38
SHOES KNOWLEDGE Shoe Making- How Shoes are Made Footwear can be defined as garments that are worn on the feet. Their main purpose is protecting one's feet. Of late, footwear has become an important component of fashion accessories . Although, their basic purpose remains that of protection, adornment or defining style statement has become their additional and a significant function. There are many types of footwear- shoes , boots , sandals , slippers etc. They are further categorized into many more types. Shoes and Shoe making Shoes are further divided into many categories such as athletic shoes also known as sneakers , galoshes, high heels, Stiletto heels, kitten heels, lace-up shoes, high- Tops, loafers, Mary Janes, platform shoes, school shoes and many others. Shoemaking can be considered a traditional handicraft profession. However, now it has been largely taken over by industrial manufacture of footwear. A variety of materials are used for making shoes- leather fabrics , plastic, rubber, fabrics , wood, jute fabrics , and metal. More than 200 operations are required for making a pair of shoes. However, with the development of modern machines, a pair of shoes can be made in very less time as each step in its manufacturing is

Shoe Making

Embed Size (px)

Citation preview

Page 1: Shoe Making

SHOES KNOWLEDGE

Shoe Making- How Shoes are Made

Footwear can be defined as garments that are worn on the feet. Their main purpose is protecting one's feet. Of late, footwear has become an important component of fashion accessories. Although, their basic purpose remains that of protection, adornment or defining style statement has become their additional and a significant function. There are many types of footwear- shoes, boots, sandals, slippers etc. They are further categorized into many more types.

Shoes and Shoe making

Shoes are further divided into many categories such as athletic shoes also known as sneakers, galoshes, high heels, Stiletto heels, kitten heels, lace-up shoes, high-Tops, loafers, Mary Janes, platform shoes, school shoes and many others. Shoemaking can be considered a traditional handicraft profession. However, now it has been largely taken over by industrial manufacture of footwear. A variety of materials are used for making shoes- leather fabrics, plastic, rubber, fabrics, wood, jute fabrics, and metal. More than 200 operations are required for making a pair of shoes. However, with the development of modern machines, a pair of shoes can be made in very less time as each step in its manufacturing is generally performed by a separate footwear making machine.

Parts of a ShoeA shoe consists of sole, insole, outsole, midsole, heel, and vamp (upper). They are the basic parts of a shoe that are mostly included in all types off shoes. Other parts of a shoe are lining, tongue, quarter, welt and backstay. These parts are included as per the design of the shoes.

Sole: The exterior bottom part of a shoe is the sole.

Insole: The interior bottom of a shoe, which sits directly beneath the foot, is its

Page 2: Shoe Making

insole. They can be removable and replaceable too. In some of the shoes, extra insoles are often added for comfort, health or other reasons, such as to control the shape, moisture, or smell of the shoe.

Outsole: It is that layer of the shoe that is in direct contact with the ground. These can be made of various materials like leather, natural or synthetic rubber etc. Often the heel of the sole is made from rubber for durability and traction and the front is made of leather for style. Special purpose shoes often have refined modifications, for example, athletic cleats have spikes embedded in the outsole to grip the ground, dance shoes have much softer or harder soles.

Midsole: The layer that lies between the outsole and the insole for shock absorption, is the midsole. Some special shoes, like running shoes have other materials for shock absorption, that usually lie beneath the heel where one puts the most pressure down. Materials used for midsoles depend on the shoe manufacturers. Some shoes can be made even without a midsole.

Heel: The rear part at the bottom of a shoe is the heel. It supports the heels of the feet. Heels of a shoe are often made from the same material as the sole of the shoe. It can be high for fashion purpose or for making a person look taller. They are also flat for comfort and practical use.

Vamp, or upper: The upper part of a shoe that helps in holding the shoe onto the foot is the vamp or simply called the upper. This part is often embellished or given different styles to make shoes attractive.

Shoe Making ProcessA footwear company has mainly four departments in which a progressive route is followed for producing finished shoes. These are- Clicking or Cutting Department, Closing or Machining Department, Lasting & Making Department, Finishing Department and the Shoe Room.

Clicking or Cutting DepartmentIn this department, the top part of the shoe or the "upper" is made. The clicking operative is given skins of leather, mostly cow leather but not restricted to this type of leather. Using metal strip knives,

Page 3: Shoe Making

the worker cuts out pieces of various shapes that will take the form of "uppers". This operation needs a high level of skill as the expensive leather has to be wasted at the minimum level possible. Leather may also have various defects on the surface such as barbed wire scratches which needs to be avoided, so that they are not used for the uppers.

Closing or Machining DepartmentHere the component pieces are sewn together by highly skilled machinists so as to produce the completed upper. The work is divided in stages. In early stages, the pieces are sewn together on the flat machine. In the later stages, when the upper is no longer flat and has become three-dimensional, the machine called post machine is used. The sewing surface of the machine is elevated on a post to enable the operative to sew the three dimensional upper. Various edge treatments are also done onto the leather for giving an attractive look to the finished upper. At this stage only, the eyelets are also inserted in order to accommodate the laces in the finished shoes.

