Rescue Technician Vehicle Level I - Connecticut...Rescue Technician Vehicle Level I Skills Evaluation Sheets 2013 Edition STATE OF CONNECTICUT COMMISSION ON FIRE PREVENTION AND CONTROL

Rescue Technician Vehicle Level I

Skills Evaluation Sheets 2013 Edition

STATE OF CONNECTICUT COMMISSION ON FIRE PREVENTION AND CONTROL

860-627-6363 In-State Toll Free - 1-877-528-3473

State of Connecticut COMMISSION ON FIRE PREVENTION AND CONTROL

Rescue Technician – Vehicle I Level I Skill Evaluation Sheets

Prevent or prohibit any unsafe acts. Contact the Chief Examiner at any time with any questions.

Remember, you are an evaluator, not a trainer…

IN THE EVENT OF FAILURE OF THIS SKILL, EVALUATOR MUST COMPLETE REVERSE SIDE.

SS# Skill Sheet Title NFPA 1006 Objective 2013 Edition 10.1.1 Plan a Vehicle Incident 10.1.1, 10.1.1)A()B) 10.1.2 Establish Scene Safety 10.1.2, 10.1.2(A)(B), 10.1.3 Establish Fire Protection 10.1.3, 10.1.3(A)(B) 10.1.4 Vehicle Stabilization 10.1.4, 10.1.4(A)(B) 10.1.5 Manage Energy Sources 10.1.5, 10.1.5(A)(B) 10.1.5A Access &Disentanglement - Hand Tools 10.1.5, 10.1.5(A)(B) 10.1.6 Determine Access & Egress 10.1.6, 10.1.6(A)(B) 10.1.7 Access Common Vehicle 10.1.7, 10.1.7(A)(B) 10.1.8A Airbag Operation 10.1.8, 10.4.8(A)(B) 10.1.8B Air Chisel Operation 10.1.8, 10.1.8(A)(B) 10.1.8C Hydraulic Tool Operation 10.1.8, 10.1.8(A)(B) 10.1.8D Reciprocating Saw Operation 10.1.8, 10.1.8(A)(B 10.1.8E Disentanglement 10.1.8, 10.1.8(A)(B) 10.1.9A Stabilize, Package, & Removal 10.1.9, 10.1.9(A)(B) 10.1.10 Termination 10.1.10, 10.1.10(A)(B) 5/27/15


Rescue Technician – Vehicle Levels I




Skill Sheet No. 10.1.1 Primary Task: Plan a Vehicle Incident Objective(s) : 10.1.1, 10.1.1(A)(B) NFPA Standard: 1006 Candidate #

Performance Evaluation Sheet

Task

1st 2nd

1. Size up

2. Operation protocols

3. Use planing forms

4. Evauluate vehicle

5. Request resources

6. Establish fire protection correctly

7. Determine potential hazards

Failure of this task mandates failure on the entire objective

Safety is PARAMOUNT Total number tasks candidate must complete to pass 5

12/1/14


Rescue Technician Vehicle Levels I




Skill Sheet No. 10.1.2 Primary Task: Establish Scene Safety Objective(s) : 10.1.2, 10.1.2(A)(B) NFPA Standard: 1006 Candidate #


Task

1st 2nd

1. Perform recon from safe location

2. Determine potential hazards

3. Determine appropriate Personal Protective Equipment

4. * Establish and marks zones

5. Deny entry to unauthorized personnel

6. Select and mark entry and exit paths through the zone

7. Position and apply traffic control devices

8. Ensure vehicle stability will not be compromised through chosen points



12/1/14






Skill Sheet No. 10.1.3 Primary Task: Establish Fire Protection Objective(s) : 10.1.3, 10.1.3(A)(B) NFPA Standard: 1006 Candidate #


Task

1st 2nd

1. Don appropriate Personal Protective Equipment

2. Identify hazards

3. Establish zones

4. Choose proper extinguishing device

5. Apply fire control stratagies correctly

6. Manage possible ignition



12/1/14






Skill Sheet No. 10.1.4 Primary Task: Vehicle Stabilization Objective(s) : 10.1.4, 10.1.4(A)(B) NFPA Standard:1006 Candidate #


Task

1st 2nd

Stabilization

1. Select and don approriate Personal Protective Equipment

2. Select structurally sound stabilization points

3. Stabilize vehicle appropriately

4. Access points made safe

5. Ensure vehicle stability is not compromised



12/1/14


Rescue Technician – Vehicle / Machinery Levels I




Skill Sheet No. 10.1.5A Primary Task: Access and Disentanglement – Hand Tools Objective(s) : 10.1.5, 10.1.5(A)(B), 10.1.7, 10.1.7(A)(B),

10.2.5, 10.2.5(A)(B), NFPA Standard: 1006 Candidate #


Select and use task and incident specific tools and devices for securing and disabling given hazards.

