Pso Lubricants

OILS

APPLICATIONSPSO CNG oil is designed for naturally aspiratedor turbocharged vehicles operating undermoderate to severe working conditions.

BENEFITS● PSO CNG oil provides extra protection to

engine parts against high temperature foundin combustion chambers.

● PSO CNG oil is formulated with specialantioxidant additive to enhance engine lifeand increase oil drain intervals.

● Equally beneficial for gasoline engines.● Improved piston and ring groove deposit

control, oil consumption control and reducedwear.

PERFORMANCE STANDARDS

SAE 20W-50API SF/CD

PSO CNG OIL

DESCRIPTIONPSO CNG Oil is a multi-grade, high performance engine oil specially formulated to meet therequirement of CNG operated automobiles.

PSO CNG Oil is blended with specially selected additive system and high quality paraffinic basestocks to withstand very high temperature found in CNG engine’s combustion chamber. This oil isdesigned to give excellent performance for a long period under severe operating conditions.

TYPICAL DATASAE

PSO CNG Oil 20W-50

Kinematic Viscosity@100°C, cSt ASTM D445 19.3

Viscosity IndexASTM D2270 122

Flash Point (COC), °CASTM D92 232

Pour Point, °CASTM D97 -18

Total Base Number,mgKOH/g ASTM D2896 7.9

Sulphated Ash % WtASTM D874 0.73

These typical characteristics are of existing production. The future production will conform to PSO blending specificationshence any variation in these characteristics will not effect the product performance.

OILS

01

PSO CNG PLUS OILExtra Protection Against High Temperature

APPLICATIONSPSO CNG Plus is designed for naturally aspiratedor turbo charged vehicles operating undermoderate to severe working and load conditions.

BENEFITS● As CNG is a dry fuel hence PSO CNG

PLUS provides appropriate lubrication tothe valve seat and protects against valverecession.

● PSO CNG Plus provides extra protection,oxidation stability and long service life ofengine parts against high temperaturefound in CNG fuelled combustion chamber.

● PSO CNG Plus is formulated with specialantioxidant additive to enhance engine lifeand increase oil drain interval and reducesludge formation.

● Equally suited to both CNG and gasolineengines.

● Provides improved protection against pistonand ring groove deposit control, oilconsumption control and wear.

The values mentioned are typical dependingupon the quality of the base oil available andcannot be used to reject the product.

However these properties can be altered tomeet the specific requirement of the process/ equipment


SAE 20W-50API SG/CD

DESCRIPTIONPSO CNG Plus is a multi-grade advanced version of CNG engine oil series. It is a highperformance engine oil designed to combat with high combustion temperature of CNG fueloperated engines. It provides optimum protection against oxidation and improves drain intervals.

PSO CNG Plus is developed with selected additives component technology and high qualityparaffinic base stocks to withstand very high temperatures found in CNG engine’s combustionchamber and ensures excellent engine performance under all climatic conditions. This oil isdesigned to give excellent performance for a long period under severe operating conditions.


SAEPSO CNG Plus Oil 20W-50







TYPICAL DATA

OILS

02

APPLICATIONSPSO Carient Ultra is recommended speciallyfor high performance multi-valve engines whereit will provide improved engine efficiencyresulting in more power and improved fueleconomy. Even in standard older engines,PSO Carient Ultra provides extra protection athigh operating temperatures. These featuresensure maximum protection even for enginesoperating in hot climates.

BENEFITS● Increased protection levels.● Improved anti-wear control, specially in

high performance engines.● Greater resistance to oxidation, which is

important for engines operating at severehigh temperatures in hot climates.

● Protects against soot, varnish, sludgeformation, acid and corrosion.

● Improved oil pressure and oil consumption.


SAE 20W-50API SJ/CF

PSO CARIENT ULTRAUltimate Engine Protection

DESCRIPTIONPSO Carient Ultra is a super high technology multi-grade engine oil specially designed for usein all passenger car engines, diesel and turbocharged units. The SAE 20W-50 viscosity rangecombined with API SJ/CF performance rating of PSO Carient Ultra ensures increased protectionfor mix fleet operation.


PSO Carient Ultra SAE20W - 50







TYPICAL DATA

OILS

03

APPLICATIONSRecommended for use in passenger carengines including gasoline and turbochargeddiesel engines. The SAE 20W-50 viscosityrange of PSO Carient Plus ensures rapidcirculation and easy cranking on start-up plusextra protection at high operating temperature.

BENEFITS● Improved anti-wear control, specially in

high performance engines.● Increased engine deposit control.● Improved high temperature oxidation

control, which is important for enginesoperation at severe high temperatures inhot climates.

● Improved protection against rust corrosion.● Improved protection during start-up.● Improved control of volatility and oil

consumption.


SAE 20W-50API SG/CDUS MIL 2104EUS MIL 46152DCCMC G-4JAPANESE SE

PSO CARIENT PLUSSuperior Performance You Can Feel

DESCRIPTIONPSO CARIENT Plus is a superior multi-grade engine oil formulated to meet the requirements ofcar engines requiring an API SG/CD performance standard operating over wide temperature range.

PSO Carient Plus SAE20W-50








TYPICAL DATA

OILS

04

APPLICATIONSIt is designed to meet the requirements ofgasoline and diesel engine manufacturers. Itis an ideal lubricant to be used in the mix fleetof vehicles.

BENEFITS● Good protection during start-up.● High temperature protection specially in

hot climate.● Protects against soot, varnish, sludge

formation, acid and corrosion.● Improved oil consumption control compared

to a mono-grade.


SAE 40 & 20W-50API SF/CCUS MIL 2104EUS MIL 46152DCCMC G-2JAPANESE SE

PSO CARIENT SUPERProven Protection for Car Engines

DESCRIPTIONPSO CARIENT Super is specially designed for use in passenger car engines including gasolineor diesel units. It is blended with high viscosity index mineral base stocks and selected additivessystem.

The SAE 20W-50 viscosity range of PSO CARIENT Super ensures rapid circulation andprotection at high operating temperatures.

PSO Carient Super SAE SAE40 20-W50

Kinematic Viscosity@100°C, cStASTM D445 14.6 19.34

Viscosity IndexASTM D2270 99 124

Flash Point (COC), °CASTM D92 240 234

Pour Point, °CASTM D97 -6 -18

Total Base Number,mgKOH/gASTM D2896 5.1 5.1

Sulphated Ash % WtASTM D874 0.5 0.5


TYPICAL DATA

OILS

05

APPLICATIONSIt is designed to meet the requirements ofgasoline and diesel engine manufacturers. Anideal lubricant to be used in the mix fleet ofvehicles.

BENEFITS● Good protection during start-up.● High temperature protection specially in

hot climate.● Protects against soot, varnish, sludge

formation, acid and corrosion.● Improved oil consumption control compared

to a mono-grade.


SAE 40 & 20W-50API SE/CCUS MIL 2104EUS MIL 46152DCCMC G-2JAPANESE SE

PSO CARIENT ADVANCEAll Season Multigrade Engine Oil

DESCRIPTIONPSO CARIENT Advance is specially designed for use in passenger car engines includinggasoline or diesel units. It is blended with high viscosity index mineral base stocks and selectedadditives system.

The SAE 20W-50 viscosity range of PSO CARIENT Advance ensures rapid circulation andprotection at high operating temperatures.

PSO Carient Advance SAE SAE40 20-W50






Sulphated Ash % WtASTM D874 0.5 0.5


TYPICAL DATA

OILS

06

APPLICATIONSPSO Carient Extra oil ranges of engine oilsare available in five mono-grades and versions.These have been specially designed for petrolengines operating under severe conditions.

BENEFITS● Provides efficient performance over a wide

range of operating circumstances.● Excellent control of oxidation, corrosion,

wears and oil consumption.● Longer drain interval than SC/CC oils


SAE 10,20,30,40,50API SD/CCUS MIL 2104B

PSO CARIENT EXTRACar Engine Protector

DESCRIPTIONThese are high quality mineral based engine oils designed for use in naturally aspirated4-stroke gasoline and diesel engines. These are fortified with specially selected additives, whichprovide a high rate of detergency, resistance to oxidation, rust and anti-wear characteristics.

