To begin insert your Windows XP Professional CD on USB CD ROM drive,( make sure that your USB CDROM pluged with system) and re

TRAX System Installation and Configuration Guide

This article is a step-by-step instruction for those who want to install TRAX on compatible computer. This document provides guidelines to install on Microsoft Windows XP environment. the process would be too much different If you use other operating system rather than Microsoft Windows.

This installation process distinguished by two steps (Step 1 is OS Installation and Step 2 is TRAX Installation step by step). If you follow the instruction properly then you must feel this is the most ever easy and comprehensive process.

Before starting installation you should make sure that all necessary are abele able. The minimum requirements for TRAX System are:USB CD Rom Drive.Windows XP Professional CD with license.Device Driver and TRAX software loaded flash Drive(Pen1)Advertisements flv with HTML loaded flash Drive(Pen2)

Step 1(OS Installation)To begin insert your Windows XP Professional CD on USB CD ROM drive,( make sure that your USB CDROM plugged with system) and reboot you computer. A message "Press any key to boot from CD....." will appear, press the space bar to continue.Setup will now inspect your computer hardware and configuration.Setup now prepares your computer for install.From this menu press "ENTER" to begin the installWindows XP License agreement, read, and if you agree press "F8" to continue, press "ESC" if you disagree. If you disagree setup will finishNow you have to select where to install XP. Press "ENTER" to confirm the partition you want to install into.Now you need to format the hard drive, NTFS is recommended, but you must use FAT32(Quick). Make your decision using the arrow keys and press enter.The hard drive will now format,and then setup will begin to copy files.Setup now initializes the Windows XP configuration.It is now time to restart Windows XP, press "ENTER" to speed up process, otherwise Windows will do it itself in 15 seconds.Boot will recognize that the XP CD is in the drive, DO NOT press any keys, let setup bypass the CD boot.Windows is now booting.The install process continues.Now your regional and language options. Your mouse should now be active, so click on "CUSTOMIZE". Now select your Standards and Formats, plus your location, then click "OK".Now that you have made all necessary changes click on "NEXT".File in name with CSTC and if you wish you file in the Organization section Like "Simoco". Click "NEXT" when ready.Now it is time for your product key. The product key will be on the packaging that XP was supplied with. It is 25 digits long. Some OEM computers will have a sticker on the side or back with your product key. Input the key and press "NEXT".Now select and file your computer name as per instruction and do not put any admin password. and press "NEXT".In Date and Time settings must select "Kolkata,Bombay,Channai" option, change as need be, then press "NEXT".Windows will then continue installing.If a network card has been detected then you will get the following menu. Select "TYPICAL SETTINGS" and press next. This configured later in Windows.More network configuration, change workgroup name "CSTCTRAX" and click "NEXT".Windows will continue installing.It is now time to restart Windows XP again, press "ENTER" to speed up process, otherwise Windows will do it itself in 15 seconds.Boot will recognize that the XP CD is in the drive, DO NOT press any keys, let setup bypass the CD boot.Windows will continue loading.Windows will now adjust your resolution, click "OK" to continue.click on"OK" tab.Windows will now apply changes. Be patient.Windows "WELCOME" screenIf you are lucky you will have no drivers to install, but chances are the next step will be to install them. Check out device manager for unknown devices, likely items are wireless Network Cards, Sound Cards, Graphics Cards, plus Chipset Inf you have. All drivers you could get from TRAX Installation pen1(pen1:\Driver folder).To begin step-2 Installation make sure that all device drivers are installed properly.Step 2 (TRAX Installation step by step)In screen saver option make it always on(write click on desktop, Properties, click on Screen Saver, click on power, on power schemes select always on, point to turn off monitor and select Never click Apply then OK tab.Double click on comdisable.msi then open command prompt and write cd program files\Microsoft COMDisable then type comdisable/COM1,Enter.Install Avro Keyboard by double clicking on setup_avrokeyboard_4.5.1.exe file and select Use Bangla(Indian) Language.Install Flash player (use Flash Player 10.0.22.87 (IE).exe)Copy ANT,TRAX and InVehicleGPS folder to drive C.In the console tree, right-click Computer Management (Local), and then select Properties. On the Advanced tab, click Performance Options, and under Virtual memory, click No paging file, click on SET Tab then press OK Tab.Install Java by double clicking on jdk-1_5_0_14-windows-i586-p.exe file.Open javaxcomm folder, comm.jar should be placed in:%JAVA_HOME%/lib%JAVA_HOME%/jre/lib/extwin32com.dll should be placed in:%JAVA_HOME%/bin%JAVA_HOME%/jre/bin%windir%System32javax.comm.properties should be placed in: %JAVA_HOME%/lib %JAVA_HOME%/jre/libAll files from WTK folder paste on C:\WINDOWS\system32 From command prompt type instexnt install then press Enter.Go to C:\Documents and Settings\Administrator\Start Menu\Programs\Startup, write click on blank area then NEW Shortcut Then type c:\InVehicleGPS\bin\ startup.bat, next, Finish.