1st 2nd

1. Screwdriver

2. Hammer

3. Hacksaw

4. Ratchet set

5. Glass cutters

6. Center punch

7. Crowbar

8. Wrenches (assorted)

9. Ratchet cutter

10. Crash axe

11. Bolt cutters

12. Halligan bar

13. Pry bar

14. Sledgehammer

15. Come-a-long

16. Large flat head axe

Failure any task mandates failure on the entire objective


12/1/14






Skill Sheet No. 10.1.5 Primary Task: Manage Energy Sources Objective(s) : 10.1.5,10.1.5(A)(B) NFPA Standard: 1006 Candidate #


Task

1st 2nd


2. Identify energy hazards

3. Isolate and manage energy hazards

4. Identify specialized systems

5. Use tools correcty



12/1/14






Skill Sheet No. 10.1.6 Primary Task: Determine Access & Egress Objective(s) : 10.1.6, 10.1.6(A)(B) NFPA Standard:1006 Candidate #


Task

1st 2nd

1. Identify entry & exit points

2. Identify victim locations

3. Assess machine stability

4. Entry and exit points don’t compromse vehicle stability



12/1/14


Rescue Technician – Vehicle Levels




Skill Sheet No. 10.1.7 Primary Task: Access Common Vehicle Objective(s) : 10.1.7, 10.1.7(A)(B) NFPA Standard:1006 Candidate #


Task

1st 2nd

1. Use appropriate Personal Protective Equipment

2. * Protect patient

3. Access points made safe

4. Make access with appropriate tools (indicate tools being used)

5. Determine emergency escape route



12/1/14






Skill Sheet No. 10.1.8A Primary Task: Airbag Operation Objective(s) 10.1.8, 10.1.8 (A)(B) NFPA Standard: 1006 Candidate #


1st 2nd


2. * Determine correct airbag for specific load and lift

3. Identify hazards with placement and use

4. Correctly assemble and operate airbag system

5. Check regulator working pressure

6. Visually inspect relief valves

7. Connect inline shut off/relief valve properly

8. Demonstrate proper cleaning and maintenance



12/1/14






Skill Sheet No. 10.1.8B Primary Task: Air Chisel Operation Objective(s) :10.1.8, 10.1.8(A)(B) NFPA Standard: 1006 Candidate #


1st 2nd

1. Ensure all appropriate Personal Protective Equipment in place

2. Select proper cutting bit


4. Correctly assemble and operate tool

5. * Safety check system for operation

6. Demonstrats proper cutting of sheet metal




12/1/14






Skill Sheet No. 10.1.8 C Primary Task: Hydraulic Tool Operation Objective(s) 10.1.8, 10.1.8(A)(B) NFPA Standard: 1006 Candidate #


1st 2nd


2. Select appropriate tool


4. Correctly assemble and operate tool



7. Demonstarte proper tool technique




12/1/14






Skill Sheet No. 10.1.8 D Primary Task: Reciprocating Saw Operation Objective(s) :10.1.8, 10.1.8(A)(B) NFPA Standard: 1006 Candidate #


1st 2nd


2. Select proper blade


4. Correctly assembls and operats tool


6. Demonstrate proper cutting




12/1/14






Skill Sheet No. 10.1.8E Primary Task: Disentanglement Objective(s) :10.1.8, 10.1.8 (A)(B) NFPA Standard: 1006 Candidate #


Task

1st 2nd

1. Use appropriate Personal Protective Equipment

2. Evaluate entrapment

3. Determines points of entrapment

4. Select appropriate tools

5. Disentangle patient

6. * Ensure patient safety at all times

Failure of any task mandates failure on the entire objective


12/1/14


Rescue Technician – Vehicle / Machinery Levels I




Skill Sheet No. 10.1.9A Primary Task: Stabilize, Package, and Removal Objective(s) : 10.1.9, 10.1.9(A)(B), NFPA Standard: 1006 Candidate #


Task

1st 2nd

Stabilize and Packaging

1. Stabilize spine (if selected scenario warrants)

2. Manage injury/illness

3. Ensure appropriate intervention

4. Select appropriate packaging device(s)

5. * Secures patient properly using approved means

6. * Ensure all maneuvers were completed safely

7. Check that patient is secured to device (verbalize findings)

Removal

8. Direct team while they move patient

9. * Ensure safety of operation

10. * Remove victim from hazard



12/1/14






Skill Sheet No. 10.1.10 Primary Task: Terminate Objective(s) : NFPA Standard: 1006 Candidate #


Task

1st 2nd

1. Ensures proprer Personal Protective Equipment is doned during termination

2. Evaluates potetial hazards

3. Utilizes proper techniques when removing equipment

4. Communicates hazards to person responsible for vehicle

5. Notifies appropriate agencies

6. Preserves integrity of vehicle or investigation



Documents

Rescue Technician Vehicle Level I - Connecticut...Rescue Technician Vehicle Level I Skills Evaluation Sheets 2013 Edition STATE OF CONNECTICUT COMMISSION ON FIRE PREVENTION AND CONTROL