Ref. No. 3947 SERVICE MANUALSERVICE MANUAL 072006

ON STANDBY

DISPLAY

MENU

SETUP

TOP MENU

RETURN

AUDIO ANGLE SUBTITLE ZOOM

RC-616DV

CLEAR

OPEN/CLOSE

ENTER

1 2 3

6

7 8 9

0

4 5

PLAY MODE

DV-SP404

SERVICE MANUALSERVICE MANUAL

DVD PLAYER

Black and Silver models

MODEL DV-SP404

Ref. No. 3947072006

110-240V AC, 50/60Hz120V AC, 60Hz

BTUA, STUABTDD, STDD

(For USA/Canada, Black/ Silver)

RC-616DV

SAFETY-RELATED COMPONENT WARNING!!COMPONENTS IDENTIFIED BY MARK ON THE

SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE

CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.

REPLACE THESE COMPONENTS WITH ONKYO

PARTS WHOSE PART NUMBERS APPEAR AS SHOWN

IN THIS MANUAL.

MAKE LEAKAGE-CURRENT OR RESISTANCE

MEASUREMENTS TO DETERMINE THAT EXPOSED

PARTS ARE ACCEPTABLY INSULATED FROM THE

SUPPLY CIRCUIT BEFORE RETURNING THE

APPLIANCE TO THE CUSTOMER.

A1-1

CAUTION

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE-FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE,CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THANTHOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE.VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOTSTARE INTO BEAM.

PREPARATION OF SERVICING

The laser diode used for a pickup head may be destroyed with external static electricity.Moreover, even if it is operating normally after repair, when static electricity discharge is received at thetime of repair, the life of the product may be shortened.Please perform the following measure against static electricity, be careful of destruction of a laser diodeat the time of repair.

• Place the unit on a workstation equipped to protect against static electricity, such as conductive mat.• Soldering iron with ground wire or ceramic type is used.• A worker needs to use a ground conductive wrist strap for body.

A1-2

IMPORTANT SERVICE SAFETY INFORMATION

Safety precautions to be followed during servicing:

1.

2.

Parts marked with an are critical parts for safety. Replace only with the one described in the partslist.Before returning the DVD product to the customer, make the appropriate leakage current check orresistance measurements to ensure that exposed parts are properly insulated from the supply circuit.

A leakage current check is recommended for this unit. Plug the AC line cord directly into a 120V 60Hz ACoutlet (do not use an isolation transformer for this check). Use a leakage current tester (Fig. 1) or ametering system which complies with Underwriters Laboratories (UL 1492). Measure for current from allexposed metal parts of the cabinet to a known earth ground: particularly, any exposed metal part having areturn path to the chassis. Any current measured must not exceed 0.5mA. Any measurement not withinthe limits outlined above are indicative of a potential shock hazard and corrective action must be takenbefore returning the unit to the customer.

KNOWN EARTHGROUND

1.5K ohm0.15 µF

(Reading should not be above 0.5mA)

Leakage Current Tester

TEST PROBETest all exposedmetal surfaces

PRODUCT UNDER TEST

2-Blade polarizedtype cord set

Fig. 1 AC Leakage Test

A1-3

IMPORTANT SAFEGUARDS1.

2.

3.

4.

5.

6.

7.

8.

8A.

9.

10.

11.

12.

13.

14.

15.

16.

READ INSTRUCTIONSAll the safety and operating instructions should be read before the unit is operated.RETAIN INSTRUCTIONSThe safety and operating instructions should be retained for future reference.HEED WARNINGSAll warnings on the unit and in the operating instructions should be adhered to.FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.CLEANINGUnplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dampcloth for cleaning.ATTACHMENTSDo not use attachments not recommended by the unit’s manufacturer as they may cause hazards.WATER AND MOISTUREDo not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wetbasement, or near a swimming pool.ACCESSORIESDo not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer.An appliance and cart combination should be moved with care. Quick stops,excessive force, and uneven surfaces may cause the appliance and cartcombination to overturn.VENTILATIONSlots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliableoperation of the unit, and to protect it from overheating. These openings must not be blocked or covered. Theopenings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unitshould never be placed near or over a radiator or heat source. This unit should not be placed in a built-ininstallation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructionshave been adhered to.POWER SOURCESThis unit should be operated only from the type of power source indicated on the rating plate. If you are not sureof the type of power supply to your home, consult your appliance dealer or local power company. For unitsintended to operate from battery power, or other sources, refer to the operating instructions.GROUNDING OR POLARIZATIONThis unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plugfully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace yourobsolete outlet. Do not defeat the safety purpose of the polarized plug. If your unit is equipped with a 3-wiregrounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type poweroutlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician toreplace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.POWER-CORD PROTECTIONPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed uponor against them, paying particular attention to cords at plugs, convenience receptacles, and the point where theyexit from the appliance.LIGHTNINGTo protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unitdue to lightning and power line surges.POWER LINESAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light orpower circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,extreme care should be taken to keep from touching such power lines or circuits, as contact with them might befatal.OVERLOADINGDo not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.OBJECT AND LIQUID ENTRYDo not push objects through any openings in this unit, as they may touch dangerous voltage points or short outparts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

PORTABLE CART WARNING(symbol provided by RETAC)

S3125A

A1-4

IMPORTANT SAFEGUARDS (CONTINUED)

OUTDOOR ANTENNA GROUNDINGIf an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is groundedso as to provide some protection against voltage surges and built-up static charges. Section 810 of the NationalElectrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location ofantenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.SERVICINGDo not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltageor other hazards. Refer all servicing to qualified service personnel.DAMAGE REQUIRING SERVICEUnplug this unit from the wall outlet and refer servicing to qualified service personnel under the followingconditions:

REPLACEMENT PARTSWhen replacement parts are required, be sure the service technician uses replacement parts specified by themanufacturer or those that have the same characteristics as the original parts.Unauthorized substitutions may result in fire, electric shock or other hazards.SAFETY CHECKUpon completion of any service or repairs to this unit, ask the service technician to perform safety checks todetermine that the unit is in proper operating condition.WALL OR CEILING MOUNTINGThe product should be mounted to a wall or ceiling only as recommended by the manufacturer.HEATThe product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts (including amplifiers) that produce heat.DISC TRAYKeep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.CONNECTINGWhen you connect the product to other equipment, turn off the power and unplug all of the equipment from thewall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual ofthe other equipment carefully and follow the instructions when making any connections.SOUND VOLUMEReduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume soundmay cause hearing or speaker damage.SOUND DISTORTIONDo not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.HEADPHONESWhen you use the headphones, keep the volume at a moderate level. If you use the headphones continuouslywith high volume sound, it may cause hearing damage.LASER BEAMDo not look into the opening of the disc tray or ventilation opening of the product to see the source of the laserbeam. It may cause sight damage.DISCDo not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.NOTE TO CATV SYSTEM INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that providesguidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to thegrounding system of the building, as close to the point of cable entry as practical.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

a.b.c.d.

e.f.

When the power-supply cord or plug is damaged.If liquid has been spilled, or objects have fallen into the unit.If the unit has been exposed to rain or water.If the unit does not operate normally by following the operating instructions. Adjust only those controls thatare covered by the operating instructions, as an improper adjustment of other controls may result indamage and will often require extensive work by a qualified technician to restore the unit to its normaloperation.If the unit has been dropped or the cabinet has been damaged.When the unit exhibits a distinct change in performance, this indicates a need for service.

A1-5

EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

ANTENNADISCHARGE UNIT(NEC SECTION 810-20)

ANTENNA LEADIN WIRE

GROUNDING CONDUCTORS(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)

GROUNDCLAMP

ELECTRIC SERVICEEQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

S2898A

IMPORTANT SAFEGUARDS (CONTINUED)

SERVICE MANUAL

DV-SP404 (For USA/CANADA, SILVER)

Design and specifications are subject to change without notice.

DVD VIDEO PLAYER

SUPPLEMENTMFR'S VERSION A

This SUPPLEMENT must be used together SERVICE MANUAL for DV-SP404 (For USA/CANADA,

BLACK).

All other test and repair procedures are as shown in the ORIGINAL MANUAL.

Please file this SUPPLEMENT with the ORIGINAL VERSIONS.

PART NO. DESCRIPTION PART NO. DESCRIPTION

101 7A701A785A FRONT CABI ASS'Y 7A701A798A FRONT CABI ASS'Y

101A 701WPBA069 CABINET FRONT 701WPBA073 CABINET FRONT

101B 701WADA004 PANEL FRONT 701WADA005 PANEL FRONT

101C 711WPAA143 PLATE DISPLAY 711WPAA146 PLATE DISPLAY

101D 712WPJC280 FLAP DVD 712WPJC283 FLAP DVD

101F 723656A002 BADGE BRAND 723656A003 BADGE BRAND

101H 737WPAA018 BUTTON CAP 737WPEA020 BUTTON CAP

101I 737WPA0027 BUTTON CAP EJECT 737WPE0033 BUTTON CAP EJECT

101L 738WPJA030 BUTTON FRAME 1 738WPJA035 BUTTON FRAME 1

101N 724000A009 SHEET PC

110 702WSBA071 CABINET TOP 702WSBA070 CABINET TOP

206 8109K3060S SCREW TAP TITE(B) BIND(3D) 3x6 8109K3060U SCREW TAP TITE(B) BIND(3D) 3x6

208 811022680S SCREW TAP TITE(P)BIND 2.6x8 811022680U SCREW TAP TITE(P)BIND 2.6x8

--- 723000D382 CARTON LABEL 723000D388 CARTON LABEL

--- 793WCDD254 GIFT BOX 793WCDD275 GIFT BOX

MECHANICAL REPLACEMENT PARTS LIST

DV-SP404 (For USA/CANADA, BLACK) DV-SP404 (For USA/CANADA, SILVER)

REF. NO.

MECHANICAL EXPLODED VIEWDV-SP404 (For USA/CANADA, SILVER)

ADD: 101N

101E

101C

101L

101H

101J

101K

101I101G

101A

101M

101D

101

208

101B

101F

208

208

101N

A1-6

Before removing Pick Up PCB and DVD PCB connector, the short circuit the position shown in Fig. 1using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged.

WHEN REPLACING DVD DECK

[ When removing the DVD Deck ]

[ When installing the DVD Deck ]

Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVDPCB connector.

NOTE

Fig. 1

Short circuit using asoldering iron.

Pick Up PCB

Before your operation, please read “PREPARATION OF SERVICING”.Use the Lead Free solder.Manual soldering conditions• Soldering temperature: 320 ± 20˚C• Soldering time: Within 3 seconds• Soldering combination: Sn-3.0Ag-0.5CuWhen Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to keep theFlux smoke away from it.

•••

•

If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the stepsbelow.

Set the DVD to the Stand-by Mode.Press and hold the 'STOP' key on the front panel.Simultaneously press and hold the POWER key on the front panel.The 4 digit password has now been cleared.

1.2.3.4.

PARENTAL CONTROL - RATING LEVEL4 DIGIT PASSWORD CANCELLATION

NOTE: The above procedure will reset ALL of the player's settings to the default factory state.

The laser diode used for a pickup head may be destroyed with external static electricity.Moreover, even if it is operating normally after repair, when static electricity discharge isreceived at the time of repair, the life of the product may be shortened.Please perform the following measure against static electricity, be careful of destruction of alaser diode at the time of repair.

• Place the unit on a workstation equipped to protect against static electricity, such as conductive mat.• Soldering iron with ground wire or ceramic type is used.• A worker needs to use a ground conductive wrist strap for body.

PREPARATION OF SERVICING

A1-7

Slide the Rack Loading (White) toward the arrow direction by using a minus driver to release the lock.(Refer to Fig. 1)Manually open the Tray.

Please strongly pushing Rack Loading (White) to release the lock because the tray doesn't go outeasily.

1.

2.

Fig. 1

Rack Loading (White)

DVD Player (Bottom Side)

NOTE:

DISC REMOVAL METHOD AT NO POWER SUPPLY

PCBs (manufactured) using lead free solder will have a PbF printing on the PCB.

(Please refer to figures.)

Caution:Pb free solder has a higher melting point than standard solder;

Typically the melting point is 86°F~104°F(30°C~40°C) higher.

Please use a soldering iron with temperature control and adjust it to 650°F ± 20°F (350°C ± 10°C).

In case of using high temperature soldering iron, please be careful not to heat too long.

Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C).

All products with the printed circuit board with PbF printing must be serviced with lead free solder.

When soldering or unsoldering, completely remove all of the solder from the pins or solder area,

and be sure to heat the soldering points with the lead free solder until it melts sufficiently.

Distinction of PbF PCB:

Recommendations

Recommended lead free solder composition is Sn-3.0Ag-0.5Cu.

ABOUT LEAD FREE SOLDER (PbF)

•

••

A1-8

A2-1

TABLE OF CONTENTS

A1-1

A1-2

A1-3~A1-5

A1-6

A1-7

A1-7

A1-7

A1-8

A2-1

A3-1~A3-5

B1-1

B2-1~ B2-4

B3-1, B3-2

C-1

C-1

D-1~D-6

E-1, E-2

E-3, E-4

E-5, E-6

F-1, F-2

F-3, F-4

F-5, F-6

G-1, G-2

G-3, G-4

G-5, G-6

G-7, G-8

G-9, G-10

G-11, G-12

G-13, G-14

G-15, G-16

G-17, G-18

G-19, G-20

G-21, G-22

H-1

I1-1, I1-2

I2-1

J1-1

J2-1

J3-1~J3-4

CAUTION .............................................................................................................................................................

IMPORTANT SERVICE SAFETY INFORMATION .............................................................................................

IMPORTANT SAFEGUARDS ..............................................................................................................................

WHEN REPLACING DVD DECK ........................................................................................................................

DISC REMOVAL METHOD AT NO POWER SUPPLY ........................................................................................

PARENTAL CONTROL- RATING LEVEL ..........................................................................................................

PREPARATION OF SERVICING ........................................................................................................................

ABOUT LEAD FREE SOLDER (PbF) .................................................................................................................

TABLE OF CONTENTS .......................................................................................................................................

GENERAL SPECIFICATIONS ............................................................................................................................

DISASSEMBLY INSTRUCTIONS

1.REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS .........................................................................

2.REMOVAL OF DVD DECK PARTS ...............................................................................................................

3.REMOVAL AND INSTALLATION OF FLAT PACKAGE IC ...........................................................................

SERVICING FIXTURES AND TOOLS ................................................................................................................

RE-WRITE FOR DVD FIRMWARE .....................................................................................................................

TROUBLESHOOTING GUIDE ............................................................................................................................

BLOCK DIAGRAMS

DVD LOADER/MPEG .......................................................................................................................................

POWER ............................................................................................................................................................

OVERALL BLOCK DIAGRAM .............................................................................................................................

PRINTED CIRCUIT BOARDS

DVD MT ............................................................................................................................................................

POWER/OPERATION/OPERATION 2/OPERATION 3/OPERATION 4 ...........................................................

LOADING MOTOR/SW .....................................................................................................................................

SCHEMATIC DIAGRAMS

MPEG/MICON/DSP ..........................................................................................................................................

MEMORY ..........................................................................................................................................................

LOADER/MOTOR DRIVE .................................................................................................................................

AUDIO JACK .....................................................................................................................................................

VIDEO JACK .....................................................................................................................................................

HDMI .................................................................................................................................................................

POWER PORT ..................................................................................................................................................

POWER .............................................................................................................................................................

DISPLAY ...........................................................................................................................................................

LOADING MOTOR/SW .....................................................................................................................................

INTERCONNECTION DIAGRAM .........................................................................................................................

WAVEFORMS ......................................................................................................................................................

MECHANICAL EXPLODED VIEW .......................................................................................................................

DVD DECK EXPLODED VIEW ............................................................................................................................

MECHANICAL REPLACEMENT PARTS LIST ...................................................................................................

DVD DECK REPLACEMENT PARTS LIST .........................................................................................................

ELECTRICAL REPLACEMENT PARTS LIST .....................................................................................................

