel, Weight 88g SCA235-01

e. Threaded Rotatable Pyramid Receiver Insert





PR

OS

TH

ET

ICS

CUP CONNECTORS

f. Cup Connector Kit

Titanium, pyramid interface for socket. Cup design allows for additional flexion, extension, adduction or abduc-

tion. Attaches to any standard size dome or pyramid receiver. Rated to 220 lb (136kg). Sold each. From Trulife.


Small, Weight 132g P15107

Large, Weight 154g P15108

T25000 Alignment System Tooling, Thermoplastic

T25001 Alignment System Tooling, Lamination

g. Cup Connector

Titanium, pyramid interface for socket. Cup design allows for additional flexion, extension, adduction or

abduction. Attaches to any standard pyramid. Available in rotatable and non-rotatable version. Rated to



Rotatable Cup Connector with Adjusting Screws, Weight 166g P15122

Cup Connector with Adjusting Screws, Small, Weight 184g P15115

Cup Connector with Adjusting Screws, Large, Weight 206g P15116



4-EAR LAMINATION ADAPTERS

h. 4-Ear Fixed Pyramid Adapter with Center Hole



Titanium, Weight 57g TI-740L

Stainless Steel, Weight 99g SS-740L

i. Heavy Duty 4-Prong Laminating Adapter

Heavy duty titanium. Rated to 500 lb (227kg). Product weight 193g. Sold each. From American Prosthetic

Components.

Item No. ð HD-740L



PR

OS

TH

ET

ICS

4-EAR LAMINATION ADAPTERS — Continued

a. 4-Ear Rotatable Base with Pyramid

Titanium. Rated to 365 lb (166kg). Threaded inside. Product weight 142g. Sold each. From American Prosthetic

Components.

Item No. ð TI-740RM

b. 4-Ear Rotatable Base with Pyramid Receiver

Titanium. Rated to 365 lb (166kg). Threaded inside. Product weight 133g. Sold each. From American Prosthetic

Components.

Item No. ð TI-745RF

c. 4-Prong BK Adapter with Pyramid


Item No. ð 60324

d. 4-Prong BK Adapter with Through Hole



Titanium, Rated to 300 lb (136kg), Weight 38g 61134-HS

Stainless Steel, Rated to 220 lb (100kg), Weight 93g 60457

e. 4-Ear Lamination Anchor

Stainless steel. Sold each. From Ottobock.

Item No. ð 4R63=5.1



PR

OS

TH

ET

ICS

f. 4-Ear Lamination Anchor with Hole


Item No. ð 4R63=5

g. 4-Ear Lamination Anchor with Hole

Titanium. Sold each. From Ottobock.

Item No. ð 4R100=5

h. 4-Ear Lamination Adapter

Provides an option for a one-step lamination into a transtibial socket. A lamination cover is included. Manu-

factured by a forged and machined combination providing for a high quality, lightweight and strong product.

Product weight: 55g. Weight limit: 136kg. Sold each. From ST&G.

Item No. ð 1220T

i. 4-Ear Lamination Adapter with Pyramid Hole






j. 4-Ear Connector

Heavy duty titanium. Rated to 350 lb (159kg). Product weight 60g. Includes lamination dummy. Sold each.

From TiMed.

Item No. ð A-610



PR

OS

TH

ET

ICS

4-EAR LAMINATION ADAPTERS — Continued

a. 4-Ear Lamination Adapter with Hole

For transtibial or smaller transfemoral use. Pyramid hole diameter: 8mm. Stainless steel. Rated to 300 lb

(136kg). Product weight 105g. Lamination dummy included. Sold each. From Trulife.

Item No. ð P15013

b. 4-Ear Lamination Pyramid

For transtibial or smaller transfemoral use. Best suited for lower activity and lower weight patients. Pyramid

hole diameter: 8.4mm. Aluminum. Rated to 176 lb (80kg). Product weight 64g. Lamination dummy included.


Item No. ð 17002-TL

c. 4-Ear Laminating Adapter with Hole

For transtibial or smaller transfemoral use. Outer diameter: 2-1/2”. Pyramid hole diameter: 8mm. Titanium.

Rated to 300 lb (136kg). Product weight 53g. Lamination dummy included. Sold each. From Trulife.

Item No. ð SCA232

d. 4-Ear Lamination Adapter with Hole

For transtibial or smaller transfemoral use. Outer diameter: 2-3/4”. Pyramid hole diameter: 8mm. Titanium.

Standard or heavy-duty. Lamination dummy included. Sold each. From Trulife.



Titanium (Heavy-Duty), Rated to 366 lb (166kg), Weight 110g SCA233-HD

e. 4-Ear Lamination Pyramid

For transtibial or smaller transfemoral use. Stainless steel. Rated to 300 lb (136kg). Product weight 123g.

Lamination dummy included. Sold each. From Trulife.

Item No. ð SCA262



PR

OS

TH

ET

ICS

3-PRONG LAMINATION ADAPTERS

f. 3-Prong Rotatable Base with Pyramid

Stainless steel base with threaded titanium or stainless steel pyramid. Rated to 300 lb (136kg). Sold as set.

From American Prosthetic Components.


Titanium, Weight 202g TI-700LM

Stainless Steel, Weight 258g SS-700LM

g. 3-Prong Rotatable Base with Pyramid Receiver

Stainless steel base with threaded titanium or stainless steel pyramid receiver. Rated to 300 lb (136kg). Sold

as set. From American Prosthetic Components.


Titanium, Weight 184g TI-750LM

Stainless Steel, Weight 230g SS-750LM

h. 3-Prong Laminating Base

Stainless steel. Threaded on outside. Rated to 300 lb (136kg). Product weight 116g. Sold each. From American

Prosthetic Components.

Item No. ð SS-300LM

i. Rotatable Socket Adapter with Pyramid Receiver


Item No. ð 60312

60314 Rotatable Pyramid Receiver, Stainless Steel

61416 Socket Adapter Only, Threaded

j. Rotatable Socket Adapter with Pyramid


Item No. ð 60576



PR

OS

TH

ET

ICS

3-PRONG LAMINATION ADAPTERS — Continued

a. Above Knee 3-Prong Socket Adapter

Stainless steel. Rated to 300 lb (136kg). Product weight 129g. Includes Laminating Cap. Sold each. From Hosmer.

Item No. ð 60325

60299 Laminating Cap

b. 3-Prong Adapter with Pyramid


Item No. ð 4R42=5

c. Rotatable 3-Prong Adapter with Pyramid

Stainless steel. Rated to 275 lb (125kg). Minimum clearance 15mm. Product weight 180g. Sold each. From

Ottobock.

Item No. ð 4R89

4X46 Lamination Dummy

d. 3-Prong Socket Adapter with Rotation


Ottobock.

Item No. ð 4R41

4R87 Threaded Pyramid Insert

4R44=N Threaded Pyramid Receiver Insert


e. 3-Prong Rotating Base

Stainless steel construction. Provides 360° of rotation for pyramid adapter or pyramid receiver adapter. Rated

to 150 lb (136kg). Product weight 116g. Sold each. From ST&G.

Item No. ð 1221S



PR

OS

TH

ET

ICS

f. 3-Prong Rotating Adapter

Stainless steel. Rated to 300 lb (136kg). Product weight 113g. Sold each. From TiMed.

Item No. ð SS-511

T-300 Lamination Dummy

g. Flexible 3 Ear Connector

Titanium. Rated to 300 lb (136kg). Product weight 616g. Sold each. From TiMed. Patent 7,722,679 B2

Item No. ð A-511-3


h. 3-Prong Rotating Pyramid

Stainless steel base with threaded titanium pyramid. Rated to 300 lb (136kg). Product weight 161g. Sold

each. From TiMed.

Item No. ð A-515

i. 3-Prong Rotating Pyramid Receiver

Stainless steel base with threaded titanium pyramid receiver. Rated to 300 lb (136kg). Product weight 158g.


Item No. ð A-516

j. 3-Prong Rotatable Lamination Pyramid with Hole

Stainless steel. Rated to 300 lb (136kg). Product weight 115g. Includes laminating dummy. Sold each. From

Trulife.

Item No. ð P15019



PR

OS

TH

ET

ICS


a. 3-Prong Rotatable Lamination Adapter, Female

Stainless steel. Rated to 300 lb (136kg). Product weight 197g. Sold each. From Trulife.

Item No. ð SCA235

b. 3-Prong Rotatable Lamination Anchor

For residual limbs with larger circumference. Prongs may be contoured. Stainless steel. Threaded on inside.

Rated to 300 lb (136kg). Product weight 200g. Male Adapter Piece (SCA236-01) also available separately.


Item No. ð SCA236

c. 3-Prong Threaded Lamination Anchor

Stainless steel. Rated to 300 lb (136kg). Product weight 107g. Sold each. From Trulife.

Item No. ð SCA237

SCA235-01 Rotatable Pyramid Receiver Adapter Insert

SCA236-01 Rotatable Pyramid Adapter Insert

d. 3-Prong Lamination Anchor

For residual limbs with larger circumference. For transfemoral or transtibial use. The prongs can be contoured.

Lamination dummy included. Sold each. From Trulife.

Item No. ð SCA266

e. 3-Prong Rotatable Pyramid Receiver

Stainless steel. Rated to 250 lb (113kg). Product weight 191g. Sold each. From WillowWood.




PR

OS

TH

ET

ICS

f. 3-Prong Rotatable Pyramid Adapter

Stainless steel. Rated to 250 lb (113kg). Product weight 198g. Sold each. From WillowWood.


g. 3-Prong Rotatable Base

Stainless steel. Threaded. Rated to 250 lb (113kg). Product weight 119g. Includes Lamination Plug. One year

warranty. Sold each. From WillowWood.


FND-268005 Lamination Plug

4-PRONG LAMINATION ADAPTERS

h. Rotatable 4-Prong Adapter with Pyramid


Ottobock.

Item No. ð 4R116


i. 4-Prong Socket Adapter with Rotation


Ottobock.

Item No. ð 4R111=N

4R87 Threaded Pyramid Insert

4R44=N Threaded Pyramid Receiver Insert




PR

OS

TH

ET

ICS


a. Rotatable 4-Prong Adapter with Pyramid Receiver


Ottobock.

Item No. ð 4R111


b. Rotatable 4-Prong Adapter, Female with Angled Arm


Item No. ð 4R119

DOUBLE END ADAPTERS

c. Double Pyramid Adapter

Titanium. Rated to 300 lb (136kg). Product weight 122g. Sold each. From American Prosthetic Components.

Item No. ð TI-115DM

d. Double Pyramid Adapter


Ottobock.

Item No. ð 4R76

e. Double Pyramid Adapter

Stainless steel. Rated to 300 lb (136kg). Minimum clearance 6.5mm. Product weight 115g. Sold each. From

Ottobock.

Item No. ð 4R78



PR

OS

TH

ET

ICS

f. Double Ended Pyramid Adapter


Item No. ð A-210

g. Dual Adapter

Double ended. Titanium and stainless steel. Both rated to 300 lb (136kg). Sold each from American Prosthetic

Components.

Height 32mm 45mm 60mm 75mm

Titanium Product Weight 71g 99g 113g 128g

Item No. ð TI-132D TI-145D TI-160D TI-175D

Stainless Product Weight 116g 147g 187g 223g

Item No. ð SS-132D SS-145D SS-160D SS-175D

h. Dual Adapter

Double ended. Titanium, rated to 300 lb (136kg) and aluminum, rated to 220 lb (100kg). Sold each. From Hosmer.



Item No. ð 60306 60439 60440 60441

Aluminum Product Weight 68g 80g 93g 106g

Item No. ð 61361 61362 61363 61364

i. Double Adapter, Female/Female

Titanium. Rated to 330 lb (150kg). Sold each. From Ottobock.


Product Weight 85G 95G 110G 125G

Item No. ð 4R72=32 4R72=45 4R72=60 4R72=75

j. Double Ended Adapter

Titanium. Rated to 300 lb (136kg). 2 year warranty. Sold each. From ST&G.


Product Weight 88g 99g 113g 126g

Item No. ð 1201T 1202T 1203T 1204T



PR

OS

TH

ET

ICS

DOUBLE END ADAPTERS — Continued

a. Double Ended Adapter

Titanium, rated to 300 lb (136kg) and stainless steel, rated to 250 lb (113kg). Sold each. From TiMed.



Item No. ð A-401 A-402 A-403 A-404

Stainless Product Weight 117g 144g 171g 198g

Item No. ð SS-401 SS-402 SS-403 SS-404

b. Variable Height Adapter

Titanium. Standard or heavy-duty. Sold each. From Trulife.

Standard Height 32mm 45mm 60mm 72mm 101mm

Weight Limit 300 lb 300 lb 300 lb 300 lb 300 lb Product Weight 76g 93g 106g 130g 143g

Item No. ð SCA221 SCA222 SCA223 SCA224 16108

Heavy-Duty Height 32mm 45mm 60mm 72mm

Weight Limit 366 lb 366 lb 366 lb 366 lb Product Weight 95g 110g 122g 140g

Item No. ð SCA221-HD SCA222-HD SCA223-HD SCA224-HD

c. Variable Height Adapter

Aluminum. Rated to 300 lb (136kg). Sold each. From Trulife.

Height 1-1/4” 1-3/4” 2-1/4” 7” (31.75mm) (44.45mm) (57.15mm) (178mm)


Item No. ð P15031 P15032 P15033 P15008

d. Dual Pyramid Receiver

Double ended. Rated to 350 (160kg) for levels K1-K3 and 300 lb (136kg) for K4. Titanium. Sold each. From

WillowWood.



Item No. ð FND-228032 FND-228045 FND-228060 FND-228075

e. Titanium Pyramid/Receiver Adapter

Titanium. Product weight 74g. Sold each. From American Prosthetic Components.

Item No. ð TI-125P



PR

OS

TH

ET

ICS

f. Double Adapter, Male/Female

Titanium. Rated to 330 lb (150kg). Product weight 115g. Sold each. From Ottobock.

Item No. ð 4R84

g. Double Ended Adapter with Pyramid

Titanium or stainless steel. Rated to 275 lb (125kg). One year warranty. Sold each. From ST&G.



Item No. ð 1261T 1262T 1263T 1264T

Stainless Steel Product Weight 102g 112g 124g 162g

Item No. ð 1261S 1262S 1263S 1264S

SLIDE and ALIGNMENT COMPONENTS

h. Rotating and Alignable Offset Dual Receiver Adapter

Allows offset alignment in all directions and 360° rotation. Product height 1-5/8”. Titanium. Rated to 300 lb

(136kg). 5 year warranty. Sold each. From American Prosthetic Components.

Item No. ð TI-675AR

i. 4-Hole Alignable Pyramid with Center Hole

By using the set screws in different configurations, pyramid may be offset axially, diagonally or a combination

of both. Titanium. Rated to 300 lb (136kg). 5 year warranty. Sold each. From American Prosthetic Components.

Item No. ð TI-600AD



PR

OS

TH

ET

ICS

SLIDE and ALIGNMENT COMPONENTS — Continued

a. Alignment Sleeve System

The alignment sleeve system from American Prosthetic Components consists of 24 modular components to

use in combination with or without a pylon to create a prosthesis that allows for easily adjusted height and

rotation. Several components have an integrated dovetail for offset alignment. All are rated to 300 lb (136kg).

Components are precision CNC machined, CE marked, individually hand inspected and come with a 5 year

warranty. American made and competitively priced.

Description Pictured Item No.ò

Aluminum Sleeve Dual Clamp, 40mm AL-40-SLCL

Aluminum Sleeve Dual Clamp, 60mm 3 AL-60-SLCL



Aluminum Sleeve Spacer, 5mm AL-5-SLSP

Aluminum Sleeve Spacer, 7.5mm AL-7.5-SLSP


Aluminum Sleeve Spacer, 12.5mm 3 AL-12.5-SLSP


Titanium Pyramid w/Female Thread TI-SL70-PF

Titanium Pyramid w/Male Thread TI-SL70-PM

Titanium Pyramid Receiver w/Female Thread 3 TI-SL75-RF

Titanium Pyramid Receiver w/Male Thread TI-SL75-RM

Titanium Pyramid w/Male Dovetail TI-600-SLA-PM

Titanium Male Thread Adapter w/Female Dovetail 3 TI-610-SLA-TF

Titanium Tube Clamp Adapter w/Female Dovetail TI-615-SLA-CF

Titanium Dual Female Dovetail 3 TI-620-SLA-FF

Titanium Pyramid Receiver w/Female Dovetail TI-630-SLA-RF

Titanium Pyramid w/Female Dovetail TI-640-SLA-PF

Titanium Pyramid Receiver w/Male Dovetail 3 TI-650-SLA-RM

Titanium Tube Clamp Adapter w/Male Dovetail 3 TI-655-SLA-CM

Titanium 4 Prong Laminating Base w/Male Thread TI-740-B

Stainless Steel 3 Prong Laminating Base SS-300LM

700LAM-TOOL Reusable Lamination Thread Capping Tool

b. Alignable Four Connector

Connector is used with Air-Lock and Integrator™. Can be offset from the bottom of the lock and fabricated

into the laminated socket. Used in definitive sockets when customer is needing to offset the alignment.

Pediatric versions available. From Coyote Design.

Item No. ð CD103AF

CD103MDI Insert, Multiple Direction Offset

CD103SDI Insert, Single Direction Offset



PR

OS

TH

ET

ICS

c. Alignment Coupler

Coupler is used for dynamic alignment during test socket fitting. Connects to standard four hole and can

offset the prosthetic alignment (foot) from the bottom of the socket. Up to 265 lbs. Not for use in definitive

sockets. From Coyote Design.

Item No. ð CD106

d. Endoskeletal Alignment Unit

Includes all parts listed below. Sold kit. From Fillauer.

Item No. ð 125321

124105 Universal Coupling Ring with Top Plate

124140 A-P and M-L Slide Unit with Rotation and Pyramid

124170 Pylon Tube Clamp with Pyramid Receiver

125032 Pylon Tube, 30mm x 10”

125101 Lower Pylon Tube Clamp (Bolt and Flat Washer included)

e. Universal Coupling Ring with Screws

Sold each. From Fillauer.

Item No. ð 124106

124106A Adapter Ring, Anodized

880288 Socket Cap Screw, M6 x 1 x 30mm Flat Head (4)

882612 Set Screw Con Point, M6 x 1 x 12mm (3)

f. A-P/M-L Slide Unit with Rotation and Pyramid


Item No. ð 124140-FL

882511 Flat Head Cap Screw, M5 x .8 x 10mm 124155 Top Plate Assembly

882416 Socket Head Set Screw, M4 x .7 x 12mm 124133 Gib

882408 Socket Head Cap Screw, M4 x .7 x 8mm 124150 Dome Plate Assembly

124110 Center Plate

g. A-P/M-L Slide Unit with Pyramid and Socket Attachment Plate


Item No. ð 124141

880136 Flat Head Undercut Screw, 10-32 x 5/16 124164 Socket Attachment Plate

882416 Socket Head Set Screw, M4 x .7 x 12mm 124133 Gib

882408 Socket Head Cap Screw, M4 x .7 x 8mm 124150 Dome Plate Assembly

124110 Center Plate



PR

OS

TH

ET

ICS


a. Spectrum Pyramid Receiver with Female Dovetail

Rated to 220 lb (100kg). Product weight 67g. Sold each. From Hosmer.

Item No. ð 60950

60861 Pyramid Receiver

60248 Set Screw, M8 x 12mm

55501 Ball Bearing, 3/32” (2 required)

60598 Set Screw, M5 x 6mm with Nylock (3 required)

b. Spectrum Pyramid Receiver with Male Dovetail


Item No. ð 60951

60938 Pyramid Receiver

60248 Set Screw, M8 x 12mm

60862 Short Screw

60610 Pan Head Screw, 6-32 x .25

c. Spectrum 30mm Tube Clamp Adapter with Female Dovetail


Item No. ð 60954

60939 Tube Clamp Adapter, 30mm

56039 Socket Head Screw, M6 x 25mm

55501 Ball Bearing, 3/32” (2 required)

60598 Set Screw, M5 x 6mm with Nylock

d. Spectrum 4-Hole Plate with Male Dovetail


Item No. ð 60956

60860 4-Hole Plate

60862 Side Shift Screw

60329 Flat Head Screw, M6 x 20mm (4 required)

60610 Pan Head Screw, 6-32 x .25

e. Spectrum 4-Hole Plate to Pyramid Receiver with Alignment Adapter

Rated to 220 lb (100kg). Height 1-3/32”. Sold each. From Hosmer.

Item No. ð 60958

60956 4-Hole Plate with Male Dovetail Sub-Assembly

60955 Male/Female Dovetail Adapter

60950 Pyramid Receiver with Female Dovetail

60329 Flat Head Screw, M6 x 20mm (4 required)



PR

OS

TH

ET

ICS

f. Spectrum Pyramid Receiver to Pyramid Receiver

Rated to 220 lb (100kg). Height 2”. Sold each. From Hosmer.

Item No. ð 60961

60950 Pyramid Receiver with Female Dovetail

60951 Pyramid Receiver with Male Dovetail

g. Spectrum Pyramid Receiver to Pyramid with Alignment Adapter


Item No. ð 60962

60952 Pyramid with Female Dovetail

60955 Male to Female Dovetail Adapter Sub-Assembly


h. Spectrum Pyramid Receiver to Pyramid


Item No. ð 60963

60952 Pyramid with Female Dovetail


i. Spectrum Pyramid Receiver to 30mm Tube Clamp with Alignment Adapter


Item No. ð 60965

60954 30mm Tube Clamp with Female Dovetail

60955 Male to Female Dovetail Adapter


j. Spectrum Pyramid Receiver to 30mm Tube Clamp


Item No. ð 60966

60954 30mm Tube Clamp with Female Dovetail




PR

OS

TH

ET

ICS


a. Transfemoral Rotator

Allows cross-legged sitting. Facilitates entering and exiting cars. Smooth, one-handed, push button operation.

Robust spring loaded lock. Automatic relock. Low profile and lightweight. Sold each. From Hosmer.

Item No. ð 62588

b. Slide Double Adapter

Titanium. Rated to 220 lb (100kg). Slide range +/- 11mm. Sold each. From Ottobock.

Height 60mm 75mm

Product Weight 215g 225g

Item No. ð 4R104=60 4R104=75

c. Slide Adapter

The 4R101 is mounted between the socket attachment block and the socket adapter or functional adapter.

It allows independent shifts in the frontal and sagittal planes and a convenient scale makes it easy to track

adjustments. Aluminum. Rated to 220 lb (100kg). Slide range +/- 11mm. Sold each. Product weight 205g.

From Ottobock.

Item No. ð 4R101

d. Alignment Adapter Set

The Alignment Adapter Set serves to optimize alignment of modular lower limb prostheses in temporary

initial and/or interim fittings. It includes two assembly plates, one adapter with pyramid and one adapter

with pyramid receiver. Adjustments may be made both in the frontal and the sagittal plane, as well as in the

rotational direction. Aluminum/titanium. Rated to 220 lb (100kg). Sold set. From Ottobock.

Specifications

Sliding range in A-P direction with assembly plate 1: 48mm in 12mm increments with assembly plate 2: 24mm in 12mm increments

Sliding range in M-L direction with assembly plate 1: 24mm in 12mm increments with assembly plate 2: 18mm in 9mm increments

Rotational Adjustment: +/- 18° in 3° increments

Product Weight: 195g-510g

Item No. ð 4R112



PR

OS

TH

ET

ICS

ADJUSTABLE HEIGHT ADAPTERS

e. Adjustable Pylon

Features precise height and rotation adjustments without removing the socket or foot. The adjustable pylon

significantly reduces patient appointment time, saving an average of 15-20 minutes per visit! The adjustable

pylon also makes off-site visits more efficient and therapist-friendly. Rated to 220 lb (100kg). Sold each. From

Kinetic Revolutions.

Specifications PCP-0100-PSD (Tall) PCP-0104-PSD (Short)

Extension Range 3.75-5” (95-130mm) 2.88-3.75” (73-95mm) Outside Diameter 32mm 35mm


Tall PCP-0100-PSD

Short PCP-0104-PSD

TUBE CLAMP ADAPTERS

f. 30mm Tube Clamp Adapter

5 year warranty. Sold each. From American Prosthetic Components. See page 539 for pediatric size.


Titanium, Rated to 300 lb (136kg), Weight 71g TI-100C

Titanium (Heavy-Duty), Rated to 500 lb (227kg), Weight 125g HD-100C

Stainless Steel, Rated to 300 lb (136kg), Weight 125g SS-100C

g. Tube Clamp with Pyramid Receiver

Titanium and aluminum. 30mm tube. Rated to 300 lb (136kg). Sold each. From Fillauer.


Aluminum (red) 124170-FL

Titanium 60247

Stainless Steel 60400

h. 30mm Adapter

Set screws included. One year warranty. Sold each. From WillowWood.


Titanium, Rated to 250 lb (113kg), Weight 100g FND-220030

Magnum (Heavy-Duty Titanium), Rated to 350 lb*, Weight 110g MHD-002

Aluminum, Rated to 250 lb (113kg), Weight 86g FND-130030

*Weight limit for the Magnum Adapter is 350 lb for levels K1-K3 and 300 lb for level K4.

Tall Short



PR

OS

TH

ET

ICS

TUBE CLAMP ADAPTERS — Continued

a. Tube Clamp Adapter

30mm. Sold each. From Ottobock.


Aluminum 4R69=5

Titanium 4R52=5

Stainless Steel 4R21=5

b. Tube Clamp Adapter



Titanium 4R82

Stainless Steel 4R91

c. Tube Clamp

Standard 30mm. 2 year warranty. Sold each. From ST&G.


Aluminum, Rated to 250 lb (114kg), Product weight 83g 1212A

Stainless Steel, Rated to 275 lb (125kg), Product weight 128g 1212S

Titanium, Rated to 300 lb (136kg), Product weight 79g 1212T

Heavy Duty Titanium , Rated to 375 lb (170kg), Product weight 128g 3212T

d. Tube Clamp

Standard 30mm. Sold each. From TiMed.


Titanium, Rated to 300 lb (136kg), Weight 79g (pictured) A-503

Titanium (Heavy-Duty), Rated to 350 lb (136kg), Weight 95g A-613



e. 34mm Tube Clamp Adapter

Extra heavy duty. Rated to 500 lb (227kg). Product weight 181g. Sold each. From TiMed.

Item No. ð EH-503-XHD



PR

OS

TH

ET

ICS

f. Adjustable Clamp Adapter

Standard 30mm. Sold each. From Trulife.




Stainless Steel, Rated to 300 lb (136kg), Weight 109g SCA270

Aluminum, Rated to 176 lb (80kg), Weight 68g 17001-TL

SCA-SET Clamp Adapter Screws (set of 4)

g. Tube Clamp with Pyramid

Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 85g. 5 year warranty. Sold each. From

American Prosthetic Components.

Item No. ð TI-120P

h. Tube Clamp Adapter with Pyramid

Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 61g. Sold each. From TiMed.

Item No. ð A-504

i. Adjustable Clamp Adapter with Pyramid

Standard 30mm. Titanium. Rated to 300 lb (136kg). Product weight 61g. Sold each. From Trulife.

Item No. ð SCA226

j . Tube Clamp Adapter with Offset Receiver

Titanium. 5mm offset. Rated to 300 lb (136kg). Product weight 105g. Sold each. From American

Prosthetic Components.

Item No. ð TI-105C



PR

OS

TH

ET

ICS

TUBE CLAMP ADAPTERS — Continued

a. Angled Tube Clamp Adapter



10° Angle 4R56

20° Angle 4R56=1

b. Offset Tube Clamp


Item No. ð 1222T

c. 10 Degree Angled Tube Clamp

Often used to aid in alignment associated with hip disarticulation. Titanium. Rated to 220 lb (100kg). Product

weight 86g. 2 year warranty. Sold each. From ST&G.

Item No. ð 1213T

d. Offset Tube Clamp

Standard 30mm. 5mm offset. Sold each. From TiMed.




e. Angled Adjustable Clamp Adapter

Increases flexion or extension adjustments. 10° angle. Rated to 300 lb (136kg). Sold each. From Trulife.






PR

OS

TH

ET

ICS

f. Tube Clamp Adapter with Slide



Aluminum 4R98

Titanium 4R103

Stainless Steel 4R88

g. Sliding Tube Clamp

Offers sliding adjustment. Titanium. Rated to 220 lb (100kg). Product weight 185g. 2 year warranty. Sold

each. From ST&G.

Item No. ð 1219T

TUBE ADAPTERS

h. Connection Adapter, Male



Titanium, Product weight 65g 4R84=D

Stainless Steel, Product weight 145g 4R84=D-62

i. Connection Adapter, Female



Titanium, Product weight 70g 4R72=D

Stainless Steel, Product weight 150g 4R72=D-62



PR

OS

TH

ET

ICS

TUBE ADAPTERS — Continued

a. Tube Adapter



30mm 2R45=S

34mm 2R45=34

b. Adjustable Pylon

Titanium. Rated to 300 lb (136kg). Product weight 99g. 5 year warranty. Sold each. From American Prosthetic

Components.

Item No. ð TI-110AT

c. Short Tube Adapter



Titanium, Rated to 300 lb (136kg), 100mm Length, Weight 110g 60558

Aluminum, Rated to 220 lb (100kg), 200mm Length 61352

d. Tube with Pyramid Receiver

Provides optimum strength and options for low clearance requirements. Titanium. 100mm height. Rated to

300 lb (136kg). Product weight 128g. 2 year warranty. Sold each. From ST&G.

Item No. ð 1205T

e. 30mm Tube with Pyramid Receiver


Item No. ð A-405



PR

OS

TH

ET

ICS

f. Rotating Pyramid Receiver

Threaded. Adjustable length. Titanium. Rated to 300 lb (136kg). Product weight 164g. Sold each. From TiMed.

Item No. ð A-415

TUBE ASSEMBLIES and PYLONS

g. Pylon with Fixed Receiver Adapter


Description 10” 17”

Titanium Receiver TI-10TC TI-17TC

Titanium Internal Receiver TI-10TCI TI-17TCI

Stainless Steel Receiver SS-10TC SS-17TC

h. 30mm Pylon with Adapter

Rated to 300 lb (136kg). Sold each. From Hosmer


Titanium, 300mm Length, Weight 258g 60246

Titanium, 400mm Length, Weight 321g 60245

Stainless Steel, 300mm Length, Weight 286g 60430

Stainless Steel, 400mm Length, Weight 350g 60429

60248 Alignment Adjustment Screw, M8 x 1.25 x 12mm

i. 30mm Tube Adapter



Titanium 2R38=5

Stainless Steel 2R3

Aluminum 2R49

j. 34mm Tube Adapter


Description Long Short

Titanium 2R58 2R57

Stainless Steel 2R77 2R76



PR

OS

TH

ET

ICS

TUBE ASSEMBLIES and PYLONS — Continued

a. Angled Tube Adapter

Titanium. 30mm. Adapter angled 10°. Sold each. From Ottobock.

Item No. ð 2R38=10

b. Fixed Adapter and 30mm Aluminum Tube

Permanent adapter at one end of 400mm aluminum tube. Includes insert. Insert is required at non-modified

end when using 30mm tube to provide extra security and strength. From WillowWood.


Titanium, Rated to 250 lb*, Weight 313g FND-221330

Aluminum, Rated to 250 lb*, Weight 298g FND-131330

FND-000030 30mm Tube Insert, 13g

*Weight limit is 250 lb for levels K1-K2. The weight limit is 220 lb for levels K3-K4 (Titanium) and level K3 only (Alu-minum). The aluminum adapter assembly is not recommended for level K4.

c. Tube Clamp Assembly

30mm. Sold each. From ST&G.


Titanium 1211T

Aluminum 1211A

d. Tube Assembly with Bonded Adapter

400mm length. Sold each. From TiMed.


Aluminum Pylon w/Titanium Pyramid Receiver, Rated to 250 lb (113kg), Wt 270g (Gold) DISCON

Aluminum Pylon w/Low Profile Ti Pyramid Receiver, Rated to 250 lb (113kg), 291g (Silver) A-712

Aluminum Pylon w/HD Titanium Pyramid Receiver, Rated to 300 lb (136kg), 279g (Blue) A-612

Aluminum Pylon w/SS Pyramid Receiver, Rated to 250 lb (113kg), Wt 331g (Gold Tube)* SS-512

Aluminum Pylon w/Aluminum Pyramid Receiver, Rated to 220 lb (100kg), 310g (1-Piece) AL-512

e. Aluminum Tube with Bonded Adapter



Titanium, Rated to 225 lb (102kg), 10” (254mm) Length, Weight 191g P15111-TL

Titanium, Rated to 225 lb (102kg), 17” (432mm) Length, Weight 282g P15118

Titanium (Heavy Duty), Rated to 366 lb (166kg), 10” (254mm) Length, Weight 273g P16211

Stainless Steel, Rated to 225 lb (102kg), 10” (254mm) Length, Weight 228g P15011

Aluminum, Rated to 176 lb (80kg), 17” (432mm) Length, Weight 280g* P17018



PR

OS

TH

ET

ICS

f. Aluminum Pylon Assembly

Several models. Rated to 225 lb (102kg). Sold each. From Trulife.


w/Bonded Titanium Female Adapter, Weight 280g SPA200-B

w/Bonded Titanium Pyramid Adapter, Weight 272g SPA200-M

w/Bonded Stainless Steel Female Adapter, Weight 318g SPA200-S

No Adapter, Weight 219g SPA200-P

SHOCK PYLONS

g. DuraShock Shock/Torsion Reducing Pylon

Simulates the rotation and shock absorption of the natural limb during stance phase. 60° of axial rotation

(30° in each direction). Maintenance-free design. Requires less than 5” in clearance. Short model measures

7.5”. Long version measures 11.25”. Sold each. From Fillauer.

Activity Level K2 (Short/Long) <144 lb 145-179 lb 180-220 lb 220-250 lb

Activity Level K3 (Short) <139 lb 140-169 lb 170-200 lb 200-250 lb

Activity Level K3 (Long) <144 lb 145-169 lb 170-220 lb 220-250 lb

Tube Diameter 30mm 30mm 30mm 34mm

Description Black Blue Red Heavy-Duty

Short (Minimum Length 4.75”) DS003S DS002S DS001S DS004S

Long (Minimum Length 5.75”) DS003L DS002L DS001L DS004L

h. DuraShock Shorty

Three stiffness options matched to patient weight and activity. The Dynamic Elastomers create smooth mo-

tion. Up to 60° of axial rotation. Shock absorption for increased socket comfort. Reduces rotational force to

residual limb. Clearance as low as 3.5” (89mm). Maintenance-free design requires no bumper changes. Sold

each. From Fillauer.

Patient Weight 200 lb 179 lbs 144 lb

Description Black Blue Red

Item No. ð DS001SS DS002SS DS003SS

ALUMINUM TUBE

i. Aluminum Tube

Seamless aluminum tube. Rated to 300 lb (136kg). 5 year warranty. Sold each. From American Prosthetic

Components.


10” Length, 30mm, Rated to 300 lb (136kg) AL-10T

17” Length, 30mm, Rated to 300 lb (136kg) AL-17T

11.75” Length, 34mm, Rated to 500 lb (227kg) HD-AL-PYLON



PR

OS

TH

ET

ICS

ALUMINUM TUBE — Continued

a. Pylon Tube

Aluminum. 30mm. Rated to 300 lb (136kg). Sold each. From Fillauer.

Description 10” Length 17” Length 36” Length

Item No. ð 125032 125034 238024

b. Pylon Tube

Aluminum. Rated to 300 lb (136kg). 30mm x 36” length. Blue. Sold each. From Hosmer.

Item No. ð 60550

c. Aluminum Tube

Aluminum. Sold each. From TiMed.


30mm x 380mm, Rated to 300 lb (136kg), Weight 236g, (Blue) A-100

30mm x 36”, Rated to 250 lb (113kg), Weight 526g, (Silver) A-300

d. Aluminum Tube

Aluminum. Black anodized finish. Rated to 220 lb (100kg). 30mm x 36” length. Sold each. From Trulife.

Item No. ð P15036

CARBON TUBE

e. 30mm Composite Tube

Rated to 350 lb (159kg)*. 400mm length. Product weight 251g. Inserts (included) are required at each end to

provide extra security and strength. Sold each. From WillowWood.

Item No. ð MHD-30CT

MHD-30CTI Tube Insert, 7g

700-TL003 Magnum Tube Cutting Guide

*Weight limit is 350 lb (159kg) for levels K1-K3 and 300 lb (136kg) for level K4.



PR

OS

TH

ET

ICS

f. Heavy-Duty Carbon Tube

Rated to 375 b (170kg). 30mm diameter. 305mm length. 2 year warranty. Sold each. From ST&G.

Item No. ð 1209C

g. Carbon Fiber Tube

Standard and heavy-duty. 11.75” length. Sold each. From TiMed.


30mm, Rated to 350 lb (159kg), Weight 148g A-200

34mm, Rated to 500 lb (227kg), Weight 236g A-500XHD

AK MODULAR COMPONENT SETS

h. AK-500 System

The new AK-500 System from TiMed is the only AK system on the market rated to 500 lb. It features high

quality titanium components, patented 4-bar polycentric knee with lock, extra high strength carbon tube and

SACH foot (available in sizes 25-33cm). This system has been tested and certified by Berlin Cert, institute for

testing and certification of medical devices associated with the Technical University Berlin. Complete system

includes components listed separately. From TiMed.

Cosmesis Selection Guide

Color Caucasian Light Light Dark Latin Caucasian Negroid Negroid

Color Code Leave Blank CL 4A 7A L


Complete System AK-500 - (Foot Size) (Side) - (Color Code)

EH-653 4-Prong Lamination Clamp, 110g A-500XHD 35mm Carbon Tube, 195g

EH-701 Shuttle Lock, 255g EH-503 Tube Clamp, 161g

EH-693 Knee Adapter, 181g EH-605 Adapter, 100g

KN-500 Polycentric Knee w/Lock, 1,120g EH-500 SACH Foot



PR

OS

TH

ET

ICS

BK MODULAR COMPONENT SETS

a. APCI Modular Components Sets

Save using convenient set options from American Prosthetic Components.

Stainless Steel Sets

Set Components: SS-10TC SS-100C Item No.ò

SS 10” Basic Set 3 3 SS-10SET-B

Titanium Sets

Set Components: TI-10TC TI-17TC TI-100C TI-400B TI-400L TI-425BH TI-500P Item No.ò

10” Basic 3 3 TI-10SET-B

10” Basic + 3 3 3 TI-10SET-B2

10” Basic + w/hole 3 3 3 TI-10SET-B2WH

10” 4-Prong Lam 3 3 3 TI-10SET-B4L

17” Modular Set 3 3 3 3 TI-17SET

17” Basic 3 3 TI-17SET-B

17” Basic + 3 3 3 TI-17SET-B2

17” Basic + w/hole 3 3 3 TI-17SET-B2WH

b. Basic BK Kit

Sold kit. From Hosmer.


Titanium Kit (Includes titanium parts listed below) 60577

Stainless Kit (Includes stainless parts listed below) 60578

60247 Tube Clamp, Titanium

60400 Tube Clamp, Stainless

60246 Pylon with Titanium Adapter, 300mm

60430 Pylon with Stainless Steel Adapter, 300mm

60260 Connector

60273 SACH Foot Adapter, Titanium with Steel Bolt

60405 SACH Foot Adapter, Stainless with Steel Bolt

c. BK Socket Block Kit

Includes all parts listed beneath kit. Sold kit. From Hosmer.


Titanium Kit 60581

Stainless Kit 60579

Titanium Kit Parts: Stainless Steel Kit Parts:

60267 Socket Block 60267 Socket Block

60254 4-Hole Pyramid, titanium 60416 4-Hole Pyramid, stainless steel

60247 Tube Clamp, titanium 60400 Tube Clamp, stainless steel

60260 Connector 60260 Connector

60273 SACH Foot Adapter, titanium 60405 SACH Foot Adapter, stainless steel



PR

OS

TH

ET

ICS

d. BOA® G-2 Kit with Adapter

G-2 Adjustment Section with Adapter for Lamination. 20mm horizontal slide and 24° angle adjustment.

Includes 30mm x 300mm aluminum tube. Rated to 275 lb (125kg). Product weight 249g. From Fillauer.

Item No. ð 731000161

e. BK-201 Kit

Kit includes components listed separately below. Sold kit. From TiMed.

Item No. ð BK-201

A-503T Titanium Tube Clamp, 83g

A-512 30mm Aluminum Pylon with Titanium Receiver, 295g

f. BK-500 Kit

Kit includes components listed separately below. Sold kit. From TiMed.

Item No. ð BK-500

EH-610 XHD 4-Ear Connector, 156g

A-500 XHD 34mm Carbon Tube, 236g

EH-503 XHD 34mm Tube Clamp, 181g (2)

ANKLES

g. Earthwalk™ 2 Ankle

The Earthwalk 2 Ankle is an innovative multiaxial ankle, geared toward amputees (U.S. Activity Levels 1 and

2) who are looking for more stability and less dynamic response. The “late stop” feature allows for easy roll

over so the foot can maintain foot flat longer. With the Earthwalk 2 Ankle, amputees enjoy the freedom

of movement through inversion and eversion, internal and external rotation, and plantar and dorsiflexion.

Rated to 250 lb (115kg). Product weight 185g. Product height 41.25mm. From WillowWood.

Toe Stiffness Very Low Low Regular High

Patient Weight < 150 lb 151-175 lb 176-220 lb 221-250 lb (<70kg) (71-80kg) (81-100kg) (101-115kg)

Color Code Red Blue Yellow Green

Item No. ð EWA2-R EWA2-B EWA2-Y EWA2-G



PR

OS

TH

ET

ICS

ANKLES — Continued

a. Impulse™ Ankle

Designed for amputees with activity levels K1 to K3. Features inversion/eversion, axial rotation and sleek

profile that facilitates adjustments and cosmetic finishing. Integrated titanium pyramid. Maintenance-free

design. Product weight 185g. Sold each. From WillowWood.

Base Material Aluminum Aluminum Aluminum Aluminum Titanium Titanium

Patient Weight < 150 lb 151-190 lb 191-230 lb 231-270 lb 271-310 lb 311-350 lb (<68kg) (69-86kg) (887-104kg) (105-122kg) (123-140kg) (141-160kg)

Color Code Red Blue Yellow Green Black White

Item No. ð IMPA-R IMPA-B IMPA-Y IMPA-G IMPA-K IMPA-W

b. Multi-Axis Ankle

Suitable for use with any single bolt prosthetic foot. Provides multi-axis ankle motion throughout stance. Ad-

justable plantar flexion, dorsiflexion and range of motion. Rated to 220 lb (100kg). Includes set of durathane

bumpers. Product weight (including bumpers) 223g. Sold as set. From Trulife.

Item No. ð P31800

FOOT ADAPTERS

c. Foot Pyramid

Foot bolt included. 5 year warranty. Sold each. From American Prosthetic Components.


Titanium, Rated to 300 lb (136kg), Weight 113g TI-500P

Titanium (Heavy-Duty), Rated to 500 lb (227kg), Weight 170g HD-500P

Stainless Steel, Rated to 300 lb (136kg), Weight 125g SS-500P

Aluminum (Heavy-Duty), Rated to 250 lb (113kg), Weight 125g ALH-500P

500P-PL Foot Plate Plastic Cap

d. SACH Foot Adapter

Rated to 300 lb (136kg). Bolt is made of slightly heavier, superior grade alloy steel. From Hosmer.



Stainless Steel, Weight 142g 60405-HS

60260 Foam Connector, 17g



PR

OS

TH

ET

ICS

e. Foot Attachment Plate with Pyramid

Rated to 220 lb (100kg). Red aluminum with titanium pyramid. Sold each. From Fillauer.

Item No. ð 124160-FL

f. Foot Pyramid


Item No. ð 2LTC-1208

g. SACH Foot Adapter


Item No. ð 2R31=M10-5

h. SACH Foot Adapter

Sold each. From ST&G.


Titanium, Rated to 300 lb (136kg), Product Weight 136g 1231T

Stainless Steel, Rated to 275 lb (125kg), Product Weight 112g 1231S

Aluminum Rated to 250 lb (114kg), Product Weight 105g 1231A

1231-1 Bolt for SACH Foot Adapter

i. Heavy Duty SACH Foot Adapter

Designed with a shorter flange to provide better strength with reduced weight. Rated to 375 lb (170kg). Two

year warranty. Includes foot bolt. From ST&G.

