26
If your respirator does not fit correctly, you are not protected. Fit testing will ensure your respiratory programme meets the requirements of the AS/NZS Standards. 4 RESPIRATORY PROTECTION Don’t gamble with safety. 67

RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

If your respirator does not fit correctly, you are not protected.

Fit testing will ensure your respiratory programme meets the requirements of the AS/NZS Standards.

4

RESP

IRA

TORY

PR

OTE

CTI

ON

Don’t gamble with safety.

67

Page 2: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

THE AUSTRALIAN AND NEW ZEALAND STANDARD 1715: 2009, SELECTION, USE AND MAINTENANCE OF RESPIRATORY PROTECTIVE EQUIPMENT (RPE), HAS GUIDELINES TO HELP WORKPLACES CHOOSE, USE, AND MAINTAIN RESPIRATORY PROTECTIVE EQUIPMENT (RPE) CORRECTLY.

To comply with AS/NZS 1715 you need to have a programme in place that covers the following:

1. APPOINTING A PROGRAMME ADMINISTRATOR

2. SELECTION OF RPE

3. MEDICAL SCREENING OF END USERS

4. TRAINING

5. ISSUE OF RPE

6. FITTING OF EQUIPMENT

7. RESPIRATORY TESTING

8. WEARING OF RPE

9. MAINTENANCE OF RPE

10. RECORD KEEPING

11. PROGRAMME EVALUATION

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

R E S P I R A T O R Y P R O T E C T I O N R E S P I R A T O R Y P R O T E C T I O NR

ES

PIR

AT

OR

Y P

RO

TE

CT

ION

68

RESPIRATORY GUIDELINES

Particulate respirators filter finely divided solid or liquid particles from the air. The wearer’s normal breathing action draws contaminated air through a filter that traps contaminant particles on impact, allowing only filtered air through to the user. A range of particulate filters are available, depending on the characteristics of the contaminant.

Gas/vapour filters Respiratory protection against gas or vapour contaminants make use of a filter that absorbs or reacts with the contaminant. They are classified according to the total capacity of the filter, NOT efficiency against a given contaminant, as follows:

Class AUS – Low absorption capacity.

AUS

Class 1 – Low to medium absorption capacity. Max gas/vapour concentration 1,000 ppm.

A1 B1 E1 K1 P1

Class P1 Filter – mechanically generated dusts, such as sanding, grinding, mining, etc. Particulate filter efficiency 80%.

P2Class P2 Filter – thermally and mechanically generated contaminants and metallic fumes, such as smelting or welding. Particulate filter efficiency 94%.

P3Class P3 Filter – high-efficiency filter when used with a full-face piece. Used when handling highly toxic dusts or powders, such as organophosphate insecticides and radionuclides. Particulate filter efficiency 99.95%.

1. PROGRAMME ADMINISTRATOR

As part of the establishment of a Respiratory Protection Programme where RPE is required to be worn the appointment of a programme administrator is now mandatory. The Administrator is responsible for completing the requirements stipulated in the guidelines and should have the full support of management.

2. SELECTION OF RPEWHEN SELECTING RPE IT IS IMPORTANT TO ENSURE THAT ONLY RPE COMPLYING TO AS/NZS 1716 BE USED.

RPE needs to be worn whenever the person is exposed to excessive levels of contaminant.

Factors for selection:

• Contaminant

• Task

• Operator

• Equipment limitations

• Special response HAZMAT incidents

A2 B2 E2 K2 Class 2 – Medium absorption capacity.

Max gas/vapour concentration 5,000 ppm.

AX – Low boiling point solvents ( <65˚C). Because of the nature of low boiling point solvents, this filter is one-use only and must be discarded after using.

AX

All staff that wear RPE should have an initial medical assessment prior to use.

The assessment should include:

PHYSIOLOGICAL CONSIDERATIONS There is a certain amount of effort required to breath through a negative pressure respirator. People with a history of cardiac or respiratory disorders should be medically assessed, especially where heavy work or prolonged wearing of RPE is needed.

Other factors could be as simple as facial hair breaking the seal on a close fitting mask.

PSYCHOLOGICAL CONSIDERATIONS Enclosed RPE like hoods, helmets or full face masks may give rise to feelings of claustrophobia, isolation and anxiety in some people.

3. MEDICAL ASSESSMENT OF RPE USERS

Combination filters Where both particulates and gas/vapour contaminants are present, dual-purpose filters can be used.

These are usually particulate filters or disposable respirators impregnated with an agent that reacts with vapours at low concentration and removes them. Alternatively, a particulate pre-filter may be used with a vapour filter to remove both types of contaminants.

P2

A1

Particulate filters

Page 3: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

R E S P I R A T O R Y P R O T E C T I O N R E S P I R A T O R Y P R O T E C T I O N

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

RESPIRATORY GUIDELINES CONTINUED

The AS/NZS 1715 S2(2.6) requires a suitable fit test to be carried out for all users of respirator protection equipment (RPE) with a close fitting facepiece, at least once a year. A quantitative respirator fit test guarantees precise evidence and documentation of results for each individual employee – in compliance with the AS/NZS Standards.

NZ SAFETY PROVIDES ON SITE RESPIRATORY TRAINING & FIT TESTING

4. TRAININGTRAINING NEEDS TO BE PROVIDED BY A COMPETENT PERSON.

The training should include:• Identification of the hazard• Reason for the RPE• RPE selection• Use and proper fitting of RPE• Wear time• Limitations of RPE• Maintenance and Storage• A summary of the respiratory protection

programme in the workplace

5. ISSUE OF RPEWhere practicable RPE shall be issued for a wearers exclusive use. Records documenting the issue of mask and consumables (filters etc.), and maintenance of the mask need to be established. Filters need to be marked with the date of issue and users ID. Non-personal RPE must be cleaned prior to re-issue.

6 & 7. FITTING AND TESTING OF RPE

All RPE that requires a close fitting facepiece to operate, has to be properly fitted to the wearer. Regular users of RPE require an annual fit test in accordance with the standards.

THERE ARE TWO TYPES OF FACIAL FIT TESTS – QUALITATIVE AND QUANTITATIVE.

• Qualitative tests are usually simple and fast but may be influenced by the wearer, and are subjective.

• Quantitative testing is not subjective but requires a trained operator. Full face respirators have to be tested with a quantitative test method to obtain the full protection factor.

8. WEARING OF RPEThe respiratory programme is there to ensure that RPE is worn correctly, fits correctly and is used when and where required.

9. MAINTENANCE OF RPE

MAINTENANCE OF RPE NEEDS TO BE CARRIED OUT TO THE MANUFACTURERS INSTRUCTIONS.

This includes:

• Cleaning and disinfection

• Inspection that equipment is in working order

• Repair and replacement of components (including replacement of filters)

• Storage and disposal RPE that isn’t properly maintained and cleaned can give the wearer a false sense of security and put their health at risk.

10. RECORD KEEPINGRecords for a respiratory programme should include details of:

ISSUE OF RPE • Date, identifying mark

USER RECORDS • Training, fit test, medical screening

MAINTENANCE • Filter replacement schedule • RPE maintenance schedule

PROGRAMME RECORDS • Procedures • Audits and evaluations • Atmospheric monitoring records • Health surveillance

11. PROGRAMME EVALUATION

The respiratory protection programme needs to be audited at least annually with adjustments made as appropriate to reflect the evaluation results.

69

IF YOUR RESPIRATOR DOES NOT FIT CORRECTLY, YOU ARE NOT PROTECTED!

Page 4: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

70

F U L L F A C E R E S P I R A T O RH A L F F A C E R E S P I R A T O R

7000 SERIES HALF MASK

CODE 407272 Small 407273 Medium 407274 Large

7000 SERIES HALF MASK

• Ultra- light weight with adjustable head cradle for comfort and a secure fit• only six parts for ease of cleaning and maintenance• Unique, optional ‘drop down’ feature• Uses the same filter range as the 9000 series full face mask

A C C E S S O R I E S

Adjustable head harness for a custom fit.

Compact, fits underwelding helmets.

Low profile, angled cartridge placementfor wider field of vision.

7000 SERIES HALF MASK

CONTOURED NECK BUCKLES FOR COMFORT AND QUICK ATTACHMENT.

ATTACHED EXHALE COVER FOR EASY INSPECTION.

7000 IN DROP DOWN MODE.

7000 SERIES HALF MASK SPARES

CODE 407283 Head harness assembly 407284 Diaphragm valve kit (20 inhale, 5 exhale) 407285 Gasket (each) 407626 Respirator wipes pack of 10 407627 Respirator wipes pack of 50 407628 Respirator wipes pack of 100 8020 Filter splash/spark guard

Keep respirator handy when not in use.

Page 5: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

71

F U L L F A C E R E S P I R A T O RH A L F F A C E R E S P I R A T O R

A C C E S S O R I E S

9000 SERIES FULL FACE MASK SPARES

CODE 407288 Replacement nose cup medium/large 407289 Replacement nose cup small 407290 Spectacle kit 407286 Head harness 407284 Diaphragm valves (20 inhale, 5 exhale) 407285 Gasket (each)

Stand away head harness for easy donning.

Over-moulded flange to lens. Eliminates heavy metal clamping frame for less weight and fewer parts.

Completely free of metal parts.