GENERAL SPECIFICATIONS

G-1 DVD System Color System NTSC

Disc

DVD-R/RW, DVD+R/+RW (w/o VCPS)

Disc Diameter 120 mm , 80 mm

Drive DM4PB

Search speed Fwd 4 step

Fwd-Actual 4, 8, 16, 32 times

Rev 4 step

Rev-Actual 4, 8, 16, 32 times

Slow speed Fwd 4 step

Fwd-Actual 1/16, 1/8, 1/4, 1/2 times

Rev 4 step

Rev-Actual 1/16, 1/8, 1/4, 1/2 times

Zoom Zoom 2 step

Zoom-Actual 2, 4 times

G-2 Power Power Source AC 120V 60Hz

DC --

Power Consumption 7 W

Stand by 0.9 W

Per Year -- W

Energy Star No

Protector Power Fuse Yes

Safety Circuit Yes

IC Protector (Micro Fuse) No

G-3 Regulation Safety UL/CSA(C-UL)

Radiation FCC/IC

Laser DHHS

G-4 Temperature Operation 5 oC - 40 oC

Storage -20 oC - 60 oC

G-5 Operating Humidity Less than 80% RH

G-6 Signal Video Signal Output Level 1 V p-p / 75 ohm

S/N Ratio (Weighted) 65 dB

Horizontal Resolution at DVD 500 Lines

RGB Signal Output Level --

Component Video Output Level (Y) 1.0V p-p / 75 ohm

Output Level (Cb, Cr) 0.7V p-p / 75 ohm

Audio Signal Input Level Microphone --- dBm / --- ohm

Output Level Line

S/N Ratio at (Weighted) 90dB

Harmonic Distortion : 0.0065% (1KHz)

Frequency Response : at DVD 4 Hz - 44 KHz (96KHz)

Frequency Response : at SVCD 4 Hz - 20 KHz

Frequency Response : at VIDEO CD 4 Hz - 20 KHz

Frequency Response : at CD 4 Hz - 20 KHz

Frequency Response : at DVD Audio --

Frequency Response : at SACD --

0.5 V p-p / 75 ohm

G-7 OSD Language English/French/Spanish/German/Italian

DVD, CD-DA, CD-R/RW, Video CD, SVCD

-12 dBm/ 1k ohm (-20dBFs, 0dBFs=2.0Vrms)

Digital Audio Signal Output Level

A3-1


G-8 Remote Control Unit Unit RC-LP

Glow in Dark Remocon No

Remocon Format ONKYO

Format NEC

Custom Code D2-2B

Power Source Voltage (D.C) 3V

UM size x pcs UM-3 x 2 pcs

Total Keys 36 Keys

Power ON Yes

Power Off (STAND BY) Yes

Open/Close Yes

Audio Yes

Subtitle Yes

Angle Yes

1 Yes

2 Yes

3 Yes

4 Yes

5 Yes

6 Yes

7 Yes

8 Yes

9 Yes

0 Yes

Clear Yes

Enter Yes

Top Menu Yes

Menu Yes

Set up (Home Menu) Yes

Return Yes

Up Yes

Down Yes

Right Yes

Left Yes

Enter No

<< (Scan/Slow/Step) Yes

>> (Scan/Slow/Step) Yes

Play Yes

|<< (Search) Yes

>>| (Search) Yes

Pause Yes

Stop Yes

Play Mode Yes

Surround No

Zoom Yes

Display Yes

Key Control b No

Key Control # No

A3-2


G-9 DVD Features Progressive Video Out Yes

Echo No

Mic Mixing No

Digital Out (Dolby Digital) Yes

(MPEG) Yes

(PCM) Yes

(DTS) Yes

Down Mix Out (Dolby Digital) Yes

(DTS) No

(SACD) No

(DVD Audio) No

Surround MTK original Surround

Screen Saver Yes

Auto Stop No

BNR No

Dynamic Range Control Yes

Disc Navigator Yes

Video CD Playback Yes

SVCD Playback Yes

SACD Playback No

DVD Audio Playback No

DivX Playback Yes

DMF Support No

VR Format Playback Yes

Fujicolor CD Yes

KODAK Picture CD Yes

MP3 Playback Yes

WMA Playback Yes

JPEG Playback Yes

Audio DAC 96kHz / 24bit

Auto Power Off Yes

Yes

G-10 Accessories Owner's Manual Language English

w/Guarantee Card No

Remote Control Unit Yes

Guarantee Card Yes

Warning Sheet No

Service Station List No

Important Tag No

AC Plug Adapter No

Quick Set-up Sheet No

Battery Yes

UM size x pcs UM-3 x 2 pcs

OEM Brand No

AC Cord No

AV Cord Yes (1.2m)

1Pin RCA Cable Yes (1.2m)

HDMI Cable No

S-Video Cable No

21pin Cable (Double Shield) No

800 No Sticker No

Toll Free Insert Sheet No

Safety Tip No

Security Tag No

Sheet Information (Return) No

Registration Card No

Netflix Sheet No

Helpline Sheet No

Helpline Sticker No

Information Sheet No

Closed Caption signal in VBI (DVD Playback)

A3-3


G-11 Interface Switch-Front Standby/On Yes

Play Yes

Open/Close Yes

Skip (>>|) Yes

Skip (|<<) Yes

Pause Yes

Stop Yes

Top Menu Yes

Home Menu Yes

Menu Yes

Return Yes

Enter Yes

Up Yes

Down Yes

Right Yes

Left Yes

Shuttle (Search/REV/FWD) No

Main Power SW No

Display Yes

DISPLAY Type Fluorescent Indicator

Pause/Play Yes

Progressive Yes

DVD No

Remain Yes

Surround No

Track No

A No

-B No

Video No

CD No

All No

PROG No

Mic Mark No

Title Yes

Repeat Yes

Angle Yes

Chapter Yes

Music Calendar (1-14, Play) No

7-seg Digit (8) Yes

Terminals-Front Mic In No

Volume Control No

Echo Control No

Terminals-Rear Video Output RCA x 1

S-Video Output S-Jack x1

Component Video Output RCA x3 (Y, Cr, Cb)

D1 No

Audio Output RCA x 2 (Stereo)

Euro Scart No

Digital Audio Output RCA x 1 (Digital Audio)

5.1ch Audio Output No

HDMI Output Yes

AC Inlet No

Indicator HDMI Yes(Red)

G-12 Set Size Dimensions (Approx.) W x D x H (mm) 435 x 208 x 60.5

G-13 Weight Net (Approx.) 1.9kg ( 4.2 lbs)

Gross (Approx.) 2.8kg ( 6.2 lbs)

A3-4


G-14 Carton Master Carton No

Content --- Sets

Material --- / ---

Dimensions W x D x H (mm) ---

Description of Origin ---

Gift Box Material Single/Brown

W/Color Photo Label No

Dimensions W x D x H (mm) 507 x 290 x 130

Description of Origin Yes

Drop Test Natural Dropping At 1 Corner / 3 Edges /6 Surface

Height (cm) 80cm

Container Stuffing 3,220 Sets/40' container

G-15 Cabinet Material Cabinet Front PS 94V2 or More / NON DECABROM

PCB Non-Halogen Demand No

Eyelet Demand No

G-16 Environment Green procurement of Pioneer

WEEE No

Pb-free Phase3 (Phase3A)

Measures for Whisker Yes

Environmental standard requirement (by buyer)

A3-5


B1-1

1. REMOVAL OF MECHANICAL PARTSAND P.C. BOARDS 1.

2.

3.4.

Short circuit the position shown in Fig. 1-3 using asoldering iron. If you remove the DVD Deck with nosoldering, the Laser may be damaged.Disconnect the following connectors:(CP2301, CP2302, CP2303).Remove the 4 screws 1.Remove the DVD Deck in the direction of arrow.

1-3: DVD DECK (Refer to Fig. 1-3)

Fig. 1-3

DVD Deck

1

11

1

Short circuit using asoldering iron.

Pick Up PCB

NOTE

Before your operation, please read “PREPARATIONOF SERVICING”.Use the Lead Free solder.Manual soldering conditions• Soldering temperature: 320 ± 20˚C• Soldering time: Within 3 seconds• Soldering combination: Sn-3.0Ag-0.5CuWhen Soldering/Removing of solder, use the drawingequipment over the Pick Up Unit to prevent the Fluxsmoke from it.When installing the DVD Deck, remove all the solderingon the short circuit position after the connection of PickUp PCB and DVD MT PCB connector.

1.

2.3.

4.

5.

1-4: DVD MT PCB (Refer to Fig. 1-4)

1.2.3.4.

Remove the 3 screws 1.Remove the screw 2.Remove the 4 screws 3.Remove the DVD MT PCB in the direction of arrow.

Fig. 1-4

11

3

3

3

2

DVD MT PCB

3

1

1-2: POWER PCB (Refer to Fig. 1-2)

1.2.3.

Disconnect the following connector: (CP502).Remove the 4 screws 1.Remove the Power PCB in the direction of arrow.

Fig. 1-2

1

1

Power PCB1

1

1-1:

1.2.3.4.5.6.7.8.9.10.11.

Remove the 5 screws 1.Remove the Top Cabinet in the direction of arrow (A).Remove the 2 screws 2.Remove the Leg in the direction of arrow (B).Remove the 3 screws 3.Disconnect the following connector: (CP4002).Unlock the 2 supports 4.Remove the Front Cabinet in the direction of arrow (C).Remove the 10 screws 5.Remove the 2 screws 6.Remove the Operation 1/2/3/4 PCB in the direction ofarrow (C).

TOP CABINET/FRONT CABINET/OPERATION 1/2/3/4 PCB (Refer to Fig. 1-1)

Fig. 1-1

Top Cabinet

2

2

1

(A)

1

1

1

1(B)

Operation 3 PCB

Operation 4 PCB

4

3

3

3

Front Cabinet

(B)

56

(C)

4 Operation 1 PCBOperation 2 PCB

(D)

6

55

55

55

55

5

(D)

(D)

(D)


B2-1

2. REMOVAL OF DVD DECK PARTS

2-1: TRAY (Refer to Fig. 2-1-A)

Set the Tray opened. (Refer to the DISC REMOVALMETHOD AT NO POWER SUPPLY)Unlock the 2 supports 1 and draw it while sagging theTray.

1.

2.

Fig. 2-1-A

Tray

Loader Ass'y

1

NOTE

1. In case of the Tray installation, install them as the circledsection of Fig. 2-1-B so that the each markers are met.

2-2: TRAVERSE ASS'Y (Refer to Fig. 2-2-A)

Remove the screw 1.Unlock the 2 supports 2.Remove the Insulator (R) from the Loader Sub Ass'y.Remove the Traverse Ass'y.

1.2.3.4.

Fig. 2-2-A

Tray

Loader Ass'y

Fig. 2-1-B

Insulator (R)

NOTE

1. Disassemble only the DVD DECK PARTS parts listedhere. Minute adjustments are needed if thedisassembly is done. If the repair is needed exceptlisted parts, replace the DVD MECHA ASS'Y.

NOTE

1.

2.

In case of the Traverse Ass'y, install it from (1) to (4) inorder. (Refer to Fig. 2-2-B)In case of the Traverse Ass'y installation, hook the wireon the Loader Ass'y as shown Fig. 2-2-C.

1

2

Loader Sub Ass'y

Traverse Ass'y

2

Fig. 2-2-BCheck Lock

Traverse Ass'y

Rack Loading

Loader Ass'y (Bottom Side)

Holder Traverse

Fig. 2-2-C

Loader Ass'y

Check Hook

Loading Belt

Gear Pulley

1

2-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT(Refer to Fig. 2-3-A)

1.2.3.4.5.6.

Remove the Loading Belt.Remove the screw 1.Remove the Loading Motor PCB Ass'y.Remove the 2 screws 2.Remove the Loading Motor.Remove the Gear Pulley.

Fig. 2-3-A

Loading Motor PCB Ass’y

• Screw Torque: 2.0 ± 0.3kgf•cm

• Screw Torque: 2.5 ± 0.3kgf•cm (Screw 1)• Screw Torque: 1.0 ± 0.3kgf•cm (Screw 2)

1

(1)(2)

Loader Sub Ass'y

22

Loading Motor

(3)

(3) (3)

(3)

(4)(4)

Push to Sag

Push to Sag


B2-2

BROWN (1)

WHITE (2)

NOTE

1.

2.

3.

4.

In case of the Pulley Motor installation, check if the valueof the Fig. 2-3-B is correct.When installing the wire of the Loading Motor PCB Ass'y,install it correctly as Fig. 2-3-C.Manual soldering conditions• Soldering temperature: 320 ± 20˚C• Soldering time: Within 3 seconds• Soldering combination: Sn-3.0Ag-0.5CuWhen installing the Loading Motor PCB Ass'y, install itcorrectly as Fig. 2-3-D.In case of the Loading Motor PCB Ass'y installation, hookthe wire on the Loader Sub Ass'y as shown Fig. 2-3-E.

Fig. 2-3-B

7.0 ± 0.1mm

Safety surface for pressingof the insert.

Loading Motor

Pulley Motor

Check HookLoading Motor PCB Ass’y

Loading Motor PCB Ass’y

• Install wire from (1) to (2) in order.

Fig. 2-3-C

Fig. 2-3-E

Check Hook

Fig. 2-3-D

Rack Loading

A B

The Lever should be positionbetween A and B.

Check Hook

Rack Loading

1

Loader Sub Ass’y

Gear Main

2-4: RACK LOADING/MAIN GEAR/PULLEY GEAR(Refer to Fig. 2-4-A)

1.2.3.

Unlock the support 2 and remove the Gear Pulley.Remove the Gear Main.Press down the catcher 1 and slide the Rack Loading.

Gear Pulley

2

Fig. 2-4-A

NOTE

1.

2.

In case of the Rack Loading installation, hook the RackLoading on the Loader Sub Ass'y as shown Fig. 2-4-B.When installing the Gear Main, take care the directionof up or down as shown Fig. 2-4-C.

Fig. 2-4-B

Rack Loading

Check Hook

Fig. 2-4-C

Main Gear

Up Side

Down Side

2-5: CLAMPER ASS'Y (Refer to Fig. 2-5-A)

Press the Clamper and rotate the Plate Clamper clockwise,then unlock the 3 supports 1.Remove the Plate Clamper, Magnet Clamper and Clamper.

1.

2.

Plate Clamper

Magnet Clamper

Fig. 2-5-A

Main Frame

Clamper1

11

Loader Sub Ass'y (Bottom Side)


B2-3

Holder Traverse

Insulator (F)

Traverse Ass'y

Insulator (F)

Insulator (R)

NOTE

1. In case of the Clamper Ass'y installation, installcorrectly as Fig. 2-5-B.

Fig. 2-5-B

Plate Clamper

Clamper

2-6:

Remove the Holder Traverse.Remove the 2 Insulator (F).Remove the Insulator (R).

1.2.3.

Fig. 2-6-A

HOLDER TRAVERSE/INSULATOR (F)/INSULATOR(R) (Refer to Fig. 2-6-A)

NOTE

1. In case of the Insulator (F) installation, install correctlyas Fig. 2-6-B.

Fig. 2-6-B

Traverse Holder

Insulator (F)

2-7:

Unlock the support 1.Remove the Gear Middle.Remove the screw 2.Remove the Rack Feed Ass'y.Remove the screw 3.Remove the Switch PCB Ass'y.Remove the screw 4.Remove the Gear Feed.Remove the 2 screws 5.Remove the Feed Motor.Remove the Gear Motor.

1.2.3.4.5.6.7.8.9.10.11.

SWITCH PCB ASS'Y/GEAR MIDDLE/GEAR FEED/RACKFEED ASS'Y/FEED MOTOR (Refer to Fig. 2-7-A)

3

Gear Middle

Gear Motor

Feed Motor

• Screw Torque: 1.3 ± 0.3kgf•cm (Screw 2)• Screw Torque: 3.0 ± 0.3kgf•cm (Screw 3)• Screw Torque: 1.0 ± 0.3kgf•cm (Screw 4, 5)

Switch PCB Ass'y

2

4

Rack Feed Ass'y

Gear Feed

5

Fig. 2-7-A

Traverse Ass'y51

NOTE

1.

2.

3.

4.

When installing the Rack Feed Ass'y, push both ends toalign the teeth as shown Fig. 2-7-B. Then install it.In case of the Gear Motor installation, check if the valueof the Fig. 2-7-C is correct.When installing the wire of the Switch PCB Ass'y, installit correctly as Fig. 2-7-D.Manual soldering conditions• Soldering temperature: 320 ± 20˚C• Soldering time: Within 3 seconds• Soldering combination: Sn-3.0Ag-0.5CuAfter the assembly of the Traverse Ass'y, hook the wireon the Traverse Ass'y as shown Fig. 2-7-E.

[OK] [NG]

Fig. 2-7-B

Rack Feed Ass'y

PushPush

Fig. 2-7-C

8.0 ± 0.2mm

Safety surface for pressingof the insert.

Feed Motor

Gear Motor

Check Lock


B2-4

[ 24 pin FFC ]

When installing the FFC, fold it correctly and install it asshown from Fig. 2-8.

2-8: FFC WIRE HANDLING

1.

Do not make the folding lines except the specifiedpositions for the FFC.

1.

NOTE

Fig. 2-8

Traverse Ass'y

Check Hook

Check Hook

Check Hook

Fig. 2-7-E• Loosen the wire in the direction of the arrow.

Check Hook

~ FEED MOTOR ~

WHITE (4)

BROWN (3)

~ SPINDLE MOTOR ~

YELLOW (2)

GREEN (1)

Fig. 2-7-D

Switch PCB Ass'y

• Install wire from (1) to (4) in order.

Printing Surface Fold

Reinforcement Plate

To Pick Up PCB

79 ± 1mm

B3-1


Masking Tape(Cotton Tape)

3.

REMOVAL

IC

Put Masking Tape (cotton tape) around the Flat Pack-age IC to protect other parts from any damage.(Refer to Fig. 3-1.)

1.

Fig. 3-1

NOTE

REMOVAL AND INSTALLATION OFFLAT PACKAGE IC

Some ICs on the PCB are affixed with glue, so becareful not to break or damage the foil of each ICleads or solder lands under the IC when removing it.

NOTE

Masking is carried out on all the parts located within10 mm distance from IC leads.

Blower type ICdesoldering machine

IC

Heat the IC leads using a blower type IC desolderingmachine. (Refer to Fig. 3-2.)

2.

Fig. 3-2

NOTE

Do not rotate or move the IC back and forth , until ICcan move back and forth easily after desoldering theleads completely.

When IC starts moving back and forth easily afterdesoldering completely, pickup the corner of the IC usinga tweezers and remove the IC by moving with the ICdesoldering machine. (Refer to Fig. 3-3.)

3.

Blower type ICdesolderingmachine

IC

Fig. 3-3

Tweezers

Peel off the Masking Tape.4.

Absorb the solder left on the pattern using the BraidedShield Wire. (Refer to Fig. 3-4.)

5.

NOTE

Do not move the Braided Shield Wire in the verticaldirection towards the IC pattern.

Braided Shield Wire

Soldering Iron

Fig. 3-4IC pattern

B3-2


Supply solderingfrom upper positionto lower position

IC

Supply the solder from the upper position of IC leadssliding to the lower position of the IC leads. (Refer to Fig. 3-6.)

2.

Fig. 3-6

Soldering IronSolder

IC

Absorb the solder left on the lead using the BraidedShield Wire. (Refer to Fig. 3-7.)

3.

Fig. 3-7

Soldering Iron

Braided Shield Wire

NOTE

Do not absorb the solder to excess.

IC

When bridge-soldering between terminals and/or thesoldering amount are not enough, resolder using a Thin-tip Soldering Iron. (Refer to Fig. 3-8.)

4.