Item No. ð 3231T



PR

OS

TH

ET

ICS

FOOT ADAPTERS — Continued

a. SACH Foot Adapter

Bolt included. Sold each. From TiMed.


Titanium, Rated to 250 lb (114kg), Weight 90g with Bolt A-509

Titanium (Heavy-Duty), Rated to 350 lb (159kg), Weight 95g with Bolt A-509HD

Stainless Steel, Rated to 250 lb (113kg), Weight 113g with Bolt SS-509

Aluminum, Rated to 220 lb (100kg), Weight 108g with Bolt AL-509

b. SACH Foot Adapter without Flange

Titanium. Rated to 300 lb (136kg). Product weight 86g with bolt. Sold each. From TiMed.

Item No. ð A-609

c. SACH Foot Pyramid — Titanium

Titanium. Front to back length 2” (51mm). Includes foot bolt. Sold each. From Trulife.




d. SACH Foot Adapter

For use with SACH feet with carbon or Delrin® keels. Titanium. Rated to 300 lb (136kg). Product weight 46g.


Item No. ð SCA242

SFB540 Foot Bolt (sold separately)

e. SACH Foot Adapter

For use with SACH feet with wooden keels. Includes foot bolt (SFB540). Sold each. From Trulife.


Titanium, Rated to 300 lb (136kg), Front-to-Back Length 2-3/8” (61mm), Weight 46g 15100

Titanium (Heavy-Duty), Rated to 366 lb (166kg), Front-to-Back Length 2-5/8”, Weight 56g 16100



PR

OS

TH

ET

ICS

f. SACH Foot Pyramid — Stainless Steel

Stainless Steel. Rated to 300 lb (136kg). Front-to-back length 2-5/8” (67mm). Product weight 84g. Includes

anti-rotation pins (12419-001). Sold each. From Trulife.

Item No. ð SCA280

SFB540 Foot Bolt (sold separately)

g. SACH Foot Pyramid — Aluminum

Aluminum. Rated to 176 lb (80kg). Front-to-back length 2-3/4” (69mm). Product weight 56g. Includes foot

bolt. Sold each. From Trulife.

Item No. ð P17000

h. Female Foot Adapter

Titanium. Set screws are at the top and angled upward for easy foot alignment. Includes foot bolt. Sold

each. From Trulife.


Titanium, Rated to 300 lb (136 (kg), Weight 120g SCA241


i. Model F5 — Aluminum Coupler with Pyramid Reciever

The F5 Coupler with integrated pyramid receiver allows patients with a quick changing self-aligning device

to quickly change prosthetic feet or knee-shin systems (i.e. changing from walking foot to a running foot).

Adjustments are possible to the distal portion of the coupler without the expense of additional components.

The F5 is constructed of high strength aircraft grade aluminum alloy to provide a strong, yet lightweight

component and is hard coated for even greater durability. 1.75” H x 2.5” W. Product weight 7.3 oz. Kit includes

replacement parts listed separately. From Ferrier Coupler Inc.

Item No. ð F5

A200 Pyramid Receiver

T802 Male Component with Pyramid Receiver

D300 Delrin Pin

KEY Key for Pin

j. Foot Spacer

Provides versatility during setup and fabrication. Designed of lightweight nylon. For temporary or permanent

use. Rated to 300 lb (136kg). Sold each. From Trulife.

Size 0.25” 0.5” 1” 1.5”


Item No. ð SFS230 SFS231 SFS232 SFS210



PR

OS

TH

ET

ICS

FOOT ADAPTERS — Continued

a. Symes Nut

Standard/heavy duty. Sold each. From Kingsley Manufacturing.

Item No. ð K2016

b. Seattle Symes Nut

Provides a broad, solid anterior support surface. Fabricated from aluminum alloy. Abrasive etch finish ensures

secure socket adhesion during fabrication. For laminated sockets, maximum weight of 300 lb (136kg). Sold

each. From Trulife.

Item No. ð SSY300

FOOT BOLTS

c. Kingsley Foot Bolt

Sold each. From Kingsley Manufacturing.


Kingsley SACH Foot Bolt, 3” x 3/8-16 K20103

d. Seattle Foot Bolts



Seattle Foot Bolt, 10mm x 55mm SFB540





PR

OS

TH

ET

ICS

BLOCKS

e. Durathane BK Shin Block

Lighter and easier to shape than wood. Slight taper. 18” height, 7” diameter, 1-3/16 center hole. Sold each.

From Hosmer.

Item No. ð 70018

f. Seattle Ankle Block

Designed for use with Seattle feet in exoskeletal construction. High strength rigid polyurethane foam sur-

rounds a nylon core. Lightweight and durable enough to withstand the forces imposed by a dynamic response

foot. Rated to 300 lb (136kg). Core diameter 2” (51mm). Largest width 4-1/2” (114mm). Sold each. From Trulife.


Standard, 4-7/8” (124mm) Height, Weight 426g SAB310

Low Profile, 3-3/8” (86mm) Height, Weight 369g SAB320

g. Durathane Ankle Block

Sold each. Bolt sold separately. From Hosmer.

Block Length SACH 3/8” Bolt 10mm Bolt

5-3/4” 55915 70477

8” 55917 70479

h. Seattle Laminating Core

High strength, low profile alternative to an ankle block. Requires minimal keel to socket clearance. Ribbed

nylon for secure adhesion in the lamination process. For laminated sockets. Rated to 300 lb (136kg). Product


Item No. ð SLC300

i. Heel Cushion Material

Heel cushion material for build-ups or heel height modification. From Kingsley.

Derometer Extra Soft Soft Medium Firm

Wedge (pictured) K20HW-XS 20HW-S K20HW-M K20HW-F

Small Block K20HCBS-XS 20HCBS-S K20HCBS-M K20HCBS-F

Large Block K20HCB-XS 20HCB-S K20HCB-M K20HCB-F


P R O S T H E T I C S6 7 4 Prosthetic Finishing

PR

OS

TH

ET

ICS

AK FOAM COVERS

a. Transfemoral Foam Cover

Neuter, 30”. Sold each. From Fillauer.

Item No. ð 189120

b. AK Soft Foam Cover

Pre-shaped conventional soft foam. Removable inner thigh section. Shin section accepts 30mm pylon. Sold

each. From Hosmer.

Side Left Right

Item No. ð 59170 56866

c. AK Foam Cover

94cm length. 30° knee flexion. Pre-shaped and drilled with stepped center hole. Beige. Made of PUR flexible

foam. From Ottobock.

Calf/Side 36cm Left 36cm Right 40cm Left 40cm Right 44cm Left 44cm Right

Item No. ð DISCON DISCON DISCON DISCON 3R6=L44 3R6=R44

d. AK Foam Cover

94cm length. 30° knee flexion. Pre-shaped and drilled with stepped center hole. Beige. Made of PUR flexible

foam. From Ottobock.

Calf/Side 36cm Left 36cm Right 40cm Left 40cm Right 44cm Left 44cm Right

Item No. ð 3R24=L36 3R24=R36 3R24=L40 3R24=R40 3R24=L44 3R24=R44

P R O S T H E T I C S Prosthetic Finishing 6 7 5


PR

OS

TH

ET

ICS

e. AK Foam Cover

94cm length. 30° knee flexion. 44cm calf circumference. Pre-shaped and drilled with stepped center hole.

Beige. Made of PUR flexible foam. From Ottobock.

Side Left Right

Item No. ð 3S26=L 3S26=R

f. Soft Foam Cover

Urethane. Available in 18” and 24” core depths. Pre-shaped for ease of finishing. Flame resistant material.


Length Core Depth Left Right

36” (91cm) 18” (46cm) P41820 P41821

36” (91cm) 24” (61cm) P41822 P41823

g. Standard AK Foam Cover

Durable foam with center hole. Standard or Vacuum packaging. Sold each. From WillowWood.

Packaging Standard Standard Vacuum Vacuum

Side Left Right Left Right

Buff CFB-1AK-LB CFB-1AK-RB CFB-1AK-LB-V CFB-1AK-RB-V

Medium Brown CFB-1AK-LM CFB-1AK-RM CFB-1AK-LM-V CFB-1AK-RM-V

h. Easy Shape AK Foam Cover

Less density for easier shaping. Features center hole. Standard or Vacuum packaging. Sold each. From Wil-

lowWood.

Packaging Standard Standard Vacuum Vacuum

Side Left Right Left Right

Buff CFB-3AK-LB CFB-3AK-RB CFB-3AK-LB-V CFB-3AK-RB-V

Medium Brown CFB-3AK-LM CFB-3AK-RM CFB-3AK-LM-V CFB-3AK-RM-V



PR

OS

TH

ET

ICS

BK FOAM COVERS

a. Cosmetic Soft Foam Cover

Made of PE foam. For modular and transtibial prostheses. Not pre-shaped. Skin color. Sold each. From Euro

International.

Item No. ð 60A8

b. BK Foam Cover

Neuter, 21.5”. Sold each. From Fillauer.

Item No. ð 189122

c. Foam Fairings

Closed cell polyethylene foam. Medium density. 6” diameter. Sold each. From Fillauer.

Description 18” 18” w/Cavity 21.5” 24”

Item No. ð 189112 189118 189116 189117

d. BK Foam Cover

6” diameter. 21” length. Sold each. From Friddle’s Orthopedic.

Item No. ð 700119-FR

e. ProFormance® Caucasian Foam Cover

Caucasian color. Sold each.

Description 1” Hole 1.25” Hole

Item No. ð PF-BKFC-100-C PF-BKFC-125-C



PR

OS

TH

ET

ICS

f. ProFormance® Foam Cover

Plastazote. 6” diameter. 21” length. White. Sold each or bulk.

Count Each 25/Pkg

Item No. ð PF-BKFC-621 PF-BKFC-PTZ

g. ProFormance® Foam Fairing

Closed cell polyethylene foam. Medium density. 6” diameter. Sold each.

Length 18” 18” 21.5” with Cavity

Item No. ð PF-BKFF-180 PF-BKFF-180C PF-BKFF-215

h. Plastazote® Foam Cover

Easily shaped by heating and/or sanding. Sold each.

Item No. ð 56798-FP

i. Foam Cover

55cm length. Features a drilled center hole compatible with either 30mm or 34mm diameter systems. Universal

design can be used left or right. Beige color. Made of PUR flexible foam. From Ottobock.

Item No. ð 6R6=B

j. Foam Cover

48cm length. Features a drilled center hole compatible with either 30mm or 34mm diameter systems. Universal

design can be used left or right. Square. Beige color. Made of PE foam. From Ottobock.

Hole 30mm 34mm

Item No. ð 6R8=30 3R8=34



PR

OS

TH

ET

ICS

BK FOAM COVERS — Continued

a. Standard BK Foam Cover

Firm and lightweight. 1” center hole is compatible with 18mm and 23mm tubes. 1-1/4” center hole is compat-

ible with 30mm tubes. Sold each. From WillowWood.

Packaging Standard Vacuum

1” Center Hole, Buff CFB-1BK-B-25 CFB-1BK-B-25V

1” Center Hole, Medium Brown CFB-1BK-M-25 CFB-1BK-M-25V

1-1/4” Center Hole, Buff CFB-1BK-B-32 CFB-1BK-B-32V

1-1/4” Center Hole, Medium Brown CFB-1BK-M-32 CFB-1BK-M-32V

b. Foam Cover

48cm length. Pre-shaped and features a drilled center hole compatible with either 30mm or 34mm diameter

systems. Universal design can be used left or right. Beige color. Made of PE foam. From Ottobock.

Hole 30mm 34mm

Item No. ð 6R18=30 3R18=34

c. EZ Cover

EZ Cover offers an alternative to the labor-intense process of creating a conventional prosthetic foam cover.

Simply adjust the pre-shaped form to the appropriate circumferential size and cut as needed. The proprietary

material also allows for heat modification. Kit includes form, connector and cloth tape. From ST&G.

Item No. ð 4001

d. Foam Foot Connector

Provides a non-rigid transition between the foot and soft foam cover. 1” thick firm expanded polyethylene.

Easily shaped. Sold each. From Trulife.

Item No. ð P21406



PR

OS

TH

ET

ICS

COSMETIC COVERS and SKINS

e. ALPS EasySkin™ TSK

ALPS™ cosmetic covers are pre-stretched and are heated to shrink to size. After pulling skin over prosthe-

sis, use a heat gun to start at the toes and work up to the proximal brim. If needed, a vinyl contact cement

can be used or super glue for a permanent bond. Can be used on transtibial patients. For use with suction

suspension applications, place a small hole so the cosmetic cover does not inflate. Sold each. Please specify

color (C) when ordering. Swatch ring listed below.

Color Selection

3 5 7 9 11 12 13

Skin tones pictured here are approximate.


Standard Small, 18-23cm Foot Length, 17-22cm Ankle*, 25-35cm Calf Circumference TSK-(C)-S

Standard Large, 23-30cm Foot Length, 22-29cm Ankle*, 35-45cm Calf Circumference TSK-(C)-L

SWATCH-TSK ALPS Thermoskin Swatch Ring

f. Dream Skin

Offering the lifelike cosmetic quality of a custom cosmesis at an off-the-shelf price, Dream Skin is a heat

shrinkable leg covering that combines superior durability and stain-resistant cosmesis with the elastic prop-

erties necessary for easy donning and application. The unique waterproof, closed-cell Micro Coated Vinyl

resists marks, cleans easily and reduces friction with clothing. Dream Skin is available with or without split

toe in five sizes and 18 skin tones. Sold each. From Centri. Please specify color when ordering by replacing

** in item number with 2-digit color code.

Color Selection

01 02 03 04 05 06 07 08 09

10 11 12 13 14 15 16 17 18


Foot Size 21-22cm 23-24cm 25-26cm 27-28cm 29-30cm

Length 19.7” (500mm) 21.6” (550mm) 23.6” (600mm) 21.6” (550mm) 23.6” (600mm)

Left 421221**4 423241**4 425261**4 427281**4 429301**4

Right 421222**4 423242**4 425262**4 427282**4 429302**4

Left Split Toe 421223**4 423243**4 425263**4 427283**4 429303**4

Right Split Toe 421224**4 423244**4 425264**4 427284**4 429304**4

56760 Color Swatch Book

g. Silskin

Lightweight elastic reinforcing silicone cosmetic cover. Caucasian (30G). Washable. Sold each. From Hosmer.

Leg Foot Thigh Calf Ankle Knee Center Item No.ò Style Size Size Circumf* Circumf Circumf to Floor

AK Small 5.5-7 16.5” 12.6” 7.5” 18.1” 59098

AK Medium 7.5-9 18.1” 14” 8.7” 18.3” 59099

AK Large 9.5-11 19.3” 15.7” 9.4” 19.5” 59100

AK Md w/Sm Foot 5.5-7 18.1” 14” 8.7” 18.3” 59102

BK Small 5.5-8 11.8” 7.3” 24” 59541

BK Medium 8.5-11 12.6” 8.3” 25.8” 59542

*Thigh circumference measured 8.3” (210cm) from knee center.



PR

OS

TH

ET

ICS

COSMETIC COVERS and SKINS — Continued

a. SoftTouch Protective Outer Surface Cover

SoftTouch Protective Outer Surface Cover from Ottobock features a special surface coating which improves

moisture and dirt resistance. They are pulled over the foam cover to add splash water resistance, dirt resistance

and enhance visual appearance. SoftTouch Stockings are extremely stretchable. They fit transtibial prostheses

and come in small, medium and large in 10 colors. They are ideal in combination with the Ottobock 6R8 or

6R18 PE Foam Covers. Please specify color when ordering by replacing (C) in item number with color code

Color Selection

0 2 4 6 8 10 12 14 16 18


Size Calf Circ Ankle Circ Foot Length Item No.ò 2 30-33cm 19-21cm > 21cm 99B116=2-(C)

2 34-39cm 22-25cm > 22cm 99B116=2-(C)

2 40-45cm 26-29cm > 25cm 99B116=2-(C)

646M22 SoftTouch Color Swatch Book

b. U-Flate Skin Sleeve

Flexible, durable and shrinkable with a proven track record of dependability, U-Flate skin sleeves are available

in 33 stock colors and four sizes to allow a custom look and feel with an off-the-shelf product. U-Flate skins

can also be custom ordered with the illusion of hair or freckles. Sold each. From PRS.

Standard Color Selection

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Realistic Color Selection

R05 R09 R13 R17 R21 R25 R29 R33 R37 R41 R45 R49 R53 R57 R61


Size X-Small Small Medium Large

Length 30” 36” 36” 36”

Ankle 6.25-12” 6.75-12” 9-16.5” 11” and up

Calf 8.75-16” 12.25-20” 15-25” 17” and up

Thigh 12-20” 14-22” 17.5-27” 19.5” and up

Minimum Foot Size 18cm 22cm 25cm 27cm

AK UFXS (color) UFS (color) UFM (color) UFL (color)

BK BKUFXS (color) BKUFS (color) BKUFM (color) BKUFL (color)

SWATCH-100502 Swatch Ring



PR

OS

TH

ET

ICS

c. Skinergy™ Plus

Skinergy™ Plus cosmesis with seamless design has a less tacky feel than other silicone products, improved

tear resistance and up to 25% stretch. Available for any foot with a split or closed toe design in sizes 22-30cm.

Lifelike toenails accept standard nail polish and remover. 19 skin tones to choose from. Easily cleaned with

soap and water. Length measured from floor. Sold each. From RSL Steeper.

Standard Color Selection

/E0 /E1 /E2 /E3 /E4 /E5 /E6 /E7 /E8 /E9

/E10 /E11 /E12 /E13 /E14 /E15 /E16 /E17 /E18


Foot Size 22-23cm 22-23cm 24-25cm 24-25cm 26-27cm 26-27cm 28-30cm 28-30cm

Skin Size Small Large Small Large Small Large Small Large

Ankle Range 20-25cm 20-25cm 22-27.5cm 22-27.5cm 22-28cm 22-28cm 24-30cm 248-30cm

Mid Calf Range 28-35cm 32-40cm 31-39cm 35-44cm 32-40cm 37-46cm 34-42.5cm 39-49cm

Top Range 26-32.5cm 30-37.5cm 29-36cm 33-41cm 30-37.5cm 35-44cm 32-40cm 37-46cm

Length to Calf 32cm 32cm 43.5cm 43.5cm 37cm 37cm 39.5cm 39.5cm

Length to Top 55cm 55cm 57cm 57cm 61cm 61cm 66cm 66cm

Foot Size 22-23cm 22-23cm 24-25cm 24-25cm 26-27cm 26-27cm 28-30cm 28-30cm

Split Toe Left TLC22LS TLC22LL TLC24LS TLC24LL TLC26LS TLC26LL TLC28LS TLC28LL

Split Toe Right TLC22RS TLC22RL TLC24RS TLC24RL TLC26RS TLC26RL TLC28RS TLC28RL

Closed Toe Left TNS22LS TNS22LL TNS24LS TNS24LL TNS26LS TNS26LL TNS28LS TNS28LL

Closed Toe Right TNS22RS TNS22RL TNS24RS TNS24RL TNS26RS TNS26RL TNS28RS TNS28RL

E24658 Swatch Ring NCT9740 25mm Punch Tool

E22630(Color) Patch Kit OPS-100 Skinergy Silicone Adhesive, .25 oz Tube

E22632(Color) Spare Patches (5)

d. Endoskeletal Cosmesis

Universal cosmesis shape for temporary or permanent application. Made of durable urethane for quick, easy

finishing. Easy access for alignment changes. For use with the following Seattle feet: Turas, Carbon LightFoot,

LightFoot², LightFoot² with Titanium Pyramid, LightFoot, Natural Foot or SACH Foot. Caucasian (pictured),

Light Brown or Dark Brown. Product height 26cm (sizes 22-25cm); 39cm (sizes 26-29cm). Sold each. From Trulife.

Foot Size 22cm 23cm 24cm 25cm

Caucasian, Left SEC201-22L SEC201-23L SEC201-24L SEC201-25L

Light Brown, Left SEC206-22L SEC206-23L SEC206-24L SEC206-25L

Dark Brown, Left SEC210-22L SEC210-23L SEC210-24L SEC210-25L

Caucasian, Right SEC201-22R SEC201-23R SEC201-24R SEC201-25R

Light Brown, Right SEC206-22R SEC206-23R SEC206-24R SEC206-25R

Dark Brown, RIght SEC210-22R SEC210-23R SEC210-24R SEC210-25R

Foot Size 26cm 27cm 28cm 29cm

Caucasian, Left SEC202-26L SEC202-27L SEC202-28L SEC202-29L

Light Brown, Left SEC207-26L SEC207-27L SEC207-28L SEC207-29L

Dark Brown, Left SEC211-26L SEC211-27L SEC211-28L SEC211-29L

Caucasian, Right SEC202-26R SEC202-27R SEC202-28R SEC202-29R

Light Brown, Right SEC207-26R SEC207-27R SEC207-28R SEC207-29R

Dark Brown, RIght SEC211-26R SEC211-27R SEC211-28R SEC211-29R



PR

OS

TH

ET

ICS

COSMETIC COVERS and SKINS — Continued

a. C-ME™ Pre-Sewn Prosthetic Sleeves and Lamination Panels

C-ME™ Pre-Sewn Prosthetic Sleeves slip over the BK prosthesis for an individual look and are available in

the fabrics below. These fabrics are also available as 20” x 20” Lamination Panels for custom fabrication use.

From New Options Sports.

Fabric Design American Flag Native Beads Yellow/Blue Wave Orange/Yel Wave

Sleeve Adult SM/MD CME SM D7263 CME SM DV1 CME SM R1 CME SM R2

Sleeve Adult MD/LG CME ML D7263 CME ML DV1 CME ML R1 CME ML R2

20” x 20” Panel CME LM D7263 CME LM DV1 CME LM R1 CME LM R2

Fabric Design Camouflage Red Lightning Blue Lightning Neon Lightning

Sleeve Adult SM/MD CME SM R3 CME SM R1501 CME SM R1502 CME SM R1507

Sleeve Adult MD/LG CME ML R3 CME ML R1501 CME ML R1502 CME ML R1507

20” x 20” Panel CME LM R3 CME LM R1501 CME LM R1502 CME LM R1507

Fabric Design Green Floral Red Flame Blue Flame Blue Sunshine

Sleeve Adult SM/MD CME SM R1511 CME SM R4500 CME SM R4501 CME SM R6501

Sleeve Adult MD/LG CME ML R1511 CME ML R4500 DISCON CME ML R6501

20” x 20” Panel CME LM R1511 CME LM R4500 CME LM R4501 CME LM R6501

Fabric Design Neon Graffiti Buttons and Bubbles Metallic Flag

Sleeve Adult SM/MD CME SM R7478 CME SM R7504 CME SM R8178

Sleeve Adult MD/LG CME ML R7478 CME ML R7504 CME ML R8178

20” x 20” Panel CME LM R7478 CME LM R7504 CME LM R8178

American Flag and Red Lightning

P R O S T H E T I C S Prosthetic Feet 6 8 3


PR

OS

TH

ET

ICS

PROSTHETIC FEET: CENTRI

b. Element Foot

The Element Foot sets itself apart from two spring prosthetic foot designs by adding an innovative third

element. Emotis has designed the Element to support each phase of foot function in the gait cycle—from

heel strike, to mid-stance, to toe off. The result is a foot with unsurpassed smoothness, stability and perfor-

mance throughout the gait cycle. Kit includes foot, heel bands and elastomers, Spectra sock, and instruction

manual. Centri® MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold

each. From Centri.

Size Clearance Ht Foot Wt Footshell Wt

22-24cm 72mm 260g 127g

25-28cm 88mm 360g 159g

29-30cm 88mm 420g 219g

Keel Selection Guide by Adjusted Patient Weight1

Size 22cm 23cm 24cm 25cm 26cm 27cm 28cm 29cm 30cm

100-119 lb A11 A11 A11 A32 A32 - - - -

120-139lb A11 A11 A11 A32 A32 A43 A43 - -

140-159lb A11 A11 A11 A32 A32 A43 A43 C64 C64

160-179lb A22 A22 A22 A43 A43 A43 A43 C64 C64

180-199lb A22 A22 A22 B43 B43 B54 B54 C64 C64

200-224lb A32 A32 A32 B53 B53 B54 B54 D75 D75

225-249lb - - - C54 C54 C65 C65 D75 D75

250-275lb - - - C64 C64 C65 C65 D75 D75

1Adjusted weight = patient body weight + loads normally or routinely carried.

Complete the item number below by choosing from options beneath t. (Example: 100-10-27-B43)

Item No. ð 100 - 10 - (Size) - (Keel)

Size t Keel t

22cm 22 A11 A11 23cm 23 A22 A22 24cm 24 A32 A32 25cm 25 A43 A43 26cm 26 A64 A64 27cm 27 B43 B43 28cm 28 B53 B53 29cm 29 B54 B54 30cm 30 B64 B64 C54 C54 C64 C64 C65 C65 D75 D75

Centri® MCV Foot Shell 2

2Caucasian default color. Custom colors available by special order with 3 week lead time.

Complete the item number below by choosing from options beneath t. (Example: 452713033)

Item No. ð (Side) (Size) 13033

Size t Keel t

Left 45 22cm 22 Right 46 23cm 23 24cm 24 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30


P R O S T H E T I C S6 8 4 Prosthetic Feet

PR

OS

TH

ET

ICS

PROSTHETIC FEET: CENTRI — Continued

a. Element DS Foot System

The Element Foot System’s third Element technology produces an incredibly smooth rollover. Adding the

DuraShock increases the vertical shock absorption and adds axial rotation. The elastomers and carbon com-

ponents work together to absorb, store and return energy in vertical and horizontal planes. The result is a

foot system that provides a high level function and requires only 6.5 inches of clearance. Kit includes Element

foot with DuraShock unit attached, Spectra sock, heel bands, wedge elastomers and instructions. Centri®

MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold each. From Centri.


22-24cm 142mm 550g 127g

25-29cm 158mm 660g 159g

30cm 158mm 760g 219g



100-119 lb A11R A11R A11R A32R A32R - - - -

120-139lb A11R A11R A11R A32R A32B A43B A43B - -

140-159lb A11R A11R A11R A32B A32B A43B A43K C64K C64K

160-179lb A22R A22B A22B A43B A43B A43K A43K C64K C64K

180-199lb A22B A22B A22B B43B B43K B54K B54K C64K C64K

200-224lb A32B A32K A32K B53K B53K B54K B54K D75K D75K

225-249lb - - - C54K C54K C65K C65K D75K D75K

250-275lb - - - C64K C64K C65K C65K D75K D75K



Item No. ð 105 - 10 - (Size) - (Keel) (DS)

Size t Keel t DS t

22cm 22 A11 A11 Red R 23cm 23 A22 A22 Blue B 24cm 24 A32 A32 Black K 25cm 25 A43 A43 26cm 26 A64 A64 27cm 27 B43 B43 28cm 28 B53 B53 29cm 29 B54 B54 30cm 30 B64 B64 C54 C54 C64 C64 C65 C65 D75 D75





Size t Keel t




PR

OS

TH

ET

ICS

b. Ibex Foot System

The Ibex Foot System’s innovative micro-slices in the Ibex pylon and the split heel plate provide controlled

inversion/eversion for terrain conformance. The multi-axis design is energy optimized with a long carbon pylon

and full length heel plate that allows the Ibex to reach foot flat sooner and store more energy. The unique

components of the Ibex work together from heel strike to toe off to provide stability without sacrificing

energy return. Includes foot, elastomer heel wedge, heel band, Spectra Sock and instruction manual. Centri®

MCV Foot Shell sold separately. Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold each. From Centri.

Specifications (Ibex) Weight Capacity: 330 lb Product Weight: 459g Activity Level: K3, K4 Build Ht: 6.75” (17cm)

Specifications (Ibex XD) Weight Capacity: 440 lb Product Weight: 602g Activity Level: K3, K4 Build Ht: 7.63” (19cm)



100-119 lb A2 A2 A2 B4 B4 - - - -

120-139 lb A2 A2 A2 B4 B4 C5 C5 - -

140-159 lb B3 B3 B3 B5 B5 C5 C5 D6 D6

160-179 lb B3 B3 B3 B5 B5 C6 C6 D6 D6

180-199 lb B4 A4 B4 C6 C6 C6 C6 D7 D7

200-224 lb B4 A4 B4 C6 C6 D7 D7 D7 D7

225-249 lb - - - D7 D7 D7 D7 E8 E8

250-275 lb - - - D7 D7 E8 E8 E8 E8

276-300 lb - - - E8 E8 E8 E8 E9 E9

301-330 lb - - - E8 E8 E8 E8 E9 E9

331-440 lb - - - E8XD E8XD E9XD E9XD E9XD E9XD


Complete the item number below by choosing from options beneath t. (Example: 120-10-27-C5)


Size t Keel t

22cm 22 A2 A2 23cm 23 B3 B3 24cm 24 B4 B4 25cm 25 B5 B5 26cm 26 C5 C5 27cm 27 C6 C6 28cm 28 D6 D6 29cm 29 D7 D7 30cm 30 E8 E8 E9 E9 E8XD E8XD E9XD E9XD





Size t Keel t




PR

OS

TH

ET

ICS

PROSTHETIC FEET: CENTRI — Continued

a. Wave Comfort Foot System™

The Wave Comfort Foot System brings an exceptional level of comfort to the low to moderate activity user.

The unique tri-spring design elements work in concert to provide seamless transition and stable progression

from heel-strike to toe-off. The coupled springs react in a compliant manner that promotes a supple feel while

maintaining the dynamic response expected in carbon composite feet. The novel wave spring and variable

durometer heel bumpers enhance stability at heel strike through shock absorption and plantar flexion as the

wave spring flexes and extends. The smooth action of the heel rocker combined with the stable dynamics

of the forefoot insure a “Wave of Comfort” from heel to toe. Rated to 275 lb. 3 year warranty. Centri® MCV

Foot Shell and pyramid adapters sold separately.Rated to 275 lb. Activity Level: K3, K4. 3 year warranty. Sold

each. From Centri.


22-23cm 96mm 320g 127g

24-26cm 102mm 346g 159g

27-30cm 102mm 424g 219g



44-50 kg B22 B22 B22 B23 B23 - - - -

51-60 kg B22 B22 B22 B23 B23 B34 B34 - -

61-70 kg B22 B22 B22 B34 B34 B34 B34 C45 C45

71-80 kg C33 C33 C33 B34 B34 C45 C45 C45 C45

81-90 kg C33 C33 C33 C45 C45 C45 C45 D56 D56

91-100 kg C33 C33 C33 C45 C45 D56 D56 D56 D56

101-112 kg - - - D56 D56 D56 D56 E67 E67

113-125 kg - - - D56 D56 D67 E67 E67 E67




Size t Keel t

22cm 22 B22 B22 23cm 23 B23 B23 24cm 24 B34 B34 25cm 25 C33 C33 26cm 26 C34 C34 27cm 27 C45 C45 28cm 28 D56 D56 29cm 29 D67 D67 30cm 30 E67 E67





Size t Keel t




PR

OS

TH

ET

ICS

PROSTHETIC FEET: CUSTOM CARBON COMPOSITE CREATIONS

b. SAFE II Foot

Solid Ankle Flexible Endoskeleton foot with defined toes. From Custom Carbon Composite Createions.

Height and Width Availability by Size

Height 22 23 24 25 26 27 28 29 30

3/4” W W W W W W W W W

3/8” N N W, N W, N W, N W, N W, N W, N W

1/4” W W W W W W W

Complete the item number below by choosing from options beneath t. (Example: S2SO38MW27R1)

Item No. ð S2 (Type) (Keel) (Height) (Heel) (Width) (Size) (Side) (Color)

Type t Keel t Height t Heel t Width t Size t Side t Color t

Standard S Std O 3/8” 38 Soft S Wide W 22cm 22 Left L Caucasian 1 Syme Y High R 3/4” 34 Med M Narrow N 23cm 23 Right R Lt Negroid 2 Adj Endo A Low Y 1/4” 14 Firm F 24cm 24 Md Negroid 3 Adj Exo X 25cm 25 Dk Negroid 4 Wproof W 26cm 26 Lt Latin 5 HD H 27cm 27 Med Latin 6 WP HD V 28cm 28 Dk Latin 7 WP Syme Z 29cm 29 30cm 30

PROSTHETIC FEET: HOSMER

c. Raize

The Raize is a unique microprocessor controlled hydraulic ankle/foot system in a low profile, lightweight

design. Its plantar/dorsi-flexion range reduces damaging forces on the residual limb and greatly enhances

stability on slopes and slippery surfaces. By simply pressing a button the wearer can control rollover resis-

tance, lock or unlock the ankle, and adjust the heel height as needed. Adjustable heel height, resistance and

lock via control pod or remote fob. Terrain accommodation mode aids gait on inclines and declines. Ankle

system simulates natural ankle movement and reduces shock. Intuitive computer interface for initial setup

by prosthetist. 2 year limited warranty. 6 month foot shell warranty. Sold each. From Hosmer.

Specifications Weight Capacity: 175 lb Product Wt: 735-797g Activity Level: K3 Build Height: 9-9.5cm”

Selection Guide by Patient Weight

Size 24cm 25cm 26cm 27cm 28cm 29cm 30cm

100-130 lb 62869 62872 62876 62880 62884 62917 -

131-160 lb 62870 62873 62877 62881 62885 62918 62921

161-190 lb 62871 62874 62878 62882 62886 62919 62922

191-220 lb - 62875 62879 62883 62916 62920 62923

Centri MCV Foot Shell (sold separately)


Left 452413033 452513033 452613033 452713033 452813033 452913033 453013033

Right 462413033 462513033 462613033 462713033 462813033 462913033 463013033



PR

OS

TH

ET

ICS

PROSTHETIC FEET: KINGSLEY

a. Low Profile Foot

Natural toes. 3/4” heel height. Eastern hard-rock maple keel. Sold each. From Kingsley.

Complete the item number below by choosing from options beneath t. (Example: K01L9M-4A)

Item No. ð (Type) (Side) (Size) (Heel) - (Color)

Description Type t Side t Size t Heel t Color t

Solid Ankle Cushioned Heel SACH K01 Left L 22cm 05 Soft S Caucasian Geriatric / Light Duty User Litefoot K09 Right R 23cm 06 Med M Cauc, Lt CL Stored Energy / Flexible Keel STEN K01ST 24cm 07 Firm F Negroid, Lt 4A Dynamic Elastic Response Steplite* KC01 25cm 08 Negroid, Dk 7A Ankle Disarticulation Syme’s K07 26cm 09 Latin L 500 lb w/Integrated Pyramid HD500 KT1 27cm 10 Oriental O 28cm 11 29cm 12 30cm 13 31cm 14 32cm 15 33cm 16

*KC01 available with Medium heel only.

b. Flattie Foot

Foot for flats, sandals and ski boots. Natural toes. 3/8” heel height. Eastern hard-rock maple keel. Sold each.

From Kingsley.




Solid Ankle Cushioned Heel SACH K051 Left L 22cm 05 Soft S Caucasian Geriatric / Light Duty User Litefoot K0951 Right R 23cm 06 Med M Cauc, Lt CL Stored Energy / Flexible Keel STEN K051ST 24cm 07 Firm F Negroid, Lt 4A Dynamic Response SACH Steplite* KC051 25cm 08 Negroid, Dk 7A 26cm 09 Latin L 27cm 10 Oriental O 28cm 11


c. Strider Foot

Foot for tennis shoes and men’s flatter-heeled shoes. Natural toes. 1/4-3/8” heel height. Eastern hard-rock

maple keel. Sold each. From Kingsley.




Solid Ankle Cushioned Heel SACH K08 Left L 22cm 05 Soft S Caucasian Geriatric / Light Duty User Litefoot K0908 Right R 23cm 06 Med M Cauc, Lt CL Stored Energy / Flexible Keel STEN K08ST 24cm 07 Firm F Negroid, Lt 4A Dynamic Elastic Response Steplite* KC08 25cm 08 Negroid, Dk 7A Ankle Disarticulation Syme’s K0708 26cm 09 Latin L 500 lb w/Integrated Pyramid HD500 KT8 27cm 10 Oriental O 28cm 11 29cm 12 30cm 13 31cm 14 32cm 15 33cm 16




PR

OS

TH

ET

ICS

d. Post-Op Flatfoot

Molded SACH foot for light duty barefoot walking and IPS weight bearing training. Plain toes. Flat heel.

Eastern hard-rock maple keel. Sold each. From Kingsley.

Complete the item number below by choosing from options beneath t. (Example: K10LM-4A)

Item No. ð K10 (Side) (Size) - (Color)

Description Type t Side t Size t Color t

Geriatric / Light Duty User Litefoot K10 Left L 24cm S Caucasian Right R 26cm M Cauc, Lt CL 28cm L Negroid, Lt 4A Negroid, Dk 7A Latin L Oriental O

PROSTHETIC FEET: NABTESCO-PROTEOR-USA

e. GERY Foot

The GERY foot from Proteor aims at providing very weak amputees with all the security they deserve by

ensuring comfort, lighter weight and easy step completion. The GERY foot is ideal for K1 patients with a

limited indoor walking perimeter. The innovative rigid rocker shaped core provides an easy gait and full

step completion and is fitted with pyramid connector. Made of closed-cell foam, the lightweight foot shell

is washable and resistant to dirt and humidity. The GERY foot is 30% lighter than an average SACH foot,

reducing heel lift efforts during walking. Sizes 22-27 are rated to 220 lb; sizes 28-29, to 275 lb. 10cm build

height. From Nabtesco-Proteor-USA.

Size 22cm 23cm 24cm 25cm

Max Weight 220 lb 220 lb 220 lb 220 lb (100kg) (100kg) (100kg) (100kg)

Left 1A200-G22 1A200-G23 1A200-G24 1A200-G25

Right 1A200-D22 1A200-D23 1A200-D24 1A200-D25

Size, Continued 26cm 27cm 28cm 29cm

Max Weight 220 lb 220 lb 275 lb 275 lb (100kg) (100kg) (125kg) (125kg)

Left 1A200-G26 1A200-G27 1A200-G28 1A200-G29

Right 1A200-D26 1A200-D27 1A200-D28 1A200-D29



PR

OS

TH

ET

ICS

PROSTHETIC FEET: TRULIFE

a. Seattle Catalyst

Designed for levels K3 and K4, the Seattle Catalyst provides shock absorption, controlled plantar flexion,

multi-axial rotation, smooth rollover and split keel stability in one lightweight package. Includes three

interchangeable heel wedges, one each: 1/4” (6.4mm), 3/8” (9.5mm) and 1/2” (12.7mm). Rated to 366 lb

(166kg). Minimum Clearance is 7.1” (18cm). Product weight 449g at 25cm. Foot shell, Spectra sock, shoe horn

and three heel wedges included. 3 year warranty on hard components; 6 month warranty on foot shell and

Spectra sock. From Trulife.

Suggested Keel Selection Guide

Activity Level Low Med-Low Medium Med-High High

Keel 5 296-366 lb 264-366 lb 226-366 lb 181-300 lb 131-220 lb (134-166kg) (120-166kg) (103-166kg) (82-136kg) (59-99kg)

Keel 4 231-295 lb 207-263 lb 151-225 lb 69-180 lb <131 lb (105-133kg) (94-119kg) (69-102kg) (31-81kg) (<59kg)

Keel 3 136 -230 lb 118-206 lb <151 lb <69 lb (62-104kg) (53-93kg) (<69kg) (<31kg)

Keel 2 <136 lb <118 lb (<62kg) (<53kg)

Weight ranges provided by Trulife.

Complete the item number below by choosing from options beneath t. (Example: SHF29027R3M7)

Item No. ð SHF (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)

Cosmesis t Size t Side t Keel t Length t Size Digit 2 t

Caucasian 290 22cm 22 Left L Keel 2 2 22-24cm S 22cm 2 Light Brown 291 23cm 23 Right R Keel 3 3 25-27cm M 23cm 3 Dark Brown 293 24cm 24 Keel 4 4 28-30cm L 24cm 4 25cm 25 Keel 5 5 25cm 5 26cm 26 26cm 6 27cm 27 27cm 7 28cm 28 28cm 8 29cm 29 29cm 9 30cm 30 30cm 0

Note: Choosing a lower keel than what is suggested in the Guidelines above will void the warranty. If your patient’s weight and/or activity level exceed the limits of the chart, please call Trulife for assistance.



PR

OS

TH

ET

ICS

b. Seattle LP Foot

The Seattle LP foot from Trulife is a low profile foot designed for long residual limbs. It features a multi-axial

ankle, c-shape design which replicates true, anatomical plantar flexion, a full length, split composite keel

for stability on uneven surfaces and removable foot shell. Recommended for medium to high activity K3-K4

amputees with a maximum weight of 300 lb (136kg) for medium activity level. Minimum clearance: 3.6” (9cm).

3/8” heel rise. Product weight 400g at 25cm (without foot shell). 3 year warranty on keel; 6 month warranty

on foot shell. Foot Shell, Spectra Sock and Bearing Kit included. From Trulife.



Keel 4 223-300 lb 223-300 lb 223-300 lb 194-260 lb 179-240 lb (Sizes 26-30) (101-136kg) (101-136kg) (101-136kg) (88-118kg) (81-109kg)



Keel 1 <132 lb <132 lb <132 lb <121 lb <110 lb (Sizes 22-30) (<60kg) (<60kg) (<60kg) (<55kg) (<50kg)


Complete the item number below by choosing from options beneatht. (Example: SLP35022L1S2)

Item No. ð SLP (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)


Caucasian 350 22cm 22 Left L Keel 1 1 22-24cm S 22cm 2 Light Brown 351 23cm 23 Right R Keel 2 2 25-27cm M 23cm 3 Dark Brown 353 24cm 24 Keel 3 3 28-30cm L 24cm 4 25cm 25 Keel 4 4 25cm 5 26cm 26 26cm 6 27cm 27 27cm 7 28cm 28 28cm 8 29cm 29 29cm 9 30cm 30 30cm 0


SAC350-02 LP Foot Ankle Cosmesis, Small (22-25cm)

SAC350-04 LP Foot Ankle Cosmesis, Large (26-30cm)



PR

OS

TH

ET

ICS

PROSTHETIC FEET: TRULIFE — Continued

a. Seattle Triumph

Designed of carbon composite, the Seattle Triumph provides the dynamic performance that Trulife’s high

performance feet are known for while adding features to save the practitioner time and money. The Seattle

Triumph is recommended for medium to high activity levels. It combines a split keel and S-shaped shank to

create a multi-axial ankle foot system with vertical shock absorption, smooth rollover and controlled plantar

flexion. Complete with integrated heel wedge, titanium pyramid and Spectra sock, Seattle Triumph comes

preassembled in a removable foot shell, making it ready to fit directly out of the box. Free 60 day trial. Recom-

mended for medium to high activity K3-K4 amputees with a maximum weight of 366 lb (136kg) for medium

activity level. 3/8” (9.5mm) heel rise. Product weight 493g at 25cm (without foot shell). 3 year warranty on

keel; 6 month warranty on foot shell. From Trulife.


Activity Level Med-Low Medium Med-High High

Definition Limited Walking on Light Running Walking Uneven Surface Sports Basketball

Keel 5 264-366 lb 226-366 lb 181-300 lb 131-220 lb (120-166kg) (103-166kg) (82-136kg) (59-99kg)

Keel 4 207-263 lb 151-225 lb 69-180 lb <131 lb (94-119kg) (68-102kg) (31-81kg) (<59kg)

Keel 3 118-206 lb <151 lb <69 lb (53-93kg) (<68kg) (<31kg)

Keel 2 <118 lb (<53kg)


Complete the item number below by choosing from options beneatht. (Example: STF19022L2S2)

Item No. ð STF (Cosmesis) (Size) (Side) (Keel) (Length) (Size Digit 2)


Caucasian 190 22cm 22 Left L Keel 1 1 22-24cm S 22cm 2 Light Brown 191 23cm 23 Right R Keel 2 2 25-27cm M 23cm 3 Dark Brown 193 24cm 24 Keel 3 3 28-30cm L 24cm 4 25cm 25 Keel 4 4 25cm 5 26cm 26 Keel 5 5 26cm 6 27cm 27 27cm 7 28cm 28 28cm 8 29cm 29 29cm 9 30cm 30 30cm 0




PR

OS

TH

ET

ICS

b. Seattle Energy

Recommended for functional level K3, Seattle Energy features a dynamic toe and cushioned heel response,

full length, split composite keel for increased stability and removable, lifelike, sandal-toe foot shell. Pre-

assembled with male pyramid for easy installation. Rated to 300 lb (136kg) for medium activity level. Product

weight 330g at 25cm (without foot shell). Minimum clearance 3.5” (9cm). 3/8” heel rise. 2 year warranty on

keel; 6 month warranty on foot shell. Foot bolt included. From Trulife.

