REQUEST FOR PROPOSAL (RFP)...Request for proposal (RFP) RFP title: Supply, installation, testing, commissioning and training of Television & Community Radio Station equipments and

RFP for SITC of TV, CRS and Lightings equipments for the TV studio at KTUJM Page 1 of 60

REQUEST FOR PROPOSAL (RFP)

Supply, Installation, Testing, Commissioning and Training of TV &

Community Radio Station equipments and Studio lightings

FOR

Kushabhau Thakre Patrakarita Avam Jansanchar

Vishwavidyalaya (KTUJM), Raipur, Chhattisgarh.

RFP Ref No: BECIL\KTUJM\CTGD\TV & CRS\EQUIP\II\2017-18

Broadcast Engineering Consultants India Limited

(A Government of India Enterprise) (A Mini Ratna Company)

Corporate office: BECIL Bhavan, C-56, A/17,Sector-62,Noida-201301, U.P. Tel : 0120-4177850, Fax : 0120-417787,Email: [email protected]

www.becil.com

Regional Office: House No.162, II Main, I Cross, AGS Layout, RMV II Stage, Bangalore – 560094,[email protected]

http://www.becil.com/

mailto:[email protected]


Request for proposal (RFP)

RFP title: Supply, installation, testing, commissioning and training of Television & Community Radio Station equipments and Studio lightings at

KTUJM

TABLE OF CONTENTS

SL Details

1.0 General terms and conditions

1.1. About BECIL

1.2. Background and brief on the current scope of the project

1.3. RFP Schedule and critical dates

1.4. Procedure for submission of bids and terms and conditions

1.5. Eligibility criteria

1.6. Documents required to be submitted along with the technical bid

1.7. Terms and conditions

1.8. Proposal response format

1.9. Method of evaluation and award

2.0 Technical details of the project.

2.1. Technical drawings

2.2. Un priced Bid -Listing of the equipment

2.3. Brief specification of the equipment

2.4. Detailed specification of each of the equipment

2.5. Details of the envisaged services.

3.0 Prescribed formats for bid submission

3.1 Format for providing general information of the bidder.

3.2 Format for providing details of works/services of similar nature

carried out by the bidder during the last 5 years.

3.3 Format for providing details of the on-going projects.

3.4 Format for providing details on annual turnover statement.

3.5 Format of OEM’s authorization letter.

3.6 Format for submission of EMD

3.7 Format for submission of Performance Bank Guarantee (PBG)

3.8

Format for submission of affidavit certifying that, the bidder is not

barred or blacklisted by any of the Central or State Government departments or organizations or State or central PSUs.

3.9 Format of authorization letter for signing the bid document on behalf

of bidder.

3.10 Format of the compliance/exception / deviation

3.11 Format of the financial bid

3.12 Format of the check list of the technical bid document

3.13 Format for the item wise compliance of all the items


RFP for establishment of TV studio and Community Radio Station for

KTUJM on turnkey basis.

General terms and conditions

1. General.

1.1. About Broadcast Engineering Consultants India Ltd. (BECIL): BECIL is established

by Ministry of Information and Broadcasting, Government of India in the year 1995.

BECIL is a company wholly owned by Government of India and is accorded with Mini

Ratna status. Also, BECIL has ISO 9001-2015 certification for their processes on

consultancy services and turnkey solutions in these sectors. Over the years, BECIL

has successfully provided consultancy and project execution services for number of

prestigious projects in Government and private sectors and has been recognized by the

industry as one of the leading companies in this sector. For details, please visit

www.becil.com

1.2. Background and brief on the current scope of the project: Kushabhau Thakre

Patrakarita Avam Jansanchar Vishwavidyalaya, Raipur as a University

established by Government of Chhattisgarh vide Act no 24 of 2004 has signed a

memorandum of understanding with BECIL for consultancy and project execution

services for setting up of Television and Community Radio studio along with auxiliary

facilities on turnkey basis. This RFP is consequence of this MOU for implementing the

project.

Kushabhau Thakre Patrakarita Avam Jansanchar Vishwavidyalaya, Raipur as

a University established by Government of Chhattisgarh is planning to establish an

exclusive HD TV studio and Community Radio Studio facility in its premises for the

post production and recording live coverage of educational electronic media content.

In today’s world, electronic media plays important role in dissemination of information

and education. Television is an important tool in electronic media because of its

appealing and powerful visual and audio content. Considering the importance of

imparting quality education and training in the skills of TV production, Government of

Chhattisgarh has established Kushabhau Thakre Patrakarita Avam Jansanchar

Vishwavidyalaya at Raipur – exclusively for this purpose. This project envisages

establishment of a typical Television studio along with editing facilities along with

necessary infrastructure so that, the students can operate and learn the skills

required for production of TV content along with the TV studio, KTUJM is planning to

set up Community Radio studio for production and distribution of audio content.

http://www.becil.com/


RFP schedule: RFP schedule is as follows:

Issue of RFP notification 16th June 2017

Last date of Submitting the proposals At 1500 Hrs on 7th July 2017

Opening of the technical Bids At 1530 Hrs on 7th July 2017

Opening of the financial Bids Will be intimated later

Estimated value of the project Rs.90 Lakhs

Validity of the Proposal 90 Days from the RFP due date

1.4 Procedure for submission of bids and terms and conditions:

1.4.1. Bidders are required to download RFP document from website of the Company

www.becil.com go through the RFP document carefully and seek details and

clarification from the tenderers in case doubt. The tender is for turn-key

comprehensive and optimum solution i.e supply, installation, testing,

commissioning and training of the all the equipments and services provided

including twelve months of warranty and support.

1.4.2. The proposals are to be submitted on Two Bid basis with separate Technical

(Part – I) and Financial Bids (Part – II) sealed in separate envelopes clearly

marked on the respective envelopes as “Technical Bid” and “Financial Bid”,

respectively and then submitted in a sealed cover clearly marked bids for

supply, installation, testing, commissioning and training for

establishment of Television Studio, Community Radio Station equipments

and studio lightings. The EMD and Tender Fee for the tender shall been

closed ONLY along with the Technical Bid.

1.4.3. While submitting the Technical Bid all bidders will strictly adhere to the

sequence of documents as mentioned in check list vide annexure 3.12. Each

page of the technical and commercial bid document should be properly indexed,


paginated, stamped, ink signed by the authorized signatory. The entire

document should be firmly bound, numbered and sealed.

1.4.4. The financial bid should be submitted in the exactly in the same format as

prescribed in annexure 3.11 of this document. If the bidder envisages

additional items are required for over and above the suggested one for providing

the complete solution as envisaged by BECIL, they are at liberty to provide

additional items over and above the one mentioned in the document. However,

while deciding the lowest bid, the entire offer will be considered including any

additional item quoted by the bidder for providing complete solution as per the

scope of the project. In case any additional item/ equipment is required for the

completeness of the system and bidder has not quoted for the same, bidder

shall be required to provide that item/ equipment Free of Cost (FoC).

1.4.5. The financial bid should be exactly the same as Technical bid. The bill of

material in Technical bid should be without prices. In case Financial bid does

not match with the Technical bid, the bid of the bidder shall be rejected without

seeking any further clarification.

1.4.6. Bid responses must be addressed Mrs. Usha Mangalgi, Assistant General

Manager, BECIL Regional office, House No.162, II Main, I Cross, AGS

Layout, RMV II Stage, Bangalore – 560094 and dropped in the tender box

kept in the reception counter at BECIL Regional office, Bangalore-94. The bids

can also sent by India Post or courier, but the bidder has to ensure that, the

document reaches the above address before the opening time and date. Bid

received after the due date shall be rejected without any further

clarification.

1.4.7. For queries, bidders can contact Mrs. Usha Mangalgi, Assistant General

Manager, Regional office, BECIL, Bangalore preferably over the email:

usha@bec i l . com or in person on appointment.

1.4.8. Separately sealed bids, both technical and financial, in a single sealed cover

should reach the above address on or before 15.00 hours on 7th July 2017

either by hand or India Post or courier. If 7th July 2017 happens to be public

holiday, it will be opened on next working day. This will communicated over the



BECIL website. Hand delivered offer can be dropped in the tender box

maintained in the reception desk of BECIL Regional Office,Bangalore-94. Bidder

has to ensure that, the offers sent by Post/Courier reaches before the due date

and time. BECIL will not be responsible for late delivery by Post/Courier. Bids

submitted/ received after the expiry of the above time will not be considered. It

shall be responsibility of the bidder to ensure that the bid submitted on time

and at proper place before the deadline. Bids submitted through fax and e-mails

or any other means will be rejected. Similarly unsigned and bids without EMD

will be forthright rejected without any further clarification.

1.4.9. Technical bids (Part – I) shall be opened on the same day at 1530 hours

(tentative time) in the presence of bidders who may choose to be present.

1.4.10. BID VALIDITY: All bids are to remain valid for a period of Three (3) months

from the date of last date of the bid submission.

1.4.11. At any time prior to the last date of Submission of bid, BECIL may for any

reason whether at its own initiative or in response to a clarification requested by

prospective bidder / bidders modify the RFP by an amendment which shall be

notified through the official website of BECIL - www.becil.com and will be

binding on the bidders. Therefore, it is advised that the prospective bidders

frequently visit the website and take note on any amendments during the bid

process.

1.4.12. BECIL reserves the right to either increase or decrease the quantity of any or all

the items included in suggestive bill of materials which are estimated

requirements and therefore open to variation.

1.4.13. BECIL also reserve the right to either place repeat order for any of the

equipment / item during the pendency of the work and bidder is required to

provide the same price as mentioned in the price bid.

1.4.14. BECIL reserves the right to alter/modify the scope of work mentioned in this

RFP documents at any state of the bidding process and contract.

1.4.15. The project site is at KTUJM campus, Raipur, Chattissgarh and as such all

material to be delivered and work carried out at the site. The Financial Bid (Part

http://www.ngri.org.in/


– II) shall clearly intimate the price to be charged without any qualification

whatsoever and should include all packing and forwarding, transportation,

transit insurance, taxes, duties, fees, levies and other charges as may be

applicable in relation to the activities proposed to be carried out at the above

site. All such charges should be included in the rates quoted. Price escalation

due to currency variation will not be entertained.

