QUICKNET COPPER CABLING SYSTEM - Minitran Ltd UK · PDF fileAs part of the complete QUICKNET™ Solution*, the PANDUIT® QUICKNET™ Copper Cabling System is a custom pre-terminated

Q U I C K N E T ™ C O P P E R C A B L I N G S Y S T E MQuick Deployment for High-Density Data Center Applications

2

Your network drives the critical data, voice, video and security

applications required to support your business. A pre-terminated

cabling system simplifies the delivery of those network services

by providing reliable infrastructure components assembled

and tested in a factory-controlled environment.

An end-to-end pre-terminated cabling system is an ideal

solution for data centers especially when time for traditional

cable installation, termination, and testing is limited.

Pre-terminated cable assemblies offer a simple plug-n-go

solution for links between LAN switches, servers, patch panels

and zone distribution areas, which enables easy additions

to current infrastructure or new installations.

BENEFITS OF A PRE-TERMINATEDCABLING SYSTEM

As part of the complete QUICKNET ™ Solution*, the PANDUIT ® QUICKNET ™ CopperCabling System is a custom pre-terminated cabling solution, designed to meet uniquestructured cabling requirements. Fast and simple to install, this high-density solutionprovides consistent network reliability and reduces initial on-site rework.

This leading-edge system delivers ensured performance for the lowest total cost of ownership.

Quick Network DeploymentPre-terminated cabling systems can be installed in 75% less time than field-termination methods, eliminating the need for on-site bundling, terminating, and testing. Moves, adds, and changes can be made immediately by existing on-site network professionals, increasing productivity relative to traditional field installations. This is critical for areas that require high security and limited access, as changes to the network can be made without scheduling outside personnel.

Consistent ReliabilityComponents are 100% tested and assembled in a factory-controlled environment ensuring more consistent network connections with optimum reliability as compared to those terminated on-site. This eliminates rework and keeps your project on schedule with maximum network uptime.

Innovative System ComponentsAssemblies are comprised of tuned components designed to deliver maximum channel performance and network reliability. Angled high-density patch panels are engineered to ensure optimum rack space utilization.

As a result, data centers can manage continuously evolving technologies more quickly and efficiently than ever before. An investment in a trouble-free, high performance infrastructure that leverages reliable, scalable components ensures overall system performance with the lowest cost of ownership.

*For QUICKNET ™ Fiber Optic Cabling System product information, refer to www.panduit.com/quicknetfiber.

3

Why Specify PANDUIT QUICKNET ™ Copper Cabling System?

Quick Deployment – 75% Less Installation Time than Field-Termination

Ease of Installation – Plug-n-Go Solution

Improved Reliability – 100% Factory Performance Tested

High Rack Density Utilization – Up to 48 ports in 1 RU

High Performing Cabling System – Supports Category 6 UTP and Category 6A (10GBASE-T) UTP/STP Applications

Custom Assemblies – Built to Your Specific Cabling Requirements

Short Lead Time – Meet Your Project Deadlines

4

World-Class QualityQUICKNET ™ Copper Cabling System components are manufactured to strict ISO quality procedures.

QUICKNET ™ Cable Assemblies are 100% performance tested to TIA/EIA electrical permanent link specifications (test report shipped with each assembly)Each assembly has a unique serial number for future traceabilityTX6 ™ Jack Modules undergo more than 90 additional quality checks for assured performance

World-Class Service and SupportAt PANDUIT, we respond quickly to customer needs and deliver exceptional service levels globally.

PANDUIT global sales and technical support teams work together to ensure the optimum solution is provided to meet your requirementsShort lead times and custom configurations keep your project on scheduleDesign tools facilitate customization and allow flexibility when designing the structured cabling infrastructure

Innovative DesignThe PANDUIT ® QUICKNET ™ Copper Cabling System incorporates innovative design features.

