QUICK-RELEASE COUPLINGS RPL - Proplast · QUICK-RELEASE COUPLINGS RPL ... QUICK-RELEASE COUPLINGS NEW GENERATION 2 EVEN EASIER CONNECTION AND DISCONNECTION The RPL range is quick

TEMPERATURE CONTROL

QUICK-RELEASE COUPLINGS RPL

n FULL FLOW

n Nominal diameter:1/4”, 5/16” and 1/2”

n Immediate visual identification of thecircuits

n Easy connection and disconnection

n Even faster installation due topre-applied PTFE on straight socketmale threads

n RPL 08 bridge for easy creation ofloops on your mold cooling circuits

A P P L I C AT I O N S

n Cold, chilled or hot water circuits.

n Mold temperature control connectionson thermoplastic, Zamak or aluminiuminjection molds.

NEW

G

ENERATIO

N

EASE OF MAINTENANCE

Seal changes on the plugs are quick and easy.

EFFICIENCY

Excellent immediate long term sealing due topre-applied PTFE on straight socket male thread.

EVEN MORE RELIABILITY

n thanks to the reinforced lockingmechanism.

NEW

G

ENERATIO

N

REG

ISTERED

MO D E

L

RPL FULL-FLOWQUICK-RELEASE COUPLINGS

N E W G E N E R AT I O N

2

EVEN EASIER CONNECTION AND DISCONNECTION

The RPL range is quick to operate, reliable anddesigned for one handed operation.The knurled locking sleeve ensures easy plughandling.When installed in a confined area, a shape (Ø 5/16”and 1/2”) or a groove (Ø 1/4”) on the locking sleeve,allows the disconnection via a tool, in completesafety.

MARKING ON BOTHSOCKET AND PLUG

3 DIFFERENT SIZES FOR ALL MOLDAPPLICATIONS

RPL quick-release couplings with internal diameters of 1/4”, 5/16” or1/2” gives maximum through flow with minimum outside dimensions.

PERFORMANCE

RPL couplings are full-flow, thereby avoiding any build-up of deposits.

IDENTIFICATION OF YOUR CIRCUITS

EVEN QUICKER AND PRECISE

n Your hot or cold circuits arequickly and easily identified byred or blue collars installedonto straight or extended socketsand onto plugs.

Possible marking of circuitnumber on socket collar.

EVEN MORE SAFETY

VISUAL VALIDATION OF THECONNECTED POSITION

n You control the locked position byvisualizing the red, blue or blackcollar on the plug.

EASY HANDLING OF THE MOLDS

FLUSH MOUNTED

for new moulds:- easier storage of the molds.- no risk of damage to the sockets.

SLIGHTLY RAISED

for existing molds.

T W O M E T H O D S F O R S O C K E T I N S TA L L AT I O N

P

A T .

P

E N D I NG

A COMPLETE RANGE

n 2 types of extended socketsIn nickel plated brass, smooth or threaded, the strong one piece socket extenders areeasily installed.

n RPL 08 BRIDGEThe RPL 08 rigid bridges ensure that water loops are neat and tidy.

SMOOTH VERSION

THREADED VERSION

3

4

T E C H N I C A L F E AT U R E S

V = 16 ft/s

10

5

3

2

1

0.5

0.3

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20

Cv=

1.87

C h a r t f l o w c a p a c i t y / p r e s s u r e d r o p f o r w a t e rTest conditions: flow direction: socket plug

Flow (gal/mn)

Pres

sure

drop

(psi

)

V = 16 ft/s

10

5

3

2

1

0.5

0.3

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20

Cv=

2.68

Flow (gal/mn)

Pres

sure

drop

(psi

)

RPL 06 RPL 08

* Pour d’autres conditions, nous consulter

Nominal bore (in) 5/16

Max. working pressure (psi) 145

Working temperatures (°F) +5 to +194 * with O-ring in Nitrile



Working temperatures (°F) +5 to +194 *with O-ring in Nitrile* for other conditions, call us * for other conditions, call us

