Upload
orion-grup
View
254
Download
0
Embed Size (px)
DESCRIPTION
TEHNICE SI ARHITECTURALE
Citation preview
251
PROJECTORS Sunluce / SuniosAdjustable projectors
Museo Centrale del Risorgimento – Roma
252
Design: Nome Cognome
Varios PROJECTORS
Adjustable projector
Design: L A P D
VariosVarios is an aluminium,
track-mounted or surface-
mounted adjustable
projector; the whole
luminaire has optimum
aesthetic balance of the
volumes as a result of
keeping the control gear
and lighting body separate
to favour the best heat
dissipation.
Varios comes in two sizes
and two versions, with
vertical or “flat” control
gear.
Varios is a track-mounted
or surface-mounted
projector with manual or
power-driven and remote-
controlled adjustment.
The whole luminaire has
optimum aesthetic balance
of the volumes as a result
of keeping the control gear
and optical compartment
separate to favour the best
heat dissipation.
253
PROJECTORS VariosAdjustable projector
Corot and modern art: Souvenirs et Impressions
Verona, Italy
Palazzo della Gran Guardia,
27 November 2009 - 7 March 2010
by kind permission of the Museums of
Art and Monuments office, Municipality of Verona.
Layout by Alba Di Lieto and Nicola Brunelli
254
Varios PROJECTORS
Adjustable projector
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Two elements in die-cast aluminium,
held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90).
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED
PROJECTORS Luminaires complete with base plate
for surface mounting
DEGREE OF PROTECTION IP20/40.
SIZES: “FLAT” VERSIONS:
Ø 137 mm, protrusion of 175 mm or Ø 195 mm, protrusion of 155 mm.
VERTICAL CONTROL GEAR: Ø 95 mm, protrusion of 208 mm or Ø 95 mm, protrusion of 219 mm.
ADJUSTMENT “Flat” version: 356° in the horizontal axis; from -120° to +45° in the vertical axis.
Version with vertical control gear: 356° in the horizontal axis; from -135° to +45° in the vertical axis.
Built-in anti-glare shieldfor utmost visual comfort
255
PROJECTORS VariosAdjustable projector
POWER-DRIVEN ADJUSTMENTHorizontal 356°, vertical 135°; remote-controlled motor-driven adjustment.“Licensed technology: Remote Controlled Lighting Limited”.Smooth, precise movement, with electronic limit switch to prevent mechanical stress or overheating.
The radio frequency remote control with laser pointer (proposed as accessory) can adjust a single luminaire, selected luminaires or the entire installed series, up to a distance of 25 metres.
R e m o t eC o n t r o l
POWER-DRIVEN ADJUSTMENT
±135° in the vertical axis
356° in the horizontal axis
±135°
356°
256
Varios PROJECTORS
Adjustable projector
Varios
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For 3-circuit track
Surface-mounted version
Optics IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
IOS reflectors with Ø 80 mm (LL2 and LL7) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h..
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
For Re Led Luce 14W • Non-dimmable driver (120 or 240V AC/DC). • Non-dimmable driver (120 or 240V AC/DC).
For Re Led Luce 26W • Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.• Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off.Stand-by mode (consumption 0.3W).
For Re Led Luce 32W • Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%
For Re Led Luce 39W • Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
257
PROJECTORS VariosAdjustable projector
For IOS versions with metal halide lamps.For IOS versions with halogen lamps.
For versions with low voltage halogen lamp with built-in reflector.
99.99% pure aluminium IOS reflector with Ø 80 / 130 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics, selective filters for lighting foodstuffs or coloured dichroic filters.
Reflector incorporated in the lamp.
HF control gear for metal halide lamps with ceramic technology in a unit that is thermally independent from the optical compartment.
HF control gear for metal halide lamps with ceramic technology in a unit that is thermally independent from the optical compartment. Electronic transformer for low voltage halogen lamps in a unit that is thermally independent from the optical compartment.
Adjustable projector with IOS optics, LED LUCE and control gear technology
258The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
VariosAdjustable projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
183
ø 95
90
140
1x14W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
Version:Non-dimmable
2x 6° 0.32313.HQ 0.32313.WW 0.32313.NN
2x 8° 0.32312.HQ 0.32312.WW 0.32312.NN
2x11° 0.32314.HQ 0.32314.WW 0.32314.NN
2x15° 0.32315.HQ 0.32315.WW 0.32315.NN
2x26° 0.32316.HQ 0.32316.WW 0.32316.NN
W. W. Mira 0.32317.HQ 0.32317.WW 0.32317.NN
Surface-mounted version
183
ø 95
140
90
Version:Non-dimmable
2x 6° 0.32330.HQ 0.32330.WW 0.32330.NN
2x 8° 0.32328.HQ 0.32328.WW 0.32328.NN
2x11° 0.32331.HQ 0.32331.WW 0.32331.NN
2x15° 0.32332.HQ 0.32332.WW 0.32332.NN
2x26° 0.32333.HQ 0.32333.WW 0.32333.NN
W. W. Mira 0.32334.HQ 0.32334.WW 0.32334.NN
For 3-circuit track
133200
183
ø 95
90
Version:Non-dimmable
2x 6° 0.32250.HQ 0.32250.WW 0.32250.NN
2x 8° 0.32249.HQ 0.32249.WW 0.32249.NN
2x11° 0.32251.HQ 0.32251.WW 0.32251.NN
2x15° 0.32252.HQ 0.32252.WW 0.32252.NN
2x26° 0.32253.HQ 0.32253.WW 0.32253.NN
W. W. Mira 0.32254.HQ 0.32254.WW 0.32254.NN
Surface-mounted version
ø 95
200 133155
90183
Version:Non-dimmable
2x 6° 0.32320.HQ 0.32320.WW 0.32320.NN
2x 8° 0.32318.HQ 0.32318.WW 0.32318.NN
2x11° 0.32321.HQ 0.32321.WW 0.32321.NN
2x15° 0.32322.HQ 0.32322.WW 0.32322.NN
2x26° 0.32323.HQ 0.32323.WW 0.32323.NN
W. W. Mira 0.32324.HQ 0.32324.WW 0.32324.NN
259Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
Varios with power-driven adjustmentProjector with power-driven adjustment, IOS optics, LED LUCE and control gear technology
For 3-circuit track
143210
224
ø 95
1311x14W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
Version:Non-dimmable
2x 6° 0.32466.HQ 0.32466.WW 0.32466.NN
2x 8° 0.32464.HQ 0.32464.WW 0.32464.NN
2x11° 0.32467.HQ 0.32467.WW 0.32467.NN
2x15° 0.32468.HQ 0.32468.WW 0.32468.NN
2x26° 0.32469.HQ 0.32469.WW 0.32469.NN
W. W. Mira 0.32470.HQ 0.32470.WW 0.32470.NN
Surface-mounted version
ø 95
210 165
131224
Version:Non-dimmable
2x 6° 0.32481.HQ 0.32481.WW 0.32481.NN
2x 8° 0.32479.HQ 0.32479.WW 0.32479.NN
2x11° 0.32482.HQ 0.32482.WW 0.32482.NN
2x15° 0.32483.HQ 0.32483.WW 0.32483.NN
2x26° 0.32484.HQ 0.32484.WW 0.32484.NN
W. W. Mira 0.32485.HQ 0.32485.WW 0.32485.NN
260The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
Varios Adjustable projector with IOS optics, LED LUCE and control gear technology arranged horizontally (“FLAT” version)
For 3-circuit track
ø 137
160
20490
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32410.HQ 0.32410.WW 0.32410.NN 0.33251.HQ 0.33251.WW 0.33251.NN
2x 8° 0.32408.HQ 0.32408.WW 0.32408.NN 0.33252.HQ 0.33252.WW 0.33252.NN
2x11° 0.32411.HQ 0.32411.WW 0.32411.NN 0.33253.HQ 0.33253.WW 0.33253.NN
2x15° 0.32412.HQ 0.32412.WW 0.32412.NN 0.33254.HQ 0.33254.WW 0.33254.NN
2x26° 0.32413.HQ 0.32413.WW 0.32413.NN 0.33255.HQ 0.33255.WW 0.33255.NN
W. W. Mira 0.32414.HQ 0.32414.WW 0.32414.NN 0.33256.HQ 0.33256.WW 0.33256.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 33251.HQ V. 33251.WW V. 33251.NN
2x 8° V. 33252.HQ V. 33252.WW V. 33252.NN
2x11° V. 33253.HQ V. 33253.WW V. 33253.NN
2x15° V. 33254.HQ V. 33254.WW V. 33254.NN
2x26° V. 33255.HQ V. 33255.WW V. 33255.NN
W. W. Mira V. 33256.HQ V. 33256.WW V. 33256.NN
Version:DALI dimming *
2x 6° D.33251.HQ D.33251.WW D.33251.NN
2x 8° D.33252.HQ D.33252.WW D.33252.NN
2x11° D.33253.HQ D.33253.WW D.33253.NN
2x15° D.33254.HQ D.33254.WW D.33254.NN
2x26° D.33255.HQ D.33255.WW D.33255.NN
W. W. Mira D.33256.HQ D.33256.WW D.33256.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
Surface-mounted version
ø 137
160
20490
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32420.HQ 0.32420.WW 0.32420.NN 0.33261.HQ 0.33261.WW 0.33261.NN
2x 8° 0.32418.HQ 0.32418.WW 0.32418.NN 0.33262.HQ 0.33262.WW 0.33262.NN
2x11° 0.32421.HQ 0.32421.WW 0.32421.NN 0.33263.HQ 0.33263.WW 0.33263.NN
2x15° 0.32422.HQ 0.32422.WW 0.32422.NN 0.33264.HQ 0.33264.WW 0.33264.NN
2x26° 0.32423.HQ 0.32423.WW 0.32423.NN 0.33265.HQ 0.33265.WW 0.33265.NN
W. W. Mira 0.32424.HQ 0.32424.WW 0.32424.NN 0.33266.HQ 0.33266.WW 0.33266.NN
Version:Dimmable (1-10V DC)
2x 6° V. 33261.HQ V. 33261.WW V. 33261.NN
2x 8° V. 33262.HQ V. 33262.WW V. 33262.NN
2x11° V. 33263.HQ V. 33263.WW V. 33263.NN
2x15° V. 33264.HQ V. 33264.WW V. 33264.NN
2x26° V. 33265.HQ V. 33265.WW V. 33265.NN
W. W. Mira V. 33266.HQ V. 33266.WW V. 33266.NN
Version:DALI dimming
2x 6° D.33261.HQ D.33261.WW D.33261.NN
2x 8° D.33262.HQ D.33262.WW D.33262.NN
2x11° D.33263.HQ D.33263.WW D.33263.NN
2x15° D.33264.HQ D.33264.WW D.33264.NN
2x26° D.33265.HQ D.33265.WW D.33265.NN
W. W. Mira D.33266.HQ D.33266.WW D.33266.NN
261Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
7
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.33391.HQ 0.33391.WW 0.33391.NN 2x11° 0.33281.HQ 0.33281.WW 0.33281.NN
2x 8° 0.33392.HQ 0.33392.WW 0.33392.NN 2x15° 0.33282.HQ 0.33282.WW 0.33282.NN
2x11° 0.33393.HQ 0.33393.WW 0.33393.NN 2x18° 0.33283.HQ 0.33283.WW 0.33283.NN
2x15° 0.33394.HQ 0.33394.WW 0.33394.NN 2x20° 0.33284.HQ 0.33284.WW 0.33284.NN
2x26° 0.33395.HQ 0.33395.WW 0.33395.NN 2x34° 0.33285.HQ 0.33285.WW 0.33285.NN
W. W. Mira 0.33396.HQ 0.33396.WW 0.33396.NN
2x 6° V. 33391.HQ V. 33391.WW V. 33391.NN 2x11° V. 33281.HQ V. 33281.WW V. 33281.NN
2x 8° V. 33392.HQ V. 33392.WW V. 33392.NN 2x15° V. 33282.HQ V. 33282.WW V. 33282.NN
2x11° V. 33393.HQ V. 33393.WW V. 33393.NN 2x18° V. 33283.HQ V. 33283.WW V. 33283.NN
2x15° V. 33394.HQ V. 33394.WW V. 33394.NN 2x20° V. 33284.HQ V. 33284.WW V. 33284.NN
2x26° V. 33395.HQ V. 33395.WW V. 33395.NN 2x34° V. 33285.HQ V. 33285.WW V. 33285.NN
W. W. Mira V. 33396.HQ V. 33396.WW V. 33396.NN
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.32336.HQ 0.32336.WW 0.32336.NN 2x11° 0.33291.HQ 0.33291.WW 0.33291.NN
2x 8° 0.32337.HQ 0.32337.WW 0.32337.NN 2x15° 0.33292.HQ 0.33292.WW 0.33292.NN
2x11° 0.32338.HQ 0.32338.WW 0.32338.NN 2x18° 0.33293.HQ 0.33293.WW 0.33293.NN
2x15° 0.32339.HQ 0.32339.WW 0.32339.NN 2x20° 0.33294.HQ 0.33294.WW 0.33294.NN
2x26° 0.32340.HQ 0.32340.WW 0.32340.NN 2x34° 0.33295.HQ 0.33295.WW 0.33295.NN
W. W. Mira 0.32341.HQ 0.32341.WW 0.32341.NN
2x 6° V. 32336.HQ V. 32336.WW V. 32336.NN 2x11° V. 33291.HQ V. 33291.WW V. 33291.NN
2x 8° V. 32337.HQ V. 32337.WW V. 32337.NN 2x15° V. 33292.HQ V. 33292.WW V. 33292.NN
2x11° V. 32338.HQ V. 32338.WW V. 32338.NN 2x18° V. 33293.HQ V. 33293.WW V. 33293.NN
2x15° V. 32339.HQ V. 32339.WW V. 32339.NN 2x20° V. 33294.HQ V. 33294.WW V. 33294.NN
2x26° V. 32340.HQ V. 32340.WW V. 32340.NN 2x34° V. 33295.HQ V. 33295.WW V. 33295.NN
W. W. Mira V. 32341.HQ V. 32341.WW V. 32341.NN
262The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
Varios Adjustable projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track with control gear technology arranged vertically
133214
204
ø 137
901x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32370.HQ 0.32370.WW 0.32370.NN 0.33311.HQ 0.33311.WW 0.33311.NN
2x 8° 0.32368.HQ 0.32368.WW 0.32368.NN 0.33312.HQ 0.33312.WW 0.33312.NN
2x11° 0.32371.HQ 0.32371.WW 0.32371.NN 0.33313.HQ 0.33313.WW 0.33313.NN
2x15° 0.32372.HQ 0.32372.WW 0.32372.NN 0.33314.HQ 0.33314.WW 0.33314.NN
2x26° 0.32373.HQ 0.32373.WW 0.32373.NN 0.33315.HQ 0.33315.WW 0.33315.NN
W. W. Mira 0.32374.HQ 0.32374.WW 0.32374.NN 0.33316.HQ 0.33316.WW 0.33316.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 33311.HQ V. 33311.WW V. 33311.NN
2x 8° V. 33312.HQ V. 33312.WW V. 33312.NN
2x11° V. 33313.HQ V. 33313.WW V. 33313.NN
2x15° V. 33314.HQ V. 33314.WW V. 33314.NN
2x26° V. 33315.HQ V. 33315.WW V. 33315.NN
W. W. Mira V. 33316.HQ V. 33316.WW V. 33316.NN
Version:DALI dimming *
2x 6° D.33311.HQ D.33311.WW D.33311.NN
2x 8° D.33312.HQ D.33312.WW D.33312.NN
2x11° D.33313.HQ D.33313.WW D.33313.NN
2x15° D.33314.HQ D.33314.WW D.33314.NN
2x26° D.33315.HQ D.33315.WW D.33315.NN
W. W. Mira D.33316.HQ D.33316.WW D.33316.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
For 3-circuit track with control gear technology arranged vertically
133155
214
ø 137
90204
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32440.HQ 0.32440.WW 0.32440.NN 0.33321.HQ 0.33321.WW 0.33321.NN
2x 8° 0.32438.HQ 0.32438.WW 0.32438.NN 0.33322.HQ 0.33322.WW 0.33322.NN
2x11° 0.32441.HQ 0.32441.WW 0.32441.NN 0.33323.HQ 0.33323.WW 0.33323.NN
2x15° 0.32442.HQ 0.32442.WW 0.32442.NN 0.33324.HQ 0.33324.WW 0.33324.NN
2x26° 0.32443.HQ 0.32443.WW 0.32443.NN 0.33325.HQ 0.33325.WW 0.33325.NN
W. W. Mira 0.32444.HQ 0.32444.WW 0.32444.NN 0.33326.HQ 0.33326.WW 0.33326.NN
Version:Dimmable (1-10V DC)
2x 6° V. 33321.HQ V. 33321.WW V. 33321.NN
2x 8° V. 33322.HQ V. 33322.WW V. 33322.NN
2x11° V. 33323.HQ V. 33323.WW V. 33323.NN
2x15° V. 33324.HQ V. 33324.WW V. 33324.NN
2x26° V. 33325.HQ V. 33325.WW V. 33325.NN
W. W. Mira V. 33326.HQ V. 33326.WW V. 33326.NN
Version:DALI dimming
2x 6° D.33321.HQ D.33321.WW D.33321.NN
2x 8° D.33322.HQ D.33322.WW D.33322.NN
2x11° D.33323.HQ D.33323.WW D.33323.NN
2x15° D.33324.HQ D.33324.WW D.33324.NN
2x26° D.33325.HQ D.33325.WW D.33325.NN
W. W. Mira D.33326.HQ D.33326.WW D.33326.NN
263Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
7
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.33301.HQ 0.33301.WW 0.33301.NN 2x11° 0.33341.HQ 0.33341.WW 0.33341.NN
2x 8° 0.33302.HQ 0.33302.WW 0.33302.NN 2x15° 0.33342.HQ 0.33342.WW 0.33342.NN
2x11° 0.33303.HQ 0.33303.WW 0.33303.NN 2x18° 0.33343.HQ 0.33343.WW 0.33343.NN
2x15° 0.33304.HQ 0.33304.WW 0.33304.NN 2x20° 0.33344.HQ 0.33344.WW 0.33344.NN
2x26° 0.33305.HQ 0.33305.WW 0.33305.NN 2x34° 0.33345.HQ 0.33345.WW 0.33345.NN
W. W. Mira 0.33306.HQ 0.33306.WW 0.33306.NN
2x 6° V. 33301.HQ V. 33301.WW V. 33301.NN 2x11° V. 33341.HQ V. 33341.WW V. 33341.NN
2x 8° V. 33302.HQ V. 33302.WW V. 33302.NN 2x15° V. 33342.HQ V. 33342.WW V. 33342.NN
2x11° V. 33303.HQ V. 33303.WW V. 33303.NN 2x18° V. 33343.HQ V. 33343.WW V. 33343.NN
2x15° V. 33304.HQ V. 33304.WW V. 33304.NN 2x20° V. 33344.HQ V. 33344.WW V. 33344.NN
2x26° V. 33305.HQ V. 33305.WW V. 33305.NN 2x34° V. 33345.HQ V. 33345.WW V. 33345.NN
W. W. Mira V. 33306.HQ V. 33306.WW V. 33306.NN
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.33331.HQ 0.33331.WW 0.33331.NN 2x11° 0.33351.HQ 0.33351.WW 0.33351.NN
2x 8° 0.33332.HQ 0.33332.WW 0.33332.NN 2x15° 0.33352.HQ 0.33352.WW 0.33352.NN
2x11° 0.33333.HQ 0.33333.WW 0.33333.NN 2x18° 0.33353.HQ 0.33353.WW 0.33353.NN
2x15° 0.33334.HQ 0.33334.WW 0.33334.NN 2x20° 0.33354.HQ 0.33354.WW 0.33354.NN
2x26° 0.33335.HQ 0.33335.WW 0.33335.NN 2x34° 0.33355.HQ 0.33355.WW 0.33355.NN
W. W. Mira 0.33336.HQ 0.33336.WW 0.33336.NN
2x 6° V. 33331.HQ V. 33331.WW V. 33331.NN 2x11° V. 33351.HQ V. 33351.WW V. 33351.NN
2x 8° V. 33332.HQ V. 33332.WW V. 33332.NN 2x15° V. 33352.HQ V. 33352.WW V. 33352.NN
2x11° V. 33333.HQ V. 33333.WW V. 33333.NN 2x18° V. 33353.HQ V. 33353.WW V. 33353.NN
2x15° V. 33334.HQ V. 33334.WW V. 33334.NN 2x20° V. 33354.HQ V. 33354.WW V. 33354.NN
2x26° V. 33335.HQ V. 33335.WW V. 33335.NN 2x34° V. 33355.HQ V. 33355.WW V. 33355.NN
W. W. Mira V. 33336.HQ V. 33336.WW V. 33336.NN
264The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
Varios with power-driven adjustmentProjector with power-driven adjustment, IOS optics, LED LUCE and control gear technology
For 3-circuit track with control gear technology arranged vertically
143221
245
ø 137
1311x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32511.HQ 0.32511.WW 0.32511.NN 0.32546.HQ 0.32546.WW 0.32546.NN
2x 8° 0.32509.HQ 0.32509.WW 0.32509.NN 0.32547.HQ 0.32547.WW 0.32547.NN
2x11° 0.32512.HQ 0.32512.WW 0.32512.NN 0.32548.HQ 0.32548.WW 0.32548.NN
2x15° 0.32513.HQ 0.32513.WW 0.32513.NN 0.32549.HQ 0.32549.WW 0.32549.NN
2x26° 0.32514.HQ 0.32514.WW 0.32514.NN 0.32550.HQ 0.32550.WW 0.32550.NN
W. W. Mira 0.32515.HQ 0.32515.WW 0.32515.NN 0.32551.HQ 0.32551.WW 0.32551.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 32546.HQ V. 32546.WW V. 32546.NN
2x 8° V. 32547.HQ V. 32547.WW V. 32547.NN
2x11° V. 32548.HQ V. 32548.WW V. 32548.NN
2x15° V. 32549.HQ V. 32549.WW V. 32549.NN
2x26° V. 32550.HQ V. 32550.WW V. 32550.NN
W. W. Mira V. 32551.HQ V. 32551.WW V. 32551.NN
Version:DALI dimming *
2x 6° D.32546.HQ D.32546.WW D.32546.NN
2x 8° D.32547.HQ D.32547.WW D.32547.NN
2x11° D.32548.HQ D.32548.WW D.32548.NN
2x15° D.32549.HQ D.32549.WW D.32549.NN
2x26° D.32550.HQ D.32550.WW D.32550.NN
W. W. Mira D.32551.HQ D.32551.WW D.32551.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
For 3-circuit track with control gear technology arranged vertically
165221
ø 137
131245
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32526.HQ 0.32526.WW 0.32526.NN 0.32536.HQ 0.32536.WW 0.32536.NN
2x 8° 0.32524.HQ 0.32524.WW 0.32524.NN 0.32537.HQ 0.32537.WW 0.32537.NN
2x11° 0.32527.HQ 0.32527.WW 0.32527.NN 0.32538.HQ 0.32538.WW 0.32538.NN
2x15° 0.32528.HQ 0.32528.WW 0.32528.NN 0.32539.HQ 0.32539.WW 0.32539.NN
2x26° 0.32529.HQ 0.32529.WW 0.32529.NN 0.32540.HQ 0.32540.WW 0.32540.NN
W. W. Mira 0.32530.HQ 0.32530.WW 0.32530.NN 0.32541.HQ 0.32541.WW 0.32541.NN
Version:Dimmable (1-10V DC)
2x 6° V. 32536.HQ V. 32536.WW V. 32536.NN
2x 8° V. 32537.HQ V. 32537.WW V. 32537.NN
2x11° V. 32538.HQ V. 32538.WW V. 32538.NN
2x15° V. 32539.HQ V. 32539.WW V. 32539.NN
2x26° V. 32540.HQ V. 32540.WW V. 32540.NN
W. W. Mira V. 32541.HQ V. 32541.WW V. 32541.NN
Version:DALI dimming
2x 6° D.32536.HQ D.32536.WW D.32536.NN
2x 8° D.32537.HQ D.32537.WW D.32537.NN
2x11° D.32538.HQ D.32538.WW D.32538.NN
2x15° D.32539.HQ D.32539.WW D.32539.NN
2x26° D.32540.HQ D.32540.WW D.32540.NN
W. W. Mira D.32541.HQ D.32541.WW D.32541.NN
265Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
7
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.32582.HQ 0.32582.WW 0.32582.NN 2x11° 0.32571.HQ 0.32571.WW 0.32571.NN
2x 8° 0.32583.HQ 0.32583.WW 0.32583.NN 2x15° 0.32572.HQ 0.32572.WW 0.32572.NN
2x11° 0.32584.HQ 0.32584.WW 0.32584.NN 2x18° 0.32573.HQ 0.32573.WW 0.32573.NN
2x15° 0.32585.HQ 0.32585.WW 0.32585.NN 2x20° 0.32574.HQ 0.32574.WW 0.32574.NN
2x26° 0.32586.HQ 0.32586.WW 0.32586.NN 2x34° 0.32575.HQ 0.32575.WW 0.32575.NN
W. W. Mira 0.32587.HQ 0.32587.WW 0.32587.NN
2x 6° V. 32582.HQ V. 32582.WW V. 32582.NN 2x11° V. 32571.HQ V. 32571.WW V. 32571.NN
2x 8° V. 32583.HQ V. 32583.WW V. 32583.NN 2x15° V. 32572.HQ V. 32572.WW V. 32572.NN
2x11° V. 32584.HQ V. 32584.WW V. 32584.NN 2x18° V. 32573.HQ V. 32573.WW V. 32573.NN
2x15° V. 32585.HQ V. 32585.WW V. 32585.NN 2x20° V. 32574.HQ V. 32574.WW V. 32574.NN
2x26° V. 32586.HQ V. 32586.WW V. 32586.NN 2x34° V. 32575.HQ V. 32575.WW V. 32575.NN
W. W. Mira V. 32587.HQ V. 32587.WW V. 32587.NN
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.32576.HQ 0.32576.WW 0.32576.NN 2x11° 0.32561.HQ 0.32561.WW 0.32561.NN
2x 8° 0.32577.HQ 0.32577.WW 0.32577.NN 2x15° 0.32562.HQ 0.32562.WW 0.32562.NN
2x11° 0.32578.HQ 0.32578.WW 0.32578.NN 2x18° 0.32563.HQ 0.32563.WW 0.32563.NN
2x15° 0.32579.HQ 0.32579.WW 0.32579.NN 2x20° 0.32564.HQ 0.32564.WW 0.32564.NN
2x26° 0.32580.HQ 0.32580.WW 0.32580.NN 2x34° 0.32565.HQ 0.32565.WW 0.32565.NN
W. W. Mira 0.32581.HQ 0.32581.WW 0.32581.NN
2x 6° V. 32576.HQ V. 32576.WW V. 32576.NN 2x11° V. 32561.HQ V. 32561.WW V. 32561.NN
2x 8° V. 32577.HQ V. 32577.WW V. 32577.NN 2x15° V. 32562.HQ V. 32562.WW V. 32562.NN
2x11° V. 32578.HQ V. 32578.WW V. 32578.NN 2x18° V. 32563.HQ V. 32563.WW V. 32563.NN
2x15° V. 32579.HQ V. 32579.WW V. 32579.NN 2x20° V. 32564.HQ V. 32564.WW V. 32564.NN
2x26° V. 32580.HQ V. 32580.WW V. 32580.NN 2x34° V. 32565.HQ V. 32565.WW V. 32565.NN
W. W. Mira V. 32581.HQ V. 32581.WW V. 32581.NN
266The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
Varios Adjustable projector with IOS optics and control gear technology for metal halide lamps.
For 3-circuit track
183
ø 95
90
140
CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt
2x 6°/ 7° 0.19635.00 0.19640.00 0.50120.00 0.19645.00
2x12°/11°/12° 0.19636.00 0.19641.00 0.50121.00 0.19646.00
2x37°/39° 0.19637.00 0.19642.00 0.50122.00 0.19647.00
W. W. Mira 0.19638.00 0.19643.00 0.50123.00 0.19648.00
Surface-mounted version
183
ø 95
140
902x 6°/ 7° 0.19821.00 0.19826.00 0.50124.00 0.19831.00
2x12°/11°/12° 0.19822.00 0.19827.00 0.50125.00 0.19832.00
2x37°/39° 0.19823.00 0.19828.00 0.50126.00 0.19833.00
W. W. Mira 0.19824.00 0.19829.00 0.50127.00 0.19834.00
For 3-circuit track
133200
183
ø 95
902x 6°/ 7° 0.19510.00 0.19515.00 0.50128.00 0.19520.00
2x12°/11°/12° 0.19511.00 0.19516.00 0.50129.00 0.19521.00
2x37°/39° 0.19512.00 0.19517.00 0.50130.00 0.19522.00
W. W. Mira 0.19513.00 0.19518.00 0.50131.00 0.19523.00
Surface-mounted version
ø 95
200 133155
90183
2x 6°/ 7° 0.19802.00 0.19807.00 0.50132.00 0.19812.00
2x12°/11°/12° 0.19803.00 0.19808.00 0.50133.00 0.19813.00
2x37°/39° 0.19804.00 0.19809.00 0.50134.00 0.19814.00
W. W. Mira 0.19805.00 0.19810.00 0.50135.00 0.19815.00
For 3-circuit track (power-driven adjustment)
143210
224
ø 95
1312x 6°/ 7° 0.20110.00 0.20116.00 0.50136.00 0.20122.00
2x12°/11°/12° 0.20111.00 0.20117.00 0.50137.00 0.20123.00
2x37°/39° 0.20112.00 0.20118.00 0.50138.00 0.20124.00
W. W. Mira 0.20113.00 0.20119.00 0.50139.00 0.20125.00
Surface-mounted version (power-driven adjustment)
ø 95
210 165
131224
2x 6°/ 7° 0.20180.00 0.20186.00 0.50140.00 0.20192.00
2x12°/11°/12° 0.20181.00 0.20187.00 0.50141.00 0.20193.00
2x37°/39° 0.20182.00 0.20188.00 0.50142.00 0.20194.00
W. W. Mira 0.20183.00 0.20189.00 0.50143.00 0.20195.00
267Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
Varios Adjustable projector with IOS optics and control gear technology for metal halide lamps and halogen lamps.
For 3-circuit track
ø 137
160
20490
CDM-T / G12 QT-14 / G9
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x60 Watt
2x 7° / 8° 0.19650.00 0.19655.00 0.50144.00 0.19660.00 0.19665.00
2x11° 0.19651.00 0.19656.00 0.50145.00 0.19661.00 0.19666.00
2x14° 0.19544.00 0.19545.00 0.50146.00 0.19546.00 0.19547.00
2x25° 0.19652.00 0.19657.00 0.50147.00 0.19662.00 0.19667.00
W. W. Mira 0.19653.00 0.19658.00 0.50148.00 0.19663.00 0.19668.00
Surface-mounted version
ø 137
160
20490
2x 7° / 8° 0.19876.00 0.19881.00 0.50149.00 0.19886.00 0.20001.00
2x11° 0.19877.00 0.19882.00 0.50150.00 0.19887.00 0.20002.00
2x14° 0.19890.00 0.19891.00 0.50151.00 0.19892.00 0.20005.00
2x25° 0.19878.00 0.19883.00 0.50152.00 0.19888.00 0.20003.00
W. W. Mira 0.19879.00 0.19884.00 0.50153.00 0.19889.00 0.20004.00
For 3-circuit track
133204
204
ø 137
902x 7° / 8° 0.19550.00 0.19555.00 0.50154.00 0.19560.00 0.19565.00
2x11° 0.19551.00 0.19556.00 0.50155.00 0.19561.00 0.19566.00
2x14° 0.19540.00 0.19541.00 0.50156.00 0.19542.00 0.19543.00
2x25° 0.19552.00 0.19557.00 0.50157.00 0.19562.00 0.19567.00
W. W. Mira 0.19553.00 0.19558.00 0.50158.00 0.19563.00 0.19568.00
Surface-mounted version
133155
214
ø 137
90204 2x 7° / 8° 0.19856.00 0.19861.00 0.50159.00 0.19866.00 0.19996.00
2x11° 0.19857.00 0.19862.00 0.50160.00 0.19867.00 0.19997.00
2x14° 0.19870.00 0.19871.00 0.50161.00 0.19872.00 0.19994.00
2x25° 0.19858.00 0.19863.00 0.50162.00 0.19868.00 0.19998.00
W. W. Mira 0.19859.00 0.19864.00 0.50163.00 0.19869.00 0.19999.00
268The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Varios PROJECTORS
Adjustable projector
Varios with power-driven adjustmentAdjustable projector with IOS optics and control gear technology for metal halide lamps and halogen lamps.
