39
Revision for B TEC level 2 in safe working handling.

Revision for B TEC level 2 in safe working handling

Embed Size (px)

Citation preview

Page 1: Revision for B TEC level 2 in safe working handling

Revision for B TEC level 2 in safe working handling.

Page 2: Revision for B TEC level 2 in safe working handling

Hazard is defined as something with?

A. The ability to cause fireB. The chance to do some damageC. The potential to cause harm D. The frequency to cause deafness

Page 3: Revision for B TEC level 2 in safe working handling

Fire incidents are recorded in an accident book so that?

A. The cause can be investigatedB. The damage can be paid for C. The emergency can be calledD. The fire wardens know about them

Page 4: Revision for B TEC level 2 in safe working handling

You find a dangerous situation at work. You should?

A. Ignore it, as its not your job.B. Report it to a first aiderC. Get a ‘DANGER’ safety sign and put it upD. Report it immediately to your supervisor

Page 5: Revision for B TEC level 2 in safe working handling

Where is the best place to put up a warning safety sign?

A. In the reception areaB. In the car parkC. Near the danger areaD. Near the first aider

Page 6: Revision for B TEC level 2 in safe working handling

See the label on the container what does it warn you of?

A. Safe substance B. Flammable liquidsC. Explosive substance D. Toxic substance

Page 7: Revision for B TEC level 2 in safe working handling

Maintenance of electrical equipment should be carried out by?

A. Qualified staffB. Senior managers C. Staff using equipment D. The person who finds the damage equipment

Page 8: Revision for B TEC level 2 in safe working handling

You are not allowed to work under the influence of alcohol. Why?

A. It affects your behaviourB. It makes your breath smellC. It makes you strongerD. It makes you react quicked

Page 9: Revision for B TEC level 2 in safe working handling

A hazardous substance can cause?

A. Skin irritation B. Electrocution C. Heart diseaseD. Muscle cramps

Page 10: Revision for B TEC level 2 in safe working handling

The main hazards caused by working at height is?

A. Tiredness B. Falling objects C. Burns and scalds D. Electrocution

Page 11: Revision for B TEC level 2 in safe working handling

The purpose of risk assessments is?

A. To check the workers are working hardB. To see how if the business can make more

moneyC. To prevent harm to peopleD. To fill in lots of forms to file

Page 12: Revision for B TEC level 2 in safe working handling

what is the best definition of a hazard?

A. Something that will harm a person B. Something that will cause an evacuation C. Something with potential to cause harm D. Something that will lead to danger

Page 13: Revision for B TEC level 2 in safe working handling

A fire assembly point is?

A. An entrance for fire servicesB. A store for fire extinguishers C. A place where a fire starts D. A safe place to go in case of fires

Page 14: Revision for B TEC level 2 in safe working handling

If you suffer a mild electric shock at work from a plug. What should you do?

A. Ignore it and keep on workingB. Take the plug apart to find the problemC. Report it to your supervisor D. Give the plug a good clean

Page 15: Revision for B TEC level 2 in safe working handling

The exit doors must always be...

A. Painted blue and greenB. Made of metalC. Kept locked at all timesD. Kept free from obstructions

Page 16: Revision for B TEC level 2 in safe working handling

What additional requirements may an employee who is not very tall and works at a computer need?

A. Wrist restB. Foot restC. Eye testD. Safety shoes

Page 17: Revision for B TEC level 2 in safe working handling

Good house keeping at work is about?

A. Washing your clothes regularlyB. Keeping the floor well litC. Keeping your work place clean and tidyD. Making sure there is sufficient fresh air

Page 18: Revision for B TEC level 2 in safe working handling

You are a pedestrian in a workplace with vehicles, what would something make you noticed by drivers?

A. A green jacketB. A mobile phoneC. A large capD. A high visibility vest

Page 19: Revision for B TEC level 2 in safe working handling

What is the main risk from a machine with moving parts?