5

V = 16 ft/s

10

5

3

2

1

0.5

0.3

0.2

0.10.1 0.2 0.3 0.5 1 2 3 5 10 20

Cv=

7.92

Flow (gal/mn)

Pres

sure

drop

(psi

)

RPL 12

* for other conditions, call us



Working temperatures (°F) +5 to +194 * with O-ring in Nitrile

C O N S T R U C T I O N

n Socket in nickel plated brass with PTFEpre-applied (only on straight socket, malethreads)

n Plug and extender socket in nickel plated brass

n O-ring in Nitrile (NBR), other seals on request

n Spring and balls in stainless steel 18/8

n RPL 06: 6 ballsRPL 08 and 12: 8 balls

PAT. PENDING

REGISTERED MODEL

6

PART-NUMBERS

I N S TA L L AT I O N D I M E N S I O N S O F S O C K E T S I N M O L D S

FEMALE ØA E J ØF G I ALLEN KEY recommendedTHREAD min. min. torque

(oz.ft)

G 1/8 0.67 0.79 0.39 0.73 0.81 1.16 1/4” 177

NPT 1/8 0.67 0.87 0.39 0.73 0.88 1.24 1/4” 177

G 1/4 0.67 0.71 0.51 0.73 0.73 1.20 1/4” 354

NPT 1/4 0.67 0.79 0.53 0.73 0.81 1.30 1/4” 354

G 1/8 0.83 0.90 0.39 0.88 0.94 1.30 1/4” 177

NPT 1/8 0.83 1 0.39 0.88 1 1.38 1/4” 177

G 1/4 0.83 0.87 0.47 0.88 0.90 1.34 5/16” 354

NPT 1/4 0.83 0.94 0.47 0.88 0.92 1.40 5/16” 354

G 3/8 0.83 0.47 0.51 0.88 0.51 0.98 5/16” 354

NPT 3/8 0.83 0.55 0.51 0.88 0.55 1.06 5/16” 354

G 3/8 1.26 1.14 0.51 1.32 1.18 1.65 3/8” 590

NPT 3/8 1.26 1.30 0.51 1.32 1.30 1.81 3/8” 590

G 1/2 1.26 1.18 0.59 1.32 1.22 1.77 9/16” 590

NPT 1/2 1.26 1.38 0.59 1.32 1.36 2 9/16” 590

G 3/4 1.26 0.59 0.71 1.32 0.79 1.42 9/16” 590

NPT 3/4 1.26 0.69 0.71 1.32 0.69 1.44 9/16” 590

J min.

E

ØA

I

G

ØFm

in.

SLIGHTLY RAISED SOCKET

Chamfer the mold angles 0.012 x 0.012

FLUSH MOUNTED SOCKET


RPL 06

RPL 08

RPL 12

* R 1/8 = G 1/8 co.

THREADING DIMENSIONS (in)