Built-in release mechanism on QUICKNET ™ Pre-Terminated Cassettes enables simpleinstallation and removal with one hand48-port (1 RU) high-density angled patch panels and PATCHRUNNER ™ Vertical Cable Managers quadruple rack density for reduced real estate costsQUICKNET ™ Adapter snaps in and out of QUICKNET ™ Patch Panels and accepts allMINI-COM ® Modules to provide flexibility and scalability for changing network requirementsQUICKNET ™ Plug Pack Assemblies facilitate quick and easy connection and disconnectionof cables to a variety of switches, reducing time and cost associated when installing andmaintaining structured cabling linksStaggered cable lengths ensure proper bend radius control and an aesthetic solutionJack modules, cable, and patch cords that are tuned to each other to delivermaximum channel performance and network reliability

Integrated release tabenables easy installationand removal of 6-port pre-terminated cassette

5

QUICKNET ™ Cable AssembliesOffer UTP Category 6 Cabling and UTP/STPCategory 6A Cabling (plenum and riser cablefire ratings)Pre-bundled with six cables for easy installationAvailable in 1 foot cable length increments from10 – 295 feet and different cable colors forredundant path applicationsMultiple termination types includingpre-terminated cassettes, jack modules,modular plugs, plug packs, and/or unterminated options

QUICKNET ™ Angled and Flat Patch PanelsAccept QUICKNET ™ Pre-Terminated Cassettes, which snap in and outwith one hand for quick installationAvailable in 24-port (1 RU) standard density and 48-port (1 RU)high-density configurationsAngled design allows cable to flow to each side of the rack and eliminates the need for horizontal cable managers by enabling patch cords to be routed directly into vertical cable managersProper identification of each port with pre-printed numbers above each port; vertical numbering from top to bottom of panel is alsoavailable for high density switch applications

QUICKNET ™ Patch Panel AccessoriesPatch panel adapter accepts MINI-COM ® Modules for UTP, fiber optic, and audio/video applicationsBlank patch panel adapter reserves space for future use while promoting proper airflow and coolingAdapters and blanks easily snap in and out of QUICKNET ™ Patch Panels

QUICKNET ™ Plug Packs allow multiple cables tobe installed simultaneously with one hand forspeed of deployment in switch applications

6

To simplify data center designs, PANDUIT has developed a library of PANDUIT products, represented as isometric shapes.Simply select PANDUIT products from the toolbar using a “drag and drop” feature to create customized design specifications.

Designers can utilize the cable routing function to estimate QUICKNET ™ Cable Assembly lengths.

A simple to use macro within the tool generates a PANDUIT Bill of

Material which can be saved within the AutoCAD* drawing or

exported to Excel^ for use in quote requests.

Additional functions include cable management and accessory

prompts for consideration to help ensure deployment

of a complete end-to-end system.

The PANDUIT Design Tool for

AutoCAD* is intended for designers

within the construction industry who

possess an intermediate-to-advanced

knowledge of AutoCAD*.

To request more information

regarding this tool, contact your local

PANDUIT sales representative or email [email protected].

*AutoCAD is a registered trademark of Autodesk, Inc.^EXCEL is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Speed the design of your data center with the PANDUIT Design Tool for AutoCAD*

Estimated cable assembly lengths are generated based on specified cable routing

Telecommunication rack is populated with management accessories for optimumcable management

The PANDUIT ® QUICKNET ™ Copper Cabling System exceeds the applicable permanent link requirements for Category 6A and Category 6 transmission over twisted-pair cabling. Each assembly is 100% performance tested at the factory. A Fluke* Linkware test report accompanies each cable assembly and will also be archived by PANDUIT(see figure 1). Because the cable assemblies are 100% factory tested, the time and cost associated with on-site fieldtesting is eliminated.

Permanent Link Compliance is tested for the following parameters:Insertion Loss (IL)Return Loss (RL)Near-End Crosstalk (NEXT)Power Sum Near-End Crosstalk (PSNEXT)Equal Level Far-End Crosstalk (ELFEXT)Power Sum Equal Level Far-End Crosstalk (PSELFEXT)Power Sum Alien Crosstalk for 10GBASE-T Systems (PSANEXT)**Power Sum Alien Attenuation to Crosstalk Ratio at the Far-End for 10GBASE-T Systems (PSAACR-F)**

*FLUKE is a registered trademark of Fluke Corporation.**PSANEXT and PSAACR-F results are available for Category 6A (10GBASE-T) assemblies, as an option, upon request by contacting PANDUIT customer service.

