Sandvik Construction A world leader in Construction Module 6 How to sell Sandvik cone crushers

Sandvik ConstructionA world leader in Construction

Module 6How to sell Sandvik cone crushers

Sandvik Construction2

Sandvik Cone Crushers How to sell cone crushers Eccentric bush

Throw Indicator

Throws Available


There are a number of steps as material passes through the chamber

Sandvik Cone Crushers How to sell cone crushers Speed

When the falling stone is caught, it is trapped and to some degree pushed upwards.


Sandvik Cone Crushers How to sell cone crushers ASRi


1. Automatically adjusts for; Changes in feed material size. Changes in material toughness. Changes in material moisture content. Manganese wear.

2. Protects the crusher against overloads during normal operation.

3. Allows easy adjustment of product size. On the fly adjustment

4. Maintains the maximum crusher performance. Independent of feed conditions.

5. Improves production and product quality.



A crusher can be operated in 4 modes Manual: With ASRi disconnected.

With ASRi operational a choice of 3 program modes

Auto CSS: This program will always try and hold a pre-set CSS setting for controlled reduction..

Multi CSS: This program will allow operation between two pre-set CSS over pre-set times and is used when a non-standard product curve is preferred.

Auto Load: This program basically regulates on either power or pressure whichever limit is reached first and so minimises the setting for maximum reduction.



Sandvik Cone Crushers How to sell cone crushers The complete package

Top serviceability – safer and easier maintenance and inspection

Simple and strong design philosophy

Strong unibody structure, mainshaft supported at both ends and few moving parts

Hydroset™ system – online adjustment under full load

ASRi™ – Automatic Setting Regulation

True automation of the setting, thereby facilitating online adjustment during full load

and ensuring peak performance at all times

CLP crushing chambers

Constant Liner Performance maintains the feed opening and performance during

the entire service life of the liners

Adjustable throw – maximize performance and balance capacity within the process


Sandvik Cone Crushers How to sell cone crushers CH540 and CH550


Sandvik Cone Crushers How to sell cone crushers CH540 performance stategy

CH430

CH540

+ 90 %

Keep!

Increase!

44 % larger eccentric throw!

Increase!

30 % higher crushing force!

Improve!


Sandvik Cone Crushers How to sell cone crushers CH550 performance stategy

CH440

CH550

+ 50 %

Keep!

Increase!

20 % larger eccentric throw!

Increase!

30 % higher crushing force!

Improve!


Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 comparison

Same feed opening

Same cone diameter

Installed power increased

Maximum throw increased to 52mm

Strength increased

Similar foot print and profile



Spider arm positions improved Positive effect on material flow

6 arm bottomshell


Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 the Perfect match

Compact and high performing HYDROCONE crushers.52mm throw and more crushing force.

Manganese (cone/mantle) designed to achieve higher performance

ASRi as standard

Dump valve as tramp iron protection

Plastic free

Hydraulic motor bracket

IE3 motors

Unique look


Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 Maintenance/EHS.

Well-defined lifting points for safe handling of heavy components.

No welding when changing wear parts*

Hardox/rubber linings in bottom shell and on cone plates

Lifting tools for cone and mantle available


Sandvik Cone Crushers How to sell cone crushers Parts improvement/EHS

Wear resistant spider bushing

Specifically developed alloy

Increased lifespan by up to 100 percent

Lifting holes

200%

100%



Improved Mainshaft sleeve

Tapered fit + oil grooves

With the new design there is no heating or grinding required, also making the change safer.

The new mainshaft sleeve can be changed in less than 15 minutes. This means up to 80 percent quicker change compared to current mainshaft sleeves on the market.

15min

90min



Improved Mainshaft sleeve

The new simplified procedure only requires a torque wrench and a hand driven oil pump.

1 2 3

4 5 6



Improved Step components New oil groove pattern improve lubrication, which reduces wear and friction by up to 10%.

The all-new Step Components are partly run in during manufacturing enabling up to 80% faster break in.

Holes for attaching lifting tool, new lifting tool.


Sandvik Cone Crushers How to sell cone crushers CH540 Estimated capacity

CH430, chambers EF to EC CH540, chambers EF to EC

Each line represents a combination of an available crushing chamber and an eccentric throw.

Granite, 2.65 t/m3

PlantDesigner estimation

CH440, chambers EF to EC

CH540CH540

CH540


Sandvik Cone Crushers How to sell cone crushers CH550 Estimated capacity

CH440, chambers F to EC CH550, chambers F to EC

Each line represents a combination of an available crushing chamber and an eccentric throw.

CH

550

CH660, chambers EF to EC

Granite, 2.65 t/m3

PlantDesigner estimation

CH

550


Sandvik Cone Crushers How to sell cone crushers CH550/CH540 Improved product shape




Sandvik ConstructionA world leader in Construction

Documents

Sandvik Construction A world leader in Construction Module 6 How to sell Sandvik cone crushers