Embed Size (px)
Citation preview
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 1
INTRODUCTION TO FMC SOLUTIONS Located in Northville, Michigan, FMC was created to provide you, the customer, a strategic resource that understands your mission. FMC is comprised of U.S. Army Aviation Veterans who know your challenges, and the OPTEMPO you are expected to execute.
Our objective is to provide and support A-L Model Blackhawk Helicopters globally where permitted by the U.S. State Department. FMC has formed partnerships with fourteen U.S. companies, as well as government entities, to provide you with a total solution in purchasing and sustaining A-L Model Blackhawk Helicopters.
BLACKHAWK HELICOPTER SALES AND SUPPORT PROGRAM
SALES AND SUSTAINMENT OF BLACKHAWK HELICOPTERS The Blackhawk (UH-60) is a twin turbine engine, single rotor, modular fuselage, rotary wing helicopter.
The main rotor system has four rotor blades. The drive train consists of a main transmission, intermediate gear box, and tail rotor gear box with interconnecting shafts. The non-retractable landing gear consists of the main landing gear and a tail wheel. The aircraft has redundancy for Hydraulic, Electrical and Pneumatic systems.
• Maximum Forward Airspeed: 193 Knots Wet Weight, 165 Knots at 22,000 lbs
• Maximum Lift Weight: 22,000 lbs • Maximum Sling Load Weight: 8000 lbs • Maximum Performance Vertical Take-Off: 2000 ft per minute • 274 mi or 441 km on one tank of fuel (361 gal)
The FMC Advantage
The FMC team can support you for the life of your aircraft. In addition to receiving a Blackhawk in the configuration to meet your needs, you get the support of these FMC Programs to sustain the aircraft and maintain your readiness rate:
• Integrated Logistics Support (ILS) • Ground Support Equipment (GSE) • Tooling • Publications with Revision
Management
• Hangars and Facilities • Support Personnel • Pilot Training • Maintenance Training
WE ARE WITH YOU EVERY STEP OF THE WAY
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 2
FMC Solutions is backed by dedicated partners who, together, provide you with a Blackhawk equipped for your needs and a sustainment package to maintain your flight operations.
AIR WORTHINESS AUTHORITY
FMC-Solutions
ARMES Aviation Armour of America Breeze-Eastern CCAD
Contact Aviation Farren International FN Herstal FLIR
FSB Genesys Aerosystems Hawk Enterprises Robertson Fuel Systems
Snap-on Tools SPITFIRE Solutions Testek, Inc.
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 3
The first step in defining your Blackhawk helicopter is identifying which Air Worthiness Authority you will be operating under.
ARMY AIR WORTHINESS AUTHORITY The Blackhawk helicopters provided by FMC Solutions were maintained under the U.S. Army’s Airworthiness Authority. Your country or federal authority may accept the transition from the U.S. Army Air Worthiness Authority, or require the aircraft to transition to the FAA Authority prior to delivery.
FEDERAL AVIATION ADMINISTRATION (FAA) A restricted Type Certificate (TC) can be applied for along with Supplemental Type Certificates (STC) for each modification. The certifications are applied for and approved by the FAA individually.
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 4
AVAILABLE MODIFICATIONS TO MEET YOUR NEEDS FMC offers a variety of modifications to tailor your Blackhawk for every aspect of your mission.
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 5
MILITARY OR COMMERCIAL PAINT APPLICATION The second step in defining your Blackhawk helicopter is identifying whether the helicopter will have a military or commercial application.
For military applications, FMC can apply a paint color and design that matches your current military aircraft profile or retain the original paint color.
The original aircraft paint, Chemical Agent Resistant Coating (CARC), is a two-component polyurethane paint (MIL-C-46168) that has been used as a finishing coat on military combat equipment since 1985.
Our design team will create a digital design based on your sketch or construct a digital design with you. Once a digital design is customer approved, it is released for painting.
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 6
AIRCRAFT SUSTAINMENT: KEEP YOUR HAWK FLYING At FMC Solutions, we know that keeping your aircraft flying is the top priority. Downtime must be minimized. That is why we offer a complete support system from tip-to-tail.
INTEGRATED LOGISTICS SUPPORT (ILS) An aircraft’s extended downtime is frequently due to Tech Supply. Our team of Blackhawk Tech Supply veterans will ensure your repairable LRUs and consumable piece parts are managed to the minimum/maximum rate that meets your flight schedule and mission profile. We do not have the mindset of a commercial entity—we are led and operate as a military support battalion. We understand the mission and we know what spares need to be stocked to maintain an FMC status.
