Some parking is available on-site at the venue, or alternatively on the surrounding streets.

7th May, 12.30pm – 5.30pm

5.30pm – 6.30pm networking opportunity

Site Safe Wellington, 23-25 Jarden Mile, Ngauranga, Wellington

Safety in Design:

The Experience

– Transpower Timaru Busbar –

The intent of the Transpower Timaru Busbar project was to remove the unmaintainable upper busbar (current carrying conductor) and upgrade the lower bus. Because it involves working in a high voltage area which supplies Timaru City, Fonterra and Tekapo A generation, the 110 kV bus must be kept operational during the works and Minimum Approach Distance maintained at all times. Come and learn about how Safety in Design is being applied to this project to manage the hazards of working in a high voltage environment.

– Workshop Costs –

$100_ NZISM MEMBER EARLY BIRD SPECIAL. REGISTER BEFORE 7TH APRIL

$120_ NZISM MEMBER AFTER 7TH APRIL

$120_ NZISM NON MEMBER EARLY BIRD SPECIAL REGISTER BEFORE 7TH APRIL

$150_ NZISM NON MEMBER AFTER 7TH APRIL

– Guest speakers –

Kelly Hanson-White_MBIE Nathanael Sterling_Beca & NZTA

Kirsty Johns_Beca, Australia

MacKays to Peka PekaWellington Northern Corridor

1pm Welcome and Introduction Brian Holmes

1.15pm Introduction to Safety in Design Speaker: Tania Hyde, Beca

1.25pm Working Safer – changes to the Health and Safety system (TBC) Kelly Hanson-White, MBIE

1.55pm Safety in Design, the Australian Perspective

Kirsty Johns, Beca

2.15pm MacKay’s to Peka Peka Expressway Nathanael Sterling, Beca, & NZTA

2.35pm Setting the Scene / Overview of the Safety in Design Process Tania Hyde, Beca

2.55pm BREAK

3.15pm Workshop All

4.30pm Feedback Groups

5.00pm Lessons Learnt and Questions Tania Hyde, Beca

5.20pm Wrap up and close Brian Holmes

5.30pm onwards NETWORKING EVENT

Safety in Design:Training Day Agenda

Speaker Bios and Presentation Overviews

Speaker: Brian Holmes – MIIRSM, GradNZISM Company: Branch Manager, Wellington NZISM Timeslot: 1pm, 5.20pm

Brian will open the seminar with a welcome to the group and introduce the MC and afternoons events.

MC: Lauren Prestney – Communications Manager, Site Safe NZ Inc

Speaker: Nathanael Sterling, Senior Project Manager – BCPEng, MIPENZ, PMP Company: Beca Timeslot: 2:15pm

Nathanael has 18 years of experience in civil infrastructure projects, initially working in a contractor organisation as a project manager in construction, then later working in Capital Works in local government and recently as a Consultant. Within Beca, Nathanael has been actively involved in Safety in Design committees, as a Health and Safety Representative and has facilitated a number of Safety in Design workshops. Based on site at the Mackays to Peka Peka Alliance he facilitated the Safety in Design Workshops and established the Safety in Design process for the design phase of the project.

Nathanael and an NZTA representative will be presenting on behalf of the MacKays to Peka Peka Alliance.

Speaker: Kirsty Johns – Associate, Water – BEng CEng MIChemE MIEAust Company: Beca Timeslot: 1:55pm

Kirsty has 15 years of engineering experience in the water sector and is the Australian Safety in Design Champion for Beca. Kirsty came to Australia from the UK 8 years ago, with experience in construction and consultancy, and in working under the UK Construction Design Management (CDM) regulations. She worked with others in Beca to establish a Safety in Design procedure to comply with the recently introduced Victorian regulatory requirements, rolling these out to cover all of Beca Australia. She developed training sessions to cover both introductions to Safety in Design, and how to facilitate a safety in design workshop, providing these trainings in Australia before working with the New Zealand business to add to and roll out the safety in design training with them. Kirsty has worked on safety in design on numerous projects including the Victorian Desalination Project and Melbourne Water’s STaPS alliance, along with projects in the airports, infrastructure, food and beverage and power sectors.

Kirsty will be talking about how Safety in Design legislation has impacted on work in Australia, giving some examples of lessons learnt and discussing specific projects.

Tania Hyde – Senior Roading Engineer – CEng MICE, CPEng MIPENZ Company: Beca Timeslot: 1:15pm, 2:35pm and 5:00pm

Tania has 13 years of civil engineering experience and is one of the lead Safety in Design Champions for Beca. She used her knowledge and experience of the UK Construction Design Management (CDM) Regulations to facilitate the production of the Beca company Work Instruction and training modules. She also facilitated the production of the SCIRT Safety in Design strategy. She has worked with ACENZ and NZTA to produce a Minimum Standard Z Clause, guidance notes and training material. Tania has facilitated many Safety in Design workshops including MacKays to PEka Peka and the Upper Harbour Highway to Greville Improvements.

Speaker: Kelly Hanson-White, Principal Policy Advisor Company: Ministry of Business, Innovation and Employment Timeslot: 1:25pm

Kelly is part of a team currently immersed in giving effect to the Government’s decision to introduce a new legislative framework for workplace health and safety. She will be presenting on the proposed regulations under the proposed new Health and Safety at Work Act and will explain some of the content of the proposed regulations and what that may mean to the audience.

Registration Form:

Registration Form: Please complete registration details below & return by 7th April 2014 for the Early Bird registration

or no later than 6th May.

Lunch will be served on arrival from 12.30 until 1pm, afternoon tea and post event networking drinks included in cost.

Post to: The Secretary, NZISM Wellington Branch, PO Box 4046, Wellington

Or email to: well.nzism@gmail.com

Names of those attending: Please complete clearly as details will be used for attendance certificate.

Name  (Main  Contact)   Name  Company   Company  Email   Email  Phone   Phone  Name   Name  Company   Company  Email   Email  Phone   Phone  Registration  Type   Quantity   Total  NZISM Member Early Bird Special. Register before 7th April 14 - $100pp NZISM NON Member Early Bird Special Register before 7th April 14 - $120pp NZISM Member After 7th April 14 - $120pp NZISM NON Member After 7th April 14 - $150pp Total to be paid by method below Payment method (please select from the options below) Direct credit (to be received within 5 days of registration to confirm place) <Bank Acct – 03-0351-0494150-00 > please use your name/company name as a reference. Cheque enclosed (Payable to NZISM Wellington) NZISM secretary, PO Box 4046, Wellington) Receipt required? If yes, what email address would you like it sent to? YES  /  NO  

Upon payment this notice may be regarded as an invoice. NZISM Wellington Branch is not GST Registered.