PSO Carient Extra SAE 10 SAE 20 SAE 30 SAE 40 SAE 50

Kinematic Viscosity @100°C, cStASTM D445 6.1 9.2 10.9 14.8 19.5

Viscosity IndexASTM D2270 100 100 100 100 100

Flash Point (COC), °C ASTM D92 204 220 230 240 245

Pour Point, °CASTM D97 -25 -6 -6 -6 -6

Total Base Number, mgKOH/gASTM D2896 4.1 4.1 4.1 4.1 4.1

Sulphated Ash, wt%ASTM D874 0.37 0.37 0.37 0.37 0.37


TYPICAL DATA

OILS

07

APPLICATIONSThe PSO Carient ranged of oils are availablein five versions, and have been speciallydesigned for mixed fleet operation underarduous conditions.

These oils meet API service SC/CC as well asMIL-L-2104B standards and are notrecommended for super-charged engineswhere the manufacturers specify a lubricantto meet API service CD or MIL-L-2104Cperformance standards.

BENEFITS● Different viscosity grades are applicable

for wide range of operating temperatures.● Excellent control of oxidation, corrosion

and wear.● Controls oil consumption


SAE 10,20,30,40,50API SC/CCUS MIL 2104B

PSO CARIENTMotor Engine Oil

DESCRIPTIONPSO Carient series are formulated from good quality base oils which incorporate a balancedadditive package to meet the demands of both diesel and petrol engine vehicles used undermoderate to severe service conditions.

PSO Carient SAE 10 SAE 20 SAE 30 SAE 40 SAE 50

Kinematic Viscosity @100°C, cStASTM D445 6 9.0 10.85 14.28 19.5


Flash Point (COC), °C ASTM D92 205 220 230 240 245


Total Base Number, mgKOH/gASTM D2896 4 4 4 4 4

Sulphated Ash, wt%ASTM D874 0.3 0.3 0.3 0.3 0.3


TYPICAL DATA

OILS

08

APPLICATIONSPSO Flushing oil is suitable for flushing andcleaning of engine crankcase and othermachines prior to filling a new oil.

BENEFITS● PSO Flushing oil offers good cleaning,

flushing of engines / machine systems.


ISOVG 20

PSO FLUSHING OIL

DESCRIPTIONPSO Flushing oil is formulated from light viscosity good quality mineral oil.

ISOVGPSO Flushing Oil 20





TYPICAL DATA

OILS

09

APPLICATIONSThe wide range of application makes it theideal choice for mixed fleet operators where itmay be used in most cars, trucks, 4WD, busesplus many off highway vehicles and plantsengines.

The SAE 15W-40 viscosity range of PSO TurboEngine Lube ensures rapid circulation andeasy cranking on start-up from cold, plusimproved protection at high operatingtemperature. Other features include improvedoil consumption control and reduced enginewear. These features ensure maximumprotection even for engines operating in hotdusty climates.

BENEFITS● Increased engine power retention and fuel

efficiency.● Longer engine life, longer oil service life

and reduced operating costs.

● Longer engine life and increased enginepower retention.

● Longer component and turbocharger life.● Improved engine protection, increasing

component life, reducing costs and reducingoil top-up.


API CD/SE, SG/CE/CF-4US MIL 2104E

PSO TURBO ENGINE LUBE15W-40

DESCRIPTIONPSO Turbo Engine Lube 15W/40 is a high performance diesel engine oil specially designedfor use in heavy duty diesel engines. It is suitable for use in gasoline and diesel 4-stroke enginesincluding turbocharged units.

PSO Turbo Engine Lube 15W-40

Kinematic Viscosity@ 00 °C, cSt 16.0(ASTM D445)

Viscosity Index(ASTM D2270) 135

Flash Point (COC), °C(ASTM D92) 215

Pour Point, °C(ASTM D97) -23

Total Base Number, mg KOH/g(ASTM D2896) 12

TYPICAL DATA


OILS

10

APPLICATIONSDEO 9000 has been developed to meet northAmerican and European OEM specificationsas well as API CI-4, ACEA E3/E5/E7 and globalDH-1 specifications.

PSO DEO 9000 can also be used in passengercars engines requiring API SL or ACEAA3/B3/B4 category products.

PSO DEO 9000 is also recommended for widerange of construction, agricultural equipments& several farm machineries, which requirestop-start service and provide protection againstwear of bearing and deposit formation evenunder high/low load conditions.

BENEFITS● Advance SAE 15W-40 formula meets the

engine oil requirement of newly designedlow emission EGR engines as well as olderengines reducing the need for additionaloil in the fleet.

● Developed for diesel engines and designedto provide optimum protection with reducedrisk of cylinder bore polishing.

● Reduced compression loss and blow-by,resulting in improved oil consumptioncontrol plus longer oil and engine life.

● Extended drain capabilities demonstratedby meeting the requirement of API CI-4,CH-4, Mack EO-M plus, Cummins20071/6/8, Volvo VDS-3 and MB 228.3allow engine operator maximum drainflexibility.

● Suitable for a wide variety of engines,excellent for operators of mixed fleets.

● Grade rationalization reduces the inventorycost and space allocation plus reduced riskof incorrect applications.


SAE 15W-40API CI-4/SLACEA E3-96#4/E7-04/E5-02Global DHD-1Volvo VDS-2/VDS-3VW 501/5 QualityCummins 20071/76/78Cummins 20072/77Mack EO-M, EO-M PlusMBp 228.3 (PA), MAN M3275(PA)ACEA A3-02/B3-98 #2/B4-02JASO DH-I (Quality)

PSO DEO 9000Low Emission High Performance Diesel Engine Oil

DESCRIPTIONPSO DEO 9000 is a heavy-duty diesel engine oil based on the modern additive componenttechnology for longer oil and engine life in newly designed EGR, turbo and non- turbo chargedengines. It is available in SAE viscosity grade 15W-40.

PSO DEO 9000 SAE15W-40

Kinematic Viscosity@100°C, cStASTM D445 14.3




Total Base Number,mgKOH/gASTM D2896 10.1

Sulphated Ash, wt%ASTM D874 1.2


TYPICAL DATA

OILS

11

APPLICATIONSPSO DEO 8000 is recommended for on or off-road which means that you need only one oilfor all your engines. As an essential part of theperformance of PSO DEO 8000, an extensivetesting is carried out globally in road transportoperations conforming to American, European,and Japanese engines (turbocharged andnaturally aspirated)

PSO DEO 8000 is also recommended for widerange of construction, agricultural equipmentsand several farm machineries, which requirestop-start service and provide protection againstwear of bearing and deposit formation evenunder high load/low load conditions.

BENEFITS● Developed for diesel engines and designed

to provide optimum protection with reducedrisk of cylinder bore polishing.

● Reduced compression loss and blow-by,resulting in improved oil consumptioncontrol plus longer oil life and longer enginelife.

● Protects against piston and combustionchamber deposits.

● Increased engine power retention and fuelefficiency.

● Suitable for a wide variety of engines,excellent for operators of mixed fleets.

● Grade rationalisation giving reduced oilstocks, costs and space allocation plusreduced risk of incorrect applications.

● Reduced operating costs associated withfewer oil changes and less downtime.


SAE 15W-40 & 20W-50API CH-4/SGMB 228.3Volvo VDS-3Cummins 20072/7

PSO DEO 8000Ultimate Protection for all Diesel Engines

DESCRIPTIONPSO DEO 8000 is (AHDDEO) Advanced Heavy-Duty Diesel Engine Oil based on the modernadditive component technology designed for use as mixed fleet automotive diesel engine oil& for high-speed turbocharged diesel engines. Its uniqueness is a combination of highlyrefined hydro cracked base oils & carefully selected additives to give superior engine protectionagainst soot & sludge.

PSO DEO 8000 offers a wide range of applications that make it an excellent choice for mixedfleet operators where it may be used in cars, trucks, 4WD, buses plus many off-highway vehiclesand plant engines.

PSO DEO 8000 SAE SAE15W-40 20W-50






Sulphated Ash, wt%ASTM D874 1.12 1.16


TYPICAL DATA

OILS

12

APPLICATIONSBlended to provide outstanding lubrication inall 4-Stroke heavy duty diesel engines ofEuropean, American and Japanese origin.