1.4.16. In case taxes are not mentioned separately, it will be assumed that price are

inclusive of all applicable taxes. Further in case no price is mentioned for any

equipment/ item or it left blank, it will be assumed that it will be provided free

of cost.

1.4.17. In case bidder intent to give discount on the price, it should be clearly

mentioned in the price bid and discount not mentioned in the price bid will be

accepted.

1.4.18. All the conditional bid shall be rejected without seeking any further clarification

from the bidder.

1.4.19. The successful bidder shall keep BECIL informed of the progress on each

activity on weekly basis. In case of any delay in any particular activity, the

recovery plan shall be evolved and given to BECIL for ensuring completion of all

the activities within the overall time schedule specified by BECIL. BECIL

reserves the right to terminate the contract at any stage of the work by giving 14

days notice if it is noticed that the delay occurred in any of the activities covered

under the contract cannot be made good and will affect the overall work

schedule. BECIL shall forfeit the performance Bank Guarantee of the bidder.

The decision of BECIL shall be final and binding. In case contract is terminated

BECIL will have right to get the work done on cost and risk of successful bidder.

1.4.20. BECIL reserves the right to monitor the progress and review it on day-to-day

basis. The successful bidder will be fully transparent, responsive and

demonstrate at all time that he is in position to complete the work as per the

specified time schedule.

1.4.21. The successful bidder shall be entirely responsible for the security of his

personnel, material, plant and equipments. No extra cost shall be allowed to the


successful bidder in the event to any damage occurring to the successful

bidders or any of his sub successful bidders personnel, materials, plant and

equipment whether stored on site or offsite. In the event of any damage to the

person or property of KTUJM, the same shall be made good by the successful

bidder on its cost and risk.

1.4.22. The successful bidder shall ensure that it has at all time a competent and

qualified representative available at site during the working period for the

duration of the contract. Any direction given to successful bidder’s

representative shall be deemed to have been given to the successful bidder.

1.4.23. BECIL reserves the right to solicit additional information from Bidders to

evaluate which Bid best meets the needs of the Project. Additional information

may include, but is not limited to, past performance records, lists of clients and

their feed-back, product catalogues, service manuals, drawings etc., or any

other pertinent information.

1.4.24. Additional questions, if any, should be submitted in writing to the RFP

Coordinator at the address given above, or via e-mail to usha@bec i l . com It

will be the bidder’s responsibility to check for any updated information

regarding this tender on BECIL website www.becil.com

1.4.25. BECIL will make its decision based on the ability of the Bidder(s) to meet

specific needs of the project, technical expertise of the Bidder(s), delivery

capabilities, customer references, past satisfactory performance and experience,

system completeness, etc., besides cost.

1.4.26. BECIL reserves the right to waive off any deviations; accept the whole or part

thereof, accept or reject any or all bids; and to select the Bidder(s) which, in the

sole opinion of the Project-In-charge, best meets the requirements of the project.

However the bidders whose bids have been rejected may approach BECIL to

know the reason of their rejection.


http://www.ngri.org.in/


1.4.27. All information contained in this RFP, or provided in subsequent discussions or

disclosures, is proprietary and confidential. No information may be shared with

any other organization, without prior written consent of the RFP Coordinator.

1.4.28. The RFP issued is for supply, installation, testing, commissioning and training for

establishment of Television Studio,Community Radio Station and studio lightings

part equipments on turn-key basis. The bidder is responsible for completeness of

the project in case bidder has not quoted any item/equipment required for

completeness of the project, bidder will provide the said item/equipment Free of

Cost (FOC).

1.5 Eligibility Criteria: The bidder shall fulfil the following eligibility conditions to bid

for this tender:

1.5.1. Average Annual financial turnover for the last three years should be at least

Rs.1 Crore during the last 3 financial years, ending 31st March 2016 ( 2013-

14, 2014-15 and 2015-16). The certificate from Statutory Auditor is to be

enclosed by every bidder.

1.5.2. Completion Certificate issued by client to be submitted for Experience of having

successfully completed similar works during last 5 years ending last day of

month previous to the one in which bids are invited should be either of the

following: -

1.5.2.1. Two similar completed works costing not less than the amount Rs.

50 Lakhs

OR

1.5.2.2. One similar completed work costing not less than the amount of

Rs.1.0 Crore

Similar work means, supply, installation, testing and commissioning of TV studio

project .

1.5.3. The bidder should not have been barred or blacklisted by any of the

Central/State Government departments/organizations/central PSUs at the

time of submission of bid and during last five years. An affidavit in the

prescribed format as in annexure 3.8 to be attached along with the technical

bid.

1.5.4. The bidder should have a positive net worth (Profit is to be consider – Profit

before Taxes and exceptional items) entity in last 3 financial years and should


have positive net worth. Bidder should submit Annual Report for last three

financial year (2013-14, 2014-15 & 2015-16) and certificate from Statutory

Auditors that they have positive net worth on 31/03/2017.

1.6.1 The bidders shall provide PAN, TAN, Sales Tax, Service Tax, EPF registration

certificate under their own name. The registration must be in force and shall

not expire during the course of - contract/work.

1.6.2 As a proof of meeting the eligibility criteria as per 1.5.2, the bidders shall attach

completion certificates/work orders issued by competent authority not below

the level of Executive engineer or equivalent in the case of Union/State

Government or undertakings or PSUs. The completion certificate should

contain details like nature of work, cost of the project, period and remarks on

the quality of work. In case if the customer happens to be a private company or

individual, completion certificate along with TDS issued by the customer for the

said project will be attached as proof of executed value of the work.

1.6.3 The bidders must submit Letter of Authorization in original from the OEM for

all the major equipment offered by them in the format of authorisation attached

in Section-3.

1.6.4 Solvency certificate for an amount of Rs.50 lakhs from any nationalized or

scheduled bank and issued within a period of 12 Months from the final date of

submission of the tender.

1.6.5 A copy of the last 3 financial years audited financial statement of the bidder to

be provided.

1.6.6 A copy of last three financial year’s Income tax return certificates.

1.6.1 List with details (including name of client /channel) of similar work executed in

India. Products / services used and approximate value of the project in

chronological order.

1.6.8 Particulars of the partners or related / inter-linked company in India for sales,

installation / commissioning and support (for principals/OEMS) or, principals

with whom you have a tie-up (in the case of integrators).

1.6.9 The bidder shall provide a list of Engineers along with the Technical Bid to be

engaged for this work with their academic and professional qualification in the


field of broadcasting.

1.6.10 Any other detailed information of relevance (such as market shares etc.) with

Supporting documents or references.

1.7 Terms and Conditions.

1.7.1. Tender fees: An amount of Rs 550/-(non returnable) towards the cost of tender

document is required to be deposited in the form of Demand draft issued in

favour of Broadcast Engineering Consultants India Ltd. payable at Bangalore

along with the technical bid.

1.7.2. Earnest Money Deposit (EMD) Each bidder is required to submit earnest

money deposit of Rs 2 Lakhs. EMD should be in the form of demand draft or in

the form of BG from nationalized / scheduled bank in favour of “Broadcast

Engineering Consultants India Ltd” payable at Bangalore. The EMD shall be

part of the Technical Bid. Bids not accompanied with EMD shall stand

rejected. No interest shall be paid on the EMD amount. In case of wrong

information/ bidder has hidden material fact, EMD will be forfeited. EMD

should be valid for a period of 180 (One Eighty) days from Proposal Due Date.

The Bid Security / EMD will be refunded to unsuccessful Applicant agencies

within 30 (Thirty) days of completion of selection process. Exemption from

submission of EMD: Parties as per MSME act, 2006 / NSIC registered parties.

The certificate shall be valid on the date of tender opening and must cover the

service to be rendered.

1.7.3 Prices: Prices shall be offered in Indian Rupees only for the supply,

installation, commissioning, training, documentation of the TV,CRS and studio

lighting part equipments with 12 months ( Twelve months) of

warranty/guarantee of equipment for all the equipment offered by the bidder as

per the tender BOM attached from the date of handing over the facility to

KTUJM.

1.7.3.1. The price quoted shall be firm and no price escalation will be

permitted in any case.

1.7.3.2. If no price is offered or left blank against any particular item, it will be treated as free of cost [FOC].


1.7.3.3. In case taxes are not quoted separately, the prices will be treated as inclusive of all taxes, duties etc as applicable. Bidder has to consider all the taxes and duties which are applicable.

1.7.3.4. In case it is mentioned that Taxes are extra as applicable, the bid is liable to rejected.

1.7.3.5. In case of changes in the taxes structure announced by state and

central Government, the variations in the taxes will be considered .

1.7.3.6. The actual Sales Tax Percentage (without Form “C”) if any, should be specified.

1.7.3.7. The price offered by the bidders will include warranty from the

respective OEMs for twelve months from the date of handing over the facility to KTUJM .

1.7.4 Consignee: Equipment shall be consigned to Registrar, Kushabhau Thakre

Patrakarita Avam Jansanchar Vishwavidyalaya, Raipur,

Chattissgarh.

1.7.5. Delivery and commissioning period: The time-line for the entire work viz

supply, installation, commissioning and training of the project will be 10

weeks from the date of award of the contract.

1.7.6. Warranty/guarantee: Bidders shall provide Twelve months of

warranty/guarantee for all the equipments/services offered by them inclusive of

installation items, hardware and application software. The warranty period will

start on the day of handing over of the facility to BECIL.

1.7.7. Liquidity damages: In case of delay in supply, installation, testing,

commissioning and training for Setting up of Television Studio and

Community Radio Station and studio lightings part equipments, successful

bidder shall be liable to pay a penalty @ 0.5% of the order value per week of

delay or a part thereof up to maximum value of 10% of order value after which

order is liable to be cancelled. In case of inefficiency/failure to execute the

project by the bidder due to the problems with the bidder the submitted PBG

will be forfeited.

1.7.8. Payment terms: No advance payment for the supply will be made. 80%

payment will be made after completing the supply of all the materials in all


respects at the site. 20% payment will be released after the successful

installation, testing, commissioning, training and satisfactory functioning of the

entire system.

