PROTECTIONS TUBING AND RECOILS - Boxco · (Tubes in polyamide 12 flexible grade) PAGE 18 PUR ... BRAKE (Black polyamide 12 tubes for brake and lubrication lines DIN 74324) PAGE 20

PROTECTIONS

TUBING AND RECOILS

PROTECTIONS

PROTECTIONS

TUBING AND RECOILS

INDEX

TEXSLEEVE ® PAGE 6(Textile sleeve in nylon)

TEXWRAP ® PAGE 7(Field assembling sleeve for medium high temperatures)

TEXSTRIP® PAGE 8(Self locking textile belts)

TEXLITE® PAGE 9(Textile sleeve in polyester)

TEXGUARD ® PAGE 10(Burst-resistant sleeve)

SHILTEK ® PAGE 11(Fiberglass, silicone coated sleeve)

SHILCUT® PAGE 12(Fiberglass cloth, silicone coated)

SHILTAPE ® PAGE 12(Fiberglass, silicone coated tape)

KOVERTEC PSA® PAGE 13(Antiabrasive, plastic spiral)

KOVERTEC HT® PAGE 14(Antiabrasive spiral for high temp.)

KOVERTEC HD® PAGE 15(Antiabrasive, plastic spiral for “Heavy duty” applications)

FLEXWRAP® PAGE 16(Flat spiral for light applications)

PA12 PAGE 18(Tubes in polyamide 12 flexible grade)

PUR PAGE 19(Tubes in polyurethane 98 SHORE A)

BRAKE PAGE 20(Black polyamide 12 tubes for brake and lubrication lines DIN 74324)

LDPE PAGE 21(Tubes in low density polyethylene)

PA6 PAGE 22(Tubes in polyamide 6)

SPIR PA PAGE 23(Recoils in polyamide 12)

SPIR PU PAGE 24(Recoils in PU)

MULTILAYER PAGE 25(Multilayer co-extruded tubes)

BUNDLE PAGE 25(Thermoplastic tubes protected by a pu or pe sleeve)

TUFT PAGE 26(Antistatic thermoplastic tubes for Tufting)

MAFLEX PAGE 26(Full core rods)

is available in the following range:

TEXSLEEVE ®

TEXTILE PROTECTIVE SLEEVEFOR HIGH PRESSURE FLEXIBLE HOSES

Texsleeve® is a continuous tubular sleeve made of polyamide fibers. Specially treated in order to withstand an abrasion resistance of over 200.000 cycles (according to ISO 6945).Texsleeve® is the perfect anti diffusion sleeve able to contain pin hole occurencies at high pressure.

Standard colour: Black - Other colours are available on request

Standard print: TEXSLEEVE Possibility of custom printing and screen-print in colours

Temperature range: -40°C to +100°C (-40°F to +212°F)

UV Resistance certified according to EN13758-1

MSHA approval for mining applica-tions n. IC207/01

Complies with Australian spec MDG-41

Complies with UN-EN 1501-1, EN 982, EN 3457

Part. Nr.

TEXS17TEXS20TEXS23TEXS25TEXS27TEXS31TEXS33TEXS36TEXS40TEXS44TEXS47TEXS53TEXS55TEXS60TEXS66TEXS73TEXS85TEXS93TEXS112TEXS127

Flat I.D. mm2731363942495254636974838694

104115133146176202

Round diametermm172023252731333640444753556066738593112127

Quantity per box m

500500400400300300300250250200200200200150150150100100100100

Availability

StockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStock

PACKAGING AND ACCESSORIESRolls of 50 meters.Special scissors available on request.

TEXSLEEVE ®

TEXSLEEVE ®

6

TEXWRAP ®

TEXTILE WRAPPING SLEEVE FIELD ASSEMBLING, RESISTANT TO OIL SPILLS, ABRASION AND HIGH TEMPERATURES

Texwrap® is a foldable sleeve made of polyamide fibers coated on one side with UV-resistant PU. The exclusive locking system, made of highly resistant VCO (Velcro) allows to obtain a tubular protection of endless length and easy to assemble.Texwrap® can be supplied in customized versions: cut to size and stitched, with the addition of eyelets and locking catch to improve tear resistance.