Note: If the amputee has a long BK, carries heavy loads or will reach a higher activity level within a year,

choose the next category higher.

Category Selection Guide

Adjusted Patient Weight 221-300 lb 177-220 lb 133-176 lb <132 lb (101-136kg) (81-100kg) (61-80kg) (<60kg)

Category 4 3 2 1


Complete the item number below by choosing from options beneath t. (Example: SEF19022L1S2)

Item No. ð SEF (Cosmesis) (Size) (Side) (Category) (Length) (Size Digit 2)

Cosmesis t Size t Side t Category t Length t Size Digit 2 t

Caucasian 190 22cm 22 Left L 4 4 22-24cm S 22cm 2 Light Brown 191 23cm 23 Right R 3 3 25-27cm M 23cm 3 Dark Brown 193 24cm 24 2 2 28-30cm L 24cm 4 25cm 25 1 1 25cm 5 26cm 26 26cm 6 27cm 27 27cm 7 28cm 28 28cm 8 29cm 29 29cm 9 30cm 30 30cm 0




PR

OS

TH

ET

ICS


a. Seattle Carbon LightFoot®

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Carbon Light-

Foot® provides excellent dynamic response and improved ML compliance. It features a split composite keel,

high quality cosmesis and is available 3/8” heel rise. Product weight 373g at 25cm. Rated to 275 lb (124kg)

for medium activity level. Available in sizes 22-29cm (Carbon LightFoot Ladies sizes 22-28cm). Minimum clear-

ance: 1.5” (3.8cm) from keel top to cosmesis top. 2 year warranty on keel; 1 year warranty on foot shell. Foot

bolt included. From Trulife.



Keel N3 251-275 lb 211-275 176-270 lb 146-235 lb 126-200 lb (114-125kg) (96-125kg) (80-122kg) (66-106kg) (57-90kg)

Keel N2 150-250 lb 120-210 lb 100-175 lb 85-145 lb 75-125 lb (68-113kg) (54-95kg) (45-79kg) (38-65kg) (34-56kg)

Keel N1 <150 lb <120 lb <100 <85 <75 (<68kg) (<54kg) (<45kg) (<38kg) (<34kg)


Complete the item number below by choosing from options beneath t. (Example: SCF18526RN3)

Item No. ð SCF (Type) (Cosmesis) (Size) (Side) (Keel)

Type t Cosmesis t Size t Side t Keel t

Men’s 18 Caucasian 5 22cm 22 Left L Keel 1 N1 Ladies 19 Light Brown 6 23cm 23 Right R Keel 2 N2 Dark Brown 8 24cm 24 Keel 3 N3 25cm 25 26cm 26 27cm 27 28cm 28 29cm1 29

1Carbon LightFoot Ladies not available in 29cm.




PR

OS

TH

ET

ICS

b. Seattle LightFoot2 with Titanium Pyramid

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), The Seattle LightFoot2

with Titanium Pyramid arrives ready to install and features a natural looking, split-toe cosmesis. Rated to 300

lb (136kg) for medium activity level. 3/4” heel rise (SLF190, 191 and 193); 3/8” heel rise (SLF195, 196 and 198).

Minimum clearance: 3.5” (9cm). Product weight 480g at 25cm. 2 year warranty on keel; 1 year warranty on

foot shell. Foot Bolt, 2.5cm Foot Spacer and Foot Pyramid included. From Trulife.







Keel 5 <181 lb <131 lb <101 lb <81 lb <66 lb (<82kg) (<59kg) (<45kg) (<36kg) (<29kg)


Complete the item number below by choosing from options beneatht. (Example: SLF19322LG5)

Item No. ð SLF (Cosmesis) (Size) (Side) (Keel)

3/4“ Heel Cosmesis t Size t Side t Keel t

Caucasian 190 22cm 22 Left L Keel 5 G5 Light Brown 191 23cm 23 Right R Keel 6 G6 Dark Brown 193 24cm 24 Keel 7 G7 25cm 25 Keel 8 G8 26cm 26 Keel 9 G9 27cm 27 28cm 28 29cm 29 30cm 30


Caucasian 195 22cm 22 Left L Keel 5 H5 Light Brown 196 23cm 23 Right R Keel 6 H6 Dark Brown 198 24cm 24 Keel 7 H7 25cm 25 Keel 8 H8 26cm 26 Keel 9 H9 27cm 27 28cm 28 29cm 29




PR

OS

TH

ET

ICS


a. Seattle LightFoot2

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle LightFoot2 is

identical in appearance to the original Seattle LightFoot but features a modified Delrin® keel design which

provides enhanced rollover and durability. Appropriate for all lower extremity amputees, including Syme’s

with low to medium activity levels. Rated to 300 lb (136kg) for medium activity level. 3/4” heel rise (SLF160,

161 and 163); 3/8” heel rise (SLF165, 166 and 168). Minimum clearance: 1.5” (3.8cm) from keel top to cosmesis

top. Product weight 394g at 25cm. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included.

From Trulife.









Complete the item number below by choosing from options beneatht. (Example: SLF16527RH7)



Caucasian 160 22cm 22 Left L Keel 5 G5 Light Brown 161 23cm 23 Right R Keel 6 G6 Dark Brown 163 24cm 24 Keel 7 G7 25cm 25 Keel 8 G8 26cm 26 Keel 9 G9 27cm 27 28cm 28 29cm 29 30cm 30


Caucasian 165 22cm 22 Left L Keel 5 H5 Light Brown 166 23cm 23 Right R Keel 6 H6 Dark Brown 168 24cm 24 Keel 7 H7 25cm 25 Keel 8 H8 26cm 26 Keel 9 H9 27cm 27 28cm 28 29cm 29




PR

OS

TH

ET

ICS

b. Seattle LightFoot

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle LightFoot is

appropriate for all lower extremity amputees, including Syme’s with low to medium activity levels. Rated to

300 lb (136kg) for medium activity level. 3/4” heel rise (SLF130, 139 and 141); 3/8” heel rise (SLF135, 136 and

138). Minimum clearance: 1.5” (3.8cm) from keel top to cosmesis top. Product weight 435g at 25cm. 2 year

warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.



Keel 9 256-300 lb 251-300 lb 201-235 lb 170-200 lb (116-136kg) (114-13 kg) (91-106kg) (77-90kg)






Complete the item number below by choosing from options beneatht. (Example: SLF13527LF7)



Caucasian 130 22cm 22 Left L Keel 5 F5 Light Brown 139 23cm 23 Right R Keel 6 F6 Dark Brown 141 24cm 24 Keel 7 F7 25cm 25 Keel 8 F8 26cm 26 Keel 9 F9 27cm 27 28cm 28 29cm 29 30cm 30


Caucasian 135 22cm 22 Left L Keel 5 F5 Light Brown 136 23cm 23 Right R Keel 6 F6 Dark Brown 138 24cm 24 Keel 7 F7 25cm 25 Keel 8 F8 26cm 26 Keel 9 F9 27cm 27 28cm 28 29cm 29




PR

OS

TH

ET

ICS


a. Seattle Lifecast

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Lifecast was

the first energy storing, dynamic response foot with the “J” keel design. It features an advanced life-like

cosmesis developed from molds of real feet. 3/4” heel rise. Product weight 532g at 25cm. Minimum clearance

is 3-3/16” (8.1cm) for sizes 22-26cm and 3-3/8” (8.6cm) for sizes 27-29cm. Rated to 252 lb (114kg) for medium

activity level. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.


Foot Size 22cm 23-26cm 27-29cm

Keel A0S 95-110 lb (43.1-49.9kg)

Keel A1S 111-130 lb (50.0-59.0kg)

Keel A2S 131-150 lb (59.1-68.1kg)

Keel A3S 125-154 lb (56.8-69.9kg)

Keel A4S 155-185 lb (70.0-84.0kg)

Keel A5S 186-220 lb (84.1-99.9kg)

Keel A6S 221-252 lb (100-114.4kg)

Keel A3L 125-150 lb (56.8-68.1kg)

Keel A4L 151-180 lb (68.2-81.7kg)

Keel A5L 181-205 lb (81.8-93.1kg)

Keel A6L 206-245 lb (93.2-111.2kg)


Complete the item number below by choosing from options beneath t. (Example: SFH11027RA4L)

Item No. ð SFH (Cosmesis) (Size) (Side) (Keel)

Cosmesis t Size t Side t Keel t

Caucasian 110 22cm 22 Left L Keel A0S 1 A0S Light Brown 111 23cm 23 Right R Keel A1S 1 A1S Dark Brown 113 24cm 24 Keel A2S 1 A2S 25cm 25 Keel A3S 2 A3S 26cm 26 Keel A4S 2 A4S 27cm 27 Keel A5S 2 A5S 28cm 28 Keel A6S 2 A6S 29cm 29 Keel A3L 3 A3L Keel A4L 3 A4L Keel A5L 3 A5L Keel A6L 3 A6L

1Size 22cm only. 2Sizes 23-26cm. 3Sizes 27-29cm.

Note: Choosing a lower keel than what is suggested in the Guidelines above will void the warranty. If your patient’s weight exceeds the limits of the chart, please call Trulife for assistance.



PR

OS

TH

ET

ICS

b. Seattle Kinetic™

Designed for moderate K2 ambulators, the Kinetic Foot System features an integrated multi-axial ankle,

full length flexible keel, excellent ML compliance and plantar flexion and split toe cosmesis. System includes

integrated female proximal adapter for ease of adjustment and pylon with bonded pyramid adapter. Rated

to 300 lb (136kg) for medium activity level. 3/8” (9.5cm) heel rise. Minimum clearance is 28” (7cm). Product

weight 495 at 25cm. From Trulife.

Suggested Bumper Selection Guide by Patient Weight

Foot Size 22cm 23cm 24cm 25cm 26cm 27cm 28cm 29cm 30cm

220-300 lb (100-136kg) 3 3 4 4 4 4 4 4 4

177-220 lb (81-99kg) 2 2 3 3 3 3 3 3 3

132-176 lb (60-8-kg) 1 1 2 2 2 2 2 2 2

<132 lb (<60kg) 1 1 1 1 1 1 1 1 1

Complete the item number below by choosing from options beneath t. (Example: SKF20026R2)

Item No. ð SKF (Cosmesis) (Size) (Side) (Bumper)

Cosmesis t Size t Side t Bumper t

Caucasian 200 22cm 22 Left L 1 1 Light Brown 201 23cm 23 Right R 2 2 Dark Brown 203 24cm 24 3 3 25cm 25 4 4 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30




PR

OS

TH

ET

ICS


a. Seattle Ladies’ Foot

Recommended for functional level K2 or higher (HCFA approved for K3 or higher), the Seattle Ladies’ Foot is

a sculpted model of the Seattle Lifecast. It has a slim design and low profile, offering a better fit in women’s

and other narrower shoe styles. 3/8” heel rise. Minimum clearance is 3” (7.6cm). Rated to 245 lb (111kg) for

medium activity level. Product weight 538g at 25cm. 2 year warranty on keel; 1 year warranty on foot shell.

Foot bolt included. From Trulife.


<115 lb 115-135 lb 136-165 lb 166-195 lb 196-245 lb (<52kg) (52-61kg) (62-74kg) (75-89kg) (89-111kg)

22-24cm Keel B2S Keel B3S Keel B4S Keel B5S Keel B6S

25-28cm Keel B2L Keel B3L Keel B4L Keel B5L Keel B6L


Complete the item number below by choosing from options beneath t. (Example: SFH12024LB5S)

Item No. ð SFH (Cosmesis) (Size) (Side) (Keel)


Caucasian 120 22cm 22 Left L Keel B2S1 B2S Light Brown 121 23cm 23 Right R Keel B2S1 B3S Dark Brown 123 24cm 24 Keel B2S1 B4S 25cm 25 Keel B2S1 B5S 26cm 26 Keel B2S1 B6S 27cm 27 Keel B2S2 B2L 28cm 28 Keel B2S2 B3L Keel B2S2 B4L Keel B2S2 B5L Keel B2S2 B6L

1Sizes 22-24cm. 2Sizes 25-28cm.

Note: Choosing a lower keel than what is suggested in the Guidelines above will void the warranty. If your patient’s weight exceeds the limits of the chart, please call Trulife for assistance.



PR

OS

TH

ET

ICS

b. Seattle Natural Foot®

Recommended for functional level K1-K2, The Seattle Natural Foot® has the performance characteristics of a

compliant foot with the traditional LightFoot cosmesis and features a lightweight Delrin® keel. 3/8” heel rise.

Product weight 488g at 25cm. Minimum clearance is 3” (7.6cm). Rated to 225 lb (102kg) for medium activity

level. 2 year warranty on keel; 1 year warranty on foot shell. Foot bolt included. From Trulife.

Foot Size Guide 22cm 23cm 24cm 25cm 26cm 27cm 28cm 29cm

Length 8-5/8” 9” 9-3/8” 9-3/4” 10-3/16” 10-9-1/6” 11” 11-3/8” (21.9cm) (22.9cm) (23.8cm) (24.8cm) (25.9cm) (26.8cm) (27.9cm) (28.9cm)

Width 3-5/32” 3-1/4” 3-5/16” 3-3/8” 3-1/2” 3-9/16” 3-19/32” 3-21/32” (8cm) (8.2cm) (8.4cm) (8.6cm) (8.8cm) (9cm) (9.1cm) (9.3cm)


Complete the item number below by choosing from options beneath t. (Example: SNF15027RM)

Item No. ð SNF (Cosmesis) (Size) (Side) (Keel)


Caucasian 150 22cm 22 Left L Soft S Light Brown 151 23cm 23 Right R Medium M Dark Brown 153 24cm 24 Firm F 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30

c. Seattle SACH Foot

Recommended for functional level K1, the Seattle SACH Foot was designed to provide amputees with more

function and comfort than the standard SACH. It features a molded keel with a rocker bottom to allow for

easy rollover, and the LightFoot cosmesis. Available with 3/8” and 3/4” heel rise. Product weight 448g at

25cm. Rated to 225 lb (102kg) for medium activity level. 2 year warranty on keel; 1 year warranty on foot

shell. Foot bolt included. From Trulife.

Complete the item number below by choosing from options beneath t. (Example: SCH10027RM)

Item No. ð SCH (Cosmesis) (Size) (Side) (Keel)

3/8” Heel Cosmesis t Size t Side t Keel t

Caucasian 100 22cm 22 Left L Soft S Light Brown 101 23cm 23 Right R Medium M Dark Brown 103 24cm 24 Firm F 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29

3/4” Heel Cosmesis t Size t Side t Keel t

Caucasian 105 22cm 22 Left L Soft S Light Brown 106 23cm 23 Right R Medium M Dark Brown 108 24cm 24 Firm F 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30



PR

OS

TH

ET

ICS

PROSTHETIC FEET: WILLOWWOOD

a. Carbon Copy 2

Designed for levels K3 and K4, the Carbon Copy 2 foot incorporates a Kevlar®/nylon keel for increased

durability and longevity. Its dual spring design provides a smooth transition from heel to toe, allowing for

additional stability and added patient confidence. Product weight at 26cm without pyramid: 588g (men’s),

520g (women’s). Rated to 250 lb (113kg). One year warranty. Sold each. From WillowWood.

Toe Resistance Guide

Foot Size Very Low Low Regular

22-27cm Women’s <110 lb 111-150 lb 151-200 lb

23-25cm Men’s <120 lb 121-160 lb 161-230 lb

26-31cm Men’s <130 lb 131-170 lb 171-250 lb

Very Very Low and High toe resistance available by special order.

Complete the item number below by choosing from options beneath t. (Example: CC2M-26LB-2L-M)

Item No. ð CC (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Density)

Type t Size t Side t Color t Toe Res t Height t Density t

Men’s 2M 22cm2 22 Left L Buff B Very Low 2 3/8” L Soft S Women’s 2W 23cm 23 Right R Med Brn M Low 3 3/4”2 M Medium M 24cm 24 Tan T Regular 4 Firm F 25cm 25 26cm 26 27cm 27 28cm2 28 29cm2 29 30cm2 30 31cm2 31

2Men’s only. 3Women’s only.

b. Earthwalk™ 2 Foot and Ankle Kit

Designed for levels K1 and K2, the Earthwalk™ 2 system provides natural freedom of mobility with its flex-

ible keel and smooth motioned ankle. The “late stop” ankle feature allows for easy roll over so the foot can

maintain foot flat longer. This action is important for less active amputees who require more stability and less

dynamic response. Lightweight, durable and virtually maintenance-free. Three heel density inserts included.

Rated to 250 lb (113kg). One year warranty. From WillowWood.

Toe Resistance/Ankle Selection Guide

Toe Resistance Very Low Low Regular Very High

Adjusted Patient Weight <150 lb 151-175 lb 176-220 lb 221-250 lb

Ankle Red Blue Yellow Green

Complete the item number below by choosing from options beneath t. (Example: EWF2W-26LM-3H-Y)

Item No. ð EWF2 (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Ankle)

Type t Size t Side t Color t Toe Res t Height t Ankle t

Men’s M 22cm3 22 Left L Buff B Very Low 1 3/8” L Red R Women’s W 23cm 23 Right R Med Brn M Low 2 3/4”2 M Blue B 24cm 24 Tan T Regular 3 1-1/8”3 H Yellow Y 25cm 25 HIgh 4 Green G 26cm 26 27cm 27 28cm2 28 29cm2 29 30cm2 30 31cm2 31




PR

OS

TH

ET

ICS

c. DuraLite™ Foot

Designed for level K3, the DuraLite™ Foot is a lightweight foot with high energy return and offers easy

field-height adjustability. The foot incorporates a urethane toe pad which enhances medial and lateral mo-

tion. The split heel conforms to the floor and provides stability on uneven terrain. Mounted immediately

beneath the proximal adapter, the Stair Guard helps to reduce the risk of the shin adapter catching on a step

when descending stairs. Includes choice of pyramid adapter or pyramid receiver proximally. Three heel spring

wedges included with each foot. Rated to 300 lb (135kg) depending on foot size and activity level. Product

weight at 26cm: 356g (without proximal adapter, foot shell or Spectra sock). 3 year warranty on foot, 9 month

warranty on foot shell. Sold Each. From WillowWood.


Weight3 100-120 lb 121-150 lb 151-190 lb 191-230 lb 231-270 lb 271-300 lb (45-54kg) (55-68kg) (69-86kg) (87-104kg) (105-122kg) (123-135kg)

Activity Lev Med High Low Med High Low Med High Low Med High Low Med High Low Med

Foot Size

23-24cm 1 2 1 2 3 2 3 4 3 4 5 - - - - -

25-26cm 1 2 1 2 3 2 3 4 3 4 5 4 5 - - -

27-31cm 1 2 1 2 3 2 3 4 3 4 5 4 5 6 5 6


Complete the item number below by choosing from options beneath t. (Example: DLF-23LB-4L-1)

Item No. ð DLF - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)

Size t Side t Color t Toe Res t Height t Proximal Adapt t

23cm 23 Left L Buff B 1 1 3/8” L Pyramid 1 24cm 24 Right R Med Brn1 M 2 2 3/4” M Pyramid Rec 2 25cm 25 Tan1 T 3 3 26cm 26 4 4 27cm 27 5 5 28cm 28 6 6 29cm 29 30cm 30 31cm 31

1Medium Brown and Tan by special order only.



PR

OS

TH

ET

ICS

PROSTHETIC FEET: WILLOWWOOD — Continued

a. Fusion™ Foot

The unique design of WillowWood’s Fusion™ Foot allows the carbon fiber shank, heel and foot plate to work

together through each step rather than independently. As a result, the Fusion™ Foot delivers vertical shock

absorption, smooth heel-to-toe transition, inversion/eversion, and strong energy return all in one mechanism.

The foot comes standard with two interchangeable heel wedges that may be quickly and easily changed

during an office visit. The shank of the Fusion™ Foot may be trimmed to suit the patient’s limb length and

requires no drilling of holes. Available with choice of proximal adapter. One year warranty on foot; 9 month

warranty on foot shell. Sold each. From WillowWood.

Specifications

Weight Capacity: 300 lb Available Sizes: 23-31cm Activity Level: K3, K4 Heel Height: 3/8” or 3/4” Product Weight2: 360g

Product Height Max: 13.4” for 3/8” Heel Min: 6.6” for 3/8” Heel Min” 6.2” for 3/4” Heel

1Manufacturer suggested. 226cm, toe resistance 3, no footshell or adapter.


Weight3 100-120 lb 121-150 lb 151-190 lb 191-230 lb 231-270 lb 271-300 lb (45-54kg) (55-68kg) (69-86kg) (87-104kg) (105-122kg) (123-135kg)

Activity Lev Med High Low Med High Low Med High Low Med High Low Med High Low Med

Foot Size

23cm-24cm 1 2 1 2 3 2 3 4 3 4 5 - - - - -

25cm-26cm 1 2 1 2 3 2 3 4 3 4 5 4 5 - - -

27cm-31cm 1 2 1 2 3 2 3 4 3 4 5 4 5 6 5 6


Complete the item number below by choosing from options beneath t. (Example: CC2M-26LB-2L-M)

Item No. ð FFT - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)

Size t Side t Color t Toe Res t Height t Proximal Adapt t

23cm 23 Left L Buff B 1 1 3/8” L Pyramid 1 24cm 24 Right R Med Brn4 M 2 2 3/4” M Pyramid Rec 2 25cm 25 Tan4 T 3 3 26cm 26 4 4 27cm 27 5 5 28cm 28 6 6 29cm 29 30cm 30 31cm 31

4Medium Brown and Tan by special order only.

FFA-1001 Fusion Heel Adjustment Wedges, 23-26cm



FFA-1004 Fusion Replacement Bumpers and Snubbers



PR

OS

TH

ET

ICS

b. Impulse™ Foot

WillowWood calls the Impulse™ Foot the “high-tech solution at a value price”. The foot features a high-

performance composite foot plate attached to a Kevlar®/nylon keel which provides excellent flexibility and

high energy return. Three heel density inserts included with each foot. With its recessed keel, this foot can

be used for endoskeletal or exoskeletal applications. Rated to 350 lb (159kg). Product weight at 26cm: 453g

(men’s), 400g (women’s). One year warranty. Sold each. From WilloWood. See page 672 for Impulse™ Ankle.


Very Very Low Very Low Low Regular High HD 1 HD 2

<110 lb 111-150 lb 151-190 lb 191-230 lb 231-270 lb 271-310 lb 311-350 lb (<49kg) (50-68kg) (69-86kg) (87-104kg) (105-122kg) (123-140kg) (141-159kg)

Complete the item number below by choosing from options beneath t. (Example: IMPW-26LM-3H)

Item No. ð IMP (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)

Type t Size t Side t Color t Toe Resistance t Height t

Men’s M 22cm3 22 Left L Buff B Very Very Low 1 3/8” L Women’s W 23cm 23 Right R Med Brn M Very Low 2 3/4”2 M 24cm 24 Tan T Low 3 1-1/8”3 H 25cm 25 Regular 4 26cm 26 High 5 27cm 27 Heavy-Duty 1 6 28cm2 28 Heavy-Duty 2 7 29cm2 29 30cm2 30 31cm2 31

2LTC-1210 Impulse® Pyramid Spacer Block


c. Magnum Heavy-Duty Foot

Foot for amputees weighing up to 350 lb (159kg). Durable and reliable, while providing excellent response.

Lightweight, slim design with lifelike cosmesis. Rated to 350 lb (159kg) for levels K1-K3; 300 lb (137kg) for K4.

Clearance: 3.5” (8.89cm) foot only; 8” (20.32cm) complete system. One year warranty. From WillowWood.

Toe Resistance Guide Low Regular High

Adjusted Patient Weight 251-275 lb 276-300 lb 301-350 lb (114-124kg) (125-136kg) (137-159kg)

Complete the item number below by choosing from options beneath t. (Example: MHDM-26LM-6L)

Item No. ð MHD (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)

Type t Size t Side t Color t Toe Res t Height t

Men’s M 22cm3 22 Left L Buff B Low 6 3/8” L Women’s W 23cm 23 Right R Med Brn M Regular 7 3/4”2 M 24cm 24 Tan T High 8 25cm 25 26cm 26 27cm 27 28cm2 28 29cm2 29 30cm2 30 31cm2 31




PR

OS

TH

ET

ICS


a. Pathfinder® II

Designed for levels K3 and K4, the Pathfinder® II combines a toe spring, foot plate and a pneumatic heel

spring into a triangular configuration. This design provides shock absorption during heel strike without

diminishing the energy return of the toe spring, resulting in optimal flexibility, stability and comfort. An

improved bearing system at the proximal and distal ends of the heel spring alleviates medial/lateral loading

on the pneumatic cylinder and allows increased inversion/eversion in the foot. The Pathfinder® II Low profile

(pictured) is 1” shorter in overall height. Kit includes foot, foot shell, Spectra sock, hand pump, removal tool,

valve extension and choice of one proximal adapter. Rated to 350 lb (159kg) for K1-K3 and 300 lb (135kg) for

K4. Product weight at 26cm: 785g (without slide adjustment), 817g (with slide adjustment). 36 month war-

ranty on foot, 9 month warranty on foot shell.


3 4 5 6 7 84 94

100-135 lb 136-170 lb 171-205 lb 206-235 lb 236-280 lb 281-315 lb 316-350 lb (45-61kg) (62-77kg) (78-93kg) (94-106kg) (107-127kg) (128-143kg) (144-160kg)

Clearance* Standard Standard Low-Profile Low-Profile

Heel Height 3/4” (18mm) 3/8” (10mm) 3/4” (18mm) 3/8” (10mm)

Pathfinder II with Slide Adjustment

(1) w/Pyramid Adapter 9.5” (24.1cm) 9.8” (24.9cm) 8.5” (21.6cm) 8.8” (22.4cm)

(2) w/Pyramid Receiver Adapter 9.2” (23.4cm) 9.5” (24.1cm) 8.2” (20.8cm) 8.5” (21.6cm)

(3) w/Threaded 4-Hole Adapter 8.7” (22.1cm) 9.1” (23.1cm) 7.7” (19.6cm) 8.1” (20.6cm)

(4) w/Through-Hole Adapter w/Valve 8.7” (22.1cm) 9.1” (23.1cm) 7.7” (19.6cm) 8.1” (20.6cm)

Pathfinder II without Slide Adjustment

(5) w/Fixed Threaded 4-Hole Adapter 8.3” (21.1cm) 8.7” (22.1cm) 7.3” (18.5cm) 7.7” (19.6cm)

*From bottom of heel to top of proximal adapter.

Complete the item number below by choosing from options beneath t. (Example: PFLP-23LB-4L-1)

Item No. ð PF (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Prox Adapter)

Type t Size t Side t Color t Toe Res t Height t Prox Adapt t

Regular DR 23cm 23 Left L Buff B 3 3 3/8” L Pyramid 1 Low Pro LP 24cm 24 Right R Med Brn1 M 4 4 3/4” M Pyramid Rec 2 25cm 25 Tan1 T 5 5 Threaded 4H 3 26cm 26 6 6 4Hole w/Valve 4 27cm 27 7 7 Fixed 4Hole 5 28cm 28 84 8 29cm 29 94 9 30cm 30 31cm 31

1Medium Brown and Tan by special order only. 4Toe springs 8 and 9 are not available in sizes 23 and 24cm.

PFD-0113 Pathfinder II Threaded 4-Hole Adapter

PFD-0114 Pathfinder II Through 4-H Adapt w/Valve

PFD-0115 Pathfinder II Pyramid Adapter

PFD-0116 Pathfinder II Pyramid Receiver Adapter

PFD-1101 Pathfinder II Pneumatic Unit w/Bearing Kit

PFD-1103 Pathfinder II Heel Spring Bearing Kit

PFD-1108 Pathfinder Foot Shock

PFD-1109 Pathfinder II Pneumatic Heel Spring

PFD-1201 Pathfinder II Hand Pump for Pneumatic Spring

PFD-9001 Pathfinder II Transfer Block



PR

OS

TH

ET

ICS

b. Single Axis Foot

Designed for low activity levels K1 and K2, this strong, inexpensive foot is 10-20% lighter in weight than con-

ventional single axis feet. Features a molded-in titanium pyramid, a unisex, lifelike, water-resistant cosmesis

and interchangeable anterior and posterior bumpers in three durometers. Product weight 560g at 26cm.



Toe Resistance Low Regular High

Patient Weight <130 lb 131-180 lb 181-250 lb (<59kg) (60-81kg) (82-113kg)

Bumper Selection Guide

Anterior Anterior Anterior Posterior Posterior Posterior

Foot Size Soft Medium Firm Soft Medium Firm

22-23cm <120 lb 120-250 lb N/A <165 lb 166-250 lb N/A (<55kg) (55-113kg) N/A (<75kg) (76-113kg) N/A

24-25cm N/A <250 lb N/A <175 lb 176-250 lb N/A N/A (<113kg) N/A (<79kg) (80-113kg) N/A

26-27cm N/A <185 lb 186-250 lb N/A <195 lb 196-250 lb N/A (<84kg) (85-113kg) N/A (<89kg) (90-113kg)



Complete the item number below by choosing from options beneath t. (Example: SAA-26LB-2L-MM)

Item No. ð SAA - (Size) (Side) (Color) - (Toe Resistance) (Height) - (Ant Bumper) (Pos Bumper)

Size t Side t Color t Toe Res t Height t Ant t Post t

22cm 22 Left L Buff B Low 2 3/8” L Soft S Soft S 23cm 23 Right R Med Brn M Regular 3 3/4” M Med M Med M 24cm 24 Tan T High 4 Firm F Firm F 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30 31cm 31

SAF-00100 Single Axis Ankle, Endoskeletal

SAF-00130 Single Axis Ankle Anterior/Posterior Bumpers, 6/Set

SAF-00132 Single Axis Ankle Anterior Deflect Bumper, Medium

SAF-00134 Single Axis Ankle Anterior Deflect Bumper, Firm

SAF-00140 Single Axis Ankle Posterior Deflect Bumper, Soft

SAF-00142 Single Axis Ankle Posterior Deflec Bumper, Medium

SAF-00144 Single Axis Ankle Posterior Deflec Bumper, Firm



PR

OS

TH

ET

ICS


a. SACH Foot

With lightweight construction, attractive cosmesis and low price, the WillowWood SACH foot is an affordable

choice for levels K1 and K2. Three heel density inserts included with each foot. Available with or without

titanium pyramid. Product weight 491g at 26cm. Rated to 250 lb (113kg). One year warranty.


Toe Resistance Low Regular High

Adjusted Patient Weight <130 lb 131-180 lb 181-250 lb (<59kg) (60-81kg) (82-113kg)

Complete the item number below by choosing from options beneath t. (Example: SFT-22RB-3M)

Item No. ð SF (Type) - (Size) (Side) (Color) - (Toe Resistance) (Height)

Type t Size t Side t Color t Toe Res t Height t

W/O Pyramid T 22cm 22 Left L Buff B Low 2 3/8” L With Pyramid P 23cm 23 Right R Med Brn M Regular 3 3/4” M 24cm 24 Tan T High 4 25cm 25 26cm 26 27cm 27 28cm 28 29cm 29 30cm 30 31cm 31

ACCESSORY FEET

b. Trowbridge Terra-Round Foot

The Trowbridge Terra-Round accessory foot mounts directly inside a standard 30 mm pylon. The center stem

flexes allowing the unit to conform to uneven terrain. It is also useful in the lab when fitting the prototype

limb. The water-resistant unit has a traction base pad. From Ferrier Coupler Inc.

Item No. ð T5

T801 Stem T806 Upper O-Rings (2)

T802 Center Plate T807 Lower O-Ring

T803 Body T804 Standard Crepe and Vibram Sole

T810 Base Plate

c. KISS® Trainers™

Dynamic flexible keel stubby feet. Sold pair. From KISS®.

Item No. ð CMP27/A

P R O S T H E T I C S Lower Extremity Suspension 7 0 9


PR

OS

TH

ET

ICS

SUSPENSION BELTS

d. Knit-Rite Power Belt Auxiliary Suspension Belt™

Breathable and durable nylon/Lycra® squeezes prosthesis to the body from all directions. Low profile and

comfortable. This item is available in four styles. Original Power Belt (928), Gunslinger Waist (977) with bias

cut waistband for reduced roll-over, Bilateral Power Belt (956) and Adjustable Leg (991) with longer leg

length to allow for adjustable leg closure. Sold each. Note: Gunslinger style is universal.

Size X-Small Small Medium Large X-Large XX-Large

Fits Waist 21-28” 23-30” 30-42” 34-46” 38-52” 42-56”

Fits Leg 12-15” 15-20” 17-23” 19-25” 20-28” 22-30”+

Style Original w/Hand Loop Gunslinger Bilateral Adjustable Waist/Leg

Size Left Right Universal Left Right

X-Small 3L928LXS 3L928RXS 3L977UXS 3L956BXS 3L991LXS 3L991RXS

Small 3L928LSM 3L928RSM 3L977USM 3L956BSM 3L991LSM 3L991RSM

Medium 3L928LMD 3L928RMD 3L977UMD 3L956BMD 3L991LMD 3L991RMD

Large 3L928LLG 3L928RLG 3L977ULG 3L956BLG 3L991LLG 3L991RLG

X-Large 3L928LXL 3L928RXL 3L977UXL 3L956BXL 3L991LXL 3L991RXL

XX-Large 3L928L2X 3L928R2X 3L977U2X N/A N/A N/A

3L914E12 Knit-Rite Power Belt Extender (for sizes medium and up)

e. Knit-Rite Power Short Auxiliary Suspension Belt™

The Power Short Auxiliary Suspension Belt® option, with continuous waist configuration, eliminates the bulk

of Velcro® closures for the cosmetic appeal and comfort preferred by some patients. The improved design of

the adjustable leg version allows the leg to be more fully opened, eliminating donning limitations with the

previous design. The non-stretch Velcro® leg closure with this option allows a custom purchase of the socket

taper. The longer leg section provides greater socket containment. Sold each. From Knit-RIte.

Size X-Small Small Medium Large X-Large

Fits Waist 28-36” 30-38” 32-40” 34-42” 36-44”

Fits Leg 12-15” 15-20” 17-23” 19-25” 20-28”

Original Style

Item No. ð 3L911CLXS 3L911CSM 3L911CMD 3L911CLG 3L911CXL

Adjustable Leg Style

Item No. ð 3P911ALXS 3P911ASM 3P911AMD 3P911ALG 3P911AXL

f. CoolFlex AK Suspension Belt

Sold each. From Knit-Rite.

Size Small Medium Large

Item No. ð 3LCFAKSM 3LCFAKMD 3LCFAKLG


P r O S t h e t I C S7 1 0 Lower ExtremitySuspension

PR

OS

TH

ET

ICS

SUSPENSION BELTS — Continued

a. Total Elastic Suspension (TES) Belt™

The Original TES Belt™ features a wide 360° textured grip cuff and modified adductor panel for improved

lateral gripping. It evens out stress and eliminates the pull-down feeling of old girdle style belts. Two types

to choose from: Standard or Bilateral with two legs; and two styles: Regular—with solid sides, or Cut Away

at side hip area. Sold each. From Syncor. See page 545 for pediatric sizes.

Size X-Small Small Medium Large X-Large XX-Large

Waist* 27-32” 33-41” 37-48” 42-53” 48-59” 56-65”

Cuff* 13-17” 16-20” 19-23” 22-27” 26-32” 31-36”

Regular Style

Left TES-000-LN TES-100-LN TES-200-LN TES-300-LN TES-400-LN TES-500-LN

Right TES-000-RN TES-100-RN TES-200-RN TES-300-RN TES-400-RN TES-500-RN

Bilateral TES-000-BN TES-100-BN TES-200-BN TES-300-BN TES-400-BN TES-500-BN

With Cut Away

Left TES-000-LC TES-100-LC TES-200-LC TES-300-LC TES-400-LC TES-500-LC

Right TES-000-RC TES-100-RC TES-200-RC TES-300-RC TES-400-RC TES-500-RC

Bilateral TES-000-BC TES-100-BC TES-200-BC TES-300-BC TES-400-BC TES-500-BC

Extension TES-EXT-XS TES-EXT-S TES-EXT-M TES-EXT-L TES-EXT-XL TES-EXT-2X

*Circumference.

b. ProActive Wear Suspension Belt

Designed to provide the transfemoral amputee optimal comfort, suspension and rotational control. Ideal

form of primary suspension, ancillary rotational control for lanyard and liner wearers. Manufactured from

latex-free soft-grip neoprene against the skin with durable nylon outer layer and heavy-duty 2” nylon straps

with contact closure.

Size 24” 26” 28” 30”

Item No. ð 89-1450-000 89-1451-000 89-1452-000 89-1453-000

Size 32” 34” 36” 38”

Item No. ð 89-1454-000 89-1455-000 89-1456-000 89-1457-000

c. Flo-Tech® Waist Belt

Available for transfemoral or transtibial. Sold each. From Flo-Tech.

Transfemoral Left Right

Small TFWBLS TFWBRS

Medium TFWBLM TFWBRM

Large TFWBLL TFWBRL

Transtibial Left Right

Item No. ð TTWBL TTWBR



PR

OS

TH

ET

ICS

d. Transtibial Waist Belt

Adjustable from 30-44”. Sold each. From Fillauer.

Side Left Right

Item No. ð 129155 129148

e. Silesian Belt Kit

Two styles. Sold each. From Fillauer.


Universal (Includes hook and loop and chafes) (pictured) 129125

Reversible (Includes webbing belt w/chafe and D-ring, strap buckle, plate and screws) 129130

f. Adjustable BK Belt



Item No. ð 3LBK20LF 3LBK20RT

g. Knit-Rite BK Suspension Belt

44”. Sold each. From Knit-Rite.


Item No. ð 3M2KSBLF 3M2KSBRT

h. Post-Op BK Suspension Belt

Prosthetic webbing with elastic suspension. Cast attachment strap with buckle. One size fits up to 44”. Sold

each. From Trulife.

Side Left Right

Item No. ð 919050D 919051D



PR

OS

TH

ET

ICS

SUSPENSION BELTS — Continued

a. BK Waist Belt

2” (5cm) white cotton, lined with 1/8” (0.3) white felt. 2” (5cm) gray elastic suspension strap with 1” (2.5cm)

buckle. 43” (109cm) length. Includes detached Dacron®-reinforced leather waist billet. Sold each. From Trulife.

Side Left Right

Item No. ð 9208D 9209D

STRAPS

b. BK Suspension Strap

Adjustable strap secures prosthesis without wide joints and thick corsets. Top grade leather reinforced with

Dacron® tape. Includes buckle. Sold each. From Hosmer.

Side Left Right

Item No. ð 51477 51806

c. PTB Strap 920

Buckle closure with Dacron® reinforcement. Sold each. From Trulife.

Side Left Right

Smoked Elk, 18” (46cm) 209LL1-8SE-0920 209LR1-8SE-0920


d. PTB Strap 920A

Hook and loop closure with Dacron® reinforcement. Sold each. From Trulife.

Side Left Right

Smoked Elk, 18” (46cm) 209LL1-8SE-920A 209LR1-8SE-920A

Smoked Elk, 21” (53cm) 209LL2-1SE-920A 209LR2-1SE-920A

Embossed Elk, 21” (53cm) 209LL2-1EE-920A 209LR2-1EE-920A



PR

OS

TH

ET

ICS

e. PTB Strap 923

Elastic center and buckle closure. Sold each. From Trulife.

Side Left Right



Embossed Elk, 21” (53cm) 209LL2-1EE-0923 209LR2-1EE-0923

f. PTB Strap 923A

Elastic center and hook and loop closure. Smoked elk. Sold each. From Trulife.

Side Left Right

46cm (18”) 209LL1-8SE-923A 209LR1-8SE-923A

53cm (21”) 209LL2-1SE-923A 209LR2-1SE-923A

g. PTB Strap, Universal

A comfortable suspension strap with elastic center that can be converted to left or right. Includes fasteners

and leather fork strap for auxiliary belt suspension. Assembly required. Sold each. From Trulife.

Style Item No.ò

Hook and Loop Closure 209L00-SE9-19AF

Buckle Closure 209L00-0SE-919F

h. PTB Strap with Elastic Center

A comfortable suspension strap with elastic center. Universal side and size. Available with hook and loop or

buckle closure. Assembly required. Sold each. From Trulife.

Style Item No.ò

Hook and Loop Closure 209L00-0SE-919A

Buckle Closure 209L00-00S-E919

i. Leather Billet

9-10 oz russet leather. Sold each. From Trulife.


3/4” (2cm) Width, 11” (28cm) Length 209LRU911

1” (2.5cm) Width, 11” (28cm) Length 209LRU910

1” (2.5cm) Width, 7” (18cm) Length 209LRU914



PR

OS

TH

ET

ICS

STRAPS — Continued

a. BK Fork Strap

9-10 oz russet leather. Sold each. From Trulife.


5/8” (1.5cm) Width, 19” (48cm) Length 209L06-259-010A

3/4” (2cm) Width, 21” (53cm) Length 209L07-500-901A

b. BK Fork Strap with Elastic

3/4” U-shaped 9-10 oz russet leather. 2” x 4-1/2” (5cm x 11cm) exposed elastic. 18” (46cm) length. Sold each.

From Trulife.

Item No. ð 209L01-000-901B

SUSPENSION SLEEVES

c. ProActive Wear® Knee Sleeve, 100 Series

ProActive Wear® Knee Sleeves for auxiliary suspension are now manufactured of abrasion-resistant, soft,

durable, G231 neoprene—the same fabric used to make wet suits for coral divers. The 100 Series has a nylon

exterior and a 3mm neoprene interior. Three colors; pictured here in Khaki. Sold each.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23

*Circumference measured in inches, 4” above knee center.

Size Khaki Dark Brown Tan

0000 NKS-100-0000 NKS-101-0000 PKS-100-0000

000 NKS-100-000 NKS-101-000 PKS-100-000

00 NKS-100-00 NKS-101-00 PKS-100-00

0 NKS-100-0 NKS-101-0 PKS-100-0

1 NKS-100-1 NKS-101-1 PKS-100-1

1.5 NKS-100-15 NKS-101-15 PKS-100-15

2 NKS-100-2 NKS-101-2 PKS-100-2

2.5 NKS-100-25 NKS-101-25 PKS-100-25

3 NKS-100-3 NKS-101-3 PKS-100-3

3.5 NKS-100-35 NKS-101-35 PKS-100-35

4 NKS-100-4 NKS-101-4 PKS-100-4

5 NKS-100-5 NKS-101-5 PKS-100-5



PR

OS

TH

ET

ICS

d. ProActive Wear® Knee Sleeve, 200 Series


durable, G231 neoprene—the same fabric used to make wet suits for coral divers. The 200 Series has a nylon

exterior and interior. Three colors; pictured here in Khaki. Sold each.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23



0000 NKS-200-0000 NKS-201-0000 PKS-200-0000

000 NKS-200-000 NKS-201-000 PKS-200-000

00 NKS-200-00 NKS-201-00 PKS-200-00

0 NKS-200-0 NKS-201-0 PKS-200-0

1 NKS-200-1 NKS-201-1 PKS-200-1

1.5 NKS-200-15 NKS-201-15 PKS-200-15

2 NKS-200-2 NKS-201-2 PKS-200-2

2.5 NKS-200-25 NKS-201-25 PKS-200-25

3 NKS-200-3 NKS-201-3 PKS-200-3

3.5 NKS-200-35 NKS-201-35 PKS-200-35

4 NKS-200-4 NKS-201-4 PKS-200-4

5 NKS-200-5 NKS-201-5 PKS-200-5

e. ProActive Wear® Knee Sleeve, 300 Series


durable, G231 neoprene—the same fabric used to make wet suits for coral divers. Nylon exterior. Interior

consists of nylon center and 3mm neoprene proximal and distal. Three colors; pictured here in Tan. Sold each.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23



0000 NKS-300-0000 NKS-301-0000 PKS-300-0000

000 NKS-300-000 NKS-301-000 PKS-300-000

00 NKS-300-00 NKS-301-00 PKS-300-00

0 NKS-300-0 NKS-301-0 PKS-300-0

1 NKS-300-1 NKS-301-1 PKS-300-1

1.5 NKS-300-15 NKS-301-15 PKS-300-15

2 NKS-300-2 NKS-301-2 PKS-300-2

2.5 NKS-300-25 NKS-301-25 PKS-300-25

3 NKS-300-3 NKS-301-3 PKS-300-3

3.5 NKS-300-35 NKS-301-35 PKS-300-35

4 NKS-300-4 NKS-301-4 PKS-300-4

5 NKS-300-5 NKS-301-5 PKS-300-5



PR

OS

TH

ET

ICS

SUSPENSION SLEEVES — Continued

a. ProActive Wear® Knee Sleeve, 400 Series


durable, G231 neoprene—the same fabric used to make wet suits for coral divers. Nylon exterior with strap.