Lasting & Making DepartmentThe completed uppers are molded into a shape of foot with the help of a "Last". Last is a plastic shape that simulates the foot shape. It is later removed from the finished shoe to be used further in making other shoes. Firstly, an insole to the bottom of the last is attached. It is only a temporary attachment. Sometimes, mostly when welted shoes are manufactured, the insole has a rib attached to its under edge. The upper is stretched and molded over the last and attached to the insole rib. After the procedure completes, a "lasted shoe" is obtained. Now, the welt- a strip of leather or plastic- is sewn onto the shoe through the rib. The upper and all the surplus material is trimmed off the seam. The sole is then attached to the welt and both are stitched together. The heel is then attached which completes the "making" of the shoe.

That was the process for heeled shoes. When a flat shoe is in the making, there are considerably fewer operations. The insoles in this case is flat and when the uppers are 'lasted', they are glued down to the surface of the inner side of the insole. The part of the upper, that is glued down, is then roughed with a wire brush to take off the smooth finish of the leather. This is done because rough

Page 4: Shoe Making

surface absorbs glue to give a stronger bond. The soles are usually cut, finished and prepared as a separate component so that when they are glued to the lasted upper, the result is a complete and finished shoe. Soles can also be pre-molded as a separate component out of various synthetic materials and again glued to the lasted upper to complete the shoe.

Finishing Department and the Shoe RoomThe finishing of a shoe depends on the material used for making it. If made of leather, the sole edge and heel are trimmed and buffed to give a smooth finish. To give them an attractive finish and to ensure that the edge is waterproof, they are stained, polished and waxed. The bottom of the sole is often lightly buffed, stained and polished and different types of patterns are marked on the surface to give it a craft finished look. A "finished shoe" has now been made.

For shoe room operation, an internal sock is fitted into shoe which can be of any length- full, half or quarter. They usually have the manufacturers details or a brand name wherever applicable. Depending on the materials used for the uppers, they are then cleaned, polished and sprayed. Laces and any tags that might have to be attached to the shoes, such as shoe care instructions, are also attached. The shoes, at last, get packaged in boxes.

Shoe Making- How Shoes are MadeFootwear can be defined as garments that are worn on the feet. There main purpose is protecting one's feet. Of late, footwear has become an important component of fashion accessories. Although, their basic purpose remains that of protection, adornment or defining style statement has become their additional and a significant function. There are many types of footwear- shoes, boots, sandals, slippers etc. They are further categorized into many more types.

Shoes and Shoe makingShoes are further divided into many categories such as athletic shoes also known as sneakers, galoshes, high heels, Stiletto heels, kitten heels, lace-up shoes, high-Tops, loafers, Mary Janes, platform shoes, school shoes and many others. Shoemaking can be considered a traditional handicraft profession. However, now it has been largely

Page 5: Shoe Making

taken over by industrial manufacture of footwear. A variety of materials are used for making shoes- leather fabrics, plastic, rubber, fabrics, wood, jute fabrics, and metal. More than 200 operations are required for making a pair of shoes. However, with the development of modern machines, a pair of shoes can be made in very less time as each step in its manufacturing is generally performed by a separate footwear making machine.

Parts of a ShoeA shoe consists of sole, insole, outsole, midsole, heel, and vamp (upper). They are the basic parts of a shoe that are mostly included in all types off shoes. Other parts of a shoe are lining, tongue, quarter, welt and backstay. These parts are included as per the design of the shoes.

Sole: The exterior bottom part of a shoe is the sole.

Insole: The interior bottom of a shoe, which sits directly beneath the foot, is its insole. They can be removable and replaceable too. In some of the shoes, extra insoles are often added for comfort, health or other reasons, such as to control the shape, moisture, or smell of the shoe.

Outsole: It is that layer of the shoe that is in direct contact with the ground. These can be made of various materials like leather, natural or synthetic rubber etc. Often the heel of the sole is made from rubber for durability and traction and the front is made of leather for style. Special purpose shoes often have refined modifications, for example, athletic cleats have spikes embedded in the outsole to grip the ground, dance shoes have much softer or harder soles.

Midsole: The layer that lies between the outsole and the insole for shock absorption, is the midsole. Some special shoes, like running shoes have other materials for shock absorption, that usually lie beneath the heel where one puts the most pressure down. Materials used for midsoles depend on the shoe manufacturers. Some shoes can be made even without a midsole.

Heel: The rear part at the bottom of a shoe is the heel. It supports the heels of the feet. Heels of a shoe are often made from the same material as the sole of the shoe. It can be high for fashion purpose or for making a person look taller. They are also flat for comfort and practical use.