For 3-circuit track
143221
245
ø 137
131CDM-T / G12 QT-14 / G9
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x60 Watt
2x 7° / 8° 0.20140.00 0.20146.00 0.50164.00 0.20152.00 0.20160.00
2x11° 0.20141.00 0.20147.00 0.50165.00 0.20153.00 0.20161.00
2x14° 0.20144.00 0.20150.00 0.50166.00 0.20156.00 0.20164.00
2x25° 0.20142.00 0.20148.00 0.50167.00 0.20154.00 0.20162.00
W. W. Mira 0.20143.00 0.20149.00 0.50168.00 0.20155.00 0.20163.00
Surface-mounted version
165221
ø 137
131245 2x 7° / 8° 0.20220.00 0.20226.00 0.50169.00 0.20232.00 0.20250.00
2x11° 0.20221.00 0.20227.00 0.50170.00 0.20233.00 0.20251.00
2x14° 0.20224.00 0.20230.00 0.50171.00 0.20236.00 0.20254.00
2x25° 0.20222.00 0.20228.00 0.50172.00 0.20234.00 0.20252.00
W. W. Mira 0.20223.00 0.20229.00 0.50173.00 0.20235.00 0.20253.00
269Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS VariosAdjustable projector
Varios Adjustable projector with control gear technology for low voltage halogen lamps
For 3-circuit track
ø 137
160
20490
QR-111 / G53
1x65 Watt - 12V
of the lamp 0.19670.00
Surface-mounted version
ø 137
160
20490
of the lamp 0.20016.00
For 3-circuit track
133204
204
ø 137
90of the lamp 0.19570.00
Surface-mounted version
133155
214
ø 137
90204 of the lamp 0.20010.00
For 3-circuit track (power-driven adjustment)
143221
245
ø 137
131 of the lamp 0.20168.00
Surface-mounted version (power-driven adjustment)
165221
ø 137
131245 of the lamp 0.20258.00
270
Design: Nome Cognome
Trisio Plus / Trisio PROJECTORS
Adjustable projectors
Wallis, One New Change - London,
Great Britain
Design: Fabio Reggiani
Trisio Plus / TrisioMinimal, compact design
combined with high
efficiency light sources –
these are the innovative
features in this new version
of Trisio Plus, interior
adjustable projector, which
comes in three versions:
pendant, surface mounted
and track mounted.
The optical compartment
can be adjusted to the
desired position using the
friction joint that can also be
fixed in place with the screw
lock. A streamlined rigid
aluminium rod is used in the
pendant version, showing up
its already
eye-catching design.
271
PROJECTORS Trisio Plus / TrisioAdjustable projectors
Diesel - Washington, USA
272
Trisio Plus / Trisio PROJECTORS
Adjustable projectors
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Two harmonious elements in die-cast
aluminium, held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90)
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for
mounting on Reggiani 3-circuit track. (The compatibility of the adapter with
the various 3-circuit tracks available on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED PROJECTORS
Built-in anti-glare shield for utmost visual comfort.
Possibility of power supply cable access from the side in surface-mounted projectors.
ADJUSTMENT
90° in the vertical axis. Adjustment with friction device and screw lock.
356° in the horizontal axis
90°
356°
273
PROJECTORS Trisio Plus / TrisioAdjustable projectors
Trisio PlusTrisio
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For IOS versions with metal halide lamps.For IOS versions with halogen lamps.
For versions with low voltage halogen lamp with built-in reflector.
Optics IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
99.99% pure aluminium IOS reflector with Ø 80 / 130 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version).There are also versions with gold optics, selective filters for lighting foodstuffs or coloured dichroic filters.
Lamps with built-in reflector.
Control gear technologies
High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
HF control gear for metal halide lamps with ceramic technology in a unit that is thermally independent from the optical compartment.Electronic transformer for low voltage halogen lamps in a unit that is thermally independent from the optical compartment.
Electronic transformer for low voltage halogen lamps in a unit that is thermally independent from the optical compartment.
For Re Led Luce 14W
• Non-dimmable driver (120 or 240V AC/DC).
For Re Led Luce 26W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.• Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off.Stand-by mode (consumption 0.3W).
274The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Trisio Plus / Trisio PROJECTORS
Adjustable projectors
Trisio Plus Adjustable projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
215
ø100
145x85 1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32861.HQ 0.32861.WW 0.32861.NN 0.32901.HQ 0.32901.WW 0.32901.NN
2x 8° 0.32862.HQ 0.32862.WW 0.32862.NN 0.32902.HQ 0.32902.WW 0.32902.NN
2x11° 0.32863.HQ 0.32863.WW 0.32863.NN 0.32903.HQ 0.32903.WW 0.32903.NN
2x15° 0.32864.HQ 0.32864.WW 0.32864.NN 0.32904.HQ 0.32904.WW 0.32904.NN
2x26° 0.32865.HQ 0.32865.WW 0.32865.NN 0.32905.HQ 0.32905.WW 0.32905.NN
W. W. Mira 0.32866.HQ 0.32866.WW 0.32866.NN 0.32906.HQ 0.32906.WW 0.32906.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 32901.HQ V. 32901.WW V. 32901.NN
2x 8° V. 32902.HQ V. 32902.WW V. 32902.NN
2x11° V. 32903.HQ V. 32903.WW V. 32903.NN
2x15° V. 32904.HQ V. 32904.WW V. 32904.NN
2x26° V. 32905.HQ V. 32905.WW V. 32905.NN
W. W. Mira V. 32906.HQ V. 32906.WW V. 32906.NN
Version:DALI dimming *
2x 6° D.32901.HQ D.32901.WW D.32901.NN
2x 8° D.32902.HQ D.32902.WW D.32902.NN
2x11° D.32903.HQ D.32903.WW D.32903.NN
2x15° D.32904.HQ D.32904.WW D.32904.NN
2x26° D.32905.HQ D.32905.WW D.32905.NN
W. W. Mira D.32906.HQ D.32906.WW D.32906.NN
Pendant mounted on 3-circuit track
1000
145x85
ø100
Version:Non-dimmable
2x 6° 0.32871.HQ 0.32871.WW 0.32871.NN 0.32911.HQ 0.32911.WW 0.32911.NN
2x 8° 0.32872.HQ 0.32872.WW 0.32872.NN 0.32912.HQ 0.32912.WW 0.32912.NN
2x11° 0.32873.HQ 0.32873.WW 0.32873.NN 0.32913.HQ 0.32913.WW 0.32913.NN
2x15° 0.32874.HQ 0.32874.WW 0.32874.NN 0.32914.HQ 0.32914.WW 0.32914.NN
2x26° 0.32875.HQ 0.32875.WW 0.32875.NN 0.32915.HQ 0.32915.WW 0.32915.NN
W. W. Mira 0.32876.HQ 0.32876.WW 0.32876.NN 0.32916.HQ 0.32916.WW 0.32916.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 32911.HQ V. 32911.WW V. 32911.NN
2x 8° V. 32912.HQ V. 32912.WW V. 32912.NN
2x11° V. 32913.HQ V. 32913.WW V. 32913.NN
2x15° V. 32914.HQ V. 32914.WW V. 32914.NN
2x26° V. 32915.HQ V. 32915.WW V. 32915.NN
W. W. Mira V. 32916.HQ V. 32916.WW V. 32916.NN
Version:DALI dimming *
2x 6° D.32911.HQ D.32911.WW D.32911.NN
2x 8° D.32912.HQ D.32912.WW D.32912.NN
2x11° D.32913.HQ D.32913.WW D.32913.NN
2x15° D.32914.HQ D.32914.WW D.32914.NN
2x26° D.32915.HQ D.32915.WW D.32915.NN
W. W. Mira D.32916.HQ D.32916.WW D.32916.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
275Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS Trisio Plus / TrisioAdjustable projectors
Trisio Plus Adjustable projector with IOS optics, LED LUCE and control gear technology
Surface mounted
211
ø 156
ø100
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.32851.HQ 0.32851.WW 0.32851.NN 0.32891.HQ 0.32891.WW 0.32891.NN
2x 8° 0.32852.HQ 0.32852.WW 0.32852.NN 0.32892.HQ 0.32892.WW 0.32892.NN
2x11° 0.32853.HQ 0.32853.WW 0.32853.NN 0.32893.HQ 0.32893.WW 0.32893.NN
2x15° 0.32854.HQ 0.32854.WW 0.32854.NN 0.32894.HQ 0.32894.WW 0.32894.NN
2x26° 0.32855.HQ 0.32855.WW 0.32855.NN 0.32895.HQ 0.32895.WW 0.32895.NN
W. W. Mira 0.32856.HQ 0.32856.WW 0.32856.NN 0.32896.HQ 0.32896.WW 0.32896.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 32891.HQ V. 32891.WW V. 32891.NN
2x 8° V. 32892.HQ V. 32892.WW V. 32892.NN
2x11° V. 32893.HQ V. 32893.WW V. 32893.NN
2x15° V. 32894.HQ V. 32894.WW V. 32894.NN
2x26° V. 32895.HQ V. 32895.WW V. 32895.NN
W. W. Mira V. 32896.HQ V. 32896.WW V. 32896.NN
Version:DALI dimming *
2x 6° D.32891.HQ D.32891.WW D.32891.NN
2x 8° D.32892.HQ D.32892.WW D.32892.NN
2x11° D.32893.HQ D.32893.WW D.32893.NN
2x15° D.32894.HQ D.32894.WW D.32894.NN
2x26° D.32895.HQ D.32895.WW D.32895.NN
W. W. Mira D.32896.HQ D.32896.WW D.32896.NN
276The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Trisio Plus / Trisio PROJECTORS
Adjustable projectors
Trisio Adjustable projector for low voltage and mains voltage halogen lamps
For 3-circuit track
ø 68
227171
145 x 85
57QR-CB / GU5.3 HIT-SPOT / GZ10
ø 121
213167
145 x 85
57QR-111 / G53
1x50 Watt 1x50 Watt 1x65 Watt
of the lamp 0.13000.00 of the lamp 0.13034.00
of the lamp 0.13002.00
Pendant mounted on 3-circuit track
ø 68
145 x 8557
1019
of the lamp 0.13004.00
ø 121
948
145 x 8557
of the lamp 0.13028.00
of the lamp 0.13006.00
Surface mounted
ø 68
ø 15655
227
of the lamp 0.13010.00
213
ø 156
ø 121
of the lamp 0.13054.00
of the lamp 0.13012.00
Surface-mounted pendant
55ø 156
ø 68
1019
of the lamp 0.13020.00
of the lamp 0.13022.00
277Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS Trisio Plus / TrisioAdjustable projectors
Trisio Adjustable projector with IOS optics and control gear technology for metal halide lamps and low voltage halogen lamps
For 3-circuit track
ø 95
240189
145 x 8557
CDM-TC / G8.5 QT-12 / GY6.35
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x50 Watt
2x 7° /8° 0.13035.00 0.13038.00 0.50196.00 0.13041.00
2x17° 0.13036.00 0.13039.00 0.50197.00 0.13042.00
2x28°/29° 0.13037.00 0.13040.00 0.50198.00 0.13043.00
2x 9° 0.13014.00
2x12° 0.13015.00
2x15° 0.13016.00
Pendant mounted on 3-circuit track
ø 95
1031
145 x 8557
2x 7° /8° 0.13045.00 0.13048.00 0.50199.00 0.13051.00
2x17° 0.13046.00 0.13049.00 0.50200.00 0.13052.00
2x28°/29° 0.13047.00 0.13050.00 0.50201.00 0.13053.00
Surface mounted
240
ø 95
57ø 182 2x 7° /8° 0.13055.00 0.13058.00 0.50202.00 0.13061.00
2x17° 0.13056.00 0.13059.00 0.50203.00 0.13062.00
2x28°/29° 0.13057.00 0.13060.00 0.50204.00 0.13063.00
2x 9° 0.13024.00
2x12° 0.13025.00
2x15° 0.13026.00
Surface-mounted pendant
ø 95
1031
57ø 182 2x 7° /8° 0.13075.00 0.13078.00 0.50205.00 0.13081.00
2x17° 0.13076.00 0.13079.00 0.50206.00 0.13082.00
2x28°/29° 0.13077.00 0.13080.00 0.50207.00 0.13083.00
278
Trisio Plus / Trisio PROJECTORS
Adjustable projectors
Trisio Adjustable projector with IOS optics and control gear technology for metal halide lamps
For 3-circuit track
ø 144
320284
145 x 85 CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt
2x 7° 0.13112.00 0.13103.00 0.50208.00 0.13106.00 0.50212.00 0.13109.00
2x11° 0.13113.00 0.13104.00 0.50209.00 0.13107.00 0.50213.00 0.13110.00
2x14° 0.13139.00 0.13119.00 0.50210.00 0.13137.00 0.50214.00 0.13138.00
2x25° 0.13114.00 0.13105.00 0.50211.00 0.13108.00 0.50215.00 0.13111.00
Surface mounted
320
ø 182
ø 144
57
2x 7° 0.13116.00 0.13123.00 0.50216.00 0.13126.00
2x11° 0.13117.00 0.13124.00 0.50217.00 0.13127.00
2x14° 0.13140.00 0.13142.00 0.50218.00 0.13143.00
2x25° 0.13118.00 0.13125.00 0.50219.00 0.13128.00
Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
279
PROJECTORS Trisio Plus / TrisioAdjustable projectors
AURA
280
Design: Fabio Reggiani
Bink PROJECTORS
Adjustable projector
Design: Promoluce
Binkaerodynamic, light design
means it fits well into any
setting.
Restrained and essential,
the Bink projector effectively
demonstrates the Reggiani
commitment to miniaturise
luminaires so they fit in with
the architecture. The optical
compartment is a cylinder
that sits horizontally
on a slim, rectangular
extended platform where the
control gear is housed.
It also functions efficiently
because it is split into two
separate units for heat
dissipation.
The front of the cylinder
ends with a retaining ring
that holds the safety glass
or Fresnel lens; the back
slants at a 45° angle and has
ventilation slots to dissipate
the heat emitted by the lamp.
This unique shape reduces
the length of the bracket as
much as possible,
making the luminaire very
easy to handle.
In Bink, light beam and
luminaire blend to become
almost one, and its
281
PROJECTORS BinkAdjustable projector
La Triennale mostra marco Ferreri
282
Bink PROJECTORS
Adjustable projector
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Die-cast aluminium; structure with
separate compartments. The optical compartment is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
OPTICS IOS system (Interchangeable Optical
System) for RE LED LUCE. Instant interchangeability, a full range
of beams and high efficiency (up to 90).
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for
mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available
on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED PROJECTORS Die-cast aluminium connecting
module for ceiling mounting.
ADJUSTMENT
356° in the horizontal axis
90° in the vertical axis
TRACK MOUNTED SURFACE MOUNTED
Heat treated clear safety glass.
Fresnel lens for a clear definition of the
object to illuminate
Structure with separate compartments for optimum heat dissipation
The 45° slant at the backreduces the length of the bracket
283
PROJECTORS BinkAdjustable projector
Bink
RE LED LUCE incorporates the best high efficiency LEDs (up to 1100 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 85 to 90). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For versions with metal halide lamps. For versions with low voltage halogen lamp with built-in reflector.
Track-mounted projectors
Surface-mounted projectors
Optics IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
For metal halide lamps:high-efficient 99.9% pure aluminium parabolic reflector for excellent control of glare and of the light beam emitted. Lampholder with twist-lock fixing system.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
HF control gear for metal halide lamps with ceramic technology.
Toroidal or electronic transformer.
For Re Led Luce 14W • Non-dimmable driver (120 or 240V AC/DC).
284The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Bink PROJECTORS
Adjustable projector
BinkAdjustable projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
1x14W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
Version:Non-dimmable
2x 6° 0.32620.HQ 0.32620.WW 0.32620.NN
2x 8° 0.32618.HQ 0.32618.WW 0.32618.NN
2x11° 0.32621.HQ 0.32621.WW 0.32621.NN
2x15° 0.32622.HQ 0.32622.WW 0.32622.NN
2x26° 0.32623.HQ 0.32623.WW 0.32623.NN
W. W. Mira 0.32624.HQ 0.32624.WW 0.32624.NN
Surface mounted
215
ø9033
Version:Non-dimmable
2x 6° 0.32640.HQ 0.32640.WW 0.32640.NN
2x 8° 0.32638.HQ 0.32638.WW 0.32638.NN
2x11° 0.32641.HQ 0.32641.WW 0.32641.NN
2x15° 0.32642.HQ 0.32642.WW 0.32642.NN
2x26° 0.32643.HQ 0.32643.WW 0.32643.NN
W. W. Mira 0.32644.HQ 0.32644.WW 0.32644.NN
285Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS BinkAdjustable projector
BinkAdjustable projector with control gear technology for metal halide lamps and low voltage halogen lamps
For 3-circuit track
CDM-TC / G8.5 QR-CB / GU5.3
1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x20/35/50 Watt-12V
2x11° 0. 02796.00 0.50270.00 0. 02798.00 0.50272.00
2x31° 0. 02797.00 0.50271.00 0. 02799.00 0.50273.00
of the lamp 0. 02762.EV
Surface mounted
215
ø9033
2x11° 0. 02792.00 0.50274.00 0. 02794.00 0.50276.00
2x31° 0. 02793.00 0.50275.00 0. 02795.00 0.50277.00
of the lamp 0. 02759.EV
For 3-circuit track
CDM-TC / G8.5 CDM-T / G12 QR-111 / G53
1x35 Watt 1x50 Watt 1x70 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt 1x65 Watt-12V
2x 6° 0. 02777.00 0.50278.00 0. 02781.00
2x21° 0. 02778.00 0.50279.00 0. 02782.00
2x 9°/10°/ 8° 0. 02765.EV 0.50280.00 0. 02769.EV 0.50282.00 0. 02773.EV
2x26°/27°/28° 0. 02766.EV 0.50281.00 0. 02770.EV 0.50283.00 0. 02774.EV
of the lamp 0. 02785.EV
Surface mounted
2x 6° 0. 02779.00 0.50284.00 0. 02783.00
2x21° 0. 02780.00 0.50285.00 0. 02784.00
2x 9°/10°/ 8° 0. 02767.EV 0.50286.00 0. 02771.EV 0.50288.00 0. 02775.EV
2x26°/27°/28° 0. 02768.EV 0.50287.00 0. 02772.EV 0.50289.00 0. 02776.EV
of the lamp 0. 02786.EV
286
Design: Nome Cognome
ZeroZeroUno PROJECTORS
Adjustable projector
ZeroZeroUnoThe fascinating ZeroZeroUno,
with its TV studio look and
barn doors can be used to
control and mix single light
beams to show up colours,
shapes and volumes. Its
extraordinary light beam,
free from irregular fluxes
can be adjusted as desired
and magnify the clarity of the
setting, just like on a film set.
The optical compartment and
the control gear technologies
of ZeroZeroUno are
separated for optimum heat
dissipation.
ZeroZeroUno comes in
track mounted and surface
mounted versions.
ZeroZeroUno is designed
for use with metal halide
and halogen lamps and the
smaller versions are fitted
with a Fresnel lens with
concentric or flat parallel
prisms, while the larger
model has a lens system
to focus the light beam, a
framing projector to obtain
square or round light beams.
287
PROJECTORS ZeroZeroUnoAdjustable projector
288
ZeroZeroUno PROJECTORS
Adjustable projector
Mounting bracket
4 barn-doors for light beam control included in the packaging.
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Die-cast aluminium; structure with
separate compartments for optimum heat dissipation.
OPTICS WITH FRESNEL LENSES Application of the Fresnel lens makes
it possible to obtain very strong, even and above all clear light beams, which eliminate blurred and foggy effects.
In the version with concentric prisms (for symmetric light distribution) the light beam is simply projected, while the one with parallel prisms (for asymmetric light distribution) can light up walls and backdrops. This provides a high degree of control of the light beam and therefore complete mastery of how the various lighting layouts are developed.
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for
mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available
on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED
PROJECTORS
DEGREE OF PROTECTION IP20/40
BARN DOORS 4 barn-doors for light beam control
included in the packaging.
Compartment con-taining the control gear technologies
Handles to adjust the projector
ADJUSTMENT
356° in the horizontal axis
90° in the vertical axis
289
PROJECTORS ZeroZeroUnoAdjustable projector
ZeroZeroUnoSmall
ZeroZeroUno
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For versions with metal halide lampsand low voltage halogen lamps.
For versions with metal halide lamps and control gear technology.
For 3-circuit track
Surface-mounted version
Optics IOS reflectors with Ø 80 mm (LL2 and LL7) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
99.9% pure aluminium reflector.
Control gear technologies
High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
HF control gear for metal halide lamps with ceramic technology.
Toroidal transformer for halogen lamps.
For Re Led Luce 14W
• Non-dimmable driver (120 or 240V AC/DC).
For Re Led Luce 26W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
For Re Led Luce 32W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
For Re Led Luce 39W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
290The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
ZeroZeroUno PROJECTORS
Adjustable projector
ZeroZeroUno SmallAdjustable projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
235
225
105101
225
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.39901.HQ 0.39901.WW 0.39901.NN 0.39911.HQ 0.39911.WW 0.39911.NN
2x 8° 0.39902.HQ 0.39902.WW 0.39902.NN 0.39912.HQ 0.39912.WW 0.39912.NN
2x11° 0.39903.HQ 0.39903.WW 0.39903.NN 0.39913.HQ 0.39913.WW 0.39913.NN
2x15° 0.39904.HQ 0.39904.WW 0.39904.NN 0.39914.HQ 0.39914.WW 0.39914.NN
2x26° 0.39905.HQ 0.39905.WW 0.39905.NN 0.39915.HQ 0.39915.WW 0.39915.NN
W. W. Mira 0.39906.HQ 0.39906.WW 0.39906.NN 0.39916.HQ 0.39916.WW 0.39916.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 39911.HQ V. 39911.WW V. 39911.NN
2x 8° V. 39912.HQ V. 39912.WW V. 39912.NN
2x11° V. 39913.HQ V. 39913.WW V. 39913.NN
2x15° V. 39914.HQ V. 39914.WW V. 39914.NN
2x26° V. 39915.HQ V. 39915.WW V. 39915.NN
W. W. Mira V. 39916.HQ V. 39916.WW V. 39916.NN
ZeroZeroUno Adjustable projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
ø 66
225
235
105101
225
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.39951.HQ 0.39951.WW 0.39951.NN 0.39961.HQ 0.39961.WW 0.39961.NN
2x 8° 0.39952.HQ 0.39952.WW 0.39952.NN 0.39962.HQ 0.39962.WW 0.39962.NN
2x11° 0.39953.HQ 0.39953.WW 0.39953.NN 0.39963.HQ 0.39963.WW 0.39963.NN
2x15° 0.39954.HQ 0.39954.WW 0.39954.NN 0.39964.HQ 0.39964.WW 0.39964.NN
2x26° 0.39955.HQ 0.39955.WW 0.39955.NN 0.39965.HQ 0.39965.WW 0.39965.NN
W. W. Mira 0.39956.HQ 0.39956.WW 0.39956.NN 0.39966.HQ 0.39966.WW 0.39966.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 39961.HQ V. 39961.WW V. 39961.NN
2x 8° V. 39962.HQ V. 39962.WW V. 39962.NN
2x11° V. 39963.HQ V. 39963.WW V. 39963.NN
2x15° V. 39964.HQ V. 39964.WW V. 39964.NN
2x26° V. 39965.HQ V. 39965.WW V. 39965.NN
W. W. Mira V. 39966.HQ V. 39966.WW V. 39966.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks.
291Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS ZeroZeroUnoAdjustable projector
7
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.39931.HQ 0.39931.WW 0.39931.NN 2x11° 0.39921.HQ 0.39921.WW 0.39921.NN
2x 8° 0.39932.HQ 0.39932.WW 0.39932.NN 2x15° 0.39922.HQ 0.39922.WW 0.39922.NN
2x11° 0.39933.HQ 0.39933.WW 0.39933.NN 2x18° 0.39923.HQ 0.39923.WW 0.39923.NN
2x15° 0.39934.HQ 0.39934.WW 0.39934.NN 2x20° 0.39924.HQ 0.39924.WW 0.39924.NN
2x26° 0.39935.HQ 0.39935.WW 0.39935.NN 2x34° 0.39925.HQ 0.39925.WW 0.39925.NN
W. W. Mira 0.39936.HQ 0.39936.WW 0.39936.NN
2x 6° V. 39931.HQ V. 39931.WW V. 39931.NN 2x11° V. 39921.HQ V. 39921.WW V. 39921.NN
2x 8° V. 39932.HQ V. 39932.WW V. 39932.NN 2x15° V. 39922.HQ V. 39922.WW V. 39922.NN
2x11° V. 39933.HQ V. 39933.WW V. 39933.NN 2x18° V. 39923.HQ V. 39923.WW V. 39923.NN
2x15° V. 39934.HQ V. 39934.WW V. 39934.NN 2x20° V. 39924.HQ V. 39924.WW V. 39924.NN
2x26° V. 39935.HQ V. 39935.WW V. 39935.NN 2x34° V. 39925.HQ V. 39925.WW V. 39925.NN
W. W. Mira V. 39936.HQ V. 39936.WW V. 39936.NN
7
1x32W 1x39W
2420lm
3000K
CRI 94
2817lm
3000K
CRI 85
2980lm
4000K
CRI 84
2970lm
3000K
CRI 97
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x 6° 0.39981.HQ 0.39981.WW 0.39981.NN 2x11° 0.39971.HQ 0.39971.WW 0.39971.NN
2x 8° 0.39982.HQ 0.39982.WW 0.39982.NN 2x15° 0.39972.HQ 0.39972.WW 0.39972.NN
2x11° 0.39983.HQ 0.39983.WW 0.39983.NN 2x18° 0.39973.HQ 0.39973.WW 0.39973.NN
2x15° 0.39984.HQ 0.39984.WW 0.39984.NN 2x20° 0.39974.HQ 0.39974.WW 0.39974.NN
2x26° 0.39985.HQ 0.39985.WW 0.39985.NN 2x34° 0.39975.HQ 0.39975.WW 0.39975.NN
W. W. Mira 0.39986.HQ 0.39986.WW 0.39986.NN
2x 6° V. 39981.HQ V. 39981.WW V. 39981.NN 2x11° V. 39971.HQ V. 39971.WW V. 39971.NN
2x 8° V. 39982.HQ V. 39982.WW V. 39982.NN 2x15° V. 39972.HQ V. 39972.WW V. 39972.NN
2x11° V. 39983.HQ V. 39983.WW V. 39983.NN 2x18° V. 39973.HQ V. 39973.WW V. 39973.NN
2x15° V. 39984.HQ V. 39984.WW V. 39984.NN 2x20° V. 39974.HQ V. 39974.WW V. 39974.NN
2x26° V. 39985.HQ V. 39985.WW V. 39985.NN 2x34° V. 39975.HQ V. 39975.WW V. 39975.NN
W. W. Mira V. 39986.HQ V. 39986.WW V. 39986.NN
292The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
ZeroZeroUno PROJECTORS
Adjustable projector
ZeroZeroUno SmallAdjustable projector with control gear technology for metal halide lamps and low voltage halogen lamps
For 3-circuit track
235
225
105101
225
CDM-TC / G8.5
220
225
105101
225
QR-CB / GU5.3
1x35 Watt 1x20/35/50 Watt - 12V
2x11° 0. 02741.00 of the lamp 0. 02726.EV
2x31° 0. 02742.00
Surface-mounted version
220
225
105101
225
ø 66ø 66
225
235
105101
225
2x11° 0. 02739.00
2x31° 0. 02740.00
of the lamp 0. 02728.EV
ZeroZeroUnoAdjustable projector with control gear technology for metal halide lamps
For 3-circuit track Adjustable symmetric beam
350
265
350160
178
CDM-T / G12 QT-DE / R7s
74,9
1x70 Watt 1x100 Watt 1x150 Watt 1x120 Watt
2x17°- 2x32° 0. 02826.EV 0.50114.EV
2x18°- 2x35° 0. 02827.EV
2x15°- 2x35° 0. 02818.00
Adjustable asymmetric beam
= 7° / 10° 0. 02822.EV 0.50115.EV
= 8° / 11° 0. 02823.EV
Surface-mounted version Adjustable symmetric beam
145
350
265
350
90
160178
2x17°- 2x32° 0. 02846.EV 0.50116.EV
2x18°- 2x35° 0. 02847.EV
2x15°- 2x35° 0. 02824.00
Adjustable asymmetric beam
= 7° / 10° 0. 02844.EV 0.50117.EV
= 8° / 11° 0. 02845.EV
293Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS ZeroZeroUnoAdjustable projector
ZeroZeroUnoAdjustable projector with framing projectors and control gear technology for metal halide lamps
For 3-circuit track Adjustable symmetric beam
145
380
178160
330
330
CDM-T / G12
1x70 Watt
2x10°- 2x35° 0. 02828.EV
Surface-mounted version
145
380
178160
90
350
330
2x10°- 2x35° 0. 02848.EV
ZeroZeroUnoAdjustable projector with framing projectors and control gear technology for metal halide lamps
For 3-circuit track
430
330
CDM-T / G12
1x70 Watt 1x100 Watt 1x150 Watt
0. 02862.EV 0.50118.EV 0. 02863.EV
Surface-mounted version
145
430
350
0. 02864.EV 0.50119.EV 0. 02865.EV
294
Design: Nome Cognome
Unisio PROJECTORS
Fixed projector
Design: Fabio Reggiani
UnisioUnisio is a fixed projector
with a truncated cone body
– perfect for accent lighting
when there is no false ceiling
for recessing.
The optical compartment
and the control gear are
thermally independent,
for optimum reliability and
performance.
Unisio comes in two sizes
as pendant, surface-
mounted and track-mounted
luminaire.
295
PROJECTORS UnisioFixed projector
296
Unisio PROJECTORS
Fixed projector
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Die-cast aluminium; structure with
separate compartments. The upper part houses the control
gear, while the optical compartment is fitted with a passive heat sink, guaranteeing perfect efficiency.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90).
ANTI-GLARE SHIELD Die-cast aluminium, integrated into
the luminaire body.
Unisio
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94).Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Optics IOS reflectors with Ø 50 mm (LL1) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).
IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
Control gear technologies
High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
For Re Led Luce 10W
• Non-dimmable driver (220/240V).
For Re Led Luce 14W
• Non-dimmable driver (120 or 240V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.• Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off.Stand-by mode (consumption 0.3W).
For Re Led Luce 26W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%• Driver (198-265V) with DALI dimming protocol to dim luminaires separately or together (luminous intensity adjustment from 100% to 5%) and to digitally switch them on/off.Stand-by mode (consumption 0.3W).