Fig. 3-8

Thin-tip Soldering Iron

NOTE

When the IC leads are bent during soldering and/orrepairing, do not repair the bending of leads. If thebending of leads are repaired, the pattern may bedamaged. So, always be sure to replace the IC in thiscase.

Finally, confirm the soldering status on four sides of theIC using a magnifying glass.Confirm that no abnormality is found on the solderingposition and installation position of the parts around theIC. If some abnormality is found, correct by resoldering.

5.Solder temporarily

Soldering Iron

INSTALLATION

Take care of the polarity of new IC and then install thenew IC fitting on the printed circuit pattern. Then soldereach lead on the diagonal positions of IC temporarily.(Refer to Fig. 3-5.)

1.

Fig. 3-5

Solder temporarily

C-1

Turn on the power.Open the DVD tray.Place the Up-Date Disc and close the tray. (Refer to SERVICING FIXTURE AND TOOLS)The reading will start and the Fig. 1 screen will appear.

Press the PLAY key on the set.The data reading will start.And, "File Copying" appears on the TV monitor.After the finishing of the data reading, tray will open automatically.The display will change to “CLEAR”.Remove the Up-Date Disc.CHECK FOR THE FIRMWARE VERSIONTurn on the power, then press "CHECK SUM" key on the remote control JIG for more than 1 second.Firmware version will be displayed on the screen.When the changed version displays, the Re-write will be completed.

Turn off the power

RE-WRITE FOR DVD FIRMWARE1.2.3.

4.

5.6.

7.

Upgrade File DETECTED

Upgrade?

Press Play To Start

Fig. 1

Remote control JIG

Ref. No.

–––

JG176

Part No.

–––

APJG176112

Parts Name

Remote control JIG

Up-Date Disc

Remarks

Check for the Firmware versionUp-Date of the Firmware

Up-Date of the Firmware

JG176 Up-Date Disc

Fig. 2

Y E B 6 4 2 0 A

Fixed

Release date (Example: 2006.4.20)

Released times on the same date

A = OctoberB = NovemberC = December

AREA: WY

YEB6420A

10

02A5

1.16

1389FE

REAGION: 1

ROM NUMBER

REG CHK

SUM CHK

FL VERSION

CHIP VERSION

SERVICING FIXTURES AND TOOLS

TROUBLESHOOTING GUIDE

D-1

POWER DOES NOT TURN ON

No

Yes

NoIs there waveform atX4001 about 3.0Vp-p ?

Check X4001, IC4001 and

peripheral circuit.

Yes

Write DVD FIRMWARE DATA.

Check AT+3.3V line of POWER BLOCK.

Check Q515 and peripheral circuit.

Is the voltage at pin 8 andpin 9 of CP502 about3.3V and at pin 5 ofCP502 about 5V?


D-2

No

Yes

No

DECK DOES NOT ACCEPT

OPEN/CLOSE

Check P.CON 6V line of

POWER BLOCK.

YesIs the lose connection

at CP2302 to DECK ?Check CP2302

connection to DECK.

Change DVD LOADER.

Is the voltage at pins 3,18 and

19 of IC2301 about DC6V ?


D-3

DOES NOT LIGHT ON DISPLAY

Yes

Is the voltage at pin 13and pin 43 of IC651about 3V ?

Check AT+3.3V line of

POWER BLOCK.

No

Replace V651 or IC651.


D-4

NO PLAYBACK PICTURE OF AV

JACK

Check LOADER BLOCK.

Is there a voltage

(beam current) at

JG008 and JG009 ?

Yes

No

Is there video signal atpin 33 of IC7301 ?

Change IC7301.

No

Yes

No

Yes

Check J7302 and peripheral

circuit.

Is there a signal atpin 164 of IC4001 ?

Check IC4001 and

peripheral circuit.


D-5

NO DIGITAL AUDIO ON

PLAYBACK OF COAXIAL JACK

Is there waveform at pin 7

of J7301 about 0.3Vp-p?

Check connection at RCA

Cable.

Yes

Yes

No

No

Change IC4001.

Is there waveform atpin 159 of IC4001about 0.3Vp-p ?

Check Q8005 and

peripheral circuit.


D-6

NO ANALOG AUDIO ON

PLAYBACK

Is there AUDIO signalat pins 1 and 7 ofIC8003 ?

Yes

Is there AUDIO signal at

pins 2 and 6 of IC8003 ?Yes

Check J8003 and peripheral

circuit.

No

No

Check AT pins 184 and

186 of IC4001.

Change IC8003.

D2+1

3

D1+4

D1-6

D0+7

D0-9

CLK+10

D2-

HDMI CONNECTORCP5901

DVD LOADER/MPEG BLOCK DIAGRAM

DVDLoader(DM-4)

MPEG/MICON ICIC4001

MT1389FE/E-L

X400127MHz

A, B

IOA, V20

C

RF, A, B, C, D, E, F, MDI1

RESET ICIC4003

BD5229G-TRARESET

LD_DVD, LD_CD Q2302~2305LD DRIVE

LDO1, LDO2

MOTOR DRIVER ICIC2301

LA6565VR-TLM-E

DMSO, FMSO, TROPEN, TRCLOSE,

TRSO, FOSO, STBY, V1P4

T+/-, F+/-,LOAD+/-,

MOT_SLED+/-, MOT_SPDL+/-

OPU

SPINDLE/STEPING/

SLEDMOTOR

LIMIT, TRIN, TROUT,OPO, OP+/-

16Mbit FLASHIC4004

S29AL016D70TFI020

MA0~MA11, DQ0~DQ15,DQM0, DQM1, DBA0, DBA1, SDCLK, SDCKE, DWE#, DRAS#, DCAS#, DCS#

AUDIO AMP ICIC8003

RC4580IDR

A

D

A0~A20, AD0~AD7,PRD#, PCE#, PWR#

64Mbit SDRAMIC4005

EM638165TS-7GA

VIDEO DRIVER 6CH ICIC7301

LA73054-TLM-E

LETTER, SQUEEZE, VSEL1,I/XP, R/CR, B/CB, G/Y, C/V

3

4 C

Y

S+COAXIAL JACKJ7301

3

5 Y

U

VIDEO JACKJ7302

6

2 V

CVBS

ASPDIF

3

2 R

L

AUDIO JACKJ8003

AUDIO R

AUDIO L

AUDIO L, R

IR

IR RECEIVER (OS651)ROM-N338TAO

IR

C

7

F

A

A.......AT+3.3VB.......+1.8VC.......P.CON+5VD.......P.CON+6VE.......AT+12VF.......P.CON+12VG.......-28VH.......V+5H

SDA16

CLK-12

HOTPLUG19

POWER18

15 SCL

HDMI TRANSMITTER ICIC5901

MT1392E/C-L

A

SCL

SDA

92_Y0~Y7

92_VCK, 92_ACLK, XO

EEPROM ICIC4002

BR24L08FJ-WE2SCL

A

SDA

HDMI_SCL

HDMI_SDA

GR1 ~ GR8,P1~P16 FIP (V651)HNV-08SS44T

FP_DI, FP_DO, FP_SCK, STB

G

FIP DRIVER ICIC651

PT6315

A

H

A, B

E-1 E-2

SWITCHINGTRANST501

P.CON SW

POWER BLOCK DIAGRAM

Q505

AC IN

P.CON+5V

AT+3.3V

FL DC -

-28V

AT+12V for mute

P.CON+6V

P.CON+12V

P.ON-H

FL DC +

Q515

P.CON +5V SW

Q510

P.CON +12V SW

Q504

FL+ P.CON SW

Q502

-28V P.CON SW

VOLTAGE CTLIC501

KIA431A-AT

PHOTO COUPLERIC504

PS2561AL1-1-V (W)

POWER CTLIC502

STR-A6131M

6V REGIC503

PQ070XF01SZH

REG+1.8VIC4006

LM1117S-ADJ +1.8V

HDMI+5V REG ICIC5902

PQ1K503M2ZPHV+5H

E-3 E-4

P.CON+12V

AC120VFLDC+/-

27MHz

-28V

AT+12V for mute

AT+3.3V

P.CON+6V

P.CON+5VPOWERSUPPLY

DVD LOADER(DM4)

MOTOR DRIVERIC2301

LA6565VR-TLM-E

FIP DRIVER IC IC651

PT6315

8K EEPROMIC4002

BR24L08FJ-WE2

AUDIO AMP ICIC8003

RC4580IDR

VIDEO DRIVER 6CH ICIC7301

LA73054-TLM-E

FIPHNV-08SS44T

KEY

SERVO

RF

SERVO

IR

FP,STB

CH VIDEO DAC

ASPDIF

RESET

AUDIO_L,AUDIO_R

AMP_AUDIO_L/R

LD_DVD,LD_CD

IR 108MHzTV Encoder

MPEG-1/2/JPEGVIDEO

DECORDER

R

S_VIDEO

COAXIALRF

V

CO

L

OVERALL BLOCK DIAGRAM

IR RECEIVER (OS651)ROM-N338TAO

16Mbit FLASHIC4004

S29AL016D70TFI020

64Mbit SDRAMIC4005

EM638165TS-7G

SDA, SCL

S

RESET ICIC4003

BD5229G-TR

CVBS

U

Y

AMUTE

MPEG/MICON BLOCKIC4001

MT1389FE/E-LAUDIO CODEC/INTERNAL DAC

+1.8V

HDMI TRANSMITTER ICIC5901

MT1392E/C-L

A0~A20, AD0~AD7

MA0~MA11, DQ0~DQ15

HDMI CONNECTOR

CP5901

92_Y0~Y7, 92_VCK, 92_ACLK

TX0+/-,TX1+/-,TX2+/-, TXC+/-

E-5 E-6

1 55

109163

1

2141

61

C40

50

C40

07

C40

05

C4002C

4003

C40

06

C40

01

C40

57

C40

74

C40

73

C4066

C40

67

C40

33C

4037

C4035

C4032

C40

34

C4031

C40

29

C40

28

C40

27

C40

26C

4025

C40

24C

4022

C40

20

C40

19

C4018

C4055

C4049

C40

48

C4052

C4040

C40

16

C40

79

C4082C4081

C4083

C4011

C40

14C

4013

C40

12

R40

06

R4009R4010

R40

14

R23

43R

2341

R4004R4002

R40

73

R40

72

R4065

R4037

R4036

R4029

R40

39

R4034R

4024

R4025

R4022

R40

20

R4018

R4046R4045

R40

40

R40

75

NR

4001

NR4002

IC4004

IC4005

IC40

03

CP2303

C23

06

C23

12

C23

07

C2313R2328

R2330

R23

26

R23

27

R2310

R2311R2313R2312R

2316

R23

17R

2318

R2325

C2314

R40

07

C40

90

C40

89

R4015

C4101

C4102

R2338

R2332

R2333

R23

34C

2310

R2335

C2311C

2309

C23

08

Q2302

Q23

04

Q23

03

Q2305

R23

20

R2322

R23

23R

2321

Q2307Q2306

R23

06R

2307

Q2301

R23

09R

2308

C40

88

C2303 C2301C2302

C40

77

CP4003

IC4006

W822

C40

95

C4086

C4094

C4096

R40

13

R4011

R40

12C

4100

C40

98

C40

99

B40

01

C40

56

C40

93

B4002

C4087

C4062

C2305

C40

30

C2323

R2329R2319R2331R2342C2322

W807

R40

03

C41

03

R7318

R7317

R7316

R8040

R80

78

R80

56

R8044

R80

81

R8084R8079

R80

74

R80

69

R8061

R80

49R

8059

R80

57

R8085 R8080

R80

73

R8066

R73

23

R73

22

R8051

Q8013 Q80

10

Q8019

Q8018

C7324C80

42

C80

72

C80

78

C80

59

C8067

C80

57

C80

77

C8069

C80

56

C80

66

C80

70C

8073

J730

2

R80

60

R80

67

R80

63

R80

48

W840

B73

04

B73

05

C73

19

C73

16

C73

18

C73

25

W871 W872

C73

17

W873

R7324

Q80

14

CP

4002

CP

2302

R2337

C40

80

R8014

R73

15

C23

20

C23

21

C4112

W88

0

C41

14

IC4001

IC2301W82

1

C41

16

IC8003

R40

61C

4010

R4001

C40

46

C80

58

C7307

C7308

C7309C7310C7312

W87

7

C73

13C

7304

C73

11

IC73

01

C40

38

C40

59C

4063

J730

1

C80

38

R80

39

Q8005

R80

38

R80

37R

8036

R80

35C

8036

B80

04

C7306

C7305

R40

49R

4050

R40

52R

4051

Q4001

R40

08

R40

35

C40

78

C41

04

C5913

C5914

L5904

L5903

L5902

L5901

R59

19

C5910

C5911

C5912

CP

5901 IC

5901

C5903

R5906

C5902

B5902

R59

20

R5928

R59

16

W83

1

W83

0 C59

19

R59

18

C59

15

C59

16

C59

17

C59

18

W82

9

B40

07

C40

75

NR4003

R40

54R

4062

R40

53

C4072

C59

08

C5905

R73

02W

868

R40

74

C59

04C59

21

C5920

C59

01

R7306

C40

23

R4056

R4030

C40

71

R4055

C40

60

R4066

R40

57

C40

65C

4064

C4058

R40

21

W80

5

W832

R4058

CP2301

W85

1

W83

3

W834C

4051

C40

36

C80

74

C40

47

X40

01

C40

39

J800

3

Q7302

IC40

02

C4084R

8065

C73

03

IC5902

C59

23

C59

24

R59

21C

5922

R59

01

B40

10

C80

51C

8053

W84

2

B4011

C4105

W87

8

W886

R59

23

W88

8

W88

7

R40

76

R40

27

R5922

W83

8

W86

4

W86

5

W83

7

W82

0

W82

6

C4122

B5905

C59

25

W85

0


DVD MT (BOTTOM SIDE)DVD MT (TOP SIDE)

DM

F07

3A

DM

F07

3A

F-1 F-2

DPF010A

DPF010A

DEF085B

DEF095B

DEF086B

DEF084B

DEF085B

DEF095B

DEF086B

DEF084B

RISK

OF

FIRE

-R

EPLAC

EA

SM

AR

KED.

C502_1

FH502_1FH501_1F501

D503

D506

D502

D505B501

D509_1

L501

C511

IC502

C509

D508

R507

IC504

IC501

C517

C540R513

R514

W003

R511

D510

D512

D522

D520D516

D528

D521

R517

C519

D523

W006

R530

R534

Q504

R540

C538

L505

L503

C536

W012

W005

R529 R528

W016

D531

T501

C531

R505

R527

C535

W018W019

R502

R542

W013

D511

D513

D519

Q510 C506

D533

IC503

D515

R539C520

D525

W015

C523

D532

W814

D534R546

C518

C513

R510_1

C516

R524

D517

C522

C515_1

D535

C521

C527

D536C528

C526

W037

W804

CP502

W803

W036

W001

W024

W004

W002

W008

W007

W010

W023

W038

W011

R503

R512_1

D527

Q502

Q515

W817

CP

501

C50

8

R50

4

R51

5

C50

3

R51

8

R51

6

Q501

R52

3

Q506

R538

R50

6

Q512

Q503

Q511

Q509

R54

1

R543

R509

Q505

Q513R544

R537R536

R531

C50

7

C54

1

C50

1

R54

5R

526

R519

R54

7

R52

5

R548

SW656

SW

655

SW

654

SW657

SW653

SW

652

SW659

SW

658

SW661

SW

666CP602

V651

D667

D659

D658

D657D656

OS651

C653

D655D654

D652

W001

C674

CP

601

W003

W004

W006

W008

W009

D651

W010

SW663SW665

SW660SW662SW664

SW667D660 W808

W807

R664

CP603CP604

W804

CP605

W012

W013

W002

W809

W805R666

IC65

1

R65

1R

652

R65

3 R65

4

R65

5R

656

R65

7

R65

8R

662

C67

5

C65

8

C67

6

C65

1

C60

5

C60

4

C66

8

OPERATION/OPERATION 2/OPERATION 3/OPERATION 4 (INSERTED PARTS)SOLDER SIDE

OPERATION/OPERATION2 (CHIP MOUNTED PARTS)SOLDER SIDE


POWER (INSERTED PARTS)SOLDER SIDE

POWER (CHIP MOUNTED PARTS)SOLDER SIDE

F-3 F-4

DED021A

DED021A

DED020A

BR

WH

YE

GR

SW

2 CD

2301

M2602 M2601

15

WH

BR

CD2302M2603


LOADING MOTOR (INSERTED PARTS) SOLDER SIDE

LOADING MOTOR (CHIP MOUNTED PARTS) SOLDER SIDE

SW SOLDER SIDE

F-5 F-6

SW1

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

C403

7

11P

CH

C4003 0.1 B

C4007 0.1 B

C410

1

470P

CH

C409

0

0.1

B

C408

9

0.01

5B

C410

3

0.00

22B

C4082 100P CHC4081 33P CH

C4083 33P CHC4084 100P CH

C4075100P CH

C4073 0.1 B

C4074 0.1 B

C403

60.

1B

C4066

1 B

C4005

0.1 B

C401

0

220P

CH

C403

2

0.47

B

C404

60.

0068

B

C401

6

0.1

B

C402

40.

1B

C402

20.

033

B

C402

60.

1B

C402

80.

1B

C402

90.

047

BC4

031

0.04

7B

C403

40.

1B

C401

90.

1B

C402

00.

1B

C401

80.

1B

C402

50.

001

BC4

027

22P

CH

C40010.1 B

C4011 1 BC4012 1 BC4013 1 BC4014 1 B

C4006 0.1 B

C4002 0.1 B

C410

2

470P

CH

C411

4

1B

C4088 1 B

C402

30.

1B

C405

70.

1B

C406

0

0.1

B

C406

50.

1B

C406

40.

1B

C405

90.