1.7.9. Performance Bank Guarantee: Successful bidder shall have to furnish an

Performance Bank Guarantee (PBG) (as per format attached at section 3.7) in

favour of Chairman and Managing Director, Broadcast Engineering

Consultants India Ltd, BECIL Bhavan, 56-A/17, Block-C, Sector-62, Noida-

201301 for an amount equal to 10% of contract value and valid for sixteen (16

) months after the date of handing over of the work. PBG has to be submitted by

the successful bidder within 15 days from the date of issue of work order by

BECIL and valid till the warranty period. In case PBG is not submitted within

the stipulated time period, BECIL reserve the right to forfeit the EMD of the

bidder and bidder will be debarred from participation in the tender for next

three years.

1.7.10. In case bidder submit any wrong information or hidden any material

fact/information ,BECIL reserve the right to terminate the contract and forfeit

the PBG submitted by bidder. BECIL also reserve to right to get the balance

work done at the cost and risk of the bidder who has been awarded the work.

. 1.7.11. The bidder cannot sub contract the work to any other agencies. In case it has

be done in extreme condition, bidder has to give reason for the same and take

permission from BECIL

1.7.12. The Bidder- bidder shall have the registration with EPFO and ESIC. The

EPF and ESI contribution on the part of employer in respect of this

contract shall be paid by the bidder. All Challan in respect of EPF/ESI should

be submitted to BECIL. Bidder has to indemnify BECIL against any liability on

account of EPF/ESIC.

1.7.13. MATERIALS SUPPLIED BY THE Bidder: The bidder shall furnish / produce

purchase vouchers and manufacturers test certificates of all major

items/equipments from the reputed manufacturers /suppliers. In addition to

the testing of materials and QC passed in accordance with Technical

specifications

1.7.14. EXTENSION OF TIME: If the bidder shall desire an extension of time for the

completion of the work on the ground of his having being unavoidably hindered

in its execution in consequence of altered, additional or substituted work, or


any other ground, he shall apply in writing to the Engineer in charge within

seven days of the hindrance on account of which he desires such extension as

aforesaid and then Accepting Authority shall, if in his opinion (which shall be

final) reasonable grounds be shown therefore, authorize such extension of time,

if any, as may, in his opinion be necessary or proper.

1.7.15. In case of delay due to contractor mistakes/problems the Extension of Time

(EOT) will be given by invoking LD clause mentioned in the terms and

conditions of this RFP.

1.7.16. Product quality: Field proven industry tested equipment and solutions from

renowned and reputed firms from industry with proven track record only will be

accepted. Non-standard make/model of equipment without proven and credible

local support will disqualify the proposal technically.

1.7.17. Compliance to RFP specification. A compliance statement of the items quoted

with respect to the preferred make suggested or its equivalent offered by the

bidder in functionality, quantitative and qualitative performance are an

essential requirement for technical evaluation. Proposals without adequate

compliance statement will be rejected. The bidder will have to convince BECIL

that, the product offered is equivalent or better in performance and support

over the preferred make and model indicated in the RFP

1.7.18. Compatibility: System is envisaged to be compatible with the existing setup as

well as other quoted equipment in all respects. Up gradation/ Modular design

System/equipment be future looking and open to technology up gradations

besides capable of adding on facility and features in phased manner

1.7.19. Assurance of supply and support: With respect to their technical capability,

organizational stability, reliability of equipment, ability to meet timelines and

past experience of BECIL with Bidders

1.7.20. Services: Work man ship provided by the contractor should be skilled enough

to carry out the particular works for the better and efficient execution of works.

In case of deficiency in services, BECIL reserve the right to deduct payment in

the final settlement of payment.

1.7.21. Variation in quantities: If quantities of the items are exceeding the estimated

quantities due to site conditions the overall actually executed quantities will be

paid as per the quoted prices only. No additional cost will be paid on the unit

quoted rate.

1.7.22. Addition and deletion of any BOQ item: BECIL will have right to cancel any


item and also to add any new item.

1.7.23. Safety: Material and labour safety will be solely responsible of the bidder.

1.7.24. Quality: Equipment stability, guaranteed uptime parameters, life of equipment.

All the items which are going to be installed should be of approved make and

model with an ISI certification

1.7.1. After awarding of the contract the bidder has to provide all the technical details

and drawings of all the works and shop drawings for the acoustic works,

furnishings and all electrical related works.

1.7.2. Measurements: Measurements will be made jointly and payment will be made

as per the actual measurements only. For civil works the finished and visible

area will be measured .Whereas the electrical wiring items which ever will get

concealed should be measured before getting concealed.

1.7.3. It is responsibility of the bidder to maintain the site neat & clean. In case of any

damage to the property of KTUJM while execution of the work by the bidder, the

same will be recovered from the bidder while settlement of final payment.

. 1.7.4. BECIL will not accept the terms and conditions proposed/imposed by the bidder

in their offer.

1.8 Proposal response format:

All bidders are requested to submit technical and commercial bids on the

suggestive Bill of Material as indicated in the section 2 and 3 only. Pricing

information shall appear only in the commercial bid and the technical bid shall

contain all technical details, literature, makes and models of equipment offered

for each item, technical compliance statement with reference to the

specifications as included in the bid document highlighting any deviations. The

technical literature of the offered equipment in CD/DVD format must

accompany technical bids.

1.8.1. Technical bid proposed by the bidder is to be prepared on standard 8½” x 11”,

A4 size paper. Foldouts containing charts, spread sheets, and oversize exhibits

are permissible. The pages should be placed in a binder with tabs separating

the sections of the proposal with proper index in the first page for easy


identification and scrutiny of the offers. All responses, as well as any reference

materials presented must be written in English.

1.8.2. Figures and tables must be numbered and referenced in the text by that

number.

1.8.3. Proposals shall be based only on the items contained in this RFP and its

standard required accessories. The RFP includes official response to pre-bid

conference questions, addenda, and any other material published by BECIL

pursuant to the RFP. The bidder is to disregard any previous draft materials

and any oral representations it may have received. All responses to the

requirements in Sections (list appropriate section) of this RFP must clearly state

whether the proposal will satisfy the referenced requirements, and the manner

in which the requirement will be satisfied.

1.8.4. The Technical Bid (Part – I) for the RFP should contain following documents

1.8.4.1. Detailed solution for the entire project along with block schematic, signal

flow, timeline, action plan for smooth timely project execution etc as

proposed by the bidder.

1.8.4.2. Details of the formats in which the bidders are required to furnish the

documents are attached in section 3.0.

1.8.4.3. Authorization by the OEM of each of the equipment offered by the bidder

addressed to Chairman and Managing Director, BECIL, confirming the

support to the bidder, comprehensive warranty and guarantee of the

products offered for this RFP for twelve months after the installation

and handover of the facility to BECIL.

1.8.4.4. Particulars of the partners and OEMs or principals with whom bidders

have official/authorised partnership/distribution ship and documents

thereof.

1.8.4.5. Data sheets for the items quoted should invariable be attached with the

proposal. User manuals should not be attached. Proposals without data

sheets of the items quoted will not be evaluated technically and are

liable to be rejected.

1.8.4.6. An item wise compliance statement providing summary of the proposal

should also necessarily be submitted as part of the proposal. The

compliance statement will indicate whether the offer meets the

compliance fully or partially. In case if the compliance for a particular

item/equipment is not indicated, it will be assumed that, the offer does


not meet the compliance and BECIL is free to accept or reject the offer

on this basis.

1.8.4.7. Un priced bid format as per the format mentioned in 2.2 of this RFP

1.8.4.8. Details of the make/model is being quoted for the each item should be

mentioned in format indicated in the section 2.4 – shall be indicated

item wise.

1.8.4.9. A CD/DVD with all the technical information and eligibility criteria

information shall be submitted.

1.9 Method of evaluation and award: The proposals will be evaluated with reference

to the technical requirements as specified in the BOQ... The commercial bid will be

opened only those who qualifies in the technical bid evaluation.

1.9.1. Price: Rates offered should comprise of supply, installation, testing,

commissioning, training of all supplied equipments with all the services and

support within the warranty period should be quoted in Indian Rupees only.

1.9.2. Product quality: Field proven industry tested equipment and solutions from

renowned and reputed firms from industry with proven track record only will be

accepted. Non-standard make/model of equipment without proven and credible

local support will disqualify the proposal technically.

1.9.3. Compliance to RFP specification. A compliance statement of the items quoted

with respect to the preferred make suggested or its equivalent offered by the

bidder in functionality, quantitative and qualitative performance are an

essential requirement for technical evaluation. Proposals without adequate

compliance statement will be rejected. The bidder will have to convince BECIL

that, the product offered is equivalent or better in performance and support over

the preferred make and model indicated in the RFP.

1.9.4. Compatibility: System is envisaged to be compatible with the existing setup as

well as other quoted equipment in all respects. Up gradation/ Modular design

System/equipment be future looking and open to technology up gradations

besides capable of adding on facility and features in phased manner.


1.9.5. Assurance of supply and support: With respect to their technical capability,

organizational stability, reliability of equipment, ability to meet timelines and

past experience of BECIL with Bidders.

1.9.6. Service: After sales service, availability of spare parts/technical support,

within the warrantee offered. (Note: If the bidder fails to provide after sales

support within the warranty period the PBG will be forfeited.

1.9.7. Programming and commissioning experience: Expertise and experience of the

bidder in system integration of projects of similar nature and also their past

performance in executing BECIL’s/other projects.

1.9.8. Delivery Schedule: Adherence to the delivery time line proposed by BECIL will

be critical parameter for evaluation and final decision.

1.9.9. Tax Deduction at Source (TDS): TDS will be deducted as per prevailing rules

in force.

1.9.10. Training: The successful bidder has to provide subsequent training for a period

of 5 days to BECIL and KTUJM officials on the operational, troubleshooting

and maintenance aspects of all equipments installed - under this RFP to ensure

its efficient functioning. For this purpose, the bidder will suggest suitable

schedule and duration of training for each category of the staff viz technical and

content creators (program staff) and the training will be imparted as per

schedule to be given by KTUJM.