Available ILS Programs
Annual PricingBasic Ordering Agreement (BOA)
Performance Based Logistic(PBL) Program
Tip-to-TailPower by the Hour
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 7
AIRCRAFT SUSTAINMENT: KEEP YOUR HAWK FLYING
GROUND SUPPORT EQUIPMENT (GSE)
Level of Maintenance GSE Support
AVUM Aviation Unit Maintenance Flight-line, hangar maintenance
AVIM Aviation Intermediate Maintenance Back-shops
Depot Material maintenance or repair requiring the overhaul, upgrading or rebuilding of parts, assemblies or subassemblies, and the testing and reclamation of equipment as necessary
MRO or OEM repair, overhaul, and test
TOOLING FMC has Snap-on tool kits that are designed to support the UH-60 technicians at the -10, -20, and -30 level of maintenance. The -20 and -30 tool kits are repair shop-specific.
With Snap-on, FMC has several solutions that can be customized to provide the best in quality for your budget.
PUBLICATIONS Electronic maintenance manuals applicable to your aircraft are available. Maintenance tasks for equipment that is no longer installed on the aircraft will be removed and maintenance tasks related to new equipment and/or modifications will be added.
FMC will sustain your manuals with revision updates.
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 8
AIRCRAFT SUSTAINMENT: KEEP YOUR HAWK FLYING
HANGARS AND FACILITIES FMC is pleased to have the Frankfurt-Short-Bruza (F+S+B) Architect Firm as a part of our team. F+S+B has designed rotor-wing repair facilities for the U.S. Military in multiple locations. When it comes to facilities, pictures speak louder than words.
FMC and F+S+B will provide a facility that designed around work flow to create your new base of operations.
SUPPORT PERSONNEL FMC has Maintenance Field Teams available to meet your needs in:
• -10 level daily maintenance; scheduled and unscheduled
• -20 level Back-shop support, phase support, and LRU testing
• -30 Depot level support, LRU repairs and overhauls, and aircraft modifications
• Maintenance Management • Maintenance Test Pilots • Technical Inspectors • Support Personnel, including Flight Ops, Supply
Chain, ALSE
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 9
AIRCRAFT SUSTAINMENT: KEEP YOUR HAWK FLYING
PILOT TRAINING FMC develops and implements a Program of Instruction (POI) which covers multi-engine rotary wing Blackhawk flight training based on the students’ current skill level and the required proficiency upon completion.
Pilot training is available for:
• Transition from other aircraft • Mission Courses
• Air Assault • Train-the-trainer
MAINTENANCE TRAINING Maintenance/Quality Control
FMC’s overall maintenance training program objective is to prepare technicians to perform repairs and inspections on the UH-60 based on established criteria, equipment, tooling, and materials, as specified in the applicable T.O.
Training is provided in ATA 104 Standards through:
• Classroom training • Hands-on training • Video training
Available Courses
Blackhawk Maintenance Training
Course Length (Wks) Max. Head Count
UH-60A/L SYSTEMS FAMILIARIZATION COURSE 1 15
UH-60A/L SYSTEMS FAMILIARIZATION STAFF COURSE <1 15
FLIGHT CONTROL RIGGING COURSE 1 10
HYDRAULIC SYSTEM COURSE 1 10
UH-60 TECHNICAL INSPECTORS (TI) COURSE 2 10
UH-60 A/L AUTOMATIC FLIGHT CONTROL SYSTEM (AFCS) COURSE 2 10
UH-60A/L AVIONICS COURSE 1 10
UH-60A/L ELECTRICAL SYSTEMS COURSE 2 10
UH-60A/L PHASE MAINTENANCE INSPECTION (PMI) COURSE 1 10
T700 TURBINE ENGINE FAMILIARIZATION COURSE 1 10
ULLS-A (E) CUSTOMIZED TECHNICAL SUPPORT AND TRAINING COURSE Varies on need 10
AIRCRAFT FMC SOLUTIONS, L.L.C. PROPRIETARY RIGHTS NOTICE — This document contains proprietary information of AIRCRAFT FMC SOLUTIONS, L.L.C. You may not copy or disclose this document or any information in it for any purpose without express written permission. Possession, use, copying or disclosure by anyone without express written permission of AIRCRAFT FMC SOLUTIONS, L.L.C. is not authorized and may result in criminal and/or civil liability. Page 10
READY TO FLY?
The next step is to learn more about what FMC has to offer you. To request more information, contact us and we will send you our complete catalog that outlines each aspect of the program and detailed supporting information.
Email:
Stan Aaron [email protected]
Mail:
Aircraft FMC-Solutions 143 Cady Centre, Ste. 227 Northville, Michigan 48167