0015

B

C405

8

0.1

B

C403

81

B

C4077

0.0082 B

C403

3

9PCH

C4035390P CH

C40670.1 B

C4072

100P CH

C406

3

0.1

B

C407

9

0.1

B

C407

1 0.1

B

C403

0 1025

VKA C4

047 1000

6.3V

YK

C408

0

220

6.3V

YK

C403

910

25V

KA

R403

0

33

R4057 10K

R400

3

680K

R4009 12KR4010 12K

R4007 15KR4006 10K

R401

510K

R401

410K

R4074

33

R405

0

150

+-1%

R405

1

150

+-1%

R4062 10R4054 22R4053 22

R402

9

33

R4039 10K

R4037 10K

R4036 10K

R4034 10K

R405

2

150

+-1%

R4046

2.7K+-1%

R4045 15K

R405

5

22

R402

768

R401

815

K

R400

2

10K

R400

4

10K

R402

0

100K

R4066 33

R4065 33

R4075

1K

R4024

100KR4022

750K

R405

6

22

R406

1

10K

R4001 33

R4072 33R4073 33

R402

568 R4

049

150

+-1%

R4076

100

TP4060TP4061

TP4066TP4067

TP4065TP4064TP4063TP4062

TP4095

TP4008TP4009

TP4001

TP4002TP4003TP4004TP4005TP4006

TP40

12

TP4010TP4011

TP4092

TP4093

TP4091

TP4094

TP4088

TP4089

TP4082

TP4081

TP4083

TP4084

TP4085

TP4086

TP4087

TP40

13

TP40

14

TP40

15TP

4016

TP40

17TP

4018

TP40

19TP

4020

TP40

23

TP40

24TP

4025

TP40

26TP

4027

TP4059TP4058

TP4056TP4057

TP4055

TP4035

TP40

43

TP40

42

TP40

33

TP4007

TP4036

TP4037

TP40

77TP

4078

TP40

30TP

4029

TP40

21TP

4022

IC40

02BR

24L0

8FJ-

WE2

EEPR

OM IC

1234

5 6 7 8

IC40

03BD

5229

G-TR

RESE

T IC

1 2 3

45

CP400200_6232_011_006_800+

1

10

11

2

3

4

5

6

7

8

9

X4001100GT02720

27MHz

W83

4

W80

5

W83

2

W84

2

W83

3

IC4001MT1389FE/E-L

MPEG/MICON IC

101102103104105106107108

1091

1011

1112

1131

1411

5116

1171

1811

9120

1211

2212

3124

1251

2612

7128

1291

3013

1132

1331

3413

5136

1371

3813

9140

1411

4214

3144

1451

4614

7148

1491

5015

1152

1531

5415

5156

1571

5815

9160

1611

62

163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216

110

100

1112

1314

1516

1718

192

2021

2223

2425

2627

2829

330

3132

3334

3536

3738

394

4041

4243

4445

4647

4849

550

5152

5354

55 56 57 58 59

6

60 61 62 63 64 65 66 67 68 69

7

70 71 72 73 74 75 76 77 78 79

8

80 81 82 83 84 85 86 87 88 89

9

90 91 92 93 94 95 96 97 98 99

OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICENOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME

DURING PLAYBACK.MEASURED WITH THE DIGITAL TESTER

NOTE:THE DC VOLTAGE EACH PART WAS

B4007

MMZ1608R102CT

B401

1

MM

Z160

8R1

02CT

B4010MMZ1608R102CT

NR40

014D

03W

GJ03

30T5

E

NR40034D03WGJ0220T5E

NR40024D03WGJ0330T5E

XO I/XP

V+3

V+3A

AMUT

E

LETT

ER

SQUE

EZE

V1P4 AL

V+1R

8

AR

R/CRV+3EB/CBV+3G/Y

MDI1 V+1R8C/VV20 PWDN#

STBY V+3V -28VA FLDC-B FLDC+C ADAC_GNDD

D_GNDEF V+3

LDO1LDO2DMSOFMSO

TRCLOSE R/CRPWDN#TROPEN B/CB

TRSO G/YFOSO C/VASPDIFOPO SQUEEZEOP+ LETTERDOP- I/XPAIOA VSEL192_Y6

TRIN B92_Y5

TROUT C 92_Y4LIMIT RF 92_Y2V1P4

RF XOURST#92_Y192_Y792_Y0 92_Y692_Y592_ACLK92_Y492_Y3TROUT92_Y292_Y192_Y0TRIN92_VCKA0 VSEL192_ACLKA192_ABCKA2 E MA4 92_ALRCKA392_SDATA0A4 F MA5SCLA5 MDI1 MA6SDAA6 V20 MA7HDMI_SCLA7 LDO2 MA8 HDMI_SDAA8

A9 LDO1 MA9

A10 MA11A11 SDCKEA12A13A14 SDCLK

ALA15 MA3 ARA16 AMUTEMA2A17 ASPDIFMA1A18 GNDA19 MA0A20 MA10AD0AD1 OPOAD2 DBA1

AD3 OP- DBA0

AD4 OP+AD5 DCS#DMSO DRAS#AD6 FMSO DCAS#AD7 TROPEN DWE#

PWR#PRD# DQM1

PCE# TRSO DQ8 FLDC-DQM0 FOSO DQ9DQM1 -28VLIMITDWE# FLDC+

DCAS# IOA DQ10

DRAS# TRCLOSE DQ11 D_GNDDCS# STBY DQ12DQ0 A2 DQ13DQ1 V+3EDQ2 DQ14

IRDQ3 A3 DQ15DQ4 FP_DOA4 DQ0DQ5 A5 DQ1 STBDQ6DQ7 A6 DQ2 FP_DIDQ8 A7 DQ3 FP_SCKDQ9 A8 DQ4

DQ10DQ11DQ12DQ13DQ14DQ15 SCLDBA0DBA1 SDA

MA0MA1MA2MA3MA4MA5MA6MA7 RXDMA8 TXDMA9

MA10

PWR#

PCE#

PRD#

MA11 A18

A19

A16

A15

A14

A13

A12

A11

A10

A9 A20

A1 AD0

AD1

AD2

AD3

AD4

AD5

AD6

AD7

A17

A0 DQM

0

RXD

TXD

DQ7

DQ6

DQ5

SDCKESDCLK

SDA

SCL

HDM

I_SC

LHD

MI_

SDA

92_Y

7

92_V

CK

FP_D

I

FP_S

CK

FP_D

O

92_Y

3

STB

V+3

IR

FROM/TO LOADER/MOTOR DRIVE

G-2G-1

(DVD MT PCB)

DMF073

(CP601)

FROM/TO DISPLAY

DGND

DGND

FLDC+

-28V

FLDC-

V+3E

IR

STB

DO (F to M)

DI (M to F)

CLK

TO AUDIO JACK

TO VIDEO JACK

FROM/TO HDMI

FROM/TO POWER PORT

FROM/TO MEMORY

PCB130

NCNCNC

NC NC NC

NC

3

NCNCNCNCNCNC

NC

1.8V

VCC

SDA

NC NC NC

SCL

WP

GND

0.0

0.0

0.0

0.0

3.3

3.3

0.0

3.3

1.51.51.51.51.7

2.12.12.12.1

2.12.10.20.22.53.33.53.42.10.02.82.01.41.31.31.32.51.61.42.11.30.01.41.41.42.53.40.03.32.21.81.82.21.62.71.92.2

0.2

1.91.91.91.91.91.90.01.91.91.91.90.01.91.9

3.3

0.0

0.0

1.8

0.7

0.9

1.0

1.3

0.0

0.1

3.3

1.8

1.6

1.6

1.6

3.3

0.0

1.7

3.3

1.4

1.5

2.0

0.0

1.7

1.7

1.4

0.9

3.3

1

FE

TE

0.0

1.93.33.01.52.01.61.6

1.8

0.11.1

3.3

108

AVDD3216

215

DVDADVDBDVDC

DVDRF IPDVDRF INMAMBMC

SASBSC

MD

DVDD

SD

SVDD3

RFLV/RFONSGNDV2REFDV2DVREFD

TPI

DVDD18

55

56

57

58

107

DVDD3

IREF

OP_OUTOP_INNOP_INP

AGND

RFGN

D18

RFVD

D18

XTAL

I

PLLV

SS

XTAL

O

JITF

OJI

TFN

IDAC

EXLP

PLLV

DD3

LPFO

NLP

FIP

LPFI

NLP

FOP

ADCV

DD3

CRTP

LPRF

GND

RFGC

ADCV

SSRF

VDD3

RFRP

DCRF

RPAC

DVDD

18

DVDD

3

TNI

CDFONCDFOP

MDI1MDI2LDO2LDO1

CSO/RFOP

FEOTEOTEZISLV

DMOFMOTROPENPWMPWMOUT1/ADIN0TROFOO

IOA2 (PU)

IOA3 (PU)IOA4 (PU)IOA5 (PU)IOA6 (PU)IOA7 (PU)HIGHA0(PU)

A16 (PU)

HIGH

A7 (P

U)DV

DD3

HIGH

A6 (P

U)HI

GHA5

(PU)

HIGH

A4 (P

U)HI

GHA3

(PU)

HIGH

A2 (P

U)HI

GHA1

(PU)

IOCS

# (P

U)IO

A1 (P

U)IO

OE#

AD0

AD1

AD2

AD3

AD4

AD5

AD6

ALE

(PU)

AD7

IOA0

(PU)

UWR#

(PU)

URD#

(PU)

UP1_

2 (P

U)UP

1_3

(PU)

UP1_

4 (P

U)UP

1_5

(PU)

ICE

(PD)

PRST

# (P

U)IR DQ

M0#

RD7

RD6

RD5

INT0

# (P

U)

A17

(PU)

IOA18 (PD)

IOA19 (PD)

IOWR# (PU)

RD4RD3RD2RD1RD0

RD15RD14RD13RD12RD11RD10

RD9RD8

DQM1RWE#CAS#RAS#RCS#

BA0BA1

DVDD18

RA10RA0

RA1RA2RA3

RCLK

1.22.01.51.7

DVDD3CKE

RA9RA8

1.91.21.21.2

RA7RA6RA5RA4

1.21.21.21.2

DVDD18 1.8

DVSS(1.8)

DVSS

(1.8

)

1.9

(PD) RA11

1.61.61.6

1.6

2

3.30.0

161

160

159 SPDIF

DACVDDC(V)

VREF(V)

FS(V)

0.0

0.0

1.31.3

DACV

DDB(

V)DA

CVSS

B(V)

DACV

DDA(

V)3.

3

DACV

SSA(

V)

R/CR

(V)

B/CB

(V)

0.7

0.0

0.7

0.7

0.7

AADV

SS(A

)AK

IN2(

A)AD

VCM

(A)

AKIN

1(A)

AADV

DD(A

)

DACV

SSC(

V)CV

BS/C

(V)

G/Y(

V)

APLL

VDD(

A)AP

LLCA

P(A)

APLL

VSS(

A)AD

ACVS

S1(A

)AD

ACVS

S2(A

)

AVCM

(A)

AL/S

DATA

2(A)

ADAC

VDD1

(A)

ADAC

VDD2

(A)

3.3

3.3

HRFZ

C

OSP

OSN

NC

3.3

3.3

0.0

1.9

V_OU

T

VSS

NCCT

VDD

1.8V

162

(A21

)

ARF(

SW)/G

PIO(

A)AR

S/GP

IO(A

)AR

/SDA

TA1(

A)

ALS/

SDAT

A0/G

PIO(

A)AL

F(CT

R)/G

PIO(

A)

MPEG/MICON/DSP SCHEMATIC DIAGRAM

RFLV

SQLE

GPIO2/SPMCLK

GPIO0/VSYN/YUV1GPIO1/HSYN/INT4#/YUV2

GPIO

6/YU

VCLK

(PD)

GPIO

7/YU

V3 (P

D)

DVSS(3.3)

GPIO3/INT1#/SPDATAGPIO4/SPLRCK

IOA2

1/YU

V7/G

PIO

(PD)

IOA2

0/YU

V0 (P

D)

UP1_

6/SC

L (P

U)UP

1_7/

SDA

(PU)

UP3_

0/RX

D (P

U)UP

3_1/

TXD

(PU)

UP3_

5/TX

D/SD

A (P

U)UP

3_4/

RXD/

SCL

(PU)

CS

6

MC_DATA/INT2#/YUV0/GPIO(PD) ASDATA3/YUV6/GPIO(PD) ASDATA2/YUV5/GPO(PD) ASDATA1/YUV4/GPO(PD) ASDATA0/YUV2/GPO(PD) ALRCLK/YUV1/GPO

ACLK/YUV0/GPIOABCK/YUV0/GPIO

GPIO5/INT3#/SPBCK

ANALOG VIDEO OUTPUT!! NECESSARY SHIELD

FG/ADIN1/GPIO (PU)

RESET

V+3D

(V+3D)

0.0

V+3RF

ADIN

0.1

0.00

3.3 0

0.5

3.3

0.9

2.8

2.7

2.7

1.8

0.5

1.8

0.0

3.3

0.0

1.5

1.0

1.5

1.6

1.6

2.0

3.2

2.9

0.0

3.1

3.0

3.3

1.2

1.1 0

1.0

1.7 0

1.8

2.6

3.1

3.3

2.6

3.3

3.3

0.1

3.3

1.9

1.9

1.9

1.9

2.6

0.0

3.3

2.6

0.00.00.0

3.31.63.3

0.0

0.1

1.4

0.1

3.3

3.3

1.0

0.0

0.0

0.0

0.0

3.3

3.3

1.6

1.0

1.6

3.3

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

IC4004 S29AL016D70TFI02016Mbit FLASH

110

1112

1314

1516

1718

192

2021

2223

242526

2728

29

3

3031

3233

3435

3637

3839

4

4041

4243

4445

4647

48

56

78

9

IC4005 EM638165TS-7G64Mbit(4M*16) 143MHz SDRAM

110

1112

1314

1516

1718

192

2021

2223

2425

262728

29

3

3031

3233

3435

3637

3839

4

4041

4243

4445

4647

4849

55051

5253

54

67

89

C405

1

0.1

B

C4062

0.001 B

C4040

1 B

C4055

0.1 B

C4052

0.1 B

C4049

0.1 B

C4048

0.1 B

C405

0 1000

6.3V

YK

R4040

10K

TP4028




DQ15 DQ0A17 A16

A15DQ0DQ1 DQ14 DQ1DQ2 A14DQ3DQ4 DQ13 DQ2DQ5 A0 A13DQ6DQ7DQ8 AD7 A12DQ9

DQ10 DQ12 DQ3DQ11 A11DQ12DQ13 DQ11 DQ4DQ14 AD6 A10DQ15MA0MA1 A9MA2MA3 DQ10 DQ5MA4 AD5 A20MA5MA6 DQ9 DQ6MA7MA8MA9

MA10 AD4 PWR#MA11DWE# DQ8 DQ7

SDCKEDQM1DQM0

DCAS#DRAS#DBA1 DQM0DBA0 AD3

SDCLKDCS# DQM1 DWE#

A0A1 SDCLK DCAS#A2 AD2 A19A3A4 SDCKE DRAS#A5 A18A6A7 DCS#A8 AD1 A8A9

A10 MA11 DBA0A11 A7A12A13 MA9 DBA1A14 AD0 A6A15A16 MA8 MA10A17 PRD# A5A18A19 MA7 MA0A20 A4AD0AD1 MA6 MA1AD2 PCE# A3AD3AD4 MA5 MA2AD5 A1 A2AD6AD7 MA4 MA3

PRD#PCE#PWR#

V+3D_GND

G-4G-3

(DVD MT PCB)

DMF073

MEMORY SCHEMATIC DIAGRAM

FROM POWER PORT

PCB130

NC

0

0

1.4

2.6

2.6

1.4

1.2

1.6

1.6

3.3

1.3

0.9

1.6

2.5

1.5

1.6

1.3

2.5

1.5

0.8

1.0

1.7

1.6

0.8

0

0.7

0.6

1.2

1.3

1.9

0.7

1.2A16

VSS

VSS

CE#

A0

A15

A14

A13

A12

A11

A9

A8

A10

A19

D7

D14

D6

D13

D5

D12

D4

VCC

D11

D3

D10

D2

D9

D1

D8

D0

NC

NC

NC

NC

NC

NC

NC

OE#

RESET#

RY/BY#

0NC (BYTE#)

D15/A1

NC (WP#/ACC)

0

0.1

0

0

3.3

A7

A6

A5

A4

A3

A2

A1

A18

A17

0.1

1.6

0.7

1.4

1.6

1.3

1.6

1.7

2.5

1.6

NC

NC

NC

WE#

NC

VSS

DQ0

DQ1

DQ2

DQ15

VSSQ

DQ12

DQ11

VSSQ

DQ3

DQ4

VDDQ

DQ5

DQ6

VSSQ

DQ7

VSSQ

DQ10

DQ9

VDDQ

DQ8

VCC

LDQM

VSS

UDQM

CLK

CKE

NC

A9

A11

A10/AP

A0

A2

A1

A3

VDDVSS

A4

A5

A6

A7

A8

NC/RFU

VCCQ

NC

NC

VCC 3.3

1.5

3.3

1.5

1.5

0.0

1.5

1.5

3.3

1.5

1.5

0.0

1.5

3.3

2.0

3.3

3.3

3.3

3.3

3.3

1.0

0.0

1.7

1.7

1.7

1.7

3.30.0

1.7

1.7

1.7

1.7

1.7

1.7

1.7

1.9

1.7

1.9

0.0

1.5

3.3

1.5

1.5

0.0

1.5

1.5

3.3

1.5

1.5

0.0

1.5

0.0

DQ13

VDDQ

DQ14

WE#

CAS#

RAS#

CS#

BA0/A13

BA1/A12

FROM/TO MPEG/MICON/DSP

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

CP2301LD07T2-24ND-03

PICK-UP(GOLD)