RPL 06

RPL 08

RPL 12

1 . S T R A I G H T S O C K E T M A L E T H R E A DP T F E P R E - A P P L I E D

PART-NUMBERS

F ØA B C ØD E G ALLEN KEY without collar with red collar with blue collar

R 1/8* 0.67 0.73 0.29 0.55 1.12 0.06 1/4” RPL 06.1150 RPL 06.1150/KR RPL 06.1150/KB

NPT 1/8 0.67 0.73 0.27 0.55 1.12 0.06 1/4” RPL 06.1250 RPL 06.1250/KR RPL 06.1250/KB

R 1/4 0.67 0.61 0.43 0.55 1.12 0.06 1/4” RPL 06.1151 RPL 06.1151/KR RPL 06.1151/KB

NPT 1/4 0.67 - 0.43 - 1.16 0.06 1/4” RPL 06.1251 RPL 06.1251/KR RPL 06.1251/KB

R 1/8 0.83 0.87 0.31 0.69 1.26 0.06 1/4” RPL 08.1150 RPL 08.1150/KR RPL 08.1150/KB


R 1/4 0.83 0.83 0.39 0.69 1.30 0.06 5/16” RPL 08.1151 RPL 08.1151/KR RPL 08.1151/KB


R 3/8 0.83 0.43 0.43 - 0.94 0.06 5/16” RPL 08.1152 RPL 08.1152/KR RPL 08.1152/KB

NPT 3/8 0.83 0.43 0.43 - 0.94 0.06 5/16” RPL 08.1252 RPL 08.1252/KR RPL 08.1252/KB

R 3/8 1.26 1.10 0.43 0.98 1.61 0.08 3/8” RPL 12.1152 RPL 12.1152/KR RPL 12.1152/KB


R 1/2 1.26 1.10 0.55 0.98 1.73 0.08 9/16” RPL 12.1153 RPL 12.1153/KR RPL 12.1153/KB


R 3/4 1.26 0.51 0.65 - 1.26 0.08 9/16” RPL 12.1154 RPL 12.1154/KR RPL 12.1154/KB

NPT 3/4 1.26 0.51 0.55 - 1.26 0.08 9/16” RPL 12.1254 RPL 12.1254/KR RPL 12.1254/KB

GEC B

ØD F ØA


7


3 . S T R A I G H T S O C K E T F E M A L E T H R E A D

4 . S T R A I G H T VA LV E D S O C K E T M A L E T H R E A D


2 . S T R A I G H T S O C K E T M E T R I C M A L E T H R E A D

PART-NUMBERS


F ØA B C E G without collar with red collar with blue collar

R 3/8 0.98 0.43 0.63 1.14 0.06 RPL 08.1152/ON/JV RPL 08.1152/ON/JV/KR RPL 08.1152/ON/JV/KB

PART-NUMBERS

RPL 06

RPL 08

RPL 08

RPL 12

RPL 08

F ØA B G ALLEN without collar with red collar with blue collarKEY

G 1/8 0.83 1.38 0.06 1/4” RPL 08.1100 RPL 08.1100/KR RPL 08.1100/KB

NPT 1/8 0.83 1.38 0.06 1/4” RPL 08.1200 RPL 08.1200/KR RPL 08.1200/KB

G 1/4 0.83 1.53 0.06 5/16” RPL 08.1101 RPL 08.1101/KR RPL 08.1101/KB

NPT 1/4 0.83 1.53 0.06 5/16” RPL 08.1201 RPL 08.1201/KR RPL 08.1201/KB

G 3/8 1.26 1.93 0.06 1/2” RPL 12.1102 RPL 12.1102/KR RPL 12.1102/KB

G 1/2 1.26 1.97 0.06 1/2” RPL 12.1103 RPL 12.1103/KR RPL 12.1103/KB

R P L 0 8 / O N I N S TA L L AT I O N T O O L

RPL 08.9000

PART-NUMBERS

I N S TA L L AT I O N D I M E N S I O N S O FT H E R P L 0 8 / O N I N T O T H E M O L D

Max. torque: 177 ot 236 oz.ft Ø0.

59

Ø0.

31m

in.

120°

90°

G3/

8H

Ø0.

67

0.87 min.

Ø0.

59

Ø0.

31m

in.

0.87 min.

0.51 min. 0.51

0.51 min.

120°

90°

G3/

8H

Ø0.

67

Ø0.

88

min

.

120°

90°

G3/

8H

Ø0.

67

0.87 min.

Ø0.

59

Ø0.

31m

in.

0.87 min.

0.51 min. 0.51

0

120°

90°

G3/

8H

Ø0.

67

Ø0.

