Samsung Syncmaster 930bf Chassis Bi17ds Bi19ds Ls17 19bidks Sm

SERVICE Manual

LCD Monitor Fashion Feature

LCD-MonitorChassis Model CodeBI17DS LS17BIDKSV/EDCBI19DS LS19BIDKSV/EDC

- Lustrous/Colorful Appearance (Design)

- Integrated UI applied

- Built-in Scaler Sync Separator

- 4ms Response Time

- Connectivity : Analog (15p Dsub),

Dual (24p DVI-D)

- Power Consumption : 17"(34W), 19"(38W)

- DPMS : under 1 W (230Vac)

Samsung Electronics Co.,Ltd.416, Maetan-3Dong, Yeongtong-Gu, Suwon City,Gyeonggi-Do, Korea, 443-742Printed in KoreaP/N : BN82-00133B-00URL : http://itself.sec.samsung.co.kr/

-This Service Manual is a property of Samsung Electronics Co., Ltd. Any unauthorized use of Manual can be punishedunder applicable International and/or domestic law.

13 Circuit Descriptions

13-1

13 Circuit Descriptions13-1 Overall Block Structure

13-1-1 Power Tree

1. When the AD board is in DPMS state:1.1 The IP has been designed so that it operates with a power consumption of less than 0.6W of.1.2 The Scaler consumes power up to 28mA1.3 The power to the panel is switched off 1.4 The MCU consumes power up to 28mA.

--> The total current consumption to the DPMS is less then 60mAand the total power consumption is 0.6W + 5V*60mA = 0.9W so that the total power consumption isless than 1W.

2. When the AD board is operating normally:2.1 The maximum power consumption of the panel lamps is described below (It may vary depending on

the panel manufacturer) 17" : 4*(7.5mA*650mVrms)=4*4.9=19.6W19: : 4*(7.5mA*720mVrms)=4*5.4=21.6W

2.2 The power consumption of the Panel Control board is as follows: 5V*720mA=3.6W2.3 The power consumption of the Scaler is as follows: 3.3V*223mA + 1.8V*221mA = 1.13W2.4 The power consumption of the MCU is as follows: 5V*44mA =0.22W


13-2

13-1-2 Main Board Parts

1. Inverter: A conversion device that converts DCrated voltage/current to high ones necessaryfor the panel lamp.

2. DC/DC(Regulator): General term for DC to DCconverting devices. The IP board receives 5V and outputs 1.8 or3.3V that is supplied to the scaler (SE59AWJ).

3. Power MosFET: The IP board receives 5V andoutputs a lower voltage in DPMS mode andsupplies the whole 5V for the panel operatingboard in normal conditions. In that case, theswitching of Power MosFET is controlled byMicom.

4. Scaler: Receives the digital TMDS and analogR,G,B signals and convert them to proper reso-lutions using up- or down- scaling that aretransferred to the panel in the TTL formats.

5. Crystal(Oscillator): Use one 24MHz oscillatorexternally to supply power to both MCU andScaler at the same time.

6. MCU & EEPROM: I2C is a two-way serial bus oftwo lines that supports communications acrossthe integrated circuits as well as between MCU,Scaler and EEPROM. In particular, MCU and Scaler (SE59AWJ) usethe DDR direct bus for mutual communications,which is an effective, speedy system because itallows 4 additional address/data lines com-pared to the old serial systems.

7. Function Key: A certain keystroke generates acertain electrical potential, which is transferredinto ADC input port of the MCU and then con-verted to a digital value by the A/D converter ofthe chip. The digital value (data) is a clue towhich key is entered. In practical, the voltagelevels are set as below.


13-3

13-1-3 IP BOARD BLOCK(POWER) Parts

13-1-4 IP BOARD BLOCK( INVERTER ) Parts

DDC InInputput

+ 1+ 13Vdcdc

IP BOARDBOARD

BLOCKBLOCK ( IN VN VERTERERTER )

+ 5+ 5VdVdc

ADIMIM + 3.3.3Vdc

BDIMIM + 4.5V.5Vdc

IN VERTVERTERER PARTPART

COCON TROROL PART

POWERDC INPUT

ON/OFFDIM INPUT

FULLBRIDGECIRCUIT

INVERTERCONTROLICDRIVERIC

FEED BACKCIRCUIT

PROTECTIONCIRCUIT

Lamp

Lamp

Lamp

Lamp


13-4

13-1-5 IP BOARD ( inverter ) PROTECTION Parts

Figure 1.

Figure 2.

BIZET INVERTER CONTROLER FAN7310 have 2-way of the PROTECTION MODE.

1. OVP[Over Voltage Protection] : If the Voltage of the series capacitors C10 & C15 is over the 2.0V, the Inverter latched-off.[See the Picture1]

2. OLP[Over Load Protection] : If the inverter output harness is opened(No-output current), the base of theQ1 turns on and chage the C9 ovter 2V and then, the Inverter latched-off[See the Picture2]


13-5

13-2 Trouble Shooting

13-2-1 IP BOARD(Power)

Check fuse Change FUSE

Yes

No

3 pin of FDM0565RVcc system in normal: HIGH Check the Vcc system

Yes

No

1 pin of FDM0565RCheck the drain system

Normal: Switching

Check the output current

Check the main switching

Check othersHarness, Inlet

Power On

No

Check the feedback system

NoCheck the protection system

No

Yes

Yes


13-6

13-2-1 IP BOARD(Inverter)

Check the power system

Yes

No

1 and 2 pins of FDM0565RCheck Protection

Normal:0.6V~0.8V

Check the IC driveCheck MOSFET

Yes

No


Normal:0.6V~0.8V


Check the OVP and OLRcircuits

Check others

Power On

No


NoCheck any dimming circuit

No

Yes

Yes


13-7

13-3 IP BOARD(Power) Schematic Diagrams


13-8

13-4 IP BOARD(Inverter) Schematic Diagrams

7 Block Diagrams

7-1

7 Block Diagram

7-1 Power Tree

7 Block Diagrams

7-2

7-2 Main Board Part

7-3 IP Board Part (SMPS Part)

7 Block Diagrams

7-3

7-4 IP Board Part (Inverter Part)

7 Block Diagrams

7-4


13-1

13 Circuit Descriptions13-1 Overall Block Structure

13-1-1 Power Tree

1. When the AD board is in DPMS state:1.1 The IP has been designed so that it operates with a power consumption of less than 0.6W of.1.2 The Scaler consumes power up to 28mA1.3 The power to the panel is switched off 1.4 The MCU consumes power up to 28mA.

--> The total current consumption to the DPMS is less then 60mAand the total power consumption is 0.6W + 5V*60mA = 0.9W so that the total power consumption isless than 1W.

2. When the AD board is operating normally:2.1 The maximum power consumption of the panel lamps is described below (It may vary depending on

the panel manufacturer) 17" : 4*(7.5mA*650mVrms)=4*4.9=19.6W19: : 4*(7.5mA*720mVrms)=4*5.4=21.6W

2.2 The power consumption of the Panel Control board is as follows: 5V*720mA=3.6W2.3 The power consumption of the Scaler is as follows: 3.3V*223mA + 1.8V*221mA = 1.13W2.4 The power consumption of the MCU is as follows: 5V*44mA =0.22W


13-2

13-1-2 Main Board Parts

1. Inverter: A conversion device that converts DCrated voltage/current to high ones necessaryfor the panel lamp.

2. DC/DC(Regulator): General term for DC to DCconverting devices. The IP board receives 5V and outputs 1.8 or3.3V that is supplied to the scaler (SE59AWJ).

3. Power MosFET: The IP board receives 5V andoutputs a lower voltage in DPMS mode andsupplies the whole 5V for the panel operatingboard in normal conditions. In that case, theswitching of Power MosFET is controlled byMicom.

4. Scaler: Receives the digital TMDS and analogR,G,B signals and convert them to proper reso-lutions using up- or down- scaling that aretransferred to the panel in the TTL formats.

5. Crystal(Oscillator): Use one 24MHz oscillatorexternally to supply power to both MCU andScaler at the same time.

6. MCU & EEPROM: I2C is a two-way serial bus oftwo lines that supports communications acrossthe integrated circuits as well as between MCU,Scaler and EEPROM. In particular, MCU and Scaler (SE59AWJ) usethe DDR direct bus for mutual communications,which is an effective, speedy system because itallows 4 additional address/data lines com-pared to the old serial systems.

7. Function Key: A certain keystroke generates acertain electrical potential, which is transferredinto ADC input port of the MCU and then con-verted to a digital value by the A/D converter ofthe chip. The digital value (data) is a clue towhich key is entered. In practical, the voltagelevels are set as below.


13-3

13-1-3 IP BOARD BLOCK(POWER) Parts

13-1-4 IP BOARD BLOCK( INVERTER ) Parts

DDC InInputput

+ 1+ 13Vdcdc

IP BOARDBOARD

BLOCKBLOCK ( IN VN VERTERERTER )

+ 5+ 5VdVdc

ADIMIM + 3.3.3Vdc

BDIMIM + 4.5V.5Vdc

IN VERTVERTERER PARTPART

COCON TROROL PART

POWERDC INPUT

ON/OFFDIM INPUT

FULLBRIDGECIRCUIT

INVERTERCONTROLICDRIVERIC

FEED BACKCIRCUIT

PROTECTIONCIRCUIT

Lamp

Lamp

Lamp

Lamp


13-4

13-1-5 IP BOARD ( inverter ) PROTECTION Parts

Figure 1.

Figure 2.

BIZET INVERTER CONTROLER FAN7310 have 2-way of the PROTECTION MODE.

1. OVP[Over Voltage Protection] : If the Voltage of the series capacitors C10 & C15 is over the 2.0V, the Inverter latched-off.[See the Picture1]

2. OLP[Over Load Protection] : If the inverter output harness is opened(No-output current), the base of theQ1 turns on and chage the C9 ovter 2V and then, the Inverter latched-off[See the Picture2]


13-5

13-2 Trouble Shooting

13-2-1 IP BOARD(Power)

Check fuse Change FUSE

Yes

No

3 pin of FDM0565RVcc system in normal: HIGH Check the Vcc system

Yes

No

1 pin of FDM0565RCheck the drain system

Normal: Switching


Check the main switching

Check othersHarness, Inlet

Power On

No


NoCheck the protection system

No

Yes

Yes


13-6

13-2-1 IP BOARD(Inverter)

Check the power system

Yes

No


Normal:0.6V~0.8V

Check the IC driveCheck MOSFET

Yes

No


Normal:0.6V~0.8V


Check the OVP and OLRcircuits

Check others

Power On

No


NoCheck any dimming circuit

No

Yes

Yes


13-7

13-3 IP BOARD(Power) Schematic Diagrams


13-8

13-4 IP BOARD(Inverter) Schematic Diagrams

11 Disassembly and Reassembly

11-1

11 Disassembly and ReassemblyThis section of the service manual describes the disassembly and reassembly procedures for theBI17DS/BI19DS TFT-LCD monitors.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handlingthese components.