Panoramic lens with peripheralvision side panels.

Lens with scratch resistantCoating meets AS/NZS 1337for impact protection.Tear away lens protector.

OH&S new product of the year winnerThe exclusive over-moulded lens design eliminates the usual heavy clamping metal frame to create an innovative full face with lighter weight. Fewer parts, greater field of vision and minimal maintenance.

LEADING TECHNOLOGY

9000 SERIES FULL FACE

9000 SERIES FULL FACE MASK

Moldex 9000 provides premium features at an affordable price.• Ultra-light weight for comfortable fit• Only ten parts for easy maintenance• Provides excellent field of vision• Easy to don and doff• Uses the same filter range as 7000 series half mask

9000 SERIES FULL FACE MASK

CODE 407291 Small 407292 Medium 407293 Large

INTEGRATED EXHALE AREA WITH ATTACHED COVER. FEWER PARTS, SIMPLE MAINTENANCE AND INSPECTION.

LIGHTEST WEIGHT FACE-PIECE OF ANY POPULAR MODEL. WEIGHS LESS THAN 360 GRAMS.

Page 6: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

72

F I L T E R S R E S P I R A T O R K I T S

9000 SERIES FULL FACE MASK

CODE 407291 Small 407292 Medium 407293 Large

7000 SERIES HALF MASK

CODE 407272 Small 407273 Medium 407274 Large

PIGGY BACK RETAINER 7920

Used to combine the 7100A & 7600A gas cartridges with the 7940A particle filters.

CODE 407279

A C C E S S O R Y

MOLDEX FILTERS FOR 7000 & 9000 RESPIRATORS

P2 PRE-FILTER 8010 AND RETAINER

Used with the Pre-filter Retainer to add P2 level protection to gas cartridges. The retainer can be used with all cartridge and filter discs.

CODE 8910 P2 Pre-filters pack of 5 pairs 407276 Pre-filter Retainer

MULTI-GAS/VAPOUR SMART® CARTRIDGE - 7600A

Multi-gas: Organic vapours, (boiling point > 65˚c), inorganic and acid gases, ammonia and methylamine.

CODE 407278

ORGANIC VAPOUR CARTRIDGE - 7100A

A1 for organic gases and vapours with boiling point > 65˚c

CODE 407277

P2/P3 FILTER DISK WITH NUISANCE ORGANIC VAPOURS - 7960A

Same uses as 7940A P2/P3 filter disk plus an added carbon layer helps protect user from nuisance (below the exposure standard) levels of organic vapours. P2 when used with 7000P3 when used with 9000

CODE 407281

P2/P3 FILTER DISC - 7940A

Use as a stand alone filter or use with the 7920 Piggyback Adaptor with any Gas/Vapour Cartridge. P2 when used with 7000P3 when used with 9000

Applications: Welding, grinding, lime, metal machining, aluminum processing, bagging, brazing, buffing, cement work, dusty environments, foundries, metal working, mining, polishing, poultry, sanding, soldering, stone quarrying, sweeping, textiles, torch cutting, waste processing/recycling.

CODE 407280

P2/P3 CARTRIDGE - 7990A

P2 when used with 7000 P3 when used with 9000

Applications: For contaminants of substances include asbestos, lead, inorganic arsenic and cadmium. Also for use in environments where oil-based particulates are present.

CODE 407282

A1 P2/P3

P2/P3

P2/P3

B1A1 E1 K1

P2

Page 7: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

73

F I L T E R S R E S P I R A T O R K I T S

SPRAY RESPIRATOR KIT

Applications: Adhesives, degreasing, fibre glassing, pesticide spray, spray painting.

Kit Includes: 9000 Series Full Face Mask, A1 Organic Vapours Cartridge, P2 Pre-Filter, Pre-Filter Retainer, Respirator Wipes.

CODE 410927 Small 410928 Medium 410929 Large

FINE DUST RESPIRATOR KIT

Applications: Concrete and construction dust, foundry, glass wool, lead and metal fume.

Kit Includes: 9000 Series Full Face Mask, P2/P3 Filter Disc, Respirator Wipes.

CODE 410924 Small 410925 Medium 410926 Large

MULTI-GAS RESPIRATOR KIT

Applications: Organic and inorganic vapours, acid gases, ammonia, formaldehyde, hydrogen chloride, hydrogen fluoride, hydrogen sulphide (escape only), sulphur dioxide.

Kit Includes: 9000 Series Full Face Mask, Multi-Gas/Vapour smart cartridge, Respirator Wipes

CODE 410921 Small 410922 Medium 410923 Large

9000 SERIES - FULL FACE KITS

P2P3

SPRAYING RESPIRATOR KIT

Applications: Adhesives, degreasing, fibre glassing, pesticide spray, spray painting.

Kit Includes: 7000 Series Half Mask, A1 Organic Vapours Cartridge, P2 Pre-Filter, Pre-Filter Retainer, Respirator Wipes.

CODE 408989 Small 408990 Medium 408991 Large

FINE DUST RESPIRATOR KIT

Applications: Concrete and construction dust, foundry, glass wool, lead and metal fume.

Kit Includes: 7000 Series Half Mask, P2 Filter Disc, Respirator Wipes.

CODE 408986 Small 408987 Medium 408988 Large

WELDING RESPIRATOR KIT

Applications: Brazing, torch cutting and welding fume, dry pesticides, nuisance level organic vapours and ozone

Kit Includes: 7000 Series Half Mask, P2 Filter Disc Plus Nuisance Organic Vapours, Respirator Wipes.

CODE 408983 Small 408984 Medium 408985 Large

MULTI-GAS RESPIRATOR KIT

Applications: Organic and inorganic vapours, acid gases, ammonia, formaldehyde, hydrogen chloride, hydrogen fluoride, hydrogen sulphide (escape only), sulphur dioxide

Kit Includes: 7000 Series Half Mask, Multi-Gas / Vapour smart cartridge, Respirator Wipes.

CODE 408980 Small 408981 Medium 408982 Large

7000 SERIES - HALF MASK KITS

B1A1 E1 K1

B1A1 E1 K1

P2

P2 P2A1

Size matters• Even with the correct filters for the

job you still won’t be protected if your mask doesn’t fit

• Every face is shaped differently so the correct size mask must be selected for a better fit

• Moldex respirator kits are sold in S, M, L size masks

• You will find a mask sizing station in every NZ Safety branch that will enable the mask wearers to get the right fit

SIZE MATTERS

A1

Page 8: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

74

R E S P I R A T O R K I T SR E S P I R A T O R S

HALF FACE RESPIRATOR 6000 SERIES

• Simple and lightweight reusable respirator• Thermoplastic Elastomer (TPE) facepiece• Cradle head harness and easy to fasten

neck strap• Low profile and well balanced twin

cartridge and filter design• For use with 3M™ 2000, 5000 and 6000

series cartridges and filters (sold separately)• Complies with AS/NZS 1716:2012

CODE 116785 Small 6100 116688 Medium 6200 116793 Large 6300 116690 Drop-down mask Medium 116692 Drop-down mask Large

HALF FACE RESPIRATOR 7500 SERIES

• Soft silicone material for extra comfort and durability

• Proprietary 3M™ Cool Flow™ Exhalation valve and design minimises heat build-up and reduces fogging when wearing eye protection

• Low profile and well balanced twin cartridge and filter design

• For use with 3M™ 2000, 5000 and 6000 series cartridges and filters (sold separately)

• Complies with AS/NZS 1716:2012

CODE 7501 Small 7502 Medium 7503 Large

FULL FACE RESPIRATOR 6000 SERIES

• Lightweight and well balanced • Wide field of vision. Polycarbonate,

high impact visor• Proprietary 3M™ Cool Flow™

Exhalation valve provides low breathing resistance and minimises heat-build up in the respirator

• Low profile and well balanced twin cartridge and filter design

• For use with 3M™ 2000, 5000 and 6000 series cartridges and filters (sold separately)

• Complies with AS/NZS 1716:2012

CODE 116460 Small 6700 116463 Medium 6800 116465 Large 6900

A C C E S S O R I E S A C C E S S O R I E S A C C E S S O R I E S

HALF FACE RESPIRATOR SPARE PARTS - 6000

CODE 6893 Inhalation valve - White 6889 Exhalation valve - Blue 6895 Inhalation gasket - Orange 110266 Head harness

assembly 6281

HALF FACE RESPIRATOR SPARE PARTS - 7500

CODE 7582 Inhalation valve - Blue 7583 Exhalation valve - Blue 406561 Replacement head straps 7580 500479 Head harness

assembly 7581

FULL FACE RESPIRATOR SPARE PARTS - 6000

CODE 405541 Lens cover clear 6885 (pack of 25) 6893 Inhalation valve - White 7583 Exhalation valve - Blue 6895 Inhalation gasket - Orange 6896 Centre adaptor gasket 6897 Head harness assembly 6898 Lens assembly

6893 6889 7582 6893

6895

6896

7583 7583

405541

6898

406561

500479

6895

110266

6897

Page 9: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

75

R E S P I R A T O R K I T SR E S P I R A T O R S

SPRAYING RESPIRATOR KIT 6251, A1P2

Applications: Paint spraying, pesticide spraying, chemical handling, fibreglassing, printing, degreasing.

Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ Organic Vapour Cartridges 6051, 1 pair of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.

