REVISION Z EQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · f:\dwg\misc\mktg\eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents

$Page 1: REVISION Z EQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · f:\dwg\misc\mktg\eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents$
THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSINGPb

DO NOTSCALE FROM

THIS PRINT

.253 6.42REF (TYP)

* "C" REF

QCD-XX-01

QCD-XX-02

SEE NOTE 7

SUB-TCF-3850-20-01-XX.XX(SEE TABLE 1 FOR QTY)

"B" REF(TYP)

.775 REF19.69(TYP)

LENGTH: XX.XX + "L" REF (SEE TABLE 4)

"A" REF(TYP)

.565 14.35REF (TYP)

LENGTH: XX.XX 01%

'A'

STS-01(TIGHTEN TO 1.4-1.7 IN/LBS)

(4 PLCS)

C1

FIRST END SECOND END

01

N-1(SEE TABLE 3)

N(SEE TABLE 3)

02

N(SEE TABLE 3)

N-1(SEE TABLE 3)

01

02SUB-EQCD-X-XXX-XX-XX

SUB-EQCD-X-XXX-XX-XX

EQCD-XXX-XX.XX-XXX-XXX-X-XNo OF POSITIONS

-020, -040, -060, -080(PER ROW)

LENGTH-XX.XX (INCHES)(01.72[43.7] MIN)

(SEE NOTE 2)(SEE NOTE 9)

FIRST END

-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 2)

-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN-SEU: SOCKET, EDGE MOUNT, UP-SED: SOCKET, EDGE MOUNT, DOWN (SEE TABLE 5 & SHEET 5)

-TPU: TERMINAL, PANEL MOUNT, UP-TPD: TERMINAL, PANEL MOUNT, DOWN-SPU: SOCKET, PANEL MOUNT, UP-SPD: SOCKET, PANEL MOUNT, DOWN (SEE TABLE 10 & SHEET 5)(ONLY AVAILABLE ON -020,-040, AND -060)

SECOND END

-TTR: TERMINAL, TOP, RIGHT-TTL: TERMINAL, TOP, LEFT-TBR: TERMINAL, BOTTOM, RIGHT-TBL: TERMINAL, BOTTOM, LEFT-STR: SOCKET, TOP, RIGHT-STL: SOCKET, TOP, LEFT-SBR: SOCKET, BOTTOM, RIGHT-SBL: SOCKET, BOTTOM, LEFT (SEE TABLE 1 & SHEET 3)

-TEU: TERMINAL, EDGE MOUNT, UP-TED: TERMINAL, EDGE MOUNT, DOWN-SEU: SOCKET, EDGE MOUNT, UP-SED: SOCKET, EDGE MOUNT, DOWN (SEE TABLE 5 & SHEET 5)

END OPTION

WIRING OPTION-1: PIN 1 TO PIN 1-2: PIN 1 TO PIN 2-3: PIN 1 TO PIN N-1-4: PIN 1 TO PIN N(SEE TABLE 9, SHEET 7)

-F: SCREW OPTION FIRST END ONLY (NOT AVAILABLE WITH XPX OPTIONS)-S: SCREW OPTION SECOND END ONLY-B: SCREW OPTION BOTH ENDS (NOT AVAILABLE WITH XPX OPTIONS)-L: FIRST END RT1 OPTION (SEE NOTE 10 & 11)-R: SECOND END RT1 OPTION (SEE NOTE 10 & 11)-D: BOTH ENDS RT1 OPTION (SEE NOTE 10 & 11)-1: FIRST END SCREW OPTION, SECOND END RT1 OPTION (SEE NOTE 10 & 11)-2: FIRST END RT1 OPTION, SECOND END SCREW OPTION (SEE NOTE 10 & 11)-N: NO CAPS(LEAVE BLANK FOR STANDARD CAPS BOTH ENDS)(SEE FIG. 3, SHEET 5 FOR EDGE MOUNT END OPTIONS)(SEE FIG. 4, SHEET 5 FOR DOUBLE VERTICAL END OPTIONS)(RT1 OPTIONS NOT AVAILABLE WITH XPX OR XEX OPTIONS)(RT1 OPTIONS NOT AVAILABLE FOR 080 POSITION)(SEE SHEET 6 FOR RT1 AND NO CAP OPTIONS)

