PUB ISO 2014-09 - unms.sk ?· ISO 15512:2014 Plastics — Determination of water content D

  • Published on
    09-Aug-2018

  • View
    213

  • Download
    0

Embed Size (px)

Transcript

  • Standards published New International Standards published between 01 September and 30 September 2014

    * Available in English only

    ** French version of standard previously published in English only

    Price group

    IIW International Institute of Welding

    ISO/TR 18786:2014 * Health and safety in welding Guidelines for risk assessment of welding fabrication activities

    C

    TC 2 Fasteners

    ISO 10664:2014 Hexalobular internal driving feature for bolts and screws D

    ISO 1891-2:2014 * Fasteners Terminology Part 2: Vocabulary and definitions for coatings G

    TC 4 Rolling bearings

    ISO 492:2014 Rolling bearings Radial bearings Geometrical product specifications (GPS) and tolerance values

    G

    ISO 3290-1:2014 Rolling bearings Balls Part 1: Steel balls C

    ISO 3290-2:2014 Rolling bearings Balls Part 2: Ceramic balls C

    TC 8 Ships and marine technology

    ISO 18611-1:2014 * Ships and marine technology Marine NOx reduction agent AUS 40 Part 1: Quality requirements

    A

    ISO 18611-2:2014 * Ships and marine technology Marine NOx reduction agent AUS 40 Part 2: Test methods

    F

    ISO 18611-3:2014 * Ships and marine technology Marine NOx reduction agent AUS 40 Part 3: Handling, transportation and storage

    B

    IEC/PAS 80005-3:2014

    * Utility connections in port Part 3: Low Voltage Shore Connection (LVSC) Systems General requirements

    F

    TC 10 Technical product documentation

    ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams

    C

    TC 17 Steel

    ISO 630-5:2014 * Structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

    C

    ISO 630-6:2014 * Structural steels Part 6: Technical delivery conditions for seismic-proof improved structural steels for building

    C

    ISO 683-18:2014 * Heat-treatable steels, alloy steels and free-cutting steels Part 18: Bright steel products

    G

  • ISO 16143-1:2014 * Stainless steels for general purposes Part 1: Corrosion-resistant flat products F

    ISO 4995:2014 * Hot-rolled steel sheet of structural quality B

    TC 22 Road vehicles

    ISO 18541-1:2014 * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 1: General information and use case definition

    F

    ISO 18541-2:2014 * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements

    E

    ISO 18541-3:2014 * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements

    C

    ISO 15007-1:2002 Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 1: Definitions and parameters

    B

    TC 23 Tractors and machinery for agriculture and forestry

    ISO 11783-12:2014 Tractors and machinery for agriculture and forestry Serial control and communications data network Part 12: Diagnostics services

    E

    TC 28 Petroleum products and lubricants

    ISO/TR 19686-1:2014

    * Petroleum products Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products

    B

    TC 29 Small tools

    ISO 6103:2014 Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing

    D

    TC 34 Food products

    ISO 12228-2:2014 Determination of individual and total sterols contents Gas chromatographic method Part 2: Olive oils and olive pomace oils

    C

    ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils Determination by capillary gas chromatography

    C

    TC 35 Paints and varnishes

    ISO 2813:2014 Paints and varnishes Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

    D

    ISO 13803:2014 Paints and varnishes Determination of haze on paint films at 20 degrees B

    TC 39 Machine tools

    ISO 14955-1:2014 Machine tools Environmental evaluation of machine tools Part 1: Design methodology for energy-efficient machine tools

    F

    ISO 230-10:2011/Amd 1:2014

    Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools Amendment 1: Measuring performance with scanning probes

    XZ

    TC 42 Photography

    ISO 18938:2014 * Imaging materials Optical discs Care and handling for extended storage D

  • TC 44 Welding and allied processes

    ISO 25980:2014 Health and safety in welding and allied processes Transparent welding curtains, strips and screens for arc welding processes

    B

    TC 45 Rubber and rubber products

    ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners Specification B

    ISO 17324:2014 * Rubber hoses for automotive turbochargers Specification C

    ISO 27126:2014 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification

    D

    ISO 4097:2014 * Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure C

    ISO 4659:2014 * Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) Evaluation procedure