CODE 406529

MULTI-GAS RESPIRATOR KIT 6259, A1B1E1K1P2

Applications: Range of vapours and gases including (but not limited to): chlorine, sulphur dioxide, solvents (boiling points >65˚c), hydrogen sulphide, ammonia, hydrogen chloride.

Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ Multi-Gas Cartridges 6059, 1 pair of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.

CODE 406530

SPRAYING RESPIRATOR KIT 7551, A1P2

Includes 3M™ Half Face Reusable 7500 Series Respirator (medium) for extra comfort and durability.

Applications: Paint spraying, pesticide spraying, chemical handling, fibreglassing, printing, degreasing.

Kit Includes: 3M™Organic Vapour Cartridges 6051, 5 pairs of 3M™ Particulate Filters 5925 (P2), 3M™ Filter Retainers 501, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.

CODE 406532

DUST/PARTICLE RESPIRATOR STARTER KIT 6225, P2

Applications: Sanding/sawing, lead paint removal, food manufacturing, insulation, drilling/cutting, masonry, grinding, powder coating.

Kit Includes: 3M™ Half Face Respirator 6000 Series - Medium, 3M™ P2 Dust/Mist Filters 2125, 3M class 4 earplugs, respirator cleaning wipes and a respiratory protection guide.

CODE 406266

ASBESTOS/DUST RESPIRATOR KITS

Applications: Suitable for certain asbestos work. Also for lead paint removal, sanding, sawing, drilling, cutting, grinding, masonry, insulation, (silica & beryllium - full face only).

Kit Includes: 3M Half or Full Face Respirator (S, M or L), 3M™ Particulate filters 6035 P2/P3* x 2 pair, 3M eyewear (7535 kit only), 3M class 4 earplugs and respirator cleaning wipes.

ASBESTOS/DUST KIT 7535 HALF FACECODE 411360 Small

411361 Medium 411362 Large

ASBESTOS/DUST KIT 6835 FULL FACE (PICTURED ABOVE)CODE 411363 Small

411364 Medium 411365 Large

* Higher P3 protection factors only achieved with a 3M Full Face Respirator.

WELDING RESPIRATOR KIT 7528, GP2

Includes 3M™ Half Face Reusable 7500 Series Respirator (medium) for extra comfort and durability.

Applications: Welding, soldering/brazing, grinding/polishing, drilling, metal pouring, machining.

Kit Includes: 3M™ GP2 Particle & Metal Fume Filters 2128, 3M class 5 earplugs, respirator cleaning wipes and a respiratory protection guide.

CODE 406531

B1A1 E1 K1 P2

A1 P2 A1 P2

P2

GP2

P2/P3*

Page 10: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

76

F I L T E R SF I L T E R S

FILTER, RETAINER & ADAPTOR

501 retainer holds the 5295 particulate filter onto the 6000 series cartridges.502 adaptor for attaching 2000 series filters with 6000 series cartridges.

CODE 404775 Filter retainer 501 404777 Filter adaptor 502

ORGANIC VAPOURS & TOXIC PARTICULATES CARTRIDGE 6098, AXP3

Low boiling point organic vapours (< 65˚C) and toxic particulates. Working with highly volatile solvents such as methanol, 1,3-butadiene or acetalehyde in chemical plants, composites manufacturing or coatings. Filter is single use only and must be worn with a 3M Full Face Respirator. Two pairs per box.

CODE 407942

AX P3

*Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator

3M FILTERS FOR 6000 AND 7500 RESPIRATORS

ORGANIC VAPOUR CARTRIDGE 6051, A1

Organic vapours (boiling point > 65°C). For protection when cleaning with or using organic solvents e.g. toluene, xylene and Mek. Also degreasing, mixing, using paint thinners, lacquers and glues.

CODE 406265

A1

ORGANIC VAPOURS & FORMALDEHYDE CARTRIDGE 6075, A1FORM

Organic vapours (boiling point > 65°C) and formaldehyde. For protection when working with solvents and formaldehyde such as chemical processing, plastic production, fibreboard manufacturing, healthcare and laboratory work.

CODE 406262

FORMA1

ORGANIC VAPOURS & ACID GASES CARTRIDGE 6057, A1B1E1

Organic vapours (boiling point > 65˚C), inorganic and acid gases. For protection when working with organic vapours and/or acid gases, e.g. toulene, chlorine, sulphur dioxide and hydrochloric acid.

CODE 406264

B1A1 E1

MULTI-GAS CARTRIDGE 6059, A1B1E1K1

Multi-gas: Organic vapours, (boiling point >65˚C), inorganic and acid gases, ammonia and methylamine. For protection when working with a variety of chemicals, e.g. solvents, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulfide.

CODE 406261

B1A1 E1 K1

ORGANIC VAPOURS & MERCURY CARTRIDGE, 6096 - A1HgP3*

Organic vapours (boiling point > 65˚C), mercury vapours, and particulates. Oil and gas refining, pest control (low levels of phosphine) healthcare when removing amalgam, or wherever mercury vapours may exist.

CODE 406260

A1 Hg P3*

AMMONIA & METHYLAMINE CARTRIDGE 6054, K1

Ammonia and methylamine. For protection against ammonia and methylamine used in the manufacture of fertilisers, synthetic fibres, dyes and refrigerant manufacturing. Four pairs per box.

CODE 406263

K1

MULTI-GAS CARTRIDGE 6099, A2B2E2K2 P3

Class 2 multi-gas and particles: organic vapours (boiling point > 65°C), inorganic and acid gases, ammonia and methylamine and particulates. Exposed to higher concentrations where class 2 protection is required. Working with a variety of chemicals (refer to 6059) as well as particulates. Must be worn with a 3M full face respirator. Two pairs per box.

CODE 404640

P3K2E2B2A2

404777

404775

Page 11: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

77

F I L T E R SF I L T E R S

CODE 4047773M FILTERS FOR 6000 AND 7500 RESPIRATORS

PARTICULATE FILTER 5925, P2

P2 protection against dusts and mists when fitted to 6000 series cartridges with the 501 retainer. 5 pairs per box.

CODE 406423

RESPIRATOR WIPES 504

• Pre-moistened towelettes for hygienically cleaning reusable respirators

• Alcohol free and individually packed

CODE 114537 Box of 100 wipes

OZONE AND NUISANCE LEVEL ORGANIC VAPOUR/ACID GAS FILTER 2138 GP2/GP3*

Toxic particulates, nuisance** level acid gases and organic vapours with low vapour pressure. For protection against toxic particulates such as mould remediation. Also for nuisance** level acid gases and organic vapours with low vapour pressure <1.3 Pa @ 25˚C.

CODE 406254

OZONE & NUISANCE LEVEL ACID GAS FILTER 2128, GP2

Particulates, ozone and nuisance** level acid gas and organic vapours with low vapour pressure. For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure < 1.3 Pa @ 25°C.

CODE 406256

PARTICULATE FILTER 6038, P2/P3*HF

Unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust and aids in decontamination practices. For protection when working with particulates; hydrogen fluoride, nuisance** level organic vapours and acid gas. Includes working in certain chemical and fertiliser plants. 10 pairs per box.

CODE 409238

PARTICULATE FILTER 6035, P2/P3*

Unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust and aids in decontamination practices. For protection against certain particles, dusts, mists and fumes. Also for certain asbestos tasks (refer to Worksafe NZ guidelines). Carrying out lead or mould remediation. 10 pairs per box.

CODE 406258

*Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator**Nuisance levels are those levels below the Workplace Exposure Standard (WES)

GP2

GP2/GP3*

PARTICULATE FILTER 2135, P2/P3*

Toxic particulates. For protection against certain dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete, welding, brazing and smelting.

CODE 406255

P2/P3*HF

P2/P3*

PARTICULATE FILTER 2125, P2

Particulates. For protection against certain dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete.

CODE 406257

P2

PARTICULATE & HYDROGEN FLUORIDE FILTER 2076, P2HF

Particulates and hydrogen fluoride. For protection against certain dusts, mists e.g. working in certain chemical and fertiliser plants.

CODE 117048

P2HFP2

P2/P3*

Page 12: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

78

F I L T E R SF U L L F A C E R E S P I R A T O R S & F I L T E R S

SCOTT SAFETY PROMASK FULL FACE RESPIRATOR

Multi-functional full face respirator suitable for use with negative pressure and powered air respirators. The facepiece is made from a specially engineered halo-butyl elastomer compound offering high resistance to chemicals and aging. This Promask features a unique speech diaphragm which helps transfer clear and audible speech along with a sweat port in the chin pocket providing added comfort during extended wear times. Certified to AS/NZS 1716:2012.

CODE 119061

COMMON SPARE PARTS:CODE 119080 Polycarbonate visor

119085 Polycarbonate visor (Hard coated) 119065 Valve seat set 119071 Valve disc set 119073 Head harness (Rubber) 119087 Visor covers (Pkt of 10)

SARI FULL FACE RESPIRATOR

The Sari Full Face Respirator’s wide sealing edge provides excellent fit and is comfortable to wear for long periods without the user becoming tired or stressed. The large, distortion free visor is available in three types, Polycarbonate, Polyamide or Triplex glass visor. Misting up is prevented by directing the inhalation air flow across the inside of the visor and the safeguarded speech diaphragm enhances clear communication. Utilising the full range of Pro2000 filters (sold separately) or attach to powered air purifying respirators (PAPR) or Airline Systems. Certified to AS/NZS 1716:2012.

