S324N SCALER

A Mechanical Scaler Designed with Safety as the Primary ConsiderationThe S324N Scaler from Getman performs all scaling operations quickly and efficiently while giving the operator the highest

level of safety available. The unit was designed specifically for underground scaling and can deliver up to 8165 kilograms

(18,000 pounds) of prying force to improve the effectiveness in any typical scaling process. Operator location is at the rear

of the machine far removed from potential rock falls resulting from standard scaling operations. The Getman S324N Scaler

provides one of the safest and most productive ways to scale roofs, sidewalls and faces of a mine tunnel.

(Model S320LN Scaler shown throughout)

INSTRUMENTS AND ELECTRICALFull instrumentation; engine/transmission, voltmeter, •

hour meter

Battery master disconnect switch, lockable•

140W light housings each with two (2) 70W halogen bulbs; •

4 front, 2 rear

Wiring, fully sealed connectors, sealed and oil resistant •

covering, instrument and associated switches mounted in

sealed electrical box

Two red tail lights•

Brake accumulator pressure gauges, low pressure warning •

light, 'park brake applied' warning light.

ORBITROL CONTROLLED ARTICULATED STEERINGTapered roller bearings articulation joint•

Two double-acting steering cylinders•

INDEPENDENT BRAKING SYSTEMSService, fully hydraulic wet disc brakes each axle•

Secondary, spring applied, hydraulic released wet disc •

secondary and park brake

Automatic secondary brake application upon loss of •

brake accumulator psi, engine oil psi, transmission psi or

electrical power

HYDRAULIC SYSTEMClosed center hydraulic circuits•

Piston-type hydraulic pumps•

303 liter (80 gallon) hydraulic reservoir with sight gauges•

100 mesh suction strainers•

Return line, spin-on filters, 10 micron rating•

Diagnostic test ports with quick couple parker fittings each •

axle, service brake application pressure, hydraulic pumps

AXLES AND TIRESPlanetary drive axles, Deere 1200 TMII•

12.00x24-16PR mine service tires•

FULL REVERSING POWERSHIFT TRANSMISSIONDana 32000, 3 speed•

ENGINEMercedes Benz OM904LA, 129 kW (173 hp) @ 2200 rpm •

Fuel/water separator •

Donaldson dry, dual element air cleaner•

Catalytic purifier with muffler•

24V, 100A alternator•

Auto warning, audio/visual — high temp/low psi•

227 liter (60 gallon) fuel capacity•

STANDARD EQUIPMENTAudio backup alarm, variable 87–112 dBA•

One 2.27 kilogram (5 pound) fire extinguisher•

Four nozzle fire suppression system (Ansul LTA-101-30) •

tied to engine shutdown

Beige epoxy finish paint•

Wheel chocks•

OptiONSPOWERTRAIN

Cummins QSB 4.5L, 127 kW (170 hp @ 2200 rpm)•

CHASSISFront push blade •

Ansul automatic Checkfire II fire suppression with linear •

detection loop

Lincoln automatic lubrication•

HAMMERHydraulic hammer, Okada Top 35, 336 meters per •

kilogram (500 feet per pound) class, mounting bracket

and plumbing package

SERviCES ANd SuppORtFive-year or 10,000 hour frame warranty•

Delivery, start-up and instruction•

Customized operator and maintenance training and retraining •

at factory or on-site

Machine audits and reports•

Troubleshooting support by telephone, online or on-site•

Spare parts inventory recommendations•

Repair and consumable parts kits match preventive •

maintenance schedules

SCALER fEAtuRES

Getman Corporation

59750 34th Avenue

Bangor, MI 49013 USA

Phone 1-269-427-5611

Fax 1-269-427-8781

www.getman.com

PC/RRP 0311, 10-GETM-3269Copyright © 2011 Getman Corporation

2446 mm (8' 0")

2743 mm (9' 0")

3048 mm (10' 0")

1909 mm (6' 3")292 mm

(11.5")

3400 mm (11' 2")

3128 mm (10' 3")

3465 mm (11' 4.5")

4162 mm (13' 8")

5308 mm (17' 5")

4564 mm (14' 11.5")

4877 mm (16' 0")

6096 mm (20' 0")

7315 mm (24' 0")

8086 mm (26' 6.5")

8534 mm (28' 0")

10406 mm (34' 1.5")

S324N SCALER

Functionality SpecificationsScaling

• Maximum Reach 10,135 mm (33 ft. 3 in.)