Interior consists of nylon proximal and center; 3mm neoprene distal. Three colors; pictured here in Dark

Brown. Sold each.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23



0000 NKS-400-0000 NKS-401-0000 PKS-400-0000

000 NKS-400-000 NKS-401-000 PKS-400-000

00 NKS-400-00 NKS-401-00 PKS-400-00

0 NKS-400-0 NKS-401-0 PKS-400-0

1 NKS-400-1 NKS-401-1 PKS-400-1

1.5 NKS-400-15 NKS-401-15 PKS-400-15

2 NKS-400-2 NKS-401-2 PKS-400-2

2.5 NKS-400-25 NKS-401-25 PKS-400-25

3 NKS-400-3 NKS-401-3 PKS-400-3

3.5 NKS-400-35 NKS-401-35 PKS-400-35

4 NKS-400-4 NKS-401-4 PKS-400-4

5 NKS-400-5 NKS-401-5 PKS-400-5

b. Latex Rubber Knee Sleeve

Sold each.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23


Size Regular Heavy-Duty

0000 1050-0000 1050-ST-0000

000 1050-000 1050-ST-000

00 1050-00 1050-ST-00

0 1050-0 1050-ST-0

1 1050-1 1050-ST-1

1.5 1050-15 1050-ST-15

2 1050-2 1050-ST-2

2.5 1050-25 1050-ST-25

3 1050-3 1050-ST-3

4 1050-4 1050-ST-4

5 1050-5 1050-ST-5



PR

OS

TH

ET

ICS

c. EasySleeve™ Super Stretch SLE

The EasySleeve Super Stretch has no restraining cover to limit the ALPS EasyGel™ from moving with the

user. 6mm thickness. Spandex cover to keep dirt and clothes away from gel available separately. Sold each.

From ALPS.

Size XX-Small X-Small Small Medium Large Large X-Large

Circumference* 10-15cm 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-37cm

Sleeve SLE-10 SLE-16 SLE-20 SLE-24 SLE-26 SLE-28 SLE-32

Cover - CSLE-16 CSLE-20 CSLE-24 - CSLE-28 CSLE-32

*Circumference measured 10cm above patella.

d. EasySleeve™ Fabric Reinforced SFR

Features an integrated high performance fabric cover and ALPS EasyGel™. Achieves secure suspension by

sealing with the skin while allowing freedom of movement throughout knee flexion. Available in 3mm and

6mm thickness in both Regular and Sticky, with a slightly tacky feel. From ALPS.

Size XX-Small X-Small Small Medium Med + Large X-Large 2X 3X

Circumf* 16-19cm 20-24cm 25-30cm 31-34cm 35-37cm 36-40cm 41-45cm 46-60cm 61-70cm

3mm SFR16-3 SFR16-3 SFR20-3 SFR24-3 SFR26-3 SFR28-3 SFR32-3 SFR38-3 SFR44-3

3mm Sticky SFS16-3 SFS16-3 SFS20-3 SFS24-3 SFS26-3 SFS28-3 SFS32-3 SFS38-3 SFS44-3

6mm SFR16-6 SFR16-6 SFR20-6 SFR24-6 SFR26-6 SFR28-6 SFR32-6 SFR38-6 SFR44-6

6mm Sticky SFS16-6 SFS16-6 SFS20-6 SFS24-6 SFS26-6 SFS28-6 SFS32-6 SFS38-6 SFS44-6


e. Transparent ClearLine SL

No outer fabric. Transparent silicone construction allows for visual verification of fit. 2mm thickness reduces

bunching behind the knee. Sold each. From ALPS.

Size Small Medium Large X-Large 2X

Circumference* 24-29cm 30-35cm 36-39cm 40-43cm 44-51cm

Item No. ð SL-S SL-M SL-L SL-XL SL-XXL


f. Reinforced ClearLine SLR

Integrated outer fabric improves strength and durability while allowing freedom of movement. 2mm thick-

ness reduces bunching behind the knee. Available in three colors. Sold each. From ALPS.

Size Small Medium Large X-Large 2X 3X 4X 5X

Circ* 28-32cm 33-34cm 35-37cm 38-40cm 41-45cm 46-51cm 53-57cm 58-64cm

Beige SLR-S SLR-M SLR-L SLR-XL SLR-2XL SLR-3XL SLR-4XL SLR-5XL

Negroid SLR-S-N SLR-M-N SLR-L-N SLR-XL-N SLR-2XL-N SLR-3XL-N SLR-4XL-N SLR-5XL-N

Black SLR-S-BL SLR-M-BL SLR-L-BL SLR-XL-BL SLR-2XL-BL SLR-3XL-BL SLR-4XL-BL SLR-5XL-BL




PR

OS

TH

ET

ICS


a. Extreme Sleeve Fabric Reinforced SFK

Extreme Sleeve Fabric Reinforced has superior comfort provided by ALPS™ GripGel. The SFK has limited

vertical stretch and the elasticity of the fabric still allows the user excellent freedom of knee flexion. The

Extreme sleeve also achieves secure suspension by sealing with the skin without restricting circulation, while

the GripGel sticks to the patient’s skin without causing shear forces. The grip will help prevent the sleeve

from rolling down the patient’s limb because of the nature of the GripGel. Sold each. From ALPS.

Size X-Small Small Medium Large Large X-Large XX-Large XXX-Large

Circumference* 20-24cm 25-30cm 31-34cm 35-37cm 38-40cm 41-45cm 46-60cm 61-70cm

3mm SFK16-3 SFK20-3 SFK24-3 SFK26-3 SFK28-3 SFK32-3 SFK38-3 SFK44-3

6mm SFK16-6 SFK20-6 SFK24-6 SFK26-6 SFK28-6 SFK32-6 SFK38-6 SFK44-6


b. VIVA Sleeve

The ALPS VIVA (Valve Integrated Vacuum Activated) Sleeve has a built-in valve to evacuate air in the socket,

minimizing compression and irritation proximally. Allows freedom of movement through knee flexion.

Durable high performance fabric cover. Available in 6mm and 3mm thickness. Beige. Sold each. From ALPS.

Size X-Small Small Medium Med+ Large X-Large

Circumference* 20-24cm 25-30cm 31-34cm 35-37cm 36-40cm 41-45cm

3mm VIVA16-3 VIVA20-3 VIVA24-3 VIVA26-3 VIVA28-3 VIVA32-3

6mm VIVA16-6 VIVA20-6 VIVA24-6 VIVA-26-6 VIVA28-6 VIVA32-6


c. Comfort Endurance™ ZipSleeve

The Comfort ZipSleeve is the newest addition to the family of Comfort Endurance Suspension Sleeves.

ZipSleeves “add a little zip” for geriatric patients who may be wearing a neoprene suspension sleeve. Gone

are the days for the geriatric patient with the struggle of tugging and rolling endlessly to get their sleeve in

place. Simply zip it up! 15” (38cm) length. Black or beige. Sold each. From Comfort Products.

Size 00 0 1 1.5 2 2.5 3 4 5

Circumf* 9-10” 10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”

Black SUZ00 SUZ0 SUZ1 SUZ15 SUZ2 SUZ25 SUZ3 SUZ4 SUZ5

Beige SUZB00 SUZB0 SUZB1 SUZB15 SUZB2 SUZB25 SUZB3 SUZB4 SUZB5

*Circumference measured 4” above knee center.

d. Comfort Endurance™ CRITERION

The CRITERION features a smooth skin lining that gives superior comfort against the skin and reduces the

chance for popliteal bunching. For patients without strenuous activity levels, the CRITERION is an excellent

choice for comfort and durability. 15” (38cm) length. Black or beige. Sold each. From Comfort Products.

Size 00 0 1 1.5 2 2.5 3 4 5

Circumf* 9-10” 10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”

Black SUC00 SUC0 SUC1 SUC15 SUC2 SUC25 SUC3 SUC4 SUC5

Beige SUCB00 SUCB0 SUCB1 SUCB15 SUCB2 SUCB25 SUCB3 SUCB4 SUCB5




PR

OS

TH

ET

ICS

e. Comfort Endurance™ Sport

The SPORT has all of the features of the CRITERION with the added benefit of a nylon lined center section

to reduce abrasion. This design allows the sleeve to give excellent suspension in even the most demanding

of conditions. For patients with less active lifestyles, try the Endurance CRITERION. 15” (38cm) length. Black

or beige. Sold each. From Comfort Products.

Size 00 0 1 1.5 2 2.5 3 4 5

Circumf* 9-10” 10.5-12” 12.5-14” 13.5-15” 14.5-16” 15.5-17” 16.5-18” 18.5-20” 20.5-22”

Black SUS00 SUS0 SUS1 SUS15 SUS2 SUS25 SUS3 SUS4 SUS5

Beige SUSB00 SUSB0 SUSB1 SUSB15 SUSB2 SUSB25 SUSB3 SUSB4 SUSB5


f. FlexiSleeve™

A comfortable, durable and cost effective alternative to straight suspension sleeves. Use with or without a

BK suction valve. Flex Suspension sleeves provide a secure connection of the prosthesis to the limb and are

preflexed at 43° to allow for natural unrestricted movement. FlexiSleeve™ is designed for maximum comfort

and mobility for all levels of activity. Available in Chocolate (-C), Tan (-T) or Black (-B). Specify color when

ordering. Sold each. From ESP.

Size 0 1 1.5 2 2.5 3 4 5

Circumf* 10.5-12.5” 11.5-13” 12.5-14” 14-16” 15-17” 16-18” 18.5-20” 21-23”

Item No. ð KS-ESP-0- KS-ESP-1 KS-ESP-1.5 KS-ESP-2 KS-ESP-2.5 KS-ESP-3 KS-ESP-4 KS-ESP-5

*Circumference measured 5” above patella.

g. FlexiSport™

A comfortable, durable and cost effective alternative to straight suspension sleeves. Use with or without a

BK suction valve. Flex Suspension sleeves provide a secure connection of the prosthesis to the limb and are

preflexed at 43° to allow for natural unrestricted movement. FlexiSport™ features a nylon reinforced knee

inside and out for higher activity levels. Black only. Specify size when ordering. Sold each. From ESP.

Size 0 1 1.5 2 2.5 3 4 5

Circumf* 10.5-12.5” 11.5-13” 12.5-14” 14-16” 15-17” 16-18” 18.5-20” 21-23”

Item No. ð KS-ESP-S-(Size)-B


h. ContexGel Knee Sleeve

ContexGel Knee Sleeves can be used for BK amputees as a suspension sleeve or as a sealing-mechanism

for vacuum sockets. The anatomical shape allows for an all-around 3mm material thickness. Therefore the

ContexGel Knee Sleeve stays elastic and with its comfortable posterior sewing eliminates posterior pressure.

The new Streifeneder Polymer Gel SPG offers a supreme seal and stretch. The abrasion resistant textile al-

lows easy handling for donning and doffing (up and down). 350mm length. Blonde or gray color. Sold each.

From Euro International.

Size Small Medium Large X-Large 2X-Large

Distal Measure 15-23cm 21-31cm 28-43cm 34-51cm 38-55cm

Proximal Measure 23-25cm 29-44cm 36-52cm 42-61cm 43-74cm

Blonde 3S10/S 3S10/M 3S10/L 3S10/XL 3S10/XXL

Gray 3S20/S 3S20/M 3S20/L 3S20/XL 3S20/XXL

Protective Cover 3S50/S 3S50/S 3S50/L 3S50/XL 3S50/XXL



PR

OS

TH

ET

ICS


a. Juzo® Supsension Sleeves

Juzo Suspension Sleeves are designed to increase a person’s feeling of security and provide a smooth transition

from the prosthesis to the limb. 30-40 mmHg compression. Specify size when ordering. Sold each. From Juzo.

Length 12” 14” 16”

Item No. ð 3232DF (Size) 3232 DG (Size) 3232DGE (Size)

Sizing Guide

Size 4 5 6 7 8 9 10 11 12 14

12” Length

F Measure1 38cm 39.5cm 41cm 42.5cm 44cm 45.5cm 47cm 48.5cm 50cm 53cm

E Measure2 31cm 32.5cm 34cm 35.5cm 37cm 38.5cm 40cm 41.5cm 43cm 46cm

D Measure3 28cm 29.5cm 31cm 32.5cm 34cm 35.5cm 37cm 38.5cm 40cm 43cm

16” above knee center. 2Knee center. 36” below knee center.

14” Length

G Measure4 42cm 43.5cm 45cm 46.5cm 48cm 49.5cm 51cm 52.5cm 54cm 57cm



47” or 8” above knee center. 5Knee center. 66” below knee center.

16” Length

G Measure4 42cm 43.5cm 45cm 46.5cm 48cm 49.5cm 51cm 52.5cm 54cm 57cm



47” or 8” above knee center. 5Knee center. 66” below knee center.

b. EPX Suspension Sleeve

A low profile sleeve made of breathable waterproof material. Heavy-Duty style features a 1.5” silicone band

at proximal and distal ends of sleeve. Premium Heavy-Duty style features an additional silicone band and

elastic strap at proximal end of sleeve. Hand wash. Sold each. From Lohmann & Rauscher.

Size 00 0 1 1.5 2 2.5 3 4 5

Circ* 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23

*Circumference measured in inches, 8” proximal to mid patella.

Heavy-Duty Heavy-Duty Premium HD Premium HD Size Caucasian Black Caucasian Black

00 3MEVSC00 3MEVSB00 3MEPSC00 3MEPSB00


1 3MEVSC10 3MEVSB10 3MEPSC10 N/A

1.5 3MEVSC15 3MEVSB15 3MEPSC15 3MEPSB15


2.5 3MEVSC25 3MEVSB25 3MEPSC25 3MEPSB25






PR

OS

TH

ET

ICS

c. Suspension Sleeve K55

1/8” neoprene with Lycra mid section. Sold each. From New Options Sports.

Size 0000 000 00 0 1 1.5 2 2.5 3 4 5

Circ* 7-8.5 8-9.5 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16 15-17 16-18 18.5-20 21-23


Size Khaki Black Tan

0000 K55-KHAKI-0000 K55-BLACK-0000 K55-TAN-0000





1.5 K55-KHAKI-15 K55-BLACK-15 K55-TAN-15


2.5 K55-KHAKI-25 K55-BLACK-25 K55-TAN-25




d. Martin Suspension Sleeve

3/16” neoprene with proximal front closure and straps. Not airtight. Sold each. From New Options Sports.

Size 00 0 1 1.5 2

Circ* 9-10.5 10.5-12.5 11.5-13 12.5-14 14-16

Item No. ð K77-TAN-00 K77-TAN-0 K77-TAN-1 K77-TAN-15 K77-TAN-2

Size 2.5 3 4 5

Circ* 15-17 16-18 18.5-20 21-23

Item No. ð K77-TAN-25 K77-TAN-3 K77-TAN-4 K77-TAN-5

*Circumference measured in inches, 5” above knee.

e. Gel Suspension Sleeve

R&B Medical Gel Suspension Knee sleeves provide the perfect balance of comfort and durability. Special

formulation of high performance gel is skin friendly while offering a good seal to securely hold your pros-

thesis in place. Low profile seam and stretch of the fabric allow for easy flexion of the knee without adding

too much bulk. Superior bond between the gel and fabric limits delaminating. Fabric slides easily against

itself to allow for easy donning. 350mm length. 3mm gel thickness. 6 month warranty. Available in blue (-B),

Dark Gray (-DG), Light Gray (-LG) and Tan (-T). Specify color when ordering. Sold each. From R&B Medical.


Size Code XS S M L XL XXL XXXL

Proximal1 16-24cm 23-35cm 29-44cm 36-52cm 42-61cm 43-74cm 55-80cm

Distal2 10-17cm 15-23cm 21-31cm 29-43cm 34-51cm 38-55cm 42-62cm

Item No. ð 10-RBW80-(Size)-(Color)

1Measured 15cm proximal to MPT. 2Measured 15cm distal to MPT.



PR

OS

TH

ET

ICS


a. BK Gel Suspension Sleeve™

Standard or reinforced center fabric for added durability. Both are fully lined with Silipos® medical-grade

mineral oil gel. Sold each. From Silipos.

Flat Size 4” 5” 6” 7.5”

Length 12” 14” 16” 16”

Standard 13055 13065 13075 13085

Heavy Duty 1310 1311 1312 N/A

b. DuraGel™ Suspension Sleeve

Features a flexible yet durable outer material and mineral oil gel to moisturize and condition the skin. 3mm

gel thickness. Standard or Reinforced for added durability. Available in five sizes. From Silipos.

Size Medium Medium+ Med+ Dist+* Large Large+

Proximal (Relaxed) 9” (23cm) 14.25” (36cm) 14.25” (36cm) 13.5” (34cm) 16.25” (41cm)

Proximal (Fully Stretched) 18” (46cm) 26.75” (68cm) 26.75” (68cm) 24” (61cm) 28” (71cm)

Distal (Relaxed) 7.75” (19cm) 9.25” (23cm) 10.5” (27cm) 12” (31cm) 11.25” (29cm)

Distal (Fully Stretched) 14.25” (36cm) 16” (40cm) 17” (43cm) 18” (46cm) 20” (51cm)

Standard 18181 18182 18185 18183 18184

Reinforced 18191 18192 18195 18193 18194

*Med+Distal+ features a larger distal end to accommodate sockets. Proximal circumference measured 15” from distal end. Distal circumference measured 1.5” from distal end.

c. Durasleeve™

The Durasleeve™ air-tight hypobaric suction environment is constructed of the highest quality neoprene

and meets the needs of exceptionally active patients. This sleeve features contouring at the back of knee to

reduce bunching and increase comfort. Preflexed knee design is naturally shaped with no seams for reduced

pressure on the patella. Inside, the neoprene lining is glued for uncompromised air-tight integrity. Regular

is approximately 1/8” thick. The more durable Heavy-Duty is approximately 3/16”. The easy-to-apply EZ style

is designed for patients with limited dexterity or with functional levels K1 and K2. Sold each. From Syncor,

the makers of the Original TES Belt™.

Size 00 0 1 2 3 4 5

Circ* 8-10” 10-12” 12-14” 14-16” 16-18” 18-21” 21-25”


Size Regular Heavy-Duty EZ

00 DUR-XX0 N/A N/A

0 DUR-000 DUR-HD-0 DUR-EZ-0








PR

OS

TH

ET

ICS

d. Neoprene Suspension Cuff

15” beige neoprene sleeve, 1/8” thick, unlined inside for friction coupling with prosthetic socket. Glued and

sewn anterior seam, contoured around patellar area. Snug posterior dimensions for faithful adherence to

the socket. Sold each. From Truform.

Size 00 0 1 1.5 2 2.5 3 4 5

15” 0819-00 0819-0 0819-1 0819-15 0819-2 0819-25 0819-3 0819-4 0819-5

16” 0818-00 0818-0 0818-1 0818-15 0818-2 0818-25 0818-3 0818-4 0818-5

e. Alpha® Flex Sleeve

Featuring a highly flexible fabric for greater comfort, flexibility and increased range of motion, the Alpha

Flex Sleeve may be used with locking suspension, suction suspension, or with LimbLogic™ VS for creating an

airtight seal. The Alpha Flex uses a unique blend of Kevlar pulp and traditional Alpha gel with mineral oil.

This blend provides increased sleeve durability as well as greater puncture and abrasion resistance without

compromising comfort. For even more durability, the Alpha Flex Sleeve features a contoured polyurethane

pad on the interior fabric cuff. This pad, which covers the typical socket brim, helps reduce damage to the

seal due to impacts in the brim area. 3mm gel thickness. Sold each. From WillowWood.

Size 2 3 4 5 6 7 8

Thigh* 8.8-12.3” 9.5-13.4” 13-18” 14-20” 16-22” 17.7-25” 19-26”

Patella 7.8-11” 9-13” 11-15.4” 12.6-17.5” 14-19.3” 15.5-21.7” 17-23.6”

Buff ALS-52B ALS53B ALS-54B ALS-55B ALS-56B ALS-57B ALS-58B

Black ALS-52BK ALS53BK ALS-54BK ALS-55BK ALS-56BK ALS-57BK ALS-58BK

*Measured 6” above patella

f. Alpha® Original Suction Seal

Fully lined with Alpha® gel. Features an interior fabric cuff to protect gel from damage. Sold each. From

WillowWood.


Circumference* 10-13” 13-16” 16-19” 19-24”

Buff ALS-33B ALS-30B ALS-36B ALS-37B

Medium Brown ALS-33M ALS-30M ALS-36M ALS-37M


g. Alpha® Spirit Suction Seal

Durable unbroken loop Spirit fabric fully lined with Alpha® gel. Features an interior fabric cuff to protect gel

from damage. Sold each. From WillowWood.

Size 2 3 4 5 6 7 8

Circumference* 8.8-12.3” 9.5-13.4” 13-18” 14-20” 16-22” 17.7-25” 19-26”

Buff ALS-42B ALS-43B ALS-44B ALS-45B ALS-46B ALS-47B ALS-48B

Medium Brown ALS-42M ALS-43M ALS-44M ALS-45M ALS-46M ALS-47M ALS-48M




PR

OS

TH

ET

ICS


a. Alpha® AK Sleeve

Designed specifically for transfemoral amputees, the Alpha AK Sleeve may be used with suction suspension

as well as with LimbLogic™ VS for creating an airtight seal. The sleeve features the same flexible fabric as

the Alpha Flex sleeve. The Alpha AK Sleeve also uses a unique blend of Kevlar pulp and traditional Alpha gel

with mineral oil for increased sleeve durability and greater puncture and abrasion resistance. Black. Available

in four sizes. From WillowWood.


Proximal Circumference1 30-43cm 33-51cm 41-56cm 46-69cm

Distal Circumference2 20-36cm 25-43cm 33-48cm 43-61cm

Item No. ð ALS-63K ALS-60K ALS-66K ALS-67K

1Measured 5cm from Ischial Tuberosity. 2Measured 15cm from the proximal measurement.

b. Knit-Rite Prosthetic Knee Sleeve Saver

Premature failure of BK (below the knee) prosthetic suspension sleeves in the area of the prosthetic socket

brim is a common problem for amputees. The Sleeve Saver sleeve protector product from Knit-Rite increases

longevity for prosthetic suspension sleeves. The product is a simple double layer nylon sleeve that is worn

between the socket and the suspension sleeve. When the Sleeve Saver is used, the inner surface of the sus-

pension sleeve is protected from abrasive rubbing of the socket brim, because the two nylon layers of the

Sleeve Saver help absorb friction Sold each. From Knit-Rite.

Description Narrow Regular

Knee Circumference 10-12” 14-16”

Item No. ð 3MSPB0NA 3MSPB010

c. KISS® WrapStrap-R®

Residue-free, removable linkage prevents doffing inversion and donning dislodging. Stops under sleeve air

leakage. Strong, reliable construction. Low profile, fully adjustable, tapeless and removable. Sold individu-

ally or pack of 10. From KISS®.

Description Each 10/Pkg

Beige CMP24/A CMP24/B

Gray CMP24/C CMP24/D



PR

OS

TH

ET

ICS

LINERS

d. AK Extreme Liner

ALPS has engineered their new AK Extreme Liner with 80% less vertical stretch than their regular EasyLiner™,

reducing the movement of redundant tissue and allowing for more control and stability. Ideal for AK and

high activity BK amputees. 3mm and 6mm uniform. Locking or cushion. Sold each. From ALPS.


3mm Locking AKDT16-3 AKDT20-3 AKDT24-3 AKDT26-3 AKDT28-3 AKDT32-3 AKDT38-3 AKDT44-3

6mm Locking AKDT16-6 AKDT20-6 AKDT24-6 AKDT26-6 AKDT28-6 AKDT32-6 AKDT38-6 AKDT44-6

3mm Cusion AKFR16-3 AKFR20-3 AKFR24-3 AKFR26-3 AKFR28-3 AKFR32-3 AKFR38-3 AKFR44-3

6mm Cusion AKFR16-6 AKFR20-6 AKFR24-6 AKFR26-6 AKFR28-6 AKFR32-6 AKFR38-6 AKFR44-6

*Circumference measured 6cm from distal end.

e. EZ Flex Liner

ALPS™ EZ Flex Liner allows users ease of knee flexion through an unlimited restriction of stretch anteriorly.

Posteriorly the fabric has 80% less vertical stretch which reduces the bunching in the popliteal region. The

ALPS™ EasyGel contains antioxidants that help promote skin health, which also provides comfort and dura-

bility. 3mm or 6mm thickness. Sold each. From ALPS.


3mm Locking EZF16-3 EZF20-3 EZF24-3 EZF26-3 EZF28-3 EZF32-3 EZF38-3 EZF44-3

6mm Locking EZF16-6 EZF20-6 EZF24-6 EZF26-6 EZF28-6 EZF32-6 EZF38-6 EZF44-6


f. EasyLiner™ Fabric Reinforced

The EasyLiner™ features the EasyGel™ to relieve the skin of any shear forces, the high performance fabric

for durability and reinforced seams. A soft 12mm distal pad protects bony prominences at the distal end.

EasyLiner is available in 3mm uniform, 6mm uniform and 6mm to 3mm tapered. Available in locking and

cushion. Sold each. From ALPS.

Locking Locking Locking Cushion Cushion Cushion Circumf* 3mm 6mm 6-3mm 3mm 6mm 6-3mm

16-19cm ELDT16-3 ELDT16-6 ELDT16-6/3 ELFR16-3 ELFR16-6 ELFR-16-6/3









g. EasyLiner™ Super Stretch

All the features of the EasyLiner™, but without the fabric cover to restrict the EasyGel™ from moving with

the user. 6mm, cushion. Sold each. From ALPS.

Circumference* 10-15cm 16-19cm 20-23cm 24-25cm 26-27 28-31cm 32-37cm

Item No. ð ELPX-10 ELPX-16 ELPX-20 ELPX-24 ELPX-26 ELPX-28 ELPX-32




PR

OS

TH

ET

ICS

LINERS — Continued

a. ClearGen Silicone Liner

Sold each. From ALPS.

Circumf* 14-15cm 16-17cm 18-19cm 20-21cm 22-23cm 24-25cm 26-27cm

1.5mm GL-14-1.5 GL-16-1.5 GL-18-1.5 GL-20-1.5 GL-22-1.5 GL-24-1.5 GL-26-1.5

3mm GL-14-3.0 GL-16-3.0 GL-18-3.0 GL-20-3.0 GL-22-3.0 GL-24-3.0 GL-26-3.0

Circumf* 28-29cm 30-31cm 32-33cm 34-37cm 38-43cm 44-51cm

1.5mm GL-28-1.5 GL-30-1.5 GL-32-1.5 GL-34-1.5 GL-38-1.5 GL-44-1.5

3mm GL-28-3.0 GL-30-3.0 GL-32-3.0 GL-34-3.0 GL-38-3.0 GL-44-3.0


b. Clearpro™ Transparent Silicone Suction Socket

Provides excellent adhesion to maintain suspension as well as high tear strength to maximize durability. Al-

lows freedom of movement with the added comfort of as little as 1.5mm of material behind the knee. Built-in

distal umbrella accepts all types of pin mechanism locking devices. Sold each. From ALPS.

Circumf* 14-15cm 16-17cm 18-19cm 20-21cm 22-23cm 24-25cm 26-27cm

1.5mm SSA14-1.5 SSA16-1.5 SSA18-1.5 SSA20-1.5 SSA22-1.5 SSA24-1.5 SSA26-1.5

3mm SSA14-3.0 SSA16-3.0 SSA18-3.0 SSA20-3.0 SSA22-3.0 SSA24-3.0 SSA26-3.0

Circumf* 28-29cm 30-31cm 32-33cm 34-37cm 38-43cm 44-51cm

1.5mm SSA28-1.5 SSA30-1.5 SSA32-1.5 SSA34-1.5 SSA38-1.5 SSA44-1.5

3mm SSA28-3.0 SSA30-3.0 SSA32-3.0 SSA34-3.0 SSA38-3.0 SSA44-3.0


c. General Purpose Liner

This economically priced liner features the ALPS EasyGel™ to relieve skin of shear forces, high performance

Fabric for durability and a distal end encapsulation which retrofits most other liners. 12 month warranty on

purchase of one liner; 24 month warranty on purchase of two. Available in locking and cushion; 6mm and

3mm uniform. Sold each. From ALPS.

Circumference* 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-35cm 38-44cm

3mm Locking GPDT16-3 GPDT20-3 GPDT24-3 GPDT26-3 GPDT28-3 GPDT32-3 GPDT38-3

6mm Locking GPDT16-6 GPDT20-6 GPDT24-6 GPDT26-6 GPDT28-6 GPDT32-6 GPDT38-6

3mm Cushion GPFR16-3 GPFR20-3 GPFR24-3 GPFR26-3 GPFR28-3 GPFR32-3 GPFR38-3

6mm Cushion GPFR16-6 GPFR20-6 GPFR24-6 GPFR26-6 GPFR28-6 GPFR32-6 GPFR38-6

*Circumference measured 6cm from distal end. Also available in size 44 (43-50cm)

d. Liberty Liner II

ALPS™ Liberty Liner II allows the expulsion of sweat and air through a built-in valve either through the pin

or reducer. The one-way evacuation valve has been strategically placed distally to evacuate any air between

the user’s skin and the liner. The liner no longer has to work the air out; it expels itself. The liner comes with

one fabric sheath that controls moisture. 6mm gel thickness. Sold each. From ALPS.

Circumf* 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-35cm 36-43cm 44-53cm

Locking VSDT16-3 VSDT20-3 VSDT24-3 VSDT26-3 VSDT28-3 VSDT32-3 VSDT38-3 VSDT44-3

Cushion VSFR16-6 VSFR20-6 VSFR24-6 VSFR26-6 VSFR28-6 VSFR32-6 VSFR38-6 VSFR44-6

LDP-764 Liberty Liner II Pin




PR

OS

TH

ET

ICS

e. Proximal Seal Interface Liner

The PSI cushion liner offers the user more freedom of movement by sealing on the liner just proximal to the

trim lines of a BK socket instead of sealing proximal to the liner on the skin. ALPS EasyGel™ provides additional

comfort and durability. Integrated fabric cover allows air to wick out. Sold each. From ALPS.

Circumf* 10-15cm 16-19cm 20-23cm 24-25cm 26-27cm 28-31cm 32-35cm 36-43cm 44-53cm

3mm PSI10-3 PSI16-3 PSI20-3 PSI24-3 PSI26-3 PSI28-3 PSI32-3 PSI38-3 PSI44-3

6mm PSI10-6 PSI16-6 PSI20-6 PSI24-6 PSI26-6 PSI28-6 PSI32-6 PSI38-6 PSI44-6


f. Thermoliner®

The Thermoliner™ is a gel interface which can be customized and shaped to the configuration of the user.

Simply apply the liner to a positive cast and place in a 194°F oven for 30 minutes. 3mm or 6mm thickness.

Available in locking and cushion. Sold each. From ALPS.


3mm Locking TFDT16-3 TFDT20-3 TFDT24-3 TFDT26-3 TFDT28-3 TFDT32-3 TFDT38-3 TFDT44-3

6mm Locking TFDT16-6 TFDT20-6 TFDT24-6 TFDT26-6 TFDT28-6 TFDT32-6 TFDT38-6 TFDT44-6

3mm Cushion TFFR16-3 TFFR20-3 TFFR24-3 TFFR26-3 TFFR28-3 TFFR32-3 TFFR38-3 TFFR44-3

6mm Cushion TFFR16-6 TFFR20-6 TFFR24-6 TFFR26-6 TFFR28-6 TFFR32-6 TFFR38-6 TFFR44-6


g. ComforGel™ Liner

The ComforGel™ Liner sandwiches a specially formulated gel between inner and outer layers of cotton fabric.

The stretch fabric allows for the liner to conform to virtually any shape and provide exceptional comfort,

while the nylon reinforced distal end ensures greater durability. Available in three and five ply thicknesses

and a variety of sizes to accommodate practically any amputee. Sold each. From Comfort Products.

Ply Sock Flat Max 9” Gel 12” Gel 9” Gel 12” Gel Style Length Width Circumf w/Hole w/Hole

Arm 3 12” 2-1/4” 10” CGELYA CGELYAFD CGELYA3 CGELYFD3

3 14” 2-1/4” 10” CGELYA14 CGELYA14/12 CGELYA143 CGELYA14/123

5 12” 2-1/4” 10” CGELGA CGELGAFD CGELGA3 CGELGFD3

5 14” 2-1/4” 10” CGELGA14 CGELGA14/12 CGELGA143 CGELGA14/123

AK 3 12” 5-1/4” 26” CGELAY CGELAYFD CGELAY3 CGELAYFD3

3 14” 5-1/4” 26” CGELAY14 CGELAY14/12 CGELAY143 CGELAY14/123

5 12” 5-1/4” 26” CGELAG CGELAGFD CGELAG3 CGELAGFD3

5 14” 5-1/4” 26” CGELAG14 CGELAG14/12 CGELAG143 CGELAG14/123

BK 3 12” 3.5” 20” CGELY CGELYFD CGELY3 CGELYFD3

3 14” 3.5” 20” CGELY14 CGELY14/12 CGELY143 CGELY14/123

3 16” 3.5” 20” CGELY16 CGELY16/12 CGELY163 CGELY16/123

5 12” 3.5” 20” CGELG CGELGFD CGELG3 CGELGFD3

5 14” 3.5” 20” CGELG14 CGELG14/12 CGELG143 CGELG14/123

5 16” 3.5” 20” CGELG16 CGELG16/12 CGELG163 CGELG16/123



PR

OS

TH

ET

ICS


a. Aegis Ultimate Liner

A 6mm soft silicone gel liner with fabric cover available in locking or cushion styles. Sold each. From ESP.

Length** 4” 6” 8” 4” 6” 8” Circumf* Locking Locking Locking Cushion Cushion Cushion

14-20cm BK-U-XS-4L BK-U-XS-6L BK-U-XS-8L BK-U-XS-4C BK-U-XS-6C BK-U-XS-8C

20-26cm BK-U-S-4L BK-U-S-6L BK-U-S-8L BK-U-S-4C BK-U-S-6C BK-U-S-8C

26-32cm BK-U-M-4L BK-U-M-6L BK-U-M-8L BK-U-M-4C BK-U-M-6C BK-U-M-8C

32-38cm BK-U-L-4L BK-U-L-6L BK-U-L-8L BK-U-L-4C BK-U-L-6C BK-U-L-8C

38-42cm BK-U-XL-4L BK-U-XL-6L BK-U-XL-8L BK-U-XL-4C BK-U-XL-6C BK-U-XL-8C

*Circumference measured 2” from distal end. **Length measured from mid-patellar tendon to distal end.

b. Aegis Seal-Pro Transtibial (TT) Liner

A soft and durable silicone liner with 6mm thickness where fabric covered (4mm where not covered). It

features a customized outer fabric and is available in locking and cushion styles. Standard fabric in locking

version. Sold each. From ESP.

Length** 4” 6” 8” 4” 6” 8” 4” 6” 8” Style No Fabric No Fabric No Fabric Custom Custom Custom Locking Locking Locking Circumf* Fabric Fabric Fabric

14-20cm SP-XS-4 SP-XS-6 SP-XS-8 SP-XS-4F SP-XS-6F SP-XS-8F SP-XS-4L SP-XS-6L SP-XS-8L

20-26cm SP-S-4 SP-S-6 SP-S-8 SP-S-4F SP-S-6F SP-S-8F SP-S-4L SP-S-6L SP-S-8L

26-32cm SP-M-4 SP-M-6 SP-M-8 SP-M-4F SP-M-6F SP-M-8F SP-M-4L SP-M-6L SP-M-8L

32-38cm SP-L-4 SP-L-6 SP-L-8 SP-L-4F SP-L-6F SP-L-8F SP-L-4L SP-L-6L SP-L-8L

38-42cm SP-XL-4 SP-XL-6 SP-XL-8 SP-XL-4F SP-XL-6F SP-XL-8F SP-XL-4L SP-XL-6L SP-XL-8L


c. Aegis Seal-Pro Transfemoral (TF) Liner

A soft and durable silicone liner with 6mm thickness where fabric covered (4mm where not covered). It

features a customized outer fabric and is available in locking and cushion styles. Standard fabric in locking

version. Sold each. From ESP.

Size 30cm 34cm 38cm 42cm 46cm


No Fabric SP-TF-30 SP-TF-34 SP-TF-38 SP-TF-42 SP-TF-46

Custom Fabric SP-TF-30F SP-TF-34F SP-TF-38F SP-TF-42F SP-TF-46F

Locking Liner SP-TF-30L SP-TF-34L SP-TF-38L SP-TF-42L SP-TF-46L

*Circumference measured 2” from distal end.

d. Aegis TF Liner

The Aegis TF Liner is a 3mm soft silicone gel liner with fabric cover. It is available in locking or cushion styles.

Sold each. From ESP.



Locking TF-30-L TF-34-L TF-38-L TF-42-L TF-46-L

Cushion TF-30-C TF-34-C TF-38-C TF-42-C TF-46-C

*Circumference measured 2” from distal end.



PR

OS

TH

ET

ICS

e. Aegis SoFlex and Streamline Liner

The Aegis Soflex Liner is a covered durable soft silicone liner. It is preflexed at 43° and available in locking and

cushion styles. The Aegis Streamline Clear Liner is clear 2mm silicone liner with no fabric cover. It is available

in locking and cushion styles. The Aegis Streamline Covered Liner has a thickness of 3mm and comes with

fabric cover and is available in locking and cushion styles. Sold each. From ESP.

Circ* Length** SoFlex SoFlex Streamline Streamline Streamline Streamline Locking Cushion Locking Cushion Locking Cushion Clear Clear w/Cover w/Cover

17-19cm 4” SBK14-4L SBK14-4C BK-14-4S BK-14-4G BK-14-4S-C BK-14-4G-C

6” SBK14-6L SBK14-6C BK-14-6S BK-14-6G BK-14-6S-C BK-14-6G-C

































SoFlex

Streamline



PR

OS

TH

ET

ICS


a. First-Class Liner, 3mm

3mm silicone liner with 10cm internal matrix. Comfort-sil-gel provides high wearing comfort. Fine single-jersey

fabric cover offers very smooth sliding characteristics with minimized elasticity in length, yet retains circular

elasticity. Locking or cushion styles. 6 month warranty. Sold each. From Euro International.

Size 16 18 20 21 22 23.5 25 26.5 28 30 32 34 36 38 40 42 45

Code 16 18 20 21 22 23.5 25 26.5 28 30 32 34 36 38 40 42 45

Locking 1S5/ (Size)

Cushion 1S7/ (Size)


b. ContexGel-Liner

Features Streifendeder Polymer Gel-SPG for added skin care. Thermoformable at 65°C. Fine single-jersey fabric

cover offers very smooth sliding characteristics with minimized elasticity in length, yet retains circular elastic-

ity. Locking or cushion styles in three wall thicknesses. 6 month warranty. Sold each. From Euro International.

Size Small Medium Large X-Large XX-Large

Distal Circumference 16-23cm 18-30cm 24-38cm 28-41cm 32-54cm

Proximal Circumference 25-36cm 24-41cm 38-62cm 41-65cm 43-73cm

3mm Locking 2S10/3S 2S10/3M 2S10/3L 2S10/3XL 2S10/3XXL



3mm Cushion 2S11/3S 2S11/3M 2S11/3L 2S11/3XL 2S11/3XXL




c. medi Liner RELAX 3C/6C Locking

The Relax liner functions as a high quality silicone transtibial liner, with the added benefit of an Umbrellan

cover for protection of the limb from environmental triggers such as electromagnetic influences. Available

in 3mm and 6mm thicknesses. Also available in cushion style. Sold each. From Medi USA.

Size 18cm 20cm 22cm 23.5cm 25cm 26.5cm

3mm M892118 M892120 M892122 M892123 M892125 M892126

6mm M892218 M892220 M892222 M892223 M892225 M892226

Size 28cm 30cm 32cm 36cm 40cm 45cm

3mm M892128 M892130 M892132 M892136 M892140 M892145

6mm M892228 M892230 M892232 M892236 M892240 M892245

d. medi Liner RELAX TFS/TFC

The Relax TFS and Relax TFC (conical profile) liner is designed for the transfemoral amputee with phantom

pain and the need for simple and easy application. Easy to roll up the limb without the use of lubricants.

Absence of textile cover allows for amazing radial stretch, which reduces proximal irritation and accom-

modates fleshy limbs. Full-length matrix virtually eliminates longitudinal stretch associated with pistoning.

2mm thickness provides necessary comfort without adding excessive bulk and weight. Standard or conical

profiles. Sold each. From Medi USA.


Standard M895227 M895231 M895235 M895239 M895243 M895247 M895252


Conical M895424 M895427 M895431 M895435 M895439



PR

OS

TH

ET

ICS

e. medi Liner SENSITIVE 3C/6C Locking

The Sensitive Liner is designed for the transtibial amputee with standard or conical shaped limbs. Soft sili-

cone gel provides the ultimate in comfort and durability. Available in 3mm and 6mm thicknesses. Sold each.

From Medi USA.


3mm M893118 M893120 M893122 M893123 M893125 M893126

6mm M893218 M893220 M893222 M893223 M893225 M893226


3mm M893128 M893130 M893132 M893136 M893140 M893145

6mm M893228 M893230 M893232 M893236 M893240 M893245

f. medi Liner PROTECT 3C Locking

The Protect Care transtibial liner is specially formulated with skin care properties for amputees with dry or

sensitive skin. 3mm thickness. Also available in cushion style. Sold each. From Medi USA.


Item No. ð MC99118 MC99120 MC99122 MC99123 MC99125 MC99126


Item No. ð MC99128 MC99130 MC99132 MC99136 MC99140 MC99145

g. medi Liner AKOS TFS/TFC

The AKOS TF and Relax TFC (conical profile) liners provide all the unique properties of the Relax TF/TFC

without phantom pain applications. Translucent material allows areas of pressure to be visible during check

socket fittings. Gliding surface eases donning for those with diminished hand strength. Excellent radial stretch

properties. Standard or conical profiles. Sold each. From Medi USA.


Standard M895127 M895131 M895135 M895139 M895143 M895147 M895152


Conical M895324 M895327 M895331 M895335 M895339

h. Keasy® Cone

A unique foam cone used to create a seamless liner between the residual limb and socket (soft liner) or

between a gel liner and socket (hard liner). Keasy® cones are thermoformable and easily modified in five

minutes, creating a smooth, glueless finish that helps avoid possible allergic reactions. The liner can be re-

worked to accommodate for patient changes four to five times without affecting structural characteristics.

Closed cell structure allows for easy cleaning, effective hygiene and durability. From Nabtesco Proteor-USA.

Description Length Proximal Profile Distal Item No.ò Diamter Thickness

Transfemoral 500mm 210mm 6.5mm 10mm 1S400-210

Transtibial, Short and Medium 400mm 160mm 6.5mm 10mm 1S400-160

Transtibial, Long 500mm 180mm 6.5mm 12mm 1S400-180

Transtibial, Small 305mm 110mm 5mm 8mm 1S402-110

Transtibial, Long and Thin 500mm 130mm 6.5mm 10mm 1S400-130



PR

OS

TH

ET

ICS


a. ComfortZone™ Liners™

ComfortZone™ Gel Liners offer a high level of comfort, durability and protection from abrasion. Three

styles—Single Socket (3 ply) with 3mm of gel against skin and CoolMax® exterior material; Double Socket (5

ply) with 3mm of gel between two layers of CoolMax®; and Ultra Cushion (3 and 5 ply) with 3mm or 5mm of

gel between two layers of cotton material and nylon reinforced toe. White. Sold each. From Silipos.