Figure 1 – FLUKE* Linkware test results accompany each cable assembly.

7

8

QUICKNET ™ Jack-to-Plug Cable Assembliesare ideal for cross-connect applications

QUICKNET ™ Copper and Fiber Cabling Systems arecompatible with PANZONE ® Enclosures and Boxes

for zone cabling applications

The QUICKNET ™ Copper Cabling System is integrated with the PANDUIT STRUCTUREDGROUND™

System to optimize network performance

For the full PANDUIT product offering, request PANDUIT ®

PAN-NET ® Network Solutions Catalog, SA-NCCB46.

9

QUICKNET ™ Plug Pack termination optionminimizes network downtime during switch

installation and maintenance

QUICKNET ™ Cassettes snap in and out of QUICKNET ™

Patch Panels allowing quick and reliable installation in server applications

QUICKNET ™ Cassettes snap in and out of QUICKNET ™

Patch Panels allowing easy access for moves,adds, and changes in switch or server applications

Bundled QUICKNET ™ Cable Assemblies are easily routed in ladder rack,

FIBERRUNNER ® or underfloor

PANDUIT delivers a complete pre-terminated copper and fiber optic solution to satisfy all data center installations. For QUICKNET ™ Fiber Optic Cabling System information, refer towww.panduit.com/quicknetfiber.

Q A – CATEGORY 6A(10GIG ™) UTP

P – Plenum B – Blue C – Cassette

H – Off White

R – Red

J – JackModules

10' – 295'(1 footincrements)

X – Noassemblyoptionsrequested

10

Custom Assembly Part Number Configurator

*Color option not available for modular plugs, shielded jack modules, or unterminated options. All modular plugs are clear and shielded jack modules are black. Plug packsavailable in B = Blue, W = White, L = Black, or R = Red.**Permanent link test results shipped with each cable assembly, alien crosstalk test results available as option for Category 6A cabling.***Custom cable assembly labels are available up to eighteen characters, individual cable labels are available up to fifteen characters.All custom cable assemblies are non-returnable, minimum order quantity one.

Notes: All connectivity is wired T568B. Category 6 Enhanced performance level utilizes PANDUIT ® TX6500™ Category 6 UTP Cable. Individual cassette and jack modules available as option when unterminated option is requested for on-site termination.

For QUICKNET ™ Fiber Optic Cabling System product information, refer to www.panduit.com/quicknetfiber.For QUICKNET ™ Plug Pack Assembly product information, refer to SA-COCB17.

Performance Level

CableFlameRating

Custom Assembly Part Number Configurator

B – Category 6Enhanced UTP

C – Category 6 UTP

E – Category 6A(10GIG™) STP

R – Riser

CableColor

W – White

TerminationEnd 1

J – JackModules

K – JackModulesStaggeredRight

L – JackModulesStaggeredLeft

P – ModularPlugs

Q – ModularPlugStaggeredRight

S – ModularPlugStaggeredLeft

TerminationEnd 1Color*

B – Blue

E – ElectricIvory

G – Green

I – Int'l Gray

L – Black

O – Orange

R – Red

V – Violet

W – White

Y – Yellow

TerminationEnd 2

C – Cassette

A – PlugPack (6 pack)

K – JackModulesStaggeredRight

P – ModularPlugs

L – JackModulesStaggeredLeft

Q – ModularPlugStaggeredRight

S – ModularPlugStaggeredLeft

U –Unterminated

TerminationEnd 2Color*

B – Blue

E – ElectricIvory

G – Green

H – OffWhite

I – Int'l Gray

L – Black

O – Orange

V – Violet

W – White

Y – Yellow

AssemblyOptions**

P – PullingEye

T – AlienCrosstalktest results

B – PullingEye andAlienCrosstalktest results

CustomLabeling***

1 2 3 4 5 6 7 8 9 10

AssemblyLength

11

N – CustomAssembly

12

X – No customlabelsrequested

L – Cableassemblylabel

C – Individualcable labels

B – Assemblyand individualcable labels

QUICKNET ™Cable Assemblies are customized to meet your unique structured cabling requirements. The table below shows all the options available within each feature which creates the custom part number.