CODE 119431 Sari full face mask silicone (Yellow) 119458 Sari full face mask rubber (Grey)

COMMON SPARE PARTS:CODE 119466 Polyamide visor

119695 Triplex glass visor 119571 Valve set 119725 Silicone head harness 119563 Visor covers (Pkt of 10)

PRO2000 FILTERS FOR PROMASK AND SARI RESPIRATORS

COMBINATION FILTER CF22 B2P3

B2P3 combination filter for inorganic gases & vapours, solid & liquid particles, radioactive & toxic particles, bacteria & viruses, fumes & mists.

CODE 119628

PARTICLE FILTER PF10 P3

Particulate filter for solid/liquid particulates, radioactive, toxic particles, bacteria, viruses, fumes/mists.

CODE 119652

COMBINATION FILTER CF32 E2P3

E2P3 combination filter for sulphur dioxide, acid gases, solid & liquid particles, radioactive & toxic particles, micro-organisms (bacteria, viruses & spores) & enzymes, fumes & mists.

CODE 119636

K2

B2 P3

P3

E2 P3

COMBINATION FILTER CF22 A2P3

A2P3 combination filter for organic gases and vapours (e.g. solvents with a boiling point higher than 65˚C), solid and liquid particles, radioactive and toxic particles, bacteria and viruses, fumes and mists.

CODE 119601

A2 P3

COMBINATION FILTER CF32 A2B2E2K2P3

A2B2E2K2P3 combination filter for organic and inorganic gases and vapours, acid gases and vapours, ammonia and organic ammonia derivatives, solid and liquid particles radioactive and toxic particles and bacteria.

CODE 119539

K2E2B2 P3

COMBINATION FILTER CF22 A2B2P3

A2B2P3 combination filter for organic, inorganic gases and vapours, solid and liquid particles, radioactive and toxic particles, microorganisms (bacteria, viruses and spores) and enzymes, fumes and mists.

CODE 119635

B2A2 P3

GAS FILTER GF22 K2

K2 gas filter for ammonia and organic ammonia derivatives.

CODE 119644

GAS FILTER GF22 A2

A2 for organic gases & vapours e.g. solvents with boiling point higher than 65°C.

CODE 119120

A2

A2

Page 13: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

79

F I L T E R SF U L L F A C E R E S P I R A T O R S & F I L T E R S

PRO2000 FILTERS FOR PROMASK AND SARI RESPIRATORS

PHANTOM VISION P3 PAPR FILTER

Particulate filter for solid/liquid particulates,radioactive, toxic particles, bacteria, viruses,fumes/mists.

CODE 408916

PRE-FILTER KIT PRO2000

The pre-filter pad and retainer system is used in conjunction with the Pro2000 gas, vapour and particle filters to provide extended filter life.

CODE 119257 Pre-filter set. Incl. two holders and six pre-filters 119253 Pre-filter pack of 20

DID YOU KNOW...

PROFLOW SC120 PAPR USES THE FOLLOWING FILTERS PRO2000 CF22 A1P3, CF22 B1P3, CF32 B1E1K1P3, CF22 B1E1P3

PROFLOW SC160 USES THE FOLLOWING FILTERS PRO2000 PF10 P3 FILTER

Size mattersEven with the correct filters for the job you still won’t be protected if your mask doesn’t fit.

Quantitative Fit Testing guarantees clients precise evidence and documentation of results for each individual employee - in compliance with the AS/NZS Standards.

Portacount Pro+Portacount compares the particles outside a wearer’s mask with those inside it, that have got past the face seal. This will identify if the user has adequate levels of protection for the work being performed.

At the end of the test, a report is produced for inclusion in the employee’s records.

QUANTITATIVE FIT TESTING

AXP3 P3

COMBINATION FILTER CF32 A1B1E1K1HgP3

A1B1E1K1HgP3 combination filter for organic, inorganic acid gases and vapours, ammonia and organic ammonia derivatives, nitrogen oxides, carbon monoxide, mercury and mercury compounds, solid and liquid particles, radioactive and toxic particles,Microorganisms (bacteria, viruses and spores)And enzymes, fumes and mists.

CODE 119512

P3

COMBINATION FILTER CF22 AXP3

AXP3 combination filter for gases and vapours from organic compounds with boiling point below 65˚c, solid and liquid particles radioactive and toxic particles, bacteria and viruses, fumes and mists. Filter is single use only.

CODE 119504

COMBINATION FILTER CFR 32 A2B2E2K1HG CONO P3

Organic, inorganic acid gases and vapours, ammonia and organic ammonia derivatives, mercury, nitrogen oxides and carbon monoxide, solid and liquid, radioactive and toxic particles and micro-organisms, eg. Bacteria and viruses.

CODE 408392

COMBINATION FILTER CFR 22 A1B1E1K1 CONO P3

Organic, inorganic acid gases and vapours, Ammonia and organic ammonia derivatives, Nitrogen oxides, carbon monoxide, solid and liquid, radioactive and toxic particles and micro-organisms.

CODE 408391

P3B1A1 E1 K1 CO NO P3CO NOK1E2B2A2 Hg

Hg

Contact us to arrange on-site fit testing and a RPE toolbox today.

Page 14: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

80

F I L T E R SP O W E R E D A I R R E S P I R A T O R

CleanSpace2 combines the ease of use and mobility of a passive respirator with the added protection, reliability and durability of a positive air powered respirator. What makes CleanSpace2 so different is that it does this all in a small compact unit and without the high costs normally associated with the purchasing and maintaining PAPRs.

Reliable protection• High efficiency filtration of hazards

Innovation• Ergonomic design: compact

powered respirator with no trailing leads, cables or hoses

• Motor generates airflow up to 200L/min with only one moving part

• Provides positive pressure inside the mask, with an in-built pressure sensor that adjusts the air-flow to prevent contamination

• Breath activated On/Off operation

ApplicationsWelding, Woodworking, Manufacturing, Smelting, Construction, Recycling Plants, Emergency Services, Mining, Agriculture, Processing Plants, Grinding, DIY etc.

Ease of use• Simple to fit and use

• Changing filters is quick and intuitive

• Easy to clean; fast 2 hour charge

• On a single charge up to 11 hours* operating time (*with CleanSpace2™ Endurance Pack)

CompatibilityCleanSpace2 can be used with:

• Welding & Safety Helmets

• Goggles, Spectacles and Face Shields

• Hearing Protection

CLEANSPACE2

CLEANSPACE2™ MASK Q SERIES

• Soft, hygienic, non-allergenic medical grade silicone mask

• Smaller size for compatibility with glasses• Simple clip mechanism for easy changing

for different wearers, or removal for washing• Easily cleaned in warm soapy water or in

the top shelf of a dishwasher• Valve in the front of the mask for high

exertion workload or sudden expirations

CODE 408801 Medium 408802 Large

CLEANSPACE2™ STARTER KIT

Provides positive pressure inside the mask, with an inbuilt pressure sensor that adjusts the air-flow to prevent contamination. Breath activated On/off operation. CleanSpace2™ maximises filter life by only filtering the air that you breathe. Compatible with welding & safety helmets, goggles, spectacles and face shields, hearing protection.

Includes: Power Unit, filter, charger, harness, neckpads (thin and thick), flow test cap, storage bag (Does not include mask)

CODE 409014

CLEANSPACE™ MASK H SERIES

• Soft, hygienic, non-allergenic medical grade silicone mask

• Larger size for comfort and speech• Simple clip mechanism for easy changing

for different wearers, or removal for washing• Easily cleaned in warm soapy water or in

the top shelf of a dishwasher• Valve in the front of the mask for high

exertion workload or sudden expirations

CODE 409016 Small 409017 Medium

FRONT

BACK

C L E A N S P A C E 2 ™ A C C E S S O R I E S

HEAD HARNESS

Webbed harness that is comfortable, light and washable. For use during high exertion work for long periods of time or when the wearer is highly mobile.

CODE 409015

MASK CLEANING WIPES

• Mask and equipment cleaning wipes • Alcohol free• 100 sachet wipes per box.

CODE 409029

Page 15: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

81

F I L T E R SP O W E R E D A I R R E S P I R A T O R

CLEANSPACE2™ FILTERS

CLEANSPACE2™ PARTICULATE FILTER P3 AND HONEYCOMB SNAP LID

Particulate P3 filter to be used with the combined filter: 409026, 409028; and high efficiency; meltblown pad; suitable for use against solid particulates including dust, fumes, fibres, bacteria and viruses. Honeycomb snap lid (black) that snaps onto the gas cartridge case to hold the filter pad in place. Pack of 8 filters. Snap lid x 1.

CODE 411367

CLEANSPACE2™ PRE-FILTER

Thin, light particulate woven pre-filter; high quality; flame retardent pre-filter; Extends the life of the CleanSpace2™ particulate filters. Pack of 10.

CODE 409023

CLEANSPACE2™ FILTER COVER KIT

Replacement for filter cover; Includes filter cover with allen (Hex) key.

CODE 409021

CLEANSPACE2™ COMBINED FILTER AU:ABE1P3

A combination filter for protection against organic gases and vapours (boiling point >65˚c), inorganic gases and vapours and acid gases, dusts, mists and fumes.