Page 6: Shoe Making

Vamp, or upper: The upper part of a shoe that helps in holding the shoe onto the foot is the vamp or simply called the upper. This part is often embellished or given different styles to make shoes attractive.

Shoe Making ProcessA footwear company has mainly four departments in which a progressive route is followed for producing finished shoes. These are- Clicking or Cutting Department, Closing or Machining Department, Lasting & Making Department, Finishing Department and the Shoe Room.

Clicking or Cutting DepartmentIn this department, the top part of the shoe or the "upper" is made. The clicking operative is given skins of leather, mostly cow leather but not restricted to this type of leather. Using metal strip knives, the worker cuts out pieces of various shapes that will take the form of "uppers". This operation needs a high level of skill as the expensive leather has to be wasted at the minimum level possible. Leather may also have various defects on the surface such as barbed wire scratches which needs to be avoided, so that they are not used for the uppers.

Closing or Machining DepartmentHere the component pieces are sewn together by highly skilled machinists so as to produce the completed upper. The work is divided in stages. In early stages, the pieces are sewn together on the flat machine. In the later stages, when the upper is no longer flat and has become three-dimensional, the machine called post machine is used. The sewing surface of the machine is elevated on a post to enable the operative to sew the three dimensional upper. Various edge treatments are also done onto the leather for giving an attractive look to the finished upper. At this stage only, the eyelets are also inserted in order to accommodate the laces in the finished shoes.

Lasting & Making DepartmentThe completed uppers are molded into a shape of foot with the help of a "Last". Last is a plastic shape that simulates the foot

Page 7: Shoe Making

shape. It is later removed from the finished shoe to be used further in making other shoes. Firstly, an insole to the bottom of the last is attached. It is only a temporary attachment. Sometimes, mostly when welted shoes are manufactured, the insole has a rib attached to its under edge. The upper is stretched and molded over the last and attached to the insole rib. After the procedure completes, a "lasted shoe" is obtained. Now, the welt- a strip of leather or plastic- is sewn onto the shoe through the rib. The upper and all the surplus material is trimmed off the seam. The sole is then attached to the welt and both are stitched together. The heel is then attached which completes the "making" of the shoe.

That was the process for heeled shoes. When a flat shoe is in the making, there are considerably fewer operations. The insoles in this case is flat and when the uppers are 'lasted', they are glued down to the surface of the inner side of the insole. The part of the upper, that is glued down, is then roughed with a wire brush to take off the smooth finish of the leather. This is done because rough surface absorbs glue to give a stronger bond. The soles are usually cut, finished and prepared as a separate component so that when they are glued to the lasted upper, the result is a complete and finished shoe. Soles can also be pre-molded as a separate component out of various synthetic materials and again glued to the lasted upper to complete the shoe.

Finishing Department and the Shoe RoomThe finishing of a shoe depends on the material used for making it. If made of leather, the sole edge and heel are trimmed and buffed to give a smooth finish. To give them an attractive finish and to ensure that the edge is waterproof, they are stained, polished and waxed. The bottom of the sole is often lightly buffed, stained and polished and different types of patterns are marked on the surface to give it a craft finished look. A "finished shoe" has now been made.

For shoe room operation, an internal sock is fitted into shoe which can be of any length- full, half or quarter. They usually have the manufacturers details or a brand name wherever applicable. Depending on the materials used for the uppers, they are then cleaned, polished and sprayed. Laces and any tags that might have to be attached to the shoes, such as shoe care instructions, are also attached. The shoes, at last, get packaged in boxes.

Page 8: Shoe Making

Parts of Shoes:

Parts

Sole

Gluing a new outsole to an athletic shoe

The bottom of a shoe is called the sole.

Insole

The insole is the interior bottom of a shoe, which sits directly beneath the foot under the footbed (also known as sock liner). The purpose of insole is to attach to the lasting margin of the upper, which is wrapped around the last during the closing of the shoe during the lasting operation. Insoles are usually made of cellulosic paper board or synthetic non woven insole board. Many shoes have removable and replaceable footbeds. Extra cushioning is often added for comfort (to control the shape, moisture, or smell of the shoe) or health reasons (to help deal with defects in the natural shape of the foot or positioning of the foot during standing or walking). Basically, this is a main part of shoes which can absorb foot sweat. Footbeds should typically use foam cushioning sheets like latex and eva, which provide good wearing comfort of the shoe.

Outsole

The outsole is the layer in direct contact with the ground. Dress shoes often have leather or resin rubber outsoles; casual or work-oriented shoes have outsoles made of natural rubber or a synthetic material like Polyurethane. The outsole may

Page 9: Shoe Making

comprise a single piece, or may be an assembly of separate pieces of different materials. Often the heel of the sole has a rubber plate for durability and traction, while the front is leather for style. Specialized shoes will often have modifications on this design: athletic or so called cleated shoes like soccer, rugby, baseball and golf shoes have spikes embedded in the outsole to grip the ground.