HDRL-11(SEE NOTE 5)

(TOP CABLE HIDDEN FOR CLARITY)

LENGTH REF

DETAIL 'A'SCALE 2.5 : 1

C

FIG. 1

C3

C2

VERTICAL(EQCD-040-XX.XX-STR-STR-1 SHOWN)

* -DV END OPTIONS ONLY

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:

DECIMALS ANGLES

.XX: .01 [.3] 2

.XXX: .005 [.13]

.XXXX: .0020 [.051]MATERIAL:

0.8mm HIGH-SPEED COAX CABLE ASSEMBLY

BY:

EQCD-XXX-XX.XX-XXX-XXX-X-XDWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 02/19/03 71

SHEET SCALE: 1:0.8

F:\DWG\MISC\MKTG\EQCD-XXX-XX.XX-XXX-XXX-X-X-MKT.SLDDRW

NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. SUB-TCF LENGTH IS EQUAL TO EQCD LENGTH. 3. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED FOR SHORTS AND OPENS. 4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V. 5. TOP SUB-TCF NOT SHOWN IN THIS VIEW FOR CLARITY; HDRL-11 TO BE CENTERED ON LOWER SUB-TCF AS SHOWN; HDRL-11 IS TO CONTAIN PART NUMBER, SHOP ORDER & DATE CODE. 6. PACKAGE ASSEMBLIES IN ANTI-STATIC & STATIC DISSIPATIVE BAGS. 7. TOP SURFACE OF SCREW TO BE FLUSH OR BELOW TOP SURFACE OF CAP. 8. PARTS TO BE PROCESSED PER SAMTEC ACCEPTABILITY REQUIREMENTS: HDR-PI-01 "CABLE ASSEMBLY WORKMANSHIP STANDARDS". 9. CABLE LENGTHS LONGER THAN 40.00 INCHES ARE NOT SUPPORTED BY S.I. TEST DATA.10. RT1 OPTION IS NOT AVAILABLE WITH EDGEMOUNT OR PANEL MOUNT END OPTIONS.11. RT1 OPTION IS NOT AVAILABLE WITH -080 POSITIONS.12. ALL POSITIONS ARE TRANSMITTED AS SIGNALS ACROSS COAX CENTER CONDUCTORS. CONNECTOR GROUND BLADES ARE TIED TO THE COAX SHIELD. FOR MULTIPLE BANK ASSEMBLIES, EACH BANK IS GROUND INDEPENDENT OF THE OTHERS.

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: [email protected] code: 55322

REVISION Z

-TTR

T1

T20

NN-1

12

T

B

-TTL

N N-1T20

T1

12

B

T

1 2B1

B20NN-1

NN-1

B1

B2012

-TBR

B

T -TBL

B

T

-STR

N-1N

T20

T1

21

B

T

-STL

21

T20

T1

N-1N

B

T

N-1

N

B1

B202

1

21

B1

B20

N-1N

-SBR

B

T -SBL

B

T

FIRST END - VERTICAL (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:



KEVIN B 02/19/03 72

SHEET SCALE: 1.25:1

REVISION Z



-TTR

T1

T2021

NN-1

T

B

B20

B1

NN-1

21

-TBRT

B-TTL

T1

T20

12

N-1NT

B

B1

B201

2

N-1N

-TBLT

B

-STR

T1

T20

21

NN-1T

B

B20

B1

21

NN-1

-SBRT

B

-STL

T1

T20

N-1N

12

T

B

N-1B20

B1

N

12

-SBLT

B

SECOND END - VERTICAL (SEE TABLE 9, SHEET 7)

SHEET OF


BY:


DESCRIPTION:



KEVIN B 02/19/03 73

SHEET SCALE: 1.25:1

REVISION Z



T1

T20

-TEU

21

N-1 N

B

T

B20

B1

-TED

21

N-1 N

B

T

T1

T20

-SEU

-SPU

NN-1

1 2

B

T

B20

B1

-SED

NN-1

1 2

T

B

-TEU

T20

T1

N-1N

2 1

B

T

-TED

B1

B20

N-1N

2 1

T

B

-SEU

T20

T1

12

N N-1

B

T

-SED

B1

B20

12

N N-1

T

B

FIRST END - PANEL MOUNT (SEE TABLE 9, SHEET 6)