Single/Double Socket Gel Liner

Size Short/Narrow Short/Regular Medium/Regular

Liner Length 12” (30.5cm) 12” (30.5cm) 16” (40.5cm)

Gel Length 10” (25cm) 10” (25cm) 12” 30.5cm)

Proximal Circumference 15-18” (38-45cm) 15-18” (38-45cm) 15-18” (38-45cm)

Distal Circumference 9-12” (23-30.5cm) 12-14” (30.5-35.5cm) 12-14” (30.5-35.5cm)

Single Socket (3 Ply) 12725 12755 12765

Double Socket (5 Ply) 12625 12655 12665

Ultra Cushion Gel Liner

Size Short/Regular Medium/Regular Medium/Wide

Liner Length 12.5” (32cm) 13.5” (34cm) 14.5” (37cm)

Gel Length 10” (25cm) 12” (30.5cm) 12” (30.5cm)

Proximal Circumference 8-13” (20-33cm) 10-15” (25-38cm) 12-17” (30.5-43cm)

Distal Circumference 7-11” (18-28cm) 18-14” (20-35.5cm) 10-16” (25-40.5cm)

3 Ply 12555 12565 12575

5 Ply 12515 12525 12535

b. SiloLiner™

Easy to don and doff, SiloLiner™ is a skin-friendly, easy to use solution for geriatric and post-op patients. Re-

inforced cuffs prevent liner from rolling down and irritating skin. Silipos’ softest gel available helps moisturize

and condition skin grafts and scars. Ideal for long-term care and transfer patients. Outer material provides

wide range of motion. 6mm gel thickness. From Silipos.

Pin Liner

Flat Width 3” (7.6cm) 4” (10.2cm) 5” (12.7cm) 6” (15.2cm)

Proximal Circumference 8-14” 9.5-16” 12-20” 14-26” MPT (20-35.5cm) (24-40.5cm) (30.5-51cm) (35.5-66cm)

Distal Circumference 8-12” 9.5-13.5” 12-15” 14-16” at urethane attachment (20-30.5cm) (24-34cm) (30.5-38cm) (35.5-40.5cm)

1/Pkg 12” Length ð 1460-EA 1461-EA 1462-EA 1463-EA

1/PKg 14” Length ð 1464-EA 1465-EA 1466-EA 1467-EA

2/Pkg 12” Length ð DISCON DISCON DISCON DISCON


Cushion Liner

Flat Width 3” (7.6cm) 4” (10.2cm) 5” (12.7cm) 6” (15.2cm)

Proximal Circumference 8-14” 9.5-16” 12-20” 14-26” MPT (20-35.5cm) (24-40.5cm) (30.5-51cm) (35.5-66cm)

Distal Circumference 8-14” 9.5-16” 12-17” 14-19” measured 2” from distal end (20-35.5cm) (20-40.5cm) (30.5-43cm) (35.5-48cm)







PR

OS

TH

ET

ICS

c. DuraGel™ Liner

DuraGel™ Liners for activity levels K1-K3 feature a denser durometer gel for added gel life and are available

in both pin and cushion styles. Nylon composite fabric provides abrasion resistance and gel bond. Mineral

oil gel formula providing comfort and skin protection will not tear or thin out with stress. Now available in

9mm. Retrofits to Explorer and Alpha® sockets. Sold each. From Silipos.

Size Medium Medium+ Large Large+ X-Large

Proximal Circumference 9-15” 13-20” 15-21” 16-26” 16-29” measured 15” from distal end (23-38cm) (33-51cm) (38-53cm) (41-66cm) (41-74cm)

Distal Circumference 8-13” 9-13” 9-16” 12-17” 12-21” measured 1.5” from distal end (20-33cm) (23-33cm) (23-41cm) (30-43cm) (30-53cm)

Size Med Med+ Large Large+ X-Large Med Med+ Large Uniform Uniform Uniform Uniform Uniform Tapered Tapered Tapered

Pin Liner, 3mm 18211 18212 18213 18214 18215 18216 18217 N/A

Pin Liner, 6mm 18201 18202 18203 18204 18205-SI 18206-SI 18207 18208

Pin Liner, 9mm 18221 18222 18223 18224 N/A N/A N/A N/A

Cushion, 3mm 18251 18252 18253 18254 18255 18256 18257 N/A

Cushion, 6mm 18241 18242 18243 18244 18245 18246 18247 18248

Cushion, 9mm 18261 18262 18263 18264 N/A N/A N/A N/A

d. Low Activity Liner

With a softer durometer gel to accommodate the diabetic patient, the Low Activity Liner provides skin con-

ditioning and comfort for low to moderate activity level patients. Features include a stabilizing matrix for

reduced distal elongation and gel thicknesses of 3, 6 and 9mm. Sold each. From Silipos.

Size Medium Medium+ Large Large+ X-Large

Proximal Circumference* 9-16” 13-21” 15-22” 16-27” 16-30” (23-41cm) (33-53cm) (38-56cm) (41-68cm) (41-76cm)

Distal Circumference** 8-12” 9-12” 9-15” 12-16” 12-20” (20-30cm) (23-30cm) (23-38cm) (30-41cm) (30-51cm)

Size Med Med+ Large Large+ X-Large Med Med+ Gel Uniform Uniform Uniform Uniform Uniform Tapered Tapered

Pin Liner 3mm 18101 18107 18113 18116 18119 18102 18108

6mm 18103 18109 18114 18117 18120 18104 18110

9mm 18105 18111 18115 18118 N/A 18106 18112

Cushion Liner 3mm 18141 18147 18153 18156 18159 18142 18148

6mm 18143 18149 18154 18157 18160 18144 18150

9mm 18145 18151 18155 18158 N/A 18146 18152

*Proximal circumference measured 15” from distal end. **Distal circumference measured 1.5” from distal end.



PR

OS

TH

ET

ICS


a. Alpha® Classic Locking Liner

Alpha Classic Liners are available in three distinctly different fabrics and three gel thicknesses, as well as vari-

ous sizes to adapt to the amputee’s limb circumference. Additionally, medium, medium-plus and large sizes

are available in three distinct gel profiles to accommodate various limb shapes with additional comfort. Alpha

Classic Liners are composed of skin-friendly Alpha Classic Gel and are heat moldable, allowing prosthetists

to easily stretch the liners within their facilities.

The durable Original fabric helps extend the life of the liner. Alpha Spirit fabric may be used with Velcro®-

type material and is more flexible than other Classic fabrics. The extra flexibility allows for easier donning

and doffing and easier flexing at the knee. The MAX fabric provides an outer cover for the liner that is more

abrasion resistant than other liners on the market today. The one-way stretch Select fabric controls pistoning

while remaining easy to don. Sold each. From WillowWood.

Size Guide Small Medium Medium Med+ Med+ Large Large+ X-Large w/Sm Umb* w/Sm Umb*

Prox. Circ1 20-27cm 23-36cm 23-36cm 33-50cm 33-50cm 36-55cm 40-60cm 43-65cm

Distal Circ2 15-22cm 18-26cm 18-26cm 20-28cm 20-28cm 25-33cm 28-40cm 33-45cm

1Measured 30cm from distal end. 2Measured 4cm from distal end. *Liner with Small Umbrella is a non-stock item with 3-day lead time.

Complete the item number below by choosing from options beneath t. (Example: ALC-5196-E)

Item No. ð (Code)-(Style) (Fabric) (Thickness) (Size)-Qty

Code t Style t Fabric t Thick t Size t Single Liner t

Locking ALL Uniform 5 Original Grn/Gray 0 3mm 3 Small 3 Original, Spirit E Cushion ALC Tapered1 7 Original Buff 1 6mm 6 Medium 0 Max X Contoured1 9 Original Md Brn 2 9mm 9 Med w/SMU2 1 Spirit Green/Gray 3 Medium+ 4 Spirit Buff 4 MD+ w/SMU2 5 Spirit Med Brown 5 Large 6 MAX Brown 8 Large+ 8 X-Large 7

1Offered in Medium, Medium Plus and Large sizes only. 2Liner with Small Umbrella is a non-stock item with 3-day lead time.

b. Alpha® Silicone Liner

The Alpha® Silicone Liner uses a proprietary, platinum-cured, medical grade silicone designed for comfort and

performance. Our unique blend of silicone, Vitamin E, and skin conditioners results in a pleasing surface that

is non-greasy, non-tacky, and comfortable against the skin. The Alpha Silicone Liner uses Select fabric that

controls pistoning without using a distal matrix. The Select fabric allows for circumferential stretch making it

easy to don for numerous limb shapes. The flexible knee panel provides enhanced knee flexion and a broad

range of knee motion. The Alpha Silicone Liner may be retrofit with Alpha Hybrid Liners with a progressive

profile. Sold each. From WillowWood.

Note: Accordion distal umbrella sizes change with each size liner. Size Medium Plus 3 is available upon request.

It is designed to retrofit patients that are near the upper limit of the Medium Plus size range.

9mm distal, 6mm anterior, 2.5mm proximal and posterior for knee flexion

Size Medium 1 Medium 2 Med Plus 1 Med Plus 2 Large 1 Large 2

Prox. Circ1 26-44cm 29-44cm 30-54cm 33-54cm 33-64cm 36-64cm

Distal Circ2 20-24cm 24-29cm 20-24cm 24-29cm 28-32cm 32-36cm

Locking S352-6590-1 S352-6590-2 S352-6594-1 S352-6594-2 S352-6596-1 S352-6596-2

Cushion S350-6590-1 S350-6590-2 S350-6594-1 S350-6594-2 S350-6596-1 S350-6596-2

1Measured 30cm from distal end. 2Measured 4cm from distal end.

Original Green/Gray

Max Fabric



PR

OS

TH

ET

ICS

c. Alpha® Hybrid Liner

The Alpha Hybrid Liner allows for easy bending and flexing of the knee, controlled pistoning, and easy

donning. It’s Hybrid Gel is perfectly paired with a one-way stretch fabric that effectively controls pistoning

without incorporating a distal matrix. This fabric, engineered exclusively for WillowWood, allows circum-

ferential stretch, yet maintains liner elongation within specified limits. A flexible panel incorporates an

abrasion-resistant fabric allowing the limb to easily flex without pulling and tightening at the knee. This

panel and the thin gel behind the knee allows for comfort while sitting or bending for extended periods of

time. A new socket should be fabricated for best use of the Alpha Hybrid Liner with progressive gel style.

The Alpha Hybrid Liner with uniform gel style is a solution for amputees currently wearing a 6 mm uniform

Alpha Classic Liner with Original fabric and who want to experience the benefits of this new liner. Light Gray/

Gray color. Sold each. From WillowWood.

Progressive Gel

9mm distal, 6mm anterior, 2.5mm proximal and posterior for knee flexion

Size Small Medium Medium Plus Large Large Plus Extra Large



Locking H352-6393 H352-6390 H352-6394 H352-6396 H352-6398 H352-6397

Cushion H350-6393 H350-6390 H350-6394 H350-6396 H350-6398 H350-6397

Uniform Gel

6mm distal/anterior, 3mm posterior for knee flexion

Size Small Medium Medium Plus Large Large Plus Extra Large



Locking H351-6393 H351-6390 H351-6394 H351-6396 H351-6398 H351-6397

Cushion H350-5363 H350-5360 H350-5364 H350-5366 H350-5368 H350-5367


d. Alpha® Classic AK Liner

Classic AK Liners with the AK Profile accommodate the often sensitive areas of transfemoral residual limbs

with a specific gel style and the incorporation of skin-friendly, mineral-oil-based classic Alpha Classic Gel. The

liner, offered in cushion and locking, has 9 mm of gel distally, tapering to 3 mm proximally—with a built-in

gel pad to protect the often-sensitive femur. This extra gel pad provides a total of 9 mm of gel at the distal

lateral aspect of each liner. The Alpha Spirit Fabric used for Alpha Classic AK Cushion Liners is unique in its

ability to flex during donning or doffing. Alpha Classic AK Cushion Liners may be used with a Velcro®-like

material for added security and are heat moldable for easy stretching. Buff color. Sold each. From WillowWood.

Size Medium Plus Large Large Plus Extra Large

Prox. Circ1 30-54cm 33-64cm 41-80cm 46-90cm

Distal Circ2 20-32cm 25-36cm 32-47cm 37-55cm


Style Locking Locking Cushion Cushion

Fabric Spirit MAX Spirit MAX

M+ N/A AKL-2634-X AKC-2634-E AKC-2834-X

M+ w/Small Umbrella* N/A AKL-2835-X N/A N/A

L N/A AKL-2636-X AKC-2636-E AKC-2836-X

L+ N/A AKL-2638-X AKC-2638-E AKC-2838-X

XL N/A AKL-2637-X AKC-2837-E AKC-2837-X

XL w/Extra Large Umbrella* N/A AKL-2837-X N/A N/A

*Non-stock item with 3-day lead time.



PR

OS

TH

ET

ICS


a. Alpha® Hybrid AK Liner

The Alpha Classic AK Liner with Symmetrical Profile has 9 mm gel distally and tapers to 2.5 mm gel at the

anterior and posterior. The symmetrical design allows the liner to be rotated for extended wear. This profile

is a good choice for amputees who reflect liners for greater comfort at the socket brim line. The Select Fabric,

only offered with the Symmetrical Profile, is a one-way stretch fabric that controls pistoning yet remains easy

to don. Heat moldable for easy stretching. Dark gray color. Sold each. From WillowWood.

Size Medium Plus Large Large Plus Extra Large

Prox. Circ1 30-54cm 33-64cm 41-80cm 46-90cm

Distal Circ2 20-32cm 25-36cm 32-47cm 37-55cm

Locking H442-1494 H442-1496 H442-1498 H442-1497

Cushion H440-1494 H440-1496 H440-1498 H440-1497


GEL SHEATHS

b. Skin Reliever Gel Sheath

The ALPS™ Skin Reliever eliminates shear forces, friction, and prevents abrasions on the skin of the stump. It

has both superior comfort and durability combined. It also accommodates volume fluctuations over the life

of the prosthesis. There is superior elongation for very little compression against the skin. There is no need

to make a new socket, ALPS™ Skin Reliever can be worn under silicone, gel, and pelite liners. Tapered from

3mm to 1.5mm. Sold each. From ALPS.

Fits Circumference* 16-20cm 21-28cm 28-31cm

Item No. ð ENCP-16 ENCP-20 ENCP-28


c. Angel Prosthetic Gel Sock

The Angel Prosthetic Gel Sock combines the ComforGel™ core with the advanced fiber technology of CoolMax®

with moisture wicking capabilities, and X-Static®—the Silver Fiber™ with natural anti-microbial properties

that reduce odor causing bacteria. Rugged nylon outer shell. Exceptional stretch in both length and width

conforms to irregular shapes. Soft fleeced interior. Sold each. From Comfort Products.

Sock Length 12” Length 14” Length 16” Length 18” Length 20” Length

9” Gel ANGELY ANGELY14 ANGELY16 ANGELY18 ANGELY20

9” Gel w/Hole ANGELY3 ANGELY143 ANGELY163 ANGELY183 ANGELY203

12” Gel ANGELY12 ANGELY14/12 ANGELY16/12 ANGELY18/12 ANGLEY20/12

12” Gel w/Hole ANGELY123 ANGELY14/123 ANGELY16/123 ANGELY18/123 ANGLEY20/123

Full Gel ANGELY12 ANGELY14FD ANGELY16FD ANGELY18FD ANGELY20FD

Full Gel w/Hole ANGELY123 ANGELY14FD3 ANGELY16FD3 ANGELY18FD3 ANGELY20FD3



PR

OS

TH

ET

ICS

d. ComforGel™ Sheath

Combines the benefits of a traditional sheath with the comfort offered by gel for below knee applications.

Specially formulated gel impregnated with medical grade mineral oil helps keep skin healthy. Conforms to

irregular shapes. Approximate 3 ply thickness. 14” overall length with 9” of gel. One size fits most BK ampu-

tees. Sold each. From Comfort Products.

Item No. ð CGELSH

e. Silosheath™

Provides optimal range of motion and comfort. Skin-friendly mineral oil gel helps prevent abrasion and skin

breakdown. May be used alone or with other interfaces. Three styles: 2-ply Original features 2mm of gel inside

the nylon sheath; Double Cushion features 3mm of gel and extra gel at distal end; 3-ply Extra Life features

2mm of gel between two nylon sheaths. Sold each. From Silipos. See page 545 for child size Silosheath™.

Size Short Short Medium Medium Large Large Large Narrow Regular Narrow Regular Narrow Regular Wide

Gel Length 10” (25cm) 10” (25cm) 13” (33cm) 10” (25cm) 13” (33cm) 13” (33cm) 13” (33cm)

Length 38-43cm 38-43cm 43-48cm 43-48cm 46-53cm 46-53cm 46-53cm

Prox Circumf 18-30.5cm 20-35.5cm 20-35.5cm 23-40.5cm 23-40.5cm 28-46cm 30.5-53cm

Distal Circmf 18-27cm 20-32cm 20-32cm 23-35.5cm 23-35.5cm 28-41cm 30.5-48cm

Original 13325 13335 13345 13355 13365 13375 13385

Double Cushion 13425 13435 13445 13455 13465 13475 13485

Extra Life 13825 13835 13845 13855 13865 13875 13885

DISTAL CUSHIONS and VOLUME MANAGEMENT

f. Padsil Silicone Distal Pad

The Padsil was developed to increase patient comfort in combination with ALPS™ liners. By increasing distal

pressure and enhancing vascular function in distal tissues, the more active user will appreciate the additional

cushioning, softness, and durability. Users who experience volume changes will also appreciate the Padsils

ability to lift the limb back into the proper position. They can be placed at the bottom of the socket or inside

a pin locking liner. Sold each. From ALPS.


Item No. ð PDS-S PDS-M PDS-L PDS-XL PDS-XXL

*Measurements taken 6cm from dista end.

g. Distal Cushions

Silicone cushions in multiple sizes and shapes create an intimate fit between lock and liner. Helps ensure that

the pin is seating completely with zero play, and offer extra cushion on the distal end. From Coyote Design.

Size Small Medium Large Set of 4

For Silicone Liner CD112SS CD112MS CD112LS CD112

For Gel Liner CD112SG CD112MG CD112LG CD112



PR

OS

TH

ET

ICS

DISTAL CUSHIONS and VOLUME MANAGEMENT — Continued

a. Silicone Gel Distal End Pad

Made of pure, soft silicone gel and designed to provide added distal cushioning and support when worn

inside a gel liner. Circular, 3/8” thick at center, gradually tapering to the outer edges. Available in five sizes.

Sold each. From ESP.

Diameter 1-3/4” 2” 2-1/8” 2-15/16” 2-3/4” 3.5” 4.5” 5.5” (4.45cm) (5.08cm) (5.39cm) (5.87cm) (6.98cm) (8.9cm) (11.4cm) (14cm)

Item No. ð ESP-DPXS ESP-DPS ESP-DPM ESP-DPL ESP-DPXL ESP-DP1 ESP-DP2 ESP-DP3

b. Silicone Gel Disc

Made of pure, soft silicone gel and designed to be worn in any area inside a gel liner for added cushioning,

compression or to relieve volumetric changes. Circular, 4mm thick at center, gradually tapering to the outer

edges. 4” diameter. Sold each. From ESP.

Item No. ð ESP-GD

c. Mineral Oil Gel Roll-On™

For use under urethane or silicone liner or at nighttime for skin conditioning and scar management. Soft,

conformable, all mineral oil gel. Rolls onto distal limb for enhanced socket liner fit and volume control. Melds

with other Silipos gel products. May be trimmed to fit. Approximately 2mm gel thickness. 6” length. Wash

with mild soap and water. 2 per package. From Silipos.

Size Narrow Medium Wide

Circumference 7.25” (18.5cm) 8.5” (21.5cm) 9.25” (23cm)

Item No. ð 1495 1496 1497

d. Alpha® Gel Cup

Provides an additional 3mm of gel to the distal end of residual limb. Sold each. From WillowWood.


Item No. ð ALA-CS-1 ALA-CM-1 ALA-CL-1 ALA-CX-1

e. Alpha® Volume Management Pad

Used between the limb and the liner in areas where volume has been lost. Made of the same skin-friendly

gel used in Alpha® liners. Each pad is 3mm thick and can be stacked on top of each other. Three sizes. 3 per

package. From WillowWood.

Size Small Medium Large One of Each

Item No. ð ALA-VM-SM ALA-VM-MD ALA-VM-LG ALA-VM



PR

OS

TH

ET

ICS

f. Alpha® Socket Pads

Fabric covered pads used inside the socket to relieve pressure points or sensitive areas. Four shapes. Sold in

sets of four. From WillowWood.

Shape Circular Oval, Small Oval, Large Tear Drop One of Each

6mm Thickness ALA-S6 ALA-S7 ALA-S8 ALA-S9 ALA-S0

12mm Thickness ALA-S1 ALA-S2 ALA-S3 ALA-S4 ALA-S5

g. Memory Foam Distal Cushion

Instead of using different shapes to create an intimate fit, use a Memory Foam Distal Cushion to fill the gap

between the liner and the lock. These cushions help ensure proper seating and keep the lock from being in

between clicks. A cushion is glued to the end of the liner using a unique adhesive, some liners need to be

rough on the distal end for adhesive. If using Air-lock, a distal cushion is rarely needed, but when needed, the

memory foam cushions are the best choice. 3 per package. Adhesive included. Sold set. From Coyote Design.

Item No. ð CD112MF

h. Secure-Ring System (SRS®)

Enhance suction and/or mechanical suspension of your prosthetic liner in minutes with the Secure-Ring Sys-

tem. Available in 2mm and 4mm thickness. Multiple rings may be used. Bonding adhesive included. From ESP.

Individual Rings Fits 14-22cm Fits 22-30cm Fits 30-39cm Fits 38-46cm

2mm Thickness ESP-SRS-2A ESP-SRS-2B ESP-SRS-2C ESP-SRS-2D

4mm Thickness ESP-SRS-4A ESP-SRS-4B ESP-SRS-4C ESP-SRS-4D

Description Item No.ò 4 Rings (1 of each size A-D, 2mm) ESP-SRS-2

4 Rings (1 of each size A-D, 4mm) ESP-SRS-4

8 Rings (1 of each size A-D, 2mm and 1 of each size A-D, 4mm) ESP-SRS-1

VALVES

i. Mini Expulsion Valve

Sold each. From ALPS.

Item No. ð MV009

LMV-009 Laminating Mini-Valve Kit



PR

OS

TH

ET

ICS

VALVES — Continued

a. CTFV Valve

Centri’s popular design. Sold each.

Item No. ð 721000040

b. CTFV-CSF Valve

Based on the CTFV valve, the CTFV-CSF valve is specifically designed to be used with thermoplastic sockets

and allows you to connect the socket to the frame. Features a knurled interior valve housing which prevents

turning. From Centri.

Item No. ð 721000039

721000041 Interior Valve House 721000044 Black Valve Gasket

721000042 Exterior Valve House Ring 721000045 Silicone Valve Gasket for CSF

721000043 Valve 721000050 Dummy

c. CSS Valve Kit with Lamination Washer

One-way expulsion valve creates suction when amputee stands or walks. Excellent suspension when used

with suspension sleeve. Kit includes parts listed separately. From Centri.

Item No. ð 721000089

721000090 CSS Valve Only

721000091 Lamination Housing Only

721000095 Filter for CSS Valve

d. CSS-R Valve Kit

Same function as the CSS Valve but pulls open to break suction. Excellent choice with seal-in designs. Kit

includes parts listed separately. From Centri.

Item No. ð 721000086

721000085 CSS-R Valve Only

721000091 Lamination Housing Only

721000087 Tool for CSS-R Valve

e. Mini Valve for Vacuum Sockets

Ideal for use with cushion liners with suspension sleeve for BK and knee disarticulation amputees. Sold each.

From Centri.

Item No. ð 721000060



PR

OS

TH

ET

ICS

f. CQL™ Auto Expulsion Valve

The CQL™ Auto Expulsion Valve can be retrofit or used with new fabrication tooling for easy installation in

new sockets. The built-in auto expulsion quietly expels air all day with no fuss. From Coyote Design.

Item No. ð CD105

CD103WH Lock Wrench

g. Lyn Valve BK and BK2

Designed for transtibial suction sockets, the Lyn Valve BK and BK2 (push button release) are auto expulsion

valves that release air at 0.5 psi without adjustment. 7/8” diameter. New or retro-installation outside of socket.

Threaded housing available for installation into thermoplastics. Sold each. From ESP.

Description Standard Metric

BK PA0200 PA0200M

BK2 (Push Button Release) PA0202 PA0202M

PA0222 Threaded Housing only, standard

PA0222M Threaded Housing only, metric

PA-LVD Lyn Valve Diaphragm

h. Lyn Valve RV

Designed for transfemoral applications, the Lyn Valve RV offers guaranteed reliability with no holes in valve

body to clog or trap skin. Releases air at 0.5 psi without adjustment. From ESP.


Auto Expulsion PA0002

Manual Expulsion PA0300

PA0120 Insert Only, Auto Expulsion PA0002/PI Solid Plug Insert

PA0301 Insert Only, Manual Expulsion PA0002/P Solid Plug Kit

PA0002/D Molding Dummy Kit PA0002/W Wrench

i. Flex Connect System

Eliminates the need for Velcro and rivets. Use with the Lyn Valve RV to lock your prosthetic sockets. This op-

tion creates a clean and secure connection between flexible socket and support frame. Sold kit. From ESP.

Item No. ð PA0050

PA0050/D Molding Dummy Kit

j. Lyn Valve RV Slide™

A compact suction socket valve with reliable auto expulsion that has the added feature of maintained, hands-

free open operation. Simply slide the operator button in any direction and the valve stays open eliminating

back-pressure for easy prosthetic donning and doffing. Audible “click” indicates manual operation. Use for

both AK and BK applications. Thermoplastic or lamination. Sold each. From ESP.

Item No. ð PA0400

PA0400/D Molding Dummy Kit



PR

OS

TH

ET

ICS


a. High Vac Barb

For use with High Vac Socket Systems and/or vacuum assisted donning. Installs directly into socket wall for

easy access by either retrofitting to pre-existing hard sockets or with use of pre-threaded housing for ther-

moplastic socket designs. Unique “swivel-stay” feature facilitates easy vacuum hose connection and a 90°

angle for low profile seating on socket surface. Internal safety shut-off valve prevents loss of vacuum if hose

becomes cracked or disconnected from barb. Sold each. From ESP.

Item No. ð PA0090

PA-PWSI-H Pre-threaded Housing

b. Pee Wee® Valve SI

Manually operated valve with high airflow capacity. Designed for upper limb sockets. Small and rugged,

low profile design—only 9/16” diameter, 1/4” height. New or retro-installation outside of socket. Threaded

-Housing available installation into thermoplastics. Sold each. From ESP.

Item No. ð PA-PWSI

PA-PWSI-H Pre-threaded Housing

c. SFS Valve (Scandinavian Flexible Socket)

Features low profile for improved cosmesis, deep undercut with vacuum channels and Delrin fabricated

housing. Sold each. From Fillauer.


SFS Valve, Non-Adjustable Leak Rate with Housing and Adhesive Coating 807488

SFS Valve, Non-Adjustable Leak Rate with Housing 807487

SFS Valve, Adjustable Leak Rate with Housing and Adhesive Coating 807480

SFS Valve, Adjustable Leak Rate with Housing 807479

807461 Valve only, Non-Adjustable Leak Rate

807453 Valve only, Adjustable Leak Rate

807388 Housing only

d. Leak-Rate Total Contact Valve

Permits controlled rate of airflow through valve when amputee stands or walks, allowing noiseless expulsion

of air from socket. Unique nylon ball-check provides one-way air flow adjustable by an external screw. Once

properly adjusted, no further adjustment is required. Supplied in two lengths. Aluminum; 1-1/4” (3.2cm)

diameter. Sold each. From Hosmer.


Model TCV-400L, 1” (2.5cm) Length 51981

Model TCV-400S, 1/2” (1.3cm) Length 51982

52001 Insert Only for TCV-400L

52002 Insert Only for TCV-400S



PR

OS

TH

ET

ICS

e. Red Dot Air Expulsion Valve

Red dot push button release. Aluminum body measures 7/8” (2.2cm) length. 1.25” (3.2cm) diameter. From

Hosmer.

Item No. ð 51936

51951 Model TCV-150, Insert Only

f. Plastic and Aluminum Screw-In Suction Valve

Includes aluminum housing and Delrin® insert with neoprene seals. Housing is 7/16” long to permit use in

walled socket. Easy to manipulate large valve release button. 1.25” (3.2cm) diameter. 7/16” (1.1cm) length.


Item No. ð 51971

51980 Model TCV-350, Insert Only

g. Thermo Valve

Designed to withstand heat during thermoplastic molding. Vacuum holes ensure positive connection be-

tween valve body and socket. 1-5/16” diameter body (1-1/2” diameter flange); 7/8” (2.2cm) long. Sold each.

From Hosmer.

Item No. ð 58190

51970 Model TCV-250S Insert only

h. One-Way Expulsion Valve

This valve is incredibly low profile, ultra lightweight and quiet. 1mm build height. Weighs less than 1/10 of

an ounce. Features an integrated filter. Sold in various size packs. From KISS.

Description Single Valve 10/Pkg 30/Pkg

Item No. ð CMP19/A CMP19/B CMP19/C

CMP20/A Reduced Shank Drill Bit

i. Push Button Valve

This very popular push-type manual expulsion valve is available with aluminum, stainless steel or Delrin®

housing with double O-ring. From Laurence Manufacturing.


with Aluminum Housing A100

with Stainless Steel Housing A120

with Delrin® Housing w/Double O-Ring A147

A123 Housing Only, Aluminum A125 Insert Only

A122 Housing Only, Stainless Steel A320-LO O-Ring for Delrin® Housing, 6/pkg

A149 Housing Only, Delrin® w/Double O-Ring



PR

OS

TH

ET

ICS


a. Air Expulsion Valve

Available with aluminum, stainless steel or Delrin® housing with double O-ring. Sold each. From Laurence

Manufacturing.


with Aluminum Housing A151

with Stainless Steel Housing A157

with Delrin® Housing w/Double O-Ring A158

A123 Housing Only, Aluminum A154 Insert Only

A122 Housing Only, Stainless Steel A320-LO O-Ring for Delrin® Housing, 6/pkg

A149 Housing Only, Delrin® w/Double O-Ring

b. Green Dot Total Contact Suction Valve

Available in aluminum and stainless steel. For laminating. Valve housing measures 0.4” (10.8mm) from bottom

of O-ring to top of thread. 0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate.

Valve key and dummy included with valves. Sold each. From Trulife.


Non-Adjustable, Aluminum P123501000

Adjustable, Aluminum P123502000

Non-Adjustable, Stainless Steel P123201000

Adjustable, Stainless Steel P123202000

20281 Housing Only, Aluminum P123302000 Insert Only, Adjustable

2460020000 Housing Only, Stainless Steel T156000000 Valve Key, Large

P123301000 Insert Only, Non-Adjustable

c. Green Dot Total Contact Suction Socket Valve

Plastic. For Thermoforming. Valve housing measures 0.4” (10.8mm) from bottom of O-ring to top of thread.

0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key included with valves.


Description Non-Adjustable Adjustable

Item No. ð P123101000 P123102000

2460010000 Housing Only P123302000 Insert Only, Adjustable

P123301000 Insert Only, Non-Adjustable T156000000 Valve Key, Large

d. Green Dot SFS Valve

Plastic. For Thermoforming. Valve housing measures 0.4” (10.8mm) from bottom of O-ring to top of thread.

0.9” (22mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key included with valves.



Item No. ð P123401000 P123402000

P20384 Housing Only P123302000 Insert Only, Adjustable

P123301000 Insert Only, Non-Adjustable T156000000 Valve Key, Large



PR

OS

TH

ET

ICS

e. Green Dot Super Seal® Valve System

A unique double O-ring valve system for thermoforming. Trulife has taken the popular Green Dot valve and

developed a new housing and application technique that provides a secure, leak-free system for vacuum

formed sockets. The Green Dot Super Seal valve system is available in plastic, aluminum and stainless steel;

adjustable or non-adjustable leak rate. Valve housing measures 3/8” (9.5mm) from bottom of O-ring to top

of thread. 11/16” (17.5mm) diameter at base of valve. Valve key, dummy and fabrication clamp included with

valves. Sold each. From Trulife.


Plastic, Adjustable P123902000

Aluminum, Non-Adjustable P123701000

Aluminum, Adjustable P123702000

Stainless Steel, Non-Adjustable P123801000

Stainless Steel, Adjustable P123802000

11278 Housing Only, Plastic P123301000 Insert Only, Non-Adjustable

11276 Housing Only, Aluminum P123302000 Insert Only, Adjustable

11277 Housing Only, Stainless Steel

f. Small Suction Socket Valve

Plastic. Push-Pull type. Two-part housing for thermoforming. Valve housing measures 0.4” (9.7mm) from

bottom of O-ring to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable

leak rate. Valve key included with valves. Sold each. From Trulife.


Item No. ð P190000003 P190000002

20326 Housing Only T132000001 Small Forming Tool

10221 Insert Only, Non-Adjustable T156000001 Valve Key, Small

DISCON Insert Only, Adjustable

g. Small Suction Socket Valve

Aluminum housing. One-part housing for laminating. Valve housing measures 0.4” (9.7mm) from bottom

of O-ring to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable leak rate.

Valve key included with valve. Sold each. From Trulife.


Item No. ð P190000006 P190000005

20328 Housing Only 10220 Insert Only, Adjustable

10221 Insert Only, Non-Adjustable T156000001 Valve Key, Small

h. Small SFS Valve

Plastic. One-part housing for thermoforming. Valve housing measures 0.4” (9.7mm) from bottom of O-ring

to top of thread. 0.6” (15.8mm) diameter at base of valve. Adjustable or non-adjustable leak rate. Valve key

included with valves. Sold each. From Trulife.


Item No. ð P190000009 P190000008

20276 Housing Only

T156000001 Valve Key, Small



PR

OS

TH

ET

ICS


a. BK Valve

An expulsion valve suitable for installation in distal BK sockets for use with suction suspension. Requires

minimum of 3/4” distal socket thickness for mounting in countersink hole (typically a laminated socket on

an attachment block). After drilling through the block from the distal end using a 5/16” drill bit, the hole is

countersunk from inside the socket with the countersink (T36201). Valve is then inserted using the valve key

(T36200). Valve Kit includes valve, adapter, dummy and valve key. From Trulife.


BK Valve Only P36110

BK Valve Kit with Regular 4-Ear Pyramid, Stainless Steel DISCON

BK Valve Kit with Regular 4-Ear Pyramid, Titanium P36101

BK Valve Kit with Large 4-Ear Pyramid, Stainless Steel P36102

BK Valve Kit with 3-Prong Dome Adapter P36104

T36201 Countersink

T36200 BK Valve Key

LOCKING DEVICES

b. Lock Series 200

Suitable for thermoplastic and laminated sockets, the Lock Series 200 features a light, flat construction, rota-

tion secured laminating disc and aluminum housing. Easy cleaning and replacing of complete locking unit is

possible without dismantling the prosthesis. Dummy included. Sold kit. From Euro International.

Description Clutch-Lock Shuttle-Lock Easy-Lock


Item No. ð 10S1 10S2 10S3

10S2/E335 Geared Pin, 35mm 10S2/E360 Rastered Pin, 60mm

10S2/E350 Geared Pin, 50mm 10S3/E335 Plain Pin, 35mm

10S2/E360 Geared Pin, 60mm 10S3/E350 Plain Pin, 50mm

10S2/E335 Rastered Pin, 35mm 10S3/E360 Plain Pin, 60mm

10S2/E350 Rastered Pin, 50mm

10S1

10S2

10S3



PR

OS

TH

ET

ICS

c. ALPSLock™ with Pyramid

The ALPSLock™ S498-P features a smooth gear mechanism, durable glass reinforced nylon lock body, infinite

pin adjustment, quiet operation, convenient side mounted release button and removable gear housing. In-

cludes integrated pyramid. S498-P must be used with laminated socket. Rated to 220 lb (100kg). From ALPS.

Item No. ð S498-P

FAB-946 Fabrication Kit LDP-695 Serrated Pin

LDB-899P Body w/Pyramid LDA-694 Hex Nut Adapter

LDH-694A Locking Mechanism LDD-694A Dummy Plug

d. ALPSLock™ with 4-Hole Plate

The ALPSLock™ S496-T features a smooth gear mechanism, durable glass reinforced nylon lock body, light-

weight, infinite pin adjustment, quiet operation, convenient side mounted release button and removable

gear housing. Universal pin can be used with all types of liners. No weight limit. Includes 4-Hole Universal

Mounting Plate. From ALPS.

Item No. ð S496-T


UMP-496 Plate LDA-694 Hex Nut Adapter


e. ALPSLock™ (No Attachment)

The ALPSLock™ S496-W features a smooth gear mechanism, durable glass reinforced nylon lock body, light-

weight, infinite pin adjustment, quiet operation, convenient side mounted release button and removable

gear housing. Universal pin can be used with all types of liners. No weight limit. From ALPS.

Item No. ð S496-W


LDB-694A Body LDA-694 Hex Nut Adapter


UMP-496 Universal Mounting Plate

f. APC Shuttle Lock Kit

Rated to 365 lbs. 2 year warranty. Kit includes push lock with medium length release pin (63mm diameter x

25mm height), locking pins with 10mm thread, O-rings, retaining washers, screws and tube of Loctite® 242.


Description Small Pin Medium Pin Long Pin

Item No. ð LOC-APC-1SM LOC-APC-1MED LOC-APC-1LONG

LOC-APC-1.00-PIN Replacement Pin, short

LOC-APC-1.75-PIN Replacement Pin, medium

LOC-APC-2.50-PIN Replacement Pin, long



PR

OS

TH

ET

ICS

LOCKING DEVICES — Continued

ProAdvantage® Attachment Kits

ProAdvantage® has been the industry leader for over a decade. And now the best lock on the market just got

better. All 650 and 600 kits now feature ClickLock™—an audible locking mechanism that enhances patient

safety and security by providing an audible click when properly engaged. The geared clutch assembly assures

the patient cannot inadvertently release suspension. Each attachment kit is manufactured to precise specifica-

tions. Components have been tested and CE certified in accordance with applicable structural tests for lower

limb prostheses. Kits include body, laminating or thermoplastic ring or sleeve, tooling, pin and hardware.

ProAdvantage® Attachment Kits at a Glance

Item No. Description Dimensions/Weight

IRS-650-AK-L Modular Clutch Lock w/ClickLock™ L 2-7/8” x W 2” x H 3/4” Aluminum Body, Stainless Steel Liner 116g For use in Lamination Applications

IRS-650-AK-T Modular Clutch Lock with ClickLock™ L 2-7/8” x W 2” x H 3/4” Aluminum Body, Stainless Steel Liner 116g For use in Thermoplastic Applications

IRS-600-AKTP Clutch Lock with ClickLock™ L 2-3/4” x W 1-3/4” x H 2-1/2” Aluminum Body, Titanium Liner, 192g Titanium Pyramid For use in Lamination, Thermoplastic or Exoskeletal Applications

IRS-600-AKT Clutch Lock with ClickLock™ L 2-3/4” x W 1-3/4” x H 1-5/8” Aluminum Body, Titanium Liner 144g For use in Lamination, Thermoplastic or Exoskeletal Applications

IRS-600-AK Clutch Lock with ClickLock™ L 2-7/8” x W 1-3/4” x H 1-5/8” Delrin® Body 105g For use in Lamination, Thermoplastic or Exoskeletal Applications

IRS-200-AK Ratchet Lock L 2-1/2” x W 1-5/8” x H 1-5/8” IRS-150-AK Delrin® Body 91g (200), ??? (150) For use in Lamination, Thermoplastic or Exoskeletal Applications

a. ProAdvantage® Attachment Kit 650

Kit includes laminating ring (AK-L) or thermoplastic ring (AK-T), body, body mounting screws, modular mount-

ing screws, spacers, tooling, 10mm pin and T-wrench. Instruction pamphlet also included.


Lamination IRS-650-AK-L

Thermoplastic IRS-650-AK-T

IRS-650-LR Laminating Ring IRS-650-SPACERS Spacers (4)

IRS-650-TPR Thermoplastic Ring IRS-650-T Tooling (includes IRS-650-TS)

IRS-650-B Body IRS-650-TS Tooling Centering Screw

IRS-650-BMS Body Mounting Screws (4) IRS-600-API-RPC Pin, 10mm x 2-3/4”

IRS-650-MMS Mounting Screws (4) IRS-650-W T-Wrench

IRS-600-PSW Pin Seal IRS-650-LR Round Aluminum Laminating Ring



PR

OS

TH

ET

ICS

b. ProAdvantage® Attachment Kit 600-AKT and 600-AKTP

Kit includes body, tooling, 10mm pin, T-wrench, Delrin® laminating sleeve and hex wrench. Instruction pam-

phlet also included.


Standard IRS-600-AKT

with Titanium Pyramid (pictured) IRS-600-AKTP

IRS-600-BT Body (AKT) IRS-650-W T-Wrench

IRS-600-BTP Body w/Pyramid (AKTP) IRS-600-LS Delrin® Laminating Sleeve

IRS-200-T Tooling IRS-600-LW Hex Wrench

IRS-600-API-RPC Pin, 10mm x 2-3/4” IRS-600-C ClickLock Cartridge

IRS-600-PB Push Button for ClickLock IRS-600-CW Cartridge Wrench

IRS-600-ELB Extended Length Button

c. ProAdvantage® Attachment Kit 600-AK



Item No. ð IRS-600-AK

IRS-600-B Body IRS-650-W T-Wrench

IRS-200-T Tooling IRS-600-LS Delrin® Laminating Sleeve

IRS-600-API-RPC Pin, 10mm x 2-3/4” IRS-600-LW Hex Wrench

IRS-600-C ClickLock Cartridge IRS-600-PB Push Button for ClickLock

IRS-600-CW Cartridge Wrench IRS-600-PSW Pin Seal

IRS-600-ELB Extended Length Button

d. ProAdvantage® Attachment Kit 200-AK and 150-AK



Description Item No.ò Push Button Kit, Large IRS-200-AK

Push Button Kit, Small IRS-150-AK

IRS-200-B Body IRS-200-W Pin Wrench

IRS-200-T Tooling IRS-200-LS Delrin® Laminating Sleeve

IRS-200-API Pin, 10mm x 3” IRS-200-SW Sleeve/Washer Adapter

IRS-150-API Pin, 10mm x 2.125” IRS-200-C Catch SS Push Release Kit

IRS-200-PB Push Button with Stud IRS-200-SP Spring Push Release Kit

Optional Components for ProAdvantage® Attachment Kits

650-AK-L 650-AK-T 600-AKT 600-AKTP 600-AK 200-AK

IRS-600-API-RPC 3 3 3 3 3 10mm, L 68mm

IRS-600-AP3-RPC 3 3 3 3 3 1/4-20, L 68mm

IRS-200/500ELB 3 3 3 3 3 3 Extended Length Button

IRS-500-ELS 3 3 3 Extended Length Sleeve

IRS-200-ELS 3 Extended Length Sleeve

IRS-200-MA 3 3 Modular Adapter Ring

IRS-200-PA 3 3 Pyramid Adapter



PR

OS

TH

ET

ICS


a. Air-Lock™

At 97 grams, the Air-Lock™ is ideal for most lower extremity cases, laminated or thermoformed. With a smaller

shape, and at only 51 grams, the Small Air-Lock™ may be used for pediatrics, smaller limb shapes and upper

extremity applications. Both are waterproof, lightweight and suitable for any activity level. Features include

an integrated suction valve, single lamination fabrication, completely replaceable locking mechanism and

acetyl construction for reduced wear and tear. Fast Four Connector allows for easy use in test socket and in

definitive socket. Sold each. From Coyote Design.