1

10

11

12

13

14

15

16

17

18

19

2

20

21

22

23

24

3

4

5

6

7

8

9

CP230200_6232_005_006_800+

LOADING

1

2

3

4

5

Q2301KTC3875S_Y_RTK

VCR_CTL

Q2304KTA1504S_Y_RTK

LD DRIV for CD

Q2305KTA1504S_Y_RTK

LD DRIV for DVD

Q2302KTA1504S_Y_RTK

LD DRIV for CD

Q2303KTA1504S_Y_RTK

LD DRIV for DVD

CP230300_6232_006_006_800+

SLED/SPINDLE

1

2

3

4

5

6

S

DG

Q23062SK3018T106

VCR_CTL

S

DG

Q23072SK3018T106

VCR_CTL

:SINCE THESE PARTS MARKED BYCAUTIONDESCRIBED IN PARTS LIST ONLYCRITICAL FOR SAFETY,USE ONES

ARE

DANS LA NOMENCLATURE DES PIECESN’UTILISER QUE CELLS DECRITESDANGEREUSES AN POINT DE VUE SECURITE

:LES PIECES REPAREES PAR UN ETANTATTENTION

IC23

01LA

6565

VR-T

LM-E

MOT

OR D

RIVE

R IC

1 10 11 12 13 14 15 16 17 18 192 20 21 22

23242526272829

3

30313233343536373839

4

4041424344

5 6 7 8 9

C230

7

1B

C2302

0.1 B

C2303

0.1 B

C2301

0.1 B

C2323

0.1 B

C232

2

0.00

22B

C230

5

0.1

B

C231

1

0.01

B

C231

0

0.01

B C230

9

0.1

B

C231

3

0.01

B

C230

8

0.1

B

C231

2

1B

C231

4

1B

C230

6

100

10V

YKC2

320

100

10V

YK

C232

1

100

10V

YK

R2325

15K +-1%

R234

1

10K

R234

3

10K

R232

8

10K

+-1%

R230

8

10K

R2307

100K

R2309

10K

R2306

100K

R232

2

4.7

R232

0

4.7

R232

3

4.7

R232

1

4.7

R233

8

10K

R231

9

150K

R2329

1

R234

2

680K

R233

1

150K

R232

7

4.7K

R2310

2.7K R2337

5.6K

R231

1

10K

R231

2

10K

+-1%

R231

3

10K

+-1%

R232

6

4.7K

R231

8

10K

+-1%

R231

6

10K

+-1%

R231

7

10K

+-1%

R233

5

2.2

R233

4

2.2

R233

2

1.2

R233

3

1.2

R2330

10K +-1%

TP2333

TP2334

TP2304

TP2305

TP2306

TP2309

TP2310

TP2311

TP2312

TP2313

TP2314

TP2315

TP2316

TP2317

TP2318

TP2319

TP2308

TP2307

TP2320

TP2321

TP2322

TP2323

TP2332

TP2341

TP2302

JG002

JG003

JG004

JG005

JG006

JG007

JG010

JG008

TP2324

TP2325

TP2326

TP2327

TP2328

TP2303

TP2342JG009

JG001

TP2339

TP23

29

TP23

30

TP2338

TP2337

TP2336

W807

W864

W865




IOA

V+5S

V20V+5S

ABCF

DV20E

V+3F FEMDI1

D LDO2LDO1C

IOAIOAV1P4LDO1RFLIMITBTROUT

A TRINSTBYDMSOMDI1FMSOTRCLOSETROPENTRSOFOSOOPOLDO2

OP+OP-RF

T+

T-

F+

F-

V+3FV+5S

TRSO

FOSO

V+6AD_GND

M_GND

LOAD-

LOAD+STBY

TROUTV+6A DMSO

TRIN

V+3F V1P4

OPO

OP-

OP+

LIMIT

MOT_SLED-

MOT_SLED+

MOT_SPDL+MOT_SPDL-

V+3F

FMSO

TRCL

OSE

TROP

EN

LOAD

-

LOAD

+

MOT

_SPD

L-

MOT

_SPD

L+

MOT

_SLE

D-

MOT

_SLE

D+

T- T+ F- F+

LOADER/MOTOR DRIVE SCHEMATIC DIAGRAM

FROM/TO LOADERFROM/TO MPEG/MICON/DSP

G-6G-5

(DVD MT PCB)

DMF073

FROM POWER PORT

PCB130

LOAD+

LOAD-

GND

OPEN

CLOSE

NC

3.3

0

3.3

0

3.33.3

3.12.5 2.5

3.1

2.0 2.0

0.0

4.9

0.0

0.00.2

5.0

0.0

0.00.0

CD

DVD

RF33

SW(GND)

LIMIT SW

SLD-

SLD+

SPD-

SPD+

VRCOM

TRKG DRV

TRKG RTN

FOCS RTN

FOCS DRV

VCC

D

B

VR780(CD)

VRF(RF_OUT)

SW1(DVD/CD)

C

E

VS

F

GND

A

VR650(DVD)

GND

GND

LD_DVD(650)

LD_CD(780)

PD/GND

NC

FWD

REV

VCC2

VLD-

VLD+

VD4+

VD4-

VD3+

VD3-

VD2+

VD2-

VD1-

VD1+

VCC1

VCCS

VIN1

+A

VIN1

-A

VIN

1

VIN3

VIN3

-

VIN2

VIN2

-

VIN2

+

REG-

OUT

VREF

-OUT

VREF

-INVIN4

VIN4

-

MUT

E234

MUT

E1

VCON

T

NCPGND

1

PGND

2

S-GN

D

0.0 4.0 3.3 3.3

TRAC

K

1.4 1.4

VC2

1.4 NC NC

NC NC

REG-

IN

0.0 NC

VO_O

P

VIN-

OP

VIN+

OPNC NC

NCNC

1.41.41.1

FOCU

S

1.41.4

0.0 5.9 0.10.0 0.8 2.6 2.5 2.5 2.6 0.0 0.0 2.72.5 5.9 5.9 1.4 1.4 1.43.91.4

NC

NC

SPINDLE

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

Q8013KRC407-RTK/P

XAMUTE(L:ON)

Q8010KRC407-RTK/P

ZERO MUTE(H:ON)

H1H2

E

J8003RCA-207B-02

AUDIO OUT

1

23

CAUTION: DIGITAL TRANSISTOR

C8053

4716V NAC8051

4716V NA

Q8018KTC2875-B

MUTE SW

Q8019KTC2875-B

MUTE SW

Q8005KTC3875S_Y_RTK

COAXIAL DRIV

Q8014KTA1504S_Y_RTK

JACK MUTE(H:ON)


C8072

0.1 B

C805

8

0.1

B

C805

9

0.1

B

C805

7

560P

CH

C805

6

560P

CH

C8069

68P CH

C8067

68P CH

C804

2

100P

CH

C8036

1 B

C8074

330P CH

C807

8

330P

CH

C807

7

330P

CH

C8070

4716V YK

C8038

150V KA

C8073

4716V YK

C806

6

100

10V

YK

R801

4

4.7K

R806

9

22K

R806

5

4.7K

R8084

220 +-1%

R8085

220 +-1%

R8060

470K

R8048

470K

R8057

22K

R8066

10K

R8059

10K +-1%R8049

10K +-1%

R8061

10K

R8063

27K +-1%

R803

8

220

R8035

2.2K

R804

0

100K

R8039

75R803

6

3.9K

R803

7

1.8K

R807

4

22K

R807

3

22K R8081

470

R8080

220 +-1%

R8067

27K +-1%

R805

1

4.7K

R8078

470

R8079

220 +-1%

R8044

8.2K

R805

6

4.7K

IC80

03RC

4580

IDR

AUDI

O AM

P IC

1234

5 6 7 8

W880

W840




B800

4

MM

Z160

8R10

2CT

V+5

ASPD

IF

AMUT

E

PWDN

#

V+12

AT

COAX

IAL

D_GND

V+12AT

V+12

V+5

COAXIAL

AMUTEASPDIF

ALAR

GND

AL

AR

GND

V+12

G-8G-7

(DVD MT PCB)

DMF073

FROM MPEG/MICON/DSP

TO VIDEO JACK

FROM POWER PORT

AUDIO JACK SCHEMATIC DIAGRAM

PCB130

+-

-+

+VS

-VS

6.3 6.3 6.3

6.3 6.3 6.30

12.5

2.8

2.1

5.0

-1.2

0

0

0

0.12.7

-1.20

0

9

10

L R

0.1

0

2.7

0

0.30.1

11

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

H1H2

E

H1H2

E

J7302RCA-405A-08

CVBS/Y/U/V

1

23

4

56

IC7301 LA73054

VIDEO DRIVER 6CH IC

110

1112

1314

1516

1718 19

2

2021

2223

2425

2627

2829

3

3031

3233

3435

36

45

67

89

E E

H

J7301R102-D04KA(III)-06

S+COAXIAL12

34

5

7

8

Q7302KRC407-RTK/P

P-H/I-L

CAUTION: DIGITAL TRANSISTOR CAUTION: DIGITAL TRANSISTOR

C7309

1 BC7310

1 B

C732

4

0.1

B

C7313

0.1 B

C7304

0.1 B

C7312

0.1 B

C7308

1 B

C7307

1 B

C7305

0.1 B

C7306

1 B

C730

3

470

6.3V

YK

C731

6 470

6.3V

YKC7

317 47

06.

3VYK

C731

9 1000

6.3V

YK

C731

8 1000

6.3V

YK

C732

5

470

6.3V

YK

C731110010V YK

R730

6

1K

R731

5

75+-

1%R7

316

75+-

1%R7

317

75+-

1%R7

318

75+-

1%

R732

2

75+-

1%

R732

3

75+-

1%

R732

4

10K

R7302

1K

TP7304

TP7303

TP7301

TP7302

W878

W87

2

W87

1

W888

W86

8

W87

3

W877W

886

W887




B730

4

MM

Z160

8R10

2CT

B730

5

MM

Z160

8R10

2CT

C/V

SQUEEZE

LETTER

LETTERSQUEEZE

VSEL1I/XPR/CRB/CBG/YC/V

YCMIX

VSEL1

G/Y

B/CB

R/CR

ASP

S_C_OUT

S_Y_OUT

COAXIAL CVBS_OUTI/XP

P-H/I-LV+5V

V+6AV+3FV+5

D_GND

Y_OU

T

U_OU

T

V_OU

T

YCM

IX

D_GND

COAX

IAL

G-10G-9

2.0

(DVD MT PCB)

DMF073

FROM POWER PORT

FROM AUDIO JACK

FROM MPEG/MICON/DSP

VIDEO JACK SCHEMATIC DIAGRAM

PCB130

14

YU V CVBS YC

1213

15

1617

VCC1

CVBS in

MUTE1

SQ

LE

C in

GND11

Y1 in

YC-MIX

Y2 in

MUTE2

CB in

AMP2

CR in

GND12

REG

GND26

CR out

GND25

CB out

VCC22

Y2 out

GND24

GND23

Y1 out

GND22

C-DC out

C out

GND21

CVBS out

VCC21

DRIVE1

AMP1

IN SW

LPF

(9dB=H,6dB=L)

(MIX=H,OFF=L)

(RGB=H,YUV=L)

(P=H,I=L)

(9dB=H,6dB=L)

(ON=H,OFF=L)

(ON=H,OFF=L)

DRIVE2(1D=H,2D=L)

(1D=H,2D=L)

+5V

GND

ASP

0

2.8

0

2.9

4.1

2.9

0

0

0

0

2.8

0

0

2.8

0

0

5.0

0

0

0

0

0

0

0

0

0

0

2.6

2.5

2.6

2.7

5.0

2.5

2.5

0

0

03.3

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST

NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED

C590

8

100

10V

YK

IC5901MT1392E/C-L

HDMI TRANSMITTER IC

110

1112

1314

1516

1718

192

20

21 22 23 24 25 26 27 28 29

3

30 31 32 33 34 35 36 37 38 39

4

40

4142

4344

4546

4748

49

5

5051

5253

5455

5657

5859

6

60

616263646566676869

7

70717273747576777879

8

80

9

CP59011903015-3

1

10

11

12

13

14

15

16

17

18

19

2

3

4

5

6

7

8

9

L5901ACM2012H-900-2P

1

2 3

4

L5902ACM2012H-900-2P

1

2 3

4

L5903ACM2012H-900-2P

1

2 3

4

L5904ACM2012H-900-2P

1

2 3

4

C5925

0.1 B

C592

0

0.1

B

C590

5

0.00

1B

C590

4

0.1

B

C5912 0.1 B

C5911 0.1 B

C59130.1 B

C591

80.

1B

C5914 0.1 B

C5901

0.1 B

C5910

0.0056 B

C5903

0.1 B

C591

6

0.1

B

C591

50.1

B

C591

70.

1B

C5902

0.1 B

C591

9

476.

3VKA

C592

1

1025

VKA

R592

310

0

R592

2

1K

R592

0

1.5K

R591

9

1.5K

R591

6

510

+-1%

R5928

10

R5906

820

R591

856

0+-

1%

TP59

16

TP59

17

TP59

15

TP59

27

TP59

26

TP59

25

TP5903

TP59

01

TP59

02

TP5931

W850

W851

W82

9

W83

0

W83

1


B5905

MMZ1608R102CT

B5902

MMZ1608R102CT

ASPD

IF

92_A

CLK

D_GND A_GND

V+3HDVDD18

92DA

C_AV

DD3

V+5H

92_A

BCK

92_S

DATA

1

92_S

DATA

2

92_S

DATA

3

92_VCK

92_A

LRCK

92_S

DATA

0

92_A

VDD3

92PL

L_AV

DD3

92_Y092_Y192_Y292_Y392_Y492_Y592_Y6 DVDD18

FS_1

392

VREF

_139

2

92_Y7SCLSDA

URST#PWDN#

ASPDIF92_ACLK

HDMI_SCLHDMI_SDA TX2+

XO

TX2-

TX1+TX2+

TX1-

TX2-

TX0+

TX1+TX0-

92_VCK TX1-

TXC+

92_Y0 TXC-TX0+

92_Y1

TX0-92_Y2

92_Y3

92_Y4 TXC+

92_Y5 TXC-

92_Y6 PLLC0

92_Y7 HDMI_SCL

HDMI_SDA

SCL HPD

SDA V+5H

PWDN

#

URST

#

XO

G-12G-11

NCNCNC

NC

NC NC NC NC NC NC

(DVD MT PCB)

DMF073

HDMI SCHEMATIC DIAGRAM

PCB130

NCNC

NC

NC

NC

NC

NC

NC

NCNCNC

NC

NC

DVDD33

VCK

DVSS

SSD

DVD1

8

CLK

INT

DVSS

MSC

K/GP

O5

GPO8

GPO9

GPO1

0

AVDD

VREFFS

AVSS

AVDD

AVSS

AVDDG

AVSSBR

SPDI

F

AD3

AD1

AD2

AD0

ACK

ABCK

ALRC

K

DVDD

18SS

CK

AVSS

AVSS

TCK-

TCK+

AVDD

TX0-

TX0+

AVSS

TX1-

TX1+

AVDD

TX2-

TX2+C1 (PD)DVSS

2

1

C0 (PD)

19

20

C2 (PD)

C3 (PD)

C4 (PD)

C5 (PD)

C6 (PD)

C7 (PD)

Y0 (PD)

Y1 (PD)

Y2 (PD)

Y3 (PD)

Y4 (PD)

Y5 (PD)

Y6 (PD)

Y7 (PD)

/RST

(PD)

A7/G

PO0

(PD)

A6/G

PO1

(PD)

TRAP

2/GP

O2 (P

D)

TRAP

1/GP

O3 (P

D)

TRAP

0/GP

O4 (P

D)

GPO7

(PD)

HTPL

G (P

D)

NO MOUNT(READY)

42

41

SWING

AVSS59

60

AVDD

AVDD

PLLC1

PLLC0

AVSS

/PW

DN (P

U)


MSD

/GPO

6 (P

U)

D2+

D2-S

D2-

D1+

D1-S

D0+

D0-S

D0-

CLK-S

CLK-

CEC

SCL

SDA

GND

POWER

HOTPLUG

NC

D1-

CLK+

TX2+

TX2+

TX1+

TX1-

TX0+

TX0-

TXC-

TXC+

(92_DV33)

VCK

0.0

2.6

0.0

0.0

0.0

0.0

0.0

0.0

0.0

3.4

1.5

0.0

1.0

1.0

1.0

1.0

1.5

1.7

1.0

1.1

1.8

3.3

3.3 1.1

0.0

0.0

0.0

0.0

0.0

0.0

0.00.0

2.7

0.0

0.0

0.0

0.0

5.0

0.0

0.0

1.3

3.3

3.3

0.0

0.0

3.3

0.0

3.3

0.0

2.9

3.3

0.0

0.0

0.0

3.3

0.0

3.3

1.1

0.0

1.1

1.1

1.7

2.6

2.6

2.6

2.61.6

0.0

0.0

1.8

0.3

0.33.

2

03

3.2

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

CP4003A2001WV2-14P

1

10

11

12

13

14

2

3

4

5

6

7

8

9

IC4006

LM1117S-ADJ

REG+1.8V IC

123

IC5902 PQ1K503M2ZPHHDMI+5V REG(300mA) IC

12

3 45

6

C409

5 476.