For example, the part number QAPBCHJRXX10N is a 10 foot custom assembly made of UTP, Category 6A, plenum, bluecable with a pre-terminated cassette containing off white jacks on one end and red jacks on the other end.

11

TX6 ™ 10GIG™ UTP TX6 ™ 10GIG™ STP

UTP6X3Y

Length (Ft.)

3

Cable Color

International Gray

Patch Cords

STP6X3IG

TX6 ™ PLUS UTP

UTPSP3Y

UTP6X5Y 5 International GraySTP6X5IG UTPSP5Y





For additional lengths and colors, reference a PANDUIT ® PAN-NET ® Network Solutions Catalog, SA-NCCB46.For QUICKNET ™ Fiber Optic Cabling System product information, refer to www.panduit.com/quicknetfiber.For QUICKNET ™ Plug Pack Assembly product information, refer to SA-COCB17.

^One rack space = 1.75" (44.45mm).

Part Number Description

No. ofRack

Spaces^

Std.Pkg.Qty.

Std.Ctn.Qty.

Patch PanelsQPP24BL 24-port flat patch panel. 1 1 10

QPP48HDBL 48-port high-density flat patch panel. 1 1 10

QPP48HDVNSBL 48-port high density flat patch panel with pre-printed verticalnumbering on each port for switch applications.

1 1 10

QAPP24BL 24-port angled patch panel. 1 1 10

QAPP48HDBL 48-port high-density angled patch panel. 1 1 10

QAPP48HDVNSBL 48-port high-density angled patch panel with pre-printed verticalnumbering on each port for switch applications.

1 1 10

Patch Panel AdapterQPPABL 6-port patch panel adapter accepts MINI-COM ® UTP, fiber optic and

audio/video modules.— 1 10

Patch Panel BlankQPPBBL Reserves space for future use and promotes proper airflow

and cooling.— 1 10

Strain Relief BarSRB19BLY Cable strain relief bar extends 2" off of the rack to support cables in

patch panels.— 1 10

Quick Release BracketSRBBRKT Quick release brackets for strain relief bar; converts conventional

screw mounting of strain relief bar to quick release mounting/removal.— 1 10

Label KitQPPLC24 Label/label cover kit for 24-port QUICKNET ™ Patch Panels. Each kit

contains four labels and four clear label covers per bag.— 1 10

Equipment Jumper KitRGEJ1057PFY Kit includes jumper, bent lug, rack grounding strip, anti-oxidant paste

and thread-forming screws for shielded applications. (Recommend twokits for 48-port patch panels.)

— 1 10

Plug Pack AccessoriesQPPRT Removal tool allows individual cables to be removed from plug pack

without disruption of other network connections.— 1 10

QPPLD6-X Lock-in device prevents unauthorized removal of cables from theplug pack.

— 10 100

© 2008 PANDUIT Corp.ALL RIGHTS RESERVED

Printed in the U.S.A.Brochure Number SA-CPCB35

Replaces SA-CPCB294/2008

PANDUIT Europe Ltd.London, UK

[email protected]: 44.20.8601.7200

PANDUIT Australia Pty. Ltd.Victoria, Australia


PANDUIT Singapore Pte. Ltd.Republic of [email protected]

Phone: 65.6305.7575

PANDUIT JapanTokyo, Japan


PANDUIT Latin AmericaJalisco, Mexico


PANDUIT CanadaMarkham, Ontario

[email protected]: 800.777.3300

W O R L DW I D E L O C AT I O N S

For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty

PANDUIT Corp.Worldwide Headquarters

Tinley Park, Illinois 60477-3091

For more informationVisit us at www.panduit.com

Contact Customer Service by email: [email protected] by phone: 800-777-3300

Documents

QUICKNET COPPER CABLING SYSTEM - Minitran Ltd UK · PDF fileAs part of the complete QUICKNET™ Solution*, the PANDUIT® QUICKNET™ Copper Cabling System is a custom pre-terminated