PSO DEO 7000 is particularly suited for usein Road Transport & Construction (CRT)applications and is endorsed by a wide rangeof truck and engine makers.

Constant high speed or stop-start duty on oroff-road under the most arduous conditions.

PSO DEO 7000 is recommended for use in awide range of construction equipment andagricultural equipment applications, where fuelsulphur levels up to 1% may be encountered.

BENEFITS● Outstanding thermal stability and oil

oxidation resistance to maintain highstandard of piston cleanliness.

● Overall engine cleanliness contributes tolow engine wear, longer component life,maintenance of power output, moreoperational stability and lower servicingcosts.

● Excellent dispersancy substantially reducessoot induced oil thickening and associatedengine wear.

● The high temperature stability of PSO DEO7000 is an outstanding feature. Advancedfunctional additives effectively controlCarbon and lacquer deposits formtions onvital moving parts, caused by very highengine temperatures.


SAE 15W-40 & 20W-50API CG-4/SGMB 228.3Volvo VDS-3Cummins 20072/77


DESCRIPTIONPSO DEO 7000 Oils are high performance, dedicated heavy duty engine lubricants designedfor use in modern high speed turbocharged diesel engines. They are based on a blend of highquality HVI solvent refined mineral oils and an advanced additive package.

PSO DEO 7000 Oils have been formulated for severe duty service in engines specificallydesigned to meet 1994 on-highway exhaust emission standards as defined in accordance withservice category API CG-4.








TYPICAL DATA

OILS

13

APPLICATIONSMulti-grade viscosity range of PSO DEO 6000ensures rapid circulation and easy crankingon start-up from cold, plus improved protectionat high operating temperatures. Other featuresinclude oil consumption control and reducedengine wear. These features ensure maximumprotection even for engines operating in hotdusty climates.

This wide range of application make it the firstchoice for mixed fleet operators where it isused in cars, trucks, 4WD, buses plus manyoff highway vehicles and plant engines.

BENEFITS● Longer engine life and increased engine

power retention.● Longer component and turbocharger life.

Reduced operating cost.● Improved anti-wear properties.

● Improved control of volatility and oilconsumption.

● Improved temperature and oxidationcontrol.


SAE 15W-40 & 20W-50API CF-4/SGUS MIL 2104EMB 228.1


DESCRIPTIONPSO DEO 6000 is a high performance multi-grade engine oil specially designed for use inheavy-duty diesel engines operating on high sulphur fuels.

It is suitable for use in gasoline and diesel four stroke engines including turbo charged unitsand may also be used in some manual transmissions.






Total base Number,mg KOH/gASTM D2896 9.5 9.5

Sulphated Ash, wt %ASTM D874 1 1


TYPICAL DATA

OILS

14

APPLICATIONSPSO DEO 5000 is developed for high speedfour stroke turbocharged or naturally aspirateddiesel engines. It is equally beneficial for off-highway vehicles and highway vehicles,tractors, diesel generators and small dieselengines in marine service (fishing andtransport).

BENEFITS● Excellent additive system of PSO DEO

5000 controls high temperature pistondeposi ts to maintain power andperformance.

● High TBN value of PSO DEO 5000neutralizes acid formation and protects theengine parts from corrosion wear to prolongengine over-haul period.

● Good oxidation stability increases draininterval and provides optimum service life.


SAE 40 & 20W-50API CF/SFUS MIL 2104DUS MIL 45152ACCMC D2JAPANESE CD

PSO DEO 5000Extra Protection for Diesel Engines

DESCRIPTIONPSO DEO 5000 is high performance heavy duty diesel engine oil specially designed to lubricatediesel as well as gasoline engines. Excellent detergent quality and good oxidation stabilityensure optimum service life with reduced maintenance cost.

PSO DEO 5000 provides strong protection to engine parts against corrosion and acid formation.The anti-oxidative characteristics resist oil degradation / control oil thickening and keep oilfilter clean.

PSO DEO 5000 SAE 40 SAE 20W-50

Kinematic Viscosity @100°C, cStASTM D445 14.2 19.5




Total base Number, mg KOH/gASTM D2896 10 10



TYPICAL DATA

OILS

15

APPLICATIONSMulti-grade viscosity range of PSO DEO 4000ensures rapid circulation and easy crankingon start-up from cold, and its special formulationensures improved protection at high operatingtemperatures. These features make it anexcellent choice, specially for engines operatingin hot dusty climates.

BENEFITS● Improved piston and ring groove deposits

control, oil consumption control and wearreduction.

● Longer engine and turbo charger life● Reduced inventory cost.● Reduced operating cost.

● Increased engine power retention and fuelefficiency.


SAE 15W-40 & 20W-50API CE/SGUS MIL 2104E

PSO DEO 4000Power Pack Performance

DESCRIPTIONPSO DEO 4000 is a premium quality “Super High Performance Diesel” (SHPD) multi-gradeengine oil specially designed for use in heavy duty diesel engines including turbocharged andnaturally aspirated units.






Total base Number, mg KOH/gASTM D2896 9.2 9.2



TYPICAL DATA

OILS

16

APPLICATIONSPSO DEO 3000 is designed to meet lubricationrequirements of heavy long distance turbo-charged diesel trucks. This grade is alsosatisfactory for use in automotive vehiclesranging from petrol and diesel engine lightvans.

BENEFITS● Protects against soot, varnish, sludge

formation, acid and corrosion.● Improved oil pressure and oil consumption

control.● Longer engine life and valve train

components life.● Improved high temperature protection,

specially for hot dusty climates.


SAE 20W-50, 15W-40API CD/SEUS MIL 2104E

PSO DEO 3000 Multi-GradeHeavy Duty Diesel Engine Oil

DESCRIPTIONPSO DEO 3000 is a multi-grade engine oil blended from high quality mineral oils and incorporatesan advance additives package. It is excellent in detergency, deposit control and acid neutralizingpower, anti-wear and anti-corrosion protection and foam control.







Total base Number, mg KOH/gASTM D2896 10 10

Sulphated Ash, wt %ASTM D874 1.1 1.1

TYPICAL DATA

OILS

17

APPLICATIONSThis range of heavy duty lubricants has beenprimarily developed to meet the requirementsof high speed supercharged diesel enginesoperating under the most severe serviceconditions.

In addition, the versatility, low ash content andhigh performance levels of these lubricantsprovide civil engineering plant operators withthe opportunity of standardizing on one oil fora wide variety of both petrol and diesel poweredequipments for which Series III or MIL-L-2104Coil is specified.

BENEFITS● Suitable for turbocharged and super-

charged diesel engines.

● Effectively controls wear and deposits.● Protects against rust and corrosion.● Prevents bearing corrosion and high

temperature deposits in diesel engines.


SAE 10,20,30,40,50API CD/SEUS MIL 2104E

PSO DEO 3000 Mono-GradeHeavy Duty Diesel Engine Oil

DESCRIPTIONThese oils are superior high detergency lubricants manufactured from high quality base oilsand incorporate a sophisticated additives package, designed to meet the stringent requirementsof high speed supercharged diesel and also petrol engines. These oils meet API classificationCD & Caterpillar Series III.

SAE SAE SAE SAE SAEPSO DEO 3000 10 20 30 40 50

Kinematic Viscosity @100°C, cStASTM D445 6.0 8.9 11.4 14.2 19.0


Flash Point (COC), °CASTM D92 204 210 220 230 240


Total base Number, mg KOH/gASTM D2896 10 10 10 10 10

Sulphated Ash, wt %ASTM D874 1.1 1.1 1.1 1.1 1.1


TYPICAL DATA

OILS

18

APPLICATIONSThese ranges of engine oils are available infive mono-grade versions. These have beenspecially designed for diesel engines operatingunder severe conditions.

Particular features of DEO 2000 grades aretheir resistance to sludging under short journeyoperation and their ability to provide excellentprotection under long haul conditions. However,these grades are not recommended for engineswhere the manufacturers specify a lubricantof MIL-L-2104C or Series III performancestandards or equivalent.

BENEFITS● Provides efficient lubrication over wide

range of operating temperatures.● Excellent control of oxidation, corrosion

and wear.● Controls oil consumption.