• Operational range 5486 –7925 mm (height) (18 – 26 ft.)

• Working reach 4775 mm (at 7315 mm [24 ft.] height) (15 ft. 8 in.)

• Prying Force 8165 kg (18,000 lb.)

• Hammer Class 336 m/kg (optional) (500 ft./lb.)

Machine DimensionsSteel Frame 37 mm (1.5 in.)

Weight 19,300 kg (42,549 lb.)

Overall Length 11,595 mm (38 ft.)

Cabin Height 2743 mm (9 ft.)

Wheelbase

• Length (Axle to Axle) 3404 mm (12 ft. 2 in.)

• Width 2743 mm (9 ft.)

Turning Radius

• Inner 5029 mm (16 ft. 6 in.)

• Outer 8553 mm (28 ft. 0.5 in.)

OPTIONAL EQUIPMENTHydraulic hammer, Okada Top 35 •

336 meters per kilogram (500 feet per

pound) class, mounting bracket and

plumbing package

Front push blade•

305 millimeter (1 foot) operator •

station riser, canopy height

2743 millimeters (9 feet)

Enclosed operator cabin (85 dBA) •

with ROPS/FOPS canopy, heater,

wiper and washer, air conditioner

and pressurizer

Lincoln automatic lubrication•

OPERATOR STATIONRear-mounted operator compartment •

keeping the operator as far away from

scaling operations as possible

Mechanical suspension, mid-height back •

operator seat with removable headrest

and built-in joystick mounts

ROPS/FOPS certified canopy; •

SAE J1040C, CSA B-352, ISO 3471

5 year framewarranty

OptiONSfEAtuRES

Far rear location of the operator compart-•

ment gives the operator a superior line of

sight to the working area

Operator seat, Seats Inc Magnum 200 •

Extreme Duty, fully adjustable suspension

seat with built-in joystick mounts, bolt-on

headrest and seat belt

Joysticks are magnetic induction type, •

having no mechanical gears or switches

affected by wear

Adjustable, tilt/telescopic steering column •

with orbitrol valve mounted below floor to

minimize heat and noise

Spot light, canopy mounted•

MACHINE STABILITYIt is not necessary to use stabilizers or •

the push blade to stabilize the machine

while scaling

Shock loads are transferred to the •

rubber tires instead of into the frame

and stabilizer attachment points

Emergency movements can be •

made without having to raise

stabilizers/push blade

Allows for fast setup and more •

efficient scaling (no need to take

the time to lower stabilizers)

SCALING FEATURES5486–7925 millimeter (18 – 26 foot)•

working height, rectangular section

telescopic boom, helical gear rotator,

scaling pick; max reach 10,135 millimeters

(33 feet 3 inches)

2769 millimeter (109 inch) wide •

stance front tires

Oscillating cradle lockout •

automatically activated

with scaling brake

SCALING BRAKE PACKAGEWet disc axle brakes applied with •

spring applied driveline wet disc

Axle brakes auto release when boom •

is slewed with scaling pedals

FRAME/JOINT• Tapered roller bearings in articulation

joint to deliver maximum life

• Wide joint spread to reduce

articulation component loading

• 5-year or 10,000 hour

warranty on frame

weldments

PICK ARRANGEMENT180 degree pick rotation around •

boom axis

20 degree pick roll (front to back)•

Enables efficient scaling of the roof, •

walls and face

1880 mm (6' 2")

1524 mm (5' 0")

308 mm (12")

11,595 mm (38' 0")

4477 mm (14' 8")

2410 mm (7' 11")5029 mm (16' 6")

8553 mm (28' 0.5") 30°

2743 mm (9' 0")

Standard Pick Tool

Optional Roll Back 20° Single Pick Tool

(Enclosed operator compartment shown)