MSHA approval for mining applications n. IC207/02

Volume resistivity (applied voltage 500V) Ω. m 5,9.1012 according to CEI 15-23

Surface resistivity (applied voltage 500V) Ω. 1,4.1016 according to CEI 15-23

ACCESSORIESSpecial stainless steel scissors for sharp cut, on request.

TEXWRAP ®

Part. Nr.

TEXW-50TEXW-75

TEXW-100TEXW-125TEXW-150TEXW-175TEXW-200

Diametermm5075

100125150175200

Coil lenghtin m50505050505050

Quantityper box m

1501005050505050

Availability

StockStockStockStockStockStockStock

Other sizes and colours available on request.

is available in the following range:TEXWRAP ®

Special version with eyelets

Standard Version

7

TEXSTRIP ®

SELF LOCKING TEXTILE BELTS TO CONTAIN OR HANG MULTIPLE HOSES OR CABLES, ABRASION RESISTANT, FOR ASSEMBLING ON SITE

Texstrip® are made of polyamide fibers and stainless steel AISI 316 locking rings. They are designed for heavy duty industrial applications. They are easy to assemble and can be dismantled and reassembled more than one time.

Texstrip® are available in two versions, without eyelet or with eyelet, which offers a strong point of attachment to any part of the machinery.




PACKAGING AND DELIVERYPolyethylene bags.

TEXSTRIP ®

Other sizes available on request.

is available in the following range:TEXSTRIP ®

31-3347-4963-6779-8395-99

111-115127-131144-148160-164176-180192-196208-212

102152203254305356406457508560610660

TEX-04-SOTEX-06-SOTEX-08-SOTEX-10-SOTEX-12-SOTEX-14-SOTEX-16-SOTEX-18-SOTEX-20-SOTEX-22-SOTEX-24-SOTEX-26-SO

TEX-04-COTEX-06-COTEX-08-COTEX-10-COTEX-12-COTEX-14-COTEX-16-COTEX-18-COTEX-20-COTEX-20-COTEX-24-COTEX-26-CO

101010101010101010101010

Versions without eyelets and with eyelets TEX SO TEX CO

Approximatediameter of

the bundle mm

Circumferencemm

Part. Nr.without eyelet

Part. Nr.with eyelet

Piecesper bag

8


TEXLITE ®

ECONOMICAL AND VERSATILE SLEEVE FOR HIGH PRESSURE FLEXIBLE HOSES

Texlite® is a continuous tubular sleeve made of polyester fibers. Specially treated in order to withstand an abrasion resistance of over 200.000 cycles (according to ISO 6945).

Texlite® is a good anti diffusion sleeve and offers very good safety features at a more convenient price. Ideal solution on agricultural machinery.


Standard print: TEXLITEPossibility of custom printing and screen-print in colours


UV Resistance certified according to EN13758-1


Complies with UN-EN 1501-1, EN 982, EN 3457

Part. Nr. Flat I.D.mm

Round diametermm

Quantity perbox m

Availability

PACKAGING AND ACCESSORIESRolls of 50 meters.Special scissors available on request.

TEXLITE®

TEXLITE®

TEXL17TEXL20TEXL25TEXL31TEXL36TEXL40TEXL44TEXL53TEXL60TEXL66TEXL73TEXL85TEXL93

273139495763698394

104115133146

17202531364044536066738593

500500400300250250200200150150150100100

StockStockStockStockStockStockStockStockStockStockStockStockStock

9


TEXGUARD ®

THE ULTIMATE BURST RETAINER FOR TOTAL SAFETY AND PROTECTION

Part. Nr. Diametermm

Availability

Hose diameter Hose 1 SN Hose 2 SN Hose 4SP

ACCESSORIESSpecial stainless steel scissors for sharp cut, on request.

