RecoverPoint & RecoverPoint for Virtual Machines, … · RecoverPoint & RecoverPoint for Virtual Machines, What’s new in 2017 ... ScaleIO and Non EMC Storage Using VPLEX RecoverPoint

RecoverPoint & RecoverPoint for Virtual Machines, What’s new in 2017

Yair Cohen, Director of Product Management, RecoverPoint Chris Mielke - Director of Infrastructure, Drake University

© Copyright 2017 Dell Inc. 2

Dell EMC Notifications

Forward Looking Statements Notice

This roadmap document contains “forward-looking statements” as defined under the Federal Securities Laws. Actual results or deliverables could differ materially from those projected in the forward-looking statements as a result of certain risk factors, including but not limited to: (i) adverse changes in general economic or market conditions; (ii) delays or reductions in information technology spending; (iii) risks associated with acquisitions and investments, including the challenges and costs of integration, restructuring and achieving anticipated synergies; (iv) competitive factors, including but not limited to pricing pressures and new product introductions; (v) the relative and varying rates of product price and component cost declines and the volume and mixture of product and services revenues; (vi) component and product quality and availability; (vii) the transition to new products, the uncertainty of customer acceptance of new product offerings and rapid technological and market change; (viii) insufficient, excess or obsolete inventory; (ix) war or acts of terrorism; (x) the ability to attract and retain highly qualified employees; (xi) fluctuating currency exchange rates; and (xii) other one-time events and other important factors disclosed previously and from time to time in EMC’s filings with the U.S. Securities and Exchange Commission. EMC disclaims any obligation to update any such forward-looking statements after the date of this roadmap document.

Copyright © 2017 Dell EMC Corporation. All rights reserved

ROADMAPS CAN CHANGE


RecoverPoint Family Two Great Products For Different Use Cases

Data Protection for Storage Arrays XtremIO, VMAX All Flash, Unity , VNX, VNXe, VNX-F, ScaleIO and Non EMC Storage Using VPLEX

RecoverPoint

RecoverPoint for VMS Data Protection for Virtual Machines VMware Environment


RecoverPoint Family Use Cases

Human errors Data corruptions Virus attacks

Natural disasters Accidents Utility outages Technical

malfunctions

Data center move Backup from copy Test & Dev

Disaster Recovery

Operational Recovery

Data Migration and Reuse


RecoverPoint Family Operations

Test PiT image, Move between PiT (DVR like) and Promote directly without restarting test for each PiT

Test a Copy / Test and Promote

Restore Production In-place Restore of Production Copy from Replica (local or remote) by sending back changes only (Ideal for Operational Recovery)

Failover Failover to Replica Copy either with Reverse Replication or without


Automated Protection Flow Protect a single or multiple virtual machines

Right click to protect VMs

Consistency Group

Policy Target VM Journal

Protected! Add to existing or create a new CG

Set RPO Sync/Async

Replica Datastore

Journal Datastore

1 2 3 4

• Automatically discover VMDK/VM configuration • Automatically create target VM & provision VMDKs and journals

• Target VM pre-seeding is also supported • Automatically replicate VM HW changes¹ & protect new VMDKs¹,²

Automatic provisioning fits 90% of customers use cases!

¹Can be turned off ²VMDK can also be excluded


Automated Recovery Flow Quickly Test Point-in-Time Image and Directly promote to Recover

Select Scope

Select Image

Testing Network

Test Copy!

Consistency Group/ Group Set

Point-in-Time selection

Use dedicated or “bubble”

Network

Promote

Failover/ Failback/ Production Restore

• Select image access scope from a single VM up to the entire environment • Set testing network - use dedicated or create new isolated (“Bubble”) network • Pre-defined orchestration is applied automatically during the image access • Continuous production VM protection while testing the Point-in-Time image

1 2 3 Initiate Image Access

DVR-like scroll between PiT

What’s New in RecoverPoint?

RecoverPoint for XtremIO

X2

RecoverPoint for VMAX

RecoverPoint for ScaleIO


RecoverPoint for VMAX

• NEW RecoverPoint for VMAX All Flash • Snapshot Based Replication using SnapVX

Homogenous and Heterogeneous Replication

Asynchronous local and remote replication

Minimum snapshot interval of 1 minute


Snapshot Based Replication – How does it work?

