REVISION Q SQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/sqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · 0.635mm high-speed coax cable assembly by: sqcd-xxx-xx.xx-xxx-xxx-x-x dwg

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:DECIMALS ANGLES.XX: .01[.3] 2 .XXX: .005[.13].XXXX: .0020[.051]

TOLERANCES DO NOT APPLYTO REFERENCE DIMENSIONS.

THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSINGPb

DO NOTSCALE FROM

THIS PRINT

.253 REF6.43(TYP)

* "C" REF

QCD-XX-01

QCD-XX-02

SUB-TCF-3850-25-01-XX.XX(SEE TABLE 1 FOR QTY)

SEE NOTE 7

SQCD-XXX-XX.XX-XXX-XXX-X-XNo OF POSITIONS

-025, -050, -075, -100(PER ROW)

LENGTH-XX.XX (INCHES)(01.72[43.7] MIN)

(SEE NOTE 2)(SEE NOTE 9)

-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 2)

-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN-SEU: SOCKET, EDGE MOUNT, UP-SED: SOCKET, EDGE MOUNT, DOWN (SEE TABLE 5 & SHEET 4)

-TPU: TERMINAL, PANEL MOUNT, UP-TPD: TERMINAL, PANEL MOUNT, DOWN-SPU: SOCKET, PANEL MOUNT, UP-SPD: SOCKET, PANEL MOUNT, DOWN (SEE TABLE 11 & SHEET 6)(ONLY AVAILABLE ON -025,-050, AND -075)

SECOND END

WIRING OPTION-1: PIN 1 TO PIN 1-2: PIN 1 TO PIN 2-3: PIN 1 TO PIN N-1-4: PIN 1 TO PIN N(SEE TABLE 9, SHEET 7)

-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 3)

-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN-SEU: SOCKET, EDGE MOUNT, UP-SED: SOCKET, EDGE MOUNT, DOWN (SEE TABLE 5 & SHEET 4)

-F: SCREW OPTION FIRST END ONLY (SEE NOTE 10)-S: SCREW OPTION SECOND END ONLY-B: SCREW OPTION BOTH ENDS (SEE NOTE 10)-N: NO CAPS(SEE FIG 3, SHEET 5 FOR EDGE MOUNT END OPTIONS)(SEE FIG 4, SHEET 5 FOR DOUBLE VERTICAL END OPTIONS)(SEE FIG 5, SHEET 5 FOR NO CAPS OPTION)(LEAVE BLANK FOR STANDARD CAPS BOTH ENDS)

END OPTION

HDRL-11(SEE NOTE 5)

LENGTH: XX.XX 01%

LENGTH :XX.XX + "L" REF (SEE TABLE 4)

(TYP)"A" REF

(TYP)"B" REF

'A'

N-1(SEE TABLE 3) N

(SEE TABLE 3)

N-1(SEE TABLE 3) N

(SEE TABLE 3)

SUB-SQCD-X-XXX-XX-XX


01

02

STS-01(TIGHTEN TO 1.4-1.7 IN/LBS)

(4 PLCS)

01 02

LENGTH REF

DETAIL 'A' SCALE 2.5 : 1

C

FIG 1

C3

C2

VERTICAL(SQCD-050-XX.XX-STR-STR-1 SHOWN)

* -DV END OPTIONS ONLY

FIRST END

C1

SECOND END

* REFERENCE EM FOR -TPX AND -SPX

SHEET OF

MATERIAL:

0.635mm HIGH-SPEED COAX CABLE ASSEMBLY

BY:

SQCD-XXX-XX.XX-XXX-XXX-X-XDWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

CUMMINGS 09/06/05 71

SHEET SCALE: 1:0.8

F:\DWG\MISC\MKTG\SQCD-XXX-XX.XX-XXX-XXX-X-X-MKT.SLDDRW

NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. SUB-TCF LENGTH IS EQUAL TO SQCD LENGTH. 3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED FOR SHORTS AND OPENS. 4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V. 5. TOP SUB-TCF NOT SHOWN IN THIS VIEW FOR CLARITY; HDRL-11 TO BE CENTERED ON LOWER SUB-TCF AS SHOWN; HDRL-11 IS TO CONTAIN: LINE 1- PART NUMBER "SQCD-XXX-XX.XX-XXX-XXX-X-X" LINE 2- SHOP ORDER NUMBER "XXXXXX" LINE 3- DATE CODE "XXXXX"" LINE3- DATE CODE "XXXXX" 6. PACKAGE ASSEMBLIES IN ANTI-STATIC & STATIC DISSIPATIVE BAGS. 7. TOP SURFACE OF SCREW TO BE FLUSH OR BELOW TOP SURFACE OF CAP. 8. PARTS TO BE PROCESSED PER SAMTEC ACCEPTABILITY REQUIREMENTS: HDR-PI-01 "CABLE ASSEMBLY WORKMANSHIP STANDARDS. 9. CABLE LENGTHS LONGER THAN 40.00 INCHES ARE NOT SUPPORTED BY S.I. TEST DATA.10. -F AND -B END OPTIONS NOT AVAILABLE WITH TPU, TPD, SPU, SPD ON FIRST END.11. ALL SIGNAL PINS TRANSMITTED ACROSS COAX CONDUCTOR. GROUND BLADES TIED TO COAX SHIELD. FOR MULTIPLE BANK ASSEMBLIES, EACH BANK IS GROUND INDEPENDENT OF THE OTHERS. 520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: [email protected] code: 55322