3VKA

Q4001KTC3875S_Y_RTK

ADACVDD REG


ARE



C409

4

0.1

B

C409

3

1B

C408

6

1B

C592

4

0.1

B

C409

9

0.00

1B

C409

8

1B

C409

6

1B

C411

2

0.00

1B

C411

6

0.00

1B

C407

8

1B

C410

4

0.1

B

C405

6

0.01

B

C4105

100P CH

C408

7 116

VB

C412

2

0.1

B

C592

2

1B

C592

3

0.01

B

C410

0

220

6.3V

YK

R402

1

100K

R401

3

39+-

1%

R4058

100

R403

5

360

+-1%

R400

8

1.5K

+-1%

R4012

68 +-1%

R4011

15

R590

1

10K

R592

1

22K

TP4031

W826

W837

W822

W821

W820

W838




B4002

MMZ1608R102CT

B4001

MMZ1608R102CT

V+3F

V+6AV+5 V+5

V+12AT V+12ATV+12 V+12

D_GND

V+6A V+6AV+5S V+5SV+3F V+3F

D_GND

M_GND

V+5H V+5HV+3H V+3H

DVDD18 DVDD18

V+3 V+3V+3E V+3EV+1R8 V+1R8

V+3A

ADAC_GND

PWDN#

FLDC-

FLDC+

-28V

D_GND

D_GND

TO LOADER/MOTOR DRIVE

G-14G-13

TO HDMI

(CP502)

(DVD MT PCB)

DMF073

FRROM/TO MEMORY


TO AUDIO/VIDEO/JACK

PCB130

POWER PORT SCHEMATIC DIAGRAM

FROM/TO POWER

GND

P.CON+5V

STBY L

FL DC-

FL DC+

AT+3.3V

GND

P.CON+12V

AT+12V for MUTE

GND(M)

GND(D)

P.CON+6V

AT+3.3V

-28V

ADJVIN VOUT

1.8 0.63.3

(HDMI)

(HDMI)

(VIDEO/OPT/COAX)

(AUDIO AMP)

(AUDIO MUTE)

3.9

3.3

(CORE)

(MPEG/SDRAM/FLASH)

(FIP/LED/IR/RESET)

(F/E)

(OPU)

(MOTOR)

VIN

GND GND

ON/OFF NR

VOUT

+3.3V

5.0

5.9

0

5.9

(HDMI)

5.0

0

1.3

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

D527

SR240-F

D534

1SS133

D513

1H3-E

D509

_1

RL10

6F-E

D505

1N4005-EIC

D511

1H3-

E D519

1F5-E

D510

FR155-F

D515

1S40-E

D516

1SS133

D525

1SS1

33

D512

FR155-F

D506

1N4005-EIC

D503

1N4005-EIC

D502

1N4005-EIC

D520

1SS1

33D5

21

1SS1

33D5

22

1SS1

33

D532

1S40-E

D523

MTZ

J3.6

B-EI

C

D517

MTZ

J4.3

B-EI

C

D508

MTZ

J5.6

B-EI

C

D531

MTZJ27B-EIC

D535

MTZ

J5.1

B-EI

C

D536

MTZ

J3.0

B-EI

C

D528

MTZ

J5.1

B-EI

C

D533

MTZJ2.2B-EIC

L503

22uH TSL0808

L505

22uH

F501_11.6A125V

L501SS11V-03550-CH

1 2

3 4

FH501_1EYF-52BCY

FH502_1EYF-52BCY

IC504PS2561AL1-1-V(W)

PHOTO COUPLER

123

4

R510_1

3.3 1W

R529

220 1W

REPLACE ONLY WITH THE SAME TYPE FUSE:FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,CAUTION

N’UTILISER QUE DES FUSIBLE DE MEME TYPE:POUR UNE PROTECTION CONTINUE LES RISQUES D’INCEIEATTENTION

IC501 KIA431A-ATVOLTAGE CTL

123

CP501A3963WV2-3PD

12

1.6A 125V

1.6A 125V

R507

10 1/4W

R511

68 1/4W

Q506KTA1504S_Y_RTK

PROTECT

T501

81291294

10

11

12

13

14

15

16

2

3

4

6

7

8 9

IC503PQ070XF01SZH

6V REG (DVD MOTOR) IC

1 2 3 4BL

ADE

WID

E

BLACK

WHITE

21

CD50109618901

AC120V_60Hz(US)

C520 10

050

VYK

CD502CU2E3301

CORD CONNECTOR

R546

3.3K 1/4W

M +-1%

R517

1.2K

1/4W

+-1%

R542

820 1/

4W+-1%

CP502A2001WV2-14P

1

10

11

12

13

14

2

3

4

5

6

7

8

9

C535 330

16V

YK

C531 100

16V

YK

C511 82

400V

UP

C521

1000

16V

FM

C523

470

25V

YK

C526

470

6.3V

YK

C536 22

06.

3VYK

Q505

KRC1

02SR

TK

P.CO

N SW


Q512KTC3875S_Y_RTK

FL+ CTL

Q502KTC3209_Y

-28V P.CON SW

Q501KTC3875S_Y_RTK

PROTECT

Q509KTC3875S_Y_RTK

REG+12V CTL

Q511KTC3875S_Y_RTK

REG+12V CTL

Q5152SD1835S/T-AA

P.CON+5V REG

Q503KTA1504S_Y_RTK

-28V CTL

Q513KTA1504S_Y_RTK

FL+ CTL

Q504KTA1281_Y

FL+ P.CON SW

Q510KTA1281_Y

REG P.CON+12V SW


ARE



C518 0.00

125

0VKX

C502

_1

0.22

275V

ECQU

L

C513

47P

2KV

SL

C516

0.00

2225

0VKX

C515

_1

0.01

400V

ECQP

C508

680P

CH

C540

0.01 BC503

0.1 B

C501

0.01 B

C507

0.01 B

C541

0.01 B

C538

220

6.3V

YK

C528

2.250V KA

C506

2.2

50V

KA C509 10

50V

YK

C517

220

25V

YK

C522

1000

6.3V

FM

C519 22

35V

YK

C527

100

10V

YK

R524

1K1/

4W

R531

10K

R523

22K

R519

3.3K

R526

6.8K

+-1%

R545

22K +-1%

R541

5.6K

+-1%

R536

10K

R502

1.8

1WR5

04

680K

R505

22 1/4W

R512

_1

100K

1/2W

R530

560

1/4W

R528

22K

1/4W

R544

10K

R534100 1/4W

R514

1K 1/4W

R527

100 1/4W

R539

4.7K

1/4W

R515

1K

R513

10K 1/4W

R518

3.3K

+-1%

R516 10

R509

1K

R540

680

1/4W

R543

4.7K

+-1%

R503

1.5M

1/2W

R547

22

R538

22K

R506

100

R525

100

R537

1KR548

1K

IC50

2ST

R-A6

131M

POW

ER C

TL IC

1 2 3 4

5678

W817

W81

4

W803W804




B501

W4B

RH3.

5X6X

1.0X

2

GND

(POWER PCB)POWER SCHEMATIC DIAGRAM

FROM/TO POWER PORT

(CP4003)

PCB240DPF010

5.8

7.0 5.1

1.207.0 5.9

NTSC

L

N

NC

NC

NCDDOC

P

VCC

GND

FB/O

LPST

ARTU

P

20.8

6.8

28.4

28.4

27.8

21.6

0.6

020.7

21.5

0

17.5 3.90.1

130 130 130

9.90

3.9 10.9

0

0

0

0

0

0

0

130

130

0

130

0

-22.5

-22.5

0

0

NC

1.6A 125V{F501}

1.6A 125V{F501}

0.6

19.7

19.019.0

0

9.9

0

3.2

0

3.2

0 2.59.9

GNDOUT IN

4.5

12.35.0

4.5

12.95.1

12.6

12.3

12.9

IN GNDOUT

7.0

0

02.8

BLACK(L)

WHITE(N)

P.CON+12V

P.CON+5V

FL DC-

FL DC+

GND

GND

AT+12V for MUTE

P.CON+6V

-28V

GND(M)

GND(D)

AT+3.3V

AT+3.3V

P.ON-H

CHASSIS GND

G-16G-15

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

IC651

PT6315

FIP DRIVER IC

110

11

1213141516171819

2

202122

2324

2526

2728

29

3

3031

3233

34 35 36 37 38 39

4

40 41 42 43 44

56

78

9

Vout

B+

GND

OS651

ROM-N338TAO

1

2

3

D660

LTL-1CHEE-002A

HDMI LED(RED)

SW652

EVQ11L05R

DOWNSW653

EVQ11L05R

ENTER

SW654

EVQ11L05R

RIGHT

SW657

EVQ11L05R

UP

SW659

EVQ11L05R

LEFT

SW661

EVQ11L05R

HOMEMENU

SW666

EVQ11L05R

EJECT

SW658

EVQ11L05R

TOPMENU

SW656

EVQ11L05R

MENU

SW655

EVQ11L05R

RETURN

SW66

0

EVQ1

1L05

R

STOP

SW66

5

EVQ1

1L05

R

PAUS

ESW

664

EVQ1

1L05

R

-SKI

P

SW66

3

EVQ1

1L05

R

PLAY

SW66

2

EVQ1

1L05

R

+SKI

P

SW66

7

EVQ1

1L05

RPO

WER

V651 HNV-08SS44T

110111213141516171819 22021222324252627283132 56789

CP60200_6232_009_102_800+

1

2

3

4

5

6

7

8

9

CP60300_6232_009_102_800+

1

2

3

4

5

6

7

8

9

D667

1SS1

33

MS1

_0D659 1SS133

D651

1SS1

33D6

54

1SS1

33D6

56

1SS1

33D6

58

1SS1

33

D657 1SS133

D652 1SS133

D655 1SS133

CD6012H0B1003

FFC(1.0mm pitch)

CD6022H091303

FFC(1.0mm pitch)

CD60

42H

0517

06

FFC(

1.0m

m p

itch)

CP60

400

_623

2_00

5_10

2_80

0+12345

CP60

500

_623

2_00

5_10

2_80

0+

1 2 3 4 5

C651

0.1

B

C658

0.1

B

C676

0.1

B

C675

0.1

B

C604

33P CHC605

0.001 BC668

0.01 B

C653

476.

3VKA

C674 47

6.3V

KA

R652

2.2 R653

2.2 R654

2.2 R662

100K

R651

2.2

R666

2.2 1/4W

R657

10K

R658

10K

R655

1K R656

1K

R664

330 1/4W

TP66

2

TP663

CP60100_6232_011_102_800+

1

10

11

2

3

4

5

6

7

8

9

W805

W80

7

W80

8

W804

W80

9




FLDC-

FLDC+

P16

P15

P14

P13

P12

P11

P10

P9 P8 P7 P6 P5 P4 P3 P2 P1 GR8

GR7

GR6

GR5

GR4

GR3

GR2

GR1

-28V

P8 P9 P10

P11

P12

P13

P14

P15

P16

P7

P6

P5 STB

P4 FP_SCK

P3 FP_DI

P2 FP_DO

P1

GR8

GR7

GR6

GR5

GR4

GR3

GR2

GR1

LED

V+3E

LED

IR

FP_SCK

FP_DI

STB

FP_DOV+3E IR

V+3E

FLDC+

-28V

FLDC-

GND

FROM/TO MPEG/MICON/DSPPCBDF0DEF086

PCBDG0DEF095

PCB270DEF084

DEF085PCB280

(CP4002)

(CP602)

NC

NC

STB

12

VDD

23

-12.0

-6.0

-18.0 3.2

0

0

0-19.0 -15.6-19.0-9.5-13.0-9.5-12.6-13.0-6.0

LED1

LED2

LED4

CLK

34

VDD

44

NC

NC

NC

NC

-18.0

-18.0

-18.0

-18.0

-18.0

-18.0

-18.0

-18.0

-16.0 -16.0 -16.0 -16.0-16.0 0

0

2.9

3.2

0.7

3.4

NC

K2

K1

DI

DO

OSC

GND

P16

P15

P14

P13

P12

P11

P10

P9P8

P7P6

GR12

P5

P4

P3

P2

P1

-28V

GR10

GR11

GR9

GR8

GR7

GR6

GR5

GR4

GR3

GR2

GR1

GND

LED3

-16.0-18.0-18.0-18.0

0

0

0

SW2

NC

NC

SW1

POWER

PLAY/+SKIP

STOP

FL-

FL-

FL+

FL+

P16

P15

P14

P13

P12

P11

P10

DVD CD TRACK ALL REPEAT A B

P9 P8 P7 P6 P5 P4 P3 P2 P1 G8 G7 G6 G5 G4 G3 G2 G1

30

DISPLAY SCHEMATIC DIAGRAM

(CP603)

3.3

3.3

-25.

1

-25.

1

-25.

1

-25.

1

-25.

1

-25.

1

-25.

1

-25.

1

-20.

5

-26.

8

-26.

8

-26.

8

-20.

5

-20.

5

-22.

7

-20.

5

-20.

5

-22.

7

-26.

8

-26.

8

-20.

5

-22.

7

-22.

7

-26.

8

-19.

7

-19.

7

-22.

3

-22.

3

DGND

DGND

FLDC+

-28V

FLDC-

DI (M to F)

V+3E

STB

DO (F to M)

IR

CLK

SW1

GND

PAUSE/-SKIP

LED

SW2

V+3E

SW1

STOP

PLAY/+SKIP

PAUSE/-SKIP

GND

POWER

LED

(OPERATION4 PCB)

(OPERATION3 PCB)

SW2

V+3E

(CP6

05)

SW2

POW

ER

GND(

NC)

V+3E

LED

(CP6

04)

SW2

POW

ER

GND(

NC)

V+3E

LED

(OPERATION2 PCB)

(OPERATION PCB)

G-18G-17

A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8


(SW PCB)(LOADING MOTOR PCB)

G-20G-19

LOADING MOTOR/SW SCHEMATIC DIAGRAM

DED021PCB610

CD2302

BCZ3B05

JCV9B12M2601

M2602

ESE22MH22SW2

BCZ3B05M2603M

M

M

2H061605CD2301

DED020PCB640

SPINDLE MOTOR(+)

SPINDLE MOTOR(-)

FEED MOTOR(-)

GND(SW)

FEED MOTOR(+)

PICK UO INNER LIMIT SWITCH

6

5

4

3

2

1

5

4

3

2

1

SW-2(CLOSE)

GND(SW)

SW-1(OPEN)

LOADING MOTOR(-)

LOADING MOTOR(-)

2H051602

SSS-28-5SW1


ARE



A B C D E F G H

A B C D E F G H

2

1

3

4

5

6

7

8

2

1

3

4

5

6

7

8

1918171615141312111098764 5321CP59

01

HDM

I CON

NECT

OR

9

8

7

6

4

5

3

2

1

CP603

9

8

7

6

4

5

3

2

1

CP602

11

10

9

8

7

6

5

4

3

2

1

11

10

9

8

7

6

5

4

3

2

1

14

13

12

11

10

9

8

7

6

4

5

3

2

1

CP502

14

13

12

11

10

9

8

7

6

4

5

3

2

1

CP4003

54321 CP60

5

5 4 3 2 1

CP60

4

5

4

3

2

1

CP2302

6

5

4

3

2

1

CP2303

24

23

22

21

20

19

2

1

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

CP2301

OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICETHE TIMETHIS INTERCONNECTION DIAGRAM IS THE LATEST ATNOTE:

Vout

B+ GND

OS65

1

123

CP501CONNECTOR

12BL

ADE

WID

E

BLACK

WHITE

21

CD501AC120V_60Hz(US)

H1H2

E

H1H2

E

J7302CVBS/Y/U/V

1

23

4

56

E E

H

J7301S+COAXIAL

1234

5

7

8

H1H2

E

J8003DVD AUDIO OUT

1

23


ARE



DVD MT PCB

OPERATION PCB

INTERCONNECTION DIAGRAM

SW(GND)

LIMIT SW

SLD-

SLD+

SPD-

SPD+

SW(GND)

LIMIT SW

SLD-

SLD+

SPD-

SPD+

OPERATION4 PCB

PCBDG0DEF095

OPERATION3 PCB

DEF086PCBDF0

P.ON-HP.ON-H

LOAD+

LOAD-

GND

OPEN

CLOSE

LOAD+

LOAD-

GND

OPEN

CLOSE

P.CON+12V

P.CON+5V

FL DC-

FL DC+

GND

GND

AT+12V for MUTE

P.CON+6V

-28V

GND(M)

GND(D)

AT+3.3V

AT+3.3V

D2+

D2-S

D2-

D1+

D1-S

D0+

D0-S

D0-

CLK-

S

CLK- CEC

SCL

SDA

GND

POW

ER

HOTP

LUG

NCD1-

CLK+

L

NNN

L

DEF084PCB270

OPERATION2 PCB

DEF085PCB280

PCB240

DMF073

DPF010

POWER PCB

(CD502)

14

13

14

13

12

11

10

9

8

7

6

5

4

3

2

1

12

11

10

9

8

7

6

5

4

3

2

1

B

A

VRCOM

VR780(CD)

VRF(RF_OUT)

SW1(DVD/CD)

C

VR650(DVD)

GND

LD_DVD(650)

LD_CD(780)

PD/GND

TRKG DRV

TRKG RTN

FOCS RTN

FOCS DRV

VCC

D

E

VS

F

GND

GND

NC

VRCOM

TRKG DRV

TRKG RTN

FOCS RTN

FOCS DRV

VCC

D

B

VR780(CD)

VRF(RF_OUT)

SW1(DVD/CD)

C

E

VS

F

GND

A

VR650(DVD)

GND

GND

LD_DVD(650)

LD_CD(780)

PD/GND

NC

(CD6

04)

56789

54321

LED

V+3E

GND(

NC)

POW

ER

SW2

(CD602)

5

6

7

8

9

5

4

3

2

1

LED

V+3E

GND(

NC)

POW

ER

SW2

PAUSE/-SKIP

PLAY/+SKIP

V+3E

SW2

LED

GND

STOP

POWER

SW1

PAUSE/-SKIP

PLAY/+SKIP

V+3E

SW2

LED

GND

STOP

POWER

SW1

9

8

7

4

2

1

3

6

FLDC-

FLDC+

V+3E

-28V

DGND

DGND

DO (F to M)

DI (M to F)

IR

STB

CLK

DGND

DGND

FLDC+

-28V

FLDC-

DI (M to F)

V+3E

STB

DO (F to M)

IR

CLK

AT+3.3V

DM-4PB

PCB130

(CD601)

11

10

9

8

7

6

5

4

3

2

1

11

10

9

8

7

6

5

4

3

2

1

CP601 CP4002

GND

P.CON+5V

FL DC-

FL DC+

-28V

AT+3.3V

GND

P.CON+12V

AT+12V for MUTE

P.CON+6V

GND(M)

GND(D)

FG SENSER

SPINDLE MOTOR

SLED,LOADING MOTOR

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

6

5

4

3

2

1

6

5

4

3

2

1

DRIVEDVD

OPTICAL PICK-UP

G-22G-21

WAVEFORMS

H-1

The following waveforms were measured at the point of the correspondingballoon number in the schematic diagram.