2.1 Technical Drawings

KTUJM TV studio layout


KTUJM Community Radio Studio



2.2 Un Priced Bid Format- Listing of Equipments

A. BOQ of the equipments for the TV studio.

SL DESCRIPTION Qty

1. Tripod with dolly suitable for above camcorder along with the suitable carry case.

3 No’s

2. Integrated Television production equipment for HD vision/audio mixing,

internet streaming with virtual studio 1 No’s

3. Teleprompter 1 No’s

4. Talk Back System 1 No’s

5. Audio console 1 No’s

6. 42” picture flat panel display panel for studio device LCD/LED 1 No’s

7. 48” Flat Panel Display Device (LCD/ LED) for PCR and Class room 2 No’s

8. Headphones 4 No’s

9. Lavaliere Microphones 4 No’s

10. Back-Electret Condenser Microphone, clip and grille/windscreen. 2 No’s

11. Microphones: General Recording 3 No’s

12. Audio Distribution Amplifier 1 No’s

13. Digital SD/HD-SDI video distribution amplifier 1 No’s

14. SD/HD Digital video recorder 1 No’s

15. Non – Linear Editing System 2 No’s

16. 8 port Gigabit Ethernet Switch 1 No’s

17. Speakers on studio floor and class room 2 Pair

18. DVD/CD Recorder/Player 1 No’s

19.

Supply, installation, testing and commissioning of 42U rack with

accessories like front glass door, rear door, castor, fans, 6/16A AC distribution sockets with provision of dual input power supply, hardware, key board tray, shelf, cable manager etc. complete as required.

2 Nos.

20.

Cables, connectors, DDA & ADA, patch panels, power cards, software,

DVD, user manuals and all other accessories to complete the HD studio

setup. All the necessary software required for proper working of the

system is to be supplied in original and should be licensed to KTUJM

with perpetual validity

1 Job


SL DESCRIPTION Qty

21. Installation, Testing, Commissioning and Training Charges 1 Job

B. Bill of quantity for community radio studio

SL Description Qty

1 Monitor, 50 W 1 No’s

2 8 Channel on-air Broadcast console 1+1 2 No’s

3 Dynamic cardioids/condenser Microphones. 6 No’s

4 Portable solid state field recorders 8 No’s

5 Headphones 8 No’s

6 Personal computers 4 No’s

7 2 channel sound card with differential input. 3 No’s

8 Audio Processor 1 No’s

9 Phone in Equipment up to 4 lines with provision conference facility/Phone in system

1 No’s

10

Procurement of all the required installation materials for integration of all studio equipment and functioning of the all the above equipments. Installation, Testing, Commissioning and Training Charges.

1 lot


C. Bill of quantity for studio lighting system

Sl Description Unit Qty

1

SITC of MS Lighting grid all over the studio: SITC of MS suspender consisting of fish plate of

150X150X6mm & stud with 12mm threaded rod keep the tubular grid rigidly undergone through 7Tank chemical treatment to keep them rust free and with requisite anchor fastener, duly powder coated in black matt texture finish.

SITC of MS dual barrel 40NB tube of 2mm

thickness undergone through 7Tank chemical treatment to keep them rust free duly powder coated in black matt texture finish to create square matrix grid with black type end cap.

Lot 1

2

SITC of Lighting Power control system: SITC of Well designed and engineered Wall mount

direct light distribution panel with necessary indicators, MCBs and proper ear thing undergone through 7Tank chemical treatment to keep them rust free duly powder coated in black matt texture finish with suitable nylon glands for outing power cables.

SITC of 4-way MS fabricated power lighting junction box made up of 22SWG CRCA sheet of Jindal make undergone through various chemical treatment to keep them rust free and duly powder coated with suitable FC7 nylon glands.

SITC of MS Fabricated duly powder coated DMX signal box and DMX loop box with DMX connecters, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 nylon glands.

SITC of installation Hardware’s for complete Grid system and cabling systems

Lot 1

3

SITC of Chroma arrangement for size of 4mtr x 3.3mtr including fabricated Tie down railing, Tolleys, I Track and leading edge frame, cloth to tie it drum tight. All the fabricated items undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish

Lot 1

Lights for News desk


4

SITC of 90W LED light panel complete with 2 diffusers, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp power - 90W • Power supply - 230/240V AC to DC 14V 7A • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 3200K • Dimming - 0-100% through manual and DMX • Beam Angle - 30° • Operating Temperature - -30°C to +55°C • Protection rating - IP20 • Dimension - 480 x 530 x 100mm • Weight - 4.5Kg

Nos 6

5

SITC of 200W LED Fresnel spot light, 3200K with with

25780 lux at 3mtr in spot, 2417 lux at 3mtr in flood

complete with 200mm dia imported German Lens,

normal operated yoke provided, undergone through 7

Tank chemical treatment to keep them rust free and,

duly powder coated in black matt texture finish and

technical specifications as below.

• Lamp power - 200W • Power supply - 230/240V AC •

Power cable - 3 core 1.5 sq. mm. copper PVC insulated

• Color Temperature: 3200K • CRI - >90 • Dimming - 0-

100% through manual and DMX • Beam Angle - 10°-

50° or 30° or 60° • Protection rating - IP20 • Dimension

- 395 x 370 x 450mm • Weight - 10Kg.

Nos 5

Lights for Chroma

6

SITC of 90W LED light panel complete with 2 diffusers, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below.• Lamp power - 90W • Power supply - 230/240V AC to DC 14V 7A • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 5600K • Dimming - 0-100% through manual and DMX • Beam Angle - 30° •

Operating Temperature - -30°C to +55°C • Protection rating - IP20 • Dimension - 480 x 530 x 100mm• Weight - 4.5Kg.

Nos 6


Signature of the bidder

7

SITC of 200W LED Fresnel spot light, 5600K with with 26600 lux at 3mtr in spot, 2470 lux at 3mtr in flood complete with 200mm dia imported German Lens, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. • Lamp power - 200W • Power supply - 230/240V AC • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 5600K • CRI - >90 • Dimming - 0-100% through manual and DMX • Beam Angle - 10°-50° or 30° or 60° • Protection rating - IP20 • Dimension -

Nos 2

8

SITC of Light accessories for above quoted lights :-

SITC of Die cast aluminium "C" clamp with safety locking chain, duly powder coated in black matt texture finis, Lock - MS threaded Galvanized lock key, Plastic Glass filled nylon moulded M6 key, Pre-treated and black epoxy polyester powder coated and Safe working load – 150Kg. SITC of 1.5mtr long safety bond with lock clip to be fixed around the grid and each lighting fixture to avoid fall of the fixture in case if the "C" clamp is not locked properly . SWL 100Kgs SITC of 4- leaf barn door, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish

Lot 1

9

SITC of Digital Dimming system consists of Controller for the LED lights.•SITC of 96-channel Digital DmX lighting controller to control all the LED lights.. •SITC Grid mount photo isolator DMX splitter unit 1 DMX input and 8 isolated output with Power Supply: 90-240V AC, 45-63Hz - Control: DMX 512 protocol - Control Signal input: 5 pin XLR female- Size: 482 x 44 x 128mm - Weight: 2Kg SITC of DMX signal cable 5 core for DMX network with 5 pin DMX connecter.

Lot 1

10

SITC of copper un armoured FRLS flexible cable power cables, Powder coated cable trays and consumables and green Chroma Cloth.

Lot 1


2.3 Brief technical specification

2.3.1 Main HD studio equipments setup

2.3.1.1. Integrated Television production system for HD vision/audio mixing,

internet streaming with virtual studio: This production equipment should

have facility to take four external video sources for production purpose for

generation of content from multiple video and audio sources. The output of the

individual camera shall be stored on internal 2 TB HDD. It should have the

capability to simultaneously record all 4 sources on the internal hard disk.

The quoted switcher should have integrated solution for LIVE production,

Recordings, Graphics, Titling, HD Virtual sets, audio console, built in

streaming and web publishing.

2.3.1.2. Audio console: 16 input digital audio console for final audio production from

different audio sources.

2.3.1.3. Studio talk back system: which is a communication channel between

producer at the control room and the presenter & camera men in the studio

floor. The studio end should be equipped with press-to-talk microphone and

also an earphone based communication device for communication with

producer at control room.

2.3.1.4. Microphones: Leveller and handheld microphones to be provided in the studio

for capturing audios of Presenters/Teachers and guests participating in the

group discussion.

2.3.1.5. Teleprompter: Prompter shall be used in any Indian language for helping the

anchor / presenter/ teacher for smooth delivery of the presentation

2.3.1.6. Post production system: NLE systems shall be used for post production

activity. The edited video programs shall be played back in real time for

broadcast/ streaming and the system shall also be capable of transferring the

content on DVDs


2.4 Brief technical details of each item A. Detailed technical specification for TV studio

SL Description Products

similar to or better

1

Tripod Two stage aluminium or carbon fibre tripod: Load capacity: 30Kg. Approx. Bowl : 100mm Minimum Height : 65cm or less Maximum Height : 150cm or more Studio Skid/ Dolly : Wheel diameter : 10/12.5cm Payload : 30kg or more Weight : 7 Kg Cable guard: Yes Break : Yes Tripod, pan and tilt head, dolly with all accessories offered should be cable to take load of camera and teleprompter which is put together 30 kg ( approx ) to operate in the studio setup. Suitable carry case should be provided.

Manfratto/shottoku/equivalent

2

Integrated Television production equipment for HD vision/audio mixing, internet streaming with virtual studio: Detailed functionalities: Video Inputs: 4 simultaneous live video sources, in any combination of HD-SDI, HD Component, SD-SDI, SD Component, Y/C (BNC) or Composite connections. Per-input format configuration scalar and frame synchronizer enabling intermixing of formats. Video output: HD-SDI, HD Component, SD-SDI, SD Component, Y/C (BNC) or Composite - HDMI, DVI and VGA output for displays or projector - Network output for live streaming Virtual sets: 30+ HD live virtual sets, with multiple camera angles, real-time reflections, specular highlights, animated zoom and presets Recording: Multi-track, multi-format recording of up to 4 simultaneous channels. Native recording in up to 1080p with time code Audio Mixing: Integrated multi-channel audio mixer for internal and external audio sources, outputs, stream and headphones Live Streaming: HD live streaming via Gigabit connection, with presets in up to 720p, supporting most common streaming profiles and custom multi-bit rate streaming profiles, configured via browser based plug-ins, Adobe® Flash® to Flash media server connections or Microsoft® Windows Media® Push/Pull, Streaming Profile Manager with integrated Web browser and integrated Livestream® plug-in Media Publishing: Supports direct content upload to social media networks. Playback Media Formats: AVI, DV, DVCPro, DVCProHD, FLV, F4V, H.263, H.264, MOV, MKV, MJPEG, MPEG (1, 2, all profiles, program

Newtek ( Tricaster)




or transport streams), MP4, WMV, WebM, PSD, PNG, TGA, BMP, JPEG, EXR, RAW, TIF, AIFF, MP3, WAV, and more, with Import Media application for batch import with optional transcoding of files (including Apple ProRes) Effects and Transitions: Integrated TransWarp effects engine on all effects channels supports standard transitions, customizable animation store transitions with audio, and overlay effects - Animation Store Creator for custom animations Monitoring: Selectable layouts for user interface and multi view preview displays Video Outputs : 2 X SDI 2 x Analog ( configurable for component or Y/c + composite) , HDMI output, 2 display ports for additional displays, Network output for live streaming. Audio Input: SDI (Embedded x 4), 3x2 Balanced ¼” MIC/LINE (XLR/ TRS combo: Balance x 2), 1x2 Balanced XLR ( MIC/LINE) Phantom power support Audio Output: SDI (Embedded x 2), 2 Balanced XLR All the essential accessories along with control surface, virtual set editor and two monitors for display

Bidder should provide hardware control surface with necessary interface cables.

