3
Roughness Measurement Technology Workpiece Measurement Roughness Measurement Roughness Measurement | Technology Mass Production

Roughness Measurement | Technology and Datasheets/Touch Probes/Roughn… · Roughness Measurement Technology Workpiece Measurement Roughness Measurement Roughness Measurement | Technology

  • Upload
    hahuong

  • View
    256

  • Download
    1

Embed Size (px)

Citation preview

Roughness Measurement Technology

Workpiece Measurement

Roughness Measurement

Roughness Measurement | Technology

Mass Production

TC63-RGTC64-RG

RC66

IF59-30-A2

+

IF59-A2

0-10V

USB

RS485-SSI

Status/Skip

TC76-RG

AD76

IF59-30-A2

0-10V

USB

RS485-SSI

Status/Skip

USB

USB

Ethernet

EthernetUSB

BLUM IPC48-20

BLUM IPC48-20

DVI

USB

TP48-21

Roughness Measurement in Machine Tools

Producing the highest quality within the shortest period of time – this is the target of a machining production. Thereby, not only the dimensional size accuracy is of vital importance, also the surface quality must fulfil the requirements. BLUM surface roughness gauges close this gap within the process chain: Thanks to the proven hardware and ingenious software, poor surfaces can be detected automatically and rapidly on the machine tool. Result: 100 % good parts and maximum productivity.

Surface roughness gauges by BLUM are specially designed for the extreme requirements of high-productive machining centres. They are coolant-resitant and IP68 rated, making them entirely suitable for machine tools.

Your benefit:

• Automated measurement without manual intervention by the operator

• Poor surfaces are already recognised in the machining centre

• No continued production of NOK-parts due to downstream, external measurement

• Recognising problems in the cutting process

• Reduced costs: > Usage of the tools until the end of service life > Less rejects

System overview: Surface Roughness Gauges

Roughness Measurement | Technology

or

System overview: Evaluation

Evaluation on machine control, visualisation on control screen

Evaluation with IPC48-20, visualisation on control screen

Evaluation with IPC48-20, visualisation on Touch Panel TP48-21

RG 2.0 Software

Software for BLUM VNC-Viewer

Software for BLUM Client-Server

NC Measuring Cycles

Siemens 840D sl/Heidenhain/Okuma

RG 2.0 Software (Linux/Windows)

Software for BLUM Client-Server

RG 2.0 Software

Software for BLUM Client-Server

Smart Link

NC Measuring Cycles

NC Measuring Cycles* If TC6X touch probe is already installed, the components IF59 and RC66 will not apply.

*

*

UTLUCLOKLCLLTL

I1

Rz2 Rz3 Rz4 Rz5

I2 I3 I4 I5

Rz1

Ra

X

Z

200-0.004

400 600 800 1000 1200 1400 1600 1800 2000 2200 24000

-0.002

0

0.002

0.004

Roughness Measurement | Technology

Blum worldwideService & Support More than 40 subsidiariesand service offices.

www.blum-novotest.com

Blum-Novotest GmbH | Kaufstrasse 14 | 88287 Gruenkraut | Germany | +49 751 6008-0 | [email protected] Production Metrology Made in Germany

© B

lum

-Nov

otes

t Gm

bH |

Ver

sion

08|

16,

Subj

ect t

o te

chni

cal c

hang

e w

ithou

t any

not

ice

Software for Roughness Measurement RG 2.0

Specially developed for the use of BLUM surface roughness gauges, BLUM RG 2.0 offers the perfect opportunity for data entry, calculation and evaluation of the roughness values, recorded in the machining centre.

Features:

• Automatic calculation of the roughness parameters

• Visualisation at the control screen or BLUM Touch Panel TP48-21

• Flexible definition of warning and tolerance limits per measuring path

• Alarm output when exceeding the warning and tolerance limits

• Immediate processing and editing of the measuring results

• Providing the tracked data in a log-file

Conformity of BLUM Roughness Measurements

Roughness measurements in machine tools are subject to more complex requirements than is the case with conventional measurements outside the machine. The measuring values, recorded by BLUM surface roughness gauges, are oriented to the generally applicable standards DIN EN ISO 4287 and ASME B46.1.

Following roughness parameters may be detected and edited:

Ra: Arithmetic average roughness value Rz: Average roughness depth Rq: Square average roughness value Rt: Total height of the profile (roughness) Rmax: Maximum roughness depth

Comparative Test

Measurement of a precision component with a conventional surface roughness gauge and the machine integrated system BLUM TC64-RG.

Conventional surface roughness gauge

BLUM TC64-RG

Roughness parameter

Conventional TC64-RG

Ra 0.63 0.59

Rz 3.95 3.85

Rmax 5.91 5.68

Result: The roughness values, defined by BLUM TC64-RG are comparable with those of a conventional, external surface roughness gauge.

Example: The parameters Ra and Rz