11-1 DisassemblyCautions: 1. Disconnect the monitor from the power source before disassembly.

1. Remove 5 screws and remove stand.

2. Remove 1 screw and lift up the rear cover.


11-2

3. Use the jig to remove the shield lamp.Note: Be careful not to hurt your fingers when you remove the lamp.

4. Place the ass'y on the one hand and remove the LVDS cable by the other hand. Then, loosen the 4 screws.

5. Remove screw, and seperate Main PBA.


11-3

11-2 Reassembly

Reassembly procedures are in the reverse order of disassembly procedures.

6. Lift up the Panel.

Memo


11-4

6 Electrical Parts ListYou can search for updated part codes through ITSELF web site.

URL : http://itself.sec.samsung.co.kr/

6-1 BI17DS Main PCB Parts

6 Electrical Parts List

6-1

Level Loc. No. Code No. Description & Specification Q'ty SA/SNA

0 LS17BIDKSV/EDC 730BF,SGT6/S17A0-LBI,17,LCD-MO,NETHERLAN 0 SA

..2 M0014 BN94-00723F ASSY PCB MAIN-STZ;LS17BID*,W/W 1 SA

...3 T0245 0202-001366 SOLDER-WIRE FLUX;-,RS60S,D1.2,63Sn/37Pb, 0.01 SNA

...3 CN102 3701-001173 CONNECTOR-DVI;24P,3R,FEMALE,ANGLE,AUF 1 SA

...3 CN101 3701-001219 CONNECTOR-DSUB;15P,3R,FEMALE,ANGLE,AUF 1 SA

...3 CN906 3711-005884 CONNECTOR-HEADER;BOX,30P,2R,2mm,ANGLE,SN 1 SA

...3 T0174 BN97-00580S ASSY SMD;LS17BID* 1 SNA

....4 CIS5 0202-001375 SOLDER-CREAM;RMA-20-21L,S63,-,Sn63/Pb36. 1.51 SNA

....4 ZD100 0403-001411 DIODE-ZENER;-,5.49-5.73V,200MW,SOD-323,T 1 SA





....4 D103 0406-001061 DIODE-TVS;MMQA5V6T3,5.32/5.6/5.88V,24W,S 1 SA



....4 D101 0406-001181 DIODE-TVS;NUP4201MR6,6/-/-V,500W,TSOP-6 1 SA



....4 Q201 0501-000342 TR-SMALL SIGNAL;KSC1623-Y,NPN,200mW,SOT- 1 SA




....4 Q409 0505-001170 FET-SILICON;SI9933ADY-T1,P,-20V,3.4A,0.0 1 SA

....4 IC109 1003-001538 IC-LCD CONTROLLER;S5D2542X,LQFP,208P,28X 1 SA

....4 IC109 1003-001789 IC-LCD CONTROLLER;SE59AWJ-LF,PQFP,128P,2 1 SA

....4 IC112 1103-000129 IC-EEPROM;24C02,256x8,SOP,8P,5x4mm,4.5/5 1 SA

....4 IC112 1103-001023 IC-EEPROM;24C08,1Kx8,SOP,8P,5x4mm,2.5/5. 1 SA

....4 T0087 1203-003696 IC-POSI.FIXED REG.;NCP1117DT18T5G,DPAK,3 1 SA


....4 IC120 1205-002412 IC-TRANSMITTER;DTC34LM85A,TSSOP,56P,14x6 1 SA


....4 R708 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R709 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R710 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R711 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R712 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R713 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R701 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R702 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R704 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R705 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R706 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R721 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R722 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R121 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R123 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R402 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R107 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R109 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R200 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R201 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R217 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R219 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R220 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R228 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R229 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R231 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R232 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R233 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R234 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R235 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R236 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R237 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R238 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R239 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R240 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R241 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R242 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R252 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R221 2007-000077 R-CHIP;470ohm,5%,1/10W,TP,1608 1 SA

....4 R101 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 1 SA


6-2




....4 R251 2007-000082 R-CHIP;3.3Kohm,5%,1/10W,TP,1608 1 SA





































....4 R707 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R723 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R724 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R725 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R726 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R401 2007-000118 R-CHIP;390ohm,5%,1/10W,TP,1608 1 SA

....4 R102 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R106 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R110 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R111 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R112 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R114 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R122 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R124 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R127 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R128 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R129 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R130 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R131 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R132 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R125 2007-000821 R-CHIP;390ohm,1%,1/10W,TP,1608 1 SA

....4 R117 2007-001002 R-CHIP;510ohm,5%,1/10W,TP,1608 1 SA

....4 R103 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R108 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R126 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R410 2007-002899 R-CHIP;10ohm,1%,1/10W,TP,1608 1 SA

....4 R411 2007-002899 R-CHIP;10ohm,1%,1/10W,TP,1608 1 SA

....4 C424 2203-000041 C-CER,CHIP;0.01NF,0.25PF,50V,C0G,TP,1608 1 SA


....4 C210 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,TP,1608 1 SA








































....4 C118 2203-000236 C-CER,CHIP;0.1nF,5%,50V,C0G,1608 1 SA

....4 C211 2203-000257 C-CER,CHIP;10nF,10%,50V,X7R,1608 1 SA





....4 C114 2203-000998 C-CER,CHIP;0.047NF,5%,50V,C0G,TP,1608 1 SA








































....4 C621 2203-005065 C-CER,CHIP;1000nF,+80-20%,10V,Y5V,1608 1 SA













6-3



6-4





....4 C611 2402-001042 C-AL,SMD;100uF,20%,16V,GP,TP,6.6x6.6x5.4 1 SA





....4 X400 2801-003773 CRYSTAL-SMD;12MHZ,30PPM,28-AAN,20PF,50OH 1 SA

....4 T0568 3301-000314 BEAD-SMD;120ohm,1.6x0.8x0.8mm,150mA,,,,4 1 SNA






....4 T0568 3301-001145 BEAD-SMD;60OHM,4516,6000,TP,70OHM/45MHZ, 1 SNA

....4 CN906 3711-005503 CONNECTOR-HEADER;BOX,9P,1R,2mm,SMD-A,Sn+ 1 SA

....4 CN906 3711-005509 CONNECTOR-HEADER;BOX,4P,1R,1.25mm,SMD-A, 1 SA

....4 M0018 BN97-00579U ASSY MICOM;LS17BID*,W/W 1 SA

.....5 IC520 0903-001402 IC-MICROCONTROLLER;NT68F632ALG,8Bit,PLCC 1 SA

....4 IC113 1105-001165 IC-DRAM;416S1020,512Kx16BITx2,TSOP,50P 1 SA



....4 T0087 1203-002842 IC-POSI.FIXED REG.;AP1117D-33A,TO-252,3P 1 SA





....4 T0077 BN41-00621B PCB MAIN;Bizet_RTA,FR4,4L,MP1.1,1.6T,110 1 SNA

...3 M0524 BP39-00028A CONNECT WIRE;BI17,19BS,UL1007#26,9P,70mm 1 SA

...3 M0081 6003-000117 SCREW-TAPTITE;BH,+,B,M3,L6,ZPC(YEL),SWRC 1 SA


...3 M0081 6003-001439 SCREW-TAPTITE;BH,+,S,M4,L8,ZPC(YEL) 1 SNA

..2 M0006 BN96-01949A ASSY SHIELD P-COVER;BI17BS,SECC,T0.8,COR 1 SNA

...3 CIS BN61-01585A BRACKET-SHIELD;BI17BS,SECC,T0.8 1 SNA

...3 M0107 BN63-01767A SHIELD-COVER;BI17BS,SECC,T0.8,ONLY AMLCD 1 SNA

...3 CIS BN63-01774A SHIELD-INSULATOR;BI17/19BS,PET,T0.3 1 SNA

1 M0002 BN90-00700J ASSY COVER REAR;BI17BSSB,UNITED STATES 1 SNA..2 M0081 6003-000337 SCREW-TAPTITE;BH,+,S,M4,L10,ZPC(BLK),SWR 3 SA..2 M0006 BN63-01761A COVER-REAR SUB;BI17BS,ABS,T2.5,HB,HIGH-G 1 SNA

..2 M0013 BN96-01946A ASSY COVER P-REAR;BI17BS,ABS HB,BK24 1 SA

...3 M0113 BN61-01581A BRACKET-VESA;BI17/19BS,SECC,T1.0 2 SNA

...3 M0006 BN63-01760A COVER-REAR;BI17BS,ABS,T2.5,HB,BK24 1 SNA

...3 C/R BN73-00089A RUBBER-SET CAP;PO24FS,Elatomer,20~30 4 SNA

1 M0216 BN90-00706E ASSY STAND;BI17BSSB,UNITED STATES 1 SNA

..2 M0003 BN96-01947A ASSY STAND P;BI17BS,ABS HB,BK24 1 SA

...3 M0081 6003-000269 SCREW-TAPTITE;BH,+,S,M3,L6,ZPC(YEL),SWRC 2 SNA

...3 M0081 6003-001086 SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(BLK),SWR 4 SNA

...3 STD BN61-00822A STAND-BRKT HINGE;GS17VS,SECC,T1.2 1 SNA

...3 STD BN63-01762A COVER-STAND FRONT;BI17BS,ABS,T2.5,BK24 1 SNA

...3 STD BN63-01763A COVER-STAND REAR;BI17BS,ABS,T2.5,HB,BK24 1 SNA

...3 M0122 BN96-01061A ASSY MISC P-HINGE;MJ15-17AS/BS,ZNDC2 1 SNA

1 M0001 BN90-00755E ASSY COVER FRONT;LS17BIDSKSV/EDC 1 SNA..2 M0081 6003-001086 SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(BLK),SWR 3 SNA

..2 T0003 BN96-01917G ASSY COVER P-FRONT;BI17BS,ABS HB,BK24,73 1 SA

...3 M0112 BN63-01749A COVER-FRONT;BI17BS,ABS HB,T2.5,BK24 1 SNA

...3 T0069 BN63-01772B COVER-MIDDLE;BI17PS,ABS,T2.5,HB,GR70,SVM 1 SNA

...3 M0007 BN64-00304A KNOB-FUNCTION;MJ17MS,ABS+PC,5V,BK07 1 SNA

...3 M0105 BN67-00131A LENS-LED;MJ17MS,ACRYL,CLEAR 1 SNA

...3 M0145 BN96-02068A ASSY BOARD P-FUNCTION;BI17BS,CT5000-3310 1 SNA

1 M0112 BN91-00837P ASSY SHIELD;BI17BSSB 1 SNA..2 CIS BN63-01769A SHIELD-LAMP;BI17BS,SPTE,T0.3 1 SNA

1 BN91-00841H ASSY LCD-STZ;PO24FS 1 SNA..2 M0215 BN07-00206A LCD-PANEL;LTM170EX-L21,Bizet,6BIT FRC,35 1 SA

1 M0017 BN91-00889R ASSY CHASSIS-STZ;LS17BID*,W/W 1 SA..2 M2893 BN39-00663A LEAD CONNECTOR;LS17BIC,UL1571#30,30P,200 1 SA..2 M0174 BN44-00123A IP BOARD;SSIP-17-BZ-A,BI17VS,3.0 ~5.0mA, 1 SA1 M0019 BN92-01299U ASSY LABEL;BI17_19BSSB/EDC,W/W 1 SNA

1 M0113 BN92-01301P ASSY P/MATERIAL;BI17BSSB 1 SNA..2 T0376 6902-000061 BAG AIR;LDPE,T0.2,L1000,W500,TRP,,, 0.005 SNA..2 T0376 6902-000379 BAG AIR;LDPE,T0.2,W1000,L1800,TRP,-,-- 0.001 SNA..2 T0524 6902-000520 BAG PE;HDPE/NITRON(DOUBLE),T0.015/T0.5(D 1 SNA..2 P/M 6902-000604 BAG WRAPPING;LDPE,T0.02,W500,L10000,TRP, 0.6 SNA

1 M0003 BN92-01492U ASSY BOX;LS17BIDKSV/EDC 1 SNA..2 M0120 BH75-10529A UNIT-HANDLE PACKING;LXA410TLMU,PE,-,WHIT 1 SNA...3 M0103 BN72-60001A LEVER-TOP;LSD210TL,PE-LD,WHITE,TFT_LCD 1 SNA...3 M0102 BN72-60002A LEVER-BOTTOM;LSD210TL,PE-LD,WHITE,TFT-LC 1 SNA..2 BOX BN69-01016D BOX-00,SET;S/M730BF(BI17BS),CB-SW4,YEL,A 1.02 SNA

1 M0045 BN92-01493V ASSY ACCESSORY;LS17BIDKSV/EDC 1 SNA..2 M0125 BN39-00246F CBF SIGNAL-DVI(D);1703FP,24P/24P,20276-D 1 SA

..2 M0045 BN96-02164P ASSY ACCESSORY;LS17BIDKSV/EDC 1 SA

...3 T0268 3903-000042 CBF-POWER CORD;DT,EU,FP3/YES,IEC320 C13/ 1 SA

...3 T0524 6902-000110 BAG PE;LDPE,T0.05,L356,W240,TRP,28,2,PE 1 SNA

...3 ACCESSORY BH68-70438A CARD-11,BLOC WARRANTY;TFT LCD,BASIC,EU,M 1 SNA

...3 ACCESSORY BH68-70448A CARD-01;TFT LCD,SRC,RUSSIA,S/W,120,W210* 1 SNA

...3 M0215 BN96-00832V ASSY MANUAL P-IB+QSG;BIZET,730BF,930BF,S 1 SNA

....4 QUICK SETU BH68-00376L MANUAL-04;LCDQUICK SETUP GUIDE,SYNCMASTE 1 SNA

....4 IB BN59-00390V S/W DRIVER-00,IB;BIZET,730BF,930BF,W/W,S 1 SNA

....4 MAGICTUNE BN68-00847B MANUAL-02,QSG;MagicTune paper,SyncMaster 1 SNA

...3 T0059 BN68-00907A MANUAL-CARD;WEEE,SAMSUNG,18 Lang,Europe, 1 SNA

..2 M0013 BN96-02331B ASSY STAND P-BASE;HA17AS,ABS HB,GR70 1 SNA

...3 T0524 6902-000389 BAG PE;HDPE/NITRON/HDPE,T0.02/T0.5/T0.02 1 SNA

...3 CIS4 BN61-01717A HOLDER-STAND;BIZET,ZPC(WHT),CH,+,M4,L10( 1 SNA

...3 BN63-01989A COVER-STAND BASE;HY17,ABS,T2.5,200,200,H 1 SNA

...3 BN63-01990B COVER-STAND TOP;HA17AS,ABS,T2.5,200,200, 1 SNA

...3 BN68-00786F MANUAL-QSG;Bizet Stand Manual,SyncMaster 1 SNA

...3 M0126 BN73-00077A RUBBER-FOOT;MATISSE,BUMPON,##13.5,T2.0,6 4 SNA

..2 M0114 BN39-00244B CBF SIGNAL;MO15PS,15P/15P,20276-N,1830MM 1 SA


6-5


6-2 BI17DS Others


6-6


6-3 BI19DS Main PCB Parts

0 LS19BIDKSV/EDC 930BF,SGU3/S19A0-LBI,19,LCD-MO,NETHERLAN 0 SA

..2 M0014 BN94-00723G ASSY PCB MAIN-STZ;LS19BID*,W/W 1 SA

...3 T0245 0202-001366 SOLDER-WIRE FLUX;-,RS60S,D1.2,63Sn/37Pb, 0.01 SNA

...3 CN102 3701-001173 CONNECTOR-DVI;24P,3R,FEMALE,ANGLE,AUF 1 SA

...3 CN101 3701-001219 CONNECTOR-DSUB;15P,3R,FEMALE,ANGLE,AUF 1 SA

...3 CN906 3711-005884 CONNECTOR-HEADER;BOX,30P,2R,2mm,ANGLE,SN 1 SA

...3 T0174 BN97-00580T ASSY SMD;LS19BID* 1 SNA

....4 CIS5 0202-001375 SOLDER-CREAM;RMA-20-21L,S63,-,Sn63/Pb36. 1.51 SNA
















....4 Q409 0505-001170 FET-SILICON;SI9933ADY-T1,P,-20V,3.4A,0.0 1 SA

....4 IC109 1003-001538 IC-LCD CONTROLLER;S5D2542X,LQFP,208P,28X 1 SA

....4 IC109 1003-001789 IC-LCD CONTROLLER;SE59AWJ-LF,PQFP,128P,2 1 SA

....4 IC112 1103-000129 IC-EEPROM;24C02,256x8,SOP,8P,5x4mm,4.5/5 1 SA

....4 IC112 1103-001023 IC-EEPROM;24C08,1Kx8,SOP,8P,5x4mm,2.5/5. 1 SA








....4 R708 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R709 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R710 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R711 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R712 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R713 2007-000070 R-CHIP;0ohm,5%,1/10W,TP,1608 1 SA

....4 R701 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R702 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R704 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R705 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R706 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R721 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R722 2007-000071 R-CHIP;22ohm,5%,1/10W,TP,1608 1 SA

....4 R121 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R123 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R402 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 1 SA

....4 R107 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R109 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R200 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R201 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R217 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R219 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R220 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R228 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R229 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R231 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R232 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R233 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R234 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R235 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R236 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R237 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R238 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R239 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R240 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R241 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R242 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R252 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA

....4 R221 2007-000077 R-CHIP;470ohm,5%,1/10W,TP,1608 1 SA










6-7




































....4 R707 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R723 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R724 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R725 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R726 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 1 SA

....4 R401 2007-000118 R-CHIP;390ohm,5%,1/10W,TP,1608 1 SA

....4 R102 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R106 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R110 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R111 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R112 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R114 2007-000287 R-CHIP;100OHM,1%,1/10W,TP,1608 1 SA

....4 R122 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R124 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R127 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R128 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R129 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R130 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R131 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R132 2007-000659 R-CHIP;27ohm,5%,1/10W,TP,1608 1 SA

....4 R125 2007-000821 R-CHIP;390ohm,1%,1/10W,TP,1608 1 SA

....4 R117 2007-001002 R-CHIP;510ohm,5%,1/10W,TP,1608 1 SA

....4 R103 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R108 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R126 2007-001164 R-CHIP;75ohm,1%,1/10W,TP,1608 1 SA

....4 R410 2007-002899 R-CHIP;10ohm,1%,1/10W,TP,1608 1 SA

....4 R411 2007-002899 R-CHIP;10ohm,1%,1/10W,TP,1608 1 SA

























6-8



























....4 C114 2203-000998 C-CER,CHIP;0.047NF,5%,50V,C0G,TP,1608 1 SA




























































6-9



....4 X400 2801-003773 CRYSTAL-SMD;12MHZ,30PPM,28-AAN,20PF,50OH 1 SA







....4 T0568 3301-001145 BEAD-SMD;60OHM,4516,6000,TP,70OHM/45MHZ, 1 SNA

....4 CN906 3711-005503 CONNECTOR-HEADER;BOX,9P,1R,2mm,SMD-A,Sn+ 1 SA

....4 CN906 3711-005509 CONNECTOR-HEADER;BOX,4P,1R,1.25mm,SMD-A, 1 SA

....4 M0018 BN97-00579V ASSY MICOM;LS19BID*,W/W 1 SA

.....5 IC520 0903-001402 IC-MICROCONTROLLER;NT68F632ALG,8Bit,PLCC 1 SA




....4 T0077 BN41-00621B PCB MAIN;Bizet_RTA,FR4,4L,MP1.1,1.6T,110 1 SNA

...3 M0524 BP39-00028A CONNECT WIRE;BI17,19BS,UL1007#26,9P,70mm 1 SA



...3 M0081 6003-001439 SCREW-TAPTITE;BH,+,S,M4,L8,ZPC(YEL) 1 SNA

...3 M0131 AA63-01187A GASKET;BE40TS,Conductive Fabric,7 mm,13 2 SNA

..2 M0006 BN96-01951A ASSY SHIELD P-COVER;BI19BS,SECC,T0.8 1 SNA

...3 CIS BN61-01578A BRACKET-SHIELD;BI19BS,SECC,T1.0 1 SNA

...3 CIS BN63-01774A SHIELD-INSULATOR;BI17/19BS,PET,T0.3 1 SNA

...3 M0107 BN63-01780A SHIELD-COVER;BI19BS,SECC,T1.0 1 SNA


6-10


6-4 BI19DS Others

1 M0002 BN90-00700K ASSY COVER REAR;BI19BSSB,UNITED STATES 1 SNA..2 M0081 6003-000337 SCREW-TAPTITE;BH,+,S,M4,L10,ZPC(BLK),SWR 3 SA..2 M0006 BN63-01778A COVER-REAR SUB;BI19BS,ABS,T2.8,HB 1 SNA

..2 M0013 BN96-01952A ASSY COVER P-REAR;BI19BS,ABS HB,BK24 1 SA

...3 M0113 BN61-01581A BRACKET-VESA;BI17/19BS,SECC,T1.0 2 SNA

...3 M0006 BN63-01777A COVER-REAR;BI19BS,ABS HB,T2.5,BK24 1 SNA

...3 C/R BN73-00089A RUBBER-SET CAP;PO24FS,Elatomer,20~30 4 SNA

...3 C/R BN73-00096A RUBBER-PANEL;BI19BS,RUBBER,T6.0,50~60,NT 3 SNA

1 M0216 BN90-00706F ASSY STAND;BI19BSSB,UNITED STATES 1 SNA

..2 M0003 BN96-01953A ASSY STAND P;BI19BS,ABS HB,BK24 1 SA

...3 M0081 6003-000269 SCREW-TAPTITE;BH,+,S,M3,L6,ZPC(YEL),SWRC 4 SNA

...3 M0081 6003-001086 SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(BLK),SWR 6 SNA

...3 STD BN61-01067A STAND-BRKT HINGE;GS19VS,SECC,T1.6,NAT 1 SNA

...3 STD BN63-01842A COVER-STAND FRONT;BI19BS,ABS HB,T2.5,BK2 1 SNA

...3 STD BN63-01843A COVER-STAND REAR;BI19BS,ABS,T2.5,HB,BK24 1 SNA

...3 M0122 BN96-01062A ASSY MISC P-HINGE;MJ19AS/BS,ZNDC2 1 SNA

1 M0001 BN90-00755F ASSY COVER FRONT;LS19BIDSKSV/EDC 1 SNA..2 M0081 6003-001086 SCREW-TAPTITE;BH,+,B,M3,L12,ZPC(BLK),SWR 3 SNA

..2 T0003 BN96-01950E ASSY COVER P-FRONT;BI19BS,ABS HB BK24+GR 1 SA

...3 M0112 BN63-01775A COVER-FRONT;BI19BS,ABS HB,T2.5,BK24 1 SNA

...3 T0069 BN63-01776B COVER-MIDDLE;BI19BS,ABS,T2.5,HB,GR70,SVM 1 SNA

...3 M0007 BN64-00304A KNOB-FUNCTION;MJ17MS,ABS+PC,5V,BK07 1 SNA

...3 M0105 BN67-00131A LENS-LED;MJ17MS,ACRYL,CLEAR 1 SNA

...3 M0145 BN96-02069A ASSY BOARD P-FUNCTION;BI19BS,CT5000-3410 1 SNA

1 M0112 BN91-00837Q ASSY SHIELD;BI19BSSB 1 SNA..2 CIS BN63-01781A SHIELD-LAMP;BI19BS,SPTE,T0.3 1 SNA

1 BN91-00841R ASSY LCD-STZ;LS19BIC* 1 SNA..2 M0215 BN07-00222A LCD-PANEL;LTM190EX-L21,Haydn,6BIT FRC,39 1 SA

1 M0017 BN91-00889S ASSY CHASSIS-STZ;LS19BID*,W/W 1 SA..2 M2893 BN39-00664A LEAD CONNECTOR;LS19BIC,UL1571#30,30P,200 1 SA..2 M0174 BN44-00123A IP BOARD;SSIP-17-BZ-A,BI17VS,3.0 ~5.0mA, 1 SA1 M0019 BN92-01299U ASSY LABEL;BI17_19BSSB/EDC,W/W 1 SNA

1 M0113 BN92-01301Q ASSY P/MATERIAL;BI19BSSB 1 SNA..2 T0376 6902-000061 BAG AIR;LDPE,T0.2,L1000,W500,TRP,,, 0.009 SNA..2 T0376 6902-000379 BAG AIR;LDPE,T0.2,W1000,L1800,TRP,-,-- 0.001 SNA..2 T0524 6902-000520 BAG PE;HDPE/NITRON(DOUBLE),T0.015/T0.5(D 1 SNA..2 P/M 6902-000604 BAG WRAPPING;LDPE,T0.02,W500,L10000,TRP, 0.9 SNA

1 M0003 BN92-01492V ASSY BOX;LS19BIDKSV/EDC 1 SNA..2 M0120 BH75-10529A UNIT-HANDLE PACKING;LXA410TLMU,PE,-,WHIT 1 SNA...3 M0103 BN72-60001A LEVER-TOP;LSD210TL,PE-LD,WHITE,TFT_LCD 1 SNA...3 M0102 BN72-60002A LEVER-BOTTOM;LSD210TL,PE-LD,WHITE,TFT-LC 1 SNA..2 BOX BN69-01013D BOX-00,SET;S/M930BF(BI19BS),CB-SW4,YEL,A 1.02 SNA

1 M0045 BN92-01493W ASSY ACCESSORY;LS19BIDKSV/EDC 1 SNA..2 M0125 BN39-00246F CBF SIGNAL-DVI(D);1703FP,24P/24P,20276-D 1 SA

..2 M0045 BN96-02164P ASSY ACCESSORY;LS17BIDKSV/EDC 1 SA

...3 T0268 3903-000042 CBF-POWER CORD;DT,EU,FP3/YES,IEC320 C13/ 1 SA

...3 T0524 6902-000110 BAG PE;LDPE,T0.05,L356,W240,TRP,28,2,PE 1 SNA

...3 ACCESSORY BH68-70438A CARD-11,BLOC WARRANTY;TFT LCD,BASIC,EU,M 1 SNA

...3 ACCESSORY BH68-70448A CARD-01;TFT LCD,SRC,RUSSIA,S/W,120,W210* 1 SNA

...3 M0215 BN96-00832V ASSY MANUAL P-IB+QSG;BIZET,730BF,930BF,S 1 SNA

....4 QUICK SETU BH68-00376L MANUAL-04;LCDQUICK SETUP GUIDE,SYNCMASTE 1 SNA

....4 IB BN59-00390V S/W DRIVER-00,IB;BIZET,730BF,930BF,W/W,S 1 SNA

....4 MAGICTUNE BN68-00847B MANUAL-02,QSG;MagicTune paper,SyncMaster 1 SNA

...3 T0059 BN68-00907A MANUAL-CARD;WEEE,SAMSUNG,18 Lang,Europe, 1 SNA

..2 M0013 BN96-02332B ASSY STAND P-BASE;HA19AS,ABS HB,GR70 1 SA

...3 M0081 6003-000282 SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(BLK),SWCH 4 SNA

...3 T0524 6902-000389 BAG PE;HDPE/NITRON/HDPE,T0.02/T0.5/T0.02 1 SNA

...3 BN61-01235A SUPPORT-BRKT BASE;MJ19AS/BS,SECC,T1.6 1 SNA

...3 CIS4 BN61-01717A HOLDER-STAND;BIZET,ZPC(WHT),CH,+,M4,L10( 1 SNA

...3 BN63-01991A COVER-STAND BASE;HY19,ABS,T2.5,218,218,H 1 SNA

...3 BN63-01992B COVER-STAND TOP;HA19AS,ABS,T2.5,218,218, 1 SNA

...3 BN68-00786F MANUAL-QSG;Bizet Stand Manual,SyncMaster 1 SNA

...3 M0126 BN73-00077A RUBBER-FOOT;MATISSE,BUMPON,##13.5,T2.0,6 4 SNA

..2 M0114 BN39-00244B CBF SIGNAL;MO15PS,15P/15P,20276-N,1830MM 1 SA

6 Exploded View & Parts List

5-1

5 Exploded View and Parts List-You can search for updated part codes through ITSELF web site.URL : http://itself. sec. samsung.co.kr5-1 BI17DS Exploded View


5-2

No. DESCRIPTION CODE No. SPECIFICATION Q'ty REMARKS1 ASSY, COVER P-FRONT BN96-01917A ABS HB, BK24 1 SA

1-1 LABEL-TCO99 BN68-00035G LCD, TCO'99, PE, T0, 05, 10*9, CLEAR 1 SNA

1-2 COVER-FRONT BN63-01749A ABS HB, BK24 1 SNA

1-3 COVER-MIDDLE BN63-01772A ABS HB, HIGH GROSSY 1 SNA

1-4 KNOB-FUNCTION BN64-00304A MJ17MS, ABS+PC, BK07 1 SNA

1-5 LENS-LED BN67-00131A MJ17MS, ACRYL, CLEAR 1 SNA

1-6 ASS'Y BOARD P-FUNCTION BN96-02068A BI17BS, FUNCTION 1 SA

2 LCD-PANEL BN07-00206A AMLCD LTM170EX-L21 1 SA

3 ASS'Y MISC P-SHIELD COVER BN96-01949A BI17BS, SECC T0.8 1 SNA

3-1 SHIELD-COVER BN63-01767A SECC, T0.8 1 SNA

3-2 BRKT-SHIELD BN61-01585A SECC, T0.8 1 SNA

3-3 SHIELD-INSULATOR BN63-01774A PET, T0.35 1 SNA

3-4 PCB-MAIN BN94-00642U BI17B 1 SA

3-5 IP-BOARD BN44-00123A A07210008A,90~264VAC,13Vdc/2A,5Vdc/2A,52KHz 1 SA

3-6 SCREW-TAPTITE 6003-001439 WT, BH, +, S, M4, L8, ZPC(YEL), SWRCH18A 1 SA

3-7 SCREW-TAPTITE 6003-000117 BH, +, B, M3, L6, ZPC(YEL), SWRCH18A 3 SA

4 SHIELD-LAMP BN63-01769A SPTE, T0.3 1 SNA

5 ASS'Y COVER P-REAR BN96-01946A ABS HB,BK24 1 SA

5-1 BRACKET-VESA BN61-01581A BI17BS, SECC, T1.0, 75.0*75.0 2 SNA

5-2 COVER-REAR BN63-01760A ABS HB, BK24 1 SNA

5-3 RUBBER-CAP, SET BN73-00089A PO24FS, ELASTOMER, GRAY 4 SNA

6 SCREW-TAPTITE 6003-001086 BH, +, B, M3, L12, ZPC(BLK), SWRCH18A 3 SA

7 ASS'Y STAND P BN96-01947A ABS HB, BK24 1 SA

8 SCREW-TAPTITE 6003-000337 BH, +, S, M4, L10, ZPC(BLK), SWRCH18A 3 SA

9 ASS'Y STAND BASE BN96-01948A ABS HB, BK24 1 SA

10 COVER-REAR-SUB BN63-01761A ABS HB, BK24 1 SNA

5-2 BI17DS Parts List


5-3

5-3 BI19DS Exploded View


5-4

5-4 BI19DS Parts List

No. DESCRIPTION CODE No. SPECIFICATION Q'ty REMARKS1 ASSY, COVER P-FRONT BN96-01950A ABS HB, BK24 1 SA

1-1 LABEL-TCO99 BN68-00035G LCD, TCO'99, PE, T0, 05, 10*9, CLEAR 1 SNA

1-2 COVER-FRONT BN63-01775A ABS HB, BK24 1 SNA

1-3 COVER-MIDDLE BN63-01776A ABS HB, HIGH GROSSY 1 SNA

1-4 KNOB-FUNCTION BN64-00304A MJ17MS, ABS+PC, BK07 1 SNA

1-5 LENS-LED BN67-00131A MJ17MS, ACRYL, CLEAR 1 SNA

1-6 ASS'Y BOARD P-FUNCTION BN96-02069A BI19BS, FUNCTION 1 SA

2 LCD-PANEL BN07-00206A AMLCD LTM170EX-L21 1 SA

3 ASS'Y MISC P-SHIELD COVER BN96-01949A BI17BS, SECC T0.8 1 SNA

3-1 SHIELD-COVER BN63-01767A SECC, T0.8 1 SNA

3-2 BRKT-SHIELD BN61-01585A SECC, T0.8 1 SNA

3-3 SHIELD-INSULATOR BN63-01774A PET, T0.35 1 SNA

3-4 PCB-MAIN BN94-00642U BI17B 1 SA

3-5 IP-BOARD BN44-00123A A07210008A,90~264VAC,13Vdc/2A,5Vdc/2A,52KHz 1 SA

3-6 SCREW-TAPTITE 6003-001439 WT, BH, +, S, M4, L8, ZPC(YEL), SWRCH18A 1 SA

3-7 SCREW-TAPTITE 6003-000117 BH, +, B, M3, L6, ZPC(YEL), SWRCH18A 3 SA

4 SHIELD-LAMP BN63-01781A SPTE, T0.3 1 SNA

5 ASS'Y COVER P-REAR BN96-01952A ABS HB,BK24 1 SA

5-1 BRACKET-VESA BN61-01581A BI17BS, SECC, T1.0, 75.0*75.0 2 SNA

5-2 COVER-REAR BN63-01777A ABS HB, BK24 1 SNA

5-3 RUBBER-CAP, SET BN73-00089A PO24FS,ELASTOMER, GRAY 4 SNA

5-4 RUBBER-PANEL BN73-00096A BI19BS, ELASTOMER, BLACK 4 SA

6 SCREW-TAPTITE 6003-001086 BH, +, B, M3, L12, ZPC(BLK), SWRCH18A 3 SA

7 ASS'Y STAND P BN96-01953A ABS HB, BK24 1 SA

8 SCREW-TAPTITE 6003-000337 BH, +, S, M4, L10, ZPC(BLK), SWRCH18A 3 SA

9 ASS'Y STAND BASE BN96-01954A ABS HB, BK24 1 SA

10 COVER-REAR-SUB BN63-01778A ABS HB, BK24 1 SNA

1. Menu buttonOpens the OSD menu. Also use to exit the OSDmenu or return to the previous menu.

2. MagicBright button MagicBright is a new feature providing optimumviewing environment depending on the contents ofthe image you are watching. Currently six differentmodes are available: Custom, Text, Internet,Game, Sport and Movie. Each mode has its ownpre-configured brightness value. You can easilyselect one of six settings by simply pressingMagicBright control buttons.

1) Custom Although the values are carefully chosen by ourengineers, the pre-configured values may not becomfortable to your eyes depending on your taste. If this is the case, adjust the brightness and con-trast by using the OSD menu. 2) Text : Normal brightness For documentations or works involving heavy text.

3) Internet : Medium brightness For working with a mixture of images such as textand graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie : High brightness For watching motion pictures such as a DVD orVideo CD.

3. Brightness buttonWhen OSD is not on the screen, push the buttonto adjust brightness.

2,3. Adjust buttonsAdjust items in the menu.

10 Operating Instructions and Installation

10-1


10-1 Front


10-2

4. Enter button / Source button Activates a highlighted menu item. / Push the 'SOURCE', then selects the video signalwhile the OSD is off. (When the source button ispressed to change the input mode, a messageappears in the center of the screen displaying thecurrent mode -- analog or digital input signal.)Note : If you select the digital mode, you must con-nect your monitor to the graphic card's port usingthe DVI cable.

5. Auto button Use this button for auto adjustment.

6. Power button Use this button for turn the monitor on and off.

7. Power indicatorThis light glows green during normal operation,and blinks green once as the monitor saves youradjustments.

10-2 Rear

(The configuration at the back of the monitor may vary from product to product.)

1. Power portConnect the power cord for your monitor to the power port on the back of the monitor.

2. DVI port Connect the DVI cable to the DVI port on the back of your monitor.

3. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

1. Connect the power cord for your monitor to the power port on the back of the monitor.Plug the power cord for the monitor into a nearby outlet.

2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

2-2. Using the DVI (Digital) connector on the video card.Connect the DVI cable to the DVI port on the back of your monitor.

2-3. Connected to a Macintosh.Connect the monitor to the Macintosh computer using the D-SUB connection cable.

2-4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.


10-3

10-3 Connecting the monitor

Rear of monitorRear of Computer

New Model Macintosh

Old Model Macintosh

10-4 Monitor Assembly


10-4


10-5

10-5 Attaching a Base- This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad.

A. Monitor

B. Mounting interface pad

1. Turn off your monitor and unplug its power cord.

2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3. Remove four screws and then remove the stand from the LCD monitor.

4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

Memo


10-6

12 PCB Layout

12-1

12 PCB Diagram

12 PCB Layout

12-2

Memo

1 Precautions

1-1

1-1-1 Warnings1. For continued safety, do not attempt to modify the circuit

board.2. Disconnect the AC power and DC power jack before

servicing.

1-1-2 Servicing the LCD Monitor1. When servicing the LCD Monitor, Disconnect the AC

line cord from the AC outlet.2. It is essential that service technicians have an accurate

voltage meter available at all times. Check thecalibration of this meter periodically.

1-1-3 Fire and Shock HazardBefore returning the monitor to the user, perform thefollowing safety checks:1. Inspect each lead dress to make certain that the leads are

not pinched or that hardware is not lodged between thechassis and other metal parts in the monitor.

2. Inspect all protective devices such as nonmetallic controlknobs, insulating materials, cabinet backs, adjustmentand compartment covers or shields, isolation resistor-capacitor networks, mechanical insulators, etc.

3. Leakage Current Hot Check (Figure 1-1):

WARNING : Do not use an isolation transformer during this test.

Use a leakage current tester or a metering system thatcomplies with American National Standards Institute(ANSI C101.1, Leakage Current for Appliances), andUnderwriters Laboratories (UL Publication UL1410,59.7).

Figure 1-1. Leakage Current Test Circuit

4. With the unit completely reassembled, plug the AC linecord directly into a 120V AC outlet. With the unit’s ACswitch first in the ON position and then OFF, measurethe current between a known earth ground (metal waterpipe, conduit, etc.) and all exposed metal parts,including: metal cabinets, screwheads and control shafts.The current measured should not exceed 0.5 milliamp.Reverse the power-plug prongs in the AC outlet andrepeat the test.

1-1-4 Product Safety NoticesSome electrical and mechanical parts have special safety-related characteristics which are often not evident from visualinspection. The protection they give may not be obtained byreplacing them with components rated for higher voltage,wattage, etc. Parts that have special safety characteristics areidentified by on schematics and parts lists. A substitutereplacement that does not have the same safety characteristicsas the recommended replacement part might create shock, fireand/or other hazards. Product safety is under reviewcontinuously and new instructions are issued wheneverappropriate.

1 PrecautionsFollow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.

1-1 Safety Precautions

1 Precautions

1-2

1-2-1 General Servicing Precautions

1. Always unplug the unit’s AC power cord from the ACpower source and disconnect the DC Power Jack beforeattempting to:(a) remove or reinstall any component or assembly, (b)disconnect PCB plugs or connectors, (c) connect a testcomponent in parallel with an electrolytic capacitor.

2. Some components are raised above the printed circuitboard for safety. An insulation tube or tape is sometimesused. The internal wiring is sometimes clamped toprevent contact with thermally hot components. Reinstallall such elements to their original position.

3. After servicing, always check that the screws,components and wiring have been correctly reinstalled.Make sure that the area around the serviced part has notbeen damaged.

1. Immediately before handling any semiconductorcomponents or assemblies, drain the electrostatic chargefrom your body by touching a known earth ground.Alternatively, wear a discharging wrist-strap device. Toavoid a shock hazard, be sure to remove the wrist strapbefore applying power to the monitor.

2. After removing an ESD-equipped assembly, place it on aconductive surface such as aluminum foil to preventaccumulation of an electrostatic charge.

3. Do not use freon-propelled chemicals. These cangenerate electrical charges sufficient to damage ESDs.

4. Use only a grounded-tip soldering iron to solder ordesolder ESDs.

5. Use only an anti-static solder removal device. Somesolder removal devices not classified as “anti-static” cangenerate electrical charges sufficient to damage ESDs.

4. Check the insulation between the blades of the AC plugand accessible conductive parts (examples: metal panels,input terminals and earphone jacks).

5. Insulation Checking Procedure: Disconnect the powercord from the AC source and turn the power switch ON.Connect an insulation resistance meter (500 V) to theblades of the AC plug.The insulation resistance between each blade of the ACplug and accessible conductive parts (see above) shouldbe greater than 1 megohm.

6. Always connect a test instrument’s ground lead to theinstrument chassis ground before connecting the positivelead; always remove the instrument’s ground lead last.

6. Do not remove a replacement ESD from its protectivepackage until you are ready to install it. Mostreplacement ESDs are packaged with leads that areelectrically shorted together by conductive foam,aluminum foil or other conductive materials.

7. Immediately before removing the protective materialfrom the leads of a replacement ESD, touch theprotective material to the chassis or circuit assembly intowhich the device will be installed.Caution: Be sure no power is applied to the

chassis or circuit and observe all other safety precautions.

8. Minimize body motions when handling unpackagedreplacement ESDs. Motions such as brushing clothestogether, or lifting your foot from a carpeted floor cangenerate enough static electricity to damage an ESD.

1-3 Electrostatically Sensitive Devices (ESD) PrecautionsSome semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly calledElectrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect transistors. Thefollowing techniques will reduce the incidence of component damage caused by static electricity.

1-2 Servicing PrecautionsWARNING: An electrolytic capacitor installed with the wrong polarity might explode.

Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions sectionof this manual.

Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safetyprecautions, always follow the safety precautions.

2 Product Specifications

2-1


2-1 Fashion Feature

- Improved Response Time by Adopting RTA : 4ms (Based on "Gray to Gray")

- Develop Cost Effective Model

- LCD Monitor Standardization/Develop Concept-leading Product

- Develop New Design & Advanced Stand

- Apply integrated GUI for the user's convenience

2-2 Specifications

Model BI17DS BI19DS Remark

EX-L21(AMLCD) EX-L21(AMLCD)

TSED/SDMA/SESK/SAMAX/SESK

- Inverter : SUNKOREA/SEMCO

Simple

Size : 110 x 107mmShape : Two-sided

SE59AWJ

DTC34LM85AL

ABS HB

Band Type Shield

YES / NO

N.A

300 cd/m2

700 : 1(Typical)

80/80/70/60

4 ms

300 cd/m2

700 : 1(Typical)

4 ms

75/75/75/60

Factory

SET

PANEL

STAND

Inverter/Adaptor

Round/Rectangle Types

TILT : +23O / -1O

Typ.

Typ.

CR 10

CR 10:1 Basis

PCB-MAIN

Scaler

LVDS

Resin

Shield Structure

TILT / Swivle

PIVOT / LIFT

Note

Brightness

CR

Response Time

Viewing Angle


2-2

Model BI17DS BI19DS Remark

31KHz ~ 80KHz

135MHz

Sep./Comp./SOG

31KHz ~ 80KHz

135MHz

Sep./Comp./SOG

VGA ~ SXGA VGA ~ SXGA

Menu/ (MAGIC BR)/ ( )/Enter(Source)/Auto/Power

Integrated UI applied

IP BOARD(140 X 148)

34 W(Max.), 30W(Normal) 38 W(Max.), 34W(Normal)

422.7 x 427 x 205

5.2/11.46

< 1W

SUNKOREA/SEMCO

382 x 386.2 x 175

3.6/7.93

460 x 452 x 134

5.3/11.68

500 x 492 x 152

7.3/16.09

Supported Resolution

POWER

PRODUCT

Package

INPUT

Frequency

Max.Pixel Freq.

Sync Type

Support Safe Mode (up to UXGA)

Fv : 56Hz ~ 75Hz

( ) : direct accessKey Function

OSD

Type

Consumption

DPMS

Maker

Dimension (W x H x D)

Weight (kg/lbs)

Dimension(W x H x D)

Weight (kg/lbs)


2-3

Item Item Name CODE.NO Remark

Quick Setup Guide BH68-00376L

BH68-70438A

BN59-00390Q

BN39-00244B

3903-000042

BN39-00341A Sold separatelys

Warranty Card(Not available in all loca-

tions)

User's Guide,Monitor Driver,

Natural Color software,MagicTune software

D-Sub(15 Pin) Cable

Power Cord

DVI Cable

2-3 Option Specification

Memo


2-4

14 Reference Infomation

14-1

14 Reference Infomation14-1 Technical Terms

-TFT-LCD(Thin film Transistor Liquid Crystal Display)ADC(Analog to Digital Converter) This is a circuit that converts from analog signal todigital signals.

-PLL(Phase Locked Loop)During progressing ADC, Device makes clock syn-chronizing HSYNC with Video clock

-InverterDevice that supply Power to LCD panel lamp. thisdevice gernerate about 1,500~2,000V.

AC AdapterDevice that converts AC(90V~240V) to DC(+12V or14V)

SMPS(Switching Mode Power Supply)Switching Mode Power supply. This design technol-ogy is used to step up/down the input power byswitching on/off

-FRC(Frame Rate Controller)Technology that change image frame quantity dis-played on screen for one second.Actually TFT-LCD panel require 60 pcs of frame for

one second.so,this technology is needed to convert input imageto 60 pcs regardless input frame quantity.

-Image ScalerTechnology that convert various input resolution toother resolution.(ex. 640* 480 to 1024*768)

-Auto Configuration(Auto adjustment)This is an algorithm to adjust monitor to optimumcondition by pushing one key.

-OSD(On Screen Display)On screen display. customer can control the screeneasily with this.

-Image LockThis means "Fineness adjustment " in LCD Monitor,the features are "Fine" and "Coarse"

-FINE"Fine" adjustment is used to adjust visibility by con-trol phase difference.

-COARSEThis is a adjustment by tuning with Video colck andPLL clock.

-DVI (Digital Visual Interface)This provides a high speed digital connection forvisual data types that is display technology inde-pendent. this interface is primarily forcused at pro-viding a connection between a computer andits display device.

-L.V.D.S.(Low Voltage Differential Signaling)a kind of transmission method for Digital.It can beused from Main PBA to Panel.

-DVI (Digital Visual Interface)This provides a high speed digital connection forvisual data types that is display technology inde-pendent. this interface is primarily forcused at pro-viding a connection between a computer and its dis-play device.

-T.M.D.S(Transition minimized Differential Signaling)a kind of transmission method for Digital. It can be used from Video card to Main PBA.

-DDC(Display data channel)It is a communication method between HostComputer and related equipment.It can make it Plug and Play between PC andMonitor.


14-2

-EDIDExtended Display Identification Data PC can recog-nize the monitor information as Product data,Product name,Display mode,Serial number andSignal source,etc through DDC Line communicatingwith PC and Monitor.

-Dot PitchThe image on a monitor is composed of red, greenand blue dots. The closer the dots, the higher theresolution. The distance between two dots of thesame color is called the 'Dot Pitch'. Unit: mm

-Vertical FrequencyThe screen must be redrawn several times per sec-ond in order to create and display an image for theuser. The frequency of this repetition per second iscalled Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 timesper second, this is regarded as 60 Hz.

-Horizontal FrequencyThe time to scan one line connecting the right edgeto the left edge of the screen horizontally is calledHorizontal Cycle. The inverse number of theHorizontal Cycle is called Horizontal Frequency.Unit: kHz

-Interlace and Non-Interlace MethodsShowing the horizontal lines of the screen from thetop to the bottom in order is called the Non-Interlacemethod while showing odd lines and then even linesin turn is called the Interlace method. The Non-Interlace method is used for the majority of monitorsto ensure a clear image. The Interlace method is thesame as that used in TVs.

-Plug & Play This is a function that provides the best qualityscreen for the user by allowing the computer andthe monitor to exchange information automatically.This monitor follows the international standardVESA DDC for the Plug & Play function.

-ResolutionThe number of horizontal and vertical dots used tocompose the screen image is called 'resolution'.This number shows the accuracy of the display.High resolution is good for performing multiple tasksas more image information can be shown on thescreen.

Example: If the resolution is 1280 x 1024 , thismeans the screen is composed of 1280 horizontaldots (horizontal resolution) and 1024 vertical lines(vertical resolution).


14-3

SyncType

Pin No.

15-Pin D-Sub Signal Cable Connector

Separate Composite

123456789

101112131415

RedGreenBlueGNDDDC Return (GND)GND-RGND-GGND-BDDC Power Input (+5V)Self RasterGNDBi-Dr Data (SDA)H-Sync.V-Sync.DDC Clock (SCL)

RedGreenBlueGNDDDC Return (GND)GND-RGND-GGND-BDDC Power Input (+5V)Self RasterGNDBi-Dr Data (SDA)H/V-Sync.Not UsedDDC Clock (SCL)

RedGreen + H/V Sync.BlueGNDDDC Return (GND)GND-RGND-GGND-BDDC Power Input (+5V)Self RasterGNDBi-Dr Data (SDA)Not UsedNot UsedDDC Clock (SCL)

Sync-on-green

No Connection

+5V_M

Self Raster

+5V_M

Rx0-

Rx0+

NC

No Connection

No Connection

NC

RxC+

RxC-

13

14

15

16

17

18

19

20

21

22

23

24

1

2

3

4

5

6

7

8

9

10

11

12

Rx2-

Rx2+

GND

No Connection

No Connection

DDC Clock (SCL)

DDC Data (SDA)

NC

Rx1-

Rx1+

NC

No Connection

SyncType

Pin No.24P DVI-D

14-2 Pin Assignments


14-4

Separate Sync

14-3 Timing Chart

C D

A O

E

B P

Video

Sync Sync

Video

Q R S

A : Line time total B : Horizontal sync width O : Frame time total P : Vertical sync width

C : Back porch D : Active time Q : Back porch R : Active time

E : Front porch S : Front porch

H/V Composite Sync

Sync-on-Green

79.975

12.504

1.067

1.837

9.481

0.119

75.025

13.329

0.038

0.475

12.804

0.013

135.000

Positive

Positive

Separate

1280/75 Hz1280x1024

1280/60 Hz1280x1024

63.981

11.852

1.037

2.296

9.259

0.000

60.020

16.005

0.047

0.594

15.630

0.016

108.000

Positive

Positive

Separate

31.469

31.777

3.813

1.589

26.058

0.318

70.087

14.268

0.064

0.858

13.155

0.191

28.322

Negative

Positive

Separate

μ

μ

μ

μ

μ

IBM

640/75 Hz640x480

800/60 Hz800x600

800/75 Hz800x600

1024/60 Hz1024x768

1024/75 Hz1024x768

VGA2/70 Hz

720 x 400

VGA3/60 Hz

640 x 480

Table 2-1 Timing Chart

31.469

31.778

3.813

1.589

26.058

0.318

59.940

16.683

0.064

0.794

15.761

0.064

26.175

Negative

Negative

Separate

37.500

26.667

2.032

3.810

20.317

0.508

75.000

13.333

0.080

0.427

12.800

0.027

31.500

Negative

Negative

Separate

37.879

26.400

3.200

2.200

20.000

0.000

60.317

16.579

0.106

0.607

15.840

0.0261

40.000

Positive

Positive

Separate

46.875

21.333

1.616

3.232

16.162

0.323

75.000

13.333

0.064

0.448

12.800

0.021

49.500

Positive

Positive

Separate

48.363

20.677

2.092

2.462

15.754

0.369

60.004

16.666

0.124

0.600

15.880

0.062

75.000

Negative

Negative

Separate

60.023

16.660

1.219

2.235

13.003

0.203

75.029

13.328

0.050

0.466

12.795

0.017

78.750

Positive

Positive

Separate

Mode VESA

Timing

This section of the service manual describes the timing that the computer industry recognizes as standard for computer-generated video signals.


14-5

14-4 Preset Timing Modes

Sync Polarity(H/V)

Pixel Clock(MHz)

Vertical Frequency(Hz)

HorizontalFrequency

(kHz)Display Mode

MAC, 640 x 480 35.000 66.667 30.240 -/-

MAC, 832 x 624 49.726 74.551 57.284 -/-

MAC,1152 x870 68.681 75.062 100.000 -/-

IBM, 640 x 350 31.469 70.086 25.175 +/-

IBM, 640 x 480 31.469 59.940 25.175 -/-

IBM, 720 x 400 31.469 70.087 28.322 -/+

VESA, 640 x 480 37.500 75.000 31.500 -/-

VESA, 640 x 480 37.861 72.809 31.500 -/-

VESA, 800 x 600 35.156 56.250 36.000 +,-/+,-

VESA, 800 x 600 37.879 60.317 40.000 +/+

VESA, 800 x 600 46.875 75.000 49.500 +/+

VESA, 800 x 600 48.077 72.188 50.000 +/+

VESA, 1024 x 768 48.363 60.004 65.000 -/-

VESA, 1024 x 768 56.476 70.069 75.000 -/-

VESA, 1024 x 768 60.023 75.029 78.750 +/+

VESA, 1152 x 864 67.500 75.000 108.00 +/+

VESA 1280 x 960 60.000 60.000 108.00 +/+

VESA, 1280 x 1024 63.981 60.020 108.00 +/+

VESA, 1280 x 1024 79.976 75.025 135.00 +/+

-If the signal transferred from the computer is the same as the following Preset Timing Modes, the screenwill be adjusted automatically. However, if the signal differs, the screen may go blank while the power LEDis on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing

Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is calledHorizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz

Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display animage to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz


14-6

SEC LT140X1-002 BN07-00004A SA BN68-00239H -SEC LT150XS-L01 BN07-00009A SB -SEC LT150XS-L01-B BN07-00022A SC -SEC LTM150XS-L02 BN07-00005A SD -SEC LT181E2-132 BN07-00001A SE -SEC LT150XS-T01 BN07-00010A SF -SEC LTM181E3-132 BN07-00019A SG -SEC LT170E2-131 BN07-10001D SH -SEC LT181E2-131 BN07-10001E SJ -SEC LTM170E4-L01 BN07-00018A SK -SEC LTM240W1-L01 BN07-00015A SL -SEC LTM213U3-L01 BN07-00016A SM -SEC LTM150XH-L01 BN07-00026A SN -SEC LTM150XH-L03 BN07-00027A SP -SEC LTM150XS-L01 BN07-00032A SQ DELL(ZPD)SEC LTM181E4-L01 BN07-00034A SR PVASEC LTM170EH-L01 BN07-00036A SS TNSEC LTM170E5-L01 BN07-00037A SU PVASEC LTM150XH-L11 BN07-00041A SV -SEC LTM213U4-L01 BN07-00039A SW PVASEC LTM150XH-L01(ZPD) BN07-00045A SX ZPDSEC LTM150XH-L04 BN07-00046A SY "New panel with high brightness"SEC LTM170W1-L01 BN07-00047A SZ Panel for TVSEC LTM150XH-L06 BN07-00053A EA Panel for TV/ High luminance for 450cd _ SONY&EOS Team Panel for TVSEC LTM153W1-L01 BN07-00054A EB Use NIKE MODELSEC LTM170EH-L05 BN07-00055A EC Panel EOS proj. for high brightness of 17" EH-L05SEC LTM170E5-L03 BN07-00056A ED Dell 1702FP pro. E4. EH mechanicalCompatibleSEC LTM190E1-L01 BN07-00057A EE DELL 1900 FPSEC LTM181E5-L01 BN07-00061A EF 18" narrow bezel GH18PSSEC LTM150XP-L01 BN07-00065A EG AMLCD PVA PANELSEC LTM240W1-L02 BN07-00062A EH Panel for 15" Wide TVSEC LTM170EU-L01 BN07-00071A EJ Slim design, TNSEC LTM170E5-L04 BN07-00072A EK E5-L04 6 bits FRC... for IBMSEC LTA220W1-L01 BN07-00074A EL Panel for 22" TVSEC LTM170E6-L02 BN07-00075A EM AMLCD Narrow & slim design 17" PVAmodeSEC LTM170W1-L01 BN07-00082A EN LTM170W1-L01 ZPD panelSEC LTM170EH-L01 BN07-00080A EP LTM170EH-L01 ZPD panelSEC LTM170E5-L01 BN07-00081A EQ LTM170E5-L01 ZPD panelSEC LTM170EH-L05 BN07-00083A ER LTM170EH-L05 ZPD panelSEC LTM170E5-L03 BN07-00084A ES LTM170E5-L03 ZPD panelSEC LTM170EU-L01 BN07-00085A ET LTM170EU-L01 ZPD panelSEC LTM170E5-L04 BN07-00086A EU LTM170E5-L04 ZPD panelSEC LTM170E6-L02 BN07-00087A EV LTM170E6-L02 ZPD panelSEC LTM150XH-L06 BN07-00091A EW "Color coordinates change for LCD TV"SEC LTM153W1-L01 BN07-00092A EX AMLCD WIDE 15",9/10SEC LTM170W1-L01 BN07-00100A EY "Color Coordinates change code management"SEC LTM170EH-L05 BN07-00097A EZ "LTM170E5-L05 Color Coordinates Change Panel Code"SEC LTA400W1-L01 BN07-00109A S1 "PANEL of AMLCD 40"" TV"SEC LTM153W1-L01 BN07-00110A S2 "Color coordinates change 0.280/0.290, 10000k & ZPD Panel"SEC LTM150XH-L06 BN07-00111A S3 "Color coordinates change 0.280/0.290, 10000k & ZPD Panel"SEC LTM170W1-L01 BN07-00112A S4 "Color coordinates change 0.280/0.290, 10000k & ZPD Panel"SEC LTM170EH-L05 BN07-00113A S5 "Color coordinates change 0.280/0.290, 10000k & ZPD Panel"SEC LTM220W1-L01 BN07-00114A S6 "ZPD Panel for AMLCD 22"" TV"

Maker VENDOR P/N PANEL_CODE PANEL_ABB STICKER_CODE Remarks

14-5 Panel Description


14-7

SEC LTM150XH-L06 BN07-00117A S7 "ZPD Panel code"SEC LTM153W1-L01 BN07-00118A S8 "ZPD Panel code"SEC LTM170WP-L01 BN07-00119A S9 "PVA Panel for NIKE"SEC LTM213U4-L01 BN07-00039A E1 21.3" NARROWSEC LTA260W1-L01 BN07-00121A E2 VENUSSEC LTA220W1-L01 BN07-00074B E3 "Panel B-level panel code for 22"" TV Panel "SEC LTA320W1-L01 BN07-00108A E4 "Panel for AMLCD 32"" TV"SEC LTM213U4-L01 BN07-00124A E5 NARROW BEZEL 21 " PANELSEC LTM170E6-L04 BN07-00129A E6 "HIGHLAND 17"" LOW PANEL (Panel only for TCO03)"SEC LTM190E1-L01 BN07-00088A E7 LTM190E1-L01 ZPD panelSEC M150X4-L06 BN07-00137A E8 15" Narrow & Slim panel SEC LTA170V1 BN07-00139A E9 "17"" Panel for Muse 4:3 VGA TV"SEC LTM190E1-L02 BN07-00128A E10 "New Panel from AMLCDl, Specification : 6bit Driver IC"SEC LTM170EX-L01 BN07-00143A E11 "Development new Panel from AMLCD"SEC LTM170E8-L01 BN07-00144A E12 "Development new Panel from AMLCD"SEC LTM170E6-L04 BN07-00129B E13 "ZPD panel for AMLCD (Panel only for TCO03)"SEC LTA320W1-L02 BN07-00108B E14 "Creat B-level Panel code for AMLCD 32"" TV"SEC LTM190E1-L03 BN07-00151A E15 "Development new 19"" Panel form AMLCD (Panel only for TCO03)"SEC LTM240W1-L03 BN07-00134A E16 "AMLCD 24"" panel development"SEC LTM190E1-L02 BN07-00128B E17 "New Panel from AMLCD, Specification : 6bit Driver IC(ZPD)"SEC LTM190E4-L01 BN07-00145A E18 "AMLCD 24"" new panel development"SEC LTM170E8-L01 BN07-00158A E19 "ZPD code derivation"SEC LTM170EX-L01 BN07-00159A E20 "ZPD code derivation"SEC LTM190E1-L03 BN07-00151B E21 "Creat new panel code for AMLCD 19"" (Panel only for TCO03)"SEC LTA460H1-L01 BN07-00157A E22 "creat panel code for AMLCD 46"" TV "SEC LTM170EU-L11 BN07-00160A E23 "creat new panel code for AMLCD 17"" (Panel only for TCO03)"SEC LTM240W1-L03 BN07-00134B E24 "24"" panel ZPD code derivation"SEC LTM190E4-L01 BN07-00145B E25 "AMLCD 19"" ZPD Panel code derivation"SEC LTM240W1-L03 BN07-00134B E26 24" panel ZPD code derivationSEC LTM150XO-L01 BN07-00164A E27 AMLCD 15" XO-L01 new panel developmentSEC LTM150XO-L01 BN07-00164B E28 AMLCD 15" XO-L01 ZPD code derivationSEC LTM170EU-L11 BN07-00160B E29 AMLCD 17" NEW panel code derivationSEC LTA320W2-L01 BN07-00172A SPZ AMLCD 32" NEW panel SEC LTM213U4-L01 BN07-00124B SPZ 21.3" Narrow PANEL ZPD Panel derivationSEC LTM170EU-L11 BN07-00189A STH AMLCD EU-L11 Pb free panel code derivtionSEC LTM170EU-L11 BN07-00189B STZ AMLCD EU-L11 Pb free panel ZPD code derivationSEC LTM240W1-L04 BN07-00188A SPH 24" A-DCC new panel developmentSEC LTM190EX-L01 BN07-00191A STH AMLCD 19" TN new Panel SEC LTM190EX-L02 BN07-00191B STZ AMLCD 19" TN new Panel ZPD derivationSEC LTA230W1-L02 BN07-00184A SPZ AMLCD 23" 16:9 new Panel SEC LTA260W2-L01 BN07-00185A SPZ AMLCD 26" 16:9 new Panel SEC LTM240M1-L01 BN07-00195A SPH 24" panel with high brightness deveiopmentSEC LTA400W2-L01 BN07-00186A SPZ AMLCD 40" 16:9 new Panel SEC LTM150XO-L01 BN07-00197A STH AMLCD 15" XO-L01 Pb free panel code SEC LTM150XO-L01 BN07-00197B STZ AMLCD 15" XO-L01 Pb free panel ZPD codeSEC LTM170EU-L21 BN07-00202A STZ AMLCD EU-L21 ZPD new code derivationSEC LTA460W2-L03 BN07-00187A SPZ BEETOVEN 46"ZPD new Panel

CPT CLAA150XG09 BN07-00141A PA CPT 15" Monitor new panel developmentCPT CLAA170EA02 BN07-00148A PB 17" CPT NEW development panelCPT CLAA170EA02 BN07-00148B PC 17" CPT ZPD panel code derivationCPT CLAA150XG09 BN07-00141B PTZ "CPT 15"" panel ZPD code derivation (GOYA-PJT)"CPT CLAA150XP01 BN07-00173A PTH CPT 15" PSWG code derivationCPT CLAA150XP01 BN07-00173B PTZ CPT 15" PSWG panel ZPD code



14-8

CPT CLAA170EA07 BN07-00174A PTH "CPT 17"" PSWG panel code derivation?CPT CLAA170EA07 BN07-00174B PTZ CPT 17"""" PSWG type new Panel code"""CPT CLAA170EA07 BN07-00174B PTZ CPT 17" PSWG type new Panel code