3

Teleprompter: Display Device Specification Display Device Size: 19” LCD/LED Monitor TP hood with complete tripod mounting assembly Reading Range : Up to 10 meters Video Input: VGA/ PAL System Requirement Operating System: Windows XP(32 bit or 64 bit) Windows 7(32 bit or 64 bit) Min 2.6Ghz CPU ; 2 GB RAM; 1 Free PCI Express Slot(For Desktop) Software : Breaking News ,Type N Play ,Import RTF/Doc/Html/Txt ,Import Run Downs , Reader Management, Anchor Messages ,Multi Camera Support ,Background Color Selection ,Date & Time Display ,Bookmarks , Timer ,Auto Detect and import files ,Run Time Script Editing ,Run-Time Run order Updation ,Block Story ,Clip Reference

,Multilingual Support , CDAC software for multi language support. import .rtf and .doc files into the run orders. USB Hand Control unit Required cable and media driver should be available to complete the system.

Auto script, Samvad, Datavideo or equally reputed

4

Talk Back system: 2-channel master station and system power supply in a single unit. Voice activated microphone, public address output, back-lit keys, incoming call indications, stereo output for monitor speakers, microphone kill key, and instantaneous auto-reset. Goose neck microphone Power requirements : AC Input: 100-240 VAC, 50/60 Hz Channel Power: 24 VDC nominal (12 to 30 VDC), 65 to 150 mA Dynamic-microphone Headset

Bosch, Telex, Clearcom ,sonifex, equally reputed




Microphone: 50 to 200 Ω, dynamic (balanced or unbalanced) Headphones: 150 to 600 Ω, monaural Panel Microphone Input Microphone Type: Electret condenser Power: Phantom (+5 VDC) PA Output Output Level: 235 m Vrms nominal Connector Type: ⅛-inch Stereo Phone Jack Speaker Output Output Level: 0 dB nominal (1.0 Vrms) Output Impedance: 1000 Ω nominal Frequency Response: 200 Hz to 8 kHz +1/-3dB Connector Type: RCA Phono Jack Headphone Amplifier Voltage Gain: 30 ±3 dB Maximum Output: 250 mW ±10% into 150 Ω, 65 mW ±10% into 600 Ω Frequency Response: 200 Hz to 8 kHz +1/-3db Belt packs: 4 sets Talk Button and Indicator The Talk button activates the headset and can operate in either Hands-Free-Talk or Push-to-Talk Mode. Headset 50 to 200 ohm dynamic microphone 150 to 600 ohm headphones Along with the Base station bidder should supply 1 x : 12” Gooseneck Microphone. 4 x : Dual-Sided Headset with flexible Dynamic Boom microphone. 4 x : Compatible Belt Pack.

5

Audio Console: 16 channel , true 7-bus architecture , 2 stereo inputs, 2 stereo returns, talkback facility, +48 phantom power, 12- segment LED metering, 100mm fader, 6 aux sends,4 of which are pre/post switchable, group and mix inserts, channel direct outputs.

Sound craft, Yamaha, Mackie ,Behringer

6

42” picture flat panel display panel for studio device LCD/LED Visible screen size (diagonal):

42”

Panel: LCD/ LED HDTV display capability: 1080i (Full HD), 576i Display resolution: 1,920 (W) x 1,080 (H) Video inputs: USB, composite, component video input, HDMI, PC input,

at least one compatible with vision mixer prog., output Power supply: Mounting

To operate at 230 V ±10%, 50 Hz AC. With moving pedestal stand

Sony, JVC,

Panasonic or

equally reputed

7

48” Flat Panel Display Device (LCD/ LED) Visible screen size (diagonal):

48 inches”

Panel: LCD/LED HDTV display 1080i (Full HD), 576i

Sony, JVC,

Panasonic or

equally reputed




capability: Display resolution: 1,920 (W) x 1,080 (H) Video inputs: USB, composite, component video input,

HDMI at least one compatible with vision mixer

Power supply:

Mounting

To operate at 230 V ±10%, 50 Hz AC.

Wall mount

8

Headphones: Type Closed-Back, Dynamic Frequency Range 20Hz - 20kHz Impedance 55 Ohms Sensitivity 91dB Maximum Input Power 200mW Connectors Gold-Plated 3.5mm Stereo Mini Plug with 1/4" Adapter

AKG, Beyerdynamic ,Audio technical, equally reputed

9

Lavaliere Microphones Back-Electret Condenser Microphone, clip and grille/windscreen. Power supply: 12 - 48 V phantom powered Pick-up pattern: 2 nos. Omni-directional Frequency response 40 - 20,000 Hz ± 3 dB Nominal impedance 200 Ω Connector 3-pin XLR with integral phantom power adaptor Cable length : 3 m Sensitivity : (free field, no load) (1 kHz) 10 mV/Pa ± 2.5 dB

Audio technica, AKG, Sennheiser

10

Back-Electret Condenser Microphone, clip and grille/windscreen. Power supply: 12 - 48 V phantom powered Pick-up pattern : 2 Cardioid Frequency response 100 - 20,000 Hz ± 3 dB Nominal impedance 200 Ω Connector 3-pin XLR with integral phantom power adaptor Cable length : 3 m Sensitivity : (free field, no load) (1 kHz) 10 mV/Pa ± 2.5 dB

Audio Technica , Shure ,AKG

11

Microphones:

Transducer (Moving Coil) Dynamic Polar Pattern Cardioid Frequency Response 40 Hz - 15 kHz Output Impedance 600 Ohms Output Connectors XLR-3M Type

Audio technica , Shure ,AKG

12 Audio Distribution Amplifier • Balance Audio (XLR) for both IN and OUT • Minimum 1 IN 4 OUT

Comcon/Shure or similar

13 Digital SD/HD-SDI video distribution • Reclockable SDl inputs • SD/HD through SDl

Blackmagic, Evertz , equally reputed




• Minimum 1 IN and 4 OUT

14

Hard disk based HD Recorder

HD/SD SDI input, output and loop through with embedded audio.

HD/SD SDI and HDMI output

Minimum 500 GBHDD with enclosure

USB & SATA interface

Compatible Audio/Video interface with Camera as well as audio and

vision mixer.

XLR Balance Audio input and output

Table top Mounting

Recording format (SD,HD)

Additional two number 500GB HDD. Total 3 numbers 500 GB HDD.

Datavideo / Blackmagic Design , equally reputed

15

Non – Linear Editing System Must be a 64 bit application to harness the full power of the Host system. Open timeline capable of editing mixed formats, Codecs, frame rates and also mix SD and HD Resolutions in Real Time. A real-time HD to SD timeline conversion Capable of natively working on different file based formats such as XDCAM, P2 or DSLR media. Should support 3rd party IO options. Should also support option of Playing Out clip from PCR even as it is being published. Application must have excellent built in search options to locate the Clips. Should support User customizable Layouts. Twin window display of Source and Edited sequence. Compatibility with 3rd party effect Plug-in from Boris, Sapphire, Red Giant etc. Industry standard Audio plug-in and Audio EQ tools to be part of editing application. Audio mixing to be possible from the Timeline itself. Advanced titling options to be part of the Editing Application. Application must support high end Real-time post Chroma options for Studio Based shoots. Three years subscription. Workstation: Single Intel Xeon E5-1650 3.20Ghz 12MB 1600 6C CPU / 4 TB Hard Drive/ 16GB DDR3-1600 ECC RAM/ 16X Super Multi DVDRW / Windows 7 Pro 64 Bit / NVIDIA Quadro K2000 / 24” full HD LCD/LED dual Monitor I/O card: PCIe capture and playback in SDI/HD-SDI, HDMI and analog

Adobe Premiere, Apple (FCP), Avid (Media composer)

16

Speakers on studio floor : Active speaker (2 way) with wall-mount bracket * (modified) Type Active Low/mid driver dimensions:

6" or more

Tweeter dimensions (mm)

25 mm to 50 mm

Genelec, Bose, JBL, EV ,Behringer




RMS: (Both LF + HF) ≥ 80 watt Frequency response ≤85 Hz - ≥ 15000 Hz Max. SPL ≥ 100 dB Protection circuits: Overload Controls: Treble, volume, mic gain, bass, mains switch

(on/off) Line inputs: Minimum 1 Line inputs connectors: XLR & 6.3 mm Jack Mic inputs: 6.3 mm Jack & XLR, minimum 1 Line outputs: Minimum 1 Line outputs connectors: 6.3 mm Jack & XLR Operating voltage: 230 V A C ± 10% , 50 Hz Cabinet material: ABS/ Polypropylene / MDF

17 8 port Gigabit Ethernet Switch D-Link,TP-Link,Netgear

18 DVD /CD Player Sony/Philips/Panasonic

19

Supply, installation, testing and commissioning of 42U rack with accessories like front glass door, rear door, castor, fans, 6/16A AC distribution sockets with provision of dual input power supply, hardware, key board tray, shelf, cable manager etc. complete as required.