TEXGUARD ®

TEXGUARD®

TEXG20TEXG27TEXG40

202740

StockStockStock

DN6DN8DN10DN12DN16DN20DN25

TEXG20TEXG20TEXG27TEXG27TEXG27TEXG40TEXG40

TEXG20TEXG20TEXG27TEXG27TEXG27TEXG40TEXG40

--

TEXG27TEXG27TEXG40TEXG40

-

Hose match:

Texguard® is a double-layer tubular textile sleeve in continuous polyamide fibres : an inner sleeve of strong nylon and an outer sleeve of textured nylon specifically designed for high abrasion and weather resistance.

Burst rating: Pin hole test: 6 minutes at 350 bar (at a temperature of 120°C) Burst test: 350 bar (at a temperature of 120°C)




Abrasion resistance - complies with ISO 6945

Electrical conductivity - complies with ISO 8031

Complies with UNI-EN 1501-1, EN 982, EN 3457

10


SHILTEK ®

HOSE AND CABLE FIRE RESISTANT SLEEVE

Coils of 15 m, with maximum 1 join.Possibility of custom-branding and different lengths.

SHILTEK LG ®

SHILTEK®

Part. Nr. Diameter mm Quantity per box m

Coillenght m

Availability

SHL06SHL08SHL10SHL13SHL16SHL19SHL22SHL25SHL29SHL32SHL35SHL38SHL41SHL44SHL51SHL57SHL64SHL70SHL76SHL83SHL89SHL95SHL102

681013161922252932353841445157647076838995

102

1515151515151515151515151515151515151515151515

9090907575757560604545454530303030301515151515

StockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStockStock

Shiltek ® consists of a fiberglass braid, coated with a silicone rubber layer, compounded to assure compatibility to solvents and lubricants. Standard colour: Iron oxide red colour - Other colours are available on request

Standard print: SHILTEK Possibility of custom printing



Construction of the sleeve complies with SAE aerospace standard AS 1072 Type 2

Flame retardant according to AFNOR E48-084

11

SHILCUT ®

FIBERGLASS, SILICONE COATED CLOTH “FLAME CUTTING”

SHILCUT®

Part. Nr. Width mm Coil lenght in mm

is available in the following range:SHILTAPE ®

SHILTAPE ®

FIELD WRAPPING FIBERGLASS, SILICONE COATED TAPE

KT02512A1KT05012A1KT07512A1KT10012A1

255075

100

50505050

SHILTAPE®

Shilcut® is a fiberglass cloth coated on one side with silicone. Standard colour: Iron oxide red colour

Width: 1000 mm.

Weight: 3300 g/m2


Shiltape® is a fiberglass knitted, non adhesive ribbon coated on one side with high resistant silicone rubber. It can be manually wrapped around any diameter of hose or cable.

Standard colour: Iron oxide red colour


12


KOVERTEC PSA ®

THE GLOBAL PROTECTION FOR HIGH PRESSURE HOSES

KOVERTEC PSA ®

KOVERTEC PSA®

Part. Nr. Inside diameter (D) mm

Quantity per box m

Pitch(P) mm

Availablein dispenser

pack ofbelow specified

length

Availability

Dispenser pack

24 m24 m24 m24 m24 m24 m24 m12 m

PSA06MP06PSA06MP07PSA06MP09PSA13MP12PSA13MP16PSA16MP19PSA16MP25PSA16MP28PSA17MP35PSA20MP45PSA20MP47PSA35M65PSA35MP80PSA35MP90PSA50MP100PSA50MP140

6,357,59,512,71619

25,4283545

47,5658090

100140

6,356,356,3513131616161720203535355050

2402402402402402402401201206060362412126

On demandStockStockStockStockStockStockStockStockStockStockStockStockStockStockStock

Kovertec PSA® is a plastic protective spiral wrap made of Cellulose Acetate. Specially designed with a round shape, Kovertec PSA® offers the best protection even at the lowest bending radius.