CODE 409028

CLEANSPACE2™ PARTICULATE FILTER TTM3/P3 HEPA

Particulate filter; high efficiency. Suitable for use against solid and liquid particulates including dusts, mists, fumes, fibres, bacteria and viruses. Pack of 3.

CODE 409025

CLEANSPACE2™ FILTER ADAPTOR

CleanSpace2™ Filter Adaptor is designed to be fitted easily to the CS2 respirator to allow gas filters and P3 - Hi Capacity filter to be used. The Adaptor comes with a hex key.

CODE 409022

CLEANSPACE2™ HI CAPACITY PARTICULATE FILTER P3 HEPA

High capacity particulate filter. Suitable for use against solid and liquid particulates including dusts, mists, fumes, fibres, bacteria and viruses.

CODE 409024

CLEANSPACE2™ COMBINED FILTER AU:A1P3

A combination filter for protection against organic gases and vapours (eg solvents with a boiling point higher than 65˚C) and mechanical and thermally generated particles including dusts, mists and fumes generated by welding, grinding & sanding.

CODE 409026

CLEANSPACE2™ ENDURANCE PACK

External charging battery that provides an additional 5 hours operating time; AC adaptor and pouch. Weight 180g; No leads or wires; Light, comfortable and easy to use.

CODE 409019

CLEANSPACE2™ PORTACOUNT FIT TESTING ADAPTER

Attaches to the CleanSpace2™ for test fitting.

CODE 408797

CLEANSPACE™ THIN NECK PAD

Made of a light, washable neoprene fabric. For wearers with a thicker neck size. The thin neck pad is 0.7cm thick.

CODE 408799

CLEANSPACE2™ COOL NECK PAD

Long lasting (up to 8 hours) cooling effect. Ideal for heavy work & hot conditions. Re-useable up to 30 times. Easy re-activation in water. Place in fridge for 30 minutes for enhanced cooling effect. Polymer is non-toxic and hypo allergenic.

CODE 408803

C L E A N S P A C E 2 ™A C C E S S O R I E S

A1 P3

P3B1A1 E1

P3

P3

P3

P3

Page 16: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

82

H O O D S , F A C E S H I E L D S & H E L M E T SH E A D C O V E R S & H O O D S

VERSAFLO™ HEADCOVER S-133

• Easy to use, fully assembled polypropylene laminate head cover with integrated head suspension

• Wide field of view and scratch resistant Polyethylene Terephthalate Glycol (PETG) visor

• Soft elastic face-seal for improved comfort and reduced noise

Applications: General purpose, woodworking and food processing. Suitable for applications that require frequent replacement of the entire headtop assembly.

CODE 406534 Small/Medium 406533 Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10

VERSAFLO™ HOOD S-533

• Easy to use, fully assembled polyurethane coated polyamide hood with integrated head suspension

• Similar to S-433, but with a more durable, soft, low linting fabric that more readily drapes comfortably over the wearer

• Wide faceseal with soft elastic for improved comfort and reduced noise

• Wide field of view with added chemical and scratch resistance polycarbonate visor

Applications: Pharmaceutical manufacturing, liquid handling, battery manufacturing, health care, marine, refining and extraction. Suitable for applications that require neck and shoulder coverage and frequent replacement of the entire headtop assembly.

CODE 407927 S-533S Small/Medium 407926 S-533L Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10

VERSAFLO™ HOOD S-433

• Easy to use, fully assembled polypropylene laminate hood with integrated head suspension

• Includes additional neck and shoulder coverage

• Wide field of view and scratch resistant Polyethylene Terephthalate Glycol (PETG) visor

Applications: Pulp and paper, health care, battery manufacturing, refining and extraction. Suitable for applications that require neck and shoulder coverage and frequent replacement of the entire headtop assembly.

CODE 407925 S-433S Small/Medium 407924 S-433L Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10

VERSAFLO™ HEADCOVER S-333

• Easy to use, fully assembled polyurethane coated knitted nylon head cover with integrated head suspension

• Quiet to wear and made with low-linting fabric

• Wide field of view with added chemical and scratch resistance polycarbonate visor

Applications: Pharmaceutical manufacturing, powder/grain mixing, food processing and pulp and paper. Suitable for applications that require softer fabric with more drape than the S-133.

CODE 406536 Small/Medium 406535 Medium/Large 406586 Visor Cover Small - Bag 10 406587 Visor Cover Large - Bag 10

VERSAFLO™ HOOD S-655

• Head, face and neck coverage with wide field of view

• Polypropylene laminate hood with reusable head suspension cost effective choice for high hood disposal environments

• Replace soiled hood only while head suspension and air ducting is reused

• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor

• Comfortable knitted inner collar

Applications: Pulp and paper, liquid handling, battery manufacturing, health care, food and beverage.

CODE 407928 S-655 407935 Visor cover - Bag 10

RESPIRATOR SELECTION

STEP 1 CHOOSE YOUR

HEADTOP

STEP 2 CHOOSE THE APPROPRIATE

BREATHING TUBE

STEP 3 CHOOSE YOUR

AIR DELIVERY UNIT

STEP 4 CHOOSE YOUR

FILTERS AND ACCESSORIES

Page 17: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

83

H O O D S , F A C E S H I E L D S & H E L M E T SH E A D C O V E R S & H O O D S

VERSAFLO™ PAINTERS HOOD S-757

• Polypropylene laminate (double layer) hood with internal film barrier to help prevent paint contact with clothes or skin

• Reusable head suspension. Cost effective for high hood disposal environments

• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor

Applications: Paint spraying and liquid handling, automotive and marine

CODE 407932 S-757 407935 Visor Cover - Bag 10

VERSAFLO™ HELMET M-307

• Integrated respiratory, head, eye and face protection

• Coated polycarbonate visors provide added chemical and scratch resistance

• Flame resistant face seal• Optional hearing protection via

helmet-attach earmuffs• Approved to: AS/NZS 1716 Respiratory

Protection, AS/NZS 1801 as a Type 1 Industrial Safety Helmet, AS/NZS 1337.1 high impact eye protection

Applications: Construction, grinding, foundries, heavy industry, metal fabrication, recycling and processing plants.

CODE 407464 Helmet, M-307 407916 Peel off Visor - Bag 10

VERSAFLO™ HOOD S-657

• Polypropylene laminate hood with reusable head suspension cost effective choice for high hood disposal environments

• Scratch resistant Polyethylene Terephthalate Glycol (PETG) visor

• Wearers can elect to tuck the inner shroud into a shirt or protective coverall

• Excess air can be channelled over the body, providing additional comfort

Applications: Pulp and paper, health care, food and beverage.

CODE 407930 S-657 407935 Visor cover - Bag 10

VERSAFLO™ FACESHIELD M-107

• Integrated respiratory, eye, face protection• Coated polycarbonate visors provide

added chemical and scratch resistance• Flame resistant face seal• Optional hearing protection via

helmet-attach earmuffs• Approved to AS/NZS 1716

Respiratory Protection• Meets the performance standards of

AS/NZS 1337.1 for high impact eye protection.

Applications: Grinding, polishing, spraying, powder coating, chemical processing and when working with hot particles.

CODE 407463 Faceshield, M-107 407916 Peel off Visor - Bag 10

VERSAFLO™ HOOD S-855

• Sealed seam hood for liquid chemical splash environments

• Knitted inner collar• Cost effective, as just the soiled hood fabric

is replaced. Air ducting can be reused• Fabric Material: Zytron® 200• Visor Material: Coated polycarbonate with

added chemical and scratch resistance

Applications: Chemical handling, laboratory services, pharmaceutical manufacturing, pesticide application

CODE 409252 S-855

VERSAFLO™ HELMET M-400

• Integrated respiratory, head, eye and face protection with added neck and shoulder coverage

• Coated polycarbonate visor for added chemical and scratch resistance

• Approved to: AS/NZS 1716 Respiratory Protection, AS/NZS 1801 as a Type 1 Industrial Safety Helmet, AS/NZS 1337.1 high impact eye protection

• M-406: High durability shroud for construction and heavy industry work

• M-407: Flame resistant shroud for work involving sparks and hot particles

Applications: Grinding, foundries, heavy industry, metal fabrication and processing plants.