President, Bestnet

,equivalent

B. Detailed technical specification for the Community Radio studio equipments.

SL Description Products similar

to or better

1

Monitor 50 W :

Near field distance-1 to 1.5 Meter distance ,

Bi-amplified and matched active crossover network,

Connectors : Balanced XLR connectors,

Volume control facility, Frequency level control,

Protection for open circuit, short circuit current and thermal

overload,

Power supply : 230 v± 5% ac 50±2 Hz, single phase power supply

Frequency Response: within ± 3 db between 50 Hz & 18 Khz with

respect to 1 kHz. Amplified power : 50 W

Input impedance : 10 k ohms (balanced)nominal input level: 0 dbu

input level range : -10 Dbu to +10 Dbu Maximum spl continuous

: > 104 db

Rokit :KRK RP5G3

Similar Product: M

Audio BX5A

eluxeD2,PreSonus

Iris

E5,YahamaHS5,B

ehringer


2

8 Channel Analog Mixer :

Frequency Response: Eight Mic. /Line Input to any output, 20Hz -

20 kHz, <1 db.

THD+N: Mic. Sens. -30dbu, +10dbu at all outputs @ 1 kHz,

<0.006%.

Noise: (a). Measured RMS, 20Hz to 20 KHz Bandwidth, Mic. E.I.N.

@ unity gain,150 Ohm , (b)source impedance -128 dbu unity

gain,150 Ohm source impedance -128 dbu, ( c).Mix Output, 8

inputs routed to mix <-86 dbu (d).Group & Centre Outputs <-86

dbu (e) Aux Outputs <-86 dbu.

Input & Output Max Levels: (a). Mono & Stereo Mic. Inputs + 15

dbu (b). Mono & Stereo Line Inputs + 30 dbu, (c). Stereo Returns

& Insert Returns + 20 dbu (d). Any output + 20 Dbu (e).Nominal

Operating Level 0dbu (f). Headphone Power, 2 x 250mw into 200

ohms.

CROSTALK (@1 Khz, TYPICAL) : (a).Input Channel Mute <-97

db(b).Input Fader cut-off <-95db(c).Pan isolation <-77 db(d).

Adjacent channel crosstalk <-99 db (e). Group to Mix <-89 db.

METERING : Input channels, Single Leds, Signal Present & Peak

outputs ,

OUTPUT: 1+1 stereo, additional output for head phone and line

POWER: AC mains supply (internal PSU), 90V-240V AC, 50 Hz

universal, Power consumption, Less than 100W monitoring.

Operating Conditions: Temperature range, -10ºc to +30ºc, Relative

Humidity, 0% to 80%.

order shelving LF, 80 Hz, +/-15 db, 2nd order shelving

Sound craft Behringer, Yamaha ,Mackie

3

Dynamic Cardiod/Condenser Microphones Pattern: Cardioid/super Cardoid pattern Response: on/ off axis and proximity response Frequency range: 50 hz to 15 khz Frequency response: the microphone shall have ± 3 db frequency response over a range of 150 hz to 1.2 Maximum peak with reference to 1khz: maximum +10 db Polar pattern: Cardioid/super cardioids. Front to back ratio: at least 10 db from 250 Hz to 4 kHz. Sensitivity: less than or equal to 600 ohms for connecting to audio input

Output impedance: less than or equal to 600 ohms for connecting

to audio input of load impedance greater or equal to 2000 ohm.

Connectors: 3 Pin XLR

Environment:5° c to 40°c and humid conditions of 85% rh at 40°

c.

Shure SM58

Similar Product

:E835 S

Dyne,AKGD-5


4

Portable Field Recorder :Recording/Play Mode :

Recording media : 2 Gb (or higher) semi-conductor memory Recording format : PCM linear digital format (.wav file format) Power: (a) Internal battery AA or AAA for at least 90 minutes continue recording, (b) internal chargeable batter y along with charger Input: (a) with a built-in /externally attached stereo microphone, (b) provision for connecting external microphone(c) provision for line input Output: Connectivity through usb 2.0 to audio workstation for data transfer Monitoring: Provision for headphone monitoring Measurements: frequency response at nominal input and output levels w.r.t. 1 kHz and from 50 hz to 15 khz: within ± 3db b).thd +

noise at -60 dbu input level and 0 dbu output level (50 hz.to 15 khz.) Weight: Total weight of recorder including batteries should be less than 500 grams (excluding carrying case of equipment) Dimension: The recorder should have compact body and its overall dimensions should be such that it can easily be held in palm or pocket by the recording personnel. Climatic conditions: The unit should be designed to work satisfactorily and meet all the specifications in climatic conditions as existing in India.

Tascam DR-05

Similar Product

:Sony

ICDUX560,Zoom

H1,ZoomH2

5

Headphones :Electrical Specifications :

Frequency range : 20- 22000 hz Electrical impedance: less than 75 ohms/channel Sensitivity at 1khz: 100 db spl at 1mw input Max power handling Capacity: 100 mw total harmonic distortion: 0.5% at max. Permissible input level. Headphone diaphragm material : hard polyvinyl chloride or similar ear-pads material: leatherette and velvet Average pressure on ears: max 4/6 n Cord length (may be detachable): at least 5 meter Phone plug: gold plated stereo mini jack (3.5 mm) with gold plated screw-on adaptor (3.5 mm to 6.35 mm) Head-strap: Adjustable .Max power handling capacity: 100 mw total harmonic distortion: 0.5% at max. permissible input level

Sennheiser HD202

Similar Product:

Behringer

HPS3000, AKG

K44V2,AKG K77

Pro.

6

Personal Computers :

Processor : Intel Core i3 Processor, 2.93 GHz, 2 MB Cache, 800

MHz,

RAM : 2 GB DDR2-RAM,

HDD: 500 GB SATA Hard Disk Drive, Double layer DVD Drive,

Peripheral Devices: Minimum 18.5” TFT screen, Multimedia

Keyboard, USB 2-button Optical Mouse, 2 Nos. Speakers

I/O Ports: 6 USB 2.0 port(2 front, 4 Rear), 10/100 LAN, PCI

slots,

Operating System: Genuine & licensed operating system (to be

HP280G1/Dell.


specified by applicant).

7

2 channel sound card with differential input sound Card :

Sample rates (kHz): 44.1/ 48/88.2/ 96/ 176.4/192

Maximum input: : +14.0dBu (+4 dBu setting), +6 dBV (Consumer

Setting), 0dBV (-10 DBV setting)

Dynamic range: 99 dB @ (A-weighted)

THD + N: Less than 0.0024%, (at 0 dBFS)

Frequency response: 20Hz to 20kHz ± 0.3dB

Impedance: 10k Ohms minimum

Maximum output: : +14.0dBu (+4 dBu setting), +6 dBV (Consumer

Setting), 0dBV

Dynamic range: 103dB (A-weighted)

THD + N: Less than 0.0015%, (at 0 dBFS)

Frequency response: 20Hz to 20kHz, ± 0.3dB

Impedance (unbalanced): 150 Ohms

M Audio M track

USB-2,Pre Sonus

Audio Box i2

8

Broadcast Audio Processor : The Broadcast Audio Processor shall be designed for continuous, unattended and trouble free operation in the broadcast chain of a VHF FM transmitter at a CRS. The processor shall have Digital Signal Processing technique. Analog Audio Input :Configuration: Left and Right/ Stereo Nominal Input Level:: Software adjustable from-4.0 to +12.0dBu A/D Conversion: Minimum 24 Bit Connectors: Balanced XLR Female, EMI Suppressed. Analog audio input: Configuration: Left and Right/ Stereo. Flat or pre-emphasized (at 50µs or 75 µs) software selectable. Output Level (100% peak modulation): Adjustable from -6.0 to +20 dBu software adjustable. Signal to Noise: 80 Db un weighted (20Hz to 15 kHz ) Distortion (20Hz to 15 kHz): = 0.02% THD. Cross Talk: cross talk -70.0 dB (20 z to 15 kHz) D/A Conversion: Minimum 24 Bit Connectors: Balanced XLR Male, EMI Suppressed. Voltage: 230 Volts AC ± 5%, 50Hz ±2% Connector: IEC, EMI Suppressed, detachable 3-wire power chord. Operating Temperature: 0 to 50 Relative Humidity: Up to 95% Non Condensing Working Altitude: Up to 3000 Mts. Above mean sea level.

ATC Lab Q10-

1101 or

Equivalent


9

Phone In-Unit : Dimension: 19” Rack mountable base unit Telephone Lines : 2 or more PSTN or GSM interface PSTN Line Interface: Standard Analogue: Balanced on XLR connectors. Level : 0 dBu (Nominal) & 10 dBu maximum Impedance : ≥ 5 k Ohm Analogue : Balanced on XLR connectors Level : 0 dBu (Nominal) & 10 dBu maximum Impedance : ≤ 200 ohms Digital Signal Processing : With in-build DSP (20 bit or better) Frequency response: 250 Hz – 3500 Hz, ± 1 dB THD + N : <0.2% Signal to Noise Ratio : > 55 dB Power Supply : 230 V± 5% AC 50±2 Hz , Single Phase supply

JK Audio Inkeeper 2 / Product: PHONEX D2 MKII/Sonifex/equivalent

C. Detailed technical specification for studio Lighting.

Sl No.

Description & Parameters Makes/model

1

90W LED light panel, 3200 degree K complete with 2 diffusers with 3Mtr cable but without any accessories. Available with spot 30 Degree or flood 60 Degree option.

Customized

* 900 LEDs high brightness with CRI above 90

* TLCI of the LED Fixture above 90

* Colour Temperature of 3200K CCT

* Touch pad based dimming system

* High frequency flicker free Light

* Powder coated Body with 7 tank process chemical treatment

* 0 to 100% dimming manual & DMX dimming

* Fuse protection for circuitry

* CE certified

2

90W LED light panel, 5600 degree K complete with 2 diffusers with 3Mtr cable but without any accessories. Available with spot 30 Degree or flood 60 Degree option.

Canara

Lighting /

Equivalent

* 900 LEDs high brightness with CRI above 90

* TLCI of the LED Fixture above 90

* Colour Temperature of 5600K CCT


* High frequency flicker free Light

* Powder coated Body with 7 tank process chemical treatment

* 0 to 100% dimming manual & DMX dimming


* Fuse protection for circuitry

* CE certified

3

200W LED Fresnel spot light, 3200K complete with 200mm dia imported German lens with 3Mtr cable

Canara

Lighting / Kino

flo / Lite panel

* 200W LED High brightness with CRI above 95

* TLCI of the LED above 90


* High frequency flicker free ballast

* Aluminium die cast and extrusion sheet housing with 7 tank Rusto cleaning, black powder coat mat finish paint

* 0 to 100% dimming manual & DMX

* Fuse protection in light fixture

* Protection rating - IP20

* CE certified

4

200W LED Fresnel spot light, 5600K complete with 200mm dia imported German lens with 3Mtr cable

Canara

Lighting / Arri

/ Desiti

* 200W LED High brightness with CRI above 90.