88


PART-NUMBERS

F ØA B C ØD E G ALLEN KEY without collar with red collar with blue collar

M10x1 0.67 0.73 0.31 0.55 1.12 0.06 1/4” RPL 06.1410 RPL 06.1410/KR RPL 06.1410/KB

M10x1 0.83 0.87 0.31 0.69 1.26 0.06 1/4” RPL 08.1410 RPL 08.1410/KR RPL 08.1410/KB

M10x1,5 0.83 0.87 0.31 0.69 1.26 0.06 1/4” RPL 08.1411 RPL 08.1411/KR RPL 08.1411/KB

M14x1,5 0.83 0.83 0.31 0.69 1.26 0.06 5/16” RPL 08.1414 RPL 08.1414/KR RPL 08.1414/KB


E G

B

ØA

0.24/flats

B G

F

ØA

8


5 . S O C K E T 9 0 ° M A L E T H R E A D

F ØA B C D H/FLATS

R 1/8 0.87 0.87 0.39 0.51 0.75 RPL 08.1150/RE

R 1/4 0.87 0.87 0.47 0.51 0.75 RPL 08.1151/RE

NPT 1/4 0.87 0.87 0.55 0.51 0.75 RPL 08.1251/RE

R 3/8 0.87 0.87 0.51 0.51 0.75 RPL 08.1152/RE

PART-NUMBERS


6 . S O C K E T 1 3 5 ° M A L E T H R E A D

F ØA B C D H/FLATS

R 1/8 0.87 0.73 0.39 0.25 0.75 RPL 08.1150/RO

R 1/4 0.87 0.73 0.47 0.18 0.75 RPL 08.1151/RO

R 3/8 0.87 0.73 0.47 0.18 0.75 RPL 08.1152/RO


8 . PANEL/PLATE MOUNTED SOCKET 90° FEMALE THREAD

F ØA B C E G

G 1/4 0.87 0.87 0.83 0.25 max. 0.39 RPL 08.2101/RE

PART-NUMBERS

DIMENSIONS (in)

7 . PA N E L / P L AT E M O U N T E D S T R A I G H T S O C K E T

ØA B C E

0.87 1.38 0.90 0.39 max. RPL 08.2000

PART-NUMBERS

RPL 08

RPL 08

RPL 08

RPL 08

PART-NUMBERS

C

B

E

ØA

B

F

H/flats

C

ØA

D

H/flats

B

C

D

F

ØA

B

F E

ØA

C

G

9

DIMENSIONS (in)

1 . S T R A I G H T P L U G F O R H O S E

PART-NUMBERS

DIMENSIONS (in)

2 . P L U G 9 0 ° F O R H O S E

Øi ØA B C D with black collar with red collar with blue collar

1/4” 0.79 1.91 1.10 0.92 RPL 08.6806/RE RPL 08.6806/RE/KR RPL 08.6806/RE/KB






PART-NUMBERS

3 . P L U G 1 3 5 ° F O R H O S E

Øi ØA B C D with black collar with red collar with blue collar

1/4” 0.79 1.69 1.10 0.83 RPL 08.6806/RO RPL 08.6806/RO/KR RPL 08.6806/RO/KB






PART-NUMBERS

DIMENSIONS (in)

4 . S T R A I G H T P L U G F O R S E L F - L O C K I N G H O S E

Øi ØA B C Øj with black collar with red collar with blue collar

3/8" 0.79 2.44 0.96 0.77 RPL 08.6810/CN RPL 08.6810/CN/KR RPL 08.6810/CN/KB




PART-NUMBERS

RPL 08

RPL 08

RPL 08

RPL 08

RPL 12

RPL 12

RPL 12

RPL 12

RPL 06

Øi ØA B C with black collar with red collar with blue collar

5/16” 0.67 2.16 0.90 RPL 06.6808 RPL 06.6808/KR RPL 06.6808/KB

1/4” 0.79 2.60 1.10 RPL 08.6806 RPL 08.6806/KR RPL 08.6806/KB

5/16” 0.79 2.60 1.10 RPL 08.6808 RPL 08.6808/KR RPL 08.6808/KB

3/8” 0.79 2.60 1.10 RPL 08.6810 RPL 08.6810/KR RPL 08.6810/KB

1/2” 0.79 2.60 1.10 RPL 08.6812 RPL 08.6812/KR RPL 08.6812/KB

1/2” 1.10 3.07 1.30 RPL 12.6813 RPL 12.6813/KR RPL 12.6813/KB

5/8” 1.10 3.07 1.30 RPL 12.6816 RPL 12.6816/KR RPL 12.6816/KB

C

ØA

B

Øi

DC

ØA

B

Øi

C

ØA

B

Øi Øj

C

D

ØA

B

Øi

DIMENSIONS (in)

10

DIMENSIONS (in)

5 . P L U G 9 0 ° F O R S E L F - L O C K I N G H O S E

PART-NUMBERS

DIMENSIONS (in)

6 . P L U G 1 3 5 ° F O R S E L F - L O C K I N G H O S E

Øi ØA B C D Øj with black collar with red collar with blue collar

3/8" 0.791.69 0.96 0.83 0.77 RPL 08.6810/CN/RO RPL 08.6810/CN/RO/KR RPL 08.6810/CN/RO/KB

1/2" 0.791.69 1.14 0.90 0.92 RPL 08.6813/CN/RO RPL 08.6813/CN/RO/KR RPL 08.6813/CN/RO/KB

1/2" 1.10 2.83 1.14 1.08 0.92 RPL 12.6813/CN/RO RPL 12.6813/CN/RO/KR RPL 12.6813/CN/RO/KB

5/8" 1.10 2.83 1.44 1.06 1.06 RPL 12.6816/CN/RO RPL 12.6816/CN/RO/KR RPL 12.6816/CN/RO/KB

PART-NUMBERS

DIMENSIONS (in)

7 . S T R A I G H T P L U G F E M A L E T H R E A D

F ØA B with black collar with red collar with blue collar

G 1/4 0.79 1.91 RPL 08.6101 RPL 08.6101/KR RPL 08.6101/KB

NPT 1/4 0.79 1.91 RPL 08.6201 RPL 08.6201/KR RPL 08.6201/KB

G 1/2 1.10 2.40 RPL 12.6103 RPL 12.6103/KR RPL 12.6103/KB

NPT 1/2 1.10 2.48 RPL 12.6203 RPL 12.6203/KR RPL 12.6203/KB

PART-NUMBERS

DIMENSIONS (in)

8 . P L U G 9 0 ° F E M A L E T H R E A D

F ØA B C E with black collar with red collar with blue collar

G 1/4 0.79 1.91 0.65 1.22 RPL 08.6101/RE RPL 08.6101/RE/KR RPL 08.6101/RE/KBNPT 1/4 0.79 2.38 0.59 1.53 RPL 08.6201/RE RPL 08.6201/RE/KR RPL 08.6201/RE/KB

G 3/8 1.10 2.97 0.79 2.08 RPL 12.6102/RE RPL 12.6102/RE/KR RPL 12.6102/RE/KBNPT 3/8 1.10 2.97 0.79 2.08 RPL 12.6202/RE RPL 12.6202/RE/KR RPL 12.6202/RE/KB

PART-NUMBERS

DIMENSIONS (in)

9 . P L U G 1 3 5 ° F E M A L E T H R E A D

F ØA B C D with black collar with red collar with blue collar

G 1/4 0.79 1.69 0.55 1.08 RPL 08.6101/RO RPL 08.6101/RO/KR RPL 08.6101/RO/KBNPT 1/4 0.79 2.26 0.57 1.12 RPL 08.6201/RO RPL 08.6201/RO/KR RPL 08.6201/RO/KB

G 3/8 1.10 2.83 0.67 1.30 RPL 12.6102/RO RPL 12.6102/RO/KR RPL 12.6102/RO/KBNPT 3/8 1.10 2.83 0.67 1.30 RPL 12.6202/RO RPL 12.6202/RO/KR RPL 12.6202/RO/KB

PART-NUMBERS

THREADING

THREADING

THREADING

RPL 08

RPL 12

RPL 08

RPL 12

RPL 08

RPL 12

RPL 08

RPL 12

RPL 08

RPL 12

Øi ØA B C D Øj with black collar with red collar with blue collar

3/8" 0.79 1.91 0.96 0.92 0.77 RPL 08.6810/CN/RE RPL 08.6810/CN/RE/KR RPL 08.6810/CN/RE/KB

1/2" 0.79 1.91 1.14 1 0.92 RPL 08.6813/CN/RE RPL 08.6813/CN/RE/KR RPL 08.6813/CN/RE/KB



CD

ØA

B

ØjØi

ØA

B

C

D

Øi

Øj

ØA

B

C

D

F

ØA

B

CF

ØA

B

F

1 1

PLUG 90°RPL 08

TUBE

DIMENSIONS (in)

1 . R P L 0 8 B R I D G E

ØA B C

0.79 2.32 0.67 RPL 08.6000/RE

length of tube delivered = 39.37” R 113 910 00

PART-NUMBERS

Additional information on the rigid loop on pages 12 and 13.

2 . N I T R I L E S PA R E S E A L S U S E D O N P L U G S

R 603 507 11

R 600 007 11

R 600 011 10

PART-NUMBERS

3 . C O L O R I D E N T I F I C AT I O N C O L L A R F O R H O S E S

R 213 8

Commonpart

R 213 8

Ø COLLAR

13 (ø ext. hose: 0.51 to 0.67 in)

17 (ø ext. hose: 0.67 to 0.94 in)

24 (ø ext. hose: 0.94 to 1.10 in)

COLLAR COLOR

Blue collar: 7

Red collar: 3

COLLAR NUMBER

from 0 to 9

Packaging: bag of 25 red or blue collars of the same number

Packaging: bag of 10 units

4 . P R O T E C T I V E D U S T C A P

RPL 08.8500/100

PART-NUMBERS

Packaging: bag of 100 dust caps

H o w t o b u i l d y o u r p a r t - n u m b e r

Examples:

R 213 8 13 7 0 R 213 813 70(collar Ø 0.51 blue marked 0)

R 213 8 24 3 5 R 213 824 35(collar Ø 0.94 red marked 5)

Construction: yellow polyethylene

RPL 06

RPL 08

RPL 12

B

ØA

C

E N S U R E S C L E A N L I N E S S O F Y O U R C I R C U I T

1 2

A P P L I C AT I O N S

Loops between the exit of one cooling circuit andthe entry of the next cooling circuit:n reduces the number of flowmetersn supplies cold or warm water.

Max. admissible offset

Nominal distance between centers ± 0.02

RPL 08 BR IDGE

LOOPS FOR MOLD COOLING CIRCUITS

H A R D W E A R I N Gn The brass construction of the RPL 08 bridge gives

long term reliability.

REDUCED SPACE REQUIREMENT

n The design of the RPL 08 bridge makes for aneat and tidy solution.

E A S E O F M A I N T E N A N C E

n Plugs and pipe can be changed independently.n Seal changing is easy.

E A S E O F I N S TA L L AT I O Nn The design of the RPL 08 bridge allows for

installation with some misalignment.Max. admissible offset =nominal distance between centers x 0.02.

1 3

PART-NUMBERS

DIMENSIONAL DRAWING

RPL 08.6000/RERPL 08 plug

R 113 910 00Tube length = 39.37”

T E C H N I C A L C H A R A C T E R I S T I C S

n Use with unthreaded RPL 08 plugn Length of tube delivered: 39.37”

C o n s t r u c t i o n

Calibrated tube in cold-drawn brass

P R E PA R AT I O N O F T H E T U B E

n cutting to lengthLength of tubeL = (nominal distance between centers - 0.39) ± 0.02For example, if nominal distance betweencenters is 3.94”,L = (3.94 - 0.39) ± 0.02 = 3.54 ± 0.02

n machining of tube ends Ra 1,6

R5

R 0,5

15°

Area Ra 1,6

Nominal distance between centers ± 0.02 (min. centers = 1.38)

L ± 0.02

0.67

SIMULTANEOUS CONNECTIONAND DISCONNECTION OF THE TWO PLUGS

RPL 08.6000/RE PLUG

RPL 08 SOCKET

1.68

1;48

Length Ø 0.43 ± 0.004 0.59 min.