Midsole

The layer in between the outsole and the insole that is typically there for shock absorption. Some types of shoes, like running shoes, have another material for shock absorption, usually beneath the heel of the foot, where one puts the most pressure down. Different companies use different materials for the midsoles of their shoes. Some shoes may not have a midsole at all.

Heel

The bottom rear part of a shoe is the heel. Its function is to support the heel of the foot. They are often made of the same material as the sole of the shoe. This part can be high for fashion or to make the person look taller, or flat for a more practical and comfortable use.

Women's high heel pump

Vamp/upper

Every shoe has an upper part that helps hold the shoe onto the foot. In the simplest cases, such as sandals or flip-flops, this may be nothing more than a few straps for holding the sole in place. Closed footwear, such as boots, trainers and most men's shoes, will have a more complex upper. This part is often decorated or is made in a certain style to look attractive.

Page 10: Shoe Making

Lateral/medial

The outside part of the shoe is referred to as the lateral and the inside facing part of the shoe is the medial. This can be in reference to either the outsole or the vamp.

Accessories Shoehorn : can be used to insert a foot into a shoe by keeping the shoe

open and providing a smooth surface for the foot to slide upon. Shoe tree : placed inside the shoe when user is not wearing it, to help

maintain the shoe's shape.

Heel grip: used to prevent the shoe from slipping on the heel if the fit is not perfect

Foam tap: a small foam pad placed under the ball of the foot to push the foot up and back if the shoe is too loose.

Shoe polishing equipment:

o Shoe polish : a waxy material spread on shoes to improve appearance, glossiness, and provide protection.

o Shoe brush and polishing cloth: used to apply polish to shoes.

Overshoes or galoshes: a rubber covering placed over shoes for rain and snow protection.

(Orthopedic) shoe insert: insert of various materials for cushioning, improved fit, or reduced abrasion. These include padding and inner linings. Inserts may also be used to correct foot problems.

Shoe bag: a bag that protects shoes against damage when they are not being worn.

Shoe stretcher: a tool for making a shoe longer or wider or for reducing discomfort in areas of a shoe.

Snow shoe : a wooden or leather piece which increases the area of ground covered by the shoe.

Shoelaces : a system used to secure shoes.

Page 11: Shoe Making

Types

Dress and casual

Dress shoes are characterized by smooth and supple leather uppers, leather soles, and narrow sleek figure. Casual shoes are characterized by sturdy leather uppers, non-leather outsoles, and wide profile.

Some designs of dress shoes can be worn by either gender. The majority of dress shoes have an upper covering, commonly made of leather, enclosing most of the lower foot, but not covering the ankles. This upper part of the shoe is often made without apertures or openings, but may also be made with openings or even itself consist of a series of straps, e.g. an open toe featured in women's shoes. Shoes with uppers made high to cover the ankles are also available; a shoe with the upper rising above the ankle is usually considered a boot but certain styles may be referred to as high-topped shoes or high-tops. Usually, a high-topped shoe is secured by laces or zippers, although some styles have elastic inserts to ease slipping the shoe on.

Men's

This male dress shoe, known as a blucher, is distinguished by its open lacing.

Men's shoes can be categorized by how they are closed:

Oxfords (also referred as "Balmorals"): the vamp has a V-shaped slit to which the laces are attached; also known as "closed lacing". The word "Oxford" is sometimes used by American clothing companies to market shoes that are not Balmorals, such as Blüchers.

Page 12: Shoe Making

Blüchers (American), Derbys (British): the laces are tied to two pieces of leather independently attached to the vamp; also known as "open lacing".

Monk-straps : a buckle and strap instead of lacing

Slip-ons : There are no lacings or fastenings. The popular loafers are part of this category, as well as less popular styles, such as elastic-sided shoes.

Men's shoes can also be decorated in various ways:

Plain-toes: have a sleek appearance and no extra decorations on the vamp. Cap-toes: has an extra layer of leather that "caps" the toe. This is possibly

the most popular decoration.

Brogues (American: wing-tips): The toe of the shoe is covered with a perforated panel, the wing-tip, which extends down either side of the shoe. Brogues can be found in both balmoral and blucher styles.

Women's

Women's shoes on display in a shop window, 2005

There is a large variety of shoes available for women, in addition to most of the men's styles being more accepted as unisex. Some broad categories are:

High-heeled footwear is footwear that raises the heels, typically 2 inches (5 cm) or more above the toes, commonly worn by women for formal occasions or social outings. Variants include kitten heels (typically 1½-

Page 13: Shoe Making

2 inches high) and stilletto heels (with a very narrow heel post) and wedge heels (with a wedge-shaped sole rather than a heel post).

Sneaker boot or sneaker pump: a shoe that looks like an athletic shoe, but is equipped with a heel, making it a kind of novelty dress shoe.