A. Hearing damageB. Entanglement C. Skin irritationD. Muscle strain

Page 20: Revision for B TEC level 2 in safe working handling

What needs to be provided at work that

A. Is very brightB. Allows you to do your job safelyC. Allows you to read from a long distanceD. Is cheap and uses little energy

Page 21: Revision for B TEC level 2 in safe working handling

A risk is

A. An assessment to first aidersB. The chance that a hazard will cause harmC. The number of accidents that happen D. The damage caused by fire

Page 22: Revision for B TEC level 2 in safe working handling

You cut yourself at work, what do you do first

A. Find the first aiderB. Write in the accident bookC. Take a break in the rest roomD. Finish what you are doing

Page 23: Revision for B TEC level 2 in safe working handling

Discovering a fire you should first

A. Find a fire extinguisher to fight the fireB. Leave the building by the nearest exitC. Find the fire warden D. Set off the fire alarm

Page 24: Revision for B TEC level 2 in safe working handling

What is the best way to make a suggestion to improve health and safety

A. Use social network sites to let everyone knowB. Discuss your suggestions with your

supervisorC. Write it in the accident bookD. Write a letter to the first aider with the

suggestion

Page 25: Revision for B TEC level 2 in safe working handling

You come across a filing cabinet with draws sticking out, what should you do?

A. Push the door inB. Ignore itC. Report it to your supervisorD. Report it in the accident book

Page 26: Revision for B TEC level 2 in safe working handling

You see a spillage of water on the floor, what should you do?

A. Report it to your supervisorB. Call the safety managerC. Put it in the accident bookD. Find the first aider

Page 27: Revision for B TEC level 2 in safe working handling

The main reasons for personal hygiene at work is

A. To prevent skin problems and infectionB. To prevent hearing problems and deafnessC. To prevent crushed hands and bleedingD. To prevent coughing and lung disease

Page 28: Revision for B TEC level 2 in safe working handling

When working with a chemical the is an irritant, what is the most likely harm that may be suffered

A. EaracheB. Back injuryC. Liver damageD. Skin damage

Page 29: Revision for B TEC level 2 in safe working handling

You are working with a power tool, what is the particular hazard that you need to be aware of?

A. Skin rashB. Electrocution C. Manual handlingD. Fall from height

Page 30: Revision for B TEC level 2 in safe working handling

Which is not a workplace hazard?

A. Excessive noiseB. Water on the floorC. Equipment D. First aid box

Page 31: Revision for B TEC level 2 in safe working handling

Risks take into account

A. How safe a workplace isB. The number of safety signsC. The probability of and eventD. What is in the first aid box

Page 32: Revision for B TEC level 2 in safe working handling

You hear a fire alarm what is the first thing you do?

A. Quickly gather your belongingsB. Leave by the nearest fire exitC. Find a fire extinguisherD. Run and tell your supervisor

Page 33: Revision for B TEC level 2 in safe working handling

Your feel you are being bullied at work, what is the best thing to do?

A. Find another jobB. Stay off workC. Tell your supervisorD. Report it in the accident book

Page 34: Revision for B TEC level 2 in safe working handling

You keep tripping on a torn piece of carpet at work. What is the best action to take to reduce risk of a trip or fall?

A. Provide some better lightingB. Get some safety shoesC. Nothing, just be carefulD. Repair the torn piece of carpet

Page 35: Revision for B TEC level 2 in safe working handling

Which of the following should you tackle yourself to reduce the risk of harm to others

A. Noisy piece of equipment B. Scaffolding the is leaningC. Smoking electrical plugD. Spill of water on the floor

Page 36: Revision for B TEC level 2 in safe working handling

Which of the following is not the responsibility of a worker

A. Reading safety instructionsB. Writing a safety policyC. Wear the right PPED. Reporting accidents

Page 37: Revision for B TEC level 2 in safe working handling

What is a main cause of slips, trips and falls in the workplace?

A. Not wearing a hard hatB. Not listening to your bossC. No wearing safety gogglesD. Not looking where you are going

Page 38: Revision for B TEC level 2 in safe working handling

What part of the body is damaged most by manual handling?

A. ArmsB. Back C. Legs D. Head

Page 39: Revision for B TEC level 2 in safe working handling

What type of sign is this?

A. Safe conditionB. WarningC. Prohibited D. Mandatory