Kovertec PSA® has a very good resistance to fuel, lubricant, mineral oil and water.


Temperature range: -20°C to +85°C (-4°F to +185°F) with peaks up to +95°C ( +203°F)

13


KOVERTEC HT ®

TERMOPLASTIC PROTECTIVE WRAPFOR HIGH TEMPERATURES

KOVERTEC HT®

KOVERTEC HT®

Part. Nr. Inside diameter (D) mm

Quantity per box m

Pitch(P) mm

Availability

PSHTAL05Z1PSHTAA05Z1PSHTAF05Z1PSHTAB05Z1PSHTAC05Z1PSHTAE05Z1PSHTAD05Z1PSHTAN05Z1PSHTAP05Z1

9,512,71619

25,428355060

6,91313161616163535

2402402402402401201206036

StockStockStockStockStockStockStock

On demandOn demand

Kovertec HT® is a plastic protective spiral wrap made of polyamide 12. Specially designed with a round shape, Kovertec HT® offers the best protection even at the lowest bending radius.

Kovertec HT® has a very good resistance to fuel, lubricant, mineral oil.


Temperature range: -40°C to +125°C (-40°F to +257°F) with peaks up to +140°C (+284°F)


14


KOVERTEC HD ®

HEAVY DUTY TERMOPLASTIC WRAP

KOVERTEC HD ®

KOVERTEC HD®

Part. Nr. Inside diam. (I.D.) mm

Outside diam. (O.D.) mm

Quantity per box m

Pitch(P) mm

Availability

PSP09MP09PSP12MP13PSP14MP16PSP21MP21PSP22MP27PSP24MP35PSP30MP43PSP37MP56PSP42MP66PSP45MP80

912,816

20,627

34,643,255,666,280,2

12162025324050637590

912

14,521,5222430374245

50505050505020202020

StockStockStockStockStockStockStockStockStockStock

PSP50MP99 99 110 50 12 StockPSP55MP113 113 125 55 12 Stock

Other sizes and colours available on request.

Kovertec HD® is the classic plastic protective spiral wrap made of HD PE. Shape is flat with smooth edges.

Kovertec HD® has a very good resistance to acids, oils and solvents.

Standard colours: Black and yellow - Other colours are available on request

Temperature range: -60°C to +60°C (-76°F to +140°F) with peaks up to +90°C ( +194°F)

15

Technical Specifications:

FLEXWRAP ®

LIGHT TERMOPLASTIC SPIRAL WRAP

FLEXWRAP®

FLEXWRAP®

Inside diameter (I.D.): from 3 to 25 mm (1/8” to 1”).Pitch, thickness and inside diameter will be according to customer’s specifications.

Standard section:

Flexwrap® is a thermoplastic, light, flat protective wrap. It is the ideal solution for bundling tubing or cables and to protect them from shocks and general rubbing.

Flexwrap® can be produced with different thermoplastic materials:

- Polyamide 12: for applications from -40°C +80°C with peaks at 100 °C (-40°F to +176°F with peaks at 212 °C)

- Polyamide 6: for applications from 20°C to +120°C (-4°F to +248°F)

- LDPE: for applications from -60°C to +60°C (-76°F to +140°F)

Product is manufactured only upon customer’s demand. Inside diameter size range: from 6 mm. to 25 mm.

Pitch and thickness according to customer’s specification.

16

TUBINGAND

RECOILS


TUBES IN POLYAMIDE 12 FLEXIBLE GRADE

Part. Nr. I.D.mm

O.D.mm

W.P.Bar

Bending Radius mm.

Weight per Coils of 100 m./ Kg.