    B

    ISO 7663:2014 * Halogenated isobutene-isoprene rubber (BIIR and CIIR) Evaluation procedures

    B

    ISO 2440:1997/Amd 2:2014

    Flexible and rigid cellular polymeric materials Accelerated ageing tests Amendment 2

    XZ

    TC 61 Plastics

    ISO 17541:2014 * Plastics Quantitative evaluation of scratch-induced damage and scratch visibility

    C

    ISO 15512:2014 Plastics Determination of water content D

    ISO 22007-6:2014 Plastics Determination of thermal conductivity and thermal diffusivity Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

    B

    ISO 12000:2014 Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Definitions and review of test methods

    A

    ISO 19066-1:2014 Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications

    B

    TC 71 Concrete, reinforced concrete and pre-stressed concrete

    ISO 19338:2014 * Performance and assessment requirements for design standards on structural concrete

    B

    TC 79 Light metals and their alloys

    ISO 6361-2:2014 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties

    G

    ISO 6361-3:2014 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 3: Strips: Tolerances on shape and dimensions

    A

    ISO 6361-4:2014 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 4: Sheets and plates: Tolerances on shape and dimensions

    C

    ISO 6362-2:2014 * Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and D

  • profiles Part 2: Mechanical properties

    ISO 6362-7:2014 * Wrought aluminium and aluminium alloys Extruded rods/bars, tubes and profiles Part 7: Chemical composition

    A

    TC 85 Nuclear energy, nuclear technologies, and radiological protection

    ISO 16641:2014 Measurement of radioactivity in the environment Air Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors

    C

    TC 106 Dentistry

    ISO 16635-2:2014 Dentistry Dental rubber dam instruments Part 2: Clamp forceps A

    TC 121 Anaesthetic and respiratory equipment

    ISO 5359:2014 Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases

    D

    TC 127 Earth-moving machinery

    ISO 17253:2014 * Earth-moving machinery and rough-terrain variable-reach trucks Design requirements for machines intended to be driven on road

    C

    TC 131 Fluid power systems

    ISO 16908:2014 Hydraulic filter element test methods Thermal conditioning and cold start-up simulation

    C

    TC 147 Water quality

    ISO 16308:2014 Water quality Determination of glyphosate and AMPA Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection

    D

    ISO 9308-1:2014 Water quality Enumeration of Escherichia coli and coliform bacteria Part 1: Membrane filtration method for waters with low bacterial background flora

    B

    TC 150 Implants for surgery

    ISO 12891-2:2014 * Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants

    E

    ISO 5832-4:2014 Implants for surgery Metallic materials Part 4: Cobalt-chromium-molybdenum casting alloy

    A

    ISO 5832-11:2014 Implants for surgery Metallic materials Part 11: Wrought titanium 6-aluminium 7-niobium alloy

    A

    TC 160 Glass in building

    ISO 11485-3:2014 Glass in building Curved glass Part 3: Requirements for curved tempered and curved laminated safety glass

    B

    TC 164 Mechanical testing of metals

    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method C

  • ISO 6506-2:2014 Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines

    C

    ISO 6506-3:2014 Metallic materials Brinell hardness test Part 3: Calibration of reference blocks

    B

    ISO 6506-4:2014 Metallic materials Brinell hardness test Part 4: Table of hardness values B

    TC 171 Document management applications

    ISO/TR 17797:2014 * Electronic archiving Selection of digital storage media for long term preservation

    D

    ISO/TR 18160:2014 * Document management Digital preservation Analog recording to silver-gelatin microform

    B

    TC 172 Optics and photonics

    ISO 14135-1:2014 * Optics and photonics Specifications for telescopic sights Part 1: General-purpose instruments

    A

    ISO 14135-2:2014 * Optics and photonics Specifications for telescopic sights Part 2: High-performance instruments

    A

    ISO 9345-2:2014 * Microscopes Imaging distances related to mechanical reference planes Part 2: Infinity-corrected optical systems

    B

    ISO 8598-1:2014 Optics and optical instruments Focimeters Part 1: General purpose instruments

    E

    ISO 11978:2014 Ophthalmic optics Contact lenses and contact lens care products Labelling B

    ISO 11979-6:2014 Ophthalmic implants Intraocular lenses Part 6: Shelf-life and transport stability testing