0.47 min.

Ø0.

43±

0.00

4

Ø0.

39

Ø0.

31m

ax.

DESCRIPTION PART-NUMBERS

14

ONE P IECE SOCKET EXTENDER

T H R E A D E D V E R S I O N

n RPL 08:3 lengths available in G 1/84 lengths available in G 1/4

S M O OT H V E R S I O N

n RPL 06: 1 length availablen RPL 08: 4 lengths availablen RPL 12: 3 lengths available

n 2 versions: smooth or threaded.

O N E P I E C E D E S I G Nwith thick walls for greater strength and rigidity

1 5

DIMENSIONS (in) PART-NUMBERS

S M O O T H V E R S I O N

DIMENSIONS (in)

T H R E A D E D V E R S I O N

L

øAøB

We reserve the right to modify product specifications without prior notice

L2G

øF

min

.

øC

F*

30

* parallel thread

Threading to be cut

RPL 06

RPL 08

RPL 08

RPL 12

ONE PIECE SOCKETEXTENDER

MOLD

CAVITY

INSTALLATION OF THE SOCKET EXTENDERS INTO THE MOLD

THREADING L ØA ØB L2 G ØC ØF ALLEN TORQUEto be cut min./max. min. KEY oz.ft without collar with red collar with blue collar

R 1/8

or 1.30/3.94 0.67 0.43 L-0.22 0.79 0.40 0.73 1/4” 118 RPL 06.1010/100/R RPL 06.1010/100/R/KR RPL 06.1010/100/R/KB

NPT 1/8

R 1/8 1.30/3.94 0.83 0.43 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/100/R RPL 08.1010/100/R/KR RPL 08.1010/100/R/KB


NPT 1/8 5.90/7.87 0.83 0.43 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/200/R RPL 08.1010/200/R/KR RPL 08.1010/200/R/KB

7.87/9.84 0.83 0.43 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/250/R RPL 08.1010/250/R/KR RPL 08.1010/250/R/KB




7.87/9.84 0.83 0.55 L-0.29 0.90 0.53 0.88 5/16” 354 RPL 08.1011/250/R RPL 08.1011/250/R/KR RPL 08.1011/250/R/KB







L L1 ØA L2 G ØC ØF ALLEN TORQUEmin./ threaded min. KEY oz.ftmax.

1.34/1.97 1.02 0.83 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/50/RF RPL 08.1010/50/RF/KR RPL 08.1010/50/RF/KBG 1/8 1.97/3.94 2.36 0.83 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/100/RF RPL 08.1010/100/RF/KR RPL 08.1010/100/RF/KB

3.94/5.90 2.36 0.83 L-0.22 0.90 0.40 0.88 1/4” 118 RPL 08.1010/150/RF RPL 08.1010/150/RF/KR RPL 08.1010/150/RF/KB1.51/1.97 1.04 0.83 L-0.29 0.90 0.53 0.88 5/16” 354 RPL 08.1011/50/RF RPL 08.1011/50/RF/KR RPL 08.1011/50/RF/KB

G 1/4 2.16/3.94 2.36 0.83 L-0.29 0.90 0.53 0.88 5/16” 354 RPL 08.1011/100/RF RPL 08.1011/100/RF/KR RPL 08.1011/100/RF/KB4.13/5.90 2.36 0.83 L-0.29 0.90 0.53 0.88 5/16” 354 RPL 08.1011/150/RF RPL 08.1011/150/RF/KR RPL 08.1011/150/RF/KB6.10/7.87 2.36 0.83 L-0.29 0.90 0.53 0.88 5/16” 354 RPL 08.1011/200/RF RPL 08.1011/200/RF/KR RPL 08.1011/200/RF/KB