Tolerances on I.D.: +/-0,1 mm.Tolerances on O.D.: Up to dia. 12 mm. +/-0,1 mm. Larger sizes +/-0,2

Pa 12 tube is also available in rigid and semi-rigid grades

Other colours and sizes are available on request – possibility of custom-marking

*coil of 50 m.

PA12

PA 12

TG5064TG5063TG5051TG5010TG5012TG5015TG5019TG5018TG5054TG5022TG5021TG5023TG5077TG5029*

22,73468

1098

1211121216

44568

101212121414151620

4024302518141117259

14141814

20202530406060758090859095

130

1,0000,7001,3001,7002,3003,0003,6005,2006,6004,3006,2006,7009,2006,000

Flexible tubing with good thermal features: it can be used up to 80°C with peaks at 100 °C and has a good impact resistance even at -40°C. Very good resistance to chemical agents. Water absorption and gas permeability are very low.Good elastic properties end resistant to abrasion. Internal surface is smooth permitting very good flow. All tubes are normally light and heat stabilised. For extended outdoor use we recommend a black tubing.

Our tubes are manufactured according to DIN 73378, DIN 74324.

Standard coil length: 100 m.Standard colours: Natural - Blue - Black For availability of other coil lengths or colours, please contact our sales department.

Main applications:Pneumatics, gas and fluid flow, lubrication and fuel lines

18


TUBES IN POLYURETHANE 98 SHORE A

Part. Nr. I.D.mm

O.D.mm

W.P.Bar

Bending Radius mm.


Tolerances on inside diameter: +/-0,1 mm.

Tolerances on outside diameter: up to dia. 8 +/-0,1 mm. Bigger sizes +/-0,15 mm.

Other colours and sizes are available on request - possibility of custom branding

PUR

PUR

PU5044PU5064PU5051PU5010PU5012PU5014PU5015PU5052PU5018

2,52346

5,5879

445688

101012

91010868586

101015182220252535

0,9501,1501,5501,9002,7003,3003,4504,9006,000

Very flexible tubing with good elastic properties even at low temperatures. Good chemical, abrasion and ageing resistance.

Temperature range: -40°C to + 60°C. We recommend a black tubing for outdoors applications. Standard product has a hardness of 98 SHORE A but we have the possibility to supply softer grades and special types for contact with water or flame retardant.

Standard coil length: 100 m.

Standard colour: Blue

For availability of other coil lengths or colours, please contact our sales department.

Main applications:Pneumatics and controls, robotics, agriculture, powder paints.

19


BLACK POLYAMIDE 12 TUBES FOR AIR BRAKE AND LUBRICATION LINES DIN 74324

Part. Nr. I.D.mm

O.D.mm

W.P.Bar

Bending Radius mm.


Tolerances on I.D.: +/-0,1 mm.

Tolerances on O.D.: Up to dia. 12 mm. +/-0,1 mm. Larger sizes +/-0,2

These tubes can be also available in rigid and semi-rigid grades

Colour is black - Other colours are available upon request

BRAKE

BRAKE

TG5064TG5010TG5139TG5012TG5111TG5341TG5015TG5052TG5123TG5019TG5018TG5054TG5022TG5021TG5023TG5072TG5077TG5029*

243654876

1098

121112111216

466888

101010121212141414151620

4025401828401422301117259

1415171814

20302540403060605560758090859011095

130

1,0001,7002,2002,3003,2003,9003,0004,1005,2003,6005,2006,6004,3006,2006,7008,4009,2006,000

*coil of 50 m.

Tubing in Pa 12 produced according to DIN 73378 and DIN 74324. Specifically indicated for automotive application, including air brake and lubrication lines for trucks and vehicles in general.

Temperature range: -40 to + 80°C with peaks at 100°C It has a good resistance to chemical agents, very low water absorption and gas permeability.Good elastic properties and resistant to abrasion. Light and heat stabilised.

Standard product is in flexible grade but there are also rigid and semi-rigid grades in relation to the desired flexibility and pressure rating.