NOTE:

1

MPEG/MICON/DSP

500µs

200mV

9

500µs

1.0V

5

20µs

1.0V

2

3

2ns

1.0V

200ns

1.0V

AUDIO JACK

10µs

500mV

17

200ns

500mV

11

10

500µs

1.0V

20µs

500mV

16

12

10µs

200mV

13

10µs

500mV

20µs

500mV

14

VIDEO JACK

20µs

500mV

15

1µs

500mV

30

DISPLAY

MECHANICAL EXPLODED VIEW

I1-1

206

110

206

206

206

206

101E

101C

101L

101H

101J

101K

101I

101B

101F101G

101A

205

205

205

205

PCB270(OPERATION PCB ASS'Y)

109108

113

204

101M

101D

101

205

PCBDG0(OPERATION 4 PCB ASS'Y)

PCBDF0(OPERATION 3 PCB ASS'Y)

205204

113

205

205

PCB280(OPERATION 2 PCB ASS'Y)

208

208

208

209

209

209

209

203112

106

106

104

103

201

102

115

105

115

PCB240(POWER PCB ASS'Y)

202

202

202

202107

PCB130(DVD MT PCB ASS'Y)

202

202 202

202

111

114207

111

114207

111

114207

111

114207

MECHANICAL EXPLODED VIEW(PACKING DIAGRAM)

I1-2

PACKAGE

GIFT SHEET

POLYBAG,INSTRUCTION (RED CAUTION)INSTRUCTION BOOKGUARANTEE CARD

GIFT BOX

PACKAGE

BATTERY,MANGAN

PACKAGE

PACKAGE

POLY BAG INSTA5TRANSMITTERCORD,RCA PINCORD,RCA PIN

CARTION LABEL

DVD DECK EXPLODED VIEW

I2-1

600

Applying positions AA, AB and AC for the grease are displayed for this section.Check if the correct grease is applied for each position.

NOTE:CLASS MARK

GREASE G-555G AA

G-313Y AB

PART NO.

Y315061000

PART NAME

Y315141000

FL-78A ACY315161000

610

608

M2603

704

612

614

615

613602

609

611

AB

607

Cannot supply separately.If the repair is needed, replace the LOADER SUB ASS'Y.

SW1

PCB610(LOADING MOTOR PCB ASS'Y)

CD2302

701

Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more.If the repair is needed, replace the DVD MECHA ASS'Y.

PCB640(SW PCB ASS'Y)

707

702702

616

604

CD2001

603

M2602

606

617

706

703

605

601605

SW2

705CD2301

AC

AC

AB

ABAB

AB

AB

AB

AA

ABAB

MECHANICAL REPLACEMENT PARTS LIST

REF. NO. PART NO. DESCRIPTION 101 7A701A785A FRONT CABI ASS'Y 101A CABINET FRONT 101B PANEL FRONT 101C PLATE DISPLAY 101D FLAP DVD 101E GLASS LED 101F BADGE BRAND 101G SHEET DOUBLE TAPE 101H BUTTON CAP 101I BUTTON CAP EJECT 101J BUTTON FRAME 2 101K BUTTON FRAME 3 101L BUTTON FRAME 1 101M SPRING FLAP-DVD

102 NSP PLATE BOTTOM 103 NSP SHEET JACK 1 104 NSP SHEET JACK 3 105 NSP SHEET CAUTION 106 761WPA0396 HOLDER FFC 107 755WPAA031 PLATE COVER POWER or 755WPAA032 PLATE COVER POWER 108 7290000156 DOUBLE FACE-TAPE 109 752WSA0466 PLATE FIP

110 702WSBA071 CABINET TOP 111 704WPA0054 LEG 112 NSP SHEET JACK 2 113 743WKAA015 SPRING EARTH 114 800WR0A028 CUSHION LEG 115 8965TS1015 CUSHION 65TS10-5 10x5x15

201 810213060U SCREW PAN M3x6 202 8107D3055U SCREW TAP TITE(S)R WH8 3x5.5 203 810913060U SCREW TAP TITE(B) PAN 3x6 204 8110I2680U SCREW TAP TITE(P)BIND WH7 M2.6x8 205 811022680U SCREW TAP TITE(P) BIND 2.6x8 206 8109K3060S SCREW TAP TITE(B) BIND(3D) 3x6 207 810923070U SCREW TAP TITE(B) R BIND 3x7 208 811022680S SCREW TAP TITE(P)BIND 2.6x8 209 816423063U SCREW TAP TITE(S)-R BIND WASHER8 3x6.3

--- 723000D382 CARTON LABEL --- 791WHA0113 GIFT SHEET --- 791WHAA040 POLY BAG INSTA5 --- 792WHAA169 PACKAGE --- 793WCDD254 GIFT BOX --- A2I918A975 INSTRUCTION BOOK KIT --- J2I91801A INSTRUCTION BOOK --- NSP GUARANTEE CARD --- JB5UD200 POLYBAG INSTRUCTION(RED CAUTION)

J1-1

NOTE: "NSP" is Not Service Part.

DVD DECK REPLACEMENT PARTS LIST

REF. NO. PART NO. DESCRIPTION ! 600 A2I802A650 DVD MECHA ASS'Y A2I802A650

601 92P100125A HOLDER,TRAVERSE 602 92P100122A CLAMPER 603 92P100088A GEAR,MOTOR 604 92P100117A GEAR,MIDDLE 605 92P200013A INSULATOR(F) 606 92P200016A INSULATOR(R) 607 92AAA0019B LOADER SUB ASS'Y(B) 608 92P100123A GEAR,PULLEY 609 92P100097A PULLEY,MOTOR

610 92P100124A GEAR,MAIN 611 92P200015A BELT,LOADING 612 92P000023A PLATE,CLAMPER 613 92P100121A RACK,LOADING 614 92P100119A FRAME,MAIN 615 92P100127B TRAY(B) 616 92P100116A GEAR,FEED 617 92AAA0017A FEED RACK ASS'Y

701 811022680U SCREW TAP TITE(P) BIND 2.6x8 702 814011723U SCREW,PAN M1.7x2.3 P3 703 816112080U SEMS.TAP TITE(P) PAN W10 2x8 704 814011730U SCREW,PAN M1.7x3 P3 705 811022080U SCREW,TAP TITE(P) BIND 2x8 706 813381750U SCREW,T-TITE(B)CAMERA PAN M1.7x5.0 P3 707 92P700007A SCREW,GEAR FEED

CD2001 122J4O2202 CORD JUMPER 127000-2929 CD2301 122H061605 CORD JUMPER 2H061605 CD2302 122H051602 CORD JUMPER 2H051602 ! M2602 1515S98004 MOTOR BCZ3B05 ! M2603 1515S98004 MOTOR BCZ3B05 PCB610 A2F101A610 LOADING MOTOR PCB ASS'Y DED021A PCB640 A2F101A640 SW PCB ASS'Y DED020A SW1 0515S32003 SWITCH (SLIDE) SSS-28-5 SW2 0500101036 PUSH SWITCH ESE22MH22

J2-1

ELECTRICAL REPLACEMENT PARTS LIST

REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTIONRESISTORS RESISTORS

R502 R,METAL OXIDE 1.8 OHM 1W R2335 RC 2.2 OHM 1/16W R503 RC 1.5M OHM 1/2W R2337 RC 5.6K OHM 1/16W R504 RC 680K OHM 1/16W R2338 RC 10K OHM 1/16W R505 RC 22 OHM 1/4W R2341 RC 10K OHM 1/16W R506 RC 100 OHM 1/16W R2342 RC 680K OHM 1/16W R507 R,FUSE 10 OHM 1/4W R2343 RC 10K OHM 1/16W R509 RC 1K OHM 1/16W R4001 RC 33 OHM 1/16W R510 R,METAL OXIDE 3.3 OHM 1W R4002 RC 10K OHM 1/16W R511 R,FUSE 68 OHM 1/4W R4003 RC 680K OHM 1/16W R512 RC 100K OHM 1/2W R4004 RC 10K OHM 1/16W R513 RC 10K OHM 1/4W R4006 RC 10K OHM 1/16W R514 RC 1K OHM 1/4W R4007 RC 15K OHM 1/16W R515 RC 1K OHM 1/16W R4008 RC 1.5K OHM 1/16W R516 RC 10 OHM 1/16W R4009 RC 12K OHM 1/16W R517 R,METAL 1.2K OHM 1/4W R4010 RC 12K OHM 1/16W R518 RC 3.3K OHM 1/16W R4011 RC 15 OHM 1/16W R519 RC 3.3K OHM 1/16W R4012 RC 68 OHM 1/16W R523 RC 22K OHM 1/16W R4013 RC 39 OHM 1/16W R524 RC 1K OHM 1/4W R4014 RC 10K OHM 1/16W R525 RC 100 OHM 1/16W R4015 RC 10K OHM 1/16W R526 RC 6.8K OHM 1/16W R4018 RC 15K OHM 1/16W R527 RC 100 OHM 1/4W R4020 RC 100K OHM 1/16W R528 RC 22K OHM 1/4W R4021 RC 100K OHM 1/16W R529 R,METAL OXIDE 220 OHM 1W R4022 RC 750K OHM 1/16W R530 RC 560 OHM 1/4W R4024 RC 100K OHM 1/16W R531 RC 10K OHM 1/16W R4025 RC 68 OHM 1/16W R534 RC 100 OHM 1/4W R4027 RC 68 OHM 1/16W R536 RC 10K OHM 1/16W R4029 RC 33 OHM 1/16W R537 RC 1K OHM 1/16W R4030 RC 33 OHM 1/16W R538 RC 22K OHM 1/16W R4034 RC 10K OHM 1/16W R539 RC 4.7K OHM 1/4W R4035 RC 360 OHM 1/16W R540 RC 680 OHM 1/4W R4036 RC 10K OHM 1/16W R541 RC 5.6K OHM 1/16W R4037 RC 10K OHM 1/16W R542 R,METAL 820 OHM 1/4W R4039 RC 10K OHM 1/16W R543 RC 4.7K OHM 1/16W R4040 RC 10K OHM 1/16W R544 RC 10K OHM 1/16W R4045 RC 15K OHM 1/16W R545 RC 22K OHM 1/16W R4046 RC 2.7K OHM 1/16W R546 R,METAL 3.3K OHM 1/4W R4049 RC 150 OHM 1/16W R547 RC 22 OHM 1/16W R4050 RC 150 OHM 1/16W R548 RC 1K OHM 1/16W R4051 RC 150 OHM 1/16W R651 RC 2.2 OHM 1/16W R4052 RC 150 OHM 1/16W R652 RC 2.2 OHM 1/16W R4053 RC 22 OHM 1/16W R653 RC 2.2 OHM 1/16W R4054 RC 22 OHM 1/16W R654 RC 2.2 OHM 1/16W R4055 RC 22 OHM 1/16W R655 RC 1K OHM 1/16W R4056 RC 22 OHM 1/16W R656 RC 1K OHM 1/16W R4057 RC 10K OHM 1/16W R657 RC 10K OHM 1/16W R4058 RC 100 OHM 1/16W R658 RC 10K OHM 1/16W R4061 RC 10K OHM 1/16W R662 RC 100K OHM 1/16W R4062 RC 10 OHM 1/16W R664 RC 330 OHM 1/4W R4065 RC 33 OHM 1/16W R666 RC 2.2 OHM 1/4W R4066 RC 33 OHM 1/16W R2306 RC 100K OHM 1/16W R4072 RC 33 OHM 1/16W R2307 RC 100K OHM 1/16W R4073 RC 33 OHM 1/16W R2308 RC 10K OHM 1/16W R4074 RC 33 OHM 1/16W R2309 RC 10K OHM 1/16W R4075 RC 1K OHM 1/16W R2310 RC 2.7K OHM 1/16W R4076 RC 100 OHM 1/16W R2311 RC 10K OHM 1/16W R5901 RC 10K OHM 1/16W R2312 RC 10K OHM 1/16W R5906 RC 820 OHM 1/16W R2313 RC 10K OHM 1/16W R5916 RC 510 OHM 1/16W R2316 RC 10K OHM 1/16W R5918 RC 560 OHM 1/16W R2317 RC 10K OHM 1/16W R5919 RC 1.5K OHM 1/16W R2318 RC 10K OHM 1/16W R5920 RC 1.5K OHM 1/16W R2319 RC 150K OHM 1/16W R5921 RC 22K OHM 1/16W R2320 RC 4.7 OHM 1/16W R5922 RC 1K OHM 1/16W R2321 RC 4.7 OHM 1/16W R5923 RC 100 OHM 1/16W R2322 RC 4.7 OHM 1/16W R5928 RC 10 OHM 1/16W R2323 RC 4.7 OHM 1/16W R7302 RC 1K OHM 1/16W R2325 RC 15K OHM 1/16W R7306 RC 1K OHM 1/16W R2326 RC 4.7K OHM 1/16W R7315 RC 75 OHM 1/16W R2327 RC 4.7K OHM 1/16W R7316 RC 75 OHM 1/16W R2328 RC 10K OHM 1/16W R7317 RC 75 OHM 1/16W R2329 RC 1 OHM 1/16W R7318 RC 75 OHM 1/16W R2330 RC 10K OHM 1/16W R7322 RC 75 OHM 1/16W R2331 RC 150K OHM 1/16W R7323 RC 75 OHM 1/16W R2332 RC 1.2 OHM 1/16W R7324 RC 10K OHM 1/16W R2333 RC 1.2 OHM 1/16W R8014 RC 4.7K OHM 1/16W R2334 RC 2.2 OHM 1/16W R8035 RC 2.2K OHM 1/16W

J3-1


REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTIONRESISTORS CAPACITORS

R8036 RC 3.9K OHM 1/16W C2320 CE 100 UF 10V R8037 RC 1.8K OHM 1/16W C2321 CE 100 UF 10V R8038 RC 220 OHM 1/16W C2322 CC 0.0022UF 50V B R8039 RC 75 OHM 1/16W C2323 CC 0.1 UF 25V B R8040 RC 100K OHM 1/16W C4001 CC 0.1 UF 25V B R8044 RC 8.2K OHM 1/16W C4002 CC 0.1 UF 25V B R8048 RC 470K OHM 1/16W C4003 CC 0.1 UF 25V B R8049 RC 10K OHM 1/16W C4005 CC 0.1 UF 25V B R8051 RC 4.7K OHM 1/16W C4006 CC 0.1 UF 25V B R8056 RC 4.7K OHM 1/16W C4007 CC 0.1 UF 25V B R8057 RC 22K OHM 1/16W C4010 CC 220 PF 50V CH R8059 RC 10K OHM 1/16W C4011 CC 1 UF 10V B R8060 RC 470K OHM 1/16W C4012 CC 1 UF 10V B R8061 RC 10K OHM 1/16W C4013 CC 1 UF 10V B R8063 RC 27K OHM 1/16W C4014 CC 1 UF 10V B R8065 RC 4.7K OHM 1/16W C4016 CC 0.1 UF 25V B R8066 RC 10K OHM 1/16W C4018 CC 0.1 UF 25V B R8067 RC 27K OHM 1/16W C4019 CC 0.1 UF 25V B R8069 RC 22K OHM 1/16W C4020 CC 0.1 UF 25V B R8073 RC 22K OHM 1/16W C4022 CC 0.033 UF 25V B R8074 RC 22K OHM 1/16W C4023 CC 0.1 UF 25V B R8078 RC 470 OHM 1/16W C4024 CC 0.1 UF 25V B R8079 RC 220 OHM 1/16W C4025 CC 0.001 UF 50V B R8080 RC 220 OHM 1/16W C4026 CC 0.1 UF 25V B R8081 RC 470 OHM 1/16W C4027 CC 22 PF 50V CH R8084 RC 220 OHM 1/16W C4028 CC 0.1 UF 25V B R8085 RC 220 OHM 1/16W C4029 CC 0.047 UF 25V B