L

F ØA

L1

PART-NUMBERS

without collar with red collar with blue collar

THRE

ADIN

GF

D1

00

.05

us

A

C O N N E C T W I T H S T Ä U B L I A L L O V E R T H E W O R L D

Sales coordination

Stäubli subsidiaries

Distributors

26/0

7/05

INTERNATIONAL SALES COORDINATIONSTÄUBLI FAVERGES - B.P. 70 - F - 74210 FAVERGES - Tel.: ++33 (0) 4 50 65 67 97 - Fax: ++33 (0) 4 50 65 60 69Internet: http://www.staubli.com - e-mail: [email protected]

is a registered trademark of STÄUBLI INTERNATIONAL AG

NORTH AMERICA(USA, Canada, Mexico)STÄUBLI CORPORATIONP.O. Box 189 - DUNCAN S.C. 29334Tel.: ++1 864/433-1980Fax : ++1 864/486-5498Toll free Number: 800/845 - 9193e-mail: [email protected]

UNITED KINGDOMSTÄUBLI (UK) LtdLodge Park,Hortonwood 30,TELFORD Shropshire TF1 7ETTel.: ++44 (0) 1952 671 918Fax: ++44 (0) 1952 608 579e-mail: [email protected]

BELGIUMSTÄUBLI BENELUX8501 BISSEGEM - Tel.: ++32 (0) 56 36 40 03e-mail: [email protected]

BRAZILSTÄUBLI COMÉRCIO, IMPORTAÇÃO,EXPORTAÇÃO E REPRESENTAÇÕES LTDA04709 110 SÃO PAULO-SPTel.: ++55 (0) 11 5182 7600e-mail: [email protected]

CHINASTÄUBLI (HANGZHOU) MECHATRONIC CO. LTD.Hangzhou Economic & TechnologicalHANGZHOU 310018 - Tel.: ++86 571 86912161e-mail: [email protected]

CZECH REPUBLIC, SLOVAKIASTÄUBLI Systems s.r.o.530 03 PARDUBICE - Tel.: ++420 466 616 125e-mail: [email protected]

FRANCESTÄUBLI RACCORD FRANCE91882 MASSY Cedex - Tel.: ++33 (0)1 69 93 25 00e-mail: [email protected]

GERMANY, AUSTRIASTÄUBLI Tec-Systems GmbH95410 BAYREUTH - Tel.: ++49 (0) 921/883-80e-mail: [email protected]

ITALYSTÄUBLI ITALIA S.p.A.20048 CARATE BRIANZA - Tel.: ++39 (0) 362/944.1e-mail: [email protected]

JAPANSTÄUBLI KKOSAKA 532-0011Tel.: ++81 6 6889 3308e-mail: [email protected]

POLANDSTÄUBLI Lodz Sp. z o.o.90319 LODZTel.: ++48 42 636 85 04

PORTUGALSTÄUBLI PORTUGAL REPRESENTAÇÕES LDA4475-330 MILHEIROS - MAIATel.: ++351 22 978 39 56/50

SINGAPOREMulti-Contact SEA Pte Ltd - STÄUBLISINGAPORE 628461Tel.: ++65 / 6266 0900

SPAINSTÄUBLI ESPAÑOLA08205 SABADELL(Barcelona)Tel.: ++34 937 205 405e-mail: [email protected]

SWITZERLANDSTÄUBLI A.G.8810 HORGEN/ZURICHTel.: ++41 (0) 43/244 22 33e-mail: [email protected]

TAIWANSTÄUBLI (HK) LTDTW - 104 TAPEITel.: ++886 2 2568 2744e-mail: [email protected]

TURKEYSTÄUBLI SANAYI MAKINEVE AKSESUARLARI TICARET LTD. STI.34670 IKITELLIISTANBULTel.: ++90 212/472 13 00e-mail: [email protected]

Documents

QUICK-RELEASE COUPLINGS RPL - Proplast · QUICK-RELEASE COUPLINGS RPL ... QUICK-RELEASE COUPLINGS NEW GENERATION 2 EVEN EASIER CONNECTION AND DISCONNECTION The RPL range is quick