* TLCI of the LED above 90.

* Touch pad based dimming system.

* High frequency flicker free ballast.

* Aluminium die cast and extrusion sheet housing with 7 tank Rusto cleaning, black powder coat mat finish paint.

* 0 to 100% dimming manual & DMX.

* Fuse protection in light fixture.

* Protection rating - IP20.

* CE certified Light

5

MS suspender consisting of fish plate of 150X150X6mm undergone through 7Tank chemical treatment to keep them rust free and with requisite anchor fastener, duly powder coated in black matt texture finish & stud with 12mm threaded rod to keep the tubular grid rigidly held With SWL of 200kg.

Canara Lighting / Kino flo / Lite panel

6

SITC of MS lighting junction box made up of 22SWG CRCA sheet of

Jindal make undergone through various chemical treatment to keep them rust free and duly powder coated with suitable glands.

Canara

Lighting /

Arri / Desiti

7

Well designed and engineered Wall mount 20-way Direct light distribution board

Custom as

per the

standards of

practices

* Indication Light.

* Brass / Nylon gland

* 3-phase Suitable MCBs.

* Die cast and extrusion sheet housing with 7 tank Rusto cleaning, black powder coat mat finish paint


8

Digital Lighting Console with 96dimmer channels with 24 faders, 24 faders x 4 pages Power Supply: 90-240V AC, 45-63 Hz Digital Control Signal input/Output: DMX 512/1990 Digital Control Channel: 512 Channel by Patch able to control CH97-CH512. Audio Input: internal microphone MAX 120dB, output max. value: AC100mV Gooseneck connector stand: XLR 3pin, DC+12V 250mA, Memory Card:64K*2

Liteputer / Zero88 / ADB

2.5 Details of the envisaged services.

Supplying, Installation, Testing, commissioning, training, project documentation

warranty and support for one year of the entire project on turnkey basis.


3.0 Formats for the submitting documents by bidders.

3.1 Format for providing general information of the bidder.

SL Particulars Details of the bidder

1. Name and Address of the bidder:

2. Name and Designation of the concerned officer or authorised person to whom all references shall be made:

3. Fax Nos.:

4. Phone Nos./ Mobile Nos.:

5. e-Mail ID:

6. Chief of the organization and his/her contact details viz E-mail ID and Telephone:

7. Total No. of employees/ Manpower Strength:

8. Type of the Organization (Public Sector/ Limited/Private limited/ Partnership/ Proprietary/Society/Any other):

9. No. of the offices/Centres (enclose the list):

10. Bidder’s Proposal No. and Date:

11. Particulars of past experience of similar works furnished:

12. Name and address of local representative, if any:

13. Any other information that bidder may like to give in order to highlight his bid.

Place: Signature of bidder:

Date: Name in Full:

Designation/Status:


3.2 Format for providing details of works/services of similar nature carried out by the bidder during the last 5

years.

Name of the Bidder:

SL Name of the Customer

Description of work

Value of work

From To The work is done directly or through sub

successful bidder Remarks

Note: Photocopy of Performance Certificate/Completion Certificate of customer in Support of the work mentioned above is

required to be enclosed.


3.3 Format for providing details of the on-going projects.

Name of the Bidder:

SL

Full postal address of client and name of

Officer-in-charge with

Contact details

Descript ion of the work done

Value of contract

Date of commencement

of work

Scheduled / revised

completion period

Percentage of completion as on date

Expected date of

completion Remarks


3.4 Format for providing details on annual turnover from similar work

statement:

Name of the Bidder:

The bidder shall indicate herein his annual turnover from similar work during preceding 3

years based on the audited balance sheet/profit and loss account statement.

Financial year Annual turnover (Rs.)

2015-16

2014-15

2013-14

Note: 1. Copies of audited balance sheets with profit and loss account of 3 years shall be

submitted along with the Technical bid in support of above entries.

(Statutory Auditor)


3.5 Format of OEM’s authorization letter

TO BE PRINTED ON OEM’s OFFICIAL STATIONERY

Date:

MANUFACTURER’S AUTHORIZATION LETTER

To,

Chairman and Managing Director,

Broadcast Engineering Consultants India Ltd,

BECIL Bhavan, 56-A/17, Block-C, Sector-62,

Noida-201301

Subject: BECIL RFP Number:

Dear Sir,

We, (Name and Address of the OEM) who are reputed manufacturer of

………………….. Hereby authorize [bidder’s company’s name and address] to bid,

negotiate and conclude the contract with BECIL on behalf of us against subject RFP floated

on your behalf for establishment of Television Studio ,Community radio station and studio

lightings by Broadcast Engineering Consultants India Ltd at Kushabhau Thakre

Patrakarita Avam Jansanchar Vishwavidyalaya, Raipur for the equipment/items

manufactured by us.

We hereby extend twelve months of guarantee and warranty service for the goods

offered for supply against this invitation for bid by the above after the commissioning of the

project.

We also undertake to availability of hardware and software support and spares for a

period of twelvemonths from the date of installation and handing over of the equipment

for this project.

Yours faithfully,

(Signature with seal)

Name and Designation


3.6 Format for submission of EMD

Whereas ________________________________________________________ (hereinafter called the tenderer”) has submitted their offer dated ___________________________________________ for the supply of _______________________________________________________(hereinafter called the tender”)against the purchaser’s tender enquiry No._________________________________ KNOW ALL MEN by these presents that WE ____________________________of ________________________________________ having our registered office at___________________are bound unto _____________________(hereinafter called the “Purchaser”) In the sum of ---------------------------------------------------------------------------------------- for which payment will and truly to be made to the said Purchaser, the Bank binds itself, its successors and assigns by these presents. Sealed with the Common Seal of the said Bank this ______________day of ____________20__________.

THE CONDITIONS OF THIS OBLIGATION ARE:

(1) If the tenderer withdraws or amends, impairs or derogates from the Tender in any respect within the period of validity of this tender.

(2) If the tenderer having been notified of the acceptance of his tender by the Purchaser during the period of its validity:-

(3) If the tenderer fails to furnish the Performance Security for the due Performance of the

contract.

(4) Fails or refuses to accept/execute the contract. WE undertake to pay the Purchaser up to the above amount upon receipt of its first written demand, without the Purchaser having to substantiate its demand, provided that in its demand the Purchaser will note that the amount claimed by it is due to it owing to the occurrence of one or both the two conditions, specifying the occurred condition or conditions. This guarantee will remain in force up to and including 45 days after the period of tender validity and any demand in respect thereof should reach the Bank not later than the above date. (Signature of the authorized officer of the Bank)

Name and designation of the officer Seal, name and address of the Bank and address of the Branch


3.7 Format for submission of Performance Bank guarantee (PBG )

To

…………………………..

WHEREAS ………………………………. (Name and address of the supplier) (Hereinafter

called “the supplier”) has undertaken, in pursuance of contract no. ……. dated

………….to supply (description of goods and services) (herein after called “the contract”)

AND WHEREAS it has been stipulated by you in the said contract that the supplier

shall furnish you with a bank guarantee by a scheduled commercial bank recognized

by you for the sum specified therein as security for compliance with its obligations in

accordance with the contract;

AND WHEREAS we have agreed to give the supplier such a bank guarantee; NOW

THEREFORE we hereby affirm that we are guarantors and responsible to you, on

behalf of the supplier, up to a total of …………………………………. (amount of the

guarantee in words and figures), and we undertake to pay you, upon your first written

demand declaring the supplier to be in default under the contract and without cavil or

argument, any sum or sums within the limits of (amount of guarantee) as aforesaid,

without your needing to prove or to show grounds or reasons for your demand or the

sum specified therein.

We hereby waive the necessity of your demanding the said debt from the supplier

before presenting us with the demand. We further agree that no change or addition to

or other modification of the terms of the contract to be performed there under or of any

of the contract documents which may be made between you and the supplier shall in

any way release us from any liability under this guarantee and we hereby waive notice

of any such change, addition or modification.

This guarantee shall be valid until the ….. Day of ………, 2017……………………………….

(Signature of the authorized officer of the Bank)

………………………………………………………….

Name and designation of the officer

………………………………………………………….

Seal, name and address of the Bank and address of the Branch.


3.8 Format for submission of affidavit certifying that, the bidder is not barred

or blacklisted by any of the Central/State Government departments/

organizations/ central PSUs at the time of submission of bid or during

previous five years.

Declaration by the bidder

[Affidavit on Non-Judicial Stamp Paper of INR 100 duly attested by Notary/ Magistrate] This is to certify that I/We______________________ (authorised signatory – it should be Director or any person specifically authorised. In case of specific authorisation , the authority letter is required) ) of , M/s. ______________________ , in submission of this offer

confirm that: I/We hereby undertakes that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements; I/We hereby undertakes that I/we do not have records of poor performance such as abandoning the work, not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc. I/We hereby undertakes that Neither M/s ________________ nor Business has not been barred or blacklisted by any Central/ State Government Department/ Public Sector Undertaking or Enterprise of Central/ State Government at the time of submission of bid or during previous five years. I/We have submitted all the supporting documents and furnished the relevant details as per prescribed format. The information and documents submitted with the tender by us are correct and we are fully responsible for the correctness of the information and documents submitted by us. I/We hereby declare that all the information and statements made in this tender are true and accept that any misinterpretation contained in it may lead to our disqualification. I/We hereby authorise BECIL, in case any false undertaking/facts/document are found in our bid, to cancel our bid and take further action as per rule. ____________________ Signature of the Authorized Person Name:

Designation:


3.9 Format of authorization letter for signing the bid document on behalf of bidder.

To,

Chairman and Managing Director,

Broadcast Engineering Consultants India Ltd,

BECIL Bhavan, 56-A/17, Block-C, Sector-62,

Noida-201301

Subject: BECIL RFP for SITC of TV & CRS Studios and studio lightings at

KTUJM, Raipur ,

Dear Sir,

We, [bidder’s company’s name and address] herby authorize Sri/Smt

...................................to sign, bid, negotiate and conclude the contract with BECIL on

behalf of us against subject RFP floated on your behalf for establishment of Television

Studio, Community radio station, studio lightings by Broadcast Engineering Consultants

India Ltd at Kushabhau Thakre Patrakarita Avam Jansanchar Vishwavidyalaya, Raipur

for the equipment/items supplied by us.

