8
AX 8042 AUTOMIXER ZX 8060 ZONER INSTALLED SOUND MATRIX MIXERS 2013 ENG

RCF ZX8060 + TS 9918

Embed Size (px)

DESCRIPTION

Matrix Mixer

Citation preview

Page 1: RCF ZX8060 + TS 9918
Page 2: RCF ZX8060 + TS 9918
Page 3: RCF ZX8060 + TS 9918

Courtrooms Hotels Entertainment

Great flexibility thanks to its unique design approach

40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB

8 universal inputs with 48V phantom facility and full audio processing, 4 hi-level routable outputs with full audio processing + 2 linkable outputs

10 programmable logic inputs (GPI) and 6 programmable logic outputs (GPO), 2 of which supported by relay

Two AX 8042 units are linkable to get a 16 input – 12 output solution

Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points

Configurable ALC (Automatic Level Control) facility by using Input 8 to connect a noise detection microphone. The control is then assignable to any output

or group of outputs.

USB connectivity for device configuration

Serial port for third-party system interface or dedicated RCF configurable touch remote control

Pluggable control module implementation AC RDNet IN/OU PLUG for RDNet Networking control

Fault monitoring feedback can be set on fail-safe GPO relay

24V DC auxiliary output available for third party utility commands

AX 8042 has 8 universal MIC-LINE inputs with selectable 48V phantom power on detachable Euroblock connectors, 4 of which are also pre-sent on RCA plugs.

INPUTS

AX 8042 has 6 outputs - 4 are balanced on detachable Euroblock terminals and are included in the audio matrix; the 2 remaining are available as RCA plugs.

OUTPUTS

In fact, dedicated TS 9918 touch sensitive flat remote controls can be used as simple control for devices in several projects, or as additional local controls in larger installations, where a networked centralized control system is required.RCF RDNet facility offer also a very simple and detailed real-time accessibility and monitoring for any of the enabled product throughout the whole installation: in fact a slot on rear panel allows the integration of an RCF RDNet module into the mixer, so to get control facility through RDNet networking devices too.Up to 12 paging microphones model BM 3003 can be daisy-chained to the dedicated RJ 45 connector, which can be used in alternative to input 1.Each of the 3 buttons can be configured to page zones or groups of zones. The consoles are interlocked on the same audio line and report in-use and busy indications.One relay GPO can be set to report in fail-safe mode the Fault unit monitoring, supported by a watchdog system.The front panel integrates several LED indicators to give feedbacks on audio inputs and outputs activities, serial communication ports link and GPI-GPO enabling, useful for configuration tests and debugging.The AX 8042 and ZX 8060 are a 19” 1U rack mounting device and employs a universal 50W power supply, 100-240VAC, 50/60Hz.

SPECIFICATIONS AX 8042Sampling Rate: 48KHzA/D-D/A Converters: 24bitMax. Input Level: Mic/line +24dBu BalMax. Gain: Mic to Output +50dB max.Max. Output Level: +24 dBu BalancedOutput Impedance: 50 OhmTHD + N (1KHz @ +22dBu): Analog In to Analog Out <0.01%CMRR (1KHz @ Gain:+50dB): >75 dBCrossTalk: < -90dBEIN (Gain: +50dB, 150Ohm term): -122dBm unweightedFreq.Response: 20Hz - 20KHz, ±0.5dBDynamic Range: >114 dBS/N Aweighted: >90dBAC Power: 100-240 VAC, 50/60HzPhantom Power: +48V

Page 4: RCF ZX8060 + TS 9918
Page 5: RCF ZX8060 + TS 9918
Page 6: RCF ZX8060 + TS 9918
Page 7: RCF ZX8060 + TS 9918
Page 8: RCF ZX8060 + TS 9918

MUSIC PROGRAM

MUSIC PROGRAM

ster

eo

ster

eo

MD 7800

WIRELESS MIC. TX 4016

3 Zone Paging MicrophonesBM 3003

Public Areas 100V MONO

Outdoor Area STEREO

Main EnvironmentSTEREO

BM 3003EMERG. SYS PRIOR. INPUT

GENERAL FAULTOUTPUT

DIGITALLINK

AMP

AMP

AMP

POWERED SPEAKERS

POWERED SUBWOOFERS

3rd partiesctrl system

serial interface

GPI/Ointerface

from/to othersystems

TS 9918

RD-NET LINKZX 8060

ZX 8060RD-NET LINK

TS 9918

PC

RISTO-PUB

MUSIC PROGRAM

DVR

AX 8042

ster

eo

ster

eo

MD 7800

MD 7800

MD 7800

WIRELESS MIC. TX 4016

AMP

C3110

C3110

3rd partiesctrl system

serial interface

GPI/Ointerface

from/to othersystems

RD-NET LINK

POWERED SUBWOOFERS

TS 9918

TS 9918

PC

GENERAL FAULTOUTPUT

MEETING ROOM

03/2

013-

SM10

4091

38