Built-in anti-glare shield for excellent visual comfort
PROJECTORS UnisioFixed projector
Unisio Fixed projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
ø 91
185
1x10W
735lm
3000K
CRI 90
980lm
3000K
CRI 83
1000lm
4000K
CRI 83
LED+Driver 15,6W
Version:Non-dimmable
2x 7° 0.33070.HQ 0.33070.WW 0.33070.NN
2x15° 0.33071.HQ 0.33071.WW 0.33071.NN
2x24° 0.33072.HQ 0.33072.WW 0.33072.NN
Surface mounted
185
ø 91
ø 123
Version:Non-dimmable
2x 7° 0.33010.HQ 0.33010.WW 0.33010.NN
2x15° 0.33011.HQ 0.33011.WW 0.33011.NN
2x24° 0.33012.HQ 0.33012.WW 0.33012.NN
Surface-mounted pendant
ø 91
ø 12360
1185
Version:Non-dimmable
2x 7° 0.33100.HQ 0.33100.WW 0.33100.NN
2x15° 0.33101.HQ 0.33101.WW 0.33101.NN
2x24° 0.33102.HQ 0.33102.WW 0.33102.NN
297297Visit www.reggiani.net/code to access the product datasheet. 297The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
298The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Unisio PROJECTORS
Fixed projector
Unisio Fixed projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
ø 119
207
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
LED+Driver 15,6W LED+Driver 27,7W
Version:Non-dimmable
2x 6° 0.33190.HQ 0.33190.WW 0.33190.NN 0.33241.HQ 0.33241.WW 0.33241.NN
2x 8° 0.33189.HQ 0.33189.WW 0.33189.NN 0.33242.HQ 0.33242.WW 0.33242.NN
2x11° 0.33191.HQ 0.33191.WW 0.33191.NN 0.33243.HQ 0.33243.WW 0.33243.NN
2x15° 0.33192.HQ 0.33192.WW 0.33192.NN 0.33244.HQ 0.33244.WW 0.33244.NN
2x26° 0.33193.HQ 0.33193.WW 0.33193.NN 0.33245.HQ 0.33245.WW 0.33245.NN
W. W. Mira 0.33194.HQ 0.33194.WW 0.33194.NN 0.33246.HQ 0.33246.WW 0.33246.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 33190.HQ V. 33190.WW V. 33190.NN V. 33241.HQ V. 33241.WW V. 33241.NN
2x 8° V. 33189.HQ V. 33189.WW V. 33189.NN V. 33242.HQ V. 33242.WW V. 33242.NN
2x11° V. 33191.HQ V. 33191.WW V. 33191.NN V. 33243.HQ V. 33243.WW V. 33243.NN
2x15° V. 33192.HQ V. 33192.WW V. 33192.NN V. 33244.HQ V. 33244.WW V. 33244.NN
2x26° V. 33193.HQ V. 33193.WW V. 33193.NN V. 33245.HQ V. 33245.WW V. 33245.NN
W. W. Mira V. 33194.HQ V. 33194.WW V. 33194.NN V. 33246.HQ V. 33246.WW V. 33246.NN
Version:DALI dimming*
2x 6° D.33190.HQ D.33190.WW D.33190.NN D.33241.HQ D.33241.WW D.33241.NN
2x 8° D.33189.HQ D.33189.WW D.33189.NN D.33242.HQ D.33242.WW D.33242.NN
2x11° D.33191.HQ D.33191.WW D.33191.NN D.33243.HQ D.33243.WW D.33243.NN
2x15° D.33192.HQ D.33192.WW D.33192.NN D.33244.HQ D.33244.WW D.33244.NN
2x26° D.33193.HQ D.33193.WW D.33193.NN D.33245.HQ D.33245.WW D.33245.NN
W. W. Mira D.33194.HQ D.33194.WW D.33194.NN D.33246.HQ D.33246.WW D.33246.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
Surface-mounted pendant
207
ø 119
ø 155
Version:Non-dimmable
2x 6° 0.33130.HQ 0.33130.WW 0.33130.NN 0.33271.HQ 0.33271.WW 0.33271.NN
2x 8° 0.33129.HQ 0.33129.WW 0.33129.NN 0.33272.HQ 0.33272.WW 0.33272.NN
2x11° 0.33131.HQ 0.33131.WW 0.33131.NN 0.33273.HQ 0.33273.WW 0.33273.NN
2x15° 0.33132.HQ 0.33132.WW 0.33132.NN 0.33274.HQ 0.33274.WW 0.33274.NN
2x26° 0.33133.HQ 0.33133.WW 0.33133.NN 0.33275.HQ 0.33275.WW 0.33275.NN
W. W. Mira 0.33134.HQ 0.33134.WW 0.33134.NN 0.33276.HQ 0.33276.WW 0.33276.NN
Version:Dimmable (1-10V DC)
2x 6° V. 33130.HQ V. 33130.WW V. 33130.NN V. 33271.HQ V. 33271.WW V. 33271.NN
2x 8° V. 33129.HQ V. 33129.WW V. 33129.NN V. 33272.HQ V. 33272.WW V. 33272.NN
2x11° V. 33131.HQ V. 33131.WW V. 33131.NN V. 33273.HQ V. 33273.WW V. 33273.NN
2x15° V. 33132.HQ V. 33132.WW V. 33132.NN V. 33274.HQ V. 33274.WW V. 33274.NN
2x26° V. 33133.HQ V. 33133.WW V. 33133.NN V. 33275.HQ V. 33275.WW V. 33275.NN
W. W. Mira V. 33134.HQ V. 33134.WW V. 33134.NN V. 33276.HQ V. 33276.WW V. 33276.NN
Version:DALI dimming
2x 6° D.33130.HQ D.33130.WW D.33130.NN D.33271.HQ D.33271.WW D.33271.NN
2x 8° D.33129.HQ D.33129.WW D.33129.NN D.33272.HQ D.33272.WW D.33272.NN
2x11° D.33131.HQ D.33131.WW D.33131.NN D.33273.HQ D.33273.WW D.33273.NN
2x15° D.33132.HQ D.33132.WW D.33132.NN D.33274.HQ D.33274.WW D.33274.NN
2x26° D.33133.HQ D.33133.WW D.33133.NN D.33275.HQ D.33275.WW D.33275.NN
W. W. Mira D.33134.HQ D.33134.WW D.33134.NN D.33276.HQ D.33276.WW D.33276.NN
Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS UnisioFixed projector
Unisio Fixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted pendant
ø 119
ø 15570
1207
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Non-dimmable
2x 6° 0.33220.HQ 0.33220.WW 0.33220.NN 0.33371.HQ 0.33371.WW 0.33371.NN
2x 8° 0.33219.HQ 0.33219.WW 0.33219.NN 0.33372.HQ 0.33372.WW 0.33372.NN
2x11° 0.33221.HQ 0.33221.WW 0.33221.NN 0.33373.HQ 0.33373.WW 0.33373.NN
2x15° 0.33222.HQ 0.33222.WW 0.33222.NN 0.33374.HQ 0.33374.WW 0.33374.NN
2x26° 0.33223.HQ 0.33223.WW 0.33223.NN 0.33375.HQ 0.33375.WW 0.33375.NN
W. W. Mira 0.33224.HQ 0.33224.WW 0.33224.NN 0.33376.HQ 0.33376.WW 0.33376.NN
Version:Dimmable (1-10V DC)
2x 6° V. 33220.HQ V. 33220.WW V. 33220.NN V. 33371.HQ V. 33371.WW V. 33371.NN
2x 8° V. 33219.HQ V. 33219.WW V. 33219.NN V. 33372.HQ V. 33372.WW V. 33372.NN
2x11° V. 33221.HQ V. 33221.WW V. 33221.NN V. 33373.HQ V. 33373.WW V. 33373.NN
2x15° V. 33222.HQ V. 33222.WW V. 33222.NN V. 33374.HQ V. 33374.WW V. 33374.NN
2x26° V. 33223.HQ V. 33223.WW V. 33223.NN V. 33375.HQ V. 33375.WW V. 33375.NN
W. W. Mira V. 33224.HQ V. 33224.WW V. 33224.NN V. 33376.HQ V. 33376.WW V. 33376.NN
Version:DALI dimming
2x 6° D.33220.HQ D.33220.WW D.33220.NN D.33371.HQ D.33371.WW D.33371.NN
2x 8° D.33219.HQ D.33219.WW D.33219.NN D.33372.HQ D.33372.WW D.33372.NN
2x11° D.33221.HQ D.33221.WW D.33221.NN D.33373.HQ D.33373.WW D.33373.NN
2x15° D.33222.HQ D.33222.WW D.33222.NN D.33374.HQ D.33374.WW D.33374.NN
2x26° D.33223.HQ D.33223.WW D.33223.NN D.33375.HQ D.33375.WW D.33375.NN
W. W. Mira D.33224.HQ D.33224.WW D.33224.NN D.33376.HQ D.33376.WW D.33376.NN
299
300
Design: Fabio Reggiani
Quadriplus PROJECTORS
Adjustable projector
Design: Fabio Reggiani
QuadriplusQuadriplus is an
adjustable projector with
interchangeable LED
LUCE Comfort optics.
The excellent quality and
efficiency of LED LUCE
LL4 and the flexibility of
the lighting design brought
about by the interchangeable
optics make this luminaire
suitable for general or
accent lighting also in large
spaces.
301
PROJECTORS QuadriplusAdjustable projector
302
Quadriplus PROJECTORS
Adjustable projector
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Die-cast aluminium; it houses
the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED PROJECTORS Using accessory code 0.02289.0010/21/28
DEGREE OF PROTECTION IP20/40
ADJUSTMENT
90° in the vertical axis
356° in the horizontal axis
356°
90°
Quadriplus
RE LED LUCE incorporates the best high efficiency LEDs (up to 4400 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 85 to 90). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Optics Four IOS reflectors with Ø 80 mm (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams; satin with clear glass lenses for the Wall Washer Mira version. There are also versions with gold optics.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
The Re Led Luce system includes drivers with diversified dimming features, to meet the widest design demands.
For Re Led Luce 4x14W • Non-dimmable driver (120 or 240V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
Emergency lighting The RE LED Luce versions 4x14W are set up for connection to the emergency pack.Code 0.35087.0000 for 14W.
Cooling fins foroptimum heat dissipation
Integral shield that maintains good light emission to produce a uniform light beam
303Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
PROJECTORS QuadriplusAdjustable projector
QuadriplusAdjustable projector with four IOS optics, LED LUCE and control gear technology
For 3-circuit track
220
ø191397
4x14W
3440lm
3000K
CRI 90
3980lm
3000K
CRI 85
4400lm
4000K
CRI 85
Version:Non-dimmable
2x 6° 0.36131.HQ 0.36131.WW 0.36131.NN
2x 8° 0.36132.HQ 0.36132.WW 0.36132.NN
2x11° 0.36133.HQ 0.36133.WW 0.36133.NN
2x15° 0.36134.HQ 0.36134.WW 0.36134.NN
2x26° 0.36135.HQ 0.36135.WW 0.36135.NN
W. W. Mira 0.36136.HQ 0.36136.WW 0.36136.NN
Version:Dimmable (1-10V DC)*
2x 6° V. 36131.HQ V. 36131.WW V. 36131.NN
2x 8° V. 36132.HQ V. 36132.WW V. 36132.NN
2x11° V. 36133.HQ V. 36133.WW V. 36133.NN
2x15° V. 36134.HQ V. 36134.WW V. 36134.NN
2x26° V. 36135.HQ V. 36135.WW V. 36135.NN
W. W. Mira V. 36136.HQ V. 36136.WW V. 36136.NN
*Caution: the track-mounted projectors with dimming provision require specific adapters and tracks
304
Design: Fabio Reggiani
Ambar PROJECTORS
Adjustable projector
Ambarincorporates the considerable
advantages of the IOS system
in a beautiful, eye-catching
object.
Ambar is a highly versatile
pendant or track mounted
projector; it is the latest
result of the fertile
partnership between
Reggiani and Rogers Stirk
Harbour + Partners.
A modern, transparent
design reveals the technical
complexity of the control
gear, fully detached from the
aluminium body that houses
an optical compartment
integrating the IOS system.
The technical and functional
details become decorative,
like the red silicone rubber
adjustment knob, inspiring
the imagination and
facilitating use.
Ambar comes in two sizes
and as track-mounted
luminaire, track-mounted
and surface-mounted
pendant; it is perfect
for accent lighting and
Design: Rogers Stirk Harbour + Partners
305
PROJECTORS AmbarAdjustable projector
Pompidou Centre - Paris, France
306
Ambar PROJECTORS
Adjustable projector
STANDARD FINISH 28 metallised grey
BODY Die-cast aluminium, with adjustment
knob coated with red silicone rubber and component box made from clear polycarbonate.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90)
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED PROJECTORS Die-cast aluminium connecting
module for ceiling mounting.
BALANCING Pendants with ø 80 mm are fitted with
a colour scale for perfect balancing.
ANTI-GLARE LOUVRE Luminaires with ø 80 mm have the
anti-glare louvre included in the packaging.
ADJUSTMENT 90° in the vertical axis 356° in the horizontal axis
Connecting module for ceiling mounting
Colour scale for luminaire balancing
Anti-glare louvre
Built-in anti-glare shield for utmost visual comfort
307
PROJECTORS AmbarAdjustable projector
Ambar
For IOS versions with metal halide lamps.
Optics 99.99% pure aluminium IOS reflector with Ø 80 / 130 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics, selective filters for lighting foodstuffs or coloured dichroic filters.
Control gear technologies HF control gear for metal halide lamps with ceramic technology.
308The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Ambar PROJECTORS
Adjustable projector
Ambar Adjustable projector with IOS optics and control gear technology for metal halide lamps.
For 3-circuit track
130x85
265ø100
215
CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt
2x 7° / 8° 0.20545.00 0.20550.00 0.50174.00 0.20555.00
2x17° 0.20546.00 0.20551.00 0.50175.00 0.20556.00
2x28°/29° 0.20547.00 0.20552.00 0.50176.00 0.20557.00
Pendant mounted on 3-circuit track
ø100
3000
250
2x 7° / 8° 0.20585.00 0.20590.00 0.50177.00 0.20595.00
2x17° 0.20586.00 0.20591.00 0.50178.00 0.20596.00
2x28°/29° 0.20587.00 0.20592.00 0.50179.00 0.20597.00
Surface-mounted pendant
250
3000
ø100
2x 7° / 8° 0.20495.00 0.20500.00 0.50180.00 0.20505.00
2x17° 0.20496.00 0.20501.00 0.50181.00 0.20506.00
2x28°/29° 0.20497.00 0.20502.00 0.50182.00 0.20507.00
309Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS AmbarAdjustable projector
Ambar Adjustable projector with IOS optics and control gear technology for metal halide lamps.
For 3-circuit track
130x85 235
285ø140
CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt
2x 7° 0.20720.00 0.20725.00 0.50184.00 0.20730.00
2x11° 0.20721.00 0.20726.00 0.50185.00 0.20731.00
2x14° 0.20723.00 0.20728.00 0.50186.00 0.20733.00
2x25° 0.20722.00 0.20727.00 0.50187.00 0.20732.00
Pendant mounted on 3-circuit track
ø140
3000
320
2x 7° 0.20740.00 0.20745.00 0.50188.00 0.20750.00
2x11° 0.20741.00 0.20746.00 0.50189.00 0.20751.00
2x14° 0.20743.00 0.20748.00 0.50190.00 0.20753.00
2x25° 0.20742.00 0.20747.00 0.50191.00 0.20752.00
Surface-mounted pendant
320
3000
ø140
2x 7° 0.20700.00 0.20705.00 0.50192.00 0.20710.00
2x11° 0.20701.00 0.20706.00 0.50193.00 0.20711.00
2x14° 0.20703.00 0.20708.00 0.50194.00 0.20713.00
2x25° 0.20702.00 0.20707.00 0.50195.00 0.20712.00
310
Sunny Light / Bijou / Low Voltage PROJECTORS
Adjustable projector
The Low Voltage series
includes an extensive variety
of adjustable, surface or
track mounted projectors
which are excellent for accent
lighting; their materials
and design are different but
they are united by the use of
halogen lamps with dichroic
reflector. The compact size,
fine materials make them
extremely suitable for stylish,
defined lighting
311
PROJECTORS Sunny Light / Bijou / Low VoltageAdjustable projector
Rostov Hotel - Rostov, Russia
Arturo Calle - Colombia
312The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Sunny Light / Bijou PROJECTORS
Adjustable projector
Sunny LightAdjustable projector for low voltage halogen lamps with built-in transformer
For 3-circuit track Surface mounted
QR-CB QR-CB
ø 82
192
ø 82
192
GU5.3 GU5.3
0. 02812.EV 1x20/35/50 W 0. 05590.EV 1x20/35/50 W
BijouAdjustable solid brass projector for low voltage halogen lamps Adjustable solid brass projector for low voltage halogen lamps
95
ø 40
53
QR-CB
ø 55
63115
QR-CB
GU4 GU5.3
0. 02021.00 senza adattatore 1x20/35 W 0. 02022.00 senza adattatore 1x20/35/50 W
Adjustable solid brass projector for low voltage halogen lamps Adjustable solid brass projector for low voltage halogen lamps
Surface mounted Surface mounted
max 130
ø 50
ø 40
53
QR-CB QR-CB
ø90
max 155
ø 55
63
GU4 GU5.3
0. 02010.00 1x20/35 W 0. 02013.00 1x20/35/50 W
Adjustable projector for low voltage halogen lamps with built-in transformer Adjustable projector for low voltage halogen lamps with built-in transformer
Surface mounted Surface mounted
max 145
ø 90
ø 40
53
QR-CB QR-CB
100x100
max 165
ø 55
63
GU4 GU5.3
0. 02018.EV 1x20/35 W 0. 02019.EV 1x20/35/50 W
313Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS Low voltageAdjustable projector
Low voltage Low voltageAdjustable projector for low voltage halogen lamps Adjustable projector for low voltage halogen lamps
Surface mounted Track mounted
ø 50
40
QR-CB
65120
60
QR-CB
GU4 GU5.3
0. 03744.00 1x20/35 W 0. 03735.00 1x20/35/50 W
Adjustable projector for low voltage halogen lamps Adjustable projector for low voltage halogen lamps with built-in transformer
Surface mounted Surface mounted
QR-CB
100x100
max 165
65
60
QR-CB
60x60
65 60
GU5.3 GU5.3
0. 03743.00 1x20/35/50 W 0. 03762.EV 1x20/35/50 W
314
Design: Fabio Reggiani
Cyl light PROJECTORS
Fixed projector
Cyl light is a surface
mounted fixed projector for
lighting spaces without false
ceilings.
Its neutral and meticulously
clean lines make it
compatible with any
architectural style.
The body, with built-in
control gear, consists
of a cylinder in varying
dimensions depending on
the light sources used.
Cyl Light also comes in the
pendant version and exterior
version with a high degree of
protection (IP67).
Cyl light
Design: Fabio Reggiani
315
PROJECTORS Cyl lightFixed projector
Sports Centre Tellene - Rome, Italy
316The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Cyl light PROJECTORS
Fixed projector
Cyl light Fixed COMPACT projector with control gear technology for compact fluorescent lamps
ø 244
135
TC-D / G24d-1 TC-D / G24d-2 TC-D / G24d-3
2x13 Watt 2x18 Watt 2x26 Watt
2x38° 0. 07610.EV
2x45° 0. 07611.EV
2x47° 0. 07612.EV
Cyl light Fixed COMFORT projector with control gear technology for compact fluorescent lamps
ø 244
202
TC-D / G24d-2 TC-D / G24d-3
2x18 Watt 2x26 Watt
2x47° 0. 07630.EV 0. 07631.EV
Cyl light Fixed projector with control gear technology for double-ended metal halide lamps
ø 244
230
HIT-DE / RX7s
1x70 Watt 1x150 Watt
2x36° 0. 07665.EV 0. 07666.EV
Cyl light Fixed projector with control gear technology for double-ended metal halide lamps
ø 260
285
HIT-DE / RX7s HIT-DE / FC2
1x70 Watt 1x150 Watt 1x250 Watt
2x41° 0. 07870.EV
2x44° 0. 07871.EV
2x46° 0. 07692.EV
317Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS Cyl lightFixed projector
Cyl light Fixed projector with control gear technology for compact fluorescent lamps
With anti-glare turbo louvre
ø 260
215
TC-D / G24d-3 TC-DE / G24q-3 TC-D / G24d-3 TC-DE / G24q-3
2x26 Watt 2x26 Watt 2x26 Watt 2x26 Watt
HPF HF HPF HF
2x62° 0. 07652.EV 0. 07672.00 2x47° 0. 07654.EV 0. 07687.00
Version:for permanent illumination when used as emergency lighting
2x42° 0. 07658.EV 2x42° 0. 07694.EV
TC-D / G24d-3 + TC-DE / G24q-3
Version:for permanent illumination when used as emergency lighting
2x42° 0. 07678.00 2x42° 0. 07668.00
Cyl light Fixed projector with control gear technology for compact fluorescent lamps
With anti-glare turbo louvre
ø 260
285
TC-TE / GX24q-3 TC-TE / GX24q-4 TC-TE / GX24q-3 TC-TE / GX24q-4
2x32 Watt 2x42 Watt 2x32 Watt 2x42 Watt
HPF HF HPF HF
2x56° 0. 07815.EV 2x51° 0. 07825.EV
2x60° 0. 07820.00 2x52° 0. 07830.00
Version:for permanent illumination when used as emergency lighting
2x42° 0. 07816.EV 2x51° 0. 07826.EV
2x42° 0. 07821.00 2x52° 0. 07831.00
318
Narancia PROJECTORS
Fixed / adjustable projector
Design: Fabio Reggiani
NaranciaNarancia is a wall mounted
projector with direct/indirect
light distribution that can
elegantly assert itself in
both classic architecture
and modern settings.
Harmonious shapes with
a strong personality,
excellent control of the
indirect asymmetric light
and flexibility of the direct
light brought about by the
interchangeable optics,
the excellent quality and
efficiency of LED LUCE and
the dimming simplicity of the
light beam guarantee a wide
range of light settings.
319
PROJECTORS NaranciaFixed / adjustable projector
Sodersjukhuset Hospital
320
Narancia PROJECTORS
Fixed / adjustable projector
STANDARD FINISHES 10 white 21 black 28 metallised grey
BODY Die-cast aluminium; structure with
separate compartments for optimum heat dissipation.
It is fitted with a die-cast aluminium passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
SHIELD Extra-light, tempered safety glass;
resistant to temperature and mechanical shock.
INSTALLATION Rapid installation by means of
mechanical/electrical bracket without opening the spotlight. Snap-fit terminal. Narancia has provision for double switch (indirect light only, direct light only or both).
Possibility of inverted mounting (higher downward flux).
REFLECTOR Anti-static metallised polycarbonate
with scratch resistant protective coating; LL6 optics for asymmetric light distribution (upwards) and LL2 interchangeable optics for direct light (downwards).
INSTALLATION POSITION 0°, traditional mounting - Suitable
for every situation that calls for soft indirect lighting obtained when it reflects off the walls.
180°, inverted mounting (where specified) - Recommended in any situation that requires “prominent” lighting in places where it is not possible to install light points in the ceiling.
ADJUSTMENT In the versions for metal halide lamps
and compact fluorescent lamps, the optical compartment (IP55) is adjustable to three positions (0°, 20°, 40°) with provision for locking the luminaire in the desired position.
Possibility of inverted mounting (higher downward flux)
Built-in dimmer for luminous intensity adjustment of each single luminaire
0°
180°
321
PROJECTORS NaranciaFixed / adjustable projector
Narancia
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Versions for metal halide lamps, halogen lamps and compact fluorescent lamps
Optics LL6 optics for asymmetric light distribution made from anti-static metallised polycarbonate with scratch resistant protective coating.IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
99.9% pure aluminium reflector with asymmetric light distribution and heat treated clear safety glass.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
HF control gear for metal halide lamps with ceramic technology. HPF or HF control gear for compact fluorescent lamps. Mains voltage for halogen lamps.
HPF or HF control gear for metal halide lamps with ceramic technology. HPF or HF control gear for compact fluorescent lamps. Mains voltage for halogen lamps.
FOR RE LED LUCE
Dimmer
• Driver (120 or 240V AC/DC) with standard dimmer: Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage halogen lamps, for luminous intensity adjustment from 100% to 30%.
With built-in dimmer for luminous intensity adjustment of each single luminaire.
Emergency lighting Versions for metal halide lamp with stand-by halogen lamp (1x100W).
Versions with compact fluorescent lamps for permanent illumination when used as emergency lighting.
322The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Narancia PROJECTORS
Fixed / adjustable projector
NaranciaFixed wall mounted projector with direct/indirect light distribution, IOS optics, LED LUCE and control gear technology
6
132
207
260 260
3x14W
2x14W 1x14W2x860lm
1x860lm
3000K
CRI 90
2x995lm
1x995lm
3000K
CRI 85
2x1100lm
1x1100lm
4000K
CRI 85
Version:Phase cut dimming
Asymmetric
indirect
direct
2x26°0.33401.HQ 0.33401.WW 0.33401.NN
Version:With built-in dimmer for luminous intensity adjustment of each single luminaire
Asymmetric
indirect
direct
2x26°0.33411.HQ 0.33411.WW 0.33411.NN
NaranciaFixed wall mounted projector with direct/indirect light distribution for metal halide lamps, halogen lamps and compact fluorescent lamps
CDM-TC / G8.5 QT-DE / R7sTC-T
GX24d-1TC-TE
GX24q-1TC-T
GX24d-2TC-TE
GX24q-2
74,9
1x20 Watt 1x35 Watt 1x70 Watt 1x120 Watt 1x13 Watt 1x18 Watt
HPF HF HPF HF
0.11009.00 0.11011.00 0.11013.00 0.11026.00 0.11020.EV 0.11019.00 0.11022.EV 0.11021.00
NaranciaFixed wall mounted projector with indirect light distribution for metal halide lamps, halogen lamps and compact fluorescent lamps
CDM-TC / G8.5 QT-DE / R7sTC-T
GX24d-1TC-TE
GX24q-1TC-T
GX24d-2TC-TE
GX24q-2
74,9
1x20 Watt 1x35 Watt 1x70 Watt 1x120 Watt 1x13 Watt 1x18 Watt
HPF HF HPF HF
asymmetric beam
0.11001.00 0.11003.00 0.11005.00 0.11024.00
2x55° 0.11016.EV 0.11015.00 0.11018.EV 0.11017.00
323Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS NaranciaFixed / adjustable projector
NaranciaFixed wall mounted projector with direct/indirect light distribution for double ended metal halide lamps, halogen lamps and compact fluorescent lamps
HIT-DE / RX7s HIT-DE / FC2 QT-DE / R7s TC-TE / GX24q-3 TC-TE / GX24q-4
114,2
1x70 Watt 1x150 Watt 1x250 Watt 1x230 Watt 2x32 Watt 2x42 Watt
0.11043.00 0.11046.EV 0.11050.EV 0.11078.00 0.11073.00 0.11075.00
0.11047.00
Version:with stand-by halogen lamp
1x100 Watt
0.11045.00 0.11048.EV 0.11052.EV
74,9
QT-DE/ R7s
Version:for permanent illumination when used as emergency lighting
0.11097.00 0.11099.00
NaranciaFixed wall mounted projector with indirect light distribution for double ended metal halide lamps, halogen lamps and compact fluorescent lamps
HIT-DE / RX7s HIT-DE / FC2 QT-DE / R7s TC-TE / GX24q-3 TC-TE / GX24q-4
114,2
1x70 Watt 1x150 Watt 1x250 Watt 1x230 Watt 2x32 Watt 2x42 Watt
asymmetric beam
0.11031.00 0.11038.EV 0.11076.00
0.11034.EV
0.11035.00
2 x54° 0.11065.00 0.11067.00
Version:with stand-by halogen lamp
1x100 Wattasymmetric
beam
0.11033.00 0.11040.EV
0.11036.EV
74,9
QT-DE/ R7s
0.11037.00
Version:for permanent illumination when used as emergency lighting
2 x54° 0.11089.00 0.11091.00
324La rapida evoluzione tecnologica del LED fa si che le sue prestazioni siano costantemente in evoluzione.
I dati tecnici esposti sono aggiornati al Marzo 2012. Consultate le schede tecniche ON LINE per le specifiche attuali.
Track systems 3 CIRCUITS
For surface and recessed installation
3-circuit track for surface mounting
Mains voltage
(16 A at 230V)
3-circuits:
L1 + L2 + L3 + neutral + earth (16A / 230V )
3-circuit track for recessed mounting
Mains voltage
(16 A at 230V).
Standard finishes: 10 white 21 black 28 metallised grey 30 anodised aluminium
SURFACE RECESSED INSTALLATION
32,5
32,5
SISTEMA DA SUPERFICIE E DA INCASSO
56
32,5
100
160
175
66100
66100
66100
66100
In order to guarantee the IP40 degree of
protection, the track needs the relative
blanking cover 0.02248.00
3-circuit trackfor surface mounting
0.02240.00 l. mm 2000
0.02241.00 l. mm 3000
0.02242.00 l. mm 4000
Finishes: .10 .21 .30
3-circuit trackfor recessed mounting
0.02244.00 l. mm 2000
0.02245.00 l. mm 3000
0.02246.00 l. mm 4000
Finishes: .10 .21 .30
3-circuit adapterwith nipples
0.02270.00
Finishes: .10 .21 .28
Live end
0.02251.00
Finishes: .10 .21
T-Coupler
0.02259.00
It can be used as ballast.
Finishes: .10 .21
T-Coupler
0.02260.00
It can be used as ballast.
Finishes: .10 .21
T-Coupler
0.02261.00
It can be used as ballast.
Finishes: .10 .21
T-Coupler
0.02262.00
It can be used as ballast.
Finishes: .10 .21
X-Coupler
0.02263.00
It can be used as ballast.
Finishes: .10 .21
End cap dead end
0.02264.00
Straight connector
0.02254.00
Finishes: .10 .21
Live end, mirror image
0.02252.00
Finishes: .10 .21
Centre feed
0.02253.00
Finishes: .10 .21
90° elbow earth inside
0.02257.00
It can be used as ballast.
Finishes: .10 .21
90° elbow earth outside
0.02258.00
It can be used as ballast.
Finishes: .10 .21
Adjustable cornerconnector 60°-300°
0.02256.00
Finishes: .10 .21
Blanking coverl. mm 3000
0.02248.00
Finish: .10
Flexible corner connector0°-360°
0.02255.00
Finishes: .10 .21
Bending tool
0.02247.00
Adapter features:
Nominal values 10A, 250V
Protection class
Tractional force 10 Kg
Max. torsional stress. 0,25 Kg m
66
66
66 66
66 66
325www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.
3 CIRCUITS Track systemsFor suspended installation
Point clamp suspension
0.02283.00*
*to be completed with code 0.02223.00 - 0.02224.00
Finishes: .10 .21
Centre feed suspensionF max 20 kg
0.02285.00
Finishes: .10 .21
Conduit suspension setF max 20 kg
0.02280.00*
Ø mm 16 l. mm 1000
*to be completed with relative coupler suspensions. (0.02284.00 / 0.02285.00 etc.)
Finishes: .10 .21
Rod suspension set M6F max 20 kg
0.02223.00*
l. mm 1000
*to be completed with relative coupler suspensions. (0.02283.00 / 0.02284.00 / 0.02285.00 etc.)
Finishes: .10 .21
Wire suspension set M6F max 20 kg
0.02224.00*
l. mm 1500
*to be completed with relative coupler suspensions (0.02283.00 / 0.02284.00 / 0.02285.00 etc.)
Finishes: .10 .21
Ceiling clamp
0.02265.00
Finishes: .10 .30
Wall bracket
0.02268.00
Finishes: .30
Suspension clamp
0.02266.00
Finishes: .10 .30
Arm for trackwall mounting
0.02269.00
Finishes: .30
Support for centre feed
0.02267.00
l. mm 182
Finishes: .30
Cover plate for feeds
0.02249.00
Cover plate for connectors
0.02250.00
Finishes: .10 .21
Suspension system for 3-circuit track
• covering of power inlets;
• feasy installation (no parts need to be removed during mounting)
and adjustable height.
Accessories for surface mounted tracks
Accessories for recessed tracks
SISTEMA A SOSPENSIONE
Installation examples
4040
70
100
800
182
RIDGEON TRACK
2264OR AS AN ALTERNAVE
2251
2252
2256
2263
2258
2260
2258
2264RIDGE
ON TRACK
2264OR AS AN ALTERNAVE
2251
2252
2256
2263
2257
2262
2257
2264RIDGE
ON TRACK
2264OR AS AN ALTERNAVE
2252
2251
2256
2263
2257
2259
2264
2257
326La rapida evoluzione tecnologica del LED fa si che le sue prestazioni siano costantemente in evoluzione.
I dati tecnici esposti sono aggiornati al Marzo 2012. Consultate le schede tecniche ON LINE per le specifiche attuali.
Track systems 3 CIRCUITS
Enclosed track for suspended installation
Enclosed 3-circuit track for suspended mounting.
Mains voltage (16 A at 230V).
3-circuit: L1 + L2 + L3 + neutral + earth
3-circuit adapterwith nipples
0.02270.00
Finishes: .10 .21 .28
Enclosed live end
0.02232.00
Finishes: .10 .21 .28
Enclosed 90° elbow earthinside
0.02235.00
Finishes: .10 .21 .28
Enclosed 90° elbow earthoutside
0.02236.00
Finishes: .10 .21 .28
End cap dead end
0.02264.00
Finishes: .10 .21
Wire suspension set M6F max 20 kg
0.02224.00
l. mm 1500
Finishes: .10 .21
Enclosed live end, mirrorimage
0.02233.00
Finishes: .10 .21 .28
Straight connector
0.02234.00
Finishes: .10 .21
Rod suspension set M6F max 20 kg
0.02223.00
l. mm 1000
Finishes: .10 .21
Bending tool
0.02247.00
Adapter features:
Nominal values 10A, 250V
Protection class
Tractional force 10 Kg
Max. torsional stress 0,25 Kg m
Enclosed 3- circuit track forsuspended mounting
0.02230.00 l. mm 2000
0.02231.00 l. mm 3000
Finishes: .10 .21 .28
35
80
327www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.
CONNECTION OF 3-CIRCUIT TRACK
MOUNTING DISTANCE AND LOAD CAPACITY
The tracks are supplied with mounting holes.
Recommended mounting distance: 1000 mm
5N 5N 5N 5N 5N 5N 5N 5N
100 200
L=2000 mm
50N 50N 50N 50N
100 200
L=1000 mm
50N
5N 5N
Guide Track
Locking screw
Installation of the connector part to the track
When installing the connector parts on the track, make sure that the
guide enters the duct at the bottom of the track. Mechanical joining of
the connector parts to the track is through self-locking screws.
To cut electrified tracks
The electrified tracks are supplied in the standard lengths. They can be
easily cut to the required length with a hacksaw or circular saw suitable
for cutting aluminium. After cutting the track, bend the conductors at
90° using tool code 0.02247.00.
The conductors can be introduced in the required size and terminated
with a plastic block at the other end of the tool.
The bent conductors are located at the correct distance from the end of
the track when the plastic block does not project but remains flush with
the end of the track.
N.B. A load not exceeding 10 kg is permissible for an adapter with power
disconnected, tractional force of 100 N (1 kp + 9.81 N) and max. torsional
stress 2.5 Nm
1
2
3
L1
N Max. 16 A
230/400 V ~ 16 A, 11.1 kW
L2
L3
13
2
L
N Max. 16 A
230 V ~ 16 A, 3.7 kW
L1
N Max. 16 A
230 V ~ 16 A, 3.7 kW
L2
L3
Installation notes for 3-CIRCUIT TRACKS
INSTALLATION OF THE MULTIADAPTER
1 Insert the Multiadapter in the track.
2 Turn the mechanical mounting pin clockwise.
3 Select the required phase with the phase selector pin.
To remove the Multiadapter from the track, turn the phase selector to
the OFF position, then turn the mechanical mounting pin anti-clockwise.
1 2 3
1 Circuit
3 Circuits
3 Phases
3 CIRCUITS Track systems
328
Ultra low profile, surface mounted 1-circuit track.
Mains voltage (16 A at 230 V).
25
15
35
1-circuit trackfor surface mounting
0.02112.00 l. mm 2000
0.02113.00 l. mm 3000
Finishes: .10 .21
Adapter with nipples
0.02131.00
Finishes: .10 .21
Live end
0.02120.00
Finishes: .10 .21
Straight connector
0.02121.00
Finishes: .10 .21
L-Coupler
0.02123.00
Finishes: .10 .21
X-Coupler
0.02125.00
Finishes: .10 .21
End cap
0.02122.00
Finishes: .10 .21
T-Coupler
0.02124.00
Finishes: .10 .21
Adapter features:
Protection class
Track systems 1 CIRCUIT
Ultra low profile
www.reggiani.net/codice per accedere alla scheda tecnica di prodotto.La rapida evoluzione tecnologica del LED fa si che le sue prestazioni siano costantemente in evoluzione. I dati tecnici esposti sono aggiornati al Marzo 2012. Consultate le schede tecniche ON LINE per le specifiche attuali.
329
3 ACCENSIONI Track systemsDa sospensione
NEXT- Oxford Street - London, Great Britain
330
331
PENDANTS
Pendants are used for soft
ambient lighting or directed
lighting in areas of any size.
Their installation position
makes them extremely visible
so pendants must combine
technical qualities with
appealing aesthetics that fits
in well with any setting they
are installed in. The Reggiani
product range offers excellent
pendant models by great
architects and designers to
suit all lighting needs.
SPECTRA
LOROSAE
MAANTIS
B&S
PASIOS
ph
oto
: L
uc B
oe
gly
Biblioteca Universitaria Lettere e Scienze Umanitarie - Brest - Architetti Emanuelle e Laurent Beaudouin
332
Spectra PENDANTS
Pendant
SpectraUnderstatement and
minimalism translate into
linear light.
Spectra.
An indisputably elegant
pendant that encompasses
evolved technologies in a
minimal design.
Its arched shape becomes
even more invisible when it
is suspended in the setting,
radiating its powerful,
comfortable light provided by
its over 616 high efficiency
LEDs. ( 96)
Design: D’Alesio&Santoro
333
PENDANTS SpectraPendant
Pendant with extruded aluminium structure only 13 mm thick,
slightly curved and hanging from cables (3000 mm). Prismatic
safety shield with special optical films that can focus the light beam
from over
616 high efficiency LEDs, 48W 2957lm (62lm/W), with colour
temperature of 3900 K (bin selected), CRI ›85.
Constant current driver housed in the ceiling.
Code: 0.25000.00
Standard finish: 28 metallised grey
3000
901620
800
65
IP 40
333Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
L’Orologeria Roma
334
Lorosae PENDANTS
Pendant
Design: Álvaro Siza
LorosaeCreated in 1999 to light an
exhibition of his work in the
Basilica Palladiana, Vicenza,
Lorosae has the same
classic harmonious beauty
as Palladian architecture.
Its essentially pure forms
rise above time and fashion
and can naturally fit into and
embellish settings of any
architectural style.
Lorosae retains all its charm
and beauty derived from the
outstanding perfection of
its proportions in each of its
many models and sizes.
The Lorosae versions:
pendant and wall mounted
luminaire, in methacrylate
or blown glass; it comes in
four different sizes and five
different colours.
335
PENDANTS LorosaePendant
Álvaro Joaquim Melo Siza Vieira
was born in Matosinhos, Portugal,
in 1933.
From 1949-55 he studied at the
School of Architecture, University
of Porto (ESBAP).
His first project was finished in
1954.
From 1955-58 he worked with the
architect Fernando Távora.
In 1976 he was appointed
Professor of Construction at
ESBAP.
He has been Visiting Professor in
Lausanne, Bogotá and Harvard.
He lives in Porto.
Compagnia di San Paolo - Torinofo
to G
uid
o S
ivie
ro
336The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Lorosae PENDANTS
Pendant
LorosaePendant with methacrylate diffuser and built-in control gear technology for mains voltage halogen lamps and metal halide lamps
ø 700
ø 242
400
250
5000
30
HIE / E27 QT-32 / E27
1x150 Watt 1x250 Watt
2x58° 0. 02990.00
0. 02987.00
337Visit www.reggiani.net/code to access the product datasheet.
PENDANTS LorosaePendant
LorosaePendant with built-in control gear technology for halogen lamps, incandescent lamps, single-ended metal halide lamps and compact fluorescent lamps
Blown glass diffuser Methacrylate diffuser
10 white 10 white 74 blue 75 green 77 red 84 orange
280
1700
HSGS-GLS / E27
1x100 Watt
Methacrylate diffuser
2x49° 0. 02992.00
Blown glass diffuser
2x49° 0. 02982.00
190
1700
Methacrylate diffuser
2x48° 0. 02991.00
Blown glass diffuser
2x48° 0. 02981.00
1700
HIE / E27 HSGS-GLS / E27 TC-TE / GX24q-3 TC-TE / GX24q-4 TC-TE / GX24q-5
1x70 Watt 1x100 Watt 1x26 / 32 Watt 1x42 Watt 1x57 Watt
Methacrylate diffuser
2x50° 0. 02989.00
2x49° 0. 02993.00
2x54°/ 2x57° 0. 02994.00
2x57° 0. 02988.00
Version:Dimmable (1-10V DC)
2x57° 0. 02979.00
0. 02969.00
Blown glass diffuser
2x50° 0. 02986.00
2x49° 0. 02983.00
2x54°/ 2x57° 0. 02984.00
0. 02968.00
2x57° 0. 02985.00
Version:Dimmable (1-10V DC)
2x57° 0. 02980.00
338
Maantis PENDANTS
Pendant
Design: Rogers Stirk Harbour + Partners
Maantis“Our initial concept was to
see the technical lighting
system as a creature; to
produce an object that
was luminous, whether
it was on or off (...), an
object throbbing with life
(...). I believe Maantis is a
benchmark in the design of
office lighting but it is also a
beautiful design object that
people could want for their
own homes.
Beautiful, yes, but also
incredibly functional.”
Richard Rogers
Openly inspired by the
incredible forms of the
Manta ray and the iridescent
colours of deep sea fish,
Maantis harmonises
aesthetic values and
high-tech content, as a
testimonial of how it is
possible to have everything
in one, without needing to
make choices or relinquish
anything.
339
PENDANTS MaantisPendant
Maantis comes in three
lengths and a number
of versions and is
unsurpassable for lighting
and decorating any setting.
A special accessory makes it
possible to connect up to six
Maantis luminaires in line to
create a more than 10-metre
long pendant light sculpture.
Sir Richard Rogers was born in Florence in 1933 and made his name designing emblematic buildings such as the Pompidou Centre, Lloyd’s of London, the European Court of Human Rights in Strasbourg and the London Millennium Dome.His studio, Rogers Stirk Harbour + Partners (RSHP) has offices in London, Barcelona, Madrid and Tokyo.One of his most recent prominent designs is the new tower for the World Trade Center, New York.
Ristopasto Cosenza
340The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Maantis PENDANTS
Pendant
Maantis Pendant with direct/indirect light distribution
Short
554
1080
124
T5 / FH - FQ
2x21 / 2x39 Watt
provision for DALI
RGB LED circuit
0.20800.00
0.20853.00
Short + 1 adjustable projector
1113
200
850
33
T5 / FH - FQ
2x21 / 2x39 Watt
provision for DALI
RGB LED circuit
CDM-TC / G8.5 QR111 / G53
1x35 Watt 1x65 Watt
0.20801.00
0.20854.00
0.20802.00
0.20855.00
Medium
1380
554
124
T5 / FH - FQ
2x28 / 2x54 Watt
provision for DALI
RGB LED circuit
0.21100.00
0.21160.00
Medium + 1 adjustable projector
1413
1150
200
33
T5 / FH - FQ
2x28 / 2x54 Watt
predisposto per DALI
circuito LEDs RGB
CDM-TC / G8.5 QR111 / G53
1x35 Watt 1x65 Watt
0.21101.00
0.21161.00
0.21103.00
0.21163.00
341Visit www.reggiani.net/code to access the product datasheet.
PENDANTS MaantisPendant
Maantis Pendant with direct/indirect light distribution
Long
554
124
1680
T5 / FH - FQ
2x35 / 2x49 Watt
provision for DALI
RGB LED circuit
0.21400.00
0.21460.00
T5 / FH - FQ
2x80 Watt
provision for DALI
RGB LED circuit
0.21550.00
0.21609.00
Long + 1 adjustable projector
1450
200
331713
T5 / FH - FQ
2x35 / 2x49 Watt
provision for DALI
RGB LED circuit
CDM-TC / G8.5 QR111 / G53
1x35 Watt 1x70 Watt 1x65 Watt
0.21401.00
0.21461.00
0.21403.00
0.21463.00
0.21402.00
0.21462.00
T5 / FH - FQ
2x80 Watt
provision for DALI
RGB LED circuit
CDM-TC / G8.5 QR111 / G53
1x35 Watt 1x70 Watt 1x65 Watt
0.21551.00
0.21610.00
0.21553.00
0.21612.00
0.21552.00
0.21611.00
342
B&S PENDANTS
Pendant
Design: Brombini & Saccardo
B&SFruit of a project by
architects Brombini &
Saccardo, B&S is a pendant
with a vaguely Bauhaus-
inspired line designed for
large spaces.
The fins on the aluminium
body perform both an
aesthetic and a heat
dissipation function, while
the reflector with its minimal
design very effectively lights
the space below.
The methacrylate reflector
gives the added option of
diffused lighting as well as
direct lighting.
The perfect use for B&S IP55
is in large settings with high
ceilings – shopping centres,
lofts and showrooms.
343
B&SIP55 pendant with built-in control gear technology for metal halide lamps and single-ended sodium vapour lamps
597
ø 605
300
ø185
3000
ST / E40 ST MT / E40 QT32 / E27
1x100 Watt 1x150 Watt 1x250 Watt 1x250 Watt
Reflector made from white lacquered aluminium
2x32° 0. 02910.EV
2x33° 0. 02911.EV
2x32° 0. 02912.EV
2x32° 0. 02913.EV
Diffuser made from opal white methacrylate
2x36° 0. 02933.EV
2x37° 0. 02934.EV
2x39° 0. 02935.EV
2x36° 0. 02936.EV
343Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
344
Pasios PENDANTS
Pendant
Design: Fabio Reggiani
Unmistakeable and original
projector, the distinguishing
feature of Pasios is its
singular fan shape.
Its exceptional control of
light and high degree of
protection (up to IP66) make
it suitable for safe use in any
setting.
Pasios can be enriched by
an optional bright diffuser
formed of a metal structure
and sixteen coloured or
transparent polycarbonate
segments to enhance and
restyle the essential design
of the projector.
Pasios
See a description of the Pasios
surface-mounted projector in the
Exterior luminaires section.
345
PENDANTS PasiosPendant
The unusual configuration of the diffuser gives designers the possibility of composing the desired colour.
The diffuser is made up of the metal structure and sixteen segments (eight top and eight bottom).
346
347
TAILOR-MADE PRODUCTS
The universe of a business
organisation spins about
a central sun populated
by designers, architects,
technicians and customers.
Thanks to a network of
internal connections, the
contributions of each of
these individuals are all
interrelated. These complex
information flows can be
characterised in the form
of a relational platform.
And it is precisely this
intensive system of
connections between the
various actors of the design
process, this regime of
collective processing,
that gives rise to “RE
Link” by Reggiani.
“RE Link” is a robust and
structured expression of
Reggiani’s ability and desire
to extend its skills in the
construction of proactive
relations, surrounding itself
with diverse knowledge
resources, and penetrating
new design capabilities.
“RE Link” denotes the
ability to consistently find
solutions targeted to meet
specific requirements,
identifying new
implementation paths that
are capable of responding
adequately to parameters
of effectiveness,
environmental
compatibility and safety.
It is here that Reggiani’s
scientific skills are brought
to bear in an elegant and
flexible manner to generate
personalised solutions.
The approach to light and
the method of construction
of partnerships is
exemplified by the retail
environment: the light
utilised in each commercial
sector is never a random
choice but is instead the
result of careful planning
and collaboration.
Reggiani is an important
player in this context
and can offer a range of
competences: technical
support and lighting
technology consultancy,
solutions that can optimise
quality, efficiency and
running costs, through to
the design and realisation
of custom-built luminaires
in compliance with
comfort parameters and
energy regulations in the
country of operation.
348
Linea Luce LED RECESSED LUMINAIRES
Modular recessed lighting system
Palazzo di Propaganda Fide
Modular recessed lighting system
349
RECESSED LUMINAIRES Linea Luce LEDModular pendant lighting system
350The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Linea Luce LED RECESSED LUMINAIRES
Modular recessed lighting system
In order to achieve the desired lighting configuration, when ordering it is necessary to indicate the codes for: the recessed lighting segments of Linea Luce, the coupler, the end covers and the relative driver.
31500
Linea Luce, length. 602 mm
31520
Linea Luce, length 1202 mm
31545
Coupler
31540End cover
31547Diffuser
31540
End cover
Configuration example
Quick-fit
plug
Diffuser
Linea Luce LED Modular recessed lighting segments with LEDs.
IP20
IP4333mm
Linea Luce,
length. 602 mm
L. 602 36
36 25 3000K
CRI 85
4000K
CRI 85
RGB LEDs
Watt Driver Device to control RGB LEDs
Driver
15 0.31500.WW 0.31500.NN 0.31550.00
0.31630.00 0.31631.00 0.31632.007,5 0.31505.WW 0.31505.NN 0.31550.00
12 0.31600.00 0.31550.00
L. 802 36
36 25Watt Driver Device to control RGB LEDs
Linea Luce,
length. 802 mm
20 0.31510.WW 0.31510.NN 0.31550.00
0.31630.00 0.31631.00 0.31632.00Driver 10 0.31515.WW 0.31515.NN 0.31550.00
16 0.31605.00 0.31550.00
L. 1202 36
36 25Watt Driver Device to control RGB LEDs
Linea Luce,
length. 1202 mm
30 0.31520.WW 0.31520.NN 0.31555.00
0.31630.00 0.31631.00 0.31632.00Driver 15 0.31525.WW 0.31525.NN 0.31550.00
24 0.31610.00 0.31555.00
L. 2402 36
36 25Watt Driver Device to control RGB LEDs
Linea Luce,
length. 2402 mm
60 0.31530.WW 0.31530.NN 0.31555.00
0.31630.00 0.31631.00 0.31632.00Driver 30 0.31535.WW 0.31535.NN 0.31555.00
48 0.31615.00 0.31555.00
Linea Luce LED Complementary elements
Module,
length 50 mmL. 50
36
36 25Watt
2 0.31450.WW 0.31450.NN
1,5 0.31455.WW 0.31455.NN
Module,
length 100 mmL.100
36
36 252,5 0.31460.WW 0.31460.NN
1,5 0.31465.WW 0.31465.NN
Corner module
L. 3536
35 251 0.31470.WW 0.31470.NN
0,5 0.31475.WW 0.31475.NN
351Visit www.reggiani.net/code to access the product datasheet.
RECESSED LUMINAIRES Linea Luce LEDModular recessed lighting system
End coverTwo end covers included in every pack
Diffuserlength 3000 mm
0.31540.00 0.31547.00
We recommend positioning the shield as shown
Coupler to join two or more Linea Luce lighting segments together
0.31545.00
Control gear technologyDriver: electronic, 100-240V 50/60Hz out 24VDC
0.31550.00 100-240V 50/60Hz out 24Vcc 20W 0.31565.00 Emergency pack, max 30W
0.31555.00 100-240V 50/60Hz out 24Vcc 100W 0.31560.00 DALI/SWITCH DIM device to install between driver
and LED module, max 120W
Linea Luce, RGB LEDs
230 V AC
L +
+B (-)G (-)R (-)
RGB LED-module
LED
LED
-
DALI
RGB-DALI
NDriver20/100W
Driver20/100W
Driver20/100W
31631Blue
31631Green
31632DMX
316301-10V
31631Red
Interface device to control RGB LEDs
Watt
0.31630.0000 48 1-10V
0.31631.0000 48 DALI 1 for each colour
0.31632.0000 48 DMX
Configuration example
352
Linea Luce LED
Linea Luce, length. 602 mm
610x33mm
Configuration example
31500 (15W) 31540
6024mm+ +4mm
31540
ELECTRONIC DRIVER31550 (20W)
Max. distance 300 cm
Linea Luce, length. 1202 mm
1210x33mm
Configuration example
31520 (20W) 31540
12024mm+ +4mm
31540
ELECTRONIC DRIVER31555 (60W)
Max. distance 300 cm
Linea Luce, length. 1802 mm
1812x33mm
Configuration example
31500 (15W)
31545 (15W)
31520 (30W) 31540
12026024mm+ +4mm
31540
ELECTRONIC DRIVER31555 (60W)
Max. distance 300 cm
The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
353
In order to achieve the desired lighting configuration, when ordering it is necessary to indicate the codes for: the pendant lighting segments of Linea Luce, the end covers and the coupler (if necessary).Each luminaire includes:• suspension wires (l. 2000 mm) with ceiling rose (ø 14 mm) and lower friction device.• power supply cable with hidden ( ø 40 mm) ceiling rosette (cut-out ø 33 mm).
39540End cover
39540
End cover
39500
Linea luce
length 600 mm
39520
Linea luce
length 1200 mm
39545
Coupler
31547Diffuser
Configuration example
Diffuser
Linea Luce LED Modular recessed lighting segments with LEDs and driver
600
37
37
79 3000K
CRI 85
4000K
CRI 85
Watt
Linea luce length 600 mm
15 0.39500.WW 0.39500.NN
7,5 0.39505.WW 0.39505.NN
800
37
37
79
Watt
Linea luce length 800 mm 20 0.39510.WW 0.39510.NN
10 0.39515.WW 0.39515.NN
1200
37
37
79
Watt
Linea luce length 1200 mm 30 0.39250.WW 0.39250.NN
15 0.39525.WW 0.39525.NN
2400
37
37
79
Watt
Linea luce length 2400 mm 60 0.39530.WW 0.39530.NN
30 0.39535.WW 0.39535.NN
End coverTwo end covers included in every pack
0.39540.00
Diffuserlength 3000 mm
Coupler to join two or more Linea Luce lighting segments together
0.31547.00 0.39545.00
We recommend positioning the shield as shown
Visit www.reggiani.net/code to access the product datasheet.
PENDANTS Linea Luce LEDModular pendant lighting system
354
Mosaico EasyIOS RECESSED LUMINAIRES
Surface mounted / pendant modular recessed lighting system (trimless or with bezel)
Topshop Topman - New York,, USA
355
RECESSED LUMINAIRES Mosaico EasyIOSSurface mounted / pendant modular recessed lighting system (trimless or with bezel)
Dedon Showroom - Hong Kong
356The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
In order to achieve the desired lighting configuration, the structure is supplied without optical compartments. When ordering, it is necessary to indicate the codes for: the
structure, the body, the IOS optics, the control gear technologies for metal halide lamps or the transformer for 12 V halogen lamps.
Recessed lighting system Configuration example
4081
Back housing with
bezel for 2 optical
compartments
4104
Body with LED LUCE
and driver
35050
LL2 IOS optics
4101
Body for metal
halide lamps
11300
IOS optics
8090
Control gear
Trimless back housing for 1 optical compartment Back housing with bezel for 1 optical compartment Trimless back housing for 2 optical compartment Back housing with bezel for 2 optical compartment
148
157
148
180
157
180 288
148
157
325
180
157
148x148mm 155x155mm 288x148mm 310x155mm
0. 04070.00 0. 04080.00 0. 04071.00 0. 04081.00
Body and optical compartments on pg. 359-360
Mosaico EasyIOS RECESSED LUMINAIRES
Modular recessed lighting system (trimless or with bezel)
357Visit www.reggiani.net/code to access the product datasheet.
4032
End cover
4011
600 mm module
4034Retaining spring
4033
Corner element
4030
Drawn rods
4031
Coupler
4010
300 mm module
4014
Extension
module
4104
Body with LED LUCE
and driver
35050
LL2 IOS optics
11300
IOS optics
8090
Control gear
4101
Body for
metal halide lamps
Configuration example
300 mm module 600 mm module 900 mm module 1200 mm module
160300 145
160600 145
160900 145
1601200 145
Module for max 2 optical compartments Module for max 4 optical compartments Module for max 6 optical compartments Module for max 8 optical compartments
0. 04010.00 0. 04011.00 0. 04012.00 0. 04013.00
Pair of end covers Pair of drawn rods for installation with bezel (length 3000 mm)
ClikFix retainer device (2 pcs) for pair of drawn rods (spacing 350 mm)
Connector (2 pcs)
Finish Finish Finish Finish
0. 04032.00 21 black 0. 04030.00 21 black 0. 04034.00 00 0. 04031.00 00
Extension module from 10 to 130 mm Corner element, 90° Fitting for air conditioning, Ø 100 mm Front cover plate (length 300 mm)
Finish Finish Finish Finish
0. 04014.00 21 black 0. 04033.00 21 black 0. 04091.00 21 black 0.S8567.00 21 black
Front cover plate (length 300 mm) with cut-out for 1 projector
Hinged flap (length 300 mm)
Finish Finish
0.S8568.00 21 black 0.S8409.00 21 black
Body and optical compartments on pg. 355-356
RECESSED LUMINAIRES Mosaico EasyIOSModular recessed lighting system with bezel
358The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
4022
End cover
4011
600 mm module
4023
Corner element
4020
Drawn rods
4021
Coupler
4010
300 mm module
4014
Extension
module
4104
Body with
LED LUCE and
driver
11300
IOS optics
8090
Control gear
4101
Body for metal halide
lamps
35050
LL2 IOS optics
Configuration example
300 mm module 600 mm module 900 mm module 1200 mm module
160300 145
160600 145
160900 145
1601200 145
Module for max 2 optical compartments Module for max 4 optical compartments Module for max 6 optical compartments Module for max 8 optical compartments
0. 04010.00 0. 04011.00 0. 04012.00 0. 04013.00
Pair of end covers Pair of drawn rods for trimless installation (length 3000 mm)
Coupler Extension module from 10 to 130 mm
Finish Finish Finish
0. 04022.00 21 black 0. 04020.00 21 black 0. 04021.00 0. 04014.00 21 black
Corner element, 90° Fitting for air conditioning, Ø 100 mm Front cover plate (length 300 mm) Front cover plate (length 300 mm) with cut-out for 1 projector
Finish Finish Finish Finish
0. 04023.00 21 black 0. 04091.00 21 black 0.S8567.00 21 black 0.S8568.00 21 black
Hinged flap (length 300 mm)
Finish
0.S8409.00 21 black
Body and optical compartments on pg. 355-356
Mosaico EasyIOS RECESSED LUMINAIRES
Trimless modular recessed lighting system
359Visit www.reggiani.net/code to access the product datasheet.
Kit: optical compartment with LED LUCE and control gear technology
IP20
IP20
ø 135
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Driver
Version:Phase cut dimming
0. 04104.HQ 0. 04104.WW 0. 04104.NN
Version:Non-dimmable
0. 04106.HQ 0. 04106.WW 0. 04106.NN
Version:Dimmable (1-10V DC)
V. 04104.HQ V. 04104.WW V. 04104.NN V. 04106.HQ V. 04106.WW V. 04106.NN
Version:DALI dimming
D.04104.HQ D.04104.WW D.04104.NN D.04106.HQ D.04106.WW D.04106.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
0.35054.00 W. W. Mira
Optical compartment for metal halide lamps
IP20
IP40
ø 135
MT / G12 CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x70 Watt 1x150 Watt 1x20 Watt 1x35 Watt 1x70 Watt
Optical compartment 0.04100 .00 0.04101 .00
IOS optics + +CDM-TC / G8.5 CDM-T / G12
0. 03305.00 2x 5°/ 6°/ 7°/ 8° 0.11300.00 2x 7°/ 8°
0. 03306.00 2x15°/11°/12° 0.11301.00 2x17°
0. 03307.00 2x44°/37°/39°/41° 0.11302.00 2x28°/29°
0. 03308.00 W. W. Mira 0.11303.00 W. W. Mira
Control gear
technology +0. 08094.00 HF for metal halide lamps, 20W
0. 08090.00 HF for metal halide lamps, 35W
0. 08096.00 HF for metal halide lamps, 70W
0. 08089.00 HF for metal halide lamps, 150W
RECESSED LUMINAIRES Mosaico EasyIOS
360The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Optical compartment for low voltage halogen lamps with built-in reflector and metal halide lamps
IP20
IP20
ø 135
QR-111 / G53 CDM-R111 / GX8.5
1x65 Watt 1x20 Watt 1x35 Watt 1x70 Watt
Optical compartment 0.04102 .00 0.04103 .00
Control gear
technology
0. 09196.EV Electronic transformer, 100W
0. 08094.00 HF for metal halide lamps, 20W
0. 08090.00 HPF for metal halide lamps, 35W
0. 08096.00 HF for metal halide lamps, 70W
Mosaico EasyIOS RECESSED LUMINAIRES
361Visit www.reggiani.net/code to access the product datasheet.
Topshop Topman - New York, USA
RECESSED LUMINAIRES Mosaico EasyIOS
362
In order to achieve the desired lighting configuration, the structure is supplied without optical compartments. When ordering, it is necessary to indicate the codes: the channel, the end covers, the lamp body, the IOS optics and corresponding control gear technologies. For pendant configurations, when ordering it is also necessary to indicate the codes for the wire set or the rod set.
4131
4171 4171 41724175
2200-2201 4135
4135
125
41304142+4143
Configuration example
4140
4141 4141
4161
3305
4162
35050
4161
3306
4160
11300
162
125600
162
1251200
600 mm module + connectors (2 pcs) 1200 mm module + connectors (2 pcs) End covers (2 pcs) + alignment template included
Coupling plate(for ceiling mounting only, 1 pc)
Finish Finish Finish Finish
0. 04130.00 10 white 21 black 0. 04131.00 10 white 21 black 0. 04135.00 10 white 21 black 0. 04140.00 10 white 21 black
30
20
55
1-circuit track Track control gear Track end cap dead end Track connector
L mm Finish Finish Finish
0. 02200.00 2000 10 white 21 black 0. 02208.00 10 white 21 black 0. 02220.00 10 white 21 black 0. 02211.00
0. 02201.00 3000 10 white 21 black
5000 mm long wire (1 pc) +support plate
Rod device + 5000 mm long wire (1 pc) + support plate
3000 mm long rod conduit (1 pc)
Finish Finish Finish
0. 04141.00 10 white 21 black 0. 04142.00 10 white 21 black 0. 04143.00 10 white 21 black
Mosaico EasyIOS (h. 200) SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM
Surface-mounted and pendant modular lighting system
The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
363Visit www.reggiani.net/code to access the product datasheet.
Body with LED LUCE
IP20
IP20
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Phase cut dimming
0. 04162.HQ 0. 04162.WW 0. 04162.NN
Version:Non-dimmable
0. 04164.HQ 0. 04164.WW 0. 04164.NN
Version:Dimmable (1-10V DC)
V. 04162.HQ V. 04162.WW V. 04162.NN V. 04164.HQ V. 04164.WW V. 04164.NN
Version:DALI dimming
D.04162.HQ D.04162.WW D.04162.NN D.04164.HQ D.04164.WW D.04164.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
0.35054.00 W. W. Mira
Driver with back housing that has provision for mechanical fixing and cable complete with adapter for wiring connection to 1-circuit track.
+0. 04175.00 for RE LED Luce 14W 0. 04176.00 for RE LED Luce 26W
0. 04180.00Emergency pack SA including Ni/Cd battery with 1h back-up
0. 04181.00Emergency pack SA including Ni/Cd battery with 1h back-up
Body for metal halide lamps
IP20
IP40
MT / G12 CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x70 Watt 1x20 Watt 1x35 Watt 1x70 Watt
Body 0.04161 .00 0.04160 .00
IOS optics + +CDM-TC / G8.5 CDM-T / G12
0. 03305.00 2x 5°/ 6°/ 7°/ 8° 0.11300.00 2x 7°/ 8°
0. 03306.00 2x15°/11°/12° 0.11301.00 2x17°
0. 03307.00 2x44°/37°/39°/41° 0.11302.00 2x28°/29°
0. 03308.00 W. W. Mira 0.11303.00 W. W. Mira
Control gear technology HF control gear with back housing that has provision for mechanical fixing and cable complete with adapter for wiring connection to 1-circuit track.
+0. 04170.00 HF for metal halide lamps, 20W
0. 04171.00 HF for metal halide lamps, 35W
0. 04172.00 HF for metal halide lamps, 70W
SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM Mosaico EasyIOS (h. 200)Surface-mounted and pendant modular lighting system
364
In order to achieve the desired lighting configuration, the structure is supplied without optical compartments. When ordering, it is necessary to indicate the codes: the channel, the end covers, the lamp body, the IOS optics and corresponding control gear technologies. For pendant configurations, when ordering it is also necessary to indicate the codes for the wire set or the rod set.
4121
4171 4171 41724175
2200-22014125
4125
200
41204142+4143
Configuration example
4140
4141 4141
4151
3305
4152
35050
4151
3306
4150
11300
162
200600
162
2001200
600 mm module + connectors (2 pcs) 1200 mm module + connectors (2 pcs) End covers (2 pcs) + alignment template included
Coupling plate(for ceiling mounting only, 1 pc)
Finish Finish Finish Finish
0. 04120.00 10 white 21 black 0. 04121.00 10 white 21 black 0. 04125.00 10 white 21 black 0. 04140.00 10 white 21 black
30
20
55
1-circuit track Track control gear Track end cap dead end Track connector
L mm Finish Finish Finish
0. 02200.00 2000 10 white 21 black 0. 02208.00 10 white 21 black 0. 02220.00 10 white 21 black 0. 02211.00
0. 02201.00 3000 10 white 21 black
5000 mm long wire (1 pc) +support plate
Rod device + 5000 mm long wire (1 pc) + support plate
3000 mm long rod conduit (1 pc)
Finish Finish Finish
0. 04141.00 10 white 21 black 0. 04142.00 10 white 21 black 0. 04143.00 10 white 21 black
Mosaico EasyIOS (h. 125) SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM
Surface-mounted and pendant modular lighting system
The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
365
Body with LED LUCE
IP20
IP20
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Phase cut dimming
0. 04152.HQ 0. 04152.WW 0. 04152.NN
Version:Non-dimmable
0. 04109.HQ 0. 04109.WW 0. 04109.NN
Version:Dimmable (1-10V DC)
V. 04152.HQ V. 04152.WW V. 04152.NN V. 04109.HQ V. 04109.WW V. 04109.NN
Version:DALI dimming
D.04152.HQ D.04152.WW D.04152.NN D.04109.HQ D.04109.WW D.04109.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
0.35054.00 W. W. Mira
Driver with back housing that has provision for mechanical fixing and cable complete with adapter for wiring connection to 1-circuit track.
+0. 04175.00 for RE LED Luce 14W 0. 04176.00 for RE LED Luce 26W
0. 04180.00Emergency pack SA including Ni/Cd battery with 1h back-up
0. 04181.00Emergency pack SA including Ni/Cd battery with 1h back-up
Body for metal halide lamps
IP20
IP40
MT / G12 CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x70 Watt 1x20 Watt 1x35 Watt 1x70 Watt
Body 0.04151 .00 0.04150 .00
IOS optics + +CDM-TC / G8.5 CDM-T / G12
0. 03305.00 2x 5°/ 6°/ 7°/ 8° 0.11300.00 2x 7°/ 8°
0. 03306.00 2x15°/11°/12° 0.11301.00 2x17°
0. 03307.00 2x44°/37°/39°/41° 0.11302.00 2x28°/29°
0. 03308.00 W. W. Mira 0.11303.00 W. W. Mira
Control gear technology HF control gear with back housing that has provision for mechanical fixing and cable complete with adapter for wiring connection to 1-circuit track.
+0. 04170.00 HF for metal halide lamps, 20W
0. 04171.00 HF for metal halide lamps, 35W
0. 04172.00 HF for metal halide lamps, 70W
SURFACE-MOUNTED / PENDANT MODULAR LIGHTING SYSTEM Mosaico EasyIOS (h. 125)Surface-mounted and pendant modular lighting system
Visit www.reggiani.net/code to access the product datasheet.
366
Benetton Store, Regent Street - London, Great Britain
Mosaico EasyIOS PENDANTS
367
Store Benetton Regent Street - Londra, Gran Bretagna
PENDANTS Mosaico EasyIOS
368The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Fivespot PENDANT
Pendat
IN ORDER TO ACHIEVE THE DESIRED LIGHTING CONFIGURATION, THE LUMINAIRE IS SUPPLIED WITHOUT INTERCHANGEABLE OPTICS.
When ordering, the luminaire code no. and the LL2 IOS or IOS optics code no. must be indicated.
+
LUMINAIRE
IOS OPTICS
OPTICS
Fivespot Pendant lighting system with 5 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
ø 600
3000
5x14W 5x26W
860lm (x5)
3000K
CRI 90
995lm (x5)
3000K
CRI 85
1100lm (x5)
4000K
CRI 85
2070lm (x5)
3000K
CRI 94
2408lm (x5)
3000K
CRI 85
2535lm (x5)
4000K
CRI 84
Version:Phase cut dimming
0.S8637.HQ 0.S8637.WW 0.S8637.NN
Version:Non-dimmable
0.S9898.HQ 0.S9898.WW 0.S9898.NN
Version:Dimmable (1-10V DC)
V.S9898.HQ V.S9898.WW V.S9898.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
369Visit www.reggiani.net/code to access the product datasheet.
PENDANT FivespotPendat
Fivespot Pendant lighting system with 5 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
ø 600
3000
CDM-T / G12
5x20 Watt 5x35 Watt 5x70 Watt
0.S8638.00 0.S7392.00 0.S8639.00
IOS optics +CDM-T / G12
0.11305.00 2x 6°
0.11306.00 2x11°
0.11307.00 2x37°
0.11308.00 W. W. Mira
370The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Ladder PENDANT
Pendat
IN ORDER TO ACHIEVE THE DESIRED LIGHTING CONFIGURATION, THE LUMINAIRE IS SUPPLIED WITHOUT INTERCHANGEABLE OPTICS.
When ordering, the luminaire code no. and the LL2 IOS or IOS optics code no. must be indicated.
+ + + +LUMINAIRE
IOS OPTICS
OPTICS
Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
155
520
155130
2x14W
860lm (x2 - x4 - x6)
3000K
CRI 90
995lm (x2 - x4 - x6)
3000K
CRI 85
1100lm (x2 - x4 - x6)
4000K
CRI 85
Version:Phase cut dimming
0.S7401.HQ 0.S7401.WW 0.S7401.NN
Pendant lighting system with 4 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
155
1030
155130
4x14W
Version:Phase cut dimming
0.S7801.HQ 0.S7801.WW 0.S7801.NN
Pendant lighting system with 6 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
155
1560
155130
6x14W
Version:Phase cut dimming
0.S8008.HQ 0.S8008.WW 0.S8008.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
0.35054.00 W. W. Mira
371Visit www.reggiani.net/code to access the product datasheet.
PENDANT LadderPendat
Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
155
520
155130
CDM-T / G12
2x20 Watt 2x35 Watt 2x70 Watt
0.S8640.00 0.S5218.00 0.S5219.00
Pendant lighting system with 4 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
155
1030
155130
4x20 Watt 4x35 Watt 4x70 Watt
0.S8300.00 0.S5220.00 0.S5221.00
Pendant lighting system with 6 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
155
1560
155130
6x20 Watt 6x35 Watt 6x70 Watt
0.S8301.00 0.S5222.00 0.S5223.00
IOS optics +CDM-T / G12
0.11305.00 2x 6°
0.11306.00 2x11°
0.11307.00 2x37°
0.11308.00 W. W. Mira
372The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Ladder SURFACE MOUNTED
Surface-mounted lighting system
IN ORDER TO ACHIEVE THE DESIRED LIGHTING CONFIGURATION, THE LUMINAIRE IS SUPPLIED WITHOUT INTERCHANGEABLE OPTICS.
When ordering, the luminaire code no. and the LL2 IOS or IOS optics code no. must be indicated.
++LUMINAIRE
IOS OPTICS
OPTICS
Ladder Surface-mounted lighting system with 2 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
520
155
165
160
200
2x14W
860lm (x2)
3000K
CRI 90
995lm (x2)
3000K
CRI 85
1100lm (x2)
4000K
CRI 85
Version:Phase cut dimming
0.S7398.HQ 0.S7398.WW 0.S7398.NN
Surface-mounted lighting system with 4 optical compartments (adjustable via universal joint), LED LUCE and control gear technology
1200
155
165
160
200
4x14W
860lm (x4)
3000K
CRI 90
995lm (x4)
3000K
CRI 85
1100lm (x4)
4000K
CRI 85
Version:Phase cut dimming
0.S7399.HQ 0.S7399.WW 0.S7399.NN
IOS optics for LED LUCE +
0.35050.00 2x 6°
0.35049.00 2x 8°
0.35051.00 2x11°
0.35052.00 2x15°
0.35053.00 2x26°
0.35054.00 W. W. Mira
373Visit www.reggiani.net/code to access the product datasheet.
SURFACE MOUNTED LadderSurface-mounted lighting system
Ladder Pendant lighting system with 2 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
520
155
165
160
200
CDM-TC / G8.5
2x20W 2x35W 2x70W
0.S8643.HQ 0.S8644.WW 0.S8645.NN
Pendant lighting system with 4 optical compartments (adjustable via universal joint), IOS optics and control gear technology for metal halide lamps
1200
155
165
160
200
CDM-TC / G8.5
2x20W 2x35W 2x70W
0.S8646.HQ 0.S8647.WW 0.S8648.NN
IOS optics +CDM-TC / G8.5
0.11300.00 2x 7° / 8°
0.11301.00 2x17°
0.11302.00 2x28°/29°
0.11303.00 W. W. Mira
374 Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Mirror RE LEDGlass mirror
Mirror RE LEDGlass mirror with two vertical strips of LEDs for a total of 65W + control gear technology
2013 2071
750610
60
60
3°
2x500 LED SMD 24V
4000K
CR= 85
1x65 Watt
0.S8302.00
1200 mm1200 mm
H: 3500
800 mm
100 450 500 550 600 650 700 750 800 lx
375
376
377
EXTERIOR LUMINAIRES
MULTISPOT
ENVIOS
LINDRO
ARGIAK
RIOS
RIOS PLUS
IPERIOS
NARANCIA
ZAGARA
HIBOU
UNITED
JANIOS
PASIOS
CYL LIGHT
FLURE
HILLOCK
MURALE
METAMORPHOSI
OFU
Exterior luminaires need
to withstand adverse
weather conditions and
sometimes even to be
walk-over or drive-over
resistant. The quality,
robustness and degree
of protection are vitally
important for these lighting
bodies. Exterior projectors,
recessed luminaires and
pendants can be used for
both accent and general
lighting of architectural
elements, squares, gardens,
monuments, pathways and
particular environments
like saunas and swimming
pools. The Reggiani product
range offers many reliable
solutions to suit all lighting
needs.
378
Design: Nome Cognome
Multispot 188 EXTERIOR LUMINAIRES
Fixed recessed luminaire
Design: Fabio Reggiani
Multispot 188Multispot is a fixed recessed
luminaire for exterior
lighting or to light areas
that require a high degree
of protection like pathways,
airports, railway stations,
cantilever roofs, stadiums,
parking areas, fuel stations
and swimming pools.
The part recessed into the
false ceiling is fully protected
by the built-in metal back
housing and the pre-wired
control gear has the same
degree of protection.
379
EXTERIOR LUMINAIRES Multipsot 188Fixed recessed luminaire
380
Multispot 188 EXTERIOR LUMINAIRES
Fixed recessed luminaire
Per le versioni IOS ad alogenuri metallici. Per le versioni fluorescenti compatte
Ottica Riflettori IOS Ø130mm, in alluminio purissimo 99.99%, con innesto a baionetta per fasci stretti, medi e larghi.
Riflettore ad alta specularità, in alluminio sfaccettato anodizzato.
Tecnologie di alimentazione Alimentazione elettronica o elettromagnetica per lampade ad alogenuri metallici con tecnologia ceramica.
Alimentazione elettronica EEI=A/A per lampade fluorescento compatte.
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Die-cast aluminium.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90)
BACK HOUSING Metal.
SHIELD Heat treated clear safety glass
(smooth for narrow beams and grainy for medium and wide beams).
INSTALLATION Mollablok patented system for
adjustable fixing into false ceilings up to 35 mm thick.
Integral back housing
Rapid installation with the Mollablok system for fixing into false ceilings up to 35 mm thick.
381381381Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
EXTERIOR LUMINAIRES Multipsot 188Fixed recessed luminaire
Multipsot 188Kit: recessed luminaire with IOS optics and control gear
technology for metal halide lamps
IP66
IP66 ø188mm
ø 212
240
CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt
2x 7° 0.13800.00 0.13805.EV 0.50238.00 0.13810.EV 0.50241.00 0.13815.00
2x11° 0.13801.00 0.13806.EV 0.50239.00 0.13811.EV 0.50242.00 0.13816.00
2x25°/24° 0.13802.00 0.13807.EV 0.50240.00 0.13812.EV 0.50243.00 0.13817.00
Multipsot 188Fixed recessed luminaire with control gear technology for compact fluorescent lamps
IP66
IP66 ø188mm
ø 212
240
TC-TE / GX24q-3
1x26 Watt
2x56° 0. 08257.EV
382
Design: Nome Cognome
Envios PROJECTORS
Projector
Design: L. A. P. D.
Enviosvarious applications: on
suspension cables, poles,
walls, adjustable brackets,
branches, piers and earth
spikes.
You can’t get more versatile
than this.
ROBUST AND VERSATILE
EXTERIOR PROJECTOR.
High performance, with
plenty of variations to
perfectly adapt to design
demands and a degree of
protection (IP66) that also
makes it extremely resistant
to the elements (from -20° to
+35°C).
These are the features of
Envios, family of exterior
luminaires with RE LED
Luce.
Reggiani and L.A.P.D.
Studio worked together on a
lighting design solution for
a specific urban context –
Woolwich Squares, London
– and came up with Envios
for exteriors, which is now a
range of luminaires that can
perfectly meet the complex
conditions required for
lighting outdoor spaces.
Envios comes in surface-
mounted versions and also
has a series of accessories
so it can be used in
383
PROJECTORS EnviosProjector
Woolwich Squares - London, UK
384
Envios PROJECTORS
Projector
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Die-cast aluminium; it is fitted with
a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
IOS OPTICAL SYSTEM IOS system (Interchangeable Optical System) A full range of beams and high
efficiency (up to 90). Structure and LL2/LL4 optics in anti-
static metallised polycarbonate with scratch resistant protective coating. Integral satin shield; the combination
of innovative materials and surface treatments ensure that this shield maintains good light emission.
SAFETY SHIELD Extra-light, tempered safety glass;
resistant to temperature and mechanical shock (IK 03 / IK 07).
INSTALLATION Surface-mounted projectors; loop-in/
loop-out facility with pre-wired power supply cable for cascade connection.
Installation on suspension cables, poles, walls, adjustable brackets, branches, piers and earth spikes. See page
DEGREE OF PROTECTION IP66
Integral shield that maintains good light emission to produce a uniform light beam
Cooling fins for optimum heat dissipation
Loop-in/loop-out facility for cascade connection.
898,3 cm2 1498,4 cm2 1498,4 cm2
Surface exposed to wind
385
PROJECTORS EnviosProjector
Envios
RE LED LUCE incorporates the best high efficiency LEDs (up to 4400 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Optics IOS reflectors with Ø 50 mm (LL1) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).
IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version.
Four IOS reflectors (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
For Re Led Luce 3W • Non-dimmable driver (120-240V AC/DC).
For Re Led Luce 37W • Non-dimmable driver (220-240V AC/DC).
For Re Led Luce 14W • Non-dimmable driver (120 or 240V AC/DC): Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage halogen lamps, for luminous intensity adjustment from 100% to 30%.
For Re Led Luce 4x14W • Non-dimmable driver (120 or 240V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
For Re Led Luce 26W • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
Emergency lighting Emergency packs for exterior installation available on request.
386
Envios PROJECTORS
Projector
EnviosAdjustable projector with IOS optics, LED LUCE and control gear technology
154
ø 84144
1x3W 1x7W
180lm
3000K
CRI 85
197lm
4000K
CRI 85
650lm
3000K
CRI 90
810lm
3000K
CRI 83
860lm
4000K
CRI 83
Version:Non-dimmable
2x 7° 0.30681.WW 0.30681.NN 0.30686.HQ 0.30686.WW 0.30686.NN
2x15° 0.30682.WW 0.30682.NN 0.30687.HQ 0.30687.WW 0.30687.NN
2x24° 0.30683.WW 0.30683.NN 0.30688.HQ 0.30688.WW 0.30688.NN
With base plate
154
ø 84
Version:Non-dimmable
2x 7° 0.30691.WW 0.30691.NN 0.30696.HQ 0.30696.WW 0.30696.NN
2x15° 0.30692.WW 0.30692.NN 0.30697.HQ 0.30697.WW 0.30697.NN
2x24° 0.30693.WW 0.30693.NN 0.30698.HQ 0.30698.WW 0.30698.NN
The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
387
PROJECTORS EnviosProjector
EnviosFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
190
ø 126
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Phase cut dimming
2x 6° 0.30701.HQ 0.30701.WW 0.30701.NN
2x 8° 0.30702.HQ 0.30702.WW 0.30702.NN
2x11° 0.30703.HQ 0.30703.WW 0.30703.NN
2x15° 0.30704.HQ 0.30704.WW 0.30704.NN
2x26° 0.30705.HQ 0.30705.WW 0.30705.NN
Version:Dimmable (1-10V DC)
0.30711.HQ 0.30711.WW 0.30711.NN
0.30712.HQ 0.30712.WW 0.30712.NN
0.30713.HQ 0.30713.WW 0.30713.NN
0.30714.HQ 0.30714.WW 0.30714.NN
0.30715.HQ 0.30715.WW 0.30715.NN
EnviosFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
253
ø 226
4x14W
3440lm
3000K
CRI 90
3980lm
3000K
CRI 85
4400lm
4000K
CRI 85
Version:Non-dimmable
2x 9° 0.30751.HQ 0.30751.WW 0.30751.NN
2x11° 0.30752.HQ 0.30752.WW 0.30752.NN
2x16° 0.30753.HQ 0.30753.WW 0.30753.NN
2x21° 0.30754.HQ 0.30754.WW 0.30754.NN
2x36° 0.30755.HQ 0.30755.WW 0.30755.NN
Version:Dimmable (1-10V DC)
2x 9° 0.30781.HQ 0.30781.WW 0.30781.NN
2x11° 0.30782.HQ 0.30782.WW 0.30782.NN
2x16° 0.30783.HQ 0.30783.WW 0.30783.NN
2x21° 0.30784.HQ 0.30784.WW 0.30784.NN
2x36° 0.30785.HQ 0.30785.WW 0.30785.NN
Visit www.reggiani.net/code to access the product datasheet.
388The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Envios PROJECTORS
Projector
Envios - Accessories Ø 85mm Ø 126mm Ø 226mm
The codes provided in this table only apply to the matching accessory to request together with the projector (see page 000) for the desired installation.
Example:
Projector Accessory
30681 + 30800
Bracket Base plate
Surface mounting See page 000
See page 000
See page 000
See page 000
Adjustable bracket for wall mounting
standard 0.30793.00 0.30794.00
Rigid bracket for wall mounting
0.30791.00 0.30792.00
Extended arm 0.30800.00
Connecting device for cable attachment
0.30725.00
Connecting system for pole attachment of one projector (diameter of 60 mm to 120 mm).
0.30735.00 for 1 projector
Connecting system for pole attachment of two projectors (diameter of 60 mm to 120 mm).
0.30736.00 for 2 projectors
389Visit www.reggiani.net/code to access the product datasheet.
PROJECTORS EnviosProjector
Envios - Accessory Ø 85mm Ø 126mm Ø 226mm
Bracket Base plate
Kit for installation of projector on branches and piers
0.30795.00
Earth spike for in-ground installation
0.30796.00 0.30796.00
to use together with bracket, code 0.30791.00
Stand: surface mounting in-ground mounting
0.30797.000.30798.00
Anti-glare attachment 0.30730.00 0.30731.00
Anti-glare louvre 0.30739.00 0.30741.00 0.30740.00
Fresnel lens 0.30732.00 0.30733.00
3079730798
390
Lindro IP66 PROJECTORS
Projector
Design: Fabio Reggiani
Lindroin projects where distinctive
wall washer lighting is
required.
Lindro can be attached to
a practical mobile bracket
(available separately) for
adjustment, making it
extremely versatile to light
buildings, swimming pools,
gyms, transport stations,
shopping centres, museums
and churches.
Lindro is a surface-mounted
projector with two shapes –
modern square and classic
round – and two sizes. The
high degree of protection
(IP66) combined with LED
technology means Lindro
can withstand harsh outdoor
weather conditions (from
–20° to +35°C) or particular
indoor settings that require a
high degree of protection.
The larger size houses four
LED LUCE LL4 elements (14
or 26 W); the smaller size
houses a single LED LUCE
LL2 (14, 26 or 39 W).
The excellent quality and
effi ciency of LED LUCE
and the wide range of light
beams available make
this luminaire suitable for
general or accent lighting in
small and/or large spaces,
with standard and/or
exceptional heights.
A version with asymmetric
optics including LED LUCE
LL5 completes the range,
enabling design continuity
50_lindro_est_2012.indd 390 07/04/12 17:44
391
IP66 PROJECTORS LindroProjector
StatOil Petrolstation - Drammen, Norway
392
Lindro IP66 PROJECTORS
Projector
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Die-cast aluminium; it is fitted with
a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
OPTICAL SYSTEM Structure and four LL4 optics or LL5 Wall Washer optics in anti-
static metallised polycarbonate with scratch resistant protective coating.
SHIELD Integral and satin for very narrow,
narrow, medium, medium-wide and wide beams; satin with clear glass central lenses for the Wall Washer Mira version.
SAFETY SHIELD
Extra-light, tempered safety glass; resistant to temperature and mechanical shock.
LL2/LL7: IK03; LL4: IK05
OPTICS IOS system (Interchangeable Optical System) A full range of beams and high
efficiency (up to 90).
INSTALLATION Surface mounted; loop-in/loop-out
facility with pre-wired power supply cable for cascade connection.
LINDRO can be attached to a practical mobile bracket (available separately) for adjustment, making it extremely versatile.
AISI 316 stainless steel bracket for ceiling, wall or ground installation
ASYMMETRIC LIGHT
Loop-in/loop-out facility for cascade connection.
Heat sink for optimum heat dissipation
Integral shield to position on the optics unit to soften the light beam
393
IP66 PROJECTORS LindroProjector
Lindro
RE LED LUCE incorporates the best high efficiency LEDs (up to 10140 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Optics IOS reflectors with Ø 80 mm (LL2 and LL7) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version.
Four IOS reflectors with Ø 80 mm (LL4) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is satin for narrow, medium and wide beams; satin with clear glass lenses for the Wall Washer Mira version. There are also versions with gold optics.
Wall Washer optics for asymmetric light distribution made from metallised polycarbonate with scratch resistant protective coating.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
For Re Led Luce 14W • Driver (120 or 240V AC/DC) with standard dimmer: Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage halogen lamps, for luminous intensity adjustment from 100% to 30%.
For Re Led Luce 26W • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
For Re Led Luce 39W • Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
For Re Led Luce 2x14W • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.
For Re Led Luce 4x14W • Non-dimmable driver (220/240V).• Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.
For Re Led Luce 4x26W • Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.
394The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Lindro IP66 PROJECTORS
Projector
LindroFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
111
160
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Phase cut dimming
2x 6° 0.30460.HQ 0.30460.WW 0.30460.NN
2x 8° 0.30461.HQ 0.30461.WW 0.30461.NN
2x11° 0.30462.HQ 0.30462.WW 0.30462.NN
2x15° 0.30463.HQ 0.30463.WW 0.30463.NN
2x26° 0.30464.HQ 0.30464.WW 0.30464.NN
W. W. Mira 0.30465.HQ 0.30465.WW 0.30465.NN
Version:Dimmable (1-10V DC)
2x 6° 0.30470.HQ 0.30470.WW 0.30470.NN
2x 8° 0.30471.HQ 0.30471.WW 0.30471.NN
2x11° 0.30472.HQ 0.30472.WW 0.30472.NN
2x15° 0.30473.HQ 0.30473.WW 0.30473.NN
2x26° 0.30474.HQ 0.30474.WW 0.30474.NN
W. W. Mira 0.30475.HQ 0.30475.WW 0.30475.NN
LindroFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
ø 160
111
1x14W 1x26W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
Version:Phase cut dimming
2x 6° 0.30160.00 0.30160.WW 0.30160.NN
2x 8° 0.30161.00 0.30161.WW 0.30161.NN
2x11° 0.30162.00 0.30162.WW 0.30162.NN
2x15° 0.30163.00 0.30163.WW 0.30163.NN
2x26° 0.30164.00 0.30164.WW 0.30164.NN
W. W. Mira 0.30165.00 0.30165.WW 0.30165.NN
Version:Dimmable (1-10V DC)
2x 6° 0.30170.HQ 0.30170.WW 0.30170.NN
2x 8° 0.30171.HQ 0.30170.WW 0.30171.NN
2x11° 0.30172.HQ 0.30170.WW 0.30172.NN
2x15° 0.30173.HQ 0.30170.WW 0.30173.NN
2x26° 0.30174.HQ 0.30170.WW 0.30174.NN
W. W. Mira 0.30175.HQ 0.30170.WW 0.30175.NN
395Visit www.reggiani.net/code to access the product datasheet.
IP66 PROJECTORS LindroProjector
71x39W
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x11° 0.30480.WW 0.30480.NN
2x15° 0.30481.WW 0.30481.NN
2x18° 0.30482.WW 0.30482.NN
2x20° 0.30483.WW 0.30483.NN
2x34° 0.30484.WW 0.30484.NN
71x39W
3955lm
3000K
CRI 82
4295lm
4000K
CRI 82
2x11° 0.30180.WW 0.30180.NN
2x15° 0.30181.WW 0.30181.NN
2x18° 0.30182.WW 0.30182.NN
2x20° 0.30183.WW 0.30183.NN
2x34° 0.30184.WW 0.30184.NN
396The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Lindro IP66 PROJECTORS
Projector
LindroFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
111
300
4x14W 4x26W
3440lm
3000K
CRI 90
3980lm
3000K
CRI 85
4400lm
4000K
CRI 85
8280lm
3000K
CRI 94
9632lm
3000K
CRI 85
10140lm
4000K
CRI 84
Version:Phase cut dimming
2x 8° 0.30635.HQ 0.30635.WW 0.30635.NN
2x12° 0.30636.HQ 0.30636.WW 0.30636.NN
2x17° 0.30637.HQ 0.30637.WW 0.30637.NN
2x25° 0.30638.HQ 0.30638.WW 0.30638.NN
2x37° 0.30639.HQ 0.30639.WW 0.30639.NN
W. W. Mira 0.30640.HQ 0.30640.WW 0.30640.NN
Version:Dimmable (1-10V DC)
2x 8° 0.30560.HQ 0.30560.WW 0.30560.NN 2x10° 0.30660.HQ 0.30660.WW 0.30660.NN
2x12° 0.30561.HQ 0.30561.WW 0.30561.NN 2x12° 0.30661.HQ 0.30661.WW 0.30661.NN
2x17° 0.30562.HQ 0.30562.WW 0.30562.NN 2x17° 0.30662.HQ 0.30662.WW 0.30662.NN
2x25° 0.30563.HQ 0.30563.WW 0.30563.NN 2x23° 0.30663.HQ 0.30663.WW 0.30663.NN
2x37° 0.30564.HQ 0.30564.WW 0.30564.NN 2x35° 0.30664.HQ 0.30664.WW 0.30664.NN
W. W. Mira 0.30565.HQ 0.30565.WW 0.30565.NN W. W. Mira 0.30665.HQ 0.30665.WW 0.30665.NN
LindroFixed projector with IOS optics, LED LUCE and control gear technology
Surface-mounted version
ø 300
111
4x14W 4x26W
3440lm
3000K
CRI 90
3980lm
3000K
CRI 85
4400lm
4000K
CRI 85
8280lm
3000K
CRI 94
9632lm
3000K
CRI 85
10140lm
4000K
CRI 84
Version:Phase cut dimming
2x 8° 0.30320.HQ 0.30320.WW 0.30320.NN
2x12° 0.30321.HQ 0.30321.WW 0.30321.NN
2x17° 0.30322.HQ 0.30322.WW 0.30322.NN
2x25° 0.30323.HQ 0.30323.WW 0.30323.NN
2x37° 0.30324.HQ 0.30324.WW 0.30324.NN
W. W. Mira 0.30325.HQ 0.30325.WW 0.30325.NN
Version:Dimmable (1-10V DC)
2x 8° 0.30300.HQ 0.30300.WW 0.30300.NN 2x10° 0.30330.HQ 0.30330.WW 0.30330.NN
2x12° 0.30301.HQ 0.30301.WW 0.30301.NN 2x12° 0.30331.HQ 0.30331.WW 0.30331.NN
2x17° 0.30302.HQ 0.30302.WW 0.30302.NN 2x17° 0.30332.HQ 0.30332.WW 0.30332.NN
2x25° 0.30303.HQ 0.30303.WW 0.30303.NN 2x23° 0.30333.HQ 0.30333.WW 0.30333.NN
2x37° 0.30304.HQ 0.30304.WW 0.30304.NN 2x35° 0.30334.HQ 0.30334.WW 0.30334.NN
W. W. Mira 0.30305.HQ 0.30305.WW 0.30305.NN W. W. Mira 0.30335.HQ 0.30335.WW 0.30335.NN
397Visit www.reggiani.net/code to access the product datasheet.
IP66 PROJECTORS LindroProjector
LindroFixed projector with IOS optics, LED LUCE and control gear technology
5Surface-mounted version
111
300
2x14W
1720lm
3000K
CRI 90
1990lm
3000K
CRI 85
2200lm
4000K
CRI 85
Version:Phase cut dimming
Asymmetric 0.30570.HQ 0.30570.WW 0.30570.NN
LindroFixed projector with IOS optics, LED LUCE and control gear technology
5Surface-mounted version
ø 300
111
2x14W
1720lm
3000K
CRI 90
1990lm
3000K
CRI 85
2200lm
4000K
CRI 85
Version:Phase cut dimming
Asymmetric 0.30310.HQ 0.30310.WW 0.30310.NN
398
Design: Nome Cognome
Argiak IP65 PROJECTORS
Fixed / adjustable projector
Design: Fabio Reggiani
Argiakrequires; the track-mounted
version is a great choice for
Hi-Tech settings.
Essential, transparent
design, practical, functional
and with a high degree of
protection (IP65) – these
are the features of this
extended family of projectors
with two or four optical
compartments.
The die-cast aluminium
body accommodates the
optics, which are enclosed
and protected by the integral
ultra-clear anti-static
polycarbonate back housing.
Thanks to the excellent
quality of the most innovative
RE LED LUCE light sources
and the high efficiency of the
LL2 optics, Argiak can be
used both in exteriors and in
dusty and/or damp interiors
(garages, cellars, porticoes,
etc.) as well as anywhere
a high-performance, low-
maintenance luminaire
is required. Installed on
walls, cornices or ceilings,
Argiak comes in the fixed
or adjustable versions –
whatever the lighting design
399
IP65 PROJECTORS ArgiakFixed / adjustable projector
400
Argiak IP65 PROJECTORS
Fixed / adjustable projector
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY The structure of the lighting body
in die-cast aluminium includes efficient heat sinks for optimum heat dissipation, guaranteeing optimal operating temperature for drivers and LEDs.
SAFETY SHIELD AND BACK HOUSING Anti-static metallised polycarbonate
with scratch resistant protective coating.
The combination of innovative materials and surface treatments ensure that this shield maintains good light emission.
OPTICS IOS system (Interchangeable Optical System) A full range of beams and high
efficiency (up to 90)
INSTALLATION OF TRACK-MOUNTED PROJECTORS Projectors complete with adapter for mounting on Reggiani 3-circuit track. (The compatibility of the adapter with the various 3-circuit tracks available
on the market will require prior verification).
INSTALLATION OF SURFACE-MOUNTED
PROJECTORS Loop-in/loop-out facility with pre-wired power supply cable for
cascade connection.
DEGREE OF PROTECTION IP65 Track-mounted version: IP40
-70° +60°
356°
ADJUSTMENT (IF ENVISAGED)
-70° +50° in the vertical axis
356° in the horizontal axis
356°
Safety shield and back housing made from anti-static metallised polycarbonate with scratch resistant protective coating.
401
IP65 PROJECTORS ArgiakFixed / adjustable projector
Argiak
RE LED LUCE incorporates the best high efficiency LEDs (up to 4295 lm, 108 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94).Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
Fixed surface-mounted version
Adjustable surface-mounted version
Track-mounted version
Optics IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version. There are also versions with gold optics or with selective filters for lighting foodstuffs.
Control gear technologies High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
For Re Led Luce 2x14W • Non-dimmable driver (120 or 240V AC/DC).• Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.
For Re Led Luce 4x14W • Non-dimmable driver (220/240V).• Driver (220-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 5%.