Standard colour: Black


Main applications:Pneumatic brake lines, lubrication and fuel lines.

20


TUBES IN LOW DENSITY POLYETHYLENE

Part. Nr. I.D.mm

O.D.mm

W.P.Bar

Bending Radius mm.


Tolerances on I.D.: +/-0,1 mm.

Tolerances on O.D.: up to dia. 8 +/-0,1 mm. Larger sizes +/-0,2 mm.

Other colours and sizes are available on request - possibility of custom-marking

LDPE

LDPE

HP5010HP5012HP5015HP5019

468

10

68

1012

10976

36486075

1,5002,1002,7003,300

Flexible and economical tubing for low pressure and temperature with good resistance to chemicals and solvents. Very good dimensional stability and almost no water absorption.

Temperature range: -60°C to + 60°C.

Material is FDA approved and can be used in contact with food and beverages. For applications outdoors we recommend the use of a black tubing.


Standard colour: Natural


Main applications:Pneumatics and instrumentation, beverages, cable guides.

21


PA6 TUBES IN POLYAMIDE 6 “NYLON”

Part. Nr. I.D.mm

O.D.mm

W.P.Bar

Bending Radius mm.


Tolerance on I.D.: +/-0,1 mm.

Tolerance on O.D.: +/-0,1 mm.

Natural colour. Other colours and sizes are available on request - possibility of custom-marking

PA6

PA6

T45010T45012T45015T45019

468

10

68

1012

33241815

456580

100

1,8002,5003,2003,750

Semi-rigid tubing with high mechanical features. Excellent resistance to shock and abrasion.Pa 6 absorbs more humidity than Pa 12 and this makes it more flexible in time. It’s light and has very good chemical resistance.In humid environment the product can develop anti-static properties.

There is a possibility of having more flexible grades of Pa 6 by adding plasticizers in order to achieve a smaller bending radius.

Working temperature range is -20°C up to +85°C.

Standard coil length: 100 m.Standard colour: Natural


Main applications: Cable controls and sleeving in automotive applications. Pneumatics, lubrication.

22


RECOILS IN POLYAMIDE 12

Part. Nr. I.D.mm

O.D.mm

Length in mt

I.D. of coils mm

Quantity for box

Colours

Colour chart: B=blu

Other colours, sizes and lengths are available on request - possibility of custom-marking

SPIR PA

SPIR PA

S1XX5063W005896S1XX5010W005896S1XX5012W005896S1XX5015W005896S1XX5019W005896

2,7468

10

468

1012

3030303030

40607090

120

4020201010

BBBBB

Recoiled version of the standard Pa 12 tubing. In additional to the standard features of Pa 12, the elastic recoiling allows the tube to be self storing and therefore to save a lot of room at working stations.

Temperature range: from -40°C up to +80°C with peaks at 100°C

Standard version is 30 meters (linear length of tubing) without tails

Standard colour: Blue For customized versions with different lengths and axial or radial ends, or for other colours please contact our sales department.

Main applications:Air distribution lines with pneumatic tools, spray guns and compressors.

23


RECOILS IN PU

Part. Nr. I.D.mm

O.D.mm

Length in mt

I.D. of coil mm

Quantity for box

Colours

Colour chart: B=blue Y=yellow.

Other colours, sizes and lengths are available on request - possibility of custom-marking.

SPIR PU

SPIR PU

SECC5111C5SECC5111E0SECC5111F0SECC5111H5SECC5111K0SECC5111M5SECC5287C5SECC5287F0SECC5287F5SECC5287K0SECC5287ECSECC5054C5SECC5054F0SECC5054H5SECC5054K0SECC5054O0SECC5480C5SECC5480F0SECC5480H5SECC5480K0SECC5480O0

555555

6,56,56,56,56,5

88888

1111111111

888888

101010101012121212121616161616

2,545

7,510

12,52,5

57,51015

2,55

7,51015

2,55

7,51015

252525252525303030303040404040407070707070

402020202020402020202040202020204040202020

B-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-YB-Y

Made with a special water and bacteria resistant type of PU tubing, these self storing recoils are very good in contact with Ozone and oxidation.