SAE 10,20,30,40,50API CC/SDUS MIL 2104B

PSO DEO 2000Diesel Engine Oil

DESCRIPTIONPSO DEO 2000 series of oils are high performance engine lubricants formulated from baseoils which incorporate a balanced additives package to meet the demands of diesel and gasolineengine vehicles used under moderate to severe service conditions.

PSO DEO 2000 SAE 10 SAE 20 SAE 30 SAE 40 SAE 50

Kinematic Viscosity@100°C, cSt 6.1 9.15 10.9 14.8 19.5ASTM D445




Total base Number, mg KOH/gASTM D2896 5.0 5.0 5.0 5.0 5.0


TYPICAL DATA

OILS

19

APPLICATIONSThe PSO DEO 1000 ranges of oils are availablein five versions, and have been speciallydesigned for mixed fleet operation underarduous conditions

These oils meet API service SC/CC as well asMIL-L-2104B and are not recommended forsuper -charged eng ines where themanufacturers specify a lubricant of API serviceCD or MIL-L-2104C performance standards.

BENEFITS● Provide efficient lubrication over a wide

range of operating temperatures.● Excellent control of oxidation, corrosion



SAE 10,20,30,40,50API CC/SCUS MIL 2104B

PSO DEO 1000Diesel Engine Oil

DESCRIPTIONPSO DEO 1000 series is formulated from good quality base oils which incorporate a balancedadditives package to meet the demands of both diesel and petrol engine vehicles used undermoderate to severe service conditions.

PSO DEO 1000 SAE 10 SAE 20 SAE 30 SAE 40 SAE 50

Kinematic Viscosity@100°C, cSt 4.5 8.7 10.8 14.8 20ASTM D445




Total base Number, mg KOH/gASTM D2896 4 4 4 4 4

Suphated Ash, wt %ASTM D874 0.3 0.3 0.3 0.3 0.3


TYPICAL DATA

OILS

20

APPLICATIONSECO Engine CC Oil is suitable for both,automotive and stationary diesel or gasolineengines.

ECO Engine CC Oil is suitable for vans, smalltrucks, cars and light commercial vehicles.

These oils meet API service SC/CC as well asMIL-L-2104B requirements and arerecommended for naturally aspirated engines.

BENEFITS● Provide efficient lubrication over a wide

range of operating temperature.● Excellent control of oxidation, corrosion



SAE 40, 50API CC/SCUS MIL 2104B

ECO ENGINE CC OILGood Performance Engine Oil

DESCRIPTIONECO Engine CC Oil is a good performance oil designed to meet the requirements of naturallyaspirated gasoline and diesel engines working under moderate service conditions requiringAPI CC or SC performance level.

The values mentioned are typical, depend upon the quality of the base oil available and cannot be used to reject theproduct. However these properties can be altered to meet the specific requirement of the process/equipment

ECO ENGINE CC OIL SAE 40 SAE 50

Kinematic Viscosity @100°C, cSt 14.56 19.79ASTM D44

Viscosity Index 82 84ASTM D2270

Flash Point (COC), °C 232 240ASTM D92

Pour Point, °C -6 -6ASTM D97

Total Base Number, mgKOH/g 4.5 4.61ASTM D2896

Sulphated Ash, wt% 0.4 0.4ASTM D874

TYPICAL DATA

OILS

21

APPLICATIONSECO Engine CD Oil is suitable for applicationsrequiring performance level of API classificationCD & Caterpillar Series III oils.

Suitable for use in heavy and light commercialvehicle operated with diesel or gasoline fuel.

ECO Engine CD Oil is a choice forstandardizing one oil for a wide variety of bothpetrol and diesel engines naturally aspirated,turbocharged or supercharged diesel enginesoperating under the most severe serviceconditions.

BENEFITS● Suitable for turbocharged and super-

charged diesel engines.

● Effectively control wear and deposits.● Protects against rust and corrosion.● Prevent bearing corrosion and high

temperature deposits in diesel engines.


SAE 40, 50,API CD/SEUS MIL 2104CUS MIL 46152ACaterpillar Series IIICCMC D1Japanese CC

ECO ENGINE CD OILHeavy Duty Engine Oil

DESCRIPTIONECO Engine CD Oil is a high performance and high detergency lubricant specially blended tomeet the stringent requirements of high speed supercharged diesel and petrol engines. Thislubricant meet API classification CD & Caterpillar Series III.

The values mentioned are typical, depend upon the quality of the base oil available and cannot be used to reject theproduct. However these properties can be altered to meet the specific requirement of the process/equipment

ECO ENGINE CD OIL 40 50

Kinematic Viscosity @100°C, cSt 14.7 19.7ASTM D445

Viscosity Index 85 85ASTM D2270

Flash Point (COC), °C 240 242ASTM D92

Pour Point, °C -6 -6ASTM D97

Total Base Number, mgKOH/g 9.5 9.6ASTM D2896

Sulphated Ash, wt% 0.82 0.82ASTM D874

TYPICAL DATA

OILS

22

APPLICATIONSPSO Two-Stroke oil has been speciallydeveloped for the lubrication of Two-Strokeautomotive gasoline engines. It has a betterthermal stability with reduced piston ringsticking, improved detergency and lubricity.

BENEFITS● Protection against piston cylinder scuffing.● Proteciton against ring shaking and exhaust

blocking.● Good rust protection.● Environment friendly to reduce smoke and

noise pollution.


SAE 20JASO FB

PSO TWO-STROKE OILLow Noise, Less Smoke Oil

DESCRIPTIONPSO Two-Stroke oil is a low smoke premium grade gasoline engine oil, which reduces smokeand dramatically extends engine life.


SAEPSO Two-Stroke Oil 20

Kinematic Viscosity@C100°C, cSt ASTM D445 7.14



TYPICAL DATA

OILS

23

APPLICATIONSPSO Blaze 7 is designed specifically for alltypes of 4-stroke motorcycle engines.

BENEFITS● Enhanced engine performance.● Improved engine and piston rings

cleanliness.● Compatible with leaded and unleaded fuels.● Increased engine life and engine power

retention.


SAE 40API SFJASO SE

PSO BLAZE 7

DESCRIPTIONPSO Blaze 7 is designed for 4-stroke motorcycle engine lubrication to retain engine power andenhance performance.

PSO Blaze 7 SAE 40








TYPICAL DATA

OILS

24

APPLICATIONSPSO T-2 Oil is mixed with gasoline during thefueling of two-stroke air-cooled or water-cooledengines.

BENEFITS● Ensures complete burning of the fuel and

reduces the noise.● Provides rust protection to the engine parts

PSO T-2 OIL

DESCRIPTIONPSO T-2 Oil is a premium quality straight mineral oil derived from high paraffinic crude.


PSO T-2 Oil SAE 30





TYPICAL DATA

OILS

25

APPLICATIONSPSO Gear Oil (GL-5) is an extreme pressuregear oil for use in axles and some gear boxes,particularly axles working under severeconditions, high loads and high operatingtemperatures.

BENEFITS● Excellent load carrying capabilities.● Increased protection.● Increased axle life.● Protects against rust and corrosion.


SAE 90, 140, 85W-14080W-90

API GL-5US MIL 2105D

PSO GEAR OIL EP(GL - 5)

DESCRIPTIONPSO Gear Oil (GL-5) is formulated from high quality mineral base oils and extreme pressure,anti-corrosion, anti-oxidant additives for use in hypoid and spiral bevel units operating undervery severe operating conditions. PSO Gear Oil EP (GL-5) range include two mono and onemulti-grade version to satisfy the requirements of various equipments.

PSO Gear Oil EP (GL-5) SAE SAE SAE SAE90 140 85W-140 80W-90

Kinematic Viscosity @100°C, cStASTM D445 17.4 29.2 25.5 14.0

Viscosity IndexASTM D2270 96 97 96 95

Flash Point (COC), °C ASTM D92 210 230 240 215

Pour Point, °CASTM D97 -3 -3 -18 -26


TYPICAL DATA

OILS

26

APPLICATIONSPSO Gear Oil EP is a multi-purpose gear oil,which is primarily recommended for use incommercial vehicles with spiral bevel finaldrives. It may also be used for spur and helicalgears requiring API GL-4 Performance.

