-
7/30/2019 Sensing Ribbon Northumbria University
1/21
Design by L Williams 27/8/2012
Update 8th Sept
-
7/30/2019 Sensing Ribbon Northumbria University
2/21
Applications, Smart Bandage, fabrics
-
7/30/2019 Sensing Ribbon Northumbria University
3/21
E-Ribbon Feb 2012 10mm wide,
shift registers LEDS RO goal in Feb 2012 said make
1mm wide
-
7/30/2019 Sensing Ribbon Northumbria University
4/21
-
7/30/2019 Sensing Ribbon Northumbria University
5/21
-
7/30/2019 Sensing Ribbon Northumbria University
6/21
-
7/30/2019 Sensing Ribbon Northumbria University
7/21
-
7/30/2019 Sensing Ribbon Northumbria University
8/21
-
7/30/2019 Sensing Ribbon Northumbria University
9/21
Multiple memory bits in series 101010
-
7/30/2019 Sensing Ribbon Northumbria University
10/21
The parallel inputs can be switches,
sensors, PWM signal, touch sensors e.g.
finger
-
7/30/2019 Sensing Ribbon Northumbria University
11/21
0.8V
4mA for bright LED
0.9uA when static
Speed 50 to 600MHz depending on powersupply
More data here
http://www.nxp.com/products/logic/flip_flops/d_type_flip_flops/series/74AUP1G79.htmlhttp://www.nxp.com/products/logic/flip_flops/d_type_flip_flops/series/74AUP1G79.html
-
7/30/2019 Sensing Ribbon Northumbria University
12/21
-
7/30/2019 Sensing Ribbon Northumbria University
13/21
Track printing 0.1mm wide
-
7/30/2019 Sensing Ribbon Northumbria University
14/21
-
7/30/2019 Sensing Ribbon Northumbria University
15/21
SWG MM21 0.813
22 0.711
-
7/30/2019 Sensing Ribbon Northumbria University
16/21
0.15mm thick
2 layers as ground needed
-
7/30/2019 Sensing Ribbon Northumbria University
17/21
-
7/30/2019 Sensing Ribbon Northumbria University
18/21
-
7/30/2019 Sensing Ribbon Northumbria University
19/21
Add grains to paint, must be self aligning
in 3D jigsaw, and correct orientation.
PCB substrate with indents
-
7/30/2019 Sensing Ribbon Northumbria University
20/21
-
7/30/2019 Sensing Ribbon Northumbria University
21/21
Currently also done with printed
magnetic paint and magnetising bit