Mules are shoes or slippers with no fitting around the heel (i.e. they are backless)

Slingbacks are shoes which are secured by a strap behind the heel, rather than over the top of the foot.

Ballet flats , known in the UK as ballerinas, ballet pumps or skimmers, are shoes with a very low heel and a relatively short vamp, exposing much of the instep. They are popular for warm-weather wear, and may be seen as more comfortable than shoes with a higher heel.

Court shoes , known in the US as pumps, are typically high-heeled, slip-on dress shoes.

Unisex

The flip-flop sandal, worn both by men and women

Clog Platform shoe : shoe with very thick soles and heels

Moccasin : originated by Native Americans, a soft shoe without a heel and usually made of leather.

Page 14: Shoe Making

Sandals : open shoes consisting of a sole and various straps, leaving much of the foot exposed to air. They are thus popular for warm-weather wear, because they let the foot be cooler than a closed-toed shoe would.

Espadrilles are casual flat warm-weather shoes of a style which originated in the Pyrenees. They usually have a cotton or canvas upper and a flexible sole of rope or rubber. There are high-heeled versions for women.

Saddle shoe: leather shoe with a contrasting saddle-shaped band over the instep, typically white uppers with black "saddle".

Slip-on shoe : a dress or casual shoe without laces; often with tassels, buckles, or coin-holders (penny loafers).

Boat shoes , also known as "deck shoes": similar to a loafer, but more casual. Laces are usually simple leather with no frills. Typically made of leather and featuring a soft white sole to avoid marring or scratching a boat deck. The first boat shoe was invented in 1935 by Paul Sperry.

Boots : Long shoes (covering the ankle) frequently made of leather. Some are designed to be used in times of bad weather, or simply as an alternate style of casual or dress wear. Styles include rubber boots and snow boots, as well as work boots and hiking boots.

Slippers : For indoor use, commonly worn with pajamas.

Vibram FiveFingers, meant to simulate the "natural" experience of going barefoot, while protecting the foot

Sneakers or Canvas shoes

AthleticToday the most popular shoe globally: the sports shoe adapted for everyday use

Men's and women's athletic shoes and special function shoes often have less difference between the sexes than in dress shoes. In many cases these shoes can be worn by either sex. Emphasis tends to be more on function than style.

Running shoes: very similar to above, with additional emphasis on cushioning.

Track spikes : lightweight; often with plastic or metal cleats

Page 15: Shoe Making

Cleat (shoe ) : a type of shoe featuring molded or removable studs. Usually worn while playing sports such as rugby, football, American football, or baseball.

Golf shoes: with "spikes" for better grip in grass and wet ground. Originally the spikes or "cleats" were made of metal but replaceable "soft spikes" made of synthetic plastic-like materials with prongs distributed radially around the edge of each spike are much more common today (and are required on many golf courses since they cause less damage to the greens).

Bowling shoes: intermediate style between ordinary dress shoes and athletic shoes. They have harder rubber soles/heels so as not to damage bowling alley floors. They are often rented or loaned at bowling alleys.

Climbing shoes : a shoe designed for rock climbing. They typically have a close fit, little if any padding, and a smooth sticky rubber sole with an extended rubber rand.

Hiking shoes or boots: usually have a high somewhat stiff upper with many lace eyelets, to provide ankle support on uneven terrain, with extra large traction on the sole.

Walking shoes: have a more flexible sole than the running shoe, lighter in weight than the hiking boot, may have air holes, may not be water proof.

Skating shoes: typically called skates. They have various attachments for skating on the bottom of the shoe portion.

o Ice skates

o Roller skates

o Inline skates

Ski boot : a large, thick plastic boot specially designed for attachment to the ski.

Skate shoes : specifically designed for use in Skateboarding, the shoes are manufactured with flat soles as to allow a skateboarder to have better grip

Page 16: Shoe Making

when riding a skateboard. They are very wide and have extra layers of padding to protect the skateboarders feet.

Cycling shoes are equipped with a metal or plastic cleat to interface with clipless pedals, as well as a stiff sole to maximize power transfer and support the foot.

Snowshoes are special shoes for walking in thick snow. In temperate climates, snowshoes are used for mostly recreational purposes in winter.

Wrestling shoes are light, flexible shoes that mimic bare feet while providing additional traction and protection.

Orthopedic

Orthopedic or "comfort" shoes are made with pedorthic and anatomically-correct comfort qualities, such as padded removable footbeds, wide toe boxes and arch support are made especially for those with problematic feet.

Dance Pointe shoes are designed for ballet dancing. These have a toe box that is

stiffened with glue and a hardened sole so the dancer can stand on the tips of their toes. They are secured by elastic straps and ribbons that are tied to the dancer's ankles.