BENEFITS● Excellent transmission life.● Excellent noise suppression.● Smooth gearshift.● Anti-wear protection.


SAE 80, 90, 140, 85W-140API GL-4US MIL 2105

PSO GEAR OIL EP

DESCRIPTIONPSO Gear Oil EP range is a mineral oil based lubricant, which incorporates a special extremepressure additive to protect the gear teeth under high temperatures and loads that can beexperienced in transmission units. PSO Gear Oil EP gear oils also contain anti-oxidant andanti-corrosion additives to give protection against oil oxidation and gear tooth corrosion andanti-foam to minimize the buildup of oil foam.

PSO Gear Oil EP SAE SAE SAE SAE80 90 140 85W-140

Kinematic Viscosity @100°C, cStASTM D445 12.0 16.4 29.2 25.5





TYPICAL DATA

OILS

27

APPLICATIONSPSO ATF automatic transmission fluid isrecommended whenever the manufacturerspecifies an oil meeting General Motor TypeA /Suffix A specifications.

BENEFITS● Excellent gearbox life.● Easy gear shifts.● Smooth shifts in automatic transmission.


SAE 20GM Type A / Suffix A

PSO ATF

DESCRIPTIONPSO ATF is a mineral based automatic transmission fluid suitable for certain transmissions,convertors and power steering systems. Meets the requirements of the General Motorsspecifications Type A / Suffix A.

PSO ATF SAE 20

Color Red






TYPICAL DATA

OILS

28

APPLICATIONSPSO Hydraulic Brake Fluid is speciallyformulated for use in automotive disc brakesystems. In addition, the fluid is suitable foruse in all hydraulic brake systems with theexception of those where a mineral oil basedfluid is required. PSO Hydraulic Brake FluidHD offers a very high level of performance andcan safely be used in the most demandingapplications.

BENEFITS● Excellent lubricity properties.● Mixable with other SAE J 1703 fluids.● Smooth and safe braking.


SAE J 1703FMVSS 116

DOT- 3

PSO HYDRAULICBRAKE FLUID HD

DESCRIPTIONPSO Hydraulic Brake Fluid HD has exceptional Anti Vapour Lock properties, effectively minimisingthe risk of brake failure due to vaporization of the fluid at very high temperatures experiencedin modern disc brake systems. PSO Brake Fluid HD is compatible with the various metals usedin braking systems, and offers excellent protection from corrosion and wear.Furthermore, PSO Hydraulic Brake Fluid HD has the seal-swell and lubricating propertiesrequired for long trouble free system life.

PSO Hydraulic Brake Fluid HD PH 7.0-11.5


Equilibrium Reflux BoilingPoint (ERBP), °C 205

ERBP WET, °C 140


TYPICAL DATA

OILS

29

OILS

30

APPLICATIONSPSO MP Grease is the recommended productfor automotive applications where a singleproduct can satisfy the multiple servicerequirements. It is suitable for wheel bearinglinkages, suspensions and general chassislubrication over a wide range of temperatures.

BENEFITS● Good oxidation stability which ensures

s a t i s f a c t o r y p e r f o r m a n c e o v e rrecommended service interval.

● Possesses good shear stability combinedwith high dropping points, it resist leakagefrom bearing.

● Resist water washing effect of road splashso that it stays where applied to providecontinuous lubrication.


NLGI 2

PSO MP GREASE

DESCRIPTIONPSO MP Grease is a lithium base general purpose automotive grease made from high qualitybase oils fortified with oxidation and rust inhibitors.

PSO MP Grease NLGI 2

Penetration worked@25°C 265-295

Dropping Point 180

Working Temperature Range °C -30 to 110

BASE Lithium


TYPICAL DATA

OILS

APPLICATIONSPSO COMPRESSOR OIL meets the requirementof major compressor manufacturer.

Single and multi-stage reciprocating compressorup to the discharge temperature 160 ºC.

Compressor where OEM specifies ashlessantiwear R&O type oil.

BENEFITS● Excellent oxidation stability with extended

drain interval.● Low carbon deposit tendency at the critical

area like discharge valve.● High oxidation stability resist to oil degradation

at high discharge temperature.


DIN 51506 VD-LDIN 51524 part 2 (2006)ISO 6743 part 4 - HM category

Muller Weingarten (excluding flywheel bearing)

PSOCOMPRESSOR OIL

DESCRIPTIONPSO COMPRESSOR OIL series is high performance Ashless Compressor Lubricant carefullydesgined with highly refined premium quality base oils to provide extended drain interval. Thelubricant is fortified with antiwear agent, Corrosion and Oxidation Inhibitor along with necessaryrequired additives component technology to provide excellent performance during application. PSOCOMPRESSOR OIL exceeds the requirement of DIN 51506 VD-L standards as well as DIN 51524Part2 (2006), ISO 6743 part 4 - HM category and Muller Weingarten (excluding flywheel bearing).


TYPICAL DATAISO VG ISO VG ISO VG

PSO COMPRESSOR OIL 68 100 150

Kinematic Viscosity@40°C, cSt 68.86 98.88 151.19 100°C 8.95 11.29 15.69ASTM D445

Viscosity IndexASTM D2270 104 100 106

Flash Point (COC), °CASTM D92 230 230 230

Pour Point, °CASTM D97 -15 -15 -15

OILS

31

APPLICATIONSPSO Super Gas Engine Oil Plus is designed forspark-ignited gas engines fuelled by natural gas,dual-fuel gas engines ignited by diesel pilot fueland gas engines fuelled from gas containingsulphur.

Meets the requirement of:• Caterpillar• Waukesha• Jenbacher

BENEFITS● Provides excellent resistance to oxidation

and nitration by minimizing acid formationand providing bearing protection againstcorrosion, giving reduction in over allmaintenance cost.

● A balanced sulphated ash level is optimized toprovide resistance against valve surface

deposits and reduces valve face/seat wearbecause excessive additive treatment will resultin formation of deposits causing ignition andvalve problems. Avoid sparkplug fouling andenhances the life of valves and spark plugs.

● Higher TBN value is there to neutralizecorrosive acids produced during dry and hotcombustion, providing protection againstcorrosion specially when biogas is in use.Thus, gives an extended oil drain internal.

● An advanced component technology consistingof selected detergent/dispersant additives givesexceptional piston and engine cleanliness formaximizing engine life.


API CF

PSO SUPER GAS ENGINE OILPLUS LA & MA

DESCRIPTIONPSO Gas Engine Oil Plus is a super-premium gas engine oil. It meets API CF for diesel fuel or dual-fuel applications and is blended with hydrocracked super refined group III base stocks to providehighest level of oxidation stability and long service life. It has been formulated to deliver superpremium performance in natural gas engines operating on a wide range of fuels (pipeline, field orlandfillgas).

It has been developed primarily to cope with the emerging requirements of major OEM of gasengines like Caterpillar, Waukesha and Jenbacher to use a Low Ash lubricant with extended draininterval.


PSO Super Gas LA MAEngine Oil Plus 30 40 40

Kinematic Viscosity@100°C, cSt ASTM D-445 10.8 14.9 14.5

Viscosity IndexASTM D-2270 150 150 146



Total Base Number,mgKOH/g ASTM D2896 5 5 8.2

Sulphated Ash, Wt %ASTM D874 0.45 0.45 0.74

TYPICAL DATA

OILS

32

APPLICATIONSPSO Texol grades are blended from good qualitysolvent refined, high viscosity index base oilsand are recommended for the lubrication ofcompressors, certain type of gear units and totallyenclosed steam engines, where conditions arenot so exacting as that of steam turbines. Theseoils can also be used as fine quality bearing oilswith advantage since they have a naturalresistance to oxidation and corrosion.

BENEFITS● Good thermal stability.● possess good water demulsificaton ability.


ISO VG 22,32,46,68,100,150220,320,460 and 680.

PSO TEXOL

DESCRIPTIONThese oils are available in 10 viscosity versions for a wide range of selection. PSO Texol oils areblended with good quality straight mineral oils and contain no additives. All grades possess gooddemulsificaton characteristics and are designed for application where heavily additive treated oilis not a requirement and also where moderate loads and temperatures are encountered.

PSO Texol22 32 46 68 100 150 220 320 460 680

Kinematic Viscosity@40°C, cSt 22 32 46 68 100 150 220 320 460 680ASTM D-445

Viscosity IndexASTM D-2270 100 100 100 100 98 98 96 96 96 82

Flash Point (COC), °CASTM D92 180 195 205 215 230 240 250 255 260 280

Pour Point, °CASTM D97 -6 -6 -6 -6 -3 -3 -3 -3 -3 -3


TYPICAL DATA

OILS

33

APPLICATIONSPSO Spincot oils are additive type low viscositylubricants for high-speed spindles, particularlythose used in the textile and machine toolindustries. These oils are also usedadvantageously as hydraulic media for varioushydraulic systems, where low viscosity andhigh viscosity index oils are recommended.These oils are suitable for use as instrumentoil as well.

BENEFITS● Good oxidation stability.● Good thermal stability.● Protection against rusting of metal parts.


ISO VG 10, 15

PSO SPINCOT

DESCRIPTIONSpincot range is blended with selective base oils possessing high viscosity index and incorporatesa suitable additives package which provides outstanding oxidation stability, high resistance togumming, sludging and discoloration. The film of these oils has high shear stability, whichensures minimum wear even with shock loads. These oils contain an effective rust inhibitorand provide protection to metal parts against rusting. They are also inhibited with anti-foamadditive to resist foaming tendency in service.

PSO Spincot ISOVG ISOVG10 15

Kinematic Viscosity@ 40°C, cSt 10 15ASTM D445





TYPICAL DATA

OILS

34

APPLICATIONSPSO Hygrol oils are an extensive range ofpremium quality hydraulic lubricants. Theirapplication covers both mobile and stationaryindustrial system / equipment. By virtue of theirbeing a good quality hydraulic fluid, they canalso be used as an excellent general-purposemachine lubricant.

BENEFITS● Good oxidation stability.● Excellent protection against rusting of

ferrous parts.Suitable for use over a widetemperature range.

● Excellent general purpose bearing andcirculating oils.

● Resist against tendency to foam, thusminimize the risk of spongy and erraticpump operation.


ISO VG 22,32,46,68,100,150,220,320,460 and 680.

PSO HYGROL

DESCRIPTIONPSO Hygrol oils are blended from high quality mineral oils and a package of anti-oxidant, anticorrosion and anti foam additives. These oils meet the most stringent requirements of hydrauliclubricants. PSO Hygrol are readily available in ten viscosity versions to suit the ambient operatingtemperature requirements as well as the type and design of hydraulic pump and the operatingpressure requirements of the system involved.

TYPICAL DATA

PSO HYGROL 22 32 46 68 100 150 220 320 460 680

Kinematic Viscosity@40°C, cSt 22 32 46 68 100 150 220 320 460 680ASTM D-445

Viscosity IndexASTM D-2270 95 95 95 95 95 95 95 95 95 95

Flash Point (COC), °CASTM D92 180 195 205 215 230 240 250 255 270 280

Pour Point, °CASTM D97 -6 -6 -6 -6 -3 -3 -3 -3 -3 -3

These typical characterstics are of existing production. The future production will conform to PSO blending specificationshence any variation in these characteristics will not effect the product performance.

OILS

35

APPLICATIONSPSO Hygrol AW oils are premium qualityhydraulic oils containing highly effective anti-wear agent to prevent wear and scuffing ofheavily loaded hydraulic system components.They meet the full service requirements ofVickers Vane type hydraulic pumps at statedspeed and pressures. They can also beeffectively used as general-purpose lubricantwhere mineral oil of high performance isrequired.

BENEFITS● High Anti-wear performance reduced

component wear, particularly at high speedand temperature.

● Long oil life due to thermal stability andoxidation resistance.

● Good water tolerance and demulsificatoncharacteristics, allowing rapid separationof condensation or water contamination.

● Good rust and water corrosion protectionof metal surfaces.

● Low foaming and air entrenchmenttendencies.


ISO VG 10,15,22,32,46,68,100 and150

PSO HYGROL AW

DESCRIPTIONPSO Hygrol AW oils are blended from high quality mineral oils and are treated with additivesto inhibit corrosion, foaming, oxidation, wear and scuffing. These oils are available in a numberof viscosity grades to suit various ambient and operating temperature requirements as well asthe type and design of hydraulic pump and operating pressures in the system.

PSO HYGROL AW 10 15 22 32 46 68 100 150

Kinematic Viscosity@40°C, cSt 10 15 22 32 46 68 100 150ASTM D-445

Viscosity IndexASTM D-2270 98 98 100 99 100 98 98 98

Flash Point (COC), °CASTM D92 130 140 180 195 205 215 230 240

Pour Point, °CASTM D97 -6 -6 -6 -6 -6 -6 -3 -3


TYPICAL DATA

OILS

36

APPLICATIONSPSO Turbine Oil T-series oils are primarilyintended for the lubrication of steam turbines,base oils used are selected to give the requisitewater separation characteristics, resistance tofoaming and the good air entrenchmentproperties essential for this demandingapplication.

PSO Turbine Oil T-series oil is also suitablefor water turbines, the power turbines ofgenerating sets based on aero derived gasturbines and for many industrial gas turbines. PSO Turbine Oil T-series have been wellproven in all of these applications, togetherwith many other industrial applications wherea high quality lubricating oil is required.

Where the viscosity grade is appropriate, PSOTurbine Oil T-series can be used in circulatingsystems for pumps, motors, compressors, mistlubrication systems and hydraulics, includinghydraulic turbine control systems benefits

BENEFITS● Excellent thermal and oxidation stability.● Good water tolerance and demulsification

characteristics.● Protects against corrosion of ferrous and

non-ferrous parts.● Resists foaming and ability to release

entrenched air quickly.

PSO TURBINE OILT- SERIES

DESCRIPTIONPSO Turbine Oil T-series is blended from highly refined group II hydrofinished base oils withexcellent oxidation stability which is further enhanced with selective additive system and toprotect against corrosion of ferrous and non-ferrous metals. PSO Turbine Oil T-series exhibitexcellent stability and long since life in the lubrication systems of steam and gas turbines.


OILS

37

PSO Turbine Oil T-Series ISOVG 32 46 68 100

Kinematic Viscosity@ 40 °C, cSt 32 46 68 100(ASTM D445)




Neutralisation, N°,(ASTM D-974/IP 139) 0.10 0.10 0.10 0.10

Water Separation, mins(ASTM D-1401) 10 10 10 10

Foaming Properties, ml(ASTM D-892)

Sequence I, 24°C 200/0 200/0 200/0 150/0

Sequence II, 93.5°C 50/0 50/0 50/0 50/0

Sequence III, 24°C 200/0 200/0 200/0 150/0

Copper Corrosion, 3 Hrs @ 100°C, Class(ASTM D-130/IP-154) 1 1 1 1

TOST hrs to 2.0(ASTM D-943/IP-157) >2000 >2000 >2000 >2000

Rotating Bomb Oxi Tests, mins(ASTM D-2272) 350 350 350 350

PSO TURBINE OILT- SERIES

TYPICAL DATA


OILS

38

APPLICATIONSPSO Gearled EP oils are primarily intendedfor enclosed gear sets operating under severeservice conditions. They are recommendedfor gear boxes in heavy industries such assteel plants, sugar and cement mills etc

BENEFITS● Excellent load carrying capability.● Excellent gearbox service life.● Protect against corrosion.● Excellent thermal and oxidation stability.● Good anti-wear performance.


ISOVG 68,100,150,220,320,460,680

Meet the performance requirement of:● US Steel 224● AGMA 9005-D94● DIN 51517 Part 3● David Brown DB S1.53.101● Cincinnati Miacron P74.

DESCRIPTIONPSO Gearled EP gear oils are available in seven-viscosity range (VG 68 - VG 680). These arelead free extreme pressure gear oils designed for industrial gear lubrication. They have betterwater tolerance, exhibiting good demulsification characteristics and low foaming tendencies,also providing rust and corrosion protection of metal surfaces.

These oils are formulated from high quality mineral oils and additives containing sulphur-phosphorus compounds to impart anti-wear and extreme pressure properties. PSO GearledEP oils demonstrate improved thermal stability and oxidation resistance over conventional leadnaphthenate types.

PSO Gearled EP68 100 150 220 320 460 680

Kinematic Viscosity@40°C, cSt 68 100 150 220 320 460 680ASTM D-445

Viscosity IndexASTM D-2270 100 100 99 100 100 98 82

Flash Point (COC), °CASTM D92 215 220 220 225 230 240 240

Pour Point, °CASTM D97 -6 -3 -3 -3 -3 -3 -3


TYPICAL DATA

PSO GEARLED EP

OILS

39

OILS

40

APPLICATIONSPSO Low Pour oil is a range of lubricantsdesigned to meet requirements of lowtemperature operations of various type ofrefrigerators and air conditioning compressorsusing halogenated refrigerant such as Freonetc. These are low cost locally blendedproducts, which do not acclaim meetinginternational specifications laid down for oilsused in refrigerator and air-conditioningcompressors. However their marketacceptability is good as a local suitable product.

BENEFITS● Good oxidation stability.● Good rust protection.● Low Pour points.● Resists formation of deposits in high

temperature parts of refrigeration system.● Suitable for use in bearing and gear sets

operating at low temperature.


ISOVG 22, 32, 46, 68, 100and 150

PSO LOW POUR OIL

DESCRIPTIONThese oils have been blended from highly refined paraffinic mineral base oils with low pourpoints and good oxidation resistance for providing excellent lubrication for many industrial andprocessing applications. They also incorporate selective pour points depressant to lower thepour point beyond the neutral capability of oils.

PSO Low Pour Oils 22 32 46 68 100 150

Kinematic Viscosity@40°C, cSt 22 32 46 68 100 150ASTM D-445

Viscosity IndexASTM D-2270 100 99 100 98 97 98

Flash Point (COC), °CASTM D92 180 195 205 215 230 240

Pour Point, °CASTM D97 -27 -27 -27 -27 -24 -24


TYPICAL DATA

OILS

41

APPLICATIONSThese are highly viscous lubricating oilsdeveloped for saturated steam cylinderlubrication, enclosed gears and other machineparts, where a thick grade of lubricant isrequired.

BENEFITS● Excellent choice in application requiring

high viscosity straight mineral oils.● Good lubricating properties.● Good demulsification characteristics.


ISOVG 460, 680

PSO CYLINDER OIL M

DESCRIPTIONThese oils are blended from high quality neutral solvent and bright stock of low acid value.These grades have reasonable water tolerance and can deal with steam condensates withoutimpairing their lubricating efficiency. PSO cylinder oils are straight mineral oil blend and arenot compounded with vegetable or animal oil.

PSO Cylinder Oil M 500 700

Kinematic Viscosity@40°C, cSt 460 680ASTM D-445

Viscosity IndexASTM D-2270 95 80




TYPICAL DATA

OILS

42

APPLICATIONSThese lubricants are specially designed forlubrication of MILL HOUSE BEARINGS ofSugar Mills where total loss system oflubrication is employed, requiring viscouslubricants with high load carrying properties.

BENEFITS● Good film forming characteristics.● Excellent load carrying and EP properties.● Withstand under shock load conditions,

without rupturing of lubricating oil film.● Satisfactory for use with yellow/white metal

bearing due to low acidity of oil.● Forms, full hydrodynamic film of lubricant

with high shear stability.

PSO SUGAR MILL OIL

DESCRIPTIONThese oils are asphalted blends with suitable base stock fortified with extreme pressure additives.These oils provide excellent load carrying properties under boundary lubrication and are availablein three viscosity ratings to meet the specific requirements.

PSO Sugar Mill Oil 3200 3800 4200

Kinematic Viscosity 100°C cSt 93 110 155ASTM D-445



Color Black Black Black


TYPICAL DATA

OILS

43

APPLICATIONSThese special grades are developed for MILLHOUSE PINION BEARINGS with addedproperty of adherence where total loss systemof lubricants is employed. These grades offerextra protection to Mill House bearing becauseof their strong film forming properties.

BENEFITS● Excellent load carrying properties.● Forms a strong oil film between the moving

parts.● Provides a strong power of adhesion and

wetting quality even under extremepressure and high load working condition.

● Satisfactory for use with yellow/white metalbearings.

PSO BEARING COMPOUND

DESCRIPTIONThese oils are similar to Sugar Mill Oils, both in choice of base oils and additive treatment. Butto improve their performance specially selected tackiness additives are incorporated in thisformulation, which adhere strongly with metal surfaces. These grades contain special tackinessagent and extreme pressure additives to provide maximum protection under boundary lubricationconditions.

PSO Bearing Compound T-96 C

Kinematic Viscosity 100°C cSt 120 105ASTM D-445

Viscosity IndexASTM D-2270 75 75



TYPICAL DATA

INDUSTRIAL

OILS

44

APPLICATIONSPSO Gear & Wire Rope Compound is a rangeof adhesive type low cost lubricants for exposedgear & wire rope telphers and conveyors oncol l iery and quarry etc. These arerecommended for comparatively rough gearingrunning at modest speed in locations wherethey are exposed to leather, sea spray etc.

BENEFITS● Forms a thick tenacious coating on metal

surfaces.● Available in seven viscosity versions to suit

specific application.● Protects metal surfaces from corrosion.● Suitable for large open gears.

PSO GEAR & WIREROPE COMPOUND

DESCRIPTIONThese are Asphaltic viscous lubricants having good adhesion to the metal surfaces. These non-corrosive lubricants form a thick tenacious protective coating on metal surfaces. These lubricantsare available in seven-viscosity ranges to suit specific applications. The asphaltic matters inthe lubricants provide extreme pressure characteristics. PSO Gear & Wire Rope CompoundR-96 is fortified with high quality extreme pressure sulphur-phosphorous additives.

PSO G&WR CompA C D F G H R-96

Kinematic Viscosity 100°C cSt 40 100 210 425 850 1140 120ASTM D-445

Flash Point (COC), °CASTM D92 230 236 238 240 250 260 235

Color Black Black Black Black Black Black Black


TYPICAL DATA

INDUSTRIAL

OILS

45

APPLICATIONSPSO Heat Transfer oils are chosen for hightemperature operation because of their goodthermal stability and are used both for heatsystems in works processing, space heatingand viscosity baths. In air excluded systems,these products are satisfactory upto atemperature of 300°C. Localized temperaturesmay be avoided to prevent thermal breakdownof the oil which can lead to carbon formation

BENEFITS● Bulk temperature could be increased upto

300 C under carefully controlled condition.● Good rust protection.● Good oxidation stability.


ISOVG 32, 100, 460

PSO HEAT TRANSFER OIL

DESCRIPTIONThese oils are blended carefully with selective base stocks having natural thermal stabilitypreventing breakdown in service. Base stock components are chosen in such a manner thatthese will provide resistance to evaporation at high temperature. These oils also have highviscosity index so that any appreciable change in viscosity does not affect heat transfer efficiencyof the oil.

PSO HEAT TRANSFEROIL 32 100 460

Kinematic Viscosity@40°C, cSt 32 100 460ASTM D-445





TYPICAL DATA

0

OILS

46

APPLICATIONSPSO Solcut oil is specially formulated for theparticular requirements of mild / moderatemachining operations which generateexcessive heat where an effective coolantrather than a lubricant is the essentialrequirement. It is suitable for use in machinesof all metals, ferrous and non-ferrous, exceptmagnesium. (Soluble oil promotes burning ofmagnesium metal). PSO Solcut Oil due to its’tendency to permit setting of dirt is alsorecommended for most grinding operations.

BENEFITS● Permit rapid separation of chips and

grinding dirt.● Permit reasonably good protection and

good cutting characteristics.● Forms stable emulsion in soft/hard water.

PSO SOLCUT OIL

DESCRIPTIONPSO Solcut is a general purpose oil which forms a stable milky emulsion when mixed withwater. This oil contains an effective emulsifier system and biocide.