Max working pressure at room temperature is 10 Bar.

Temperature range: from -40°C up to + 60°C.

Standard version of all articles has axial tails of 100 and 500 mm.

Standard colour: Blue and Yellow

For customized versions with different lengths and radial ends, or for other colours please contact our sales department.

Main applications:Air distribution lines with pneumatic tools, spray guns for powder painting, gardening, car washing equipments.

24

MULTILAYER CO-EXTRUDED TUBES

MULTILAYER

BUNDLE THERMOPLASTIC TUBES PROTECTED BY

A PU OR PE SLEEVE

BUNDLE

Smart Protections has the technology to manufacture tubing with different layers (up to 5 layers) providing a combination of different materials with their specific properties to each component layer in the same tube.

This product is made upon customer’s specifications depending on the application.Many different combinations of polymers are possible

Please contact our sales department for enquiries

Smart Protections manufactures small bundles of tubing with standard configurations of 2 or 3Tubes (in Pa 12 or LDPE) in a PU or LDPE jacket.

General applications in greasing equipments for lubrication or in welding equipments.

This product is made upon customer’s specifications depending on the application.Other materials and configurations are possible


25

TUFT ANTISTATIC THERMOPLASTIC TUBES FOT TUFTING

TUFT

MAFLEX FULL CORE RODS

MAFLEX

Smart Protections’ TUFT tubing combines excellent anti-static properties with high friction resistance Leading every single yarn from its reel on the creel onto its needle on the tufting loom, this product is the best solution for producers of “tufted” technical fabrics including floor carpets, bathroom and kitchen mats, doormats and man-made grass.

Standard sizes: 6x8 - 8x10 - 10x12 in natural colour


MAFLEX indicates Smart Protections’ productions of:- Full cores in various materials such as polyester, polyamide and polypropylene, mainly used as mandrels in the production cycle of rubber hoses.

- Tubing with small ID in polyester, POM and polyethylene or polypropylene for the chains of conveyor belts in the packaging sector

These products are made upon customer’s specifications depending on the application.


26

SMART PROTECTIONS

SMART PROTECTIONS SrlBorn as a “spin off” of an historical Italian manufacturer, leader in the extrusion of thermoplastic tubing and owned by a Canadian Group, Smart Protections started its manufacturing operations in March 2015 and moved to its current location in January 2016. Smart Protections is a leading company in manufacturing high technical thermoplastic extrusion products & hydraulic protections. The technical background, the built-in know-how acquired by Smart Protections, with particular focus to quality, manufacturing capability and internal R&D testing lab, are some of the strengths of this “aged” startup. Internal laboratory, computer aided tests and a real-time product and process control, assure the compliance with the main national and international standards, offering to the End Users the best available solutions to Customer's requirements.

OUR MISSION: To become one of the market leaders in extruded thermoplastic and protection products within the Hydraulic & Fluid Power Market. Smart Protections constant focus is to meet Customers’ needs in a very unique and customized manner through a continuous information exchange and whenever possible personalized services. Our strong commitment in Research and Development is to better help the market to develop new products.

SMART PROTECTIONSis operating with a quality system ISO 9001

CONTACT& INFO

SMART PROTECTIONS srl

Via Montorfano 6622032 - Albese con Cassano (CO) - Italy

Tel. (++39) 031 622602

Email: [email protected]

www.smartprotections.com Editi

on 0

4/20

17

Documents

PROTECTIONS TUBING AND RECOILS - Boxco · (Tubes in polyamide 12 flexible grade) PAGE 18 PUR ... BRAKE (Black polyamide 12 tubes for brake and lubrication lines DIN 74324) PAGE 20