CODE 407465 Helmet, M-406 407466 Helmet, M-407 407916 Peel off Visor - Bag 10

A C C E S S O R I E S

VERSAFLO™ BT-40 BREATHING TUBE

• Heavy-duty breathing tubeMaterial: Neoprene Length: 840 mm

CODE 407898

VERSAFLO™ BT-20S & L BREATHING TUBE

• Lightweight breathing tube that comes in two lengths and is easy to wipe down

Material: Polyurethane. Length: 735-965mm

CODE 407896

VERSAFLO™ BT-30 BREATHING TUBE

• Self-adjusting length for improved fit for wearers and minimises risk of catching and snagging

Material: Polyurethane. Length: 525-850 mm

CODE 407897

Page 18: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

84

P O W E R E D & S U P P L I E D A I RP O W E R E D & S U P P L I E D A I R

VERSAFLO™ POWERED AIR PURIFYING RESPIRATOR, TR-300

• Compact & lightweight, easy-to-use, versatile powered air respirator for environments with hazardous particles

• Slim profile design is ideal for use in tight spaces

• Factory calibrated, controlled air flow at nominal 190 L/min

• Audible and visual low air flow and low battery alarms

• LED gauge on the battery pack provides an indication of charge status

• High-capacity battery runs for at least 10-12 hrs. Recharging time less than 3.5 hrs

• IP53 rated making it suitable for use in decontamination showers

• Accessories and options to suit different applications

• 3 filter choices• Meets the performance standards of

AS/NZS 1716:2003 for Respiratory Protection

CODE 408179 TR-315A Starter Kit 408192 TR-3600 Pre-filter 408193 TR-3710 P3 Filter 408194 TR-3800 P3/Nuisance Organic Vapour 408195 TR-3820 P3/HF/

Nuisance Acid Gas

POWERFLOW™ 6800 PLUS POWERED AIR RESPIRATOR

• Face mounted Powered Air Respirator with high impact eye and face protection for stripping and handling asbestos containing materials

• Easy to maintain and decontaminate• Soft, comfortable silicone faceseal• Large polycarbonate lens with wide field

of view• Smooth easy clean waist belt• Meets the performance standards of

AS/NZS 1716:2003 for Respiratory Protection• Meets the performance standards of

AS/NZS 1337.1 for high impact Eye Protection

CODE 408998 Powerflow™ 6800 Plus Powered Air Respirator 195774 P3 Particulate Filter 411386 Powerflow Air Turbo 6800DIN Medium Full Face Respirator 410345 Large Full Face Respirator

VERSAFLO™ SUPPLIED AIR REGULATOR, V-500E

• An individually-adjustable, consistently-controlled airflow regulator

• Regulator requires working pressure of 3.5-8 bar and is extremely quiet due to the integrated silencer (<65 dBA)

• Integrated warning whistle warns user of low airflow into headtop

• Spray gun or compressed air tool port• Replaceable carbon filter• Airflow: 170-305 l/min• Weight: 550g• Meets the performance standards of

AS/NZS 1716:2003 for Respiratory Protection

CODE 408180

HEATING AND COOLING AIRLINE KITS

Designed to improve comfort in environments where the ambient temperature needs either heating or cooling.• Kits include belt, air regulating valve with

muffler and breathing tube• Can be combined with approved

3M™ head tops• CEJN double action fittings• User adjustable flow rate. Continuous

flow airline system provides a high level of protection

• The air that is delivered to the 3M Airline Kits must meet the specifications of AS/NZS 1715

• Approved to AS/NZS 1716

Applications:Chemical and pharmaceutical industries, spray painting, powder coating, metal finishing.

CODE 408181 Heating Airline Kit 408182 Cooling Airline Kit

NOTE: Not to be used in areas that are oxygen deficient or in an immediately dangerous to life and health environment (IDL H).

JUPITER™ POWERED AIR PURIFYING RESPIRATOR SYSTEM

• System includes: Air Turbo with air flow check & calibration tubes, decontamination belt and breathing tube, 8-hour battery pack and battery charger, user instructions

• Audible and visual low air flow and low battery alarms

• Optional accessories include: Back pack, shoulder braces, flame retardant hose cover and heavy duty breathing tube

• Three filter types to cater for nearly all industry (dust, mist, gas and vapour) requirements

• Approved to AS/NZS 1716 for Respiratory protection

Applications: Construction, manufacturing, agriculture, pharmaceutical and chemical handling.

CODE 117877 Jupiter Turbo Kit 117886 Jupiter P3 Filter 117887 Jupiter A1P3 Filter 117888 Jupiter ABEK1P3 Filter 193356 Jupiter Pre-filter (Pack of 25)

YOU MAY ALSO BE INTERESTED IN:

GO TO PAGE

116POWERED AIR

SUPPLIED WELDING HELMETS

GO TO PAGE

61GAS DETECTORS

Page 19: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

85

P O W E R E D & S U P P L I E D A I RP O W E R E D & S U P P L I E D A I R

AIRLINE BREATHING HOSE

• 15 metre lengths with corresponding fitting to connect to Prosafe Air Purifiers

• The other end has a double action coupling designed to fit the 550468 male fitting

• Conforms to AS /NZS 1716:2003, AS 2299 and AFDA standards

• Custom lengths available on request

CODE 847011L

SARI COMBINATION KIT

The system is designed to provide air at a constant flow from 120 l/min to 300 l/min and is tested and approved to EN 139. The face piece complies to EN 140.

CODE 119458 Sari full face mask, rubber (Grey) 119431 Sari full face mask, silicone (Yellow) 119156 Kesafe connector 408550 Flow control belt

AIRVISOR MV KIT

• Disposable face skirt cassette• Foam or flame retardant skirt material available• Waistbelt with tamper-proof airflow regulator• Additional spray gun hose assembly

(only with MV Paint Kit)• Clear acetate visor (MV Paint Kit)• Polycarbonate visor (MV industrial Kit)

Applications: Environments containing particulates, gases & vapours up to 100 times the relevant exposure limit.

CODE 848912 AirVisor MV Industrial Kit 848907 AirVisor MV Paint Kit 848914 Visor Cover pkt 10

AIR PURIFIERS

Prosafe 2 Man Air Purifiers provide dry, clean air by reducing solids, hydrocarbons, oil and water vapour in compressed air systems.• Air Quality to ISO 8573-1: Class 1

(particles and oil content)• Medium: Compressed air only• Maximum operating pressure: 10 bar• Recommended comfortable breathing

temperature: 15 to 25 degrees CNOTE: These units will not remove carbon monoxide, carbon dioxide or other toxic gases or fumes.

CODE 404230 Free standing cabinet 404231 Wall mounted 550429 Replacement pre-filter 550430 Replacement main filter 550431 Replacement

carbon filter

TURBOVISOR MV

• Robust design with lightweight construction• P2 electrostatic filter supplied as standard,

odour filter optional• Wide view visor gives maximum comfort• Detachable cotton neck cover to protect hair• Tilt visor can be raised when out of the

hazard area

Applications: Suits many different applications such as asbestos and lead abatement & pharmaceutical manufacturing.

CODE 848910 Turbo Visor MV 848914 Visor Cover pkt 10

PROMASK COMBI

The Promask Combi is ideal for jobs where the user needs to disconnect the air supply while still in the contaminated area. When the air supply is disconnected, the filter takes over for escape or continued protection while walking out of the contaminated area.Certified to AS/NZS 1716:2012.

CODE 119063 Promask combination mask (Purchase with Scott Safety Flow control belt) 408550 Flow control belt

A C C E S S O R I E S

FEMALE FITTING HOSE TAIL

Female fitting of the Festo double action coupling. Hose tail end attaches to the airline breathing hose, female double action coupling end attaches to male fitting on the waist worn regulator.

CODE 550471

MALE FITTING HOSE TAIL

Male fitting of the Festo double action coupling. Hose tail end attaches to the airline breathing hose, male fitting end attaches to female double action coupling on the air purifier.

CODE 550470

FEMALE FITTING THREADED

Female fitting of the Festo double action coupling. Threaded end attaches to the air purifier, female double action fitting end attaches to male fitting on the airline breathing hose.

CODE 550469

MALE FITTING THREADED

Male fitting of the Festo double action coupling. Threaded end attaches to the waist worn regulator, male fitting end attaches to female double action coupling on the airline breathing hose.

CODE 550468

Page 20: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

86

S U P P L I E D A I R & H E A D T O P SP O W E R E D A I R & H E A D T O P S

FLOWHOOD 2 PAPR HEADTOP

Full hood manufactured from a durable PU coated nylon fabric. Shoulder cape for neck and shoulder protection. Excellent vision with low impact acetate visor. Supplied with PU hose to connect to Proflow SC 120.

CODE 406557

AUTOMASK LITEHOOD PAPR HEADTOP

The Automask with additional Litehood PVC hood provides full head and neck protection. EPDM hose to connect to Proflow SC 120 sold separately.

CODE 119124 Automask Litehood 119122 EPDM hose

AUTOMASK PAPR FACESHIELD

Lightweight multi-purpose faceshield, foam edge for increased comfort. Anti-fog cellulose acetate visor for excellent vision. EPDM hose to connect to Proflow SC 120 sold separately. Certified to AS/NZS 1716:2012.

CODE 119249 Automask 119122 EPDM hose 119099 Replacement visor 119094 Replacement harness 119250 Replacement

tightening edge

FLOWHOOD 1 PAPR HEADTOP

Ultra-lightweight half hood for increased wearer comfort and protection. Provides airflow to head and face, excellent vision with a low impact acetate visor. Supplied with PU hose to connect to Proflow SC 120. Certified to AS/NZS 1716:2012.

CODE 406556

PROFLOW SC 160

Ideal protection for use in applications such as powder coating, horticulture, pest destruction, fibreglass and manufactured fibres removal. Respirator and filters sold separately. Certified to AS/NZS 1716:2012 when sold with Scott Safety full face mask and filter.

CODE 407822 Proflow SC 160l/min 119652 Particle filter PF10 P3

PROFLOW SC 120

Ideal protection for use in applications such as powder coating, horticulture, pest destruction and fibreglass. Incorporated data-logging function for easy recording. Includes blower unit, battery, recharger, hose with DIN thread & padded belt. Respirator and filters sold separately. Certified to AS/NZS 1716:2012 when sold with Scott Safety headtop and filter.