PSO Solcut Oil Mild Alloy Free cuttingSteel Steel Brasses

Milling, Turning, Drilling 1:25 1:20 1:35

Reaming, Tapping &Screwing 1:25 1:25 1:35

Grinding 1:40 1:40 1:40


TYPICAL DATA

OILS

47

APPLICATIONSPSO Neat Metal Cutting Oil is recommendedfor machining both ferrous and non-ferrousmetals. Suitable for machining high alloy,stainless steel and mild metals. In addition, itmaintains reserve basicity that performs as aneffective rust/corrosion inhibitor.

PSO Neat Metal Cutting Oil is recommendedto machine tough ferrous alloys as well as mildsteel and cast iron in such operations as:

• Milling• Drilling• Turning• Grinding• Broaching• Thread Cutting• Tapping• Metal Forming

BENEFITS● Mild odor, light colour● Combinations with chlorinated paraffins or

alphaolefins, overbased sulfonates aresuitable for machining high alloy andstainless steel metals.

● Does not affect the transparency of cuttingfluids, provides high work piece visibility.Excellent extreme pressure/antiwearproperties.

● More environmentally acceptable● Provides good surface finishes

● Non-staining● Excellent rust inhibition● Low odor


ISOVG 22

PSO NEAT METALCUTTTING OIL

DESCRIPTIONPSO Neat Metal Cutting Oil is a light-color, high-sulphur-content polysulfide that providesoutstanding extreme pressure properties. This oil-soluble additive is recommended for use inoil-base soluble oil and semi-synthetic systems for metal removal and metal forming applicationson ferrous metals. PSO Neat Metal Cutting Oil is synergistic with other extreme pressurechemistries – including chlorinated paraffins and alphaolefins, overbased sulfonates andsynthetic esters and provides outstanding performance on difficult-to-machine metals. PSONeat Metal Cutting Oil is overbased with synthetic calcium sulfonate extreme pressure additivethat also provides corrosion protection.

PSO Neat Metal Cutting Oil

Kinematic Viscosity@40°C, cSt 22.16(ASTM D-445)

Viscosity Index 105ASTM D2270

Flash Point (COC), °C 178ASTM D92

Pour Point, °C -33ASTM D97

TBN mg KOH/g 19ASTM 2896


TYPICAL DATA

OILS

48

APPLICATIONSThis oil is employed for the heat treatment ofmetals as quenching media to acquire correcttempering of high Carbon Steel tools and otheraccessories

BENEFITS● Good oxidation stability● Good thermal stability.


ISOVG 32

PSO QUENCHING OILNO. 10

DESCRIPTIONThis is blended with selected base oils to assist in rapid heat dissipation. The base oils havethe property of low volatility, high flash point and improved degree of oxidation stability so thatthe rate of heat dissipation is not impaired mainly on account of loss of lighter fractions.

PSO Quenching Oil ISO VGNo. 10 32

Kinematic Viscosity@40°C, cSt 32ASTM D-445

Viscosity Index 96ASTM D2270

Flash Point (COC), °C 190ASTM D92

Pour Point, °C -6ASTM D97


TYPICAL DATA

OILS

49

APPLICATIONSPSO Slide Way Oil 32 is recommended formachine tools with combined hydraulic andslide way lubrication.

PSO Slide Way Oil 68 is the normalrecommendation for horizontal sideways.

PSO Slide Way Oil 220 is used on heavily orvertical slides.

BENEFITS● Smooth slide way movement● Smooth for all types of slide way material.● Good protection against corrosion and

staining.● Good load carrying capability under heavy

loads.


ISOVG 32, 68, 220

PSO SLIDE WAY OIL

DESCRIPTIONPSO Slide Way Oils are based upon highly refined mineral oils, which incorporate tackinessand lubricating additives to give smooth sideway movement under heavy loads.

PSO Slideway Oil 32 68 220

Kinematic Viscosity@ 40°C, cSt 32 68 220ASTM D-445

Viscosity IndexASTM D2270 95 95 95



Phosphorus, % wt 0.28 0.28 0.28


TYPICAL DATA

OILS

50

APPLICATIONSThis oil is a general-purpose non-additivetreated oil of reasonably good oxidation stabilityused for a variety of process applications andis also suitable for once through lubrication ofindustrial machinery.

BENEFITS● Excellent choice in application requiring

high viscosity straight mineral oils.● Good lubricating properties.● Good demulsification characteristics.


ISOVG 460

PSO PROCESS OIL R

DESCRIPTIONPSO Process Oil R is blended with high quality base stocks, possessing natural resistance tooxidation and thermal breakdowns. This is a premium grade straight mineral oil containing noadditives, by virtue of it’s high viscosity and other properties, it is suitable for use in manyindustrial applications where a thick lubricant once through application is required. This gradeis also suitable for systems where the oil stays relatively for shorter periods.

PSO Process Oil R ISOVG 460

Kinematic Viscosity40°C, cSt 460

ASTM D-445





TYPICAL DATA

OILS

51

APPLICATIONSA range of insulating cooling oil for electricaltransformer, switchgears and circuit breakers.

BENEFITS● Good oxidation stability.● Meets IEC-296, BS-148/72 specifications.

PSO TRANSFORMER OIL

DESCRIPTIONPSO Transformer Oil BS-148 class I is a pure mineral hydrocarbon oil, specially refined andblended from selected base oils having the properties of insulating coils of transformers, switchesand circuit breakers both, electrically and thermally. This oil is produced according to IECClass I specification suitably adjusted for tropical areas. The oil is refined in such a way thatit imparts exceptional high oxidation and high resistance to gas formation. The oil shows highdegree of dielectric properties and resistance to power losses. Well-stabilized methods areused to control the quality of the oils in order to meet international standard specification andmaximum trouble free service. It also meets the specification of BS-148/72.

PSO Transformer Oil Class I

ISOVG 15

Kinematic Viscosity@ 20°C, cSt 40

40°C, cSt 16.5(ASTM D-445)

Flash Point (PMCC), °C minASTM D93 140

Pour Point, °C maxASTM D97 -30

Breaking Voltage, KV, minIEC / BSS 148 30


TYPICAL DATA

OILS

52

APPLICATIONSPSO Alpha Greases 2&3 are multi-purposegreases suitable for lubrication of all types ofplain and roller bearings and have good waterresistance and give excellent protection againstcorrosion.

PSO Alpha EP range of Lithium base extremepressure greases are for use in applicationwhere bearings are subjected to shock loading.They are all waterproof and can cater to hightemperature.

BENEFITS● Good oxidation stability which ensure

s a t i s f a c t o r y p e r f o r m a n c e o v e rrecommended service interval.

● Protect bearing components against rustresist water washing effect.

● Good water tolerance.● PSO Alpha EP greases protect bearing

components subjected to heavy shockloadings.


NLGI 0, 1, 2, 3

PSO ALPHA /ALPHA EP GREASES

DESCRIPTIONA range of high quality lithium thickened mineral oil greases suitable for ball and roller bearinglubrication. They contain oxidation and corrosion inhibitors. PSO Alpha EP greases also containextreme pressure additives.

PSO Greases Alpha-2 Alpha-3 Alpha EP-0 Alpha EP-1 Alpha EP-2

NLGI-2 NLGI-3 NLGI-0 NLGI-1 NLGI-2

Penetration Worked @ 25°C 265-295 220-250 355-385 310-340 265-295

Dropping Point °C 180 180 175 180 180

Working TemperatureRange °C -35 to 104 -35 to 104 - - -

Base Lithium Lithium Lithium Lithium Lithium


TYPICAL DATA

OILS

53

APPLICATIONSPSO Moly Grease EP-2 is speciallyrecommended for heavily loaded slow ormedium speed bearing and sliding motionswhere the prevention of scuffing is necessary.

BENEFITS● Reduced wear.● Prevention of scuffing .● Resistance to water and rust.● Provide effective lubrication under boundary

condition.


NLGI 2

PSO MOLY GREASE EP

DESCRIPTIONA lithium based multi purpose grease containing Molybdenum disulphide. This grease alsohave EP protection to withstand shock loads.

PSO MOLY GREASE EP NLGI-2

Penetration worked @ 25 °C 265-295

Dropping Point 190

Working TemperatureRange °C -

Base Lithium


TYPICAL DATA

Documents

Pso Lubricants