Ballet shoes are soft, highly pliable shoes made of canvas or leather, with either continuous or two-part sole (also called split-sole). The sole is typically made of leather, with thicker material under the ball and heel of the foot, and thinner and thus more flexible material under the arch so that the foot can be pointed to its utmost. Ballet slippers are usually secured by elastics that cross over the top of the foot. They are most commonly pink, white, black, or pale tan, although they may be made in specialty colours such as red or blue.

Ghillies are soft shoes that are used in Irish dance, Scottish country dance, and highland dance.

Jazz shoes typically have a two-part, rubberized sole (also called split-sole) to provide both flexibility and traction, and a low (one inch or shorter) heel. They are secured to the foot by laces or elastic inserts.

Page 17: Shoe Making

Tango and Flamenco shoes are used for dancing the tango or flamenco.

Ballroom shoes fall into two categories: Ballroom and Latin American. Both are characterised by suede soles. Men's ballroom shoes are typically lace-ups with one-inch heels and patent leather uppers. Ladies' ballroom shoes are typically court shoes with two-inch heels, made of fabric that can be colored to match the dancer's dress. In contrast to the low Ballroom heel, which evenly distributes weight across the foot, Latin American shoes have higher heels designed to shift weight onto the toes. Latin shoes are also more flexible than ballroom shoes. Men's Latin shoes typically have 1.5- to 2-inch high, shaped heels, while Ladies' Latin shoes have 2,5-inch to 3-inch heels. Ladies shoes are typically open-toed and strapped.

Dance sneakers. Also known as dansneakers, these are a combination of a sneaker and a dance shoe, with a reinforced rubber toe.

Character shoes have a one to three inch heel, which is usually made of leather, and often have one or more straps across the instep to secure it to the foot. They may come in soft-soled (suede) or hard-soled varieties. They may be converted to tap shoes by attaching taps.

Foot thongs are known by various names depending on the manufacturer, including dance paws, foot undies, and foot paws. They are slip-on, partial foot covers that protect the ball of a dancer's foot from skin abrasions while executing turns. From a distance, flesh colored foot thongs give a dancer the appearance of having bare feet.

Tap shoes have metal plates mounted to the bottoms of the toe and heel. The metal plates, which are known as taps, make a loud sound when struck against a hard performance surface. Tap shoes, which are used in tap dancing, may be made from any style of shoe to which taps can be attached.

Pointe shoesBallet shoes

Jazz shoes. This style is frequently worn by acro dancers A foot thong, viewed

from the bottom

Page 18: Shoe Making

GhilliesLadies' ballroom shoes

Mens' ballroom shoes Tap shoes

Types of leather:

Different Types of LeatherLeather is the end product of the processing done on the skin or hide of animals. There are number of various types of leather available these days. The article gives a brief information on different types of leather...

Skin of cattle like cow, sheep is mainly used for production of leather. Leather has a wide range of uses and is used for making clothes, upholstery and shoes.

Types of leather can be classified on the basis of the part of hide used as raw material for making the leather. Grain, with respect to leather, is referred to as the part of hide that is obtained by removing the hair. Grain can be split into two layers: top grain and split. Split has no content of the natural grain and is the lower layer of the natural grain obtained.

Page 19: Shoe Making

Full grain or Top grain Leather

Full grain leather is the leather that is formed just by removing the hair present on the epidermis of the hide. It is the most natural form of leather, since no polishing and finishing is done to the grain obtained. There are two methods of giving a finished touch to full grain leather, they are aniline and semi-aniline. In aniline finish the leather is dipped in a transparent dye that colors the leather uniformly, without loosing its natural effect. When an extra coating is given to prevent stain, it is called as semi-aniline finish. Full grain leather is the most expensive and good quality leather. This leather, being in its most natural form, is the most popular type of leather. It is much expensive and comfortable type of leather.

Split Leather

Split leather is leather made from the remaining part of the hide after the removal of the top grain. This leather is harder and cheaper than the full grain leather. Split leather is comparatively more fragile and gets easily damaged, if not handled properly. Split leathers are often used to produce suede leather.

Corrected grain Leather

Full grain leather, polished to remove or correct the scratches present on the grain is referred to, as corrected grain. The hides used in the corrected grain leather are of inferior quality. Semi-aniline and pigmented can be the two types of finishing techniques used for corrected grain leather. Most of the times, pigmented leather is preferred as it is better at correcting the scratches.

Nubuck/ Buffed / Suede Leather

Page 20: Shoe Making

It is formed by splitting the layer between the grain and the hide. The surface of this leather is buffed to create a soft layer. It is cheaper as compared to full grain leather. However, it is fragile in nature, as it quickly gets damaged, when it comes in contact with any liquid. Suede is not a good option to be used for upholstery. The surface of this type of leather has a velvet like feeling.

Bicast or Coated Leather

It is a synthetic type of split leather, that is made by applying a layer of polyurethane to the surface. This leather is more durable as compared to other types of leathers. Initially, this type of leather was used only in the shoe industry, but these days, because of its high durability and economic price, it is also used for upholstery in commercial places like bars.