CODE 119815 Proflow SC120l/min 119652 Particle filter PF10 P3 119601 Combination filter CF22 A1 P3 119628 Combination filter CF22 B1 P3 119539 Combination filter CF32 B1E1K1P3 411421 Combination filter

CF22 B1E1P3

PHANTOM VISION

High performance brushless motor provides reliable full-shift operation and a long service life. It has high levels of water protection and can continue operating while the wearer uses a decontamination shower. Includes medium size mask, battery, belt, charger, P3 filter, shower cover and storage case.

CODE 408917 Phantom Vision 408916 Replacement

PAPR P3 Filter

YOU MAY ALSO BE INTERESTED IN:

GO TO PAGES

78-79FILTERS

GO TO PAGE

210MANDATORY SIGNS

PROMASK PAPR FULL FACE RESPIRATOR

Complete with sweat port in chin pocket, outstanding speech diaphragm, wide sealing edge and made from Halo-Butyl elastomer compound, this full face respirator combines superior comfort and fit. Hose to connect to Proflow SC 120 sold separately.

CODE 119061 Promask 119125 Elbow hose

Page 21: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

87

S U P P L I E D A I R & H E A D T O P SP O W E R E D A I R & H E A D T O P S

PROMASK WELDING VISOR ADAPTOR

The Promask welding adaptor is a lift-up welding lens that attaches to the front of the Promask. Shade 10.

CODE 406558

FLOWHOOD 1 AIRLINE HEADTOP

Ultra-lightweight half hood for increased wearer comfort and protection. Provides airflow to head and face, excellent vision with low impact acetate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.

CODE T1

FLOWHOOD 25 AIRLINE HEADTOP

Full hood with safety helmet and integral visor. Developed to offer integrated protection in higher risk environments including demolition, toxic and hazardous materials handling and comes complete with EPDM hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.

CODE 400993

FLOWHOOD 2 AIRLINE HEADTOP

Full hood manufactured from a durable PU coated nylon fabric. Shoulder cape for neck and shoulder protection. Excellent vision with low impact acetate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.

CODE T2

FLOWHOOD 5 AIRLINE HEADTOP

Lightweight with a flip up high impact polycarbonate visor. An integrated helmet provides head protection and comes complete with EPDM hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.

CODE 406424

FCV AIRLINE REGULATOR

Waist-mounted pressure regulator for use with a medium pressure compressed airline system. Incorporates a quick fit bayonet connector for use with a range of Scott Safety Airline headtops and can be removed to allow connection to a small bore airline hose for use with the Scott Safety Promask Combi full face respirator.FEATURES:• Incorporates a CEN supply

airline hose coupling• Low-pressure warning whistle • In-line residual odour filter that removes any

residual vapours and oil• Approved for use with the T1, T2, T3, T5 and

T25 Airline headtops and Promask Combi.

Applications: Construction, Pharmaceutical, Automotive, Heavy and Light industries, Oil and Gas, Mining.

CODE 408550

IF YOU’RE WORKING IN A CONFINED SPACE, THEN YOU NEED THE RIGHT TRAINING.

FLOWHOOD 3 AIRLINE HEADTOP

Combines high impact eye and face protection in a lightweight durable PU coated nylon head covering for increased wearer comfort and protection. Comes with a Polycarbonate visor. Supplied with PU hose to connect to FCV Airline Regulator. Certified to AS/NZS 1716:2012.

CODE T3PC

Page 22: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

S C B A & E S C A P E R E S P I R A T O R S D I S P O S A B L E R E S P I R A T O R SR

ES

PIR

AT

OR

Y P

RO

TE

CT

ION

88

SCBA SCOTT SIGMA 2 T2

Approved to EN137:2006 Type 2, the Scott Sigma 2 Type 2 Self Contained Breathing Apparatus combines the highest level of respiratory protection in a simple to operate, cost effective piece of equipment that meets the needs of Industrial and Marine firefighters. Sigma 2 Type 2’s proven durability, reliability and appeal is confirmed by an extensive user base who demand a combination of maximum performance and true operational simplicity. MED approved. NOTE: Cylinder sold separately

CODE 406545 Promask PP Face Mask 411385 Sigma 2 T2 set 403000 9L Cylinder

ELSA CONSTANT FLOW ESCAPE BA

The Emergency Life Support Apparatus (ELSA) is designed for rapid escape from hazardous industrial environments.• Ten minute air supply• Unique cuboid hood with elastomeric neck

seal for easy donning and excellent visibility• Automatic activation• A constant flow of air is provided upon

opening of the ELSA bag• MED approved• 15-minute version is also available• Certified to AS/NZS 1716:2012.

CODE 402311

FLITE ESCAPE AIRLINE BA

Open circuit positive pressure airline breathing apparatus with the option of hip mounted 10 minute compressed air cylinder supply for escape from the most hazardous environments. Ideal for extended working, restricted access areas, working in confined spaces. The Flite’s robust design has been proven in some of the most arduous working environments including offshore oil and gas production. Certified to AS/NZS 1716:2012. Uses the Promask PP face mask.

CODE 406545 Promask PP Face Mask 408949 Flite Airline breathing Apparatus 408950 Flite 2L Cylinder

FENZY EMERGENCY ESCAPE KIT

The Fenzy Bio-s-cape is designed for rapid escape from hazardous industrial environments.• 15-minute air supply (ten minute version is

also available)• Automatic activation• Hood is made of waterproof and flame

retardent hi-vis material• Donning of inner mask is performed

automatically via an inflatable air cushion intergrated in the neck

• Warning whistle indicates imminent end of air reserve

• Heavy-duty PVC carry bag with quick opening through velcro closure

• MED approved and approved to AS/NZS 1716:2003

CODE 404229

FENZY ARIES SCBA SET

The Aries SCBA set gives a high level of protection and has been packaged to provide a simple and effective solution for use in industry.• Automatic positive pressure demand valve

(no first breath required)• Accepts cylinders from 4 to 9 litres• MED approved (Marine Equipment Directive)NOTE: Cylinder sold separately.

CODE 404226 SCBA set including Biomask full facepiece 404228 9L cylinder

Emergency life support apparatusAre designed for rapid escape from hazardous industrial and marine environments.

An air bottle provides 10 – 15 minutes of air to a hood that seals around the neck of the wearer allowing them to self rescue themselves from the hazardous area.

SELF RESCUE

Page 23: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

AIRWAVE® RESPIRATORS

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

S C B A & E S C A P E R E S P I R A T O R S D I S P O S A B L E R E S P I R A T O R S

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

89

P2 + NUISANCE ORGANIC VAPOURS AIRWAVE® RESPIRATOR - 4800

• Exclusive easy-breathing wave design• Less resistance, better breathability• SmartStrap allows respirator to hang

around the neck

CODE 410440 Box of 8

P2

P2 AIRWAVE® - 4600

• Exclusive easy-breathing wave design• Less resistance, better breathability• Designed to protect against mechanical

and thermally generated particulates• SmartStrap allows respirator to hang

around the neck

CODE 411307 Box of 10

P2

P2 VALVED RESPIRATOR - 2300

• P2 class filter designed to protect against mechanical and thermally generated particulates

• Exhalation valve reduces hot air build up and breathing resistance

CODE 405359 Box of 10 405187 Locker of 5

P2

P2 + NUISANCE ORGANIC VAPOURS VALVED RESPIRATOR - 2400

• Suitable for welding • Exhalation valve reduces hot air build up

and breathing resistance

CODE 405361 Bag of 10

P2 VALVED RESPIRATOR - 2315

• Premium Welding P2 class particulate filter • Exhalation valve reduces hot air build up

and breathing resistance • Adjustable straps

CODE 405360 Box of 10

P2

P2 VALVED RESPIRATOR - 2500

• P2 class particulate filter with added sorbent for nuisance levels of acid gas

• Exhalation valve reduces hot air build up and breathing resistance

CODE 405362 Bag of 10

P2

P2 AIRWAVE® RESPIRATOR - 4200

• Exclusive easy-breathing wave design• Less resistance,

better breathability

CODE 407820 Box of 10

P2 + NUISANCE ORGANIC VAPOURS VALVED RESPIRATOR - 2800

• HandyStrap allows respirator to hang around the neck

• Exhalation valve reduces hot air build up and breathing resistance

CODE 405366 Box of 10 404223 Locker of 4 with carbon

P2

P2 P2

NON VALVED RESPIRATORS

VALVED RESPIRATORS

P2 PARTICULATE RESPIRATOR - 2200

• P2 class particulate filter designed to protect against mechanical and thermally generated particulates

CODE 405358 Box of 20 405186 Respirator Locker® of 5

P2 P2

P2 FASTFIT® FLAT FOLD RESPIRATOR

• P2 class filter • Quick and easy to put on• Individually packaged for hygiene• Moulded nose bridge with soft foam nose

cushion increases comfort and seals easily without a metal noseband

CODE 407265 Box of 20

P2 HANDY STRAP RESPIRATOR - 2600

• P2 class filter designed to protect against mechanical and thermally generated particulates