Yours faithfully,

______________________________

Signature of Mr. ______________

(Signature with seal)

Name and Designation of the bidder ________________________________

Attested


3.10 FORMAT OF COMPLIANCE/EXCEPTION / DEVIATION

This organisation expects the bidders to fully accept the terms and conditions of the tender document. However, should the bidder still envisage some exception/ deviations to the terms and conditions of the tender documents, the same should be indicated here and put in un-priced bid i.e. “Technical Bids”. The price effect for withdrawal of such exception(s) to be indicated in the price bids only. If this proforma is left blank, then it would be presumed that bidder has not taken any exception / deviations to the terms and conditions of the tender documents.

Clause/ detailed specification of each of the equipment and services as mentioned in the section 2.4 of the RFP document

Full compliance

or not

Exception/ deviation taken by Bidder

Remarks

Signature of the Bidder/Tenderer

Seal of the Company -


3.11 Format of the financial Bid

A. BOQ for TV studio equipments.

SL DESCRIPTION Qty Unit price

Total amount

including taxes

Amount in

Words

1 Tripod with dolly suitable for above camcorder with suitable carry case.

3

2

Integrated Television production equipment for HD

vision/audio mixing, internet streaming with virtual

studio

1

3 Teleprompter 1

4 Talk Back System 1

5 Audio console 1

6 42” picture flat panel display panel for studio device

LCD/LED 1

7 48” Flat Panel Display Device (LCD/ LED) for PCR

and Class room 2

8 Headphones 4

9 Lavaliere Microphones 4

10 Back-Electret Condenser Microphone, clip and

grille/windscreen. 2

11 Microphones: General Recording 3

12 Audio Distribution Amplifier 1

13 Digital SD/HD-SDI video distribution amplifier 1


SL DESCRIPTION Qty Unit price

Total amount

including taxes

Amount in

Words

14 SD/HD Digital video recorder 1

15 Non – Linear Editing System 2

16 8 port Gigabit Ethernet Switch 1

17 Speakers on studio floor and class room 2 Pair

18 DVD/CD Recorder/Player 1

19

Supply, installation, testing and commissioning of 42U rack with accessories like front glass door, rear door, castor, fans, 6/16A AC distribution sockets with provision of dual input power supply, hardware, key board tray, shelf, cable manager etc. complete as required.

2 Nos.

20

Cables, connectors, DDA & ADA, patch panels,

power cards, software, DVD, user manuals and all

other accessories to complete the HD studio setup.

All the necessary software required for proper

working of the system is to be supplied in original

and should be licensed to KTUJM with perpetual

validity.

Any missing equipments to meet the complete

functionality of the TV setup should be considered

as per the design.

1 Job

21 Installation, Testing, Commissioning and Training Charges

1 Job

Total amount inclusive of all taxes in INR- say ‘A’

Amount in Words:


B. BOQ for community radio studio equipments:

Amount in Words:

SL Description Qty Unit price

Total

amount

including

taxes

Amount in

Words

1 Monitor, 50 W 1

2 8 Channel on-air Broadcast console 1+1 2

3 Dynamic cardioids/condenser Microphones. 6

4 Portable solid state field recorders 8

5 Headphones 8

6 Personal computers 4

7 2 channel sound card with differential input. 3

8 Audio Processor 1

9 Phone in Equipment up to 4 lines with provision conference facility/Phone in system

1

10

Procurement of all the required installation materials for integration of all studio equipment and functioning of the all the above equipments. Installation, Testing, Commissioning and Training Charges

1

Total amount inclusive of all taxes in INR- say ‘B’


C. BOQ for providing studio lighting works.

Sl Description Unit Qty Unit Rate Amount

including all taxes

Amount in words

1

SITC of MS Lighting grid all over the studio: SITC of MS suspender consisting of fish plate of

150X150X6mm & stud with 12mm threaded rod keep the tubular grid rigidly undergone through 7Tank chemical treatment to keep them rust free and with requisite anchor fastener, duly powder coated in black matt texture finish.

SITC of MS dual barrel 40NB tube of 2mm thickness undergone through 7Tank chemical treatment to keep them rust free duly powder coated in black matt texture finish to create square matrix grid with black type end cap.

Lot 1


2

SITC of Lighting Power control system: SITC of Well designed and engineered Wall mount

direct light distribution panel with necessary indicators, MCBs and proper ear thing undergone through 7Tank chemical treatment to keep them rust free duly powder coated in black matt texture finish with suitable nylon glands for outing power cables.

SITC of 4-way MS fabricated power lighting

junction box made up of 22SWG CRCA sheet of Jindal make undergone through various chemical treatment to keep them rust free and duly powder coated with suitable FC7 nylon glands.

SITC of MS Fabricated duly powder coated DMX signal box and DMX loop box with DMX connecters, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 nylon glands.

SITC of installation Hardware’s for complete Grid system and cabling systems

Lot 1

3

SITC of Chroma arrangement for size of 4mtr x 3.3mtr including fabricated Tie down railing, Tolleys, I Track and leading edge frame, cloth to tie it drum tight. All the fabricated items undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish

Lot 1


Lights for News desk

4

SITC of 90W LED light panel complete with 2 diffusers, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below.

Lamp power - 90W • Power supply - 230/240V AC to DC 14V 7A • Power cable - 3 core 1.5 sq. mm.

copper PVC insulated • Color Temperature: 3200K • Dimming - 0-100% through manual and DMX • Beam Angle - 30° • Operating Temperature - -30°C to +55°C • Protection rating - IP20 • Dimension - 480 x 530 x 100mm • Weight - 4.5Kg

Nos 6

5

SITC of 200W LED Fresnel spot light, 3200K with with 25780 lux at 3mtr in spot, 2417 lux at 3mtr in flood complete with 200mm dia imported German Lens, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. • Lamp power - 200W • Power supply - 230/240V AC • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 3200K • CRI - >90 • Dimming - 0-100% through manual and DMX • Beam Angle - 10°-50° or 30° or 60° • Protection rating - IP20 • Dimension - 395 x 370 x 450mm • Weight - 10Kg

Nos 5


Lights for Chroma

6

SITC of 90W LED light panel complete with 2 diffusers, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below.• Lamp power - 90W • Power supply - 230/240V AC to DC 14V 7A • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 5600K • Dimming

- 0-100% through manual and DMX • Beam Angle - 30° • Operating Temperature - -30°C to +55°C • Protection rating - IP20 • Dimension - 480 x 530 x 100mm• Weight - 4.5Kg.

Nos 6

7

SITC of 200W LED Fresnel spot light, 5600K with with 26600 lux at 3mtr in spot, 2470 lux at 3mtr in flood complete with 200mm dia imported German Lens, normal operated yoke provided, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. • Lamp power - 200W • Power supply - 230/240V AC • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 5600K • CRI - >90 • Dimming - 0-100% through manual and DMX • Beam Angle - 10°-50° or 30° or 60° • Protection rating - IP20 • Dimension -

Nos 2


Amount in Words:

8

SITC of Light accessories for above quoted lights :- SITC of Die cast aluminium "C" clamp with safety locking chain, duly powder coated in black matt texture finis, Lock - MS threaded Galvanized lock key, Plastic Glass filled nylon moulded M6 key, Pre-treated and black epoxy polyester powder coated and Safe working load – 150Kg.

SITC of 1.5mtr long safety bond with lock clip to be fixed around the grid and each lighting fixture to avoid fall of the fixture in case if the "C" clamp is not locked properly . SWL 100Kgs SITC of 4- leaf barn door, undergone through 7 Tank chemical treatment to keep them rust free and, duly powder coated in black matt texture finish

Lot 1

9

SITC of Digital Dimming system consists of Controller for the LED lights.•SITC of 96-channel Digital DmX lighting controller to control all the LED lights.. •SITC Grid mount photo isolator DMX splitter unit 1 DMX input and 8 isolated output with Power Supply: 90-240V AC, 45-63Hz - Control: DMX 512 protocol - Control Signal input: 5 pin XLR female- Size: 482 x 44 x 128mm - Weight: 2Kg SITC of DMX signal cable 5 core for DMX network with 5 pin DMX connecter.

Lot 1

10

SITC of copper un armoured FRLS flexible cable power cables, Powder coated cable trays and consumables and green Chroma Cloth.

Lot 1

Total amount inclusive of all taxes in INR- say ‘C’


Abstract

Sl. no Sub head titles of the project Total amount including all

taxes in INR

1 BOQ for TV studio setup- Say ‘A’

2 BOQ for community radio studio setup- Say ‘B’

3 BOQ for studio lightings setup- Say ‘C’

Total amount inclusive of all applicable taxes,

customs, duties etc if any in INR*

Amount in words:

Notes: The total value which arrives in the above indicated abstract will become the

overall financial bid value and it will be the L1 deciding factor after the qualifying in the

technical evaluation.


3.12 Format of the CHECK LIST for technical bid document

SL Description

Compliance / Confirmation by the Tenderer ( Please

Tick) √ Yes / No / Pl. Indicate Page No. of the

Bid document

1. Covering Letter

2. Check List with Page No.

3. Tender fees

4. EMD

5. General information of the bidder.

6. Details of works/services of similar nature carried out by the bidder during the last 5 years.

7. Details of the on-going projects.

8. Last Three years audited financial statement with balance sheets

9.

Solvency certificate from nationalized or scheduled bank and issued within a period of 12

Months from the final date of submission of the tender.

10. Authorization letter for signing the bid document on behalf of the bidder.

11. Affidavit regarding blacklisting

12. OEM’s Certificates

13. Documents pertaining to the eligibility criteria

14. Compliance statement

15. Un-priced commercial bid

16. VAT, ST, PAN, etc.

17. Technical data sheets

18. Details of the staff to be deployed at site.

19. Any other documents bidder would like to attach

Strike out if not applicable. The bids not complied with the Check list , will be summarily rejected


3.13 Format for the item wise compliance of all the items of TV,CRS, Studio lightings parts.

SL DESCRIPTION Complied Yes/NO Deviations