402The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Argiak IP65 PROJECTORS
Fixed / adjustable projector
ArgiakSurface-mounted projector with IOS optics, LED LUCE and control gear technology
Fixed surface-mounted version
12825460113
2x14W
2x860lm
3000K
CRI 90
2x995lm
3000K
CRI 85
2x1100lm
4000K
CRI 85
2x1315lm
5000K
CRI 65
Dimmable (1-10V DC)
2x 6° 0.39601.HQ 0.39601.WW 0.39601.NN 0.39601.CC
2x 8° 0.39602.HQ 0.39602.WW 0.39602.NN 0.39602.CC
2x11° 0.39603.HQ 0.39603.WW 0.39603.NN 0.39603.CC
2x15° 0.39604.HQ 0.39604.WW 0.39604.NN 0.39604.CC
2x26° 0.39605.HQ 0.39605.WW 0.39605.NN 0.39605.CC
Adjustable surface-mounted version
254 12860 109
60
Dimmable (1-10V DC)
2x 6° 0.39611.HQ 0.39611.WW 0.39611.NN 0.39611.CC
2x 8° 0.39612.HQ 0.39612.WW 0.39612.NN 0.39612.CC
2x11° 0.39613.HQ 0.39613.WW 0.39613.NN 0.39613.CC
2x15° 0.39614.HQ 0.39614.WW 0.39614.NN 0.39614.CC
2x26° 0.39615.HQ 0.39615.WW 0.39615.NN 0.39615.CC
ArgiakAdjustable track-mounted projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
254 12860110 2x14W
2x860lm
3000K
CRI 90
2x995lm
3000K
CRI 85
2x1100lm
4000K
CRI 85
2x1315lm
5000K
CRI 65The degree of protection (IP65) refers to the projector only.
Non-dimmable
2x 6° 0.39621.HQ 0.39621.WW 0.39621.NN 0.39621.CC
2x 8° 0.39622.HQ 0.39622.WW 0.39622.NN 0.39622.CC
2x11° 0.39623.HQ 0.39623.WW 0.39623.NN 0.39623.CC
2x15° 0.39624.HQ 0.39624.WW 0.39624.NN 0.39624.CC
2x26° 0.39625.HQ 0.39625.WW 0.39625.NN 0.39625.CC
403Visit www.reggiani.net/code to access the product datasheet.
IP65 PROJECTORS ArgiakFixed / adjustable projector
ArgiakSurface-mounted projector with IOS optics, LED LUCE and control gear technology
Fixed surface-mounted version
12850860113
4x14W
4x860lm
3000K
CRI 90
4x995lm
3000K
CRI 85
4x1100lm
4000K
CRI 85
4x1315lm
5000K
CRI 65
Dimmable (1-10V DC)
2x 6° 0.39651.HQ 0.39651.WW 0.39651.NN 0.39651.CC
2x 8° 0.39652.HQ 0.39652.WW 0.39652.NN 0.39652.CC
2x11° 0.39653.HQ 0.39653.WW 0.39653.NN 0.39653.CC
2x15° 0.39654.HQ 0.39654.WW 0.39654.NN 0.39654.CC
2x26° 0.39655.HQ 0.39655.WW 0.39655.NN 0.39655.CC
Adjustable surface-mounted version
12850860109
60
Dimmable (1-10V DC)
2x 6° 0.39661.HQ 0.39661.WW 0.39661.NN 0.39661.CC
2x 8° 0.39662.HQ 0.39662.WW 0.39662.NN 0.39662.CC
2x11° 0.39663.HQ 0.39663.WW 0.39663.NN 0.39663.CC
2x15° 0.39664.HQ 0.39664.WW 0.39664.NN 0.39664.CC
2x26° 0.39665.HQ 0.39665.WW 0.39665.NN 0.39665.CC
ArgiakAdjustable track-mounted projector with IOS optics, LED LUCE and control gear technology
For 3-circuit track
12850860110 4x14W
4x860lm
3000K
CRI 90
4x995lm
3000K
CRI 85
4x1100lm
4000K
CRI 85
4x1315lm
5000K
CRI 65
The degree of protection (IP65) refers to the projector only.
Non-dimmable
2x 6° 0.39671.HQ 0.39671.WW 0.39671.NN 0.39671.CC
2x 8° 0.39672.HQ 0.39672.WW 0.39672.NN 0.39672.CC
2x11° 0.39673.HQ 0.39673.WW 0.39673.NN 0.39673.CC
2x15° 0.39674.HQ 0.39674.WW 0.39674.NN 0.39674.CC
2x26° 0.39675.HQ 0.39675.WW 0.39675.NN 0.39675.CC
404
Rios Plus / Rios / Iperios EXTERIOR LUMINAIRES
Adjustable projector
Design: Fabio Reggiani
Rios PlusEXTREME LIGHT -30°C / +60°C
When the environmental
conditions turn extreme and
traditional luminaires show
their functional limits, a new
category of products that
can stand up to the toughest
conditions are required.
RIOS Plus, together with
14W LED Luce, is the
versatile luminaire that
can meet the many lighting
design needs in the most
extreme conditions.
52_rios plus-rios-iperios_2012.indd 404 07/04/12 17:47
405
EXTERIOR LUMINAIRES IperiosAdjustable projector
Rios is a fully adjustable
exterior projector in three
sizes, with a seductive goblet
shape.
In some versions, Rios has a
long extended arm to create
accent lighting, whereas the
compact models can blend
right into their surroundings.
Small Rios is designed to
light outdoor areas at short
distances (simple garden
beds or porticoes).
Medium Rios is suitable for
lighting gardens, courtyards,
pathways, porticoes as well
as architecture, sculptures,
monuments and facades.
Large Rios guarantees
excellent results in
lighting tall trees, outdoor
exhibitions, pathways and
sizeable courtyards.
Rios IperiosIperios is a large outdoor
projector with the
overflowing power of a
flooding river of light.
Its light beams are capable
of enhancing installations
and architectonic structures
of significant heights.
Iperios is the larger version
of Rios: they both use high
performance light sources
and can be fitted for the
IOS System.
Installation is facilitated by a
quick-fit connecting module
providing both mechanical
and electrical connection.
The high degree of
protection ( IP66) makes
Iperios perfect for lighting
outdoor exhibitions,
architecture, obelisks,
pathways and sizeable
courtyards.
406
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Two harmonious elements in die-cast
aluminium, held together by a joint that enables utmost adjustment of the luminaire, house the control gear and the optical compartment, which is fitted with a passive heat sink that exploits the thermal conductivity of the aluminium and the convection current generated by virtue of the temperature difference in the air around the heat sink, ensuring perfectly efficient and long-lasting light sources.
OTTICHE IOS system (Interchangeable Optical System) A full range of beams and high
efficiency (up to 90)
SHIELD Die-cast aluminium front lens cover
with heat treated convex safety glass, gaskets and three stainless steel locking screws..
Iperios INSTALLATION Quick-fit connecting module with
mounting bracket, separated from the base by a simple slide, easy to attach to the surface. The luminaire body can be positioned after electrical connection using the special connector supplied.
INSTALLATION OF SURFACE-MOUNTED LUMINAIRES
Cable access from the side.
ADJUSTMENT
100° in the vertical axis (adjustment with screw lock).
356° in the horizontal axis
Quick-fit connecting module with mounting bracket, separated from the base by a simple slide, easy to attach to the surface. The luminaire body can be positioned after electrical connection using the special connector supplied.
Rios Plus
Iperios
Rios Plus / Rios / Iperios EXTERIOR LUMINAIRES
Adjustable projector
407
Rios PlusRios Iperios
RE LED LUCE incorporates the best high efficiency LEDs (up to 2535 lm, 80 lm/W) with varying tones of excellent white (3000K - 4000K, CRI from 84 to 94 ). Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For IOS versions with metal halide lamps. For versions with low voltage halogen lamp with built-in reflector.
For IOS versions with metal halide lamps.
Optics IOS reflectors with Ø 80 mm (LL2) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%). The shield is clear for very narrow beams, satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version.
99.99% pure aluminium IOS reflectors with Ø 80 mm and twist-lock fixing system for narrow, medium and wide beams.
Reflector incorporated in the lamp.
99.99% pure aluminium IOS reflectors with twist-lock fixing system for narrow, medium and wide beams.
Control gear technologies
High efficiency driver 85% and a power factor of nearly 1 assure real energy savings. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
HF control gear for metal halide lamps with ceramic technology.
Electronic transformer. HF control gear for metal halide lamps with ceramic technology.
For Re Led Luce 14W
• Non-dimmable driver (120 or 240V AC/DC).
For Re Led Luce 26W
• Non-dimmable driver (108-264V AC/DC).• Driver (120-240V AC/DC) with 1-10V analogue dimmer or dimmable simply with a potentiometer. Luminous intensity adjustment from 100% to 10%.
Provision for luminous intensity adjustment with external phase cut dimmer.
EXTERIOR LUMINAIRES Rios Plus / Rios / IperiosAdjustable projector
408The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Rios Plus IP66 IK03Adjustable projector with IOS optics,LED LUCE and control gear technology
Surface-mounted, compact version
222
ø156
ø1301x14W
860lm
3000K
CRI 90
995lm
3000K
CRI 85
1100lm
4000K
CRI 85
Provision for luminous intensity adjustment with external phase cut dimmer.
2x 6° 0.34101.HQ 0.34101.WW 0.34101.NN
2x 8° 0.34102.HQ 0.34102.WW 0.34102.NN
2x11° 0.34103.HQ 0.34103.WW 0.34103.NN
2x15° 0.34104.HQ 0.34104.WW 0.34104.NN
2x26° 0.34105.HQ 0.34105.WW 0.34105.NN
W. W. Mira 0.34106.HQ 0.34106.WW 0.34106.NN
Version:Non-dimmable
Version:Dimmable (1-10V DC)
Surface-mounted version with extended arm
ø130
ø156
630
Provision for luminous intensity adjustment with external phase cut dimmer.
2x 6° 0.34111.HQ 0.34111.WW 0.34111.NN
2x 8° 0.34112.HQ 0.34112.WW 0.34112.NN
2x11° 0.34113.HQ 0.34113.WW 0.34113.NN
2x15° 0.34114.HQ 0.34114.WW 0.34114.NN
2x26° 0.34115.HQ 0.34115.WW 0.34115.NN
W. W. Mira 0.34116.HQ 0.34116.WW 0.34116.NN
Version:Non-dimmable
Version:Dimmable (1-10V DC)
Rios Plus EXTERIOR LUMINAIRES
Adjustable projector
409Visit www.reggiani.net/code to access the product datasheet.
1x26W
2070lm
3000K
CRI 94
2408lm
3000K
CRI 85
2535lm
4000K
CRI 84
2x 6° 0.34141.HQ 0.34141.WW 0.34141.NN
2x 8° 0.34142.HQ 0.34142.WW 0.34142.NN
2x11° 0.34143.HQ 0.34143.WW 0.34143.NN
2x15° 0.34144.HQ 0.34144.WW 0.34144.NN
2x26° 0.34145.HQ 0.34145.WW 0.34145.NN
W. W. Mira 0.34146.HQ 0.34146.WW 0.34146.NN
2x 6° V. 34141.HQ V. 34141.WW V. 34141.NN
2x 8° V. 34142.HQ V. 34142.WW V. 34142.NN
2x11° V. 34143.HQ V. 34143.WW V. 34143.NN
2x15° V. 34144.HQ V. 34144.WW V. 34144.NN
2x26° V. 34145.HQ V. 34145.WW V. 34145.NN
W. W. Mira V. 34146.HQ V. 34146.WW V. 34146.NN
2x 6° 0.34151.HQ 0.34151.WW 0.34151.NN
2x 8° 0.34152.HQ 0.34152.WW 0.34152.NN
2x11° 0.34153.HQ 0.34153.WW 0.34153.NN
2x15° 0.34154.HQ 0.34154.WW 0.34154.NN
2x26° 0.34155.HQ 0.34155.WW 0.34155.NN
W. W. Mira 0.34156.HQ 0.34156.WW 0.34156.NN
2x 6° V. 34151.HQ V. 34151.WW V. 34151.NN
2x 8° V. 34152.HQ V. 34152.WW V. 34152.NN
2x11° V. 34153.HQ V. 34153.WW V. 34153.NN
2x15° V. 34154.HQ V. 34154.WW V. 34154.NN
2x26° V. 34155.HQ V. 34155.WW V. 34155.NN
W. W. Mira V. 34156.HQ V. 34156.WW V. 34156.NN
EXTERIOR LUMINAIRES Rios PlusAdjustable projector
410
Rios Adjustable projector for low voltage halogen lamps
Surface-mounted, compact version (IP66) Surface-mounted version with extended arm (IP55)
ø 86
ø 156
163
55219
QR-CB / GU5.3ø
156
621
55
ø86
QR-CB / GU5.3
1x50 Watt 1x50 Watt
of the lamp 0.13200.00 of the lamp 0.13220.00
Rios Adjustable projector with IOS optics and control gear technology for metal halide lamps
Surface-mounted, compact version (IP66)
163
57255
ø 182
ø 137
CDM-TC / G8.5
1x35 Watt 1x50 Watt 1x70 Watt
2x 7° /8° 0.13241.00 0.50220.00 0.13244.00
2x17° 0.13242.00 0.50221.00 0.13245.00
2x28°/29° 0.13243.00 0.50222.00 0.13246.00
Surface-mounted version with extended arm (IP55)
ø182
ø 137
623
57
2x 7° /8° 0.13271.00 0.50223.00 0.13274.00
2x17° 0.13272.00 0.50224.00 0.13275.00
2x28°/29° 0.13273.00 0.50225.00 0.13276.00
Rios Adjustable projector with IOS optics and control gear technology for metal halide lamps
Surface-mounted, compact version (IP66)
ø 162
269
57
326
ø 182
CDM-T / G12
1x35 Watt 1x50 Watt 1x70 Watt
2x 7° 0.13283.00 0.50226.00 0.13286.00
2x11° 0.13284.00 0.50227.00 0.13287.00
2x25° 0.13285.00 0.50228.00 0.13288.00
Surface-mounted version with extended arm (IP55)
ø182
ø 162
57
6872x 7° 0.13293.00 0.50229.00 0.13296.00
2x11° 0.13294.00 0.50230.00 0.13297.00
2x25° 0.13295.00 0.50231.00 0.13298.00
Rios EXTERIOR LUMINAIRES
Adjustable projector
The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
411Visit www.reggiani.net/code to access the product datasheet.
Iperios IP66Adjustable projector with IOS optics and control gear technology for metal halide lamps
500
170ø 284
ø 280
CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt 1x250 Watt
HF HF HF HF HF HF HPF HPF
2x 2° / 3° 0.13516.00 0.13513.00 0.50244.00 0.13523.00 0.50247.00 0.13533.00 0.13530.EV 0.13540.EV
2x14°/11° 0.13517.00 0.13514.00 0.50245.00 0.13524.00 0.50248.00 0.13534.00 0.13531.EV 0.13541.EV
2x21°/24° 0.13518.00 0.13515.00 0.50246.00 0.13525.00 0.50249.00 0.13535.00 0.13532.EV 0.13542.EV
NEXT HOME and garden Shoreham, UK
EXTERIOR LUMINAIRES IperiosAdjustable projector
412
Narancia 300 outdoor EXTERIOR LUMINAIRES
Adjustable projector
Narancia 300 outdoorwith a dual light beam
directed both downwards
and upwards.
Narancia with in direct
light beam can be inverted
when mounted to obtain
direct light distribution.
The adjustable optical
compartment can also
be locked into the most
favourable position.
Narancia 300 outdoor
is the right solution if you
are looking for an effi cient
wall mounted adjustable
projector with a classic,
balanced design, for easy
use and maintenance.
It has the same qualities as
the interior version with the
addition of a high degree of
protection (IP66), combined
with all the strength of the
IOS (Interchangeable Optical
System) system.
Narancia can elegantly fi t
into classic architecture and
modern architecture.
Narancia’s strength lies
in its elegant but strong
form, the use of the most
modern HF control gear
technologies, the excellent
control of the light emitted
and its softness.
It comes in two versions:
with indirect light
distribution,
which only directs light
upwards, and with direct/
indirect light distribution,
Design: Fabio Reggiani
53_narancia outdoor_2012.indd 412 07/04/12 17:51
413
EXTERIOR LUMINAIRES Narancia 300 outdoorAdjustable projector
Atrium, monumental Church of S. Gregorio Armeno - Naples, Italy
414
Narancia 300 outdoor EXTERIOR LUMINAIRES
Adjustable projector
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Die-cast aluminium; structure with
separate compartments for optimum heat dissipation.
SHIELD Heat treated clear safety glass, flat
for versions with asymmetric light distribution, convex for versions with
IOS system.
INSTALLATION Side-sliding mounting bracket for
quick installation.
INSTALLATION POSITION 0°, traditional mounting - suitable
for every situation that calls for soft indirect lighting obtained when it reflects off the walls.
180°, inverted mounting for direct light (where specified).
ADJUSTMENT OF THE OPTICAL COMPARTMENT
Adjustable in three positions -10°/0°/20° in the vertical axis with provision for locking the luminaire in
the desired position.
ADJUSTMENT OF THE IOS SYSTEM -25°/ 0°/25° on the side.
VERSION WITH ASYMMETRIC LIGHT DISTRIBUTION
99.9% pure aluminium reflector.
Installation Adjustment of the optical compartment
Adjustmentof the IOS system
Shield
It can also be installed as direct light luminaire
415Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
EXTERIOR LUMINAIRES Narancia 300 outdoorAdjustable projector
Narancia 300 outdoorAdjustable wall-mounted projector with indirect light distribution, IOS optics and control gear technology for metal halide lamps
300
270
200
25° 25°
10° 20°CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt
2x 7° / 8° 0.14750.00 0.14753.00 0.50250.00 0.14757.00
2x17° 0.14751.00 0.14755.00 0.50251.00 0.14758.00
2x28°/29° 0.14752.00 0.14756.00 0.50252.00 0.14759.00
W. W. Mira 0.14775.00 0.14776.00 0.50253.00 0.14777.00
NaranciaAdjustable wall-mounted projector with indirect light distribution for metal halide lamps and compact fluorescent lamps
300
270
171
10° 20° CDM-T / G12 TC-TE / GX24q-1 TC-TE / GX24q-2
1x35 Watt 1x70 Watt 1x13 Watt 1x18 Watt
asymmetricbeams
0.14703.00 0.14715.00
2 x53° 0.14729.00
Version:with stand-by halogen lamp
1x100 Watt
2 x38° 0.14732.00
asymmetricbeams
0.14716.00
74,9
QT-DE/ R7s
NaranciaAdjustable wall-mounted projector with direct/indirect light distribution for mains voltage halogen lamps, metal halide lamps and compact fluorescent lamps
300
270
171
10° 20° QT-DE / R7s CDM-T / G12 TC-TE / GX24q-1 TC-TE / GX24q-2
114,2
1x200 Watt 1x35 Watt 1x70 Watt 1x13 Watt 1x18 Watt
0.14701.00 0.14705.00 0.14717.00 0.14730.00 0.14733.00
Version:with stand-by halogen lamp
1x100 Watt
0.14718.00
74,9
QT-DE/ R7s
416
Zagara / Hibou EXTERIOR LUMINAIRES (IP66)
Adjustable projector
Design: Fabio Reggiani
HibouHibou is a highly versatile,
powerful, adjustable exterior
luminaire with direct or
indirect, symmetric or
asymmetric light distribution.
The design with separate
compartments optimises
heat dissipation of Hibou
which can be used also under
the toughest conditions
(IP66).
The square optical
compartment can be rotated
for precise and discreet
lighting of porticoes, church
interiors and exteriors,
palazzos and museums.
Hibou can also be installed
on cornices or under eaves.
Zagara is a versatile,
compact adjustable IP66-
rated projector, making it
extraordinary for perfectly
highlighting architecture and
objects of all shapes and
sizes, discreetly enhancing
them.
Zagara is proposed in
models with asymmetric or
symmetric light distribution
and is suitable for a number
of applications, both indoors
and outdoors.
Extended brackets and
arm brackets are available
to light signs, billboards,
facades and architectural
details.
Zagara
54_zagara_hibou_united_2012.indd 416 07/04/12 17:53
417
EXTERIOR LUMINAIRES (IP66) UnitedAdjustable projector
Design Luigi Manzoni
United is a compact exterior
projector with symmetric or
asymmetric light distribution
that imitates the aesthetics
of industrial luminaires,
with a more refined form.
United is formed of a central
body that rotates around
a mounting bracket; its
optical compartment and
control gear are independent
from each other and also
have separate access to
guarantee optimum heat
dissipation. The versatility of
the light sources, the wide
range of light beams and the
high degree of protection
(IP 66) make United suitable
for flexible use, including
architectural-monument
lighting, and functional
industrial lighting.
Numerous accessories such
as coloured dichroic filters,
Fresnel lens, barn doors and
anti-glare louvre highlight
the versatility of United.
United
GUANGZUNG OPERA HOUSE
418The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
HibouAdjustable projector with asymmetric light distribution and control gear technology for metal halide lamps
IP66
112
388
96
205x163
163
388
96
CDM-TC / G8.5
1x70 Watt
2x 8° 0.14772.00
2x17° 0.14773.00
2x29° 0.14774.00
W. W. Mira 0.14782.00
ZagaraAdjustable projector with IOS optics and control gear technology for metal halide lamps
IP66
119
205
140
CDM-TC / G8.5
1x20 Watt 1x35 Watt 1x70 Watt
asymmetric beams
0.12001.00 0.12003.00 0.12005.00
Zagarà / Hibou EXTERIOR LUMINAIRES
Adjustable projector
419Visit www.reggiani.net/code to access the product datasheet.
UnitedAdjustable surface-mounted projector with asymmetric light distribution and control gear technology for double ended metal halide/sodium vapour lamps and mains voltage halogen lamps
IP66
230200
276
300
222
HIT-DE / RX7s HIT-DE / FC2 QT-DE / R7s
114,2
1x70 Watt 1x150 Watt 1x250 Watt 1x230 Watt
asymmetric beams
0. 05091.EV 0. 05090.EV 0. 05098.EV 0. 05095.00
UnitedAdjustable surface-mounted projector with symmetric light distribution and control gear technology for metal halide lamps
IP66
230200
276
300
222
CDM-T / G12
1x70 Watt 1x150 Watt
2x 7° 0. 05093.EV
2x20° 0. 05096.EV
2x10° 0. 05092.EV
2x22° 0. 05097.EV
EXTERIOR LUMINAIRES UnitedAdjustable projector
420
Design: Nome Cognome
Janios EXTERIOR LUMINAIRES
Adjustable projector
Brooks Brother, United States
JaniosJanios, a wall-mounted
projector with direct/
indirect light distribution
and adjustable optics has
a modern, classic and
essential line that can fit into
thousands of settings.
Visual comfort, versatility
and robustness (IP 65) make
it valuable in
interior and exterior lighting
design.
421
Didascalia
Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
EXTERIOR LUMINAIRES JaniosAdjustable projector
JaniosProjector with adjustable IOS optics and control gear technology for metal halide lamps.
IP65
110
150
95
287238
115
CDM-TC / G8.5
indirect direct
1x20 Watt
2x7° 2x7° 0. 05990.00
2x17° 2x17° 0. 05991.00
2x28° 2x28° 0. 05992.00
W. W. Mira W. W. Mira 0. 05993.00
JaniosProjector with adjustable optics and control gear technology for low voltage halogen lamps.
110
150
95
287238
115
QR-CB / GU5.3
indirect direct
1x20 Watt
of the lamp 0. 05975.00
JaniosProjector with adjustable optics for mains voltage halogen lamps.
Projector
110
150
95
287238
115
HI-SPOT / GZ10
indirect direct
1x35 Watt
of the lamp 0. 05976.00
Projector with frontal white LEDs
110
150
287238
95
115
HI-SPOT / GZ10
indirect direct
+ white LEDs integrated at the front
1x35 Watt
of the lamp 0. 05977.00
422
Design: Fabio Reggiani
Pasios EXTERIOR LUMINAIRES
Fixed projector
Design: Fabio Reggiani
PasiosPasios is a surface-mounted
or pendant projector with
an innovative fan design;
it combines the attractive
volume with adequate
thermal equilibrium of the
control gear technologies.
Its exceptional control of
light and high degree of
protection (up to IP 66) make
it suitable for diversified and
safe indoor and outdoor use.
423Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
EXTERIOR LUMINAIRES PasiosFixed projector
Pasios can be enriched by an optional bright diffuser formed of a metal structure and sixteen coloured or transparent polycarbonate segments to enhance and restyle the essential design of the projector.
Pasios Fixed projector with IOS optics and control gear technology for metal halide lamps
Surface-mounted version (IP66)
334
231
ø161
209
CDM-T / G12
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt
HF HF HF HF HF HPF
2x 7° 0.14831.00 0.14836.00 0.50254.00 0.14841.00 0.50258.00 0.14846.EV
2x11° 0.14832.00 0.14837.00 0.50255.00 0.14842.00 0.50259.00 0.14847.EV
2x25°/24° 0.14833.00 0.14838.00 0.50256.00 0.14843.00 0.50260.00 0.14848.EV
W. W. Mira 0.14834.00 0.14839.00 0.50257.00 0.14844.00 0.50261.00 0.14849.EV
Pendant (IP64)
ø190 ø19055 55
234
3000
334 209
2x 7° 0.14886.00 0.14891.00 0.50262.00 0.14896.00 0.50266.00 0.14901.EV
2x11° 0.14887.00 0.14892.00 0.50263.00 0.14897.00 0.50267.00 0.14902.EV
2x25°/24° 0.14888.00 0.14893.00 0.50264.00 0.14898.00 0.50268.00 0.14903.EV
W. W. Mira 0.14889.00 0.14894.00 0.50265.00 0.14899.00 0.50269.00 0.14904.EV
424
Design: Fabio Reggiani
Cyl light EXTERIOR LUMINAIRES
Fixed projector
Design: Fabio Reggiani
Cyl LightCyl light is a surface
mounted fixed projector with
symmetric or asymmetric
light distribution and a high
degree of protection (IP 67).
Its neutral and meticulously
clean lines make it
compatible with any
architectural style. The
body, with built-in control
gear, consists of an elegant
cylinder. A special mounting
bracket makes it possible
to install two Cyl Light
luminaires together, one
directed downwards and the
other upwards for prominent
lighting of buildings and
architecture.
425
EXTERIOR LUMINAIRES Cyl lightFixed projector
C.A.M. - Monza, Italy
426
Cyl light EXTERIOR LUMINAIRES
Fixed projector
STANDARD FINISHES 26 black-graphite 27 white gloss 28 metallised grey
BODY Polyester powder coated steel or
extruded aluminium.
SHIELD Die-cast aluminium lens cover
complete with sealing gasket and convex, heat treated, moulded and tempered safety glass.
OPTICS IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90).
REFLECTOR High specularity, 99.9% pure
aluminium reflector for compact fluorescent lamps.
INSTALLATION Quick-fit connecting module providing
both mechanical and electrical connection.
DEGREE OF PROTECTION IP66/67
SIZES Cyl light comes in three sizes: Ø 180 mm Ø 240 mm Ø 260 mm
WALL MOUNTING
Mounting bracket for one or two luminaires.
This accessory is suited to highlighting architectural structures, and makes the product especially flexible.
Lens cover complete with sealing gasket and convex, moulded and tempered safety glass (in the IOS version).
Anti-glare louvre for utmost visual comfort
427
EXTERIOR LUMINAIRES Cyl lightFixed projector
Cyl light
For IOS versions with metal halide lamps. For versions with double-ended metal halide/sodium vapour lamps.
For versions with compact fluorescent lamps.
Optics 99.99% pure aluminium IOS reflectors with Ø 130 mm and twist-lock fixing system.
99.9% pure anodised aluminium reflector. High specularity, 99.9% pure aluminium reflector or reflector made from metallised polycarbonate with anti-scratch protection
Control gear technologies HF control gear for 20 W lamps and HPF control gear for 35/70/150 W lamps.
Low-loss HPF control gear (with superimposed ignitor, power supply with thermal circuit breaker and power factor correction capacitor, cosf 0.9).
HF EEI=A1/A2HPF EEI =A2/A3 and power factor correction capacitor (cosf 0.9)
428The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specificaations.
Cyl light SlimFixed projector with IOS optics and control gear technology for metal halide lamps
IP66
ø 180
263
CDM-T / G12
1x20 Watt 1x35 Watt 1x70 Watt 1x150 Watt
2x 7° 0. 05241.00 0. 05246.EV 0. 05251.EV 0. 05256.EV
2x11° 0. 05242.00 0. 05247.EV 0. 05252.EV 0. 05257.EV
2x25°/24° 0. 05243.00 0. 05248.EV 0. 05253.EV 0. 05258.EV
Cyl light SlimFixed projector with control gear technology for compact fluorescent lamps
ø 180
263
TC-TE / GX24q-2 TC-TE / GX24q-3
1x18 Watt 1x26 Watt - 1x32 Watt
2x48° 0. 05260.00
2x52°/55° 0. 05261.00
Cyl light Slim EXTERIOR LUMINAIRES
Fixed projector
429Visit www.reggiani.net/code to access the product datasheet.
EXTERIOR LUMINAIRES Cyl lightFixed projector
Cyl lightFixed projector with symmetric light distribution and control gear technology for metal halide lamps and compact fluorescent lamps
IP67
ø 240
287
CDM-T / G12 TC-D / G24d-3
1x70 Watt 1x150 Watt 2x26 Watt
2x50° 0. 06060.EV
2x13° 0. 06070.EV
2x44° 0. 06061.EV
2x15° 0. 06071.EV
2x50° 0. 06085.EV
Cyl lightFixed projector with asymmetric light distribution and control gear technology for metal halide lamps and compact fluorescent lamps
ø 240
287
HIT-DE / RX7s TC-D / G24d-3
1x70 Watt 1x150 Watt 1x26 Watt
asymmetric beams
0. 06080.EV 0. 06081.EV 0. 06083.EV
Cyl lightFixed projector with symmetric light distribution and control gear technology for metal halide lamps
IP55
ø 260
285
HIT-DE / RX7s
1x70 Watt 1x150 Watt
2x41° 0. 07605.EV
2x44° 0. 07606.EV
430
Flure RECESSED LUMINAIRES
Modular lighting system
FlureFlure is a modular lighting
system with a minimal and
pure design and comes in
the following confi gurations:
exterior surface mounted,
pendant and recessed, also
walk-over and drive-over,
in four different lengths. Its
aluminium body with bezel
and AISI 316 Marine-grade
stainless steel details, its
high degree of protection
(IP67 – recessed Flure, IP66
the other models) and its
robustness make it possible
to use Flure in the toughest
environmental conditions.
The ground recessed version
comes with both symmetric
and asymmetric light beam,
whereas the wall and ceiling
mounted versions have
symmetric beam.
58_flure_2012.indd 430 07/04/12 17:55
431
RECESSED LUMINAIRES FlureModular lighting system
Road of Freedom
432
Flure RECESSED LUMINAIRES
Modular lighting system
SURFACE MOUNTED LUMINAIRES IP 66
STANDARD FINISH 28 metallised grey
BODY AND BACK HOUSING Die-cast aluminium and screws in
steel.
REFLECTOR 99.9% pure aluminium.
SHIELD Heat treated clear safety glass.
BUILT-IN CONTROL GEAR TECHNOLOGIES
Low loss HF dual power control gear, cosf = 0.9 (for connection to mains power).
ACCESSORIES Coloured filters, anti-glare louvre,
barn doors.
ADJUSTMENT
Wall mounted versions: fixed and adjustable.• Fixed: indirect or direct light
distribution• Adjustable: indirect or direct light
distribution with the possibility of 90° rotation using the retaining bracket. Fixed, wall mounted versions that can be mounted with direct or indirect light distribution, and
adjustable versions with the possibility of rotating the body to 90°.
FIXED ADJUSTABLE
DRIVE-OVER RECESSED LUMINAIRES (IP67)
STANDARD FINISH 00 stainless steel
BODY AND BACK HOUSING Die-cast aluminium.
BEZEL AND SCREWS AISI 316 Marine-grade stainless steel.
REFLECTOR 99.9% pure aluminium.
SHIELD Heat treated clear safety glass.
CONTROL GEAR Built-in low loss HF control gear,
cosf = 0.9 (for connection to mains power).
ACCESSORIES Coloured filters, anti-glare louvre,
barn doors.