REVISION Q

-TTRT1

T25

NN-1

12

T

B

-TTL

N N-1T25

T112

B

T

1 2B1

B25NN-1

NN-1

B1

B251

2

-TBR

B

T -TBL

B

T

-STR

N-1 NT25

T12

1

B

T

-STL

2 1 T25

T1

N-1N

B

T

N-1N

B1

B252

1

2

1B1

B25N-1N

-SBR

B

T -SBL

B

T

FIRST END - VERTICAL (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:




SHEET SCALE: 1.25:1

REVISION


520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: [email protected] code: 55322

Q

-TTRT1

T25 21

NN-1

T

B

B25

B1

NN-1

21

-TBRT

B-TTL

T1

T25

12

N-1NT

B

B1

B2512

N-1N

-TBLT

B

-STR

T1

T25

21

NN-1

T

B

B25

B1

2

1

NN-1

-SBRT

B

-STL

T1

T25

N-1N

12

T

B

N-1B25

B1

N

12

-SBLT

B

SECOND END - VERTICAL (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:




SHEET SCALE: 1.25:1

REVISION



Q

"D" REF

LENGTH: XX.XX + "L" REF (SEE TABLE 4, SHEET 1)

QCD-XX-03 (TYP)

.270 6.86REF

SUB-SQCD-X-XXX-03-XX

T1

T25

-TEU

21

N-1 N

B

TB25

-TED

B121

N-1 NB

T

T1

T25

-SEU

NN-1

1 2

B

T B25

B1

-SED

NN-1

1 2

T

B

-TEU

T25

T1

N-1N

2 1

B

T

-TED

B1

B25

N-1N

2 1

T

B

-SEU

T25

T1

12

N N-1

B

T

-SED

B1

B25

12

N N-1

B

T

FIG 2EDGE MOUNT (NO CAPTIVE PANEL SCREWS)

(SQCD-025-XX.XX-TEU-STR-X SHOWN)(SAME AS FIG 1, UNLESS OTHERWISE STATED)

FIRST END - EDGE MOUNT (SEE TABLE 9, SHEET 7) SECOND END - EDGE MOUNT (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:




SHEET SCALE: 1:1

REVISION



Q

"E" REF

.500 12.70REF (TYP)

(FULLY TIGHTENED)

QCD-XX-03-CPS (TYP)

CPS-4-40-01-X

FIG 3EDGE MOUNT (WITH CAPTIVE PANEL SCREWS)

(SQCD-025-XX.XX-SEU-XXX-1-F SHOWN)(SAME AS FIG 2, UNLESS OTHERWISE STATED)

#4-40 THREADS REF

"F" REF"G"REF

"H"REF

.129 REF (TYP)3.28

.250 6.34(TYP)

QCD-XX-02-SDO

QCD-XX-01

.228 5.79REF

"J" REF

(SEE TABLE 10)"M"

(SEE TABLE 10)"K"

FIG 5(SQCD-025-XX.XX-TEU-STR-X-N SHOWN)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)


SUB-TCF-3850-25-01-XX.XXSUB-SQCD-X-XXX-03-XX

APPLY UV EPOXY TO ALL CABLE ENDSHEIGHT NOT TO EXCEED .050[1.27] ABOVE PCB SURFACE

DOUBLE VERTICAL (WITH SCREW DOWN OPTION)(SQCD-025-XX.XX-TTR-XXX-1-F SHOWN)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

FIG 4

SHEET OF


BY:


DESCRIPTION:




SHEET SCALE: 1.25:1

REVISION



Q

REF"T"

.656 16.67REF

REF"U"

SUB-QCD-XX-03-BULK (TYP)

REF"R"

REF"S"

.372 9.45REF

4-40 THDREF (TYP)

T25

T1NN-1

1 2

T

B

NN-1

1 2

T25

T1

NN-1

1 2

T

B

B25

B1NN-1

1 2 B25

B1

B

T

B

T

FIG 6PANEL MOUNT (BULK HEAD SCREW INSERTS)

(SQCD-025-XX.XX-TPU-XXX-X SHOWN)(SAME AS FIG. 2, UNLESS OTHERWISE STATED)

-SPU -SPD -TPU -TPD

FIRST END - PANEL MOUNT (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:



CUMMINGS09/06/05 76

SHEET SCALE: 1.25:1

REVISION



Q

SHEET OF


BY:SQCD-XXX-XX.XX-XXX-XXX-X-X

DWG. NO.

DESCRIPTION:




SHEET SCALE: 1.25:1

REVISION



Q

Documents

REVISION Q SQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/sqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · 0.635mm high-speed coax cable assembly by: sqcd-xxx-xx.xx-xxx-xxx-x-x dwg