Air-Lock™with Lock Pin CD103

Air-Lock™with Long Lock Pin CD103L

Air-Lock™with Lock Pin, Small CD103S

CD103LP Air-Lock Lock Plate CD103FFLP Low Profile Fast Four Connector

CD103P6 Lock Pin Assembly CD103AF Aligned Four Connector

CD103P9 Lock Pin Assembly, Long CD103MDI Insert for Alignable Connector

CD103FF Fast Four Connector CD103SDI Insert for Align Connector, Single Dir Offset

CD103RBC Release Button Cover CD103LFC Large Casting and Fab Dots, 50/bag

CD103WH Lock Wrench CD103SFC Small Casting and Fab Dots, 200/bag

CD316A Casting Handle and Pin

b. Suction Lock

The Suction Lock is similar to the original Air-Lock but offers some improvements for the practitioner, tech-

nician and amputee. It offers improved suspension and reduced pistoning and traction over traditional pin

systems with its patented airtight mechanism. The lock maintains an airtight suction socket regardless of pin

location, as the Air-Lock does. However the new funnel shape, longer standard pin and higher engagement

point of the Suction Lock make donning easier. The new shape also offers a more positive and stable pin

engagement. Suction Lock components are rated to 265 lb. Sold each. From Coyote Design.


Suction Lock, No Connector CD113

Scution Lock with Aligned Four Connector CD113LA

Suction Lock with Fast Four Connector for Thermoforming CD113TF

Suction Lock with Fast Four Connector for Laminating CD113LF

CD113AF Aligned Four Connector CD112MG Distal Cushion, 2.45” diameter

CD113FF Fast Four Connector CD112SS Distal Cushion, 2.36” diameter

CD113HG Housing only CD112MS Distal Cushion, 2.75” diameter

CD113P8 Pin only CD112LS Distal Cushion, 3.15” diameter

CD316 Casting Handle and Pin

c. EOVC Lock

The EOVC Lock is very similar to the Air-Lock and Suction Lock in that it stays airtight helping to create “suc-

tion” in the socket. The advantage of the EOVC is the design allows it to be used with elevated vacuum. Its

unique lever design also helps make doffing of the socket easy, especially for amputees with hand strength

issues, arthritis, or trouble reaching the release button. Sold each. From Coyote Design.

Item No. ð CD114

UMP-496 Plate

LDH-694A Locking Mechanism

CD316 Casting Handle and Pin



PR

OS

TH

ET

ICS

d. Modular Shuttle Lock with Delrin Housing

Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold separately. From Fillauer.


Modular Shuttle Lock with Delrin Housing 125459

809780 Large Delrin Shuttle Housing 809711 Shuttle Lock

809782 Shuttle Body 809756 Compression Spring

809784 Button Shield 809783 Guide Screw

809731 Latch Pin 880033 6-32 x 5/16” Socket Head Set Screw

809785 Latch Pin Button 809787 Pe-Lite™ Washer

Shuttle Lock Sub Assembly 809746


809711 Shuttle Lock 880033 6-32 x 5/16” Socket Head Set Screw

Fabrication Kit (Thermoforming and Lamination) 125200

809790 Shuttle Body Dummy 880494 5/16-18 x 3” Socket Head Set Screw

809791 Button Shield Dummy

Plungers

809722 Plunger, 1” with 1/4-20 Thread 809725mm Plunger, 1.5” with M10 Metric Thread

809725 Plunger, 1.5” with 1/4-20 Thread 809727mm Plunger, 2” with M10 Metric Thread


809722mm Plunger, 1” with M10 Thread 809721mm Plunger, 3” with M10 Metric Thread

e. Small Modular Shuttle Lock with Delrin Housing



Small Modular Shuttle Lock with Delrin Housing and 1” Plunger 125410 125410MM

Small Modular Shuttle Lock with Delrin Housing and 1.5” Plunger 125412 125412MM

809810 Shuttle Lock Body, Small 809816 Shuttle Lock

809820 Housing 809760 Compression Spring



809775 Latch Pin Button




Fabrication Kit (Thermoforming and Lamination) 125420-FL

809824 Housing Dummy 880488 1/4-20 x 2” Socket Head Set Screw


Plungers





PR

OS

TH

ET

ICS


a. Modular Shuttle Lock with Titanium Pyramid

Rated to 300 lb. Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold sepa-

rately. From Fillauer.


Modular Shuttle Lock with Titanium Pyramid 125460-FL

809795 Titanium Pyramid Housing 809711 Shuttle Lock





124183 Lamination Cap





809790 Shuttle Body Dummy 880494 5/16-18 x 3” Socket Head Set Screw


Plungers





b. Modular Shuttle Lock with Cylindrical Housing

Rated to 300 lb. Kit includes housing, shuttle lock assembly and fabrication instructions. Plungers sold sepa-

rately. From Fillauer.


Modular Shuttle Lock with Titanium Pyramid 125462

809795 Cylindrical Housing 809711 Shuttle Lock



809731 Latch Pin 880033 5/16-18 x 3” Socket Head Set Screw






809865 Fabrication Body Dummy 880494 5/16-18 x 3” Socket Head Set Screw

809791 M6 x 1 x 16mm SHSS Cone Point

Plungers







PR

OS

TH

ET

ICS

c. Modular Shuttle Lock with 4-Hole Housing



Modular Shuttle Lock with Titanium Pyramid 125461

809792 4-Hole Shuttle Housing 809711 Shuttle Lock





880282 Screw, M6 x 1 x 20mm

Fabrication Kit (Lamination) 125204

809790 Shuttle Body Dummy 882610 M6 x 10 Socket Set Screw (4)

809791 Button Shield Dummy 885215 Nut, 5/16-18 Acorn

880494 5/16-18 x 3” Socket Head Set Screw 809798 Jam Screw

809794 Flattening Plate 809799 Jam Screw

Fabrication Kit (Thermoforming) 125202

809790 Shuttle Body Dummy 882610 M6 x 10 Socket Head Set Screw (4)

809791 Button Shield Dummy 809800 Camlock Assembly

880494 5/16-18 x 3” Socket Head Set Screw 809801 Hole Punch

809793 Flattening Plate

Plungers





d. Original Shuttle Lock

Sold kit. From Fillauer.


Original Shuttle Lock Kit (without Punger) 125229 N/A

Original Shuttle Lock Kit with 1” Plunger 125234 125234MM

Original Shuttle Lock Kit with 1.5” Plunger 125232 125232MM

Original Shuttle Lock Kit with 2” Plunger 125237 125237MM

809747 Shuttle Lock Body 809730 Latch Pin Button

125345 Button Shield 809732 Mounting Nut

809712 Guide Screw Assembly 809757 Pe-Lite™ Washer, 3/4”

809731 Latch Pin 809758 Pe-Lite™ Washer, 1”

Fabrication Kit 125239

125314 Threaded Plug, 3/4-16 x 1” 880490 Set Screw, 5/16-18 x 2”

125315 Distal Socket Plug 885347 Hex Key, 1/4”

125348 Plug Screw F/Shield 880928 Threaded Plug Screw, 3/4-16 x 3/8”

Plungers







PR

OS

TH

ET

ICS


a. Original Shuttle Lock with Unitized Housing

Rated to 220 lb. Sold kit. From Fillauer.


Original Shuttle Lock with Unitized Housing 125210

809747 Shuttle Lock Body 809730 Latch Pin Button

125345 Button Shield 124183 Lamination Cap

809712 Guide Screw Assembly 809757 Pe-Lite™ Washer, 3/4”

809731 Latch Pin 809758 Pe-Lite™ Washer, 1”

809750 Unitized Housing Kit 809754 Unitzed Housing


125314 Threaded Plug, 3/4-16 x 1” 880490 Set Screw, 5/16-18 x 2”

125315 Distal Socket Plug 885347 Hex Key, 1/4”

125348 Plug Screw F/Shield 880928 Threaded Plug Screw, 3/4-16 x 3/8”

Plungers





b. External Clutch Lock


Item No. ð 140100

c. Cylindrical Lock System



with 1” Plungers 125240

with 1.5” Plungers 125241

809730 Latch Pin Button 809873 Cylindrical Lock Body

809739 Latch Pin 880285 M6 x 1 x 25mm Flat SHCS (4)


809864 Fabrication Dummy Body 880494 5/16-18 x 3” Socket Head Set Screw

880275 M6-1 x 16mm Socket Head Set Screw 809791 Button Shield Dummy

Plungers







PR

OS

TH

ET

ICS

d. Clutch Lock System with Delrin Housing



Clutch Lock with Delrin Housing 140000

140002 Delrin Housing 140065 Fabrication Kit for Clutch Lock

140150 Clutch Lock Cartridge w/Air Expulsion 140116 Latch Pin


140060 Wrench 880488 1/4-20 x 2” Socket Head Set Screw

140061 Clutch Housing Dummy 881351 Brass Nail

140062 Distal Attachment Dummy

Plungers

140040 Plunger, 2” with 1/4-20 Thread 140043 Plunger, 2” with M10 Metric Thread

140041 Plunger, 1.5” with 1/4-20 Thread 140044 Plunger, 1.5” with M10 Metric Thread

e. Clutch Lock System with Titanium Pyramid



Clutch Lock with Titanium Pyramid 140010

140013 Pyramid Housing 140065 Fabrication Kit for Clutch Lock


124183 Lamination Cap





Plungers



f. Clutch Lock System with Cylindrical 4-Hole Housing



Clutch Lock with Cylindrical 4-Hole Housing 140020

140023 Cylindrical 4-Hole Housing 140065 Fabrication Kit for Clutch Lock


880282 M6 x 1 x 20mm FHSCS 882613 M6 x 1 x 12mm Socket Head Cap Screw





Fabrication Dummy Kit (Cylindrical 4-Hole Housing) 140070

140063 Fabrication Dummy 882610 M6 x 1 x 10mm Socket Head Set Screw

140062 5/16-18 x 3” Socket Head Set Screw

Plungers





PR

OS

TH

ET

ICS


a. Gator Grip Lock with Delrin Housing



Gator Grip Lock with Delrin Housing 141001

141110 Delrin Housing 141140 Release Rack

141105 Release Assembly with Spring 141142 Button Shield

027827 Compression Spring 141144 Latch Pin Button

140106 Latch Pin

Lock Mechanism 141100

141110 316 SS 7/32” Ball Bearing (4) 141130 Modular Lock Cartridge Housing, Titanium

141112 316 SS Internal Retaining Ring 141132 Ball Retainer

141114 316 SS Flat Washer 027826 Conical Compression Spring, SS

141120 Gear driven Release Cam 882410 Cam Follower Spacer

141122 Cam Follower Spacer


141190 Fabrication Dummy 141195 Button Dummy

141192 1.5” Plunger Extension 880494 516-18 x 3” Socket Head Set Screw

141194 2” Plunger Extension

Metric Thread Plungers

141015 Smooth Rigid Plunger, 1” 141010 Flexible Plunger, 1.5”

141016 Smooth Rigid Plunger, 1.5” 141011 Flexible Plunger, 2”


b. Gator Grip Lock with Pyramid Housing



Gator Grip Lock with Delrin Housing 141002

141160 Pyramid Housing 141140 Release Rack

141105 Release Assembly with Spring 141142 Button Shield

027827 Compression Spring 141144 Latch Pin Button

140106 Latch Pin 124183 Lamination Dummy for Pyramid Adapter

Lock Mechanism 141100

141110 316 SS 7/32” Ball Bearing (4) 141130 Modular Lock Cartridge Housing, Titanium

141112 316 SS Internal Retaining Ring 141132 Ball Retainer

141114 316 SS Flat Washer 027826 Conical Compression Spring, SS

141120 Gear driven Release Cam 882410 Cam Follower Spacer

141122 Cam Follower Spacer


141190 Fabrication Dummy 141195 Button Dummy

141192 1.5” Plunger Extension 880494 516-18 x 3” Socket Head Set Screw

141194 2” Plunger Extension

Metric Thread Plungers


141016 Smooth Rigid Plunger, 1.5” 141011 Flexible Plunger, 2”




PR

OS

TH

ET

ICS

c. BASE Shuttle Lock

Features versatile cylindrical body with standard 4-hole attachment, serrated pin and deep pin well for easy

insertion. Rated to 220 lb. Sold kit. From ST&G.

Item No. ð 3140

d. Titanium Shuttle Clutch Lock Kit with Flexible Lamination Connector

Kit includes Titanium Shuttle Clutch Lock Body, Titanium Flexible 3-Prong or 4-Prong Connector, Clutch Lock

Pin and Lamination Dummy. Rated to 300 lb. Sold kit. From TiMed.

Description Item No.ò Shuttle Lock Kit with Flexible Titanium 3-Prong Connector and Lamination Dummy TA-325T-3

Shuttle Lock Kit with Flexible Titanium 4-Prong Connector and Lamination Dummy TA-325T-4

Shuttle Lock Kit with Flexible Titanium 3-Prong Connector (pictured) TA-325-3

Shuttle Lock Kit with Flexible Titanium 4-Prong Connector TA-325-4

A-701 Titanium Shuttle Clutch Lock Body, 117g

SS-511-3 Flexible Titanium 3-Prong Connector, 55g

SS-511-4 Flexible Titanium 4-Prong Connector, 55g

A-703 Clutch Lock pin, 21g


e. Titanium Shuttle Clutch Lock Kit with Lamination Connector

Kit includes Titanium Shuttle Clutch Lock Body, Stainless Steel 3-Prong or 4-Prong Connector, Clutch Lock Pin

and Lamination Dummy. Rated to 300 lb. Sold kit. From TiMed.

Description Item No.ò Shuttle Lock Kit with Flexible Stainless Steel 3-Prong Connector and Lamination Dummy SS-325T-3

Shuttle Lock Kit with Flexible Stainless Steel 4-Prong Connector and Lamination Dummy SS-325T-4

Shuttle Lock Kit with Flexible Stainless Steel 3-Prong Connector (pictured) SS-325-3

Shuttle Lock Kit with Flexible Stainless Steel 4-Prong Connector SS-325-4

A-701 Titanium Shuttle Clutch Lock Body, 117g

SS-511 Stainless Steel 3-Prong Connector, 109g

SS-521 Stainless Steel 4-Prong Connector, 145g

A-703 Clutch Lock pin, 21g


f. Modular Master Lock™

A two-part clutch system designed for lamination. Rated to 220 lb. Kit includes Pin, Screws, Laminating Screw,

Laminating Ring. Sold kit. From Trulife.

Item No. ð P35530

P23273 Master Lock Pin only 18752-002 M6-1.0P x 8mm SHCS, black

P21064 Laminating Screw 18758-001 M6-1.0P x 16mm FHSCS, black

P23280 Laminating Ring 20109-001 Escutcheon Pin 16GA x 5/8, brass

P23282 Anchor Plate 21545-001 Kevlar Hank, 94cm

P23283 Pin Guide Spacer



PR

OS

TH

ET

ICS


a. Aluminum Master Lock™ with Titanium Pyramid

Rated to 220 lb. Product weight 185g. Kit includes Pin, Screws, Conic Laminating Tool and T-Tool. From Trulife.

Item No. ð P35540

P23273 Master Lock Pin only

P13283 Push Button Gear Assembly, large

P23281 Conic Lamination Tool

20102-001 M8-1.2P x 60mm SCHS, black

21545-001 Kevlar Hank, 94cm

20109-001 Escutheon Pin, 16GA x 5/8, brass

b. Littig Master Lock™

For thermoformed or composite sockets. Rated to 220 lb. Standard 4-hole pattern. Removable. Kit includes

Pin, Screws, Forming Tool, Anchor Plate and T-Tool. Sold kit. From Trulife.

Item No. ð P35501

P23273 Master Lock Pin only

P13282 Push Button Gear Assembly, small

P23274 Screw for Littig Hip Master Lock Cup

P21591 Internal Forming Tool for Thermoplastic System



20109-001 Escutcheon Pin 16GA x 5/8, brass

c. Alpha® Lamination Lock

Small in size, lightweight and can be used in either a one-step or two-step lamination. With the incorpora-

tion of an attachment plate in a two-step lamination, various angle options can be utilized to optimize foot

alignment instead of allowing the shuttle lock to dictate alignment. Two pins are included with each lock.



Standard (pictured) 700-AL600

with Titanium Pyramid 700-AL601

700-AL602 Lock Mechanism

700-AL603 Attachment Plate

d. Alpha® Suction Pro

Provides outstanding suction suspension in either thermoplastic or laminated sockets. Features a mainte-

nance-free air expulsion valve, provides additional distal cushioning and can be used on both transtibial and

transfemoral prostheses. Rated to 250 lb (113kg). Requires Lamination Tooling Kit (700-SP110) when used with

a laminated socket. Requires Thermoplastic Tooling Kit (700-SP111) when used with a thermoplastic socket.

One year warranty. From WillowWood.


Alpha® Suction Pro 700-SP100

Alpha® Suction Pro with Titanium Pyramid 700-SP101

700-SP300 Valve Kit Only

700-SP110 Lamination Tooling Kit (Reusable)

700-SP111 Thermoplastic Tooling Kit (Reusable)



PR

OS

TH

ET

ICS

e. Alpha® Interlock Suspension System

Using the Alpha® Interlock Suspension System, upon installing a single distal adapter into a socket, practition-

ers gain the ability to interchange suspension methods from a pin lock, a lanyard lock or a suction device

without remaking the socket. The distal adapter can be used in laminated or thermoplastic socket designs.

The system can be used in both transtibial and transfemoral prostheses and is offered in several configura-

tions. The Complete Kit includes three distal adapters plus an Alpha® Lock Body, an Alpha® Lanyard Body, a

Suction Insert Body and a fabrication post. Rated to 250 lb (115kg). One year warranty. From WillowWood.


Complete Kit AIS-KIT

System featuring Alpha Lanyard 700-AIS100

System featuring Alpha Lanyard with Titanium Pyramid 700-AIS101

System featuring Alpha Lock 700-AIS480

System featuring Alpha Lock with Titanium Pyramid 700-AIS481

System featuring Alpha Suction Insert 700-AIS500

System featuring Alpha Suction Insert with Titanium Pyramid 700-AIS501

700-AIS102 Distal Adapter 700-AIS482 Lock Pin, 1-1/2”

(Includes Fabrication Post) 700-AIS483 Hardware Kit

700-AIS103 Lanyard Attachment Cord 700-AIS484 One-Way Valve

700-AIS104 Fabrication Post 700-AIS486 Suction Insert Body Only

700-AIS105 Forming Plate 700-AIS487 Poron Filter

700-AIS106 Post Decal Set (10) 700-AIS488 Lock Pin, 2”

700-AIS107 Lanyard Body Only 700-AIS489 O-Rings (10)

700-AIS108 Lanyard Suction Cup 700-AIS492 Lock Body Only

700-AIS109 Lanyard Power Grip 700-AL490-OLD Lock Body Only, Old Style

f. Suction Spacer Plate

The Suction Spacer Plate contains a maintenance-free expulsion valve and is used for converting any socket

with a 4-hole pattern into a suction socket. 3/8” (9.5mm) thick. Product weight 36g. The Suction Spacer Plate is

available by itself or as one of several kits with a 4-hole component. Rated to 250 lb (113kg). From WillowWood.


Suction Spacer Plate Only 700-SP500

with Titanium Pyramid Receiver 700-SP501

with Titanium Pyramid 700-SP502

with Aluminum Slide Pyramid 700-SP503

with 5mm Offset Composite Pyramid 700-SP504

with 10mm Offset Composite Pyramid 700-SP505

g. Suction Pyramid

Recommended for laminated sockets, the Suction Pyramid incorporates a one-way air expulsion valve within

a 4-hole pyramid adapter. Available in stainless steel or titanium, the Suction Pyramid can be purchased by

itself or in a kit with a laminated socket attachment block. Rated to 250 lb (113kg). From WillowWood.


Kit, Stainless Steel 700-SP460

Stainless Steel 700-SP461

Kit, Titanium 700-SP470

Titanium 700-SP471

Magnum Titanium 4-Hole Version MHD-SP4

700-AL486 One-Way Valve

700-AB452 Screen

700-AIS487 Poron Filter



PR

OS

TH

ET

ICS


a. LimbLogic™ VS

The latest in vacuum suspension technology is LimbLogic VS. This is the first remote-controlled vacuum sus-

pension system on the market. The 4-Hole Controller is mounted inline on a prosthesis allowing for complete

integration without the unit catching on clothing. LimbLogic VS can now be used in thermoplastic sockets

as well as laminated sockets.

Unique in the elevated vacuum market, the LimbLogic VS 4-Hole Controller is waterproof. To attain this

feature LimbLogic VS was thoroughly tested and met waterproof standards set by the International Electro-

technical Commission. Individuals with LimbLogic VS in their prostheses no longer need to avoid inclement

weather or wet environments. Note that the hand-held fob should not become wet as it is not waterproof.

LimbLogic VS operates quietly and features ‘Set & Forget’ monitoring. This means that the system monitors

the level of vacuum within the socket to maintain a secure and comfortable fit. Practitioners program Limb-

Logic VS for a set range of vacuum. Amputees may use the hand-held fob to adjust the vacuum level within

the practitioner-set range.

For added versatility, LimbLogic VS may be fabricated into laminated sockets or thermoplastic sockets. For

laminated sockets, a lamination 4-hole kit is included with the controller and fob. A unique drop-in adapter

enables LimbLogic VS to be used with thermoplastic sockets. From WillowWood.

Description Thermoplastic Lamination

LimbLogic™ VS 4-Hole Kit LLV-1600-T LLV-1600-L

LimbLogic™ VS 4-Hole Bilateral Kit LLV-1602-T LLV-1600-L

LLV-KIT-L Lamination Fab Kit LLV-01060 Rubber Charging Port Cover

LLV-KIT-T Thermoplastic Fab Kit LLV-01065 Steel Charging Port Cover

LL-01200 Key Fob Kit LLV-01066 Charging Port Cover

LL-01220 Key Fob Torx Driver LLV-01070 Interlock Gasket, Set of 5

LL-01230 Key Fob Keeper LLV-01071 Poron Filter

LL-01240 Fob Replacement Battery CR2 LLV-01080 Port Cover w/Drain Tube

LLV-01011 Batt Charger for LLV-1500 LLV-01100 Suction Pad

LLV-01030 Vent Cover LLV-02100 Thermoplastic Tooling Kit

LLV-01041 4 Hole Attachment LLV-1300 Diagnostic Kit

LLV-01042 4 Hole Vacuum Controller LV-01011 Charger Pack

LLV-01043 Vacuum Plate Adaptor LLV-01045 4 Hole Thermo Transfer Plate

LLV-01044 Pyramid Adaptor LLV-01046 Cosmetic Finishing Kit

Alpha® Flex Sleeve

Size 2 3 4 5 6 7 8

Thigh* 8.8-12.3” 9.5-13.4” 13-18” 14-20” 16-22” 17.7-25” 19-26”

Patella 7.8-11” 9-13” 11-15.4” 12.6-17.5” 14-19.3” 15.5-21.7” 17-23.6”

Buff ALS-52B ALS53B ALS-54B ALS-55B ALS-56B ALS-57B ALS-58B

Black ALS-52BK ALS53BK ALS-54BK ALS-55BK ALS-56BK ALS-57BK ALS-58BK

*Measured 6” above patella.



PR

OS

TH

ET

ICS

b. Alpha® G-Lock

The G-Lock includes a one-way expulsion valve to provide suction suspension as well as a standard pin lock-

ing mechanism with pin seal. A clever new feature allows the user to secure the locking pin in place at the

nearest groove, meaning that amputees no longer have to worry about “getting caught between clicks.”

With this unique design, amputees receive the security of a pin while minimizing pistoning through the use

of suction. With its drop-in design, the G-Lock is CAD-friendly yet is also easy to work with in traditional

fabrication processes. For use in laminated or thermoplastic sockets, the G-Lock is easy to fabricate, allows

for one-step lamination, and has a four-hole pattern for attachment to the socket. Rated to 250 lb. Includes

one 38mm pin. One year warranty. From WillowWood.


Alpha® G-Lock 700-GL480

Alpha® G-Lock with Pyramid 700-GL481

700-GL482 Pin, 10mm x 38mm

700-GL488 Pin, 10mm x 51mm

700-GL491 Lamination Tool

700-GL492 Thermoplastic Tooling

c. Edison™

View vacuum suspension in a new light.

Edison is Silent. Large-bore piston operates at low speeds with high efficiency. In-line pump is housed in a

protective, insulated casing.

Edison is Adaptive. It automatically varies vacuum to meet the specific needs of daily activities, and assures

optimal comfort when patient is at rest. Variable vacuum levels may add benefit to patients suffering from

residual limb discomfort associated with dysvascular conditions. 18-hour battery and patient input free control

allow for true worry-free performance.

Edison is Intelligent. Prosthetists can select from one of three standard patient, or customizable vacuum range

profiles. On board memory allows prosthetist to verify device and socket performance on return office visits

and to assess adjustments made. From Orthocare Innovations.

Specifications

Product Weight: 379g Build Height: 4.2” Patient Weight Limit: 300 lb Pylon Requirement: 30mm with 25.4mm ID Battery Life: 18 hours w/normal use Socket Compatibility: vacuum suspension

Description Item No.ò Edison Adaptive Suspension Pump (Includes Charger) ED1001

Edison Charger Replacement ED1002

Edison Filter Assembly Replacement ED1003

Edison USB Cable Replacement ED1004

Edison Barb Replacement ED1005

Edison is marketed under US Patent: 8,007,543 Orthocare Innovations, LLC. Other US and Foreign Patents Pending.

US Patents: 7,914,586; 7,947,085; 8,016,892. Under License From Ohio Willow Wood Company.



PR

OS

TH

ET

ICS

PROXIMAL SUSPENSION SYSTEMS

a. Summit™ Lock

The original Summit Lock™ was the first proximal lock designed to control rotation and the only lock with

ZERO clearance required. Coyote Design has improved the original and created the LowPro Summit Lock™

for easier donning. Both locks are designed specifically for long limbs. There is no need to purchase a locking

liner and you can use the socket adaptor of your choice. Summit Lock™ can be used for any activity level,

above or below the knee, for anyone up to 265 lbs. Sold each. From Coyote Design.


Summit™ Lock CD101

LowPro Summit™ Lock (pictured) CD102

Summit™ Lock with Manta Attachment CD101M

LowPro Summit™ Lock with Manta Attachment CD102M

CD101XT Extra Tab Kit

CD101XTM Extra Tab Kit with Manta Attachment

CD4120 Quick Adhesive

b. KISS™ Kits

KISS’s unique pinless suspension system anchors the limb using straps mounted distally and proximally to

any roll-on locking liner. The distal strap feeds through a base component in the socket and secures to the

proximal strap in a pulley-type action. Infinitely customizable, the KISS system virtually eliminates pistoning

and rotation, increases hip tracking throughout the gait cycle and has an ultra low profile 3mm build height.

See page 543 for pediatric size kits.

4-Hole Endo KISS™ Kit

Features an aluminum 4-hole distal base, which also serves as an attachment base for endoskeletal com-

ponentry. It also easily retrofits with PDI™ and Bulldog™ shuttle locks. Includes aluminum tab to assist in

fabrication. Lamination adapter and spacer screws sold separately. Designed for a single socket, 2-liner ap-

plication. Includes parts listed separately.

Item No. ð KS2/A

CMP2/A 4-Hole Endo Distal Base CMP22/A Velro Placard Set

CMP5/A Adhesive Placard Set CMP4/A Prox Nut/Screw Set

CMP6/A Distal Strap Set CMP8/A Distal Screw Set

CMP7/A Proximal Strap Set CMP9/A Muffler Set

Delrin® KISS™ Kit

Features a Delrin® distal base which can be laminated into a socket, or vacuum formed in a flexible inner

socket. Includes aluminum tab to assist in fabrication. Designed for a single socket, 2-liner application. In-

cludes parts listed separately.

Item No. ð KS1/A

CMP1/A Delrin Distal Base CMP22/A Velro Placard Set

CMP5/A Adhesive Placard Set CMP4/A Prox Nut/Screw Set

CMP6/A Distal Strap Set CMP8/A Distal Screw Set

CMP7/A Proximal Strap Set CMP9/A Muffler Set

KS2/A

KS1/A



PR

OS

TH

ET

ICS

c. KISS® Replacement Kits

Includes one each: Distal Strap, Proximal Strap, Placard, Distal Screw and Proximal Nut and Screw.

Strap and Placard Color Beige Black

Replacement Kit with Adhesive Placard CMP31/A CMP31/B

Replacement Kit with Velcro™ Sewn Placard CMP32/A CMP32B

d. Adhesive Fabrication Kit

This Fabrication Kit includes components needed to attach a KISS® placard using adhesive. This is not needed

for attaching by Velcro™. Contains 20+ applications.

Item No. ð FN1/A

CMP10/A Press Plates

CMP11/A KISS® Adhesive

REMOVABLE MEDIAL BRIM

e. RMB Bar Channel Assembly

For supracondylar suspension. Includes pull strap with screw and washer, ball retainer, Teflon® coated bar,

channel, lamination block, ball and gauze. From Fillauer.

Description Standard Heavy Duty

Item No. ð 127001 127019

127100 Bar Vise Clamp



PR

OS

TH

ET

ICS

3-S

a. Lamination Post


Description Small Small AK/BK AK/BK Low Profile Low Profile Flexible Rigid Flexible Rigid Flexible Rigid

Item No. ð 125272 125274 125256 125242 125259 125276

880683 Replacement Truss Head Screw

b. D-Bolt


Size 3/4” 1”

Item No. ð 125254 125247

c. Retaining Pin


Item No. ð 125266

d. Silicone Fitting Gel

1 lb. From Fillauer.

Item No. ð 741214

e. 3S Silicone

9 parts A to 1 part B. Part A Quart pictured. From Fillauer.

Component A (Gallon) A (Quart) B (Pint)

Item No. ð 741280 741222 741284

P R O S T H E T I C S Knitted Goods 7 6 5


PR

OS

TH

ET

ICS

STUMP SHRINKERS

f. X-Silver AK Stump Shrinker

The X-Silver AK Shrinker incorporates X-Static®—The Silver Fiber™ for proven anti-microbial protection.

Adjustable waist fits 32-50”. Outstanding stretch with gradient compression ensures a perfect fit every time.

Also available in standard fabric. Sold each. From Comfort Products.

Size Guide

Size Small Medium Med/Large Large X-Large

Seam Color Gold Red Black Blue Green

Top Circumference 15.75” 17.5” 19” 20.5” 22”

Toe Circumference1 13.5” 14.75” 16” 17.5” 19.5”

1 Circumference measured 2” from distal end.

X-Silver AK Stump Shrinker

Size Small Medium Med/Lg Large X-Large

8” Length SSX8SAK SSX8MAK SSX8MLAK SSX8LAK SSX8XLAK



Standard AK Stump Shrinker

Size Small Medium Med/Lg Large X-Large

8” Length SS8SAK SS8MAK SS8MLAK SS8LAK SS8LAK



g. X-Silver BK Stump Shrinker

The X-Silver BK Shrinker incorporates X-Static®—The Silver Fiber™ for proven anti-microbial protection.

Outstanding stretch with gradient compression ensures a perfect fit every time. The top can easily be rolled

over the fingers to allow for donning with limited hand strength. Also available in standard fabric. Sold each.

From Comfort Products.

Size Guide

Size Small Medium Large X-Large Black

Seam Color Gold Red Blue Green XX-Large

Top Circumference 10-12.25” 12.25-14.5” 14.25-17.25” 17.25-20.5” 20.5-24.5”

Toe Circumference1 6-7.5” 7.5-8.5” 8.5-9.75” 9.75-11.5” 11.5-13.5”

1 Circumference measured 2” from distal end.

X-Silver BK Shrinker


9” Length SSX9S SSX9M SSX9L SSX9XL SSX9XXL



Standard BK Shrinker


9” Length SS9S SS9M SS9L SS9L SS9L




P R O S T H E T I C S7 6 6 Knitted Goods

PR

OS

TH

ET

ICS

STUMP SHRINKERS — Continued

a. Juzo Stump Shrinker

Juzo compression garments provide two-way stretch elasticity, maximizing wearing comfort and allowing

the garment to move with the wearer throughout the day. Latex free and produced using the highest qual-

ity Lycra® fibers, Juzo stump shrinkers are available in Varin Soft-In or Silver with 17% X-Static®—The Silver

Fiber™ with anti-microbial and thermodynamic properties. Sold each. From Juzo.

AK Size Guide

Size I (XS) II (S) III (M) IV (L) V (XL) VI (XXL)

(G) Top of Thigh 44cm 48cm 52cm 56cm 60cm 64cm

(F) Mid-Thigh 41cm 44cm 47cm 50cm 53cm 56cm

(E) Mid-Patella 31cm 34cm 37cm 40cm 43cm 46cm

BK Size Guide

Size XXS I (XS) II (S) III (M) IV (L) V (XL) VI (XXL)

(F) Mid-Thigh 38cm 41cm 44cm 47cm 50cm 53cm 56cm

(E) Mid-Patella 28cm 31cm 34cm 37cm 40cm 43cm 46cm

(C) Calf 26cm 29cm 32cm 35cm 38cm 41cm 46cm

Complete the Item Number below by choosing from options beneath t. (Example: 3511FGMHA II)

Item No. ð (Type) (Compression) (Style) (Length) (Option) (Size)

Type t Compression t Style t Length t Option t Size t

Varin Soft-In 351 20-30 mmHg 1 AK FG 14”(1) E None XXS(2) XXS Silver 356 30-40 mmHg 2 BK CF 12”(1) L Hip Attachment HA XS I 10”(1) M Body Part BP S II 8”(1) S Silicone Border SB M III 18”(2) L L IV 15”(2) M XL V 12”(2) S XXL VI

(1) AK only. (2) BK only.

b. Juzo Syme’s Shrinker

Available in two compressions in Varin Soft-In fabric. Sold each. From Juzo.


20-30 mmHg 3511HD I 3511HD II 3511HD III 3511HD IV 3511HD V

30-40 mmHg 3512HD I 3512HD II 3512HD III 3512HD IV 3512HD V

c. Compressogrip® AK Shrinker

Features a circular knit with increased power in the elastic producing a heavier fabric than that used for the

Compressogrip BK shrinker. Multi-directional stretch for improved fitting and a universal waist belt. Standard

white, or with X-Static®—The Silver Fiber™. 25-30 mmHg compression at 50% stretch. Sold each. From Knit-Rite.

Size XS SM MD LG

Flat Width 5” 6” 7.5” 9”

Fits Circumference 12-17” 15-20” 18-24” 24-32”

White 2H0S05XS 2H0S06SM 2H0SS7MD 2H0S09LG

White with Gusset N/A N/A 2HGSS7MD 2HGS09LG

Silver 2H0X05XS 2H0X06SM 2H0XS7MD 2H0X09LG



PR

OS

TH

ET

ICS

d. Compressogrip® BK Elastic Shrinker

Tubular compression material used for control or prevention of edema following amputation surgery, for limb

volumetric maintenance, to minimize hypertrophic scarring and to give compressive support for pain relief.

20-25 mmHg compression at 50% stretch. At 100% stretch the compression is doubled. Double layers will

double compression at both 50% and 100% stretch. Application of more than two layers may exceed the limits

of desired therapeutic pressure. 92% polyester, 8% spandex. Latex-free. Washable. Sold each. From Knit-Rite.

Size 2 2.5 3 3.5 4 5 6

Fits Circumf 5-7” 7-10” 9-12” 10-13” 12-16” 15-20” 18-24”

White

18” Length 2H0S0218 2H0S0S18 2H0S0318 2H0SS318 2H0S0418 2H0S0518 2H0S0618

24” Length 2H0S0224 2H0S0S24 2H0S0324 2H0SS324 2H0S0424 2H0S0524 2H0S0624

30” Length N/A N/A 2H0S0330 N/A 2H0S0430 2H0S0530 2H0S0630

Beige

18” Length 2H0B0218 2H0B0S18 2H0B0318 2H0BS318 2H0B0418 2H0B0518 2H0B0618

24” Length 2H0B0224 2H0B0S24 2H0B0324 2H0BS324 2H0B0424 2H0B0524 2H0B0624

30” Length N/A N/A 2H0B0330 N/A 2H0B0430 2H0B0530 2H0B0630

e. Compressogrip® BK Shrinker with X-Static®

All the benefits of Knit-Rite’s original Compressogrip Shrinker, plus the anti-microbial and thermodynamic

properties of X-Static®—The Silver Fiber™. 88% polyester, 8% spandex, 4% X-Static®. Latex-free. Washable.


Size 2 2.5 3 3.5 4 5 6

Fits Circumf 5-7” 7-10” 9-12” 10-13” 12-16” 15-20” 18-24”

18” Length 2H0X0218 2H0X0S18 2H0X0318 N/A 2H0X0418 2H0X0518 N/A

24” Length 2H0X0324 N/A 2H0X0424 2H0X0524 2H0X0624

30” Length N/A 2H0XS330 2H0X0430 2H0X0530 2H0X0630

f. Post-Op Dressing Retention Sock with Belt

Designed on the model of the popular Compressogrip AK Shrinker, the Post-Op Dressing Retention Sock with

Belt utilizes a very soft, compressive fit, with a belt suspension to cover and retain postoperative dressings of

transfemoral amputees. It features a soft Lycra® and Coolmax® body for very low compression and universal

right or left belt system to maintain secure suspension. Can be used for AK or BK. Does not irritate or stress

sutures during donning. Does not compromise peripheral circulation in marginal bypass vascular grafts. Can

be used in combination with removable rigid dressings. Sold each. From Knit-Rite.


Item No. ð 1RP10428 1RP10632 1RP10832



PR

OS

TH

ET

ICS


a. 3-Dimensional AK Shrinker

Easy to adjust, hook and pile side opening waist band, adaptable for left or right. Tapered design for gradient

pressure. Two compressions. Garment length from groin to distal end should be one to two inches shorter

than actual measurement so that proper snugging of distal end will not result in roll at groin. Sold each.

From Knit-Rite.

Flat Width Flat Width Fits Circumf Fits Circumf Length Heavy Medium Top Toe Top Toe Groin to Distal 60-65 mmHg 30-35 mmHg

6” 4” 15-17” 12-14.5” 7” 2HPH6407 2HPM6407 10” 2HPH6410 2HPM6410 13” 2HPH6413 2HPM6413

7” 4” 17.5-20.5” 12-14.5” 7” 2HPH7407 2HPM7407 10” 2HPH7410 2HPM7410 13” 2HPH7413 2HPM7413





8” 6” 21-23” 18-22” 7” 2HPH8607 2HPM8607 10” 2HPH8610 2HPM8610 13” 2HPH8613 2HPM8613

9” 6” 23.5-25.5” 18-22” 7” 2HPH9607 2HPM9607 10” 2HPH9610 2HPM9610 13” 2HPH9613 2HPM9613

10” 6” 26-29” 18-22” 7” 2HPH0607 2HPM0607 10” 2HPH0610 2HPM0610 13” N/A 2HPM0613

b. Knit-Rite BK Shrinker, Regular Taper

Made from rayon/Lycra® core yarn. Soft, comfortable and easy to put on. Two compressions: heavy (green

top) and medium (gray top). Machine washable. Sold each.

Compression 55-60 mmHg 55-60 mmHg 55-60 mmHg 25-30 mmHg 25-30 mmHg 25-30 mmHg

Width Narrow Medium Wide Narrow Medium Wide

Flat Top 5” 6” 7” 5” 6” 7”

Flat Toe 3” 4” 5” 3” 4” 5”

Top Circumf 13-14” 15-17” 18-20” 13-14” 15-17” 18-20”

Toe Circumf 9-11” 12-14” 15-17” 9-11” 12-14” 15-17”

10” Length 2HPHRN10 2HPHRM10 2HPHRW10 2HPMRN10 2HPMRM10 2HPMRW10





PR

OS

TH

ET

ICS

c. Knit-Rite BK Shrinker, Double Taper

Made from rayon/Lycra® core yarn. Soft, comfortable and easy to put on. Two compressions: heavy (green

top) and medium (gray top). Gradual taper distally, flaring to a wide top. Machine washable. Sold each.

Compression 55-60 mmHg 55-60 mmHg 55-60 mmHg 25-30 mmHg 25-30 mmHg 25-30 mmHg

Width Narrow Medium Wide Narrow Medium Wide

Flat Top 5” 7” 8” 5” 7” 8”

Flat Mid 3.5” 4.5” 5.5” 3.5” 4.5” 5.5”

Flat Toe 3” 4” 5” 3” 4” 5”

Top Circumf 15-17” 18-20” 21-24” 15-17” 18-20” 21-24”

Toe Circumf 9-11” 12-14” 15-17” 9-11” 12-14” 15-17”

10” Length 2HPHDN10 2HPHDM10 2HPHDW10 2HPMDN10 2HPMDM10 2HPMDW10



d. medi AK Shinker

Features include soft, smooth material for all day wearing comfort. ClimaComfort rapidly wicks moisture from

skin. ClimaFresh prevents bacterial colonization within the fabric. Movable waistbelt Sold each. From Medi USA.

Proximal Circumference 44cm 48cm 52cm 56cm 60cm 64cm

Size Length 1 2 3 4 5 6

20-30 mmHg

Short 8” AK1S0W1 AK1S0W2 AK1S0W3 AK1S0W4 AK1S0W5 AK1S0W6

Medium 10” AK1M0W1 AK1M0W2 AK1M0W3 AK1M0W4 AK1M0W5 AK1M0W6

Long 12” AK1L0W1 AK1L0W2 AK1L0W3 AK1L0W4 AK1L0W5 AK1L0W6

X-Long 14” AK1X0W1 AK1X0W2 AK1X0W3 AK1X0W4 AK1X0W5 AK1X0W6

30-40 mmHg

Short 8” AK2S0W1 AK2S0W2 AK2S0W3 AK2S0W4 AK2S0W5 AK2S0W6

Medium 10” AK2M0W1 AK2M0W2 AK2M0W3 AK2M0W4 AK2M0W5 AK2M0W6

Long 12” AK2L0W1 AK2L0W2 AK2L0W3 AK2L0W4 AK2L0W5 AK2L0W6

X-Long 14” AK2X0W1 AK2X0W2 AK2X0W3 AK2X0W4 AK2X0W5 AK2X0W6

e. medi BK Shinker

Features include soft, smooth material for all day wearing comfort. ClimaComfort rapidly wicks moisture from

skin. ClimaFresh prevents bacterial colonization within the fabric. Silicone beaded BK topband for superior

suspension. From Medi USA.

Proximal Circumf 38cm 41cm 44cm 47cm 50cm 53cm 56cm

Size Length 0 1 2 3 4 5 6

20-30 mmHg

Short 12” BK1S0N0 BK1S0N1 BK1S0N2 BK1S0N3 BK1S0N4 BK1S0N5 BK1S0N6

Medium 15” BK1M0N0 BK1M0N1 BK1M0N2 BK1M0N3 BK1M0N4 BK1M0N5 BK1M0N6

Long 18” BK1L0N0 BK1L0N1 BK1L0N2 BK1L0N3 BK1L0N4 BK1L0N5 BK1L0N6

30-40 mmHg

Short 12” BK2S0N0 BK2S0N1 BK2S0N2 BK2S0N3 BK2S0N4 BK2S0N5 BK2S0N6

Medium 15” BK2M0N0 BK2M0N1 BK2M0N2 BK2M0N3 BK2M0N4 BK2M0N5 BK2M0N6

Long 18” BK2L0N0 BK2L0N1 BK2L0N2 BK2L0N3 BK2L0N4 BK2L0N5 BK2L0N6



PR

OS

TH

ET

ICS


a. Tensitube Blue Shrinker

Unlike other shrinkers on the market, the compression of the Tensitube Blue Shrinker is consistent between

sizes. Available in white, beige and silver fabrics. Silver style is naturally antimicrobial and moisture wicking.

Also available in 11 yard roll. Shrinker sold each. From RX Textiles.

Fits Circumference 5-7” 9-12” 12-16” 15-20” 18-24” (12.5-17.5cm) (22.5-30cm) (30-40cm) (38-50cm) (45-60cm)

White

18” Length 0100100 0100700 0101000 0101300 0101600

24” Length 0100200 0100800 0101100 0101400 0101700

30” Length N/A 0100900 0101200 0101500 0101800

Beige

18” Length 0140140 0140700 0141000 0141300 0141600

24” Length 0140200 0140800 0141100 0141400 0141700

30” Length N/A 0140900 0141200 0141500 0141800

Silver

18” Length 0150150 0150700 0151000 0151300 0151600

24” Length 0150200 0150800 0151100 0151400 0151700

30” Length N/A 0150900 0151200 0151500 0151800

b. 831-AK Stump Shrinker

One-piece surgical weight elastic construction with one-way stretch. Contoured at groin with padded draw-

string bottom. Adjustable elastic waist band with hook and pile closure. Sold each. From Truform.