• HandyStrap allows respirator to hang around the neck

CODE 405363 Box of 15

P2

P2

P2 VALVED RESPIRATOR - 2700

• P2 class filter compliance• HandyStrap allows respirator to hang

around the neck• Exhalation valve reduces hot air build up

and breathing resistance

CODE 405364 Box of 10 404223 Locker of 4

Page 24: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

90

D I S P O S A B L E R E S P I R A T O R SD I S P O S A B L E R E S P I R A T O R S

CUPPED PARTICULATE RESPIRATORS 8000 SERIES

• Lightweight construction for added comfort that may increase wearer time

• Adjustable nose clip helps reduce eyewear fogging

• Complies with AS/NZS 1716:2012

Applications: Sawing, tree lopping, grinding (P1) and composting, handling infected animals, light soldering (P2)

FLAT FOLD PARTICULATE RESPIRATORS 9300 SERIES

• Unique 3-panel design fits a wide range of face sizes

• Proprietary 3M™ Cool Flow™ valve helps to reduce heat and moisture build-up for a cooler and drier wear (9312 & 9322)

• Individually packaged for easy storage and dispensing

• Complies with AS/NZS 1716:2012

Applications: Feeding livestock, concrete cutting, earth moving (P1) and light welding, infection control, cleaning animal sheds (P2)

CUPPED PARTICULATE RESPIRATORS 8300 SERIES

• Super-soft cushioned inner lining for added worker comfort

• Robust shell construction for durability• Proprietary 3M™ Cool Flow™ valve helps

to breathe easier during prolonged wear (8312 & 8322)

• Complies with AS/NZS 1716:2012

Applications: Wood chopping, pottery/ceramics, drilling (P1) and ship building, foundries, road tunneling (P2)

CLASSIC RANGE COMFORT PLUS FLAT FOLD RANGE

COMFORT PLUS CUPPED RANGE

CODE 406269 8310 P1 Non-Valved Box of 10CODE 405571 9310 P1 Non-Valved Box of 20CODE 405569 8710 P1 Non-Valved Box of 20

P1P1 P1

CODE 406270 8312 P1 Valved Box of 10 CODE 405572 9312 P1 Valved Box of 10CODE 405570 8812 P1 Valved Box of 10

P1P1 P1

CODE 406267 8320 P2 Non-Valved Box of 10CODE 405573 9320 P2 Non-Valved Box of 20CODE 405565 8210 P2 Non-Valved Box of 20

P2P2 P2

CODE 406268 8322 P2 Valved Box of 10CODE 405574 9322 P2 Valved Box of 10CODE 405660 8822 P2 Valved Box of 10

P2P2 P2

Page 25: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

RE

SP

IRA

TO

RY

PR

OT

EC

TIO

N

91

D I S P O S A B L E R E S P I R A T O R SD I S P O S A B L E R E S P I R A T O R S

WELDING RESPIRATORS, P2

• For welding application to provide protection from ozone and welding fumes

• Low profile design allows compatibility with welding shields

• Flame retardant, cake resistant filter media reduces caking of particles on filter surfaces

• Proprietary 3M™ Cool Flow™ valve helps to remove exhaled air and minimises risk of misting eyewear

• 8514 has activated carbon layer to filter out ozone and nuisance levels* of organic vapour

• Complies with AS/NZS 1716:2012

Applications: Welding - MIG, TIG, metal fumes

SPECIALTY RESPIRATORS

P2

P2 P1

P1

PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ORGANIC VAPOUR RELIEF, P2

• Activated carbon layer reduces exposure to odours and organic vapours at levels below workplace exposure standard

• 9542A - Folded design for easy storage and dispensing. Individually wrapped to protect from contamination prior to use

• 9923V - 3M™ Cool Flow™ exhalation valve helps to reduce heat and moisture build up. Non aluminium nose clip specifically for use in flammable atmosphere e.g. underground application.

Applications: Protects against diesel particulate matter, unburned fuel vapours, welding and lead fumes

PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ACID GAS RELIEF, P1

• Robust shell maintains its shape during wear• Provides protection from nuisance levels*

of acid gases, such as, sulphur dioxide and hydrogen fluoride

• Proprietary 3M™ Cool Flow™ valve helps to reduce heat and moisture build-up in hot and humid working environment (9916)

• Complies with AS/NZS 1716:2012

Applications: Aluminium smelting, fertiliser production, chemical product and laboratories.

PARTICULATE RESPIRATORS WITH NUISANCE LEVEL* ORGANIC VAPOUR RELIEF, GP1

• Activated carbon layer provides protection against nuisance levels* of organic vapours and odours

• Type ‘G’ class rating is suitable for low vapour pressure** of many agricultural chemicals, e.g. pesticide & herbicide

• Galvanised steel nose clip allows use in flammable atmosphere e.g. underground application

• Complies with AS/NZS 1716:2012

Applications: Metal processing, foundry operations, waste disposal and recycling

Makes breathing more comfortableThe 3M™ Cool Flow™ valve is designed to release your hot, humid exhaled breath quickly, helping to prevent heat build-up inside the respirator which can be a significant cause of discomfort to wearers.

The cooler thermal imaging shades of the picture on the left indicate how the respirator fitted with the Cool Flow valve expels the breath, together with its natural heat, more rapidly. As the hot exhaled air exists through the valve, the rest of the respirator remains cooler and more comfortable.

This makes Cool Flow valved respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding.

3M™ COOL FLOW™ VALVE

COOLER < > HOTTER

Left: 3M™ Particulate Respirator 8511, N95, with the Cool Flow valve (similar to 3M 8322). Right: 3M™ Particulate Respirator 8510, N95, unvalved (similar to 3M 8320).

CODE 405577 9915 P1 Non-Valved Box of 15 CODE 409062 9542A Non-Valved Box of 25

CODE 409422 9923V P2 Valved Box of 10 CODE 405578 9916 P1 Valved Box of 10

CODE 405566 8512 P2 Valved Box of 10

CODE 405567 8514 P2 Valved Box of 10

CODE 405575 9913 GP1 Non-Valved Box of 15

CODE 405576 9913V GP1 Valved Box of 10

GP1

GP1

P2

P2

P2

AURA™ RESPIRATOR 9422+, P2

• Designed specifically for the food and beverage manufacturing industry

• No staples or small detachable parts• Highly visible and metal-detectable• Class P2 protection against dusts, mists,

smoke and fumes

CODE 410182 9422+ P2 Valved Box of 10

FOOD MANUFACTURINGMETAL DETECTABLE

*Nuisance levels are those levels below the Workplace Exposure Standard (WES)** Low vapour pressure below 1.3Pa at 25˚C

Page 26: RESPIRATORY PROTECTION - Yellow · 2018. 8. 22. · | 0800 NZSAFETY (0800 697 233) RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY PROTECTION RESPIRATORY GUIDELINES CONTINUED

www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)

R E S P I R A T O R Y P R O T E C T I O NR

ES

PIR

AT

OR

Y P

RO

TE

CT

ION

92

D I S P O S A B L E R E S P I R A T O R S

5111 & 5211

A P1 and a P2 protection full feature premium cup shape respirator suggested for use with particulate aerosols free of oil• Willtech® boomerang strip nose seal

provides better comfort• An exhalation valve for hot workplaces or

simply for easier breathing

CODE 405382 P1 Valved box of 20 405385 P2 Valved box of 20

5141

P1 protection premium cup respirator with exhalation valve and charcoal filter for organic vapour nuisance odour relief.• Willtech® boomerang nose seal provides

better wearer comfort• Has a charcoal layer, which provides relief

from nuisance levels of organic vapours and odours

CODE 405383 P1 Valved box of 20

P1 SUPERONE RESPIRATOR

• Pre formed upper part of masks ensures excellent fit & leak tightness

• Large Inner volume offers comfort and increased communication

• Crush resistant• Fits all facial profiles and sizes• Welded Straps ensure a more comfortable

respirator - no staples to scratch face

Applications: for protection against dusts and mists P1

CODE 407261 P1 Non-valved box of 20 407262 P1 Valved box of 20

5261

• P2 premium cup shape respirator• Shaped for better fit with eyewear• Low breathing resistance• Humidity resistant and hypoallergenic

filter media• Latex-free suspension straps,

no pre-stretching• Staples do not penetrate filter medium• Willtech® boomerang nose seal• Flame retardant outer shell• Exhalation valve for hot or humid workplaces• Charcoal layer provides relief from nuisance

levels of acid gases and odour relief

CODE 407821 P2 Valved box of 20

SUPERONE P2

• Pre formed upper part of masks ensures excellent fit and leak tightness

• Large Inner volume offers comfort and increased communication

• Crush resistant• Fits all facial profiles and sizes• Welded straps ensure a more comfortable

respirator - no staples to scratch face• Valve provides increased comfort in hot

and dusty work environments• Certified to AS /NZS 1716:2012

Applications: for protection against dusts, mists and fume P2

CODE 405580 P2 Non-valved box of 20 405554 P2 Non-valved pack of 5 405579 P2 Valved box of 20 405555 P2 Valved pack of 3

5251

P2 premium cup shape respirator with a high protection polo seal and charcoal layer filter for nuisance level organic vapour odour relief• Willtech® polo seal provides better

wearer comfort• Charcoal layer provides relief from

nuisance levels of organic vapours eg. ozone welding

CODE 405386 P2 Valved box of 5

P2

P2

P2

P1 P1

P1

P2