-SPD

T

B

T1

T20N-1 N

21

B20

B1

2

NN-1

1

T

B

B

T

T20

T1

21

N-1 N

T

B

B20

B11 2

NN-1

-TPD

FIRST END - EDGE MOUNT (SEE TABLE 9, SHEET 7) SECOND END - EDGE MOUNT (SEE TABLE 9, SHEET 7)

-TPU

SHEET OF


BY:


DESCRIPTION:



KEVIN B 02/19/03 74

SHEET SCALE: 1:1

REVISION Z



"E" REF

.500 12.70REF (TYP)

(FULLY TIGHTENED)

QCD-XX-03-CPS (TYP)

CPS-4-40-01-X

FIG 3EDGE MOUNT (WITH CAPTIVE PANEL SCREWS)

(EQCD-020-XX.XX-SEU-XXX-1-F SHOWN)(SAME AS FIG. 2, UNLESS OTHERWISE STATED)

"F" REF "G"REF

"H"REF

.129 REF (TYP)3.28

.250 6.34(TYP)

QCD-XX-02-SDO

QCD-XX-01

.228 5.79REF

"N" REF

"D" REF

LENGTH: XX.XX + "L" REF (SEE TABLE 4, SHEET 1)

QCD-XX-03 (TYP)

.271 6.88REF

SUB-EQCD-X-XXX-03-XX

REF"L"

.656 16.67REF

REF"M"

SUB-QCD-XX-03-BULK

REF"J"

REF"K"

.372 9.45REF

4-40 THDREF (TYP)

DOUBLE VERTICAL (WITH SCREW DOWN OPTION)(EQCD-020-XX.XX-TTR-XXX-1-F SHOWN)

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

FIG 4

EDGE MOUNT (NO CAPTIVE PANEL SCREWS)(EQCD-020-XX.XX-TEU-STR-X SHOWN)

(SAME AS FIG. 1, UNLESS OTHERWISE STATED)

FIG 2PANEL MOUNT (BULK HEAD SCREW INSERTS)

(EQCD-020-XX.XX-TPU-XXX-X SHOWN)(SAME AS FIG. 2, UNLESS OTHERWISE STATED)

FIG 5

Z

Z

SHEET OF


BY:EQCD-XXX-XX.XX-XXX-XXX-X-X

DWG. NO.

DESCRIPTION:


KEVIN B 02/19/03 75

SHEET SCALE: 1.25:1


REVISION Z


"P" REF "S" REF

LENGTH: XX.XX + "L" REF (SEE TABLE 4, SHEET 1)

.326 8.29REF

QCD-XX-14

QCD-XX-01 QCD-XX-01

QCD-XX-14

.496 12.61REF

"V"REF

(SEE TABLE 12)"T"

(SEE TABLE 12)"U"

SUB-TCF-3850-20-01-XX.XX

SUB-EQCD-X-XXX-XX-XX

SUB-EQCD-X-XXX-03-XX

APPLY UV EPOXY TO ALL CABLE ENDS(HEIGHT NOT TO EXCEED .065[1.65] ABOVE PCB SURFACE)

FIG 6(EQCD-020-XX.X-STL-TTR-1-D SHOWN)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

FIG 7(EQCD-XXX-XX.X-XXX-XXX-X-N)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

SHEET OF


BY:EQCD-XXX-XX.XX-XXX-XXX-X-XDWG. NO.

DESCRIPTION:


KEVIN B 02/19/03 76

SHEET SCALE: 1.5:1


REVISION Z


FOR RT1 OPTION SUB ASSEMBLY ADD -RT1 TO THE END OF THE SUB ASSEMBLY CALLOUT LISTED IN THE TABLE ABOVE.

SHEET OF


BY:EQCD-XXX-XX.XX-XXX-XXX-X-X

DWG. NO.

DESCRIPTION:



KEVIN B 02/19/03 77

SHEET SCALE: 1.25:1

REVISION Z



Documents

REVISION Z EQCD-XXX-XX.XX-XXX-XXX-X-Xsuddendocs.samtec.com/prints/eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.pdf · f:\dwg\misc\mktg\eqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents