Upload
meanrat
View
55
Download
2
Embed Size (px)
DESCRIPTION
Saunders S360 Presentation
Citation preview
Saunders® S360 Range of Actuators for Life Science Applications
CRANE ChemPharma Flow SolutionsTM
Sales Presentation
Saunders® S360 Actuator
The S360 has been developed in response to evolution of the Life Science Market
The S360 has been developed in response to evolution of the Life Science Market
Key Features include
Modular range delivers optimum dimensional envelope and closure performance
Full 360° rotation of actuator allows flexible installation and air port alignment
Smooth corrosion resistant profile optimizes cleanability
Saunders® S360 Actuator
Construction
Piston type actuator: high cycle life, lower air consumption and more compact design versus diaphragm type
316L Stainless Steel Housing and Compressor
Spindle guides to reduce friction, provide long service life without galling
Saunders® S360 Actuator
Modes of Operation
Spring to Close Type- Uses powerful spring(s) to close against system pressure- Uses combination of air pressure and system pressure to open
Valves automatically close in event of loss of air supply or electrical power
90% + applications
Fail close valves protect
integrity of piping system if
power fails
Modes of Operation
Spring to Open Type- Uses Air to close against system pressure- Uses combination of spring and system pressure to open
Valves automatically open in event of loss of air supply or electrical power
Typical Application:Suction Side of Pump
Modes of Operation
Double Acting Type- Uses air to close against system pressure- Uses combination of operating air and system pressure to open
Valves fail in last position in event of loss of air supply or electrical power
Least Common Actuator Type
Typical Applications
The majority of Life Science applications have pressure on one side of the weir only
This condition is generally called 100% pressure drop, or 100% ∆P
This is the most common service condition in the Life Science Industry
This is the most common service condition in the Life Science Industry
Typical Applications
Maximum force is working against actuator. This is not a common service condition in the Life Science Industry
Maximum force is working against actuator. This is not a common service condition in the Life Science Industry
The force on the diaphragm is greatest when there is pressure on both upstream and downstream sides of the weir
This condition is generally called 0% pressure drop, or 0% ∆P
Practical Thinking
100% ∆P applications include use point, sampling, drain, recirculating loop and most batch type process applications
0% ∆P applications create dead legs – stagnant fluid in piping and is not a common or acceptable condition in Life Science applications
S360 Lite suited for majority of 100% and many 0% ∆P applications; S360 Power designed for the limited number of higher pressure
applications
S360 Lite suited for majority of 100% and many 0% ∆P applications; S360 Power designed for the limited number of higher pressure
applications
• Modular design delivers optimum size, weight, closure performance and diaphragm life
• Two different spring-to-close options
Saunders® S360 ActuatorModular Design
1.50” (DN40) Lite
1.50” (DN40) Power1.50” (DN40) Previous SSC
S360 Lite with compact, lightweightdesign for typical applications
S360 Power for maximum high pressure duty or severe closure applications
S360 Power DN15 – DN50(Closure 0-16bar / 0-232psi PTFE Diaphragm)
S360 Lite DN8 – DN50(Closure 0-8bar / 0-116psi PTFE Diaphragm)
Saunders® S360 Actuator
S360 Lite (Spring-to-Close)• Smaller• Lighter• Best Value• Reduced diaphragm stress
Saunders® S360 Actuator
1.50” (DN40) Lite 1.50” (DN40) Power
S360 Lite meets industry performance standards for closureS360 Lite meets industry performance standards for closure
Saunders® S360 Actuator
1.50” (DN40) Lite 1.50” (DN40) Power
S360 Power (Spring-to-Close)• Higher Pressure Capabilities
S360 Power delivers best in class closure performanceS360 Power delivers best in class closure performance
Saunders® S360 Actuator
Housings based on Power Range
Full 360 degree rotation
Full 360° rotation of actuator head allows flexible installation and air port alignment
360° Rotation
To change actuator head position, back off Allen screw located on air cylinder, rotate airport to desired position and tighten screw
To change actuator head position, back off Allen screw located on air cylinder, rotate airport to desired position and tighten screw
360° Rotation
Interchangeable Compressor Design
Allows interchangeability between rubber and PTFE styled compressors without dismantling actuator
Allows interchangeability between rubber and PTFE styled compressors without dismantling actuator
Threaded Connection for elastomer diaphragms
Bayonet Connection for PTFE diaphragms
Stainless Steel Housing• Polished 316 Stainless Steel• Robust and secure design• Withstand typical industry washdown regimes• Compliments stainless processing
components and systems
Clean OD profile• Easily cleaned • Ideal for clean fermentation and downstream
processing areas
Saunders® S360 Actuator
Mechanical Polished Air Cylinder
Saunders® S360 Actuator
Optional 15 Ra (0.4 µm) average finishStandard 25 Ra (0.6 µm) average finish
Flanged & Shrouded Base Options
Flanged Base for use with 2 way, tandems and block bodies (standard offering)
Saunders® S360 Actuator
Optional Shrouded Base for 2 way bodies only
Covers fasteners with no exposed threads
Saunders® S360 Actuator
Marking 2D Barcode
Valve Size
Model type
Maximum Air Supply
Air Connection Thread
* Using a unique serial number the 2D bar code provides full traceability of assembly and test data
* Using a unique serial number the 2D bar code provides full traceability of assembly and test data
Accessories
-Mounting on cap via (2) 4 mm female holes-Single bolt circle all sizes DN8-DN50 (0.25” – 2.00”)-Existing accessories will mount to S360
Options include:- Limit Open Stop- Limit Closed Stop- Manual Hand wheel
Saunders® S360 Actuator
Industry Approvals
Conforming Materials of ConstructionConforming Lubricant
Saunders® S360 Actuator
Brochure
8 Page Brochure available on-line atwww.SaundersS360.com
8 Page Brochure available on-line atwww.SaundersS360.com
Technical Datasheet
Data Sheet includes: Performance Graphs, Dimensional Info. Consult Saunders for specific recommendations
Data Sheet includes: Performance Graphs, Dimensional Info. Consult Saunders for specific recommendations
Dimensions for S360 Actuator
Saunders® S360 Actuator
Dimensions available in technical data sheet and pdf dimensionaldrawings, 2D AutoCAD and 3D IGES files are available at
http://drawings.craneflow.com
Dimensions available in technical data sheet and pdf dimensionaldrawings, 2D AutoCAD and 3D IGES files are available at
http://drawings.craneflow.com
Saunders® S360 IOM Manual
IOM Manual includes•How to replace diaphragm, Compressor interchangeability, S360 degree rotation etc.
IOM Manual includes•How to replace diaphragm, Compressor interchangeability, S360 degree rotation etc.
Website
www.SaundersS360.com
New domain www.SaundersS360.com used for product launch to offer quick
access to the featured information
New domain www.SaundersS360.com used for product launch to offer quick
access to the featured information
Saunders S360 added to web-
site
Saunders S360 added to web-
site
For further information please contact Andrew Powell at [email protected]
Thank You