Thigh Circumference 13-16” 16-19” 19-22” 22-25”

6” Length 0831-AK6-S 0831-AK6-M 0831-AK6-L 0831-AK6-XL






c. 833-BK Stump Shrinker

One-way stretch surgical elastic with padded distal end. Sold each. From Truform.


Calf Circumf 9-11” 11-13” 13-15” 15-17” 17-19”

6” Length 0833-BK6-XS 0833-BK6-S 0833-BK6-M 0833-BK6-L 0833-BK6-XL







PR

OS

TH

ET

ICS

d. 836-BK Stump Shrinker with Silicone Band

Medium weight nylon/spandex construction with two-way stretch. Features silicone proximal band. Beige.

Sold each. From Truform.


Knee Circumf to 12.25” to 13.5” to 14.5” to 15.75” to 17”





Also available in size 2X (to 18” knee circumference).

e. 837-AK Stump Shrinker with Expansion Gusset

One-piece surgical weight elastic construction with one-way stretch. Contoured at groin with padded draw-

string bottom. Adjustable elastic waist band with hook and pile closure. Slightly tapered expansion gusset

prevents irritation over the inner thigh near the groin area. Sold each. From Truform.








f. 839-AK Stump Shrinker

One-piece medium weight spandex elastic construction with two-way stretch. Hook and pile closure. Wide

contour cut around groin for added comfort. 35 mmHg compression. Beige. Sold each. From Truform.







Also available in size 2X (25-28” thigh circumference).

g. 839-BK Stump Shrinker

Medium weight spandex construction with two-way stretch. Beige. Sold each. From Truform.


Knee Circumf to 12.25” to 13.5” to 14.5” to 15.75” to 17”





Also available in size 2X (to 18” knee circumference).



PR

OS

TH

ET

ICS

SHEATHS

a. ProActive Wear® Interface Sheath

For auxiliary suspension to help create a snug, comfortable fit to the silicone liner. Pre-shrunk 95% cotton,

5% Lycra®. Finished cuff at top prevents roll down. Distal hole accommodates pin type attachment. Hand or

machine washable, no bleach. Tumble dry. Sold each.

Size Length Stretch Width Max Max Item No.ò Length Top Bottom

Above Knee 15” 36” 4” 15” 10” IRSS-AK-2

Below Knee 12” 29” 4” 12” 10” IRSS-BK-2

b. Fitting Sheath

Knitted cotton for a snug, comfortable fit. Able to stretch 50% more at the top of the sheath than it does at the

bottom. Fashioned hole in bottom to accommodate pin type attachment systems. Finished cuff top to prevent

roll down. 50% cotton, 50% polyester. Pre-shrunk. Machine washable . Tumble dry. Sold each. From ALPS.

Size Length Length Width W Top W Bottom Item No.ò Relaxed Stretched Relaxed Stretched Stretched

S/M 17” 30” 4” 12” 10” FS-495 S/M

L/XL 16” 26” 6” 15” 11” FS-495 L/XL

c. Comfort Products Prosthetic Sheath

Features include reinforced toe for greater wear resistance, open mesh design that stretches to conform

to shape while allowing for ventilation and turned welt construction to provide strength where it is most

needed. Sold each.

Size AK Med BK Short BK Med BK Long

Length 16-20” 10-14” 16-20” 22-26”

Standard SHA SHS SHM SHL

with Distal Hole SHA3 SHS3 SHM3 SHL3

d. Silver Liner Sheath

Same as above but with X-Static®—The Silver Fiber™. X-Static® yarn has a pure layer of silver incorporated

into the surface of the fiber. X-Static® eliminates odor causing bacteria, keeps the wearer cooler in summer

and warmer in winter, and is anti-static. Sold each. From Comfort Products.

Size AK Med BK XX-Short BK X-Short BK Short BK Med BK Long

Length 14-18” 6-8” 8-10” 10-12” 14-18” 20-24”

Standard Silver XSHA XSHXXS XSHXS XSHS XSHM XSHL

w/Distal Hole XSHA3 XSHXXS3 XSHXS3 XSHS3 XSHM3 XSHL3



PR

OS

TH

ET

ICS

e. AK Brim Sheath

For above knee patients, for all socket styles. Designed to separate and protect the soft tissue in the top brim

of the socket. Used to bridge the gap between the top edge of any roll on liner and the groin. Will work on

pin suspension and seal in liners.

Brim sheath uses stretchy, slick nylon material, constructed in two angled sections to allow the fabric design

to fit the high lateral and lower medial shape appropriately. Includes gripper elastic to secure to outer socket.

Three sizes. Black. Sold each. From Knit-Rite.

Sie Small Medium Large

Item No. ð 2HBSAKSM 2HBSAKMD 2HBSAKLG

f. Knit-Rite Prosthetic Sheath

100% stretch nylon. Sized to socks. Dusk or white. 3 pair per box. From Knit-Rite. See page 548 for child sizes.

Size Sock Size Length Dusk White

Narrow Short B, 0, 1 10-14” 2HPBNASH 2HPWNASH

Narrow Medium B, 0, 1 16-20” 2HPBNAMD 2HPWNAMD

Narrow Long B, 0, 1 22-28” 2HPBNALG 2HPWNALG

Regular X-Short 1, 2 8-10” 2HPBRGXS 2HPWRGXS

Regular Short 1, 2 10-14” 2HPBRGSH 2HPWRGSH

Regular Medium 1, 2 16-20” 2HPBRGMD 2HPWRGMD

Regular Long 1, 2 22-28” 2HPBRGLG 2HPWRGLG

Wide Short 3+ 10-14” 2HPBWDSH 2HPWWDSH

Wide Medium 3+ 16-20” 2HPBWDMD 2HPWWDMD

Wide Long 3+ 22-28” 2HPBWDLG 2HPWWDLG

g. Knit-Rite Silver Sheath

91% nylon, 9% X-Static®—The Silver Fiber™. Features antimicrobial and moisture wicking properties. Sold 3

pair per box. From Knit-Rite.

Size Narrow Narrow Regular Regular Regular Wide X-Short Short X-Short Short Medium Short

Sock Size B, 0, 1 B, 0, 1 1, 2, 1, 2 1, 2 3+

Length 8-10” 10-14” 8-10” 10-14” 16-20” 10-14”

Item No. ð 2HPXNAXS 2HPXNASH 2HPXRGXS 2HPXRGSH 2HPXRGMD 2HPXWDSH

h. Knit-Rite Super Stretch Sheath

For friction and volume control. 98% nylon, 2% Lycra®. Dusk or white. 3 pair per box. From Knit-Rite.


Regular Short 1, 2 10-14” 2HPSBRSH 2HPSWRSH

Regular Medium 1, 2 16-20” 2HPSBRMD 2HPSWRMD



PR

OS

TH

ET

ICS

SHEATHS — Continued

a. Knit-Rite Hole-In-Toe Sheath

100% stretch nylon. Sold pair. From Knit-Rite.


Regular Short 1, 2 10-14” 2HPBRHSH 2HPWRHSH

Wide Short 3+ 10-14” 2HPBWHSH 2HPWWHSH

b. Liner-Liner®

Designed to be worn next to the skin under a suspension liner, the Liner-Liner® relieves skin shear irritations

and improves comfort with liner. Ultra-thin material minimizes compromise to liner’s suction grip on skin.

X-Static® silver fibers fight odor-causing bacteria and transport heat and moisture away from the skin. High

stretch for excellent fit. 5.8% Lycra® spandex, 94.2% polyester/X-Static®. Sold each. From Knit-Rite.

Size Narrow Narrow Regular Regular Wide Wide X-Short Short X-Short Short Short Medium

Fits Sock Size B, 0 B, 0 1,2 1,2 3 3

Length 8-12” 10-14” 8-12” 10-14” 10-14” 16-20”

Item No. ð 1SXLNAXS 1SXLNASH 1SXLRGXS 1SXLRGSH 1SXLWDSH 1SXLWDMD

c. Ultra Low Friction Sheath™ (ULFS)

Especially beneficial for difficult-to-fit limbs such as those with excess soft tissue or edema, bulbous distal

ends or other uniquely shaped limbs, and to aid in donning removable rigid dressings. Also helps to don

shrinkers because it reduces skin shear and tension on the suture line. Using the ULFS allows more socks to be

applied to the residual limb before donning, thus providing increased soft tissue compression. Double Layer

or Single Layer with Hole for use with locking liners. 100% nylon. Machine washable, no bleach. Tumble

dry. Sold each. From Knit-Rite.

Top Width 8” 10” 12” 14” 16” 18”

14” Double Layer 2HUL1408 2HUL1410 2HUL1412 2HUL1414 2HUL1416 N/A

21” Double Layer N/A 2HUL2110 2HUL2112 2HUL2114 2HUL2116 2HUL2118

14” Single Layer w/Hole 2HU11408 2HU11410 2HU11412 2HU11414 2HU11416 N/A

21” Single Layer w/Hole N/A 2HU12110 2HU12112 2HU12114 2HU12116 2HU12118

d. Relax Night Care Sock

The Night Care combines Umbrellan technology with the softness of Clima-Comfort in a textile weave for

nighttime relief. Wicks moisture away from the skin. Soft topband for a relaxed proximal fit. Sold each. From

Medi USA.


Item No. ð 1880322 1880323 1880324



PR

OS

TH

ET

ICS

e. Prosthetic Sheath

100% stretch nylon in white or flesh. Features reinforced toe and turned welt construction at top. Sold 3 per

box. From Truform.


White 0830-W-BKS 0830-W-BKKM 0830-W-BKL

Flesh 0830-F-BKS 0830-F-BKKM 0830-F-BKL

f. Sheath with Pocket Seam

Wicks perspiration away from the skin. Reduces friction between the limb and prosthesis. Eleven sizes in two

styles: Pocket Seam or Bottom Seam. 100% nylon. Machine wash and dry. Sold each. From Trulife.

Size Guide X-Narrow Narrow Regular Short

Top Width 4.5-5” 6-7” 8-9” 10-12” (11-13cm) (15-18cm) (20-23cm) (25-30cm)

Pocket Seam

Short Length (12-14”) 54011U02 54012U02 54013U02 54014U02

Regular Length (16-18”) N/A 54012U03 54013U03 DISCON

Long Length (20-24”) N/A 54012U04 54013U04 54014U04

X-Long Length (26-30”) N/A N/A 54013U05 N/A

Bottom Seam

Short Length (12-14”) 54021U02 54022U02 54023U02 54024U02

Regular Length (16-18”) N/A 54022U03 54023U03 54024U03

Long Length (20-24”) N/A 54022U04 54023U04 54024U04

X-Long Length (26-30”) N/A N/A 54023U05 N/A

FILLER, SPACER and FITTING SOCKS

g. BK Prosthetic Tube Sock

A 3-ply terry lined, all cotton tube sock. Breathable, reversible and an ideal sheath companion. May also be

used as a low cost prosthetic sock. Individually wrapped, six per package. From Comfort Products.

Size 12” Length 16” Length 22” Length 28” Length

Maximum Circumference 8-10” 10-14” 16-20” 20-26”

Standard CPT12 CPT16 CPT22 CPT28

with Distal Hole CPT123 CPT163 CPT223 CPT283



PR

OS

TH

ET

ICS

FILLER, SPACER and FITTING SOCKS — Continued

a. Knit-Rite Proximal Soft-Sock

A tapered, open-ended Soft Sock used to manage proximal volume changes. Polyester/Lycra®. Sold each.

Size Sock Size Lightweight 3 Ply 5 Ply

Regular Short 1, 2 1PS1RGSH 1PS3RGSH 1PS5RGSH

Regular Medium 1, 2 1PS1RGMD 1PS3RGMD 1PS5RGMD

Wide Medium 3+ 1PS1WDMD 1PS3WDMD 1PS5WDMD

X-Wide Medium 4+ 1PS1XWMD 1PS3XWMD 1PS5XWMD

b. Knit-Rite Spacer Sock

A single ply cotton/polyester sock with seam one inch above distal end. Rounded, reinforced toe for good fit

and long wear. Soft, comfortable and absorbent. Lightweight or heavy. Six per package.

Size Narrow Medium Wide X-Wide XX-Wide XX-Wide/Long

Sock Size B, ) 1, 2 3, 4 4, 5 5, 6 5, 6

Length 15” (38cm) 18” (45cm) 18” (45cm) 24” (60cm) 18” (45cm) 24” (60cm)

Lightweight 6S8035LT 6S8040LT 6S8045LT N/A N/A N/A

Heavy 6S8035HV 6S8040HV 6S8045HV 6S8050HV 6S8055HV 6S8060HV

c. Hole-In-Toe Spacer Sock

Features a reinforced distal hole for accommodating pin attachment. Heavy weight. Six per package. From

Knit-Rite.

Size Narrow Medium Wide

Sock Size B, 0 1, 2 3, 4

Length 15” (38cm) 18” (45cm) 18” (45cm)

Item No. ð 6SS035HV 6SS040HV 6SS045HV

d. Stretch Spacer Sock

Provides improved fit, range of motion and reduced migration. Soft, smooth cotton finish with a durable,

reciprocal seamed sheath-type toe. Medium single ply cotton/Lycra®. Two styles: turn down cuff with cot-

ton/Lycra® toe and straight top with nylon toe. Standard or Hole-In-Toe with reinforced distal hole. Six per

package. From Knit-Rite.

Turn Down Cuff with Cotton/Lycra® Toe

Size Narrow Short Med Short Wide Short

Sock Size A, B 0, 1 2, 3, 4

Unstretched Length 12” (30cm) 12” (30cm) 12” (30cm)

Standard 6S8S35SH 6S8S40SH 6S8S45WS

Hole-In-Toe 6SSS35SH 6SSS40SH 6SSS45WS

Straight Top with Nylon Toe

Size Narrow Medium Wide Wide

Sock Size A, B 0, 1 2, 3, 4 2, 3, 4

Unstretched Length 12” (30cm) 15” (38cm) 12” (30cm) 18” (45cm)

Standard 6S8S35MD 6S8S40MD 6S8S45SH 6S8S45MD

Hole-In-Toe 6SSS35MD 6SSS40MD 6SSS45SH 6SSS45MD



PR

OS

TH

ET

ICS

e. TuffToe™

A cotton/Lycra® elastic fitting sock specifically designed for use with a locking device pin. Features a super

tough 100% nylon reinforced toe and the addition of a tightly sewn circular hole at the distal end. Special

thread used to sew the hole further strengthens the opening. Finally, a gel is applied to the hole making the

TuffToe™ virtually indestructible. Six per package. From RX Textiles.

Ply 1 Ply 2 Ply 4 Ply

Above Knee, 14” Length 3000460 3000560 3000660

Below Knee, 10” Length 3000160 3000260 3000360

f. Elastic Fitting Sock

A one-ply fitting sock that combines cotton/Lycra® and polypropylene yarns for optimum softness, stretch

and comfort while wicking moisture away from skin. 50% more stretch at the top than bottom allows for

better tapering. Machine wash, tumble dry. Sold each. From RX Textiles.

Size AK BK

Item No. ð EFS-L/XL EFS-S/M

PROSTHETIC FOOT SOCKS

g. Spectra® Sock

The Spectra Sock was designed for use with carbon feet. The sock helps to protect the foot from dust and dirt

while eliminating the common noises caused by the foot moving inside the foot shell. Additionally, Spectra®

Sock helps protect the foot shell from excess wear caused by the carbon rubbing against the foot shell. Sold

each. From Comfort Products.

Item No. ð SPS

h. Trulife Spectra Sock


Item No. ð 28584-001

i. High Activity Spectra Sock

Available separately. From WillowWood.

Item No. ð 700-SS001



PR

OS

TH

ET

ICS

PROSTHETIC SOCKS

a. Comfort Regal™

The Regal™ sock features an acrylic/Lycra® blend which stretches to conform to the residual limb, while

moisture wicking properties keep wearer dry and comfortable. Fleeced interior. Rounded toe prevents distal

bunching. Machine wash and dry. Sold each. From Comfort Products.

Size Guide Narrow Medium Wide X-Wide (NA) (MD) (WD) (XW)

Sock Size 00, 0, A0, A1 1, 2 3, 4 5, 6

Top 4-6” 7-8” 9-10” 10-12”

Toe 3-3.5” 4-5” 5.5-6” 7-8”

Length Guide X-Short Short Mid Regular Long X-Long XX-Long (XS) (SH) (PERF) (RG) (LG) (XL) (XXL)

Length 8-10” 10-12” 12-14” 14-16” 18-20” 22-24” 26-28”

Item Numbers

Size/Length 2 Ply 3 Ply 4 Ply 5 Ply 6 Ply 7 Ply

Narrow/X-Short PSRNAXS2 PSRNAXS3 PSRNAXS4 PSRNAXS5 PSRNAXS6 PSRNAXS7

Narrow/Short PSRNASH2 PSRNASH3 PSRNASH4 PSRNASH5 PSRNASH6 PSRNASH7

Narrow/Mid PSRNAPERF2 PSRNAPERF3 PSRNAPERF4 PSRNAPERF5 PSRNAPERF6 PSRNAPERF7

Narrow/Regular PSRNARG2 PSRNARG3 PSRNARG4 PSRNARG5 PSRNARG6 PSRNARG7

Narrow/Long PSRNALG2 PSRNALG3 PSRNALG4 PSRNALG5 PSRNALG6 PSRNALG7

Narrow/X-Long PSRNAXL2 PSRNAXL3 PSRNAXL4 PSRNAXL5 PSRNAXL6 PSRNAXL7

Narrow/XX-Long PSRNAXXL2 PSRNAXXL3 PSRNAXXL4 PSRNAXXL5 PSRNAXXL6 PSRNAXXL7

Medium/X-Short PSRMDXS2 PSRMDXS3 PSRMDXS4 PSRMDXS5 PSRMDXS6 PSRMDXS7

Medium/Short PSRMDSH2 PSRMDSH3 PSRMDSH4 PSRMDSH5 PSRMDSH6 PSRMDSH7

Medium/Mid PSRMDPERF2 PSRMDPERF3 PSRMDPERF4 PSRMDPERF5 PSRMDPERF6 PSRMDPERF7

Medium/Regular PSRMDRG2 PSRMDRG3 PSRMDRG4 PSRMDRG5 PSRMDRG6 PSRMDRG7

Medium/Long PSRMDLG2 PSRMDLG3 PSRMDLG4 PSRMDLG5 PSRMDLG6 PSRMDLG7

Medium/X-Long PSRMDXL2 PSRMDXL3 PSRMDXL4 PSRMDXL5 PSRMDXL6 PSRMDXL7

Med/XX-Long PSRMDXXL2 PSRMDXXL3 PSRMDXXL4 PSRMDXXL5 PSRMDXXL6 PSRMDXXL7

Wide/X-Short PSRWDXS2 PSRWDXS3 PSRWDXS4 PSRWDXS5 PSRWDXS6 PSRWDXS7

Wide/Short PSRWDSH2 PSRWDSH3 PSRWDSH4 PSRWDSH5 PSRWDSH6 PSRWDSH7

Wide/Mid PSRWDPERF2 PSRWDPERF3 PSRWDPERF4 PSRWDPERF5 PSRWDPERF6 PSRWDPERF7

Wide/Regular PSRWDRG2 PSRWDRG3 PSRWDRG4 PSRWDRG5 PSRWDRG6 PSRWDRG7

Wide/Long PSRWDLG2 PSRWDLG3 PSRWDRLG4 PSRWDLG5 PSRWDLG6 PSRWDLG7

Wide/X-Long PSRWDXL2 PSRWDXL3 PSRWDXL4 PSRWDXL5 PSRWDXL6 PSRWDXL7

Wide/XX-Long PSRWDXXL2 PSRWDXXL3 PSRWDXXL4 PSRWDXXL5 PSRWDXXL6 PSRWDXXL7

X-Wide/X-Short PSRXWDXS2 PSRXWDXS3 PSRXWDXS4 PSRXWDXS5 PSRXWDXS6 PSRXWDXS7

X-Wide/Short PSRXWDSH2 PSRXWDSH3 PSRXWDSH4 PSRXWDSH5 PSRXWDSH6 PSRXWDSH7

X-Wide/Mid PSRXWDPERF2 PSRXWDPERF3 PSRXWDPERF4 PSRXWDPERF5 PSRXWDPERF6 PSRXWDPERF7

X-Wide/Regular PSRXWDRG2 PSRXWDRG3 PSRXWDRG4 PSRXWDRG5 PSRXWDRG6 PSRXWDRG7

X-Wide/Long PSRXWDLG2 PSRXWDLG3 PSRXWDLG4 PSRXWDLG5 PSRXWDLG6 PSRXWDLG7

X-Wide/X-Long PSRXWDXL2 PSRXWDXL3 PSRXWDXL4 PSRXWDXL5 PSRXWDXL6 PSRXWDXL7

X-Wide/XX-Long PSRXWDXXL2 PSRXWDXXL3 PSRXWDXXL4 PSRXWDXXL5 PSRXWDXXL6 PSRXWDXXL7

Item numbers in bold face are manufacturer stock items. Add 3 to the end of item number for a vulcanized distal hole.

Add 3K to the end of item number for knitted distal hole.



PR

OS

TH

ET

ICS

b. Comfort Ag™

The Comfort Ag™ sock is made using CoolMax® fabric plaited with X-Static®—The Silver Fiber™. The CoolMax®

wicks moisture away from the skin to help keep the wearer dry and comfortable. The anti-microbial proper-

ties of silver eliminate odor-causing bacteria and fungi. Fleeced interior. Sold each. From Comfort Products.

Size Guide Narrow Medium Wide X-Wide (NA) (MD) (WD) (XW)

Sock Size 00, 0, A0, A1 1, 2 3, 4 5, 6

Top 4-6” 7-8” 9-10” 10-12”

Toe 3-3.5” 4-5” 5.5-6” 7-8”

Length Guide X-Short Short Mid Regular Long X-Long XX-Long (XS) (SH) (PERF) (RG) (LG) (XL) (XXL)

Length 8-10” 10-12” 12-14” 14-16” 18-20” 22-24” 26-28”

Item Numbers

Size/Length 3 Ply 4 Ply 5 Ply 6 Ply 7 Ply

Narrow/X-Short PSRAGNAXS3 PSRAGNAXS4 PSRAGNAXS5 PSRAGNAXS6 PSRAGNAXS7

Narrow/Short PSRAGNASH3 PSRAGNASH4 PSRAGNASH5 PSRAGNASH6 PSRAGNASH7

Narrow/Mid PSRAGNAPERF3 PSRAGNAPERF4 PSRAGNAPERF5 PSRAGNAPERF6 PSRAGNAPERF7

Narrow/Reg PSRAGNARG3 PSRAGNARG4 PSRAGNARG5 PSRAGNARG6 PSRAGNARG7

Narrow/Long PSRAGNALG3 PSRAGNALG4 PSRAGNALG5 PSRAGNALG6 PSRAGNALG7

Narrow/X-Long PSRAGNAXL3 PSRAGNAXL4 PSRAGNAXL5 PSRAGNAXL6 PSRAGNAXL7

Narrow/XXL PSRAGNAXXL3 PSRAGNAXXL4 PSRAGNAXXL5 PSRAGNAXXL6 PSRAGNAXXL7

Med/X-Short PSRAGMDXS3 PSRAGMDXS4 PSRAGMDXS5 PSRAGMDXS6 PSRAGMDXS7

Med/Short PSRAGMDSH3 PSRAGMDSH4 PSRAGMDSH5 PSRAGMDSH6 PSRAGMDSH7

Med/Mid PSRAGMDPERF3 PSRAGMDPERF4 PSRAGMDPERF5 PSRAGMDPERF6 PSRAGMDPERF7

Med/Reg PSRAGMDRG3 PSRAGMDRG4 PSRAGMDRG5 PSRAGMDRG6 PSRAGMDRG7

Med/Long PSRAGMDLG3 PSRAGMDLG4 PSRAGMDLG5 PSRAGMDLG6 PSRAGMDLG7

Med/X-Long PSRAGMDXL3 PSRAGMDXL4 PSRAGMDXL5 PSRAGMDXL6 PSRAGMDXL7

Med/XXL PSRAGMDXXL3 PSRAGMDXXL4 PSRAGMDXXL5 PSRAGMDXXL6 PSRAGMDXXL7

Wide/X-Short PSRAGWDXS3 PSRAGWDXS4 PSRAGWDXS5 PSRAGWDXS6 PSRAGWDXS7

Wide/Short PSRAGWDSH3 PSRAGWDSH4 PSRAGWDSH5 PSRAGWDSH6 PSRAGWDSH7

Wide/Mid PSRAGWDPERF3 PSRAGWDPERF4 PSRAGWDPERF5 PSRAGWDPERF6 PSRAGWDPERF7

Wide/Regular PSRAGWDRG3 PSRAGWDRG4 PSRAGWDRG5 PSRAGWDRG6 PSRAGWDRG7

Wide/Long PSRAGWDLG3 PSRAGWDRLG4 PSRAGWDLG5 PSRAGWDLG6 PSRAGWDLG7

Wide/X-Long PSRAGWDXL3 PSRAGWDXL4 PSRAGWDXL5 PSRAGWDXL6 PSRAGWDXL7

Wide/XX-Long PSRAGWDXXL3 PSRAGWDXXL4 PSRAGWDXXL5 PSRAGWDXXL6 PSRAGWDXXL7

X-Wide/X-Short PSRAGXWDXS3 PSRAGXWDXS4 PSRAGXWDXS5 PSRAGXWDXS6 PSRAGXWDXS7

X-Wide/Short PSRAGXWDSH3 PSRAGXWDSH4 PSRAGXWDSH5 PSRAGXWDSH6 PSRAGXWDSH7

X-Wide/Mid PSRAGXWDPERF3 PSRAGXWDPERF4 PSRAGXWDPERF5 PSRAGXWDPERF6 PSRAGXWDPERF7

X-Wide/Reg PSRAGXWDRG3 PSRAGXWDRG4 PSRAGXWDRG5 PSRAGXWDRG6 PSRAGXWDRG7

X-Wide/Long PSRAGXWDLG3 PSRAGXWDLG4 PSRAGXWDLG5 PSRAGXWDLG6 PSRAGXWDLG7

X-Wide/X-Long PSRAGXWDXL3 PSRAGXWDXL4 PSRAGXWDXL5 PSRAGXWDXL6 PSRAGXWDXL7

X-Wide/XXL PSRAGXWDXXL3 PSRAGXWDXXL4 PSRAGXWDXXL5 PSRAGXWDXXL6 PSRAGXWDXXL7

Item numbers in bold face are manufacturer stock items. 2 Ply also available special order.

Add 3 to the end of item number for a vulcanized distal hole. Add 3K to the end of item number for knitted distal hole.



PR

OS

TH

ET

ICS

PROSTHETIC SOCKS — Continued

a. Easy Care™

True to its name, the Easy Care™ sock combines virgin wool with synthetic yarns to allow for machine wash-

ing and drying. Fleeced interior. Sold each. From Comfort Products.

Size Guide Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6

Top 6” 7” 8” 9” 10” 11” 12”

Toe (up to 18”) 3.5” 4” 5” 6” 6.5” 7” 8”

Toe (over 18”) 3.5” 4” 4” 4.5” 5” 5.5” 6”

3 Ply Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6

10” Length PSSN1003 PSSN1013 PSSN1023 PSSN1033 PSSN1043 PSSN1053 PSSN1063
































Add 3 to the end of item number for a vulcanized distal hole. Other plies available special order.



PR

OS

TH

ET

ICS

b. Comfort Products Wool Sock

100% virgin wool provides warmth, absorbency, insulation resilience, texture and versatility. Wool can absorb

up to 1/3 its weight in moisture without becoming damp. Sold each.


Top 6” 7” 8” 9” 10” 11” 12”

Toe (up to 18”) 3.5” 4” 5” 6” 6.5” 7” 8”

Toe (over 18”) 3.5” 4” 4” 4.5” 5” 5.5” 6”


10” Length PSSW1003 PSSW1013 PSSW1023 PSSW1033 PSSW1043 PSSW1053 PSSW1063
































Add 3 to the end of item number for a vulcanized distal hole.



PR

OS

TH

ET

ICS


a. SoftWick™

The SoftWick™ Sock features CoolMax® fibers to wick moisture away from the skin allowing the wearer to

stay dry and comfortable. Feels cooler in summer and warmer in winter. Resists shrinking, odor and mildew.

Machine washable. Sold each. From Comfort Products.

Size Sock Size Length 1 Ply 3 Ply 5 Ply 6 Ply

Narrow/Short 00, 0, 1 10-14” SWNS1 SWNS3 SWNS5 SWNS6

Narrow/Medium 00, 0, 1 16-20” SWNM1 SWNM3 SWNM5 SWNM6

Narrow Long 00, 0, 1 22-28” SWNL1 SWNL3 SWNL5 SWNL6

Regular/X-Short 1, 2 8-12” SWRXS1 SWRXS3 SWRXS5 SWRXS6

Regular/Short 1, 2 10-14” SWRS1 SWRS3 SWRS5 SWRS6

Regular/Medium 1, 2 16-20” SWRM1 SWRM3 SWRM5 SWRM6

Regular/Long 1, 2 22-28” SWRL1 SWRL3 SWRL5 SWRL6

Wide/Short 3+ 10-14” SWWS1 SWWS3 SWWS5 SWWS6

Wide/Medium 3+ 16-20” SWWM1 SWWM3 SWWM5 SWWM6


b. Bio-Wick™

A one ply, CoolMax® and cotton seamless prosthetic sock. The CoolMax® interior wicks moisture away from

skin and into the outer cotton layer keeping the wearer dry and comfortable. Non-run construction allows

cutting to length without unraveling. Machine washable. Sold each. From Comfort Products.

Size Sock Size Length Top Toe Item No.ò

Medium/Short Arm, 00, 0, 1 14” 3.75-7.5” 3.75-6” BWMS

Medium/Regular Arm, 00, 0, 1 20” 3.75-7.5” 3.75-6” BWMR

Medium/Long Arm, 00, 0, 1 28” 3.75-7.5” 3.75-6” BWML

Wide/Short 2, 3, 4, 5 14” 5-11” 4-8” BWWS

Wide/Regular 2, 3, 4, 5 20” 5-11” 4-8” BWWR

Wide/Long 2, 3, 4, 5 28” 5-11” 4-8” BWWL

Add 3 to the end of item number for a vulcanized distal hole.

c. Ply-Two™

The double fleeced Ply-Two™ sock is quite possibly the softest sock available. Its 2 ply acrylic/Lycra® construction

offers amazing stretch, wicks moisture away from the skin and features a rounded, nylon reinforced toe for

added durability and reduced bunching. Machine washable. Non-allergenic. Sold each. From Comfort Products.

Size Sock Size Length Top Toe Item No.ò

Narrow/X-Short Arm, 00, 0, 1 8-10” 4.5-7.5” 2.75-5” PTNXS

Narrow/Short Arm, 00, 0, 1 10-14” 4.5-7.5” 2.75-5” PTNS

Narrow/Regular Arm, 00, 0, 1 14-20” 4.5-7.5” 2.75-5” PTNR

Narrow/Long Arm, 00, 0, 1 20”+ 4.5-7.5” 275-5” PTNL

Medium/X-Short 2, 3, 4, 5, 6 8-10” 7.25-12” 4-7.5” PTMXS

Medium/Short 2, 3, 4, 5, 6 10-14” 7.25-12” 4-7.5” PTMS

Medium/Regular 2, 3, 4, 5, 6 14-20” 7.25-12” 4-7.5” PTMR

Medium/Long 2, 3, 4, 5, 6 20”+ 7.25-12” 4-7.5” PTML




PR

OS

TH

ET

ICS

d. SoftWick™ Half Sock™

The SoftWick™ Half Sock™ offers all the features of the standard SoftWick™ sock, but in ideal lengths for

distal volume management. The distal hole is knitted right into the sock to ensure a proper fit without un-

raveling. Each size features a distinct color coded band. Sold each. From Comfort Products.

Size Band Color Length Top Width Toe Width Item No.ò

1 Black 3” 3” 2.5” SW21

2 Gray 3” 3.5” 3” SW22

3 Royal Blue 6” 4” 2.75” SW23

4 Turquoise 6” 5.5” 3.5” SW24

e. BK Prosthetic Tube Sock

An economical alternative to the traditional prosthetic sock. These socks are made using a unique air float

terry construction throughout the entire length of the sock, offering comfort and durability. All cotton con-

struction provides maximum moisture absorption. 3 ply. Individually wrapped. 6/pkg. From Comfort Products.

Length 12” 16” 22” 28”

Maximum Size 8-10” 10-14” 16-20” 20-26”

Item No. ð CPT12 CPT16 CPT22 CPT28

with Distal Hole ð CPT123 CPT163 CPT223 CPT283

f. X-Wool® Sock

A virgin wool sock plaited inside with X-Static®/Lycra® corespun yarn, the X-Wool® sock features the anti-

microbial and thermodynamic properties of X-Static®. Absorbent virgin wool is thick and cushioning. Lycra®

allows garment to contour without stretching out of shape. Machine washable. Sold each. From Knit-Rite.

Size Guide Narrow Medium Wide X-Wide

Sock Size 00, 0, AS, AL 1, 2 3, 4 5, 6

Length Guide X-Short Short Regular Long X-Long XX-Long

Length 8-10” 10-12” 14-16” 18-20” 22-24” 26-28”

3 Ply 3 Ply 5 Ply 5 Ply 6 Ply Size/Length Regular Hole-In-Toe Regular Hole-In-Toe Regular

Color Code Yellow Yellow Green Green Gray

Narrow/X-Short 1WX3NAXS 1WX3SNXS 1WX5NAXS 1WX5SNXS N/A

Narrow/Short 1WX3NASH 1WX3SNSH 1WX5NASH 1WX5SNSH 1WX6NASH

Narrow/Regular 1WX3NARG 1WX3SNRG 1WX5NARG 1WX5SNRG 1WX6NARG

Narrow/Long 1WX3NALG 1WX3SNLG 1WX5NALG 1WX5SNLG 1WX6NALG

Medium/X-Short 1WX3MDXS 1WX3SMXS 1WX5MDXS 1WX5SMXS N/A

Medium/Short 1WX3MDSH 1WX3SMSH 1WX5MDSH 1WX5SMSH 1WX6MDSH

Medium/Regular 1WX3MDRG 1WX3SMRG 1WX5MDRG 1WX5SMRG 1WX6MDRG

Medium/Long 1WX3MDLG 1WX3SMLG 1WX5MDLG 1WX5SMLG 1WX6MDLG

Medium/X-Long 1WX3MDXL N/A 1WX5MDXL N/A N/A

Medium/XX-Long 1WX3MDXX N/A 1WX5MDXX N/A N/A

Wde/Short 1WX3WDSH 1WX3SWSH 1WX5WDSH 1WX5SWSH 1WX6WDSH

Wide/Medium 1WX3WDMD 1WX3SWMD 1WX5WDMD 1WX5SWMD 1WX6WDMD

Wide/Long 1WX3WDLG N/A 1WX5WDLG N/A 1WX6WDLG

Wide/X-Long 1WX3WDXL N/A 1WX5WDXL N/A N/A

Wide/XX-Long 1WX3WDXX N/A 1WX5WDXX N/A N/A

X-Wide/Short 1WX3EWSH N/A 1WX5EWSH N/A N/A

X-Wide/Medium 1WX3EWMD N/A 1WX5EWMD N/A N/A



PR

OS

TH

ET

ICS


a. Super Sock®

100% virgin wool sock. Uniquely soft. Machine wash and dry. Sold each. See pages 789 for hole-in-toe and

nonstandard Super Sock® sizes. Sold each. From Knit-Rite.


Top 6” 7” 8” 9” 10” 11” 12”

Toe 3.5” 4” 5” 6” 7” 7” 8”

Toe Over 24” Over 20” Over 20” Over 18” Over 18” 4” 5.5” 6” 5.5” 6”


8” Length 1K130008 1K130108 1K130208 1K130308 1K130408 1K130508 1K130608

10” Length 1K130010 1K130110 1K130210 1K130310 1K130410 1K130510 1K130610

12” Length 1K130012 1K130112 1K130212 1K130312 1K130412 1K130512 1K130612

14” Length 1K130014 1K130114 1K130214 1K130314 1K130414 1K130514 1K130614

16” Length 1K130016 1K130116 1K130216 1K130316 1K130416 1K130516 1K130616

18” Length 1K130018 1K130118 1K130218 1K130318 1K130418 1K130518 1K130618

20” Length 1K130020 1K130120 1K130220 1K130320 1K130420 1K130520 1K130620

22” Length 1K130022 1K130122 1K130222 1K130322 1K130422 1K130522 1K130622

24” Length 1K130024 1K130124 1K130224 1K130324 1K130424 1K130524 1K130624

26” Length 1K130026 1K130126 1K130226 1K130326 1K130426 1K130526 1K130626

28” Length 1K130028 1K130128 1K130228 1K130328 1K130428 1K130528 1K130628

30” Length 1K130030 1K130130 1K130230 1K130330 1K130430 1K130530 1K130630


8” Length 1K150008 1K150108 1K150208 1K150308 1K150408 1K150508 1K150608

10” Length 1K150010 1K150110 1K150210 1K150310 1K150410 1K150510 1K150610

12” Length 1K150012 1K150112 1K150212 1K150312 1K150412 1K150512 1K150612

14” Length 1K150014 1K150114 1K150214 1K150314 1K150414 1K150514 1K150614

16” Length 1K150016 1K150116 1K150216 1K150316 1K150416 1K150516 1K150616

18” Length 1K150018 1K150118 1K150218 1K150318 1K150418 1K150518 1K150618

20” Length 1K150020 1K150120 1K150220 1K150320 1K150420 1K150520 1K150620

22” Length 1K150022 1K150122 1K150222 1K150322 1K150422 1K150522 1K150622

24” Length 1K150024 1K150124 1K150224 1K150324 1K150424 1K150524 1K150624

26” Length 1K150026 1K150126 1K150226 1K150326 1K150426 1K150526 1K150626

28” Length 1K150028 1K150128 1K150228 1K150328 1K150428 1K150528 1K150628

30” Length 1K150030 1K150130 1K150230 1K150330 1K150430 1K150530 1K150630

6 Ply Size 0 Size 1 Size 2 Size 3 Size 4 Size 5

8” Length 1K160008 1K160108 1K160208 1K160308 1K160408 1K160508

10” Length 1K160010 1K160110 1K160210 1K160310 1K160410 1K160510

12” Length 1K160012 1K160112 1K160212 1K160312 1K160412 1K160512

14” Length 1K160014 1K160114 1K160214 1K160314 1K160414 1K160514

16” Length 1K160016 1K160116 1K160216 1K160316 1K160416 1K160516

18” Length 1K160018 1K160118 1K160218 1K160318 1K160418 1K160518

20” Length 1K160020 1K160120 1K160220 1K160320 1K160420 1K160520

22” Length 1K160022 1K160122 1K160222 1K160322 1K160422 1K160522

24” Length 1K160024 1K160124 1K160224 1K160324 1K160424 1K160524

26” Length 1K160026 1K160126 1K160226 1K160326 1K160426 1K160526

28” Length 1K160028 1K160128 1K160228 1K160328 1K160428 1K160528

30” Length 1K160030 1K160130 1K160230 1K160330 1K160430 1K160530

Item numbers in bold face are manufacturer stock items.



PR

OS

TH

ET

ICS

b. Super Sock®, Hole-In-Toe

100% virgin wool sock. Uniquely soft. Machine wash and dry. Sold each. See below for nonstandard Super

Sock® sizes. Sold each. From Knit-Rite.

Size 0 Top x Toe Ply 10” Length 12” Length

6” x 3.5” 3 1K13S010 1K13S012

6” x 3.5” 5 1K15S010 1K15S012

Size 1 Top x Toe Ply 10” Length 12” Length 14” Length

7” x 4” 3 1K13S110 1K13S112 1K13S114

7” x 4” 5 1K15S110 1K15S112 1K15S114

Size 2 Top x Toe Ply 10” Length 12” Length 14” Length 16” Length

8” x 5” 3 1K13S210 1K13S212 1K13S214 1K13S216

8” x 5” 5 1K15S210 1K15S212 1K15S214 1K15S216

Size 3 Top x Toe Ply 10” Length 12” Length 14” Length 16” Length 18” Length

9” x 6” 3 1K13S312 1K13S314 1K13S316 1K13S318

9” x 6” 5 1K15S312 1K15S314 1K15S316 N/A


c. Super Sock®, PTB Wide Taper


Size 0 Top Toe Length 3 Ply 5 Ply 6 Ply

6” 3” 10” 1T130310 1T150310 1T160310

6” 3” 12” 1T130312 1T150312 1T160312

6” 3” 14” 1T130314 1T150314 1T160314

6” 3” 16” 1T130316 1T150316 1T160316


7” 3.5” 10” 1T131310 1T151310 1T161310

7” 3.5” 12” 1T131312 1T151312 1T161312

7” 3.5” 14” 1T131314 1T151314 1T161314

7” 3.5” 16” 1T131316 1T151316 1T161316

7” 4.5” 10” 1T131410 1T151410 1T161410

7” 4.5” 12” 1T131412 1T151412 1T161412

7” 4.5” 14” 1T131414 1T151414 1T161414

7” 4.5” 16” 1T131416 1T151416 1T161416


8” 4” 10” 1T132410 1T152410 1T162410

8” 4” 12” 1T132412 1T152412 1T162412

8” 4” 14” 1T132414 1T152414 1T162414

8” 4” 16” 1T132416 1T152416 1T162416

8” 4.5” 10” 1T132S10 1T152S10 1T162S10

8” 4.5” 12” 1T132S12 1T152S12 1T162S12

8” 4.5” 14” 1T132S14 1T152S14 1T162S14

8” 4.5” 16” 1T132S16 1T152S16 1T162S16




PR

OS

TH

ET

ICS


a. Soft-Sock®

The fibers of the Soft-Sock® wick moisture away from the skin and inhibit the growth of odor- causing bacteria.

Fleeced interior feels soft and cuddly worn next to the skin and insulates against the cold. Lycra® provides

stretch for excellent fit. Available in CoolMax®/Lycra® or Polyester/Lycra® with X-Static®—The Silver Fiber™.

Sold each. From Knit-Rite. See page 548 for child sizes.

CoolMax®/Lycra®

Size/Length Sock Size Length Lightweight 3 Ply 5 Ply 6 Ply

Narrow/Short B, 0, 1 10-14” 1SP1NASH 1SP3NASH 1SP5NASH 1SP6NASH

Narrow/Medium B, 0, 1 16-20” 1SP1NAMD 1SP3NAMD 1SP5NAMD 1SP6NAMD

Narrow/Long B, 0, 1 22-28” 1SP1NALG 1SP3NALG 1SP5NALG 1SP6NALG

Regular/X-Short 1, 2 8-12” 1SP1RGXS 1SP3RGXS 1SP5RGXS 1SP6RGXS

Regular/Short 1, 2 10-14” 1SP1RGSH 1SP3RGSH 1SP5RGSH 1SP6RGSH

Regular/Medium 1, 2 16-20” 1SP1RGMD 1SP3RGMD 1SP5RGMD 1SP6RGMD

Regular/Long 1, 2 22-28” 1SP1RGLG 1SP3RGLG 1SP5RGLG 1SP6RGLG

Wide/Short 3+ 10-14” 1SP1WDSH 1SP3WDSH 1SP5WDSH 1SP6WDSH

Wide/Medium 3+ 16-20” 1SP1WDMD 1SP3WDMD 1SP5WDMD 1SP6WDMD

X-Wide/Short 4+ 10-14” 1SP1XWSH 1SP3XWSH 1SP5XWSH N/A

X-Wide/Medium 4+ 16-20” 1SP1XWMD 1SP3XWMD 1SP5XWMD N/A

CoolMax®/Lycra® — Hole-In-Toe


Narrow/Short B, 0, 1 10-14” 1SPSNASH 1SP3SNSH 1SP5SNSH 1SP6SNSH

Narrow/Medium B, 0, 1 16-20” 1SPSNAMD 1SP3SNMD 1SP5SNMD 1SP6SNMD

Regular/X-Short 1, 2 8-12” 1SPSRGXS 1SP3SRXS 1SP5SRXS 1SP6SRXS

Regular/Short 1, 2 10-14” 1SPSRGSH 1SP3SRSH 1SP5SRSH 1SP6SRSH

Regular/Medium 1, 2 16-20” 1SPSRGMD 1SP3SRMD 1SP5SRMD 1SP6SRMD

Regular/Long 1, 2 22-28” 1SPSRGLG 1SP3SRLG 1SP5SRLG 1SP6SRLG

Wide/Short 3+ 10-14” 1SPSWDSH 1SP3SWSH 1SP5SWSH 1SP6SWSH

Wide/Medium 3+ 16-20” 1SPSWDMD 1SP3SWMD 1SP5SWMD 1SP6SWMD

Polyester/X-Static®/Lycra®


Narrow/Short B, 0, 1 10-14” 1SX1NASH 1SX3NASH 1SX5NASH N/A

Regular/Short 1, 2 10-14” 1SX1RGSH 1SX3RGSH 1SX5RGSH N/A

Regular/Medium 1, 2 16-20” 1SX1RGMD 1SX3RGMD 1SX5RGMD N/A

Wide/Medium 3+ 16-20” 1SX1WDMD 1SX3WDMD 1SX5WDMD N/A




PR

OS

TH

ET

ICS

b. DERO® Hole-In-Toe Soft-Sock®

The DERO sock minimizes or eliminates unwanted rotation and vertical movement between the outer socket

and silicone suspension liner or gel interface by incorporating friction enhancing polymer strips in the pros-

thetic sock. The DERO sock provides an opportunity for silicone suction suspension in transfemoral cases

where it may otherwise be contraindicated by allowing easier donning and volume management capability.