    B

    ISO 14730:2014 Ophthalmic optics Contact lens care products Antimicrobial preservative efficacy testing and guidance on determining discard date

    D

    ISO 18259:2014 * Ophthalmic optics Contact lens care products Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms

    B

    ISO/TS 19979:2014 * Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses

    B

    IEC 80601-2-58:2014

    * Medical electrical equipment Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

    G

    TC 173 Assistive products for persons with disability

    ISO 7176-22:2014 Wheelchairs Part 22: Set-up procedures E

    TC 189 Ceramic tile

    ISO 10545-1:2014 Ceramic tiles Part 1: Sampling and basis for acceptance B

    TC 190 Soil quality

    ISO 14388-1:2014 Soil quality Acid-base accounting procedure for acid sulfate soils Part 1: Introduction and definitions, symbols and acronyms, sampling and sample

    C

  • preparation

    ISO 14388-2:2014 Soil quality Acid-base accounting procedure for acid sulfate soils Part 2: Chromium reducible sulfur (CRS) methodology

    C

    TC 193 Natural gas

    ISO/TR 22302:2014 Natural gas Calculation of methane number B

    ISO 16960:2014 Natural gas Determination of sulfur compounds Determination of total sulfur by oxidative microcoulometry method

    B

    TC 194 Biological and clinical evaluation of medical devices

    ISO 10993-3:2014 Biological evaluation of medical devices Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity

    E

    TC 195 Building construction machinery and equipment

    ISO 18650-2:2014 Building construction machinery and equipment Concrete mixers Part 2: Procedure for examination of mixing efficiency

    D

    TC 201 Surface chemical analysis

    ISO 17560:2014 * Surface chemical analysis Secondary-ion mass spectrometry Method for depth profiling of boron in silicon

    B

    TC 204 Intelligent transport systems

    ISO/TS 21219-2:2014

    * Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 2: UML modelling rules

    F

    TC 207 Environmental management

    ISO/TS 14071:2014 Environmental management Life cycle assessment Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006

    B

    TC 212 Clinical laboratory testing and in vitro diagnostic test systems

    ISO 15189:2012 * Medical laboratories Requirements for quality and competence G

    TC 213 Dimensional and geometrical product specifications and verification

    ISO 16610-71:2014 Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters: Gaussian regression filters

    D

    TC 215 Health informatics

    ISO 17090-4:2014 * Health informatics Public key infrastructure Part 4: Digital Signatures for healthcare documents

    D

    ISO 22600-1:2014 Health informatics Privilege management and access control Part 1: Overview and policy management

    E

    ISO 22600-2:2014 Health informatics Privilege management and access control Part 2: Formal models

    D

  • ISO 22600-3:2014 Health informatics Privilege management and access control Part 3: Implementations

    G

    TC 217 Cosmetics

    ISO 17516:2014 Cosmetics Microbiology Microbiological limits A

    TC 244 Industrial furnaces and associated processing equipment

    ISO 13577-2:2014 * Industrial furnaces and associated processing equipment Safety Part 2: Combustion and fuel handling systems

    H

    JTC 1 Information technology

    ISO/IEC 8824-1:2008/Cor 2:2014

    * Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1: Technical Corrigendum 2

    free

    ISO/IEC 8824-4:2008/Cor 1:2014

    * Information technology Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications Part 4: Technical Corrigendum 1

    free

    ISO/IEC 8825-1:2008/Cor 2:2014

    * Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Part 1: Technical Corrigendum 2

    free

    ISO/IEC 8825-4:2008/Cor 2:2014

    * Information technology ASN.1 encoding rules: XML Encoding Rules (XER) Part 4: Technical Corrigendum 2

    free

    ISO/IEC 8825-5:2008/Cor 2:2014

    * Information technology ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 Part 5: Technical Corrigendum 2

    free

    ISO/IEC 17811-3:2014

    * Information Technology Device control and management Part 3: Specification of Reliable Message Delivery Protocol

    C

    ISO/IEC 1539-1:2010/Cor 3:2014

    * Information technology Programming languages Fortran Part 1: Base language Technical Corrigendum 3

    free

    ISO/IEC 18031:2011/Cor 1:2014

    * Information technology Security...

Recommended

View more >