SYMMETRIC LIGHT
WALL MOUNTED
DRIVE-OVER RECESSED LUMINAIRE
ASYMMETRIC LIGHT
Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
RECESSED LUMINAIRES FlureModular lighting system
FlureFixed ground recessed DRIVE-OVER luminaire with symmetric/asymmetric light distribution and control gear technology for fluorescent lamps
IP67 KG
2000 IK08/IK10
Symmetric
90
100
Asymmetric
90
100
662640
71,5100
90
T5 / FH
1x14 Watt
Symmetric Asymmetric
0.12500.00 0.12495.00
962940
71,5100
90
1x21 Watt
0.12501.00 0.12496.00
12621240
71,5
90100
1x28 Watt
0.12502.00 0.12497.00
15621540
90
71,5
100
1x35 Watt
0.12503.00 0.12498.00
FlureFixed wall mounted luminaire with symmetric light distribution and control gear technology for fluorescent lamps
Adjustable wall mounted luminaire with symmetric light distribution and control gear technology for fluorescent lamps
IP66 IK07
Fixed
116
85
Adjustable167,7
85
85625
T5 / FH T5 / FQ T5 / FH T5 / FQ
85625
1x14 Watt 1x24 Watt 1x14 Watt 1x24 Watt
0.12520.00 0.12530.00
85
925
1x21 Watt 1x39 Watt85
925
1x21 Watt 1x39 Watt
0.12522.00 0.12532.00
851225
1x28 Watt 1x54 Watt
851225
1x28 Watt 1x54 Watt
0.12524.00 0.12534.00
Version: for permanent illumination when used as emergency lighting 0.12525.00 0.12535.00
851525
1x35 Watt 1x49 Watt 1x80 Watt
851525
1x35 Watt 1x49 Watt 1x80 Watt
0.12526.00 0.12536.00
Version: for permanent illumination when used as emergency lighting 0.12527.00 0.12537.00
434
Hillock / Murale EXTERIOR LUMINAIRES
Fixed ceiling-mounted luminaire / Recessed luminaire
Design: Fabio Reggiani
Hillock - MuraleHillock can be used to light
outdoor pathways in gardens
or indoor stairways and halls
in shopping centres, stores,
hotels and restaurants
without distinction.
The version for mains
voltage halogen lamps
is also suitable for home
use, as well as in areas
where dimming is required
(cinemas and theatres,
conference rooms,
relaxations zones in
wellness centres).
The version for metal halide
lamps is extensively used
in cantilever roofs, fuel
stations, building or hotel
lobbies, shopping arcades,
stadiums, gyms, railway
stations and airports.
Exterior luminaire for
compact fl uorescent lamps,
Murale comes in the
recessed versions, with or
without anti-glare louvre.
MURALE
HILLOCK
59_Hillock_Murale_IP55_2012.indd 434 07/04/12 17:57
435
IP55 is a versatile adjustable projector, with or without
extended arm that provides valuable outdoor accent lighting
for swimming pools, spas,
wellness centres, facades, gardens and pathways.
Proposed with halogen lamps with dichroic reflector, IP55
owes its name to its degree of protection.
EXTERIOR LUMINAIRES IP55Adjustable projector
Bobadilla Center
Vittorio Veneto, Italy
Design: Carlo Vietri
IP55
436The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Hillock - Murale EXTERIOR LUMINAIRES
Ceiling-mounted luminaire / Recessed luminaire
HillockCeiling-mounted luminaire with control gear technology for compact fluorescent lamps, double-ended metal halide lamps and mains voltage halogen lamps
IP55
ø 350
102
TC-L / 2G11 TC-TE / GX24q-4 HIT-DE / RX7s QT-DE / R7s
114,2
2x18 Watt 1x42 Watt 1x70 Watt 1x150 Watt 1x200 Watt
2x44° 0. 07881.00
2x40° 0. 07882.00
2x 7° 0. 07886.EV
2x30° 0. 07890.EV
2x 9° 0. 07887.EV
2x31° 0. 07891.EV
2x15° 0. 07888.00
2x36° 0. 07892.00
Version for permanent illumination when used as emergency lighting
2x40° 0. 07883.00
MuraleFixed recessed luminaire with asymmetric light distribution and control gear technology for compact fluorescent lamps
Recessed version (IP54)
283
103
TC / G23
1x11 Watt
asymmetric beam
0. 06112.EV
Recessed version with louvre
283
103asymmetric
beam
0. 06135.EV
437Visit www.reggiani.net/code to access the product datasheet.
IP55Compact projector with transformer for low voltage halogen lamps with built-in dichroic reflector
145x
90
196
70
128
QR-CB / GU5.3
1x20/35/50 Watt - 12V
0. 06101.EV
IP55Adjustable projector for low voltage halogen lamps with built-in dichroic reflector
ø66
196
70
128
QR-CB / GU5.3
1x20/35/50 Watt - 12V
0. 06102.00
IP55Projector with extended arm and transformer for low voltage halogen lamps with built-in dichroic reflector
145x
90
196
70
128
QR-CB / GU5.3
1x20/35/50 Watt - 12V
0. 06103.EV
EXTERIOR LUMINAIRES IP55Proiettore orientabile
438
Metamorphosi RECESSED LUMINAIRES (IP67)
Ground recessed luminaire
Design: Fabio Reggiani
Metamorphosirecessed luminaires, fi xed
or fully adjustable, with
symmetric or asymmetric
light distribution also
integrate the IOS system and
RE LED Luce (3W).
The Metamorphosi ground
recessed luminaires, fi xed
or with tilting optics, trace
evocative pathways and
meandering curves of
light in outdoor areas like
gardens and monuments,
their natural lines making
them great for general or
accent lighting in contexts
that require high degree of
protection (IP67).
Also made from noble
metals (AISI 316 Marine-
grade stainless steel or
solid bronze), they give the
outdoor or indoor setting
a classic and refi ned
ambience. Some versions of
the Metamorphosi ground
60_metamorphosi_2012.indd 438 07/04/12 17:58
439
RECESSED LUMINAIRES (IP67) MetamorphosiGround recessed luminaire
Dives in Misericordia church. Architect Richard Meier - Rome, Italy
440
Metamorphosi RECESSED LUMINAIRES (IP67)
Ground recessed luminaire
30° 30°360°
Max static load 2000 kg
Tempered clear safety glass
Loop-in/loop-out facility for cascade connection
Detached control gear for optimum heat dissipation
PVC recessing box for in-ground installation
IOS
Body, bezel and screws in AISI 316 Marine-grade stainless steel (for finish 16)
Temperature on the glass: 75°(see specifications for each item)
STANDARD FINISHES 00 stainless steel 03 solid bronze 16 AISI 316 Marine-grade stainless
steel 28 metallised grey
METAMORPHOSI IOS Ø 294 BODY
• For finish 16: body, bezel and screws in AISI 316 Marine-grade stainless steel;
• for finish 28: body and bezel in die-cast aluminium;
• for finish 00: body in die-cast aluminium and bezel in stainless steel;
• for finish 03: body and bezel in solid bronze.
OTTICHE IOS system (Interchangeable Optical System) Instant interchangeability, a full range
of beams and high efficiency (up to 90).
ADJUSTMENT 30° in the vertical axis 360° in the horizontal axis
INSTALLATION In-ground installation through the
recessing box supplied. Loop-in/loop-out facility with pre-wired power supply cable for cascade connection.
DEGREE OF PROTECTION IP67
441
RECESSED LUMINAIRES (IP67) MetamorphosiGround recessed luminaire
Metarmorphosi
RE LED LUCE incorporates the best high efficiency LEDs (85 lm/W) with varying tones of excellent white (3000K - 4000K, CRI 85).Lifetime: more than 50,000 hours (maintaining 70% of the initial luminous flux).
For versions with low voltage halogen lamps, mains voltage halogen lamps and compact fluorescent lamps.
For IOS versions with metal halide lamps and halogen lamps.
For versions with metal halide lamps, low voltage halogen lamps, mains voltage halogen lamps and compact fluorescent lamps.
For versions with metal halide lamps and compact fluorescent lamps.
Ø 74 Ø 142 Ø 294 Ø 294 Ø 410
Optics IOS reflectors with Ø 50 mm (LL1) made from stabilised polycarbonate (up to 140°C) with highly reflective metallization - exclusive scratch resistant, vitrified surface and antistatic safety shield with high light transmission (97%).
For halogen lamps with built-in reflector.
99.99% pure aluminium IOS reflector with Ø 80 mm, twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). There are also versions with gold optics and colored dichroic filters.
Control gear technologies
High efficiency driver 85%. The robustness of the control gear is assured up to Ta 70°C and Tc 90°C and guarantees a lifetime of over 50,000 h.
HF control gear for metal halide lamps with ceramic technology.
HF control gear for metal halide lamps with ceramic technology.
HF control gear for metal halide lamps with ceramic technology.
For Re Led Luce 3W • Driver (120 or 240V AC/DC).
442The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Metamorphosi RECESSED LUMINAIRES (IP67)
Ground recessed luminaire
MetamorphosiGround recessed luminaire with IOS optics, LED LUCE and control gear technology
IP67 KG
500
ø 74
80
ø 65
1x3W
180lm
3000K
CRI 85
197lm
4000K
CRI 85
2x 7° 0. 05880.WW 0. 05880.NN
2x14° 0. 05881.WW 0. 05881.NN
2x24° 0. 05882.WW 0. 05882.NN
MetamorphosiGround recessed luminaire with tilting optics for low voltage halogen lamps and mains voltage halogen lamps
IP67 KG
1500
QR-CB / GU5.3 HI-SPOT / GZ10 QR-CB / GU5.3
1x20 Watt 1x50 Watt 1x20 Watt
Built-in transformer
0. 06091.00 0. 06093.00 0. 06092.EV
MetamorphosiGround recessed luminaire with control gear technology for compact fluorescent lamps
IP67 KG
1500
TE-DE / G24q-1
1x10 Watt
0. 06086.00
443Visit www.reggiani.net/code to access the product datasheet.
RECESSED LUMINAIRES (IP67) MetamorphosiGround recessed luminaire
Metamorphosi Adjustable ground recessed luminaire with IOS optics and control gear technology for metal halide lamps and mains voltage halogen lamps
IP67 KG
2000
CDM-T / G12 QT-14 / G9
1x20 Watt 1x35 Watt 1x50 Watt 1x70 Watt 1x100 Watt 1x150 Watt 1x60 Watt
2x 7° 0. 05817.00 0. 05821.00 0.50290.00 0. 05826.00 0.50294.00 0. 05831.00 0. 05836.00
2x11° 0. 05818.00 0. 05822.00 0.50291.00 0. 05827.00 0.50295.00 0. 05832.00 0. 05837.00
2x14° 0. 05824.00 0. 05829.00 0.50292.00 0. 05834.00 0.50296.00 0. 05839.00 0. 05842.00
2x25°/24° 0. 05819.00 0. 05823.00 0.50293.00 0. 05828.00 0.50297.00 0. 05833.00 0. 05838.00
Metamorphosi Ground recessed luminaire with fully adjustable optics and control gear technology for mains voltage halogen lamps
IP67 KG
2000
QR-111 / G23
1x65 Watt - 12V
0. 05843.EV
Metamorphosi Fixed ground recessed luminaire with symmetric light distribution and control gear technology for metal halide lamps
IP67 KG
2000
CDM-T / G12
1x20 Watt 1x35 Watt 1x70 Watt 1x150 Watt
2x 5° 0. 05918.00 0. 05920.EV 0. 05922.EV
2x16° 0. 05919.00 0. 05921.EV 0. 05923.EV
2x 6° 0. 05924.EV
2x17° 0. 05925.EV
444The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.
The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Metamorphosi RECESSED LUMINAIRES (IP67)
Ground recessed luminaire
Metamorphosi Fixed ground recessed luminaire with asymmetric light distribution and control gear technology for metal halide and sodium vapour lamps
IP67 KG
2000
HIT-DE / RX7s
1x70 Watt 1x150 Watt
fasci asimmetrici
0. 05928.EV 0. 05929.EV
Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with asymmetric light distribution and control gear technology for compact fluorescent lamps
IP67 KG
2000
TC-D / G24d-3
1x26 Watt
asymmetric beams
0. 05840.EV
Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with symmetric light distribution and control gear technology for compact fluorescent lamps
IP67 KG
2000
TC-T / GX24d-3
1x26 Watt
2x30° 0. 05841.EV
445Visit www.reggiani.net/code to access the product datasheet.
RECESSED LUMINAIRES (IP67) MetamorphosiGround recessed luminaire
Metamorphosi Fixed ground recessed DRIVE-OVER luminaire with control gear technology for compact fluorescent lamps
IP67 KG
2000
ø 410100
TC-L / 2G11 TC-TE / GX24q-4
2x18 Watt 1x42 Watt
Finitura 28 Finitura 00
2x18° 0. 05870.00
2x54° 0. 05871.00
Metamorphosi Fixed ground recessed luminaire with asymmetric light distribution and control gear technology for metal halide lamps
IP67 KG
2000
ø 410100
HIT-DE / RX7s
1x70 Watt 1x150 Watt
Finish 28 Finish 00
asymmetric beams
0. 05875.EV 0. 05877.EV
446
Design: Fabio Reggiani
Ofu RECESSED LUMINAIRES
Fixed recessed luminaire
Design: Álvaro Siza
OfuOfu is a luminaire with an
unmistakeable and original
shape designed by the great
Portuguese architect Álvaro
Siza.
Ofu has a high degree of
protection (up to IP 67), so
it can be used in even the
toughest outdoor situations.
A die-cast aluminium body
protects and hides the control
gear, and is surmounted
by an opal or transparent
methacrylate diffuser that
emits a soft light.
The luminaire can be fitted
with compact fluorescent
lamps, metal halide lamps
and RGB LEDs.
447
RECESSED LUMINAIRES OfuFixed recessed luminaire
448 Visit www.reggiani.net/code to access the product datasheet.The technology used in LEDs is progressing so rapidly that their efficiency is constantly improving.The technical data provided is accurate at March 2012. See the ONLINE datasheets for the updated specifications.
Ofu RECESSED LUMINAIRES
Fixed recessed luminaire
OfuGround recessed luminaire with control gear technology for metal halide and compact fluorescent lamps
IP67 7
650
300ø333
ø294
CDM-T / G12 TC-TE / GX24q-3
1x35 Watt 1x70 Watt 1x150 Watt 1x26 Watt 1x32 Watt
0.12110.EV 0.12111.EV 0.12112.EV 0.12113.EV 0.12114.EV
OfuGround recessed luminaire with control gear technology for COLOUR CHANGING LED module
650
300ø333
ø294
LED
14,4 Watt
0.12115.EV
449
RECESSED LUMINAIRES OfuFixed recessed luminaire
450
451
CATALOGUE 2012
LIGHT SOURCES 448
NUMERICAL INDEX
QUALITY CERTIFICATIONS 464
FRAMING PROJECTORS 462
GENERAL INFORMATION 454
INSTALLATION NOTES 452
452
LIGHT SOURCES
LAMP DATA SHOWN IN THIS CATALOGUE ARE NOT BINDING, PLEASE REFER TO LAMP MANUFACTURER DATA FOR EXACT CONFIRMATION. BEFORE PROCEEDING TO ANY INSTALLATION, ALWAYS CHECK SUITABILITY OF THE LAMP FOR THE DESIRED APPLICATION. REGGIANI SPA ILLUMINAZIONE RESERVES THE RIGHTS TO TAKE INTO CONSIDERATION THE ORDER FOR LAMPS IN RELATION TO THE CUSTOMER’S REQUIRED QUANTITY AND TO THE MINIMUM PURCHASE LOT OF GOODS FIXED BY THE LAMP MANUFACTURERS.
Abbr. Description Watt Beam width Lampholder Col. temp (k) Lumen ImMT (CDM-TM) METAL HALIDE 20 GU6.5 3000 1800 35 GU6.5 3000 3300 50 GU6.5 3000 5200
MT (CDM-TC) CDM-T MASTER COLOUR 20 G8.5 3000 1700 35 G8.5 3000 3300 70 G8.5 3000 6600
METAL HALIDE SINGLE ENDED ELITE 35 G8.5 3000 4000 50 G8.5 3000 5400 70 G8.5 3000 7800
MT (HIT) CDM-T MASTER COLOUR HQI T (Osram) 70 G12 3000 5200 HQI T (Osram) 70 G12 4200 5500 HQI T (Osram) 150 G12 3000 13000 HQI T (Osram) 150 G12 4200 13000
MASTER COLOUR, CERAMIC TECHNOLOGY HCI T (Osram) 35 G12 3000 3400 HCI T (Osram) 35 G12 4200 3300 HCI T (Osram) 70 G12 3000 6600 HCI T (Osram) 70 G12 4200 6600 HCI T (Osram) 150 G12 3000 14000 HCI T (Osram) 150 G12 4200 12700
MASTER COLOUR, CERAMIC TECHNOLOGY CDM-T (Philips) 35 G12 3000 3400 CDM-T (Philips) 70 G12 3000 6600 CDM-T (Philips) 70 G12 4200 6400 CDM-T (Philips) 150 G12 3000 14000 CDM-T (Philips) 150 G12 4200 12700
MASTER COLOUR, CERAMIC TECHNOLOGY CDM-T (Philips) Elite 35 G12 3000 4000 CDM-T (Philips) Elite 50 G12 3000 5400 CDM-T (Philips) Elite 70 G12 3000 7800 CDM-T (Philips) Elite 100 G12 3000 11000 CDM-T (Philips) Elite 150 G12 3000 15000
MD (HIT-DE) METAL HALIDE DOUBLE ENDED HQI TS 70 RX7s 3000 5000 HQI TS 70 RX7s 4200 5000 HQI TS 70 RX7s 5200 5000 HQI TS 150 RX7s 3000 11000 HQI TS 150 RX7s 4200 11250 HQI TS 150 RX7s 5200 11000 HQI TS 250 FC2 3000 20000 HQI TS 250 FC2 4200 20000 HQI TS 250 FC2 5200 20000 HQI TS 400 FC2 4200 35000 HQI TS 400 FC2 5400 36000
METAL HALIDE DOUBLE ENDED CERAMIC TECHNOLOGY HCI TS (Osram) 70 RX7s 3000 6300 HCI TS (Osram) 70 RX7s 4200 5800 HCI TS (Osram) 150 RX7s 3000 13500 HCI TS (Osram) 150 RX7s 4200 12000
METAL HALIDE DOUBLE ENDED CERAMIC TECHNOLOGY CDM-TD (Philips) 70 RX7s 3000 6100 CDM-TD (Philips) 70 RX7s 4200 5800 CDM-TD (Philips) 150 RX7s 3000 12500 CDM-TD (Philips) 150 RX7s 4200 12000 CMH TD (G.E.) 70 RX7s 3000 6400 CMH TD (G.E.) 150 RX7s 3000 12500
MC ME (HIE) METAL HALIDE ELLIPTICAL METALARC TRASPARENTE 75 E27 3200 5500 MATT 75 E27 3200 5000 TRASPARENTE 100 E27 3200 8500 MATT 100 E27 3200 8000 TRASPARENTE 150 E27 3200 13000 MATT 150 E27 3200 12500 TRASPARENTE 70 E27 3200 5200 MATT 70 E27 4000 5500
MT (CDM-TT) METAL HALIDE SINGLE ENDED 150 E40 3000 13500
MT (HIT) METAL HALIDE SINGLE ENDED 250 E40 5400 20000 POWERBALL HCI T (Osram) 250 E40 3000 25000 400 E40 5400 32000* 400 E40 3800 40000*
MR (HIR PAR) METAL HALIDE CDM R PAR 20 35 2 x 5° E27 3000 2300 WITH INTEGRAL REFLECTOR CDM R PAR 20 35 2 x 15° E27 3000 2300 CDM R PAR 30L 35 2 x 5° E27 3000 2400 CDM R PAR 30L 35 2 x 15° E27 3000 2400 CDM R PAR 30L 70 2 x 5° E27 3000 4100 CDM R PAR 30L 70 2 x 20° E27 3000 4100
CDMR MINI METAL HALIDE WITH INTEGRAL REFLECTOR 35 2 x 5° GX10 3000 - 35 2 x 12,5° GX10 3000 - 35 2 x 20° GX10 3000 -
CDM R 111 METAL HALIDE (ALUMINIUM REFLECTOR) 50 2 x 12,5° GX10 3000 - 50 2 x 20° GX10 3000 - 50 2 x 30° GX10 3000 -
453
LIGHT SOURCES
LAMP DATA SHOWN IN THIS CATALOGUE ARE NOT BINDING, PLEASE REFER TO LAMP MANUFACTURER DATA FOR EXACT CONFIRMATION. BEFORE PROCEEDING TO ANY INSTALLATION, ALWAYS CHECK SUITABILITY OF THE LAMP FOR THE DESIRED APPLICATION. REGGIANI SPA ILLUMINAZIONE RESERVES THE RIGHTS TO TAKE INTO CONSIDERATION THE ORDER FOR LAMPS IN RELATION TO THE CUSTOMER’S REQUIRED QUANTITY AND TO THE MINIMUM PURCHASE LOT OF GOODS FIXED BY THE LAMP MANUFACTURERS.
Abbr. Description Watt Beam width Lampholder Col. temp (k) Lumen ImFSD (TC) COMPACT FLUORESCENT (2 PIN) 9 G23 2700 600 9 G23 2700 600 11 G23 2700 900 11 G23 3500 900 11 G23 4000 900
FSD (TC-E) COMPACT FLUORESCENT (4PIN) 7 2G7 2700 400 11 2G7 2700 900
TC-L COMPACT FLUORESCENT 18 2G11 4000 1200 18 2G11 3000 1200 18 2G11 2700 1200 55 2G11
FSQ (TC-D) COMPACT FLUORESCENT (2 PIN) 10 G24d-1 2700 600 10 G24d-1 4000 600 13 G24d-1 2700 900 13 G24d-1 3000 900 13 G24d-1 3500 900 13 G24d-1 4000 900 18 G24d-2 2700 1200 18 G24d-2 3000 1200 18 G24d-2 3500 1200 18 G24d-2 4000 1200 26 G24d-3 2700 1800 26 G24d-3 3000 1800 26 G24d-3 3500 1800 26 G24d-3 4000 1800
FSM (TC-T) COMPACT FLUORESCENT (2 PIN) 18 GX24d-2 2700 1200 18 GX24d-2 4000 1200 26 GX24d-3 2700 1800 26 GX24d-3 4000 1800
FSQ (TC-DE) COMPACT FLUORESCENT (4 PIN) 10 G24q-1 2700 600 10 G24q-1 4000 600 13 G24q-1 2700 900 13 G24q-1 3000 900 13 G24q-1 3500 900 13 G24q-1 4000 900 18 G24q-2 2700 1200 18 G24q-2 3000 1200 18 G24q-2 3500 1200 18 G24q-2 4000 1200 26 G24q-3 2700 1800 26 G24q-3 3000 1800 26 G24q-3 3500 1800 26 G24q-3 4000 1800
FSMH (TC-TE) COMPACT FLUORESCENT (4 PIN) 13 GX24q-1 4000 900 13 GX24q-1 2700 900 18 GX24q-2 2700 1200 18 GX24q-2 4000 1800 26 GX24q-3 2700 1200 26 GX24q-3 4000 1800 32 GX24q-3 4000 2400 32 GX24q-3 3500 2400 32 GX24q-3 3000 2400 32 GX24q-3 2700 2400 42 GX24q-4 4000 3200 42 GX24q-4 3500 3200 42 GX24q-4 3000 3200 42 GX24q-4 2700 3200 57 GX24q-5 4000 4300 57 GX24q-5 3000 4300
LINEAR FLUORESCENT T5 FH 549mm 14 G5 4000 1200 549mm 14 G5 2700 1200 849mm 21 G5 4000 1900 849mm 21 G5 2700 1900 1149mm 28 G5 4000 2600 1149mm 28 G5 2700 2600 1149mm 35 G5 4000 3300 1149mm 35 G5 2700 3300 LINEAR FLUORESCENT T5 FQ 549mm 24 G5 4000 1750 549mm 24 G5 2700 1750 849mm 39 G5 4000 3100 849mm 39 G5 2700 3100 1449mm 49 G5 4000 4300 1449mm 49 G5 3000 4300 1449mm 49 G5 2700 4300 1449mm 54 G5 4000 4450 1449mm 54 G5 3000 4450 1449mm 54 G5 2700 4450 1449mm 80 G5 4000 6150 1449mm 80 G5 3000 6150 1449mm 80 G5 2700 6150
454
LIGHT SOURCES
Abbr. Description Watt Beam width Lampholder Col. temp (k) Lumen ImHRG (QR-CB 35) QUARTZ LAMP COOL-BEAM 20 2 x 5° GU4 3100 Ø 35 mm 20 2 x 19° GU4 3100 35 2 x 5° GU4 3100 35 2 x 19° GU4 3100
HRG (QR-CB 51) QUARTZ LAMP COOL-BEAM 20 2 x 6° GU5,3 3100 Ø 50 mm 20 2 x 18° GU5,3 3100 20 2 x 30° GU5,3 3100 35 2 x 4° GU5,3 3100 35 2 x 9° GU5,3 3100 35 2 x 19° GU5,3 3100 35 2 x 30° GU5,3 3100 50 2 x 6° GU5,3 3100 50 2 x 12° GU5,3 3100 50 2 x 19° GU5,3 3100 50 2 x 30° GU5,3 3100 HIG (QR-70) HALOSPOT 12V 50 2 x 4° BA15d 3000 50 2 x 12° BA15d 3000
HIG (QR-111) HALOSPOT 12V 50 2 x 2° G53 3000 50 2 x 4° G53 3000 50 2 x 12° G53 3000 MASTERLINE 111 30 2 x 12° G53 3000 45 2 x 12° G53 3000 45 2 x 22,5° G53 3000 60 2 x 4° G53 3000 60 2 x 12° G53 3000 60 2 x 22,5° G53 3000 HSG (QT) QUARTZ TUBULAR 12V 20 G4 3000 350 50 GY 6,35 3000 1000 90 GY 6,35 3000 1900 MAINS VOLTAGE HALOGEN LAMPS 25 G9 2900 250 75 G9 2900 1050
LAMP DATA SHOWN IN THIS CATALOGUE ARE NOT BINDING, PLEASE REFER TO LAMP MANUFACTURER DATA FOR EXACT CONFIRMATION. BEFORE PROCEEDING TO ANY INSTALLATION, ALWAYS CHECK SUITABILITY OF THE LAMP FOR THE DESIRED APPLICATION. REGGIANI SPA ILLUMINAZIONE RESERVES THE RIGHTS TO TAKE INTO CONSIDERATION THE ORDER FOR LAMPS IN RELATION TO THE CUSTOMER’S REQUIRED QUANTITY AND TO THE MINIMUM PURCHASE LOT OF GOODS FIXED BY THE LAMP MANUFACTURERS.
455
LIGHT SOURCES
Abbr. Description Watt Beam width Lampholder Col. temp (k) Lumen ImHRGI HI SPOT 50 2 x 12,5° GU10 2700 50 2 x 25° GU10 2700 HEGPAR (D) PAR 20 50 2 x 5° E27 2900 50 2 x 15° E27 2900 PAR 30 75 2 x 5° E27 2900 75 2 x 15° E27 2900 100 2 x 5° E27 2900 100 2 x 10° E27 2900 HEGPAR PAR 38 75 2 x 5° E27 3100 75 2 x 15° E27 3100 120 2 x 6° E27 3100 120 2 x 15° E27 3100 HSG (QT) HALOGEN LAMPS QT 32 70 E27 2900 1180 100 E27 2900 1800 150 E27 2900 2870 205 E27 2900 4200 HDG (QT-DE) QUARTZ TUBULAR 74,9 mm 120 R7s 2950 2300
QUARTZ TUBULAR 114,2 mm 150 R7s 3000 2200 200 R7s 3000 3200 230 R7s 3000 5000
LAMP DATA SHOWN IN THIS CATALOGUE ARE NOT BINDING, PLEASE REFER TO LAMP MANUFACTURER DATA FOR EXACT CONFIRMATION. BEFORE PROCEEDING TO ANY INSTALLATION, ALWAYS CHECK SUITABILITY OF THE LAMP FOR THE DESIRED APPLICATION. REGGIANI SPA ILLUMINAZIONE RESERVES THE RIGHTS TO TAKE INTO CONSIDERATION THE ORDER FOR LAMPS IN RELATION TO THE CUSTOMER’S REQUIRED QUANTITY AND TO THE MINIMUM PURCHASE LOT OF GOODS FIXED BY THE LAMP MANUFACTURERS.
456
INSTALLATION NOTES
INSTALLATION OF “TRIMLESS” LUMINAIRES
The spotlight support is fitted into the plasterboard false ceiling (thickness 9-12.5-15mm) and plaster is smoothed around the hole.
The side tabs need to be eliminated for the support to be fitted into the 15mm thick false ceiling
Cut out hole, size required Fit support Fix support with self tapping screws
Plaster Smooth Paint
Fit luminaire body into ceiling cut-out Apply IOS reflector
12,5 mm
9 mm
15 mm
457
INSTALLATION NOTES
INSTALLATION OF LUMINAIRES “WITH BEZEL”
The bezel is placed over the hole in the false ceiling, then fixed using the innovative ClikFix retainer device.
Cut out hole, size required Place bezel over hole
View from ceiling void Push down on ClikFix retainer device
until it clicks
Install bezel
Fit luminaire body into ceiling cut-out
Remove IOS reflector Remove luminaire
To remove the bezel, twist the ClikFix retainer device upwards using a screwdriver or othersuitable tool inserted between spring clip and support pin
Apply IOS reflector
458
GENERAL INFORMATION FOR DOWNLIGHTS
MINIMUM CEILING RECESS DIMENSIONS (mm)
(reference standards: CEI EN 60598-1:1998-01 CEI EN 60598-2-2:1997-06)
CONTAINER FOR CONCRETE CEILINGS
INSTALLATION INSTRUCTIONS1 Prepare the container for installation by fastening the cover on the formwork with nails or screws.
2 Drill the bottom of the container with holes and prepare the empty conduits for the power supply making sure no concrete is drawn in.
3 Engage the indentations at the bottom of the container in the holes on the cover.
4 Remove the formwork to gain access to the ceiling recess. In the case of concrete ceilings with lined surface, fit the ceiling recess in the concrete by means of an expanded polystyrene cylinder (remove after grouting). Drill the ceiling cut-out in the lined surface, then proceed to install the luminaire.
N.B.: The safety transformer for very low safety voltage luminaires or the remote control gear for luminaires with discharge lamps, should be located outside the container in a well ventilated place easily accessible for inspection when required.
SIMBOL
Installation allowed on normally inflammable surfaces **
Certain maximum temperatures are laid down on the ceiling recess surfaces referred to an ambient temperature of 25°C such as:
max 90° (+5°C tolerance) at 1.06Vnom. (normal operation) (on mounting surface, ceiling cut-out, side walls and top of recess)max 130° (+5°C tolerance) at 1.1Vnom. (abnormal operation) (on mounting surface, ceiling cut-out, side walls and top of recess)
N.B. Never, under any circumstance, cover the luminaire with insulating material or the like.For products not marked with there are no max. temperature limits on the mountingsurface. Leave a distance of 25 mm in addition to the ceiling recess depth (referred to thehighest point of the luminaire).
INSULATION CLASSES
REFERENCE STANDARD: CEI EN 60598-1 : 1998-01
CLASS I LUMINAIRE Luminaire in which protection against electric shocks is not just based on the basic insulation but also on an additional safety precaution consisting of connecting the accessible conductive parts to a safety conductor (earth) which is part of the fixed electrical installation thus preventing the accessible conductive parts from becoming dangerous in the event of a failure in the basic insulation.
CLASS II LUMINAIRE Luminaire in which protection against electric shocks is not just based on the basic insulation but also on an additional safety precautions consisting of double reinforced insulation. These precautions do not require earthing devices and do not depend on installation conditions.
CLASS III LUMINAIRE Luminaire in which protection against electric shocks is based on the very low safety supply voltage and no voltages are produced higher than this.
A Class III luminaire must never be provided with earthing
D50/70
50/75
D50/75
50/75
25 mm (= 0 se )
D = min. distance specified by the luminaire manufacturer.