The polymer strips add virtually no thickness and are vertically oriented in standard AK and BK patterns to

allow various ply combinations, while maintaining the circumferential stretch inherent in the Soft-Sock®

prosthetic sock. Sold each. From Knit-Rite.

Style Size Sock Size Length Lightweight 3 Ply 5 Ply

AK Regular Short 1, 2 10-14” 1DA1RGSH 1DA3RGSH 1DA5RGSH

AK Wide Medium 3+ 16-20” 1DA1WDMD 1DA3WDMD 1DA5WDMD

BK Regular Short 1, 2 10-14” 1DB1RGSH 1DB3RGSH 1DB5RGSH

c. Hugger Top Soft-Sock®

Hugger Top Soft-Sock® provides a more tailored fit, reduces rolling and bunching and helps maintain sock

placement. It features a new patented hemispherically knit three-dimensional distal shape. The new distal

end shape provides improved fitting qualities and comfort over the traditional flat knit envelope shape of

prosthetic socks. Sold each. From Knit-Rite. See page 548 for child sizes.

Ply Lightweight 3-Ply Lightweight 3-Ply Lightweight 3-Ply

Standard Sock Black Black Pink Pink White White

Narrow Short 1BP1NASH 1BP3NASH 1S21NASH 1S23NASH 1HP1NASH 1HP3NASH

Regular Medium 1BP1RGMD 1BP3RGMD N/A N/A 1HP1RGMD 1HP3RGMD

Regular Short 1BP1RGSH 1BP3RGSH 1S21RGSH 1S23RGSH 1HP1RGSH 1HP3RGSH

Regular X-Short 1BP1RGXS 1BP3RGXS 1S21RGXS 1S23RGXS 1HP1RGXS 1HP3RGXS

Hole-in-Toe Sock Black Black Pink Pink White White

Narrow Short 1BPSNASH 1BP3SNSH 1S21SNSH 1S23NASH 1HPSNASH 1HP3SNSH

Regular Medium 1BPSRGMD 1BP3SRMD N/A N/A 1HPSRGMD 1HP3SRMD

Regular Short 1BPSRGSH 1BP3SRSH 1S21SRSH 1S23SRSH 1HPSRGSH 1HP3SRSH

Regular X-Short 1BPSRGXS 1BP3SRXS 1S21SRXS 1S23SRXS 1HPSRGXS 1HP3SRXS

d. Shorty Soft-Sock®

Shorty Soft-Sock is designed for use with elevated vacuum and total surface bearing sockets (TSB). It is shorter

in length to reduce volume mainly in the distal one third of the socket and remains below the suction sleeve.

Color keyed for ease of patient instruction. Distal hole. Knit with easy care CoolMax®. Sold each. From Knit-Rite.

Stitching Top Toe Length Item No.ò

Red 4-3/4” 2-3/4” 7” 1SPSS181

Red 5-3/4” 3-1/8 5-5/8” 1SPSS191

Black 3-1/8” 2-5/8” 3-5/8” 1SPSS182

Black 4-1/2” 4” 3-1/4” 1SPSS192



PR

OS

TH

ET

ICS


a. A-Plus™ Sock

Acrylic/Lycra® spandex construction provides softness and stretch while wicking moisture away from the skin

for added comfort. Snuggly knit, the 2 ply A-Plus™ sock (green stitching) is comparable in thickness to a 3

ply wool sock; the 3 ply A-Plus™ sock (blue stitching) is comparable to a 5 ply wool; and the 4 ply A-plus™

sock (red stitching) is comparable to a 6 ply wool. Sold each. From Knit-Rite.

Size Guide Size 0 Size 1 Size 2 Size 3 Size 4

Top 6” 7” 8” 9” 10”

Toe 3.5’ 4” 5” 6” 7”

Toe Over 20” Over 20” 5.5” 6”

Length 8” 10” 12” 14” 16” 18” 20” 22” 24”

Size 0

2 Ply 1KL20008 1KL20010 1KL20012 1KL20014 1KL20016 1KL20018 1KL20020 1KL20022 1KL20024



Size 1




Size 2




Size 3




Size 4







PR

OS

TH

ET

ICS

b. A-Plus™ Sock, Hole-In-Toe

Knit-Rite’s A-Plus Sock with distal hole. Acrylic/Lycra® spandex construction provides softness and stretch while

wicking moisture away from the skin for added comfort. Snuggly knit, the 2 ply A-Plus™ sock is comparable

in thickness to a 3 ply wool sock; the 3 ply A-Plus™ sock is comparable to a 5 ply wool; and the 4 ply A-plus™

is comparable to a 6 ply wool. Sold each. See next page for nonstandard sizes.

Size Guide Size 0 Size 1 Size 2 Size 3 Size 4

Top 6” 7” 8” 9” 10”

Toe 3.5’ 4” 5” 6” 7”

Toe Over 20” Over 20” 5.5” 6”

Length 8” 10” 12” 14” 16” 18” 20” 22” 24”

Size 0

2 Ply 1KL2S008 1KL2S010 1KL2S012 1KL2S014 1KL2S016 1KL2S018 1KL2S020 1KL2S022 1KL2S024



Size 1




Size 2




Size 3




Size 4







PR

OS

TH

ET

ICS


a. A-Plus™ Sock, Hole-In-Toe PTB Slim Taper

Sold each. From Knit-Rite. See previous page for standard sizes.


6” 4” 10” 1TH20410 1TH30410 1TH40410

6” 4” 12” 1TH20412 1TH30412 1TH40412

6” 4” 14” 1TH20414 1TH30414 1TH40414

6” 4” 16” 1TH20416 1TH30416 1TH40416

6” 5” 10” 1TH20510 1TH30510 1TH40510

6” 5” 12” 1TH20512 1TH30512 1TH40512

6” 5” 14” 1TH20514 1TH30514 1TH40514

6” 5” 16” 1TH20516 1TH30516 1TH40516


7” 5” 10” 1TH21510 1TH31510 1TH41510

7” 5” 12” 1TH21512 1TH31512 1TH41512

7” 5” 14” 1TH21514 1TH31514 1TH41514

7” 5” 16” 1TH21516 1TH31516 1TH41516


8” 6” 10” 1TH22610 1TH32610 1TH42610

8” 6” 12” 1TH22612 1TH32612 1TH42612

8” 6” 14” DISCON 1TH32614 1TH42614

8” 6” 16” 1TH22616 1TH32616 1TH42616




PR

OS

TH

ET

ICS

b. Sterling® Wool

25% domestic virgin wool, 75% Australian virgin wool. The domestic wool provides strength and longev-

ity, while the Australian wool adds softness and elasticity. 1 and 2-ply socks may be machine washed. Sold

each. Stitching color code listed beneath ply. Sold each. From Knit-Rite. See pages 798 for hole-in-toe and

nonstandard sizes.

Size 00

Top Toe Length 1 Ply 2 Ply 3 Ply 5 Ply 6 Ply 7 Ply 8 Ply White Beige Yellow Green Gray Lavender Lt Blue

5” 3” 10” 1MS1D010 1MS2D010 1WS3D010 1WS5D010 1WS6D010 1WS7D010 1WS8D010









5” 3” 28” N/A N/A 1WS3D028 1WS5D028 1WS6D028 N/A N/A

Size 0


6” 3.5” 10” 1MS11010 1MS21010 1WS31010 1WS51010 1WS61010 1WS71010 1WS81010

6” 3.5” 12” 1MS11012 1MS21012 1WS31012 1WS51012 1WS61012 1WS71012 1WS81012

6” 3.5” 14” 1MS11014 1MS21014 1WS31014 1WS51014 1WS61014 1WS71014 1WS81014

6” 3.5” 16” 1MS11016 1MS21016 1WS31016 1WS51016 1WS61016 1WS71016 1WS81016

6” 3.5” 18” 1MS11018 1MS21018 1WS31018 1WS51018 1WS61018 1WS71018 1WS81018

6” 3.5” 20” 1MS11020 1MS21020 1WS31020 1WS51020 1WS61020 1WS71020 1WS81020

6” 3.5” 22” 1MS11022 1MS21022 1WS31022 1WS51022 1WS61022 1WS71022 1WS81022

6” 3.5” 24” 1MS11024 1MS21024 1WS31024 1WS51024 1WS61024 1WS71024 1WS81024

6” 3.5” 26” 1MS11026 1MS21026 1WS31026 1WS51026 1WS61026 1WS71026 1WS81026

6” 3.5” 28” N/A N/A 1WS31028 1WS51028 1WS61028 N/A N/A

Size 1


7” 4” 10” 1MS11110 1MS21110 1WS31110 1WS51110 1WS61110 1WS71110 1WS81110

7” 4” 12” 1MS11112 1MS21112 1WS31112 1WS51112 1WS61112 1WS71112 1WS81112

7” 4” 14” 1MS11114 1MS21114 1WS31114 1WS51114 1WS61114 1WS71114 1WS81114

7” 4” 16” 1MS11116 1MS21116 1WS31116 1WS51116 1WS61116 1WS71116 1WS81116

7” 4” 18” 1MS11118 1MS21118 1WS31118 1WS51118 1WS61118 1WS71118 1WS81118

7” 4” 20” 1MS11120 1MS21120 1WS31120 1WS51120 1WS61120 1WS71120 1WS81120

7” 4” 22” 1MS11122 1MS21122 1WS31122 1WS51122 1WS61122 1WS71122 1WS81122

7” 4” 24” 1MS11124 1MS21124 1WS31124 1WS51124 1WS61124 1WS71124 1WS81124

7” 4” 26” 1MS11126 1MS21126 1WS31126 1WS51126 1WS61126 1WS71126 1WS81126

7” 4” 28” N/A N/A 1WS31128 1WS51128 1WS61128 N/A N/A


Continued next page.



PR

OS

TH

ET

ICS


a. Sterling® Wool, continued

Size 2


8” 4” 10” 1MS10210 1MS20210 1WS30210 1WS50210 1WS60210 1WS70210 1WS80210

8” 4” 12” 1MS10212 1MS20212 1WS30212 1WS50212 1WS60212 1WS70212 1WS80212

8” 4” 14” 1MS10214 1MS20214 1WS30214 1WS50214 1WS60214 1WS70214 1WS80214

8” 4” 16” 1MS10216 1MS20216 1WS30216 1WS50216 1WS60216 1WS70216 1WS80216

8” 4” 18” 1MS10218 1MS20218 1WS30218 1WS50218 1WS60218 1WS70218 1WS80218

8” 4” 20” 1MS10220 1MS20220 1WS30220 1WS50220 1WS60220 1WS70220 1WS80220

8” 4” 22” 1MS10222 1MS20222 1WS30222 1WS50222 1WS60222 1WS70222 1WS80222

8” 4” 24” 1MS10224 1MS20224 1WS30224 1WS50224 1WS60224 1WS70224 1WS80224

8” 4” 26” 1MS10226 1MS20226 1WS30226 1WS50226 1WS60226 1WS70226 1WS80226

8” 4” 28” N/A N/A 1WS30228 1WS50228 1WS60228 N/A N/A

8” 4.5” 10” 1MS11210 1MS21210 1WS31210 1WS51210 1WS61210 1WS71210 1WS81210

8” 4.5” 12” 1MS11212 1MS21212 1WS31212 1WS51212 1WS61212 1WS71212 1WS81212

8” 4.5” 14” 1MS11214 1MS21214 1WS31214 1WS51214 1WS61214 1WS71214 1WS81214

8” 4.5” 16” 1MS11216 1MS21216 1WS31216 1WS51216 1WS61216 1WS71216 1WS81216

8” 4.5” 18” 1MS11218 1MS21218 1WS31218 1WS51218 1WS61218 1WS71218 1WS81218

8” 4.5” 20” 1MS11220 1MS21220 1WS31220 1WS51220 1WS61220 1WS71220 1WS81220

8” 4.5” 22” 1MS11222 1MS21222 1WS31222 1WS51222 1WS61222 1WS71222 1WS81222

8” 4.5” 24” 1MS11224 1MS21224 1WS31224 1WS51224 1WS61224 1WS71224 1WS81224

8” 4.5” 26” 1MS11226 1MS21226 1WS31226 1WS51226 1WS61226 1WS71226 1WS81226

8” 5” 10” 1MS12210 1MS22210 1WS32210 1WS52210 1WS62210 1WS72210 1WS82210

8” 5” 12” 1MS12212 1MS22212 1WS32212 1WS52212 1WS62212 1WS72212 1WS82212

8” 5” 14” 1MS12214 1MS22214 1WS32214 1WS52214 1WS62214 1WS72214 1WS82214

8” 5” 16” 1MS12216 1MS22216 1WS32216 1WS52216 1WS62216 1WS72216 1WS82216

8” 5” 18” 1MS12218 1MS22218 1WS32218 1WS52218 1WS62218 1WS72218 1WS82218

8” 5” 20” 1MS12220 1MS22220 1WS32220 1WS52220 1WS62220 1WS72220 1WS82220

8” 5” 22” 1MS12222 1MS22222 1WS32222 1WS52222 1WS62222 1WS72222 1WS82222

8” 5” 24” 1MS12224 1MS22224 1WS32224 1WS52224 1WS62224 1WS72224 1WS82224

8” 5” 26” 1MS12226 1MS22226 1WS32226 1WS52226 1WS62226 1WS72226 1WS82226

8” 5” 28” N/A N/A 1WS32228 1WS52228 1WS62228 N/A N/A

Size 3


9” 6” 10” 1MS10310 1MS20310 1WS30310 1WS50310 1WS60310 1WS70310 1WS80310

9” 6” 12” 1MS10312 1MS20312 1WS30312 1WS50312 1WS60312 1WS70312 1WS80312

9” 6” 14” 1MS10314 1MS20314 1WS30314 1WS50314 1WS60314 1WS70314 1WS80314

9” 6” 16” 1MS10316 1MS20316 1WS30316 1WS50316 1WS60316 1WS70316 1WS80316

9” 6” 18” 1MS10318 1MS20318 1WS30318 1WS50318 1WS60318 1WS70318 1WS80318

9” 4.5” 20” 1MS10320 1MS20320 1WS30320 1WS50320 1WS60320 1WS70320 1WS80320

9” 4.5” 22” 1MS10322 1MS20322 1WS30322 1WS50322 1WS60322 1WS70322 1WS80322

9” 4.5” 24” 1MS10324 1MS20324 1WS30324 1WS50324 1WS60324 1WS70324 1WS80324

9” 4.5” 26” 1MS10326 1MS20326 1WS30326 1WS50326 1WS60326 1WS70326 1WS80326





PR

OS

TH

ET

ICS

b. Sterling® Wool, continued

Size 4


10” 6.5” 10” 1MS14110 1MS20410 1WS30410 1WS50410 1WS60410 1WS70410 1WS80410

10” 6.5” 12” 1MS14112 1MS20412 1WS30412 1WS50412 1WS60412 1WS70412 1WS80412

10” 6.5” 14” 1MS14114 1MS20414 1WS30414 1WS50414 1WS60414 1WS70414 1WS80414

10” 6.5” 16” 1MS14116 1MS20416 1WS30416 1WS50416 1WS60416 1WS70416 1WS80416

10” 6.5” 18” 1MS14118 1MS20418 1WS30418 1WS50418 1WS60418 1WS70418 1WS80418

10” 5” 20” 1MS14120 1MS20420 1WS30420 1WS50420 1WS60420 1WS70420 1WS80420

10” 5” 22” 1MS14122 1MS20422 1WS30422 1WS50422 1WS60422 1WS70422 1WS80422

10” 5” 24” 1MS14124 1MS20424 1WS30424 1WS50424 1WS60424 1WS70424 1WS80424

10” 5” 26” 1MS14126 1MS20426 1WS30426 1WS50426 1WS60426 1WS70426 1WS80426

10” 5” 28” N/A N/A 1WS30428 1WS50428 1WS60428 N/A N/A

Size 5


11” 7” 10” 1MS15110 1MS20510 1WS30510 1WS50510 N/A N/A N/A

11” 7” 12” 1MS15112 1MS20512 1WS30512 1WS50512 N/A N/A N/A

11” 7” 14” 1MS15114 1MS20514 1WS30514 1WS50514 N/A N/A N/A

11” 7” 16” 1MS15116 1MS20516 1WS30516 1WS50516 N/A N/A N/A

11” 7” 18” 1MS15118 1MS20518 1WS30518 1WS50518 N/A N/A N/A

11” 5.5” 20” 1MS15120 1MS20520 1WS30520 1WS50520 N/A N/A N/A

11” 5.5” 22” 1MS15122 1MS20522 1WS30522 1WS50522 N/A N/A N/A

11” 5.5” 24” 1MS15124 1MS20524 1WS30524 1WS50524 N/A N/A N/A

11” 5.5” 26” 1MS15126 1MS20526 1WS30526 1WS50526 N/A N/A N/A

11” 5.5” 28” N/A N/A 1WS30528 1WS50528 N/A N/A N/A

Size 6


12” 8” 10” 1MS16110 1MS20610 1WS30610 1WS50610 N/A N/A N/A

12” 8” 12” 1MS16112 1MS20612 1WS30612 1WS50612 N/A N/A N/A

12” 8” 14” 1MS16114 1MS20614 1WS30614 1WS50614 N/A N/A N/A

12” 8” 16” 1MS16116 1MS20616 1WS30616 1WS50616 N/A N/A N/A

12” 8” 18” 1MS16118 1MS20618 1WS30618 1WS50618 N/A N/A N/A

12” 6” 20” 1MS16120 1MS20620 1WS30620 1WS50620 N/A N/A N/A

12” 6” 22” 1MS16122 1MS20622 1WS30622 1WS50622 N/A N/A N/A

12” 6” 24” 1MS16124 1MS20624 1WS30624 1WS50624 N/A N/A N/A

12” 6” 26” 1MS16126 1MS20626 1WS30626 1WS50626 N/A N/A N/A

12” 6” 28” N/A N/A 1WS30628 1WS50628 N/A N/A N/A




PR

OS

TH

ET

ICS


a. Sterling® Wool — Hole-in-Toe

Standard sizes. Stitching color code listed beneath ply. Sold each. From Knit-Rite.

Top Toe Length 1 Ply 3 Ply 5 Ply White Yellow Green

Size 0 6” 3.5” 10” N/A 1HS31010 1HS51010

6” 3.5” 12” N/A 1HS31012 1HS51012

Size 1 7” 4” 10” 1HS11110 1HS31110 1HS51110

7” 4” 12” 1HS11112 1HS31112 1HS51112

7” 4” 14” 1HS11114 1HS31114 1HS51114

Size 2 8” 4” 10” N/A 1HS30210 1HS50210

8” 4” 12” N/A 1HS30212 1HS50212

8” 4” 14” N/A 1HS30214 1HS50214

8” 4” 16” N/A 1HS30216 1HS50216

8” 4.5” 10” N/A 1HS31210 1HS51210

8” 4.5” 12” N/A 1HS31212 1HS51212

8” 4.5” 14” N/A 1HS31214 1HS51214

8” 4.5” 16” N/A 1HS31216 1HS51216

8” 5” 10” 1HS12210 1HS32210 1HS52210

8” 5” 12” 1HS12212 1HS32212 1HS52212

8” 5” 14” 1HS12214 1HS32214 1HS52214

8” 5” 16” N/A 1HS32216 1HS52216

Size 3 9” 6” 12” N/A 1HS30312 1HS50312

9” 6” 14” N/A 1HS30314 1HS50314

9” 6” 16” N/A 1HS30316 1HS50316


b. Sterling® — PTB

Stitching color code listed beneath ply. Sold each. From Knit-Rite.

10” (25cm) Length Wool Wool Wool Cotton Cotton

Top Toe 3 Ply 5 Ply 6 Ply 3 Ply 5 Ply Yellow Green Gray Yellow Green

6” 3” 1WS30010 1WS50010 1WS60010 1CS30010 1CS50010

6” 3.5” 1WS31010 1WS51010 1WS61010 1CS31010 1CS51010

6” 4” 1WS32010 1WS52010 1WS62010 1CS32010 1CS52010

6” 5” 1WS33010 1WS53010 1WS63010 1CS33010 1CS53010

7” 3.5” 1WS30110 1WS50110 1WS60110 1CS30110 1CS50110

7” 4” 1WS31110 1WS51110 1WS61110 1CS31110 1SC51110

7” 4.5” 1WS32110 1WS52110 1WS62110 1CS32110 1CS52110

7” 5” 1WS33110 1WS53110 1WS63110 1CS33110 1CS53110

8” 4” 1WS30210 1WS50210 1WS60210 1CS30210 1CS50210

8” 4.5” 1WS31210 1WS51210 1WS61210 1CS31210 1CS51210

8” 5” 1WS32210 1WS52210 1WS62210 1CS32210 1CS52210





PR

OS

TH

ET

ICS

c. Sterling® — PTB, continued



6” 3” 1WS30012 1WS50012 1WS60012 1CS30012 1CS50012

6” 3.5” 1WS31012 1WS51012 1WS61012 1CS31012 1CS51012

6” 4” 1WS32012 1WS52012 1WS62012 1CS32012 1CS52012

6” 5” 1WS33012 1WS53012 1WS63012 1CS33012 1CS53012

7” 3.5” 1WS30112 1WS50112 1WS60112 1CS30112 1CS50112

7” 4” 1WS31112 1WS51112 1WS61112 1CS31112 1SC51112

7” 4.5” 1WS32112 1WS52112 1WS62112 1CS32112 1CS52112

7” 5” 1WS33112 1WS53112 1WS63112 1CS33112 1CS53112

8” 4” 1WS30212 1WS50212 1WS60212 1CS30212 1CS50212

8” 4.5” 1WS31212 1WS51212 1WS61212 1CS31212 1CS51212

8” 5” 1WS32212 1WS52212 1WS62212 1CS32212 1CS52212



6” 3” 1WS30014 1WS50014 1WS60014 1CS30014 1CS50014

6” 3.5” 1WS31014 1WS51014 1WS61014 1CS31014 1CS51014

6” 4” 1WS32014 1WS52014 1WS62014 1CS32014 1CS52014

6” 5” 1WS33014 1WS53014 1WS63014 1CS33014 1CS53014

7” 3.5” 1WS30114 1WS50114 1WS60114 1CS30114 1CS50114

7” 4” 1WS31114 1WS51114 1WS61114 1CS31114 1SC51114

7” 4.5” 1WS32114 1WS52114 1WS62114 1CS32114 1CS52114

7” 5” 1WS33114 1WS53114 1WS63114 1CS33114 1CS53114

8” 4” 1WS30214 1WS50214 1WS60214 1CS30214 1CS50214

8” 4.5” 1WS31214 1WS51214 1WS61214 1CS31214 1CS51214

8” 5” 1WS32214 1WS52214 1WS62214 1CS32214 1CS52214



6” 3” 1WS30016 1WS50016 1WS60016 1CS30016 1CS50016

6” 3.5” 1WS31016 1WS51016 1WS61016 1CS31016 1CS51016

6” 4” 1WS32016 1WS52016 1WS62016 1CS32016 1CS52016

6” 5” 1WS33016 1WS53016 1WS63016 1CS33016 1CS53016

7” 3.5” 1WS30116 1WS50116 1WS60116 1CS30116 1CS50116

7” 4” 1WS31116 1WS51116 1WS61116 1CS31116 1SC51116

7” 4.5” 1WS32116 1WS52116 1WS62116 1CS32116 1CS52116

7” 5” 1WS33116 1WS53116 1WS63116 1CS33116 1CS53116

8” 4” 1WS30216 1WS50216 1WS60216 1CS30216 1CS50216

8” 4.5” 1WS31216 1WS51216 1WS61216 1CS31216 1CS51216

8” 5” 1WS32216 1WS52216 1WS62216 1CS32216 1CS52216




PR

OS

TH

ET

ICS


a. Sterling® Stretch Sock

Acrylic/Lycra® blend helps sock conform to the shape of the limb. Fleecing on the inside adds softness. These

socks contour and cushion the limb, while wicking moisture away from the skin. Sold each. From Knit-Rite.

Size/Length Sock Size Top Toe Length 3 Ply 5 Ply 6 Ply

Narrow/X-Short 00, 0, A 4-6” 3-3.5” 8-10” 1SS3NAXS 1SS5NAXS 1SS6NAXS

Narrow/Short 00, 0, A 4-6” 3-3.5” 10-12” 1SS3NASH 1SS5NASH 1SS6NASH

Narrow/Reguar 00, 0, A 4-6” 3-3.5” 14-16” 1SS3NARG 1SS5NARG 1SS6NARG

Narrow/Long 00, 0, A 4-6” 3-3.5” 18-20” 1SS3NALG 1SS5NALG 1SS6NALG

Medium/X-Short 1, 2 7-8” 4-5” 8-10” 1SS3MDXS 1SS5MDXS 1SS6MDXS

Medium/Short 1, 2 7-8” 4-5” 10-12” 1SS3MDSH 1SS5MDSH 1SS6MDSH

Medium/Regular 1, 2 7-8” 4-5” 14-16” 1SS3MDRG 1SS5MDRG 1SS6MDRG

Medium/Long 1, 2 7-8” 4-5” 18-20” 1SS3MDLG 1SS5MDLG 1SS6MDLG

Medium/X-Long 1, 2 7-8” 4-5” 22-24” 1SS3MDXL 1SS5MDXL 1SS6MDXL

Medium/XX-Long 1, 2 7-8” 4-5” 26-28” 1SS3MDXX 1SS5MDXX 1SS6MDXX

Wide/Short 3, 4 9-10” 6-7” 10-12” 1SS3WDSH 1SS5WDSH 1SS6WDSH

Wide/Medium 3, 4 9-10” 6-7” 14-16” 1SS3WDMD 1SS5WDMD 1SS6WDMD

Wide/Long 3, 4 9-10” 4.5-5” 18-20” 1SS3WDLG 1SS5WDLG 1SS6WDLG

Wide/X-Long 3, 4 9-10” 4.5-5” 22-24” 1SS3WDXL 1SS5WDXL 1SS6WDXL

Wide/XX-Long 3, 4 9-10” 4.5-5” 26-28” 1SS3WDXX 1SS5WDXX 1SS6WDXX

X-Wide/Short 5, 6 11-12” 7-8” 12-14” 1SS3EWSH 1SS5EWSH 1SS6EWSH

X-Wide/Medium 5, 6 11-12” 7-8” 16-18” 1SS3EWMD 1SS5EWMD 1SS6EWMD


b. Sterling® Stretch, Hole-in-Toe

Acrylic/Lycra® blend helps sock conform to the shape of the limb. Fleecing on the inside adds softness. These

socks contour and cushion the limb, while wicking moisture away from the skin. Sold each. From Knit-Rite.

Size/Length Sock Size Top Toe Length 3 Ply 5 Ply 6 Ply

Narrow/Short 00, 0, A 4-6” 3-3.5” 10-12” 1HS3NASH 1HS5NASH 1HS6NASH

Narrow/Reguar 00, 0, A 4-6” 3-3.5” 14-16” 1HS3NARG 1HS5NARG 1HS6NARG

Narrow/Long 00, 0, A 4-6” 3-3.5” 18-20” 1HS3NALG 1HS5NALG 1HS6NALG

Medium/Short 1, 2 7-8” 4-5” 10-12” 1HS3MDSH 1HS5MDSH 1HS6MDSH

Medium/Regular 1, 2 7-8” 4-5” 14-16” 1HS3MDRG 1HS5MDRG 1HS6MDRG

Medium/Long 1, 2 7-8” 4-5” 18-20” 1HS3MDLG 1HS5MDLG 1HS6MDLG

Medium/X-Long 1, 2 7-8” 4-5” 22-24” 1HS3MDXL 1HS5MDXL 1HS6MDXL

Medium/XX-Long 1, 2 7-8” 4-5” 26-28” 1HS3MDXX 1HS5MDXX 1HS6MDXX

Wide/Short 3, 4 9-10” 6-7” 10-12” 1HS3WDSH 1HS5WDSH DISCON

Wide/Medium 3, 4 9-10” 6-7” 14-16” 1HS3WDMD 1HS5WDMD 1HS6WDMD

Wide/Long 3, 4 9-10” 4.5-5” 18-20” 1HS3WDLG 1HS5WDLG 1HS6WDLG

Wide/X-Long 3, 4 9-10” 4.5-5” 22-24” 1HS3WDXL 1HS5WDXL 1HS6WDXL

Wide/XX-Long 3, 4 9-10” 4.5-5” 26-28” 1HS3WDXX 1HS5WDXX 1HS6WDXX

X-Wide/Short 5, 6 11-12” 7-8” 12-14” 1HS3EWSH 1HS5EWSH N/A

X-Wide/Medium 5, 6 11-12” 7-8” 16-18” 1HS3EWMD 1HS5EWMD N/A




PR

OS

TH

ET

ICS

SYME’S and PARTIAL FOOT SOCKS

c. Super-Sock® Syme’s

Knit-Rite’s 100% virgin wool prosthetic sock for Syme’s amputees. Sold each.

Super-Sock®

Size Top x Ankle x Ball Ply 18” Length 20” Length 22” Length 24” Length

0 6” x 3” x 3.5” 3 1S13A018 1S13A020 1S13A022 1S13A024

5 1S15A018 1S15A020 1S15A022 1S15A024

0 6” x 3” x 4” 3 1S13B018 1S13B020 1S13B022 1S13B024

5 1S15B018 1S15B020 1S15B022 1S15B024

0 6” x 3.5” x 4” 3 1S13C018 1S13C020 1S13C022 1S13C024

5 1S15C018 1S15C020 1S15C022 1S15C024

0 6” x 3.5” x 4.5” 3 1S13D018 1S13D020 1S13D022 1S13D024

5 1S15D018 1S15D020 1S15D022 1S15D024

1 7” x 3” x 3.5” 3 1S13A118 1S13A120 1S13A122 1S13A124

5 1S15A118 1S15A120 1S15A122 1S15A124

1 7” x 3” x 4” 3 1S13B118 1S13B120 1S13B122 1S13B124

5 1S15B118 1S15B120 1S15B122 1S15B124

1 7” x 3.5” x 4” 3 1S13C118 1S13C120 1S13C122 1S13C124

5 1S15C118 1S15C120 1S15C122 1S15C124

1 7” x 3.5” x 4.5” 3 1S13D118 1S13D120 1S13D122 1S13D124

5 1S15D118 1S15D120 1S15D122 1S15D124


d. Soft-Sock® Syme’s

Knit-Rite’s CoolMax®/Lycra® prosthetic sock for Syme’s amputees. Sold each.

Soft-Sock®

Size Top x Ankle x Ball Ply 18” Length 20” Length 22” Length 24” Length

0 6” x 3” x 3.5” 3 1SP3A018 1SP3A020 1SP3A022 1SP3A024

5 1SP5A018 1SP5A020 1SP5A022 1SP5A024

1 7” x 4” x 4.5” 3 1SP3E118 1SP3E120 1SP3E122 1SP3E124

5 1SP5E118 1SP5E120 1SP5E122 1SP5E124

1 7” x 5” x 5.5” 3 1SP3H118 1SP3H120 1SP3H122 1SP3H124

5 1SP5H118 1SP5H120 1SP5H122 1SP5H124


e. Syme’s Gel Liner

CoolMax® fabric with 3mm vitamin enriched gel to prevent abrasion and skin breakdown. One size fits most.

Sold each. From Silipos.

Length Gel Length Distal Circ Prox Circ Item No.ò

16.5” (42cm) 15” (38cm) 10-14” (25-37cm) 15-20” (38-51cm) 1302



PR

OS

TH

ET

ICS

SYME’S and PARTIAL FOOT SOCKS — Continued

a. SmartKnit® Partial Foot Sock

No heel assures custom fit. For all levels of partial foot amputation. Completely seamless. Knit with core-spun

yarns. Multi-directional stretch for smooth, comfortable fit. Breathable, washable CoolMax®/Lycra in white

and X-Static® in black. Wicks moisture from the skin. Anti-microbial to inhibit odor in the sock. Non-binding

Halo™ top. One size fits all. 3.5” width. 14.5” length. Sold each. From Knit-Rite.

Color White Black

Item No. ð 84107 84707

b. Partial Foot Sock with Gel

For use with transmetatarsal amputees, this sock features elastic conforming CoolMax® fabric. Gel covers

amputation site. May be used with foot orthosis or shoe with filler. Sold each. From Silipos.

Size Regular X-Long

Item No. ð 10805-SI 10815

HIP DISARTICULATION SOCKS

c. Hip Disarticulation Sock

Standard conventional unilateral style. Seamless design available in poly/X-Static®, acrylic/Lycra® and Soft-Sock®

fabric. Color-coded, turned over hem at waist. 3” leg extension. Non-standard sizing, hemi-pelvectomy, fly

opening available special order. Sold each. From Knit-Rite.

Flat width measurement should be 10-20% less than half the actual circumference of hip.

Flat Width Length 3 Ply 2 Ply 3 Ply 3 Ply 5 Ply X-Static® Acrylic/Lycra® Acrylic/Lycra® Soft-Sock® Soft-Sock®

8” (20cm) 12” (30cm) 1HX30812 N/A N/A N/A N/A

10” (25cm) 12” (30cm) 1HX31012 N/A N/A N/A N/A

12” (30cm) 14” (36cm) 1HX31214 N/A N/A N/A N/A

12” (30cm) 16” (40cm) N/A 1HL21216 1HL31216 1HP31216 1HP51216

13” (33cm) 14” (36cm) 1HX31314 N/A N/A N/A N/A

13” (33cm) 16” (40cm) N/A 1HL21316 1HL31316 1HP31316 1HP51316

14” (36cm) 14” (36cm) 1HX31414 N/A N/A N/A N/A

14” (36cm) 16” (40cm) N/A 1HL21416 1HL31416 1HP31416 1HP51416

15” (38cm) 16” (40cm) 1HX31516 1HL21516 1HL31516 1HP31516 1HP51516

16” (40cm) 16” (40cm) 1HX31616 1HL21616 1HL31616 1HP31616 1HP51616

17” (44cm) 16” (40cm) 1HX31716 1HL21716 1HL31716 1HP31716 1HP51716

18” (46cm) 16” (40cm) N/A 1HL21816 1HL31816 1HP31816 1HP51816

19” (48cm) 16” (46cm) N/A 1HL21916 1HL31916 1HP31916 1HP51916

18” (46cm) 18” (46cm) 1HX31818 N/A N/A N/A N/A

19” (48cm) 18” (46cm) 1HX31918 N/A N/A N/A N/A




PR

OS

TH

ET

ICS

PROSTHETIC SOCK ACCESSORIES

d. KISS® Anti Fray Sock Iron-Ons

When using a sock with KISS® suspension systems, these iron-ons prevent fraying. Most socks are made with

reinforced distal holes, but KISS® also requires a reinforced proximal hole. Securely reinforce any hole you

cut in a sock, and eliminate fray with these Iron-Ons. 12 per package. From KISS®.

Item No. ð CMP17/A

COSMETIC STOCKINGS

e. Cosmetic Hose, Tube Style

No heel, tube design available in plain or elastic top in three BK and five AK lengths. Four colors. Heavy-duty

100% nylon construction. Uniformly controlled compression. Sold pair. From Comfort Products.

Plain Top Size Length Caucasian Hispanic Lt Negroid Dk Negroid

BK-1 22” 99BK161CP 99BK161HP 99BK161LP 99BK161DP



AK-0 36” 99AK140CP 99AK140HP 99AK140LP 99AK140DP





Elastic Top Size Length Caucasian Hispanic Lt Negroid Dk Negroid

BK-1 22” 99BK161CE 99BK161HE 99BK161LE 99BK161DE



AK-0 36” 99AK140CE 99AK140HE 99AK140LE 99AK140DE







PR

OS

TH

ET

ICS

COSMETIC STOCKINGS — Continued

a. Cosmetic Hose with Knitted Heel

Knitted heel design for a more intimate fit and reduced wrinkling at ankle. Knit stretch top in three BK lengths

and elastic top in five AK lengths. Four colors. Heavy-duty 100% nylon construction. Uniformly controlled

compression. Sold pair. From Comfort Products.

Plain Top Size Length Caucasian Hispanic Lt Negroid Dk Negroid

BK-1 22” 98BHT161C 98BHT161H 98BHT161L 98BHT161D



Elastic Top Size Length Caucasian Hispanic Lt Negroid Dk Negroid

AK-0 36” 98AHT140C 98AHT140H 98AHT140L 98AHT140D





b. Cosmetic Underhose

100% stretch nylon. AK/BK length. Dusk or brown. Sold pair. From Knit-Rite.

Size Small Medium Large X-Large XL/X-Long

Foot Length 21.5-24cm 24-26.5cm 26.5-29cm 29-32cm 29-32cm

Dusk 2H7390SM 2H7390MD 2H7390LG 2H7390XL 2H7390LL

Brown 2H7391SM 2H7391MD 2H7391LG 2H7391XL 2H7391LL

c. Knee Length Cosmetic Hose

100% stretch nylon. Knee length. Dusk or brown. Sold pair. From Knit-Rite.

Size Small Large King Size

Foot Length 21.5-25cm 26.5-30.5” 30.5-33cm

Dusk 2H7395SM 2H7395LG 2H7395KG

Brown 2H7396SM 2H7396LG 2H7396KG

d. AK Cosmetic Stockings

100% nylon. Features elasticized silicone gripper cuff. Color-coded thread sizing. Sold pair. From Knit-Rite.

Size Size 0 Size I Size II Size III Size IV

Color-Code Natural Green Black Pink Blue

Top Circumference 36cm 36cm 38cm 40cm 40cm

Leg Length 72cm 76cm 78cm 80cm 90cm

Foot Length 20cm 20cm 20.5cm 21cm 22cm

Caucasian 2HB9B140 2HB9B141 2HB9B142 2HB9B143 2HB9B144

Negroid 2HR9B140 2HR9B141 2HR9B142 2HR9B143 2HR9B144

Hispanic 2HL9B140 2HL9B141 2HL9B142 2HL9B143 2HL9B144



PR

OS

TH

ET

ICS

e. BK Cosmetic Stockings

100% nylon. Features elasticized silicone gripper cuff. Color-coded thread sizing. Sold pair. From Knit-Rite.

Size Size I Size II Size III

Color-Code Green Black Pink

Top Circumference 25cm 25cm 27cm

Leg Length 36cm 41cm 46cm

Foot Length 20cm 21cm 22cm

Caucasian 2HB9B161 2HB9B162 2HB9B163

Negroid 2HR9B161 2HR9B162 2HR9B163

Hispanic 2HL9B161 2HL9B162 2HL9B163

f. Proximal Connection Piece

Used to hold the foam cover to the AK socket. Color-coded thread sizing. Caucasian color. Sold each. From

Knit-Rite.

Size Size I Size II Size III

Color-Code Green Black Pink

Top Circumference 28cm 34cm 40cm

Item No. ð 2HB9B151 2HB9B152 2HB9B153

FIVE FEET. ONE LINE UP.NO COINCIDENCE.

Rounding up the usual suspects…

20

19

1817

16

15

14

13

12

11

10

98

76

5

4

3

2

1

0

8

7

6

5

4

3

2

1

0

INC

HE

SC

EN

TIM

ET

RE

S

3.5

2.8

7.1

SeattleTriumph

Seattle

Catalyst 9

SeattleEnergy

Seattle

Low Profile

Seattle

Kinetic

Product name Product No. Keel Category Size range Product weight Clearance Heel rise

Seattle Catalyst 9 SHF39x* 1 to 9 22-30 cm 493 g • 1.1 lb 18 cm • 7.1" Adjustable with heel wedges

Seattle Energy SEF19* 1 to 4 22-30 cm 330 g • 0.7 lb 9 cm • 3.5" 9.5 mm - 3/8"

Seattle LP SLP35x* 1 to 34

22-30 cm26-30 cm 400 g • 0.9 lb 9 cm • 3.5" 9.5 mm - 3/8"

Seattle Triumph STF19x* 2 to 5 22-30 cm 493 g • 1.1 lb 18 cm • 7.1" 9.5 mm - 3/8"

Seattle Kinetic SKF20x* 1 to 5 (bumper) 22-30 cm 495 g • 1.1 lb** 7 cm • 2.8" 9.5 mm - 3/8"

Product name Activity Weight limit Includes Warranty L-Code

Seattle Catalyst 9 Medium to high; K3-K4 166 kg • 366 lb Foot shell, Spectra® sock, shoe horn, 3 heel

wedgesKeel: 3 years Foot shell: 6 months L5987, L5986

Seattle Energy Medium; K3 136 kg • 300 lb Foot shell, spacer, male pyramid, Spectra® sock Keel: 2 years Foot shell: 6 months L5976

Seattle LP Medium to high; K3-K4 136 kg • 300 lb Foot shell, Spectra® sock, bearing kit Keel: 3 years

Foot shell: 6 months L5981, L5986

Seattle Triumph Medium to high; K3-K4 166 kg • 366 lb Foot shell, Spectra® sock Keel: 3 years

Foot shell: 6 months L5987, L5986

Seattle Kinetic Moderate activity; K2 166 kg • 366 lb Foot shell (non-removable), female foot adapter and 17" male-bonded pylon

Keel: 2 years Foot shell: 1 year L5972, L5986

*X is cosmesis color; 0 = Caucasian, 1 = Light Brown, 3 = Dark Brown **Size 25 with foot shell. All other weights are without foot shell.

www.trulife.com

Knit-Rite, Inc. is the world’s leading developer and manufacturer of innovative prosthetic and

orthotic textile products. Since 1923 we have worked with practitioners to advance textile

solutions that promote mobility, protection, and comfort for patients. With a variety of prosthetic

socks, sheaths, shrinkers, and lower extremity suspension products, Knit-Rite continues to innovate

products with patients’ needs in mind.

A/K

Co

mp

ress

og

rip

Sh

rink

erSi

lver

She

ath

Hug

ger

To

p S

oft

-So

ck®

wit

h 3

-D T

oe

Shap

e

X-W

oo

l®

Pro

sthe

tic

Sock

Line

r-Li

ner®

P

rost

heti

c So

ck

wit

h X

-STA

TIC

®

Spac

er S

ock

sSh

ort

y So

ft S

ock

®Po

wer

Bel

tS O L U T I O N S T H A T F I T P R O S T H E T I C T E X T I L E S

Pow

er P

ullT

M

Co

mp

ress

og

rip

®

B/K

Shr

inke

r

Soft Sock®

FOOT SYSTEMTM

FOOT SYSTEM

TM

from Emotis

from Emotis

from Emotis

from Emotis

from Emotis

from HosmerMICROPROCESSOR FOOT

from Emotis

A Foot for EvEry Activity & LocAtion

AD332/05-17-12

XD

XD

AD332 - Multi-Ad Cascade.indd 1 5/17/12 2:37 PM

Discover the ProAdvantage.

©2012 Cascade Orthopedic Supply, Inc. Patent pending. ProAdvantage® is a registered trademark of Cascade.

Attachment Kit 650

Lamination or Thermoplastic

Attachment Kit 600-AKT/P

Standard or with Titanium Pyramid

Attachment Kit 600

with improved airtight seal

Attachment Kit 200

Push Button, large

Attachment Kit 150

Push Button, small


8 0 8

Documents

Prosthetics Section