RPAs RPAs

Replica

Journal

App Host

WAN IP or FC

Primary / Production

Site

Replica / DR Site

1. RPAs and VMAX zoned to each other via FC

2. RP environment setup on the array

App Host

Production



RPAs RPAs Cluster

First Snapshot First Initialization Snapshot

First snapshot is created by RecoverPoint

The first snapshot is transferred and stored in the replica site by RecoverPoint

App Host

Production Replica

Journal

App Host

WAN IP or FC


Site

Replica / DR Site



RPAs RPAs Cluster


New Snapshot

Following snapshots are created at a frequency derived from RPO setting in the RP CG’s link policy

App Host

Production Replica

Journal

App Host

WAN IP or FC


Site

Replica / DR Site



RPAs RPAs Cluster


New Snapshot

DIFF SCSI

RecoverPoint sends vendor specific SCSI command to diff between the last transferred snapshot and the newly created snapshot

App Host

Production Replica

Journal

App Host

WAN IP or FC


Site

Replica / DR Site



RPAs RPAs


New Snapshot

Snap delta

DIFF Reply

RecoverPoint receives changes bit map from VMAX (64K tracking granularity) to track changes between snapshots

App Host

Production Replica

Journal

App Host

WAN IP or FC


Site

Replica / DR Site



RPAs RPAs Cluster


New Snapshot Snap delta

Snap delta

Snap delta

RecoverPoint will copy only the differences between the last transferred snapshot and the new snapshot to the replica site

App Host

Replica

Journal

App Host

WAN IP or FC


Site

Replica / DR Site

Production


RecoverPoint for XtremIO X2

• NEW RP for XtremIO new platform (X2-S and X2-R) • Journals and replica auto provisioning • 2x Scale & Performance

Max snaps per replicated CG 1024 Max volumes per CG 1024 Max protected volumes per cluster 1500 Max IOPS per RPA (up x8 RPA) 75K Max copies per CG 4 Max # volumes per XtremIO array 16K


Journal & Replica User Volumes Auto-Provisioning (XtremIO)

Auto create volumes

on target array Map Initiator Group Pair Source and

Target volumes Create Journal

Select Volumes to

protect Provisioning Mode

(Auto, Manual) Target Array

1 2 3

Replication is

started automatically


RecoverPoint for ScaleIO

• New RP for ScaleIO w/ Physical RPAs

Replication between SIO to SIO Heterogeneous Replication

between SIO and Other arrays Use RPA to replicate ScaleIO for

better performance

IP WAN

ScaleIO Cluster

Journal Repository Journal Repository Remote Copy

RPAs RPAs

What’s new in RecoverPoint for VMs

RP4VMs for EHC

RP4VMs for VSAN 6.x

Failover Network

Simpler Re-IP

Enhanced DR

Orchestration

Easier Deployment


RecoverPoint For Virtual Machines Operational And Disaster Recovery To Any Point In Time

• Disaster Recovery and Operational Recovery with VM-level granularity

• Integrated Management & Orchestration with VMware’s vCenter GUI

• Test, failover, failback and production recovery to any point-in-time per VM

• Software Only - Hypervisor based replication solution

• Storage agnostic


EASIER SIMPLER BETTER Easier Deployment

New Connect Clusters Wizard Easier Maintenance

Change to IP Communication


Network Setup Simplification

• No iSCSI (IP Connectivity between Splitter and vRPA) • Single VM on Remote Site (No Shadow VM on Remote Site)

EASIER SIMPLER BETTER

Production Site

vCenter vCenter Remote Site

WAN

1 VMware

ESXi 1 VMware

ESXi splitter splitter

Virtual Appliance Cluster

Virtual Appliance cluster

Plugin Plugin


Single vRPA vs vRPA Cluster

Single vRPA vRPA Cluster

• Low footprint • VMWare HA only • Smaller Environment e.g. VxRail • ROBO, POC, Tier-2

• Higher footprint • Cluster HA + VMWare HA • Larger Environment • Enterprise Tier-1



New Dashboard – Automatically remove standalone vRPA cluster using a dedicated external Uninstaller

tool • Single Pane of glass for all RP4VMs systems • Easier tracking of protection status

• Monitor: – System health status – vCenter Protection summary – CGs status – System alerts and statistics

• Zoom-in to Protection SLA per CG:

– RPO, Journal lag, Protection Window and Snapshot list view

–



vRPA Networking Considerations

Use Case SMB, Tier-2 Enterprise, Tier-1

# of vRPAs Single vRPA vRPA cluster

Port Groups 1 – All in One or

2 - Separated data path 2 – Separated data path

VMKernel ports 1 1

DHCP Optional Optional

• Easier networking configuration • Flexible number of port groups (1-4) • DHCP



New design for Re-IP

Manage IP settings through UI No scripts required No manual operations Single click to retrieve protected VM

settings Supports Microsoft and Linux

• Easier IP settings per VM via UI • Automatic MAC address replication

* Script based Re-IP capabilities is also available for backward compatibility



Pre-Defined Failover Network Configuration Assign Networks to be used when Failing-Over

• Define failover network per CG:

• Testing Point-in-Time: – User can choose the pre-defined failover network,

or a dedicated isolated network

• Promote to failover flow: – User can continue with current test network, or

use the pre-defined failover network

Pre-Defined Failover Network Configuration

• Pre-define failover network per CG


Enhanced Power-Up sequence

Set priority of VMs within a Consistency Group

Set priority of CGs within a Group Set Priorities range between 1 (first) to 5 (last) Power-up sequence will stop if a critical

VM fail to start

• Acknowledge VM boot before powering up next VM

* Script based Re-IP capabilities is also available for backward compatibility



Scale & Performance

• Improved Scale and Performance


V 4.3 V 5.1 # of Protected VMS per VC 2000 5000 2.5x # of CGs per Cluster 128 256 2x Throughput per vRPA 150 MB/s 300 MB/s 2x

Registered VM per VC 15K Unlimited

DRAKE University RP4VMs Experience


About Drake


Business goals


ARCHITECTURE


Product Recommendations


vRealize Automation Extension – Automatically remove standalone vRPA cluster using a dedicated external Uninstaller

tool • New RP4VMs Stand-Alone vRealize

Automation extension

• Self-service provisioning of instances with protection

• Assign protection SLA to blueprints • Replica VMs and RP4VM CGs are

automatically created • Day 2 actions available for end-users

– Bookmark, Test image, Failover, Recover Production


Want to try RP4VMs vRealize Extension?

Send Request to: [email protected]

RP4VMs Licensing


How to license RP4VMs ?

Per Socket < 1000 VMs / 150

Sockets

DP Suite for VMWare

DP Suite for Enterprise Per TB > 1000 VMs / 150

Sockets

RP4VMs Stand-alone Per VM

(Production Only) > 1000 VMs

RP4VMs Pack for SC/Unity 100/300 VMs pack


ReoverPoint for VMs Packs For SC/Unity

Large pack* Small pack*

For SC9000, SC7020, Unity600, Unity500. For SC5020/4020 SCv2/v3 Unity400/300

• Lower price than LUN-level replication • Lower price than direct RP4VM • Multi-site replication at the same price

Cost Effective • Local/remote replication (up to 4 sites) • Full DR/OR functionality • Orchestration & automation

Best Value

Heterogeneous replication solution to/from any array (VMWare env. only) Select one or more packs according to the array capacity

*Large -> 300 VMs. Small -> 100 VMs

RP4VMs & VSAN


Better Together – RP4VMs and VSAN

Virtual SAN

Any Deployment Choice

VxRail Ready Node Build Your Own

Any vSphere Datastore

VMFS NFS VVOL

Any Application

vSphere


Virtual SAN + RecoverPoint for VMs

4

vSphere + Virtual SAN

vCenter RP4VMs Plugin

vSphere APIs for IO Filters (VAIO)

vSphere + Virtual SAN

RP vRPA

RP vRPA

vCenter based Management: • Policy-based provisioning • Monitoring of protection status (RPOs, Journal state etc.)

Local Protection: • Production VM restore to any PIT (“DVR for VMs”) • Multi-VM consistency groups

Remote Protection and DR: • Recovery of single VMs or multiple VMs (at a

consistency group or group set level) • SRM-style orchestration of recovery procedures

RP vRPA

RP vRPA


Want To Win A Levitating Death Star Speaker?

• Follow @DellEMCProtect while at Dell EMC World

• 2 Winners will be chosen daily from

Monday May 8 to Thursday May 11 • All winners will be notified through

Twitter Direct Message

NO PURCHASE NECESSARY. Ends 05/11/2017. To enter and for Official Rules, visit http://thecoreblog.emc.com/dell-emc-world-follow-win-sweepstakes-2017/

Thank You !

Documents

RecoverPoint & RecoverPoint for Virtual Machines, … · RecoverPoint & RecoverPoint for Virtual Machines, What’s new in 2017 ... ScaleIO and Non EMC Storage Using VPLEX RecoverPoint