** Normally inflammable material.Material whose ignition temperature is at least 200°C and which does not deform or soften at such temperature.Examples: wood and material made with wood over 2 mm thick.The ignition temperature and resistance to deformation or softening of normally inflammable materials are based on values which are widely proven and determined by a test with duration of 15 minutes.
459
LIGHT AS CAUSE OF COLOUR FADING
In order to minimize fading of light-sensitive objects, the use of UV filters is recommendedand/or lamps with limited UV emission.Efficiency of the UV filters depends on the level of illumination (lux), the distance of the light sought, exposure time and sensitivity of the individual objects to light.
CORRECTION FACTORS
CALCULATION OF MAX. EXPOSURE TIME
T max = T x F x 1000 lux on object
Example:suppose a class 3 fur (rather delicate) is illuminated by metal halide lamps average of 500 lux:- with normal glass T max = 300 x 1,5 x 1000 = 900 hours 500
- with anti-UV filter T max = 300 x 2,5 x 1000 = 1300 hours 500
Suppose, instead, a spot light of 10,000 lux is to be used:- with normal glass Tmax = 45 hours;- with anti-UV filter Tmax = 75 hours.
INSTALLATION NOTES
Colour fading of materials depends on various factors. Those associated with light are:- resistance of the object to light;- quantity of light on the object;- exposure time;- type of light.DIN STANDARD 54004 (test for colour fastness of textiles 8/93) defines 8 classes of resistance.Time T (maximum exposure time to natural light of 1000 lux without any appreciable fading effects) is determined according to experimental tests (*).* source: OSRAM technical information B/84
CLASS DIN 54004 TIME T (HOURS) 1 70 2 150 3 300 4 600 5 1200 6 2500 7 5000 8 10000
(the higher the class = the greater the resistance to colour fading)These exposure times can be increased if artificial light is used with protective shielding.
LUMINAIRES FOR HALOGEN LAMPS WITH DICHROIC REFLECTORLuminaires for halogen lamps with dichroic reflector are supplied with safety glass to be placed in front of the lamp. When using halogen lamps with dichroic reflectors already fitted with glass, the safety glass included in the luminaire kit should be eliminated.
GENERAL INFORMATION FOR DOWNLIGHTS
LAMP TYPE CORRECTION FACTOR F
NORMAL GLASS ANTI-UV FILTER
HALOGEN 2 4
FLUORESCENT 2 4
METAL HALIDE 1,5 2,5
IP x x x TABLE OF IP RATINGS
IP CLASSIFICATIONSThe degree of protection the luminaire provides against the ingress of dust and moisture is classified according to the Ingress Protection (IP) System.The protection degree for each type of luminaire we manufacture tells you the type ofprotection that we guarantee when a luminaire comes in contact with either solid foreignbodies or from the ingress of moisture.
IP Symbol Description
0 No-Protection
1_
Protection against solid objects 50 mm
2_
Protection against solid objects 12 mm
3_
Protection against solid objects 2,5 mm
4_
Protection against solid objects 1 mm
5 Dust-protected and protection against access with a wire
6 Dust-tight and protection against access with a wire
IP Symbol Description
0 No-Protection
1_
Protection against dripping water (vertically falling drops)
2_
Protection against dripping water tilted 15 deg
3 Protection against rain
4 Protection against splashing water
5 Protection against water jet
6 Protection against heavy seas
7 Protection against the effects of immersion
8 ...m Protection against the effects of submersion
IP Symbol Description
0 No-Protection
1 150g10 cm
Protection against an impact energy of 0.15 J of a 150 g object dropped from a height of 10 cm
2 200g10 cm
Protection against an impact energy of 0.20 J of a 200 g object dropped from a height of 10 cm
3250g
15 cmProtection against an impact energy of 0.35 J of a 250 g object dropped from a height of 15 cm
4250g
20 cmProtection against an impact energy of 0.50 J of a 250 g object dropped from a height of 20 cm
5350g
20 cmProtection against an impact energy of 0.70 J of a 350 g object dropped from a height of 20 cm
6250g
40 cmProtection against an impact energy of 1 J of a 250 g object dropped from a height of 40 cm
70,5kg
40 cmProtection against an impact energy of 2 J of a 0.5 Kg object dropped from a height of 40 cm
81,25kg
40 cmProtection against an impact energy of 5 J of a 1.25 Kg object dropped from a height of 40 cm
92,5kg
40 cmProtection against an impact energy of 10 J of a 2.5 Kg object dropped from a height of 40 cm
105kg
40 cmProtection against an impact energy of 20 J of a 5 kg object dropped from a height of 40 cm
1a NUMBER: protection against the ingress of solid foreign bodies and access to hazardous parts
2a NUMBER: protection against harmful ingress of water
3a NUMBER: protection against external mechanical impacts
460
GENERAL INFORMATION FOR DOWNLIGHTS
HPF CONTROL GEARS
All kinds of lamps, whether discharge or fluorescent require a device to control the power supply current. This task can be performed by electromagnetic control gear whose characteristics correspond to those of the lamp in question. In other words, a non-specific control gear cannot power a lamp.The most economical way of powering a lamp is to use an electromagnetic control gear, which is known to have long life (over 25 years) providing the indications given in the assembly instructions provided with all luminaires are respected (for example: never cover a recessed Luminaire and its control gear with insulating material, and do not recess surface-mounted Luminaires – even if only partially).To ensure the lamps function correctly – and to avoid reducing their chromatic yield and life – it is equally important to ensure that the power supply voltage is almost completely constant, that is, with a tolerance of +/-3% with respect to the rated value. Any fluctuation beyond the values indicated may seriously damage the lamp. Electromagnetic control gear is not however capable of stabilising the voltage, so the mains voltage must guarantee the constancy required. As a result, when a Luminaire using electromagnetic Control Gear is purchased, the rated power supply voltage and frequency values must be specified, so that the most suitable control gear may be identified.The life of the lamp is very important. In fact, when a lamp burns out, the “rectifying effect” occurs, thus restoring the control gear, and therefore also the ballast, to their maximum operating conditions.For this reason, all Reggiani control gears are equipped with self-resetting thermal device. The electromagnetic ballast must be fitted (except in systems with centralised phasing) with a capacitor with power factor correction that limits the reactive power, and therefore the current in the circuit. A reduced current enables the cross section of the cables to be decreased, thus making the systems more economical and reducing heat losses. Having realised the benefits given by the capacitor with power factor correction, Reggiani adopts this device in all its luminaires using electromagnetic control gear.The rectifying effect that occurs with a burnt out lamp also has negative effects on the capacitor with power factor correction itself. For this reason, Reggiani luminaires with HPF control gear are also equipped with safe capacitors, designed in respect of the latest CEI EN 61048:2000-11 standards.When discharge lamps (metal halide and sodium vapours) are used, the electromagnetic ballast and the capacitor must be fitted with an Ignitor, essential to generate the high voltage pulse (up to 5kV) necessary to start the lamp.The safest Ignitor is the superimposed type – adopted by Reggiani – which does not use the control gear to produce the high voltage necessary for starting. In fact, the control gear, which must withstand the high voltage, may find itself in a critical situation whenever the lamp does not start, as the starting command is persistent.Bearing in mind these problems, the safest combination – is HPF control gear – A ballast with thermal protection, a capacitor (manufactured in accordance with the standards mentioned above) and a timed Ignitor. The latter has the advantage of stopping the starting command after a pre-set time (maximum 20 minutes), thus avoiding unnecessary stress on the control gear.This is what Reggiani has done, adopting in its control gears a digital superimposed timed Ignitor – with timed control of the pulse by means of a microprocessor – which also enables the control gear to be installed from a remote location, a reduction of radio emissions and hot re-ignition times.Another advantage of HPF control gears is that they respect the European Electromagnetic Compatibility Directives, so there is no need for interference filters.
HF CONTROL GEARS FOR METAL HALIDE LAMPS,220/240V AC 50/60Hz
Metal halide lamps may benefit considerably from the use of HF control gears.Lamps are sensitive to sudden changes in voltage – which affect their chromatic yield and their life – and the use of a HF control gears enables the changes in Colour temperature of the lamp according to the voltage to be maintained within narrower tolerance limits.
The main advantages of HF control gears are:
— no strobe effect;
— control of lamp voltage independent of the mains voltage;
— improved colour stability irrespective of the mains voltage, for the entire life of the lamp;
— longer life of the lamp as a result of controlled ignition and hot re-ignition;
— rapid, automatic disconnection of a burnt out lamp from the mains power supply, to prevent it from exploding;
— rapid cold ignition (50% of the luminous intensity is reached in half the time required by HPF control gears);
— energy saving, due to limited power supply losses;
— Broad working voltage limits (198-264V), which cancels the effects of sudden changes in the mains power supply, which is particularly useful in environments where operating machines (heat pumps, air-conditioning systems, industrial refrigerators, mixers, etc.) are installed. In these situations, luminaires equipped with a HPF control gear should not be used; while the adoption of a HF control gear, with luminaires distributed equally across the three phases, solves the problems caused by sudden changes in voltage.
In luminaires with remote control gear, the HF control gear is more flexible than conventional control gear; in fact, it can be set at a maximum distance of 3m from the Luminaire, maintaining the level of radiated electromagnetic interference unchanged.
461
GENERAL INFORMATION FOR DOWNLIGHTS
TABLES FOR BALLAST-LAMP CLASSIFICATION
Classification of ballast-lamp circuits for energy efficiency in lighting
HF CONTROL GEARS FOR FLUORESCENT LAMPS,220/240V AC 50/60Hz.
Current fluorescent lamps – sensitive to sudden changes in voltage, which drastically reduce their chromatic yield and life – may benefit from the use of HF control gears, as they maintain the luminous flux within narrower tolerance limits and considerably reduce energy losses.
In brief, the main advantages of HF control gears are:
— no flicker at power on;
— no strobe effect during normal operation, due to the high working frequency > = 40 kHz;
— noise-free operation, an important characteristic for environments that require absolute silence, or at least the absence of background noise (theatres, concert halls, etc.);
— lamp voltage control independent of the mains voltage;
— improved stability of the luminous flux, irrespective of the mains voltage, for the whole life of the lamp;
— longer life of the lamp (with an increase of 30-50% compared to a conventional control gear), due to controlled ignition and hot re-ignition. This characteristic is what makes the HF control gear the most suitable device for applications which require more than three power on/off cycles a day;
— rapid, automatic disconnection of the mains power supply when a fault is found in the lamp;
— energy saving, due to the limited power supply losses (25-30% less than those of a HPF control gear); CELMA classification: A1/A2
— broad working voltage limits (198-264V), which cancel out the fluctuations in the mains power supply, which is particularly useful in environments where operating machines (heat pumps, air-conditioning systems, industrial refrigerators, mixers, etc.) are installed. In these situations, luminaires equipped with a HPF control gear should not be used; while the adoption of a HF control gear, with luminaires distributed equally across the three phases solves the problems caused by sudden changes in voltage;
— direct current operation, in installations with an emergency light, in accordance with the VDE0108 standard.
— Important: When connecting independent control gears in cascade, “a maximum of six luminaires can be used*
*when using the terminals of the control gears themselves.
Linear CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
T 50Hz HF
15W 13.5W FD-15-E-G13-26/450under
consideration16W 18W 21W 23W
18W 16W FD-18-E-G13-26/600under
consideration19W 21W 24W 26W
30W 24W FD-30-E-G13-26/895under
consideration31W 33W 36W 38W
36W 32W FD-35-E-G13-26/1200under
consideration36W 36W 41W 43W
38W 32W FD-38-E-G13-26/1047under
consideration36W 40W 43W 45W
58W 50W FD-56-E-G13-26/1500under
consideration55W 59W 64W 67W
70W 60W FD-70-E-G13-26/1800under
consideration68W 72W 77W 80W
Compact 2 tubes CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
TC-L 50Hz HF
18W 16W FSD-16-E-2G11under
consideration19W 21W 24W 26W
24W 22W FSD-24-E-2G11under
consideration25W 27W 30W 32W
36W 32W FSD-36-E-2G11under
consideration36W 38W 41W 43W
40W FSD-40-LP-2G11under
consideration44W 46W
55W FSD-55-LP-2G11under
consideration59W 63W
Compact 4 tubes flat CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
TC-F 50Hz HF
18W 16W FSS-18-E-2G10under
consideration19W 21W 24W 26W
24W 22W FSS-24-E-2G10under
consideration25W 27W 30W 32W
36W 32W FSS-36-E-2G10under
consideration36W 38W 41W 43W
Compact 4 tubes CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
TC-D / TC-DE 50Hz HF
10W 9.5WFSO-10-E-G24q=1FSO-10-I-G24d=1
under consideration
11W 13W 14W 16W
13W 12.5WFSO-13-E-G24q=1FSO-13-I-G24d=1
under consideration
14W 16W 17W 19W
18W 16.5WFSO-18-E-G24q=2FSO-18-I-G24d=2
under consideration
19W 21W 24W 26W
26W 24WFSO-26-E-G24q=3FSO-26-I-G24d=3
under consideration
27W 29W 32W 34W
Compact 6 tubes CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
TC-T / TC-TE 50Hz HF
18W 16WFSM-18-I-GX24d=2FSM-18-E-GX24q=2
under consideration
19W 21W 24W 26W
26W 24WFSM-26-I-GX24d=3FSM-26-E-GX24q=3
under consideration
27W 29W 32W 34W
32W FSMH-32-UP-GX24q=4under
consideration36W 39W
42W FSMH-42-UP-GX24q=4under
consideration46W 49W
Compact 2 D CLASS
Lamp type Lamp powerIlcos code A1 A2 A3 B1 B2
TC-DD / TC-DDE 50Hz HF
10W 9WFSS-10-E-GR10qFSS-10-L/P/H-GR10q
under consideration
11W 13W 14W 16W
16W 14W
FSS-16-I-GR8FSS-16-E-GR10q
FSS-16-L/P/H-GR10q
under consideration
17W 19W 21W 23W
21W 19W
FSS-21-E-GR10q
FSS-21-L/P/H-GR10qFSS-28-I-GR8
under consideration
22W 24W 27W 29W
28W 25WFSS-28-E-GR10qFSS-28-L/P/H-GR10q
under consideration
29W 31W 34W 36W
38W 34WFSS-38-E-GR10qFSS-38-L/P/H-GR10q
under consideration
38W 40W 43W 45W
55WFSS-65-E-GRY10q=3FSS-65-L/P/H-RY10q=3
under consideration
59W 63W
462
GENERAL INFORMATION FOR DOWNLIGHTS
1-10V DC DIMMABLE HF CONTROL GEARS,220/240 V ac 50/60 Hz
The evolution of lighting systems is towards a more rational use of light sources. In this sense, an important role is played by dimming/regulating systems, of which the 1-10 V DC analogue version represents the simplest and most economical solution.The typical applications of these systems are offices, conference rooms, cinemas, andtheatres, that is, all environments in which a fine adjustment of the lighting is necessary.luminaires normally work in combination with other devices (presence detectors, light sensors, etc.), so as to obtain different kinds of control systems, which may be classified as follows.
Manual ControlUsing remote control units, with the built-in 1-10V DC control gear, simple and economical adjustable systems can be set up. The control units can handle up to 50 Luminaires, over a maximum distance of 50m (a combination of two or more regulating units may not be used in any cases).There are two types of control unit: with a knob (rotary regulation) or a pushbutton (which, when pressed for less than half a second, powers the light on/off; if it is pressed for more than half a second, flux adjustment begins, from the minimum to the maximum value; when the pushbutton is released, adjustment stops; when the pushbutton is pressed – with the Luminaire on – for more than half a second, adjustment is resumed, decreasing the flux to the minimum value). If the on/off switch is built into the control unit, a maximum of 10 lamps or 5 x 2 luminaires can be combined. Consequently, in a system with 50 Luminaires, the wiring diagram must conform to the figure below.
NL3
L2
L1
NL
L J-+
L1 L2 L3 N - +{
DIM ECG
DIM ECG
DIM ECG
Max. 50 DIM ECG
Manual Control Unit
Automatic ControlBy combining dimmable luminaires with presence and light sensors, the emission of light is optimised, with energy saving of up to 60%, and the higher initial cost of the luminaires is covered in the medium term.
Building AutomationIn addition to the automatic light control system, light control is centralised through the use of computers and dedicated software.
The use of dimmable luminaires imposes the following functional restrictions:— if the room temperature is less than 15°C, ignition of the lamps may represent a problem, especially if the flux is regulated to the minimum; in this case, to facilitate power-on, the flux must be regulated to the maximum;— during regulation, the flux and colour temperature of the lamp may vary; they will stabilise within a time of about 30-40 minutes; this effect may be accentuated with amalgam lamps dentified by “IN”.
DIGITAL DIMMABLE HF CONTROL GEARS220/240 V ac 50/60 Hz
There are lighting systems that require high visual comfort, a flexible and creative use of light as a fundamental component of the architecture of interiors and maximum energy efficiency.Other requirements include the necessity to balance artificial light with natural light, to have power-on controlled by presence detectors and to integrate lighting with other building automation systems (anti-intrusion control, fire-fighting control etc.). Well, not only are all these requirements satisfied, the emission of light can be optimised to obtain an energy saving of 60%, which enables the higher initial cost of the luminaires to be covered in the medium term.
In fact, we now have a new standard of HF control gears, which may be interconnected on an interference-free digital communication network, called “DALI”.DALI is not a system but the definition of an interface, the same for all manufacturers, which allows communication between a control module and the HF control gears, on a digital network of up to 64 users. Each individual HF control gear can be identified (addressed) and programmed through the control module; in addition, each Luminaire can be assigned to 16 freely definable groups, irrespective of its actual position, and can save up to 16 different technical lighting values (scenarios). As each HF control gear can be assigned to more than one group, an infinite number of scenarios can be designed, with a smaller number of components than that required by comparable system (1-10V).
But the functional advantages of a DALI HF control gears go well beyond the possibilitiesoffered by the 1-10V interface:— each HF control gear can return operating status signals (for example, lamp ON/ OFF, lamp current or lamp fault), which are an essential condition for integrating lighting devices into the most complex building control systems);— the system can be set so that all the HF control gears reach the desired level of regulation at the same time, even if they start from different levels of illuminance;— there are no limits to the number of changes between on/off statuses because they can be executed directly through a digital signal without having to use relays;— the luminous flux can be regulated from 1-100%, with a logarithmic curve. As the human eye is sensitive to changes in the flux – in particular between 0 and 10% – irregularities and rapid changes are annoying, and only a digital device with a logarithmic regulation enables a pleasant, gradual increase in the flux from 1 to 100%;— the regulating times can be programmed;— the maximum distance between the control module and the most distant Luminaire is 300m, if the cross section of the signal cable is at least 1.5 mm2;— a five-pole cable can be used, or the control cables can be laid with the mains voltage cables, providing an NYM 5x1.5 mm2 cable is used.
The fact that the DALI system is easy to use emerges as soon as it is put into operation. In fact, the routines for detecting and addressing the components connected, present in the control module, are largely automatic; the user simply has to complete the settings, such as diversify the scenarios or modify the groups of luminaires.
463
GENERAL INFORMATION FOR DOWNLIGHTS
To complete the information about the contribution of the harmonic currents in a lightingsystem, we provide the following table, which indicates the consumption values in thestationary state, for the power values of the various control gears, and the value of theharmonic components up to the 13th.
HF control gears for fluorescent lamps
13W 2x13W 18W 2x18W 26W 2x26W 32W 2x32W 42W 2x42W
In 0,080 0,16 0,1 0,19 0,14 0,26 0,17 0,34 0,22 0,46
2a 0,002 0,003 0,002 0,004 0,003 0,005 0,003 0,007 0,004 0,009
3a 0,022 0,043 0,027 0,051 0,038 0,070 0,046 0,092 0,059 0,124
5a 0,008 0,016 0,010 0,019 0,014 0,026 0,017 0,034 0,022 0,046
7a 0,006 0,011 0,007 0,013 0,010 0,018 0,012 0,024 0,015 0,032
9a 0,004 0,008 0,005 0,010 0,007 0,013 0,009 0,017 0,011 0,023
11a 0,002 0,005 0,003 0,006 0,004 0,008 0,005 0,010 0,007 0,014
13a 0,002 0,005 0,003 0,006 0,004 0,008 0,005 0,010 0,007 0,014
HF control gears for metal halide lamps
35W 70W 150W
In 0,210 0,4 0,75
2a 0,004 0,008 0,015
3a 0,057 0,108 0,203
5a 0,021 0,040 0,075
7a 0,015 0,028 0,053
9a 0,011 0,020 0,038
11a 0,006 0,012 0,023
13a 0,006 0,012 0,023
HPF control gears for metal halide lamps
35W 70W 150W
In 0,530 0,98 1,8
2a 0,011 0,020 0,036
3a 0,143 0,265 0,486
5a 0,053 0,098 0,180
7a 0,037 0,069 0,126
9a 0,027 0,049 0,090
11a 0,016 0,029 0,054
13a 0,016 0,029 0,054
As a precaution, the protection device is to be chosen bearing in mind the CEI EN60598-1:2001 standard for Luminaires, which limits the current dispersion on the ground wire to 1mA for every class I luminaire installed.Finally, even if the control gear is class II, to reduce electromagnetic interference to a minimum, the earth wire should be connected.
ELECTRIC LIGHTING INSTALLATIONS.INFORMATIVE NOTES.
To ensure that the luminaires equipped with a HF control gear function correctly, the following design constraints of the electrical system must be respected:
— split the luminaires equally between the three power supply phases;
— systems with fluorescent lamps: connect a maximum of 48 1x18W-1x42W luminaires or 20 2x32W-2x42W Luminaires, under the same thermal circuit breaker of the C-16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard while – to identify the actual consumption – reference should be made to the CELMA table);
— systems with a HF control gear and discharge lamps: connect a maximum of 15 35W Luminaires, or 10 70-150W Luminaires, under the same thermal circuit breaker of the C–16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard);
— systems with HPF control gear and discharge lamps: connect a maximum of 12 35W Luminaires, or 10 70W luminaires and 6 150W Luminaires, under the same thermal circuit breakerof the C–16A type (these limits are calculated considering a power supply cable with a length of 15m, and 2.5mm2 wires; to size the cables correctly, reference should be made to the relevant standard);
— discharge Luminaires: connect the terminal – identified by the symbol /Lamp of the control gear – to the corresponding pole/terminal, also identified on the luminaire;
— another factor that affects the size of the power supply cables is the emission of the harmonic currents allowed for the Luminaires. The 61000-3-2:/A14:2001 standard establishes – for all luminaires with an input current of less than 16A – the harmonic current limits indicated in the table below.
30%
25%
20%
15%
10%
5%
%2 3 5 7 9 11 13
HARMONIC DISTORTIONS OF SUPPLY CURRENT
Pe
rmis
sib
le h
arm
on
iccu
rre
nt
(%)
Harmonic order
464
GENERAL INFORMATION FOR DOWNLIGHTS
EMERGENCY LUMINAIRES FOR FLUORESCENT LAMPS
There are two categories of safety or emergency Luminaires:— permanent: emergency lamps are powered even when the normal lighting is working;— non-permanent: the emergency lamps are only turned on when the ordinary lighting is not working.
In addition, the emergency Luminaires – in particular, those manufactured by Reggiani – are of a combined type (in a Luminaire containing two or more lamps, at least one is powered by the emergency circuit) or self-contained (all the elements – battery, control unit, power-off and signalling devices – are incorporated in or adjacent to the Luminaire; in the latter case, the remote pack must respect some requirements, such as the IP 40 protection degree, isolation class II and essentially of allowing use as an independent element).
The operating modes laid down by the EN 60598-2-22 standard are equally important:— The emergency luminaires must be suitable for direct installation on normally inflammable surfaces (see F mark);— in combined Luminaires, if the emergency circuit lamps and the normal power supply lamps are different, the types must be clearly identified, while the emergency Lampholders must be marked with a green spot, visible during replacement of the lamp (the emergency circuit lamps must always be of the 4-pin type);— the self-contained emergency luminaires must have a signalling device visible during normal use (for example, an LED), which indicates when the battery is being charged, electrical continuity and the functioning of the emergency lamp.
The batteries used in the Reggiani packs are Ni/Cd (of the 3.6V-4Ah type for lamps of up to 26W FSQ, and 6 V-4Ah for 32/42W FSMH lamps); they do not require maintenance and normally give at least four years of normal operation.During emergency operation, which starts when the mains voltage drops below 85% of its standard value, the luminaires must be activated within 0.5s, provide 50% of the declared luminous flux within 5s, and provide – after 60s and continuatively – the rated luminous flux for the entire time assigned to emergency operation (which is one hour in all European countries except for Great Britain where it is three hours). The luminous flux guaranteed in an emergency is between 10% and 20% of the luminous flux provided during normal operation.
The time required to recharge the batteries must not exceed 24 hours, or – in public environments (for example, hotels) – 12 hours. To ensure the efficiency and life of the emergency pack, it must be installed at the greatest possible distance from the Luminaire body (the distance allowed by the cables provided). Every six months, the functioning of the emergency lighting system should be tested and the batteries should be completely discharged and subsequently recharged, while every four years (and, naturally, whenever the specified duration of power has not been respected), the batteries should be replaced.
If the Luminaire is powered by a three-phase system, two separate lines of the same phase must be used. The preferential line to the emergency pack must never be disconnected, except for maintenance operations. With regard to this, the Reggiani emergency packs offer the interesting function of remote power-off. To do this, the disabling circuit simply has to be closed on terminals 3 and 4 of the pack, connected, respectively, to the (+) and (-) poles of a 9V battery, so as to avoid switching to emergency operation. Up to 10 luminaires may be connected to the battery in parallel.
465
GENERAL INFORMATION FOR DOWNLIGHTS
TRANSFORMERS FOR LOW VOLTAGE LAMPS
Low-voltage lamps – the most common of which are the dichroic lamps – generally require a power supply voltage of 12V, even though there are some running on 24V or 6V. Transformers capable of supplying such a low voltage are subject to very high currents, so they must be suitably protected by means of a fuse or thermal circuit breaker, both on the primary circuit and on the secondary circuit. The fuse is to be chosen taking into consideration the current of the secondary circuit, which is more than 20 times as high as the input current. For example, in a 100VA transformer, supplied at 230V, the input current is 0.4A; but the output current (with a voltage of 12V) reaches 7.5A, a value comparable with the one present in a 2000W electric oven.As a result of these currents, the wires that connect the lamp to the transformer must have a limited length and an adequate cross section, so as to reduce voltage drops. For further details, see the table below.
To limit the installation costs, more than one lamp is normally powered by a single transformer. This choice is only correct if the following rules are respected. The power of the transformer must be equivalent to the sum of the powers of the lamps connected. In fact, an oversized transformer provides a voltage higher than 12V, determining a considerable reduction in the life of the lamp. For the various lamps to have an equivalent chromatic yield and light emission, the transformer connecting cables must have the same length. When one of the lamps connected burns out, it must be replaced quickly, to prevent the others – supplied with too much power – from deteriorating.
When the transformer for low-voltage lamps is not built into the Luminaire, it is necessary to choose one:
— that is suitable for assembly on flammable surfaces, that is, with the mark
— that is protected against solid foreign objects, that is, with a protection degree of IP 40. — whose safety class is II
— the transformer must be suitable for assembly as an independent element
— if it is of a conventional type (HPF), the transformer must be a safety transformer resistant to short-circuits, over voltages and over temperatures
— if HF, the transformer must be immune to electromagnetic interference, in accordance with the EN61547 standard, and meet the requirements laid down by the EN61000-3-2 (harmonics) and EN55015 (radio interference) standards, if necessary, through the use of special attenuating filters
14,00
13,50
13,00
12,50
12,00
11,50
11,00
10,50
10,00210 220 230 240 250 260
At this point, a comparison should be made between conventional transformers and HF ones. The latter ensure an almost completely constant output voltage even when there are marked fluctuations in the input voltage (with positive effects on the life of the lamp, which is about 20% longer than that of a lamp powered by a HPF transformer). Consider that an over voltage of 6% compared to the rated voltage (that is, a lamp voltage of 12.7V) reduces the life of the lamp by 50%. In addition, an excessive power supply causes the lamp to overheat, and resulting in the risk of starting a fire.
Finally, an exclusive feature of HF transformers is their excellent dimmer features, which enables the luminous flux to be regulated with the phase cut executed by a potentiometer.
Table 1S = CONDUCTOR CROSS SECTIONL = DISTANCE TRANSFORMER: LAMP
AMPERE- W V
12 V=Wx1 24 V=Wx2 6 V=W:2
S1.0 mm2 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2
120 W1 m 180 W 240 W 380 W 550 W
80 W2 m 110 W 200 W 320 W 500 W
40 W4 m 55 W 140 W 160 W 250 W
25 W6 m 35 W 65 W 100 W 160 W
20 W8 m 25 W 50 W 80 W 120 W
10 W1 m 20 W 40 W 65 W 100 W
L
466
FRAMING PROJECTORS
Code 0.01912.00 for round, square and rectangular light frames and code 0.07397.00 for square and rectangular light frames. A system of lenses designed to take the four plates supplied, three of which have holes in them (diameters 6/14/20 mm) while one is blank. When one plate only is inserted, a round beam of light will be obtained, its size depending on the distance between the illuminating body and the surface to be illuminated / size of the hole made in the plate, while the blank plate is suitable h for customizing by the h customer to suit his own requirements.
h
Ø
LuxØ 6 mm Ø 12 mm Ø 20 mm
Code 0.01913.00 and code 0.07395.00 for round light frames.A system of lenses which incorporates a “diaphragm” allowing precision adjustment of light frames.
Framing projectors for luminaires with the Polyblok® system, designed for halogen lamps with dichroic reflector.
Ø 6 50 W 27°
h 1 2 3 4 5
Ø 0,14 0,22 0,38 0,40 0,50
lux 3300 1000 430 230 170
Ø 14 50 W 27°
h 1 2 3 4 5
Ø 0,25 0,50 0,70 1,0 1,5
lux 3900 1000 430 230 150
50 W 24° Max lux
h 1 2 3 4 5
Ø 0,45 0,92 1,40 1,90 2,30
lux 4000 1100 450 250 150
50 W 24° Min lux
h 1 2 3 4 5
Ø 0,1 0,2 0,28 0,38 0,49
lux 3800 1000 500 250 160
Ø 20 50 W 27°
h 1 2 3 4 5
Ø 0,33 0,66 1,0 1,4 1,7
lux 3800 1000 430 220 140
467
FRAMING PROJECTORS
h
D
Lux
When all four plates are fitted into the body by inserting the ends opposite to those with the holes in them, square, rectangular, or diamond-shaped light frames can be obtained easily and economically.
50 W 27° Max lux
h 1 2 3 4 5
D 0,30 0,60 0,95 1,22 1,55
lux 4100 1000 450 250 180
50 W 27° Min lux
h 1 2 3 4 5
D 0,05 0,10 0,17 0,22 0,26
lux 3500 850 450 250 170
468
CERTIFICATIONS
All luminaires manufactured by Reggiani spa Illuminazione and shown in this catalogue
conform to Italian standard CEI EN 60598-1,
classification 34-21 IEC 60598-1 (and relative parts 2).
Recessed luminaires are manufactured according to standard CEI EN 60598-2-2, while
surface mounted luminaires are manufactured according to standard CEI EN 60598-2-5.
All Reggiani spa Illuminazione products fall within the field of application of
European directives: 2006/95/CE, EMC 2004/108/CE
469
ISO 14001 certification
The Reggiani environmental management system is ISO 14001 certified:
recognition of a concrete commitment to environmental sustainability.
Our way of making light has always been highly tangible. Likewise our management of the
environmental issue is not limited to mere statements of principle, it envisages actions
that, day in and day out, make a real contribution to keeping the environmental impact of
corporate activities under control and systematically seeking to improve them in a manner
that is coherent, effective and sustainable.
It is a mindset, a lifestyle that affects our each and every action, the strategy guiding our
basic choices and daily decisions within an integrated system that pays utmost attention to
reducing energy consumption and CO2 emissions, applied to reduce everything from light
pollution, to paper wastes and shipping costs.
Today, Reggiani luminaires fit with the IOS system are among those with the lowest energy
consumption and thus help reduce CO2 emissions. Considering environmental protection
as top priority also guides our corporate design and industrial choices. Thus, when
choosing production technologies, materials and suppliers, we consider quality and eco-
sustainability along with economic parameters.
It is a way of investing in the most important project that affects us all: our future.