Faux Leather

It is man made leather, and is durable because of the synthetic materials used. It is widely used in commercial places for the furniture, because it is the cheapest type of leather and does not get damaged soon, and looks like original leather.

All the different types of leather have their own characteristic look, feel and thus, are used for different purposes. Leather has always been in fashion as it looks classic and is durable.

Originality of leather

How many times have we seen the advertisement claiming "Genuine leather" Or "Quality Leather". Just what is Genuine Leather, or Quality Leather, how do I know I didn't get ripped off?

Page 21: Shoe Making

First, what is leather. Leather simply stated is the skin of an animal. So as long as the material is made from the skin of an animal, they can claim "Genuine Leather". Quality leather is a different story. When you finish reading this, you will be able to look at a leather garment and tell immediately if it is quality or not.

You may or may not have noticed that the flea markets, grocery stores, drug stores, and warehouse department stores have been selling the "Genuine Leather" Coats, Jackets, backpacks and luggage. They are of a patchwork design, and usually lined. These are typically made of lambskin leather and being sold for unreal cheap prices. There is nothing wrong with lambskin leather. In fact it is the leather of choice for any leather that is worn close to the skin. The lining too is a benefit if it is used for comfort or insulation. The patchwork design is the first indication that this is poor quality leather. The patchwork design is because they swept the scraps off the floor from the manufacture of other garments, fed them through a machine to sew the scraps together, created another sheet of leather and made more garments. The leather itself could made of various grades.

Let's talk about grades of leather. There are 3 primary grades of leather:

Grade 1 or "full-Grain" clear, supple, and clean, is consistent in color, has the highest yield of over 90% and the surface is smoothest.

Grade 2 is less consistent in color, has a yield of 78% and the surface is slightly imperfect.

Grade 3 is a blotchy and very inconsistent in color, has a yield of 40% and the surface is very imperfect and will feel stiff, partly from the excessive coating needed to hide imperfections.

These grades are standard no mater what type of animal the leather came from. There are a lot of different types of animals that are used for leather. Everything from lamb to cow, and alligator to Ostrich. The two most popular for use in garments are lamb and cow. For the sake of this article we will discuss these two.

LAMBSKIN

The softest, thinnest, most supple skin. A Buttery texture and finely grained. Stretches well and tends to reshape after wearing - has a type of memory. Drapes

Page 22: Shoe Making

well, flows, and has good movement - very form fitting. Higher-end leather-wear. Classy and more fashionable look.

LAMB TOUCH COW or COW NAPPA

Thin, Soft and supple - close in look and feel to lamb but is not lamb. A Smoother finish and finer texture to cow hide. Lightweight - has good movement and draping ability. Sportswear and outerwear. Dressed-up, fashionable look. Coats skirts, pants, and vests.

COW HIDE

Very tough wearing and durable. Heaviest of the cowhides. Very noticeable texture skin and grainy. Mostly outerwear - especially jackets. Weekend casual, ready-to-wear.

Ok, now we know the different grades, and types of leather, how do we know we got the good stuff? First, use your eyes. A very good way to tell if you're purchasing a garment of HIGH-quality leather is to look at the seams and needle marks. If they seem to be a different color than the garment itself this could mean that the garment is dyed on the surface only - surface-dyed as opposed to aniline-dyed leather (dyed on both sides).

Surface-dyed leather is much different to aniline-dyed leather because surface-dying is like adding a coat of paint to wood. It merely covers up the wood's natural surface and defects. Aniline-dyed leather is like adding varnish to wood, varnish allows the woods natural beauty to shine through by penetrating the surface instead of covering it up. The natural beauty of high-quality leather is visible through a sheer, rich aniline dye.

Check the items for overall color and craftsmanship. While all skins contain some natural marks, there should not be any large unsightly blemishes on the piece you are inspecting. A good manufacturer of leather apparel will not use leather of 2nd or 3rd grade.

Next, use your nose. The garment should smell like leather, not chemicals. And while we are on the subject of chemicals, you want leather that has not been treated with Azo Dye. Azo Dye is toxic and has been linked to many skin reactions.

Page 23: Shoe Making

And lastly, feel it. Is it soft to the touch, is it smooth. It should be free of any bumps and it should flex easily. It should not be stiff and hard to bend.

Be sure to read my next article on how to care for your leather garments.