TOSHIBA LTM15C419(A) BN07-00002A TA -TOSHIBA LTM15C423(B) BN07-00006A TB -TOSHIBA LTM18C161 BN07-00008A TC -TOSHIBA LTM15C443 BN07-00031A TD -TOSHIBA LTM15C458 BN07-00043A TE -TOSHIBA LTM15C458S BN07-00077A TF "TSB 15"" high brightness Panel"TOSHIBA LTM15C458 BN07-00078A TG Toshiba ZPD panelTOSHIBA LTM15C458S BN07-00099A TH TSB LTM15C458S ( ZPD )

HANNSTAR HSD150MX41A(A) BN07-00020A NA "TTL type"HANNSTAR HSD150MX12 BN07-00030A NB "TTL type"HANNSTAR HSD170ME13 BN07-00180A NTH Hannstar 17" TN new panel developmentHANNSTAR HSD170ME13 BN07-00180B NTZ Hannstar 17" TN new panel development ZPD code derivation

TORISAN TM150XG-22L03(A) BN07-00021A RA -TORISAN TM150XG-26L06 BN07-00042A RB -TORISAN TM181SX-76N01 BN07-00048A RC -TORISAN TM150XG-26L06 BN07-00059A RD 15" XGA TN MODE(ZPD)TORISAN TM290WX-71N31 BN07-00063A RE "RS24NS (TORISAN 29"" NEW PANEL)"TORISAN TM396WX-71N31 BN07-00064A RF "RS24NS (TORISAN 40"" NEW PANEL)"TORISAN TM150XG-26L09 BN07-00073A RG "Panel for 15"" TV"TORISAN TM150XG-26L10 BN07-00089A RH "L10(change except D/IC) ZPD"TORISAN TM150XG-26L10 BN07-00090A RJ L10 NORMALTORISAN TM190SX-70N01 BN07-00098A RK Torisan 19" PanelTORISAN TM181SX-76N01 BN07-00106A RL ZPD Panel code TORISAN TM190SX-70N01 BN07-00107A RM ZPD Panel code TORISAN TM290WX-71N31 BN07-00115A RN "Color Coordinates change panel for TORISAN 29"" TV"TORISAN TM396WX-71N31 BN07-00116A RP,Q "Color Coordinates change panel for TORISAN 40"" TV"TORISAN TM22OWX-71N31 BN07-00125A RR "Development TORISAN 22"" TV PANEL (ZPD)"TORISAN TM22OWX-71N31 BN07-00127A RS "Development TORISAN 22"" TV PANEL (HPD)"TORISAN TM396WX-71N32A BN07-00150A RT 120V inverter Exclusive panelTORISAN TM190SX-70N02 BN07-00154A RMH Torisan 6bit panel code DerivationTORISAN TM190SX-70N02 BN07-00154B RMZ Torisan 6bit panel code Derivation

SHARP LQ181E1DG11(A) BN07-10001C PA -SHARP LQ150X1LW71 BN07-00067A PB SHARP 15" PVA PANEL

HITACHI TX38D12VC0CAA(A) BN07-00003A HA -HITACHI TX43DVCOCAB BN07-00060A HB 17" SXGA PVA MODEHITACHI TX43D15VC0CAB BN07-00101A HC ZPD Panel HITACHI TX51D11VC0CAB BN07-00122A HD 20.1" NARROWHITACHI TX54D11VC0CAB BN07-00123A HE 21.3" NARROWHITACHI TX80D12VC0CAB BN07-00169A HIZ "Development new panel for Hitachi 32"" TV (ZPD)"HITACHI TX54D11VC0CAB BN07-00123B HIZ Hitachi 21.3"ZPD panel

IBM ITSX94S BN07-00017A IA -

UNIPAC UM170E0 BN07-00028A UA Loaded by cisdba

HYUNDAI HT15X13 BN07-00035A DA -



14-9

HYUNDAI HT17E11-200 BN07-00049A DB TN MODEHYUNDAI HT17E11-300 BN07-00093A DC HT17E11-300 ZPD panelHYUNDAI HT17E11-400 BN07-00094A DD HT17E11-400 normal panel HYUNDAI HT17E11-400 BN07-00095A DE HT17E11-400 ZPD panel code HYUNDAI HT17E12 BN07-00096A DF HT17E12 ( Narow & slim Design )HYUNDAI HT17E12 BN07-00105A DG ZPD Panel code HYUNDAI HT15X15-D00 BN07-00146A DH "Development for Ares 15"" Hydis TV"HYUNDAI HT15X15-D01 BN07-00146B DJ "Derivation panel HPD for Ares 15"" Hydis TV "HYUNDAI HT17E13-100 BN07-00167A DTH "PINEHURST-2(IBM) PJT 17"" HYDIS PANEL Derivation"HYUNDAI HT17E13-100 BN07-00167B DTZ "PINEHURST-2(IBM) Hydis 17"" ZPD code Derivation"

ACER L170E3 BN07-00044A AA TN(ADT) ACER M170EN05 BN07-00076A AB AU 17" Panel (Narrow & slim design)ACER M170EN05 BN07-00102A AC ZPD Panel code ACER M190EN02 BN07-00170A AMH "AU Monitor 19"" new panel development (P19-1S)"ACER M190EN02 BN07-00170B AMZ "AU 19"" ZPD code derivation (ZPD)"ACER M170EN06 BN07-00171A ATH "AU Monitor 17"" New panel development"ACER T260XW01 BN07-00163A AMZ "AU 26"" new panel developm(NF26EO)"ACER A201SN01 BN07-00177A ATZ "AU TV panel 20.1"" TN SVGA new panel development"ACER M170EN06 BN07-00171B ATZ "AU Monitor 17"" ZPD code DerivationACER T315XW01 BN07-00194A AMZ AU 32" newACER M170EG01 BN07-00192A ATH AU TN PSWG type new Panel code ACER M170EG01 BN07-00192B ATZ AU TN PSWG type NEW panel code derivation

CHIMEI M170E3-LO1 BN07-00050A CA TN PANEL CHIMEI M150X3-L01 BN07-00051A CB COMPATIBLECHIMEI M170E4-L01 BN07-00052A CC MVA PANEL CHIMEI M150X2-L01 BN07-00066A CD CHIME 15"I PVA PANEL CHIMEI M150X3-L01 BN07-00079A CE Chimei ZPD panelCHIMEI M170E3-L01 BN07-00103A CF ZPD Panel code CHIMEI M170E4-L01 BN07-00104A CG ZPD Panel code CHIMEI V296W1-L01 BN07-00120A CH MVACHIMEI M170E6-L02 BN07-00126A CJ HIGHLAND 17" LOW PANEL CHIMEI M190E2-L01 BN07-00131A CK GH19AS,BS CHIMEI PANELCHIMEI M150X4-L06 BN07-00137A CL 15" Narrow & Slim panel CHIMEI M170E6-L01 BN07-00133A CM "2003-03-11 vendor change"CHIMEI M170E6-L01 BN07-00133B CN "ZPD derivation panel"CHIMEI V201V1-T01 BN07-00135A CP "CHIMEI 20.1"" panel development"CHIMEI M170E6-L02 BN07-00126B CQ "HIGHLAND 17"" LOW PANEL ZPD derivation panel"CHIMEI M170E6-L05 BN07-00152A CR "CMO 17"" new panel development code"CHIMEI M170E6-L05 BN07-00152B CS "CMO 17"" ZPD panel code derivation"CHIMEI M150X4-L06 BN07-00137B CT Chimei 15" Narrow & Slim panel ZPD derivationCHIMEI M170E5-L05 BN07-00165A CTH CMO 17" new panel development code (GOYA2-PJT)CHIMEI M170E5-L05 BN07-00165B CTZ CMO 17" ZPD panel(GOYA2-PJT)



14-10

Memo

9 Schematic Diagrams

9-1

9 Schematic Diagrams- This Document can not be used without Samsung’s authorization.

4 5 76

123

9 Schematic Diagrams

9-2

1 2 3 4

5 6 7

4 Troubleshooting

4-1

’•••

•••

“ ”

4-1 No Power (BI17DS/BI19DS)

When Pin 3,4 and 5 of CN402 is 0V

does proper DC 5V appear at Pin 6 and 7 of

CN402 separately?

Change IP Board.

’

Yes

Yes

No

When Pin 3 of IC603 is DC 5V does proper DC 3.3V appear at

Pin 2 of IC603?Check IC603 and related circuit.

No

Yes

When Pin 3 of IC602 isDC 5V does proper DC 1.8Vappear at Pin 2 of IC602?

Check IC602 and related circuit.No

Yes

When Pin 3 of IC605 isDC 5V does proper DC 5V appear

at Pin 5,6,7 and 8 of IC605?Check IC605 and related circuit.

No

* 0V means power on state.When the monitor work well except DPMS and powerswitch off, 0V should be applied to number 4 of CN600.

*

4 Troubleshooting

4 Troubleshooting

4-2

X400 oscillate properly?

4-2 No Video (ANALOG)

1 Replace or check related circuit.

Check signal cable connection andpower.

Yes

No

Is there R, G, B input atR106, R111 and R114? Check input part.

Yes

No

Is there Hsync, Vsync waveform

at Pin 100, 1 of IC 400?Check IC400 and related circuit.

No

Yes

Is there Hsync, Vsync waveform

at Pin 41, 42 of IC 200?Check IC200 and related circuit.

No

Yes

Does the output signal appear at Pin 3,4,6,7,9,10,

15~20 and 22~27 of CN400?Check IC400 and related circuit.

No

Yes

There are DC 5V at Pin28,29 and 30 of CN400?

Check PANEL_EN SIGNAL at R236is High(On:High) and BL_EN signal

at R605(ON:Low) is Low

No

Yes

Replace LCD Panel.

2

2

3

3

4 Troubleshooting

4-3

1

WAVEFORMS

2

3

123

4 Troubleshooting

4-4

X400 oscillate properly?

4-3 No Video (DIGITAL)

1 Replace or check related circuit.

Check signal cable connection andpower.

Yes

No

Is there R, G, B input at

R124, R128, R130, R122,R127 and R129?

Check input part.

Yes

No

Is there waveform

at R131, R132?Check input part.

No

Yes

Does the output signal appearat Pin 3, 4, 6, 7, 9, 10, 15~20

and 22~27 of CN400?Check IC400 and related circuit.

No

Yes

There are DC 5V at Pin 1, 2 and 3 of CN400?

Check the panel EN signal at R222and BLEL signal at R603.

No

Yes

Replace LCD Panel.

7

654

4 Troubleshooting

4-5

1

WAVEFORMS

5

4

6

7

4 Troubleshooting

4-6

4 5 76

1

8 Wiring Diagram

8-1

8 Wiring Diagram

8 Wiring Diagram

8 Wiring Diagram

8-2

Memo

Documents

Samsung Syncmaster 930bf Chassis Bi17ds Bi19ds Ls17 19bidks Sm