CAPACITORS C4030 CE 10 UF 25 V C501 CC 0.01 UF 50V B C4031 CC 0.047 UF 25V B C502 CMP 0.22 UF 275V ECQUL C4032 CC 0.47 UF 10V B C503 CC 0.1 UF 25V B C4033 CC 9 PF 50V CH C506 CE 2.2 UF 50V C4034 CC 0.1 UF 25V B C507 CC 0.01 UF 50V B C4035 CC 390 PF 50V CH C508 CC 680 PF 50V CH C4036 CC 0.1 UF 25V B C509 CE 10 UF 50V C4037 CC 11 PF 50V CH C511 CE 82 UF 400V C4038 CC 1 UF 10V B C513 CC 47 PF 2KV SL C4039 CE 10 UF 25 V C515 CP 0.01 UF 400V ECQP C4040 CC 1 UF 10V B C516 CC 0.0022UF 250V C4046 CC 0.0068UF 50V B C517 CE 220 UF 25V C4047 CE 1000 UF 6.3V C518 CC 0.001 UF 250V C4048 CC 0.1 UF 25V B C519 CE 22 UF 35V C4049 CC 0.1 UF 25V B C520 CE 100 UF 50V C4050 CE 1000 UF 6.3V C521 CE 1000 UF 16V C4051 CC 0.1 UF 25V B C522 CE 1000 UF 6.3V C4052 CC 0.1 UF 25V B C523 CE 470 UF 25V C4055 CC 0.1 UF 25V B C526 CE 470 UF 6.3V C4056 CC 0.01 UF 50V B C527 CE 100 UF 10V C4057 CC 0.1 UF 25V B C528 CE 2.2 UF 50V C4058 CC 0.1 UF 25V B C531 CE 100 UF 16V C4059 CC 0.0015UF 50V B C535 CE 330 UF 16V C4060 CC 0.1 UF 25V B C536 CE 220 UF 6.3V C4062 CC 0.001 UF 50V B C538 CE 220 UF 6.3V C4063 CC 0.1 UF 25V B C540 CC 0.01 UF 50V B C4064 CC 0.1 UF 25V B C541 CC 0.01 UF 50V B C4065 CC 0.1 UF 25V B C604 CC 33 PF 50V CH C4066 CC 1 UF 10V B C605 CC 0.001 UF 50V B C4067 CC 0.1 UF 25V B C651 CC 0.1 UF 25V B C4071 CC 0.1 UF 25V B C653 CE 47 UF 6.3V C4072 CC 100 PF 50V CH C658 CC 0.1 UF 50V B C4073 CC 0.1 UF 25V B C668 CC 0.01 UF 50V B C4074 CC 0.1 UF 25V B C674 CE 47 UF 6.3V C4075 CC 100 PF 50V CH C675 CC 0.1 UF 25V B C4077 CC 0.0082UF 50V B C676 CC 0.1 UF 25V B C4078 CC 1 UF 10V B C2301 CC 0.1 UF 25V B C4079 CC 0.1 UF 25V B C2302 CC 0.1 UF 25V B C4080 CE 220 UF 6.3V C2303 CC 0.1 UF 25V B C4081 CC 33 PF 50V CH C2305 CC 0.1 UF 25V B C4082 CC 100 PF 50V CH C2306 CE 100 UF 10V C4083 CC 33 PF 50V CH C2307 CC 1 UF 10V B C4084 CC 100 PF 50V CH C2308 CC 0.1 UF 25V B C4086 CC 1 UF 10V B C2309 CC 0.1 UF 25V B C4087 CC 1 UF 16V B C2310 CC 0.01 UF 50V B C4088 CC 1 UF 10V B C2311 CC 0.01 UF 50V B C4089 CC 0.015 UF 50V B C2312 CC 1 UF 10V B C4090 CC 0.1 UF 25V B C2313 CC 0.01 UF 50V B C4093 CC 1 UF 10V B C2314 CC 1 UF 10V B C4094 CC 0.1 UF 25V B

J3-2


REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTIONCAPACITORS DIODES

C4095 CE 47 UF 6.3V D509 DIODE,RECTIFIER RL106F-E C4096 CC 1 UF 10V B D510 DIODE,SILICON FR155-F C4098 CC 1 UF 10V B D511 DIODE,RECTIFIER 1H3-E C4099 CC 0.001 UF 50V B D512 DIODE,SILICON FR155-F C4100 CE 220 UF 6.3V D513 DIODE,RECTIFIER 1H3-E C4101 CC 470 PF 50V CH D515 DIODE,SCHOTTKY 1S40-E C4102 CC 470 PF 50V CH D516 DIODE,SILICON 1SS133T-77 C4103 CC 0.0022UF 50V B D517 DIODE,ZENER MTZJ4.3B-EIC C4104 CC 0.1 UF 25V B D519 DIODE,SILICON 1F5-E C4105 CC 100 PF 50V CH D520 DIODE,SILICON 1SS133T-77 C4112 CC 0.001 UF 50V B D521 DIODE,SILICON 1SS133T-77 C4114 CC 1 UF 10V B D522 DIODE,SILICON 1SS133T-77 C4116 CC 0.001 UF 50V B D523 DIODE,ZENER MTZJ3.6B-EIC C4122 CC 0.1 UF 50V B D525 DIODE,SILICON 1SS133T-77 C5901 CC 0.1 UF 25V B D527 DIODE,SCHOTTKY SR240-F C5902 CC 0.1 UF 25V B D528 DIODE,ZENER MTZJ5.1B-EIC C5903 CC 0.1 UF 25V B D531 DIODE,ZENER MTZJ27B-EIC C5904 CC 0.1 UF 50V B D532 DIODE,SCHOTTKY 1S40-E C5905 CC 0.001 UF 50V B D533 DIODE,ZENER MTZJ2.2B-EIC C5908 CE 100 UF 10V D534 DIODE,SILICON 1SS133T-77 C5910 CC 0.0056UF 50V B D535 DIODE,ZENER MTZJ5.1B-EIC C5911 CC 0.1 UF 25V B D536 DIODE,ZENER MTZJ3.0B-EIC C5912 CC 0.1 UF 25V B D651 DIODE,SILICON 1SS133T-77 C5913 CC 0.1 UF 25V B D652 DIODE,SILICON 1SS133T-77 C5914 CC 0.1 UF 25V B D654 DIODE,SILICON 1SS133T-77 C5915 CC 0.1 UF 25V B D655 DIODE,SILICON 1SS133T-77 C5916 CC 0.1 UF 25V B D656 DIODE,SILICON 1SS133T-77 C5917 CC 0.1 UF 25V B D657 DIODE,SILICON 1SS133T-77 C5918 CC 0.1 UF 25V B D658 DIODE,SILICON 1SS133T-77 C5919 CE 47 UF 6.3V D659 DIODE,SILICON 1SS133T-77 C5920 CC 0.1 UF 25V B D660 LED LTL-1CHEE-002A C5921 CE 10 UF 25 V D667 DIODE,SILICON 1SS133T-77 C5922 CC 1 UF 10V B ICS C5923 CC 0.01 UF 50V B IC501 I1KJ9A431A IC KIA431A-AT C5924 CC 0.1 UF 25V B IC502 I0BD061310 IC STR-A6131M C5925 CC 0.1 UF 50V B IC503 I0GA9XF010 IC PQ070XF01SZH C7303 CE 470 UF 6.3V IC504 000220002W PHOTO COUPLER PS2561AL1-1-V(W) C7304 CC 0.1 UF 25V B IC651 IF4K063150 IC PT6315 C7305 CC 0.1 UF 25V B IC2301 I03FV65650 IC LA6565VR-TLM-E C7306 CC 1 UF 10V B IC4001 IC8K0389E0 IC MT1389FE/E-L C7307 CC 1 UF 10V B IC4002 I57F04L080 IC BR24L08FJ-WE2 C7308 CC 1 UF 10V B IC4003 I97F052290 IC BD5229G-TR C7309 CC 1 UF 10V B IC4004 S2I918AF02 MEMORY DATA S29AL016D70TFI020 C7310 CC 1 UF 10V B IC4005 IG2J081657 IC EM638165TS-7G C7311 CE 100 UF 10V IC4006 I1TF911170 IC LM1117S-ADJ C7312 CC 0.1 UF 25V B IC5901 IC8K013920 IC MT1392E/C-L C7313 CC 0.1 UF 25V B IC5902 I0GF9K5030 IC PQ1K503M2ZPH C7316 CE 470 UF 6.3V IC7301 I03FG30540 IC LA73054-TLM-E C7317 CE 470 UF 6.3V IC8003 I04J045800 IC RC4580IDR C7318 CE 1000 UF 6.3V TRANSISTORS C7319 CE 1000 UF 6.3V Q501 TRANSISTOR,SILICON KTC3875S_Y_RTK C7324 CC 0.1 UF 50V B Q502 TRANSISTOR,SILICON KTC3209_Y-AT C7325 CE 470 UF 6.3V Q503 TRANSISTOR,SILICON KTA1504S_Y_RTK C8036 CC 1 UF 10V B Q504 TRANSISTOR,SILICON KTA1281_Y C8038 CE 1 UF 50V Q505 COMPOUND TRANSISTOR KRC102SRTK C8042 CC 100 PF 50V CH Q506 TRANSISTOR,SILICON KTA1504S_Y_RTK C8051 CE 47 UF 16V Q509 TRANSISTOR,SILICON KTC3875S_Y_RTK C8053 CE 47 UF 16V Q510 TRANSISTOR,SILICON KTA1281_Y C8056 CC 560 PF 50V CH Q511 TRANSISTOR,SILICON KTC3875S_Y_RTK C8057 CC 560 PF 50V CH Q512 TRANSISTOR,SILICON KTC3875S_Y_RTK C8058 CC 0.1 UF 25V B Q513 TRANSISTOR,SILICON KTA1504S_Y_RTK C8059 CC 0.1 UF 25V B Q515 TRANSISTOR,SILICON 2SD1835S/T-AA C8066 CE 100 UF 10V Q2301 TRANSISTOR,SILICON KTC3875S_Y_RTK C8067 CC 68 PF 50V CH Q2302 TRANSISTOR,SILICON KTA1504S_Y_RTK C8069 CC 68 PF 50V CH Q2303 TRANSISTOR,SILICON KTA1504S_Y_RTK C8070 CE 47 UF 16V Q2304 TRANSISTOR,SILICON KTA1504S_Y_RTK C8072 CC 0.1 UF 25V B Q2305 TRANSISTOR,SILICON KTA1504S_Y_RTK C8073 CE 47 UF 16V Q2306 FET 2SK3018T106 C8074 CC 330 PF 50V CH Q2307 FET 2SK3018T106 C8077 CC 330 PF 50V CH Q4001 TRANSISTOR,SILICON KTC3875S_Y_RTK C8078 CC 330 PF 50V CH Q7302 COMPOUND TRANSISTOR KRC407-RTK/P

DIODES Q8005 TRANSISTOR,SILICON KTC3875S_Y_RTK D502 DIODE,SILICON 1N4005-EIC Q8010 COMPOUND TRANSISTOR KRC407-RTK/P D503 DIODE,SILICON 1N4005-EIC Q8013 COMPOUND TRANSISTOR KRC407-RTK/P D505 DIODE,SILICON 1N4005-EIC Q8014 TRANSISTOR,SILICON KTA1504S_Y_RTK D506 DIODE,SILICON 1N4005-EIC Q8018 TRANSISTOR,SILICON KTC2875-B-RTK/P D508 DIODE,ZENER MTZJ5.6B-EIC Q8019 TRANSISTOR,SILICON KTC2875-B-RTK/P

J3-3


REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTIONCOILS &TRANSFORMERS MISCELLANEOUS

L501 COIL,LINE FILTER SS11V-03550-CH TM601 TRANSMITTER SBBM00102A L503 COIL R7 22 UH V651 096F82R601 TUBE FLUORESCENT DISPLAY HNV-08SS44T L505 COIL R7 22 UH X4001 100GT02720 CRYSTAL B27000C005 L5901 COIL,CHOKE ACM2012H-900-2P-T L5902 COIL,CHOKE ACM2012H-900-2P-T RESISTOR L5903 COIL,CHOKE ACM2012H-900-2P-T RC................... CARBON RESISTOR L5904 COIL,CHOKE ACM2012H-900-2P-T T501 TRANSFORMER,SWITCHING 81291294 CAPACITORS

JACKS CC................... CERAMIC CAPACITOR J7301 JACK PLATE R102-D04KA(III)-06 CE................... ALUMI ELECTROLYTIC CAPACITOR J7302 RCA JACK RCA-405A-08 CP................... POLYESTER CAPACITOR J8003 RCA JACK RCA-207B-02 CPP.................. POLYPROPYLENE CAPACITOR

SWITCHES CPL.................. PLASTIC CAPACITOR SW652 SWITCH TACT EVQ11L05R CMP.................. METAL POLYESTER CAPACITOR SW653 SWITCH TACT EVQ11L05R CMPL................ METAL PLASTIC CAPACITOR SW654 SWITCH TACT EVQ11L05R CMPP................ METAL POLYPROPYLENE CAPACITOR SW655 SWITCH TACT EVQ11L05R SW656 SWITCH TACT EVQ11L05R SW657 SWITCH TACT EVQ11L05R SW658 SWITCH TACT EVQ11L05R SW659 SWITCH TACT EVQ11L05R SW660 SWITCH TACT EVQ11L05R SW661 SWITCH TACT EVQ11L05R SW662 SWITCH TACT EVQ11L05R SW663 SWITCH TACT EVQ11L05R SW664 SWITCH TACT EVQ11L05R SW665 SWITCH TACT EVQ11L05R SW666 SWITCH TACT EVQ11L05R SW667 SWITCH TACT EVQ11L05R

P.C.BOARD ASSEMBLIES PCB130 A2I918A130 DVD MT PCB ASS'Y DMF073A PCB240 A2I801A240 POWER PCB ASS'Y DPF010A PCB270 A2I918A270 OPERATION PCB ASS'Y DEF084B PCB280 A2I922A280 OPERATION 2 PCB ASS'Y DEF085B PCBDF0 A2I922ADF0 OPERATION 3 PCB ASS'Y DEF086B PCBDG0 A2I922ADG0 OPERATION 4 PCB ASS'Y DEF095B

MISCELLANEOUS B501 CORE,BEADS W4BRH3.5X6X1.0X2 B4001 CORE,BEADS MMZ1608R102CT B4002 CORE,BEADS MMZ1608R102CT B4007 CORE,BEADS MMZ1608R102CT B4010 CORE,BEADS MMZ1608R102CT B4011 CORE,BEADS MMZ1608R102CT B5902 CORE,BEADS MMZ1608R102CT B5905 CORE,BEADS MMZ1608R102CT B7304 CORE,BEADS MMZ1608R102CT B7305 CORE,BEADS MMZ1608R102CT B8004 CORE,BEADS MMZ1608R102CT BT601 BATTERY,MANGAN R6P(AR)XICI CD501 CORD,AC BUSH 9618901 CD502 06CU2E3301 CORD,CONNECTOR CU2E3301 CD601 122H0B1003 CORD,JUMPER 2H0B1003 CD602 122H091303 CORD,JUMPER 2H091303 CD604 122H051706 CORD,JUMPER 2H051706 CP501 CONNECTOR PCB SIDE A3963WV2-3PD CP502 CONNECTOR PCB SIDE A2001WV2-14P CP601 CONNECTOR PCB SIDE 00_6232_011_102_800+ CP602 CONNECTOR PCB SIDE 00_6232_009_102_800+ CP603 CONNECTOR PCB SIDE 00_6232_009_102_800+ CP604 CONNECTOR PCB SIDE 00_6232_005_102_800+ CP605 CONNECTOR PCB SIDE 00_6232_005_102_800+ CD6002 06CPBA2007 CORD,RCA PIN TD-OR0213R CD6003 CORD,RCA PIN TD-OR0201R CP2301 CONNECTOR PCB SIDE LD07T2-24ND-03 CP2302 CONNECTOR PCB SIDE 00_6232_005_006_800+ CP2303 CONNECTOR PCB SIDE 00_6232_006_006_800+ CP4002 CONNECTOR PCB SIDE 00_6232_011_006_800+ CP4003 CONNECTOR PCB SIDE A2001WV2-14P CP5901 CONNECTOR PCB SIDE 1903015-3 F501 081PC1R605 FUSE 51MS016L FH501 HOLDER,FUSE EYF-52BCY FH502 HOLDER,FUSE EYF-52BCY NR4001 R,NETWORK 4D03WGJ0330T5E NR4002 R,NETWORK 4D03WGJ0330T5E NR4003 R,NETWORK 4D03WGJ0220T5E OS651 REMOTE RECEIVER ROM-N338TAO

J3-4

IMAGINATIVE SIGHT & SOUND

R

Confirm the Regional code and Firmware version.1. Connect the TV monitor to the DV-SP404.2. Turn ON the standby switch ON. (No Disc) 3. Press "SET UP" key of remote controller (RC-616DV). Appear a HOME MENU. (Photo-1)4. Select "Initial Settings" menu and press "ENTER".5. Select "Options" menu, and press the "DISPLAY" button. 6. Appear regional code and firmware ROM number. Confirm the regional cord and firmware version. When close the menu, press "RETURN" button of the unit.

Make advanced settings

Move Select ENTERENTER Exit HOME MENU

HOME MENUDVD

Video AdjustAudio Settings

Initial Settings

Play Mode

Setup Navigator

Disc Navigator

Initial Settings

Parental LockDivX VOD

REGION 2ROM VERSION : YEB6420A

Move Select ENTER Exit HOME MENU

(Photo-1)

(Photo-2)

(Photo-2)

Digital Audio OUTVideo OutputLanguageDisplayOptions

Down load the firmware1. Newest FW is written in CD-R with a personal computer.2. Pees "Standby" button and "Disc Tray" button.3. Set the CD-R on the Disc tray and press "Play" button. Waiting 2 seconds and open the tray automatically. DISC TRAY waits for about 2 minutes in the tray open condition. Cautions: Do not close the disc tray. Close the tray automatically.4. Press "Standby" button. (Off)5. Press "Standby" button (On). Confirm the regional code and firmware version at above method.

Writing CD-R of upgraded FW.

1. Download the newest firmware. ex: YEB6704AB4DA.BIN2. Volume label name is "PIONEER"

PIONEER Firmware dataYEB6704A.BIN

Volume label

Off(us)

Most new Ver. YEB6704A

6. Set the disc on the tray and press play key.7. Open the tray (Automatically) and remove the disc and waiting about 30 second then close the tray (automatically). It is displayed in the FL tube, "NO DISC". Upgrade File DETECTED

Upgrade ?Press Play To Start

Upgrade File DETECTED

Upgrade ?Press Play To Start

UPGRADINGFile Copy

FIRMWARE DOWN LOADING

Regional codeROM Version

DV-SP404

ONKYO EUROPE UK OfficeSuite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQUNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452

ONKYO U.S.A. CORPORATION18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/

ONKYO EUROPE ELECTRONICS GmbHLiegnitzerstrasse 6, 82194 Groebenzell, GERMANYTel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPANTel: 072-831-8023 Fax: 072-831-8124

ONKYO CORPORATION

http://www.onkyo.com/HOMEPAGE

ONKYO CHINA LIMITEDUnits 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039http://www.ch.onkyo.com/

Documents

Ref. No. 3947 SERVICE MANUALSERVICE MANUAL 072006