Shrink Wrap Tunnel TOP AND SIDE VIEW AIRFLOW 40% AVAILABLE MATERIALS *Stainless steel rods available on request. (4.8mm Diameter Rods) *Custom widths, available on request. The width is critical to your application please request an official sample for your design and test requirements. Shrink Wrap Tunnel Belt Material Colour Standard Rod Material Maximum Belt Pull Kg/m² Belt Weight kg/m² Continuous Temp. Range C° Agency Approvals FDA Heat Resistant Nylon Grey PBT 1850 6.24 10 to 195 x 10th 67.5mm 76mm 84mm 20th 151mm 159mm 169mm 15th 107mm 120mm 128mm Sprocket Sizes 18th Hub Diameter (C) 132mm Pitch Diameter (D) 146mm Outside Diameter (E) 152mm 12th 82mm 92mm 101mm C D E SPROCKET & BELT Benefits of using Plastic over Steel Up to 60% lighter. (Energy Saving) Easier to maintain. (Fitment, removal and service) Easier to clean. (Non-stick surface) Locally produced, 24h lead on all spares. Watch the belt in action on Youtube. Link: https://goo.gl/S6TJ8K A shrink wrap tunnel is designed for one purpose only, to shrink PLASTIC around / to the product passing through it, for further packaging / distribution. The belt must run for 5 - 10min after the heating elements have been turned off. This ensures the tunnel has time to cool down so that the PLASTIC belt is not exposed to excessive heat for an excessive time frame, resulting in premature belt failure. Run down Procedure PLASTIC MODULAR STEEL WIRE MESH V/S A B A 9mm B Pin Hole Diameter 5mm Module Width: 300mm A B 150mm MW25 Flush Grid Belting (25mm Pitch) Straight Running Applications Interlocking belt surface provides continuous product support and allows for accumulative applications without scratching or damaging the product. Bi-Directional Running is possible. Vibration-free belt movement minimizes product shifting and damage. Snap-in rods for easy assembly and repair. Countersunk rod heads provide smooth even edges, reducing risk of edges catching and breaking. 40% Open surface area for superior airflow. x Stainless Steel 9.64 2120 10 to 195 Shrink Wrap Tunnel Belting Shrink Wrap Tunnel Belting Heat Resistant Nylon Grey

Shrink Wrap Tunnel Belting BEbeltingedge.com/wp-content/.../SHRINK_WRAP_TUNNEL...A shrink wrap tunnel is designed for one purpose only, to shrink PLASTIC around / to the product passing

Download PDF Report

Upload
others
View
11
Download
0

Embed Size (px)

Citation preview

Shrink Wrap Tunnel

TOP AND SIDE VIEW AIRFLOW 40%

AVAILABLE MATERIALS

*Stainless steel rods available on request. (4.8mm Diameter Rods)*Custom widths, available on request. The width is critical to your application please request an official sample for your design and test requirements.

Shrink Wrap Tunnel

BeltMaterial

ColourStandard

RodMaterial

Maximum BeltPull

Kg/m²

Belt Weight

kg/m²

ContinuousTemp. Range

C°

AgencyApprovals

FDA

Heat Resistant Nylon Grey PBT 1850 6.24 10 to 195 x

10th67.5mm

76mm

84mm

20th151mm

159mm

169mm

15th107mm

120mm

128mm

Sprocket Sizes 18thHub Diameter (C) 132mm

Pitch Diameter (D) 146mm

Outside Diameter (E) 152mm

12th82mm

92mm

101mm

C D E

SPROCKET & BELT

Benefits of using Plastic over SteelUp to 60% lighter. (Energy Saving)Easier to maintain. (Fitment, removal and service)Easier to clean. (Non-stick surface)Locally produced, 24h lead on all spares.Watch the belt in action on Youtube. Link: https://goo.gl/S6TJ8K

A shrink wrap tunnel is designed for one purpose only, to shrink PLASTIC around / to the product passing through it, for further packaging / distribution. The belt must run for 5 - 10min after the heating elements have been turned off. This ensures the tunnel has time to cool down so that the PLASTIC belt is not exposed to excessive heat for an excessive time frame, resulting in premature belt failure.

Run down Procedure

PLASTIC MODULAR

STEEL WIRE MESH

V/S

A 9mmB Pin Hole Diameter 5mm

Module Width: 300mm

150mm

MW25 Flush Grid Belting (25mm Pitch)Straight Running Applications

Interlocking belt surface provides continuous product support and allows for accumulative applications without scratching or damaging the product.Bi-Directional Running is possible.Vibration-free belt movement minimizes product shifting and damage.Snap-in rods for easy assembly and repair.Countersunk rod heads provide smooth even edges, reducing risk of edges catching and breaking.40% Open surface area for superior airflow.

xStainless Steel 9.642120 10 to 195

Shrink Wrap Tunnel BeltingShrink Wrap Tunnel Belting

Heat Resistant Nylon Grey