2
The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable. The Mules work in pairs. One Mule combines the video signals to transmit them down 1 single co-ax, the other Mule then reconstructs the individual video signals at the remote end. A low-cost, easy solution that offers huge installation benefits and opportunities to add extra cameras. The clever electronics of the CCTV Mule allow it to carry audio and video along the same co-axial cable. You can even carry one video signal in one direction and one in the other direction! T he CCTV Mules need a 12V power supply at both ends but other than that, it’s a really simple device to use, with no real configuration to do. Order Code Description MULE002 Mule 2, Tx & Rx Units Takes the donkey work out of fitting additional CCTV cameras ! Also available in 4 way Code: MULE004 No need to run in extra cables, it does the donkey work not you. CCTV MULE 2 Video In 1 1x RG59 OUT Video In 2 Send 2 Video signals down 1 Co-ax cable ...with a Mule2 Voltage - 12V DC, Tx 125mA, Rx 120mA Video inputs - 2, outputs - 1 Tx Video inputs - 1, outputs - 2 Rx Video quality D1 @ 25fps - Every Camera Gain control for different cable lengths Operation modes - 4 types Cable required – RG59 or better Max Cable length – 200mtrs Size – 91 x 88 x 28mm Mule2 Spec It’s the easy way to add extra cameras to an existing installation! * as per instructions 12V DC Up to 2 videos down co-ax* No need for extra cables* Audio transmission* Up to 200mtrs* Easy to setup

Send 2 Video signals down 1 Co-ax cable with a Mule CCTV ... · Takes the donkey work out of fitting additional CCTV cameras! Also available inG 4 way Code: MULE004 No need to run

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Send 2 Video signals down 1 Co-ax cable with a Mule CCTV ... · Takes the donkey work out of fitting additional CCTV cameras! Also available inG 4 way Code: MULE004 No need to run

The CCTV Mule makes it easy to add extra cameras to existing installations, you saveinstallation time and reduce the cost of buying and installing more cable. The Mules work in pairs. One Mule combines the video signals to transmit them down 1 single co-ax, theother Mule then reconstructs the individual video signals at the remote end. A low-cost, easy solution thatoffers huge installation benefits and opportunities to add extra cameras.

The clever electronics of the CCTV Mule allow it to carry audio and video along the same co-axial cable.You can even carry one video signal in one direction and one in the other direction!

The CCTV Mules need a 12V power supply at both ends but other than that, it’s a really simple device touse, with no real configuration to do.

Order Code Description

MULE002 Mule 2, Tx & Rx Units

Takes the donkey work out of fittingadditional CCTV cameras !

Also availablein 4 way

Code: MULE004

No need to run inextra cables,

it does the donkeywork not you.

CCTVMULE2

Video In1

1x RG59

OUT

Video In2

Send 2 Video signals down 1 Co-ax cable ...with a Mule2

Voltage - 12V DC, Tx 125mA, Rx 120mAVideo inputs - 2, outputs - 1 TxVideo inputs - 1, outputs - 2 RxVideo quality D1 @ 25fps - Every CameraGain control for different cable lengthsOperation modes - 4 typesCable required – RG59 or betterMax Cable length – 200mtrsSize – 91 x 88 x 28mm

Mule2 Spec

It’s the easy way to add extra cameras toan existing installation!

* as per instructions

12V DC•Up to 2 videos down co-ax*•No need for extra cables*•

Audio transmission*•Up to 200mtrs*•Easy to setup•

Page 2: Send 2 Video signals down 1 Co-ax cable with a Mule CCTV ... · Takes the donkey work out of fitting additional CCTV cameras! Also available inG 4 way Code: MULE004 No need to run

2 has 4 Operation Modes !

For more info see:

www.cctvmule.com

1 Video signal and 1 audio signal.Mode3

Audio

1 Video signal in one direction, 1 audio signal in the opposite direction.Mode4

1 Video signal in one direction, 1 video signal in the opposite direction.Mode2

V2 in this direction

New VoiceOFF - Alarm activated voice/sound warning unit, see >>>

V1

V2V1 in thisdirection

1x RG59 co-ax cable

Mule 2 - Tx Mule 2 - Rx

12V DC12V DC

V1

V2

Audio in this direction

V1

V1 & Audio inthis direction

1x RG59 co-ax cable

Mule 2 - Tx Mule 2 - Rx

12V DC12V DC

V1

Audio

Audio

V1

V1 in this direc-tion

1x RG59 co-ax cable

Mule 2 - Tx Mule 2 - Rx

12V DC12V DC

V1

Audio

V1

V2V1 & V2 in

this direction

1x RG59 co-ax cable

Mule 2 - Tx Mule 2 - Rx

2 Video signals down 1 co-ax cableMode1

12V DC12V DC

V1

V2