Jim owns and operates an on line store of sexy leather [http://www.hotstuffleatherandlace.net/sexy-leather/index.php] where he also publishes many articles and information. Feel free to visit our forums and comment on any of his articles. You can find him here [http://www.hotstuffleatherandlace.net]

NEXT ARTICLE

How to Check for Leather QualityBy sherry hammond, eHow Member

Top Grain Waxed Leather

User-Submitted Article

Leather is one of the most desirable and fashionable fabrics in the marketplace today. From furniture to clothing and accessories, leather goods make up a large percent of items purchase by consumers. Leather is available in various colors, styles, and of course prices. So how do you make sure you are getting the highest quality leather for your money. One of the first indicators of leather quality is the price. Remember, the old saying, "you get what you pay for." Therefore, as a consumer or leather hobbyist, there are ways to get past the price and evaluate what you are actually buying, just take your time and thoroughly inspect the leather to determine the differences in the leather quality, consider these steps:

Page 24: Shoe Making

Difficulty: Easy

Instructions

Things You'll Need: Good Judgement Sense of Touch

Great Eyesight

A Good Nose

1.

The animal, bird, fish, or reptile from which the leather is from makes the biggest difference in quality. Exotic leather's are the most desirable right now in the market. Exotic leather is know for it's durability, and richness. However, keep in mind that even within this category of leather quality will vary. For example, not all ostrich is equal. The tanning process is another factor that determines leather quality. As soon as the hide is taken, it begins to deteriorate. This makes perfect sense because hide, like skin starts as living tissue. How the hide is cared for immediately after removal and what is used to preserve it is very important to how high the quality will be. Try to find out a little bit about the source if possible. Keep in mind the finest leather quality is clear, supple, and clean, which is called full-grain, lower leather quality will feel stiff, mostly from the excessive coating needed to hide imperfections.

2.

You want to find leather that shows the variations in the grain, look and feel for fat wrinkles that naturally covered fatty areas of the animal. Don't forget to smell the leather. I know this may sound weird but it is an important step. If it has a rotten smell or chemical smell, then it is not good quality. Poor quality

Page 25: Shoe Making

leather will omit an odor from the processing chemicals and in some rare cases, the leather will smell decayed or even retain the smell of manure. Simply look for something that looks, smells and feels natural.

3.

Next you want to consider where the leather came from, keep in mind that without a doubt, European leather is the finest you will find anywhere, but also the most expensive. So if price is a factor for you that Northern American leather may be a better choice. Their leather is very good quality and usually more affordable. Other locations will be the most affordable, but also of lesser quality.

Trust your instincts, and use your senses, (sight, smell, and touch that is)and you will be able to purchase high quality leather products to accent your home, and your wardrobe.

More information about Leather:-

There are various types of leather available in the global market depending on the end usage. These different types of leather are obtained by making them undergo through different processes to give them the required properties. The difference in types of leather can also come from the animal source they are derived from. Accordingly there are leathers made from cow, sheep, goat, pig, lamb etc. Some of the popular types of leather used for manufacturing various leather accessories are:

Vegetable Tanned Leather– This type of leather is obtained from Oak (bark) and other plants that contain natural tannins. Vegetable tanned leather can stretch easily, especially when soaked in water. It can also be easily carved, molded, hardened, dyed, painted, oiled, waxed... It is one of the most expensive types of leather.

Chrome Tanned Leather– This type of leather is made by soaking the hide of the animal in an acidic bath; high in chromium. The lather is less stretchy, and cannot be carved or molded etc. The leather is relatively cheap.

Page 26: Shoe Making

Oil Tanned Leather- This type of leather is one of the most supple leathers available. It has a slightly oily feel to the surface.

Combination Leather – This type of leather can either be vegetable-oil tanned or made from some other combination.

Buckskin Leather – This type of leather is incredibly soft, iswater friendly, strong, and stretchy hide that has been treated in a basic solution made from wood ash or lime.

Deer hide- This type of leather is made from deer hide and has to be treated by more "modern" tanning methods. The leather is soft and supple, but it lacks many of the other qualities of true buckskin.

Rawhide - This type of leather is made from untanned hide, usually of cattle. It is stiff when dry, and becomes supple and very stretchy when wet.

Cowhide- This type of leather is the most common and is a staple of any supplier. It can be somewhat stiff at times but is available in many weights and cuts.

Pig skin hide- This type of leather is tougher than cowhide of the same weight.

Napa leather-This type of leather is made from sheep skin and is naturally one of the softest leathers and is closest in "hand" to a baby's skin.

Full Grain Leather - This type of leather is the best leather money can buy. Iit is made from the strongest part of leather and hence is quite durable.

Top Grain Leather -This type of leather id of second highest grade. It is obtained by splitting it from the blemished hide and is sanded and refinished.

Genuine Leather – This type of leather is made from layers of an animal's hide that remain after the top is split off for the better grades.

Bonded Leather - This type of leather is leather's bottom and is weak. It degrades quickly and hence not used much.

Page 27: Shoe Making

Nubuck Leather - Nubuck leather is the top grain cow hide with brush kind of effect having short nap along with softness. It is more stain resistant compared to other anilines.

Split Leather - Split leather is made of inner layers of a hide that have been split away from the upper layers. It is very fragile typically used in the form suede.